diff options
Diffstat (limited to 'drivers/hwmon/pmbus')
| -rw-r--r-- | drivers/hwmon/pmbus/pmbus.h | 39 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/pmbus_core.c | 238 |
2 files changed, 259 insertions, 18 deletions
diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h index fa613bd209e3..b54d7604d3ef 100644 --- a/drivers/hwmon/pmbus/pmbus.h +++ b/drivers/hwmon/pmbus/pmbus.h @@ -190,6 +190,33 @@ enum pmbus_regs { PMBUS_VIRT_VMON_UV_FAULT_LIMIT, PMBUS_VIRT_VMON_OV_FAULT_LIMIT, PMBUS_VIRT_STATUS_VMON, + + /* + * RPM and PWM Fan control + * + * Drivers wanting to expose PWM control must define the behaviour of + * PMBUS_VIRT_PWM_[1-4] and PMBUS_VIRT_PWM_ENABLE_[1-4] in the + * {read,write}_word_data callback. + * + * pmbus core provides a default implementation for + * PMBUS_VIRT_FAN_TARGET_[1-4]. + * + * TARGET, PWM and PWM_ENABLE members must be defined sequentially; + * pmbus core uses the difference between the provided register and + * it's _1 counterpart to calculate the FAN/PWM ID. + */ + PMBUS_VIRT_FAN_TARGET_1, + PMBUS_VIRT_FAN_TARGET_2, + PMBUS_VIRT_FAN_TARGET_3, + PMBUS_VIRT_FAN_TARGET_4, + PMBUS_VIRT_PWM_1, + PMBUS_VIRT_PWM_2, + PMBUS_VIRT_PWM_3, + PMBUS_VIRT_PWM_4, + PMBUS_VIRT_PWM_ENABLE_1, + PMBUS_VIRT_PWM_ENABLE_2, + PMBUS_VIRT_PWM_ENABLE_3, + PMBUS_VIRT_PWM_ENABLE_4, }; /* @@ -223,6 +250,8 @@ enum pmbus_regs { #define PB_FAN_1_RPM BIT(6) #define PB_FAN_1_INSTALLED BIT(7) +enum pmbus_fan_mode { percent = 0, rpm }; + /* * STATUS_BYTE, STATUS_WORD (lower) */ @@ -313,6 +342,7 @@ enum pmbus_sensor_classes { PSC_POWER, PSC_TEMPERATURE, PSC_FAN, + PSC_PWM, PSC_NUM_CLASSES /* Number of power sensor classes */ }; @@ -339,6 +369,8 @@ enum pmbus_sensor_classes { #define PMBUS_HAVE_STATUS_FAN34 BIT(17) #define PMBUS_HAVE_VMON BIT(18) #define PMBUS_HAVE_STATUS_VMON BIT(19) +#define PMBUS_HAVE_PWM12 BIT(20) +#define PMBUS_HAVE_PWM34 BIT(21) enum pmbus_data_format { linear = 0, direct, vid }; enum vrm_version { vr11 = 0, vr12, vr13 }; @@ -421,5 +453,10 @@ int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, int pmbus_do_remove(struct i2c_client *client); const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client *client); - +int pmbus_get_fan_rate_device(struct i2c_client *client, int page, int id, + enum pmbus_fan_mode mode); +int pmbus_get_fan_rate_cached(struct i2c_client *client, int page, int id, + enum pmbus_fan_mode mode); +int pmbus_update_fan(struct i2c_client *client, int page, int id, + u8 config, u8 mask, u16 command); #endif /* PMBUS_H */ diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index a139940cd991..fdd33857f117 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -65,6 +65,7 @@ struct pmbus_sensor { u16 reg; /* register */ enum pmbus_sensor_classes class; /* sensor class */ bool update; /* runtime sensor update needed */ + bool convert; /* Whether or not to apply linear/vid/direct */ int data; /* Sensor data. Negative if there was a read error */ }; @@ -129,6 +130,27 @@ struct pmbus_debugfs_entry { u8 reg; }; +static const int pmbus_fan_rpm_mask[] = { + PB_FAN_1_RPM, + PB_FAN_2_RPM, + PB_FAN_1_RPM, + PB_FAN_2_RPM, +}; + +static