diff options
Diffstat (limited to 'drivers/i2c')
| -rw-r--r-- | drivers/i2c/busses/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/i2c/busses/Makefile | 1 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-sirf.c | 475 |
3 files changed, 0 insertions, 486 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index fd919f9339d6..ce2efb56df54 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -993,16 +993,6 @@ config I2C_SIMTEC This driver can also be built as a module. If so, the module will be called i2c-simtec. -config I2C_SIRF - tristate "CSR SiRFprimaII I2C interface" - depends on ARCH_SIRF || COMPILE_TEST - help - If you say yes to this option, support will be included for the - CSR SiRFprimaII I2C interface. - - This driver can also be built as a module. If so, the module - will be called i2c-sirf. - config I2C_SPRD tristate "Spreadtrum I2C interface" depends on I2C=y && (ARCH_SPRD || COMPILE_TEST) diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 894ff95885b8..1c30bba977ef 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -98,7 +98,6 @@ obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o -obj-$(CONFIG_I2C_SIRF) += i2c-sirf.o obj-$(CONFIG_I2C_SPRD) += i2c-sprd.o obj-$(CONFIG_I2C_ST) += i2c-st.o obj-$(CONFIG_I2C_STM32F4) += i2c-stm32f4.o diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c deleted file mode 100644 index 30db8fafe078..000000000000 --- a/drivers/i2c/busses/i2c-sirf.c +++ /dev/null @@ -1,475 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * I2C bus driver for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> - -#define SIRFSOC_I2C_CLK_CTRL 0x00 -#define SIRFSOC_I2C_STATUS 0x0C -#define SIRFSOC_I2C_CTRL 0x10 -#define SIRFSOC_I2C_IO_CTRL 0x14 -#define SIRFSOC_I2C_SDA_DELAY 0x18 -#define SIRFSOC_I2C_CMD_START 0x1C -#define SIRFSOC_I2C_CMD_BUF 0x30 -#define SIRFSOC_I2C_DATA_BUF 0x80 - -#define SIRFSOC_I2C_CMD_BUF_MAX 16 -#define SIRFSOC_I2C_DATA_BUF_MAX 16 - -#define SIRFSOC_I2C_CMD(x) (SIRFSOC_I2C_CMD_BUF + (x)*0x04) -#define SIRFSOC_I2C_DATA_MASK(x) (0xFF<<(((x)&3)*8)) -#define SIRFSOC_I2C_DATA_SHIFT(x) (((x)&3)*8) - -#define SIRFSOC_I2C_DIV_MASK (0xFFFF) - -/* I2C status flags */ -#define SIRFSOC_I2C_STAT_BUSY BIT(0) -#define SIRFSOC_I2C_STAT_TIP BIT(1) -#define SIRFSOC_I2C_STAT_NACK BIT(2) -#define SIRFSOC_I2C_STAT_TR_INT BIT(4) -#define SIRFSOC_I2C_STAT_STOP BIT(6) -#define SIRFSOC_I2C_STAT_CMD_DONE BIT(8) -#define SIRFSOC_I2C_STAT_ERR BIT(9) -#define SIRFSOC_I2C_CMD_INDEX (0x1F<<16) - -/* I2C control flags */ -#define SIRFSOC_I2C_RESET BIT(0) -#define SIRFSOC_I2C_CORE_EN BIT(1) -#define SIRFSOC_I2C_MASTER_MODE BIT(2) -#define SIRFSOC_I2C_CMD_DONE_EN BIT(11) -#define SIRFSOC_I2C_ERR_INT_EN BIT(12) - -#define SIRFSOC_I2C_SDA_DELAY_MASK (0xFF) -#define SIRFSOC_I2C_SCLF_FILTER (3<<8) - -#define SIRFSOC_I2C_START_CMD BIT(0) - -#define SIRFSOC_I2C_CMD_RP(x) ((x)&0x7) -#define SIRFSOC_I2C_NACK BIT(3) -#define SIRFSOC_I2C_WRITE BIT(4) -#define SIRFSOC_I2C_READ BIT(5) -#define SIRFSOC_I2C_STOP BIT(6) -#define SIRFSOC_I2C_START BIT(7) - -#define SIRFSOC_I2C_ERR_NOACK 1 -#define SIRFSOC_I2C_ERR_TIMEOUT 2 - -struct sirfsoc_i2c { - void __iomem *base; - struct clk *clk; - u32 cmd_ptr; /* Current position in CMD buffer */ - u8 *buf; /* Buffer passed by user */ - u32 msg_len; /* Message length */ - u32 finished_len; /* number of bytes read/written */ - u32 read_cmd_len; /* number of read cmd sent */ - int msg_read; /* 1 indicates a read message */ - int err_status; /* 1 indicates an error on bus */ - - u32 sda_delay; /* For suspend/resume */ - u32 clk_div; - int last; /* Last message in transfer, STOP cmd can be sent */ - - struct completion done; /* indicates completion of message transfer */ - struct i2c_adapter adapter; -}; - -static void i2c_sirfsoc_read_data(struct sirfsoc_i2c *siic) -{ - u32 data = 0; - int i; - - for (i = 0; i < siic->read_cmd_len; i++) { - if (!