diff options
Diffstat (limited to 'drivers/clocksource')
| -rw-r--r-- | drivers/clocksource/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/clocksource/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clocksource/arm_arch_timer.c | 13 | ||||
| -rw-r--r-- | drivers/clocksource/time-armada-370-xp.c | 55 | ||||
| -rw-r--r-- | drivers/clocksource/timer-atmel-pit.c | 32 | ||||
| -rw-r--r-- | drivers/clocksource/timer-integrator-ap.c | 210 | ||||
| -rw-r--r-- | drivers/clocksource/timer-marco.c | 23 |
7 files changed, 288 insertions, 47 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 90420600e1eb..f657a48d20eb 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -32,6 +32,7 @@ config ARMADA_370_XP_TIMER config MESON6_TIMER bool + select CLKSRC_MMIO config ORION_TIMER select CLKSRC_OF diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 756f6f10efa0..fae0435cc23d 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -45,4 +45,5 @@ obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o obj-$(CONFIG_ARCH_KEYSTONE) += timer-keystone.o +obj-$(CONFIG_ARCH_INTEGRATOR_AP) += timer-integrator-ap.o obj-$(CONFIG_CLKSRC_VERSATILE) += versatile.o diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 43005d4d3348..6a79fc4f900c 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -462,7 +462,10 @@ static void __init arch_counter_register(unsigned type) /* Register the CP15 based counter if we have one */ if (type & ARCH_CP15_TIMER) { - arch_timer_read_counter = arch_counter_get_cntvct; + if (arch_timer_use_virtual) + arch_timer_read_counter = arch_counter_get_cntvct; + else + arch_timer_read_counter = arch_counter_get_cntpct; } else { arch_timer_read_counter = arch_counter_get_cntvct_mem; @@ -702,6 +705,14 @@ static void __init arch_timer_init(struct device_node *np) arch_timer_detect_rate(NULL, np); /* + * If we cannot rely on firmware initializing the timer registers then + * we should use the physical timers instead. + */ + if (IS_ENABLED(CONFIG_ARM) && + of_property_read_bool(np, "arm,cpu-registers-not-fw-configured")) + arch_timer_use_virtual = false; + + /* * If HYP mode is available, we know that the physical timer * has been configured to be accessible from PL1. Use it, so * that a guest can use the virtual timer instead. diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c index 0451e62fac7a..0c8c5e337540 100644 --- a/drivers/clocksource/time-armada-370-xp.c +++ b/drivers/clocksource/time-armada-370-xp.c @@ -43,6 +43,7 @@ #include <linux/module.h> #include <linux/sched_clock.h> #include <linux/percpu.h> +#include <linux/syscore_ops.h> /* * Timer block registers. @@ -223,6 +224,28 @@ static struct notifier_block armada_370_xp_timer_cpu_nb = { .notifier_call = armada_370_xp_timer_cpu_notify, }; +static u32 timer0_ctrl_reg, timer0_local_ctrl_reg; + +static int armada_370_xp_timer_suspend(void) +{ + timer0_ctrl_reg = readl(timer_base + TIMER_CTRL_OFF); + timer0_local_ctrl_reg = readl(local_base + TIMER_CTRL_OFF); + return 0; +} + +static void armada_370_xp_timer_resume(void) +{ + writel(0xffffffff, timer_base + TIMER0_VAL_OFF); + writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF); + writel(timer0_ctrl_reg, timer_base + TIMER_CTRL_OFF); + writel(timer0_local_ctrl_reg, local_base + TIMER_CTRL_OFF); +} + +struct syscore_ops armada_370_xp_timer_syscore_ops = { + .suspend = armada_370_xp_timer_suspend, + .resume = armada_370_xp_timer_resume, +}; + static void __init armada_370_xp_timer_common_init(struct device_node *np) { u32 clr = 0, set = 0; @@ -285,6 +308,8 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np) /* Immediately configure the timer on the boot CPU */ if (!res) armada_370_xp_timer_setup(this_cpu_ptr(armada_370_xp_evt)); + + register_syscore_ops(&armada_370_xp_timer_syscore_ops); } static void __init armada_xp_timer_init(struct device_node *np) @@ -293,6 +318,7 @@ static void __init armada_xp_timer_init(struct device_node *np) /* The 25Mhz fixed clock is mandatory, and must always be available */ BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); timer_clk = clk_get_rate(clk); armada_370_xp_timer_common_init(np); @@ -300,11 +326,40 @@ static void __init armada_xp_timer_init(struct device_node *np) CLOCKSOURCE_OF_DECLARE(armada_xp, "marvell,armada-xp-timer", armada_xp_timer_init); +static void __init armada_375_timer_init(struct device_node *np) +{ + struct clk *clk; + + clk = of_clk_get_by_name(np, "fixed"); + if (!IS_ERR(clk)) { + clk_prepare_enable(clk); + timer_clk = clk_get_rate(clk); + } else { + + /* + * This