1 files changed, 118 insertions, 0 deletions
diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
new file mode 100644
index 000000000000..431892200a08
--- /dev/null
+++ b/drivers/clocksource/timer-riscv.c
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Regents of the University of California
+ * Copyright (C) 2017 SiFive
+ */
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/sched_clock.h>
+#include <asm/smp.h>
+#include <asm/sbi.h>
+
+/*
+ * All RISC-V systems have a timer attached to every hart.  These timers can be
+ * read by the 'rdcycle' pseudo instruction, and can use the SBI to setup
+ * events.  In order to abstract the architecture-specific timer reading and
+ * setting functions away from the clock event insertion code, we provide
+ * function pointers to the clockevent subsystem that perform two basic
+ * operations: rdtime() reads the timer on the current CPU, and
+ * next_event(delta) sets the next timer event to 'delta' cycles in the future.
+ * As the timers are inherently a per-cpu resource, these callbacks perform
+ * operations on the current hart.  There is guaranteed to be exactly one timer
+ * per hart on all RISC-V systems.
+ */
+
+static int riscv_clock_next_event(unsigned long delta,
+		struct clock_event_device *ce)
+{
+	csr_set(sie, SIE_STIE);
+	sbi_set_timer(get_cycles64() + delta);
+	return 0;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, riscv_clock_event) = {
+	.name			= "riscv_timer_clockevent",
+	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 100,
+	.set_next_event		= riscv_clock_next_event,
+};
+
+/*
+ * It is guaranteed that all the timers across all the harts are synchronized
+ * within one tick of each other, so while this could technically go
+ * backwards when hopping between CPUs, practically it won't happen.
+ */
+static unsigned long long riscv_clocksource_rdtime(struct clocksource *cs)
+{
+	return get_cycles64();
+}
+
+static u64 riscv_sched_clock(void)
+{
+	return get_cycles64();
+}
+
+static DEFINE_PER_CPU(struct clocksource, riscv_clocksource) = {
+	.name		= "riscv_clocksource",
+	.rating		= 300,
+	.mask		= CLOCKSOURCE_MASK(BITS_PER_LONG),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+	.read		= riscv_clocksource_rdtime,
+};
+
+static int riscv_timer_starting_cpu(unsigned int cpu)
+{
+	struct clock_event_device *ce = per_cpu_ptr(&riscv_clock_event, cpu);
+
+	ce->cpumask = cpumask_of(cpu);
+	clockevents_config_and_register(ce, riscv_timebase, 100, 0x7fffffff);
+
+	csr_set(sie, SIE_STIE);
+	return 0;
+}
+
+static int riscv_timer_dying_cpu(unsigned int cpu)
+{
+	csr_clear(sie, SIE_STIE);
+	return 0;
+}
+
+/* called directly from the low-level interrupt handler */
+void riscv_timer_interrupt(void)
+{
+	struct clock_event_device *evdev = this_cpu_ptr(&riscv_clock_event);
+
+	csr_clear(sie, SIE_STIE);
+	evdev->event_handler(evdev);
+}
+
+static int __init riscv_timer_init_dt(struct device_node *n)
+{
+	int cpuid, hartid, error;
+	struct clocksource *cs;
+
+	hartid = riscv_of_processor_hartid(n);
+	cpuid = riscv_hartid_to_cpuid(hartid);
+
+	if (cpuid != smp_processor_id())
+		return 0;
+
+	cs = per_cpu_ptr(&riscv_clocksource, cpuid);
+	clocksource_register_hz(cs, riscv_timebase);
+
+	sched_clock_register(riscv_sched_clock,
+			BITS_PER_LONG, riscv_timebase);
+
+	error = cpuhp_setup_state(CPUHP_AP_RISCV_TIMER_STARTING,
+			 "clockevents/riscv/timer:starting",
+			 riscv_timer_starting_cpu, riscv_timer_dying_cpu);
+	if (error)
+		pr_err("RISCV timer register failed [%d] for cpu = [%d]\n",
+		       error, cpuid);
+	return error;
+}
+
+TIMER_OF_DECLARE(riscv_timer, "riscv", riscv_timer_init_dt);