diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 2173 |
1 files changed, 1591 insertions, 582 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index f6159765f1eb..e3c02655d36f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -32,13 +32,13 @@ #include <linux/slab.h> #include <linux/vgaarb.h> #include <drm/drm_edid.h> -#include "drmP.h" +#include <drm/drmP.h> #include "intel_drv.h" -#include "i915_drm.h" +#include <drm/i915_drm.h> #include "i915_drv.h" #include "i915_trace.h" -#include "drm_dp_helper.h" -#include "drm_crtc_helper.h" +#include <drm/drm_dp_helper.h> +#include <drm/drm_crtc_helper.h> #include <linux/dma_remapping.h> #define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) @@ -869,6 +869,7 @@ intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc, unsigned long bestppm, ppm, absppm; int dotclk, flag; + flag = 0; dotclk = target * 1000; bestppm = 1000000; ppm = absppm = 0; @@ -1005,7 +1006,7 @@ void intel_wait_for_pipe_off(struct drm_device *dev, int pipe) /* Wait for the Pipe State to go off */ if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0, 100)) - DRM_DEBUG_KMS("pipe_off wait timed out\n"); + WARN(1, "pipe_off wait timed out\n"); } else { u32 last_line, line_mask; int reg = PIPEDSL(pipe); @@ -1023,7 +1024,7 @@ void intel_wait_for_pipe_off(struct drm_device *dev, int pipe) } while (((I915_READ(reg) & line_mask) != last_line) && time_after(timeout, jiffies)); if (time_after(jiffies, timeout)) - DRM_DEBUG_KMS("pipe_off wait timed out\n"); + WARN(1, "pipe_off wait timed out\n"); } } @@ -1375,7 +1376,8 @@ static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv, "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n", reg, pipe_name(pipe)); - WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_PIPE_B_SELECT), + WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0 + && (val & DP_PIPEB_SELECT), "IBX PCH dp port still using transcoder B\n"); } @@ -1383,11 +1385,12 @@ static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv, enum pipe pipe, int reg) { u32 val = I915_READ(reg); - WARN(hdmi_pipe_enabled(dev_priv, val, pipe), + WARN(hdmi_pipe_enabled(dev_priv, pipe, val), "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n", reg, pipe_name(pipe)); - WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_PIPE_B_SELECT), + WARN(HAS_PCH_IBX(dev_priv->dev) && (val & PORT_ENABLE) == 0 + && (val & SDVO_PIPE_B_SELECT), "IBX PCH hdmi port still using transcoder B\n"); } @@ -1403,13 +1406,13 @@ static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv, reg = PCH_ADPA; val = I915_READ(reg); - WARN(adpa_pipe_enabled(dev_priv, val, pipe), + WARN(adpa_pipe_enabled(dev_priv, pipe, val), "PCH VGA enabled on transcoder %c, should be disabled\n", pipe_name(pipe)); reg = PCH_LVDS; val = I915_READ(reg); - WARN(lvds_pipe_enabled(dev_priv, val, pipe), + WARN(lvds_pipe_enabled(dev_priv, pipe, val), "PCH LVDS enabled on transcoder %c, should be disabled\n", pipe_name(pipe)); @@ -1428,6 +1431,8 @@ static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv, * protect mechanism may be enabled. * * Note! This is for pre-ILK only. + * + * Unfortunately needed by dvo_ns2501 since the dvo depends on it running. */ static void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) { @@ -1857,59 +1862,6 @@ static void intel_disable_plane(struct drm_i915_private *dev_priv, intel_wait_for_vblank(dev_priv->dev, pipe); } -static void disable_pch_dp(struct drm_i915_private *dev_priv, - enum pipe pipe, int reg, u32 port_sel) -{ - u32 val = I915_READ(reg); - if (dp_pipe_enabled(dev_priv, pipe, port_sel, val)) { - DRM_DEBUG_KMS("Disabling pch dp %x on pipe %d\n", reg, pipe); - I915_WRITE(reg, val & ~DP_PORT_EN); - } -} - -static void disable_pch_hdmi(struct drm_i915_private *dev_priv, - enum pipe pipe, int reg) -{ - u32 val = I915_READ(reg); - if (hdmi_pipe_enabled(dev_priv, val, pipe)) { - DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n", - reg, pipe); - I915_WRITE(reg, val & ~PORT_ENABLE); - } -} - -/* Disable any ports connected to this transcoder */ -static void intel_disable_pch_ports(struct drm_i915_private *dev_priv, - enum pipe pipe) -{ - u32 reg, val; - - val = I915_READ(PCH_PP_CONTROL); - I915_WRITE(PCH_PP_CONTROL, val | PANEL_UNLOCK_REGS); - - disable_pch_dp(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B); - disable_pch_dp(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C); - disable_pch_dp(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D); - - reg = PCH_ADPA; - val = I915_READ(reg); - if (adpa_pipe_enabled(dev_priv, val, pipe)) - I915_WRITE(reg, val & ~ADPA_DAC_ENABLE); - - reg = PCH_LVDS; - val = I915_READ(reg); - if (lvds_pipe_enabled(dev_priv, val, pipe)) { - DRM_DEBUG_KMS("disable lvds on pipe %d val 0x%08x\n", pipe, val); - I915_WRITE(reg, val & ~LVDS_PORT_EN); - POSTING_READ(reg); - udelay(100); - } - - disable_pch_hdmi(dev_priv, pipe, HDMIB); - disable_pch_hdmi(dev_priv, pipe, HDMIC); - disable_pch_hdmi(dev_priv, pipe, HDMID); -} - int intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_i915_gem_object *obj, @@ -2198,16 +2150,17 @@ intel_finish_fb(struct drm_framebuffer *old_fb) static int intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, - struct drm_framebuffer *old_fb) + struct drm_framebuffer *fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_master_private *master_priv; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct drm_framebuffer *old_fb; int ret; /* no fb bound */ - if (!crtc->fb) { + if (!fb) { DRM_ERROR("No FB bound\n"); return 0; } @@ -2221,7 +2174,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, mutex_lock(&dev->struct_mutex); ret = intel_pin_and_fence_fb_obj(dev, - to_intel_framebuffer(crtc->fb)->obj, + to_intel_framebuffer(fb)->obj, NULL); if (ret != 0) { mutex_unlock(&dev->struct_mutex); @@ -2229,17 +2182,22 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, return ret; } - if (old_fb) - intel_finish_fb(old_fb); + if (crtc->fb) + intel_finish_fb(crtc->fb); - ret = dev_priv->display.update_plane(crtc, crtc->fb, x, y); + ret = dev_priv->display.update_plane(crtc, fb, x, y); if (ret) { - intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj); + intel_unpin_fb_obj(to_intel_framebuffer(fb)->obj); mutex_unlock(&dev->struct_mutex); DRM_ERROR("failed to update base address\n"); return ret; } + old_fb = crtc->fb; + crtc->fb = fb; + crtc->x = x; + crtc->y = y; + if (old_fb) { intel_wait_for_vblank(dev, intel_crtc->pipe); intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj); @@ -2706,11 +2664,10 @@ static void ivb_manual_fdi_link_train(struct drm_crtc *crtc) DRM_DEBUG_KMS("FDI train done.\n"); } -static void ironlake_fdi_pll_enable(struct drm_crtc *crtc) +static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc) { - struct drm_device *dev = crtc->dev; + struct drm_device *dev = intel_crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; u32 reg, temp; @@ -2751,6 +2708,35 @@ static void ironlake_fdi_pll_enable(struct drm_crtc *crtc) } } +static void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc) +{ + struct drm_device *dev = intel_crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + int pipe = intel_crtc->pipe; + u32 reg, temp; + + /* Switch from PCDclk to Rawclk */ + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp & ~FDI_PCDCLK); + + /* Disable CPU FDI TX PLL */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE); + + POSTING_READ(reg); + udelay(100); + + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE); + + /* Wait for the clocks to turn off. */ + POSTING_READ(reg); + udelay(100); +} + static void cpt_phase_pointer_disable(struct drm_device *dev, int pipe) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -2835,13 +2821,13 @@ static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc) static bool intel_crtc_driving_pch(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; - struct intel_encoder *encoder; + struct intel_encoder *intel_encoder; /* * If there's a non-PCH eDP on this crtc, it must be DP_A, and that * must be driven by its own crtc; no sharing is possible. */ - for_each_encoder_on_crtc(dev, crtc, encoder) { + for_each_encoder_on_crtc(dev, crtc, intel_encoder) { /* On Haswell, LPT PCH handles the VGA connection via FDI, and Haswell * CPU handles all others */ @@ -2849,19 +2835,19 @@ static bool intel_crtc_driving_pch(struct drm_crtc *crtc) /* It is still unclear how this will work on PPT, so throw up a warning */ WARN_ON(!HAS_PCH_LPT(dev)); - if (encoder->type == DRM_MODE_ENCODER_DAC) { + if (intel_encoder->type == INTEL_OUTPUT_ANALOG) { DRM_DEBUG_KMS("Haswell detected DAC encoder, assuming is PCH\n"); return true; } else { DRM_DEBUG_KMS("Haswell detected encoder %d, assuming is CPU\n", - encoder->type); + intel_encoder->type); return false; } } - switch (encoder->type) { + switch (intel_encoder->type) { case INTEL_OUTPUT_EDP: - if (!intel_encoder_is_pch_edp(&encoder->base)) + if (!intel_encoder_is_pch_edp(&intel_encoder->base)) return false; continue; } @@ -3178,11 +3164,14 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_encoder *encoder; int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; u32 temp; bool is_pch_port; + WARN_ON(!crtc->enabled); + if (intel_crtc->active) return; @@ -3197,10 +3186,16 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) is_pch_port = intel_crtc_driving_pch(crtc); - if (is_pch_port) - ironlake_fdi_pll_enable(crtc); - else - ironlake_fdi_disable(crtc); + if (is_pch_port) { + ironlake_fdi_pll_enable(intel_crtc); + } else { + assert_fdi_tx_disabled(dev_priv, pipe); + assert_fdi_rx_disabled(dev_priv, pipe); + } + + for_each_encoder_on_crtc(dev, crtc, encoder) + if (encoder->pre_enable) + encoder->pre_enable(encoder); /* Enable panel fitting for LVDS */ if (dev_priv->pch_pf_size && @@ -3231,6 +3226,12 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) mutex_unlock(&dev->struct_mutex); intel_crtc_update_cursor(crtc, true); + + for_each_encoder_on_crtc(dev, crtc, encoder) + encoder->enable(encoder); + + if (HAS_PCH_CPT(dev)) + intel_cpt_verify_modeset(dev, intel_crtc->pipe); } static void ironlake_crtc_disable(struct drm_crtc *crtc) @@ -3238,13 +3239,18 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_encoder *encoder; int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; u32 reg, temp; + if (!intel_crtc->active) return; + for_each_encoder_on_crtc(dev, crtc, encoder) + encoder->disable(encoder); + intel_crtc_wait_for_pending_flips(crtc); drm_vblank_off(dev, pipe); intel_crtc_update_cursor(crtc, false); @@ -3260,14 +3266,11 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) I915_WRITE(PF_CTL(pipe), 0); I915_WRITE(PF_WIN_SZ(pipe), 0); - ironlake_fdi_disable(crtc); + for_each_encoder_on_crtc(dev, crtc, encoder) + if (encoder->post_disable) + encoder->post_disable(encoder); - /* This is a horrible layering violation; we should be doing this in - * the connector/encoder ->prepare instead, but we don't always have - * enough information there about the config