diff options
Diffstat (limited to 'drivers/gpio')
| -rw-r--r-- | drivers/gpio/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/gpio/Makefile | 1 | ||||
| -rw-r--r-- | drivers/gpio/gpio-bd70528.c | 232 | ||||
| -rw-r--r-- | drivers/gpio/gpio-cs5535.c | 2 | ||||
| -rw-r--r-- | drivers/gpio/gpio-davinci.c | 5 | ||||
| -rw-r--r-- | drivers/gpio/gpio-em.c | 33 | ||||
| -rw-r--r-- | drivers/gpio/gpio-iop.c | 1 | ||||
| -rw-r--r-- | drivers/gpio/gpiolib-of.c | 10 |
8 files changed, 267 insertions, 30 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index e4fee216d5a4..bb13c266c329 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -975,6 +975,17 @@ config GPIO_ARIZONA help Support for GPIOs on Wolfson Arizona class devices. +config GPIO_BD70528 + tristate "ROHM BD70528 GPIO support" + depends on MFD_ROHM_BD70528 + help + Support for GPIOs on ROHM BD70528 PMIC. There are four GPIOs + available on the ROHM PMIC in total. The GPIOs can also + generate interrupts. + + This driver can also be built as a module. If so, the module + will be called gpio-bd70528. + config GPIO_BD9571MWV tristate "ROHM BD9571 GPIO support" depends on MFD_BD9571MWV @@ -1301,7 +1312,7 @@ config GPIO_BT8XX The card needs to be physically altered for using it as a GPIO card. For more information on how to build a GPIO card from a BT8xx TV card, see the documentation file at - Documentation/bt8xxgpio.txt + Documentation/driver-api/bt8xxgpio.rst If unsure, say N. diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 9e400e34e300..a4e91175c708 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o +obj-$(CONFIG_GPIO_BD70528) += gpio-bd70528.o obj-$(CONFIG_GPIO_BD9571MWV) += gpio-bd9571mwv.o obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o diff --git a/drivers/gpio/gpio-bd70528.c b/drivers/gpio/gpio-bd70528.c new file mode 100644 index 000000000000..fd85605d2dab --- /dev/null +++ b/drivers/gpio/gpio-bd70528.c @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2018 ROHM Semiconductors +// gpio-bd70528.c ROHM BD70528MWV gpio driver + +#include <linux/gpio/driver.h> +#include <linux/mfd/rohm-bd70528.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define GPIO_IN_REG(offset) (BD70528_REG_GPIO1_IN + (offset) * 2) +#define GPIO_OUT_REG(offset) (BD70528_REG_GPIO1_OUT + (offset) * 2) + +struct bd70528_gpio { + struct rohm_regmap_dev chip; + struct gpio_chip gpio; +}; + +static int bd70528_set_debounce(struct bd70528_gpio *bdgpio, + unsigned int offset, unsigned int debounce) +{ + u8 val; + + switch (debounce) { + case 0: + val = BD70528_DEBOUNCE_DISABLE; + break; + case 1 ... 15: + val = BD70528_DEBOUNCE_15MS; + break; + case 16 ... 30: + val = BD70528_DEBOUNCE_30MS; + break; + case 31 ... 50: + val = BD70528_DEBOUNCE_50MS; + break; + default: + dev_err(bdgpio->chip.dev, + "Invalid debouce value %u\n", debounce); + return -EINVAL; + } + return regmap_update_bits(bdgpio->chip.regmap, GPIO_IN_REG(offset), + BD70528_DEBOUNCE_MASK, val); +} + +static int bd70528_get_direction(struct gpio_chip *chip, unsigned int offset) +{ + struct bd70528_gpio *bdgpio = gpiochip_get_data(chip); + int val, ret; + + /* Do we need to do something to IRQs here? */ + ret = regmap_read(bdgpio->chip.regmap, GPIO_OUT_REG(offset), &val); + if (ret) { + dev_err(bdgpio->chip.dev, "Could not read gpio direction\n"); + return ret; + } + + return !(val & BD70528_GPIO_OUT_EN_MASK); +} + +static int bd70528_gpio_set_config(struct gpio_chip *chip, unsigned int offset, + unsigned long config) +{ + struct bd70528_gpio *bdgpio = gpiochip_get_data(chip); + + switch (pinconf_to_config_param(config)) { + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + return regmap_update_bits(bdgpio->chip.regmap, + GPIO_OUT_REG(offset), + BD70528_GPIO_DRIVE_MASK, + BD70528_GPIO_OPEN_DRAIN); + break; + case PIN_CONFIG_DRIVE_PUSH_PULL: + return regmap_update_bits(bdgpio->chip.regmap, + GPIO_OUT_REG(offset), + BD70528_GPIO_DRIVE_MASK, + BD70528_GPIO_PUSH_PULL); + break; + case PIN_CONFIG_INPUT_DEBOUNCE: + return bd70528_set_debounce(bdgpio, offset, + pinconf_to_config_argument(config)); + break; + default: + break; + } + return -ENOTSUPP; +} + +static int bd70528_direction_input(struct