diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-rk3x.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-rk3x.c | 44 |
1 files changed, 22 insertions, 22 deletions
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index d1658ed76562..b31cf4f18f85 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -80,7 +80,7 @@ enum { #define DEFAULT_SCL_RATE (100 * 1000) /* Hz */ /** - * struct i2c_spec_values: + * struct i2c_spec_values - I2C specification values for various modes * @min_hold_start_ns: min hold time (repeated) START condition * @min_low_ns: min LOW period of the SCL clock * @min_high_ns: min HIGH period of the SCL cloc @@ -136,7 +136,7 @@ static const struct i2c_spec_values fast_mode_plus_spec = { }; /** - * struct rk3x_i2c_calced_timings: + * struct rk3x_i2c_calced_timings - calculated V1 timings * @div_low: Divider output for low * @div_high: Divider output for high * @tuning: Used to adjust setup/hold data time, @@ -159,7 +159,7 @@ enum rk3x_i2c_state { }; /** - * struct rk3x_i2c_soc_data: + * struct rk3x_i2c_soc_data - SOC-specific data * @grf_offset: offset inside the grf regmap for setting the i2c type * @calc_timings: Callback function for i2c timing information calculated */ @@ -239,7 +239,8 @@ static inline void rk3x_i2c_clean_ipd(struct rk3x_i2c *i2c) } /** - * Generate a START condition, which triggers a REG_INT_START interrupt. + * rk3x_i2c_start - Generate a START condition, which triggers a REG_INT_START interrupt. + * @i2c: target controller data */ static void rk3x_i2c_start(struct rk3x_i2c *i2c) { @@ -258,8 +259,8 @@ static void rk3x_i2c_start(struct rk3x_i2c *i2c) } /** - * Generate a STOP condition, which triggers a REG_INT_STOP interrupt. - * + * rk3x_i2c_stop - Generate a STOP condition, which triggers a REG_INT_STOP interrupt. + * @i2c: target controller data * @error: Error code to return in rk3x_i2c_xfer */ static void rk3x_i2c_stop(struct rk3x_i2c *i2c, int error) @@ -298,7 +299,8 @@ static void rk3x_i2c_stop(struct rk3x_i2c *i2c, int error) } /** - * Setup a read according to i2c->msg + * rk3x_i2c_prepare_read - Setup a read according to i2c->msg + * @i2c: target controller data */ static void rk3x_i2c_prepare_read(struct rk3x_i2c *i2c) { @@ -329,7 +331,8 @@ static void rk3x_i2c_prepare_read(struct rk3x_i2c *i2c) } /** - * Fill the transmit buffer with data from i2c->msg + * rk3x_i2c_fill_transmit_buf - Fill the transmit buffer with data from i2c->msg + * @i2c: target controller data */ static void rk3x_i2c_fill_transmit_buf(struct rk3x_i2c *i2c) { @@ -532,11 +535,10 @@ out: } /** - * Get timing values of I2C specification - * + * rk3x_i2c_get_spec - Get timing values of I2C specification * @speed: Desired SCL frequency * - * Returns: Matched i2c spec values. + * Return: Matched i2c_spec_values. */ static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed) { @@ -549,13 +551,12 @@ static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed) } /** - * Calculate divider values for desired SCL frequency - * + * rk3x_i2c_v0_calc_timings - Calculate divider values for desired SCL frequency * @clk_rate: I2C input clock rate * @t: Known I2C timing information * @t_calc: Caculated rk3x private timings that would be written into regs * - * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case + * Return: %0 on success, -%EINVAL if the goal SCL rate is too slow. In that case * a best-effort divider value is returned in divs. If the target rate is * too high, we silently use the highest possible rate. */ @@ -710,13 +711,12 @@ static int rk3x_i2c_v0_calc_timings(unsigned long clk_rate, } /** - * Calculate timing values for desired SCL frequency - * + * rk3x_i2c_v1_calc_timings - Calculate timing values for desired SCL frequency * @clk_rate: I2C input clock rate * @t: Known I2C timing information * @t_calc: Caculated rk3x private timings that would be written into regs * - * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case + * Return: %0 on success, -%EINVAL if the goal SCL rate is too slow. In that case * a best-effort divider value is returned in divs. If the target rate is * too high, we silently use the highest possible rate. * The following formulas are v1's method to calculate timings. @@ -960,14 +960,14 @@ static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long } /** - * Setup I2C registers for an I2C operation specified by msgs, num. - * - * Must be called with i2c->lock held. - * + * rk3x_i2c_setup - Setup I2C registers for an I2C operation specified by msgs, num. + * @i2c: target controller data * @msgs: I2C msgs to process * @num: Number of msgs * - * returns: Number of I2C msgs processed or negative in case of error + * Must be called with i2c->lock held. + * + * Return: Number of I2C msgs processed or negative in case of error */ static int rk3x_i2c_setup(struct rk3x_i2c *i2c, struct i2c_msg *msgs, int num) { |