to know whether it will - * actually be necessary or just cause undesired flicker. - */ - intel_disable_pch_ports(dev_priv, pipe); + ironlake_fdi_disable(crtc); intel_disable_transcoder(dev_priv, pipe); @@ -3301,26 +3304,7 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) /* disable PCH DPLL */ intel_disable_pch_pll(intel_crtc); - /* Switch from PCDclk to Rawclk */ - reg = FDI_RX_CTL(pipe); - temp = I915_READ(reg); - I915_WRITE(reg, temp & ~FDI_PCDCLK); - - /* Disable CPU FDI TX PLL */ - reg = FDI_TX_CTL(pipe); - temp = I915_READ(reg); - I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE); - - POSTING_READ(reg); - udelay(100); - - reg = FDI_RX_CTL(pipe); - temp = I915_READ(reg); - I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE); - - /* Wait for the clocks to turn off. */ - POSTING_READ(reg); - udelay(100); + ironlake_fdi_pll_disable(intel_crtc); intel_crtc->active = false; intel_update_watermarks(dev); @@ -3330,30 +3314,6 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) mutex_unlock(&dev->struct_mutex); } -static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) -{ - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int pipe = intel_crtc->pipe; - int plane = intel_crtc->plane; - - /* XXX: When our outputs are all unaware of DPMS modes other than off - * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. - */ - switch (mode) { - case DRM_MODE_DPMS_ON: - case DRM_MODE_DPMS_STANDBY: - case DRM_MODE_DPMS_SUSPEND: - DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane); - ironlake_crtc_enable(crtc); - break; - - case DRM_MODE_DPMS_OFF: - DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane); - ironlake_crtc_disable(crtc); - break; - } -} - static void ironlake_crtc_off(struct drm_crtc *crtc) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); @@ -3383,9 +3343,12 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_encoder *encoder; int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; + WARN_ON(!crtc->enabled); + if (intel_crtc->active) return; @@ -3402,6 +3365,9 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc) /* Give the overlay scaler a chance to enable if it's on this pipe */ intel_crtc_dpms_overlay(intel_crtc, true); intel_crtc_update_cursor(crtc, true); + + for_each_encoder_on_crtc(dev, crtc, encoder) + encoder->enable(encoder); } static void i9xx_crtc_disable(struct drm_crtc *crtc) @@ -3409,12 +3375,17 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_encoder *encoder; int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; + if (!intel_crtc->active) return; + for_each_encoder_on_crtc(dev, crtc, encoder) + encoder->disable(encoder); + /* Give the overlay scaler a chance to disable if it's on this pipe */ intel_crtc_wait_for_pending_flips(crtc); drm_vblank_off(dev, pipe); @@ -3433,45 +3404,17 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc) intel_update_watermarks(dev); } -static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) -{ - /* XXX: When our outputs are all unaware of DPMS modes other than off - * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. - */ - switch (mode) { - case DRM_MODE_DPMS_ON: - case DRM_MODE_DPMS_STANDBY: - case DRM_MODE_DPMS_SUSPEND: - i9xx_crtc_enable(crtc); - break; - case DRM_MODE_DPMS_OFF: - i9xx_crtc_disable(crtc); - break; - } -} - static void i9xx_crtc_off(struct drm_crtc *crtc) { } -/** - * Sets the power management mode of the pipe and plane. - */ -static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) +static void intel_crtc_update_sarea(struct drm_crtc *crtc, + bool enabled) { struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_master_private *master_priv; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - bool enabled; - - if (intel_crtc->dpms_mode == mode) - return; - - intel_crtc->dpms_mode = mode; - - dev_priv->display.dpms(crtc, mode); if (!dev->primary->master) return; @@ -3480,8 +3423,6 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) if (!master_priv->sarea_priv) return; - enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF; - switch (pipe) { case 0: master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0; @@ -3497,13 +3438,42 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) } } +/** + * Sets the power management mode of the pipe and plane. + */ +void intel_crtc_update_dpms(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_encoder *intel_encoder; + bool enable = false; + + for_each_encoder_on_crtc(dev, crtc, intel_encoder) + enable |= intel_encoder->connectors_active; + + if (enable) + dev_priv->display.crtc_enable(crtc); + else + dev_priv->display.crtc_disable(crtc); + + intel_crtc_update_sarea(crtc, enable); +} + +static void intel_crtc_noop(struct drm_crtc *crtc) +{ +} + static void intel_crtc_disable(struct drm_crtc *crtc) { - struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; struct drm_device *dev = crtc->dev; + struct drm_connector *connector; struct drm_i915_private *dev_priv = dev->dev_private; - crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); + /* crtc should still be enabled when we disable it. */ + WARN_ON(!crtc->enabled); + + dev_priv->display.crtc_disable(crtc); + intel_crtc_update_sarea(crtc, false); dev_priv->display.off(crtc); assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane); @@ -3513,63 +3483,128 @@ static void intel_crtc_disable(struct drm_crtc *crtc) mutex_lock(&dev->struct_mutex); intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj); mutex_unlock(&dev->struct_mutex); + crtc->fb = NULL; + } + + /* Update computed state. */ + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + if (!connector->encoder || !connector->encoder->crtc) + continue; + + if (connector->encoder->crtc != crtc) + continue; + + connector->dpms = DRM_MODE_DPMS_OFF; + to_intel_encoder(connector->encoder)->connectors_active = false; } } -/* Prepare for a mode set. - * - * Note we could be a lot smarter here. We need to figure out which outputs - * will be enabled, which disabled (in short, how the config will changes) - * and perform the minimum necessary steps to accomplish that, e.g. updating - * watermarks, FBC configuration, making sure PLLs are programmed correctly, - * panel fitting is in the proper state, etc. - */ -static void i9xx_crtc_prepare(struct drm_crtc *crtc) +void intel_modeset_disable(struct drm_device *dev) { - i9xx_crtc_disable(crtc); + struct drm_crtc *crtc; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + if (crtc->enabled) + intel_crtc_disable(crtc); + } } -static void i9xx_crtc_commit(struct drm_crtc *crtc) +void intel_encoder_noop(struct drm_encoder *encoder) { - i9xx_crtc_enable(crtc); } -static void ironlake_crtc_prepare(struct drm_crtc *crtc) +void intel_encoder_destroy(struct drm_encoder *encoder) { - ironlake_crtc_disable(crtc); + struct intel_encoder *intel_encoder = to_intel_encoder(encoder); + + drm_encoder_cleanup(encoder); + kfree(intel_encoder); } -static void ironlake_crtc_commit(struct drm_crtc *crtc) +/* Simple dpms helper for encodres with just one connector, no cloning and only + * one kind of off state. It clamps all !ON modes to fully OFF and changes the + * state of the entire output pipe. */ +void intel_encoder_dpms(struct intel_encoder *encoder, int mode) { - ironlake_crtc_enable(crtc); + if (mode == DRM_MODE_DPMS_ON) { + encoder->connectors_active = true; + + intel_crtc_update_dpms(encoder->base.crtc); + } else { + encoder->connectors_active = false; + + intel_crtc_update_dpms(encoder->base.crtc); + } } -void intel_encoder_prepare(struct drm_encoder *encoder) +/* Cross check the actual hw state with our own modeset state tracking (and it's + * internal consistency). */ +static void intel_connector_check_state(struct intel_connector *connector) { - struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; - /* lvds has its own version of prepare see intel_lvds_prepare */ - encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF); + if (connector->get_hw_state(connector)) { + struct intel_encoder *encoder = connector->encoder; + struct drm_crtc *crtc; + bool encoder_enabled; + enum pipe pipe; + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", + connector->base.base.id, + drm_get_connector_name(&connector->base)); + + WARN(connector->base.dpms == DRM_MODE_DPMS_OFF, + "wrong connector dpms state\n"); + WARN(connector->base.encoder != &encoder->base, + "active connector not linked to encoder\n"); + WARN(!encoder->connectors_active, + "encoder->connectors_active not set\n"); + + encoder_enabled = encoder->get_hw_state(encoder, &pipe); + WARN(!encoder_enabled, "encoder not enabled\n"); + if (WARN_ON(!encoder->base.crtc)) + return; + + crtc = encoder->base.crtc; + + WARN(!crtc->enabled, "crtc not enabled\n"); + WARN(!to_intel_crtc(crtc)->active, "crtc not active\n"); + WARN(pipe != to_intel_crtc(crtc)->pipe, + "encoder active on the wrong pipe\n"); + } } -void intel_encoder_commit(struct drm_encoder *encoder) +/* Even simpler default implementation, if there's really no special case to + * consider. */ +void intel_connector_dpms(struct drm_connector *connector, int mode) { - struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; - struct drm_device *dev = encoder->dev; - struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); + struct intel_encoder *encoder = intel_attached_encoder(connector); - /* lvds has its own version of commit see intel_lvds_commit */ - encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); + /* All the simple cases only support two dpms states. */ + if (mode != DRM_MODE_DPMS_ON) + mode = DRM_MODE_DPMS_OFF; - if (HAS_PCH_CPT(dev)) - intel_cpt_verify_modeset(dev, intel_crtc->pipe); + if (mode == connector->dpms) + return; + + connector->dpms = mode; + + /* Only need to change hw state when actually enabled */ + if (encoder->base.crtc) + intel_encoder_dpms(encoder, mode); + else + WARN_ON(encoder->connectors_active != false); + + intel_modeset_check_state(connector->dev); } -void intel_encoder_destroy(struct drm_encoder *encoder) +/* Simple connector->get_hw_state implementation for encoders that support only + * one connector and no cloning and hence the encoder state determines the state + * of the connector. */ +bool intel_connector_get_hw_state(struct intel_connector *connector) { - struct intel_encoder *intel_encoder = to_intel_encoder(encoder); + enum pipe pipe = 0; + struct intel_encoder *encoder = connector->encoder; - drm_encoder_cleanup(encoder); - kfree(intel_encoder); + return encoder->get_hw_state(encoder, &pipe); } static bool intel_crtc_mode_fixup(struct drm_crtc *crtc, @@ -3590,6 +3625,13 @@ static bool intel_crtc_mode_fixup(struct drm_crtc *crtc, if (!