diff options
Diffstat (limited to 'drivers/i2c')
| -rw-r--r-- | drivers/i2c/busses/i2c-axxia.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-common.c | 9 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-pcidrv.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-platdrv.c | 20 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-mxs.c | 4 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-rk3x.c | 44 |
6 files changed, 35 insertions, 46 deletions
diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c index bdf3b50de8ad..c1c74ce08407 100644 --- a/drivers/i2c/busses/i2c-axxia.c +++ b/drivers/i2c/busses/i2c-axxia.c @@ -118,7 +118,7 @@ #define SDA_HOLD_TIME 0x90 /** - * axxia_i2c_dev - I2C device context + * struct axxia_i2c_dev - I2C device context * @base: pointer to register struct * @msg: pointer to current message * @msg_r: pointer to current read message (sequence transfer) diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c index a3240ece55b2..581e02cc979a 100644 --- a/drivers/i2c/busses/i2c-designware-common.c +++ b/drivers/i2c/busses/i2c-designware-common.c @@ -351,7 +351,8 @@ u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset) * * If your hardware is free from tHD;STA issue, try this one. */ - return DIV_ROUND_CLOSEST(ic_clk * tSYMBOL, MICRO) - 8 + offset; + return DIV_ROUND_CLOSEST_ULL((u64)ic_clk * tSYMBOL, MICRO) - + 8 + offset; else /* * Conditional expression: @@ -367,7 +368,8 @@ u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset) * The reason why we need to take into account "tf" here, * is the same as described in i2c_dw_scl_lcnt(). */ - return DIV_ROUND_CLOSEST(ic_clk * (tSYMBOL + tf), MICRO) - 3 + offset; + return DIV_ROUND_CLOSEST_ULL((u64)ic_clk * (tSYMBOL + tf), MICRO) - + 3 + offset; } u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset) @@ -383,7 +385,8 @@ u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset) * account the fall time of SCL signal (tf). Default tf value * should be 0.3 us, for safety. */ - return DIV_ROUND_CLOSEST(ic_clk * (tLOW + tf), MICRO) - 1 + offset; + return DIV_ROUND_CLOSEST_ULL((u64)ic_clk * (tLOW + tf), MICRO) - + 1 + offset; } int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev) diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index e499f96506c5..782fe1ef3ca1 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -396,6 +396,8 @@ static const struct pci_device_id i2_designware_pci_ids[] = { { PCI_VDEVICE(ATI, 0x73a4), navi_amd }, { PCI_VDEVICE(ATI, 0x73e4), navi_amd }, { PCI_VDEVICE(ATI, 0x73c4), navi_amd }, + { PCI_VDEVICE(ATI, 0x7444), navi_amd }, + { PCI_VDEVICE(ATI, 0x7464), navi_amd }, { 0,} }; MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index ba043b547393..74182db03a88 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -351,13 +351,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) if (dev->flags & ACCESS_NO_IRQ_SUSPEND) { dev_pm_set_driver_flags(&pdev->dev, - DPM_FLAG_SMART_PREPARE | - DPM_FLAG_MAY_SKIP_RESUME); + DPM_FLAG_SMART_PREPARE); } else { dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_SMART_PREPARE | - DPM_FLAG_SMART_SUSPEND | - DPM_FLAG_MAY_SKIP_RESUME); + DPM_FLAG_SMART_SUSPEND); } device_enable_async_suspend(&pdev->dev); @@ -419,21 +417,8 @@ static int dw_i2c_plat_prepare(struct device *dev) */ return !has_acpi_companion(dev); } - -static void dw_i2c_plat_complete(struct device *dev) -{ - /* - * The device can only be in runtime suspend at this point if it has not - * been resumed throughout the ending system suspend/resume cycle, so if - * the platform firmware might mess up with it, request the runtime PM - * framework to resume it. - */ - if (pm_runtime_suspended(dev) && pm_resume_via_firmware()) - pm_request_resume(dev); -} #else #define dw_i2c_plat_prepare NULL -#define dw_i2c_plat_complete NULL #endif #ifdef CONFIG_PM @@ -483,7 +468,6 @@ static int __maybe_unused dw_i2c_plat_resume(struct device *dev) static const struct dev_pm_ops dw_i2c_dev_pm_ops = { .prepare = dw_i2c_plat_prepare, - .complete = dw_i2c_plat_complete, SET_LATE_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume) SET_RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend, dw_i2c_plat_runtime_resume, NULL) }; diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 5af5cffc444e..d113bed79545 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -826,8 +826,8 @@ static int mxs_i2c_probe(struct platform_device *pdev) /* Setup the DMA */ i2c->dmach = dma_request_chan(dev, "rx-tx"); if (IS_ERR(i2c->dmach)) { - dev_err(dev, "Failed to request dma\n"); - return PTR_ERR(i2c->dmach); + return dev_err_probe(dev, PTR_ERR(i2c->dmach), + "Failed to request