summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses')
-rw-r--r--drivers/i2c/busses/i2c-at91.c24
-rw-r--r--drivers/i2c/busses/i2c-bcm-iproc.c2
-rw-r--r--drivers/i2c/busses/i2c-bcm-kona.c4
-rw-r--r--drivers/i2c/busses/i2c-brcmstb.c2
-rw-r--r--drivers/i2c/busses/i2c-cadence.c2
-rw-r--r--drivers/i2c/busses/i2c-cros-ec-tunnel.c2
-rw-r--r--drivers/i2c/busses/i2c-designware-core.c16
-rw-r--r--drivers/i2c/busses/i2c-eg20t.c18
-rw-r--r--drivers/i2c/busses/i2c-meson.c6
-rw-r--r--drivers/i2c/busses/i2c-ocores.c14
-rw-r--r--drivers/i2c/busses/i2c-qup.c3
-rw-r--r--drivers/i2c/busses/i2c-rcar.c2
-rw-r--r--drivers/i2c/busses/i2c-rk3x.c14
-rw-r--r--drivers/i2c/busses/i2c-sh_mobile.c2
14 files changed, 71 insertions, 40 deletions
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index f23372669f77..1bb97f658b47 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -38,6 +38,7 @@
#define AT91_I2C_TIMEOUT msecs_to_jiffies(100) /* transfer timeout */
#define AT91_I2C_DMA_THRESHOLD 8 /* enable DMA if transfer size is bigger than this threshold */
#define AUTOSUSPEND_TIMEOUT 2000
+#define AT91_I2C_MAX_ALT_CMD_DATA_SIZE 256
/* AT91 TWI register definitions */
#define AT91_TWI_CR 0x0000 /* Control Register */
@@ -141,6 +142,7 @@ struct at91_twi_dev {
unsigned twi_cwgr_reg;
struct at91_twi_pdata *pdata;
bool use_dma;
+ bool use_alt_cmd;
bool recv_len_abort;
u32 fifo_size;
struct at91_twi_dma dma;
@@ -269,7 +271,7 @@ static void at91_twi_write_next_byte(struct at91_twi_dev *dev)
/* send stop when last byte has been written */
if (--dev->buf_len == 0)
- if (!dev->pdata->has_alt_cmd)
+ if (!dev->use_alt_cmd)
at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
dev_dbg(dev->dev, "wrote 0x%x, to go %d\n", *dev->buf, dev->buf_len);
@@ -292,7 +294,7 @@ static void at91_twi_write_data_dma_callback(void *data)
* we just have to enable TXCOMP one.
*/
at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
- if (!dev->pdata->has_alt_cmd)
+ if (!dev->use_alt_cmd)
at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
}
@@ -410,7 +412,7 @@ static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
}
/* send stop if second but last byte has been read */
- if (!dev->pdata->has_alt_cmd && dev->buf_len == 1)
+ if (!dev->use_alt_cmd && dev->buf_len == 1)
at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
dev_dbg(dev->dev, "read 0x%x, to go %d\n", *dev->buf, dev->buf_len);
@@ -426,7 +428,7 @@ static void at91_twi_read_data_dma_callback(void *data)
dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg[0]),
dev->buf_len, DMA_FROM_DEVICE);
- if (!dev->pdata->has_alt_cmd) {
+ if (!dev->use_alt_cmd) {
/* The last two bytes have to be read without using dma */
dev->buf += dev->buf_len - 2;
dev->buf_len = 2;
@@ -443,7 +445,7 @@ static void at91_twi_read_data_dma(struct at91_twi_dev *dev)
struct dma_chan *chan_rx = dma->chan_rx;
size_t buf_len;
- buf_len = (dev->pdata->has_alt_cmd) ? dev->buf_len : dev->buf_len - 2;
+ buf_len = (dev->use_alt_cmd) ? dev->buf_len : dev->buf_len - 2;
dma->direction = DMA_FROM_DEVICE;
/* Keep in mind that we won't use dma to read the last two bytes */
@@ -651,7 +653,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
unsigned start_flags = AT91_TWI_START;
/* if only one byte is to be read, immediately stop transfer */