(adjusted_mode->private_flags & INTEL_MODE_CRTC_TIMINGS_SET)) drm_mode_set_crtcinfo(adjusted_mode, 0); + /* WaPruneModeWithIncorrectHsyncOffset: Cantiga+ cannot handle modes + * with a hsync front porch of 0. + */ + if ((INTEL_INFO(dev)->gen > 4 || IS_G4X(dev)) && + adjusted_mode->hsync_start == adjusted_mode->hdisplay) + return false; + return true; } @@ -3725,6 +3767,7 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) * true if they don't match). */ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, + struct drm_framebuffer *fb, unsigned int *pipe_bpp, struct drm_display_mode *mode) { @@ -3753,17 +3796,6 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, continue; } - if (intel_encoder->type == INTEL_OUTPUT_EDP) { - /* Use VBT settings if we have an eDP panel */ - unsigned int edp_bpc = dev_priv->edp.bpp / 3; - - if (edp_bpc < display_bpc) { - DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); - display_bpc = edp_bpc; - } - continue; - } - /* Not one of the known troublemakers, check the EDID */ list_for_each_entry(connector, &dev->mode_config.connector_list, head) { @@ -3805,7 +3837,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, * also stays within the max display bpc discovered above. */ - switch (crtc->fb->depth) { + switch (fb->depth) { case 8: bpc = 8; /* since we go through a colormap */ break; @@ -4199,12 +4231,6 @@ static void i8xx_update_pll(struct drm_crtc *crtc, POSTING_READ(DPLL(pipe)); udelay(150); - I915_WRITE(DPLL(pipe), dpll); - - /* Wait for the clocks to stabilize. */ - POSTING_READ(DPLL(pipe)); - udelay(150); - /* The LVDS pin pair needs to be on before the DPLLs are enabled. * This is an exception to the general rule that mode_set doesn't turn * things on. @@ -4212,6 +4238,12 @@ static void i8xx_update_pll(struct drm_crtc *crtc, if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) intel_update_lvds(crtc, clock, adjusted_mode); + I915_WRITE(DPLL(pipe), dpll); + + /* Wait for the clocks to stabilize. */ + POSTING_READ(DPLL(pipe)); + udelay(150); + /* The pixel multiplier can only be updated once the * DPLL is enabled and the clocks are stable. * @@ -4224,7 +4256,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, int x, int y, - struct drm_framebuffer *old_fb) + struct drm_framebuffer *fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -4414,7 +4446,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(DSPCNTR(plane), dspcntr); POSTING_READ(DSPCNTR(plane)); - ret = intel_pipe_set_base(crtc, x, y, old_fb); + ret = intel_pipe_set_base(crtc, x, y, fb); intel_update_watermarks(dev); @@ -4568,24 +4600,130 @@ static int ironlake_get_refclk(struct drm_crtc *crtc) return 120000; } +static void ironlake_set_pipeconf(struct drm_crtc *crtc, + struct drm_display_mode *adjusted_mode, + bool dither) +{ + struct drm_i915_private *dev_priv = crtc->dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + uint32_t val; + + val = I915_READ(PIPECONF(pipe)); + + val &= ~PIPE_BPC_MASK; + switch (intel_crtc->bpp) { + case 18: + val |= PIPE_6BPC; + break; + case 24: + val |= PIPE_8BPC; + break; + case 30: + val |= PIPE_10BPC; + break; + case 36: + val |= PIPE_12BPC; + break; + default: + val |= PIPE_8BPC; + break; + } + + val &= ~(PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_MASK); + if (dither) + val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP); + + val &= ~PIPECONF_INTERLACE_MASK; + if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) + val |= PIPECONF_INTERLACED_ILK; + else + val |= PIPECONF_PROGRESSIVE; + + I915_WRITE(PIPECONF(pipe), val); + POSTING_READ(PIPECONF(pipe)); +} + +static bool ironlake_compute_clocks(struct drm_crtc *crtc, + struct drm_display_mode *adjusted_mode, + intel_clock_t *clock, + bool *has_reduced_clock, + intel_clock_t *reduced_clock) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_encoder *intel_encoder; + int refclk; + const intel_limit_t *limit; + bool ret, is_sdvo = false, is_tv = false, is_lvds = false; + + for_each_encoder_on_crtc(dev, crtc, intel_encoder) { + switch (intel_encoder->type) { + case INTEL_OUTPUT_LVDS: + is_lvds = true; + break; + case INTEL_OUTPUT_SDVO: + case INTEL_OUTPUT_HDMI: + is_sdvo = true; + if (intel_encoder->needs_tv_clock) + is_tv = true; + break; + case INTEL_OUTPUT_TVOUT: + is_tv = true; + break; + } + } + + refclk = ironlake_get_refclk(crtc); + + /* + * Returns a set of divisors for the desired target clock with the given + * refclk, or FALSE. The returned values represent the clock equation: + * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2. + */ + limit = intel_limit(crtc, refclk); + ret = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL, + clock); + if (!ret) + return false; + + if (is_lvds && dev_priv->lvds_downclock_avail) { + /* + * Ensure we match the reduced clock's P to the target clock. + * If the clocks don't match, we can't switch the display clock + * by using the FP0/FP1. In such case we will disable the LVDS + * downclock feature. + */ + *has_reduced_clock = limit->find_pll(limit, crtc, + dev_priv->lvds_downclock, + refclk, + clock, + reduced_clock); + } + + if (is_sdvo && is_tv) + i9xx_adjust_sdvo_tv_clock(adjusted_mode, clock); + + return true; +} + static int ironlake_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, int x, int y, - struct drm_framebuffer *old_fb) + struct drm_framebuffer *fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; - int refclk, num_connectors = 0; + int num_connectors = 0; intel_clock_t clock, reduced_clock; - u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf; + u32 dpll, fp = 0, fp2 = 0; bool ok, has_reduced_clock = false, is_sdvo = false; bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; struct intel_encoder *encoder, *edp_encoder = NULL; - const intel_limit_t *limit; int ret; struct fdi_m_n m_n = {0}; u32 temp; @@ -4627,16 +4765,8 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, num_connectors++; } - refclk = ironlake_get_refclk(crtc); - - /* - * Returns a set of divisors for the desired target clock with the given - * refclk, or FALSE. The returned values represent the clock equation: - * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2. - */ - limit = intel_limit(crtc, refclk); - ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL, - &clock); + ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock, + &has_reduced_clock, &reduced_clock); if (!ok) { DRM_ERROR("Couldn't find PLL settings for mode!\n"); return -EINVAL; @@ -4645,24 +4775,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, /* Ensure that the cursor is valid for the new mode before changing... */ intel_crtc_update_cursor(crtc, true); - if (is_lvds && dev_priv->lvds_downclock_avail) { - /* - * Ensure we match the reduced clock's P to the target clock. - * If the clocks don't match, we can't switch the display clock - * by using the FP0/FP1. In such case we will disable the LVDS - * downclock feature. - */ - has_reduced_clock = limit->find_pll(limit, crtc, - dev_priv->lvds_downclock, - refclk, - &clock, - &reduced_clock); - } - - if (is_sdvo && is_tv) - i9xx_adjust_sdvo_tv_clock(adjusted_mode, &clock); - - /* FDI link */ pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); lane = 0; @@ -4690,32 +4802,17 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, target_clock = adjusted_mode->clock; /* determine panel color depth */ - temp = I915_READ(PIPECONF(pipe)); - temp &= ~PIPE_BPC_MASK; - dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, mode); - switch (pipe_bpp) { - case 18: - temp |= PIPE_6BPC; - break; - case 24: - temp |= PIPE_8BPC; - break; - case 30: - temp |= PIPE_10BPC; - break; - case 36: - temp |= PIPE_12BPC; - break; - default: + dither = intel_choose_pipe_bpp_dither(crtc, fb, &pipe_bpp, mode); + if (is_lvds && dev_priv->lvds_dither) + dither = true; + + if (pipe_bpp != 18 && pipe_bpp != 24 && pipe_bpp != 30 && + pipe_bpp != 36) { WARN(1, "intel_choose_pipe_bpp returned invalid value %d\n", - pipe_bpp); - temp |= PIPE_8BPC; + pipe_bpp); pipe_bpp = 24; - break; } - intel_crtc->bpp = pipe_bpp; - I915_WRITE(PIPECONF(pipe), temp); if (!lane) { /* @@ -4799,12 +4896,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, else dpll |= PLL_REF_INPUT_DREFCLK; - /* setup pipeconf */ - pipeconf = I915_READ(PIPECONF(pipe)); - - /* Set up the display plane register */ - dspcntr = DISPPLANE_GAMMA_ENABLE; - DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe); drm_mode_debug_printmodeline(mode); @@ -4864,12 +4955,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(PCH_LVDS, temp); } - pipeconf &= ~PIPECONF_DITHER_EN; - pipeconf &= ~PIPECONF_DITHER_TYPE_MASK; - if ((is_lvds && dev_priv->lvds_dither) || dither) { - pipeconf |= PIPECONF_DITHER_EN; - pipeconf |= PIPECONF_DITHER_TYPE_SP; - } if (is_dp && !is_cpu_edp) { intel_dp_set_m_n(crtc, mode, adjusted_mode); } else { @@ -4905,9 +4990,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, } } - pipeconf &= ~PIPECONF_INTERLACE_MASK; if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { - pipeconf |= PIPECONF_INTERLACED_ILK; /* the chip adds 2 halflines automatically */ adjusted_mode->crtc_vtotal -= 1; adjusted_mode->crtc_vblank_end -= 1; @@ -4915,7 +4998,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, adjusted_mode->crtc_hsync_start - adjusted_mode->crtc_htotal/2); } else { - pipeconf |= PIPECONF_PROGRESSIVE; I915_WRITE(VSYNCSHIFT(pipe), 0); } @@ -4953,15 +5035,15 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, if (is_cpu_edp) ironlake_set_pll_edp(crtc, adjusted_mode->clock); - I915_WRITE(PIPECONF(pipe), pipeconf); - POSTING_READ(PIPECONF(pipe)); + ironlake_set_pipeconf(crtc, adjusted_mode, dither); intel_wait_for_vblank(dev, pipe); - I915_WRITE(DSPCNTR(plane), dspcntr); + /* Set up the display plane register */ + I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE); POSTING_READ(DSPCNTR(plane)); - ret = intel_pipe_set_base(crtc, x, y, old_fb); + ret = intel_pipe_set_base(crtc, x, y, fb); intel_update_watermarks(dev); @@ -4974,7 +5056,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, int x, int y, - struct drm_framebuffer *old_fb) + struct drm_framebuffer *fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -4985,14 +5067,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, drm_vblank_pre_modeset(dev, pipe); ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode, - x, y, old_fb); + x, y, fb); drm_vblank_post_modeset(dev, pipe); - if (ret) - intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF; - else - intel_crtc->dpms_mode = DRM_MODE_DPMS_ON; - return ret; } @@ -5065,6 +5142,91 @@ static void g4x_write_eld(struct drm_connector *connector, I915_WRITE(G4X_AUD_CNTL_ST, i); } +static void haswell_write_eld(struct drm_connector *connector, + struct drm_crtc *crtc) +{ + struct drm_i915_private *dev_priv = connector->dev->dev_private; + uint8_t *eld = connector->eld; + struct drm_device *dev = crtc->dev; + uint32_t eldv; + uint32_t i; + int len; + int pipe = to_intel_crtc(crtc)->pipe; + int tmp; + + int hdmiw_hdmiedid = HSW_AUD_EDID_DATA(pipe); + int aud_cntl_st = HSW_AUD_DIP_ELD_CTRL(pipe); + int aud_config = HSW_AUD_CFG(pipe); + int aud_cntrl_st2 = HSW_AUD_PIN_ELD_CP_VLD; + + + DRM_DEBUG_DRIVER("HDMI: Haswell Audio initialize....