diff options
Diffstat (limited to 'drivers/extcon')
| -rw-r--r-- | drivers/extcon/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/extcon/extcon-arizona.c | 810 | ||||
| -rw-r--r-- | drivers/extcon/extcon-gpio.c | 2 | ||||
| -rw-r--r-- | drivers/extcon/extcon-max77693.c | 981 | ||||
| -rw-r--r-- | drivers/extcon/extcon-max8997.c | 734 |
5 files changed, 1972 insertions, 559 deletions
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index 07122a9ef36e..5168a1324a65 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -29,7 +29,7 @@ config EXTCON_ADC_JACK config EXTCON_MAX77693 tristate "MAX77693 EXTCON Support" - depends on MFD_MAX77693 + depends on MFD_MAX77693 && INPUT select IRQ_DOMAIN select REGMAP_I2C help @@ -47,7 +47,7 @@ config EXTCON_MAX8997 config EXTCON_ARIZONA tristate "Wolfson Arizona EXTCON support" - depends on MFD_ARIZONA && INPUT + depends on MFD_ARIZONA && INPUT && SND_SOC help Say Y here to enable support for external accessory detection with Wolfson Arizona devices. These are audio CODECs with diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 414aed50b1bc..dc357a4051f6 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -27,12 +27,18 @@ #include <linux/regulator/consumer.h> #include <linux/extcon.h> +#include <sound/soc.h> + #include <linux/mfd/arizona/core.h> #include <linux/mfd/arizona/pdata.h> #include <linux/mfd/arizona/registers.h> #define ARIZONA_NUM_BUTTONS 6 +#define ARIZONA_ACCDET_MODE_MIC 0 +#define ARIZONA_ACCDET_MODE_HPL 1 +#define ARIZONA_ACCDET_MODE_HPR 2 + struct arizona_extcon_info { struct device *dev; struct arizona *arizona; @@ -45,17 +51,28 @@ struct arizona_extcon_info { int micd_num_modes; bool micd_reva; + bool micd_clamp; + + struct delayed_work hpdet_work; + + bool hpdet_active; + bool hpdet_done; + + int num_hpdet_res; + unsigned int hpdet_res[3]; bool mic; bool detecting; int jack_flips; + int hpdet_ip; + struct extcon_dev edev; }; static const struct arizona_micd_config micd_default_modes[] = { - { ARIZONA_ACCDET_SRC, 1 << ARIZONA_MICD_BIAS_SRC_SHIFT, 0 }, { 0, 2 << ARIZONA_MICD_BIAS_SRC_SHIFT, 1 }, + { ARIZONA_ACCDET_SRC, 1 << ARIZONA_MICD_BIAS_SRC_SHIFT, 0 }, }; static struct { @@ -73,11 +90,13 @@ static struct { #define ARIZONA_CABLE_MECHANICAL 0 #define ARIZONA_CABLE_MICROPHONE 1 #define ARIZONA_CABLE_HEADPHONE 2 +#define ARIZONA_CABLE_LINEOUT 3 static const char *arizona_cable[] = { "Mechanical", "Microphone", "Headphone", + "Line-out", NULL, }; @@ -85,8 +104,9 @@ static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode) { struct arizona *arizona = info->arizona; - gpio_set_value_cansleep(arizona->pdata.micd_pol_gpio, - info->micd_modes[mode].gpio); + if (arizona->pdata.micd_pol_gpio > 0) + gpio_set_value_cansleep(arizona->pdata.micd_pol_gpio, + info->micd_modes[mode].gpio); regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, ARIZONA_MICD_BIAS_SRC_MASK, info->micd_modes[mode].bias); @@ -98,19 +118,70 @@ static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode) dev_dbg(arizona->dev, "Set jack polarity to %d\n", mode); } +static const char *arizona_extcon_get_micbias(struct arizona_extcon_info *info) +{ + switch (info->micd_modes[0].bias >> ARIZONA_MICD_BIAS_SRC_SHIFT) { + case 1: + return "MICBIAS1"; + case 2: + return "MICBIAS2"; + case 3: + return "MICBIAS3"; + default: + return "MICVDD"; + } +} + +static void arizona_extcon_pulse_micbias(struct arizona_extcon_info *info) +{ + struct arizona *arizona = info->arizona; + const char *widget = arizona_extcon_get_micbias(info); + struct snd_soc_dapm_context *dapm = arizona->dapm; + int ret; + + mutex_lock(&dapm->card->dapm_mutex); + + ret = snd_soc_dapm_force_enable_pin(dapm, widget); + if (ret != 0) + dev_warn(arizona->dev, "Failed to enable %s: %d\n", + widget, ret); + + mutex_unlock(&dapm->card->dapm_mutex); + + snd_soc_dapm_sync(dapm); + + if (!arizona->pdata.micd_force_micbias) { + mutex_lock(&dapm->card->dapm_mutex); + + ret = snd_soc_dapm_disable_pin(arizona->dapm, widget); + if (ret != 0) + dev_warn(arizona->dev, "Failed to disable %s: %d\n", + widget, ret); + + mutex_unlock(&dapm->card->dapm_mutex); + + snd_soc_dapm_sync(dapm); + } +} + static void arizona_start_mic(struct arizona_extcon_info *info) { struct arizona *arizona = info->arizona; bool change; int ret; - info->detecting = true; - info->mic = false; - info->jack_flips = 0; - /* Microphone detection can't use idle mode */ pm_runtime_get(info->dev); + if (info->detecting) { + ret = regulator_allow_bypass(info->micvdd, false); + if (ret != 0) { + dev_err(arizona->dev, + "Failed to regulate MICVDD: %d\n", + ret); + } + } + ret = regulator_enable(info->micvdd); if (ret != 0) { dev_err(arizona->dev, "Failed to enable MICVDD: %d\n", @@ -123,6 +194,12 @@ static void arizona_start_mic(struct arizona_extcon_info *info) regmap_write(arizona->regmap, 0x80, 0x0); } + regmap_update_bits(arizona->regmap, + ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); + + arizona_extcon_pulse_micbias(info); + regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, ARIZONA_MICD_ENA, ARIZONA_MICD_ENA, &change); @@ -135,18 +212,39 @@ static void arizona_start_mic(struct arizona_extcon_info *info) static void arizona_stop_mic(struct arizona_extcon_info *info) { struct arizona *arizona = info->arizona; + const char *widget = arizona_extcon_get_micbias(info); + struct snd_soc_dapm_context *dapm = arizona->dapm; bool change; + int ret; regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, ARIZONA_MICD_ENA, 0, &change); + mutex_lock(&dapm->card->dapm_mutex); + + ret = snd_soc_dapm_disable_pin(dapm, widget); + if (ret != 0) + dev_warn(arizona->dev, + "Failed to disable %s: %d\n", + widget, ret); + + mutex_unlock(&dapm->card->dapm_mutex); + + snd_soc_dapm_sync(dapm); + if (info->micd_reva) { regmap_write(arizona->regmap, 0x80, 0x3); regmap_write(arizona->regmap, 0x294, 2); regmap_write(arizona->regmap, 0x80, 0x0); } + ret = regulator_allow_bypass(info->micvdd, true); + if (ret != 0) { + dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n", + ret); + } + if (change) { regulator_disable(info->micvdd); pm_runtime_mark_last_busy(info->dev); @@ -154,6 +252,478 @@ static void arizona_stop_mic(struct arizona_extcon_info *info) } } +static struct { + unsigned int factor_a; + unsigned int factor_b; +} arizona_hpdet_b_ranges[] = { + { 5528, 362464 }, + { 11084, 6186851 }, + { 11065, 65460395 }, +}; + +static struct { + int min; + int max; +} arizona_hpdet_c_ranges[] = { + { 0, 30 }, + { 8, 100 }, + { 100, 1000 }, + { 1000, 10000 }, +}; + +static int arizona_hpdet_read(struct arizona_extcon_info *info) +{ + struct arizona *arizona = info->arizona; + unsigned int val, range; + int ret; + + ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2, &val); + if (ret != 0) { + dev_err(arizona->dev, "Failed to read HPDET status: %d\n", + ret); + return ret; + } + + switch (info->hpdet_ip) { + case 0: + if (!(val & ARIZONA_HP_DONE)) { + dev_err(arizona->dev, "HPDET did not complete: %x\n", + val); + return -EAGAIN; + } + + val &= ARIZONA_HP_LVL_MASK; + break; + + case 1: + if (!(val & ARIZONA_HP_DONE_B)) { + dev_err(arizona->dev, "HPDET did not complete: %x\n", + val); + return -EAGAIN; + } + + ret = regmap_read(arizona->regmap, ARIZONA_HP_DACVAL, &val); + if (ret != 0) { + dev_err(arizona->dev, "Failed to read HP value: %d\n", + ret); + return -EAGAIN; + } + + regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, + &range); + range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK) + >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT; + + if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 && + (val < 100 || val > 0x3fb)) { + range++; + dev_dbg(arizona->dev, "Moving to HPDET range %d\n", + range); + regmap_update_bits(arizona->regmap, + ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_IMPEDANCE_RANGE_MASK, + range << + ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); + return -EAGAIN; + } + + /* If we go out of range report top of range */ + if (val < 100 || val > 0x3fb) { + dev_dbg(arizona->dev, "Measurement out of range\n"); + return 10000; + } + + dev_dbg(arizona->dev, "HPDET read %d in range %d\n", + val, range); + + val = arizona_hpdet_b_ranges[range].factor_b + / ((val * 100) - + arizona_hpdet_b_ranges[range].factor_a); + break; + + default: + dev_warn(arizona->dev, "Unknown HPDET IP revision %d\n", + info->hpdet_ip); + case 2: + if (!(val & ARIZONA_HP_DONE_B)) { + dev_err(arizona->dev, "HPDET did not complete: %x\n", + val); + return -EAGAIN; + } + + val &= ARIZONA_HP_LVL_B_MASK; + + regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, + &range); + range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK) + >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT; + + /* Skip up or down a range? */ + if (range && (val < arizona_hpdet_c_ranges[range].min)) { + range--; + dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n", + arizona_hpdet_c_ranges[range].min, + arizona_hpdet_c_ranges[range].max); + regmap_update_bits(arizona->regmap, + ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_IMPEDANCE_RANGE_MASK, + range << + ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); + return -EAGAIN; + } + + if (range < ARRAY_SIZE(arizona_hpdet_c_ranges) - 1 && + (val >= arizona_hpdet_c_ranges[range].max)) { + range++; + dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n", + arizona_hpdet_c_ranges[range].min, + arizona_hpdet_c_ranges[range].max); + regmap_update_bits(arizona->regmap, + ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_IMPEDANCE_RANGE_MASK, + range << + ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); + return -EAGAIN; + } + } + + dev_dbg(arizona->dev, "HP impedance %d ohms\n", val); + return val; +} + +static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading) +{ + struct arizona *arizona = info->arizona; + int id_gpio = arizona->pdata.hpdet_id_gpio; + + /* + * If we're using HPDET for accessory identification we need + * to take multiple measurements, step through them in sequence. + */ + if (arizona->pdata.hpdet_acc_id) { + info->hpdet_res[info->num_hpdet_res++] = *reading; + + /* + * If the impedence is too high don't measure the + * second ground. + */ + if (info->num_hpdet_res == 1 && *reading >= 45) { + dev_dbg(arizona->dev, "Skipping ground flip\n"); + info->hpdet_res[info->num_hpdet_res++] = *reading; + } + + if (info->num_hpdet_res == 1) { + dev_dbg(arizona->dev, "Flipping ground\n"); + + regmap_update_bits(arizona->regmap, + ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_SRC, + ~info->micd_modes[0].src); + + regmap_update_bits(arizona->regmap, + ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_POLL, ARIZONA_HP_POLL); + return -EAGAIN; + } + + /* Only check the mic directly if we didn't already ID it */ + if (id_gpio && info->num_hpdet_res == 2 && + !