diff options
Diffstat (limited to 'drivers/iio/chemical')
| -rw-r--r-- | drivers/iio/chemical/Kconfig | 14 | ||||
| -rw-r--r-- | drivers/iio/chemical/bme680.h | 6 | ||||
| -rw-r--r-- | drivers/iio/chemical/bme680_core.c | 54 | ||||
| -rw-r--r-- | drivers/iio/chemical/bme680_i2c.c | 21 | ||||
| -rw-r--r-- | drivers/iio/chemical/bme680_spi.c | 115 |
5 files changed, 139 insertions, 71 deletions
diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig index d5d146e9e372..92c684d2b67e 100644 --- a/drivers/iio/chemical/Kconfig +++ b/drivers/iio/chemical/Kconfig @@ -64,6 +64,7 @@ config IAQCORE config PMS7003 tristate "Plantower PMS7003 particulate matter sensor" depends on SERIAL_DEV_BUS + select IIO_TRIGGERED_BUFFER help Say Y here to build support for the Plantower PMS7003 particulate matter sensor. @@ -71,6 +72,19 @@ config PMS7003 To compile this driver as a module, choose M here: the module will be called pms7003. +config SENSIRION_SGP30 + tristate "Sensirion SGPxx gas sensors" + depends on I2C + select CRC8 + help + Say Y here to build I2C interface support for the following + Sensirion SGP gas sensors: + * SGP30 gas sensor + * SGPC3 low power gas sensor + + To compile this driver as module, choose M here: the + module will be called sgp30. + config SPS30 tristate "SPS30 particulate matter sensor" depends on I2C diff --git a/drivers/iio/chemical/bme680.h b/drivers/iio/chemical/bme680.h index 0ae89b87e2d6..4edc5d21cb9f 100644 --- a/drivers/iio/chemical/bme680.h +++ b/drivers/iio/chemical/bme680.h @@ -2,11 +2,9 @@ #ifndef BME680_H_ #define BME680_H_ -#define BME680_REG_CHIP_I2C_ID 0xD0 -#define BME680_REG_CHIP_SPI_ID 0x50 +#define BME680_REG_CHIP_ID 0xD0 #define BME680_CHIP_ID_VAL 0x61 -#define BME680_REG_SOFT_RESET_I2C 0xE0 -#define BME680_REG_SOFT_RESET_SPI 0x60 +#define BME680_REG_SOFT_RESET 0xE0 #define BME680_CMD_SOFTRESET 0xB6 #define BME680_REG_STATUS 0x73 #define BME680_SPI_MEM_PAGE_BIT BIT(4) diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c index 70c1fe4366f4..ccde4c65ff93 100644 --- a/drivers/iio/chemical/bme680_core.c +++ b/drivers/iio/chemical/bme680_core.c @@ -63,9 +63,23 @@ struct bme680_data { s32 t_fine; }; +static const struct regmap_range bme680_volatile_ranges[] = { + regmap_reg_range(BME680_REG_MEAS_STAT_0, BME680_REG_GAS_R_LSB), + regmap_reg_range(BME680_REG_STATUS, BME680_REG_STATUS), + regmap_reg_range(BME680_T2_LSB_REG, BME680_GH3_REG), +}; + +static const struct regmap_access_table bme680_volatile_table = { + .yes_ranges = bme680_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(bme680_volatile_ranges), +}; + const struct regmap_config bme680_regmap_config = { .reg_bits = 8, .val_bits = 8, + .max_register = 0xef, + .volatile_table = &bme680_volatile_table, + .cache_type = REGCACHE_RBTREE, }; EXPORT_SYMBOL(bme680_regmap_config); @@ -316,6 +330,10 @@ static s16 bme680_compensate_temp(struct bme680_data *data, s64 var1, var2, var3; s16 calc_temp; + /* If the calibration is invalid, attempt to reload it */ + if (!calib->par_t2) + bme680_read_calib(data, calib); + var1 = (adc_temp >> 3) - (calib->par_t1 << 1); var2 = (var1 * calib->par_t2) >> 11; var3 = ((var1 >> 1) * (var1 >> 1)) >> 12; @@ -583,8 +601,7 @@ static int bme680_gas_config(struct bme680_data *data) return ret; } -static int bme680_read_temp(struct bme680_data *data, - int *val, int *val2) +static int bme680_read_temp(struct bme680_data *data, int *val) { struct device *dev = regmap_get_device(data->regmap); int ret; @@ -617,10 +634,9 @@ static int bme680_read_temp(struct bme680_data *data, * compensate_press/compensate_humid to get compensated * pressure/humidity readings. */ - if (val && val2) { - *val = comp_temp; - *val2 = 100; - return IIO_VAL_FRACTIONAL; + if (val) { + *val = comp_temp * 10; /* Centidegrees to millidegrees */ + return IIO_VAL_INT; } return ret; @@ -635,7 +651,7 @@ static int bme680_read_press(struct bme680_data *data, s32 adc_press; /* Read and compensate temperature to get a reading of t_fine */ - ret = bme680_read_temp(data, NULL, NULL); + ret = bme680_read_temp(data, NULL); if (ret < 0) return ret; @@ -668,7 +684,7 @@ static int bme680_read_humid(struct bme680_data *data, u32 comp_humidity; /* Read and compensate temperature to get a reading of t_fine */ - ret = bme680_read_temp(data, NULL, NULL); + ret = bme680_read_temp(data, NULL); if (ret < 0) return ret; @@ -761,7 +777,7 @@ static int bme680_read_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_PROCESSED: switch (chan->type) { case IIO_TEMP: - return bme680_read_temp(data, val, val2); + return bme680_read_temp(data, val); case IIO_PRESSURE: return bme680_read_press(data, val, val2); case IIO_HUMIDITYRELATIVE: @@ -867,8 +883,28 @@ int bme680_core_probe(struct device *dev, struct regmap *regmap, { struct iio_dev *indio_dev; struct bme680_data *data; + unsigned int val; int ret; + ret = regmap_write(regmap, BME680_REG_SOFT_RESET, + BME680_CMD_SOFTRESET); + if (ret < 0) { + dev_err(dev, "Failed to reset chip\n"); + return ret; + } + + ret = regmap_read(regmap, BME680_REG_CHIP_ID, &val); + if (ret < 0) { + dev_err(dev, "Error reading chip ID\n"); + return ret; + } + + if (val != BME680_CHIP_ID_VAL) { + dev_err(dev, "Wrong chip ID, got %x expected %x\n", + val, BME680_CHIP_ID_VAL); + return -ENODEV; + } + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; diff --git a/drivers/iio/chemical/bme680_i2c.c b/drivers/iio/chemical/bme680_i2c.c index b2f805b6b36a..de9c9e3d23ea 100644 --- a/drivers/iio/chemical/bme680_i2c.c +++ b/drivers/iio/chemical/bme680_i2c.c @@ -23,8 +23,6 @@ static int bme680_i2c_probe(struct i2c_client *client, { struct regmap *regmap; const char *name = NULL; - unsigned int val; - int ret; regmap = devm_regmap_init_i2c(client, &bme680_regmap_config); if (IS_ERR(regmap)) { @@ -33,25 +31,6 @@ static int bme680_i2c_probe(struct i2c_client *client, return PTR_ERR(regmap); } - ret = regmap_write(regmap, BME680_REG_SOFT_RESET_I2C, - BME680_CMD_SOFTRESET); - if (ret < 0) { - dev_err(&client->dev, "Failed to reset chip\n"); - return ret; - } - - ret = regmap_read(regmap, BME680_REG_CHIP_I2C_ID, &val); - if (ret < 0) { - dev_err(&client->dev, "Error reading I2C chip ID\n"); - return ret; - } - - if (val != BME680_CHIP_ID_VAL) { - dev_err(&client->dev, "Wrong chip ID, got %x expected %x\n", - val, BME680_CHIP_ID_VAL); - return -ENODEV; - } - if (id) name = id->name; diff --git a/drivers/iio/chemical/bme680_spi.c b/drivers/iio/chemical/bme680_spi.c index d0b7bdd3f066..3b838068a7e4 100644 --- a/drivers/iio/chemical/bme680_spi.c +++ b/drivers/iio/chemical/bme680_spi.c @@ -12,28 +12,93 @@ #include "bme680.h" +struct bme680_spi_bus_context { + struct spi_device *spi; + u8 current_page; +}; + +/* + * In SPI mode there are only 7 address bits, a "page" register determines + * which part of the 8-bit range is active. This function looks at the address + * and writes the page selection bit if needed + */ +static int bme680_regmap_spi_select_page( + struct bme680_spi_bus_context *ctx, u8 reg) +{ + struct spi_device *spi = ctx->spi; + int ret; + u8 buf[2]; + u8 page = (reg & 0x80) ? 