diff options
Diffstat (limited to 'drivers/gpu/drm/amd')
| -rw-r--r-- | drivers/gpu/drm/amd/include/atomfirmware.h | 102 | ||||
| -rw-r--r-- | drivers/gpu/drm/amd/powerplay/navi10_ppt.c | 99 |
2 files changed, 130 insertions, 71 deletions
diff --git a/drivers/gpu/drm/amd/include/atomfirmware.h b/drivers/gpu/drm/amd/include/atomfirmware.h index 70146518174c..a6f6e6bf5992 100644 --- a/drivers/gpu/drm/amd/include/atomfirmware.h +++ b/drivers/gpu/drm/amd/include/atomfirmware.h @@ -1876,6 +1876,108 @@ struct atom_smc_dpm_info_v4_6 uint32_t boardreserved[10]; }; +struct atom_smc_dpm_info_v4_7 +{ + struct atom_common_table_header table_header; + // SECTION: BOARD PARAMETERS + // I2C Control + struct smudpm_i2c_controller_config_v2 I2cControllers[8]; + + // SVI2 Board Parameters + uint16_t MaxVoltageStepGfx; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value. + uint16_t MaxVoltageStepSoc; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value. + + uint8_t VddGfxVrMapping; // Use VR_MAPPING* bitfields + uint8_t VddSocVrMapping; // Use VR_MAPPING* bitfields + uint8_t VddMem0VrMapping; // Use VR_MAPPING* bitfields + uint8_t VddMem1VrMapping; // Use VR_MAPPING* bitfields + + uint8_t GfxUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode + uint8_t SocUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode + uint8_t ExternalSensorPresent; // External RDI connected to TMON (aka TEMP IN) + uint8_t Padding8_V; + + // Telemetry Settings + uint16_t GfxMaxCurrent; // in Amps + uint8_t GfxOffset; // in Amps + uint8_t Padding_TelemetryGfx; + uint16_t SocMaxCurrent; // in Amps + uint8_t SocOffset; // in Amps + uint8_t Padding_TelemetrySoc; + + uint16_t Mem0MaxCurrent; // in Amps + uint8_t Mem0Offset; // in Amps + uint8_t Padding_TelemetryMem0; + + uint16_t Mem1MaxCurrent; // in Amps + uint8_t Mem1Offset; // in Amps + uint8_t Padding_TelemetryMem1; + + // GPIO Settings + uint8_t AcDcGpio; // GPIO pin configured for AC/DC switching + uint8_t AcDcPolarity; // GPIO polarity for AC/DC switching + uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event + uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event + + uint8_t VR1HotGpio; // GPIO pin configured for VR1 HOT event + uint8_t VR1HotPolarity; // GPIO polarity for VR1 HOT event + uint8_t GthrGpio; // GPIO pin configured for GTHR Event + uint8_t GthrPolarity; // replace GPIO polarity for GTHR + + // LED Display Settings + uint8_t LedPin0; // GPIO number for LedPin[0] + uint8_t LedPin1; // GPIO number for LedPin[1] + uint8_t LedPin2; // GPIO number for LedPin[2] + uint8_t padding8_4; + + // GFXCLK PLL Spread Spectrum + uint8_t PllGfxclkSpreadEnabled; // on or off + uint8_t PllGfxclkSpreadPercent; // Q4.4 + uint16_t PllGfxclkSpreadFreq; // kHz + + // GFXCLK DFLL Spread Spectrum + uint8_t DfllGfxclkSpreadEnabled; // on or off + uint8_t DfllGfxclkSpreadPercent; // Q4.4 + uint16_t DfllGfxclkSpreadFreq; // kHz + + // UCLK Spread Spectrum + uint8_t UclkSpreadEnabled; // on or off + uint8_t UclkSpreadPercent; // Q4.4 + uint16_t UclkSpreadFreq; // kHz + + // SOCCLK Spread Spectrum + uint8_t SoclkSpreadEnabled; // on or off + uint8_t SocclkSpreadPercent; // Q4.4 + uint16_t SocclkSpreadFreq; // kHz + + // Total board