diff options
Diffstat (limited to 'drivers/gpio')
| -rw-r--r-- | drivers/gpio/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/gpio/Makefile | 1 | ||||
| -rw-r--r-- | drivers/gpio/gpio-mlxbf3.c | 248 |
3 files changed, 262 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 3cb34896c26a..5e3a01f40c9b 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1599,6 +1599,19 @@ config GPIO_MLXBF2 help Say Y here if you want GPIO support on Mellanox BlueField 2 SoC. +config GPIO_MLXBF3 + tristate "Mellanox BlueField 3 SoC GPIO" + depends on (MELLANOX_PLATFORM && ARM64) || COMPILE_TEST + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + help + Say Y if you want GPIO support on Mellanox BlueField 3 SoC. + This GPIO controller supports interrupt handling and enables the + manipulation of certain GPIO pins. + This controller should be used in parallel with pinctrl-mlxbf3 to + control the desired GPIOs. + This driver can also be built as a module called mlxbf3-gpio. + config GPIO_ML_IOH tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support" depends on X86 || COMPILE_TEST diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 7843b16f5d59..c3ac51d47aa9 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -104,6 +104,7 @@ obj-$(CONFIG_GPIO_MERRIFIELD) += gpio-merrifield.o obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o obj-$(CONFIG_GPIO_MLXBF) += gpio-mlxbf.o obj-$(CONFIG_GPIO_MLXBF2) += gpio-mlxbf2.o +obj-$(CONFIG_GPIO_MLXBF3) += gpio-mlxbf3.o obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o obj-$(CONFIG_GPIO_MOCKUP) += gpio-mockup.o obj-$(CONFIG_GPIO_MOXTET) += gpio-moxtet.o diff --git a/drivers/gpio/gpio-mlxbf3.c b/drivers/gpio/gpio-mlxbf3.c new file mode 100644 index 000000000000..e30cee108986 --- /dev/null +++ b/drivers/gpio/gpio-mlxbf3.c @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: GPL-2.0-only or BSD-3-Clause +/* Copyright (C) 2022 NVIDIA CORPORATION & AFFILIATES */ + +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +/* + * There are 2 YU GPIO blocks: + * gpio[0]: HOST_GPIO0->HOST_GPIO31 + * gpio[1]: HOST_GPIO32->HOST_GPIO55 + */ +#define MLXBF3_GPIO_MAX_PINS_PER_BLOCK 32 + +/* + * fw_gpio[x] block registers and their offset + */ +#define MLXBF_GPIO_FW_OUTPUT_ENABLE_SET 0x00 +#define MLXBF_GPIO_FW_DATA_OUT_SET 0x04 + +#define MLXBF_GPIO_FW_OUTPUT_ENABLE_CLEAR 0x00 +#define MLXBF_GPIO_FW_DATA_OUT_CLEAR 0x04 + +#define MLXBF_GPIO_CAUSE_RISE_EN 0x00 +#define MLXBF_GPIO_CAUSE_FALL_EN 0x04 +#define MLXBF_GPIO_READ_DATA_IN 0x08 + +#define MLXBF_GPIO_CAUSE_OR_CAUSE_EVTEN0 0x00 +#define MLXBF_GPIO_CAUSE_OR_EVTEN0 0x14 +#define MLXBF_GPIO_CAUSE_OR_CLRCAUSE 0x18 + +struct mlxbf3_gpio_context { + struct gpio_chip gc; + + /* YU GPIO block address */ + void __iomem *gpio_set_io; + void __iomem *gpio_clr_io; + void __iomem *gpio_io; + + /* YU GPIO cause block address */ + void __iomem *gpio_cause_io; +}; + +static void mlxbf3_gpio_irq_enable(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc); + irq_hw_number_t offset = irqd_to_hwirq(irqd); + unsigned long flags; + u32 val; + + gpiochip_enable_irq(gc, offset); + + raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags); + writel(BIT(offset), gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CLRCAUSE); + + val = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); + val |= BIT(offset); + writel(val, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); + raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); +} + +static void mlxbf3_gpio_irq_disable(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc); + irq_hw_number_t offset = irqd_to_hwirq(irqd); + unsigned long flags; + u32 val; + + raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags); + val = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); + val &= ~BIT(offset); + writel(val, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); + raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); + + gpiochip_disable_irq(gc, offset); +} + +static irqreturn_t mlxbf3_gpio_irq_handler(int irq, void *ptr) +{ + struct mlxbf3_gpio_context *gs = ptr; + struct gpio_chip *gc = &gs->gc; + unsigned long pending; + u32 level; + + pending = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CAUSE_EVTEN0); + writel(pending, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CLRCAUSE); + + for_each_set_bit(level, &pending, gc->ngpio) + generic_handle_domain_irq(gc->irq.domain, level); + + return