diff options
Diffstat (limited to 'drivers/clocksource')
| -rw-r--r-- | drivers/clocksource/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/clocksource/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clocksource/h8300_timer8.c | 2 | ||||
| -rw-r--r-- | drivers/clocksource/timer-cadence-ttc.c | 4 | ||||
| -rw-r--r-- | drivers/clocksource/timer-clint.c | 244 | ||||
| -rw-r--r-- | drivers/clocksource/timer-gx6605s.c | 1 | ||||
| -rw-r--r-- | drivers/clocksource/timer-riscv.c | 17 | ||||
| -rw-r--r-- | drivers/clocksource/timer-ti-dm-systimer.c | 44 |
8 files changed, 284 insertions, 41 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 3576ad7bd380..68b087bff59c 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -653,9 +653,8 @@ config ATCPIT100_TIMER This option enables support for the Andestech ATCPIT100 timers. config RISCV_TIMER - bool "Timer for the RISC-V platform" + bool "Timer for the RISC-V platform" if COMPILE_TEST depends on GENERIC_SCHED_CLOCK && RISCV - default y select TIMER_PROBE select TIMER_OF help @@ -663,6 +662,15 @@ config RISCV_TIMER is accessed via both the SBI and the rdcycle instruction. This is required for all RISC-V systems. +config CLINT_TIMER + bool "CLINT Timer for the RISC-V platform" if COMPILE_TEST + depends on GENERIC_SCHED_CLOCK && RISCV + select TIMER_PROBE + select TIMER_OF + help + This option enables the CLINT timer for RISC-V systems. The CLINT + driver is usually used for NoMMU RISC-V systems. + config CSKY_MP_TIMER bool "SMP Timer for the C-SKY platform" if COMPILE_TEST depends on CSKY diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index eaedb7240ae7..1c444cc3bb44 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -89,6 +89,7 @@ obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o obj-$(CONFIG_X86_NUMACHIP) += numachip.o obj-$(CONFIG_ATCPIT100_TIMER) += timer-atcpit100.o obj-$(CONFIG_RISCV_TIMER) += timer-riscv.o +obj-$(CONFIG_CLINT_TIMER) += timer-clint.o obj-$(CONFIG_CSKY_MP_TIMER) += timer-mp-csky.o obj-$(CONFIG_GX6605S_TIMER) += timer-gx6605s.o obj-$(CONFIG_HYPERV_TIMER) += hyperv_timer.o diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c index 1d740a8c42ab..47114c2a7cb5 100644 --- a/drivers/clocksource/h8300_timer8.c +++ b/drivers/clocksource/h8300_timer8.c @@ -169,7 +169,7 @@ static int __init h8300_8timer_init(struct device_node *node) return PTR_ERR(clk); } - ret = ENXIO; + ret = -ENXIO; base = of_iomap(node, 0); if (!base) { pr_err("failed to map registers for clockevent\n"); diff --git a/drivers/clocksource/timer-cadence-ttc.c b/drivers/clocksource/timer-cadence-ttc.c index 38858e141731..80e960602030 100644 --- a/drivers/clocksource/timer-cadence-ttc.c +++ b/drivers/clocksource/timer-cadence-ttc.c @@ -309,7 +309,7 @@ static int ttc_rate_change_clocksource_cb(struct notifier_block *nb, /* restore original register value */ writel_relaxed(ttccs->scale_clk_ctrl_reg_old, ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET); - /* fall through */ + fallthrough; default: return NOTIFY_DONE; } @@ -392,7 +392,7 @@ static int ttc_rate_change_clockevent_cb(struct notifier_block *nb, clockevents_update_freq(&ttcce->ce, ndata->new_rate / PRESCALE); - /* fall through */ + fallthrough; case PRE_RATE_CHANGE: case ABORT_RATE_CHANGE: default: diff --git a/drivers/clocksource/timer-clint.c b/drivers/clocksource/timer-clint.c new file mode 100644 index 000000000000..6cfe2ab73eb0 --- /dev/null +++ b/drivers/clocksource/timer-clint.c @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Western Digital Corporation or its affiliates. + * + * Most of the M-mode (i.e. NoMMU) RISC-V systems usually have a + * CLINT MMIO timer device. + */ + +#define pr_fmt(fmt) "clint: " fmt +#include <linux/bitops.