diff options
Diffstat (limited to 'drivers/ieee1394/sbp2.c')
| -rw-r--r-- | drivers/ieee1394/sbp2.c | 2203 |
1 files changed, 823 insertions, 1380 deletions
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index 6986ac188281..4325aac7733d 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -29,13 +29,26 @@ * driver. It also registers as a SCSI lower-level driver in order to accept * SCSI commands for transport using SBP-2. * - * You may access any attached SBP-2 storage devices as if they were SCSI - * devices (e.g. mount /dev/sda1, fdisk, mkfs, etc.). + * You may access any attached SBP-2 (usually storage devices) as regular + * SCSI devices. E.g. mount /dev/sda1, fdisk, mkfs, etc.. * - * Current Issues: + * See http://www.t10.org/drafts.htm#sbp2 for the final draft of the SBP-2 + * specification and for where to purchase the official standard. * - * - Error Handling: SCSI aborts and bus reset requests are handled somewhat - * but the code needs additional debugging. + * TODO: + * - look into possible improvements of the SCSI error handlers + * - handle Unit_Characteristics.mgt_ORB_timeout and .ORB_size + * - handle Logical_Unit_Number.ordered + * - handle src == 1 in status blocks + * - reimplement the DMA mapping in absence of physical DMA so that + * bus_to_virt is no longer required + * - debug the handling of absent physical DMA + * - replace CONFIG_IEEE1394_SBP2_PHYS_DMA by automatic detection + * (this is easy but depends on the previous two TODO items) + * - make the parameter serialize_io configurable per device + * - move all requests to fetch agent registers into non-atomic context, + * replace all usages of sbp2util_node_write_no_wait by true transactions + * Grep for inline FIXME comments below. */ #include <linux/blkdev.h> @@ -49,7 +62,6 @@ #include <linux/list.h> #include <linux/module.h> #include <linux/moduleparam.h> -#include <linux/pci.h> #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/stat.h> @@ -98,20 +110,20 @@ * (probably due to PCI latency/throughput issues with the part). You can * bump down the speed if you are running into problems. */ -static int max_speed = IEEE1394_SPEED_MAX; -module_param(max_speed, int, 0644); -MODULE_PARM_DESC(max_speed, "Force max speed (3 = 800mb, 2 = 400mb, 1 = 200mb, 0 = 100mb)"); +static int sbp2_max_speed = IEEE1394_SPEED_MAX; +module_param_named(max_speed, sbp2_max_speed, int, 0644); +MODULE_PARM_DESC(max_speed, "Force max speed " + "(3 = 800Mb/s, 2 = 400Mb/s, 1 = 200Mb/s, 0 = 100Mb/s)"); /* * Set serialize_io to 1 if you'd like only one scsi command sent * down to us at a time (debugging). This might be necessary for very * badly behaved sbp2 devices. - * - * TODO: Make this configurable per device. */ -static int serialize_io = 1; -module_param(serialize_io, int, 0444); -MODULE_PARM_DESC(serialize_io, "Serialize I/O coming from scsi drivers (default = 1, faster = 0)"); +static int sbp2_serialize_io = 1; +module_param_named(serialize_io, sbp2_serialize_io, int, 0444); +MODULE_PARM_DESC(serialize_io, "Serialize I/O coming from scsi drivers " + "(default = 1, faster = 0)"); /* * Bump up max_sectors if you'd like to support very large sized @@ -121,10 +133,10 @@ MODULE_PARM_DESC(serialize_io, "Serialize I/O coming from scsi drivers (default * the Oxsemi sbp2 chipsets have no problems supporting very large * transfer sizes. */ -static int max_sectors = SBP2_MAX_SECTORS; -module_param(max_sectors, int, 0444); -MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = " - __stringify(SBP2_MAX_SECTORS) ")"); +static int sbp2_max_sectors = SBP2_MAX_SECTORS; +module_param_named(max_sectors, sbp2_max_sectors, int, 0444); +MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported " + "(default = " __stringify(SBP2_MAX_SECTORS) ")"); /* * Exclusive login to sbp2 device? In most cases, the sbp2 driver should @@ -139,9 +151,10 @@ MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = " * concurrent logins. Depending on firmware, four or two concurrent logins * are possible on OXFW911 and newer Oxsemi bridges. */ -static int exclusive_login = 1; -module_param(exclusive_login, int, 0644); -MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device (default = 1)"); +static int sbp2_exclusive_login = 1; +module_param_named(exclusive_login, sbp2_exclusive_login, int, 0644); +MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device " + "(default = 1)"); /* * If any of the following workarounds is required for your device to work, @@ -179,123 +192,123 @@ MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0" ", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE) ", or a combination)"); -/* - * Export information about protocols/devices supported by this driver. - */ -static struct ieee1394_device_id sbp2_id_table[] = { - { - .match_flags = IEEE1394_MATCH_SPECIFIER_ID | IEEE1394_MATCH_VERSION, - .specifier_id = SBP2_UNIT_SPEC_ID_ENTRY & 0xffffff, - .version = SBP2_SW_VERSION_ENTRY & 0xffffff}, - {} -}; - -MODULE_DEVICE_TABLE(ieee1394, sbp2_id_table); - -/* - * Debug levels, configured via kernel config, or enable here. - */ - -#define CONFIG_IEEE1394_SBP2_DEBUG 0 -/* #define CONFIG_IEEE1394_SBP2_DEBUG_ORBS */ -/* #define CONFIG_IEEE1394_SBP2_DEBUG_DMA */ -/* #define CONFIG_IEEE1394_SBP2_DEBUG 1 */ -/* #define CONFIG_IEEE1394_SBP2_DEBUG 2 */ -/* #define CONFIG_IEEE1394_SBP2_PACKET_DUMP */ - -#ifdef CONFIG_IEEE1394_SBP2_DEBUG_ORBS -#define SBP2_ORB_DEBUG(fmt, args...) HPSB_ERR("sbp2(%s): "fmt, __FUNCTION__, ## args) -static u32 global_outstanding_command_orbs = 0; -#define outstanding_orb_incr global_outstanding_command_orbs++ -#define outstanding_orb_decr global_outstanding_command_orbs-- -#else -#define SBP2_ORB_DEBUG(fmt, args...) do {} while (0) -#define outstanding_orb_incr do {} while (0) -#define outstanding_orb_decr do {} while (0) -#endif - -#ifdef CONFIG_IEEE1394_SBP2_DEBUG_DMA -#define SBP2_DMA_ALLOC(fmt, args...) \ - HPSB_ERR("sbp2(%s)alloc(%d): "fmt, __FUNCTION__, \ - ++global_outstanding_dmas, ## args) -#define SBP2_DMA_FREE(fmt, args...) \ - HPSB_ERR("sbp2(%s)free(%d): "fmt, __FUNCTION__, \ - --global_outstanding_dmas, ## args) -static u32 global_outstanding_dmas = 0; -#else -#define SBP2_DMA_ALLOC(fmt, args...) do {} while (0) -#define SBP2_DMA_FREE(fmt, args...) do {} while (0) -#endif -#if CONFIG_IEEE1394_SBP2_DEBUG >= 2 -#define SBP2_DEBUG(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args) -#define SBP2_INFO(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args) -#define SBP2_NOTICE(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args) -#define SBP2_WARN(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args) -#elif CONFIG_IEEE1394_SBP2_DEBUG == 1 -#define SBP2_DEBUG(fmt, args...) HPSB_DEBUG("sbp2: "fmt, ## args) -#define SBP2_INFO(fmt, args...) HPSB_INFO("sbp2: "fmt, ## args) -#define SBP2_NOTICE(fmt, args...) HPSB_NOTICE("sbp2: "fmt, ## args) -#define SBP2_WARN(fmt, args...) HPSB_WARN("sbp2: "fmt, ## args) -#else -#define SBP2_DEBUG(fmt, args...) do {} while (0) -#define SBP2_INFO(fmt, args...) HPSB_INFO("sbp2: "fmt, ## args) -#define SBP2_NOTICE(fmt, args...) HPSB_NOTICE("sbp2: "fmt, ## args) -#define SBP2_WARN(fmt, args...) HPSB_WARN("sbp2: "fmt, ## args) -#endif - -#define SBP2_ERR(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args) -#define SBP2_DEBUG_ENTER() SBP2_DEBUG("%s", __FUNCTION__) +#define SBP2_INFO(fmt, args...) HPSB_INFO("sbp2: "fmt, ## args) +#define SBP2_ERR(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args) /* * Globals */ +static void sbp2scsi_complete_all_commands(struct sbp2_lu *, u32); +static void sbp2scsi_complete_command(struct sbp2_lu *, u32, struct scsi_cmnd *, + void (*)(struct scsi_cmnd *)); +static struct sbp2_lu *sbp2_alloc_device(struct unit_directory *); +static int sbp2_start_device(struct sbp2_lu *); +static void sbp2_remove_device(struct sbp2_lu *); +static int sbp2_login_device(struct sbp2_lu *); +static int sbp2_reconnect_device(struct sbp2_lu *); +static int sbp2_logout_device(struct sbp2_lu *); +static void sbp2_host_reset(struct hpsb_host *); +static int sbp2_handle_status_write(struct hpsb_host *, int, int, quadlet_t *, + u64, size_t, u16); +static int sbp2_agent_reset(struct sbp2_lu *, int); +static void sbp2_parse_unit_directory(struct sbp2_lu *, + struct unit_directory *); +static int sbp2_set_busy_timeout(struct sbp2_lu *); +static int sbp2_max_speed_and_size(struct sbp2_lu *); -static void sbp2scsi_complete_all_commands(struct scsi_id_instance_data *scsi_id, - u32 status); - -static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id, - u32 scsi_status, struct scsi_cmnd *SCpnt, - void (*done)(struct scsi_cmnd *)); - -static struct scsi_host_template scsi_driver_template; static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xA, 0xB, 0xC }; -static void sbp2_host_reset(struct hpsb_host *host); - -static int sbp2_probe(struct device *dev); -static int sbp2_remove(struct device *dev); -static int sbp2_update(struct unit_directory *ud); - static struct hpsb_highlevel sbp2_highlevel = { - .name = SBP2_DEVICE_NAME, - .host_reset = sbp2_host_reset, + .name = SBP2_DEVICE_NAME, + .host_reset = sbp2_host_reset, }; static struct hpsb_address_ops sbp2_ops = { - .write = sbp2_handle_status_write + .write = sbp2_handle_status_write }; #ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA +static int sbp2_handle_physdma_write(struct hpsb_host *, int, int, quadlet_t *, + u64, size_t, u16); +static int sbp2_handle_physdma_read(struct hpsb_host *, int, quadlet_t *, u64, + size_t, u16); + static struct hpsb_address_ops sbp2_physdma_ops = { - .read = sbp2_handle_physdma_read, - .write = sbp2_handle_physdma_write, + .read = sbp2_handle_physdma_read, + .write = sbp2_handle_physdma_write, }; #endif + +/* + * Interface to driver core and IEEE 1394 core + */ +static struct ieee1394_device_id sbp2_id_table[] = { + { + .match_flags = IEEE1394_MATCH_SPECIFIER_ID | IEEE1394_MATCH_VERSION, + .specifier_id = SBP2_UNIT_SPEC_ID_ENTRY & 0xffffff, + .version = SBP2_SW_VERSION_ENTRY & 0xffffff}, + {} +}; +MODULE_DEVICE_TABLE(ieee1394, sbp2_id_table); + +static int sbp2_probe(struct device *); +static int sbp2_remove(struct device *); +static int sbp2_update(struct unit_directory *); + static struct hpsb_protocol_driver sbp2_driver = { - .name = "SBP2 Driver", + .name = SBP2_DEVICE_NAME, .id_table = sbp2_id_table, .update = sbp2_update, .driver = { - .name = SBP2_DEVICE_NAME, - .bus = &ieee1394_bus_type, .probe = sbp2_probe, .remove = sbp2_remove, }, }; + +/* + * Interface to SCSI core + */ +static int sbp2scsi_queuecommand(struct scsi_cmnd *, + void (*)(struct scsi_cmnd *)); +static int sbp2scsi_abort(struct scsi_cmnd *); +static int sbp2scsi_reset(struct scsi_cmnd *); +static int sbp2scsi_slave_alloc(struct scsi_device *); +static int sbp2scsi_slave_configure(struct scsi_device *); +static void sbp2scsi_slave_destroy(struct scsi_device *); +static ssize_t sbp2_sysfs_ieee1394_id_show(struct device *, + struct device_attribute *, char *); + +static DEVICE_ATTR(ieee1394_id, S_IRUGO, sbp2_sysfs_ieee1394_id_show, NULL); + +static struct device_attribute *sbp2_sysfs_sdev_attrs[] = { + &dev_attr_ieee1394_id, + NULL +}; + +static struct scsi_host_template sbp2_shost_template = { + .module = THIS_MODULE, + .name = "SBP-2 IEEE-1394", + .proc_name = SBP2_DEVICE_NAME, + .queuecommand = sbp2scsi_queuecommand, + .eh_abort_handler = sbp2scsi_abort, + .eh_device_reset_handler = sbp2scsi_reset, + .slave_alloc = sbp2scsi_slave_alloc, + .slave_configure = sbp2scsi_slave_configure, + .slave_destroy = sbp2scsi_slave_destroy, + .this_id = -1, + .sg_tablesize = SG_ALL, + .use_clustering = ENABLE_CLUSTERING, + .cmd_per_lun = SBP2_MAX_CMDS, + .can_queue = SBP2_MAX_CMDS, + .emulated = 1, + .sdev_attrs = sbp2_sysfs_sdev_attrs, +}; + + /* * List of devices with known bugs. * @@ -363,8 +376,6 @@ static inline void sbp2util_be32_to_cpu_buffer(void *buffer, int length) for (length = (length >> 2); length--; ) temp[length] = be32_to_cpu(temp[length]); - - return; } /* @@ -376,8 +387,6 @@ static inline void sbp2util_cpu_to_be32_buffer(void *buffer, int length) for (length = (length >> 2); length--; ) temp[length] = cpu_to_be32(temp[length]); - - return; } #else /* BIG_ENDIAN */ /* Why waste the cpu cycles? */ @@ -385,339 +394,247 @@ static inline void sbp2util_cpu_to_be32_buffer(void *buffer, int length) #define sbp2util_cpu_to_be32_buffer(x,y) do {} while (0) #endif -#ifdef CONFIG_IEEE1394_SBP2_PACKET_DUMP -/* - * Debug packet dump routine. Length is in bytes. - */ -static void sbp2util_packet_dump(void *buffer, int length, char *dump_name, - u32 dump_phys_addr) -{ - int i; - unsigned char *dump = buffer; - - if (!dump || !length || !dump_name) - return; - - if (dump_phys_addr) - printk("[%s, 0x%x]", dump_name, dump_phys_addr); - else - printk("[%s]", dump_name); - for (i = 0; i < length; i++) { - if (i > 0x3f) { - printk("\n ..."); - break; - } - if ((i & 0x3) == 0) - printk(" "); - if ((i & 0xf) == 0) - printk("\n "); - printk("%02x ", (int)dump[i]); - } - printk("\n"); - - return; -} -#else -#define sbp2util_packet_dump(w,x,y,z) do {} while (0) -#endif - -static DECLARE_WAIT_QUEUE_HEAD(access_wq); +static DECLARE_WAIT_QUEUE_HEAD(sbp2_access_wq); /* * Waits