((info->hpdet_res[0] > info->hpdet_res[1] * 2))) { + dev_dbg(arizona->dev, "Measuring mic\n"); + + regmap_update_bits(arizona->regmap, + ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_MODE_MASK | + ARIZONA_ACCDET_SRC, + ARIZONA_ACCDET_MODE_HPR | + info->micd_modes[0].src); + + gpio_set_value_cansleep(id_gpio, 1); + + regmap_update_bits(arizona->regmap, + ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_POLL, ARIZONA_HP_POLL); + return -EAGAIN; + } + + /* OK, got both. Now, compare... */ + dev_dbg(arizona->dev, "HPDET measured %d %d %d\n", + info->hpdet_res[0], info->hpdet_res[1], + info->hpdet_res[2]); + + + /* Take the headphone impedance for the main report */ + *reading = info->hpdet_res[0]; + + /* + * Either the two grounds measure differently or we + * measure the mic as high impedance. + */ + if ((info->hpdet_res[0] > info->hpdet_res[1] * 2) || + (id_gpio && info->hpdet_res[2] > 10)) { + dev_dbg(arizona->dev, "Detected mic\n"); + info->mic = true; + info->detecting = true; + } else { + dev_dbg(arizona->dev, "Detected headphone\n"); + } + + /* Make sure everything is reset back to the real polarity */ + regmap_update_bits(arizona->regmap, + ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_SRC, + info->micd_modes[0].src); + } + + return 0; +} + +static irqreturn_t arizona_hpdet_irq(int irq, void *data) +{ + struct arizona_extcon_info *info = data; + struct arizona *arizona = info->arizona; + int id_gpio = arizona->pdata.hpdet_id_gpio; + int report = ARIZONA_CABLE_HEADPHONE; + unsigned int val; + int ret, reading; + + mutex_lock(&info->lock); + + /* If we got a spurious IRQ for some reason then ignore it */ + if (!info->hpdet_active) { + dev_warn(arizona->dev, "Spurious HPDET IRQ\n"); + mutex_unlock(&info->lock); + return IRQ_NONE; + } + + /* If the cable was removed while measuring ignore the result */ + ret = extcon_get_cable_state_(&info->edev, ARIZONA_CABLE_MECHANICAL); + if (ret < 0) { + dev_err(arizona->dev, "Failed to check cable state: %d\n", + ret); + goto out; + } else if (!ret) { + dev_dbg(arizona->dev, "Ignoring HPDET for removed cable\n"); + goto done; + } + + ret = arizona_hpdet_read(info); + if (ret == -EAGAIN) { + goto out; + } else if (ret < 0) { + goto done; + } + reading = ret; + + /* Reset back to starting range */ + regmap_update_bits(arizona->regmap, + ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL, + 0); + + ret = arizona_hpdet_do_id(info, &reading); + if (ret == -EAGAIN) { + goto out; + } else if (ret < 0) { + goto done; + } + + /* Report high impedence cables as line outputs */ + if (reading >= 5000) + report = ARIZONA_CABLE_LINEOUT; + else + report = ARIZONA_CABLE_HEADPHONE; + + ret = extcon_set_cable_state_(&info->edev, report, true); + if (ret != 0) + dev_err(arizona->dev, "Failed to report HP/line: %d\n", + ret); + + mutex_lock(&arizona->dapm->card->dapm_mutex); + + ret = regmap_read(arizona->regmap, ARIZONA_OUTPUT_ENABLES_1, &val); + if (ret != 0) { + dev_err(arizona->dev, "Failed to read output enables: %d\n", + ret); + val = 0; + } + + if (!(val & (ARIZONA_OUT1L_ENA | ARIZONA_OUT1R_ENA))) { + ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, 0); + if (ret != 0) + dev_warn(arizona->dev, "Failed to undo magic: %d\n", + ret); + + ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000, 0); + if (ret != 0) + dev_warn(arizona->dev, "Failed to undo magic: %d\n", + ret); + } + + mutex_unlock(&arizona->dapm->card->dapm_mutex); + +done: + if (id_gpio) + gpio_set_value_cansleep(id_gpio, 0); + + /* Revert back to MICDET mode */ + regmap_update_bits(arizona->regmap, + ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); + + /* If we have a mic then reenable MICDET */ + if (info->mic) + arizona_start_mic(info); + + if (info->hpdet_active) { + pm_runtime_put_autosuspend(info->dev); + info->hpdet_active = false; + } + + info->hpdet_done = true; + +out: + mutex_unlock(&info->lock); + + return IRQ_HANDLED; +} + +static void arizona_identify_headphone(struct arizona_extcon_info *info) +{ + struct arizona *arizona = info->arizona; + int ret; + + if (info->hpdet_done) + return; + + dev_dbg(arizona->dev, "Starting HPDET\n"); + + /* Make sure we keep the device enabled during the measurement */ + pm_runtime_get(info->dev); + + info->hpdet_active = true; + + if (info->mic) + arizona_stop_mic(info); + + ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, 0x4000); + if (ret != 0) + dev_warn(arizona->dev, "Failed to do magic: %d\n", ret); + + ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000, 0x4000); + if (ret != 0) + dev_warn(arizona->dev, "Failed to do magic: %d\n", ret); + + ret = regmap_update_bits(arizona->regmap, + ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_MODE_MASK, + ARIZONA_ACCDET_MODE_HPL); + if (ret != 0) { + dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret); + goto err; + } + + ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_POLL, ARIZONA_HP_POLL); + if (ret != 0) { + dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n", + ret); + goto err; + } + + return; + +err: + regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); + + /* Just report headphone */ + ret = extcon_update_state(&info->edev, + 1 << ARIZONA_CABLE_HEADPHONE, + 1 << ARIZONA_CABLE_HEADPHONE); + if (ret != 0) + dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); + + if (info->mic) + arizona_start_mic(info); + + info->hpdet_active = false; +} + +static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info) +{ + struct arizona *arizona = info->arizona; + unsigned int val; + int ret; + + dev_dbg(arizona->dev, "Starting identification via HPDET\n"); + + /* Make sure we keep the device enabled during the measurement */ + pm_runtime_get_sync(info->dev); + + info->hpdet_active = true; + + arizona_extcon_pulse_micbias(info); + + mutex_lock(&arizona->dapm->card->dapm_mutex); + + ret = regmap_read(arizona->regmap, ARIZONA_OUTPUT_ENABLES_1, &val); + if (ret != 0) { + dev_err(arizona->dev, "Failed to read output enables: %d\n", + ret); + val = 0; + } + + if (!(val & (ARIZONA_OUT1L_ENA | ARIZONA_OUT1R_ENA))) { + ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, + 0x4000); + if (ret != 0) + dev_warn(arizona->dev, "Failed to do magic: %d\n", + ret); + + ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000, + 0x4000); + if (ret != 0) + dev_warn(arizona->dev, "Failed to do magic: %d\n", + ret); + } + + mutex_unlock(&arizona->dapm->card->dapm_mutex); + + ret = regmap_update_bits(arizona->regmap, + ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK, + info->micd_modes[0].src | + ARIZONA_ACCDET_MODE_HPL); + if (ret != 0) { + dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret); + goto err; + } + + ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_POLL, ARIZONA_HP_POLL); + if (ret != 0) { + dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n", + ret); + goto err; + } + + return; + +err: + regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); + + /* Just report headphone */ + ret = extcon_update_state(&info->edev, + 1 << ARIZONA_CABLE_HEADPHONE, + 1 << ARIZONA_CABLE_HEADPHONE); + if (ret != 0) + dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); + + info->hpdet_active = false; +} + static irqreturn_t arizona_micdet(int irq, void *data) { struct arizona_extcon_info *info = data; @@ -187,16 +757,23 @@ static irqreturn_t arizona_micdet(int irq, void *data) /* If we got a high impedence we should have a headset, report it. */ if (info->detecting && (val & 0x400)) { + arizona_identify_headphone(info); + ret = extcon_update_state(&info->edev, - 1 << ARIZONA_CABLE_MICROPHONE | - 1 << ARIZONA_CABLE_HEADPHONE, - 1 << ARIZONA_CABLE_MICROPHONE | - 1 << ARIZONA_CABLE_HEADPHONE); + 1 << ARIZONA_CABLE_MICROPHONE, + 1 << ARIZONA_CABLE_MICROPHONE); if (ret != 0) dev_err(arizona->dev, "Headset report failed: %d\n", ret); + /* Don't need to regulate for button detection */ + ret = regulator_allow_bypass(info->micvdd, false); + if (ret != 0) { + dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n", + ret); + } + info->mic = true; info->detecting = false; goto handled; @@ -209,20 +786,13 @@ static irqreturn_t arizona_micdet(int irq, void *data) * impedence then give up and report headphones. */ if (info->detecting && (val & 0x3f8)) { - info->jack_flips++; - if (info->jack_flips >= info->micd_num_modes) { - dev_dbg(arizona->dev, "Detected headphone\n"); + dev_dbg(arizona->dev, "Detected HP/line\n"); + arizona_identify_headphone(info); + info->detecting = false; - arizona_stop_mic(info); - ret = extcon_set_cable_state_(&info->edev, - ARIZONA_CABLE_HEADPHONE, - true); - if (ret != 0) - dev_err(arizona->dev, - "Headphone report failed: %d\n", - ret); + arizona_stop_mic(info); } else { info->micd_mode++; if (info->micd_mode == info->micd_num_modes) @@ -258,13 +828,7 @@ static irqreturn_t arizona_micdet(int irq, void *data) info->detecting = false; arizona_stop_mic(info); - ret = extcon_set_cable_state_(&info->edev, - ARIZONA_CABLE_HEADPHONE, - true); - if (ret != 0) - dev_err(arizona->dev, - "Headphone report failed: %d\n", - ret); + arizona_identify_headphone(info); } else { dev_warn(arizona->dev, "Button with no mic: %x\n", val); @@ -275,6 +839,7 @@ static irqreturn_t arizona_micdet(int irq, void *data) input_report_key(info->input, arizona_lvl_to_key[i].report, 0); input_sync(info->input); + arizona_extcon_pulse_micbias(info); } handled: @@ -284,17 +849,38 @@ handled: return IRQ_HANDLED; } +static void arizona_hpdet_work(struct work_struct *work) +{ + struct arizona_extcon_info *info = container_of(work, + struct arizona_extcon_info, + hpdet_work.work); + + mutex_lock(&info->lock); + arizona_start_hpdet_acc_id(info); + mutex_unlock(&info->lock); +} + static irqreturn_t arizona_jackdet(int irq, void *data) { struct arizona_extcon_info *info = data; struct arizona *arizona = info->arizona; - unsigned int val; + unsigned int val, present, mask; int ret, i; pm_runtime_get_sync(info->dev); + cancel_delayed_work_sync(&info->hpdet_work); + mutex_lock(&info->lock); + if (arizona->pdata.jd_gpio5) { + mask = ARIZONA_MICD_CLAMP_STS; + present = 0; + } else { + mask = ARIZONA_JD1_STS; + present = ARIZONA_JD1_STS; + } + ret = regmap_read(arizona->regmap, ARIZONA_AOD_IRQ_RAW_STATUS, &val); if (ret != 0) { dev_err(arizona->dev, "Failed to read jackdet status: %d\n", @@ -304,7 +890,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data) return IRQ_NONE; } - if (val & ARIZONA_JD1_STS) { + if ((val & mask) == present) { dev_dbg(arizona->dev, "Detected jack\n"); ret = extcon_set_cable_state_(&info->edev, ARIZONA_CABLE_MECHANICAL, true); @@ -313,12 +899,31 @@ static irqreturn_t arizona_jackdet(int irq, void *data) dev_err(arizona->dev, "Mechanical report failed: %d\n", ret); - arizona_start_mic(info); + if (!arizona->pdata.hpdet_acc_id) { + info->detecting = true; + info->mic = false; + info->jack_flips = 0; + + arizona_start_mic(info); + } else { + schedule_delayed_work(&info->hpdet_work, + msecs_to_jiffies(250)); + } + + regmap_update_bits(arizona->regmap, + ARIZONA_JACK_DETECT_DEBOUNCE, + ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB, 0); } else { dev_dbg(arizona->dev, "Detected jack removal\n"); arizona_stop_mic(info); + info->num_hpdet_res = 0; + for (i = 0; i < ARRAY_SIZE(info->hpdet_res); i++) + info->hpdet_res[i] = 0; + info->mic = false; + info->hpdet_done = false; + for (i = 0; i < ARIZONA_NUM_BUTTONS; i++) input_report_key(info->input, arizona_lvl_to_key[i].report, 0); @@ -328,8 +933,20 @@ static irqreturn_t arizona_jackdet(int irq, void *data) if (ret != 0) dev_err(arizona->dev, "Removal report failed: %d\n", ret); + + regmap_update_bits(arizona->regmap, + ARIZONA_JACK_DETECT_DEBOUNCE, + ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB, + ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB); } + /* Clear trig_sts to make sure DCVDD is not forced up */ + regmap_write(arizona->regmap, ARIZONA_AOD_WKUP_AND_TRIG, + ARIZONA_MICD_CLAMP_FALL_TRIG_STS | + ARIZONA_MICD_CLAMP_RISE_TRIG_STS | + ARIZONA_JD1_FALL_TRIG_STS | + ARIZONA_JD1_RISE_TRIG_STS); + mutex_unlock(&info->lock); pm_runtime_mark_last_busy(info->dev); @@ -343,8 +960,12 @@ static int arizona_extcon_probe(struct platform_device *pdev) struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); struct arizona_pdata *pdata; struct arizona_extcon_info *info; + int jack_irq_fall, jack_irq_rise; int ret, mode, i; + if (!arizona->dapm || !arizona->dapm->card) + return -EPROBE_DEFER; + pdata = dev_get_platdata(arizona->dev); info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); @@ -364,7 +985,7 @@ static int arizona_extcon_probe(struct platform_device *pdev) mutex_init(&info->lock); info->arizona = arizona; info->dev = &pdev->dev; - info->detecting = true; + INIT_DELAYED_WORK(&info->hpdet_work, arizona_hpdet_work); platform_set_drvdata(pdev, info); switch (arizona->type) { @@ -374,6 +995,8 @@ static int arizona_extcon_probe(struct platform_device *pdev) info->micd_reva = true; break; default: + info->micd_clamp = true; + info->hpdet_ip = 1; break; } break; @@ -416,9 +1039,64 @@ static int arizona_extcon_probe(struct platform_device *pdev) } } + if (arizona->pdata.hpdet_id_gpio > 0) { + ret = devm_gpio_request_one(&pdev->dev, + arizona->pdata.hpdet_id_gpio, + GPIOF_OUT_INIT_LOW, + "HPDET"); + if (ret != 0) { + dev_err(arizona->dev, "Failed