const int pmbus_fan_config_registers[] = { + PMBUS_FAN_CONFIG_12, + PMBUS_FAN_CONFIG_12, + PMBUS_FAN_CONFIG_34, + PMBUS_FAN_CONFIG_34 +}; + +static const int pmbus_fan_command_registers[] = { + PMBUS_FAN_COMMAND_1, + PMBUS_FAN_COMMAND_2, + PMBUS_FAN_COMMAND_3, + PMBUS_FAN_COMMAND_4, +}; + void pmbus_clear_cache(struct i2c_client *client) { struct pmbus_data *data = i2c_get_clientdata(client); @@ -198,6 +220,28 @@ int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg, } EXPORT_SYMBOL_GPL(pmbus_write_word_data); + +static int pmbus_write_virt_reg(struct i2c_client *client, int page, int reg, + u16 word) +{ + int bit; + int id; + int rv; + + switch (reg) { + case PMBUS_VIRT_FAN_TARGET_1 ... PMBUS_VIRT_FAN_TARGET_4: + id = reg - PMBUS_VIRT_FAN_TARGET_1; + bit = pmbus_fan_rpm_mask[id]; + rv = pmbus_update_fan(client, page, id, bit, bit, word); + break; + default: + rv = -ENXIO; + break; + } + + return rv; +} + /* * _pmbus_write_word_data() is similar to pmbus_write_word_data(), but checks if * a device specific mapping function exists and calls it if necessary. @@ -214,11 +258,38 @@ static int _pmbus_write_word_data(struct i2c_client *client, int page, int reg, if (status != -ENODATA) return status; } + if (reg >= PMBUS_VIRT_BASE) - return -ENXIO; + return pmbus_write_virt_reg(client, page, reg, word); + return pmbus_write_word_data(client, page, reg, word); } +int pmbus_update_fan(struct i2c_client *client, int page, int id, + u8 config, u8 mask, u16 command) +{ + int from; + int rv; + u8 to; + + from = pmbus_read_byte_data(client, page, + pmbus_fan_config_registers[id]); + if (from < 0) + return from; + + to = (from & ~mask) | (config & mask); + if (to != from) { + rv = pmbus_write_byte_data(client, page, + pmbus_fan_config_registers[id], to); + if (rv < 0) + return rv; + } + + return _pmbus_write_word_data(client, page, + pmbus_fan_command_registers[id], command); +} +EXPORT_SYMBOL_GPL(pmbus_update_fan); + int pmbus_read_word_data(struct i2c_client *client, int page, u8 reg) { int rv; @@ -231,6 +302,24 @@ int pmbus_read_word_data(struct i2c_client *client, int page, u8 reg) } EXPORT_SYMBOL_GPL(pmbus_read_word_data); +static int pmbus_read_virt_reg(struct i2c_client *client, int page, int reg) +{ + int rv; + int id; + + switch (reg) { + case PMBUS_VIRT_FAN_TARGET_1 ... PMBUS_VIRT_FAN_TARGET_4: + id = reg - PMBUS_VIRT_FAN_TARGET_1; + rv = pmbus_get_fan_rate_device(client, page, id, rpm); + break; + default: + rv = -ENXIO; + break; + } + + return rv; +} + /* * _pmbus_read_word_data() is similar to pmbus_read_word_data(), but checks if * a device specific mapping function exists and calls it if necessary. @@ -246,8 +335,10 @@ static int _pmbus_read_word_data(struct i2c_client *client, int page, int reg) if (status != -ENODATA) return status; } + if (reg >= PMBUS_VIRT_BASE) - return -ENXIO; + return pmbus_read_virt_reg(client, page, reg); + return pmbus_read_word_data(client, page, reg); } @@ -312,6 +403,68 @@ static int _pmbus_read_byte_data(struct i2c_client *client, int page, int reg) return