power + uint16_t TotalBoardPower; //Only needed for TCP Estimated case, where TCP = TGP+Total Board Power + uint16_t BoardPadding; + + // Mvdd Svi2 Div Ratio Setting + uint32_t MvddRatio; // This is used for MVDD Vid workaround. It has 16 fractional bits (Q16.16) + + // GPIO pins for I2C communications with 2nd controller for Input Telemetry Sequence + uint8_t GpioI2cScl; // Serial Clock + uint8_t GpioI2cSda; // Serial Data + uint16_t GpioPadding; + + // Additional LED Display Settings + uint8_t LedPin3; // GPIO number for LedPin[3] - PCIE GEN Speed + uint8_t LedPin4; // GPIO number for LedPin[4] - PMFW Error Status + uint16_t LedEnableMask; + + // Power Limit Scalars + uint8_t PowerLimitScalar[4]; //[PPT_THROTTLER_COUNT] + + uint8_t MvddUlvPhaseSheddingMask; + uint8_t VddciUlvPhaseSheddingMask; + uint8_t Padding8_Psi1; + uint8_t Padding8_Psi2; + + uint32_t BoardReserved[5]; +}; + /* *************************************************************************** Data Table asic_profiling_info structure diff --git a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c index 15030284b444..c94270f7c198 100644 --- a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c +++ b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c @@ -423,6 +423,7 @@ static int navi10_append_powerplay_table(struct smu_context *smu) struct smu_table_context *table_context = &smu->smu_table; PPTable_t *smc_pptable = table_context->driver_pptable; struct atom_smc_dpm_info_v4_5 *smc_dpm_table; + struct atom_smc_dpm_info_v4_7 *smc_dpm_table_v4_7; int index, ret; index = get_index_into_master_table(atom_master_list_of_data_tables_v2_1, @@ -433,77 +434,33 @@ static int navi10_append_powerplay_table(struct smu_context *smu) if (ret) return ret; - memcpy(smc_pptable->I2cControllers, smc_dpm_table->I2cControllers, - sizeof(I2cControllerConfig_t) * NUM_I2C_CONTROLLERS); - - /* SVI2 Board Parameters */ - smc_pptable->MaxVoltageStepGfx = smc_dpm_table->MaxVoltageStepGfx; - smc_pptable->MaxVoltageStepSoc = smc_dpm_table->MaxVoltageStepSoc; - smc_pptable->VddGfxVrMapping = smc_dpm_table->VddGfxVrMapping; - smc_pptable->VddSocVrMapping = smc_dpm_table->VddSocVrMapping; - smc_pptable->VddMem0VrMapping = smc_dpm_table->VddMem0VrMapping; - smc_pptable->VddMem1VrMapping = smc_dpm_table->VddMem1VrMapping; - smc_pptable->GfxUlvPhaseSheddingMask = smc_dpm_table->GfxUlvPhaseSheddingMask; - smc_pptable->SocUlvPhaseSheddingMask = smc_dpm_table->SocUlvPhaseSheddingMask; - smc_pptable->ExternalSensorPresent = smc_dpm_table->ExternalSensorPresent; - smc_pptable->Padding8_V = smc_dpm_table->Padding8_V; - - /* Telemetry Settings */ - smc_pptable->GfxMaxCurrent = smc_dpm_table->GfxMaxCurrent; - smc_pptable->GfxOffset = smc_dpm_table->GfxOffset; - smc_pptable->Padding_TelemetryGfx = smc_dpm_table->Padding_TelemetryGfx; - smc_pptable->SocMaxCurrent = smc_dpm_table->SocMaxCurrent; - smc_pptable->SocOffset = smc_dpm_table->SocOffset; - smc_pptable->Padding_TelemetrySoc = smc_dpm_table->Padding_TelemetrySoc; - smc_pptable->Mem0MaxCurrent = smc_dpm_table->Mem0MaxCurrent; - smc_pptable->Mem0Offset = smc_dpm_table->Mem0Offset; - smc_pptable->Padding_TelemetryMem0 = smc_dpm_table->Padding_TelemetryMem0; - smc_pptable->Mem1MaxCurrent = smc_dpm_table->Mem1MaxCurrent; - smc_pptable->Mem1Offset = smc_dpm_table->Mem1Offset; - smc_pptable->Padding_TelemetryMem1 = smc_dpm_table->Padding_TelemetryMem1; - - /* GPIO Settings */ - smc_pptable->AcDcGpio = smc_dpm_table->AcDcGpio; - smc_pptable->AcDcPolarity = smc_dpm_table->AcDcPolarity; - smc_pptable->VR0HotGpio = smc_dpm_table->VR0HotGpio; - smc_pptable->VR0HotPolarity = smc_dpm_table->VR0HotPolarity; - smc_pptable->VR1HotGpio = smc_dpm_table->VR1HotGpio; - smc_pptable->VR1HotPolarity = smc_dpm_table->VR1HotPolarity; - smc_pptable->GthrGpio = smc_dpm_table->GthrGpio; - smc_pptable->GthrPolarity = smc_dpm_table->GthrPolarity; - - /* LED Display Settings */ - smc_pptable->LedPin0 = smc_dpm_table->LedPin0; - smc_pptable->LedPin1 = smc_dpm_table->LedPin1; - smc_pptable->LedPin2 = smc_dpm_table->LedPin2; - smc_pptable->padding8_4 = smc_dpm_table->padding8_4; - - /* GFXCLK PLL Spread Spectrum */ - smc_pptable->PllGfxclkSpreadEnabled = smc_dpm_table->PllGfxclkSpreadEnabled; - smc_pptable->PllGfxclkSpreadPercent = smc_dpm_table->PllGfxclkSpreadPercent; - smc_pptable->PllGfxclkSpreadFreq = smc_dpm_table->PllGfxclkSpreadFreq; - - /* GFXCLK DFLL Spread Spectrum */ - smc_pptable->DfllGfxclkSpreadEnabled = smc_dpm_table->DfllGfxclkSpreadEnabled; - smc_pptable->DfllGfxclkSpreadPercent = smc_dpm_table->DfllGfxclkSpreadPercent; - smc_pptable->DfllGfxclkSpreadFreq = smc_dpm_table->DfllGfxclkSpreadFreq; - - /* UCLK Spread Spectrum */ - smc_pptable->UclkSpreadEnabled = smc_dpm_table->UclkSpreadEnabled; - smc_pptable->UclkSpreadPercent = smc_dpm_table->UclkSpreadPercent; - smc_pptable->UclkSpreadFreq = smc_dpm_table->UclkSpreadFreq; - - /* SOCCLK Spread Spectrum */ - smc_pptable->SoclkSpreadEnabled = smc_dpm_table->SoclkSpreadEnabled; - smc_pptable->SocclkSpreadPercent = smc_dpm_table->SocclkSpreadPercent; - smc_pptable->SocclkSpreadFreq = smc_dpm_table->SocclkSpreadFreq; - - /* Total board power */ - smc_pptable->TotalBoardPower = smc_dpm_table->TotalBoardPower; - smc_pptable->BoardPadding = smc_dpm_table->BoardPadding; - - /* Mvdd Svi2 Div Ratio Setting */ - smc_pptable->MvddRatio = smc_dpm_table->MvddRatio; + pr_info("smc_dpm_info table revision(format.content): %d.%d\n", + smc_dpm_table->table_header.format_revision, + smc_dpm_table->table_header.content_revision); + + if (smc_dpm_table->table_header.format_revision != 4) { + pr_err("smc_dpm_info table format revision is not 4!\n"); + return -EINVAL; + } + + switch (smc_dpm_table->table_header.content_revision) { + case 5: /* nv10 and nv14 */ + memcpy(smc_pptable->I2cControllers, smc_dpm_table->I2cControllers, + sizeof(*smc_dpm_table) - sizeof(smc_dpm_table->table_header)); + break; + case 7: /* nv12 */ + ret = smu_get_atom_data_table(smu, index, NULL, NULL, NULL, + (uint8_t **)&smc_dpm_table_v4_7); + if (ret) + return ret; + memcpy(smc_pptable->I2cControllers, smc_dpm_table_v4_7->I2cControllers, + sizeof(*smc_dpm_table_v4_7) - sizeof(smc_dpm_table_v4_7->table_header)); + break; + default: + pr_err("smc_dpm_info with unsupported content revision %d!\n", + smc_dpm_table->table_header.content_revision); + return -EINVAL; + } if (adev->pm.pp_feature & PP_GFXOFF_MASK) { /* TODO: remove it once SMU fw fix it */ |