for completion of an SBP-2 access request. * Returns nonzero if timed out or prematurely interrupted. */ -static int sbp2util_access_timeout(struct scsi_id_instance_data *scsi_id, - int timeout) +static int sbp2util_access_timeout(struct sbp2_lu *lu, int timeout) { - long leftover = wait_event_interruptible_timeout( - access_wq, scsi_id->access_complete, timeout); + long leftover; - scsi_id->access_complete = 0; + leftover = wait_event_interruptible_timeout( + sbp2_access_wq, lu->access_complete, timeout); + lu->access_complete = 0; return leftover <= 0; } -/* Frees an allocated packet */ -static void sbp2_free_packet(struct hpsb_packet *packet) +static void sbp2_free_packet(void *packet) { hpsb_free_tlabel(packet); hpsb_free_packet(packet); } -/* This is much like hpsb_node_write(), except it ignores the response - * subaction and returns immediately. Can be used from interrupts. +/* + * This is much like hpsb_node_write(), except it ignores the response + * subaction and returns immediately. Can be used from atomic context. */ static int sbp2util_node_write_no_wait(struct node_entry *ne, u64 addr, - quadlet_t *buffer, size_t length) + quadlet_t *buf, size_t len) { struct hpsb_packet *packet; - packet = hpsb_make_writepacket(ne->host, ne->nodeid, - addr, buffer, length); + packet = hpsb_make_writepacket(ne->host, ne->nodeid, addr, buf, len); if (!packet) return -ENOMEM; - hpsb_set_packet_complete_task(packet, - (void (*)(void *))sbp2_free_packet, - packet); - + hpsb_set_packet_complete_task(packet, sbp2_free_packet, packet); hpsb_node_fill_packet(ne, packet); - if (hpsb_send_packet(packet) < 0) { sbp2_free_packet(packet); return -EIO; } - return 0; } -static void sbp2util_notify_fetch_agent(struct scsi_id_instance_data *scsi_id, - u64 offset, quadlet_t *data, size_t len) +static void sbp2util_notify_fetch_agent(struct sbp2_lu *lu, u64 offset, + quadlet_t *data, size_t len) { - /* - * There is a small window after a bus reset within which the node - * entry's generation is current but the reconnect wasn't completed. - */ - if (unlikely(atomic_read(&scsi_id->state) == SBP2LU_STATE_IN_RESET)) + /* There is a small window after a bus reset within which the node + * entry's generation is current but the reconnect wasn't completed. */ + if (unlikely(atomic_read(&lu->state) == SBP2LU_STATE_IN_RESET)) return; - if (hpsb_node_write(scsi_id->ne, - scsi_id->sbp2_command_block_agent_addr + offset, + if (hpsb_node_write(lu->ne, lu->command_block_agent_addr + offset, data, len)) SBP2_ERR("sbp2util_notify_fetch_agent failed."); - /* - * Now accept new SCSI commands, unless a bus reset happended during - * hpsb_node_write. - */ - if (likely(atomic_read(&scsi_id->state) != SBP2LU_STATE_IN_RESET)) - scsi_unblock_requests(scsi_id->scsi_host); + + /* Now accept new SCSI commands, unless a bus reset happended during + * hpsb_node_write. */ + if (likely(atomic_read(&lu->state) != SBP2LU_STATE_IN_RESET)) + scsi_unblock_requests(lu->shost); } -static void sbp2util_write_orb_pointer(void *p) +static void sbp2util_write_orb_pointer(struct work_struct *work) { + struct sbp2_lu *lu = container_of(work, struct sbp2_lu, protocol_work); quadlet_t data[2]; - data[0] = ORB_SET_NODE_ID( - ((struct scsi_id_instance_data *)p)->hi->host->node_id); - data[1] = ((struct scsi_id_instance_data *)p)->last_orb_dma; + data[0] = ORB_SET_NODE_ID(lu->hi->host->node_id); + data[1] = lu->last_orb_dma; sbp2util_cpu_to_be32_buffer(data, 8); - sbp2util_notify_fetch_agent(p, SBP2_ORB_POINTER_OFFSET, data, 8); + sbp2util_notify_fetch_agent(lu, SBP2_ORB_POINTER_OFFSET, data, 8); } -static void sbp2util_write_doorbell(void *p) +static void sbp2util_write_doorbell(struct work_struct *work) { - sbp2util_notify_fetch_agent(p, SBP2_DOORBELL_OFFSET, NULL, 4); + struct sbp2_lu *lu = container_of(work, struct sbp2_lu, protocol_work); + + sbp2util_notify_fetch_agent(lu, SBP2_DOORBELL_OFFSET, NULL, 4); } -/* - * This function is called to create a pool of command orbs used for - * command processing. It is called when a new sbp2 device is detected. - */ -static int sbp2util_create_command_orb_pool(struct scsi_id_instance_data *scsi_id) +static int sbp2util_create_command_orb_pool(struct sbp2_lu *lu) { - struct sbp2scsi_host_info *hi = scsi_id->hi; + struct sbp2_fwhost_info *hi = lu->hi; int i; unsigned long flags, orbs; - struct sbp2_command_info *command; + struct sbp2_command_info *cmd; - orbs = serialize_io ? 2 : SBP2_MAX_CMDS; + orbs = sbp2_serialize_io ? 2 : SBP2_MAX_CMDS; - spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags); + spin_lock_irqsave(&lu->cmd_orb_lock, flags); for (i = 0; i < orbs; i++) { - command = kzalloc(sizeof(*command), GFP_ATOMIC); - if (!command) { - spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, - flags); + cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC); + if (!cmd) { + spin_unlock_irqrestore(&lu->cmd_orb_lock, flags); return -ENOMEM; } - command->command_orb_dma = - pci_map_single(hi->host->pdev, &command->command_orb, - sizeof(struct sbp2_command_orb), - PCI_DMA_TODEVICE); - SBP2_DMA_ALLOC("single command orb DMA"); - command->sge_dma = - pci_map_single(hi->host->pdev, - &command->scatter_gather_element, - sizeof(command->scatter_gather_element), - PCI_DMA_BIDIRECTIONAL); - SBP2_DMA_ALLOC("scatter_gather_element"); - INIT_LIST_HEAD(&command->list); - list_add_tail(&command->list, &scsi_id->sbp2_command_orb_completed); - } - spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); + cmd->command_orb_dma = dma_map_single(hi->host->device.parent, + &cmd->command_orb, + sizeof(struct sbp2_command_orb), + DMA_TO_DEVICE); + cmd->sge_dma = dma_map_single(hi->host->device.parent, + &cmd->scatter_gather_element, + sizeof(cmd->scatter_gather_element), + DMA_BIDIRECTIONAL); + INIT_LIST_HEAD(&cmd->list); + list_add_tail(&cmd->list, &lu->cmd_orb_completed); + } + spin_unlock_irqrestore(&lu->cmd_orb_lock, flags); return 0; } -/* - * This function is called to delete a pool of command orbs. - */ -static void sbp2util_remove_command_orb_pool(struct scsi_id_instance_data *scsi_id) +static void sbp2util_remove_command_orb_pool(struct sbp2_lu *lu) { - struct hpsb_host *host = scsi_id->hi->host; + struct hpsb_host *host = lu->hi->host; struct list_head *lh, *next; - struct sbp2_command_info *command; + struct sbp2_command_info *cmd; unsigned long flags; - spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags); - if (!list_empty(&scsi_id->sbp2_command_orb_completed)) { - list_for_each_safe(lh, next, &scsi_id->sbp2_command_orb_completed) { - command = list_entry(lh, struct sbp2_command_info, list); - - /* Release our generic DMA's */ - pci_unmap_single(host->pdev, command->command_orb_dma, + spin_lock_irqsave(&lu->cmd_orb_lock, flags); + if (!list_empty(&lu->cmd_orb_completed)) + list_for_each_safe(lh, next, &lu->cmd_orb_completed) { + cmd = list_entry(lh, struct sbp2_command_info, list); + dma_unmap_single(host->device.parent, + cmd->command_orb_dma, sizeof(struct sbp2_command_orb), - PCI_DMA_TODEVICE); - SBP2_DMA_FREE("single command orb DMA"); - pci_unmap_single(host->pdev, command->sge_dma, - sizeof(command->scatter_gather_element), - PCI_DMA_BIDIRECTIONAL); - SBP2_DMA_FREE("scatter_gather_element"); - - kfree(command); + DMA_TO_DEVICE); + dma_unmap_single(host->device.parent, cmd->sge_dma, + sizeof(cmd->scatter_gather_element), + DMA_BIDIRECTIONAL); + kfree(cmd); } - } - spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); + spin_unlock_irqrestore(&lu->cmd_orb_lock, flags); return; } /* - * This function finds the sbp2_command for a given outstanding command - * orb.Only looks at the inuse list. + * Finds the sbp2_command for a given outstanding command ORB. + * Only looks at the in-use list. */ static struct sbp2_command_info *sbp2util_find_command_for_orb( - struct scsi_id_instance_data *scsi_id, dma_addr_t orb) + struct sbp2_lu *lu, dma_addr_t orb) { - struct sbp2_command_info *command; + struct sbp2_command_info *cmd; unsigned long flags; - spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags); - if (!list_empty(&scsi_id->sbp2_command_orb_inuse)) { - list_for_each_entry(command, &scsi_id->sbp2_command_orb_inuse, list) { - if (command->command_orb_dma == orb) { - spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); - return command; + spin_lock_irqsave(&lu->cmd_orb_lock, flags); + if (!list_empty(&lu->cmd_orb_inuse)) + list_for_each_entry(cmd, &lu->cmd_orb_inuse, list) + if (cmd->command_orb_dma == orb) { + spin_unlock_irqrestore( + &lu->cmd_orb_lock, flags); + return cmd; } - } - } - spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); - - SBP2_ORB_DEBUG("could not match command orb %x", (unsigned int)orb); - + spin_unlock_irqrestore(&lu->cmd_orb_lock, flags); return NULL; } /* - * This function finds the sbp2_command for a given outstanding SCpnt. - * Only looks at the inuse list. - * Must be called with scsi_id->sbp2_command_orb_lock held. + * Finds the sbp2_command for a given outstanding SCpnt. + * Only looks at the in-use list. + * Must be called with lu->cmd_orb_lock held. */ static struct sbp2_command_info *sbp2util_find_command_for_SCpnt( - struct scsi_id_instance_data *scsi_id, void *SCpnt) + struct sbp2_lu *lu, void *SCpnt) { - struct sbp2_command_info *command; + struct sbp2_command_info *cmd; - if (!list_empty(&scsi_id->sbp2_command_orb_inuse)) - list_for_each_entry(command, &scsi_id->sbp2_command_orb_inuse, list) - if (command->Current_SCpnt == SCpnt) - return command; + if (!list_empty(&lu->cmd_orb_inuse)) + list_for_each_entry(cmd, &lu->cmd_orb_inuse, list) + if (cmd->Current_SCpnt == SCpnt) + return cmd; return NULL; } -/* - * This function allocates a command orb used to send a scsi command. - */ static struct sbp2_command_info *sbp2util_allocate_command_orb( - struct scsi_id_instance_data *scsi_id, - struct scsi_cmnd *Current_SCpnt, - void (*Current_done)(struct scsi_cmnd *)) + struct sbp2_lu *lu, + struct scsi_cmnd *Current_SCpnt, + void (*Current_done)(struct scsi_cmnd *)) { struct list_head *lh; - struct sbp2_command_info *command = NULL; + struct sbp2_command_info *cmd = NULL; unsigned long flags; - spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags); - if (!list_empty(&scsi_id->sbp2_command_orb_completed)) { - lh = scsi_id->sbp2_command_orb_completed.next; + spin_lock_irqsave(&lu->cmd_orb_lock, flags); + if (!list_empty(&lu->cmd_orb_completed)) { + lh = lu->cmd_orb_completed.next; list_del(lh); - command = list_entry(lh, struct sbp2_command_info, list); - command->Current_done = Current_done; - command->Current_SCpnt = Current_SCpnt; - list_add_tail(&command->list, &scsi_id->sbp2_command_orb_inuse); - } else { + cmd = list_entry(lh, struct sbp2_command_info, list); + cmd->Current_done = Current_done; + cmd->Current_SCpnt = Current_SCpnt; + list_add_tail(&cmd->list, &lu->cmd_orb_inuse); + } else SBP2_ERR("%s: no orbs available", __FUNCTION__); - } - spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); - return command; -} - -/* Free our DMA's */ -static void sbp2util_free_command_dma(struct sbp2_command_info *command) -{ - struct scsi_id_instance_data *scsi_id = - (struct scsi_id_instance_data *)command->Current_SCpnt->device->host->hostdata[0]; - struct hpsb_host *host; - - if (!scsi_id) { - SBP2_ERR("%s: scsi_id == NULL", __FUNCTION__); - return; - } - - host = scsi_id->ud->ne->host; - - if (command->cmd_dma) { - if (command->dma_type == CMD_DMA_SINGLE) { - pci_unmap_single(host->pdev, command->cmd_dma, - command->dma_size, command->dma_dir); - SBP2_DMA_FREE("single bulk"); - } else if (command->dma_type == CMD_DMA_PAGE) { - pci_unmap_page(host->pdev, command->cmd_dma, - command->dma_size, command->dma_dir); - SBP2_DMA_FREE("single page"); - } /* XXX: Check for CMD_DMA_NONE bug */ - command->dma_type = CMD_DMA_NONE; - command->cmd_dma = 0; - } - - if (command->sge_buffer) { - pci_unmap_sg(host->pdev, command->sge_buffer, - command->dma_size, command->dma_dir); - SBP2_DMA_FREE("scatter list"); - command->sge_buffer = NULL; - } + spin_unlock_irqrestore(&lu->cmd_orb_lock, flags); + return cmd; } /* - * This function moves a command to the completed orb list. - * Must be called with scsi_id->sbp2_command_orb_lock held. + * Unmaps the DMAs of a command and moves the command to the completed ORB list. + * Must be called with lu->cmd_orb_lock held. */ -static void sbp2util_mark_command_completed( - struct scsi_id_instance_data *scsi_id, - struct sbp2_command_info *command) +static void sbp2util_mark_command_completed(struct sbp2_lu *lu, + struct sbp2_command_info *cmd) { - list_del(&command->list); - sbp2util_free_command_dma(command); - list_add_tail(&command->list, &scsi_id->sbp2_command_orb_completed); + struct hpsb_host *host = lu->ud->ne->host; + + if (cmd->cmd_dma) { + if (cmd->dma_type == CMD_DMA_SINGLE) + dma_unmap_single(host->device.parent, cmd->cmd_dma, + cmd->dma_size, cmd->dma_dir); + else if (cmd->dma_type == CMD_DMA_PAGE) + dma_unmap_page(host->device.parent, cmd->cmd_dma, + cmd->dma_size, cmd->dma_dir); + /* XXX: Check for CMD_DMA_NONE bug */ + cmd->dma_type = CMD_DMA_NONE; + cmd->cmd_dma = 0; + } + if (cmd->sge_buffer) { + dma_unmap_sg(host->device.parent, cmd->sge_buffer, + cmd->dma_size, cmd->dma_dir); + cmd->sge_buffer = NULL; + } + list_move_tail(&cmd->list, &lu->cmd_orb_completed); } /* - * Is scsi_id valid? Is the 1394 node still present? + * Is lu valid? Is the 1394 node still present? */ -static inline int sbp2util_node_is_available(struct scsi_id_instance_data *scsi_id) +static inline int sbp2util_node_is_available(struct sbp2_lu *lu) { - return scsi_id && scsi_id->ne && !scsi_id->ne->in_limbo; + return lu && lu->ne && !lu->ne->in_limbo; } /********************************************* * IEEE-1394 core driver stack related section *********************************************/ -static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud); static int sbp2_probe(struct device *dev) { struct unit_directory *ud; - struct scsi_id_instance_data *scsi_id; - - SBP2_DEBUG_ENTER(); + struct sbp2_lu *lu; ud = container_of(dev, struct unit_directory, device); @@ -726,67 +643,58 @@ static int sbp2_probe(struct device *dev) if (ud->flags & UNIT_DIRECTORY_HAS_LUN_DIRECTORY) return -ENODEV; - scsi_id = sbp2_alloc_device(ud); - - if (!scsi_id) + lu = sbp2_alloc_device(ud); + if (!lu) return -ENOMEM; - sbp2_parse_unit_directory(scsi_id, ud); - - return sbp2_start_device(scsi_id); + sbp2_parse_unit_directory(lu, ud); + return sbp2_start_device(lu); } static int sbp2_remove(struct device *dev) { struct unit_directory *ud; - struct scsi_id_instance_data *scsi_id; + struct sbp2_lu *lu; struct scsi_device *sdev; - SBP2_DEBUG_ENTER(); - ud = container_of(dev, struct unit_directory, device); - scsi_id = ud->device.driver_data; - if (!scsi_id) + lu = ud->device.driver_data; + if (!lu) return 0; - if (scsi_id->scsi_host) { + if (lu->shost) { /* Get rid of enqueued commands if there is no chance to * send them. */ - if (!sbp2util_node_is_available(scsi_id)) - sbp2scsi_complete_all_commands(scsi_id, DID_NO_CONNECT); - /* scsi_remove_device() will trigger shutdown functions of SCSI + if (!sbp2util_node_is_available(lu)) + sbp2scsi_complete_all_commands(lu, DID_NO_CONNECT); + /* scsi_remove_device() may trigger shutdown functions of SCSI * highlevel drivers which would deadlock if blocked. */ - atomic_set(&scsi_id->state, SBP2LU_STATE_IN_SHUTDOWN); - scsi_unblock_requests(scsi_id->scsi_host); + atomic_set(&lu->state, SBP2LU_STATE_IN_SHUTDOWN); + scsi_unblock_requests(lu->shost); } - sdev = scsi_id->sdev; + sdev = lu->sdev; if (sdev) { - scsi_id->sdev = NULL; + lu->sdev = NULL; scsi_remove_device(sdev); } - sbp2_logout_device(scsi_id); - sbp2_remove_device(scsi_id); + sbp2_logout_device(lu); + sbp2_remove_device(lu); return 0; } static int sbp2_update(struct unit_directory *ud) { - struct scsi_id_instance_data *scsi_id = ud->device.driver_data; - - SBP2_DEBUG_ENTER(); + struct sbp2_lu *lu = ud->device.driver_data; - if (sbp2_reconnect_device(scsi_id)) { + if (sbp2_reconnect_device(lu)) { + /* Reconnect has failed. Perhaps we didn't reconnect fast + * enough. Try a regular login, but first log out just in + * case of any weirdness. */ + sbp2_logout_device(lu); - /* - * Ok, reconnect has failed. Perhaps we didn't - * reconnect fast enough. Try doing a regular login, but - * first do a logout just in case of any weirdness. - */ - sbp2_logout_device(scsi_id); - - if (sbp2_login_device(scsi_id)) { + if (sbp2_login_device(lu)) { /* Login failed too, just fail, and the backend * will call our sbp2_remove for us */ SBP2_ERR("Failed to reconnect to sbp2 device!"); @@ -794,69 +702,59 @@ static int sbp2_update(struct unit_directory *ud) } } - /* Set max retries to something large on the device. */ - sbp2_set_busy_timeout(scsi_id); + sbp2_set_busy_timeout(lu); + sbp2_agent_reset(lu, 1); + sbp2_max_speed_and_size(lu); - /* Do a SBP-2 fetch agent reset. */ - sbp2_agent_reset(scsi_id, 1); - - /* Get the max speed and packet size that we can use. */ - sbp2_max_speed_and_size(scsi_id); - - /* Complete any pending commands with busy (so they get - * retried) and remove them from our queue - */ - sbp2scsi_complete_all_commands(scsi_id, DID_BUS_BUSY); + /* Complete any pending commands with busy (so they get retried) + * and remove them from our queue. */ + sbp2scsi_complete_all_commands(lu, DID_BUS_BUSY); /* Accept new commands unless there was another bus reset in the * meantime. */ - if (hpsb_node_entry_valid(scsi_id->ne)) { - atomic_set(&scsi_id->state, SBP2LU_STATE_RUNNING); - scsi_unblock_requests(scsi_id->scsi_host); + if (hpsb_node_entry_valid(lu->ne)) { + atomic_set(&lu->state, SBP2LU_STATE_RUNNING); + scsi_unblock_requests(lu->shost); } return 0; } -/* This functions is called by the sbp2_probe, for each new device. We now - * allocate one scsi host for each scsi_id (unit directory). */ -static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud) +static struct sbp2_lu *sbp2_alloc_device(struct unit_directory *ud) { - struct sbp2scsi_host_info *hi; - struct Scsi_Host *scsi_host = NULL; - struct scsi_id_instance_data *scsi_id = NULL; + struct sbp2_fwhost_info *hi; + struct Scsi_Host *shost = NULL; + struct sbp2_lu *lu = NULL; - SBP2_DEBUG_ENTER(); - - scsi_id = kzalloc(sizeof(*scsi_id), GFP_KERNEL); - if (!scsi_id) { - SBP2_ERR("failed to create scsi_id"); + lu = kzalloc(sizeof(*lu), GFP_KERNEL); + if (!lu) { + SBP2_ERR("failed to create lu"); goto failed_alloc; } - scsi_id->ne = ud->ne; - scsi_id->ud = ud; - scsi_id->speed_code = IEEE1394_SPEED_100; - scsi_id->max_payload_size = sbp2_speedto_max_payload[IEEE1394_SPEED_100]; - scsi_id->status_fifo_addr = CSR1212_INVALID_ADDR_SPACE; - INIT_LIST_HEAD(&scsi_id->sbp2_command_orb_inuse); - INIT_LIST_HEAD(&scsi_id->sbp2_command_orb_completed); - INIT_LIST_HEAD(&scsi_id->scsi_list); - spin_lock_init(&scsi_id->sbp2_command_orb_lock); - atomic_set(&scsi_id->state, SBP2LU_STATE_RUNNING); - INIT_WORK(&scsi_id->protocol_work, NULL, NULL); + lu->ne = ud->ne; + lu->ud = ud; + lu->speed_code = IEEE1394_SPEED_100; + lu->max_payload_size = sbp2_speedto_max_payload[IEEE1394_SPEED_100]; + lu->status_fifo_addr = CSR1212_INVALID_ADDR_SPACE; + INIT_LIST_HEAD(&lu->cmd_orb_inuse); + INIT_LIST_HEAD(&lu->cmd_orb_completed); + INIT_LIST_HEAD(&lu->lu_list); + spin_lock_init(&lu->cmd_orb_lock); + atomic_set(&lu->state, SBP2LU_STATE_RUNNING); + INIT_WORK(&lu->protocol_work, NULL); - ud->device.driver_data = scsi_id; + ud->device.driver_data = lu; hi = hpsb_get_hostinfo(&sbp2_highlevel, ud->ne->host); if (!hi) { - hi = hpsb_create_hostinfo(&sbp2_highlevel, ud->ne->host, sizeof(*hi)); + hi = hpsb_create_hostinfo(&sbp2_highlevel, ud->ne->host, + sizeof(*hi)); if (!hi) { SBP2_ERR("failed to allocate hostinfo"); goto failed_alloc; } - SBP2_DEBUG("sbp2_alloc_device: allocated hostinfo"); hi->host = ud->ne->host; - INIT_LIST_HEAD(&hi->scsi_ids); + INIT_LIST_HEAD(&hi->logical_units); #ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA /* Handle data movement if physical dma is not @@ -876,9 +774,9 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud goto failed_alloc; } - scsi_id->hi = hi; + lu->hi = hi; - list_add_tail(&scsi_id->scsi_list, &hi->scsi_ids); + list_add_tail(&lu->lu_list, &hi->logical_units); /* Register the status FIFO address range. We could use the same FIFO * for targets at different nodes. However we need different FIFOs per @@ -888,302 +786,214 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud * then be performed as unified transactions. This slightly reduces * bandwidth usage, and some Prolific based devices seem to require it. */ - scsi_id->status_fifo_addr = hpsb_allocate_and_register_addrspace( + lu->status_fifo_addr = hpsb_allocate_and_register_addrspace( &sbp2_highlevel, ud->ne->host, &sbp2_ops, sizeof(struct sbp2_status_block), sizeof(quadlet_t), ud->ne->host->low_addr_space, CSR1212_ALL_SPACE_END); - if (scsi_id->status_fifo_addr == CSR1212_INVALID_ADDR_SPACE) { + if (lu->status_fifo_addr == CSR1212_INVALID_ADDR_SPACE) { SBP2_ERR("failed to allocate status FIFO address range"); goto failed_alloc; } - /* Register our host with the SCSI stack. */ - scsi_host = scsi_host_alloc(&scsi_driver_template, - sizeof(unsigned long)); - if (!scsi_host) { + shost = scsi_host_alloc(&sbp2_shost_template, sizeof(unsigned long)); + if (!shost) { SBP2_ERR("failed to register scsi host"); goto failed_alloc; } - scsi_host->hostdata[0] = (unsigned long)scsi_id; + shost->hostdata[0] = (unsigned long)lu; - if (!scsi_add_host(scsi_host, &ud->device)) { - scsi_id->scsi_host = scsi_host; - return scsi_id; + if (!scsi_add_host(shost, &ud->device)) { + lu->shost = shost; + return lu; } SBP2_ERR("failed to add scsi host"); - scsi_host_put(scsi_host); + scsi_host_put(shost); failed_alloc: - sbp2_remove_device(scsi_id); + sbp2_remove_device(lu); return NULL; } static void sbp2_host_reset(struct hpsb_host *host) { - struct sbp2scsi_host_info *hi; - struct scsi_id_instance_data *scsi_id; + struct sbp2_fwhost_info *hi; + struct sbp2_lu *lu; hi = hpsb_get_hostinfo(&sbp2_highlevel, host); if (!hi) return; - list_for_each_entry(scsi_id, &hi->scsi_ids, scsi_list) - if (likely(atomic_read(&scsi_id->state) != + list_for_each_entry(lu, &hi->logical_units, lu_list) + if (likely(atomic_read(&lu->state) != SBP2LU_STATE_IN_SHUTDOWN)) { - atomic_set(&scsi_id->state, SBP2LU_STATE_IN_RESET); - scsi_block_requests(scsi_id->scsi_host); + atomic_set(&lu->state, SBP2LU_STATE_IN_RESET); + scsi_block_requests(lu->shost); } } -/* - * This function is where we first pull the node unique ids, and then - * allocate memory and register a SBP-2 device. - */ -static int sbp2_start_device(struct scsi_id_instance_data *scsi_id) +static int sbp2_start_device(struct sbp2_lu *lu) { - struct sbp2scsi_host_info *hi = scsi_id->hi; + struct sbp2_fwhost_info *hi = lu->hi; int error; - SBP2_DEBUG_ENTER(); - - /* Login FIFO DMA */ - scsi_id->login_response = - pci_alloc_consistent(hi->host->pdev, + lu->login_response = dma_alloc_coherent(hi->host->device.parent, sizeof(struct sbp2_login_response), - &scsi_id->login_response_dma); - if (!scsi_id->login_response) + &lu->login_response_dma, GFP_KERNEL); + if (!lu->login_response) goto alloc_fail; - SBP2_DMA_ALLOC("consistent DMA region for login FIFO"); - /* Query logins ORB DMA */ - scsi_id->query_logins_orb = - pci_alloc_consistent(hi->host->pdev, + lu->query_logins_orb = dma_alloc_coherent(hi->host->device.parent, sizeof(struct sbp2_query_logins_orb), - &scsi_id->query_logins_orb_dma); - if (!scsi_id->query_logins_orb) + &lu->query_logins_orb_dma, GFP_KERNEL); + if (!lu->query_logins_orb) goto alloc_fail; - SBP2_DMA_ALLOC("consistent DMA region for query logins ORB"); - /* Query logins response DMA */ - scsi_id->query_logins_response = - pci_alloc_consistent(hi->host->pdev, + lu->query_logins_response = dma_alloc_coherent(hi->host->device.parent, sizeof(struct sbp2_query_logins_response), - &scsi_id->query_logins_response_dma); - if (!scsi_id->query_logins_response) + &lu->query_logins_response_dma, GFP_KERNEL); + if (!lu->query_logins_response) goto alloc_fail; - SBP2_DMA_ALLOC("consistent DMA region for query logins response"); - /* Reconnect ORB DMA */ - scsi_id->reconnect_orb = - pci_alloc_consistent(hi->host->pdev, + lu->reconnect_orb = dma_alloc_coherent(hi->host->device.parent, sizeof(struct sbp2_reconnect_orb), - &scsi_id->reconnect_orb_dma); - if (!scsi_id->reconnect_orb) + &lu->reconnect_orb_dma, GFP_KERNEL); + if (!lu->reconnect_orb) goto alloc_fail; - SBP2_DMA_ALLOC("consistent DMA region for reconnect ORB"); - /* Logout ORB DMA */ - scsi_id->logout_orb = - pci_alloc_consistent(hi->host->pdev, + lu->logout_orb = dma_alloc_coherent(hi->host->device.parent, sizeof(struct sbp2_logout_orb), - &scsi_id->logout_orb_dma); - if (!scsi_id->logout_orb) + &lu->logout_orb_dma, GFP_KERNEL); + if (!lu->logout_orb) goto alloc_fail; - SBP2_DMA_ALLOC("consistent DMA region for logout ORB"); - /* Login ORB DMA */ - scsi_id->login_orb = - pci_alloc_consistent(hi->host->pdev, + lu->login_orb = dma_alloc_coherent(hi->host->device.parent, sizeof(struct sbp2_login_orb), - &scsi_id->login_orb_dma); - if (!scsi_id->login_orb) + &lu->login_orb_dma, GFP_KERNEL); + if (!lu->login_orb) goto alloc_fail; - SBP2_DMA_ALLOC("consistent DMA region for login ORB"); - - SBP2_DEBUG("New SBP-2 device inserted, SCSI ID = %x", scsi_id->ud->id); - /* - * Create our command orb pool - */ - if (sbp2util_create_command_orb_pool(scsi_id)) { + if (sbp2util_create_command_orb_pool(lu)) { SBP2_ERR("sbp2util_create_command_orb_pool failed!"); - sbp2_remove_device(scsi_id); + sbp2_remove_device(lu); return -ENOMEM; } - /* Schedule a timeout here. The reason is that we may be so close - * to a bus reset, that the device is not available for logins. - * This can happen when the bus reset is caused by the host - * connected to the sbp2 device being removed. That host would - * have a certain amount of time to relogin before the sbp2 device - * allows someone else to login instead. One second makes sense. */ + /* Wait a second before trying to log in. Previously logged in + * initiators need a chance to reconnect. */ if (msleep_interruptible(1000)) { - sbp2_remove_device(scsi_id); + sbp2_remove_device(lu); return -EINTR; } - /* - * Login to the sbp-2 device - */ - if (sbp2_login_device(scsi_id)) { - /* Login failed, just remove the device. */ - sbp2_remove_device(scsi_id); + if (sbp2_login_device(lu)) { + sbp2_remove_device(lu); return -EBUSY; } - /* - * Set max retries to something large on the device - */ - sbp2_set_busy_timeout(scsi_id); - - /* - * Do a SBP-2 fetch agent reset - */ - sbp2_agent_reset(scsi_id, 1); - - /* - * Get the max speed and packet size that we can use - */ - sbp2_max_speed_and_size(scsi_id); + sbp2_set_busy_timeout(lu); + sbp2_agent_reset(lu, 1); + sbp2_max_speed_and_size(lu); - /* Add this device to the scsi layer now */ - error = scsi_add_device(scsi_id->scsi_host, 0, scsi_id->ud->id, 0); + error = scsi_add_device(lu->shost, 0, lu->ud->id, 0); if (error) { SBP2_ERR("scsi_add_device failed"); - sbp2_logout_device(scsi_id); - sbp2_remove_device(scsi_id); + sbp2_logout_device(lu); + sbp2_remove_device(lu); return error; } return 0; alloc_fail: - SBP2_ERR("Could not allocate memory for scsi_id"); - sbp2_remove_device(scsi_id); + SBP2_ERR("Could not allocate memory for lu"); + sbp2_remove_device(lu); return -ENOMEM; } -/* - * This function removes an sbp2 device from the sbp2scsi_host_info struct. - */ -static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id) +static void sbp2_remove_device(struct sbp2_lu *lu) { - struct sbp2scsi_host_info *hi; - - SBP2_DEBUG_ENTER(); + struct sbp2_fwhost_info *hi; - if (!scsi_id) + if (!lu) return; - hi = scsi_id->hi; + hi = lu->hi; - /* This will remove our scsi device aswell */ - if (scsi_id->scsi_host) { - scsi_remove_host(scsi_id->scsi_host); - scsi_host_put(scsi_id->scsi_host); + if (lu->shost) { + scsi_remove_host(lu->shost); + scsi_host_put(lu->shost); } flush_scheduled_work(); - sbp2util_remove_command_orb_pool(scsi_id); + sbp2util_remove_command_orb_pool(lu); - list_del(&scsi_id->scsi_list); + list_del(&lu->lu_list); - if (scsi_id->login_response) { - pci_free_consistent(hi->host->pdev, + if (lu->login_response) + dma_free_coherent(hi->host->device.parent, sizeof(struct sbp2_login_response), - scsi_id->login_response, - scsi_id->login_response_dma); - SBP2_DMA_FREE("single login FIFO"); - } - - if (scsi_id->login_orb) { - pci_free_consistent(hi->host->pdev, + lu->login_response, + lu->login_response_dma); + if (lu->login_orb) + dma_free_coherent(hi->host->device.parent, sizeof(struct sbp2_login_orb), - scsi_id->login_orb, - scsi_id->login_orb_dma); - SBP2_DMA_FREE("single login ORB"); - } - - if (scsi_id->reconnect_orb) { - pci_free_consistent(hi->host->pdev, + lu->login_orb, + lu->login_orb_dma); + if (lu->reconnect_orb) + dma_free_coherent(hi->host->device.parent, sizeof(struct sbp2_reconnect_orb), - scsi_id->reconnect_orb, - scsi_id->reconnect_orb_dma); - SBP2_DMA_FREE("single reconnect orb"); - } - - if (scsi_id->logout_orb) { - pci_free_consistent(hi->host->pdev, + lu->reconnect_orb, + lu->reconnect_orb_dma); + if (lu->logout_orb) + dma_free_coherent(hi->host->device.parent, sizeof(struct sbp2_logout_orb), - scsi_id->logout_orb, - scsi_id->logout_orb_dma); - SBP2_DMA_FREE("single logout orb"); - } - - if (scsi_id->query_logins_orb) { - pci_free_consistent(hi->host->pdev, + lu->logout_orb, + lu->logout_orb_dma); + if (lu->query_logins_orb) + dma_free_coherent(hi->host->device.parent, sizeof(struct sbp2_query_logins_orb), - scsi_id->query_logins_orb, - scsi_id->query_logins_orb_dma); - SBP2_DMA_FREE("single query logins orb"); - } - - if (scsi_id->query_logins_response) { - pci_free_consistent(hi->host->pdev, + lu->query_logins_orb, + lu->query_logins_orb_dma); + if (lu->query_logins_response) + dma_free_coherent(hi->host->device.parent, sizeof(struct sbp2_query_logins_response), - scsi_id->query_logins_response, - scsi_id->query_logins_response_dma); - SBP2_DMA_FREE("single query logins data"); - } + lu->query_logins_response, + lu->query_logins_response_dma); - if (scsi_id->status_fifo_addr != CSR1212_INVALID_ADDR_SPACE) + if (lu->status_fifo_addr != CSR1212_INVALID_ADDR_SPACE) hpsb_unregister_addrspace(&sbp2_highlevel, hi->host, - scsi_id->status_fifo_addr); + lu->status_fifo_addr); - scsi_id->ud->device.driver_data = NULL; + lu->ud->device.driver_data = NULL; if (hi) module_put(hi->host->driver->owner); - SBP2_DEBUG("SBP-2 device removed, SCSI ID = %d", scsi_id->ud->id); - - kfree(scsi_id); + kfree(lu); } #ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA /* - * This function deals with physical dma write requests (for adapters that do not support - * physical dma in hardware). Mostly just here for debugging... + * Deal with write requests on adapters which do not support physical DMA or + * have it switched off. */ static int sbp2_handle_physdma_write(struct hpsb_host *host, int nodeid, int destid, quadlet_t *data, u64 addr, size_t length, u16 flags) { - - /* - * Manually put the data in the right place. - */ memcpy(bus_to_virt((u32) addr), data, length); - sbp2util_packet_dump(data, length, "sbp2 phys dma write by device", - (u32) addr); return RCODE_COMPLETE; } /* - * This function deals with physical dma read requests (for adapters that do not support - * physical dma in hardware). Mostly just here for debugging... + * Deal with read requests on adapters which do not support physical DMA or + * have it switched off. */ static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid, quadlet_t *data, u64 addr, size_t length, u16 flags) { - - /* - * Grab data from memory and send a read response. - */ memcpy(data, bus_to_virt((u32) addr), length); - sbp2util_packet_dump(data, length, "sbp2 phys dma read by device", - (u32) addr); return RCODE_COMPLETE; } #endif @@ -1192,74 +1002,69 @@ static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid, * SBP-2 protocol related section **************************************/ -/* - * This function queries the device for the maximum concurrent logins it - * supports. - */ -static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id) +static int sbp2_query_logins(struct sbp2_lu *lu) { - struct sbp2scsi_host_info *hi = scsi_id->hi; + struct sbp2_fwhost_info *hi = lu->hi; quadlet_t data[2]; int max_logins; int active_logins; - SBP2_DEBUG_ENTER(); - - scsi_id->query_logins_orb->reserved1 = 0x0; - scsi_id->query_logins_orb->reserved2 = 0x0; - - scsi_id->query_logins_orb->query_response_lo = scsi_id->query_logins_response_dma; - scsi_id->query_logins_orb->query_response_hi = ORB_SET_NODE_ID(hi->host->node_id); - - scsi_id->query_logins_orb->lun_misc = ORB_SET_FUNCTION(SBP2_QUERY_LOGINS_REQUEST); - scsi_id->query_logins_orb->lun_misc |= ORB_SET_NOTIFY(1); - scsi_id->query_logins_orb->lun_misc |= ORB_SET_LUN(scsi_id->sbp2_lun); + lu->query_logins_orb->reserved1 = 0x0; + lu->query_logins_orb->reserved2 = 0x0; - scsi_id->query_logins_orb->reserved_resp_length = - ORB_SET_QUERY_LOGINS_RESP_LENGTH(sizeof(struct sbp2_query_logins_response)); + lu->query_logins_orb->query_response_lo = lu->query_logins_response_dma; + lu->query_logins_orb->query_response_hi = + ORB_SET_NODE_ID(hi->host->node_id); + lu->query_logins_orb->lun_misc = + ORB_SET_FUNCTION(SBP2_QUERY_LOGINS_REQUEST); + lu->query_logins_orb->lun_misc |= ORB_SET_NOTIFY(1); + lu->query_logins_orb->lun_misc |= ORB_SET_LUN(lu->lun); - scsi_id->query_logins_orb->status_fifo_hi = - ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id); - scsi_id->query_logins_orb->status_fifo_lo = - ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr); + lu->query_logins_orb->reserved_resp_length = + ORB_SET_QUERY_LOGINS_RESP_LENGTH( + sizeof(struct sbp2_query_logins_response)); - sbp2util_cpu_to_be32_buffer(scsi_id->query_logins_orb, sizeof(struct sbp2_query_logins_orb)); + lu->query_logins_orb->status_fifo_hi = + ORB_SET_STATUS_FIFO_HI(lu->status_fifo_addr, hi->host->node_id); + lu->query_logins_orb->status_fifo_lo = + ORB_SET_STATUS_FIFO_LO(lu->status_fifo_addr); - sbp2util_packet_dump(scsi_id->query_logins_orb, sizeof(struct sbp2_query_logins_orb), - "sbp2 query logins orb", scsi_id->query_logins_orb_dma); + sbp2util_cpu_to_be32_buffer(lu->query_logins_orb, + sizeof(struct sbp2_query_logins_orb)); - memset(scsi_id->query_logins_response, 0, sizeof(struct sbp2_query_logins_response)); + memset(lu->query_logins_response, 0, + sizeof(struct sbp2_query_logins_response)); data[0] = ORB_SET_NODE_ID(hi->host->node_id); - data[1] = scsi_id->query_logins_orb_dma; + data[1] = lu->query_logins_orb_dma; sbp2util_cpu_to_be32_buffer(data, 8); - hpsb_node_write(scsi_id->ne, scsi_id->sbp2_management_agent_addr, data, 8); + hpsb_node_write(lu->ne, lu->management_agent_addr, data, 8); - if (sbp2util_access_timeout(scsi_id, 2*HZ)) { + if (sbp2util_access_timeout(lu, 2*HZ)) { SBP2_INFO("Error querying logins to SBP-2 device - timed out"); return -EIO; } - if (scsi_id->status_block.ORB_offset_lo != scsi_id->query_logins_orb_dma) { + if (lu->status_block.ORB_offset_lo != lu->query_logins_orb_dma) { SBP2_INFO("Error querying logins to SBP-2 device - timed out"); return -EIO; } - if (STATUS_TEST_RDS(scsi_id->status_block.ORB_offset_hi_misc)) { + if (STATUS_TEST_RDS(lu->status_block.ORB_offset_hi_misc)) { SBP2_INFO("Error querying logins to SBP-2 device - failed"); return -EIO; } - sbp2util_cpu_to_be32_buffer(scsi_id->query_logins_response, sizeof(struct sbp2_query_logins_response)); + sbp2util_cpu_to_be32_buffer(lu->query_logins_response, + sizeof(struct sbp2_query_logins_response)); - SBP2_DEBUG("length_max_logins = %x", - (unsigned int)scsi_id->query_logins_response->length_max_logins); - - max_logins = RESPONSE_GET_MAX_LOGINS(scsi_id->query_logins_response->length_max_logins); + max_logins = RESPONSE_GET_MAX_LOGINS( + lu->query_logins_response->length_max_logins); SBP2_INFO("Maximum concurrent logins supported: %d", max_logins); - active_logins = RESPONSE_GET_ACTIVE_LOGINS(scsi_id->query_logins_response->length_max_logins); + active_logins = RESPONSE_GET_ACTIVE_LOGINS( + lu->query_logins_response->length_max_logins); SBP2_INFO("Number of active logins: %d", active_logins); if (active_logins >= max_logins) { @@ -1269,332 +1074,231 @@ static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id) return 0; } -/* - * This function is called in order to login to a particular SBP-2 device, - * after a bus reset. - */ -static int sbp2_login_device(struct scsi_id_instance_data *scsi_id) +static int sbp2_login_device(struct sbp2_lu *lu) { - struct sbp2scsi_host_info *hi = scsi_id->hi; + struct sbp2_fwhost_info *hi = lu->hi; quadlet_t data[2]; - SBP2_DEBUG_ENTER(); - - if (!scsi_id->login_orb) { - SBP2_DEBUG("%s: login_orb not alloc'd!", __FUNCTION__); + if (!lu->login_orb) return -EIO; - } - if (!exclusive_login) { - if (sbp2_query_logins(scsi_id)) { - SBP2_INFO("Device does not support any more concurrent logins"); - return -EIO; - } + if (!sbp2_exclusive_login && sbp2_query_logins(lu)) { + SBP2_INFO("Device does not support any more concurrent logins"); + return -EIO; } - /* Set-up login ORB, assume no password */ - scsi_id->login_orb->password_hi = 0; - scsi_id->login_orb->password_lo = 0; + /* assume no password */ + lu->login_orb->password_hi = 0; + lu->login_orb->password_lo = 0; - scsi_id->login_orb->login_response_lo = scsi_id->login_response_dma; - scsi_id->login_orb->login_response_hi = ORB_SET_NODE_ID(hi->host->node_id); + lu->login_orb->login_response_lo = lu->login_response_dma; + lu->login_orb->login_response_hi = ORB_SET_NODE_ID(hi->host->node_id); + lu->login_orb->lun_misc = ORB_SET_FUNCTION(SBP2_LOGIN_REQUEST); - scsi_id->login_orb->lun_misc = ORB_SET_FUNCTION(SBP2_LOGIN_REQUEST); - scsi_id->login_orb->lun_misc |= ORB_SET_RECONNECT(0); /* One second reconnect time */ - scsi_id->login_orb->lun_misc |= ORB_SET_EXCLUSIVE(exclusive_login); /* Exclusive access to device */ - scsi_id->login_orb->lun_misc |= ORB_SET_NOTIFY(1); /* Notify us of login complete */ - scsi_id->login_orb->lun_misc |= ORB_SET_LUN(scsi_id->sbp2_lun); + /* one second reconnect time */ + lu->login_orb->lun_misc |= ORB_SET_RECONNECT(0); + lu->login_orb->lun_misc |= ORB_SET_EXCLUSIVE(sbp2_exclusive_login); + lu->login_orb->lun_misc |= ORB_SET_NOTIFY(1); + lu->login_orb->lun_misc |= ORB_SET_LUN(lu->lun); - scsi_id->login_orb->passwd_resp_lengths = + lu->login_orb->passwd_resp_lengths = ORB_SET_LOGIN_RESP_LENGTH(sizeof(struct sbp2_login_response)); - scsi_id->login_orb->status_fifo_hi = - ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id); - scsi_id->login_orb->status_fifo_lo = - ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr); - - sbp2util_cpu_to_be32_buffer(scsi_id->login_orb, sizeof(struct sbp2_login_orb)); + lu->login_orb->status_fifo_hi = + ORB_SET_STATUS_FIFO_HI(lu->status_fifo_addr, hi->host->node_id); + lu->login_orb->status_fifo_lo = + ORB_SET_STATUS_FIFO_LO(lu->status_fifo_addr); - sbp2util_packet_dump(scsi_id->login_orb, sizeof(struct sbp2_login_orb), - "sbp2 login orb", scsi_id->login_orb_dma); + sbp2util_cpu_to_be32_buffer(lu->login_orb, + sizeof(struct sbp2_login_orb)); - memset(scsi_id->login_response, 0, sizeof(struct sbp2_login_response)); + memset(lu->login_response, 0, sizeof(struct sbp2_login_response)); data[0] = ORB_SET_NODE_ID(hi->host->node_id); - data[1] = scsi_id->login_orb_dma; + data[1] = lu->login_orb_dma; sbp2util_cpu_to_be32_buffer(data, 8); - hpsb_node_write(scsi_id->ne, scsi_id->sbp2_management_agent_addr, data, 8); + hpsb_node_write(lu->ne, lu->management_agent_addr, data, 8); - /* - * Wait