diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_dp.c')
-rw-r--r-- | drivers/gpu/drm/i915/intel_dp.c | 913 |
1 files changed, 478 insertions, 435 deletions
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 2688f6d64bb9..d2a55884ad52 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -91,18 +91,25 @@ static struct intel_dp *intel_attached_dp(struct drm_connector *connector) } static void intel_dp_link_down(struct intel_dp *intel_dp); +static bool _edp_panel_vdd_on(struct intel_dp *intel_dp); +static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync); static int intel_dp_max_link_bw(struct intel_dp *intel_dp) { int max_link_bw = intel_dp->dpcd[DP_MAX_LINK_RATE]; + struct drm_device *dev = intel_dp->attached_connector->base.dev; switch (max_link_bw) { case DP_LINK_BW_1_62: case DP_LINK_BW_2_7: break; case DP_LINK_BW_5_4: /* 1.2 capable displays may advertise higher bw */ - max_link_bw = DP_LINK_BW_2_7; + if ((IS_HASWELL(dev) || INTEL_INFO(dev)->gen >= 8) && + intel_dp->dpcd[DP_DPCD_REV] >= 0x12) + max_link_bw = DP_LINK_BW_5_4; + else + max_link_bw = DP_LINK_BW_2_7; break; default: WARN(1, "invalid max DP link bw val %x, using 1.62Gbps\n", @@ -294,7 +301,7 @@ static u32 _pp_stat_reg(struct intel_dp *intel_dp) return VLV_PIPE_PP_STATUS(vlv_power_sequencer_pipe(intel_dp)); } -static bool ironlake_edp_have_panel_power(struct intel_dp *intel_dp) +static bool edp_have_panel_power(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; @@ -302,12 +309,13 @@ static bool ironlake_edp_have_panel_power(struct intel_dp *intel_dp) return (I915_READ(_pp_stat_reg(intel_dp)) & PP_ON) != 0; } -static bool ironlake_edp_have_panel_vdd(struct intel_dp *intel_dp) +static bool edp_have_panel_vdd(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; - return (I915_READ(_pp_ctrl_reg(intel_dp)) & EDP_FORCE_VDD) != 0; + return !dev_priv->pm.suspended && + (I915_READ(_pp_ctrl_reg(intel_dp)) & EDP_FORCE_VDD) != 0; } static void @@ -319,7 +327,7 @@ intel_dp_check_edp(struct intel_dp *intel_dp) if (!is_edp(intel_dp)) return; - if (!ironlake_edp_have_panel_power(intel_dp) && !ironlake_edp_have_panel_vdd(intel_dp)) { + if (!edp_have_panel_power(intel_dp) && !edp_have_panel_vdd(intel_dp)) { WARN(1, "eDP powered off while attempting aux channel communication.\n"); DRM_DEBUG_KMS("Status 0x%08x Control 0x%08x\n", I915_READ(_pp_stat_reg(intel_dp)), @@ -351,31 +359,46 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq) return status; } -static uint32_t get_aux_clock_divider(struct intel_dp *intel_dp, - int index) +static uint32_t i9xx_get_aux_clock_divider(struct intel_dp *intel_dp, int index) { struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); struct drm_device *dev = intel_dig_port->base.base.dev; - struct drm_i915_private *dev_priv = dev->dev_private; - /* The clock divider is based off the hrawclk, - * and would like to run at 2MHz. So, take the - * hrawclk value and divide by 2 and use that - * - * Note that PCH attached eDP panels should use a 125MHz input - * clock divider. + /* + * The clock divider is based off the hrawclk, and would like to run at + * 2MHz. So, take the hrawclk value and divide by 2 and use that */ - if (IS_VALLEYVIEW(dev)) { - return index ? 0 : 100; - } else if (intel_dig_port->port == PORT_A) { - if (index) - return 0; - if (HAS_DDI(dev)) - return DIV_ROUND_CLOSEST(intel_ddi_get_cdclk_freq(dev_priv), 2000); - else if (IS_GEN6(dev) || IS_GEN7(dev)) + return index ? 0 : intel_hrawclk(dev) / 2; +} + +static uint32_t ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + + if (index) + return 0; + + if (intel_dig_port->port == PORT_A) { + if (IS_GEN6(dev) || IS_GEN7(dev)) return 200; /* SNB & IVB eDP input clock at 400Mhz */ else return 225; /* eDP input clock at 450Mhz */ + } else { + return DIV_ROUND_UP(intel_pch_rawclk(dev), 2); + } +} + +static uint32_t hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + if (intel_dig_port->port == PORT_A) { + if (index) + return 0; + return DIV_ROUND_CLOSEST(intel_ddi_get_cdclk_freq(dev_priv), 2000); } else if (dev_priv->pch_id == INTEL_PCH_LPT_DEVICE_ID_TYPE) { /* Workaround for non-ULT HSW */ switch (index) { @@ -383,13 +406,46 @@ static uint32_t get_aux_clock_divider(struct intel_dp *intel_dp, case 1: return 72; default: return 0; } - } else if (HAS_PCH_SPLIT(dev)) { + } else { return index ? 0 : DIV_ROUND_UP(intel_pch_rawclk(dev), 2); - } else { - return index ? 0 :intel_hrawclk(dev) / 2; } } +static uint32_t vlv_get_aux_clock_divider(struct intel_dp *intel_dp, int index) +{ + return index ? 0 : 100; +} + +static uint32_t i9xx_get_aux_send_ctl(struct intel_dp *intel_dp, + bool has_aux_irq, + int send_bytes, + uint32_t aux_clock_divider) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + uint32_t precharge, timeout; + + if (IS_GEN6(dev)) + precharge = 3; + else + precharge = 5; + + if (IS_BROADWELL(dev) && intel_dp->aux_ch_ctl_reg == DPA_AUX_CH_CTL) + timeout = DP_AUX_CH_CTL_TIME_OUT_600us; + else + timeout = DP_AUX_CH_CTL_TIME_OUT_400us; + + return DP_AUX_CH_CTL_SEND_BUSY | + DP_AUX_CH_CTL_DONE | + (has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + timeout | + DP_AUX_CH_CTL_RECEIVE_ERROR | + (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | + (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | + (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT); +} + static int intel_dp_aux_ch(struct intel_dp *intel_dp, uint8_t *send, int send_bytes, @@ -403,9 +459,11 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, uint32_t aux_clock_divider; int i, ret, recv_bytes; uint32_t status; - int try, precharge, clock = 0; + int try, clock = 0; bool has_aux_irq = HAS_AUX_IRQ(dev); - uint32_t timeout; + bool vdd; + + vdd = _edp_panel_vdd_on(intel_dp); /* dp aux is extremely sensitive to irq latency, hence request the * lowest possible wakeup latency and so prevent the cpu from going into @@ -415,16 +473,6 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, intel_dp_check_edp(intel_dp); - if (IS_GEN6(dev)) - precharge = 3; - else - precharge = 5; - - if (IS_BROADWELL(dev) && ch_ctl == DPA_AUX_CH_CTL) - timeout = DP_AUX_CH_CTL_TIME_OUT_600us; - else - timeout = DP_AUX_CH_CTL_TIME_OUT_400us; - intel_aux_display_runtime_get(dev_priv); /* Try to wait for any previous AUX channel activity */ @@ -448,7 +496,12 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, goto