diff options
Diffstat (limited to 'drivers/firmware/efi/libstub/mem.c')
-rw-r--r-- | drivers/firmware/efi/libstub/mem.c | 309 |
1 files changed, 309 insertions, 0 deletions
diff --git a/drivers/firmware/efi/libstub/mem.c b/drivers/firmware/efi/libstub/mem.c new file mode 100644 index 000000000000..869a79c8946f --- /dev/null +++ b/drivers/firmware/efi/libstub/mem.c @@ -0,0 +1,309 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/efi.h> +#include <asm/efi.h> + +#include "efistub.h" + +#define EFI_MMAP_NR_SLACK_SLOTS 8 + +static inline bool mmap_has_headroom(unsigned long buff_size, + unsigned long map_size, + unsigned long desc_size) +{ + unsigned long slack = buff_size - map_size; + + return slack / desc_size >= EFI_MMAP_NR_SLACK_SLOTS; +} + +/** + * efi_get_memory_map() - get memory map + * @map: on return pointer to memory map + * + * Retrieve the UEFI memory map. The allocated memory leaves room for + * up to EFI_MMAP_NR_SLACK_SLOTS additional memory map entries. + * + * Return: status code + */ +efi_status_t efi_get_memory_map(struct efi_boot_memmap *map) +{ + efi_memory_desc_t *m = NULL; + efi_status_t status; + unsigned long key; + u32 desc_version; + + *map->desc_size = sizeof(*m); + *map->map_size = *map->desc_size * 32; + *map->buff_size = *map->map_size; +again: + status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, + *map->map_size, (void **)&m); + if (status != EFI_SUCCESS) + goto fail; + + *map->desc_size = 0; + key = 0; + status = efi_bs_call(get_memory_map, map->map_size, m, + &key, map->desc_size, &desc_version); + if (status == EFI_BUFFER_TOO_SMALL || + !mmap_has_headroom(*map->buff_size, *map->map_size, + *map->desc_size)) { + efi_bs_call(free_pool, m); + /* + * Make sure there is some entries of headroom so that the + * buffer can be reused for a new map after allocations are + * no longer permitted. Its unlikely that the map will grow to + * exceed this headroom once we are ready to trigger + * ExitBootServices() + */ + *map->map_size += *map->desc_size * EFI_MMAP_NR_SLACK_SLOTS; + *map->buff_size = *map->map_size; + goto again; + } + + if (status == EFI_SUCCESS) { + if (map->key_ptr) + *map->key_ptr = key; + if (map->desc_ver) + *map->desc_ver = desc_version; + } else { + efi_bs_call(free_pool, m); + } + +fail: + *map->map = m; + return status; +} + +/** + * efi_allocate_pages() - Allocate memory pages + * @size: minimum number of bytes to allocate + * @addr: On return the address of the first allocated page. The first + * allocated page has alignment EFI_ALLOC_ALIGN which is an + * architecture dependent multiple of the page size. + * @max: the address that the last allocated memory page shall not + * exceed + * + * Allocate pages as EFI_LOADER_DATA. The allocated pages are aligned according + * to EFI_ALLOC_ALIGN. The last allocated page will not exceed the address + * given by @max. + * + * Return: status code + */ +efi_status_t efi_allocate_pages(unsigned long size, unsigned long *addr, + unsigned long max) +{ + efi_physical_addr_t alloc_addr = ALIGN_DOWN(max + 1, EFI_ALLOC_ALIGN) - 1; + int slack = EFI_ALLOC_ALIGN / EFI_PAGE_SIZE - 1; + efi_status_t status; + + size = round_up(size, EFI_ALLOC_ALIGN); + status = efi_bs_call(allocate_pages, EFI_ALLOCATE_MAX_ADDRESS, + EFI_LOADER_DATA, size / EFI_PAGE_SIZE + slack, + &alloc_addr); + if (status != EFI_SUCCESS) + return status; + + *addr = ALIGN((unsigned long)alloc_addr, EFI_ALLOC_ALIGN); + + if (slack > 0) { + int l = (alloc_addr % EFI_ALLOC_ALIGN) / EFI_PAGE_SIZE; + + if (l) { + efi_bs_call(free_pages, alloc_addr, slack - l + 1); + slack = l - 1; + } + if (slack) + efi_bs_call(free_pages, *addr + size, slack); + } + return EFI_SUCCESS; +} +/** + * efi_low_alloc_above() - allocate pages at or above given address + * @size: size of the memory area to allocate + * @align: minimum alignment of the allocated memory area. It should + * a power of two. + * @addr: on exit the address of the allocated memory + * @min: minimum address to used for the memory allocation + * + * Allocate at the lowest possible address that is not below @min as + * EFI_LOADER_DATA. The allocated pages are aligned according to @align but at + * least EFI_ALLOC_ALIGN. The first allocated page will not below the address + * given by @min. + * + * Return: status code + */ +efi_status_t efi_low_alloc_above(unsigned long size, unsigned long align, + unsigned long *addr, unsigned long min) +{ + unsigned long map_size, desc_size, buff_size; + efi_memory_desc_t *map; + efi_status_t status; + unsigned long nr_pages; + int i; + struct efi_boot_memmap boot_map; + + boot_map.map = ↦ + boot_map.map_size = &map_size; + boot_map.desc_size = &desc_size; + boot_map.desc_ver = NULL; + boot_map.key_ptr = NULL; + boot_map.buff_size = &buff_size; + + status = efi_get_memory_map(&boot_map); + if (status != EFI_SUCCESS) + goto fail; + + /* + * Enforce minimum alignment that EFI or Linux requires when + * requesting a specific address. We are doing page-based (or + * larger) allocations, and both the address and size must meet + * alignment constraints. + */ + if (align < EFI_ALLOC_ALIGN) + align = EFI_ALLOC_ALIGN; + + size = round_up(size, EFI_ALLOC_ALIGN); + nr_pages = size / EFI_PAGE_SIZE; + for (i = 0; i < map_size / desc_size; i++) { + efi_memory_desc_t *desc; + unsigned long m = (unsigned long)map; + u64 start, end; + + desc = efi_early_memdesc_ptr(m, desc_size, i); + + if (desc->type != EFI_CONVENTIONAL_MEMORY) + continue; + + if (efi_soft_reserve_enabled() && + (desc->attribute & EFI_MEMORY_SP)) + continue; + + if (desc->num_pages < nr_pages) + continue; + + start = desc->phys_addr; + end = start + desc->num_pages * EFI_PAGE_SIZE; + + if (start < min) + start = min; + + start = round_up(start, align); + if ((start + size) > end) + continue; + + status = efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS, + EFI_LOADER_DATA, nr_pages, &start); + if (status == EFI_SUCCESS) { + *addr = start; + break; + } + } + + if (i == map_size / desc_size) + status = EFI_NOT_FOUND; + + efi_bs_call(free_pool, map); +fail: + return status; +} + +/** + * efi_free() - free memory pages + * @size: size of the memory area to free in bytes + * @addr: start of the memory area to free (must be EFI_PAGE_SIZE + * aligned) + * + * @size is rounded up to a multiple of EFI_ALLOC_ALIGN which is an + * architecture specific multiple of EFI_PAGE_SIZE. So this function should + * only be used to return pages allocated with efi_allocate_pages() or + * efi_low_alloc_above(). + */ +void efi_free(unsigned long size, unsigned long addr) +{ + unsigned long nr_pages; + + if (!size) + return; + + nr_pages = round_up(size, EFI_ALLOC_ALIGN) / EFI_PAGE_SIZE; + efi_bs_call(free_pages, addr, nr_pages); +} + +/** + * efi_relocate_kernel() - copy memory area + * @image_addr: pointer to address of memory area to copy + * @image_size: size of memory area to copy + * @alloc_size: minimum size of memory to allocate, must be greater or + * equal to image_size + * @preferred_addr: preferred target address + * @alignment: minimum alignment of the allocated memory area. It + * should be a power of two. + * @min_addr: minimum target address + * + * Copy a memory area to a newly allocated memory area aligned according + * to @alignment but at least EFI_ALLOC_ALIGN. If the preferred address + * is not available, the allocated address will not be below @min_addr. + * On exit, @image_addr is updated to the target copy address that was used. + * + * This function is used to copy the Linux kernel verbatim. It does not apply + * any relocation changes. + * + * Return: status code + */ +efi_status_t efi_relocate_kernel(unsigned long *image_addr, + unsigned long image_size, + unsigned long alloc_size, + unsigned long preferred_addr, + unsigned long alignment, + unsigned long min_addr) +{ + unsigned long cur_image_addr; + unsigned long new_addr = 0; + efi_status_t status; + unsigned long nr_pages; + efi_physical_addr_t efi_addr = preferred_addr; + + if (!image_addr || !image_size || !alloc_size) + return EFI_INVALID_PARAMETER; + if (alloc_size < image_size) + return EFI_INVALID_PARAMETER; + + cur_image_addr = *image_addr; + + /* + * The EFI firmware loader could have placed the kernel image + * anywhere in memory, but the kernel has restrictions on the + * max physical address it can run at. Some architectures + * also have a prefered address, so first try to relocate + * to the preferred address. If that fails, allocate as low + * as possible while respecting the required alignment. + */ + nr_pages = round_up(alloc_size, EFI_ALLOC_ALIGN) / EFI_PAGE_SIZE; + status = efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS, + EFI_LOADER_DATA, nr_pages, &efi_addr); + new_addr = efi_addr; + /* + * If preferred address allocation failed allocate as low as + * possible. + */ + if (status != EFI_SUCCESS) { + status = efi_low_alloc_above(alloc_size, alignment, &new_addr, + min_addr); + } + if (status != EFI_SUCCESS) { + pr_efi_err("Failed to allocate usable memory for kernel.\n"); + return status; + } + + /* + * We know source/dest won't overlap since both memory ranges + * have been allocated by UEFI, so we can safely use memcpy. + */ + memcpy((void *)new_addr, (void *)cur_image_addr, image_size); + + /* Return the new address of the relocated image. */ + *image_addr = new_addr; + + return status; +} |