summaryrefslogtreecommitdiff
path: root/drivers/hwmon/pmbus
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/pmbus')
-rw-r--r--drivers/hwmon/pmbus/Kconfig1
-rw-r--r--drivers/hwmon/pmbus/ibm-cffps.c288
-rw-r--r--drivers/hwmon/pmbus/ir35221.c189
-rw-r--r--drivers/hwmon/pmbus/lm25066.c67
-rw-r--r--drivers/hwmon/pmbus/max31785.c294
-rw-r--r--drivers/hwmon/pmbus/pmbus.h41
-rw-r--r--drivers/hwmon/pmbus/pmbus_core.c273
7 files changed, 871 insertions, 282 deletions
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 08479006c7f9..6e4298e99222 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -39,6 +39,7 @@ config SENSORS_ADM1275
config SENSORS_IBM_CFFPS
tristate "IBM Common Form Factor Power Supply"
+ depends on LEDS_CLASS
help
If you say yes here you get hardware monitoring support for the IBM
Common Form Factor power supply.
diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c
index cb56da6834e5..93d9a9ea112b 100644
--- a/drivers/hwmon/pmbus/ibm-cffps.c
+++ b/drivers/hwmon/pmbus/ibm-cffps.c
@@ -8,12 +8,29 @@
*/
#include <linux/bitops.h>
+#include <linux/debugfs.h>
#include <linux/device.h>
+#include <linux/fs.h>
#include <linux/i2c.h>
+#include <linux/jiffies.h>
+#include <linux/leds.h>
#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pmbus.h>
#include "pmbus.h"
+#define CFFPS_FRU_CMD 0x9A
+#define CFFPS_PN_CMD 0x9B
+#define CFFPS_SN_CMD 0x9E
+#define CFFPS_CCIN_CMD 0xBD
+#define CFFPS_FW_CMD_START 0xFA
+#define CFFPS_FW_NUM_BYTES 4
+#define CFFPS_SYS_CONFIG_CMD 0xDA
+
+#define CFFPS_INPUT_HISTORY_CMD 0xD6
+#define CFFPS_INPUT_HISTORY_SIZE 100
+
/* STATUS_MFR_SPECIFIC bits */
#define CFFPS_MFR_FAN_FAULT BIT(0)
#define CFFPS_MFR_THERMAL_FAULT BIT(1)
@@ -24,6 +41,153 @@
#define CFFPS_MFR_VAUX_FAULT BIT(6)
#define CFFPS_MFR_CURRENT_SHARE_WARNING BIT(7)
+#define CFFPS_LED_BLINK BIT(0)
+#define CFFPS_LED_ON BIT(1)
+#define CFFPS_LED_OFF BIT(2)
+#define CFFPS_BLINK_RATE_MS 250
+
+enum {
+ CFFPS_DEBUGFS_INPUT_HISTORY = 0,
+ CFFPS_DEBUGFS_FRU,
+ CFFPS_DEBUGFS_PN,
+ CFFPS_DEBUGFS_SN,
+ CFFPS_DEBUGFS_CCIN,
+ CFFPS_DEBUGFS_FW,
+ CFFPS_DEBUGFS_NUM_ENTRIES
+};
+
+struct ibm_cffps_input_history {
+ struct mutex update_lock;
+ unsigned long last_update;
+
+ u8 byte_count;
+ u8 data[CFFPS_INPUT_HISTORY_SIZE];
+};
+
+struct ibm_cffps {
+ struct i2c_client *client;
+
+ struct ibm_cffps_input_history input_history;
+
+ int debugfs_entries[CFFPS_DEBUGFS_NUM_ENTRIES];
+
+ char led_name[32];
+ u8 led_state;
+ struct led_classdev led;
+};
+
+#define to_psu(x, y) container_of((x), struct ibm_cffps, debugfs_entries[(y)])
+
+static ssize_t ibm_cffps_read_input_history(struct ibm_cffps *psu,
+ char __user *buf, size_t count,
+ loff_t *ppos)
+{
+ int rc;
+ u8 msgbuf0[1] = { CFFPS_INPUT_HISTORY_CMD };
+ u8 msgbuf1[CFFPS_INPUT_HISTORY_SIZE + 1] = { 0 };
+ struct i2c_msg msg[2] = {
+ {
+ .addr = psu->client->addr,
+ .flags = psu->client->flags,
+ .len = 1,
+ .buf = msgbuf0,
+ }, {
+ .addr = psu->client->addr,
+ .flags = psu->client->flags | I2C_M_RD,
+ .len = CFFPS_INPUT_HISTORY_SIZE + 1,
+ .buf = msgbuf1,
+ },
+ };
+
+ if (!*ppos) {
+ mutex_lock(&psu->input_history.update_lock);
+ if (time_after(jiffies, psu->input_history.last_update + HZ)) {
+ /*
+ * Use a raw i2c transfer, since we need more bytes
+ * than Linux I2C supports through smbus xfr (only 32).