out; } - while ((aux_clock_divider = get_aux_clock_divider(intel_dp, clock++))) { + while ((aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, clock++))) { + u32 send_ctl = intel_dp->get_aux_send_ctl(intel_dp, + has_aux_irq, + send_bytes, + aux_clock_divider); + /* Must try at least 3 times according to DP spec */ for (try = 0; try < 5; try++) { /* Load the send data into the aux channel data registers */ @@ -457,16 +510,7 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, pack_aux(send + i, send_bytes - i)); /* Send the command and wait for it to complete */ - I915_WRITE(ch_ctl, - DP_AUX_CH_CTL_SEND_BUSY | - (has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) | - timeout | - (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | - (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | - (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) | - DP_AUX_CH_CTL_DONE | - DP_AUX_CH_CTL_TIME_OUT_ERROR | - DP_AUX_CH_CTL_RECEIVE_ERROR); + I915_WRITE(ch_ctl, send_ctl); status = intel_dp_aux_wait_done(intel_dp, has_aux_irq); @@ -525,246 +569,141 @@ out: pm_qos_update_request(&dev_priv->pm_qos, PM_QOS_DEFAULT_VALUE); intel_aux_display_runtime_put(dev_priv); + if (vdd) + edp_panel_vdd_off(intel_dp, false); + return ret; } -/* Write data to the aux channel in native mode */ -static int -intel_dp_aux_native_write(struct intel_dp *intel_dp, - uint16_t address, uint8_t *send, int send_bytes) +#define BARE_ADDRESS_SIZE 3 +#define HEADER_SIZE (BARE_ADDRESS_SIZE + 1) +static ssize_t +intel_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg) { + struct intel_dp *intel_dp = container_of(aux, struct intel_dp, aux); + uint8_t txbuf[20], rxbuf[20]; + size_t txsize, rxsize; int ret; - uint8_t msg[20]; - int msg_bytes; - uint8_t ack; - int retry; - if (WARN_ON(send_bytes > 16)) - return -E2BIG; + txbuf[0] = msg->request << 4; + txbuf[1] = msg->address >> 8; + txbuf[2] = msg->address & 0xff; + txbuf[3] = msg->size - 1; - intel_dp_check_edp(intel_dp); - msg[0] = DP_AUX_NATIVE_WRITE << 4; - msg[1] = address >> 8; - msg[2] = address & 0xff; - msg[3] = send_bytes - 1; - memcpy(&msg[4], send, send_bytes); - msg_bytes = send_bytes + 4; - for (retry = 0; retry < 7; retry++) { - ret = intel_dp_aux_ch(intel_dp, msg, msg_bytes, &ack, 1); - if (ret < 0) - return ret; - ack >>= 4; - if ((ack & DP_AUX_NATIVE_REPLY_MASK) == DP_AUX_NATIVE_REPLY_ACK) - return send_bytes; - else if ((ack & DP_AUX_NATIVE_REPLY_MASK) == DP_AUX_NATIVE_REPLY_DEFER) - usleep_range(400, 500); - else - return -EIO; - } + switch (msg->request & ~DP_AUX_I2C_MOT) { + case DP_AUX_NATIVE_WRITE: + case DP_AUX_I2C_WRITE: + txsize = msg->size ? HEADER_SIZE + msg->size : BARE_ADDRESS_SIZE; + rxsize = 1; - DRM_ERROR("too many retries, giving up\n"); - return -EIO; -} + if (WARN_ON(txsize > 20)) + return -E2BIG; -/* Write a single byte to the aux channel in native mode */ -static int -intel_dp_aux_native_write_1(struct intel_dp *intel_dp, - uint16_t address, uint8_t byte) -{ - return intel_dp_aux_native_write(intel_dp, address, &byte, 1); -} + memcpy(txbuf + HEADER_SIZE, msg->buffer, msg->size); -/* read bytes from a native aux channel */ -static int -intel_dp_aux_native_read(struct intel_dp *intel_dp, - uint16_t address, uint8_t *recv, int recv_bytes) -{ - uint8_t msg[4]; - int msg_bytes; - uint8_t reply[20]; - int reply_bytes; - uint8_t ack; - int ret; - int retry; + ret = intel_dp_aux_ch(intel_dp, txbuf, txsize, rxbuf, rxsize); + if (ret > 0) { + msg->reply = rxbuf[0] >> 4; + + /* Return payload size. */ + ret = msg->size; + } + break; - if (WARN_ON(recv_bytes > 19)) - return -E2BIG; + case DP_AUX_NATIVE_READ: + case DP_AUX_I2C_READ: + txsize = msg->size ? HEADER_SIZE : BARE_ADDRESS_SIZE; + rxsize = msg->size + 1; - intel_dp_check_edp(intel_dp); - msg[0] = DP_AUX_NATIVE_READ << 4; - msg[1] = address >> 8; - msg[2] = address & 0xff; - msg[3] = recv_bytes - 1; - - msg_bytes = 4; - reply_bytes = recv_bytes + 1; - - for (retry = 0; retry < 7; retry++) { - ret = intel_dp_aux_ch(intel_dp, msg, msg_bytes, - reply, reply_bytes); - if (ret == 0) - return -EPROTO; - if (ret < 0) - return ret; - ack = reply[0] >> 4; - if ((ack & DP_AUX_NATIVE_REPLY_MASK) == DP_AUX_NATIVE_REPLY_ACK) { - memcpy(recv, reply + 1, ret - 1); - return ret - 1; + if (WARN_ON(rxsize > 20)) + return -E2BIG; + + ret = intel_dp_aux_ch(intel_dp, txbuf, txsize, rxbuf, rxsize); + if (ret > 0) { + msg->reply = rxbuf[0] >> 4; + /* + * Assume happy day, and copy the data. The caller is + * expected to check msg->reply before touching it. + * + * Return payload size. + */ + ret--; + memcpy(msg->buffer, rxbuf + 1, ret); } - else if ((ack & DP_AUX_NATIVE_REPLY_MASK) == DP_AUX_NATIVE_REPLY_DEFER) - usleep_range(400, 500); - else - return -EIO; + break; + + default: + ret = -EINVAL; + break; } - DRM_ERROR("too many retries, giving up\n"); - return -EIO; + return ret; } -static int -intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode, - uint8_t write_byte, uint8_t *read_byte) -{ - struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; - struct intel_dp *intel_dp = container_of(adapter, - struct intel_dp, - adapter); - uint16_t address = algo_data->address; - uint8_t msg[5]; - uint8_t reply[2]; - unsigned retry; - int msg_bytes; - int reply_bytes; +static void +intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + enum port port = intel_dig_port->port; + const char *name = NULL; int ret; - ironlake_edp_panel_vdd_on(intel_dp); - intel_dp_check_edp(intel_dp); - /* Set up the command byte */ - if (mode & MODE_I2C_READ) - msg[0] = DP_AUX_I2C_READ << 4; - else - msg[0] = DP_AUX_I2C_WRITE << 4; - - if (!