fallback is required in order to retain proper + * devicetree backwards compatibility. + */ + clk = of_clk_get(np, 0); + + /* Must have at least a clock */ + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); + timer_clk = clk_get_rate(clk) / TIMER_DIVIDER; + timer25Mhz = false; + } + + armada_370_xp_timer_common_init(np); +} +CLOCKSOURCE_OF_DECLARE(armada_375, "marvell,armada-375-timer", + armada_375_timer_init); + static void __init armada_370_timer_init(struct device_node *np) { struct clk *clk = of_clk_get(np, 0); BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); timer_clk = clk_get_rate(clk) / TIMER_DIVIDER; timer25Mhz = false; diff --git a/drivers/clocksource/timer-atmel-pit.c b/drivers/clocksource/timer-atmel-pit.c index d5289098b3df..b5b4d4585c9a 100644 --- a/drivers/clocksource/timer-atmel-pit.c +++ b/drivers/clocksource/timer-atmel-pit.c @@ -262,35 +262,3 @@ static void __init at91sam926x_pit_dt_init(struct device_node *node) } CLOCKSOURCE_OF_DECLARE(at91sam926x_pit, "atmel,at91sam9260-pit", at91sam926x_pit_dt_init); - -static void __iomem *pit_base_addr; - -void __init at91sam926x_pit_init(int irq) -{ - struct pit_data *data; - - data = kzalloc(sizeof(*data), GFP_KERNEL); - if (!data) - panic(pr_fmt("Unable to allocate memory\n")); - - data->base = pit_base_addr; - - data->mck = clk_get(NULL, "mck"); - if (IS_ERR(data->mck)) - panic(pr_fmt("Unable to get mck clk\n")); - - data->irq = irq; - - at91sam926x_pit_common_init(data); -} - -void __init at91sam926x_ioremap_pit(u32 addr) -{ - if (of_have_populated_dt()) - return; - - pit_base_addr = ioremap(addr, 16); - - if (!pit_base_addr) - panic(pr_fmt("Impossible to ioremap PIT\n")); -} diff --git a/drivers/clocksource/timer-integrator-ap.c b/drivers/clocksource/timer-integrator-ap.c new file mode 100644 index 000000000000..b9efd30513d5 --- /dev/null +++ b/drivers/clocksource/timer-integrator-ap.c @@ -0,0 +1,210 @@ +/* + * Integrator/AP timer driver + * Copyright (C) 2000-2003 Deep Blue Solutions Ltd + * Copyright (c) 2014, Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/clk.h> +#include <linux/clocksource.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/sched_clock.h> +#include <asm/hardware/arm_timer.h> + +static void __iomem * sched_clk_base; + +static u64 notrace integrator_read_sched_clock(void) +{ + return -readl(sched_clk_base + TIMER_VALUE); +} + +static void integrator_clocksource_init(unsigned long inrate, + void __iomem *base) +{ + u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; + unsigned long rate = inrate; + + if (rate >= 1500000) { + rate /= 16; + ctrl |= TIMER_CTRL_DIV16; + } + + writel(0xffff, base + TIMER_LOAD); + writel(ctrl, base + TIMER_CTRL); + + clocksource_mmio_init(base + TIMER_VALUE, "timer2", + rate, 200, 16, clocksource_mmio_readl_down); + + sched_clk_base = base; + sched_clock_register(integrator_read_sched_clock, 16, rate); +} + +static unsigned long timer_reload; +static void __iomem * clkevt_base; + +/* + * IRQ handler for the timer + */ +static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + /* clear the interrupt */ + writel(1, clkevt_base + TIMER_INTCLR); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) +{ + u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE; + + /* Disable timer */ + writel(ctrl, clkevt_base + TIMER_CTRL); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + /* Enable the timer and start the periodic tick */ + writel(timer_reload, clkevt_base + TIMER_LOAD); + ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE; + writel(ctrl, clkevt_base + TIMER_CTRL); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* Leave the timer disabled, .set_next_event will enable it */ + ctrl &= ~TIMER_CTRL_PERIODIC; + writel(ctrl, clkevt_base + TIMER_CTRL); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_RESUME: + default: + /* Just leave in disabled state */ + break; + } + +} + +static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt) +{ + unsigned long ctrl = readl(clkevt_base + TIMER_CTRL); + + writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); + writel(next, clkevt_base + TIMER_LOAD); + writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); + + return 0; +} + +static struct clock_event_device integrator_clockevent = { + .name = "timer1", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = clkevt_set_mode, + .set_next_event = clkevt_set_next_event, + .rating = 300, +}; + +static struct irqaction integrator_timer_irq = { + .name = "timer", + .flags = IRQF_TIMER | IRQF_IRQPOLL, + .handler = integrator_timer_interrupt, + .dev_id = &integrator_clockevent, +}; + +static void integrator_clockevent_init(unsigned long inrate, + void __iomem *base, int irq) +{ + unsigned long rate = inrate; + unsigned int ctrl = 0; + + clkevt_base = base; + /* Calculate and program a divisor */ + if (rate > 0x100000 * HZ) { + rate /= 256; + ctrl |= TIMER_CTRL_DIV256; + } else if (rate > 0x10000 * HZ) { + rate /= 16; + ctrl |= TIMER_CTRL_DIV16; + } + timer_reload = rate / HZ; + writel(ctrl, clkevt_base + TIMER_CTRL); + + setup_irq(irq, &integrator_timer_irq); + clockevents_config_and_register(&integrator_clockevent, + rate, + 1, + 0xffffU); +} + +static void __init integrator_ap_timer_init_of(struct device_node *node) +{ + const char *path; + void __iomem *base; + int err; + int irq; + struct clk *clk; + unsigned long rate; + struct device_node *pri_node; + struct device_node *sec_node; + + base = of_io_request_and_map(node, 0, "integrator-timer"); + if (!base) + return; + + clk = of_clk_get(node, 0); + if (IS_ERR(clk)) { + pr_err("No clock for %s\n", node->name); + return; + } + clk_prepare_enable(clk); + rate = clk_get_rate(clk); + writel(0, base + TIMER_CTRL); + + err = of_property_read_string(of_aliases, + "arm,timer-primary", &path); + if (WARN_ON(err)) + return; + pri_node = of_find_node_by_path(path); + err = of_property_read_string(of_aliases, + "arm,timer-secondary", &path); + if (WARN_ON(err)) + return; + sec_node = of_find_node_by_path(path); + + if (node == pri_node) { + /* The primary timer lacks IRQ, use as clocksource */ + integrator_clocksource_init(rate, base); + return; + } + + if (node == sec_node) { + /* The secondary timer will drive the clock event */ + irq = irq_of_parse_and_map(node, 0); + integrator_clockevent_init(rate, base, irq); + return; + } + + pr_info("Timer @%p unused\n", base); + clk_disable_unprepare(clk); +} + +CLOCKSOURCE_OF_DECLARE(integrator_ap_timer, "arm,integrator-timer", + integrator_ap_timer_init_of); diff --git a/drivers/clocksource/timer-marco.c b/drivers/clocksource/timer-marco.c index caf7a2030461..361a789d4bee 100644 --- a/drivers/clocksource/timer-marco.c +++ b/drivers/clocksource/timer-marco.c @@ -20,8 +20,6 @@ #include <linux/of_address.h> #include <linux/sched_clock.h> -#define MARCO_CLOCK_FREQ 1000000 - #define SIRFSOC_TIMER_32COUNTER_0_CTRL 0x0000 #define SIRFSOC_TIMER_32COUNTER_1_CTRL 0x0004 #define SIRFSOC_TIMER_MATCH_0 0x0018 @@ -40,6 +38,8 @@ #define SIRFSOC_TIMER_REG_CNT 6 +static unsigned long marco_timer_rate; + static const u32 sirfsoc_timer_reg_list[SIRFSOC_TIMER_REG_CNT] = { SIRFSOC_TIMER_WATCHDOG_EN, SIRFSOC_TIMER_32COUNTER_0_CTRL, @@ -195,7 +195,7 @@ static int sirfsoc_local_timer_setup(struct clock_event_device *ce) ce->rating = 200; ce->set_mode = sirfsoc_timer_set_mode; ce->set_next_event = sirfsoc_timer_set_next_event; - clockevents_calc_mult_shift(ce, MARCO_CLOCK_FREQ, 60); + clockevents_calc_mult_shift(ce, marco_timer_rate, 60); ce->max_delta_ns = clockevent_delta2ns(-2, ce); ce->min_delta_ns = clockevent_delta2ns(2, ce); ce->cpumask = cpumask_of(cpu); @@ -257,7 +257,6 @@ static void __init sirfsoc_clockevent_init(void) /* initialize the kernel jiffy timer source */ static void __init sirfsoc_marco_timer_init(struct device_node *np) { - unsigned long rate; u32 timer_div; struct clk *clk; @@ -266,16 +265,12 @@ static void __init sirfsoc_marco_timer_init(struct device_node *np) BUG_ON(clk_prepare_enable(clk)); - rate = clk_get_rate(clk); - - BUG_ON(rate < MARCO_CLOCK_FREQ); - BUG_ON(rate % MARCO_CLOCK_FREQ); + marco_timer_rate = clk_get_rate(clk); - /* Initialize the timer dividers */ - timer_div = rate / MARCO_CLOCK_FREQ - 1; - writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); - writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL); - writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_1_CTRL); + /* timer dividers: 0, not divided */ + writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); + writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL); + writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_1_CTRL); /* Initialize timer counters to 0 */ writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_LO); @@ -288,7 +283,7 @@ static void __init sirfsoc_marco_timer_init(struct device_node *np) /* Clear all interrupts */ writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS); - BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, MARCO_CLOCK_FREQ)); + BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, marco_timer_rate)); sirfsoc_clockevent_init(); } |