+ */
+ rc = i2c_transfer(psu->client->adapter, msg, 2);
+ if (rc < 0) {
+ mutex_unlock(&psu->input_history.update_lock);
+ return rc;
+ }
+
+ psu->input_history.byte_count = msgbuf1[0];
+ memcpy(psu->input_history.data, &msgbuf1[1],
+ CFFPS_INPUT_HISTORY_SIZE);
+ psu->input_history.last_update = jiffies;
+ }
+
+ mutex_unlock(&psu->input_history.update_lock);
+ }
+
+ return simple_read_from_buffer(buf, count, ppos,
+ psu->input_history.data,
+ psu->input_history.byte_count);
+}
+
+static ssize_t ibm_cffps_debugfs_op(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ u8 cmd;
+ int i, rc;
+ int *idxp = file->private_data;
+ int idx = *idxp;
+ struct ibm_cffps *psu = to_psu(idxp, idx);
+ char data[I2C_SMBUS_BLOCK_MAX] = { 0 };
+
+ switch (idx) {
+ case CFFPS_DEBUGFS_INPUT_HISTORY:
+ return ibm_cffps_read_input_history(psu, buf, count, ppos);
+ case CFFPS_DEBUGFS_FRU:
+ cmd = CFFPS_FRU_CMD;
+ break;
+ case CFFPS_DEBUGFS_PN:
+ cmd = CFFPS_PN_CMD;
+ break;
+ case CFFPS_DEBUGFS_SN:
+ cmd = CFFPS_SN_CMD;
+ break;
+ case CFFPS_DEBUGFS_CCIN:
+ rc = i2c_smbus_read_word_swapped(psu->client, CFFPS_CCIN_CMD);
+ if (rc < 0)
+ return rc;
+
+ rc = snprintf(data, 5, "%04X", rc);
+ goto done;
+ case CFFPS_DEBUGFS_FW:
+ for (i = 0; i < CFFPS_FW_NUM_BYTES; ++i) {
+ rc = i2c_smbus_read_byte_data(psu->client,
+ CFFPS_FW_CMD_START + i);
+ if (rc < 0)
+ return rc;
+
+ snprintf(&data[i * 2], 3, "%02X", rc);
+ }
+
+ rc = i * 2;
+ goto done;
+ default:
+ return -EINVAL;
+ }
+
+ rc = i2c_smbus_read_block_data(psu->client, cmd, data);
+ if (rc < 0)
+ return rc;
+
+done:
+ data[rc] = '\n';
+ rc += 2;
+
+ return simple_read_from_buffer(buf, count, ppos, data, rc);
+}
+
+static const struct file_operations ibm_cffps_fops = {
+ .llseek = noop_llseek,
+ .read = ibm_cffps_debugfs_op,
+ .open = simple_open,
+};
+
static int ibm_cffps_read_byte_data(struct i2c_client *client, int page,
int reg)
{
@@ -105,6 +269,69 @@ static int ibm_cffps_read_word_data(struct i2c_client *client, int page,
return rc;
}
+static void ibm_cffps_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ int rc;
+ struct ibm_cffps *psu = container_of(led_cdev, struct ibm_cffps, led);
+
+ if (brightness == LED_OFF) {
+ psu->led_state = CFFPS_LED_OFF;
+ } else {
+ brightness = LED_FULL;
+ if (psu->led_state != CFFPS_LED_BLINK)
+ psu->led_state = CFFPS_LED_ON;
+ }
+
+ rc = i2c_smbus_write_byte_data(psu->client, CFFPS_SYS_CONFIG_CMD,
+ psu->led_state);
+ if (rc < 0)
+ return;
+
+ led_cdev->brightness = brightness;
+}
+
+static int ibm_cffps_led_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ int rc;
+ struct ibm_cffps *psu = container_of(led_cdev, struct ibm_cffps, led);
+
+ psu->led_state = CFFPS_LED_BLINK;
+
+ if (led_cdev->brightness == LED_OFF)
+ return 0;
+
+ rc = i2c_smbus_write_byte_data(psu->client, CFFPS_SYS_CONFIG_CMD,
+ CFFPS_LED_BLINK);
+ if (rc < 0)
+ return rc;
+
+ *delay_on = CFFPS_BLINK_RATE_MS;
+ *delay_off = CFFPS_BLINK_RATE_MS;
+
+ return 0;
+}
+
+static void ibm_cffps_create_led_class(struct ibm_cffps *psu)
+{
+ int rc;
+ struct i2c_client *client = psu->client;
+ struct device *dev = &client->dev;
+
+ snprintf(psu->led_name, sizeof(psu->led_name), "%s-%02x", client->name,
+ client->addr);
+ psu->led.name = psu->led_name;
+ psu->led.max_brightness = LED_FULL;
+ psu->led.brightness_set = ibm_cffps_led_brightness_set;
+ psu->led.blink_set = ibm_cffps_led_blink_set;
+
+ rc = devm_led_classdev_register(dev, &psu->led);
+ if (rc)
+ dev_warn(dev, "failed to register led class: %d\n", rc);
+}
+
static struct pmbus_driver_info ibm_cffps_info = {
.pages = 1,
.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
@@ -116,10 +343,69 @@ static struct pmbus_driver_info ibm_cffps_info = {
.read_word_data = ibm_cffps_read_word_data,
};
+static struct pmbus_platform_data ibm_cffps_pdata = {
+ .flags = PMBUS_SKIP_STATUS_CHECK,
+};
+
static int ibm_cffps_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- return pmbus_do_probe(client, id, &ibm_cffps_info);
+ int i, rc;
+ struct dentry *debugfs;
+ struct dentry *ibm_cffps_dir;
+ struct ibm_cffps *psu;
+
+ client->dev.platform_data = &ibm_cffps_pdata;
+ rc = pmbus_do_probe(client, id, &ibm_cffps_info);
+ if (rc)
+ return rc;
+
+ /*
+ * Don't fail the probe if there isn't enough memory for leds and
+ * debugfs.
+ */
+ psu = devm_kzalloc(&client->dev, sizeof(*psu), GFP_KERNEL);
+ if (!psu)
+ return 0;
+
+ psu->client = client;
+ mutex_init(&psu->input_history.update_lock);
+ psu->input_history.last_update = jiffies - HZ;
+
+ ibm_cffps_create_led_class(psu);
+
+ /* Don't fail the probe if we can't create debugfs */
+ debugfs = pmbus_get_debugfs_dir(client);
+ if (!debugfs)
+ return 0;
+
+ ibm_cffps_dir = debugfs_create_dir(client->name, debugfs);
+ if (!ibm_cffps_dir)
+ return 0;
+
+ for (i = 0; i < CFFPS_DEBUGFS_NUM_ENTRIES; ++i)
+ psu->debugfs_entries[i] = i;
+
+ debugfs_create_file("input_history", 0444, ibm_cffps_dir,
+ &psu->debugfs_entries[CFFPS_DEBUGFS_INPUT_HISTORY],
+ &ibm_cffps_fops);
+ debugfs_create_file("fru", 0444, ibm_cffps_dir,
+ &psu->debugfs_entries[CFFPS_DEBUGFS_FRU],
+ &ibm_cffps_fops);
+ debugfs_create_file("part_number", 0444, ibm_cffps_dir,
+ &psu->debugfs_entries[CFFPS_DEBUGFS_PN],
+ &ibm_cffps_fops);
+ debugfs_create_file("serial_number", 0444, ibm_cffps_dir,
+ &psu->debugfs_entries[CFFPS_DEBUGFS_SN],
+ &ibm_cffps_fops);
+ debugfs_create_file("ccin", 0444, ibm_cffps_dir,
+ &psu->debugfs_entries[CFFPS_DEBUGFS_CCIN],
+ &ibm_cffps_fops);
+ debugfs_create_file("fw_version", 0444, ibm_cffps_dir,
+ &psu->debugfs_entries[CFFPS_DEBUGFS_FW],
+ &ibm_cffps_fops);
+
+ return 0;
}
static const struct i2c_device_id ibm_cffps_id[] = {
diff --git a/drivers/hwmon/pmbus/ir35221.c b/drivers/hwmon/pmbus/ir35221.c
index 8b906b44484b..977315b0fd90 100644
--- a/drivers/hwmon/pmbus/ir35221.c
+++ b/drivers/hwmon/pmbus/ir35221.c
@@ -25,168 +25,19 @@
#define IR35221_MFR_IOUT_VALLEY 0xcb
#define IR35221_MFR_TEMP_VALLEY 0xcc
-static long ir35221_reg2data(int data, enum pmbus_sensor_classes class)
-{
- s16 exponent;
- s32 mantissa;
- long val;
-
- /* We only modify LINEAR11 formats */
- exponent = ((s16)data) >> 11;
- mantissa = ((s16)((data & 0x7ff) << 5)) >> 5;
-
- val = mantissa * 1000L;
