diff options
Diffstat (limited to 'drivers/gpu/drm/tidss/tidss_dispc.c')
| -rw-r--r-- | drivers/gpu/drm/tidss/tidss_dispc.c | 138 |
1 files changed, 131 insertions, 7 deletions
diff --git a/drivers/gpu/drm/tidss/tidss_dispc.c b/drivers/gpu/drm/tidss/tidss_dispc.c index 9d9dee7abaef..1ad711f8d2a8 100644 --- a/drivers/gpu/drm/tidss/tidss_dispc.c +++ b/drivers/gpu/drm/tidss/tidss_dispc.c @@ -322,6 +322,60 @@ const struct dispc_features dispc_am625_feats = { .vid_order = { 1, 0 }, }; +const struct dispc_features dispc_am62a7_feats = { + /* + * if the code reaches dispc_mode_valid with VP1, + * it should return MODE_BAD. + */ + .max_pclk_khz = { + [DISPC_VP_TIED_OFF] = 0, + [DISPC_VP_DPI] = 165000, + }, + + .scaling = { + .in_width_max_5tap_rgb = 1280, + .in_width_max_3tap_rgb = 2560, + .in_width_max_5tap_yuv = 2560, + .in_width_max_3tap_yuv = 4096, + .upscale_limit = 16, + .downscale_limit_5tap = 4, + .downscale_limit_3tap = 2, + /* + * The max supported pixel inc value is 255. The value + * of pixel inc is calculated like this: 1+(xinc-1)*bpp. + * The maximum bpp of all formats supported by the HW + * is 8. So the maximum supported xinc value is 32, + * because 1+(32-1)*8 < 255 < 1+(33-1)*4. + */ + .xinc_max = 32, + }, + + .subrev = DISPC_AM62A7, + + .common = "common", + .common_regs = tidss_am65x_common_regs, + + .num_vps = 2, + .vp_name = { "vp1", "vp2" }, + .ovr_name = { "ovr1", "ovr2" }, + .vpclk_name = { "vp1", "vp2" }, + /* VP1 of the DSS in AM62A7 SoC is tied off internally */ + .vp_bus_type = { DISPC_VP_TIED_OFF, DISPC_VP_DPI }, + + .vp_feat = { .color = { + .has_ctm = true, + .gamma_size = 256, + .gamma_type = TIDSS_GAMMA_8BIT, + }, + }, + + .num_planes = 2, + /* note: vid is plane_id 0 and vidl1 is plane_id 1 */ + .vid_name = { "vid", "vidl1" }, + .vid_lite = { false, true, }, + .vid_order = { 1, 0 }, +}; + static const u16 *dispc_common_regmap; struct dss_vp_data { @@ -824,6 +878,7 @@ dispc_irq_t dispc_read_and_clear_irqstatus(struct dispc_device *dispc) case DISPC_K2G: return dispc_k2g_read_and_clear_irqstatus(dispc); case DISPC_AM625: + case DISPC_AM62A7: case DISPC_AM65X: case DISPC_J721E: return dispc_k3_read_and_clear_irqstatus(dispc); @@ -840,6 +895,7 @@ void dispc_set_irqenable(struct dispc_device *dispc, dispc_irq_t mask) dispc_k2g_set_irqenable(dispc, mask); break; case DISPC_AM625: + case DISPC_AM62A7: case DISPC_AM65X: case DISPC_J721E: dispc_k3_set_irqenable(dispc, mask); @@ -1331,6 +1387,7 @@ void dispc_ovr_set_plane(struct dispc_device *dispc, u32 hw_plane, x, y, layer); break; case DISPC_AM625: + case DISPC_AM62A7: case DISPC_AM65X: dispc_am65x_ovr_set_plane(dispc, hw_plane, hw_videoport, x, y, layer); @@ -2250,6 +2307,7 @@ static void dispc_plane_init(struct dispc_device *dispc) dispc_k2g_plane_init(dispc); break; case DISPC_AM625: + case DISPC_AM62A7: case DISPC_AM65X: case DISPC_J721E: dispc_k3_plane_init(dispc); @@ -2357,6 +2415,7 @@ static void dispc_vp_write_gamma_table(struct dispc_device *dispc, dispc_k2g_vp_write_gamma_table(dispc, hw_videoport); break; case DISPC_AM625: + case DISPC_AM62A7: case DISPC_AM65X: dispc_am65x_vp_write_gamma_table(dispc, hw_videoport); break; @@ -2702,18 +2761,83 @@ static void dispc_init_errata(struct dispc_device *dispc) } } -static void dispc_softreset(struct dispc_device *dispc) +/* + * K2G display controller does not support soft reset, so we do a basic manual + * reset here: make sure the IRQs are masked and VPs are disabled. + */ +static void dispc_softreset_k2g(struct dispc_device *dispc) +{ + dispc_set_irqenable(dispc, 0); + dispc_read_and_clear_irqstatus(dispc); + + for (unsigned int vp_idx = 0; vp_idx < dispc->feat->num_vps; ++vp_idx) + VP_REG_FLD_MOD(dispc, vp_idx, DISPC_VP_CONTROL, 0, 0, 0); +} + +static int dispc_softreset(struct dispc_device *dispc) { u32 val; - int ret = 0; + int ret; + + if (dispc->feat->subrev == DISPC_K2G) { + dispc_softreset_k2g(dispc); + return 0; + } /* Soft reset */ REG_FLD_MOD(dispc, DSS_SYSCONFIG, 1, 1, 1); /* Wait for reset to complete */ ret = readl_poll_timeout(dispc->base_common + DSS_SYSSTATUS, val, val & 1, 100, 5000); + if (ret) { + dev_err(dispc->dev, "failed to reset dispc\n"); + return ret; + } + + return 0; +} + +static int dispc_init_hw(struct dispc_device *dispc) +{ + struct device *dev = dispc->dev; + int ret; + + ret = pm_runtime_set_active(dev); + if (ret) { + dev_err(dev, "Failed to set DSS PM to active\n"); + return ret; + } + + ret = clk_prepare_enable(dispc->fclk); + if (ret) { + dev_err(dev, "Failed to enable DSS fclk\n"); + goto err_runtime_suspend; + } + + ret = dispc_softreset(dispc); if (ret) - dev_warn(dispc->dev, "failed to reset dispc\n"); + goto err_clk_disable; + + clk_disable_unprepare(dispc->fclk); + ret = pm_runtime_set_suspended(dev); + if (ret) { + dev_err(dev, "Failed to set DSS PM to suspended\n"); + return ret; + } + + return 0; + +err_clk_disable: + clk_disable_unprepare(dispc->fclk); + +err_runtime_suspend: + ret = pm_runtime_set_suspended(dev); + if (ret) { + dev_err(dev, "Failed to set DSS PM to suspended\n"); + return ret; + } + + return ret; } int dispc_init(struct tidss_device *tidss) @@ -2777,10 +2901,6 @@ int dispc_init(struct tidss_device *tidss) return r; } - /* K2G display controller does not support soft reset */ - if (feat->subrev != DISPC_K2G) - dispc_softreset(dispc); - for (i = 0; i < dispc->feat->num_vps; i++) { u32 gamma_size = dispc->feat->vp_feat.color.gamma_size; u32 *gamma_table; @@ -2829,6 +2949,10 @@ int dispc_init(struct tidss_device *tidss) of_property_read_u32(dispc->dev->of_node, "max-memory-bandwidth", &dispc->memory_bandwidth_limit); + r = dispc_init_hw(dispc); + if (r) + return r; + tidss->dispc = dispc; return 0; |