diff options
Diffstat (limited to 'drivers/clk/tegra')
| -rw-r--r-- | drivers/clk/tegra/clk-dfll.c | 114 | ||||
| -rw-r--r-- | drivers/clk/tegra/clk-emc.c | 4 | ||||
| -rw-r--r-- | drivers/clk/tegra/clk-tegra-audio.c | 25 | ||||
| -rw-r--r-- | drivers/clk/tegra/clk-tegra114.c | 8 | ||||
| -rw-r--r-- | drivers/clk/tegra/clk-tegra124.c | 8 | ||||
| -rw-r--r-- | drivers/clk/tegra/clk-tegra30.c | 8 | ||||
| -rw-r--r-- | drivers/clk/tegra/clk.h | 106 | ||||
| -rw-r--r-- | drivers/clk/tegra/cvb.c | 7 |
8 files changed, 164 insertions, 116 deletions
diff --git a/drivers/clk/tegra/clk-dfll.c b/drivers/clk/tegra/clk-dfll.c index c4e3a52e225b..86a307b17eb0 100644 --- a/drivers/clk/tegra/clk-dfll.c +++ b/drivers/clk/tegra/clk-dfll.c @@ -469,56 +469,6 @@ static unsigned long dfll_scale_dvco_rate(int scale_bits, } /* - * Monitor control - */ - -/** - * dfll_calc_monitored_rate - convert DFLL_MONITOR_DATA_VAL rate into real freq - * @monitor_data: value read from the DFLL_MONITOR_DATA_VAL bitfield - * @ref_rate: DFLL reference clock rate - * - * Convert @monitor_data from DFLL_MONITOR_DATA_VAL units into cycles - * per second. Returns the converted value. - */ -static u64 dfll_calc_monitored_rate(u32 monitor_data, - unsigned long ref_rate) -{ - return monitor_data * (ref_rate / REF_CLK_CYC_PER_DVCO_SAMPLE); -} - -/** - * dfll_read_monitor_rate - return the DFLL's output rate from internal monitor - * @td: DFLL instance - * - * If the DFLL is enabled, return the last rate reported by the DFLL's - * internal monitoring hardware. This works in both open-loop and - * closed-loop mode, and takes the output scaler setting into account. - * Assumes that the monitor was programmed to monitor frequency before - * the sample period started. If the driver believes that the DFLL is - * currently uninitialized or disabled, it will return 0, since - * otherwise the DFLL monitor data register will return the last - * measured rate from when the DFLL was active. - */ -static u64 dfll_read_monitor_rate(struct tegra_dfll *td) -{ - u32 v, s; - u64 pre_scaler_rate, post_scaler_rate; - - if (!dfll_is_running(td)) - return 0; - - v = dfll_readl(td, DFLL_MONITOR_DATA); - v = (v & DFLL_MONITOR_DATA_VAL_MASK) >> DFLL_MONITOR_DATA_VAL_SHIFT; - pre_scaler_rate = dfll_calc_monitored_rate(v, td->ref_rate); - - s = dfll_readl(td, DFLL_FREQ_REQ); - s = (s & DFLL_FREQ_REQ_SCALE_MASK) >> DFLL_FREQ_REQ_SCALE_SHIFT; - post_scaler_rate = dfll_scale_dvco_rate(s, pre_scaler_rate); - - return post_scaler_rate; -} - -/* * DFLL mode switching */ @@ -1006,24 +956,25 @@ static unsigned long dfll_clk_recalc_rate(struct clk_hw *hw, return td->last_unrounded_rate; } -static long dfll_clk_round_rate(struct clk_hw *hw, - unsigned long rate, - unsigned long *parent_rate) +/* Must use determine_rate since it allows for rates exceeding 2^31-1 */ +static int dfll_clk_determine_rate(struct clk_hw *hw, + struct clk_rate_request *clk_req) { struct tegra_dfll *td = clk_hw_to_dfll(hw); struct dfll_rate_req req; int ret; - ret = dfll_calculate_rate_request(td, &req, rate); + ret = dfll_calculate_rate_request(td, &req, clk_req->rate); if (ret) return ret; /* - * Don't return the rounded rate, since it doesn't really matter as + * Don't set the rounded rate, since it doesn't really matter as * the output