-
- /* scale result to micro-units for power sensors */
- if (class == PSC_POWER)
- val = val * 1000L;
-
- if (exponent >= 0)
- val <<= exponent;
- else
- val >>= -exponent;
-
- return val;
-}
-
-#define MAX_MANTISSA (1023 * 1000)
-#define MIN_MANTISSA (511 * 1000)
-
-static u16 ir35221_data2reg(long val, enum pmbus_sensor_classes class)
-{
- s16 exponent = 0, mantissa;
- bool negative = false;
-
- if (val == 0)
- return 0;
-
- if (val < 0) {
- negative = true;
- val = -val;
- }
-
- /* Power is in uW. Convert to mW before converting. */
- if (class == PSC_POWER)
- val = DIV_ROUND_CLOSEST(val, 1000L);
-
- /* Reduce large mantissa until it fits into 10 bit */
- while (val >= MAX_MANTISSA && exponent < 15) {
- exponent++;
- val >>= 1;
- }
- /* Increase small mantissa to improve precision */
- while (val < MIN_MANTISSA && exponent > -15) {
- exponent--;
- val <<= 1;
- }
-
- /* Convert mantissa from milli-units to units */
- mantissa = DIV_ROUND_CLOSEST(val, 1000);
-
- /* Ensure that resulting number is within range */
- if (mantissa > 0x3ff)
- mantissa = 0x3ff;
-
- /* restore sign */
- if (negative)
- mantissa = -mantissa;
-
- /* Convert to 5 bit exponent, 11 bit mantissa */
- return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800);
-}
-
-static u16 ir35221_scale_result(s16 data, int shift,
- enum pmbus_sensor_classes class)
-{
- long val;
-
- val = ir35221_reg2data(data, class);
-
- if (shift < 0)
- val >>= -shift;
- else
- val <<= shift;
-
- return ir35221_data2reg(val, class);
-}
-
static int ir35221_read_word_data(struct i2c_client *client, int page, int reg)
{
int ret;
switch (reg) {
- case PMBUS_IOUT_OC_FAULT_LIMIT:
- case PMBUS_IOUT_OC_WARN_LIMIT:
- ret = pmbus_read_word_data(client, page, reg);
- if (ret < 0)
- break;
- ret = ir35221_scale_result(ret, 1, PSC_CURRENT_OUT);
- break;
- case PMBUS_VIN_OV_FAULT_LIMIT:
- case PMBUS_VIN_OV_WARN_LIMIT:
- case PMBUS_VIN_UV_WARN_LIMIT:
- ret = pmbus_read_word_data(client, page, reg);
- ret = ir35221_scale_result(ret, -4, PSC_VOLTAGE_IN);
- break;
- case PMBUS_IIN_OC_WARN_LIMIT:
- ret = pmbus_read_word_data(client, page, reg);
- if (ret < 0)
- break;
- ret = ir35221_scale_result(ret, -1, PSC_CURRENT_IN);
- break;
- case PMBUS_READ_VIN:
- ret = pmbus_read_word_data(client, page, PMBUS_READ_VIN);
- if (ret < 0)
- break;
- ret = ir35221_scale_result(ret, -5, PSC_VOLTAGE_IN);
- break;
- case PMBUS_READ_IIN:
- ret = pmbus_read_word_data(client, page, PMBUS_READ_IIN);
- if (ret < 0)
- break;
- if (page == 0)
- ret = ir35221_scale_result(ret, -4, PSC_CURRENT_IN);
- else
- ret = ir35221_scale_result(ret, -5, PSC_CURRENT_IN);
- break;
- case PMBUS_READ_POUT:
- ret = pmbus_read_word_data(client, page, PMBUS_READ_POUT);
- if (ret < 0)
- break;
- ret = ir35221_scale_result(ret, -1, PSC_POWER);
- break;
- case PMBUS_READ_PIN:
- ret = pmbus_read_word_data(client, page, PMBUS_READ_PIN);
- if (ret < 0)
- break;
- ret = ir35221_scale_result(ret, -1, PSC_POWER);
- break;
- case PMBUS_READ_IOUT:
- ret = pmbus_read_word_data(client, page, PMBUS_READ_IOUT);
- if (ret < 0)
- break;
- if (page == 0)
- ret = ir35221_scale_result(ret, -1, PSC_CURRENT_OUT);
- else
- ret = ir35221_scale_result(ret, -2, PSC_CURRENT_OUT);
- break;
case PMBUS_VIRT_READ_VIN_MAX:
ret = pmbus_read_word_data(client, page, IR35221_MFR_VIN_PEAK);
- if (ret < 0)
- break;
- ret = ir35221_scale_result(ret, -5, PSC_VOLTAGE_IN);
break;
case PMBUS_VIRT_READ_VOUT_MAX:
ret = pmbus_read_word_data(client, page, IR35221_MFR_VOUT_PEAK);
break;
case PMBUS_VIRT_READ_IOUT_MAX:
ret = pmbus_read_word_data(client, page, IR35221_MFR_IOUT_PEAK);
- if (ret < 0)
- break;
- if (page == 0)
- ret = ir35221_scale_result(ret, -1, PSC_CURRENT_IN);
- else
- ret = ir35221_scale_result(ret, -2, PSC_CURRENT_IN);
break;
case PMBUS_VIRT_READ_TEMP_MAX:
ret = pmbus_read_word_data(client, page, IR35221_MFR_TEMP_PEAK);
@@ -194,9 +45,6 @@ static int ir35221_read_word_data(struct i2c_client *client, int page, int reg)
case PMBUS_VIRT_READ_VIN_MIN:
ret = pmbus_read_word_data(client, page,
IR35221_MFR_VIN_VALLEY);
- if (ret < 0)
- break;
- ret = ir35221_scale_result(ret, -5, PSC_VOLTAGE_IN);
break;
case PMBUS_VIRT_READ_VOUT_MIN:
ret = pmbus_read_word_data(client, page,
@@ -205,12 +53,6 @@ static int ir35221_read_word_data(struct i2c_client *client, int page, int reg)
case PMBUS_VIRT_READ_IOUT_MIN:
ret = pmbus_read_word_data(client, page,
IR35221_MFR_IOUT_VALLEY);
- if (ret < 0)
- break;
- if (page == 0)
- ret = ir35221_scale_result(ret, -1, PSC_CURRENT_IN);
- else
- ret = ir35221_scale_result(ret, -2, PSC_CURRENT_IN);
break;
case PMBUS_VIRT_READ_TEMP_MIN:
ret = pmbus_read_word_data(client, page,
@@ -224,36 +66,6 @@ static int ir35221_read_word_data(struct i2c_client *client, int page, int reg)
return ret;
}
-static int ir35221_write_word_data(struct i2c_client *client, int page, int reg,
- u16 word)
-{
- int ret;
- u16 val;
-
- switch (reg) {
- case PMBUS_IOUT_OC_FAULT_LIMIT:
- case PMBUS_IOUT_OC_WARN_LIMIT:
- val = ir35221_scale_result(word, -1, PSC_CURRENT_OUT);
- ret = pmbus_write_word_data(client, page, reg, val);
- break;
- case PMBUS_VIN_OV_FAULT_LIMIT:
- case PMBUS_VIN_OV_WARN_LIMIT:
- case PMBUS_VIN_UV_WARN_LIMIT:
- val = ir35221_scale_result(word, 4, PSC_VOLTAGE_IN);
- ret = pmbus_write_word_data(client, page, reg, val);
- break;
- case PMBUS_IIN_OC_WARN_LIMIT:
- val = ir35221_scale_result(word, 1, PSC_CURRENT_IN);
- ret = pmbus_write_word_data(client, page, reg, val);
- break;
- default:
- ret = -ENODATA;
- break;
- }
-
- return ret;
-}
-
static int ir35221_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -292,7 +104,6 @@ static int ir35221_probe(struct i2c_client *client,
if (!info)
return -ENOMEM;
- info->write_word_data = ir35221_write_word_data;
info->read_word_data = ir35221_read_word_data;
info->pages = 2;
diff --git a/drivers/hwmon/pmbus/lm25066.c b/drivers/hwmon/pmbus/lm25066.c
index 10d17fb8f283..53db78753a0d 100644
--- a/drivers/hwmon/pmbus/lm25066.c
+++ b/drivers/hwmon/pmbus/lm25066.c
@@ -1,5 +1,5 @@
/*
- * Hardware monitoring driver for LM25056 / LM25063 / LM25066 / LM5064 / LM5066
+ * Hardware monitoring driver for LM25056 / LM25066 / LM5064 / LM5066
*
* Copyright (c) 2011 Ericsson AB.
