diff options
Diffstat (limited to 'drivers/cxl/pci.c')
| -rw-r--r-- | drivers/cxl/pci.c | 924 |
1 files changed, 2 insertions, 922 deletions
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c index 9d8050fdd69c..c9f2ac134f4d 100644 --- a/drivers/cxl/pci.c +++ b/drivers/cxl/pci.c @@ -1,16 +1,12 @@ // SPDX-License-Identifier: GPL-2.0-only /* Copyright(c) 2020 Intel Corporation. All rights reserved. */ -#include <uapi/linux/cxl_mem.h> -#include <linux/security.h> -#include <linux/debugfs.h> +#include <linux/io-64-nonatomic-lo-hi.h> #include <linux/module.h> #include <linux/sizes.h> #include <linux/mutex.h> #include <linux/list.h> -#include <linux/cdev.h> #include <linux/pci.h> #include <linux/io.h> -#include <linux/io-64-nonatomic-lo-hi.h> #include "cxlmem.h" #include "pci.h" #include "cxl.h" @@ -37,162 +33,6 @@ /* CXL 2.0 - 8.2.8.4 */ #define CXL_MAILBOX_TIMEOUT_MS (2 * HZ) -enum opcode { - CXL_MBOX_OP_INVALID = 0x0000, - CXL_MBOX_OP_RAW = CXL_MBOX_OP_INVALID, - CXL_MBOX_OP_GET_FW_INFO = 0x0200, - CXL_MBOX_OP_ACTIVATE_FW = 0x0202, - CXL_MBOX_OP_GET_SUPPORTED_LOGS = 0x0400, - CXL_MBOX_OP_GET_LOG = 0x0401, - CXL_MBOX_OP_IDENTIFY = 0x4000, - CXL_MBOX_OP_GET_PARTITION_INFO = 0x4100, - CXL_MBOX_OP_SET_PARTITION_INFO = 0x4101, - CXL_MBOX_OP_GET_LSA = 0x4102, - CXL_MBOX_OP_SET_LSA = 0x4103, - CXL_MBOX_OP_GET_HEALTH_INFO = 0x4200, - CXL_MBOX_OP_GET_ALERT_CONFIG = 0x4201, - CXL_MBOX_OP_SET_ALERT_CONFIG = 0x4202, - CXL_MBOX_OP_GET_SHUTDOWN_STATE = 0x4203, - CXL_MBOX_OP_SET_SHUTDOWN_STATE = 0x4204, - CXL_MBOX_OP_GET_POISON = 0x4300, - CXL_MBOX_OP_INJECT_POISON = 0x4301, - CXL_MBOX_OP_CLEAR_POISON = 0x4302, - CXL_MBOX_OP_GET_SCAN_MEDIA_CAPS = 0x4303, - CXL_MBOX_OP_SCAN_MEDIA = 0x4304, - CXL_MBOX_OP_GET_SCAN_MEDIA = 0x4305, - CXL_MBOX_OP_MAX = 0x10000 -}; - -static DECLARE_RWSEM(cxl_memdev_rwsem); -static struct dentry *cxl_debugfs; -static bool cxl_raw_allow_all; - -enum { - CEL_UUID, - VENDOR_DEBUG_UUID, -}; - -/* See CXL 2.0 Table 170. Get Log Input Payload */ -static const uuid_t log_uuid[] = { - [CEL_UUID] = UUID_INIT(0xda9c0b5, 0xbf41, 0x4b78, 0x8f, 0x79, 0x96, - 0xb1, 0x62, 0x3b, 0x3f, 0x17), - [VENDOR_DEBUG_UUID] = UUID_INIT(0xe1819d9, 0x11a9, 0x400c, 0x81, 0x1f, - 0xd6, 0x07, 0x19, 0x40, 0x3d, 0x86), -}; - -/** - * struct cxl_mem_command - Driver representation of a memory device command - * @info: Command information as it exists for the UAPI - * @opcode: The actual bits used for the mailbox protocol - * @flags: Set of flags effecting driver behavior. - * - * * %CXL_CMD_FLAG_FORCE_ENABLE: In cases of error, commands with this flag - * will be enabled by the driver regardless of what hardware may have - * advertised. - * - * The cxl_mem_command is the driver's internal representation of commands that - * are supported by the driver. Some of these commands may not be supported by - * the hardware. The driver will use @info to validate the fields passed in by - * the user then submit the @opcode to the hardware. - * - * See struct cxl_command_info. - */ -struct cxl_mem_command { - struct cxl_command_info info; - enum opcode opcode; - u32 flags; -#define CXL_CMD_FLAG_NONE 0 -#define CXL_CMD_FLAG_FORCE_ENABLE BIT(0) -}; - -#define CXL_CMD(_id, sin, sout, _flags) \ - [CXL_MEM_COMMAND_ID_##_id] = { \ - .info = { \ - .id = CXL_MEM_COMMAND_ID_##_id, \ - .size_in = sin, \ - .size_out = sout, \ - }, \ - .opcode = CXL_MBOX_OP_##_id, \ - .flags = _flags, \ - } - -/* - * This table defines the supported