to request GPIO%d: %d\n", + arizona->pdata.hpdet_id_gpio, ret); + goto err_register; + } + } + + if (arizona->pdata.micd_bias_start_time) + regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, + ARIZONA_MICD_BIAS_STARTTIME_MASK, + arizona->pdata.micd_bias_start_time + << ARIZONA_MICD_BIAS_STARTTIME_SHIFT); + + if (arizona->pdata.micd_rate) + regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, + ARIZONA_MICD_RATE_MASK, + arizona->pdata.micd_rate + << ARIZONA_MICD_RATE_SHIFT); + + if (arizona->pdata.micd_dbtime) + regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, + ARIZONA_MICD_DBTIME_MASK, + arizona->pdata.micd_dbtime + << ARIZONA_MICD_DBTIME_SHIFT); + + /* + * If we have a clamp use it, activating in conjunction with + * GPIO5 if that is connected for jack detect operation. + */ + if (info->micd_clamp) { + if (arizona->pdata.jd_gpio5) { + /* Put the GPIO into input mode */ + regmap_write(arizona->regmap, ARIZONA_GPIO5_CTRL, + 0xc101); + + regmap_update_bits(arizona->regmap, + ARIZONA_MICD_CLAMP_CONTROL, + ARIZONA_MICD_CLAMP_MODE_MASK, 0x9); + } else { + regmap_update_bits(arizona->regmap, + ARIZONA_MICD_CLAMP_CONTROL, + ARIZONA_MICD_CLAMP_MODE_MASK, 0x4); + } + + regmap_update_bits(arizona->regmap, + ARIZONA_JACK_DETECT_DEBOUNCE, + ARIZONA_MICD_CLAMP_DB, + ARIZONA_MICD_CLAMP_DB); + } + arizona_extcon_set_mode(info, 0); - info->input = input_allocate_device(); + info->input = devm_input_allocate_device(&pdev->dev); if (!info->input) { dev_err(arizona->dev, "Can't allocate input dev\n"); ret = -ENOMEM; @@ -436,7 +1114,15 @@ static int arizona_extcon_probe(struct platform_device *pdev) pm_runtime_idle(&pdev->dev); pm_runtime_get_sync(&pdev->dev); - ret = arizona_request_irq(arizona, ARIZONA_IRQ_JD_RISE, + if (arizona->pdata.jd_gpio5) { + jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE; + jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL; + } else { + jack_irq_rise = ARIZONA_IRQ_JD_RISE; + jack_irq_fall = ARIZONA_IRQ_JD_FALL; + } + + ret = arizona_request_irq(arizona, jack_irq_rise, "JACKDET rise", arizona_jackdet, info); if (ret != 0) { dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n", @@ -444,21 +1130,21 @@ static int arizona_extcon_probe(struct platform_device *pdev) goto err_input; } - ret = arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_RISE, 1); + ret = arizona_set_irq_wake(arizona, jack_irq_rise, 1); if (ret != 0) { dev_err(&pdev->dev, "Failed to set JD rise IRQ wake: %d\n", ret); goto err_rise; } - ret = arizona_request_irq(arizona, ARIZONA_IRQ_JD_FALL, + ret = arizona_request_irq(arizona, jack_irq_fall, "JACKDET fall", arizona_jackdet, info); if (ret != 0) { dev_err(&pdev->dev, "Failed to get JD fall IRQ: %d\n", ret); goto err_rise_wake; } - ret = arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_FALL, 1); + ret = arizona_set_irq_wake(arizona, jack_irq_fall, 1); if (ret != 0) { dev_err(&pdev->dev, "Failed to set JD fall IRQ wake: %d\n", ret); @@ -472,11 +1158,12 @@ static int arizona_extcon_probe(struct platform_device *pdev) goto err_fall_wake; } - regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, - ARIZONA_MICD_BIAS_STARTTIME_MASK | - ARIZONA_MICD_RATE_MASK, - 7 << ARIZONA_MICD_BIAS_STARTTIME_SHIFT | - 8 << ARIZONA_MICD_RATE_SHIFT); + ret = arizona_request_irq(arizona, ARIZONA_IRQ_HPDET, + "HPDET", arizona_hpdet_irq, info); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to get HPDET IRQ: %d\n", ret); + goto err_micdet; + } arizona_clk32k_enable(arizona); regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_DEBOUNCE, @@ -494,23 +1181,24 @@ static int arizona_extcon_probe(struct platform_device *pdev) ret = input_register_device(info->input); if (ret) { dev_err(&pdev->dev, "Can't register input device: %d\n", ret); - goto err_micdet; + goto err_hpdet; } return 0; +err_hpdet: + arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info); err_micdet: arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info); err_fall_wake: - arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_FALL, 0); + arizona_set_irq_wake(arizona, jack_irq_fall, 0); err_fall: - arizona_free_irq(arizona, ARIZONA_IRQ_JD_FALL, info); + arizona_free_irq(arizona, jack_irq_fall, info); err_rise_wake: - arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_RISE, 0); + arizona_set_irq_wake(arizona, jack_irq_rise, 0); err_rise: - arizona_free_irq(arizona, ARIZONA_IRQ_JD_RISE, info); + arizona_free_irq(arizona, jack_irq_rise, info); err_input: - input_free_device(info->input); err_register: pm_runtime_disable(&pdev->dev); extcon_dev_unregister(&info->edev); @@ -522,18 +1210,32 @@ static int arizona_extcon_remove(struct platform_device *pdev) { struct arizona_extcon_info *info = platform_get_drvdata(pdev); struct arizona *arizona = info->arizona; + int jack_irq_rise, jack_irq_fall; pm_runtime_disable(&pdev->dev); - arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_RISE, 0); - arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_FALL, 0); + regmap_update_bits(arizona->regmap, + ARIZONA_MICD_CLAMP_CONTROL, + ARIZONA_MICD_CLAMP_MODE_MASK, 0); + + if (arizona->pdata.jd_gpio5) { + jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE; + jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL; + } else { + jack_irq_rise = ARIZONA_IRQ_JD_RISE; + jack_irq_fall = ARIZONA_IRQ_JD_FALL; + } + + arizona_set_irq_wake(arizona, jack_irq_rise, 0); + arizona_set_irq_wake(arizona, jack_irq_fall, 0); + arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info); arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info); - arizona_free_irq(arizona, ARIZONA_IRQ_JD_RISE, info); - arizona_free_irq(arizona, ARIZONA_IRQ_JD_FALL, info); + arizona_free_irq(arizona, jack_irq_rise, info); + arizona_free_irq(arizona, jack_irq_fall, info); + cancel_delayed_work_sync(&info->hpdet_work); regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, ARIZONA_JD1_ENA, 0); arizona_clk32k_disable(arizona); - input_unregister_device(info->input); extcon_dev_unregister(&info->edev); return 0; diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c index 1b14bfcdc176..02bec32adde4 100644 --- a/drivers/extcon/extcon-gpio.c +++ b/drivers/extcon/extcon-gpio.c @@ -29,7 +29,7 @@ #include <linux/workqueue.h> #include <linux/gpio.h> #include <linux/extcon.h> -#include <linux/extcon/extcon_gpio.h> +#include <linux/extcon/extcon-gpio.h> struct gpio_extcon_data { struct extcon_dev edev; diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c index 8c17b65eb74d..b70e3815c459 100644 --- a/drivers/extcon/extcon-max77693.c +++ b/drivers/extcon/extcon-max77693.c @@ -19,6 +19,7 @@ #include <linux/module.h> #include <linux/i2c.h> #include <linux/slab.h> +#include <linux/input.h> #include <linux/interrupt.h> #include <linux/err.h> #include <linux/platform_device.h> @@ -29,92 +30,7 @@ #include <linux/irqdomain.h> #define DEV_NAME "max77693-muic" - -/* MAX77693 MUIC - STATUS1~3 Register */ -#define STATUS1_ADC_SHIFT (0) -#define STATUS1_ADCLOW_SHIFT (5) -#define STATUS1_ADCERR_SHIFT (6) -#define STATUS1_ADC1K_SHIFT (7) -#define STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT) -#define STATUS1_ADCLOW_MASK (0x1 << STATUS1_ADCLOW_SHIFT) -#define STATUS1_ADCERR_MASK (0x1 << STATUS1_ADCERR_SHIFT) -#define STATUS1_ADC1K_MASK (0x1 << STATUS1_ADC1K_SHIFT) - -#define STATUS2_CHGTYP_SHIFT (0) -#define STATUS2_CHGDETRUN_SHIFT (3) -#define STATUS2_DCDTMR_SHIFT (4) -#define STATUS2_DXOVP_SHIFT (5) -#define STATUS2_VBVOLT_SHIFT (6) -#define STATUS2_VIDRM_SHIFT (7) -#define STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT) -#define STATUS2_CHGDETRUN_MASK (0x1 << STATUS2_CHGDETRUN_SHIFT) -#define STATUS2_DCDTMR_MASK (0x1 << STATUS2_DCDTMR_SHIFT) -#define STATUS2_DXOVP_MASK (0x1 << STATUS2_DXOVP_SHIFT) -#define STATUS2_VBVOLT_MASK (0x1 << STATUS2_VBVOLT_SHIFT) -#define STATUS2_VIDRM_MASK (0x1 << STATUS2_VIDRM_SHIFT) - -#define STATUS3_OVP_SHIFT (2) -#define STATUS3_OVP_MASK (0x1 << STATUS3_OVP_SHIFT) - -/* MAX77693 CDETCTRL1~2 register */ -#define CDETCTRL1_CHGDETEN_SHIFT (0) -#define CDETCTRL1_CHGTYPMAN_SHIFT (1) -#define CDETCTRL1_DCDEN_SHIFT (2) -#define CDETCTRL1_DCD2SCT_SHIFT (3) -#define CDETCTRL1_CDDELAY_SHIFT (4) -#define CDETCTRL1_DCDCPL_SHIFT (5) -#define CDETCTRL1_CDPDET_SHIFT (7) -#define CDETCTRL1_CHGDETEN_MASK (0x1 << CDETCTRL1_CHGDETEN_SHIFT) -#define CDETCTRL1_CHGTYPMAN_MASK (0x1 << CDETCTRL1_CHGTYPMAN_SHIFT) -#define CDETCTRL1_DCDEN_MASK (0x1 << CDETCTRL1_DCDEN_SHIFT) -#define CDETCTRL1_DCD2SCT_MASK (0x1 << CDETCTRL1_DCD2SCT_SHIFT) -#define CDETCTRL1_CDDELAY_MASK (0x1 << CDETCTRL1_CDDELAY_SHIFT) -#define CDETCTRL1_DCDCPL_MASK (0x1 << CDETCTRL1_DCDCPL_SHIFT) -#define CDETCTRL1_CDPDET_MASK (0x1 << CDETCTRL1_CDPDET_SHIFT) - -#define CDETCTRL2_VIDRMEN_SHIFT (1) -#define CDETCTRL2_DXOVPEN_SHIFT (3) -#define CDETCTRL2_VIDRMEN_MASK (0x1 << CDETCTRL2_VIDRMEN_SHIFT) -#define CDETCTRL2_DXOVPEN_MASK (0x1 << CDETCTRL2_DXOVPEN_SHIFT) - -/* MAX77693 MUIC - CONTROL1~3 register */ -#define COMN1SW_SHIFT (0) -#define COMP2SW_SHIFT (3) -#define COMN1SW_MASK (0x7 << COMN1SW_SHIFT) -#define COMP2SW_MASK (0x7 << COMP2SW_SHIFT) -#define COMP_SW_MASK (COMP2SW_MASK | COMN1SW_MASK) -#define CONTROL1_SW_USB ((1 << COMP2SW_SHIFT) \ - | (1 << COMN1SW_SHIFT)) -#define CONTROL1_SW_AUDIO ((2 << COMP2SW_SHIFT) \ - | (2 << COMN1SW_SHIFT)) -#define CONTROL1_SW_UART ((3 << COMP2SW_SHIFT) \ - | (3 << COMN1SW_SHIFT)) -#define CONTROL1_SW_OPEN ((0 << COMP2SW_SHIFT) \ - | (0 << COMN1SW_SHIFT)) - -#define CONTROL2_LOWPWR_SHIFT (0) -#define CONTROL2_ADCEN_SHIFT (1) -#define CONTROL2_CPEN_SHIFT (2) -#define CONTROL2_SFOUTASRT_SHIFT (3) -#define CONTROL2_SFOUTORD_SHIFT (4) -#define CONTROL2_ACCDET_SHIFT (5) -#define CONTROL2_USBCPINT_SHIFT (6) -#define CONTROL2_RCPS_SHIFT (7) -#define CONTROL2_LOWPWR_MASK (0x1 << CONTROL2_LOWPWR_SHIFT) -#define CONTROL2_ADCEN_MASK (0x1 << CONTROL2_ADCEN_SHIFT) -#define CONTROL2_CPEN_MASK (0x1 << CONTROL2_CPEN_SHIFT) -#define CONTROL2_SFOUTASRT_MASK (0x1 << CONTROL2_SFOUTASRT_SHIFT) -#define CONTROL2_SFOUTORD_MASK (0x1 << CONTROL2_SFOUTORD_SHIFT) -#define CONTROL2_ACCDET_MASK (0x1 << CONTROL2_ACCDET_SHIFT) -#define CONTROL2_USBCPINT_MASK (0x1 << CONTROL2_USBCPINT_SHIFT) -#define CONTROL2_RCPS_MASK (0x1 << CONTROL2_RCPS_SHIFT) - -#define CONTROL3_JIGSET_SHIFT (0) -#define CONTROL3_BTLDSET_SHIFT (2) -#define CONTROL3_ADCDBSET_SHIFT (4) -#define CONTROL3_JIGSET_MASK (0x3 << CONTROL3_JIGSET_SHIFT) -#define CONTROL3_BTLDSET_MASK (0x3 << CONTROL3_BTLDSET_SHIFT) -#define CONTROL3_ADCDBSET_MASK (0x3 << CONTROL3_ADCDBSET_SHIFT) +#define DELAY_MS_DEFAULT 20000 /* unit: millisecond */ enum max77693_muic_adc_debounce_time { ADC_DEBOUNCE_TIME_5MS = 0, @@ -127,14 +43,40 @@ struct max77693_muic_info { struct device *dev; struct max77693_dev *max77693; struct extcon_dev *edev; - int prev_adc; - int prev_adc_gnd; + int prev_cable_type; + int prev_cable_type_gnd; int prev_chg_type; + int prev_button_type; u8 status[2]; int irq; struct work_struct irq_work; struct mutex mutex; + + /* + * Use delayed workqueue to detect cable state and then + * notify cable state to notifiee/platform through uevent. + * After completing the booting of platform, the extcon provider + * driver should notify cable state to upper layer. + */ + struct delayed_work wq_detcable; + + /* Button of dock device */ + struct input_dev *dock; + + /* + * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB + * h/w path of COMP2/COMN1 on CONTROL1 register. + */ + int path_usb; + int path_uart; +}; + +enum max77693_muic_cable_group { + MAX77693_CABLE_GROUP_ADC = 0, + MAX77693_CABLE_GROUP_ADC_GND, + MAX77693_CABLE_GROUP_CHG, + MAX77693_CABLE_GROUP_VBVOLT, }; enum max77693_muic_charger_type { @@ -215,27 +157,59 @@ enum max77693_muic_acc_type { /* The below accessories have same ADC value so ADCLow and ADC1K bit is used to separate specific accessory */ - MAX77693_MUIC_GND_USB_OTG = 0x100, /* ADC:0x0, ADCLow:0, ADC1K:0 */ - MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* ADC:0x0, ADCLow:1, ADC1K:0 */ - MAX77693_MUIC_GND_MHL_CABLE = 0x103, /* ADC:0x0, ADCLow:1, ADC1K:1 */ + MAX77693_MUIC_GND_USB_OTG = 0x100, /* ADC:0x0, VBVolot:0, ADCLow:0, ADC1K:0 */ + MAX77693_MUIC_GND_USB_OTG_VB = 0x104, /* ADC:0x0, VBVolot:1, ADCLow:0, ADC1K:0 */ + MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* ADC:0x0, VBVolot:0, ADCLow:1, ADC1K:0 */ + MAX77693_MUIC_GND_MHL = 0x103, /* ADC:0x0, VBVolot:0, ADCLow:1, ADC1K:1 */ + MAX77693_MUIC_GND_MHL_VB = 0x107, /* ADC:0x0, VBVolot:1, ADCLow:1, ADC1K:1 */ }; /* MAX77693 MUIC device support below list of accessories(external connector) */ -const char *max77693_extcon_cable[] = { - [0] = "USB", - [1] = "USB-Host", - [2] = "TA", - [3] = "Fast-charger", - [4] = "Slow-charger", - [5] = "Charge-downstream", - [6] = "MHL", - [7] = "Audio-video-load", - [8] = "Audio-video-noload", - [9] = "JIG", +enum { + EXTCON_CABLE_USB = 0, + EXTCON_CABLE_USB_HOST, + EXTCON_CABLE_TA, + EXTCON_CABLE_FAST_CHARGER, + EXTCON_CABLE_SLOW_CHARGER, + EXTCON_CABLE_CHARGE_DOWNSTREAM, + EXTCON_CABLE_MHL, + EXTCON_CABLE_MHL_TA, + EXTCON_CABLE_JIG_USB_ON, + EXTCON_CABLE_JIG_USB_OFF, + EXTCON_CABLE_JIG_UART_OFF, + EXTCON_CABLE_JIG_UART_ON, + EXTCON_CABLE_DOCK_SMART, + EXTCON_CABLE_DOCK_DESK, + EXTCON_CABLE_DOCK_AUDIO, + + _EXTCON_CABLE_NUM, +}; + +static const char *max77693_extcon_cable[] = { + [EXTCON_CABLE_USB] = "USB", + [EXTCON_CABLE_USB_HOST] = "USB-Host", + [EXTCON_CABLE_TA] = "TA", + [EXTCON_CABLE_FAST_CHARGER] = "Fast-charger", + [EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger", + [EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream", + [EXTCON_CABLE_MHL] = "MHL", + [EXTCON_CABLE_MHL_TA] = "MHL_TA", + [EXTCON_CABLE_JIG_USB_ON] = "JIG-USB-ON", + [EXTCON_CABLE_JIG_USB_OFF] = "JIG-USB-OFF", + [EXTCON_CABLE_JIG_UART_OFF] = "JIG-UART-OFF", + [EXTCON_CABLE_JIG_UART_ON] = "Dock-Car", + [EXTCON_CABLE_DOCK_SMART] = "Dock-Smart", + [EXTCON_CABLE_DOCK_DESK] = "Dock-Desk", + [EXTCON_CABLE_DOCK_AUDIO] = "Dock-Audio", NULL, }; +/* + * max77693_muic_set_debounce_time - Set the debounce time of ADC + * @info: the instance including private data of max77693 MUIC + * @time: the debounce time of ADC + */ static int max77693_muic_set_debounce_time(struct max77693_muic_info *info, enum max77693_muic_adc_debounce_time time) { @@ -250,18 +224,29 @@ static int max77693_muic_set_debounce_time(struct max77693_muic_info *info, MAX77693_MUIC_REG_CTRL3, time << CONTROL3_ADCDBSET_SHIFT, CONTROL3_ADCDBSET_MASK); - if (ret) + if (ret) { dev_err(info->dev, "failed to set ADC debounce time\n"); + return -EAGAIN; + } break; default: dev_err(info->dev, "invalid ADC debounce time\n"); - ret = -EINVAL; - break; + return -EINVAL; } - return ret; + return 0; }; +/* + * max77693_muic_set_path - Set hardware line according to attached cable + * @info: the instance including private data of max77693 MUIC + * @value: the path according to attached cable + * @attached: the state of cable (true:attached, false:detached) + * + * The max77693 MUIC device share outside H/W line among a varity of cables + * so, this function set internal path of H/W line according to the type of + * attached cable. + */ static int max77693_muic_set_path(struct max77693_muic_info *info, u8 val, bool attached) { @@ -277,7 +262,7 @@ static int max77693_muic_set_path(struct max77693_muic_info *info, MAX77693_MUIC_REG_CTRL1, ctrl1, COMP_SW_MASK); if (ret < 0) { dev_err(info->dev, "failed to update MUIC register\n"); - goto out; + return -EAGAIN; } if (attached) @@ -290,141 +275,457 @@ static int max77693_muic_set_path(struct max77693_muic_info *info, CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK); if (ret < 0) { dev_err(info->dev, "failed to update MUIC register\n"); - goto out; + return -EAGAIN; } dev_info(info->dev, "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n", ctrl1, ctrl2, attached ? "attached" : "detached"); -out: - return ret; + + return 0; } -static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info, - bool attached) +/* + * max77693_muic_get_cable_type - Return cable type and check cable state + * @info: the instance including private data of max77693 MUIC + * @group: the path according to attached cable + * @attached: store cable state and return + * + * This function check the cable state either attached or detached, + * and then divide precise type of cable according to cable group. + * - MAX77693_CABLE_GROUP_ADC + * - MAX77693_CABLE_GROUP_ADC_GND + * - MAX77693_CABLE_GROUP_CHG + * - MAX77693_CABLE_GROUP_VBVOLT + */ +static int max77693_muic_get_cable_type(struct max77693_muic_info *info, + enum max77693_muic_cable_group group, bool *attached) { - int ret = 0; - int type; - int adc, adc1k, adclow; + int cable_type = 0; + int adc; + int adc1k; + int adclow; + int vbvolt; + int chg_type; + + switch (group) { + case MAX77693_CABLE_GROUP_ADC: + /* + * Read ADC value to check cable type and decide cable state + * according to cable type + */ + adc = info->status[0] & STATUS1_ADC_MASK; + adc >>= STATUS1_ADC_SHIFT; + + /* + * Check current cable state/cable type and store cable type + * (info->prev_cable_type) for handling cable when cable is + * detached. + */ + if (adc == MAX77693_MUIC_ADC_OPEN) { + *attached = false; + + cable_type = info->prev_cable_type; + info->prev_cable_type = MAX77693_MUIC_ADC_OPEN; + } else { + *attached = true; + + cable_type = info->prev_cable_type = adc; + } + break; + case MAX77693_CABLE_GROUP_ADC_GND: + /* + * Read ADC value to check cable type and decide cable state + * according to cable type + */ + adc = info->status[0] & STATUS1_ADC_MASK; + adc >>= STATUS1_ADC_SHIFT; + + /* + * Check current cable state/cable type and store cable type + * (info->prev_cable_type/_gnd) for handling cable when cable + * is detached. + */ + if (adc == MAX77693_MUIC_ADC_OPEN) { + *attached = false; + + cable_type = info->prev_cable_type_gnd; + info->prev_cable_type_gnd = MAX77693_MUIC_ADC_OPEN; + } else { + *attached = true; + + adclow = info->status[0] & STATUS1_ADCLOW_MASK; + adclow >>= STATUS1_ADCLOW_SHIFT; + adc1k = info->status[0] & STATUS1_ADC1K_MASK; + adc1k >>= STATUS1_ADC1K_SHIFT; + + vbvolt = info->status[1] & STATUS2_VBVOLT_MASK; + vbvolt >>= STATUS2_VBVOLT_SHIFT; + + /** + * [0x1][VBVolt][ADCLow][ADC1K] + * [0x1 0 0 0 ] : USB_OTG + * [0x1 1 0 0 ] : USB_OTG_VB + * [0x1 0 1 0 ] : Audio Video Cable with load + * [0x1 0 1 1 ] : MHL without charging connector + * [0x1 1 1 1 ] : MHL with charging connector + */ + cable_type = ((0x1 << 8) + | (vbvolt << 2) + | (adclow << 1) + | adc1k); + + info->prev_cable_type = adc; + info->prev_cable_type_gnd = cable_type; + } - if (attached) { + break; + case MAX77693_CABLE_GROUP_CHG: + /* + * Read charger type to check cable type and decide cable state + * according to type of charger cable. + */ + chg_type = info->status[1] & STATUS2_CHGTYP_MASK; + chg_type >>= STATUS2_CHGTYP_SHIFT; + + if (chg_type == MAX77693_CHARGER_TYPE_NONE) { + *attached = false; + + cable_type = info->prev_chg_type; + info->prev_chg_type = MAX77693_CHARGER_TYPE_NONE; + } else { + *attached = true; + + /* + * Check current cable state/cable type and store cable + * type(info->prev_chg_type) for handling cable when + * charger cable is detached. + */ + cable_type = info->prev_chg_type = chg_type; + } + + break; + case MAX77693_CABLE_GROUP_VBVOLT: + /* + * Read ADC value to check cable type and decide cable state + * according to cable type + */ adc = info->status[0] & STATUS1_ADC_MASK; - adclow = info->status[0] & STATUS1_ADCLOW_MASK; - adclow >>= STATUS1_ADCLOW_SHIFT; - adc1k = info->status[0] & STATUS1_ADC1K_MASK; - adc1k >>= STATUS1_ADC1K_SHIFT; - - /** - * [0x1][ADCLow][ADC1K] - * [0x1 0 0 ] : USB_OTG - * [0x1 1 0 ] : Audio Video Cable with load - * [0x1 1 1 ] : MHL + adc >>= STATUS1_ADC_SHIFT; + chg_type = info->status[1] & STATUS2_CHGTYP_MASK; + chg_type >>= STATUS2_CHGTYP_SHIFT; + + if (adc == MAX77693_MUIC_ADC_OPEN + && chg_type == MAX77693_CHARGER_TYPE_NONE) + *attached = false; + else + *attached = true; + + /* + * Read vbvolt field, if vbvolt is 1, + * this cable is used for charging. + */ + vbvolt = info->status[1] & STATUS2_VBVOLT_MASK; + vbvolt >>= STATUS2_VBVOLT_SHIFT; + + cable_type = vbvolt; + break; + default: + dev_err(info->dev, "Unknown cable group (%d)\n", group); + cable_type = -EINVAL; + break; + } + + return cable_type; +} + +static int max77693_muic_dock_handler(struct max77693_muic_info *info, + int cable_type, bool attached) +{ + int ret = 0; + int vbvolt; + bool cable_attached; + char dock_name[CABLE_NAME_MAX]; + + dev_info(info->dev, + "external connector is %s (adc:0x%02x)\n", + attached ? "attached" : "detached", cable_type); + + switch (cable_type) { + case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */ + /* + * Check power cable whether attached or detached state. + * The Dock-Smart device need surely external power supply. + * If power cable(USB/TA) isn't connected to Dock device, + * user can't use Dock-Smart for desktop mode. + */ + vbvolt = max77693_muic_get_cable_type(info, + MAX77693_CABLE_GROUP_VBVOLT, &cable_attached); + if (attached && !vbvolt) { + dev_warn(info->dev, + "Cannot detect external power supply\n"); + return 0; + } + + /* + * Notify Dock-Smart/MHL state. + * - Dock-Smart device include three type of cable which + * are HDMI, USB for mouse/keyboard and micro-usb port + * for USB/TA cable. Dock-Smart device need always exteranl + * power supply(USB/TA cable through micro-usb cable). Dock- + * Smart device support screen output of target to separate + * monitor and mouse/keyboard for desktop mode. + * + * Features of 'USB/TA cable with Dock-Smart device' + * - Support MHL + * - Support external output feature of audio + * - Support charging through micro-usb port without data + * connection if TA cable is connected to target. + * - Support charging and data connection through micro-usb port + * if USB cable is connected between target and host + * device. + * - Support OTG device (Mouse/Keyboard) */ - type = ((0x1 << 8) | (adclow << 1) | adc1k); + ret = max77693_muic_set_path(info, info->path_usb, attached); + if (ret < 0) + return ret; + + extcon_set_cable_state(info->edev, "Dock-Smart", attached); + extcon_set_cable_state(info->edev, "MHL", attached); + goto out; + case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON: /* Dock-Car */ + strcpy(dock_name, "Dock-Car"); + break; + case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: /* Dock-Desk */ + strcpy(dock_name, "Dock-Desk"); + break; + case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */ + strcpy(dock_name, "Dock-Audio"); + if (!attached) + extcon_set_cable_state(info->edev, "USB", false); + break; + default: + dev_err(info->dev, "failed to detect %s dock device\n", + attached ? "attached" : "detached"); + return -EINVAL; + } + + /* Dock-Car/Desk/Audio, PATH:AUDIO */ + ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached); + if (ret < 0) + return ret; + extcon_set_cable_state(info->edev, dock_name, attached); + +out: + return 0; +} + +static int max77693_muic_dock_button_handler(struct max77693_muic_info *info, + int button_type, bool attached) +{ + struct input_dev *dock = info->dock; + unsigned int code; + + switch (button_type) { + case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON-1 + ... MAX77693_MUIC_ADC_REMOTE_S3_BUTTON+1: + /* DOCK_KEY_PREV */ + code = KEY_PREVIOUSSONG; + break; + case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON-1 + ... MAX77693_MUIC_ADC_REMOTE_S7_BUTTON+1: + /* DOCK_KEY_NEXT */ + code = KEY_NEXTSONG; + break; + case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON: + /* DOCK_VOL_DOWN */ + code = KEY_VOLUMEDOWN; + break; + case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON: + /* DOCK_VOL_UP */ + code = KEY_VOLUMEUP; + break; + case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON-1 + ... MAX77693_MUIC_ADC_REMOTE_S12_BUTTON+1: + /* DOCK_KEY_PLAY_PAUSE */ + code = KEY_PLAYPAUSE; + break; + default: + dev_err(info->dev, + "failed to detect %s key (adc:0x%x)\n", + attached ? "pressed" : "released", button_type); + return -EINVAL; + } + + input_event(dock, EV_KEY, code, attached); + input_sync(dock); + + return 