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/cpu.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/sched_clock.h> +#include <linux/io-64-nonatomic-lo-hi.h> +#include <linux/interrupt.h> +#include <linux/of_irq.h> +#include <linux/smp.h> +#include <linux/timex.h> + +#ifndef CONFIG_RISCV_M_MODE +#include <asm/clint.h> +#endif + +#define CLINT_IPI_OFF 0 +#define CLINT_TIMER_CMP_OFF 0x4000 +#define CLINT_TIMER_VAL_OFF 0xbff8 + +/* CLINT manages IPI and Timer for RISC-V M-mode */ +static u32 __iomem *clint_ipi_base; +static u64 __iomem *clint_timer_cmp; +static u64 __iomem *clint_timer_val; +static unsigned long clint_timer_freq; +static unsigned int clint_timer_irq; + +#ifdef CONFIG_RISCV_M_MODE +u64 __iomem *clint_time_val; +EXPORT_SYMBOL(clint_time_val); +#endif + +static void clint_send_ipi(const struct cpumask *target) +{ + unsigned int cpu; + + for_each_cpu(cpu, target) + writel(1, clint_ipi_base + cpuid_to_hartid_map(cpu)); +} + +static void clint_clear_ipi(void) +{ + writel(0, clint_ipi_base + cpuid_to_hartid_map(smp_processor_id())); +} + +static struct riscv_ipi_ops clint_ipi_ops = { + .ipi_inject = clint_send_ipi, + .ipi_clear = clint_clear_ipi, +}; + +#ifdef CONFIG_64BIT +#define clint_get_cycles() readq_relaxed(clint_timer_val) +#else +#define clint_get_cycles() readl_relaxed(clint_timer_val) +#define clint_get_cycles_hi() readl_relaxed(((u32 *)clint_timer_val) + 1) +#endif + +#ifdef CONFIG_64BIT +static u64 notrace clint_get_cycles64(void) +{ + return clint_get_cycles(); +} +#else /* CONFIG_64BIT */ +static u64 notrace clint_get_cycles64(void) +{ + u32 hi, lo; + + do { + hi = clint_get_cycles_hi(); + lo = clint_get_cycles(); + } while (hi != clint_get_cycles_hi()); + + return ((u64)hi << 32) | lo; +} +#endif /* CONFIG_64BIT */ + +static u64 clint_rdtime(struct clocksource *cs) +{ + return clint_get_cycles64(); +} + +static struct clocksource clint_clocksource = { + .name = "clint_clocksource", + .rating = 300, + .mask = CLOCKSOURCE_MASK(64), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .read = clint_rdtime, +}; + +static int clint_clock_next_event(unsigned long delta, + struct clock_event_device *ce) +{ + void __iomem *r = clint_timer_cmp + + cpuid_to_hartid_map(smp_processor_id()); + + csr_set(CSR_IE, IE_TIE); + writeq_relaxed(clint_get_cycles64() + delta, r); + return 0; +} + +static DEFINE_PER_CPU(struct clock_event_device, clint_clock_event) = { + .name = "clint_clockevent", + .features = CLOCK_EVT_FEAT_ONESHOT, + .rating = 100, + .set_next_event = clint_clock_next_event, +}; + +static int clint_timer_starting_cpu(unsigned int cpu) +{ + struct clock_event_device *ce = per_cpu_ptr(&clint_clock_event, cpu); + + ce->cpumask = cpumask_of(cpu); + clockevents_config_and_register(ce, clint_timer_freq, 100, 