mailbox commands for the driver. This table - * is made up of a UAPI structure. Non-negative values as parameters in the - * table will be validated against the user's input. For example, if size_in is - * 0, and the user passed in 1, it is an error. - */ -static struct cxl_mem_command mem_commands[CXL_MEM_COMMAND_ID_MAX] = { - CXL_CMD(IDENTIFY, 0, 0x43, CXL_CMD_FLAG_FORCE_ENABLE), -#ifdef CONFIG_CXL_MEM_RAW_COMMANDS - CXL_CMD(RAW, ~0, ~0, 0), -#endif - CXL_CMD(GET_SUPPORTED_LOGS, 0, ~0, CXL_CMD_FLAG_FORCE_ENABLE), - CXL_CMD(GET_FW_INFO, 0, 0x50, 0), - CXL_CMD(GET_PARTITION_INFO, 0, 0x20, 0), - CXL_CMD(GET_LSA, 0x8, ~0, 0), - CXL_CMD(GET_HEALTH_INFO, 0, 0x12, 0), - CXL_CMD(GET_LOG, 0x18, ~0, CXL_CMD_FLAG_FORCE_ENABLE), - CXL_CMD(SET_PARTITION_INFO, 0x0a, 0, 0), - CXL_CMD(SET_LSA, ~0, 0, 0), - CXL_CMD(GET_ALERT_CONFIG, 0, 0x10, 0), - CXL_CMD(SET_ALERT_CONFIG, 0xc, 0, 0), - CXL_CMD(GET_SHUTDOWN_STATE, 0, 0x1, 0), - CXL_CMD(SET_SHUTDOWN_STATE, 0x1, 0, 0), - CXL_CMD(GET_POISON, 0x10, ~0, 0), - CXL_CMD(INJECT_POISON, 0x8, 0, 0), - CXL_CMD(CLEAR_POISON, 0x48, 0, 0), - CXL_CMD(GET_SCAN_MEDIA_CAPS, 0x10, 0x4, 0), - CXL_CMD(SCAN_MEDIA, 0x11, 0, 0), - CXL_CMD(GET_SCAN_MEDIA, 0, ~0, 0), -}; - -/* - * Commands that RAW doesn't permit. The rationale for each: - * - * CXL_MBOX_OP_ACTIVATE_FW: Firmware activation requires adjustment / - * coordination of transaction timeout values at the root bridge level. - * - * CXL_MBOX_OP_SET_PARTITION_INFO: The device memory map may change live - * and needs to be coordinated with HDM updates. - * - * CXL_MBOX_OP_SET_LSA: The label storage area may be cached by the - * driver and any writes from userspace invalidates those contents. - * - * CXL_MBOX_OP_SET_SHUTDOWN_STATE: Set shutdown state assumes no writes - * to the device after it is marked clean, userspace can not make that - * assertion. - * - * CXL_MBOX_OP_[GET_]SCAN_MEDIA: The kernel provides a native error list that - * is kept up to date with patrol notifications and error management. - */ -static u16 cxl_disabled_raw_commands[] = { - CXL_MBOX_OP_ACTIVATE_FW, - CXL_MBOX_OP_SET_PARTITION_INFO, - CXL_MBOX_OP_SET_LSA, - CXL_MBOX_OP_SET_SHUTDOWN_STATE, - CXL_MBOX_OP_SCAN_MEDIA, - CXL_MBOX_OP_GET_SCAN_MEDIA, -}; - -/* - * Command sets that RAW doesn't permit. All opcodes in this set are - * disabled because they pass plain text security payloads over the - * user/kernel boundary. This functionality is intended to be wrapped - * behind the keys ABI which allows for encrypted payloads in the UAPI - */ -static u8 security_command_sets[] = { - 0x44, /* Sanitize */ - 0x45, /* Persistent Memory Data-at-rest Security */ - 0x46, /* Security Passthrough */ -}; - -#define cxl_for_each_cmd(cmd) \ - for ((cmd) = &mem_commands[0]; \ - ((cmd) - mem_commands) < ARRAY_SIZE(mem_commands); (cmd)++) - -#define cxl_cmd_count ARRAY_SIZE(mem_commands) - static int cxl_mem_wait_for_doorbell(struct cxl_mem *cxlm) { const unsigned long start = jiffies; @@ -215,16 +55,6 @@ static int cxl_mem_wait_for_doorbell(struct cxl_mem *cxlm) return 0; } -static bool cxl_is_security_command(u16 opcode) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(security_command_sets); i++) - if (security_command_sets[i] == (opcode >> 8)) - return true; - return false; -} - static void cxl_mem_mbox_timeout(struct cxl_mem *cxlm, struct cxl_mbox_cmd *mbox_cmd) { @@ -446,433 +276,6 @@ static int cxl_pci_mbox_send(struct cxl_mem *cxlm, struct cxl_mbox_cmd *cmd) return rc; } -/** - * handle_mailbox_cmd_from_user() - Dispatch a mailbox command for userspace. - * @cxlm: The CXL memory device to communicate with. - * @cmd: The validated command. - * @in_payload: Pointer to userspace's input payload. - * @out_payload: Pointer to userspace's output payload. - * @size_out: (Input) Max payload size to copy out. - * (Output) Payload size hardware generated. - * @retval: Hardware generated return code from the operation. - * - * Return: - * * %0 - Mailbox transaction succeeded. This implies the mailbox - * protocol completed successfully not that the operation itself - * was successful. - * * %-ENOMEM - Couldn't allocate a bounce buffer. - * * %-EFAULT - Something happened with copy_to/from_user. - * * %-EINTR - Mailbox acquisition interrupted. - * * %-EXXX - Transaction level failures. - * - * Creates the appropriate mailbox command and dispatches it on behalf of a - * userspace request. The input and output payloads are copied between - * userspace. - * - * See cxl_send_cmd(). - */ -static int handle_mailbox_cmd_from_user(struct cxl_mem *cxlm, - const struct cxl_mem_command *cmd, - u64 in_payload, u64 out_payload, - s32 *size_out, u32 *retval) -{ - struct device *dev = cxlm->dev; - struct cxl_mbox_cmd mbox_cmd = { - .opcode = cmd->opcode, - .size_in = cmd->info.size_in, - .size_out = cmd->info.size_out, - }; - int rc; - - if (cmd->info.size_out) { - mbox_cmd.payload_out = kvzalloc(cmd->info.size_out, GFP_KERNEL); - if (!mbox_cmd.payload_out) - return -ENOMEM; - } - - if (cmd->info.size_in) { - mbox_cmd.payload_in = vmemdup_user(u64_to_user_ptr(in_payload), - cmd->info.size_in); - if (IS_ERR(mbox_cmd.payload_in)) { - kvfree(mbox_cmd.payload_out); - return PTR_ERR(mbox_cmd.payload_in); - } - } - - dev_dbg(dev, - "Submitting %s command for user\n" - "\topcode: %x\n" - "\tsize: %ub\n", - cxl_command_names[cmd->info.id].name, mbox_cmd.opcode, - cmd->info.size_in); - - dev_WARN_ONCE(dev, cmd->info.id == CXL_MEM_COMMAND_ID_RAW, - "raw command path used\n"); - - rc = cxlm->mbox_send(cxlm, &mbox_cmd); - if (rc) - goto out; - - /* - * @size_out contains the max size that's allowed to be written back out - * to userspace. While the payload may have written more output than - * this it will have to be ignored. - */ - if (mbox_cmd.size_out) { - dev_WARN_ONCE(dev, mbox_cmd.size_out > *size_out, - "Invalid return size\n"); - if (copy_to_user(u64_to_user_ptr(out_payload), - mbox_cmd.payload_out, mbox_cmd.size_out)) { - rc = -EFAULT; - goto out; - } - } - - *size_out = mbox_cmd.size_out; - *retval = mbox_cmd.return_code; - -out: - kvfree(mbox_cmd.payload_in); - kvfree(mbox_cmd.payload_out); - return rc; -} - -static bool cxl_mem_raw_command_allowed(u16 opcode) -{ - int i; - - if (!IS_ENABLED(CONFIG_CXL_MEM_RAW_COMMANDS)) - return false; - - if (security_locked_down(LOCKDOWN_PCI_ACCESS)) - return false; - - if (cxl_raw_allow_all) - return true; - - if (cxl_is_security_command(opcode)) - return false; - - for (i = 0; i < ARRAY_SIZE(cxl_disabled_raw_commands); i++) - if (cxl_disabled_raw_commands[i] == opcode) - return false; - - return true; -} - -/** - * cxl_validate_cmd_from_user() - Check fields for CXL_MEM_SEND_COMMAND. - * @cxlm: &struct cxl_mem device whose mailbox will be used. - * @send_cmd: &struct cxl_send_command copied in from userspace. - * @out_cmd: Sanitized and populated &struct cxl_mem_command. - * - * Return: - * * %0 - @out_cmd is ready to send. - * * %-ENOTTY - Invalid command specified. - * * %-EINVAL - Reserved fields or invalid values were used. - * * %-ENOMEM - Input or output buffer wasn't sized properly. - * * %-EPERM - Attempted to use a protected command. - * - * The result of this command is a fully validated command in @out_cmd that is - * safe to send to the hardware. - * - * See handle_mailbox_cmd_from_user() - */ -static int cxl_validate_cmd_from_user(struct cxl_mem *cxlm, - const struct cxl_send_command *send_cmd, - struct cxl_mem_command *out_cmd) -{ - const struct cxl_command_info *info; - struct cxl_mem_command *c; - - if (send_cmd->id == 0 || send_cmd->id >= CXL_MEM_COMMAND_ID_MAX) - return -ENOTTY; - - /* - * The user can never specify an input payload larger than what hardware - * supports, but output can be arbitrarily large (simply write out as - * much data as the hardware provides). - */ - if (send_cmd->in.size > cxlm->payload_size) - return -EINVAL; - - /* - * Checks are bypassed for raw commands but a WARN/taint will occur - * later in the callchain - */ - if (send_cmd->id == CXL_MEM_COMMAND_ID_RAW) { - const struct cxl_mem_command temp = { - .info = { - .id = CXL_MEM_COMMAND_ID_RAW, - .flags = 0, - .size_in = send_cmd->in.size, - .size_out = send_cmd->out.size, - }, - .opcode = send_cmd->raw.opcode - }; - - if (send_cmd->raw.rsvd) - return -EINVAL; - - /* - * Unlike supported commands, the output size of RAW commands - * gets passed along without further checking, so it must be - * validated here. - */ - if (send_cmd->out.size > cxlm->payload_size) - return -EINVAL; - - if (!cxl_mem_raw_command_allowed(send_cmd->raw.opcode)) - return -EPERM; - - memcpy(out_cmd, &temp, sizeof(temp)); - - return 0; - } - - if (send_cmd->flags & ~CXL_MEM_COMMAND_FLAG_MASK) - return -EINVAL; - - if (send_cmd->rsvd) - return -EINVAL; - - if (send_cmd->in.rsvd || send_cmd->out.rsvd) - return -EINVAL; - - /* Convert user's command into the internal representation */ - c = &mem_commands[send_cmd->id]; - info = &c->info; - - /* Check that the command is enabled for hardware */ - if (!test_bit(info->id, cxlm->enabled_cmds)) - return -ENOTTY; - - /* Check the input buffer is the expected size */ - if (info->size_in >= 0 && info->size_in != send_cmd->in.size) - return -ENOMEM; - - /* Check the output buffer is at least large enough */ - if (info->size_out >= 0 && send_cmd->out.size < info->size_out) - return -ENOMEM; - - memcpy(out_cmd, c, sizeof(*c)); - out_cmd->info.size_in = send_cmd->in.size; - /* - * XXX: out_cmd->info.size_out will be controlled by the driver, and the - * specified number of bytes @send_cmd->out.size will be copied back out - * to userspace. - */ - - return 0; -} - -static int cxl_query_cmd(struct cxl_memdev *cxlmd, - struct cxl_mem_query_commands __user *q) -{ - struct device *dev = &cxlmd->dev; - struct cxl_mem_command *cmd; - u32 n_commands; - int j = 0; - - dev_dbg(dev, "Query IOCTL\n"); - - if (get_user(n_commands, &q->n_commands)) - return -EFAULT; - - /* returns the total number if 0 elements are requested. */ - if (n_commands == 0) - return put_user(cxl_cmd_count, &q->n_commands); - - /* - * otherwise, return max(n_commands, total commands) cxl_command_info - * structures. - */ - cxl_for_each_cmd(cmd) { - const struct cxl_command_info *info = &cmd->info; - - if (copy_to_user(&q->commands[j++], info, sizeof(*info))) - return -EFAULT; - - if (j == n_commands) - break; - } - - return 0; -} - -static int cxl_send_cmd(struct