- if (!has_alt_cmd && dev->buf_len <= 1 &&
+ if (!dev->use_alt_cmd && dev->buf_len <= 1 &&
!(dev->msg->flags & I2C_M_RECV_LEN))
start_flags |= AT91_TWI_STOP;
at91_twi_write(dev, AT91_TWI_CR, start_flags);
@@ -745,7 +747,7 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
int ret;
unsigned int_addr_flag = 0;
struct i2c_msg *m_start = msg;
- bool is_read, use_alt_cmd = false;
+ bool is_read;
dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num);
@@ -768,14 +770,16 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
at91_twi_write(dev, AT91_TWI_IADR, internal_address);
}
+ dev->use_alt_cmd = false;
is_read = (m_start->flags & I2C_M_RD);
if (dev->pdata->has_alt_cmd) {
- if (m_start->len > 0) {
+ if (m_start->len > 0 &&
+ m_start->len < AT91_I2C_MAX_ALT_CMD_DATA_SIZE) {
at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_ACMEN);
at91_twi_write(dev, AT91_TWI_ACR,
AT91_TWI_ACR_DATAL(m_start->len) |
((is_read) ? AT91_TWI_ACR_DIR : 0));
- use_alt_cmd = true;
+ dev->use_alt_cmd = true;
} else {
at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_ACMDIS);
}
@@ -784,7 +788,7 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
at91_twi_write(dev, AT91_TWI_MMR,
(m_start->addr << 16) |
int_addr_flag |
- ((!use_alt_cmd && is_read) ? AT91_TWI_MREAD : 0));
+ ((!dev->use_alt_cmd && is_read) ? AT91_TWI_MREAD : 0));
dev->buf_len = m_start->len;
dev->buf = m_start->buf;
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index 19c843828fe2..95f7cac76f89 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -158,7 +158,7 @@ static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data)
if (status & BIT(IS_M_START_BUSY_SHIFT)) {
iproc_i2c->xfer_is_done = 1;
- complete_all(&iproc_i2c->done);
+ complete(&iproc_i2c->done);
}
writel(status, iproc_i2c->base + IS_OFFSET);
diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c
index ac9f47679c3a..258cb9a40ab3 100644
--- a/drivers/i2c/busses/i2c-bcm-kona.c
+++ b/drivers/i2c/busses/i2c-bcm-kona.c
@@ -229,7 +229,7 @@ static irqreturn_t bcm_kona_i2c_isr(int irq, void *devid)
dev->base + TXFCR_OFFSET);
writel(status & ~ISR_RESERVED_MASK, dev->base + ISR_OFFSET);
- complete_all(&dev->done);
+ complete(&dev->done);
return IRQ_HANDLED;
}
@@ -643,7 +643,7 @@ static int bcm_kona_i2c_xfer(struct i2c_adapter *adapter,
if (rc < 0) {
dev_err(dev->device,
"restart cmd failed rc = %d\n", rc);
- goto xfer_send_stop;
+ goto xfer_send_stop;
}
}
diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
index 3f5a4d71d3bf..385b57bfcb38 100644
--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -228,7 +228,7 @@ static irqreturn_t brcmstb_i2c_isr(int irq, void *devid)
return IRQ_NONE;
brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE);
- complete_all(&dev->done);
+ complete(&dev->done);
dev_dbg(dev->device, "isr handled");
return IRQ_HANDLED;
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 90bbd9f9dd8f..3c16a2f7c673 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -767,7 +767,7 @@ static int cdns_i2c_setclk(unsigned long clk_in, struct cdns_i2c *id)
* depending on the scaling direction.
*
* Return: NOTIFY_STOP if the rate change should be aborted, NOTIFY_OK
- * to acknowedge the change, NOTIFY_DONE if the notification is
+ * to acknowledge the change, NOTIFY_DONE if the notification is
* considered irrelevant.