(mode & MODE_I2C_STOP)) - msg[0] |= DP_AUX_I2C_MOT << 4; - - msg[1] = address >> 8; - msg[2] = address; - - switch (mode) { - case MODE_I2C_WRITE: - msg[3] = 0; - msg[4] = write_byte; - msg_bytes = 5; - reply_bytes = 1; + switch (port) { + case PORT_A: + intel_dp->aux_ch_ctl_reg = DPA_AUX_CH_CTL; + name = "DPDDC-A"; + break; + case PORT_B: + intel_dp->aux_ch_ctl_reg = PCH_DPB_AUX_CH_CTL; + name = "DPDDC-B"; + break; + case PORT_C: + intel_dp->aux_ch_ctl_reg = PCH_DPC_AUX_CH_CTL; + name = "DPDDC-C"; break; - case MODE_I2C_READ: - msg[3] = 0; - msg_bytes = 4; - reply_bytes = 2; + case PORT_D: + intel_dp->aux_ch_ctl_reg = PCH_DPD_AUX_CH_CTL; + name = "DPDDC-D"; break; default: - msg_bytes = 3; - reply_bytes = 1; - break; + BUG(); } - /* - * DP1.2 sections 2.7.7.1.5.6.1 and 2.7.7.1.6.6.1: A DP Source device is - * required to retry at least seven times upon receiving AUX_DEFER - * before giving up the AUX transaction. - */ - for (retry = 0; retry < 7; retry++) { - ret = intel_dp_aux_ch(intel_dp, - msg, msg_bytes, - reply, reply_bytes); - if (ret < 0) { - DRM_DEBUG_KMS("aux_ch failed %d\n", ret); - goto out; - } + if (!HAS_DDI(dev)) + intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10; - switch ((reply[0] >> 4) & DP_AUX_NATIVE_REPLY_MASK) { - case DP_AUX_NATIVE_REPLY_ACK: - /* I2C-over-AUX Reply field is only valid - * when paired with AUX ACK. - */ - break; - case DP_AUX_NATIVE_REPLY_NACK: - DRM_DEBUG_KMS("aux_ch native nack\n"); - ret = -EREMOTEIO; - goto out; - case DP_AUX_NATIVE_REPLY_DEFER: - /* - * For now, just give more slack to branch devices. We - * could check the DPCD for I2C bit rate capabilities, - * and if available, adjust the interval. We could also - * be more careful with DP-to-Legacy adapters where a - * long legacy cable may force very low I2C bit rates. - */ - if (intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & - DP_DWN_STRM_PORT_PRESENT) - usleep_range(500, 600); - else - usleep_range(300, 400); - continue; - default: - DRM_ERROR("aux_ch invalid native reply 0x%02x\n", - reply[0]); - ret = -EREMOTEIO; - goto out; - } + intel_dp->aux.name = name; + intel_dp->aux.dev = dev->dev; + intel_dp->aux.transfer = intel_dp_aux_transfer; - switch ((reply[0] >> 4) & DP_AUX_I2C_REPLY_MASK) { - case DP_AUX_I2C_REPLY_ACK: - if (mode == MODE_I2C_READ) { - *read_byte = reply[1]; - } - ret = reply_bytes - 1; - goto out; - case DP_AUX_I2C_REPLY_NACK: - DRM_DEBUG_KMS("aux_i2c nack\n"); - ret = -EREMOTEIO; - goto out; - case DP_AUX_I2C_REPLY_DEFER: - DRM_DEBUG_KMS("aux_i2c defer\n"); - udelay(100); - break; - default: - DRM_ERROR("aux_i2c invalid reply 0x%02x\n", reply[0]); - ret = -EREMOTEIO; - goto out; - } - } + DRM_DEBUG_KMS("registering %s bus for %s\n", name, + connector->base.kdev->kobj.name); - DRM_ERROR("too many retries, giving up\n"); - ret = -EREMOTEIO; + ret = drm_dp_aux_register_i2c_bus(&intel_dp->aux); + if (ret < 0) { + DRM_ERROR("drm_dp_aux_register_i2c_bus() for %s failed (%d)\n", + name, ret); + return; + } -out: - ironlake_edp_panel_vdd_off(intel_dp, false); - return ret; + ret = sysfs_create_link(&connector->base.kdev->kobj, + &intel_dp->aux.ddc.dev.kobj, + intel_dp->aux.ddc.dev.kobj.name); + if (ret < 0) { + DRM_ERROR("sysfs_create_link() for %s failed (%d)\n", name, ret); + drm_dp_aux_unregister_i2c_bus(&intel_dp->aux); + } } -static int -intel_dp_i2c_init(struct intel_dp *intel_dp, - struct intel_connector *intel_connector, const char *name) +static void +intel_dp_connector_unregister(struct intel_connector *intel_connector) { - int ret; - - DRM_DEBUG_KMS("i2c_init %s\n", name); - intel_dp->algo.running = false; - intel_dp->algo.address = 0; - intel_dp->algo.aux_ch = intel_dp_i2c_aux_ch; - - memset(&intel_dp->adapter, '\0', sizeof(intel_dp->adapter)); - intel_dp->adapter.owner = THIS_MODULE; - intel_dp->adapter.class = I2C_CLASS_DDC; - strncpy(intel_dp->adapter.name, name, sizeof(intel_dp->adapter.name) - 1); - intel_dp->adapter.name[sizeof(intel_dp->adapter.name) - 1] = '\0'; - intel_dp->adapter.algo_data = &intel_dp->algo; - intel_dp->adapter.dev.parent = intel_connector->base.kdev; + struct intel_dp *intel_dp = intel_attached_dp(&intel_connector->base); - ret = i2c_dp_aux_add_bus(&intel_dp->adapter); - return ret; + sysfs_remove_link(&intel_connector->base.kdev->kobj, + intel_dp->aux.ddc.dev.kobj.name); + intel_connector_unregister(intel_connector); } static void @@ -812,9 +751,10 @@ intel_dp_compute_config(struct intel_encoder *encoder, struct intel_connector *intel_connector = intel_dp->attached_connector; int lane_count, clock; int max_lane_count = drm_dp_max_lane_count(intel_dp->dpcd); - int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0; + /* Conveniently, the link BW constants become indices with a shift...*/ + int max_clock = intel_dp_max_link_bw(intel_dp) >> 3; int bpp, mode_rate; - static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 }; + static int bws[] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7, DP_LINK_BW_5_4 }; int link_avail, link_clock; if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev) && port != PORT_A) @@ -855,8 +795,8 @@ intel_dp_compute_config(struct intel_encoder *encoder, mode_rate = intel_dp_link_required(adjusted_mode->crtc_clock, bpp); - for (clock = 0; clock <= max_clock; clock++) { - for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) { + for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) { + for (clock = 0; clock <= max_clock; clock++) { link_clock = drm_dp_bw_code_to_link_rate(bws[clock]); link_avail = intel_dp_max_data_rate(link_clock, lane_count); @@ -1015,16 +955,16 @@ static void intel_dp_mode_set(struct intel_encoder *encoder) ironlake_set_pll_cpu_edp(intel_dp); } -#define IDLE_ON_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) -#define IDLE_ON_VALUE (PP_ON | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_ON_IDLE) +#define IDLE_ON_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) +#define IDLE_ON_VALUE (PP_ON | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_ON_IDLE) -#define IDLE_OFF_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) -#define IDLE_OFF_VALUE (0 | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE) +#define IDLE_OFF_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | 0) +#define IDLE_OFF_VALUE (0 | PP_SEQUENCE_NONE | 0 | 0) -#define IDLE_CYCLE_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK) -#define IDLE_CYCLE_VALUE (0 | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE) +#define IDLE_CYCLE_MASK (PP_ON | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK) +#define IDLE_CYCLE_VALUE (0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE) -static void ironlake_wait_panel_status(struct intel_dp *intel_dp, +static void wait_panel_status(struct intel_dp *intel_dp, u32 mask, u32 value) { @@ -1049,24 +989,41 @@ static void ironlake_wait_panel_status(struct intel_dp *intel_dp, DRM_DEBUG_KMS("Wait complete\n"); } -static void ironlake_wait_panel_on(struct intel_dp *intel_dp) +static void wait_panel_on(struct intel_dp *intel_dp) { DRM_DEBUG_KMS("Wait for panel power