for login status (up to 20 seconds)... - */ - if (sbp2util_access_timeout(scsi_id, 20*HZ)) { + /* wait up to 20 seconds for login status */ + if (sbp2util_access_timeout(lu, 20*HZ)) { SBP2_ERR("Error logging into SBP-2 device - timed out"); return -EIO; } - /* - * Sanity. Make sure status returned matches login orb. - */ - if (scsi_id->status_block.ORB_offset_lo != scsi_id->login_orb_dma) { + /* make sure that the returned status matches the login ORB */ + if (lu->status_block.ORB_offset_lo != lu->login_orb_dma) { SBP2_ERR("Error logging into SBP-2 device - timed out"); return -EIO; } - if (STATUS_TEST_RDS(scsi_id->status_block.ORB_offset_hi_misc)) { + if (STATUS_TEST_RDS(lu->status_block.ORB_offset_hi_misc)) { SBP2_ERR("Error logging into SBP-2 device - failed"); return -EIO; } - /* - * Byte swap the login response, for use when reconnecting or - * logging out. - */ - sbp2util_cpu_to_be32_buffer(scsi_id->login_response, sizeof(struct sbp2_login_response)); - - /* - * Grab our command block agent address from the login response. - */ - SBP2_DEBUG("command_block_agent_hi = %x", - (unsigned int)scsi_id->login_response->command_block_agent_hi); - SBP2_DEBUG("command_block_agent_lo = %x", - (unsigned int)scsi_id->login_response->command_block_agent_lo); - - scsi_id->sbp2_command_block_agent_addr = - ((u64)scsi_id->login_response->command_block_agent_hi) << 32; - scsi_id->sbp2_command_block_agent_addr |= ((u64)scsi_id->login_response->command_block_agent_lo); - scsi_id->sbp2_command_block_agent_addr &= 0x0000ffffffffffffULL; + sbp2util_cpu_to_be32_buffer(lu->login_response, + sizeof(struct sbp2_login_response)); + lu->command_block_agent_addr = + ((u64)lu->login_response->command_block_agent_hi) << 32; + lu->command_block_agent_addr |= + ((u64)lu->login_response->command_block_agent_lo); + lu->command_block_agent_addr &= 0x0000ffffffffffffULL; SBP2_INFO("Logged into SBP-2 device"); return 0; } -/* - * This function is called in order to logout from a particular SBP-2 - * device, usually called during driver unload. - */ -static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id) +static int sbp2_logout_device(struct sbp2_lu *lu) { - struct sbp2scsi_host_info *hi = scsi_id->hi; + struct sbp2_fwhost_info *hi = lu->hi; quadlet_t data[2]; int error; - SBP2_DEBUG_ENTER(); + lu->logout_orb->reserved1 = 0x0; + lu->logout_orb->reserved2 = 0x0; + lu->logout_orb->reserved3 = 0x0; + lu->logout_orb->reserved4 = 0x0; - /* - * Set-up logout ORB - */ - scsi_id->logout_orb->reserved1 = 0x0; - scsi_id->logout_orb->reserved2 = 0x0; - scsi_id->logout_orb->reserved3 = 0x0; - scsi_id->logout_orb->reserved4 = 0x0; - - scsi_id->logout_orb->login_ID_misc = ORB_SET_FUNCTION(SBP2_LOGOUT_REQUEST); - scsi_id->logout_orb->login_ID_misc |= ORB_SET_LOGIN_ID(scsi_id->login_response->length_login_ID); - - /* Notify us when complete */ - scsi_id->logout_orb->login_ID_misc |= ORB_SET_NOTIFY(1); + lu->logout_orb->login_ID_misc = ORB_SET_FUNCTION(SBP2_LOGOUT_REQUEST); + lu->logout_orb->login_ID_misc |= + ORB_SET_LOGIN_ID(lu->login_response->length_login_ID); + lu->logout_orb->login_ID_misc |= ORB_SET_NOTIFY(1); - scsi_id->logout_orb->reserved5 = 0x0; - scsi_id->logout_orb->status_fifo_hi = - ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id); - scsi_id->logout_orb->status_fifo_lo = - ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr); - - /* - * Byte swap ORB if necessary - */ - sbp2util_cpu_to_be32_buffer(scsi_id->logout_orb, sizeof(struct sbp2_logout_orb)); + lu->logout_orb->reserved5 = 0x0; + lu->logout_orb->status_fifo_hi = + ORB_SET_STATUS_FIFO_HI(lu->status_fifo_addr, hi->host->node_id); + lu->logout_orb->status_fifo_lo = + ORB_SET_STATUS_FIFO_LO(lu->status_fifo_addr); - sbp2util_packet_dump(scsi_id->logout_orb, sizeof(struct sbp2_logout_orb), - "sbp2 logout orb", scsi_id->logout_orb_dma); + sbp2util_cpu_to_be32_buffer(lu->logout_orb, + sizeof(struct sbp2_logout_orb)); - /* - * Ok, let's write to the target's management agent register - */ data[0] = ORB_SET_NODE_ID(hi->host->node_id); - data[1] = scsi_id->logout_orb_dma; + data[1] = lu->logout_orb_dma; sbp2util_cpu_to_be32_buffer(data, 8); - error = hpsb_node_write(scsi_id->ne, - scsi_id->sbp2_management_agent_addr, data, 8); + error = hpsb_node_write(lu->ne, lu->management_agent_addr, data, 8); if (error) return error; - /* Wait for device to logout...1 second. */ - if (sbp2util_access_timeout(scsi_id, HZ)) + /* wait up to 1 second for the device to complete logout */ + if (sbp2util_access_timeout(lu, HZ)) return -EIO; SBP2_INFO("Logged out of SBP-2 device"); return 0; } -/* - * This function is called in order to reconnect to a particular SBP-2 - * device, after a bus reset. - */ -static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id) +static int sbp2_reconnect_device(struct sbp2_lu *lu) { - struct sbp2scsi_host_info *hi = scsi_id->hi; + struct sbp2_fwhost_info *hi = lu->hi; quadlet_t data[2]; int error; - SBP2_DEBUG_ENTER(); + lu->reconnect_orb->reserved1 = 0x0; + lu->reconnect_orb->reserved2 = 0x0; + lu->reconnect_orb->reserved3 = 0x0; + lu->reconnect_orb->reserved4 = 0x0; - /* - * Set-up reconnect ORB - */ - scsi_id->reconnect_orb->reserved1 = 0x0; - scsi_id->reconnect_orb->reserved2 = 0x0; - scsi_id->reconnect_orb->reserved3 = 0x0; - scsi_id->reconnect_orb->reserved4 = 0x0; - - scsi_id->reconnect_orb->login_ID_misc = ORB_SET_FUNCTION(SBP2_RECONNECT_REQUEST); - scsi_id->reconnect_orb->login_ID_misc |= - ORB_SET_LOGIN_ID(scsi_id->login_response->length_login_ID); - - /* Notify us when complete */ - scsi_id->reconnect_orb->login_ID_misc |= ORB_SET_NOTIFY(1); + lu->reconnect_orb->login_ID_misc = + ORB_SET_FUNCTION(SBP2_RECONNECT_REQUEST); + lu->reconnect_orb->login_ID_misc |= + ORB_SET_LOGIN_ID(lu->login_response->length_login_ID); + lu->reconnect_orb->login_ID_misc |= ORB_SET_NOTIFY(1); - scsi_id->reconnect_orb->reserved5 = 0x0; - scsi_id->reconnect_orb->status_fifo_hi = - ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id); - scsi_id->reconnect_orb->status_fifo_lo = - ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr); + lu->reconnect_orb->reserved5 = 0x0; + lu->reconnect_orb->status_fifo_hi = + ORB_SET_STATUS_FIFO_HI(lu->status_fifo_addr, hi->host->node_id); + lu->reconnect_orb->status_fifo_lo = + ORB_SET_STATUS_FIFO_LO(lu->status_fifo_addr); - /* - * Byte swap ORB if necessary - */ - sbp2util_cpu_to_be32_buffer(scsi_id->reconnect_orb, sizeof(struct sbp2_reconnect_orb)); - - sbp2util_packet_dump(scsi_id->reconnect_orb, sizeof(struct sbp2_reconnect_orb), - "sbp2 reconnect orb", scsi_id->reconnect_orb_dma); + sbp2util_cpu_to_be32_buffer(lu->reconnect_orb, + sizeof(struct sbp2_reconnect_orb)); data[0] = ORB_SET_NODE_ID(hi->host->node_id); - data[1] = scsi_id->reconnect_orb_dma; + data[1] = lu->reconnect_orb_dma; sbp2util_cpu_to_be32_buffer(data, 8); - error = hpsb_node_write(scsi_id->ne, - scsi_id->sbp2_management_agent_addr, data, 8); + error = hpsb_node_write(lu->ne, lu->management_agent_addr, data, 8); if (error) return error; - /* - * Wait for reconnect status (up to 1 second)... - */ - if (sbp2util_access_timeout(scsi_id, HZ)) { + /* wait up to 1 second for reconnect status */ + if (sbp2util_access_timeout(lu, HZ)) { SBP2_ERR("Error reconnecting to SBP-2 device - timed out"); return -EIO; } - /* - * Sanity. Make sure status returned matches reconnect orb. - */ - if (scsi_id->status_block.ORB_offset_lo != scsi_id->reconnect_orb_dma) { + /* make sure that the returned status matches the reconnect ORB */ + if (lu->status_block.ORB_offset_lo != lu->reconnect_orb_dma) { SBP2_ERR("Error reconnecting to SBP-2 device - timed out"); return -EIO; } - if (STATUS_TEST_RDS(scsi_id->status_block.ORB_offset_hi_misc)) { + if (STATUS_TEST_RDS(lu->status_block.ORB_offset_hi_misc)) { SBP2_ERR("Error reconnecting to SBP-2 device - failed"); return -EIO; } - HPSB_DEBUG("Reconnected to SBP-2 device"); + SBP2_INFO("Reconnected to SBP-2 device"); return 0; } /* - * This function is called in order to set the busy timeout (number of - * retries to attempt) on the sbp2 device. + * Set the target node's Single Phase Retry limit. Affects the target's retry + * behaviour if our node is too busy to accept requests. */ -static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id) +static int sbp2_set_busy_timeout(struct sbp2_lu *lu) { quadlet_t data; - SBP2_DEBUG_ENTER(); - data = cpu_to_be32(SBP2_BUSY_TIMEOUT_VALUE); - if (hpsb_node_write(scsi_id->ne, SBP2_BUSY_TIMEOUT_ADDRESS, &data, 4)) + if (hpsb_node_write(lu->ne, SBP2_BUSY_TIMEOUT_ADDRESS, &data, 4)) SBP2_ERR("%s error", __FUNCTION__); return 0; } -/* - * This function is called to parse sbp2 device's config rom unit - * directory. Used to determine things like sbp2 management agent offset, - * and command set used (SCSI or RBC). - */ -static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, +static void sbp2_parse_unit_directory(struct sbp2_lu *lu, struct unit_directory *ud) { struct csr1212_keyval *kv; struct csr1212_dentry *dentry; u64 management_agent_addr; - u32 command_set_spec_id, command_set, unit_characteristics, - firmware_revision; + u32 unit_characteristics, firmware_revision; unsigned workarounds; int i; - SBP2_DEBUG_ENTER(); - - management_agent_addr = 0x0; - command_set_spec_id = 0x0; - command_set = 0x0; - unit_characteristics = 0x0; - firmware_revision = 0x0; + management_agent_addr = 0; + unit_characteristics = 0; + firmware_revision = 0; - /* Handle different fields in the unit directory, based on keys */ csr1212_for_each_dir_entry(ud->ne->csr, kv, ud->ud_kv, dentry) { switch (kv->key.id) { case CSR1212_KV_ID_DEPENDENT_INFO: - if (kv->key.type == CSR1212_KV_TYPE_CSR_OFFSET) { - /* Save off the management agent address */ + if (kv->key.type == CSR1212_KV_TYPE_CSR_OFFSET) management_agent_addr = CSR1212_REGISTER_SPACE_BASE + (kv->value.csr_offset << 2); - SBP2_DEBUG("sbp2_management_agent_addr = %x", - (unsigned int)management_agent_addr); - } else if (kv->key.type == CSR1212_KV_TYPE_IMMEDIATE) { - scsi_id->sbp2_lun = - ORB_SET_LUN(kv->value.immediate); - } - break; - - case SBP2_COMMAND_SET_SPEC_ID_KEY: - /* Command spec organization */ - command_set_spec_id = kv->value.immediate; - SBP2_DEBUG("sbp2_command_set_spec_id = %x", - (unsigned int)command_set_spec_id); - break; - - case SBP2_COMMAND_SET_KEY: - /* Command set used by sbp2 device */ - command_set = kv->value.immediate; - SBP2_DEBUG("sbp2_command_set = %x", - (unsigned int)command_set); + else if (kv->key.type == CSR1212_KV_TYPE_IMMEDIATE) + lu->lun = ORB_SET_LUN(kv->value.immediate); break; case SBP2_UNIT_CHARACTERISTICS_KEY: - /* - * Unit characterisitcs (orb related stuff - * that I'm not yet paying attention to) - */ + /* FIXME: This is ignored so far. + * See SBP-2 clause 7.4.8. */ unit_characteristics = kv->value.immediate; - SBP2_DEBUG("sbp2_unit_characteristics = %x", - (unsigned int)unit_characteristics); break; case SBP2_FIRMWARE_REVISION_KEY: - /* Firmware revision */ firmware_revision = kv->value.immediate; - SBP2_DEBUG("sbp2_firmware_revision = %x", - (unsigned int)firmware_revision); break; default: + /* FIXME: Check for SBP2_DEVICE_TYPE_AND_LUN_KEY. + * Its "ordered" bit has consequences for command ORB + * list handling. See SBP-2 clauses 4.6, 7.4.11, 10.2 */ break; } } @@ -1626,28 +1330,24 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, /* We would need one SCSI host template for each target to adjust * max_sectors on the fly, therefore warn only. */ if (workarounds & SBP2_WORKAROUND_128K_MAX_TRANS && - (max_sectors * 512) > (128 * 1024)) - SBP2_WARN("Node " NODE_BUS_FMT ": Bridge only supports 128KB " + (sbp2_max_sectors * 512) > (128 * 1024)) + SBP2_INFO("Node " NODE_BUS_FMT ": Bridge only supports 128KB " "max transfer size. WARNING: Current max_sectors " "setting is larger than 128KB (%d sectors)", NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid), - max_sectors); + sbp2_max_sectors); /* If this is a logical unit directory entry, process the parent * to get the values. */ if (ud->flags & UNIT_DIRECTORY_LUN_DIRECTORY) { - struct unit_directory *parent_ud = - container_of(ud->device.parent, struct unit_directory, device); - sbp2_parse_unit_directory(scsi_id, parent_ud); + struct unit_directory *parent_ud = container_of( + ud->device.parent, struct unit_directory, device); + sbp2_parse_unit_directory(lu, parent_ud); } else { - scsi_id->sbp2_management_agent_addr = management_agent_addr; - scsi_id->sbp2_command_set_spec_id = command_set_spec_id; - scsi_id->sbp2_command_set = command_set; - scsi_id->sbp2_unit_characteristics = unit_characteristics; - scsi_id->sbp2_firmware_revision = firmware_revision; - scsi_id->workarounds = workarounds; + lu->management_agent_addr = management_agent_addr; + lu->workarounds = workarounds; if (ud->flags & UNIT_DIRECTORY_HAS_LUN) - scsi_id->sbp2_lun = ORB_SET_LUN(ud->lun); + lu->lun = ORB_SET_LUN(ud->lun); } } @@ -1662,133 +1362,114 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, * the speed that it needs to use, and the max_rec the host supports, and * it takes care of the rest. */ -static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id) +static int sbp2_max_speed_and_size(struct sbp2_lu *lu) { - struct sbp2scsi_host_info *hi = scsi_id->hi; + struct sbp2_fwhost_info *hi = lu->hi; u8 payload; - SBP2_DEBUG_ENTER(); + lu->speed_code = hi->host->speed[NODEID_TO_NODE(lu->ne->nodeid)]; - scsi_id->speed_code = - hi->host->speed[NODEID_TO_NODE(scsi_id->ne->nodeid)]; - - /* Bump down our speed if the user requested it */ - if (scsi_id->speed_code > max_speed) { - scsi_id->speed_code = max_speed; - SBP2_ERR("Forcing SBP-2 max speed down to %s", - hpsb_speedto_str[scsi_id->speed_code]); + if (lu->speed_code > sbp2_max_speed) { + lu->speed_code = sbp2_max_speed; + SBP2_INFO("Reducing speed to %s", + hpsb_speedto_str[sbp2_max_speed]); } /* Payload size is the lesser of what our speed supports and what * our host supports. */ - payload = min(sbp2_speedto_max_payload[scsi_id->speed_code], + payload = min(sbp2_speedto_max_payload[lu->speed_code], (u8) (hi->host->csr.max_rec - 1)); /* If physical DMA is off, work around limitation in ohci1394: * packet size must not exceed PAGE_SIZE */ - if (scsi_id->ne->host->low_addr_space < (1ULL << 32)) + if (lu->ne->host->low_addr_space < (1ULL << 32)) while (SBP2_PAYLOAD_TO_BYTES(payload) + 24 > PAGE_SIZE && payload) payload--; - HPSB_DEBUG("Node " NODE_BUS_FMT ": Max speed [%s] - Max payload [%u]", - NODE_BUS_ARGS(hi->host, scsi_id->ne->nodeid), - hpsb_speedto_str[scsi_id->speed_code], - SBP2_PAYLOAD_TO_BYTES(payload)); + SBP2_INFO("Node " NODE_BUS_FMT ": Max speed [%s] - Max payload [%u]", + NODE_BUS_ARGS(hi->host, lu->ne->nodeid), + hpsb_speedto_str[lu->speed_code], + SBP2_PAYLOAD_TO_BYTES(payload)); - scsi_id->max_payload_size = payload; + lu->max_payload_size = payload; return 0; } -/* - * This function is called in order to perform a SBP-2 agent reset. - */ -static int sbp2_agent_reset(struct scsi_id_instance_data *scsi_id, int wait) +static int sbp2_agent_reset(struct sbp2_lu *lu, int wait) { quadlet_t data; u64 addr; int retval; unsigned long flags; - SBP2_DEBUG_ENTER(); - - cancel_delayed_work(&scsi_id->protocol_work); + /* flush lu->protocol_work */ if (wait) flush_scheduled_work(); data = ntohl(SBP2_AGENT_RESET_DATA); - addr = scsi_id->sbp2_command_block_agent_addr + SBP2_AGENT_RESET_OFFSET; + addr = lu->command_block_agent_addr + SBP2_AGENT_RESET_OFFSET; if (wait) - retval = hpsb_node_write(scsi_id->ne, addr, &data, 4); + retval = hpsb_node_write(lu->ne, addr, &data, 4); else - retval = sbp2util_node_write_no_wait(scsi_id->ne, addr, &data, 4); + retval = sbp2util_node_write_no_wait(lu->ne, addr, &data, 4); if (retval < 0) { SBP2_ERR("hpsb_node_write failed.\n"); return -EIO; } - /* - * Need to make sure orb pointer is written on next command - */ - spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags); - scsi_id->last_orb = NULL; - spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); + /* make sure that the ORB_POINTER is written on next command */ + spin_lock_irqsave(&lu->cmd_orb_lock, flags); + lu->last_orb = NULL; + spin_unlock_irqrestore(&lu->cmd_orb_lock, flags); return 0; } static void sbp2_prep_command_orb_sg(struct sbp2_command_orb *orb, - struct sbp2scsi_host_info *hi, - struct sbp2_command_info *command, + struct sbp2_fwhost_info *hi, + struct sbp2_command_info *cmd, unsigned int scsi_use_sg, struct scatterlist *sgpnt, u32 orb_direction, enum dma_data_direction dma_dir) { - command->dma_dir = dma_dir; + cmd->dma_dir = dma_dir; orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id); orb->misc |= ORB_SET_DIRECTION(orb_direction); - /* Special case if only one element (and less than 64KB in size) */ + /* special case if only one element (and less than 64KB in size) */ if ((scsi_use_sg == 1) && (sgpnt[0].length <= SBP2_MAX_SG_ELEMENT_LENGTH)) { - SBP2_DEBUG("Only one s/g element"); - command->dma_size = sgpnt[0].length; - command->dma_type = CMD_DMA_PAGE; - command->cmd_dma = pci_map_page(hi->host->pdev, - sgpnt[0].page, - sgpnt[0].offset, - command->dma_size, - command->dma_dir); - SBP2_DMA_ALLOC("single page scatter element"); + cmd->dma_size = sgpnt[0].length; + cmd->dma_type = CMD_DMA_PAGE; + cmd->cmd_dma = dma_map_page(hi->host->device.parent, + sgpnt[0].page, sgpnt[0].offset, + cmd->dma_size, cmd->dma_dir); - orb->data_descriptor_lo = command->cmd_dma; - orb->misc |= ORB_SET_DATA_SIZE(command->dma_size); + orb->data_descriptor_lo = cmd->cmd_dma; + orb->misc |= ORB_SET_DATA_SIZE(cmd->dma_size); } else { struct sbp2_unrestricted_page_table *sg_element = - &command->scatter_gather_element[0]; + &cmd->scatter_gather_element[0]; u32 sg_count, sg_len; dma_addr_t sg_addr; - int i, count = pci_map_sg(hi->host->pdev, sgpnt, scsi_use_sg, - dma_dir); - - SBP2_DMA_ALLOC("scatter list"); + int i, count = dma_map_sg(hi->host->device.parent, sgpnt, + scsi_use_sg, dma_dir); - command->dma_size = scsi_use_sg; - command->sge_buffer = sgpnt; + cmd->dma_size = scsi_use_sg; + cmd->sge_buffer = sgpnt; /* use page tables (s/g) */ orb->misc |= ORB_SET_PAGE_TABLE_PRESENT(0x1); - orb->data_descriptor_lo = command->sge_dma; + orb->data_descriptor_lo = cmd->sge_dma; - /* - * Loop through and fill out our sbp-2 page tables - * (and split up anything too large) - */ + /* loop through and fill out our SBP-2 page tables + * (and split up anything too large) */ for (i = 0, sg_count = 0 ; i < count; i++, sgpnt++) { sg_len = sg_dma_len(sgpnt); sg_addr = sg_dma_address(sgpnt); @@ -1808,70 +1489,54 @@ static void sbp2_prep_command_orb_sg(struct sbp2_command_orb *orb, } } - /* Number of page table (s/g) elements */ orb->misc |= ORB_SET_DATA_SIZE(sg_count); - sbp2util_packet_dump(sg_element, - (sizeof(struct sbp2_unrestricted_page_table)) * sg_count, - "sbp2 s/g list", command->sge_dma); - - /* Byte swap page tables if necessary */ sbp2util_cpu_to_be32_buffer(sg_element, - (sizeof(struct sbp2_unrestricted_page_table)) * - sg_count); + (sizeof(struct sbp2_unrestricted_page_table)) * + sg_count); } } static void sbp2_prep_command_orb_no_sg(struct sbp2_command_orb *orb, - struct sbp2scsi_host_info *hi, - struct sbp2_command_info *command, + struct sbp2_fwhost_info *hi, + struct sbp2_command_info *cmd, struct scatterlist *sgpnt, u32 orb_direction, unsigned int scsi_request_bufflen, void *scsi_request_buffer, enum dma_data_direction dma_dir) { - command->dma_dir = dma_dir; - command->dma_size = scsi_request_bufflen; - command->dma_type = CMD_DMA_SINGLE; - command->cmd_dma = pci_map_single(hi->host->pdev, scsi_request_buffer, - command->dma_size, command->dma_dir); + cmd->dma_dir = dma_dir; + cmd->dma_size = scsi_request_bufflen; + cmd->dma_type = CMD_DMA_SINGLE; + cmd->cmd_dma = dma_map_single(hi->host->device.parent, + scsi_request_buffer, + cmd->dma_size, cmd->dma_dir); orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id); orb->misc |= ORB_SET_DIRECTION(orb_direction); - SBP2_DMA_ALLOC("single bulk"); - - /* - * Handle case where we get a command w/o s/g enabled (but - * check for transfers larger than 64K) - */ + /* handle case where we get a command w/o s/g enabled + * (but check for transfers larger than 64K) */ if (scsi_request_bufflen <= SBP2_MAX_SG_ELEMENT_LENGTH) { - orb->data_descriptor_lo = command->cmd_dma; + orb->data_descriptor_lo = cmd->cmd_dma; orb->misc |= ORB_SET_DATA_SIZE(scsi_request_bufflen); } else { + /* The buffer is too large. Turn this into page tables. */ + struct sbp2_unrestricted_page_table *sg_element = - &command->scatter_gather_element[0]; + &cmd->scatter_gather_element[0]; u32 sg_count, sg_len; dma_addr_t sg_addr; - /* - * Need to turn this into page tables, since the - * buffer is too large. - */ - orb->data_descriptor_lo = command->sge_dma; - - /* Use page tables (s/g) */ + orb->data_descriptor_lo = cmd->sge_dma; orb->misc |= ORB_SET_PAGE_TABLE_PRESENT(0x1); - /* - * fill out our sbp-2 page tables (and split up - * the large buffer) - */ + /* fill out our SBP-2 page tables; split up the large buffer */ sg_count = 0; sg_len = scsi_request_bufflen; - sg_addr = command->cmd_dma; + sg_addr = cmd->cmd_dma; while (sg_len) { sg_element[sg_count].segment_base_lo = sg_addr; if (sg_len > SBP2_MAX_SG_ELEMENT_LENGTH) { @@ -1887,50 +1552,40 @@ static void sbp2_prep_command_orb_no_sg(struct sbp2_command_orb *orb, sg_count++; } - /* Number of page table (s/g) elements */ orb->misc |= ORB_SET_DATA_SIZE(sg_count); - sbp2util_packet_dump(sg_element, - (sizeof(struct sbp2_unrestricted_page_table)) * sg_count, - "sbp2 s/g list", command->sge_dma); - - /* Byte swap page tables if necessary */ sbp2util_cpu_to_be32_buffer(sg_element, - (sizeof(struct sbp2_unrestricted_page_table)) * - sg_count); + (sizeof(struct sbp2_unrestricted_page_table)) * + sg_count); } } -/* - * This function is called to create the actual command orb and s/g list - * out of the scsi command itself. - */ -static void sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id, - struct sbp2_command_info *command, +static void sbp2_create_command_orb(struct sbp2_lu *lu, + struct sbp2_command_info *cmd, unchar *scsi_cmd, unsigned int scsi_use_sg, unsigned int scsi_request_bufflen, void *scsi_request_buffer, enum dma_data_direction dma_dir) { - struct sbp2scsi_host_info *hi = scsi_id->hi; + struct sbp2_fwhost_info *hi = lu->hi; struct scatterlist *sgpnt = (struct scatterlist *)scsi_request_buffer; - struct sbp2_command_orb *command_orb = &command->command_orb; + struct sbp2_command_orb *orb = &cmd->command_orb; u32 orb_direction; /* - * Set-up our command ORB.. + * Set-up our command ORB. * * NOTE: We're doing unrestricted page tables (s/g), as this is * best performance (at least with the devices I have). This means * that data_size becomes the number of s/g elements, and * page_size should be zero (for unrestricted). */ - command_orb->next_ORB_hi = ORB_SET_NULL_PTR(1); - command_orb->next_ORB_lo = 0x0; - command_orb->misc = ORB_SET_MAX_PAYLOAD(scsi_id->max_payload_size); - command_orb->misc |= ORB_SET_SPEED(scsi_id->speed_code); - command_orb->misc |= ORB_SET_NOTIFY(1); /* Notify us when complete */ + orb->next_ORB_hi = ORB_SET_NULL_PTR(1); + orb->next_ORB_lo = 0x0; + orb->misc = ORB_SET_MAX_PAYLOAD(lu->max_payload_size); + orb->misc |= ORB_SET_SPEED(lu->speed_code); + orb->misc |= ORB_SET_NOTIFY(1); if (dma_dir == DMA_NONE) orb_direction = ORB_DIRECTION_NO_DATA_TRANSFER; @@ -1939,66 +1594,52 @@ static void sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id, else if (dma_dir == DMA_FROM_DEVICE && scsi_request_bufflen) orb_direction = ORB_DIRECTION_READ_FROM_MEDIA; else { - SBP2_WARN("Falling back to DMA_NONE"); + SBP2_INFO("Falling back to DMA_NONE"); orb_direction = ORB_DIRECTION_NO_DATA_TRANSFER; } - /* Set-up our pagetable stuff */ + /* set up our page table stuff */ if (orb_direction == ORB_DIRECTION_NO_DATA_TRANSFER) { - SBP2_DEBUG("No data transfer"); - command_orb->data_descriptor_hi = 0x0; - command_orb->data_descriptor_lo = 0x0; - command_orb->misc |= ORB_SET_DIRECTION(1); - } else if (scsi_use_sg) { - SBP2_DEBUG("Use scatter/gather"); - sbp2_prep_command_orb_sg(command_orb, hi, command, scsi_use_sg, - sgpnt, orb_direction, dma_dir); - } else { - SBP2_DEBUG("No scatter/gather"); - sbp2_prep_command_orb_no_sg(command_orb, hi, command, sgpnt, - orb_direction, scsi_request_bufflen, + orb->data_descriptor_hi = 0x0; + orb->data_descriptor_lo = 0x0; + orb->misc |= ORB_SET_DIRECTION(1); + } else if (scsi_use_sg) + sbp2_prep_command_orb_sg(orb, hi, cmd, scsi_use_sg, sgpnt, + orb_direction, dma_dir); + else + sbp2_prep_command_orb_no_sg(orb, hi, cmd, sgpnt, orb_direction, + scsi_request_bufflen, scsi_request_buffer, dma_dir); - } - /* Byte swap command ORB if necessary */ - sbp2util_cpu_to_be32_buffer(command_orb, sizeof(struct sbp2_command_orb)); + sbp2util_cpu_to_be32_buffer(orb, sizeof(*orb)); - /* Put our scsi command in the command ORB */ - memset(command_orb->cdb, 0, 12); - memcpy(command_orb->cdb, scsi_cmd, COMMAND_SIZE(*scsi_cmd)); + memset(orb->cdb, 0, 12); + memcpy(orb->cdb, scsi_cmd, COMMAND_SIZE(*scsi_cmd)); } -/* - * This function is called in order to begin a regular SBP-2 command. - */ -static void sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id, - struct sbp2_command_info *command) +static void sbp2_link_orb_command(struct sbp2_lu *lu, + struct sbp2_command_info *cmd) { - struct sbp2scsi_host_info *hi = scsi_id->hi; - struct sbp2_command_orb *command_orb = &command->command_orb; + struct sbp2_fwhost_info *hi = lu->hi; struct sbp2_command_orb *last_orb; dma_addr_t last_orb_dma; - u64 addr = scsi_id->sbp2_command_block_agent_addr; + u64 addr = lu->command_block_agent_addr; quadlet_t data[2]; size_t length; unsigned long flags; - outstanding_orb_incr; - SBP2_ORB_DEBUG("sending command orb %p, total orbs = %x", - command_orb, global_outstanding_command_orbs); - - pci_dma_sync_single_for_device(hi->host->pdev, command->command_orb_dma, - sizeof(struct sbp2_command_orb), - PCI_DMA_TODEVICE); - pci_dma_sync_single_for_device(hi->host->pdev, command->sge_dma, - sizeof(command->scatter_gather_element), - PCI_DMA_BIDIRECTIONAL); - /* - * Check to see if there are any previous orbs to use - */ - spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags); - last_orb = scsi_id->last_orb; - last_orb_dma = scsi_id->last_orb_dma; + dma_sync_single_for_device(hi->host->device.parent, + cmd->command_orb_dma, + sizeof(struct