diff options
Diffstat (limited to 'drivers/cpufreq')
| -rw-r--r-- | drivers/cpufreq/Kconfig.arm | 44 | ||||
| -rw-r--r-- | drivers/cpufreq/Kconfig.powerpc | 2 | ||||
| -rw-r--r-- | drivers/cpufreq/Makefile | 9 | ||||
| -rw-r--r-- | drivers/cpufreq/exynos-cpufreq.c | 24 | ||||
| -rw-r--r-- | drivers/cpufreq/ppc-corenet-cpufreq.c | 2 | ||||
| -rw-r--r-- | drivers/cpufreq/s3c2416-cpufreq.c | 4 | ||||
| -rw-r--r-- | drivers/cpufreq/s3c24xx-cpufreq.c | 10 |
7 files changed, 60 insertions, 35 deletions
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 0f9a2c3c0e0d..1b06fc4640e2 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -26,13 +26,21 @@ config ARM_VEXPRESS_SPC_CPUFREQ config ARM_EXYNOS_CPUFREQ - bool + tristate "SAMSUNG EXYNOS CPUfreq Driver" + depends on CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250 + depends on THERMAL + help + This adds the CPUFreq driver for Samsung EXYNOS platforms. + Supported SoC versions are: + Exynos4210, Exynos4212, Exynos4412, and Exynos5250. + + If in doubt, say N. config ARM_EXYNOS4210_CPUFREQ bool "SAMSUNG EXYNOS4210" depends on CPU_EXYNOS4210 + depends on ARM_EXYNOS_CPUFREQ default y - select ARM_EXYNOS_CPUFREQ help This adds the CPUFreq driver for Samsung EXYNOS4210 SoC (S5PV310 or S5PC210). @@ -42,8 +50,8 @@ config ARM_EXYNOS4210_CPUFREQ config ARM_EXYNOS4X12_CPUFREQ bool "SAMSUNG EXYNOS4x12" depends on SOC_EXYNOS4212 || SOC_EXYNOS4412 + depends on ARM_EXYNOS_CPUFREQ default y - select ARM_EXYNOS_CPUFREQ help This adds the CPUFreq driver for Samsung EXYNOS4X12 SoC (EXYNOS4212 or EXYNOS4412). @@ -53,28 +61,14 @@ config ARM_EXYNOS4X12_CPUFREQ config ARM_EXYNOS5250_CPUFREQ bool "SAMSUNG EXYNOS5250" depends on SOC_EXYNOS5250 + depends on ARM_EXYNOS_CPUFREQ default y - select ARM_EXYNOS_CPUFREQ help This adds the CPUFreq driver for Samsung EXYNOS5250 SoC. If in doubt, say N. -config ARM_EXYNOS5440_CPUFREQ - bool "SAMSUNG EXYNOS5440" - depends on SOC_EXYNOS5440 - depends on HAVE_CLK && OF - select PM_OPP - default y - help - This adds the CPUFreq driver for Samsung EXYNOS5440 - SoC. The nature of exynos5440 clock controller is - different than previous exynos controllers so not using - the common exynos framework. - - If in doubt, say N. - config ARM_EXYNOS_CPU_FREQ_BOOST_SW bool "EXYNOS Frequency Overclocking - Software" depends on ARM_EXYNOS_CPUFREQ && THERMAL @@ -90,6 +84,20 @@ config ARM_EXYNOS_CPU_FREQ_BOOST_SW If in doubt, say N. +config ARM_EXYNOS5440_CPUFREQ + tristate "SAMSUNG EXYNOS5440" + depends on SOC_EXYNOS5440 + depends on HAVE_CLK && OF + select PM_OPP + default y + help + This adds the CPUFreq driver for Samsung EXYNOS5440 + SoC. The nature of exynos5440 clock controller is + different than previous exynos controllers so not using + the common exynos framework. + + If in doubt, say N. + config ARM_HIGHBANK_CPUFREQ tristate "Calxeda Highbank-based" depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR diff --git a/drivers/cpufreq/Kconfig.powerpc b/drivers/cpufreq/Kconfig.powerpc index 72564b701b4a..7ea24413cee6 100644 --- a/drivers/cpufreq/Kconfig.powerpc +++ b/drivers/cpufreq/Kconfig.powerpc @@ -26,7 +26,7 @@ config CPU_FREQ_MAPLE config PPC_CORENET_CPUFREQ tristate "CPU frequency scaling driver for Freescale E500MC SoCs" depends on PPC_E500MC && OF && COMMON_CLK - select CLK_PPC_CORENET + select CLK_QORIQ help This adds the CPUFreq driver support for Freescale e500mc, e5500 and e6500 series SoCs which are capable of changing diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 8b4220ac888b..82a1821471fd 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -52,10 +52,11 @@ obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o -obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o -obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o -obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o -obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o +obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += arm-exynos-cpufreq.o +arm-exynos-cpufreq-y := exynos-cpufreq.o +arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o +arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o +arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c index f99a0b0b7c06..82d2fbb20f7e 100644 --- a/drivers/cpufreq/exynos-cpufreq.c +++ b/drivers/cpufreq/exynos-cpufreq.c @@ -18,10 +18,13 @@ #include <linux/cpufreq.h> #include <linux/platform_device.h> #include <linux/of.h> +#include <linux/cpu_cooling.h> +#include <linux/cpu.h> #include "exynos-cpufreq.h" static struct exynos_dvfs_info *exynos_info; +static struct thermal_cooling_device *cdev; static struct regulator *arm_regulator; static unsigned int locking_frequency; @@ -156,6 +159,7 @@ static struct cpufreq_driver exynos_driver = { static int exynos_cpufreq_probe(struct platform_device *pdev) { + struct device_node *cpu0; int ret = -EINVAL; exynos_info = kzalloc(sizeof(*exynos_info), GFP_KERNEL); @@ -198,9 +202,27 @@ static int exynos_cpufreq_probe(struct platform_device *pdev) /* Done here as we want to capture boot frequency */ locking_frequency = clk_get_rate(exynos_info->cpu_clk) / 1000; - if (!cpufreq_register_driver(&exynos_driver)) + ret = cpufreq_register_driver(&exynos_driver); + if (ret) + goto err_cpufreq_reg; + + cpu0 = of_get_cpu_node(0, NULL); + if (!cpu0) { + pr_err("failed to find cpu0 node\n"); return 0; + } + + if (of_find_property(cpu0, "#cooling-cells", NULL)) { + cdev = of_cpufreq_cooling_register(cpu0, + cpu_present_mask); + if (IS_ERR(cdev)) + pr_err("running cpufreq without cooling device: %ld\n", + PTR_ERR(cdev)); + } + + return 0; +err_cpufreq_reg: dev_err(&pdev->dev, "failed to register cpufreq driver\n"); regulator_put(arm_regulator); err_vdd_arm: diff --git a/drivers/cpufreq/ppc-corenet-cpufreq.c b/drivers/cpufreq/ppc-corenet-cpufreq.c index bee5df7794d3..7cb4b766cf94 100644 --- a/drivers/cpufreq/ppc-corenet-cpufreq.c +++ b/drivers/cpufreq/ppc-corenet-cpufreq.c @@ -22,6 +22,8 @@ #include <linux/smp.h> #include <sysdev/fsl_soc.h> +#include <asm/smp.h> /* for get_hard_smp_processor_id() in UP configs */ + /** * struct cpu_data - per CPU data struct * @parent: the parent node of cpu clock diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c index 2fd53eaaec20..d6d425773fa4 100644 --- a/drivers/cpufreq/s3c2416-cpufreq.c +++ b/drivers/cpufreq/s3c2416-cpufreq.c @@ -263,7 +263,7 @@ out: } #ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE -static void __init s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq) +static void s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq) { int count, v, i, found; struct cpufreq_frequency_table *pos; @@ -333,7 +333,7 @@ static struct notifier_block s3c2416_cpufreq_reboot_notifier = { .notifier_call = s3c2416_cpufreq_reboot_notifier_evt, }; -static int __init s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy) +static int s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy) { struct s3c2416_data *s3c_freq = &s3c2416_cpufreq; struct cpufreq_frequency_table *pos; diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c index d00f1cee4509..733aa5153e74 100644 --- a/drivers/cpufreq/s3c24xx-cpufreq.c +++ b/drivers/cpufreq/s3c24xx-cpufreq.c @@ -144,11 +144,6 @@ static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg) (cfg->info->set_fvco)(cfg); } -static inline void s3c_cpufreq_resume_clocks(void) -{ - cpu_cur.info->resume_clocks(); -} - static inline void s3c_cpufreq_updateclk(struct clk *clk, unsigned int freq) { @@ -417,9 +412,6 @@ static int s3c_cpufreq_resume(struct cpufreq_policy *policy) last_target = ~0; /* invalidate last_target setting */ - /* first, find out what speed we resumed at. */ - s3c_cpufreq_resume_clocks(); - /* whilst we will be called later on, we try and re-set the * cpu frequencies as soon as possible so that we do not end * up resuming devices and then immediately having to re-set @@ -454,7 +446,7 @@ static struct cpufreq_driver s3c24xx_driver = { }; -int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info) +int s3c_cpufreq_register(struct s3c_cpufreq_info *info) { if (!info || !info->name) { printk(KERN_ERR "%s: failed to pass valid information\n", |