* Copyright (c) 2013 Guenter Roeck
@@ -28,7 +28,7 @@
#include <linux/i2c.h>
#include "pmbus.h"
-enum chips { lm25056, lm25063, lm25066, lm5064, lm5066, lm5066i };
+enum chips { lm25056, lm25066, lm5064, lm5066, lm5066i };
#define LM25066_READ_VAUX 0xd0
#define LM25066_MFR_READ_IIN 0xd1
@@ -53,11 +53,6 @@ enum chips { lm25056, lm25063, lm25066, lm5064, lm5066, lm5066i };
#define LM25056_MFR_STS_VAUX_OV_WARN BIT(1)
#define LM25056_MFR_STS_VAUX_UV_WARN BIT(0)
-/* LM25063 only */
-
-#define LM25063_READ_VOUT_MAX 0xe5
-#define LM25063_READ_VOUT_MIN 0xe6
-
struct __coeff {
short m, b, R;
};
@@ -122,36 +117,6 @@ static struct __coeff lm25066_coeff[6][PSC_NUM_CLASSES + 2] = {
.m = 16,
},
},
- [lm25063] = {
- [PSC_VOLTAGE_IN] = {
- .m = 16000,
- .R = -2,
- },
- [PSC_VOLTAGE_OUT] = {
- .m = 16000,
- .R = -2,
- },
- [PSC_CURRENT_IN] = {
- .m = 10000,
- .R = -2,
- },
- [PSC_CURRENT_IN_L] = {
- .m = 10000,
- .R = -2,
- },
- [PSC_POWER] = {
- .m = 5000,
- .R = -3,
- },
- [PSC_POWER_L] = {
- .m = 5000,
- .R = -3,
- },
- [PSC_TEMPERATURE] = {
- .m = 15596,
- .R = -3,
- },
- },
[lm5064] = {
[PSC_VOLTAGE_IN] = {
.m = 4611,
@@ -272,10 +237,6 @@ static int lm25066_read_word_data(struct i2c_client *client, int page, int reg)
/* VIN: 6.14 mV VAUX: 293 uV LSB */
ret = DIV_ROUND_CLOSEST(ret * 293, 6140);
break;
- case lm25063:
- /* VIN: 6.25 mV VAUX: 200.0 uV LSB */
- ret = DIV_ROUND_CLOSEST(ret * 20, 625);
- break;
case lm25066:
/* VIN: 4.54 mV VAUX: 283.2 uV LSB */
ret = DIV_ROUND_CLOSEST(ret * 2832, 45400);
@@ -330,24 +291,6 @@ static int lm25066_read_word_data(struct i2c_client *client, int page, int reg)
return ret;
}
-static int lm25063_read_word_data(struct i2c_client *client, int page, int reg)
-{
- int ret;
-
- switch (reg) {
- case PMBUS_VIRT_READ_VOUT_MAX:
- ret = pmbus_read_word_data(client, 0, LM25063_READ_VOUT_MAX);
- break;
- case PMBUS_VIRT_READ_VOUT_MIN:
- ret = pmbus_read_word_data(client, 0, LM25063_READ_VOUT_MIN);
- break;
- default:
- ret = lm25066_read_word_data(client, page, reg);
- break;
- }
- return ret;
-}
-
static int lm25056_read_word_data(struct i2c_client *client, int page, int reg)
{
int ret;
@@ -502,11 +445,6 @@ static int lm25066_probe(struct i2c_client *client,
info->read_word_data = lm25056_read_word_data;
info->read_byte_data = lm25056_read_byte_data;
data->rlimit = 0x0fff;
- } else if (data->id == lm25063) {
- info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
- | PMBUS_HAVE_POUT;
- info->read_word_data = lm25063_read_word_data;
- data->rlimit = 0xffff;
} else {
info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
info->read_word_data = lm25066_read_word_data;
@@ -543,7 +481,6 @@ static int lm25066_probe(struct i2c_client *client,
static const struct i2c_device_id lm25066_id[] = {
{"lm25056", lm25056},
- {"lm25063", lm25063},
{"lm25066", lm25066},
{"lm5064", lm5064},
{"lm5066", lm5066},
diff --git a/drivers/hwmon/pmbus/max31785.c b/drivers/hwmon/pmbus/max31785.c
index 9313849d5160..c9dc8799b5e1 100644
--- a/drivers/hwmon/pmbus/max31785.c
+++ b/drivers/hwmon/pmbus/max31785.c
@@ -16,12 +16,231 @@
enum max31785_regs {
MFR_REVISION = 0x9b,
+ MFR_FAN_CONFIG = 0xf1,
};
+#define MAX31785 0x3030
+#define MAX31785A 0x3040
+
+#define MFR_FAN_CONFIG_DUAL_TACH BIT(12)
+
#define MAX31785_NR_PAGES 23
+#define MAX31785_NR_FAN_PAGES 6
+
+static int max31785_read_byte_data(struct i2c_client *client, int page,
+ int reg)
+{
+ if (page < MAX31785_NR_PAGES)
+ return -ENODATA;
+
+ switch (reg) {
+ case PMBUS_VOUT_MODE:
+ return -ENOTSUPP;
+ case PMBUS_FAN_CONFIG_12:
+ return pmbus_read_byte_data(client, page - MAX31785_NR_PAGES,
+ reg);
+ }
+
+ return -ENODATA;
+}
+
+static int max31785_write_byte(struct i2c_client *client, int page, u8 value)
+{
+ if (page < MAX31785_NR_PAGES)
+ return -ENODATA;
+
+ return -ENOTSUPP;
+}
+
+static int max31785_read_long_data(struct i2c_client *client, int page,
+ int reg, u32 *data)
+{
+ unsigned char cmdbuf[1];
+ unsigned char rspbuf[4];
+ int rc;
+
+ struct i2c_msg msg[2] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = sizeof(cmdbuf),
+ .buf = cmdbuf,
+ },
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = sizeof(rspbuf),
+ .buf = rspbuf,
+ },
+ };
+
+ cmdbuf[0] = reg;
+
+ rc = pmbus_set_page(client, page);
+ if (rc < 0)
+ return rc;
+
+ rc = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+ if (rc < 0)
+ return rc;
+
+ *data = (rspbuf[0] << (0 * 8)) | (rspbuf[1] << (1 * 8)) |
+ (rspbuf[2] << (2 * 8)) | (rspbuf[3] << (3 * 8));
+
+ return rc;
+}
+
+static int max31785_get_pwm(struct i2c_client *client, int page)
+{
+ int rv;
+
+ rv = pmbus_get_fan_rate_device(client, page, 0, percent);
