diff options
Diffstat (limited to 'drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c')
| -rw-r--r-- | drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 58 |
1 files changed, 46 insertions, 12 deletions
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index b4f2d61ea0d5..86fbb4138285 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -23,7 +23,6 @@ */ #include <drm/amdgpu_drm.h> -#include <drm/drm_aperture.h> #include <drm/drm_drv.h> #include <drm/drm_fbdev_generic.h> #include <drm/drm_gem.h> @@ -39,7 +38,6 @@ #include <linux/mmu_notifier.h> #include <linux/suspend.h> #include <linux/cc_platform.h> -#include <linux/fb.h> #include <linux/dynamic_debug.h> #include "amdgpu.h" @@ -105,13 +103,16 @@ * - 3.46.0 - To enable hot plug amdgpu tests in libdrm * - 3.47.0 - Add AMDGPU_GEM_CREATE_DISCARDABLE and AMDGPU_VM_NOALLOC flags * - 3.48.0 - Add IP discovery version info to HW INFO - * 3.49.0 - Add gang submit into CS IOCTL + * - 3.49.0 - Add gang submit into CS IOCTL + * - 3.50.0 - Update AMDGPU_INFO_DEV_INFO IOCTL for minimum engine and memory clock + * Update AMDGPU_INFO_SENSOR IOCTL for PEAK_PSTATE engine and memory clock + * 3.51.0 - Return the PCIe gen and lanes from the INFO ioctl */ #define KMS_DRIVER_MAJOR 3 -#define KMS_DRIVER_MINOR 49 +#define KMS_DRIVER_MINOR 51 #define KMS_DRIVER_PATCHLEVEL 0 -int amdgpu_vram_limit; +unsigned int amdgpu_vram_limit = UINT_MAX; int amdgpu_vis_vram_limit; int amdgpu_gart_size = -1; /* auto */ int amdgpu_gtt_size = -1; /* auto */ @@ -181,11 +182,13 @@ int amdgpu_mes_kiq; int amdgpu_noretry = -1; int amdgpu_force_asic_type = -1; int amdgpu_tmz = -1; /* auto */ +uint amdgpu_freesync_vid_mode; int amdgpu_reset_method = -1; /* auto */ int amdgpu_num_kcq = -1; int amdgpu_smartshift_bias; int amdgpu_use_xgmi_p2p = 1; int amdgpu_vcnfw_log; +int amdgpu_sg_display = -1; /* auto */ static void amdgpu_drv_delayed_reset_work_handler(struct work_struct *work); @@ -880,6 +883,32 @@ MODULE_PARM_DESC(tmz, "Enable TMZ feature (-1 = auto (default), 0 = off, 1 = on) module_param_named(tmz, amdgpu_tmz, int, 0444); /** + * DOC: freesync_video (uint) + * Enable the optimization to adjust front porch timing to achieve seamless + * mode change experience when setting a freesync supported mode for which full + * modeset is not needed. + * + * The Display Core will add a set of modes derived from the base FreeSync + * video mode into the corresponding connector's mode list based on commonly + * used refresh rates and VRR range of the connected display, when users enable + * this feature. From the userspace perspective, they can see a seamless mode + * change experience when the change between different refresh rates under the + * same resolution. Additionally, userspace applications such as Video playback + * can read this modeset list and change the refresh rate based on the video + * frame rate. Finally, the userspace can also derive an appropriate mode for a + * particular refresh rate based on the FreeSync Mode and add it to the + * connector's mode list. + * + * Note: This is an experimental feature. + * + * The default value: 0 (off). + */ +MODULE_PARM_DESC( + freesync_video, + "Enable freesync modesetting optimization feature (0 = off (default), 1 = on)"); +module_param_named(freesync_video, amdgpu_freesync_vid_mode, uint, 0444); + +/** * DOC: reset_method (int) * GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco) */ @@ -906,6 +935,16 @@ MODULE_PARM_DESC(vcnfw_log, "Enable vcnfw log(0 = disable (default value), 1 = e module_param_named(vcnfw_log, amdgpu_vcnfw_log, int, 0444); /** + * DOC: sg_display (int) + * Disable S/G (scatter/gather) display (i.e., display from system memory). + * This option is only relevant on APUs. Set this option to 0 to disable + * S/G display if you experience flickering or other issues under memory + * pressure and report the issue. + */ +MODULE_PARM_DESC(sg_display, "S/G Display (-1 = auto (default), 0 = disable)"); +module_param_named(sg_display, amdgpu_sg_display, int, 0444); + +/** * DOC: smu_pptable_id (int) * Used to override pptable id. id = 0 use VBIOS pptable. * id > 0 use the soft pptable with specicfied id. @@ -2095,11 +2134,6 @@ static int amdgpu_pci_probe(struct pci_dev *pdev, } #endif - /* Get rid of things like offb */ - ret = drm_aperture_remove_conflicting_pci_framebuffers(pdev, &amdgpu_kms_driver); - if (ret) - return ret; - adev = devm_drm_dev_alloc(&pdev->dev, &amdgpu_kms_driver, typeof(*adev), ddev); if (IS_ERR(adev)) return PTR_ERR(adev); @@ -2204,6 +2238,8 @@ amdgpu_pci_remove(struct pci_dev *pdev) struct drm_device *dev = pci_get_drvdata(pdev); struct amdgpu_device *adev = drm_to_adev(dev); + drm_dev_unplug(dev); + if (adev->pm.rpm_mode != AMDGPU_RUNPM_NONE) { pm_runtime_get_sync(dev->dev); pm_runtime_forbid(dev->dev); @@ -2243,8 +2279,6 @@ amdgpu_pci_remove(struct pci_dev *pdev) amdgpu_driver_unload_kms(dev); - drm_dev_unplug(dev); - /* * Flush any in flight DMA operations from device. * Clear the Bus Master Enable bit and then wait on the PCIe Device |