pmbus_read_byte_data(client, page, reg); } +static struct pmbus_sensor *pmbus_find_sensor(struct pmbus_data *data, int page, + int reg) +{ + struct pmbus_sensor *sensor; + + for (sensor = data->sensors; sensor; sensor = sensor->next) { + if (sensor->page == page && sensor->reg == reg) + return sensor; + } + + return ERR_PTR(-EINVAL); +} + +static int pmbus_get_fan_rate(struct i2c_client *client, int page, int id, + enum pmbus_fan_mode mode, + bool from_cache) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + bool want_rpm, have_rpm; + struct pmbus_sensor *s; + int config; + int reg; + + want_rpm = (mode == rpm); + + if (from_cache) { + reg = want_rpm ? PMBUS_VIRT_FAN_TARGET_1 : PMBUS_VIRT_PWM_1; + s = pmbus_find_sensor(data, page, reg + id); + if (IS_ERR(s)) + return PTR_ERR(s); + + return s->data; + } + + config = pmbus_read_byte_data(client, page, + pmbus_fan_config_registers[id]); + if (config < 0) + return config; + + have_rpm = !!(config & pmbus_fan_rpm_mask[id]); + if (want_rpm == have_rpm) + return pmbus_read_word_data(client, page, + pmbus_fan_command_registers[id]); + + /* Can't sensibly map between RPM and PWM, just return zero */ + return 0; +} + +int pmbus_get_fan_rate_device(struct i2c_client *client, int page, int id, + enum pmbus_fan_mode mode) +{ + return pmbus_get_fan_rate(client, page, id, mode, false); +} +EXPORT_SYMBOL_GPL(pmbus_get_fan_rate_device); + +int pmbus_get_fan_rate_cached(struct i2c_client *client, int page, int id, + enum pmbus_fan_mode mode) +{ + return pmbus_get_fan_rate(client, page, id, mode, true); +} +EXPORT_SYMBOL_GPL(pmbus_get_fan_rate_cached); + static void pmbus_clear_fault_page(struct i2c_client *client, int page) { _pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS); @@ -513,7 +666,7 @@ static long pmbus_reg2data_direct(struct pmbus_data *data, /* X = 1/m * (Y * 10^-R - b) */ R = -R; /* scale result to milli-units for everything but fans */ - if (sensor->class != PSC_FAN) { + if (!(sensor->class == PSC_FAN || sensor->class == PSC_PWM)) { R += 3; b *= 1000; } @@ -568,6 +721,9 @@ static long pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor) { long val; + if (!sensor->convert) + return sensor->data; + switch (data->info->format[sensor->class]) { case direct: val = pmbus_reg2data_direct(data, sensor); @@ -672,7 +828,7 @@ static u16 pmbus_data2reg_direct(struct pmbus_data *data, } /* Calculate Y = (m * X + b) * 10^R */ - if (sensor->class != PSC_FAN) { + if (!(sensor->class == PSC_FAN || sensor->class == PSC_PWM)) { R -= 3; /* Adjust R and b for data in milli-units */ b *= 1000; } @@ -703,6 +859,9 @@ static u16 pmbus_data2reg(struct pmbus_data *data, { u16 regval; + if (!sensor->convert) + return val; + switch (data->info->format[sensor->class]) { case direct: regval = pmbus_data2reg_direct(data, sensor, val); @@ -915,7 +1074,8 @@ static struct pmbus_sensor *pmbus_add_sensor(struct pmbus_data *data, const char *name, const char *type, int seq, int page, int reg, enum pmbus_sensor_classes class, - bool update, bool readonly) + bool update, bool readonly, + bool convert) { struct pmbus_sensor *sensor; struct