diff options
Diffstat (limited to 'drivers/ide/buddha.c')
| -rw-r--r-- | drivers/ide/buddha.c | 238 |
1 files changed, 0 insertions, 238 deletions
diff --git a/drivers/ide/buddha.c b/drivers/ide/buddha.c deleted file mode 100644 index 46eaf58d881b..000000000000 --- a/drivers/ide/buddha.c +++ /dev/null @@ -1,238 +0,0 @@ -/* - * Amiga Buddha, Catweasel and X-Surf IDE Driver - * - * Copyright (C) 1997, 2001 by Geert Uytterhoeven and others - * - * This driver was written based on the specifications in README.buddha and - * the X-Surf info from Inside_XSurf.txt available at - * http://www.jschoenfeld.com - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - * - * TODO: - * - test it :-) - * - tune the timings using the speed-register - */ - -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/blkdev.h> -#include <linux/zorro.h> -#include <linux/ide.h> -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/amigahw.h> -#include <asm/amigaints.h> - - - /* - * The Buddha has 2 IDE interfaces, the Catweasel has 3, X-Surf has 2 - */ - -#define BUDDHA_NUM_HWIFS 2 -#define CATWEASEL_NUM_HWIFS 3 -#define XSURF_NUM_HWIFS 2 - -#define MAX_NUM_HWIFS 3 - - /* - * Bases of the IDE interfaces (relative to the board address) - */ - -#define BUDDHA_BASE1 0x800 -#define BUDDHA_BASE2 0xa00 -#define BUDDHA_BASE3 0xc00 - -#define XSURF_BASE1 0xb000 /* 2.5" Interface */ -#define XSURF_BASE2 0xd000 /* 3.5" Interface */ - -static u_int buddha_bases[CATWEASEL_NUM_HWIFS] __initdata = { - BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3 -}; - -static u_int xsurf_bases[XSURF_NUM_HWIFS] __initdata = { - XSURF_BASE1, XSURF_BASE2 -}; - - /* - * Offsets from one of the above bases - */ - -#define BUDDHA_CONTROL 0x11a - - /* - * Other registers - */ - -#define BUDDHA_IRQ1 0xf00 /* MSB = 1, Harddisk is source of */ -#define BUDDHA_IRQ2 0xf40 /* interrupt */ -#define BUDDHA_IRQ3 0xf80 - -#define XSURF_IRQ1 0x7e -#define XSURF_IRQ2 0x7e - -static int buddha_irqports[CATWEASEL_NUM_HWIFS] __initdata = { - BUDDHA_IRQ1, BUDDHA_IRQ2, BUDDHA_IRQ3 -}; - -static int xsurf_irqports[XSURF_NUM_HWIFS] __initdata = { - XSURF_IRQ1, XSURF_IRQ2 -}; - -#define BUDDHA_IRQ_MR 0xfc0 /* master interrupt enable */ - - - /* - * Board information - */ - -typedef enum BuddhaType_Enum { - BOARD_BUDDHA, BOARD_CATWEASEL, BOARD_XSURF -} BuddhaType; - -static const char *buddha_board_name[] = { "Buddha", "Catweasel", "X-Surf" }; - - /* - * Check and acknowledge the interrupt status - */ - -static int buddha_test_irq(ide_hwif_t *hwif) -{ - unsigned char ch; - - ch = z_readb(hwif->io_ports.irq_addr); - if (!(ch & 0x80)) - return 0; - return 1; -} - -static void xsurf_clear_irq(ide_drive_t *drive) -{ - /* - * X-Surf needs 0 written to IRQ register to ensure ISA bit A11 stays at 0 - */ - z_writeb(0, drive->hwif->io_ports.irq_addr); -} - -static void __init buddha_setup_ports(struct ide_hw *hw, unsigned long base, - unsigned long ctl, unsigned long irq_port) -{ - int i; - - memset(hw, 0, sizeof(*hw)); - - hw->io_ports.data_addr = base; - - for (i = 1; i < 8; i++) - hw->io_ports_array[i] = base + 2 + i * 4; - - hw->io_ports.ctl_addr = ctl; - hw->io_ports.irq_addr = irq_port; - - hw->irq = IRQ_AMIGA_PORTS; -} - -static const struct ide_port_ops buddha_port_ops = { - .test_irq = buddha_test_irq, -}; - -static const struct ide_port_ops xsurf_port_ops = { - .clear_irq = xsurf_clear_irq, - .test_irq = buddha_test_irq, -}; - -static const struct ide_port_info buddha_port_info = { - .port_ops = &buddha_port_ops, - .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, - .irq_flags = IRQF_SHARED, - .chipset = ide_generic, -}; - - /* - * Probe for a Buddha or Catweasel IDE interface - */ - -static int __init buddha_init(void) -{ - struct zorro_dev *z = NULL; - u_long buddha_board = 0; - BuddhaType type; - int buddha_num_hwifs, i; - - while ((z = zorro_find_device(ZORRO_WILDCARD, z))) { - unsigned long board; - struct ide_hw hw[MAX_NUM_HWIFS], *hws[MAX_NUM_HWIFS]; - struct ide_port_info d = buddha_port_info; - - if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) { - buddha_num_hwifs = BUDDHA_NUM_HWIFS; - type=BOARD_BUDDHA; - } else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) { - buddha_num_hwifs = CATWEASEL_NUM_HWIFS; - type=BOARD_CATWEASEL; - } else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) { - buddha_num_hwifs = XSURF_NUM_HWIFS; - type=BOARD_XSURF; - d.port_ops = &xsurf_port_ops; - } else - continue; - - board = z->resource.start; - - if(type != BOARD_XSURF) { - if (!request_mem_region(board+BUDDHA_BASE1, 0x800, "IDE")) - continue; - } else { - if (!request_mem_region(board+XSURF_BASE1, 0x1000, "IDE")) - continue; - if (!request_mem_region(board+XSURF_BASE2, 0x1000, "IDE")) - goto fail_base2; - if (!request_mem_region(board+XSURF_IRQ1, 0x8, "IDE")) { - release_mem_region(board+XSURF_BASE2, 0x1000); -fail_base2: - release_mem_region(board+XSURF_BASE1, 0x1000); - continue; - } - } - buddha_board = (unsigned long)ZTWO_VADDR(board); - - /* write to BUDDHA_IRQ_MR to enable the board IRQ */ - /* X-Surf doesn't have this. IRQs are always on */ - if (type != BOARD_XSURF) - z_writeb(0, buddha_board+BUDDHA_IRQ_MR); - - printk(KERN_INFO "ide: %s IDE controller\n", - buddha_board_name[type]); - - for (i = 0; i < buddha_num_hwifs; i++) { - unsigned long base, ctl, irq_port; - - if (type != BOARD_XSURF) { - base = buddha_board + buddha_bases[i]; - ctl = base + BUDDHA_CONTROL; - irq_port = buddha_board + buddha_irqports[i]; - } else { - base = buddha_board + xsurf_bases[i]; - /* X-Surf has no CS1* (Control/AltStat) */ - ctl = 0; - irq_port = buddha_board + xsurf_irqports[i]; - } - - buddha_setup_ports(&hw[i], base, ctl, irq_port); - - hws[i] = &hw[i]; - } - - ide_host_add(&d, hws, i, NULL); - } - - return 0; -} - -module_init(buddha_init); - -MODULE_LICENSE("GPL"); |