gpio_chip *chip, unsigned int offset) +{ + struct bd70528_gpio *bdgpio = gpiochip_get_data(chip); + + /* Do we need to do something to IRQs here? */ + return regmap_update_bits(bdgpio->chip.regmap, GPIO_OUT_REG(offset), + BD70528_GPIO_OUT_EN_MASK, + BD70528_GPIO_OUT_DISABLE); +} + +static void bd70528_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + int ret; + struct bd70528_gpio *bdgpio = gpiochip_get_data(chip); + u8 val = (value) ? BD70528_GPIO_OUT_HI : BD70528_GPIO_OUT_LO; + + ret = regmap_update_bits(bdgpio->chip.regmap, GPIO_OUT_REG(offset), + BD70528_GPIO_OUT_MASK, val); + if (ret) + dev_err(bdgpio->chip.dev, "Could not set gpio to %d\n", value); +} + +static int bd70528_direction_output(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct bd70528_gpio *bdgpio = gpiochip_get_data(chip); + + bd70528_gpio_set(chip, offset, value); + return regmap_update_bits(bdgpio->chip.regmap, GPIO_OUT_REG(offset), + BD70528_GPIO_OUT_EN_MASK, + BD70528_GPIO_OUT_ENABLE); +} + +#define GPIO_IN_STATE_MASK(offset) (BD70528_GPIO_IN_STATE_BASE << (offset)) + +static int bd70528_gpio_get_o(struct bd70528_gpio *bdgpio, unsigned int offset) +{ + int ret; + unsigned int val; + + ret = regmap_read(bdgpio->chip.regmap, GPIO_OUT_REG(offset), &val); + if (!ret) + ret = !!(val & BD70528_GPIO_OUT_MASK); + else + dev_err(bdgpio->chip.dev, "GPIO (out) state read failed\n"); + + return ret; +} + +static int bd70528_gpio_get_i(struct bd70528_gpio *bdgpio, unsigned int offset) +{ + unsigned int val; + int ret; + + ret = regmap_read(bdgpio->chip.regmap, BD70528_REG_GPIO_STATE, &val); + + if (!ret) + ret = !(val & GPIO_IN_STATE_MASK(offset)); + else + dev_err(bdgpio->chip.dev, "GPIO (in) state read failed\n"); + + return ret; +} + +static int bd70528_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + int ret = -EINVAL; + struct bd70528_gpio *bdgpio = gpiochip_get_data(chip); + + /* + * There is a race condition where someone might be changing the + * GPIO direction after we get it but before we read the value. But + * application design where GPIO direction may be changed just when + * we read GPIO value would be pointless as reader could not know + * whether the returned high/low state is caused by input or output. + * Or then there must be other ways to mitigate the issue. Thus + * locking would make no sense. + */ + ret = bd70528_get_direction(chip, offset); + if (ret == 0) + ret = bd70528_gpio_get_o(bdgpio, offset); + else if (ret == 1) + ret = bd70528_gpio_get_i(bdgpio, offset); + else + dev_err(bdgpio->chip.dev, "failed to read GPIO direction\n"); + + return ret; +} + +static int bd70528_probe(struct platform_device *pdev) +{ + struct bd70528_gpio *bdgpio; + struct rohm_regmap_dev *bd70528; + int ret; + + bd70528 = dev_get_drvdata(pdev->dev.parent); + if (!bd70528) { + dev_err(&pdev->dev, "No MFD driver data\n"); + return -EINVAL; + } + + bdgpio = devm_kzalloc(&pdev->dev, sizeof(*bdgpio), + GFP_KERNEL); + if (!bdgpio) + return -ENOMEM; + bdgpio->chip.dev = &pdev->dev; + bdgpio->gpio.parent = pdev->dev.parent; + bdgpio->gpio.label = "bd70528-gpio"; + bdgpio->gpio.owner = THIS_MODULE; + bdgpio->gpio.get_direction = bd70528_get_direction; + bdgpio->gpio.direction_input = bd70528_direction_input; + bdgpio->gpio.direction_output = bd70528_direction_output; + bdgpio->gpio.set_config = bd70528_gpio_set_config; + bdgpio->gpio.can_sleep = true; + bdgpio->gpio.get = bd70528_gpio_get; + bdgpio->gpio.set = bd70528_gpio_set; + bdgpio->gpio.ngpio = 4; + bdgpio->gpio.base = -1; +#ifdef CONFIG_OF_GPIO + bdgpio->gpio.of_node = pdev->dev.parent->of_node; +#endif + bdgpio->chip.regmap = bd70528->regmap; + + ret = devm_gpiochip_add_data(&pdev->dev, &bdgpio->gpio, + bdgpio); + if (ret) + dev_err(&pdev->dev, "gpio_init: Failed to add bd70528-gpio\n"); + + return ret; +} + +static struct platform_driver bd70528_gpio = { + .driver = { + .name = "bd70528-gpio" + }, + .probe = bd70528_probe, +}; + +module_platform_driver(bd70528_gpio); + +MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); +MODULE_DESCRIPTION("BD70528 voltage regulator driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-cs5535.c b/drivers/gpio/gpio-cs5535.c