rate will be voltage controlled anyway, and cpufreq * freaks out if any rounding happens. */ - return rate; + + return 0; } static int dfll_clk_set_rate(struct clk_hw *hw, unsigned long rate, @@ -1039,7 +990,7 @@ static const struct clk_ops dfll_clk_ops = { .enable = dfll_clk_enable, .disable = dfll_clk_disable, .recalc_rate = dfll_clk_recalc_rate, - .round_rate = dfll_clk_round_rate, + .determine_rate = dfll_clk_determine_rate, .set_rate = dfll_clk_set_rate, }; @@ -1101,6 +1052,55 @@ static void dfll_unregister_clk(struct tegra_dfll *td) */ #ifdef CONFIG_DEBUG_FS +/* + * Monitor control + */ + +/** + * dfll_calc_monitored_rate - convert DFLL_MONITOR_DATA_VAL rate into real freq + * @monitor_data: value read from the DFLL_MONITOR_DATA_VAL bitfield + * @ref_rate: DFLL reference clock rate + * + * Convert @monitor_data from DFLL_MONITOR_DATA_VAL units into cycles + * per second. Returns the converted value. + */ +static u64 dfll_calc_monitored_rate(u32 monitor_data, + unsigned long ref_rate) +{ + return monitor_data * (ref_rate / REF_CLK_CYC_PER_DVCO_SAMPLE); +} + +/** + * dfll_read_monitor_rate - return the DFLL's output rate from internal monitor + * @td: DFLL instance + * + * If the DFLL is enabled, return the last rate reported by the DFLL's + * internal monitoring hardware. This works in both open-loop and + * closed-loop mode, and takes the output scaler setting into account. + * Assumes that the monitor was programmed to monitor frequency before + * the sample period started. If the driver believes that the DFLL is + * currently uninitialized or disabled, it will return 0, since + * otherwise the DFLL monitor data register will return the last + * measured rate from when the DFLL was active. + */ +static u64 dfll_read_monitor_rate(struct tegra_dfll *td) +{ + u32 v, s; + u64 pre_scaler_rate, post_scaler_rate; + + if (!dfll_is_running(td)) + return 0; + + v = dfll_readl(td, DFLL_MONITOR_DATA); + v = (v & DFLL_MONITOR_DATA_VAL_MASK) >> DFLL_MONITOR_DATA_VAL_SHIFT; + pre_scaler_rate = dfll_calc_monitored_rate(v, td->ref_rate); + + s = dfll_readl(td, DFLL_FREQ_REQ); + s = (s & DFLL_FREQ_REQ_SCALE_MASK) >> DFLL_FREQ_REQ_SCALE_SHIFT; + post_scaler_rate = dfll_scale_dvco_rate(s, pre_scaler_rate); + + return post_scaler_rate; +} static int attr_enable_get(void *data, u64 *val) { diff --git a/drivers/clk/tegra/clk-emc.c b/drivers/clk/tegra/clk-emc.c index 138a94b99b5b..e1fe8f35d45c 100644 --- a/drivers/clk/tegra/clk-emc.c +++ b/drivers/clk/tegra/clk-emc.c @@ -491,10 +491,8 @@ struct clk *tegra_clk_register_emc(void __iomem *base, struct device_node *np, for_each_child_of_node(np, node) { err = of_property_read_u32(node, "nvidia,ram-code", &node_ram_code); - if (err) { - of_node_put(node); + if (err) continue; - } /* * Store timings for all ram codes as we cannot read the diff --git a/drivers/clk/tegra/clk-tegra-audio.c b/drivers/clk/tegra/clk-tegra-audio.c index 11e3ad7ad7a3..e2bfa9b368f6 100644 --- a/drivers/clk/tegra/clk-tegra-audio.c +++ b/drivers/clk/tegra/clk-tegra-audio.c @@ -125,18 +125,29 @@ static struct tegra_audio2x_clk_initdata audio2x_clks[] = { void __init tegra_audio_clk_init(void __iomem *clk_base, void __iomem *pmc_base, struct tegra_clk *tegra_clks, - struct tegra_clk_pll_params *pll_a_params) + struct tegra_audio_clk_info *audio_info, + unsigned int num_plls) { struct clk *clk; struct clk **dt_clk; int i; - /* PLLA */ - dt_clk = tegra_lookup_dt_id(tegra_clk_pll_a, tegra_clks); - if (dt_clk) { - clk = tegra_clk_register_pll("pll_a", "pll_p_out1", clk_base, - pmc_base, 0, pll_a_params, NULL); - *dt_clk = clk; + if (!audio_info || num_plls < 1) { + pr_err("No audio data passed to tegra_audio_clk_init\n"); + WARN_ON(1); + return; + } + + for (i = 0; i < num_plls; i++) { + struct tegra_audio_clk_info *info = &audio_info[i]; + + dt_clk = tegra_lookup_dt_id(info->clk_id, tegra_clks); + if (dt_clk) { + clk = tegra_clk_register_pll(info->name, info->parent, + clk_base, pmc_base, 0, info->pll_params, + NULL); + *dt_clk = clk; + } } /* PLLA_OUT0 */ diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c index db5871519bf5..b7d03e9add97 100644 --- a/drivers/clk/tegra/clk-tegra114.c +++ b/drivers/clk/tegra/clk-tegra114.c @@ -933,6 +933,10 @@ static u32 mux_pllm_pllc2_c_c3_pllp_plla_idx[] = { [0] = 0, [1] = 1, [2] = 2, [3] = 3, [4] = 4, [5] = 6, }; +static struct tegra_audio_clk_info tegra114_audio_plls[] = { + { "pll_a", &pll_a_params, tegra_clk_pll_a, "pll_p_out1" }, +}; + static struct clk **clks; static unsigned long osc_freq; @@ -1481,7 +1485,9 @@ static void __init tegra114_clock_init(struct device_node *np) tegra114_fixed_clk_init(clk_base); tegra114_pll_init(clk_base, pmc_base); tegra114_periph_clk_init(clk_base, pmc_base); - tegra_audio_clk_init(clk_base, pmc_base, tegra114_clks, &pll_a_params); + tegra_audio_clk_init(clk_base, pmc_base, tegra114_clks, + tegra114_audio_plls, + ARRAY_SIZE(tegra114_audio_plls)); tegra_pmc_clk_init(pmc_base, tegra114_clks); tegra_super_clk_gen4_init(clk_base, pmc_base, tegra114_clks, &pll_x_params); diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c index 824d75883d2b..87975f7adddc 100644 --- a/drivers/clk/tegra/clk-tegra124.c +++ b/drivers/clk/tegra/clk-tegra124.c @@ -1417,6 +1417,10 @@ static struct tegra_clk_init_table tegra132_init_table[] __initdata = { {TEGRA124_CLK_CLK_MAX, TEGRA124_CLK_CLK_MAX, 0, 0}, }; +static struct tegra_audio_clk_info tegra124_audio_plls[] = { + { "pll_a", &pll_a_params, tegra_clk_pll_a, "pll_p_out1" }, +}; + /** * tegra124_clock_apply_init_table - initialize clocks on Tegra124 SoCs * @@ -1555,7 +1559,9 @@ static void __init tegra124_132_clock_init_pre(struct device_node *np) tegra_fixed_clk_init(tegra124_clks); tegra124_pll_init(clk_base, pmc_base); tegra124_periph_clk_init(clk_base, pmc_base); - tegra_audio_clk_init(clk_base, pmc_base, tegra124_clks, &pll_a_params); + tegra_audio_clk_init(clk_base, pmc_base, tegra124_clks, + tegra124_audio_plls, + ARRAY_SIZE(tegra124_audio_plls)); tegra_pmc_clk_init(pmc_base, tegra124_clks); /* For Tegra124 & Tegra132, PLLD is the only source for DSIA & DSIB */ diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c index fad561a5896b..b90db615c29e 100644 --- a/drivers/clk/tegra/clk-tegra30.c +++ b/drivers/clk/tegra/clk-tegra30.c @@ -1405,6 +1405,10 @@ static const struct of_device_id pmc_match[] __initconst = { {}, }; +static struct tegra_audio_clk_info tegra30_audio_plls[] = { + { "pll_a", &pll_a_params, tegra_clk_pll_a, "pll_p_out1" }, +}; + static void __init tegra30_clock_init(struct device_node *np) { struct device_node *node; @@ -1442,7 +1446,9 @@ static void __init tegra30_clock_init(struct device_node *np) tegra30_pll_init(); tegra30_super_clk_init(); tegra30_periph_clk_init(); - tegra_audio_clk_init(clk_base, pmc_base, tegra30_clks, &pll_a_params); + tegra_audio_clk_init(clk_base, pmc_base, tegra30_clks, + tegra30_audio_plls, + ARRAY_SIZE(tegra30_audio_plls)); tegra_pmc_clk_init(pmc_base, tegra30_clks); tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA30_CLK_CLK_MAX); diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h index 0621887e06f7..5d2678914160 100644 --- a/drivers/clk/tegra/clk.h +++ b/drivers/clk/tegra/clk.h @@ -157,7 +157,7 @@ struct div_nmp { }; /** - * struct clk_pll_params - PLL parameters + * struct tegra_clk_pll_params - PLL parameters * * @input_min: Minimum input frequency * @input_max: Maximum input frequency @@ -168,9 +168,45 @@ struct div_nmp { * @base_reg: PLL base reg offset * @misc_reg: PLL misc reg offset * @lock_reg: PLL lock reg offset - * @lock_bit_idx: Bit index for PLL lock status + * @lock_mask: Bitmask for PLL lock status * @lock_enable_bit_idx: Bit index to enable PLL lock + * @iddq_reg: PLL IDDQ register offset + * @iddq_bit_idx: Bit index to enable PLL IDDQ + * @aux_reg: AUX register offset + * @dyn_ramp_reg: Dynamic ramp control register offset + * @ext_misc_reg: Miscellaneous control register offsets + * @pmc_divnm_reg: n, m divider PMC override register offset (PLLM) + * @pmc_divp_reg: p divider PMC override register offset (PLLM) + * @flags: PLL flags + * @stepa_shift: Dynamic ramp step A field shift + * @stepb_shift: Dynamic ramp step B field shift * @lock_delay: Delay in us if PLL lock is not used + * @max_p: maximum value for the p divider + * @pdiv_tohw: mapping of p divider to register values + * @div_nmp: offsets and widths on n, m and p fields + * @freq_table: array of frequencies supported by PLL + * @fixed_rate: PLL rate if it is fixed + * + * Flags: + * TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for + * PLL locking. If not set it will use lock_delay value to wait. + * TEGRA_PLL_HAS_CPCON - This flag indicates that CPCON value needs + * to be programmed to change output frequency of the PLL. + * TEGRA_PLL_SET_LFCON - This flag indicates that LFCON value needs + * to be programmed to change output frequency of the PLL. + * TEGRA_PLL_SET_DCCON - This flag indicates that DCCON value needs + * to be programmed to change output frequency of the PLL. + * TEGRA_PLLU - PLLU has inverted post divider. This flags indicated + * that it is PLLU and invert post divider value. + * TEGRA_PLLM - PLLM has additional override settings in PMC. This + * flag indicates that it is PLLM and use override settings. + * TEGRA_PLL_FIXED - We are not supposed to change output frequency + * of some plls. + * TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling. + * TEGRA_PLL_LOCK_MISC - Lock bit is in the misc register instead of the + * base register. + * TEGRA_PLL_BYPASS - PLL has bypass bit + * TEGRA_PLL_HAS_LOCK_ENABLE - PLL has bit to enable lock monitoring */ struct tegra_clk_pll_params { unsigned long input_min; @@ -203,38 +239,26 @@ struct tegra_clk_pll_params { unsigned long fixed_rate; }; +#define TEGRA_PLL_USE_LOCK BIT(0) +#define TEGRA_PLL_HAS_CPCON BIT(1) +#define TEGRA_PLL_SET_LFCON BIT(2) +#define