*/
static int cdns_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long
diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
index a0d95ff682ae..2d5ff86398d0 100644
--- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c
+++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
@@ -215,7 +215,7 @@ static int ec_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg i2c_msgs[],
msg->outsize = request_len;
msg->insize = response_len;
- result = cros_ec_cmd_xfer(bus->ec, msg);
+ result = cros_ec_cmd_xfer_status(bus->ec, msg);
if (result < 0) {
dev_err(dev, "Error transferring EC i2c message %d\n", result);
goto exit;
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index c6922b806fb7..fcd973d5131e 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -367,13 +367,17 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
/* Configure SDA Hold Time if required */
- if (dev->sda_hold_time) {
- reg = dw_readl(dev, DW_IC_COMP_VERSION);
- if (reg >= DW_IC_SDA_HOLD_MIN_VERS)
+ reg = dw_readl(dev, DW_IC_COMP_VERSION);
+ if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
+ if (dev->sda_hold_time) {
dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
- else
- dev_warn(dev->dev,
- "Hardware too old to adjust SDA hold time.");
+ } else {
+ /* Keep previous hold time setting if no one set it */
+ dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD);
+ }
+ } else {
+ dev_warn(dev->dev,
+ "Hardware too old to adjust SDA hold time.\n");
}
/* Configure Tx/Rx FIFO threshold levels */
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index 137125b5eae7..5ce71ce7b6c4 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -773,13 +773,6 @@ static int pch_i2c_probe(struct pci_dev *pdev,
/* Set the number of I2C channel instance */
adap_info->ch_num = id->driver_data;
- ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED,
- KBUILD_MODNAME, adap_info);
- if (ret) {
- pch_pci_err(pdev, "request_irq FAILED\n");
- goto err_request_irq;
- }
-
for (i = 0; i < adap_info->ch_num; i++) {
pch_adap = &adap_info->pch_data[i].pch_adapter;
adap_info->pch_i2c_suspended = false;
@@ -797,6 +790,17 @@ static int pch_i2c_probe(struct pci_dev *pdev,
pch_adap->dev.of_node = pdev->dev.of_node;
pch_adap->dev.parent = &pdev->dev;
+ }
+
+ ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED,
+ KBUILD_MODNAME, adap_info);
+ if (ret) {
+ pch_pci_err(pdev, "request_irq FAILED\n");
+ goto err_request_irq;
+ }
+
+ for (i = 0; i < adap_info->ch_num; i++) {
+ pch_adap = &adap_info->pch_data[i].pch_adapter;
pch_i2c_init(&adap_info->pch_data[i]);
diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
index 71d3929adf54..76e28980904f 100644
--- a/drivers/i2c/busses/i2c-meson.c
+++ b/drivers/i2c/busses/i2c-meson.c
@@ -211,7 +211,7 @@ static void meson_i2c_stop(struct meson_i2c *i2c)
meson_i2c_add_token(i2c, TOKEN_STOP);
} else {
i2c->state = STATE_IDLE;
- complete_all(&i2c->done);
+ complete(&i2c->done);
}
}
@@ -238,7 +238,7 @@ static irqreturn_t meson_i2c_irq(int irqno, void *dev_id)
dev_dbg(i2c->dev, "error bit set\n");
i2c->error = -ENXIO;
i2c->state = STATE_IDLE;
- complete_all(&i2c->done);
+ complete(&i2c->done);
goto out;
}
@@ -269,7 +269,7 @@ static irqreturn_t meson_i2c_irq(int irqno, void *dev_id)
break;
case STATE_STOP:
i2c->state = STATE_IDLE;
- complete_all(&i2c->done);
+ complete(&i2c->done);
break;
case STATE_IDLE:
break;
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index dfa7a4b4a91d..ac88a524143e 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -379,6 +379,7 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
if (!clock_frequency_present) {
dev_err(&pdev->dev,
"Missing required parameter 'opencores,ip-clock-frequency'\n");