on\n"); - ironlake_wait_panel_status(intel_dp, IDLE_ON_MASK, IDLE_ON_VALUE); + wait_panel_status(intel_dp, IDLE_ON_MASK, IDLE_ON_VALUE); } -static void ironlake_wait_panel_off(struct intel_dp *intel_dp) +static void wait_panel_off(struct intel_dp *intel_dp) { DRM_DEBUG_KMS("Wait for panel power off time\n"); - ironlake_wait_panel_status(intel_dp, IDLE_OFF_MASK, IDLE_OFF_VALUE); + wait_panel_status(intel_dp, IDLE_OFF_MASK, IDLE_OFF_VALUE); } -static void ironlake_wait_panel_power_cycle(struct intel_dp *intel_dp) +static void wait_panel_power_cycle(struct intel_dp *intel_dp) { DRM_DEBUG_KMS("Wait for panel power cycle\n"); - ironlake_wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE); + + /* When we disable the VDD override bit last we have to do the manual + * wait. */ + wait_remaining_ms_from_jiffies(intel_dp->last_power_cycle, + intel_dp->panel_power_cycle_delay); + + wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE); +} + +static void wait_backlight_on(struct intel_dp *intel_dp) +{ + wait_remaining_ms_from_jiffies(intel_dp->last_power_on, + intel_dp->backlight_on_delay); } +static void edp_wait_backlight_off(struct intel_dp *intel_dp) +{ + wait_remaining_ms_from_jiffies(intel_dp->last_backlight_off, + intel_dp->backlight_off_delay); +} /* Read the current pp_control value, unlocking the register if it * is locked @@ -1084,30 +1041,28 @@ static u32 ironlake_get_pp_control(struct intel_dp *intel_dp) return control; } -void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp) +static bool _edp_panel_vdd_on(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; u32 pp; u32 pp_stat_reg, pp_ctrl_reg; + bool need_to_disable = !intel_dp->want_panel_vdd; if (!is_edp(intel_dp)) - return; - - WARN(intel_dp->want_panel_vdd, - "eDP VDD already requested on\n"); + return false; intel_dp->want_panel_vdd = true; - if (ironlake_edp_have_panel_vdd(intel_dp)) - return; + if (edp_have_panel_vdd(intel_dp)) + return need_to_disable; intel_runtime_pm_get(dev_priv); DRM_DEBUG_KMS("Turning eDP VDD on\n"); - if (!ironlake_edp_have_panel_power(intel_dp)) - ironlake_wait_panel_power_cycle(intel_dp); + if (!edp_have_panel_power(intel_dp)) + wait_panel_power_cycle(intel_dp); pp = ironlake_get_pp_control(intel_dp); pp |= EDP_FORCE_VDD; @@ -1122,13 +1077,24 @@ void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp) /* * If the panel wasn't on, delay before accessing aux channel */ - if (!ironlake_edp_have_panel_power(intel_dp)) { + if (!edp_have_panel_power(intel_dp)) { DRM_DEBUG_KMS("eDP was not running\n"); msleep(intel_dp->panel_power_up_delay); } + + return need_to_disable; +} + +void intel_edp_panel_vdd_on(struct intel_dp *intel_dp) +{ + if (is_edp(intel_dp)) { + bool vdd = _edp_panel_vdd_on(intel_dp); + + WARN(!vdd, "eDP VDD already requested on\n"); + } } -static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp) +static void edp_panel_vdd_off_sync(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; @@ -1137,7 +1103,7 @@ static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp) WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); - if (!intel_dp->want_panel_vdd && ironlake_edp_have_panel_vdd(intel_dp)) { + if (!intel_dp->want_panel_vdd && edp_have_panel_vdd(intel_dp)) { DRM_DEBUG_KMS("Turning eDP VDD off\n"); pp = ironlake_get_pp_control(intel_dp); @@ -1154,24 +1120,24 @@ static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp) I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg)); if ((pp & POWER_TARGET_ON) == 0) - msleep(intel_dp->panel_power_cycle_delay); + intel_dp->last_power_cycle = jiffies; intel_runtime_pm_put(dev_priv); } } -static void ironlake_panel_vdd_work(struct work_struct *__work) +static void edp_panel_vdd_work(struct work_struct *__work) { struct intel_dp *intel_dp = container_of(to_delayed_work(__work), struct intel_dp, panel_vdd_work); struct drm_device *dev = intel_dp_to_dev(intel_dp); mutex_lock(&dev->mode_config.mutex); - ironlake_panel_vdd_off_sync(intel_dp); + edp_panel_vdd_off_sync(intel_dp); mutex_unlock(&dev->mode_config.mutex); } -void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) +static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) { if (!is_edp(intel_dp)) return; @@ -1181,7 +1147,7 @@ void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) intel_dp->want_panel_vdd = false; if (sync) { - ironlake_panel_vdd_off_sync(intel_dp); + edp_panel_vdd_off_sync(intel_dp); } else { /* * Queue the timer to fire a long @@ -1193,7 +1159,7 @@ void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) } } -void ironlake_edp_panel_on(struct intel_dp *intel_dp) +void intel_edp_panel_on(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; @@ -1205,12 +1171,12 @@ void ironlake_edp_panel_on(struct intel_dp *intel_dp) DRM_DEBUG_KMS("Turn eDP power on\n"); - if (ironlake_edp_have_panel_power(intel_dp)) { + if (edp_have_panel_power(intel_dp)) { DRM_DEBUG_KMS("eDP power already on\n"); return; } - ironlake_wait_panel_power_cycle(intel_dp); + wait_panel_power_cycle(intel_dp); pp_ctrl_reg = _pp_ctrl_reg(intel_dp); pp = ironlake_get_pp_control(intel_dp); @@ -1228,7 +1194,8 @@ void ironlake_edp_panel_on(struct intel_dp *intel_dp) I915_WRITE(pp_ctrl_reg, pp); POSTING_READ(pp_ctrl_reg); - ironlake_wait_panel_on(intel_dp); + wait_panel_on(intel_dp); + intel_dp->last_power_on = jiffies; if (IS_GEN5(dev)) { pp |= PANEL_POWER_RESET; /* restore panel reset bit */ @@ -1237,7 +1204,7 @@ void ironlake_edp_panel_on(struct intel_dp *intel_dp) } } -void ironlake_edp_panel_off(struct intel_dp *intel_dp) +void intel_edp_panel_off(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; @@ -1249,27 +1216,31 @@ void ironlake_edp_panel_off(struct intel_dp *intel_dp) DRM_DEBUG_KMS("Turn eDP power off\n"); + edp_wait_backlight_off(intel_dp); + WARN(!intel_dp->want_panel_vdd, "Need VDD to turn off panel\n"); pp = ironlake_get_pp_control(intel_dp); /* We need to switch off panel power _and_ force vdd, for otherwise some * panels get very unhappy and cease to work. */ - pp &= ~(POWER_TARGET_ON | EDP_FORCE_VDD | PANEL_POWER_RESET | EDP_BLC_ENABLE); + pp &= ~(POWER_TARGET_ON | PANEL_POWER_RESET | EDP_FORCE_VDD | + EDP_BLC_ENABLE); pp_ctrl_reg = _pp_ctrl_reg(intel_dp); + intel_dp->want_panel_vdd = false; + I915_WRITE(pp_ctrl_reg, pp); POSTING_READ(pp_ctrl_reg); - intel_dp->want_panel_vdd = false; - - ironlake_wait_panel_off(intel_dp); + intel_dp->last_power_cycle = jiffies; + wait_panel_off(intel_dp); /* We got a reference when we enabled the VDD. */ intel_runtime_pm_put(dev_priv); } -void ironlake_edp_backlight_on(struct intel_dp *intel_dp) +void intel_edp_backlight_on(struct intel_dp *intel_dp) { struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); struct drm_device *dev = intel_dig_port->base.base.dev; @@ -1287,7 +1258,7 @@ void ironlake_edp_backlight_on(struct intel_dp *intel_dp) * link. So delay a bit to make sure the image is solid before * allowing it to appear. */ - msleep(intel_dp->backlight_on_delay); + wait_backlight_on(intel_dp); pp = ironlake_get_pp_control(intel_dp); pp |= EDP_BLC_ENABLE; @@ -1299,7 +1270,7 @@ void ironlake_edp_backlight_on(struct intel_dp *intel_dp) intel_panel_enable_backlight(intel_dp->attached_connector); } -void ironlake_edp_backlight_off(struct intel_dp *intel_dp) +void intel_edp_backlight_off(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; @@ -1319,7 +1290,7 @@ void ironlake_edp_backlight_off(struct intel_dp *intel_dp) I915_WRITE(pp_ctrl_reg, pp); POSTING_READ(pp_ctrl_reg); - msleep(intel_dp->backlight_off_delay); + intel_dp->last_backlight_off = jiffies; } static void ironlake_edp_pll_on(struct intel_dp *intel_dp) @@ -1383,8 +1354,8 @@ void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode) return; if (mode != DRM_MODE_DPMS_ON) { - ret = intel_dp_aux_native_write_1(intel_dp, DP_SET_POWER, - DP_SET_POWER_D3); + ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, + DP_SET_POWER_D3); if (ret != 1) DRM_DEBUG_DRIVER("failed to write sink power state\n"); } else { @@ -1393,9 +1364,8 @@ void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode) * time to wake up. */ for (i = 0; i < 3; i++) { - ret = intel_dp_aux_native_write_1(intel_dp, - DP_SET_POWER, - DP_SET_POWER_D0); + ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, + DP_SET_POWER_D0); if (ret == 1) break; msleep(1); @@ -1410,7 +1380,14 @@ static bool intel_dp_get_hw_state(struct intel_encoder *encoder, enum port port = dp_to_dig_port(intel_dp)->port; struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - u32 tmp = I915_READ(intel_dp->output_reg); + enum intel_display_power_domain power_domain; + u32 tmp; + + power_domain = intel_display_port_power_domain(encoder); + if (!intel_display_power_enabled(dev_priv, power_domain)) + return false; + + tmp = I915_READ(intel_dp->output_reg); if (!(tmp & DP_PORT_EN)) return false; @@ -1604,19 +1581,19 @@ static void intel_edp_psr_enable_sink(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; - uint32_t aux_clock_divider = get_aux_clock_divider(intel_dp, 0); + uint32_t aux_clock_divider; int precharge = 0x3; int msg_size = 5; /* Header(4) + Message(1) */ + aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0); + /* Enable PSR in sink */ if (intel_dp->psr_dpcd[1] & DP_PSR_NO_TRAIN_ON_EXIT) - intel_dp_aux_native_write_1(intel_dp, DP_PSR_EN_CFG, - DP_PSR_ENABLE & - ~DP_PSR_MAIN_LINK_ACTIVE); + drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, + DP_PSR_ENABLE & ~DP_PSR_MAIN_LINK_ACTIVE); else - intel_dp_aux_native_write_1(intel_dp, DP_PSR_EN_CFG, - DP_PSR_ENABLE | - DP_PSR_MAIN_LINK_ACTIVE); + drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, + DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE); /* Setup AUX registers */ I915_WRITE(EDP_PSR_AUX_DATA1(dev), EDP_PSR_DPCD_COMMAND); @@ -1659,7 +1636,7 @@ static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp) struct drm_i915_private *dev_priv = dev->dev_private; struct drm_crtc *crtc = dig_port->base.base.crtc; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - struct drm_i915_gem_object *obj = to_intel_framebuffer(crtc->fb)->obj; + struct drm_i915_gem_object *obj = to_intel_framebuffer(crtc->primary->fb)->obj; struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base; dev_priv->psr.source_ok = false; @@ -1675,7 +1652,7 @@ static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp) return false; } - if (!i915_enable_psr) { + if (!i915.enable_psr) { DRM_DEBUG_KMS("PSR disable by flag\n"); return false; } @@ -1692,7 +1669,7 @@ static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp) return false; } - obj = to_intel_framebuffer(crtc->fb)->obj; + obj = to_intel_framebuffer(crtc->primary->fb)->obj; if (obj->tiling_mode != I915_TILING_X || obj->fence_reg == I915_FENCE_REG_NONE) { DRM_DEBUG_KMS("PSR condition failed: fb not tiled or fenced\n"); @@ -1791,10 +1768,10 @@ static void intel_disable_dp(struct intel_encoder *encoder) /* Make sure the panel is off before trying to change the mode. But also * ensure that we have vdd while we switch off the panel. */ - ironlake_edp_panel_vdd_on(intel_dp); - ironlake_edp_backlight_off(intel_dp); + intel_edp_panel_vdd_on(intel_dp); + intel_edp_backlight_off(intel_dp); intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); - ironlake_edp_panel_off(intel_dp); + intel_edp_panel_off(intel_dp); /* cpu edp my only be disable _after_ the cpu pipe/plane is disabled. */ if (!(port == PORT_A || IS_VALLEYVIEW(dev))) @@ -1824,11 +1801,11 @@ static void intel_enable_dp(struct intel_encoder *encoder) if (WARN_ON(dp_reg & DP_PORT_EN)) return; - ironlake_edp_panel_vdd_on(intel_dp); + intel_edp_panel_vdd_on(intel_dp); intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); intel_dp_start_link_train(intel_dp); - ironlake_edp_panel_on(intel_dp); - ironlake_edp_panel_vdd_off(intel_dp, true); + intel_edp_panel_on(intel_dp); + edp_panel_vdd_off(intel_dp, true); intel_dp_complete_link_train(intel_dp); intel_dp_stop_link_train(intel_dp); } @@ -1838,14 +1815,14 @@ static void g4x_enable_dp(struct intel_encoder *encoder) struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); intel_enable_dp(encoder); - ironlake_edp_backlight_on(intel_dp); + intel_edp_backlight_on(intel_dp); } static void vlv_enable_dp(struct intel_encoder *encoder) { struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); - ironlake_edp_backlight_on(intel_dp); + intel_edp_backlight_on(intel_dp); } static void g4x_pre_enable_dp(struct intel_encoder *encoder) @@ -1927,26 +1904,25 @@ static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder) /* * Native read with retry for link status and receiver capability reads for * cases where the sink may still be asleep. + * + * Sinks are *supposed* to come up within 1ms from an off state, but we're also + * supposed to