+ if (rv < 0)
+ return rv;
+ else if (rv >= 0x8000)
+ return 0;
+ else if (rv >= 0x2711)
+ return 0x2710;
+
+ return rv;
+}
+
+static int max31785_get_pwm_mode(struct i2c_client *client, int page)
+{
+ int config;
+ int command;
+
+ config = pmbus_read_byte_data(client, page, PMBUS_FAN_CONFIG_12);
+ if (config < 0)
+ return config;
+
+ command = pmbus_read_word_data(client, page, PMBUS_FAN_COMMAND_1);
+ if (command < 0)
+ return command;
+
+ if (config & PB_FAN_1_RPM)
+ return (command >= 0x8000) ? 3 : 2;
+
+ if (command >= 0x8000)
+ return 3;
+ else if (command >= 0x2711)
+ return 0;
+
+ return 1;
+}
+
+static int max31785_read_word_data(struct i2c_client *client, int page,
+ int reg)
+{
+ u32 val;
+ int rv;
+
+ switch (reg) {
+ case PMBUS_READ_FAN_SPEED_1:
+ if (page < MAX31785_NR_PAGES)
+ return -ENODATA;
+
+ rv = max31785_read_long_data(client, page - MAX31785_NR_PAGES,
+ reg, &val);
+ if (rv < 0)
+ return rv;
+
+ rv = (val >> 16) & 0xffff;
+ break;
+ case PMBUS_FAN_COMMAND_1:
+ /*
+ * PMBUS_FAN_COMMAND_x is probed to judge whether or not to
+ * expose fan control registers.
+ *
+ * Don't expose fan_target attribute for virtual pages.
+ */
+ rv = (page >= MAX31785_NR_PAGES) ? -ENOTSUPP : -ENODATA;
+ break;
+ case PMBUS_VIRT_PWM_1:
+ rv = max31785_get_pwm(client, page);
+ break;
+ case PMBUS_VIRT_PWM_ENABLE_1:
+ rv = max31785_get_pwm_mode(client, page);
+ break;
+ default:
+ rv = -ENODATA;
+ break;
+ }
+
+ return rv;
+}
+
+static inline u32 max31785_scale_pwm(u32 sensor_val)
+{
+ /*
+ * The datasheet describes the accepted value range for manual PWM as
+ * [0, 0x2710], while the hwmon pwmX sysfs interface accepts values in
+ * [0, 255]. The MAX31785 uses DIRECT mode to scale the FAN_COMMAND
+ * registers and in PWM mode the coefficients are m=1, b=0, R=2. The
+ * important observation here is that 0x2710 == 10000 == 100 * 100.
+ *
+ * R=2 (== 10^2 == 100) accounts for scaling the value provided at the
+ * sysfs interface into the required hardware resolution, but it does
+ * not yet yield a value that we can write to the device (this initial
+ * scaling is handled by pmbus_data2reg()). Multiplying by 100 below
+ * translates the parameter value into the percentage units required by
+ * PMBus, and then we scale back by 255 as required by the hwmon pwmX
+ * interface to yield the percentage value at the appropriate
+ * resolution for hardware.
+ */
+ return (sensor_val * 100) / 255;
+}
+
+static int max31785_pwm_enable(struct i2c_client *client, int page,
+ u16 word)
+{
+ int config = 0;
+ int rate;
+
+ switch (word) {
+ case 0:
+ rate = 0x7fff;
+ break;
+ case 1:
+ rate = pmbus_get_fan_rate_cached(client, page, 0, percent);
+ if (rate < 0)
+ return rate;
+ rate = max31785_scale_pwm(rate);
+ break;
+ case 2:
+ config = PB_FAN_1_RPM;
+ rate = pmbus_get_fan_rate_cached(client, page, 0, rpm);
+ if (rate < 0)
+ return rate;
+ break;
+ case 3:
+ rate = 0xffff;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return pmbus_update_fan(client, page, 0, config, PB_FAN_1_RPM, rate);
+}
+
+static int max31785_write_word_data(struct i2c_client *client, int page,
+ int reg, u16 word)
+{
+ switch (reg) {
+ case PMBUS_VIRT_PWM_1:
+ return pmbus_update_fan(client, page, 0, 0, PB_FAN_1_RPM,
+ max31785_scale_pwm(word));
+ case PMBUS_VIRT_PWM_ENABLE_1:
+ return max31785_pwm_enable(client, page, word);
+ default:
+ break;
+ }
+
+ return -ENODATA;
+}
#define MAX31785_FAN_FUNCS \
- (PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12)
+ (PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12 | PMBUS_HAVE_PWM12)
#define MAX31785_TEMP_FUNCS \
(PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP)
@@ -29,14 +248,26 @@ enum max31785_regs {
#define MAX31785_VOUT_FUNCS \
(PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT)
+#define MAX37185_NUM_FAN_PAGES 6
+
static const struct pmbus_driver_info max31785_info = {
.pages = MAX31785_NR_PAGES,
+ .write_word_data = max31785_write_word_data,
+ .read_byte_data = max31785_read_byte_data,
+ .read_word_data = max31785_read_word_data,
+ .write_byte = max31785_write_byte,
+
/* RPM */
.format[PSC_FAN] = direct,
.m[PSC_FAN] = 1,
.b[PSC_FAN] = 0,
.R[PSC_FAN] = 0,
+ /* PWM */
+ .format[PSC_PWM] = direct,
+ .m[PSC_PWM] = 1,
+ .b[PSC_PWM] = 0,
+ .R[PSC_PWM] = 2,
.func[0] = MAX31785_FAN_FUNCS,
.func[1] = MAX31785_FAN_FUNCS,
.func[2] = MAX31785_FAN_FUNCS,
@@ -72,13 +303,46 @@ static const struct pmbus_driver_info max31785_info = {
.func[22] = MAX31785_VOUT_FUNCS,
};
+static int max31785_configure_dual_tach(struct i2c_client *client,