0; +} - /* Store previous ADC value to handle accessory - when accessory will be detached */ - info->prev_adc = adc; - info->prev_adc_gnd = type; - } else - type = info->prev_adc_gnd; +static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info) +{ + int cable_type_gnd; + int ret = 0; + bool attached; - switch (type) { + cable_type_gnd = max77693_muic_get_cable_type(info, + MAX77693_CABLE_GROUP_ADC_GND, &attached); + + switch (cable_type_gnd) { case MAX77693_MUIC_GND_USB_OTG: - /* USB_OTG */ + case MAX77693_MUIC_GND_USB_OTG_VB: + /* USB_OTG, PATH: AP_USB */ ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached); if (ret < 0) - goto out; + return ret; extcon_set_cable_state(info->edev, "USB-Host", attached); break; case MAX77693_MUIC_GND_AV_CABLE_LOAD: - /* Audio Video Cable with load */ + /* Audio Video Cable with load, PATH:AUDIO */ ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached); if (ret < 0) - goto out; + return ret; extcon_set_cable_state(info->edev, "Audio-video-load", attached); break; - case MAX77693_MUIC_GND_MHL_CABLE: - /* MHL */ + case MAX77693_MUIC_GND_MHL: + case MAX77693_MUIC_GND_MHL_VB: + /* MHL or MHL with USB/TA cable */ extcon_set_cable_state(info->edev, "MHL", attached); break; default: - dev_err(info->dev, "failed to detect %s accessory\n", + dev_err(info->dev, "failed to detect %s cable of gnd type\n", attached ? "attached" : "detached"); - dev_err(info->dev, "- adc:0x%x, adclow:0x%x, adc1k:0x%x\n", - adc, adclow, adc1k); - ret = -EINVAL; + return -EINVAL; + } + + return 0; +} + +static int max77693_muic_jig_handler(struct max77693_muic_info *info, + int cable_type, bool attached) +{ + char cable_name[32]; + int ret = 0; + u8 path = CONTROL1_SW_OPEN; + + dev_info(info->dev, + "external connector is %s (adc:0x%02x)\n", + attached ? "attached" : "detached", cable_type); + + switch (cable_type) { + case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF: /* ADC_JIG_USB_OFF */ + /* PATH:AP_USB */ + strcpy(cable_name, "JIG-USB-OFF"); + path = CONTROL1_SW_USB; + break; + case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON: /* ADC_JIG_USB_ON */ + /* PATH:AP_USB */ + strcpy(cable_name, "JIG-USB-ON"); + path = CONTROL1_SW_USB; break; + case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF: /* ADC_JIG_UART_OFF */ + /* PATH:AP_UART */ + strcpy(cable_name, "JIG-UART-OFF"); + path = CONTROL1_SW_UART; + break; + default: + dev_err(info->dev, "failed to detect %s jig cable\n", + attached ? "attached" : "detached"); + return -EINVAL; } -out: - return ret; + ret = max77693_muic_set_path(info, path, attached); + if (ret < 0) + return ret; + + extcon_set_cable_state(info->edev, cable_name, attached); + + return 0; } -static int max77693_muic_adc_handler(struct max77693_muic_info *info, - int curr_adc, bool attached) +static int max77693_muic_adc_handler(struct max77693_muic_info *info) { + int cable_type; + int button_type; + bool attached; int ret = 0; - int adc; - if (attached) { - /* Store ADC value to handle accessory - when accessory will be detached */ - info->prev_adc = curr_adc; - adc = curr_adc; - } else - adc = info->prev_adc; + /* Check accessory state which is either detached or attached */ + cable_type = max77693_muic_get_cable_type(info, + MAX77693_CABLE_GROUP_ADC, &attached); dev_info(info->dev, "external connector is %s (adc:0x%02x, prev_adc:0x%x)\n", - attached ? "attached" : "detached", curr_adc, info->prev_adc); + attached ? "attached" : "detached", cable_type, + info->prev_cable_type); - switch (adc) { + switch (cable_type) { case MAX77693_MUIC_ADC_GROUND: /* USB_OTG/MHL/Audio */ - max77693_muic_adc_ground_handler(info, attached); + max77693_muic_adc_ground_handler(info); break; case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF: case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON: - /* USB */ - ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached); - if (ret < 0) - goto out; - extcon_set_cable_state(info->edev, "USB", attached); - break; case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF: - case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON: /* JIG */ - ret = max77693_muic_set_path(info, CONTROL1_SW_UART, attached); + ret = max77693_muic_jig_handler(info, cable_type, attached); if (ret < 0) - goto out; - extcon_set_cable_state(info->edev, "JIG", attached); + return ret; break; - case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: - /* Audio Video cable with no-load */ - ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached); + case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */ + case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON: /* Dock-Car */ + case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: /* Dock-Desk */ + case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */ + /* + * DOCK device + * + * The MAX77693 MUIC device can detect total 34 cable type + * except of charger cable and MUIC device didn't define + * specfic role of cable in the range of from 0x01 to 0x12 + * of ADC value. So, can use/define cable with no role according + * to schema of hardware board. + */ + ret = max77693_muic_dock_handler(info, cable_type, attached); if (ret < 0) - goto out; - extcon_set_cable_state(info->edev, - "Audio-video-noload", attached); + return ret; + break; + case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON: /* DOCK_KEY_PREV */ + case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON: /* DOCK_KEY_NEXT */ + case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON: /* DOCK_VOL_DOWN */ + case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON: /* DOCK_VOL_UP */ + case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON: /* DOCK_KEY_PLAY_PAUSE */ + /* + * Button of DOCK device + * - the Prev/Next/Volume Up/Volume Down/Play-Pause button + * + * The MAX77693 MUIC device can detect total 34 cable type + * except of charger cable and MUIC device didn't define + * specfic role of cable in the range of from 0x01 to 0x12 + * of ADC value. So, can use/define cable with no role according + * to schema of hardware board. + */ + if (attached) + button_type = info->prev_button_type = cable_type; + else + button_type = info->prev_button_type; + + ret = max77693_muic_dock_button_handler(info, button_type, + attached); + if (ret < 0) + return ret; break; case MAX77693_MUIC_ADC_SEND_END_BUTTON: case MAX77693_MUIC_ADC_REMOTE_S1_BUTTON: case MAX77693_MUIC_ADC_REMOTE_S2_BUTTON: - case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON: case MAX77693_MUIC_ADC_REMOTE_S4_BUTTON: case MAX77693_MUIC_ADC_REMOTE_S5_BUTTON: case MAX77693_MUIC_ADC_REMOTE_S6_BUTTON: - case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON: case MAX77693_MUIC_ADC_REMOTE_S8_BUTTON: - case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON: - case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON: case MAX77693_MUIC_ADC_REMOTE_S11_BUTTON: - case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON: case MAX77693_MUIC_ADC_RESERVED_ACC_1: case MAX77693_MUIC_ADC_RESERVED_ACC_2: - case MAX77693_MUIC_ADC_RESERVED_ACC_3: case MAX77693_MUIC_ADC_RESERVED_ACC_4: case MAX77693_MUIC_ADC_RESERVED_ACC_5: case MAX77693_MUIC_ADC_CEA936_AUDIO: @@ -432,60 +733,164 @@ static int max77693_muic_adc_handler(struct max77693_muic_info *info, case MAX77693_MUIC_ADC_TTY_CONVERTER: case MAX77693_MUIC_ADC_UART_CABLE: case MAX77693_MUIC_ADC_CEA936A_TYPE1_CHG: - case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: case MAX77693_MUIC_ADC_CEA936A_TYPE2_CHG: - /* This accessory isn't used in general case if it is specially - needed to detect additional accessory, should implement - proper operation when this accessory is attached/detached. */ + /* + * This accessory isn't used in general case if it is specially + * needed to detect additional accessory, should implement + * proper operation when this accessory is attached/detached. + */ dev_info(info->dev, "accessory is %s but it isn't used (adc:0x%x)\n", - attached ? "attached" : "detached", adc); - goto out; + attached ? "attached" : "detached", cable_type); + return -EAGAIN; default: dev_err(info->dev, "failed to detect %s accessory (adc:0x%x)\n", - attached ? "attached" : "detached", adc); - ret = -EINVAL; - goto out; + attached ? "attached" : "detached", cable_type); + return -EINVAL; } -out: - return ret; + return 0; } -static int max77693_muic_chg_handler(struct max77693_muic_info *info, - int curr_chg_type, bool attached) +static int max77693_muic_chg_handler(struct max77693_muic_info *info) { - int ret = 0; int chg_type; + int cable_type_gnd; + int cable_type; + bool attached; + bool cable_attached; + int ret = 0; - if (attached) { - /* Store previous charger type to control - when charger accessory will be detached */ - info->prev_chg_type = curr_chg_type; - chg_type = curr_chg_type; - } else - chg_type = info->prev_chg_type; + chg_type = max77693_muic_get_cable_type(info, + MAX77693_CABLE_GROUP_CHG, &attached); dev_info(info->dev, "external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n", attached ? "attached" : "detached", - curr_chg_type, info->prev_chg_type); + chg_type, info->prev_chg_type); switch (chg_type) { case MAX77693_CHARGER_TYPE_USB: - ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached); - if (ret < 0) - goto out; - extcon_set_cable_state(info->edev, "USB", attached); + case MAX77693_CHARGER_TYPE_DEDICATED_CHG: + case MAX77693_CHARGER_TYPE_NONE: + /* Check MAX77693_CABLE_GROUP_ADC_GND type */ + cable_type_gnd = max77693_muic_get_cable_type(info, + MAX77693_CABLE_GROUP_ADC_GND, + &cable_attached); + switch (cable_type_gnd) { + case MAX77693_MUIC_GND_MHL: + case MAX77693_MUIC_GND_MHL_VB: + /* + * MHL cable with MHL_TA(USB/TA) cable + * - MHL cable include two port(HDMI line and separate micro- + * usb port. When the target connect MHL cable, extcon driver + * check whether MHL_TA(USB/TA) cable is connected. If MHL_TA + * cable is connected, extcon driver notify state to notifiee + * for charging battery. + * + * Features of 'MHL_TA(USB/TA) with MHL cable' + * - Support MHL + * - Support charging through micro-usb port without data connection + */ + extcon_set_cable_state(info->edev, "MHL_TA", attached); + if (!cable_attached) + extcon_set_cable_state(info->edev, "MHL", cable_attached); + break; + } + + /* Check MAX77693_CABLE_GROUP_ADC type */ + cable_type = max77693_muic_get_cable_type(info, + MAX77693_CABLE_GROUP_ADC, + &cable_attached); + switch (cable_type) { + case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */ + /* + * Dock-Audio device with USB/TA cable + * - Dock device include two port(Dock-Audio and micro-usb + * port). When the target connect Dock-Audio device, extcon + * driver check whether USB/TA cable is connected. If USB/TA + * cable is connected, extcon driver notify state to notifiee + * for charging battery. + * + * Features of 'USB/TA cable with Dock-Audio device' + * - Support external output feature of audio. + * - Support charging through micro-usb port without data + * connection. + */ + extcon_set_cable_state(info->edev, "USB", attached); + + if (!cable_attached) + extcon_set_cable_state(info->edev, "Dock-Audio", cable_attached); + break; + case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */ + /* + * Dock-Smart device with USB/TA cable + * - Dock-Desk device include three type of cable which + * are HDMI, USB for mouse/keyboard and micro-usb port + * for USB/TA cable. Dock-Smart device need always exteranl + * power supply(USB/TA cable through micro-usb cable). Dock- + * Smart device support screen output of target to separate + * monitor and mouse/keyboard for desktop mode. + * + * Features of 'USB/TA cable with Dock-Smart device' + * - Support MHL + * - Support external output feature of audio + * - Support charging through micro-usb port without data + * connection if TA cable is connected to target. + * - Support charging and data connection through micro-usb port + * if USB cable is connected between target and host + * device. + * - Support OTG device (Mouse/Keyboard) + */ + ret = max77693_muic_set_path(info, info->path_usb, attached); + if (ret < 0) + return ret; + + extcon_set_cable_state(info->edev, "Dock-Smart", attached); + extcon_set_cable_state(info->edev, "MHL", attached); + + break; + } + + /* Check MAX77693_CABLE_GROUP_CHG type */ + switch (chg_type) { + case MAX77693_CHARGER_TYPE_NONE: + /* + * When MHL(with USB/TA cable) or Dock-Audio with USB/TA cable + * is attached, muic device happen below two interrupt. + * - 'MAX77693_MUIC_IRQ_INT1_ADC' for detecting MHL/Dock-Audio. + * - 'MAX77693_MUIC_IRQ_INT2_CHGTYP' for detecting USB/TA cable + * connected to MHL or Dock-Audio. + * Always, happen eariler MAX77693_MUIC_IRQ_INT1_ADC interrupt + * than MAX77693_MUIC_IRQ_INT2_CHGTYP interrupt. + * + * If user attach MHL (with USB/TA cable and immediately detach + * MHL with USB/TA cable before MAX77693_MUIC_IRQ_INT2_CHGTYP + * interrupt is happened, USB/TA cable remain connected state to + * target. But USB/TA cable isn't connected to target. The user + * be face with unusual action. So, driver should check this + * situation in spite of, that previous charger type is N/A. + */ + break; + case MAX77693_CHARGER_TYPE_USB: + /* Only USB cable, PATH:AP_USB */ + ret = max77693_muic_set_path(info, info->path_usb, attached); + if (ret < 0) + return ret; + + extcon_set_cable_state(info->edev, "USB", attached); + break; + case MAX77693_CHARGER_TYPE_DEDICATED_CHG: + /* Only TA cable */ + extcon_set_cable_state(info->edev, "TA", attached); + break; + } break; case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT: extcon_set_cable_state(info->edev, "Charge-downstream", attached); break; - case MAX77693_CHARGER_TYPE_DEDICATED_CHG: - extcon_set_cable_state(info->edev, "TA", attached); - break; case MAX77693_CHARGER_TYPE_APPLE_500MA: extcon_set_cable_state(info->edev, "Slow-charger", attached); break; @@ -498,22 +903,18 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info, dev_err(info->dev, "failed to detect %s accessory (chg_type:0x%x)\n", attached ? "attached" : "detached", chg_type); - ret = -EINVAL; - goto out; + return -EINVAL; } -out: - return ret; + return 0; } static void max77693_muic_irq_work(struct work_struct *work) { struct max77693_muic_info *info = container_of(work, struct max77693_muic_info, irq_work); - int curr_adc, curr_chg_type; int irq_type = -1; int i, ret = 0; - bool attached = true; if (!info->edev) return; @@ -539,14 +940,7 @@ static void max77693_muic_irq_work(struct work_struct *work) case MAX77693_MUIC_IRQ_INT1_ADC1K: /* Handle all of accessory except for type of charger accessory */ - curr_adc = info->status[0] & STATUS1_ADC_MASK; - curr_adc >>= STATUS1_ADC_SHIFT; - - /* Check accessory state which is either detached or attached */ - if (curr_adc == MAX77693_MUIC_ADC_OPEN) - attached = false; - - ret = max77693_muic_adc_handler(info, curr_adc, attached); + ret = max77693_muic_adc_handler(info); break; case MAX77693_MUIC_IRQ_INT2_CHGTYP: case MAX77693_MUIC_IRQ_INT2_CHGDETREUN: @@ -555,15 +949,7 @@ static void max77693_muic_irq_work(struct work_struct *work) case MAX77693_MUIC_IRQ_INT2_VBVOLT: case MAX77693_MUIC_IRQ_INT2_VIDRM: /* Handle charger accessory */ - curr_chg_type = info->status[1] & STATUS2_CHGTYP_MASK; - curr_chg_type >>= STATUS2_CHGTYP_SHIFT; - - /* Check charger accessory state which - is either detached or attached */ - if (curr_chg_type == MAX77693_CHARGER_TYPE_NONE) - attached = false; - - ret = max77693_muic_chg_handler(info, curr_chg_type, attached); + ret = max77693_muic_chg_handler(info); break; case MAX77693_MUIC_IRQ_INT3_EOC: case MAX77693_MUIC_IRQ_INT3_CGMBC: @@ -575,7 +961,8 @@ static void max77693_muic_irq_work(struct work_struct *work) default: dev_err(info->dev, "muic interrupt: irq %d occurred\n", irq_type); - break; + mutex_unlock(&info->mutex); + return; } if (ret < 0) @@ -604,7 +991,9 @@ static struct regmap_config max77693_muic_regmap_config = { static int max77693_muic_detect_accessory(struct max77693_muic_info *info) { int ret = 0; - int adc, chg_type; + int adc; + int chg_type; + bool attached; mutex_lock(&info->mutex); @@ -617,35 +1006,39 @@ static int max77693_muic_detect_accessory(struct max77693_muic_info *info) return -EINVAL; } - adc = info->status[0] & STATUS1_ADC_MASK; - adc >>= STATUS1_ADC_SHIFT; - - if (adc != MAX77693_MUIC_ADC_OPEN) { - dev_info(info->dev, - "external connector is attached (adc:0x%02x)\n", adc); + adc = max77693_muic_get_cable_type(info, MAX77693_CABLE_GROUP_ADC, + &attached); + if (attached && adc != MAX77693_MUIC_ADC_OPEN) { + ret = max77693_muic_adc_handler(info); + if (ret < 0) { + dev_err(info->dev, "Cannot detect accessory\n"); + mutex_unlock(&info->mutex); + return ret; + } + } - ret = max77693_muic_adc_handler(info, adc, true); - if (ret < 0) - dev_err(info->dev, "failed to detect accessory\n"); - goto out; + chg_type = max77693_muic_get_cable_type(info, MAX77693_CABLE_GROUP_CHG, + &attached); + if (attached && chg_type != MAX77693_CHARGER_TYPE_NONE) { + ret = max77693_muic_chg_handler(info); + if (ret < 0) { + dev_err(info->dev, "Cannot detect charger accessory\n"); + mutex_unlock(&info->mutex); + return ret; + } } - chg_type = info->status[1] & STATUS2_CHGTYP_MASK; - chg_type >>= STATUS2_CHGTYP_SHIFT; + mutex_unlock(&info->mutex); - if (chg_type != MAX77693_CHARGER_TYPE_NONE) { - dev_info(info->dev, - "external connector is attached (chg_type:0x%x)\n", - chg_type); + return 0; +} - max77693_muic_chg_handler(info, chg_type, true); - if (ret < 0) - dev_err(info->dev, "failed to detect charger accessory\n"); - } +static void max77693_muic_detect_cable_wq(struct work_struct *work) +{ + struct max77693_muic_info *info = container_of(to_delayed_work(work), + struct max77693_muic_info, wq_detcable); -out: - mutex_unlock(&info->mutex); - return ret; + max77693_muic_detect_accessory(info); } static int max77693_muic_probe(struct platform_device *pdev) @@ -654,7 +1047,9 @@ static int max77693_muic_probe(struct platform_device *pdev) struct max77693_platform_data *pdata = dev_get_platdata(max77693->dev); struct max77693_muic_platform_data *muic_pdata = pdata->muic_data; struct max77693_muic_info *info; - int ret, i; + int delay_jiffies; + int ret; + int i; u8 id; info = devm_kzalloc(&pdev->dev, sizeof(struct max77693_muic_info), @@ -678,6 +1073,32 @@ static int max77693_muic_probe(struct platform_device *pdev) return ret; } } + + /* Register input device for button of dock device */ + info->dock = devm_input_allocate_device(&pdev->dev); + if (!info->dock) { + dev_err(&pdev->dev, "%s: failed to allocate input\n", __func__); + return -ENOMEM; + } + info->dock->name = "max77693-muic/dock"; + info->dock->phys = "max77693-muic/extcon"; + info->dock->dev.parent = &pdev->dev; + + __set_bit(EV_REP, info->dock->evbit); + + input_set_capability(info->dock, EV_KEY, KEY_VOLUMEUP); + input_set_capability(info->dock, EV_KEY, KEY_VOLUMEDOWN); + input_set_capability(info->dock, EV_KEY, KEY_PLAYPAUSE); + input_set_capability(info->dock, EV_KEY, KEY_PREVIOUSSONG); + input_set_capability(info->dock, EV_KEY, KEY_NEXTSONG); + + ret = input_register_device(info->dock); + if (ret < 0) { + dev_err(&pdev->dev, "Cannot register input device error(%d)\n", + ret); + return ret; + } + platform_set_drvdata(pdev, info); mutex_init(&info->mutex); @@ -697,13 +1118,13 @@ static int max77693_muic_probe(struct platform_device *pdev) ret = request_threaded_irq(virq, NULL, max77693_muic_irq_handler, - IRQF_ONESHOT, muic_irq->name, info); + IRQF_NO_SUSPEND, + muic_irq->name, info); if (ret) { dev_err(&pdev->dev, "failed: irq request (IRQ: %d," " error :%d)\n", muic_irq->irq, ret); - goto err_irq; } } @@ -749,23 +1170,54 @@ static int max77693_muic_probe(struct platform_device *pdev) = muic_pdata->init_data[i].data; } + /* + * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB + * h/w path of COMP2/COMN1 on CONTROL1 register. + */ + if (muic_pdata->path_uart) + info->path_uart = muic_pdata->path_uart; + else + info->path_uart = CONTROL1_SW_UART; + + if (muic_pdata->path_usb) + info->path_usb = muic_pdata->path_usb; + else + info->path_usb = CONTROL1_SW_USB; + + /* Set initial path for UART */ + max77693_muic_set_path(info, info->path_uart, true); + /* Check revision number of MUIC device*/ ret = max77693_read_reg(info->max77693->regmap_muic, MAX77693_MUIC_REG_ID, &id); if (ret < 0) { dev_err(&pdev->dev, "failed to read revision number\n"); - goto err_irq; + goto err_extcon; } dev_info(info->dev, "device ID : 0x%x\n", id); /* Set ADC debounce time */ max77693_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS); - /* Detect accessory on boot */ - max77693_muic_detect_accessory(info); + /* + * Detect accessory after completing the initialization of platform + * + * - Use delayed workqueue to detect cable state and then + * notify cable state to notifiee/platform through uevent. + * After completing the booting of platform, the extcon provider + * driver should notify cable state to upper layer. + */ + INIT_DELAYED_WORK(&info->wq_detcable, max77693_muic_detect_cable_wq); + if (muic_pdata->detcable_delay_ms) + delay_jiffies = msecs_to_jiffies(muic_pdata->detcable_delay_ms); + else + delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT); + schedule_delayed_work(&info->wq_detcable, delay_jiffies); return ret; +err_extcon: + extcon_dev_unregister(info->edev); err_irq: while (--i >= 0) free_irq(muic_irqs[i].virq, info); @@ -780,6 +1232,7 @@ static int max77693_muic_remove(struct platform_device *pdev) for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) free_irq(muic_irqs[i].virq, info); cancel_work_sync(&info->irq_work); + input_unregister_device(info->dock); extcon_dev_unregister(info->edev); return 0; diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c index 93009fe6ef05..e636d950ad6c 100644 --- a/drivers/extcon/extcon-max8997.c +++ b/drivers/extcon/extcon-max8997.c @@ -29,51 +29,14 @@ #include <linux/irqdomain.h> #define DEV_NAME "max8997-muic" +#define DELAY_MS_DEFAULT 20000 /* unit: millisecond */ -/* MAX8997-MUIC STATUS1 register */ -#define STATUS1_ADC_SHIFT 0 -#define STATUS1_ADCLOW_SHIFT 5 -#define STATUS1_ADCERR_SHIFT 6 -#define STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT) -#define STATUS1_ADCLOW_MASK (0x1 << STATUS1_ADCLOW_SHIFT) -#define STATUS1_ADCERR_MASK (0x1 << STATUS1_ADCERR_SHIFT) - -/* MAX8997-MUIC STATUS2 register */ -#define STATUS2_CHGTYP_SHIFT 0 -#define STATUS2_CHGDETRUN_SHIFT 3 -#define STATUS2_DCDTMR_SHIFT 4 -#define STATUS2_DBCHG_SHIFT 5 -#define STATUS2_VBVOLT_SHIFT 6 -#define STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT) -#define STATUS2_CHGDETRUN_MASK (0x1 << STATUS2_CHGDETRUN_SHIFT) -#define STATUS2_DCDTMR_MASK (0x1 << STATUS2_DCDTMR_SHIFT) -#define STATUS2_DBCHG_MASK (0x1 << STATUS2_DBCHG_SHIFT) -#define STATUS2_VBVOLT_MASK (0x1 << STATUS2_VBVOLT_SHIFT) - -/* MAX8997-MUIC STATUS3 register */ -#define STATUS3_OVP_SHIFT 2 -#define STATUS3_OVP_MASK (0x1 << STATUS3_OVP_SHIFT) - -/* MAX8997-MUIC CONTROL1 register */ -#define COMN1SW_SHIFT 0 -#define COMP2SW_SHIFT 3 -#define COMN1SW_MASK (0x7 << COMN1SW_SHIFT) -#define COMP2SW_MASK (0x7 << COMP2SW_SHIFT) -#define SW_MASK (COMP2SW_MASK | COMN1SW_MASK) - -#define MAX8997_SW_USB ((1 << COMP2SW_SHIFT) | (1 << COMN1SW_SHIFT)) -#define MAX8997_SW_AUDIO ((2 << COMP2SW_SHIFT) | (2 << COMN1SW_SHIFT)) -#define MAX8997_SW_UART ((3 << COMP2SW_SHIFT) | (3 << COMN1SW_SHIFT)) -#define MAX8997_SW_OPEN ((0 << COMP2SW_SHIFT) | (0 << COMN1SW_SHIFT)) - -#define MAX8997_ADC_GROUND 0x00 -#define MAX8997_ADC_MHL 0x01 -#define MAX8997_ADC_JIG_USB_1 0x18 -#define MAX8997_ADC_JIG_USB_2 0x19 -#define MAX8997_ADC_DESKDOCK 0x1a -#define MAX8997_ADC_JIG_UART 0x1c -#define MAX8997_ADC_CARDOCK 0x1d -#define MAX8997_ADC_OPEN 0x1f +enum max8997_muic_adc_debounce_time { + ADC_DEBOUNCE_TIME_0_5MS = 0, /* 0.5ms */ + ADC_DEBOUNCE_TIME_10MS, /* 10ms */ + ADC_DEBOUNCE_TIME_25MS, /* 25ms */ + ADC_DEBOUNCE_TIME_38_62MS, /* 38.62ms */ +}; struct max8997_muic_irq { unsigned int irq; @@ -82,61 +45,303 @@ struct max8997_muic_irq { }; static struct max8997_muic_irq