sbp2_command_orb), + DMA_TO_DEVICE); + dma_sync_single_for_device(hi->host->device.parent, cmd->sge_dma, + sizeof(cmd->scatter_gather_element), + DMA_BIDIRECTIONAL); + + /* check to see if there are any previous orbs to use */ + spin_lock_irqsave(&lu->cmd_orb_lock, flags); + last_orb = lu->last_orb; + last_orb_dma = lu->last_orb_dma; if (!last_orb) { /* * last_orb == NULL means: We know that the target's fetch agent @@ -2006,7 +1647,7 @@ static void sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id, */ addr += SBP2_ORB_POINTER_OFFSET; data[0] = ORB_SET_NODE_ID(hi->host->node_id); - data[1] = command->command_orb_dma; + data[1] = cmd->command_orb_dma; sbp2util_cpu_to_be32_buffer(data, 8); length = 8; } else { @@ -2017,27 +1658,26 @@ static void sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id, * The target's fetch agent may or may not have read this * previous ORB yet. */ - pci_dma_sync_single_for_cpu(hi->host->pdev, last_orb_dma, - sizeof(struct sbp2_command_orb), - PCI_DMA_TODEVICE); - last_orb->next_ORB_lo = cpu_to_be32(command->command_orb_dma); + dma_sync_single_for_cpu(hi->host->device.parent, last_orb_dma, + sizeof(struct sbp2_command_orb), + DMA_TO_DEVICE); + last_orb->next_ORB_lo = cpu_to_be32(cmd->command_orb_dma); wmb(); /* Tells hardware that this pointer is valid */ last_orb->next_ORB_hi = 0; - pci_dma_sync_single_for_device(hi->host->pdev, last_orb_dma, - sizeof(struct sbp2_command_orb), - PCI_DMA_TODEVICE); + dma_sync_single_for_device(hi->host->device.parent, + last_orb_dma, + sizeof(struct sbp2_command_orb), + DMA_TO_DEVICE); addr += SBP2_DOORBELL_OFFSET; data[0] = 0; length = 4; } - scsi_id->last_orb = command_orb; - scsi_id->last_orb_dma = command->command_orb_dma; - spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); + lu->last_orb = &cmd->command_orb; + lu->last_orb_dma = cmd->command_orb_dma; + spin_unlock_irqrestore(&lu->cmd_orb_lock, flags); - SBP2_ORB_DEBUG("write to %s register, command orb %p", - last_orb ? "DOORBELL" : "ORB_POINTER", command_orb); - if (sbp2util_node_write_no_wait(scsi_id->ne, addr, data, length)) { + if (sbp2util_node_write_no_wait(lu->ne, addr, data, length)) { /* * sbp2util_node_write_no_wait failed. We certainly ran out * of transaction labels, perhaps just because there were no @@ -2046,52 +1686,29 @@ static void sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id, * the workqueue job will sleep to guaranteedly get a tlabel. * We do not accept new commands until the job is over. */ - scsi_block_requests(scsi_id->scsi_host); - PREPARE_WORK(&scsi_id->protocol_work, + scsi_block_requests(lu->shost); + PREPARE_WORK(&lu->protocol_work, last_orb ? sbp2util_write_doorbell: - sbp2util_write_orb_pointer, - scsi_id); - schedule_work(&scsi_id->protocol_work); + sbp2util_write_orb_pointer); + schedule_work(&lu->protocol_work); } } -/* - * This function is called in order to begin a regular SBP-2 command. - */ -static int sbp2_send_command(struct scsi_id_instance_data *scsi_id, - struct scsi_cmnd *SCpnt, +static int sbp2_send_command(struct sbp2_lu *lu, struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) { - unchar *cmd = (unchar *) SCpnt->cmnd; + unchar *scsi_cmd = (unchar *)SCpnt->cmnd; unsigned int request_bufflen = SCpnt->request_bufflen; - struct sbp2_command_info *command; - - SBP2_DEBUG_ENTER(); - SBP2_DEBUG("SCSI transfer size = %x", request_bufflen); - SBP2_DEBUG("SCSI s/g elements = %x", (unsigned int)SCpnt->use_sg); + struct sbp2_command_info *cmd; - /* - * Allocate a command orb and s/g structure - */ - command = sbp2util_allocate_command_orb(scsi_id, SCpnt, done); - if (!command) { + cmd = sbp2util_allocate_command_orb(lu, SCpnt, done); + if (!cmd) return -EIO; - } - /* - * Now actually fill in the comamnd orb and sbp2 s/g list - */ - sbp2_create_command_orb(scsi_id, command, cmd, SCpnt->use_sg, + sbp2_create_command_orb(lu, cmd, scsi_cmd, SCpnt->use_sg, request_bufflen, SCpnt->request_buffer, SCpnt->sc_data_direction); - - sbp2util_packet_dump(&command->command_orb, sizeof(struct sbp2_command_orb), - "sbp2 command orb", command->command_orb_dma); - - /* - * Link up the orb, and ring the doorbell if needed - */ - sbp2_link_orb_command(scsi_id, command); + sbp2_link_orb_command(lu, cmd); return 0; } @@ -2099,13 +1716,10 @@ static int sbp2_send_command(struct scsi_id_instance_data *scsi_id, /* * Translates SBP-2 status into SCSI sense data for check conditions */ -static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense_data) +static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, + unchar *sense_data) { - SBP2_DEBUG_ENTER(); - - /* - * Ok, it's pretty ugly... ;-) - */ + /* OK, it's pretty ugly... ;-) */ sense_data[0] = 0x70; sense_data[1] = 0x0; sense_data[2] = sbp2_status[9]; @@ -2123,28 +1737,21 @@ static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense sense_data[14] = sbp2_status[20]; sense_data[15] = sbp2_status[21]; - return sbp2_status[8] & 0x3f; /* return scsi status */ + return sbp2_status[8] & 0x3f; } -/* - * This function deals with status writes from the SBP-2 device - */ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int destid, quadlet_t *data, u64 addr, size_t length, u16 fl) { - struct sbp2scsi_host_info *hi; - struct scsi_id_instance_data *scsi_id = NULL, *scsi_id_tmp; + struct sbp2_fwhost_info *hi; + struct sbp2_lu *lu = NULL, *lu_tmp; struct scsi_cmnd *SCpnt = NULL; struct sbp2_status_block *sb; u32 scsi_status = SBP2_SCSI_STATUS_GOOD; - struct sbp2_command_info *command; + struct sbp2_command_info *cmd; unsigned long flags; - SBP2_DEBUG_ENTER(); - - sbp2util_packet_dump(data, length, "sbp2 status write by device", (u32)addr); - if (unlikely(length < 8 || length > sizeof(struct sbp2_status_block))) { SBP2_ERR("Wrong size of status block"); return RCODE_ADDRESS_ERROR; @@ -2158,131 +1765,98 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, SBP2_ERR("host info is NULL - this is bad!"); return RCODE_ADDRESS_ERROR; } - /* - * Find our scsi_id structure by looking at the status fifo address - * written to by the sbp2 device. - */ - list_for_each_entry(scsi_id_tmp, &hi->scsi_ids, scsi_list) { - if (scsi_id_tmp->ne->nodeid == nodeid && - scsi_id_tmp->status_fifo_addr == addr) { - scsi_id = scsi_id_tmp; + + /* Find the unit which wrote the status. */ + list_for_each_entry(lu_tmp, &hi->logical_units, lu_list) { + if (lu_tmp->ne->nodeid == nodeid && + lu_tmp->status_fifo_addr == addr) { + lu = lu_tmp; break; } } - if (unlikely(!scsi_id)) { - SBP2_ERR("scsi_id is NULL - device is gone?"); + if (unlikely(!lu)) { + SBP2_ERR("lu is NULL - device is gone?"); return RCODE_ADDRESS_ERROR; } - /* - * Put response into scsi_id status fifo buffer. The first two bytes + /* Put response into lu status fifo buffer. The first two bytes * come in big endian bit order. Often the target writes only a * truncated status block, minimally the first two quadlets. The rest - * is implied to be zeros. - */ - sb = &scsi_id->status_block; + * is implied to be zeros. */ + sb = &lu->status_block; memset(sb->command_set_dependent, 0, sizeof(sb->command_set_dependent)); memcpy(sb, data, length); sbp2util_be32_to_cpu_buffer(sb, 8); - /* - * Ignore unsolicited status. Handle command ORB status. - */ + /* Ignore unsolicited status. Handle command ORB status. */ if (unlikely(STATUS_GET_SRC(sb->ORB_offset_hi_misc) == 2)) - command = NULL; + cmd = NULL; else - command = sbp2util_find_command_for_orb(scsi_id, - sb->ORB_offset_lo); - if (command) { - SBP2_DEBUG("Found status for command ORB"); - pci_dma_sync_single_for_cpu(hi->host->pdev, command->command_orb_dma, - sizeof(struct sbp2_command_orb), - PCI_DMA_TODEVICE); - pci_dma_sync_single_for_cpu(hi->host->pdev, command->sge_dma, - sizeof(command->scatter_gather_element), - PCI_DMA_BIDIRECTIONAL); - - SBP2_ORB_DEBUG("matched command orb %p", &command->command_orb); - outstanding_orb_decr; - - /* - * Matched status with command, now grab scsi command pointers - * and check status. - */ + cmd = sbp2util_find_command_for_orb(lu, sb->ORB_offset_lo); + if (cmd) { + dma_sync_single_for_cpu(hi->host->device.parent, + cmd->command_orb_dma, + sizeof(struct sbp2_command_orb), + DMA_TO_DEVICE); + dma_sync_single_for_cpu(hi->host->device.parent, cmd->sge_dma, + sizeof(cmd->scatter_gather_element), + DMA_BIDIRECTIONAL); + /* Grab SCSI command pointers and check status. */ /* * FIXME: If the src field in the status is 1, the ORB DMA must * not be reused until status for a subsequent ORB is received. */ - SCpnt = command->Current_SCpnt; - spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags); - sbp2util_mark_command_completed(scsi_id, command); - spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); + SCpnt = cmd->Current_SCpnt; + spin_lock_irqsave(&lu->cmd_orb_lock, flags); + sbp2util_mark_command_completed(lu, cmd); + spin_unlock_irqrestore(&lu->cmd_orb_lock, flags); if (SCpnt) { u32 h = sb->ORB_offset_hi_misc; u32 r = STATUS_GET_RESP(h); if (r != RESP_STATUS_REQUEST_COMPLETE) { - SBP2_WARN("resp 0x%x, sbp_status 0x%x", + SBP2_INFO("resp 0x%x, sbp_status 0x%x", r, STATUS_GET_SBP_STATUS(h)); scsi_status = r == RESP_STATUS_TRANSPORT_FAILURE ? SBP2_SCSI_STATUS_BUSY : SBP2_SCSI_STATUS_COMMAND_TERMINATED; } - /* - * See if the target stored any scsi status information. - */ - if (STATUS_GET_LEN(h) > 1) { - SBP2_DEBUG("CHECK CONDITION"); + + if (STATUS_GET_LEN(h) > 1) scsi_status = sbp2_status_to_sense_data( (unchar *)sb, SCpnt->sense_buffer); - } - /* - * Check to see if the dead bit is set. If so, we'll - * have to initiate a fetch agent reset. - */ - if (STATUS_TEST_DEAD(h)) { - SBP2_DEBUG("Dead bit set - " - "initiating fetch agent reset"); - sbp2_agent_reset(scsi_id, 0); - } - SBP2_ORB_DEBUG("completing command orb %p", &command->command_orb); + + if (STATUS_TEST_DEAD(h)) + sbp2_agent_reset(lu, 0); } - /* - * Check here to see if there are no commands in-use. If there + /* Check here to see if there are no commands in-use. If there * are none, we know that the fetch agent left the active state * _and_ that we did not reactivate it yet. Therefore clear * last_orb so that next time we write directly to the * ORB_POINTER register. That way the fetch agent does not need - * to refetch the next_ORB. - */ - spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags); - if (list_empty(&scsi_id->sbp2_command_orb_inuse)) - scsi_id->last_orb = NULL; - spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); + * to refetch the next_ORB. */ + spin_lock_irqsave(&lu->cmd_orb_lock, flags); + if (list_empty(&lu->cmd_orb_inuse)) + lu->last_orb = NULL; + spin_unlock_irqrestore(&lu->cmd_orb_lock, flags); } else { - /* - * It's probably a login/logout/reconnect status. - */ - if ((sb->ORB_offset_lo == scsi_id->reconnect_orb_dma) || - (sb->ORB_offset_lo == scsi_id->login_orb_dma) || - (sb->ORB_offset_lo == scsi_id->query_logins_orb_dma) || - (sb->ORB_offset_lo == scsi_id->logout_orb_dma)) { - scsi_id->access_complete = 1; - wake_up_interruptible(&access_wq); + /* It's probably status after a management request. */ + if ((sb->ORB_offset_lo == lu->reconnect_orb_dma) || + (sb->ORB_offset_lo == lu->login_orb_dma) || + (sb->ORB_offset_lo == lu->query_logins_orb_dma) || + (sb->ORB_offset_lo == lu->logout_orb_dma)) { + lu->access_complete = 1; + wake_up_interruptible(&sbp2_access_wq); } } - if (SCpnt) { - SBP2_DEBUG("Completing SCSI command"); - sbp2scsi_complete_command(scsi_id, scsi_status, SCpnt, - command->Current_done); - SBP2_ORB_DEBUG("command orb completed"); - } - + if (SCpnt) + sbp2scsi_complete_command(lu, scsi_status, SCpnt, + cmd->Current_done); return RCODE_COMPLETE; } @@ -2290,77 +1864,47 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, * SCSI interface related section **************************************/ -/* - * This routine is the main request entry routine for doing I/O. It is - * called from the scsi stack directly. - */ static int sbp2scsi_queuecommand(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) { - struct scsi_id_instance_data *scsi_id = - (struct scsi_id_instance_data *)SCpnt->device->host->hostdata[0]; - struct sbp2scsi_host_info *hi; + struct sbp2_lu *lu = (struct sbp2_lu *)SCpnt->device->host->hostdata[0]; + struct sbp2_fwhost_info *hi; int result = DID_NO_CONNECT << 16; - SBP2_DEBUG_ENTER(); -#if (CONFIG_IEEE1394_SBP2_DEBUG >= 2) || defined(CONFIG_IEEE1394_SBP2_PACKET_DUMP) - scsi_print_command(SCpnt); -#endif - - if (!sbp2util_node_is_available(scsi_id)) + if (unlikely(!sbp2util_node_is_available(lu))) goto done; - hi = scsi_id->hi; + hi = lu->hi; - if (!hi) { - SBP2_ERR("sbp2scsi_host_info is NULL - this is bad!"); + if (unlikely(!hi)) { + SBP2_ERR("sbp2_fwhost_info is NULL - this is bad!"); goto done; } - /* - * Until we handle multiple luns, just return selection time-out - * to any IO directed at non-zero LUNs - */ - if (SCpnt->device->lun) + /* Multiple units are currently represented to the SCSI core as separate + * targets, not as one target with multiple LUs. Therefore return + * selection time-out to any IO directed at non-zero LUNs. */ + if (unlikely(SCpnt->device->lun)) goto done; - /* - * Check for request sense command, and handle it here - * (autorequest sense) - */ - if (SCpnt->cmnd[0] == REQUEST_SENSE) { - SBP2_DEBUG("REQUEST_SENSE"); - memcpy(SCpnt->request_buffer, SCpnt->sense_buffer, SCpnt->request_bufflen); - memset(SCpnt->sense_buffer, 0, sizeof(SCpnt->sense_buffer)); - sbp2scsi_complete_command(scsi_id, SBP2_SCSI_STATUS_GOOD, SCpnt, done); - return 0; - } - - /* - * Check to see if we are in the middle of a bus reset. - */ - if (!hpsb_node_entry_valid(scsi_id->ne)) { + if (unlikely(!hpsb_node_entry_valid(lu->ne))) { SBP2_ERR("Bus reset in progress - rejecting command"); result = DID_BUS_BUSY << 16; goto done; } - /* - * Bidirectional commands are not yet implemented, - * and unknown transfer direction not handled. - */ - if (SCpnt->sc_data_direction == DMA_BIDIRECTIONAL) { + /* Bidirectional commands are not yet implemented, + * and unknown transfer direction not handled. */ + if (unlikely(SCpnt->sc_data_direction == DMA_BIDIRECTIONAL)) { SBP2_ERR("Cannot handle DMA_BIDIRECTIONAL - rejecting command"); result = DID_ERROR << 16; goto done; } - /* - * Try and send our SCSI command - */ - if (sbp2_send_command(scsi_id, SCpnt, done)) { + if (sbp2_send_command(lu, SCpnt, done)) { SBP2_ERR("Error sending SCSI command"); - sbp2scsi_complete_command(scsi_id, SBP2_SCSI_STATUS_SELECTION_TIMEOUT, + sbp2scsi_complete_command(lu, + SBP2_SCSI_STATUS_SELECTION_TIMEOUT, SCpnt, done); } return 0; @@ -2371,75 +1915,47 @@ done: return 0; } -/* - * This function is called in order to complete all outstanding SBP-2 - * commands (in case of resets, etc.). - */ -static void sbp2scsi_complete_all_commands(struct scsi_id_instance_data *scsi_id, - u32 status) +static void sbp2scsi_complete_all_commands(struct sbp2_lu *lu, u32 status) { - struct sbp2scsi_host_info *hi = scsi_id->hi; + struct sbp2_fwhost_info *hi = lu->hi; struct list_head *lh; - struct sbp2_command_info *command; + struct sbp2_command_info *cmd; unsigned long flags; - SBP2_DEBUG_ENTER(); - - spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags); - while (!list_empty(&scsi_id->sbp2_command_orb_inuse)) { - SBP2_DEBUG("Found pending command to complete"); - lh = scsi_id->sbp2_command_orb_inuse.next; - command = list_entry(lh, struct sbp2_command_info, list); - pci_dma_sync_single_for_cpu(hi->host->pdev, command->command_orb_dma, - sizeof(struct sbp2_command_orb), - PCI_DMA_TODEVICE); - pci_dma_sync_single_for_cpu(hi->host->pdev, command->sge_dma, - sizeof(command->scatter_gather_element), - PCI_DMA_BIDIRECTIONAL); - sbp2util_mark_command_completed(scsi_id, command); - if (command->Current_SCpnt) { - command->Current_SCpnt->result = status << 16; - command->Current_done(command->Current_SCpnt); + spin_lock_irqsave(&lu->cmd_orb_lock, flags); + while (!list_empty(&lu->cmd_orb_inuse)) { + lh = lu->cmd_orb_inuse.next; + cmd = list_entry(lh, struct sbp2_command_info, list); + dma_sync_single_for_cpu(hi->host->device.parent, + cmd->command_orb_dma, + sizeof(struct sbp2_command_orb), + DMA_TO_DEVICE); + dma_sync_single_for_cpu(hi->host->device.parent, cmd->sge_dma, + sizeof(cmd->scatter_gather_element), + DMA_BIDIRECTIONAL); + sbp2util_mark_command_completed(lu, cmd); + if (cmd->Current_SCpnt) { + cmd->Current_SCpnt->result = status << 16; + cmd->Current_done(cmd->Current_SCpnt); } } - spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); + spin_unlock_irqrestore(&lu->cmd_orb_lock, flags); return; } /* - * This function is called in order to complete a regular SBP-2 command. - * - * This can be called in interrupt context. + * Complete a regular SCSI command. Can be called in atomic context. */ -static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id, - u32 scsi_status, struct scsi_cmnd *SCpnt, +static void sbp2scsi_complete_command(struct sbp2_lu *lu, u32 scsi_status, + struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) { - SBP2_DEBUG_ENTER(); - - /* - * Sanity - */ if (!SCpnt) { SBP2_ERR("SCpnt is NULL"); return; } - /* - * If a bus reset is in progress and there was an error, don't - * complete the command, just let it get retried at the end of the - * bus reset. - */ - if (!hpsb_node_entry_valid(scsi_id->ne) - && (scsi_status != SBP2_SCSI_STATUS_GOOD)) { - SBP2_ERR("Bus reset in progress - retry command later"); - return; - } - - /* - * Switch on scsi status - */ switch (scsi_status) { case SBP2_SCSI_STATUS_GOOD: SCpnt->result = DID_OK << 16; @@ -2451,12 +1967,7 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id, break; case SBP2_SCSI_STATUS_CHECK_CONDITION: - SBP2_DEBUG("SBP2_SCSI_STATUS_CHECK_CONDITION"); SCpnt->result = CHECK_CONDITION << 1 | DID_OK << 16; -#if CONFIG_IEEE1394_SBP2_DEBUG >= 1 - scsi_print_command(SCpnt); - scsi_print_sense(SBP2_DEVICE_NAME, SCpnt); -#endif break; case SBP2_SCSI_STATUS_SELECTION_TIMEOUT: @@ -2478,118 +1989,91 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id, SCpnt->result = DID_ERROR << 16; } - /* - * If a bus reset is in progress and there was an error, complete - * the command as busy so that it will get retried. - */ - if (!hpsb_node_entry_valid(scsi_id->ne) + /* If a bus reset is in progress and there was an error, complete + * the command as busy so that it will get retried. */ + if (!hpsb_node_entry_valid(lu->ne) && (scsi_status != SBP2_SCSI_STATUS_GOOD)) { SBP2_ERR("Completing command with busy (bus reset)"); SCpnt->result = DID_BUS_BUSY << 16; } - /* - * If a unit attention occurs, return busy status so it gets - * retried... it could have happened because of a 1394 bus reset - * or hot-plug... - * XXX DID_BUS_BUSY is actually a bad idea because it will defy - * the scsi layer's retry logic. - */ -#if 0 - if ((scsi_status == SBP2_SCSI_STATUS_CHECK_CONDITION) && - (SCpnt->sense_buffer[2] == UNIT_ATTENTION)) { - SBP2_DEBUG("UNIT ATTENTION - return busy"); - SCpnt->result = DID_BUS_BUSY << 16; - } -#endif - - /* - * Tell scsi stack that we're done with this command - */ + /* Tell the SCSI stack that we're done with this command. */ done(SCpnt); } static int sbp2scsi_slave_alloc(struct scsi_device *sdev) { - struct scsi_id_instance_data *scsi_id = - (struct scsi_id_instance_data *)sdev->host->hostdata[0]; + struct sbp2_lu *lu = (struct sbp2_lu *)sdev->host->hostdata[0]; - scsi_id->sdev = sdev; + lu->sdev = sdev; sdev->allow_restart = 1; - if (scsi_id->workarounds & SBP2_WORKAROUND_INQUIRY_36) + if (lu->workarounds & SBP2_WORKAROUND_INQUIRY_36) sdev->inquiry_len = 36; return 0; } static int sbp2scsi_slave_configure(struct scsi_device *sdev) { - struct scsi_id_instance_data *scsi_id = - (struct scsi_id_instance_data *)sdev->host->hostdata[0]; + struct sbp2_lu *lu = (struct sbp2_lu *)sdev->host->hostdata[0]; blk_queue_dma_alignment(sdev->request_queue, (512 - 1)); sdev->use_10_for_rw = 1; + if (sdev->type == TYPE_ROM) + sdev->use_10_for_ms = 1; if (sdev->type == TYPE_DISK && - scsi_id->workarounds & SBP2_WORKAROUND_MODE_SENSE_8) + lu->workarounds & SBP2_WORKAROUND_MODE_SENSE_8) sdev->skip_ms_page_8 = 1; - if (scsi_id->workarounds & SBP2_WORKAROUND_FIX_CAPACITY) + if (lu->workarounds & SBP2_WORKAROUND_FIX_CAPACITY) sdev->fix_capacity = 1; return 0; } static void sbp2scsi_slave_destroy(struct scsi_device *sdev) { - ((struct scsi_id_instance_data *)sdev->host->hostdata[0])->sdev = NULL; + ((struct sbp2_lu *)sdev->host->hostdata[0])->sdev = NULL; return; } /* - * Called by scsi stack when something has really gone wrong. Usually - * called when a command has timed-out for some reason. + * Called by scsi stack when something has really gone wrong. + * Usually called when a command has timed-out for some reason. */ static int sbp2scsi_abort(struct scsi_cmnd *SCpnt) { - struct scsi_id_instance_data *scsi_id = - (struct scsi_id_instance_data *)SCpnt->device->host->hostdata[0]; - struct sbp2scsi_host_info *hi = scsi_id->hi; - struct sbp2_command_info *command; + struct sbp2_lu *lu = (struct sbp2_lu *)SCpnt->device->host->hostdata[0]; + struct sbp2_fwhost_info *hi = lu->hi; + struct sbp2_command_info *cmd; unsigned long flags; - SBP2_ERR("aborting sbp2 command"); + SBP2_INFO("aborting sbp2 command"); scsi_print_command(SCpnt); - if (sbp2util_node_is_available(scsi_id)) { - - /* - * Right now, just return any matching command structures - * to the free pool. - */ - spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags); - command = sbp2util_find_command_for_SCpnt(scsi_id, SCpnt); - if (command) { - SBP2_DEBUG("Found command to abort"); - pci_dma_sync_single_for_cpu(hi->host->pdev, - command->command_orb_dma, - sizeof(struct sbp2_command_orb), - PCI_DMA_TODEVICE); - pci_dma_sync_single_for_cpu(hi->host->pdev, - command->sge_dma, - sizeof(command->scatter_gather_element), - PCI_DMA_BIDIRECTIONAL); - sbp2util_mark_command_completed(scsi_id, command); - if (command->Current_SCpnt) { - command->Current_SCpnt->result = DID_ABORT << 16; - command->Current_done(command->Current_SCpnt); + if (sbp2util_node_is_available(lu)) { + sbp2_agent_reset(lu, 1); + + /* Return a matching command structure to the free pool. */ + spin_lock_irqsave(&lu->cmd_orb_lock, flags); + cmd = sbp2util_find_command_for_SCpnt(lu, SCpnt); + if (cmd) { + dma_sync_single_for_cpu(hi->host->device.parent, + cmd->command_orb_dma, + sizeof(struct sbp2_command_orb), + DMA_TO_DEVICE); + dma_sync_single_for_cpu(hi->host->device.parent, + cmd->sge_dma, + sizeof(cmd->scatter_gather_element), + DMA_BIDIRECTIONAL); + sbp2util_mark_command_completed(lu, cmd); + if (cmd->Current_SCpnt) { + cmd->Current_SCpnt->result = DID_ABORT << 16; + cmd->Current_done(cmd->Current_SCpnt); } } - spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); + spin_unlock_irqrestore(&lu->cmd_orb_lock, flags); - /* - * Initiate a fetch agent reset. - */ - sbp2_agent_reset(scsi_id, 1); - sbp2scsi_complete_all_commands(scsi_id, DID_BUS_BUSY); + sbp2scsi_complete_all_commands(lu, DID_BUS_BUSY); } return SUCCESS; @@ -2600,14 +2084,13 @@ static int sbp2scsi_abort(struct scsi_cmnd *SCpnt) */ static int sbp2scsi_reset(struct scsi_cmnd *SCpnt) { - struct scsi_id_instance_data *scsi_id = - (struct scsi_id_instance_data *)SCpnt->device->host->hostdata[0]; + struct sbp2_lu *lu = (struct sbp2_lu *)SCpnt->device->host->hostdata[0]; - SBP2_ERR("reset requested"); + SBP2_INFO("reset requested"); - if (sbp2util_node_is_available(scsi_id)) { - SBP2_ERR("Generating sbp2 fetch agent reset"); - sbp2_agent_reset(scsi_id, 1); + if (sbp2util_node_is_available(lu)) { + SBP2_INFO("generating sbp2 fetch agent reset"); + sbp2_agent_reset(lu, 1); } return SUCCESS; @@ -2618,90 +2101,50 @@ static ssize_t sbp2_sysfs_ieee1394_id_show(struct device *dev, char *buf) { struct scsi_device *sdev; - struct scsi_id_instance_data *scsi_id; - int lun; + struct sbp2_lu *lu; if (!(sdev = to_scsi_device(dev))) return 0; - if (!(scsi_id = (struct scsi_id_instance_data *)sdev->host->hostdata[0])) + if (!(lu = (struct sbp2_lu *)sdev->host->hostdata[0])) return 0; - lun = ORB_SET_LUN(scsi_id->sbp2_lun); - - return sprintf(buf, "%016Lx:%d:%d\n", (unsigned long long)scsi_id->ne->guid, - scsi_id->ud->id, lun); + return sprintf(buf, "%016Lx:%d:%d\n", (unsigned long long)lu->ne->guid, + lu->ud->id, ORB_SET_LUN(lu->lun)); } -static DEVICE_ATTR(ieee1394_id, S_IRUGO, sbp2_sysfs_ieee1394_id_show, NULL); - -static struct device_attribute *sbp2_sysfs_sdev_attrs[] = { - &dev_attr_ieee1394_id, - NULL -}; MODULE_AUTHOR("Ben Collins <bcollins@debian.org>"); MODULE_DESCRIPTION("IEEE-1394 SBP-2 protocol driver"); MODULE_SUPPORTED_DEVICE(SBP2_DEVICE_NAME); MODULE_LICENSE("GPL"); -/* SCSI host template */ -static struct scsi_host_template scsi_driver_template = { - .module = THIS_MODULE, - .name = "SBP-2 IEEE-1394", - .proc_name = SBP2_DEVICE_NAME, - .queuecommand = sbp2scsi_queuecommand, - .eh_abort_handler = sbp2scsi_abort, - .eh_device_reset_handler = sbp2scsi_reset, - .slave_alloc = sbp2scsi_slave_alloc, - .slave_configure = sbp2scsi_slave_configure, - .slave_destroy = sbp2scsi_slave_destroy, - .this_id = -1, - .sg_tablesize = SG_ALL, - .use_clustering = ENABLE_CLUSTERING, - .cmd_per_lun = SBP2_MAX_CMDS, - .can_queue = SBP2_MAX_CMDS, - .emulated = 1, - .sdev_attrs = sbp2_sysfs_sdev_attrs, -}; - static int sbp2_module_init(void) { int ret; - SBP2_DEBUG_ENTER(); - - /* Module load debug option to force one command at a time (serializing I/O) */ - if (serialize_io) { - SBP2_INFO("Driver forced to serialize I/O (serialize_io=1)"); - SBP2_INFO("Try serialize_io=0 for better performance"); - scsi_driver_template.can_queue = 1; - scsi_driver_template.cmd_per_lun = 1; + if (sbp2_serialize_io) { + sbp2_shost_template.can_queue = 1; + sbp2_shost_template.cmd_per_lun = 1; } if (sbp2_default_workarounds & SBP2_WORKAROUND_128K_MAX_TRANS && - (max_sectors * 512) > (128 * 1024)) - max_sectors = 128 * 1024 / 512; - scsi_driver_template.max_sectors = max_sectors; + (sbp2_max_sectors * 512) > (128 * 1024)) + sbp2_max_sectors = 128 * 1024 / 512; + sbp2_shost_template.max_sectors = sbp2_max_sectors; - /* Register our high level driver with 1394 stack */ hpsb_register_highlevel(&sbp2_highlevel); - ret = hpsb_register_protocol(&sbp2_driver); if (ret) { SBP2_ERR("Failed to register protocol"); hpsb_unregister_highlevel(&sbp2_highlevel); return ret; } - return 0; } static void __exit sbp2_module_exit(void) { - SBP2_DEBUG_ENTER(); - hpsb_unregister_protocol(&sbp2_driver); - hpsb_unregister_highlevel(&sbp2_highlevel); } |