dma\n"); } platform_set_drvdata(pdev, i2c); diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index d1658ed76562..b31cf4f18f85 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -80,7 +80,7 @@ enum { #define DEFAULT_SCL_RATE (100 * 1000) /* Hz */ /** - * struct i2c_spec_values: + * struct i2c_spec_values - I2C specification values for various modes * @min_hold_start_ns: min hold time (repeated) START condition * @min_low_ns: min LOW period of the SCL clock * @min_high_ns: min HIGH period of the SCL cloc @@ -136,7 +136,7 @@ static const struct i2c_spec_values fast_mode_plus_spec = { }; /** - * struct rk3x_i2c_calced_timings: + * struct rk3x_i2c_calced_timings - calculated V1 timings * @div_low: Divider output for low * @div_high: Divider output for high * @tuning: Used to adjust setup/hold data time, @@ -159,7 +159,7 @@ enum rk3x_i2c_state { }; /** - * struct rk3x_i2c_soc_data: + * struct rk3x_i2c_soc_data - SOC-specific data * @grf_offset: offset inside the grf regmap for setting the i2c type * @calc_timings: Callback function for i2c timing information calculated */ @@ -239,7 +239,8 @@ static inline void rk3x_i2c_clean_ipd(struct rk3x_i2c *i2c) } /** - * Generate a START condition, which triggers a REG_INT_START interrupt. + * rk3x_i2c_start - Generate a START condition, which triggers a REG_INT_START interrupt. + * @i2c: target controller data */ static void rk3x_i2c_start(struct rk3x_i2c *i2c) { @@ -258,8 +259,8 @@ static void rk3x_i2c_start(struct rk3x_i2c *i2c) } /** - * Generate a STOP condition, which triggers a REG_INT_STOP interrupt. - * + * rk3x_i2c_stop - Generate a STOP condition, which triggers a REG_INT_STOP interrupt. + * @i2c: target controller data * @error: Error code to return in rk3x_i2c_xfer */ static void rk3x_i2c_stop(struct rk3x_i2c *i2c, int error) @@ -298,7 +299,8 @@ static void rk3x_i2c_stop(struct rk3x_i2c *i2c, int error) } /** - * Setup a read according to i2c->msg + * rk3x_i2c_prepare_read - Setup a read according to i2c->msg + * @i2c: target controller data */ static void rk3x_i2c_prepare_read(struct rk3x_i2c *i2c) { @@ -329,7 +331,8 @@ static void rk3x_i2c_prepare_read(struct rk3x_i2c *i2c) } /** - * Fill the transmit buffer with data from i2c->msg + * rk3x_i2c_fill_transmit_buf - Fill the transmit buffer with data from i2c->msg + * @i2c: target controller data */ static void rk3x_i2c_fill_transmit_buf(struct rk3x_i2c *i2c) { @@ -532,11 +535,10 @@ out: } /** - * Get timing values of I2C specification - * + * rk3x_i2c_get_spec - Get timing values of I2C specification * @speed: Desired SCL frequency * - * Returns: Matched i2c spec values. + * Return: Matched i2c_spec_values. */ static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed) { @@ -549,13 +551,12 @@ static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed) } /** - * Calculate divider values for desired SCL frequency - * + * rk3x_i2c_v0_calc_timings - Calculate divider values for desired SCL frequency * @clk_rate: I2C input clock rate * @t: Known I2C timing information * @t_calc: Caculated rk3x private timings that would be written into regs * - * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case + * Return: %0 on success, -%EINVAL if the goal SCL rate is too slow. In that case * a best-effort divider value is returned in divs. If the target rate is * too high, we silently use the highest possible rate. */ @@ -710,13 +711,12 @@ static int rk3x_i2c_v0_calc_timings(unsigned long clk_rate, } /** - * Calculate timing values for desired SCL frequency - * + * rk3x_i2c_v1_calc_timings - Calculate timing values for desired SCL frequency * @clk_rate: I2C input clock rate * @t: Known I2C timing information * @t_calc: Caculated rk3x private timings that would be written into regs * - * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case + * Return: %0 on success, -%EINVAL if the goal SCL rate is too slow. In that case * a best-effort divider value is returned in divs. If the target rate is * too high, we silently use the highest possible rate. * The following formulas are v1's method to calculate timings. @@ -960,14 +960,14 @@ static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long } /** - * Setup I2C registers for an I2C operation specified by msgs, num. - * - * Must be called with i2c->lock held. - * + * rk3x_i2c_setup - Setup I2C registers for an I2C operation specified by msgs, num. + * @i2c: target controller data * @msgs: I2C msgs to process * @num: Number of msgs * - * returns: Number of I2C msgs processed or negative in case of error + * Must be called with i2c->lock held. + * + * Return: Number of I2C msgs processed or negative in case of error */ static int rk3x_i2c_setup(struct rk3x_i2c *i2c, struct i2c_msg *msgs, int num) { |