+ clk_disable_unprepare(i2c->clk);
return -ENODEV;
}
i2c->ip_clock_khz = clock_frequency / 1000;
@@ -467,20 +468,21 @@ static int ocores_i2c_probe(struct platform_device *pdev)
default:
dev_err(&pdev->dev, "Unsupported I/O width (%d)\n",
i2c->reg_io_width);
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_clk;
}
}
ret = ocores_init(&pdev->dev, i2c);
if (ret)
- return ret;
+ goto err_clk;
init_waitqueue_head(&i2c->wait);
ret = devm_request_irq(&pdev->dev, irq, ocores_isr, 0,
pdev->name, i2c);
if (ret) {
dev_err(&pdev->dev, "Cannot claim IRQ\n");
- return ret;
+ goto err_clk;
}
/* hook up driver to tree */
@@ -494,7 +496,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
ret = i2c_add_adapter(&i2c->adap);
if (ret) {
dev_err(&pdev->dev, "Failed to add adapter\n");
- return ret;
+ goto err_clk;
}
/* add in known devices to the bus */
@@ -504,6 +506,10 @@ static int ocores_i2c_probe(struct platform_device *pdev)
}
return 0;
+
+err_clk:
+ clk_disable_unprepare(i2c->clk);
+ return ret;
}
static int ocores_i2c_remove(struct platform_device *pdev)
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 501bd15cb78e..a8497cfdae6f 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -1599,7 +1599,8 @@ static int qup_i2c_pm_resume_runtime(struct device *device)
#ifdef CONFIG_PM_SLEEP
static int qup_i2c_suspend(struct device *device)
{
- qup_i2c_pm_suspend_runtime(device);
+ if (!pm_runtime_suspended(device))
+ return qup_i2c_pm_suspend_runtime(device);
return 0;
}
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 52407f3c9e1c..9bd849dacee8 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -378,7 +378,7 @@ static void rcar_i2c_dma(struct rcar_i2c_priv *priv)
}
dma_addr = dma_map_single(chan->device->dev, buf, len, dir);
- if (dma_mapping_error(dev, dma_addr)) {
+ if (dma_mapping_error(chan->device->dev, dma_addr)) {
dev_dbg(dev, "dma map failed, using PIO\n");
return;
}
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 2bc8b01153d6..5c5b7cada8be 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -918,7 +918,7 @@ static void rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate)
* Code adapted from i2c-cadence.c.
*
* Return: NOTIFY_STOP if the rate change should be aborted, NOTIFY_OK
- * to acknowedge the change, NOTIFY_DONE if the notification is
+ * to acknowledge the change, NOTIFY_DONE if the notification is
* considered irrelevant.
*/
static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long
@@ -1111,6 +1111,15 @@ static int rk3x_i2c_xfer(struct i2c_adapter *adap,
return ret < 0 ? ret : num;
}
+static __maybe_unused int rk3x_i2c_resume(struct device *dev)
+{
+ struct rk3x_i2c *i2c = dev_get_drvdata(dev);
+
+ rk3x_i2c_adapt_div(i2c, clk_get_rate(i2c->clk));
+
+ return 0;
+}
+
static u32 rk3x_i2c_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING;
@@ -1334,12 +1343,15 @@ static int rk3x_i2c_remove(struct platform_device *pdev)
return 0;
}
+static SIMPLE_DEV_PM_OPS(rk3x_i2c_pm_ops, NULL, rk3x_i2c_resume);
+
static struct platform_driver rk3x_i2c_driver = {
.probe = rk3x_i2c_probe,
.remove = rk3x_i2c_remove,
.driver = {
.name = "rk3x-i2c",
.of_match_table = rk3x_i2c_match,
+ .pm = &rk3x_i2c_pm_ops,
},
};
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 6fb3e2645992..05b1eeab9cf5 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -610,7 +610,7 @@ static void sh_mobile_i2c_xfer_dma(struct sh_mobile_i2c_data *pd)
return;
dma_addr = dma_map_single(chan->device->dev, pd->msg->buf, pd->msg->len, dir);
- if (dma_mapping_error(pd->dev, dma_addr)) {
+ if (dma_mapping_error(chan->device->dev, dma_addr)) {
dev_dbg(pd->dev, "dma map failed, using PIO\n");
return;
}
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-06 20:44:35 +0300