device_attribute *a; @@ -925,12 +1085,18 @@ static struct pmbus_sensor *pmbus_add_sensor(struct pmbus_data *data, return NULL; a = &sensor->attribute; - snprintf(sensor->name, sizeof(sensor->name), "%s%d_%s", - name, seq, type); + if (type) + snprintf(sensor->name, sizeof(sensor->name), "%s%d_%s", + name, seq, type); + else + snprintf(sensor->name, sizeof(sensor->name), "%s%d", + name, seq); + sensor->page = page; sensor->reg = reg; sensor->class = class; sensor->update = update; + sensor->convert = convert; pmbus_dev_attr_init(a, sensor->name, readonly ? S_IRUGO : S_IRUGO | S_IWUSR, pmbus_show_sensor, pmbus_set_sensor); @@ -1029,7 +1195,7 @@ static int pmbus_add_limit_attrs(struct i2c_client *client, curr = pmbus_add_sensor(data, name, l->attr, index, page, l->reg, attr->class, attr->update || l->update, - false); + false, true); if (!curr) return -ENOMEM; if (l->sbit && (info->func[page] & attr->sfunc)) { @@ -1068,7 +1234,7 @@ static int pmbus_add_sensor_attrs_one(struct i2c_client *client, return ret; } base = pmbus_add_sensor(data, name, "input", index, page, attr->reg, - attr->class, true, true); + attr->class, true, true, true); if (!base) return -ENOMEM; if (attr->sfunc) { @@ -1592,13 +1758,6 @@ static const int pmbus_fan_registers[] = { PMBUS_READ_FAN_SPEED_4 }; -static const int pmbus_fan_config_registers[] = { - PMBUS_FAN_CONFIG_12, - PMBUS_FAN_CONFIG_12, - PMBUS_FAN_CONFIG_34, - PMBUS_FAN_CONFIG_34 -}; - static const int pmbus_fan_status_registers[] = { PMBUS_STATUS_FAN_12, PMBUS_STATUS_FAN_12, @@ -1621,6 +1780,42 @@ static const u32 pmbus_fan_status_flags[] = { }; /* Fans */ + +/* Precondition: FAN_CONFIG_x_y and FAN_COMMAND_x must exist for the fan ID */ +static int pmbus_add_fan_ctrl(struct i2c_client *client, + struct pmbus_data *data, int index, int page, int id, + u8 config) +{ + struct pmbus_sensor *sensor; + + sensor = pmbus_add_sensor(data, "fan", "target", index, page, + PMBUS_VIRT_FAN_TARGET_1 + id, PSC_FAN, + false, false, true); + + if (!sensor) + return -ENOMEM; + + if (!((data->info->func[page] & PMBUS_HAVE_PWM12) || + (data->info->func[page] & PMBUS_HAVE_PWM34))) + return 0; + + sensor = pmbus_add_sensor(data, "pwm", NULL, index, page, + PMBUS_VIRT_PWM_1 + id, PSC_PWM, + false, false, true); + + if (!sensor) + return -ENOMEM; + + sensor = pmbus_add_sensor(data, "pwm", "enable", index, page, + PMBUS_VIRT_PWM_ENABLE_1 + id, PSC_PWM, + true, false, false); + + if (!sensor) + return -ENOMEM; + + return 0; +} + static int pmbus_add_fan_attributes(struct i2c_client *client, struct pmbus_data *data) { @@ -1655,9 +1850,18 @@ static int pmbus_add_fan_attributes(struct i2c_client *client, if (pmbus_add_sensor(data, "fan", "input", index, page, pmbus_fan_registers[f], - PSC_FAN, true, true) == NULL) + PSC_FAN, true, true, true) == NULL) return -ENOMEM; + /* Fan control */ + if (pmbus_check_word_register(client, page, + pmbus_fan_command_registers[f])) { + ret = pmbus_add_fan_ctrl(client, data, index, + page, f, regval); + if (ret < 0) + return ret; + } + /* * Each fan status register covers multiple fans, * so we have to do some magic. |