0x7fffffff); + + enable_percpu_irq(clint_timer_irq, + irq_get_trigger_type(clint_timer_irq)); + return 0; +} + +static int clint_timer_dying_cpu(unsigned int cpu) +{ + disable_percpu_irq(clint_timer_irq); + return 0; +} + +static irqreturn_t clint_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evdev = this_cpu_ptr(&clint_clock_event); + + csr_clear(CSR_IE, IE_TIE); + evdev->event_handler(evdev); + + return IRQ_HANDLED; +} + +static int __init clint_timer_init_dt(struct device_node *np) +{ + int rc; + u32 i, nr_irqs; + void __iomem *base; + struct of_phandle_args oirq; + + /* + * Ensure that CLINT device interrupts are either RV_IRQ_TIMER or + * RV_IRQ_SOFT. If it's anything else then we ignore the device. + */ + nr_irqs = of_irq_count(np); + for (i = 0; i < nr_irqs; i++) { + if (of_irq_parse_one(np, i, &oirq)) { + pr_err("%pOFP: failed to parse irq %d.\n", np, i); + continue; + } + + if ((oirq.args_count != 1) || + (oirq.args[0] != RV_IRQ_TIMER && + oirq.args[0] != RV_IRQ_SOFT)) { + pr_err("%pOFP: invalid irq %d (hwirq %d)\n", + np, i, oirq.args[0]); + return -ENODEV; + } + + /* Find parent irq domain and map timer irq */ + if (!clint_timer_irq && + oirq.args[0] == RV_IRQ_TIMER && + irq_find_host(oirq.np)) + clint_timer_irq = irq_of_parse_and_map(np, i); + } + + /* If CLINT timer irq not found then fail */ + if (!clint_timer_irq) { + pr_err("%pOFP: timer irq not found\n", np); + return -ENODEV; + } + + base = of_iomap(np, 0); + if (!base) { + pr_err("%pOFP: could not map registers\n", np); + return -ENODEV; + } + + clint_ipi_base = base + CLINT_IPI_OFF; + clint_timer_cmp = base + CLINT_TIMER_CMP_OFF; + clint_timer_val = base + CLINT_TIMER_VAL_OFF; + clint_timer_freq = riscv_timebase; + +#ifdef CONFIG_RISCV_M_MODE + /* + * Yes, that's an odd naming scheme. time_val is public, but hopefully + * will die in favor of something cleaner. + */ + clint_time_val = clint_timer_val; +#endif + + pr_info("%pOFP: timer running at %ld Hz\n", np, clint_timer_freq); + + rc = clocksource_register_hz(&clint_clocksource, clint_timer_freq); + if (rc) { + pr_err("%pOFP: clocksource register failed [%d]\n", np, rc); + goto fail_iounmap; + } + + sched_clock_register(clint_get_cycles64, 64, clint_timer_freq); + + rc = request_percpu_irq(clint_timer_irq, clint_timer_interrupt, + "clint-timer", &clint_clock_event); + if (rc) { + pr_err("registering percpu irq failed [%d]\n", rc); + goto fail_iounmap; + } + + rc = cpuhp_setup_state(CPUHP_AP_CLINT_TIMER_STARTING, + "clockevents/clint/timer:starting", + clint_timer_starting_cpu, + clint_timer_dying_cpu); + if (rc) { + pr_err("%pOFP: cpuhp setup state failed [%d]\n", np, rc); + goto fail_free_irq; + } + + riscv_set_ipi_ops(&clint_ipi_ops); + clint_clear_ipi(); + + return 0; + +fail_free_irq: + free_irq(clint_timer_irq, &clint_clock_event); +fail_iounmap: + iounmap(base); + return rc; +} + +TIMER_OF_DECLARE(clint_timer, "riscv,clint0", clint_timer_init_dt); +TIMER_OF_DECLARE(clint_timer1, "sifive,clint0", clint_timer_init_dt); diff --git a/drivers/clocksource/timer-gx6605s.c b/drivers/clocksource/timer-gx6605s.c index 80d0939d040b..8d386adbe800 100644 --- a/drivers/clocksource/timer-gx6605s.c +++ b/drivers/clocksource/timer-gx6605s.c @@ -28,6 +28,7 @@ static irqreturn_t gx6605s_timer_interrupt(int