+ struct pmbus_driver_info *info)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < MAX31785_NR_FAN_PAGES; i++) {
+ ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_read_word_data(client, MFR_FAN_CONFIG);
+ if (ret < 0)
+ return ret;
+
+ if (ret & MFR_FAN_CONFIG_DUAL_TACH) {
+ int virtual = MAX31785_NR_PAGES + i;
+
+ info->pages = virtual + 1;
+ info->func[virtual] |= PMBUS_HAVE_FAN12;
+ info->func[virtual] |= PMBUS_PAGE_VIRTUAL;
+ }
+ }
+
+ return 0;
+}
+
static int max31785_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
struct pmbus_driver_info *info;
+ bool dual_tach = false;
s64 ret;
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA))
+ return -ENODEV;
+
info = devm_kzalloc(dev, sizeof(struct pmbus_driver_info), GFP_KERNEL);
if (!info)
return -ENOMEM;
@@ -89,6 +353,25 @@ static int max31785_probe(struct i2c_client *client,
if (ret < 0)
return ret;
+ ret = i2c_smbus_read_word_data(client, MFR_REVISION);
+ if (ret < 0)
+ return ret;
+
+ if (ret == MAX31785A) {
+ dual_tach = true;
+ } else if (ret == MAX31785) {
+ if (!strcmp("max31785a", id->name))
+ dev_warn(dev, "Expected max3175a, found max31785: cannot provide secondary tachometer readings\n");
+ } else {
+ return -ENODEV;
+ }
+
+ if (dual_tach) {
+ ret = max31785_configure_dual_tach(client, info);
+ if (ret < 0)
+ return ret;
+ }
+
return pmbus_do_probe(client, id, info);
}
@@ -100,9 +383,18 @@ static const struct i2c_device_id max31785_id[] = {
MODULE_DEVICE_TABLE(i2c, max31785_id);
+static const struct of_device_id max31785_of_match[] = {
+ { .compatible = "maxim,max31785" },
+ { .compatible = "maxim,max31785a" },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, max31785_of_match);
+
static struct i2c_driver max31785_driver = {
.driver = {
.name = "max31785",
+ .of_match_table = max31785_of_match,
},
.probe = max31785_probe,
.remove = pmbus_do_remove,
diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
index fa613bd209e3..1d24397d36ec 100644
--- a/drivers/hwmon/pmbus/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -190,6 +190,33 @@ enum pmbus_regs {
PMBUS_VIRT_VMON_UV_FAULT_LIMIT,
PMBUS_VIRT_VMON_OV_FAULT_LIMIT,
PMBUS_VIRT_STATUS_VMON,
+
+ /*
+ * RPM and PWM Fan control
+ *
+ * Drivers wanting to expose PWM control must define the behaviour of
+ * PMBUS_VIRT_PWM_[1-4] and PMBUS_VIRT_PWM_ENABLE_[1-4] in the
+ * {read,write}_word_data callback.
+ *
+ * pmbus core provides a default implementation for
+ * PMBUS_VIRT_FAN_TARGET_[1-4].
+ *
+ * TARGET, PWM and PWM_ENABLE members must be defined sequentially;
+ * pmbus core uses the difference between the provided register and
+ * it's _1 counterpart to calculate the FAN/PWM ID.
+ */
+ PMBUS_VIRT_FAN_TARGET_1,
+ PMBUS_VIRT_FAN_TARGET_2,
+ PMBUS_VIRT_FAN_TARGET_3,
+ PMBUS_VIRT_FAN_TARGET_4,
+ PMBUS_VIRT_PWM_1,
+ PMBUS_VIRT_PWM_2,
+ PMBUS_VIRT_PWM_3,
+ PMBUS_VIRT_PWM_4,
+ PMBUS_VIRT_PWM_ENABLE_1,
+ PMBUS_VIRT_PWM_ENABLE_2,
+ PMBUS_VIRT_PWM_ENABLE_3,
+ PMBUS_VIRT_PWM_ENABLE_4,
};
/*
@@ -223,6 +250,8 @@ enum pmbus_regs {
#define PB_FAN_1_RPM BIT(6)
#define PB_FAN_1_INSTALLED BIT(7)
+enum pmbus_fan_mode { percent = 0, rpm };
+
/*
* STATUS_BYTE, STATUS_WORD (lower)
*/
@@ -313,6 +342,7 @@ enum pmbus_sensor_classes {
PSC_POWER,
PSC_TEMPERATURE,
PSC_FAN,
+ PSC_PWM,
PSC_NUM_CLASSES /* Number of power sensor classes */
};
@@ -339,6 +369,10 @@ enum pmbus_sensor_classes {
#define PMBUS_HAVE_STATUS_FAN34 BIT(17)
#define PMBUS_HAVE_VMON BIT(18)
#define PMBUS_HAVE_STATUS_VMON BIT(19)
+#define PMBUS_HAVE_PWM12 BIT(20)
+#define PMBUS_HAVE_PWM34 BIT(21)
+
+#define PMBUS_PAGE_VIRTUAL BIT(31)
enum pmbus_data_format { linear = 0, direct, vid };
enum vrm_version { vr11 = 0, vr12, vr13 };
@@ -421,5 +455,12 @@ int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
int pmbus_do_remove(struct i2c_client *client);
const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client
*client);
+int pmbus_get_fan_rate_device(struct i2c_client *client, int page, int id,
+ enum pmbus_fan_mode mode);
+int pmbus_get_fan_rate_cached(struct i2c_client *client, int page, int id,
+ enum pmbus_fan_mode mode);
+int pmbus_update_fan(struct i2c_client *client, int page, int id,
+ u8 config, u8 mask, u16 command);
+struct dentry *pmbus_get_debugfs_dir(struct i2c_client *client);
#endif /* PMBUS_H */
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index a139940cd991..f7c47d7994e7 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -65,6 +65,7 @@ struct pmbus_sensor {
u16 reg; /* register */
enum pmbus_sensor_classes class; /* sensor class */
bool update; /* runtime sensor update needed */
+ bool convert; /* Whether or not to apply linear/vid/direct */
int data; /* Sensor data.