cxl_memdev *cxlmd, - struct cxl_send_command __user *s) -{ - struct cxl_mem *cxlm = cxlmd->cxlm; - struct device *dev = &cxlmd->dev; - struct cxl_send_command send; - struct cxl_mem_command c; - int rc; - - dev_dbg(dev, "Send IOCTL\n"); - - if (copy_from_user(&send, s, sizeof(send))) - return -EFAULT; - - rc = cxl_validate_cmd_from_user(cxlmd->cxlm, &send, &c); - if (rc) - return rc; - - /* Prepare to handle a full payload for variable sized output */ - if (c.info.size_out < 0) - c.info.size_out = cxlm->payload_size; - - rc = handle_mailbox_cmd_from_user(cxlm, &c, send.in.payload, - send.out.payload, &send.out.size, - &send.retval); - if (rc) - return rc; - - if (copy_to_user(s, &send, sizeof(send))) - return -EFAULT; - - return 0; -} - -static long __cxl_memdev_ioctl(struct cxl_memdev *cxlmd, unsigned int cmd, - unsigned long arg) -{ - switch (cmd) { - case CXL_MEM_QUERY_COMMANDS: - return cxl_query_cmd(cxlmd, (void __user *)arg); - case CXL_MEM_SEND_COMMAND: - return cxl_send_cmd(cxlmd, (void __user *)arg); - default: - return -ENOTTY; - } -} - -static long cxl_memdev_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -{ - struct cxl_memdev *cxlmd = file->private_data; - int rc = -ENXIO; - - down_read(&cxl_memdev_rwsem); - if (cxlmd->cxlm) - rc = __cxl_memdev_ioctl(cxlmd, cmd, arg); - up_read(&cxl_memdev_rwsem); - - return rc; -} - -static int cxl_memdev_open(struct inode *inode, struct file *file) -{ - struct cxl_memdev *cxlmd = - container_of(inode->i_cdev, typeof(*cxlmd), cdev); - - get_device(&cxlmd->dev); - file->private_data = cxlmd; - - return 0; -} - -static int cxl_memdev_release_file(struct inode *inode, struct file *file) -{ - struct cxl_memdev *cxlmd = - container_of(inode->i_cdev, typeof(*cxlmd), cdev); - - put_device(&cxlmd->dev); - - return 0; -} - -static void cxl_memdev_shutdown(struct device *dev) -{ - struct cxl_memdev *cxlmd = to_cxl_memdev(dev); - - down_write(&cxl_memdev_rwsem); - cxlmd->cxlm = NULL; - up_write(&cxl_memdev_rwsem); -} - -static const struct cdevm_file_operations cxl_memdev_fops = { - .fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = cxl_memdev_ioctl, - .open = cxl_memdev_open, - .release = cxl_memdev_release_file, - .compat_ioctl = compat_ptr_ioctl, - .llseek = noop_llseek, - }, - .shutdown = cxl_memdev_shutdown, -}; - -static inline struct cxl_mem_command *cxl_mem_find_command(u16 opcode) -{ - struct cxl_mem_command *c; - - cxl_for_each_cmd(c) - if (c->opcode == opcode) - return c; - - return NULL; -} - -/** - * cxl_mem_mbox_send_cmd() - Send a mailbox command to a memory device. - * @cxlm: The CXL memory device to communicate with. - * @opcode: Opcode for the mailbox command. - * @in: The input payload for the mailbox command. - * @in_size: The length of the input payload - * @out: Caller allocated buffer for the output. - * @out_size: Expected size of output. - * - * Context: Any context. Will acquire and release mbox_mutex. - * Return: - * * %>=0 - Number of bytes returned in @out. - * * %-E2BIG - Payload is too large for hardware. - * * %-EBUSY - Couldn't acquire exclusive mailbox access. - * * %-EFAULT - Hardware error occurred. - * * %-ENXIO - Command completed, but device reported an error. - * * %-EIO - Unexpected output size. - * - * Mailbox commands may execute successfully yet the device itself reported an - * error. While this distinction can be useful for commands from userspace, the - * kernel will only be able to use