irq, void *dev) void __iomem *base = timer_of_base(to_timer_of(ce)); writel_relaxed(GX6605S_STATUS_CLR, base + TIMER_STATUS); + writel_relaxed(0, base + TIMER_INI); ce->event_handler(ce); diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c index 9de1dabfb126..c51c5ed15aa7 100644 --- a/drivers/clocksource/timer-riscv.c +++ b/drivers/clocksource/timer-riscv.c @@ -19,26 +19,13 @@ #include <linux/of_irq.h> #include <asm/smp.h> #include <asm/sbi.h> - -u64 __iomem *riscv_time_cmp; -u64 __iomem *riscv_time_val; - -static inline void mmio_set_timer(u64 val) -{ - void __iomem *r; - - r = riscv_time_cmp + cpuid_to_hartid_map(smp_processor_id()); - writeq_relaxed(val, r); -} +#include <asm/timex.h> static int riscv_clock_next_event(unsigned long delta, struct clock_event_device *ce) { csr_set(CSR_IE, IE_TIE); - if (IS_ENABLED(CONFIG_RISCV_SBI)) - sbi_set_timer(get_cycles64() + delta); - else - mmio_set_timer(get_cycles64() + delta); + sbi_set_timer(get_cycles64() + delta); return 0; } diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c index f6fd1c1cc527..33b3e8aa2cc5 100644 --- a/drivers/clocksource/timer-ti-dm-systimer.c +++ b/drivers/clocksource/timer-ti-dm-systimer.c @@ -69,12 +69,33 @@ static bool dmtimer_systimer_revision1(struct dmtimer_systimer *t) return !(tidr >> 16); } +static void dmtimer_systimer_enable(struct dmtimer_systimer *t) +{ + u32 val; + + if (dmtimer_systimer_revision1(t)) + val = DMTIMER_TYPE1_ENABLE; + else + val = DMTIMER_TYPE2_ENABLE; + + writel_relaxed(val, t->base + t->sysc); +} + +static void dmtimer_systimer_disable(struct dmtimer_systimer *t) +{ + if (!dmtimer_systimer_revision1(t)) + return; + + writel_relaxed(DMTIMER_TYPE1_DISABLE, t->base + t->sysc); +} + static int __init dmtimer_systimer_type1_reset(struct dmtimer_systimer *t) { void __iomem *syss = t->base + OMAP_TIMER_V1_SYS_STAT_OFFSET; int ret; u32 l; + dmtimer_systimer_enable(t); writel_relaxed(BIT(1) | BIT(2), t->base + t->ifctrl); ret = readl_poll_timeout_atomic(syss, l, l & BIT(0), 100, DMTIMER_RESET_WAIT); @@ -88,6 +109,7 @@ static int __init dmtimer_systimer_type2_reset(struct dmtimer_systimer *t) void __iomem *sysc = t->base + t->sysc; u32 l; + dmtimer_systimer_enable(t); l = readl_relaxed(sysc); l |= BIT(0); writel_relaxed(l, sysc); @@ -336,26 +358,6 @@ static int __init dmtimer_systimer_init_clock(struct dmtimer_systimer *t, return 0; } -static void dmtimer_systimer_enable(struct dmtimer_systimer *t) -{ - u32 val; - - if (dmtimer_systimer_revision1(t)) - val = DMTIMER_TYPE1_ENABLE; - else - val = DMTIMER_TYPE2_ENABLE; - - writel_relaxed(val, t->base + t->sysc); -} - -static void dmtimer_systimer_disable(struct dmtimer_systimer *t) -{ - if (!dmtimer_systimer_revision1(t)) - return; - - writel_relaxed(DMTIMER_TYPE1_DISABLE, t->base + t->sysc); -} - static int __init dmtimer_systimer_setup(struct device_node *np, struct dmtimer_systimer *t) { @@ -409,8 +411,8 @@ static int __init dmtimer_systimer_setup(struct device_node *np, t->wakeup = regbase + _OMAP_TIMER_WAKEUP_EN_OFFSET; t->ifctrl = regbase + _OMAP_TIMER_IF_CTRL_OFFSET; - dmtimer_systimer_enable(t); dmtimer_systimer_reset(t); + dmtimer_systimer_enable(t); pr_debug("dmtimer rev %08x sysc %08x\n", readl_relaxed(t->base), readl_relaxed(t->base + t->sysc)); |