(i & 0x3)) - data = readl(siic->base + SIRFSOC_I2C_DATA_BUF + i); - siic->buf[siic->finished_len++] = - (u8)((data & SIRFSOC_I2C_DATA_MASK(i)) >> - SIRFSOC_I2C_DATA_SHIFT(i)); - } -} - -static void i2c_sirfsoc_queue_cmd(struct sirfsoc_i2c *siic) -{ - u32 regval; - int i = 0; - - if (siic->msg_read) { - while (((siic->finished_len + i) < siic->msg_len) - && (siic->cmd_ptr < SIRFSOC_I2C_CMD_BUF_MAX)) { - regval = SIRFSOC_I2C_READ | SIRFSOC_I2C_CMD_RP(0); - if (((siic->finished_len + i) == - (siic->msg_len - 1)) && siic->last) - regval |= SIRFSOC_I2C_STOP | SIRFSOC_I2C_NACK; - writel(regval, - siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++)); - i++; - } - - siic->read_cmd_len = i; - } else { - while ((siic->cmd_ptr < SIRFSOC_I2C_CMD_BUF_MAX - 1) - && (siic->finished_len < siic->msg_len)) { - regval = SIRFSOC_I2C_WRITE | SIRFSOC_I2C_CMD_RP(0); - if ((siic->finished_len == (siic->msg_len - 1)) - && siic->last) - regval |= SIRFSOC_I2C_STOP; - writel(regval, - siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++)); - writel(siic->buf[siic->finished_len++], - siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++)); - } - } - siic->cmd_ptr = 0; - - /* Trigger the transfer */ - writel(SIRFSOC_I2C_START_CMD, siic->base + SIRFSOC_I2C_CMD_START); -} - -static irqreturn_t i2c_sirfsoc_irq(int irq, void *dev_id) -{ - struct sirfsoc_i2c *siic = (struct sirfsoc_i2c *)dev_id; - u32 i2c_stat = readl(siic->base + SIRFSOC_I2C_STATUS); - - if (i2c_stat & SIRFSOC_I2C_STAT_ERR) { - /* Error conditions */ - siic->err_status = SIRFSOC_I2C_ERR_NOACK; - writel(SIRFSOC_I2C_STAT_ERR, siic->base + SIRFSOC_I2C_STATUS); - - if (i2c_stat & SIRFSOC_I2C_STAT_NACK) - dev_dbg(&siic->adapter.dev, "ACK not received\n"); - else - dev_err(&siic->adapter.dev, "I2C error\n"); - - /* - * Due to hardware ANOMALY, we need to reset I2C earlier after - * we get NOACK while accessing non-existing clients, otherwise - * we will get errors even we access existing clients later - */ - writel(readl(siic->base + SIRFSOC_I2C_CTRL) | SIRFSOC_I2C_RESET, - siic->base + SIRFSOC_I2C_CTRL); - while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET) - cpu_relax(); - - complete(&siic->done); - } else if (i2c_stat & SIRFSOC_I2C_STAT_CMD_DONE) { - /* CMD buffer execution complete */ - if (siic->msg_read) - i2c_sirfsoc_read_data(siic); - if (siic->finished_len == siic->msg_len) - complete(&siic->done); - else /* Fill a new CMD buffer for left data */ - i2c_sirfsoc_queue_cmd(siic); - - writel(SIRFSOC_I2C_STAT_CMD_DONE, siic->base + SIRFSOC_I2C_STATUS); - } - - return IRQ_HANDLED; -} - -static void i2c_sirfsoc_set_address(struct sirfsoc_i2c *siic, - struct i2c_msg *msg) -{ - unsigned char addr; - u32 regval = SIRFSOC_I2C_START | SIRFSOC_I2C_CMD_RP(0) | SIRFSOC_I2C_WRITE; - - /* no data and last message -> add STOP */ - if (siic->last && (msg->len == 0)) - regval |= SIRFSOC_I2C_STOP; - - writel(regval, siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++)); - - addr = i2c_8bit_addr_from_msg(msg); - - /* Reverse direction bit */ - if (msg->flags & I2C_M_REV_DIR_ADDR) - addr ^= 1; - - writel(addr, siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++)); -} - -static int i2c_sirfsoc_xfer_msg(struct sirfsoc_i2c *siic, struct i2c_msg *msg) -{ - u32 regval = readl(siic->base + SIRFSOC_I2C_CTRL); - /* timeout waiting for the xfer to finish or fail */ - int timeout = msecs_to_jiffies((msg->len + 1) * 50); - - i2c_sirfsoc_set_address(siic, msg); - - writel(regval | SIRFSOC_I2C_CMD_DONE_EN | SIRFSOC_I2C_ERR_INT_EN, - siic->base + SIRFSOC_I2C_CTRL); - i2c_sirfsoc_queue_cmd(siic); - - if (wait_for_completion_timeout(&siic->done, timeout) == 0) { - siic->err_status = SIRFSOC_I2C_ERR_TIMEOUT; - dev_err(&siic->adapter.dev, "Transfer timeout\n"); - } - - writel(regval & ~(SIRFSOC_I2C_CMD_DONE_EN | SIRFSOC_I2C_ERR_INT_EN), - siic->base + SIRFSOC_I2C_CTRL); - writel(0, siic->base + SIRFSOC_I2C_CMD_START); - - /* i2c control doesn't response, reset it */ - if (siic->err_status == SIRFSOC_I2C_ERR_TIMEOUT) { - writel(readl(siic->base + SIRFSOC_I2C_CTRL) | SIRFSOC_I2C_RESET, - siic->base + SIRFSOC_I2C_CTRL); - while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET) - cpu_relax(); - } - return siic->err_status ? -EAGAIN : 0; -} - -static u32 i2c_sirfsoc_func(struct i2c_adapter *adap) -{ - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; -} - -static int i2c_sirfsoc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, - int num) -{ - struct sirfsoc_i2c *siic = adap->algo_data; - int i, ret; - - clk_enable(siic->clk); - - for (i = 0; i < num; i++) { - siic->buf = msgs[i].buf; - siic->msg_len = msgs[i].len; - siic->msg_read = !!(msgs[i].flags & I2C_M_RD); - siic->err_status = 0; - siic->cmd_ptr = 0; - siic->finished_len = 0; - siic->last = (i == (num - 1)); - - ret = i2c_sirfsoc_xfer_msg(siic, &msgs[i]); - if (ret) { - clk_disable(siic->clk); - return ret; - } - } - - clk_disable(siic->clk); - return num; -} - -/* I2C algorithms associated with this master controller driver */ -static const struct i2c_algorithm i2c_sirfsoc_algo = { - .master_xfer = i2c_sirfsoc_xfer, - .functionality = i2c_sirfsoc_func, -}; - -static int i2c_sirfsoc_probe(struct platform_device *pdev) -{ - struct sirfsoc_i2c *siic; - struct i2c_adapter *adap; - struct clk *clk; - int bitrate; - int ctrl_speed; - int irq; - - int err; - u32 regval; - - clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(clk)) { - err = PTR_ERR(clk); - dev_err(&pdev->dev, "Clock get failed\n"); - goto err_get_clk; - } - - err = clk_prepare(clk); - if (err) { - dev_err(&pdev->dev, "Clock prepare failed\n"); - goto err_clk_prep; - } - - err = clk_enable(clk); - if (err) { - dev_err(&pdev->dev, "Clock enable failed\n"); - goto err_clk_en; - } - - ctrl_speed = clk_get_rate(clk); - - siic = devm_kzalloc(&pdev->dev, sizeof(*siic), GFP_KERNEL); - if (!siic) { - err = -ENOMEM; - goto out; - } - adap = &siic->adapter; - adap->class = I2C_CLASS_DEPRECATED; - - siic->base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(siic->base)) { - err = PTR_ERR(siic->base); - goto out; - } - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - err = irq; - goto out; - } - err = devm_request_irq(&pdev->dev, irq, i2c_sirfsoc_irq, 0, - dev_name(&pdev->dev), siic); - if (err) - goto out; - - adap->algo = &i2c_sirfsoc_algo; - adap->algo_data = siic; - adap->retries = 3; - - adap->dev.of_node = pdev->dev.of_node; - adap->dev.parent = &pdev->dev; - adap->nr = pdev->id; - - strlcpy(adap->name, "sirfsoc-i2c", sizeof(adap->name)); - - platform_set_drvdata(pdev, adap); - init_completion(&siic->done); - - /* Controller initialisation */ - - writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL); - while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET) - cpu_relax(); - writel(SIRFSOC_I2C_CORE_EN | SIRFSOC_I2C_MASTER_MODE, - siic->base + SIRFSOC_I2C_CTRL); - - siic->clk = clk; - - err = of_property_read_u32(pdev->dev.of_node, - "clock-frequency", &bitrate); - if (err < 0) - bitrate = I2C_MAX_STANDARD_MODE_FREQ; - - /* - * Due to