retry 3 times per the spec. */ -static bool -intel_dp_aux_native_read_retry(struct intel_dp *intel_dp, uint16_t address, - uint8_t *recv, int recv_bytes) +static ssize_t +intel_dp_dpcd_read_wake(struct drm_dp_aux *aux, unsigned int offset, + void *buffer, size_t size) { - int ret, i; + ssize_t ret; + int i; - /* - * Sinks are *supposed* to come up within 1ms from an off state, - * but we're also supposed to retry 3 times per the spec. - */ for (i = 0; i < 3; i++) { - ret = intel_dp_aux_native_read(intel_dp, address, recv, - recv_bytes); - if (ret == recv_bytes) - return true; + ret = drm_dp_dpcd_read(aux, offset, buffer, size); + if (ret == size) + return ret; msleep(1); } - return false; + return ret; } /* @@ -1956,10 +1932,10 @@ intel_dp_aux_native_read_retry(struct intel_dp *intel_dp, uint16_t address, static bool intel_dp_get_link_status(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE]) { - return intel_dp_aux_native_read_retry(intel_dp, - DP_LANE0_1_STATUS, - link_status, - DP_LINK_STATUS_SIZE); + return intel_dp_dpcd_read_wake(&intel_dp->aux, + DP_LANE0_1_STATUS, + link_status, + DP_LINK_STATUS_SIZE) == DP_LINK_STATUS_SIZE; } /* @@ -2473,8 +2449,8 @@ intel_dp_set_link_train(struct intel_dp *intel_dp, len = intel_dp->lane_count + 1; } - ret = intel_dp_aux_native_write(intel_dp, DP_TRAINING_PATTERN_SET, - buf, len); + ret = drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_PATTERN_SET, + buf, len); return ret == len; } @@ -2503,9 +2479,8 @@ intel_dp_update_link_train(struct intel_dp *intel_dp, uint32_t *DP, I915_WRITE(intel_dp->output_reg, *DP); POSTING_READ(intel_dp->output_reg); - ret = intel_dp_aux_native_write(intel_dp, DP_TRAINING_LANE0_SET, - intel_dp->train_set, - intel_dp->lane_count); + ret = drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_LANE0_SET, + intel_dp->train_set, intel_dp->lane_count); return ret == intel_dp->lane_count; } @@ -2561,11 +2536,11 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) link_config[1] = intel_dp->lane_count; if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; - intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET, link_config, 2); + drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, 2); link_config[0] = 0; link_config[1] = DP_SET_ANSI_8B10B; - intel_dp_aux_native_write(intel_dp, DP_DOWNSPREAD_CTRL, link_config, 2); + drm_dp_dpcd_write(&intel_dp->aux, DP_DOWNSPREAD_CTRL, link_config, 2); DP |= DP_PORT_EN; @@ -2638,10 +2613,15 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) bool channel_eq = false; int tries, cr_tries; uint32_t DP = intel_dp->DP; + uint32_t training_pattern = DP_TRAINING_PATTERN_2; + + /* Training Pattern 3 for HBR2 ot 1.2 devices that support it*/ + if (intel_dp->link_bw == DP_LINK_BW_5_4 || intel_dp->use_tps3) + training_pattern = DP_TRAINING_PATTERN_3; /* channel equalization */ if (!intel_dp_set_link_train(intel_dp, &DP, - DP_TRAINING_PATTERN_2 | + training_pattern | DP_LINK_SCRAMBLING_DISABLE)) { DRM_ERROR("failed to start channel equalization\n"); return; @@ -2668,7 +2648,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) if (!drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) { intel_dp_start_link_train(intel_dp); intel_dp_set_link_train(intel_dp, &DP, - DP_TRAINING_PATTERN_2 | + training_pattern | DP_LINK_SCRAMBLING_DISABLE); cr_tries++; continue; @@ -2684,7 +2664,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) intel_dp_link_down(intel_dp); intel_dp_start_link_train(intel_dp); intel_dp_set_link_train(intel_dp, &DP, - DP_TRAINING_PATTERN_2 | + training_pattern | DP_LINK_SCRAMBLING_DISABLE); tries = 0; cr_tries++; @@ -2803,8 +2783,8 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp) char dpcd_hex_dump[sizeof(intel_dp->dpcd) * 3]; - if (intel_dp_aux_native_read_retry(intel_dp, 0x000, intel_dp->dpcd, - sizeof(intel_dp->dpcd)) == 0) + if (intel_dp_dpcd_read_wake(&intel_dp->aux, 0x000, intel_dp->dpcd, + sizeof(intel_dp->dpcd)) < 0) return false; /* aux transfer failed */ hex_dump_to_buffer(intel_dp->dpcd, sizeof(intel_dp->dpcd), @@ -2817,15 +2797,23 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp) /* Check if the panel supports PSR */ memset(intel_dp->psr_dpcd, 0, sizeof(intel_dp->psr_dpcd)); if (is_edp(intel_dp)) { - intel_dp_aux_native_read_retry(intel_dp, DP_PSR_SUPPORT, - intel_dp->psr_dpcd, - sizeof(intel_dp->psr_dpcd)); + intel_dp_dpcd_read_wake(&intel_dp->aux, DP_PSR_SUPPORT, + intel_dp->psr_dpcd, + sizeof(intel_dp->psr_dpcd)); if (intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED) { dev_priv->psr.sink_support = true; DRM_DEBUG_KMS("Detected EDP PSR Panel.\n"); } } + /* Training Pattern 3 support */ + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x12 && + intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_TPS3_SUPPORTED) { + intel_dp->use_tps3 = true; + DRM_DEBUG_KMS("Displayport TPS3 supported"); + } else + intel_dp->use_tps3 = false; + if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT)) return true; /* native DP sink */ @@ -2833,9 +2821,9 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp) if (intel_dp->dpcd[DP_DPCD_REV] == 0x10) return true; /* no per-port downstream info */ - if (intel_dp_aux_native_read_retry(intel_dp, DP_DOWNSTREAM_PORT_0, - intel_dp->downstream_ports, - DP_MAX_DOWNSTREAM_PORTS) == 0) + if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_DOWNSTREAM_PORT_0, + intel_dp->downstream_ports, + DP_MAX_DOWNSTREAM_PORTS) < 0) return false; /* downstream port status fetch failed */ return true; @@ -2849,38 +2837,61 @@ intel_dp_probe_oui(struct intel_dp *intel_dp) if (!(intel_dp->dpcd[DP_DOWN_STREAM_PORT_COUNT] & DP_OUI_SUPPORT)) return; - ironlake_edp_panel_vdd_on(intel_dp); + intel_edp_panel_vdd_on(intel_dp); - if (intel_dp_aux_native_read_retry(intel_dp, DP_SINK_OUI, buf, 3)) + if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_SINK_OUI, buf, 3) == 3) DRM_DEBUG_KMS("Sink OUI: %02hx%02hx%02hx\n", buf[0], buf[1], buf[2]); - if (intel_dp_aux_native_read_retry(intel_dp, DP_BRANCH_OUI, buf, 3)) + if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_BRANCH_OUI, buf, 3) == 3) DRM_DEBUG_KMS("Branch OUI: %02hx%02hx%02hx\n", buf[0], buf[1], buf[2]); - ironlake_edp_panel_vdd_off(intel_dp, false); + edp_panel_vdd_off(intel_dp, false); } -static bool -intel_dp_get_sink_irq(struct intel_dp *intel_dp, u8 *sink_irq_vector) +int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc) { - int ret; + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + struct intel_crtc *intel_crtc = + to_intel_crtc(intel_dig_port->base.base.crtc); + u8 buf[1]; - ret = intel_dp_aux_native_read_retry(intel_dp, - DP_DEVICE_SERVICE_IRQ_VECTOR, - sink_irq_vector, 1); - if (!ret) - return false; + if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, buf) < 0) + return -EAGAIN; - return true; + if (!