IRQ_RETVAL(pending); +} + +static int +mlxbf3_gpio_irq_set_type(struct irq_data *irqd, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc); + irq_hw_number_t offset = irqd_to_hwirq(irqd); + unsigned long flags; + u32 val; + + raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags); + + switch (type & IRQ_TYPE_SENSE_MASK) { + case IRQ_TYPE_EDGE_BOTH: + val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN); + val |= BIT(offset); + writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN); + val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN); + val |= BIT(offset); + writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN); + break; + case IRQ_TYPE_EDGE_RISING: + val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN); + val |= BIT(offset); + writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN); + break; + case IRQ_TYPE_EDGE_FALLING: + val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN); + val |= BIT(offset); + writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN); + break; + default: + raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); + return -EINVAL; + } + + raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); + + irq_set_handler_locked(irqd, handle_edge_irq); + + return 0; +} + +/* This function needs to be defined for handle_edge_irq() */ +static void mlxbf3_gpio_irq_ack(struct irq_data *data) +{ +} + +static const struct irq_chip gpio_mlxbf3_irqchip = { + .name = "MLNXBF33", + .irq_ack = mlxbf3_gpio_irq_ack, + .irq_set_type = mlxbf3_gpio_irq_set_type, + .irq_enable = mlxbf3_gpio_irq_enable, + .irq_disable = mlxbf3_gpio_irq_disable, + .flags = IRQCHIP_IMMUTABLE, + GPIOCHIP_IRQ_RESOURCE_HELPERS, +}; + +static int mlxbf3_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mlxbf3_gpio_context *gs; + struct gpio_irq_chip *girq; + struct gpio_chip *gc; + int ret, irq; + + gs = devm_kzalloc(dev, sizeof(*gs), GFP_KERNEL); + if (!gs) + return -ENOMEM; + + gs->gpio_io = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(gs->gpio_io)) + return PTR_ERR(gs->gpio_io); + + gs->gpio_cause_io = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(gs->gpio_cause_io)) + return PTR_ERR(gs->gpio_cause_io); + + gs->gpio_set_io = devm_platform_ioremap_resource(pdev, 2); + if (IS_ERR(gs->gpio_set_io)) + return PTR_ERR(gs->gpio_set_io); + + gs->gpio_clr_io = devm_platform_ioremap_resource(pdev, 3); + if (IS_ERR(gs->gpio_clr_io)) + return PTR_ERR(gs->gpio_clr_io); + gc = &gs->gc; + + ret = bgpio_init(gc, dev, 4, + gs->gpio_io + MLXBF_GPIO_READ_DATA_IN, + gs->gpio_set_io + MLXBF_GPIO_FW_DATA_OUT_SET, + gs->gpio_clr_io + MLXBF_GPIO_FW_DATA_OUT_CLEAR, + gs->gpio_set_io + MLXBF_GPIO_FW_OUTPUT_ENABLE_SET, + gs->gpio_clr_io + MLXBF_GPIO_FW_OUTPUT_ENABLE_CLEAR, 0); + + gc->request = gpiochip_generic_request; + gc->free = gpiochip_generic_free; + gc->owner = THIS_MODULE; + + irq = platform_get_irq(pdev, 0); + if (irq >= 0) { + girq = &gs->gc.irq; + gpio_irq_chip_set_chip(girq, &gpio_mlxbf3_irqchip); + girq->default_type = IRQ_TYPE_NONE; + /* This will let us handle the parent IRQ in the driver */ + girq->num_parents = 0; + girq->parents = NULL; + girq->parent_handler = NULL; + girq->handler = handle_bad_irq; + + /* + * Directly request the irq here instead of passing + * a flow-handler because the irq is shared. + */ + ret = devm_request_irq(dev, irq, mlxbf3_gpio_irq_handler, + IRQF_SHARED, dev_name(dev), gs); + if (ret) + return dev_err_probe(dev, ret, "failed to request IRQ"); + } + + platform_set_drvdata(pdev, gs); + + ret = devm_gpiochip_add_data(dev, &gs->gc, gs); + if (ret) + dev_err_probe(dev, ret, "Failed adding memory mapped gpiochip\n"); + + return 0; +} + +static const struct acpi_device_id mlxbf3_gpio_acpi_match[] = { + { "MLNXBF33", 0 }, + {} +}; +MODULE_DEVICE_TABLE(acpi, mlxbf3_gpio_acpi_match); + +static struct platform_driver mlxbf3_gpio_driver = { + .driver = { + .name = "mlxbf3_gpio", + .acpi_match_table = mlxbf3_gpio_acpi_match, + }, + .probe = mlxbf3_gpio_probe, +}; +module_platform_driver(mlxbf3_gpio_driver); + +MODULE_DESCRIPTION("NVIDIA BlueField-3 GPIO Driver"); +MODULE_AUTHOR("Asmaa Mnebhi <asmaa@nvidia.com>"); +MODULE_LICENSE("Dual BSD/GPL"); |