Negative if there was a read error */
};
@@ -129,6 +130,27 @@ struct pmbus_debugfs_entry {
u8 reg;
};
+static const int pmbus_fan_rpm_mask[] = {
+ PB_FAN_1_RPM,
+ PB_FAN_2_RPM,
+ PB_FAN_1_RPM,
+ PB_FAN_2_RPM,
+};
+
+static const int pmbus_fan_config_registers[] = {
+ PMBUS_FAN_CONFIG_12,
+ PMBUS_FAN_CONFIG_12,
+ PMBUS_FAN_CONFIG_34,
+ PMBUS_FAN_CONFIG_34
+};
+
+static const int pmbus_fan_command_registers[] = {
+ PMBUS_FAN_COMMAND_1,
+ PMBUS_FAN_COMMAND_2,
+ PMBUS_FAN_COMMAND_3,
+ PMBUS_FAN_COMMAND_4,
+};
+
void pmbus_clear_cache(struct i2c_client *client)
{
struct pmbus_data *data = i2c_get_clientdata(client);
@@ -140,18 +162,27 @@ EXPORT_SYMBOL_GPL(pmbus_clear_cache);
int pmbus_set_page(struct i2c_client *client, int page)
{
struct pmbus_data *data = i2c_get_clientdata(client);
- int rv = 0;
- int newpage;
+ int rv;
- if (page >= 0 && page != data->currpage) {
+ if (page < 0 || page == data->currpage)
+ return 0;
+
+ if (!(data->info->func[page] & PMBUS_PAGE_VIRTUAL)) {
rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
- newpage = i2c_smbus_read_byte_data(client, PMBUS_PAGE);
- if (newpage != page)
- rv = -EIO;
- else
- data->currpage = page;
+ if (rv < 0)
+ return rv;
+
+ rv = i2c_smbus_read_byte_data(client, PMBUS_PAGE);
+ if (rv < 0)
+ return rv;
+
+ if (rv != page)
+ return -EIO;
}
- return rv;
+
+ data->currpage = page;
+
+ return 0;
}
EXPORT_SYMBOL_GPL(pmbus_set_page);
@@ -198,6 +229,28 @@ int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg,
}
EXPORT_SYMBOL_GPL(pmbus_write_word_data);
+
+static int pmbus_write_virt_reg(struct i2c_client *client, int page, int reg,
+ u16 word)
+{
+ int bit;
+ int id;
+ int rv;
+
+ switch (reg) {
+ case PMBUS_VIRT_FAN_TARGET_1 ... PMBUS_VIRT_FAN_TARGET_4:
+ id = reg - PMBUS_VIRT_FAN_TARGET_1;
+ bit = pmbus_fan_rpm_mask[id];
+ rv = pmbus_update_fan(client, page, id, bit, bit, word);
+ break;
+ default:
+ rv = -ENXIO;
+ break;
+ }
+
+ return rv;
+}
+
/*
* _pmbus_write_word_data() is similar to pmbus_write_word_data(), but checks if
* a device specific mapping function exists and calls it if necessary.
@@ -214,11 +267,38 @@ static int _pmbus_write_word_data(struct i2c_client *client, int page, int reg,
if (status != -ENODATA)
return status;
}
+
if (reg >= PMBUS_VIRT_BASE)
- return -ENXIO;
+ return pmbus_write_virt_reg(client, page, reg, word);
+
return pmbus_write_word_data(client, page, reg, word);
}
+int pmbus_update_fan(struct i2c_client *client, int page, int id,
+ u8 config, u8 mask, u16 command)
+{
+ int from;
+ int rv;
+ u8 to;
+
+ from = pmbus_read_byte_data(client, page,
+ pmbus_fan_config_registers[id]);
+ if (from < 0)
+ return from;
+
+ to = (from & ~mask) | (config & mask);
+ if (to != from) {
+ rv = pmbus_write_byte_data(client, page,
+ pmbus_fan_config_registers[id], to);
+ if (rv < 0)
+ return rv;
+ }
+
+ return _pmbus_write_word_data(client, page,
+ pmbus_fan_command_registers[id], command);
+}
+EXPORT_SYMBOL_GPL(pmbus_update_fan);
+
int pmbus_read_word_data(struct i2c_client *client, int page, u8 reg)
{
int rv;
@@ -231,6 +311,24 @@ int pmbus_read_word_data(struct i2c_client *client, int page, u8 reg)
}
EXPORT_SYMBOL_GPL(pmbus_read_word_data);
+static int pmbus_read_virt_reg(struct i2c_client *client, int page, int reg)
+{
+ int rv;
+ int id;
+
+ switch (reg) {
+ case PMBUS_VIRT_FAN_TARGET_1 ... PMBUS_VIRT_FAN_TARGET_4:
+ id = reg - PMBUS_VIRT_FAN_TARGET_1;
+ rv = pmbus_get_fan_rate_device(client, page, id, rpm);
+ break;
+ default:
+ rv = -ENXIO;
+ break;
+ }
+
+ return rv;
+}
+
/*
* _pmbus_read_word_data() is similar to pmbus_read_word_data(), but checks if
* a device specific mapping function exists and calls it if necessary.
@@ -246,8 +344,10 @@ static int _pmbus_read_word_data(struct i2c_client *client, int page, int reg)
if (status != -ENODATA)
return status;
}
+
if (reg >= PMBUS_VIRT_BASE)
- return -ENXIO;
+ return pmbus_read_virt_reg(client, page, reg);
+
return pmbus_read_word_data(client, page, reg);
}
@@ -312,6 +412,68 @@ static int _pmbus_read_byte_data(struct i2c_client *client, int page, int reg)
return pmbus_read_byte_data(client, page, reg);
}
+static struct pmbus_sensor *pmbus_find_sensor(struct pmbus_data *data, int page,
+ int reg)
+{
+ struct pmbus_sensor *sensor;
+
+ for (sensor = data->sensors; sensor; sensor = sensor->next) {
+ if (sensor->page == page && sensor->reg == reg)
+ return sensor;
+ }
+
+ return ERR_PTR(-EINVAL);
+}
+
+static int pmbus_get_fan_rate(struct i2c_client *client, int page, int id,
+ enum pmbus_fan_mode mode,
+ bool from_cache)
+{
+ struct pmbus_data *data = i2c_get_clientdata(client);
+ bool want_rpm, have_rpm;
+ struct pmbus_sensor *s;
+ int config;
+ int reg;
+
+ want_rpm = (mode == rpm);
+
+ if (from_cache) {
+ reg = want_rpm ? PMBUS_VIRT_FAN_TARGET_1 : PMBUS_VIRT_PWM_1;
+ s = pmbus_find_sensor(data, page, reg + id);
+ if (IS_ERR(s))
+ return PTR_ERR(s);
+
+ return s->data;
+ }
+
+ config = pmbus_read_byte_data(client, page,
+ pmbus_fan_config_registers[id]);
+ if (config < 0)
+ return config;
+
+ have_rpm = !!(config & pmbus_fan_rpm_mask[id]);
+ if (want_rpm == have_rpm)
+ return pmbus_read_word_data(client, page,
+ pmbus_fan_command_registers[id]);
+
+ /* Can't sensibly map between RPM and PWM, just return zero */
+ return 0;
+}
+
+int pmbus_get_fan_rate_device(struct i2c_client *client, int page, int id,
+ enum pmbus_fan_mode mode)
+{
+ return pmbus_get_fan_rate(client, page, id, mode, false);