0 : 1; /* Page "1" is low range */ + + if (page == ctx->current_page) + return 0; + + /* + * Data sheet claims we're only allowed to change bit 4, so we must do + * a read-modify-write on each and every page select + */ + buf[0] = BME680_REG_STATUS; + ret = spi_write_then_read(spi, buf, 1, buf + 1, 1); + if (ret < 0) { + dev_err(&spi->dev, "failed to set page %u\n", page); + return ret; + } + + buf[0] = BME680_REG_STATUS; + if (page) + buf[1] |= BME680_SPI_MEM_PAGE_BIT; + else + buf[1] &= ~BME680_SPI_MEM_PAGE_BIT; + + ret = spi_write(spi, buf, 2); + if (ret < 0) { + dev_err(&spi->dev, "failed to set page %u\n", page); + return ret; + } + + ctx->current_page = page; + + return 0; +} + static int bme680_regmap_spi_write(void *context, const void *data, size_t count) { - struct spi_device *spi = context; + struct bme680_spi_bus_context *ctx = context; + struct spi_device *spi = ctx->spi; + int ret; u8 buf[2]; memcpy(buf, data, 2); + + ret = bme680_regmap_spi_select_page(ctx, buf[0]); + if (ret) + return ret; + /* * The SPI register address (= full register address without bit 7) * and the write command (bit7 = RW = '0') */ buf[0] &= ~0x80; - return spi_write_then_read(spi, buf, 2, NULL, 0); + return spi_write(spi, buf, 2); } static int bme680_regmap_spi_read(void *context, const void *reg, size_t reg_size, void *val, size_t val_size) { - struct spi_device *spi = context; + struct bme680_spi_bus_context *ctx = context; + struct spi_device *spi = ctx->spi; + int ret; + u8 addr = *(const u8 *)reg; + + ret = bme680_regmap_spi_select_page(ctx, addr); + if (ret) + return ret; - return spi_write_then_read(spi, reg, reg_size, val, val_size); + addr |= 0x80; /* bit7 = RW = '1' */ + + return spi_write_then_read(spi, &addr, 1, val, val_size); } static struct regmap_bus bme680_regmap_bus = { @@ -46,8 +111,8 @@ static struct regmap_bus bme680_regmap_bus = { static int bme680_spi_probe(struct spi_device *spi) { const struct spi_device_id *id = spi_get_device_id(spi); + struct bme680_spi_bus_context *bus_context; struct regmap *regmap; - unsigned int val; int ret; spi->bits_per_word = 8; @@ -57,45 +122,21 @@ static int bme680_spi_probe(struct spi_device *spi) return ret; } + bus_context = devm_kzalloc(&spi->dev, sizeof(*bus_context), GFP_KERNEL); + if (!bus_context) + return -ENOMEM; + + bus_context->spi = spi; + bus_context->current_page = 0xff; /* Undefined on warm boot */ + regmap = devm_regmap_init(&spi->dev, &bme680_regmap_bus, - &spi->dev, &bme680_regmap_config); + bus_context, &bme680_regmap_config); if (IS_ERR(regmap)) { dev_err(&spi->dev, "Failed to register spi regmap %d\n", (int)PTR_ERR(regmap)); return PTR_ERR(regmap); } - ret = regmap_write(regmap, BME680_REG_SOFT_RESET_SPI, - BME680_CMD_SOFTRESET); - if (ret < 0) { - dev_err(&spi->dev, "Failed to reset chip\n"); - return ret; - } - - /* after power-on reset, Page 0(0x80-0xFF) of spi_mem_page is active */ - ret = regmap_read(regmap, BME680_REG_CHIP_SPI_ID, &val); - if (ret < 0) { - dev_err(&spi->dev, "Error reading SPI chip ID\n"); - return ret; - } - - if (val != BME680_CHIP_ID_VAL) { - dev_err(&spi->dev, "Wrong chip ID, got %x expected %x\n", - val, BME680_CHIP_ID_VAL); - return -ENODEV; - } - /* - * select Page 1 of spi_mem_page to enable access to - * to registers from address 0x00 to 0x7F. - */ - ret = regmap_write_bits(regmap, BME680_REG_STATUS, - BME680_SPI_MEM_PAGE_BIT, - BME680_SPI_MEM_PAGE_1_VAL); - if (ret < 0) { - dev_err(&spi->dev, "failed to set page 1 of spi_mem_page\n"); - return ret; - } - return bme680_core_probe(&spi->dev, regmap, id->name); } |