some hardware design issues, we need to tune the formula. - * Since i2c is open drain interface that allows the slave to - * stall the transaction by holding the SCL line at '0', the RTL - * implementation is waiting for SCL feedback from the pin after - * setting it to High-Z ('1'). This wait adds to the high-time - * interval counter few cycles of the input synchronization - * (depending on the SCL_FILTER_REG field), and also the time it - * takes for the board pull-up resistor to rise the SCL line. - * For slow SCL settings these additions are negligible, - * but they start to affect the speed when clock is set to faster - * frequencies. - * Through the actual tests, use the different user_div value(which - * in the divider formula 'Fio / (Fi2c * user_div)') to adapt - * the different ranges of i2c bus clock frequency, to make the SCL - * more accurate. - */ - if (bitrate <= 30000) - regval = ctrl_speed / (bitrate * 5); - else if (bitrate > 30000 && bitrate <= 280000) - regval = (2 * ctrl_speed) / (bitrate * 11); - else - regval = ctrl_speed / (bitrate * 6); - - writel(regval, siic->base + SIRFSOC_I2C_CLK_CTRL); - if (regval > 0xFF) - writel(0xFF, siic->base + SIRFSOC_I2C_SDA_DELAY); - else - writel(regval, siic->base + SIRFSOC_I2C_SDA_DELAY); - - err = i2c_add_numbered_adapter(adap); - if (err < 0) - goto out; - - clk_disable(clk); - - dev_info(&pdev->dev, " I2C adapter ready to operate\n"); - - return 0; - -out: - clk_disable(clk); -err_clk_en: - clk_unprepare(clk); -err_clk_prep: - clk_put(clk); -err_get_clk: - return err; -} - -static int i2c_sirfsoc_remove(struct platform_device *pdev) -{ - struct i2c_adapter *adapter = platform_get_drvdata(pdev); - struct sirfsoc_i2c *siic = adapter->algo_data; - - writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL); - i2c_del_adapter(adapter); - clk_unprepare(siic->clk); - clk_put(siic->clk); - return 0; -} - -#ifdef CONFIG_PM -static int i2c_sirfsoc_suspend(struct device *dev) -{ - struct i2c_adapter *adapter = dev_get_drvdata(dev); - struct sirfsoc_i2c *siic = adapter->algo_data; - - clk_enable(siic->clk); - siic->sda_delay = readl(siic->base + SIRFSOC_I2C_SDA_DELAY); - siic->clk_div = readl(siic->base + SIRFSOC_I2C_CLK_CTRL); - clk_disable(siic->clk); - return 0; -} - -static int i2c_sirfsoc_resume(struct device *dev) -{ - struct i2c_adapter *adapter = dev_get_drvdata(dev); - struct sirfsoc_i2c *siic = adapter->algo_data; - - clk_enable(siic->clk); - writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL); - while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET) - cpu_relax(); - writel(SIRFSOC_I2C_CORE_EN | SIRFSOC_I2C_MASTER_MODE, - siic->base + SIRFSOC_I2C_CTRL); - writel(siic->clk_div, siic->base + SIRFSOC_I2C_CLK_CTRL); - writel(siic->sda_delay, siic->base + SIRFSOC_I2C_SDA_DELAY); - clk_disable(siic->clk); - return 0; -} - -static const struct dev_pm_ops i2c_sirfsoc_pm_ops = { - .suspend = i2c_sirfsoc_suspend, - .resume = i2c_sirfsoc_resume, -}; -#endif - -static const struct of_device_id sirfsoc_i2c_of_match[] = { - { .compatible = "sirf,prima2-i2c", }, - {}, -}; -MODULE_DEVICE_TABLE(of, sirfsoc_i2c_of_match); - -static struct platform_driver i2c_sirfsoc_driver = { - .driver = { - .name = "sirfsoc_i2c", -#ifdef CONFIG_PM - .pm = &i2c_sirfsoc_pm_ops, -#endif - .of_match_table = sirfsoc_i2c_of_match, - }, - .probe = i2c_sirfsoc_probe, - .remove = i2c_sirfsoc_remove, -}; -module_platform_driver(i2c_sirfsoc_driver); - -MODULE_DESCRIPTION("SiRF SoC I2C master controller driver"); -MODULE_AUTHOR("Zhiwu Song <Zhiwu.Song@csr.com>"); -MODULE_AUTHOR("Xiangzhen Ye <Xiangzhen.Ye@csr.com>"); -MODULE_LICENSE("GPL v2"); |