\n"); + + /* Audio output enable */ + DRM_DEBUG_DRIVER("HDMI audio: enable codec\n"); + tmp = I915_READ(aud_cntrl_st2); + tmp |= (AUDIO_OUTPUT_ENABLE_A << (pipe * 4)); + I915_WRITE(aud_cntrl_st2, tmp); + + /* Wait for 1 vertical blank */ + intel_wait_for_vblank(dev, pipe); + + /* Set ELD valid state */ + tmp = I915_READ(aud_cntrl_st2); + DRM_DEBUG_DRIVER("HDMI audio: pin eld vld status=0x%8x\n", tmp); + tmp |= (AUDIO_ELD_VALID_A << (pipe * 4)); + I915_WRITE(aud_cntrl_st2, tmp); + tmp = I915_READ(aud_cntrl_st2); + DRM_DEBUG_DRIVER("HDMI audio: eld vld status=0x%8x\n", tmp); + + /* Enable HDMI mode */ + tmp = I915_READ(aud_config); + DRM_DEBUG_DRIVER("HDMI audio: audio conf: 0x%8x\n", tmp); + /* clear N_programing_enable and N_value_index */ + tmp &= ~(AUD_CONFIG_N_VALUE_INDEX | AUD_CONFIG_N_PROG_ENABLE); + I915_WRITE(aud_config, tmp); + + DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe)); + + eldv = AUDIO_ELD_VALID_A << (pipe * 4); + + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { + DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n"); + eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */ + I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */ + } else + I915_WRITE(aud_config, 0); + + if (intel_eld_uptodate(connector, + aud_cntrl_st2, eldv, + aud_cntl_st, IBX_ELD_ADDRESS, + hdmiw_hdmiedid)) + return; + + i = I915_READ(aud_cntrl_st2); + i &= ~eldv; + I915_WRITE(aud_cntrl_st2, i); + + if (!eld[0]) + return; + + i = I915_READ(aud_cntl_st); + i &= ~IBX_ELD_ADDRESS; + I915_WRITE(aud_cntl_st, i); + i = (i >> 29) & DIP_PORT_SEL_MASK; /* DIP_Port_Select, 0x1 = PortB */ + DRM_DEBUG_DRIVER("port num:%d\n", i); + + len = min_t(uint8_t, eld[2], 21); /* 84 bytes of hw ELD buffer */ + DRM_DEBUG_DRIVER("ELD size %d\n", len); + for (i = 0; i < len; i++) + I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i)); + + i = I915_READ(aud_cntrl_st2); + i |= eldv; + I915_WRITE(aud_cntrl_st2, i); + +} + static void ironlake_write_eld(struct drm_connector *connector, struct drm_crtc *crtc) { @@ -5077,28 +5239,24 @@ static void ironlake_write_eld(struct drm_connector *connector, int aud_config; int aud_cntl_st; int aud_cntrl_st2; + int pipe = to_intel_crtc(crtc)->pipe; if (HAS_PCH_IBX(connector->dev)) { - hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID_A; - aud_config = IBX_AUD_CONFIG_A; - aud_cntl_st = IBX_AUD_CNTL_ST_A; + hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID(pipe); + aud_config = IBX_AUD_CFG(pipe); + aud_cntl_st = IBX_AUD_CNTL_ST(pipe); aud_cntrl_st2 = IBX_AUD_CNTL_ST2; } else { - hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID_A; - aud_config = CPT_AUD_CONFIG_A; - aud_cntl_st = CPT_AUD_CNTL_ST_A; + hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID(pipe); + aud_config = CPT_AUD_CFG(pipe); + aud_cntl_st = CPT_AUD_CNTL_ST(pipe); aud_cntrl_st2 = CPT_AUD_CNTRL_ST2; } - i = to_intel_crtc(crtc)->pipe; - hdmiw_hdmiedid += i * 0x100; - aud_cntl_st += i * 0x100; - aud_config += i * 0x100; - - DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(i)); + DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe)); i = I915_READ(aud_cntl_st); - i = (i >> 29) & 0x3; /* DIP_Port_Select, 0x1 = PortB */ + i = (i >> 29) & DIP_PORT_SEL_MASK; /* DIP_Port_Select, 0x1 = PortB */ if (!i) { DRM_DEBUG_DRIVER("Audio directed to unknown port\n"); /* operate blindly on all ports */ @@ -5345,8 +5503,6 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, uint32_t addr; int ret; - DRM_DEBUG_KMS("\n"); - /* if we want to turn off the cursor ignore width and height */ if (!handle) { DRM_DEBUG_KMS("cursor off\n"); @@ -5592,17 +5748,18 @@ mode_fits_in_fbdev(struct drm_device *dev, return fb; } -bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder, - struct drm_connector *connector, +bool intel_get_load_detect_pipe(struct drm_connector *connector, struct drm_display_mode *mode, struct intel_load_detect_pipe *old) { struct intel_crtc *intel_crtc; + struct intel_encoder *intel_encoder = + intel_attached_encoder(connector); struct drm_crtc *possible_crtc; struct drm_encoder *encoder = &intel_encoder->base; struct drm_crtc *crtc = NULL; struct drm_device *dev = encoder->dev; - struct drm_framebuffer *old_fb; + struct drm_framebuffer *fb; int i = -1; DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", @@ -5623,21 +5780,12 @@ bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder, if (encoder->crtc) { crtc = encoder->crtc; - intel_crtc = to_intel_crtc(crtc); - old->dpms_mode = intel_crtc->dpms_mode; + old->dpms_mode = connector->dpms; old->load_detect_temp = false; /* Make sure the crtc and connector are running */ - if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) { - struct drm_encoder_helper_funcs *encoder_funcs; - struct drm_crtc_helper_funcs *crtc_funcs; - - crtc_funcs = crtc->helper_private; - crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); - - encoder_funcs = encoder->helper_private; - encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); - } + if (connector->dpms != DRM_MODE_DPMS_ON) + connector->funcs->dpms(connector, DRM_MODE_DPMS_ON); return true; } @@ -5661,19 +5809,17 @@ bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder, return false; } - encoder->crtc = crtc; - connector->encoder = encoder; + intel_encoder->new_crtc = to_intel_crtc(crtc); + to_intel_connector(connector)->new_encoder = intel_encoder; intel_crtc = to_intel_crtc(crtc); - old->dpms_mode = intel_crtc->dpms_mode; + old->dpms_mode = connector->dpms; old->load_detect_temp = true; old->release_fb = NULL; if (!mode) mode = &load_detect_mode; - old_fb = crtc->fb; - /* We need a framebuffer large enough to accommodate all accesses * that the plane may generate whilst we perform load detection. * We can not rely on the fbcon either being present (we get called @@ -5681,50 +5827,52 @@ bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder, * not even exist) or that it is large enough to satisfy the * requested mode. */ - crtc->fb = mode_fits_in_fbdev(dev, mode); - if (crtc->fb == NULL) { + fb = mode_fits_in_fbdev(dev, mode); + if (fb == NULL) { DRM_DEBUG_KMS("creating tmp fb for load-detection\n"); - crtc->fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32); - old->release_fb = crtc->fb; + fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32); + old->release_fb = fb; } else DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n"); - if (IS_ERR(crtc->fb)) { + if (IS_ERR(fb)) { DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n"); - crtc->fb = old_fb; - return false; + goto fail; } - if (!drm_crtc_helper_set_mode(crtc, mode, 0, 0, old_fb)) { + if (!intel_set_mode(crtc, mode, 0, 0, fb)) { DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n"); if (old->release_fb) old->release_fb->funcs->destroy(old->release_fb); - crtc->fb = old_fb; - return false; + goto fail; } /* let the connector get through one full cycle before testing */ intel_wait_for_vblank(dev, intel_crtc->pipe); return true; +fail: + connector->encoder = NULL; + encoder->crtc = NULL; + return false; } -void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder, - struct drm_connector *connector, +void intel_release_load_detect_pipe(struct drm_connector *connector, struct intel_load_detect_pipe *old) { + struct intel_encoder *intel_encoder = + intel_attached_encoder(connector); struct drm_encoder *encoder = &intel_encoder->base; - struct drm_device *dev = encoder->dev; - struct drm_crtc *crtc = encoder->crtc; - struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; - struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", connector->base.id, drm_get_connector_name(connector), encoder->base.id, drm_get_encoder_name(encoder)); if (old->load_detect_temp) { - connector->encoder = NULL; - drm_helper_disable_unused_functions(dev); + struct drm_crtc *crtc = encoder->crtc; + + to_intel_connector(connector)->new_encoder = NULL; + intel_encoder->new_crtc = NULL; + intel_set_mode(crtc, NULL, 0, 0, NULL); if (old->release_fb) old->release_fb->funcs->destroy(old->release_fb); @@ -5733,10 +5881,8 @@ void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder, } /* Switch crtc and encoder back off if necessary */ - if (old->dpms_mode != DRM_MODE_DPMS_ON) { - encoder_funcs->dpms(encoder, old->dpms_mode); - crtc_funcs->dpms(crtc, old->dpms_mode); - } + if (old->dpms_mode != DRM_MODE_DPMS_ON) + connector->funcs->dpms(connector, old->dpms_mode); } /* Returns the clock of the currently programmed mode of the given pipe. */ @@ -5858,46 +6004,6 @@ struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev, return mode; } -#define GPU_IDLE_TIMEOUT 500 /* ms */ - -/* When this timer fires, we've been idle for awhile */ -static void intel_gpu_idle_timer(unsigned long arg) -{ - struct drm_device *dev = (struct drm_device *)arg; - drm_i915_private_t *dev_priv = dev->dev_private; - - if (!list_empty(&dev_priv->mm.active_list)) { - /* Still processing requests, so just re-arm the timer. */ - mod_timer(&dev_priv->idle_timer, jiffies + - msecs_to_jiffies(GPU_IDLE_TIMEOUT)); - return; - } - - dev_priv->busy = false; - queue_work(dev_priv->wq, &dev_priv->idle_work); -} - -#define CRTC_IDLE_TIMEOUT 1000 /* ms */ - -static void intel_crtc_idle_timer(unsigned long arg) -{ - struct intel_crtc *intel_crtc = (struct intel_crtc *)arg; - struct drm_crtc *crtc = &intel_crtc->base; - drm_i915_private_t *dev_priv = crtc->dev->dev_private; - struct intel_framebuffer *intel_fb; - - intel_fb = to_intel_framebuffer(crtc->fb); - if (intel_fb && intel_fb->obj->active) { - /* The framebuffer is still being accessed by the GPU. */ - mod_timer(&intel_crtc->idle_timer, jiffies + - msecs_to_jiffies(CRTC_IDLE_TIMEOUT)); - return; - } - - intel_crtc->busy = false; - queue_work(dev_priv->wq, &dev_priv->idle_work); -} - static void intel_increase_pllclock(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; @@ -5927,10 +6033,6 @@ static void intel_increase_pllclock(struct drm_crtc *crtc) if (dpll & DISPLAY_RATE_SELECT_FPA1) DRM_DEBUG_DRIVER("failed to upclock LVDS!