muic_irqs[] = { - { MAX8997_MUICIRQ_ADCError, "muic-ADC_error" }, - { MAX8997_MUICIRQ_ADCLow, "muic-ADC_low" }, - { MAX8997_MUICIRQ_ADC, "muic-ADC" }, - { MAX8997_MUICIRQ_VBVolt, "muic-VB_voltage" }, - { MAX8997_MUICIRQ_DBChg, "muic-DB_charger" }, - { MAX8997_MUICIRQ_DCDTmr, "muic-DCD_timer" }, - { MAX8997_MUICIRQ_ChgDetRun, "muic-CDR_status" }, - { MAX8997_MUICIRQ_ChgTyp, "muic-charger_type" }, - { MAX8997_MUICIRQ_OVP, "muic-over_voltage" }, + { MAX8997_MUICIRQ_ADCError, "muic-ADCERROR" }, + { MAX8997_MUICIRQ_ADCLow, "muic-ADCLOW" }, + { MAX8997_MUICIRQ_ADC, "muic-ADC" }, + { MAX8997_MUICIRQ_VBVolt, "muic-VBVOLT" }, + { MAX8997_MUICIRQ_DBChg, "muic-DBCHG" }, + { MAX8997_MUICIRQ_DCDTmr, "muic-DCDTMR" }, + { MAX8997_MUICIRQ_ChgDetRun, "muic-CHGDETRUN" }, + { MAX8997_MUICIRQ_ChgTyp, "muic-CHGTYP" }, + { MAX8997_MUICIRQ_OVP, "muic-OVP" }, +}; + +/* Define supported cable type */ +enum max8997_muic_acc_type { + MAX8997_MUIC_ADC_GROUND = 0x0, + MAX8997_MUIC_ADC_MHL, /* MHL*/ + MAX8997_MUIC_ADC_REMOTE_S1_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S2_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S3_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S4_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S5_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S6_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S7_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S8_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S9_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S10_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S11_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S12_BUTTON, + MAX8997_MUIC_ADC_RESERVED_ACC_1, + MAX8997_MUIC_ADC_RESERVED_ACC_2, + MAX8997_MUIC_ADC_RESERVED_ACC_3, + MAX8997_MUIC_ADC_RESERVED_ACC_4, + MAX8997_MUIC_ADC_RESERVED_ACC_5, + MAX8997_MUIC_ADC_CEA936_AUDIO, + MAX8997_MUIC_ADC_PHONE_POWERED_DEV, + MAX8997_MUIC_ADC_TTY_CONVERTER, + MAX8997_MUIC_ADC_UART_CABLE, + MAX8997_MUIC_ADC_CEA936A_TYPE1_CHG, + MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF, /* JIG-USB-OFF */ + MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON, /* JIG-USB-ON */ + MAX8997_MUIC_ADC_AV_CABLE_NOLOAD, /* DESKDOCK */ + MAX8997_MUIC_ADC_CEA936A_TYPE2_CHG, + MAX8997_MUIC_ADC_FACTORY_MODE_UART_OFF, /* JIG-UART */ + MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON, /* CARDOCK */ + MAX8997_MUIC_ADC_AUDIO_MODE_REMOTE, + MAX8997_MUIC_ADC_OPEN, /* OPEN */ +}; + +enum max8997_muic_cable_group { + MAX8997_CABLE_GROUP_ADC = 0, + MAX8997_CABLE_GROUP_ADC_GND, + MAX8997_CABLE_GROUP_CHG, + MAX8997_CABLE_GROUP_VBVOLT, +}; + +enum max8997_muic_usb_type { + MAX8997_USB_HOST, + MAX8997_USB_DEVICE, +}; + +enum max8997_muic_charger_type { + MAX8997_CHARGER_TYPE_NONE = 0, + MAX8997_CHARGER_TYPE_USB, + MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT, + MAX8997_CHARGER_TYPE_DEDICATED_CHG, + MAX8997_CHARGER_TYPE_500MA, + MAX8997_CHARGER_TYPE_1A, + MAX8997_CHARGER_TYPE_DEAD_BATTERY = 7, }; struct max8997_muic_info { struct device *dev; struct i2c_client *muic; - struct max8997_muic_platform_data *muic_pdata; + struct extcon_dev *edev; + int prev_cable_type; + int prev_chg_type; + u8 status[2]; int irq; struct work_struct irq_work; + struct mutex mutex; + struct max8997_muic_platform_data *muic_pdata; enum max8997_muic_charger_type pre_charger_type; - int pre_adc; - struct mutex mutex; + /* + * Use delayed workqueue to detect cable state and then + * notify cable state to notifiee/platform through uevent. + * After completing the booting of platform, the extcon provider + * driver should notify cable state to upper layer. + */ + struct delayed_work wq_detcable; + + /* + * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB + * h/w path of COMP2/COMN1 on CONTROL1 register. + */ + int path_usb; + int path_uart; +}; - struct extcon_dev *edev; +enum { + EXTCON_CABLE_USB = 0, + EXTCON_CABLE_USB_HOST, + EXTCON_CABLE_TA, + EXTCON_CABLE_FAST_CHARGER, + EXTCON_CABLE_SLOW_CHARGER, + EXTCON_CABLE_CHARGE_DOWNSTREAM, + EXTCON_CABLE_MHL, + EXTCON_CABLE_DOCK_DESK, + EXTCON_CABLE_DOCK_CARD, + EXTCON_CABLE_JIG, + + _EXTCON_CABLE_NUM, }; -const char *max8997_extcon_cable[] = { - [0] = "USB", - [1] = "USB-Host", - [2] = "TA", - [3] = "Fast-charger", - [4] = "Slow-charger", - [5] = "Charge-downstream", - [6] = "MHL", - [7] = "Dock-desk", - [8] = "Dock-card", - [9] = "JIG", +static const char *max8997_extcon_cable[] = { + [EXTCON_CABLE_USB] = "USB", + [EXTCON_CABLE_USB_HOST] = "USB-Host", + [EXTCON_CABLE_TA] = "TA", + [EXTCON_CABLE_FAST_CHARGER] = "Fast-charger", + [EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger", + [EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream", + [EXTCON_CABLE_MHL] = "MHL", + [EXTCON_CABLE_DOCK_DESK] = "Dock-Desk", + [EXTCON_CABLE_DOCK_CARD] = "Dock-Card", + [EXTCON_CABLE_JIG] = "JIG", NULL, }; +/* + * max8997_muic_set_debounce_time - Set the debounce time of ADC + * @info: the instance including private data of max8997 MUIC + * @time: the debounce time of ADC + */ +static int max8997_muic_set_debounce_time(struct max8997_muic_info *info, + enum max8997_muic_adc_debounce_time time) +{ + int ret; + + switch (time) { + case ADC_DEBOUNCE_TIME_0_5MS: + case ADC_DEBOUNCE_TIME_10MS: + case ADC_DEBOUNCE_TIME_25MS: + case ADC_DEBOUNCE_TIME_38_62MS: + ret = max8997_update_reg(info->muic, + MAX8997_MUIC_REG_CONTROL3, + time << CONTROL3_ADCDBSET_SHIFT, + CONTROL3_ADCDBSET_MASK); + if (ret) { + dev_err(info->dev, "failed to set ADC debounce time\n"); + return -EAGAIN; + } + break; + default: + dev_err(info->dev, "invalid ADC debounce time\n"); + return -EINVAL; + } + + return 0; +}; + +/* + * max8997_muic_set_path - Set hardware line according to attached cable + * @info: the instance including private data of max8997 MUIC + * @value: the path according to attached cable + * @attached: the state of cable (true:attached, false:detached) + * + * The max8997 MUIC device share outside H/W line among a varity of cables, + * so this function set internal path of H/W line according to the type of + * attached cable. + */ +static int max8997_muic_set_path(struct max8997_muic_info *info, + u8 val, bool attached) +{ + int ret = 0; + u8 ctrl1, ctrl2 = 0; + + if (attached) + ctrl1 = val; + else + ctrl1 = CONTROL1_SW_OPEN; + + ret = max8997_update_reg(info->muic, + MAX8997_MUIC_REG_CONTROL1, ctrl1, COMP_SW_MASK); + if (ret < 0) { + dev_err(info->dev, "failed to update MUIC register\n"); + return -EAGAIN; + } + + if (attached) + ctrl2 |= CONTROL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */ + else + ctrl2 |= CONTROL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */ + + ret = max8997_update_reg(info->muic, + MAX8997_MUIC_REG_CONTROL2, ctrl2, + CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK); + if (ret < 0) { + dev_err(info->dev, "failed to update MUIC register\n"); + return -EAGAIN; + } + + dev_info(info->dev, + "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n", + ctrl1, ctrl2, attached ? "attached" : "detached"); + + return 0; +} + +/* + * max8997_muic_get_cable_type - Return cable type and check cable state + * @info: the instance including private data of max8997 MUIC + * @group: the path according to attached cable + * @attached: store cable state and return + * + * This function check the cable state either attached or detached, + * and then divide precise type of cable according to cable group. + * - MAX8997_CABLE_GROUP_ADC + * - MAX8997_CABLE_GROUP_CHG + */ +static int max8997_muic_get_cable_type(struct max8997_muic_info *info, + enum max8997_muic_cable_group group, bool *attached) +{ + int cable_type = 0; + int adc; + int chg_type; + + switch (group) { + case MAX8997_CABLE_GROUP_ADC: + /* + * Read ADC value to check cable type and decide cable state + * according to cable type + */ + adc = info->status[0] & STATUS1_ADC_MASK; + adc >>= STATUS1_ADC_SHIFT; + + /* + * Check current cable state/cable type and store cable type + * (info->prev_cable_type) for handling cable when cable is + * detached. + */ + if (adc == MAX8997_MUIC_ADC_OPEN) { + *attached = false; + + cable_type = info->prev_cable_type; + info->prev_cable_type = MAX8997_MUIC_ADC_OPEN; + } else { + *attached = true; + + cable_type = info->prev_cable_type = adc; + } + break; + case MAX8997_CABLE_GROUP_CHG: + /* + * Read charger type to check cable type and decide cable state + * according to type of charger cable. + */ + chg_type = info->status[1] & STATUS2_CHGTYP_MASK; + chg_type >>= STATUS2_CHGTYP_SHIFT; + + if (chg_type == MAX8997_CHARGER_TYPE_NONE) { + *attached = false; + + cable_type = info->prev_chg_type; + info->prev_chg_type = MAX8997_CHARGER_TYPE_NONE; + } else { + *attached = true; + + /* + * Check current cable state/cable type and store cable + * type(info->prev_chg_type) for handling cable when + * charger cable is detached. + */ + cable_type = info->prev_chg_type = chg_type; + } + + break; + default: + dev_err(info->dev, "Unknown cable group (%d)\n", group); + cable_type = -EINVAL; + break; + } + + return cable_type; +} + static int max8997_muic_handle_usb(struct max8997_muic_info *info, enum max8997_muic_usb_type usb_type, bool attached) { int ret = 0; if (usb_type == MAX8997_USB_HOST) { - /* switch to USB */ - ret = max8997_update_reg(info->muic, MAX8997_MUIC_REG_CONTROL1, - attached ? MAX8997_SW_USB : MAX8997_SW_OPEN, - SW_MASK); - if (ret) { + ret = max8997_muic_set_path(info, info->path_usb, attached); + if (ret < 0) { dev_err(info->dev, "failed to update muic register\n"); - goto out; + return ret; } } @@ -148,41 +353,39 @@ static int max8997_muic_handle_usb(struct max8997_muic_info *info, extcon_set_cable_state(info->edev, "USB", attached); break; default: - ret = -EINVAL; - break; + dev_err(info->dev, "failed to detect %s usb cable\n", + attached ? "attached" : "detached"); + return -EINVAL; } -out: - return ret; + return 0; } static int max8997_muic_handle_dock(struct max8997_muic_info *info, - int adc, bool attached) + int cable_type, bool attached) { int ret = 0; - /* switch to AUDIO */ - ret = max8997_update_reg(info->muic, MAX8997_MUIC_REG_CONTROL1, - attached ? MAX8997_SW_AUDIO : MAX8997_SW_OPEN, - SW_MASK); + ret = max8997_muic_set_path(info, CONTROL1_SW_AUDIO, attached); if (ret) { dev_err(info->dev, "failed to update muic register\n"); - goto out; + return ret; } - switch (adc) { - case MAX8997_ADC_DESKDOCK: + switch (cable_type) { + case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD: extcon_set_cable_state(info->edev, "Dock-desk", attached); break; - case MAX8997_ADC_CARDOCK: + case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON: extcon_set_cable_state(info->edev, "Dock-card", attached); break; default: - ret = -EINVAL; - break; + dev_err(info->dev, "failed to detect %s dock device\n", + attached ? "attached" : "detached"); + return -EINVAL; } -out: - return ret; + + return 0; } static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info, @@ -191,199 +394,188 @@ static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info, int ret = 0; /* switch to UART */ - ret = max8997_update_reg(info->muic, MAX8997_MUIC_REG_CONTROL1, - attached ? MAX8997_SW_UART : MAX8997_SW_OPEN, - SW_MASK); + ret = max8997_muic_set_path(info, info->path_uart, attached); if (ret) { dev_err(info->dev, "failed to update muic register\n"); - goto out; + return -EINVAL; } extcon_set_cable_state(info->edev, "JIG", attached); -out: - return ret; -} - -static int max8997_muic_handle_adc_detach(struct max8997_muic_info *info) -{ - int ret = 0; - switch (info->pre_adc) { - case MAX8997_ADC_GROUND: - ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, false); - break; - case MAX8997_ADC_MHL: - extcon_set_cable_state(info->edev, "MHL", false); - break; - case MAX8997_ADC_JIG_USB_1: - case MAX8997_ADC_JIG_USB_2: - ret = max8997_muic_handle_usb(info, MAX8997_USB_DEVICE, false); - break; - case MAX8997_ADC_DESKDOCK: - case MAX8997_ADC_CARDOCK: - ret = max8997_muic_handle_dock(info, info->pre_adc, false); - break; - case MAX8997_ADC_JIG_UART: - ret = max8997_muic_handle_jig_uart(info, false); - break; - default: - break; - } - - return ret; + return 0; } -static int