results when both are successful. - * - * See __cxl_mem_mbox_send_cmd() - */ -static int cxl_mem_mbox_send_cmd(struct cxl_mem *cxlm, u16 opcode, - void *in, size_t in_size, - void *out, size_t out_size) -{ - const struct cxl_mem_command *cmd = cxl_mem_find_command(opcode); - struct cxl_mbox_cmd mbox_cmd = { - .opcode = opcode, - .payload_in = in, - .size_in = in_size, - .size_out = out_size, - .payload_out = out, - }; - int rc; - - if (out_size > cxlm->payload_size) - return -E2BIG; - - rc = cxlm->mbox_send(cxlm, &mbox_cmd); - if (rc) - return rc; - - /* TODO: Map return code to proper kernel style errno */ - if (mbox_cmd.return_code != CXL_MBOX_SUCCESS) - return -ENXIO; - - /* - * Variable sized commands can't be validated and so it's up to the - * caller to do that if they wish. - */ - if (cmd->info.size_out >= 0 && mbox_cmd.size_out != out_size) - return -EIO; - - return 0; -} - static int cxl_mem_setup_mailbox(struct cxl_mem *cxlm) { const int cap = readl(cxlm->regs.mbox + CXLDEV_MBOX_CAPS_OFFSET); @@ -901,30 +304,6 @@ static int cxl_mem_setup_mailbox(struct cxl_mem *cxlm) return 0; } -static struct cxl_mem *cxl_mem_create(struct device *dev) -{ - struct cxl_mem *cxlm; - - cxlm = devm_kzalloc(dev, sizeof(*cxlm), GFP_KERNEL); - if (!cxlm) { - dev_err(dev, "No memory available\n"); - return ERR_PTR(-ENOMEM); - } - - mutex_init(&cxlm->mbox_mutex); - cxlm->dev = dev; - cxlm->enabled_cmds = - devm_kmalloc_array(dev, BITS_TO_LONGS(cxl_cmd_count), - sizeof(unsigned long), - GFP_KERNEL | __GFP_ZERO); - if (!cxlm->enabled_cmds) { - dev_err(dev, "No memory available for bitmap\n"); - return ERR_PTR(-ENOMEM); - } - - return cxlm; -} - static void __iomem *cxl_mem_map_regblock(struct cxl_mem *cxlm, u8 bar, u64 offset) { @@ -1132,298 +511,6 @@ static int cxl_mem_setup_regs(struct cxl_mem *cxlm) return ret; } -static int cxl_xfer_log(struct cxl_mem *cxlm, uuid_t *uuid, u32 size, u8 *out) -{ - u32 remaining = size; - u32 offset = 0; - - while (remaining) { - u32 xfer_size = min_t(u32, remaining, cxlm->payload_size); - struct cxl_mbox_get_log { - uuid_t uuid; - __le32 offset; - __le32 length; - } __packed log = { - .uuid = *uuid, - .offset = cpu_to_le32(offset), - .length = cpu_to_le32(xfer_size) - }; - int rc; - - rc = cxl_mem_mbox_send_cmd(cxlm, CXL_MBOX_OP_GET_LOG, &log, - sizeof(log), out, xfer_size); - if (rc < 0) - return rc; - - out += xfer_size; - remaining -= xfer_size; - offset += xfer_size; - } - - return 0; -} - -/** - * cxl_walk_cel() - Walk through the Command Effects Log. - * @cxlm: Device. - * @size: Length of the Command Effects Log. - * @cel: CEL - * - * Iterate over each entry in the CEL and determine if the driver supports the - * command. If so, the command is enabled for the device and can be used later. - */ -static void cxl_walk_cel(struct cxl_mem *cxlm, size_t size, u8 *cel) -{ - struct cel_entry { - __le16 opcode; - __le16 effect; - } __packed * cel_entry; - const int cel_entries = size / sizeof(*cel_entry); - int i; - - cel_entry = (struct cel_entry *)cel; - - for (i = 0; i < cel_entries; i++) { - u16 opcode = le16_to_cpu(cel_entry[i].opcode); - struct cxl_mem_command *cmd = cxl_mem_find_command(opcode); - - if (!cmd) { - dev_dbg(cxlm->dev, - "Opcode 0x%04x unsupported by driver", opcode); - continue; - } - - set_bit(cmd->info.id, cxlm->enabled_cmds); - } -} - -struct cxl_mbox_get_supported_logs { - __le16 entries; - u8 rsvd[6]; - struct gsl_entry { - uuid_t uuid; - __le32 