+}
+EXPORT_SYMBOL_GPL(pmbus_get_fan_rate_device);
+
+int pmbus_get_fan_rate_cached(struct i2c_client *client, int page, int id,
+ enum pmbus_fan_mode mode)
+{
+ return pmbus_get_fan_rate(client, page, id, mode, true);
+}
+EXPORT_SYMBOL_GPL(pmbus_get_fan_rate_cached);
+
static void pmbus_clear_fault_page(struct i2c_client *client, int page)
{
_pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS);
@@ -513,7 +675,7 @@ static long pmbus_reg2data_direct(struct pmbus_data *data,
/* X = 1/m * (Y * 10^-R - b) */
R = -R;
/* scale result to milli-units for everything but fans */
- if (sensor->class != PSC_FAN) {
+ if (!(sensor->class == PSC_FAN || sensor->class == PSC_PWM)) {
R += 3;
b *= 1000;
}
@@ -568,6 +730,9 @@ static long pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor)
{
long val;
+ if (!sensor->convert)
+ return sensor->data;
+
switch (data->info->format[sensor->class]) {
case direct:
val = pmbus_reg2data_direct(data, sensor);
@@ -672,7 +837,7 @@ static u16 pmbus_data2reg_direct(struct pmbus_data *data,
}
/* Calculate Y = (m * X + b) * 10^R */
- if (sensor->class != PSC_FAN) {
+ if (!(sensor->class == PSC_FAN || sensor->class == PSC_PWM)) {
R -= 3; /* Adjust R and b for data in milli-units */
b *= 1000;
}
@@ -703,6 +868,9 @@ static u16 pmbus_data2reg(struct pmbus_data *data,
{
u16 regval;
+ if (!sensor->convert)
+ return val;
+
switch (data->info->format[sensor->class]) {
case direct:
regval = pmbus_data2reg_direct(data, sensor, val);
@@ -915,7 +1083,8 @@ static struct pmbus_sensor *pmbus_add_sensor(struct pmbus_data *data,
const char *name, const char *type,
int seq, int page, int reg,
enum pmbus_sensor_classes class,
- bool update, bool readonly)
+ bool update, bool readonly,
+ bool convert)
{
struct pmbus_sensor *sensor;
struct device_attribute *a;
@@ -925,12 +1094,18 @@ static struct pmbus_sensor *pmbus_add_sensor(struct pmbus_data *data,
return NULL;
a = &sensor->attribute;
- snprintf(sensor->name, sizeof(sensor->name), "%s%d_%s",
- name, seq, type);
+ if (type)
+ snprintf(sensor->name, sizeof(sensor->name), "%s%d_%s",
+ name, seq, type);
+ else
+ snprintf(sensor->name, sizeof(sensor->name), "%s%d",
+ name, seq);
+
sensor->page = page;
sensor->reg = reg;
sensor->class = class;
sensor->update = update;
+ sensor->convert = convert;
pmbus_dev_attr_init(a, sensor->name,
readonly ? S_IRUGO : S_IRUGO | S_IWUSR,
pmbus_show_sensor, pmbus_set_sensor);
@@ -1029,7 +1204,7 @@ static int pmbus_add_limit_attrs(struct i2c_client *client,
curr = pmbus_add_sensor(data, name, l->attr, index,
page, l->reg, attr->class,
attr->update || l->update,
- false);
+ false, true);
if (!curr)
return -ENOMEM;
if (l->sbit && (info->func[page] & attr->sfunc)) {
@@ -1068,7 +1243,7 @@ static int pmbus_add_sensor_attrs_one(struct i2c_client *client,
return ret;
}
base = pmbus_add_sensor(data, name, "input", index, page, attr->reg,
- attr->class, true, true);
+ attr->class, true, true, true);
if (!base)
return -ENOMEM;
if (attr->sfunc) {
@@ -1592,13 +1767,6 @@ static const int pmbus_fan_registers[] = {
PMBUS_READ_FAN_SPEED_4
};
-static const int pmbus_fan_config_registers[] = {
- PMBUS_FAN_CONFIG_12,
- PMBUS_FAN_CONFIG_12,
- PMBUS_FAN_CONFIG_34,
- PMBUS_FAN_CONFIG_34
-};
-
static const int pmbus_fan_status_registers[] = {
PMBUS_STATUS_FAN_12,
PMBUS_STATUS_FAN_12,
@@ -1621,6 +1789,42 @@ static const u32 pmbus_fan_status_flags[] = {
};
/* Fans */
+
+/* Precondition: FAN_CONFIG_x_y and FAN_COMMAND_x must exist for the fan ID */
+static int pmbus_add_fan_ctrl(struct i2c_client *client,
+ struct pmbus_data *data, int index, int page, int id,
+ u8 config)
+{
+ struct pmbus_sensor *sensor;
+
+ sensor = pmbus_add_sensor(data, "fan", "target", index, page,
+ PMBUS_VIRT_FAN_TARGET_1 + id, PSC_FAN,
+ false, false, true);
+
+ if (!sensor)
+ return -ENOMEM;
+
+ if (!((data->info->func[page] & PMBUS_HAVE_PWM12) ||
+ (data->info->func[page] & PMBUS_HAVE_PWM34)))
+ return 0;
+
+ sensor = pmbus_add_sensor(data, "pwm", NULL, index, page,
+ PMBUS_VIRT_PWM_1 + id, PSC_PWM,
+ false, false, true);
+
+ if (!sensor)
+ return -ENOMEM;
+
+ sensor = pmbus_add_sensor(data, "pwm", "enable", index, page,
+ PMBUS_VIRT_PWM_ENABLE_1 + id, PSC_PWM,
+ true, false, false);
+
+ if (!sensor)
+ return -ENOMEM;
+
+ return 0;
+}
+
static int pmbus_add_fan_attributes(struct i2c_client *client,
struct pmbus_data *data)
{
@@ -1655,9 +1859,18 @@ static int pmbus_add_fan_attributes(struct i2c_client *client,
if (pmbus_add_sensor(data, "fan", "input", index,
page, pmbus_fan_registers[f],
- PSC_FAN, true, true) == NULL)
+ PSC_FAN, true, true, true) == NULL)
return -ENOMEM;
+ /* Fan control */
+ if (pmbus_check_word_register(client, page,
+ pmbus_fan_command_registers[f])) {
+ ret = pmbus_add_fan_ctrl(client, data, index,
+ page, f, regval);
+ if (ret < 0)
+ return ret;
+ }
+
/*
* Each fan status register covers multiple fans,
* so we have to do some magic.
@@ -2168,6 +2381,14 @@ int pmbus_do_remove(struct i2c_client *client)
}
EXPORT_SYMBOL_GPL(pmbus_do_remove);
+struct dentry *pmbus_get_debugfs_dir(struct i2c_client *client)
+{
+ struct pmbus_data *data = i2c_get_clientdata(client);
+
+ return data->debugfs;
+}
+EXPORT_SYMBOL_GPL(pmbus_get_debugfs_dir);
+
static int __init pmbus_core_init(void)
{
pmbus_debugfs_dir = debugfs_create_dir("pmbus", NULL);
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-05 02:42:06 +0300