index 3611a0571667..53b24e3ae7de 100644 --- a/drivers/gpio/gpio-cs5535.c +++ b/drivers/gpio/gpio-cs5535.c @@ -41,7 +41,7 @@ MODULE_PARM_DESC(mask, "GPIO channel mask."); /* * FIXME: convert this singleton driver to use the state container - * design pattern, see Documentation/driver-model/design-patterns.rst + * design pattern, see Documentation/driver-api/driver-model/design-patterns.rst */ static struct cs5535_gpio_chip { struct gpio_chip chip; diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c index fc494a84a29d..e0b025689625 100644 --- a/drivers/gpio/gpio-davinci.c +++ b/drivers/gpio/gpio-davinci.c @@ -238,8 +238,9 @@ static int davinci_gpio_probe(struct platform_device *pdev) for (i = 0; i < nirq; i++) { chips->irqs[i] = platform_get_irq(pdev, i); if (chips->irqs[i] < 0) { - dev_info(dev, "IRQ not populated, err = %d\n", - chips->irqs[i]); + if (chips->irqs[i] != -EPROBE_DEFER) + dev_info(dev, "IRQ not populated, err = %d\n", + chips->irqs[i]); return chips->irqs[i]; } } diff --git a/drivers/gpio/gpio-em.c b/drivers/gpio/gpio-em.c index b6af705a4e5f..a87951293aaa 100644 --- a/drivers/gpio/gpio-em.c +++ b/drivers/gpio/gpio-em.c @@ -259,6 +259,13 @@ static const struct irq_domain_ops em_gio_irq_domain_ops = { .xlate = irq_domain_xlate_twocell, }; +static void em_gio_irq_domain_remove(void *data) +{ + struct irq_domain *domain = data; + + irq_domain_remove(domain); +} + static int em_gio_probe(struct platform_device *pdev) { struct em_gio_priv *p; @@ -333,39 +340,30 @@ static int em_gio_probe(struct platform_device *pdev) return -ENXIO; } + ret = devm_add_action_or_reset(&pdev->dev, em_gio_irq_domain_remove, + p->irq_domain); + if (ret) + return ret; + if (devm_request_irq(&pdev->dev, irq[0]->start, em_gio_irq_handler, 0, name, p)) { dev_err(&pdev->dev, "failed to request low IRQ\n"); - ret = -ENOENT; - goto err1; + return -ENOENT; } if (devm_request_irq(&pdev->dev, irq[1]->start, em_gio_irq_handler, 0, name, p)) { dev_err(&pdev->dev, "failed to request high IRQ\n"); - ret = -ENOENT; - goto err1; + return -ENOENT; } ret = devm_gpiochip_add_data(&pdev->dev, gpio_chip, p); if (ret) { dev_err(&pdev->dev, "failed to add GPIO controller\n"); - goto err1; + return ret; } return 0; - -err1: - irq_domain_remove(p->irq_domain); - return ret; -} - -static int em_gio_remove(struct platform_device *pdev) -{ - struct em_gio_priv *p = platform_get_drvdata(pdev); - - irq_domain_remove(p->irq_domain); - return 0; } static const struct of_device_id em_gio_dt_ids[] = { @@ -376,7 +374,6 @@ MODULE_DEVICE_TABLE(of, em_gio_dt_ids); static struct platform_driver em_gio_device_driver = { .probe = em_gio_probe, - .remove = em_gio_remove, .driver = { .name = "em_gio", .of_match_table = em_gio_dt_ids, diff --git a/drivers/gpio/gpio-iop.c b/drivers/gpio/gpio-iop.c index e355c5961eb9..7390b5ca09e3 100644 --- a/drivers/gpio/gpio-iop.c +++ b/drivers/gpio/gpio-iop.c @@ -36,6 +36,7 @@ static int iop3xx_gpio_probe(struct platform_device *pdev) gc->base = 0; gc->owner = THIS_MODULE; + gc->label = "gpio-iop"; return devm_gpiochip_add_data(&pdev->dev, gc, NULL); } diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index f974075ff00e..567fb98c0892 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -118,15 +118,8 @@ static void of_gpio_flags_quirks(struct device_node *np, * Legacy handling of SPI active high chip select. If we have a * property named "cs-gpios" we need to inspect the child node * to determine if the flags should have inverted semantics. - * - * This does not apply to an SPI device named "spi-gpio", because - * these have traditionally obtained their own GPIOs by parsing - * the device tree directly and did not respect any "spi-cs-high" - * property on the SPI bus children. */ - if (IS_ENABLED(CONFIG_SPI_MASTER) && - !strcmp(propname, "cs-gpios") && - !of_device_is_compatible(np, "spi-gpio") && + if (IS_ENABLED(CONFIG_SPI_MASTER) && !strcmp(propname, "cs-gpios") && of_property_read_bool(np, "cs-gpios")) { struct device_node *child; u32 cs; @@ -161,6 +154,7 @@ static void of_gpio_flags_quirks(struct device_node *np, of_node_full_name(child)); *flags |= OF_GPIO_ACTIVE_LOW; } + of_node_put(child); break; } } |