max8997_muic_handle_adc(struct max8997_muic_info *info, int adc) +static int max8997_muic_adc_handler(struct max8997_muic_info *info) { + int cable_type; + bool attached; int ret = 0; - switch (adc) { - case MAX8997_ADC_GROUND: - ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, true); - break; - case MAX8997_ADC_MHL: - extcon_set_cable_state(info->edev, "MHL", true); - break; - case MAX8997_ADC_JIG_USB_1: - case MAX8997_ADC_JIG_USB_2: - ret = max8997_muic_handle_usb(info, MAX8997_USB_DEVICE, true); - break; - case MAX8997_ADC_DESKDOCK: - case MAX8997_ADC_CARDOCK: - ret = max8997_muic_handle_dock(info, adc, true); - break; - case MAX8997_ADC_JIG_UART: - ret = max8997_muic_handle_jig_uart(info, true); - break; - case MAX8997_ADC_OPEN: - ret = max8997_muic_handle_adc_detach(info); - break; - default: - ret = -EINVAL; - goto out; - } - - info->pre_adc = adc; -out: - return ret; -} - -static int max8997_muic_handle_charger_type_detach( - struct max8997_muic_info *info) -{ - switch (info->pre_charger_type) { - case MAX8997_CHARGER_TYPE_USB: - extcon_set_cable_state(info->edev, "USB", false); - break; - case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT: - extcon_set_cable_state(info->edev, "Charge-downstream", false); - break; - case MAX8997_CHARGER_TYPE_DEDICATED_CHG: - extcon_set_cable_state(info->edev, "TA", false); - break; - case MAX8997_CHARGER_TYPE_500MA: - extcon_set_cable_state(info->edev, "Slow-charger", false); - break; - case MAX8997_CHARGER_TYPE_1A: - extcon_set_cable_state(info->edev, "Fast-charger", false); - break; + /* Check cable state which is either detached or attached */ + cable_type = max8997_muic_get_cable_type(info, + MAX8997_CABLE_GROUP_ADC, &attached); + + switch (cable_type) { + case MAX8997_MUIC_ADC_GROUND: + ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, attached); + if (ret < 0) + return ret; + break; + case MAX8997_MUIC_ADC_MHL: + extcon_set_cable_state(info->edev, "MHL", attached); + break; + case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF: + case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON: + ret = max8997_muic_handle_usb(info, MAX8997_USB_DEVICE, attached); + if (ret < 0) + return ret; + break; + case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD: + case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON: + ret = max8997_muic_handle_dock(info, cable_type, attached); + if (ret < 0) + return ret; + break; + case MAX8997_MUIC_ADC_FACTORY_MODE_UART_OFF: + ret = max8997_muic_handle_jig_uart(info, attached); + break; + case MAX8997_MUIC_ADC_REMOTE_S1_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S2_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S3_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S4_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S5_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S6_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S7_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S8_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S9_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S10_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S11_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S12_BUTTON: + case MAX8997_MUIC_ADC_RESERVED_ACC_1: + case MAX8997_MUIC_ADC_RESERVED_ACC_2: + case MAX8997_MUIC_ADC_RESERVED_ACC_3: + case MAX8997_MUIC_ADC_RESERVED_ACC_4: + case MAX8997_MUIC_ADC_RESERVED_ACC_5: + case MAX8997_MUIC_ADC_CEA936_AUDIO: + case MAX8997_MUIC_ADC_PHONE_POWERED_DEV: + case MAX8997_MUIC_ADC_TTY_CONVERTER: + case MAX8997_MUIC_ADC_UART_CABLE: + case MAX8997_MUIC_ADC_CEA936A_TYPE1_CHG: + case MAX8997_MUIC_ADC_CEA936A_TYPE2_CHG: + case MAX8997_MUIC_ADC_AUDIO_MODE_REMOTE: + /* + * This cable isn't used in general case if it is specially + * needed to detect additional cable, should implement + * proper operation when this cable is attached/detached. + */ + dev_info(info->dev, + "cable is %s but it isn't used (type:0x%x)\n", + attached ? "attached" : "detached", cable_type); + return -EAGAIN; default: + dev_err(info->dev, + "failed to detect %s unknown cable (type:0x%x)\n", + attached ? "attached" : "detached", cable_type); return -EINVAL; - break; } return 0; } -static int max8997_muic_handle_charger_type(struct max8997_muic_info *info, - enum max8997_muic_charger_type charger_type) +static int max8997_muic_chg_handler(struct max8997_muic_info *info) { - u8 adc; - int ret; + int chg_type; + bool attached; + int adc; - ret = max8997_read_reg(info->muic, MAX8997_MUIC_REG_STATUS1, &adc); - if (ret) { - dev_err(info->dev, "failed to read muic register\n"); - goto out; - } + chg_type = max8997_muic_get_cable_type(info, + MAX8997_CABLE_GROUP_CHG, &attached); - switch (charger_type) { + switch (chg_type) { case MAX8997_CHARGER_TYPE_NONE: - ret = max8997_muic_handle_charger_type_detach(info); break; case MAX8997_CHARGER_TYPE_USB: - if ((adc & STATUS1_ADC_MASK) == MAX8997_ADC_OPEN) { + adc = info->status[0] & STATUS1_ADC_MASK; + adc >>= STATUS1_ADC_SHIFT; + + if ((adc & STATUS1_ADC_MASK) == MAX8997_MUIC_ADC_OPEN) { max8997_muic_handle_usb(info, - MAX8997_USB_DEVICE, true); + MAX8997_USB_DEVICE, attached); } break; case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT: - extcon_set_cable_state(info->edev, "Charge-downstream", true); + extcon_set_cable_state(info->edev, "Charge-downstream", attached); break; case MAX8997_CHARGER_TYPE_DEDICATED_CHG: - extcon_set_cable_state(info->edev, "TA", true); + extcon_set_cable_state(info->edev, "TA", attached); break; case MAX8997_CHARGER_TYPE_500MA: - extcon_set_cable_state(info->edev, "Slow-charger", true); + extcon_set_cable_state(info->edev, "Slow-charger", attached); break; case MAX8997_CHARGER_TYPE_1A: - extcon_set_cable_state(info->edev, "Fast-charger", true); + extcon_set_cable_state(info->edev, "Fast-charger", attached); break; default: - ret = -EINVAL; - goto out; + dev_err(info->dev, + "failed to detect %s unknown chg cable (type:0x%x)\n", + attached ? "attached" : "detached", chg_type); + return -EINVAL; } - info->pre_charger_type = charger_type; -out: - return ret; + return 0; } static void max8997_muic_irq_work(struct work_struct *work) { struct max8997_muic_info *info = container_of(work, struct max8997_muic_info, irq_work); - u8 status[2]; - u8 adc, chg_type; int irq_type = 0; int i, ret; + if (!info->edev) + return; + mutex_lock(&info->mutex); + for (i = 0 ; i < ARRAY_SIZE(muic_irqs) ; i++) + if (info->irq == muic_irqs[i].virq) + irq_type = muic_irqs[i].irq; + ret = max8997_bulk_read(info->muic, MAX8997_MUIC_REG_STATUS1, - 2, status); + 2, info->status); if (ret) { dev_err(info->dev, "failed to read muic register\n"); mutex_unlock(&info->mutex); return; } - dev_dbg(info->dev, "%s: STATUS1:0x%x, 2:0x%x\n", __func__, - status[0], status[1]); - - for (i = 0 ; i < ARRAY_SIZE(muic_irqs) ; i++) - if (info->irq == muic_irqs[i].virq) - irq_type = muic_irqs[i].irq; - switch (irq_type) { + case MAX8997_MUICIRQ_ADCError: + case MAX8997_MUICIRQ_ADCLow: case MAX8997_MUICIRQ_ADC: - adc = status[0] & STATUS1_ADC_MASK; - adc >>= STATUS1_ADC_SHIFT; - - max8997_muic_handle_adc(info, adc); + /* Handle all of cable except for charger cable */ + ret = max8997_muic_adc_handler(info); break; + case MAX8997_MUICIRQ_VBVolt: + case MAX8997_MUICIRQ_DBChg: + case MAX8997_MUICIRQ_DCDTmr: + case MAX8997_MUICIRQ_ChgDetRun: case MAX8997_MUICIRQ_ChgTyp: - chg_type = status[1] & STATUS2_CHGTYP_MASK; - chg_type >>= STATUS2_CHGTYP_SHIFT; - - max8997_muic_handle_charger_type(info, chg_type); + /* Handle charger cable */ + ret = max8997_muic_chg_handler(info); + break; + case MAX8997_MUICIRQ_OVP: break; default: dev_info(info->dev, "misc interrupt: irq %d occurred\n", irq_type); - break; + mutex_unlock(&info->mutex); + return; } + if (ret < 0) + dev_err(info->dev, "failed to handle MUIC interrupt\n"); + mutex_unlock(&info->mutex); return; @@ -401,29 +593,60 @@ static irqreturn_t max8997_muic_irq_handler(int irq, void *data) return IRQ_HANDLED; } -static void max8997_muic_detect_dev(struct max8997_muic_info *info) +static int max8997_muic_detect_dev(struct max8997_muic_info *info) { - int ret; - u8 status[2], adc, chg_type; + int ret = 0; + int adc; + int chg_type; + bool attached; - ret = max8997_bulk_read(info->muic, MAX8997_MUIC_REG_STATUS1, - 2, status); + mutex_lock(&info->mutex); + + /* Read STATUSx register to detect accessory */ + ret = max8997_bulk_read(info->muic, + MAX8997_MUIC_REG_STATUS1, 2, info->status); if (ret) { - dev_err(info->dev, "failed to read muic register\n"); - return; + dev_err(info->dev, "failed to read MUIC register\n"); + mutex_unlock(&info->mutex); + return -EINVAL; } - dev_info(info->dev, "STATUS1:0x%x, STATUS2:0x%x\n", - status[0], status[1]); + adc = max8997_muic_get_cable_type(info, MAX8997_CABLE_GROUP_ADC, + &attached); + if (attached && adc != MAX8997_MUIC_ADC_OPEN) { + ret = max8997_muic_adc_handler(info); + if (ret < 0) { + dev_err(info->dev, "Cannot detect ADC cable\n"); + mutex_unlock(&info->mutex); + return ret; + } + } - adc = status[0] & STATUS1_ADC_MASK; - adc >>= STATUS1_ADC_SHIFT; + chg_type = max8997_muic_get_cable_type(info, MAX8997_CABLE_GROUP_CHG, + &attached); + if (attached && chg_type != MAX8997_CHARGER_TYPE_NONE) { + ret = max8997_muic_chg_handler(info); + if (ret < 0) { + dev_err(info->dev, "Cannot detect charger cable\n"); + mutex_unlock(&info->mutex); + return ret; + } + } + + mutex_unlock(&info->mutex); + + return 0; +} - chg_type = status[1] & STATUS2_CHGTYP_MASK; - chg_type >>= STATUS2_CHGTYP_SHIFT; +static void max8997_muic_detect_cable_wq(struct work_struct *work) +{ + struct max8997_muic_info *info = container_of(to_delayed_work(work), + struct max8997_muic_info, wq_detcable); + int ret; - max8997_muic_handle_adc(info, adc); - max8997_muic_handle_charger_type(info, chg_type); + ret = max8997_muic_detect_dev(info); + if (ret < 0) + pr_err("failed to detect cable type\n"); } static int max8997_muic_probe(struct platform_device *pdev) @@ -431,6 +654,7 @@ static int max8997_muic_probe(struct platform_device *pdev) struct max8997_dev *max8997 = dev_get_drvdata(pdev->dev.parent); struct max8997_platform_data *pdata = dev_get_platdata(max8997->dev); struct max8997_muic_info *info; + int delay_jiffies; int ret, i; info = devm_kzalloc(&pdev->dev, sizeof(struct max8997_muic_info), @@ -459,8 +683,10 @@ static int max8997_muic_probe(struct platform_device *pdev) } muic_irq->virq = virq; - ret = request_threaded_irq(virq, NULL, max8997_muic_irq_handler, - 0, muic_irq->name, info); + ret = request_threaded_irq(virq, NULL, + max8997_muic_irq_handler, + IRQF_NO_SUSPEND, + muic_irq->name, info); if (ret) { dev_err(&pdev->dev, "failed: irq request (IRQ: %d," @@ -496,10 +722,42 @@ static int max8997_muic_probe(struct platform_device *pdev) } } - /* Initial device detection */ - max8997_muic_detect_dev(info); + /* + * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB + * h/w path of COMP2/COMN1 on CONTROL1 register. + */ + if (pdata->muic_pdata->path_uart) + info->path_uart = pdata->muic_pdata->path_uart; + else + info->path_uart = CONTROL1_SW_UART; + + if (pdata->muic_pdata->path_usb) + info->path_usb = pdata->muic_pdata->path_usb; + else + info->path_usb = CONTROL1_SW_USB; + + /* Set initial path for UART */ + max8997_muic_set_path(info, info->path_uart, true); + + /* Set ADC debounce time */ + max8997_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS); + + /* + * Detect accessory after completing the initialization of platform + * + * - Use delayed workqueue to detect cable state and then + * notify cable state to notifiee/platform through uevent. + * After completing the booting of platform, the extcon provider + * driver should notify cable state to upper layer. + */ + INIT_DELAYED_WORK(&info->wq_detcable, max8997_muic_detect_cable_wq); + if (pdata->muic_pdata->detcable_delay_ms) + delay_jiffies = msecs_to_jiffies(pdata->muic_pdata->detcable_delay_ms); + else + delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT); + schedule_delayed_work(&info->wq_detcable, delay_jiffies); - return ret; + return 0; err_irq: while (--i >= 0) |