size; - } __packed entry[]; -} __packed; - -static struct cxl_mbox_get_supported_logs *cxl_get_gsl(struct cxl_mem *cxlm) -{ - struct cxl_mbox_get_supported_logs *ret; - int rc; - - ret = kvmalloc(cxlm->payload_size, GFP_KERNEL); - if (!ret) - return ERR_PTR(-ENOMEM); - - rc = cxl_mem_mbox_send_cmd(cxlm, CXL_MBOX_OP_GET_SUPPORTED_LOGS, NULL, - 0, ret, cxlm->payload_size); - if (rc < 0) { - kvfree(ret); - return ERR_PTR(rc); - } - - return ret; -} - -/** - * cxl_mem_get_partition_info - Get partition info - * @cxlm: cxl_mem instance to update partition info - * - * Retrieve the current partition info for the device specified. If not 0, the - * 'next' values are pending and take affect on next cold reset. - * - * Return: 0 if no error: or the result of the mailbox command. - * - * See CXL @8.2.9.5.2.1 Get Partition Info - */ -static int cxl_mem_get_partition_info(struct cxl_mem *cxlm) -{ - struct cxl_mbox_get_partition_info { - __le64 active_volatile_cap; - __le64 active_persistent_cap; - __le64 next_volatile_cap; - __le64 next_persistent_cap; - } __packed pi; - int rc; - - rc = cxl_mem_mbox_send_cmd(cxlm, CXL_MBOX_OP_GET_PARTITION_INFO, - NULL, 0, &pi, sizeof(pi)); - if (rc) - return rc; - - cxlm->active_volatile_bytes = - le64_to_cpu(pi.active_volatile_cap) * CXL_CAPACITY_MULTIPLIER; - cxlm->active_persistent_bytes = - le64_to_cpu(pi.active_persistent_cap) * CXL_CAPACITY_MULTIPLIER; - cxlm->next_volatile_bytes = - le64_to_cpu(pi.next_volatile_cap) * CXL_CAPACITY_MULTIPLIER; - cxlm->next_persistent_bytes = - le64_to_cpu(pi.next_volatile_cap) * CXL_CAPACITY_MULTIPLIER; - - return 0; -} - -/** - * cxl_mem_enumerate_cmds() - Enumerate commands for a device. - * @cxlm: The device. - * - * Returns 0 if enumerate completed successfully. - * - * CXL devices have optional support for certain commands. This function will - * determine the set of supported commands for the hardware and update the - * enabled_cmds bitmap in the @cxlm. - */ -static int cxl_mem_enumerate_cmds(struct cxl_mem *cxlm) -{ - struct cxl_mbox_get_supported_logs *gsl; - struct device *dev = cxlm->dev; - struct cxl_mem_command *cmd; - int i, rc; - - gsl = cxl_get_gsl(cxlm); - if (IS_ERR(gsl)) - return PTR_ERR(gsl); - - rc = -ENOENT; - for (i = 0; i < le16_to_cpu(gsl->entries); i++) { - u32 size = le32_to_cpu(gsl->entry[i].size); - uuid_t uuid = gsl->entry[i].uuid; - u8 *log; - - dev_dbg(dev, "Found LOG type %pU of size %d", &uuid, size); - - if (!uuid_equal(&uuid, &log_uuid[CEL_UUID])) - continue; - - log = kvmalloc(size, GFP_KERNEL); - if (!log) { - rc = -ENOMEM; - goto out; - } - - rc = cxl_xfer_log(cxlm, &uuid, size, log); - if (rc) { - kvfree(log); - goto out; - } - - cxl_walk_cel(cxlm, size, log); - kvfree(log); - - /* In case CEL was bogus, enable some default commands. */ - cxl_for_each_cmd(cmd) - if (cmd->flags & CXL_CMD_FLAG_FORCE_ENABLE) - set_bit(cmd->info.id, cxlm->enabled_cmds); - - /* Found the required CEL */ - rc = 0; - } - -out: - kvfree(gsl); - return rc; -} - -/** - * cxl_mem_identify() - Send the IDENTIFY command to the device. - * @cxlm: The device to identify. - * - * Return: 0 if identify was executed successfully. - * - * This will dispatch the identify command to the device and on success populate - * structures to be exported to sysfs. - */ -static int cxl_mem_identify(struct cxl_mem *cxlm) -{ - /* See CXL 2.0 Table 175 Identify Memory Device Output Payload */ - struct cxl_mbox_identify { - char