(buf[0] & DP_TEST_CRC_SUPPORTED)) + return -ENOTTY; + + if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK, + DP_TEST_SINK_START) < 0) + return -EAGAIN; + + /* Wait 2 vblanks to be sure we will have the correct CRC value */ + intel_wait_for_vblank(dev, intel_crtc->pipe); + intel_wait_for_vblank(dev, intel_crtc->pipe); + + if (drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_CRC_R_CR, crc, 6) < 0) + return -EAGAIN; + + drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK, 0); + return 0; +} + +static bool +intel_dp_get_sink_irq(struct intel_dp *intel_dp, u8 *sink_irq_vector) +{ + return intel_dp_dpcd_read_wake(&intel_dp->aux, + DP_DEVICE_SERVICE_IRQ_VECTOR, + sink_irq_vector, 1) == 1; } static void intel_dp_handle_test_request(struct intel_dp *intel_dp) { /* NAK by default */ - intel_dp_aux_native_write_1(intel_dp, DP_TEST_RESPONSE, DP_TEST_NAK); + drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_RESPONSE, DP_TEST_NAK); } /* @@ -2919,9 +2930,9 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && intel_dp_get_sink_irq(intel_dp, &sink_irq_vector)) { /* Clear interrupt source */ - intel_dp_aux_native_write_1(intel_dp, - DP_DEVICE_SERVICE_IRQ_VECTOR, - sink_irq_vector); + drm_dp_dpcd_writeb(&intel_dp->aux, + DP_DEVICE_SERVICE_IRQ_VECTOR, + sink_irq_vector); if (sink_irq_vector & DP_AUTOMATED_TEST_REQUEST) intel_dp_handle_test_request(intel_dp); @@ -2956,15 +2967,17 @@ intel_dp_detect_dpcd(struct intel_dp *intel_dp) if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && intel_dp->downstream_ports[0] & DP_DS_PORT_HPD) { uint8_t reg; - if (!intel_dp_aux_native_read_retry(intel_dp, DP_SINK_COUNT, - ®, 1)) + + if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_SINK_COUNT, + ®, 1) < 0) return connector_status_unknown; + return DP_GET_SINK_COUNT(reg) ? connector_status_connected : connector_status_disconnected; } /* If no HPD, poke DDC gently */ - if (drm_probe_ddc(&intel_dp->adapter)) + if (drm_probe_ddc(&intel_dp->aux.ddc)) return connector_status_connected; /* Well we tried, say unknown for unreliable port types */ @@ -3106,10 +3119,14 @@ intel_dp_detect(struct drm_connector *connector, bool force) struct drm_device *dev = connector->dev; struct drm_i915_private *dev_priv = dev->dev_private; enum drm_connector_status status; + enum intel_display_power_domain power_domain; struct edid *edid = NULL; intel_runtime_pm_get(dev_priv); + power_domain = intel_display_port_power_domain(intel_encoder); + intel_display_power_get(dev_priv, power_domain); + DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id, drm_get_connector_name(connector)); @@ -3128,7 +3145,7 @@ intel_dp_detect(struct drm_connector *connector, bool force) if (intel_dp->force_audio != HDMI_AUDIO_AUTO) { intel_dp->has_audio = (intel_dp->force_audio == HDMI_AUDIO_ON); } else { - edid = intel_dp_get_edid(connector, &intel_dp->adapter); + edid = intel_dp_get_edid(connector, &intel_dp->aux.ddc); if (edid) { intel_dp->has_audio = drm_detect_monitor_audio(edid); kfree(edid); @@ -3140,21 +3157,32 @@ intel_dp_detect(struct drm_connector *connector, bool force) status = connector_status_connected; out: + intel_display_power_put(dev_priv, power_domain); + intel_runtime_pm_put(dev_priv); + return status; } static int intel_dp_get_modes(struct drm_connector *connector) { struct intel_dp *intel_dp = intel_attached_dp(connector); + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct intel_encoder *intel_encoder = &intel_dig_port->base; struct intel_connector *intel_connector = to_intel_connector(connector); struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + enum intel_display_power_domain power_domain; int ret; /* We should parse the EDID data and find out if it has an audio sink */ - ret = intel_dp_get_edid_modes(connector, &intel_dp->adapter); + power_domain = intel_display_port_power_domain(intel_encoder); + intel_display_power_get(dev_priv, power_domain); + + ret = intel_dp_get_edid_modes(connector, &intel_dp->aux.ddc); + intel_display_power_put(dev_priv, power_domain); if (ret) return ret; @@ -3175,15 +3203,25 @@ static bool intel_dp_detect_audio(struct drm_connector *connector) { struct intel_dp *intel_dp = intel_attached_dp(connector); + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct intel_encoder *intel_encoder = &intel_dig_port->base; + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + enum intel_display_power_domain power_domain; struct edid *edid; bool has_audio = false; - edid = intel_dp_get_edid(connector, &intel_dp->adapter); + power_domain = intel_display_port_power_domain(intel_encoder); + intel_display_power_get(dev_priv, power_domain); + + edid = intel_dp_get_edid(connector, &intel_dp->aux.ddc); if (edid) { has_audio = drm_detect_monitor_audio(edid); kfree(edid); } + intel_display_power_put(dev_priv, power_domain); + return has_audio; } @@ -3298,12 +3336,12 @@ void intel_dp_encoder_destroy(struct drm_encoder *encoder) struct intel_dp *intel_dp = &intel_dig_port->dp; struct drm_device *dev = intel_dp_to_dev(intel_dp); - i2c_del_adapter(&intel_dp->adapter); + drm_dp_aux_unregister_i2c_bus(&intel_dp->aux); drm_encoder_cleanup(encoder); if (is_edp(intel_dp)) { cancel_delayed_work_sync(&intel_dp->panel_vdd_work); mutex_lock(&dev->mode_config.mutex); - ironlake_panel_vdd_off_sync(intel_dp); + edp_panel_vdd_off_sync(intel_dp); mutex_unlock(&dev->mode_config.mutex); } kfree(intel_dig_port); @@ -3402,6 +3440,13 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connect } } +static void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp) +{ + intel_dp->last_power_cycle = jiffies; + intel_dp->last_power_on = jiffies; + intel_dp->last_backlight_off = jiffies; +} + static void intel_dp_init_panel_power_sequencer(struct drm_device *dev, struct intel_dp *intel_dp, @@ -3524,10 +3569,17 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev, pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe); } - /* And finally