\n"); } - - /* Schedule downclock */ - mod_timer(&intel_crtc->idle_timer, jiffies + - msecs_to_jiffies(CRTC_IDLE_TIMEOUT)); } static void intel_decrease_pllclock(struct drm_crtc *crtc) @@ -5969,89 +6071,46 @@ static void intel_decrease_pllclock(struct drm_crtc *crtc) } -/** - * intel_idle_update - adjust clocks for idleness - * @work: work struct - * - * Either the GPU or display (or both) went idle. Check the busy status - * here and adjust the CRTC and GPU clocks as necessary. - */ -static void intel_idle_update(struct work_struct *work) +void intel_mark_busy(struct drm_device *dev) +{ + i915_update_gfx_val(dev->dev_private); +} + +void intel_mark_idle(struct drm_device *dev) +{ +} + +void intel_mark_fb_busy(struct drm_i915_gem_object *obj) { - drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, - idle_work); - struct drm_device *dev = dev_priv->dev; + struct drm_device *dev = obj->base.dev; struct drm_crtc *crtc; - struct intel_crtc *intel_crtc; if (!i915_powersave) return; - mutex_lock(&dev->struct_mutex); - - i915_update_gfx_val(dev_priv); - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { - /* Skip inactive CRTCs */ if (!crtc->fb) continue; - intel_crtc = to_intel_crtc(crtc); - if (!intel_crtc->busy) - intel_decrease_pllclock(crtc); + if (to_intel_framebuffer(crtc->fb)->obj == obj) + intel_increase_pllclock(crtc); } - - - mutex_unlock(&dev->struct_mutex); } -/** - * intel_mark_busy - mark the GPU and possibly the display busy - * @dev: drm device - * @obj: object we're operating on - * - * Callers can use this function to indicate that the GPU is busy processing - * commands. If @obj matches one of the CRTC objects (i.e. it's a scanout - * buffer), we'll also mark the display as busy, so we know to increase its - * clock frequency. - */ -void intel_mark_busy(struct drm_device *dev, struct drm_i915_gem_object *obj) +void intel_mark_fb_idle(struct drm_i915_gem_object *obj) { - drm_i915_private_t *dev_priv = dev->dev_private; - struct drm_crtc *crtc = NULL; - struct intel_framebuffer *intel_fb; - struct intel_crtc *intel_crtc; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return; - - if (!dev_priv->busy) { - intel_sanitize_pm(dev); - dev_priv->busy = true; - } else - mod_timer(&dev_priv->idle_timer, jiffies + - msecs_to_jiffies(GPU_IDLE_TIMEOUT)); + struct drm_device *dev = obj->base.dev; + struct drm_crtc *crtc; - if (obj == NULL) + if (!i915_powersave) return; list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { if (!crtc->fb) continue; - intel_crtc = to_intel_crtc(crtc); - intel_fb = to_intel_framebuffer(crtc->fb); - if (intel_fb->obj == obj) { - if (!intel_crtc->busy) { - /* Non-busy -> busy, upclock */ - intel_increase_pllclock(crtc); - intel_crtc->busy = true; - } else { - /* Busy -> busy, put off timer */ - mod_timer(&intel_crtc->idle_timer, jiffies + - msecs_to_jiffies(CRTC_IDLE_TIMEOUT)); - } - } + if (to_intel_framebuffer(crtc->fb)->obj == obj) + intel_decrease_pllclock(crtc); } } @@ -6402,7 +6461,7 @@ static int intel_gen7_queue_flip(struct drm_device *dev, default: WARN_ONCE(1, "unknown plane in flip command\n"); ret = -ENODEV; - goto err; + goto err_unpin; } ret = intel_ring_begin(ring, 4); @@ -6510,7 +6569,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, goto cleanup_pending; intel_disable_fbc(dev); - intel_mark_busy(dev, obj); + intel_mark_fb_busy(obj); mutex_unlock(&dev->struct_mutex); trace_i915_flip_request(intel_crtc->plane, obj); @@ -6535,81 +6594,807 @@ free_work: return ret; } -static void intel_sanitize_modesetting(struct drm_device *dev, - int pipe, int plane) +static struct drm_crtc_helper_funcs intel_helper_funcs = { + .mode_set_base_atomic = intel_pipe_set_base_atomic, + .load_lut = intel_crtc_load_lut, + .disable = intel_crtc_noop, +}; + +bool intel_encoder_check_is_cloned(struct intel_encoder *encoder) { - struct drm_i915_private *dev_priv = dev->dev_private; - u32 reg, val; - int i; + struct intel_encoder *other_encoder; + struct drm_crtc *crtc = &encoder->new_crtc->base; - /* Clear any frame start delays used for debugging left by the BIOS */ - for_each_pipe(i) { - reg = PIPECONF(i); - I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK); + if (WARN_ON(!crtc)) + return false; + + list_for_each_entry(other_encoder, + &crtc->dev->mode_config.encoder_list, + base.head) { + + if (&other_encoder->new_crtc->base != crtc || + encoder == other_encoder) + continue; + else + return true; } - if (HAS_PCH_SPLIT(dev)) - return; + return false; +} - /* Who knows what state these registers were left in by the BIOS or - * grub? - * - * If we leave the registers in a conflicting state (e.g. with the - * display plane reading from the other pipe than the one we intend - * to use) then when we attempt to teardown the active mode, we will - * not disable the pipes and planes in the correct order -- leaving - * a plane reading from a disabled pipe and possibly leading to - * undefined behaviour. +static bool intel_encoder_crtc_ok(struct drm_encoder *encoder, + struct drm_crtc *crtc) +{ + struct drm_device *dev; + struct drm_crtc *tmp; + int crtc_mask = 1; + + WARN(!crtc, "checking null crtc?\n"); + + dev = crtc->dev; + + list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) { + if (tmp == crtc) + break; + crtc_mask <<= 1; + } + + if (encoder->possible_crtcs & crtc_mask) + return true; + return false; +} + +/** + * intel_modeset_update_staged_output_state + * + * Updates the staged output configuration state, e.g. after we've read out the + * current hw state. + */ +static void intel_modeset_update_staged_output_state(struct drm_device *dev) +{ + struct intel_encoder *encoder; + struct intel_connector *connector; + + list_for_each_entry(connector, &dev->mode_config.connector_list, + base.head) { + connector->new_encoder = + to_intel_encoder(connector->base.encoder); + } + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + encoder->new_crtc = + to_intel_crtc(encoder->base.crtc); + } +} + +/** + * intel_modeset_commit_output_state + * + * This function copies the stage display pipe configuration to the real one. + */ +static void intel_modeset_commit_output_state(struct drm_device *dev) +{ + struct intel_encoder *encoder; + struct intel_connector *connector; + + list_for_each_entry(connector, &dev->mode_config.connector_list, + base.head) { + connector->base.encoder = &connector->new_encoder->base; + } + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + encoder->base.crtc = &encoder->new_crtc->base; + } +} + +static struct drm_display_mode * +intel_modeset_adjusted_mode(struct drm_crtc *crtc, + struct drm_display_mode *mode) +{ + struct drm_device *dev = crtc->dev; + struct drm_display_mode *adjusted_mode; + struct drm_encoder_helper_funcs *encoder_funcs; + struct intel_encoder *encoder; + + adjusted_mode = drm_mode_duplicate(dev, mode); + if (!adjusted_mode) + return ERR_PTR(-ENOMEM); + + /* Pass our mode to the connectors and the CRTC to give them a chance to + * adjust it according to limitations or connector properties, and also + * a chance to reject the mode entirely. */ + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { - reg = DSPCNTR(plane); - val = I915_READ(reg); + if (&encoder->new_crtc->base != crtc) + continue; + encoder_funcs = encoder->base.helper_private; + if (!(encoder_funcs->mode_fixup(&encoder->base, mode, + adjusted_mode))) { + DRM_DEBUG_KMS("Encoder fixup failed\n"); + goto fail; + } + } - if ((val & DISPLAY_PLANE_ENABLE) == 0) - return; - if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe) - return; + if (!(intel_crtc_mode_fixup(crtc, mode, adjusted_mode))) { + DRM_DEBUG_KMS("CRTC fixup failed\n"); + goto fail; + } + DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id); - /* This display plane is active and attached to the other CPU pipe. */ - pipe = !pipe; + return adjusted_mode; +fail: + drm_mode_destroy(dev, adjusted_mode); + return ERR_PTR(-EINVAL); +} - /* Disable the plane and wait for it to stop reading from the pipe. */ - intel_disable_plane(dev_priv, plane, pipe); - intel_disable_pipe(dev_priv, pipe); +/* Computes which crtcs are affected and sets the relevant bits in the mask. For + * simplicity we use the crtc's pipe number (because it's easier to obtain). */ +static void +intel_modeset_affected_pipes(struct drm_crtc *crtc, unsigned *modeset_pipes, + unsigned *prepare_pipes, unsigned *disable_pipes) +{ + struct intel_crtc *intel_crtc; + struct drm_device *dev = crtc->dev; + struct intel_encoder *encoder; + struct intel_connector *connector; + struct drm_crtc *tmp_crtc; + + *disable_pipes = *modeset_pipes = *prepare_pipes = 0; + + /* Check which crtcs have changed outputs connected to them, these need + * to be part of the prepare_pipes mask. We don't (yet) support global + * modeset across multiple crtcs, so modeset_pipes will only have one + * bit set at most. */ + list_for_each_entry(connector, &dev->mode_config.connector_list, + base.head) { + if (connector->base.encoder == &connector->new_encoder->base) + continue; + + if (connector->base.encoder) { + tmp_crtc = connector->base.encoder->crtc; + + *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe; + } + + if (connector->new_encoder) + *prepare_pipes |= + 1 << connector->new_encoder->new_crtc->pipe; + } + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + if (encoder->base.crtc == &encoder->new_crtc->base) + continue; + + if (encoder->base.crtc) { + tmp_crtc = encoder->base.crtc; + + *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe; + } + + if (encoder->new_crtc) + *prepare_pipes |= 1 << encoder->new_crtc->pipe; + } + + /* Check for any pipes that will be fully disabled ... */ + list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, + base.head) { + bool used = false; + + /* Don't try to disable disabled crtcs. */ + if (!intel_crtc->base.enabled) + continue; + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + if (encoder->new_crtc == intel_crtc) + used = true; + } + + if (!used) + *disable_pipes |= 1 << intel_crtc->pipe; + } + + + /* set_mode is also used to update properties on life display pipes. */ + intel_crtc = to_intel_crtc(crtc); + if (crtc->enabled) + *prepare_pipes |= 1 << intel_crtc->pipe; + + /* We only support modeset on one single crtc, hence we need to do that + * only for the passed in crtc iff we change anything else than just + * disable crtcs. + * + * This is actually not true, to be fully compatible with the old crtc + * helper we automatically disable _any_ output (i.e. doesn't need to be + * connected to the crtc we're modesetting on) if it's disconnected. + * Which is a rather nutty api (since changed the output configuration + * without userspace's explicit request can lead to confusion), but + * alas. Hence we currently need to modeset on all pipes we prepare. */ + if (*prepare_pipes) + *modeset_pipes = *prepare_pipes; + + /* ... and mask these out. */ + *modeset_pipes &= ~(*disable_pipes); + *prepare_pipes &= ~(*disable_pipes); } -static void intel_crtc_reset(struct drm_crtc *crtc) +static bool intel_crtc_in_use(struct drm_crtc *crtc) { + struct drm_encoder *encoder; struct drm_device *dev = crtc->dev; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - /* Reset flags back to the 'unknown' status so that they - * will be correctly set on the initial modeset. + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) + if (encoder->crtc == crtc) + return true; + + return false; +} + +static void +intel_modeset_update_state(struct drm_device *dev, unsigned prepare_pipes) +{ + struct intel_encoder *intel_encoder; + struct intel_crtc *intel_crtc; + struct drm_connector *connector; + + list_for_each_entry(intel_encoder, &dev->mode_config.encoder_list, + base.head) { + if (!intel_encoder->base.crtc) + continue; + + intel_crtc = to_intel_crtc(intel_encoder->base.crtc); + + if (prepare_pipes & (1 << intel_crtc->pipe)) + intel_encoder->connectors_active = false; + } + + intel_modeset_commit_output_state(dev); + + /* Update computed state. */ + list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, + base.head) { + intel_crtc->base.enabled = intel_crtc_in_use(&intel_crtc->base); + } + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + if (!connector->encoder || !connector->encoder->crtc) + continue; + + intel_crtc = to_intel_crtc(connector->encoder->crtc); + + if (prepare_pipes & (1 << intel_crtc->pipe)) { + struct drm_property *dpms_property = + dev->mode_config.dpms_property; + + connector->dpms = DRM_MODE_DPMS_ON; + drm_connector_property_set_value(connector, + dpms_property, + DRM_MODE_DPMS_ON); + + intel_encoder = to_intel_encoder(connector->encoder); + intel_encoder->connectors_active = true; + } + } + +} + +#define for_each_intel_crtc_masked(dev, mask, intel_crtc) \ + list_for_each_entry((intel_crtc), \ + &(dev)->mode_config.crtc_list, \ + base.head) \ + if (mask & (1 <<(intel_crtc)->pipe)) \ + +void +intel_modeset_check_state(struct drm_device *dev) +{ + struct intel_crtc *crtc; + struct intel_encoder *encoder; + struct intel_connector *connector; + + list_for_each_entry(connector, &dev->mode_config.connector_list, + base.head) { + /* This also checks the encoder/connector hw state with the + * ->get_hw_state callbacks. */ + intel_connector_check_state(connector); + + WARN(&connector->new_encoder->base != connector->base.encoder, + "connector's staged encoder doesn't match current encoder\n"); + } + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + bool enabled = false; + bool active = false; + enum pipe pipe, tracked_pipe; + + DRM_DEBUG_KMS("[ENCODER:%d:%s]\n", + encoder->base.base.id, + drm_get_encoder_name(&encoder->base)); + + WARN(&encoder->new_crtc->base != encoder->base.crtc, + "encoder's stage crtc doesn't match current crtc\n"); + WARN(encoder->connectors_active && !encoder->base.crtc, + "encoder's active_connectors set, but no crtc\n"); + + list_for_each_entry(connector, &dev->mode_config.connector_list, + base.head) { + if (connector->base.encoder != &encoder->base) + continue; + enabled = true; + if (connector->base.dpms != DRM_MODE_DPMS_OFF) + active = true; + } + WARN(!!encoder->base.crtc != enabled, + "encoder's enabled state mismatch " + "(expected %i, found %i)\n", + !!encoder->base.crtc, enabled); + WARN(active && !encoder->base.crtc, + "active encoder with no crtc\n"); + + WARN(encoder->connectors_active != active, + "encoder's computed active state doesn't match tracked active state " + "(expected %i, found %i)\n", active, encoder->connectors_active); + + active = encoder->get_hw_state(encoder, &pipe); + WARN(active != encoder->connectors_active, + "encoder's hw state doesn't match sw tracking " + "(expected %i, found %i)\n", + encoder->connectors_active, active); + + if (!encoder->base.crtc) + continue; + + tracked_pipe = to_intel_crtc(encoder->base.crtc)->pipe; + WARN(active && pipe != tracked_pipe, + "active encoder's pipe doesn't match" + "(expected %i, found %i)\n", + tracked_pipe, pipe); + + } + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, + base.head) { + bool enabled = false; + bool active = false; + + DRM_DEBUG_KMS("[CRTC:%d]\n", + crtc->base.base.id); + + WARN(crtc->active && !crtc->base.enabled, + "active crtc, but not enabled in sw tracking\n"); + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + if (encoder->base.crtc != &crtc->base) + continue; + enabled = true; + if (encoder->connectors_active) + active = true; + } + WARN(active != crtc->active, + "crtc's computed active state doesn't match tracked active state " + "(expected %i, found %i)\n", active, crtc->active); + WARN(enabled != crtc->base.enabled, + "crtc's computed enabled state doesn't match tracked enabled state " + "(expected %i, found %i)\n", enabled, crtc->base.enabled); + + assert_pipe(dev->dev_private, crtc->pipe, crtc->active); + } +} + +bool intel_set_mode(struct drm_crtc *crtc, + struct drm_display_mode *mode, + int x, int y, struct drm_framebuffer *fb) +{ + struct drm_device *dev = crtc->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_display_mode *adjusted_mode, saved_mode, saved_hwmode; + struct drm_encoder_helper_funcs *encoder_funcs; + struct drm_encoder *encoder; + struct intel_crtc *intel_crtc; + unsigned disable_pipes, prepare_pipes, modeset_pipes; + bool ret = true; + + intel_modeset_affected_pipes(crtc, &modeset_pipes, + &prepare_pipes, &disable_pipes); + + DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n", + modeset_pipes, prepare_pipes, disable_pipes); + + for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc) + intel_crtc_disable(&intel_crtc->base); + + saved_hwmode = crtc->hwmode; + saved_mode = crtc->mode; + + /* Hack: Because we don't (yet) support global modeset on multiple + * crtcs, we don't keep track of the new mode for more than one crtc. + * Hence simply check whether any bit is set in modeset_pipes in all the + * pieces of code that are not yet converted to deal with mutliple crtcs + * changing their mode at the same time. */ + adjusted_mode = NULL; + if (modeset_pipes) { + adjusted_mode = intel_modeset_adjusted_mode(crtc, mode); + if (IS_ERR(adjusted_mode)) { + return false; + } + } + + for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) { + if (intel_crtc->base.enabled) + dev_priv->display.crtc_disable(&intel_crtc->base); + } + + /* crtc->mode is already used by the ->mode_set callbacks, hence we need + * to set it here already despite that we pass it down the callchain. */ - intel_crtc->dpms_mode = -1; + if (modeset_pipes) + crtc->mode = *mode; + + /* Only after disabling all output pipelines that will be changed can we + * update the the output configuration. */ + intel_modeset_update_state(dev, prepare_pipes); + + /* Set up the DPLL and any encoders state that needs to adjust or depend + * on the DPLL. + */ + for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) { + ret = !intel_crtc_mode_set(&intel_crtc->base, + mode, adjusted_mode, + x, y, fb); + if (!ret) + goto done; + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + + if (encoder->crtc != &intel_crtc->base) + continue; + + DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n", + encoder->base.id, drm_get_encoder_name(encoder), + mode->base.id, mode->name); + encoder_funcs = encoder->helper_private; + encoder_funcs->mode_set(encoder, mode, adjusted_mode); + } + } + + /* Now enable the clocks, plane, pipe, and connectors that we set up. */ + for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) + dev_priv->display.crtc_enable(&intel_crtc->base); + + if (modeset_pipes) { + /* Store real post-adjustment hardware mode. */ + crtc->hwmode = *adjusted_mode; + + /* Calculate and store various constants which + * are later needed by vblank and swap-completion + * timestamping. They are derived from true hwmode. + */ + drm_calc_timestamping_constants(crtc); + } + + /* FIXME: add subpixel order */ +done: + drm_mode_destroy(dev, adjusted_mode); + if (!ret && crtc->enabled) { + crtc->hwmode = saved_hwmode; + crtc->mode = saved_mode; + } else { + intel_modeset_check_state(dev); + } + + return ret; +} + +#undef for_each_intel_crtc_masked - /* We need to fix up any BIOS configuration that conflicts with - * our expectations. +static void intel_set_config_free(struct intel_set_config *config) +{ + if (!config) + return; + + kfree(config->save_connector_encoders); + kfree(config->save_encoder_crtcs); + kfree(config); +} + +static int intel_set_config_save_state(struct drm_device *dev, + struct intel_set_config *config) +{ + struct drm_encoder *encoder; + struct drm_connector *connector; + int count; + + config->save_encoder_crtcs = + kcalloc(dev->mode_config.num_encoder, + sizeof(struct drm_crtc *), GFP_KERNEL); + if (!config->save_encoder_crtcs) + return -ENOMEM; + + config->save_connector_encoders = + kcalloc(dev->mode_config.num_connector, + sizeof(struct drm_encoder *), GFP_KERNEL); + if (!config->save_connector_encoders) + return -ENOMEM; + + /* Copy data. Note that driver private data is not affected. + * Should anything bad happen only the expected state is + * restored, not the drivers personal bookkeeping. */ - intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane); + count = 0; + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + config->save_encoder_crtcs[count++] = encoder->crtc; + } + + count = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + config->save_connector_encoders[count++] = connector->encoder; + } + + return 0; } -static struct drm_crtc_helper_funcs intel_helper_funcs = { - .dpms = intel_crtc_dpms, - .mode_fixup = intel_crtc_mode_fixup, - .mode_set = intel_crtc_mode_set, - .mode_set_base = intel_pipe_set_base, - .mode_set_base_atomic = intel_pipe_set_base_atomic, - .load_lut = intel_crtc_load_lut, - .disable = intel_crtc_disable, -}; +static void intel_set_config_restore_state(struct drm_device *dev, + struct intel_set_config *config) +{ + struct intel_encoder *encoder; + struct intel_connector *connector; + int count; + + count = 0; + list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { + encoder->new_crtc = + to_intel_crtc(config->save_encoder_crtcs[count++]); + } + + count = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, base.head) { + connector->new_encoder = + to_intel_encoder(config->save_connector_encoders[count++]); + } +} + +static void +intel_set_config_compute_mode_changes(struct drm_mode_set *set, + struct intel_set_config *config) +{ + + /* We should be able to check here if the fb has the same properties + * and then just flip_or_move it */ + if (set->crtc->fb != set->fb) { + /* If we have no fb then treat it as a full mode set */ + if (set->crtc->fb == NULL) { + DRM_DEBUG_KMS("crtc has no fb, full mode set\n"); + config->mode_changed = true; + } else if (set->fb == NULL) { + config->mode_changed = true; + } else if (set->fb->depth != set->crtc->fb->depth) { + config->mode_changed = true; + } else if (set->fb->bits_per_pixel != + set->crtc->fb->bits_per_pixel) { + config->mode_changed = true; + } else + config->fb_changed = true; + } + + if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y)) + config->fb_changed = true; + + if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) { + DRM_DEBUG_KMS("modes are different, full mode set\n"); + drm_mode_debug_printmodeline(&set->crtc->mode); + drm_mode_debug_printmodeline(set->mode); + config->mode_changed = true; + } +} + +static int +intel_modeset_stage_output_state(struct drm_device *dev, + struct drm_mode_set *set, + struct intel_set_config *config) +{ + struct drm_crtc *new_crtc; + struct intel_connector *connector; + struct intel_encoder *encoder; + int count, ro; + + /* The upper layers ensure that we either disabl a crtc or have a list + * of connectors. For paranoia, double-check this. */ + WARN_ON(!set->fb && (set->num_connectors != 0)); + WARN_ON(set->fb && (set->num_connectors == 0)); + + count = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, + base.head) { + /* Otherwise traverse passed in connector list and get encoders + * for them. */ + for (ro = 0; ro < set->num_connectors; ro++) { + if (set->connectors[ro] == &connector->base) { + connector->new_encoder = connector->encoder; + break; + } + } + + /* If we disable the crtc, disable all its connectors. Also, if + * the connector is on the changing crtc but not on the new + * connector list, disable it. */ + if ((!set->fb || ro == set->num_connectors) && + connector->base.encoder && + connector->base.encoder->crtc == set->crtc) { + connector->new_encoder = NULL; + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n", + connector->base.base.id, + drm_get_connector_name(&connector->base)); + } + + + if (&connector->new_encoder->base != connector->base.encoder) { + DRM_DEBUG_KMS("encoder changed, full mode switch\n"); + config->mode_changed = true; + } + + /* Disable all disconnected encoders. */ + if (connector->base.status == connector_status_disconnected) + connector->new_encoder = NULL; + } + /* connector->new_encoder is now updated for all connectors. */ + + /* Update crtc of enabled connectors. */ + count = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, + base.head) { + if (!connector->new_encoder) + continue; + + new_crtc = connector->new_encoder->base.crtc; + + for (ro = 0; ro < set->num_connectors; ro++) { + if (set->connectors[ro] == &connector->base) + new_crtc = set->crtc; + } + + /* Make sure the new CRTC will work with the encoder */ + if (!intel_encoder_crtc_ok(&connector->new_encoder->base, + new_crtc)) { + return -EINVAL; + } + connector->encoder->new_crtc = to_intel_crtc(new_crtc); + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n", + connector->base.base.id, + drm_get_connector_name(&connector->base), + new_crtc->base.id); + } + + /* Check for any encoders that needs to be disabled. */ + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + list_for_each_entry(connector, + &dev->mode_config.connector_list, + base.head) { + if (connector->new_encoder == encoder) { + WARN_ON(!connector->new_encoder->new_crtc); + + goto next_encoder; + } + } + encoder->new_crtc = NULL; +next_encoder: + /* Only now check for crtc changes so we don't miss encoders + * that will be disabled. */ + if (&encoder->new_crtc->base != encoder->base.crtc) { + DRM_DEBUG_KMS("crtc changed, full mode switch\n"); + config->mode_changed = true; + } + } + /* Now we've also updated encoder->new_crtc for all encoders. */ + + return 0; +} + +static int intel_crtc_set_config(struct drm_mode_set *set) +{ + struct drm_device *dev; + struct drm_mode_set save_set; + struct intel_set_config *config; + int ret; + + BUG_ON(!set); + BUG_ON(!set->crtc); + BUG_ON(!set->crtc->helper_private); + + if (!set->mode) + set->fb = NULL; + + /* The fb helper likes to play gross jokes with ->mode_set_config. + * Unfortunately the crtc helper doesn't do much at all for this case, + * so we have to cope with this madness until the fb helper is fixed up. */ + if (set->fb && set->num_connectors == 0) + return 0; + + if (set->fb) { + DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n", + set->crtc->base.id, set->fb->base.id, + (int)set->num_connectors, set->x, set->y); + } else { + DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id); + } + + dev = set->crtc->dev; + + ret = -ENOMEM; + config = kzalloc(sizeof(*config), GFP_KERNEL); + if (!config) + goto out_config; + + ret = intel_set_config_save_state(dev, config); + if (ret) + goto out_config; + + save_set.crtc = set->crtc; + save_set.mode = &set->crtc->mode; + save_set.x = set->crtc->x; + save_set.y = set->crtc->y; + save_set.fb = set->crtc->fb; + + /* Compute whether we need a full modeset, only an fb base update or no + * change at all. In the future we might also check whether only the + * mode changed, e.g. for LVDS where we only change the panel fitter in + * such cases. */ + intel_set_config_compute_mode_changes(set, config); + + ret = intel_modeset_stage_output_state(dev, set, config); + if (ret) + goto fail; + + if (config->mode_changed) { + if (set->mode) { + DRM_DEBUG_KMS("attempting to set mode from" + " userspace\n"); + drm_mode_debug_printmodeline(set->mode); + } + + if (!intel_set_mode(set->crtc, set->mode, + set->x, set->y, set->fb)) { + DRM_ERROR("failed to set mode on [CRTC:%d]\n", + set->crtc->base.id); + ret = -EINVAL; + goto fail; + } + } else if (config->fb_changed) { + ret = intel_pipe_set_base(set->crtc, + set->x, set->y, set->fb); + } + + intel_set_config_free(config); + + return 0; + +fail: + intel_set_config_restore_state(dev, config); + + /* Try to restore the config */ + if (config->mode_changed && + !intel_set_mode(save_set.crtc, save_set.mode, + save_set.x, save_set.y, save_set.fb)) + DRM_ERROR("failed to restore config after modeset failure\n"); + +out_config: + intel_set_config_free(config); + return ret; +} static const struct drm_crtc_funcs intel_crtc_funcs = { - .reset = intel_crtc_reset, .cursor_set = intel_crtc_cursor_set, .cursor_move = intel_crtc_cursor_move, .gamma_set = intel_crtc_gamma_set, - .set_config = drm_crtc_helper_set_config, + .set_config = intel_crtc_set_config, .destroy = intel_crtc_destroy, .page_flip = intel_crtc_page_flip, }; @@ -6663,24 +7448,9 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base; dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base; - intel_crtc_reset(&intel_crtc->base); - intel_crtc->active = true; /* force the pipe off on setup_init_config */ intel_crtc->bpp = 24; /* default for pre-Ironlake */ - if (HAS_PCH_SPLIT(dev)) { - intel_helper_funcs.prepare = ironlake_crtc_prepare; - intel_helper_funcs.commit = ironlake_crtc_commit; - } else { - intel_helper_funcs.prepare = i9xx_crtc_prepare; - intel_helper_funcs.commit = i9xx_crtc_commit; - } - drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs); - - intel_crtc->busy = false; - - setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer, - (unsigned long)intel_crtc); } int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, @@ -6707,15 +7477,23 @@ int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, return 0; } -static int intel_encoder_clones(struct drm_device *dev, int type_mask) +static int intel_encoder_clones(struct intel_encoder *encoder) { - struct intel_encoder *encoder; + struct drm_device *dev = encoder->base.dev; + struct intel_encoder *source_encoder; int index_mask = 0; int entry = 0; - list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { - if (type_mask & encoder->clone_mask) + list_for_each_entry(source_encoder, + &dev->mode_config.encoder_list, base.head) { + + if (encoder == source_encoder) + index_mask |= (1 << entry); + + /* Intel hw has only one MUX where enocoders could be cloned. */ + if (encoder->cloneable && source_encoder->cloneable) index_mask |= (1 << entry); + entry++; } @@ -6756,10 +7534,10 @@ static void intel_setup_outputs(struct drm_device *dev) dpd_is_edp = intel_dpd_is_edp(dev); if (has_edp_a(dev)) - intel_dp_init(dev, DP_A); + intel_dp_init(dev, DP_A, PORT_A); if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED)) - intel_dp_init(dev, PCH_DP_D); + intel_dp_init(dev, PCH_DP_D, PORT_D); } intel_crt_init(dev); @@ -6790,22 +7568,22 @@ static void intel_setup_outputs(struct drm_device *dev) /* PCH SDVOB multiplex with HDMIB */ found = intel_sdvo_init(dev, PCH_SDVOB, true); if (!found) - intel_hdmi_init(dev, HDMIB); + intel_hdmi_init(dev, HDMIB, PORT_B); if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED)) - intel_dp_init(dev, PCH_DP_B); + intel_dp_init(dev, PCH_DP_B, PORT_B); } if (I915_READ(HDMIC) & PORT_DETECTED) - intel_hdmi_init(dev, HDMIC); + intel_hdmi_init(dev, HDMIC, PORT_C); if (!dpd_is_edp && I915_READ(HDMID) & PORT_DETECTED) - intel_hdmi_init(dev, HDMID); + intel_hdmi_init(dev, HDMID, PORT_D); if (I915_READ(PCH_DP_C) & DP_DETECTED) - intel_dp_init(dev, PCH_DP_C); + intel_dp_init(dev, PCH_DP_C, PORT_C); if (!dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED)) - intel_dp_init(dev, PCH_DP_D); + intel_dp_init(dev, PCH_DP_D, PORT_D); } else if (IS_VALLEYVIEW(dev)) { int found; @@ -6813,17 +7591,17 @@ static void intel_setup_outputs(struct drm_device *dev) /* SDVOB multiplex with HDMIB */ found = intel_sdvo_init(dev, SDVOB, true); if (!found) - intel_hdmi_init(dev, SDVOB); + intel_hdmi_init(dev, SDVOB, PORT_B); if (!found && (I915_READ(DP_B) & DP_DETECTED)) - intel_dp_init(dev, DP_B); + intel_dp_init(dev, DP_B, PORT_B); } if (I915_READ(SDVOC) & PORT_DETECTED) - intel_hdmi_init(dev, SDVOC); + intel_hdmi_init(dev, SDVOC, PORT_C); /* Shares lanes with HDMI on SDVOC */ if (I915_READ(DP_C) & DP_DETECTED) - intel_dp_init(dev, DP_C); + intel_dp_init(dev, DP_C, PORT_C); } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) { bool found = false; @@ -6832,12 +7610,12 @@ static void intel_setup_outputs(struct drm_device *dev) found = intel_sdvo_init(dev, SDVOB, true); if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) { DRM_DEBUG_KMS("probing HDMI on SDVOB\n"); - intel_hdmi_init(dev, SDVOB); + intel_hdmi_init(dev, SDVOB, PORT_B); } if (!found && SUPPORTS_INTEGRATED_DP(dev)) { DRM_DEBUG_KMS("probing DP_B\n"); - intel_dp_init(dev, DP_B); + intel_dp_init(dev, DP_B, PORT_B); } } @@ -6852,18 +7630,18 @@ static void intel_setup_outputs(struct drm_device *dev) if (SUPPORTS_INTEGRATED_HDMI(dev)) { DRM_DEBUG_KMS("probing HDMI on SDVOC\n"); - intel_hdmi_init(dev, SDVOC); + intel_hdmi_init(dev, SDVOC, PORT_C); } if (SUPPORTS_INTEGRATED_DP(dev)) { DRM_DEBUG_KMS("probing DP_C\n"); - intel_dp_init(dev, DP_C); + intel_dp_init(dev, DP_C, PORT_C); } } if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED)) { DRM_DEBUG_KMS("probing DP_D\n"); - intel_dp_init(dev, DP_D); + intel_dp_init(dev, DP_D, PORT_D); } } else if (IS_GEN2(dev)) intel_dvo_init(dev); @@ -6874,12 +7652,9 @@ static void intel_setup_outputs(struct drm_device *dev) list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { encoder->base.possible_crtcs = encoder->crtc_mask; encoder->base.possible_clones = - intel_encoder_clones(dev, encoder->clone_mask); + intel_encoder_clones(encoder); } - /* disable all the possible outputs/crtcs before entering KMS mode */ - drm_helper_disable_unused_functions(dev); - if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) ironlake_init_pch_refclk(dev); } @@ -6981,13 +7756,15 @@ static void intel_init_display(struct drm_device *dev) /* We always want a DPMS function */ if (HAS_PCH_SPLIT(dev)) { - dev_priv->display.dpms = ironlake_crtc_dpms; dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set; + dev_priv->display.crtc_enable = ironlake_crtc_enable; + dev_priv->display.crtc_disable = ironlake_crtc_disable; dev_priv->display.off = ironlake_crtc_off; dev_priv->display.update_plane = ironlake_update_plane; } else { - dev_priv->display.dpms = i9xx_crtc_dpms; dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set; + dev_priv->display.crtc_enable = i9xx_crtc_enable; + dev_priv->display.crtc_disable = i9xx_crtc_disable; dev_priv->display.off = i9xx_crtc_off; dev_priv->display.update_plane = i9xx_update_plane; } @@ -7031,7 +7808,7 @@ static void intel_init_display(struct drm_device *dev) dev_priv->display.write_eld = ironlake_write_eld; } else if (IS_HASWELL(dev)) { dev_priv->display.fdi_link_train = hsw_fdi_link_train; - dev_priv->display.write_eld = ironlake_write_eld; + dev_priv->display.write_eld = haswell_write_eld; } else dev_priv->display.update_wm = NULL; } else if (IS_G4X(dev)) { @@ -7109,21 +7886,16 @@ static struct intel_quirk intel_quirks[] = { /* HP Mini needs pipe A force quirk (LP: #322104) */ { 0x27ae, 0x103c, 0x361a, quirk_pipea_force }, - /* Thinkpad R31 needs pipe A force quirk */ - { 0x3577, 0x1014, 0x0505, quirk_pipea_force }, /* Toshiba Protege R-205, S-209 needs pipe A force quirk */ { 0x2592, 0x1179, 0x0001, quirk_pipea_force }, - /* ThinkPad X30 needs pipe A force quirk (LP: #304614) */ - { 0x3577, 0x1014, 0x0513, quirk_pipea_force }, - /* ThinkPad X40 needs pipe A force quirk */ - /* ThinkPad T60 needs pipe A force quirk (bug #16494) */ { 0x2782, 0x17aa, 0x201a, quirk_pipea_force }, /* 855 & before need to leave pipe A & dpll A up */ { 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force }, { 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force }, + { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force }, /* Lenovo U160 cannot use SSC on LVDS */ { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable }, @@ -7239,10 +8011,251 @@ void intel_modeset_init(struct drm_device *dev) /* Just disable it once at startup */ i915_disable_vga(dev); intel_setup_outputs(dev); +} + +static void +intel_connector_break_all_links(struct intel_connector *connector) +{ + connector->base.dpms = DRM_MODE_DPMS_OFF; + connector->base.encoder = NULL; + connector->encoder->connectors_active = false; + connector->encoder->base.crtc = NULL; +} + +static void intel_enable_pipe_a(struct drm_device *dev) +{ + struct intel_connector *connector; + struct drm_connector *crt = NULL; + struct intel_load_detect_pipe load_detect_temp; + + /* We can't just switch on the pipe A, we need to set things up with a + * proper mode and output configuration. As a gross hack, enable pipe A + * by enabling the load detect pipe once. */ + list_for_each_entry(connector, + &dev->mode_config.connector_list, + base.head) { + if (connector->encoder->type == INTEL_OUTPUT_ANALOG) { + crt = &connector->base; + break; + } + } + + if (!crt) + return; + + if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp)) + intel_release_load_detect_pipe(crt, &load_detect_temp); + - INIT_WORK(&dev_priv->idle_work, intel_idle_update); - setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer, - (unsigned long)dev); +} + +static void intel_sanitize_crtc(struct intel_crtc *crtc) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 reg, val; + + /* Clear any frame start delays used for debugging left by the BIOS */ + reg = PIPECONF(crtc->pipe); + I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK); + + /* We need to sanitize the plane -> pipe mapping first because this will + * disable the crtc (and hence change the state) if it is wrong. */ + if (!HAS_PCH_SPLIT(dev)) { + struct intel_connector *connector; + bool plane; + + reg = DSPCNTR(crtc->plane); + val = I915_READ(reg); + + if ((val & DISPLAY_PLANE_ENABLE) == 0 && + (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe)) + goto ok; + + DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n", + crtc->base.base.id); + + /* Pipe has the wrong plane attached and the plane is active. + * Temporarily change the plane mapping and disable everything + * ... */ + plane = crtc->plane; + crtc->plane = !plane; + dev_priv->display.crtc_disable(&crtc->base); + crtc->plane = plane; + + /* ... and break all links. */ + list_for_each_entry(connector, &dev->mode_config.connector_list, + base.head) { + if (connector->encoder->base.crtc != &crtc->base) + continue; + + intel_connector_break_all_links(connector); + } + + WARN_ON(crtc->active); + crtc->base.enabled = false; + } +ok: + + if (dev_priv->quirks & QUIRK_PIPEA_FORCE && + crtc->pipe == PIPE_A && !crtc->active) { + /* BIOS forgot to enable pipe A, this mostly happens after + * resume. Force-enable the pipe to fix this, the update_dpms + * call below we restore the pipe to the right state, but leave + * the required bits on. */ + intel_enable_pipe_a(dev); + } + + /* Adjust the state of the output pipe according to whether we + * have active connectors/encoders. */ + intel_crtc_update_dpms(&crtc->base); + + if (crtc->active != crtc->base.enabled) { + struct intel_encoder *encoder; + + /* This can happen either due to bugs in the get_hw_state + * functions or because the pipe is force-enabled due to the + * pipe A quirk. */ + DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n", + crtc->base.base.id, + crtc->base.enabled ? "enabled" : "disabled", + crtc->active ? "enabled" : "disabled"); + + crtc->base.enabled = crtc->active; + + /* Because we only establish the connector -> encoder -> + * crtc links if something is active, this means the + * crtc is now deactivated. Break the links. connector + * -> encoder links are only establish when things are + * actually up, hence no need to break them. */ + WARN_ON(crtc->active); + + for_each_encoder_on_crtc(dev, &crtc->base, encoder) { + WARN_ON(encoder->connectors_active); + encoder->base.crtc = NULL; + } + } +} + +static void intel_sanitize_encoder(struct intel_encoder *encoder) +{ + struct intel_connector *connector; + struct drm_device *dev = encoder->base.dev; + + /* We need to check both for a crtc link (meaning that the + * encoder is active and trying to read from a pipe) and the + * pipe itself being active. */ + bool has_active_crtc = encoder->base.crtc && + to_intel_crtc(encoder->base.crtc)->active; + + if (encoder->connectors_active && !has_active_crtc) { + DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n", + encoder->base.base.id, + drm_get_encoder_name(&encoder->base)); + + /* Connector is active, but has no active pipe. This is + * fallout from our resume register restoring. Disable + * the encoder manually again. */ + if (encoder->base.crtc) { + DRM_DEBUG_KMS("[ENCODER:%d:%s] manually disabled\n", + encoder->base.base.id, + drm_get_encoder_name(&encoder->base)); + encoder->disable(encoder); + } + + /* Inconsistent output/port/pipe state happens presumably due to + * a bug in one of the get_hw_state functions. Or someplace else + * in our code, like the register restore mess on resume. Clamp + * things to off as a safer default. */ + list_for_each_entry(connector, + &dev->mode_config.connector_list, + base.head) { + if (connector->encoder != encoder) + continue; + + intel_connector_break_all_links(connector); + } + } + /* Enabled encoders without active connectors will be fixed in + * the crtc fixup. */ +} + +/* Scan out the current hw modeset state, sanitizes it and maps it into the drm + * and i915 state tracking structures. */ +void intel_modeset_setup_hw_state(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + enum pipe pipe; + u32 tmp; + struct intel_crtc *crtc; + struct intel_encoder *encoder; + struct intel_connector *connector; + + for_each_pipe(pipe) { + crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]); + + tmp = I915_READ(PIPECONF(pipe)); + if (tmp & PIPECONF_ENABLE) + crtc->active = true; + else + crtc->active = false; + + crtc->base.enabled = crtc->active; + + DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n", + crtc->base.base.id, + crtc->active ? "enabled" : "disabled"); + } + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + pipe = 0; + + if (encoder->get_hw_state(encoder, &pipe)) { + encoder->base.crtc = + dev_priv->pipe_to_crtc_mapping[pipe]; + } else { + encoder->base.crtc = NULL; + } + + encoder->connectors_active = false; + DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe=%i\n", + encoder->base.base.id, + drm_get_encoder_name(&encoder->base), + encoder->base.crtc ? "enabled" : "disabled", + pipe); + } + + list_for_each_entry(connector, &dev->mode_config.connector_list, + base.head) { + if (connector->get_hw_state(connector)) { + connector->base.dpms = DRM_MODE_DPMS_ON; + connector->encoder->connectors_active = true; + connector->base.encoder = &connector->encoder->base; + } else { + connector->base.dpms = DRM_MODE_DPMS_OFF; + connector->base.encoder = NULL; + } + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n", + connector->base.base.id, + drm_get_connector_name(&connector->base), + connector->base.encoder ? "enabled" : "disabled"); + } + + /* HW state is read out, now we need to sanitize this mess. */ + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + intel_sanitize_encoder(encoder); + } + + for_each_pipe(pipe) { + crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]); + intel_sanitize_crtc(crtc); + } + + intel_modeset_update_staged_output_state(dev); + + intel_modeset_check_state(dev); } void intel_modeset_gem_init(struct drm_device *dev) @@ -7250,6 +8263,8 @@ void intel_modeset_gem_init(struct drm_device *dev) intel_modeset_init_hw(dev); intel_setup_overlay(dev); + + intel_modeset_setup_hw_state(dev); } void intel_modeset_cleanup(struct drm_device *dev) @@ -7288,19 +8303,11 @@ void intel_modeset_cleanup(struct drm_device *dev) * enqueue unpin/hotplug work. */ drm_irq_uninstall(dev); cancel_work_sync(&dev_priv->hotplug_work); - cancel_work_sync(&dev_priv->rps_work); + cancel_work_sync(&dev_priv->rps.work); /* flush any delayed tasks or pending work */ flush_scheduled_work(); - /* Shut off idle work before the crtcs get freed. */ - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { - intel_crtc = to_intel_crtc(crtc); - del_timer_sync(&intel_crtc->idle_timer); - } - del_timer_sync(&dev_priv->idle_timer); - cancel_work_sync(&dev_priv->idle_work); - drm_mode_config_cleanup(dev); } @@ -7346,7 +8353,7 @@ struct intel_display_error_state { u32 position; u32 base; u32 size; - } cursor[2]; + } cursor[I915_MAX_PIPES]; struct intel_pipe_error_state { u32 conf; @@ -7358,7 +8365,7 @@ struct intel_display_error_state { u32 vtotal; u32 vblank; u32 vsync; - } pipe[2]; + } pipe[I915_MAX_PIPES]; struct intel_plane_error_state { u32 control; @@ -7368,7 +8375,7 @@ struct intel_display_error_state { u32 addr; u32 surface; u32 tile_offset; - } plane[2]; + } plane[I915_MAX_PIPES]; }; struct intel_display_error_state * @@ -7382,7 +8389,7 @@ intel_display_capture_error_state(struct drm_device *dev) if (error == NULL) return NULL; - for (i = 0; i < 2; i++) { + for_each_pipe(i) { error->cursor[i].control = I915_READ(CURCNTR(i)); error->cursor[i].position = I915_READ(CURPOS(i)); error->cursor[i].base = I915_READ(CURBASE(i)); @@ -7415,9 +8422,11 @@ intel_display_print_error_state(struct seq_file *m, struct drm_device *dev, struct intel_display_error_state *error) { + drm_i915_private_t *dev_priv = dev->dev_private; int i; - for (i = 0; i < 2; i++) { + seq_printf(m, "Num Pipes: %d\n", dev_priv->num_pipe); + for_each_pipe(i) { seq_printf(m, "Pipe [%d]:\n", i); seq_printf(m, " CONF: %08x\n", error->pipe[i].conf); seq_printf(m, " SRC: %08x\n", error->pipe[i].source); |