fw_revision[0x10]; - __le64 total_capacity; - __le64 volatile_capacity; - __le64 persistent_capacity; - __le64 partition_align; - __le16 info_event_log_size; - __le16 warning_event_log_size; - __le16 failure_event_log_size; - __le16 fatal_event_log_size; - __le32 lsa_size; - u8 poison_list_max_mer[3]; - __le16 inject_poison_limit; - u8 poison_caps; - u8 qos_telemetry_caps; - } __packed id; - int rc; - - rc = cxl_mem_mbox_send_cmd(cxlm, CXL_MBOX_OP_IDENTIFY, NULL, 0, &id, - sizeof(id)); - if (rc < 0) - return rc; - - cxlm->total_bytes = le64_to_cpu(id.total_capacity); - cxlm->total_bytes *= CXL_CAPACITY_MULTIPLIER; - - cxlm->volatile_only_bytes = le64_to_cpu(id.volatile_capacity); - cxlm->volatile_only_bytes *= CXL_CAPACITY_MULTIPLIER; - - cxlm->persistent_only_bytes = le64_to_cpu(id.persistent_capacity); - cxlm->persistent_only_bytes *= CXL_CAPACITY_MULTIPLIER; - - cxlm->partition_align_bytes = le64_to_cpu(id.partition_align); - cxlm->partition_align_bytes *= CXL_CAPACITY_MULTIPLIER; - - dev_dbg(cxlm->dev, - "Identify Memory Device\n" - " total_bytes = %#llx\n" - " volatile_only_bytes = %#llx\n" - " persistent_only_bytes = %#llx\n" - " partition_align_bytes = %#llx\n", - cxlm->total_bytes, cxlm->volatile_only_bytes, - cxlm->persistent_only_bytes, cxlm->partition_align_bytes); - - cxlm->lsa_size = le32_to_cpu(id.lsa_size); - memcpy(cxlm->firmware_version, id.fw_revision, sizeof(id.fw_revision)); - - return 0; -} - -static int cxl_mem_create_range_info(struct cxl_mem *cxlm) -{ - int rc; - - if (cxlm->partition_align_bytes == 0) { - cxlm->ram_range.start = 0; - cxlm->ram_range.end = cxlm->volatile_only_bytes - 1; - cxlm->pmem_range.start = cxlm->volatile_only_bytes; - cxlm->pmem_range.end = cxlm->volatile_only_bytes + - cxlm->persistent_only_bytes - 1; - return 0; - } - - rc = cxl_mem_get_partition_info(cxlm); - if (rc < 0) { - dev_err(cxlm->dev, "Failed to query partition information\n"); - return rc; - } - - dev_dbg(cxlm->dev, - "Get Partition Info\n" - " active_volatile_bytes = %#llx\n" - " active_persistent_bytes = %#llx\n" - " next_volatile_bytes = %#llx\n" - " next_persistent_bytes = %#llx\n", - cxlm->active_volatile_bytes, cxlm->active_persistent_bytes, - cxlm->next_volatile_bytes, cxlm->next_persistent_bytes); - - cxlm->ram_range.start = 0; - cxlm->ram_range.end = cxlm->active_volatile_bytes - 1; - - cxlm->pmem_range.start = cxlm->active_volatile_bytes; - cxlm->pmem_range.end = cxlm->active_volatile_bytes + - cxlm->active_persistent_bytes - 1; - - return 0; -} - static int cxl_mem_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct cxl_memdev *cxlmd; @@ -1458,7 +545,7 @@ static int cxl_mem_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (rc) return rc; - cxlmd = devm_cxl_add_memdev(cxlm, &cxl_memdev_fops); + cxlmd = devm_cxl_add_memdev(cxlm); if (IS_ERR(cxlmd)) return PTR_ERR(cxlmd); @@ -1486,7 +573,6 @@ static struct pci_driver cxl_mem_driver = { static __init int cxl_mem_init(void) { - struct dentry *mbox_debugfs; int rc; /* Double check the anonymous union trickery in struct cxl_regs */ @@ -1497,17 +583,11 @@ static __init int cxl_mem_init(void) if (rc) return rc; - cxl_debugfs = debugfs_create_dir("cxl", NULL); - mbox_debugfs = debugfs_create_dir("mbox", cxl_debugfs); - debugfs_create_bool("raw_allow_all", 0600, mbox_debugfs, - &cxl_raw_allow_all); - return 0; } static __exit void cxl_mem_exit(void) { - debugfs_remove_recursive(cxl_debugfs); pci_unregister_driver(&cxl_mem_driver); } |