store the new values in the power sequencer. */ + /* + * And finally store the new values in the power sequencer. The + * backlight delays are set to 1 because we do manual waits on them. For + * T8, even BSpec recommends doing it. For T9, if we don't do this, + * we'll end up waiting for the backlight off delay twice: once when we + * do the manual sleep, and once when we disable the panel and wait for + * the PP_STATUS bit to become zero. + */ pp_on = (seq->t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) | - (seq->t8 << PANEL_LIGHT_ON_DELAY_SHIFT); - pp_off = (seq->t9 << PANEL_LIGHT_OFF_DELAY_SHIFT) | + (1 << PANEL_LIGHT_ON_DELAY_SHIFT); + pp_off = (1 << PANEL_LIGHT_OFF_DELAY_SHIFT) | (seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT); /* Compute the divisor for the pp clock, simply match the Bspec * formula. */ @@ -3562,14 +3614,14 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev, } static bool intel_edp_init_connector(struct intel_dp *intel_dp, - struct intel_connector *intel_connector) + struct intel_connector *intel_connector, + struct edp_power_seq *power_seq) { struct drm_connector *connector = &intel_connector->base; struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); struct drm_device *dev = intel_dig_port->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_display_mode *fixed_mode = NULL; - struct edp_power_seq power_seq = { 0 }; bool has_dpcd; struct drm_display_mode *scan; struct edid *edid; @@ -3577,12 +3629,10 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, if (!is_edp(intel_dp)) return true; - intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq); - /* Cache DPCD and EDID for edp. */ - ironlake_edp_panel_vdd_on(intel_dp); + intel_edp_panel_vdd_on(intel_dp); has_dpcd = intel_dp_get_dpcd(intel_dp); - ironlake_edp_panel_vdd_off(intel_dp, false); + edp_panel_vdd_off(intel_dp, false); if (has_dpcd) { if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) @@ -3596,10 +3646,10 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, } /* We now know it's not a ghost, init power sequence regs. */ - intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, - &power_seq); + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, power_seq); - edid = drm_get_edid(connector, &intel_dp->adapter); + mutex_lock(&dev->mode_config.mutex); + edid = drm_get_edid(connector, &intel_dp->aux.ddc); if (edid) { if (drm_add_edid_modes(connector, edid)) { drm_mode_connector_update_edid_property(connector, @@ -3629,8 +3679,9 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, if (fixed_mode) fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; } + mutex_unlock(&dev->mode_config.mutex); - intel_panel_init(&intel_connector->panel, fixed_mode); + intel_panel_init(&intel_connector->panel, fixed_mode, NULL); intel_panel_setup_backlight(connector); return true; @@ -3646,8 +3697,20 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, struct drm_device *dev = intel_encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; enum port port = intel_dig_port->port; - const char *name = NULL; - int type, error; + struct edp_power_seq power_seq = { 0 }; + int type; + + /* intel_dp vfuncs */ + if (IS_VALLEYVIEW(dev)) + intel_dp->get_aux_clock_divider = vlv_get_aux_clock_divider; + else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) + intel_dp->get_aux_clock_divider = hsw_get_aux_clock_divider; + else if (HAS_PCH_SPLIT(dev)) + intel_dp->get_aux_clock_divider = ilk_get_aux_clock_divider; + else + intel_dp->get_aux_clock_divider = i9xx_get_aux_clock_divider; + + intel_dp->get_aux_send_ctl = i9xx_get_aux_send_ctl; /* Preserve the current hw state. */ intel_dp->DP = I915_READ(intel_dp->output_reg); @@ -3677,7 +3740,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, connector->doublescan_allowed = 0; INIT_DELAYED_WORK(&intel_dp->panel_vdd_work, - ironlake_panel_vdd_work); + edp_panel_vdd_work); intel_connector_attach_encoder(intel_connector, intel_encoder); drm_sysfs_connector_add(connector); @@ -3686,61 +3749,41 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, intel_connector->get_hw_state = intel_ddi_connector_get_hw_state; else intel_connector->get_hw_state = intel_connector_get_hw_state; + intel_connector->unregister = intel_dp_connector_unregister; - intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10; - if (HAS_DDI(dev)) { - switch (intel_dig_port->port) { - case PORT_A: - intel_dp->aux_ch_ctl_reg = DPA_AUX_CH_CTL; - break; - case PORT_B: - intel_dp->aux_ch_ctl_reg = PCH_DPB_AUX_CH_CTL; - break; - case PORT_C: - intel_dp->aux_ch_ctl_reg = PCH_DPC_AUX_CH_CTL; - break; - case PORT_D: - intel_dp->aux_ch_ctl_reg = PCH_DPD_AUX_CH_CTL; - break; - default: - BUG(); - } - } - - /* Set up the DDC bus. */ + /* Set up the hotplug pin. */ switch (port) { case PORT_A: intel_encoder->hpd_pin = HPD_PORT_A; - name = "DPDDC-A"; break; case PORT_B: intel_encoder->hpd_pin = HPD_PORT_B; - name = "DPDDC-B"; break; case PORT_C: intel_encoder->hpd_pin = HPD_PORT_C; - name = "DPDDC-C"; break; case PORT_D: intel_encoder->hpd_pin = HPD_PORT_D; - name = "DPDDC-D"; break; default: BUG(); } - error = intel_dp_i2c_init(intel_dp, intel_connector, name); - WARN(error, "intel_dp_i2c_init failed with error %d for port %c\n", - error, port_name(port)); + if (is_edp(intel_dp)) { + intel_dp_init_panel_power_timestamps(intel_dp); + intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq); + } + + intel_dp_aux_init(intel_dp, intel_connector); intel_dp->psr_setup_done = false; - if (!intel_edp_init_connector(intel_dp, intel_connector)) { - i2c_del_adapter(&intel_dp->adapter); + if (!intel_edp_init_connector(intel_dp, intel_connector, &power_seq)) { + drm_dp_aux_unregister_i2c_bus(&intel_dp->aux); if (is_edp(intel_dp)) { cancel_delayed_work_sync(&intel_dp->panel_vdd_work); mutex_lock(&dev->mode_config.mutex); - ironlake_panel_vdd_off_sync(intel_dp); + edp_panel_vdd_off_sync(intel_dp); mutex_unlock(&dev->mode_config.mutex); } drm_sysfs_connector_remove(connector); @@ -3806,7 +3849,7 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port) intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT; intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2); - intel_encoder->cloneable = false; + intel_encoder->cloneable = 0; intel_encoder->hot_plug = intel_dp_hot_plug; if (!intel_dp_init_connector(intel_dig_port, intel_connector)) { |