TEGRA_PLL_SET_DCCON BIT(3) +#define TEGRA_PLLU BIT(4) +#define TEGRA_PLLM BIT(5) +#define TEGRA_PLL_FIXED BIT(6) +#define TEGRA_PLLE_CONFIGURE BIT(7) +#define TEGRA_PLL_LOCK_MISC BIT(8) +#define TEGRA_PLL_BYPASS BIT(9) +#define TEGRA_PLL_HAS_LOCK_ENABLE BIT(10) + /** * struct tegra_clk_pll - Tegra PLL clock * * @hw: handle between common and hardware-specifix interfaces * @clk_base: address of CAR controller * @pmc: address of PMC, required to read override bits - * @freq_table: array of frequencies supported by PLL - * @params: PLL parameters - * @flags: PLL flags - * @fixed_rate: PLL rate if it is fixed * @lock: register lock - * - * Flags: - * TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for - * PLL locking. If not set it will use lock_delay value to wait. - * TEGRA_PLL_HAS_CPCON - This flag indicates that CPCON value needs - * to be programmed to change output frequency of the PLL. - * TEGRA_PLL_SET_LFCON - This flag indicates that LFCON value needs - * to be programmed to change output frequency of the PLL. - * TEGRA_PLL_SET_DCCON - This flag indicates that DCCON value needs - * to be programmed to change output frequency of the PLL. - * TEGRA_PLLU - PLLU has inverted post divider. This flags indicated - * that it is PLLU and invert post divider value. - * TEGRA_PLLM - PLLM has additional override settings in PMC. This - * flag indicates that it is PLLM and use override settings. - * TEGRA_PLL_FIXED - We are not supposed to change output frequency - * of some plls. - * TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling. - * TEGRA_PLL_LOCK_MISC - Lock bit is in the misc register instead of the - * base register. - * TEGRA_PLL_BYPASS - PLL has bypass bit - * TEGRA_PLL_HAS_LOCK_ENABLE - PLL has bit to enable lock monitoring + * @params: PLL parameters */ struct tegra_clk_pll { struct clk_hw hw; @@ -246,17 +270,20 @@ struct tegra_clk_pll { #define to_clk_pll(_hw) container_of(_hw, struct tegra_clk_pll, hw) -#define TEGRA_PLL_USE_LOCK BIT(0) -#define TEGRA_PLL_HAS_CPCON BIT(1) -#define TEGRA_PLL_SET_LFCON BIT(2) -#define TEGRA_PLL_SET_DCCON BIT(3) -#define TEGRA_PLLU BIT(4) -#define TEGRA_PLLM BIT(5) -#define TEGRA_PLL_FIXED BIT(6) -#define TEGRA_PLLE_CONFIGURE BIT(7) -#define TEGRA_PLL_LOCK_MISC BIT(8) -#define TEGRA_PLL_BYPASS BIT(9) -#define TEGRA_PLL_HAS_LOCK_ENABLE BIT(10) +/** + * struct tegra_audio_clk_info - Tegra Audio Clk Information + * + * @name: name for the audio pll + * @pll_params: pll_params for audio pll + * @clk_id: clk_ids for the audio pll + * @parent: name of the parent of the audio pll + */ +struct tegra_audio_clk_info { + char *name; + struct tegra_clk_pll_params *pll_params; + int clk_id; + char *parent; +}; extern const struct clk_ops tegra_clk_pll_ops; extern const struct clk_ops tegra_clk_plle_ops; @@ -610,7 +637,8 @@ void tegra_register_devclks(struct tegra_devclk *dev_clks, int num); void tegra_audio_clk_init(void __iomem *clk_base, void __iomem *pmc_base, struct tegra_clk *tegra_clks, - struct tegra_clk_pll_params *pll_params); + struct tegra_audio_clk_info *audio_info, + unsigned int num_plls); void tegra_periph_clk_init(void __iomem *clk_base, void __iomem *pmc_base, struct tegra_clk *tegra_clks, diff --git a/drivers/clk/tegra/cvb.c b/drivers/clk/tegra/cvb.c index 0204e0861134..69c74eec3a4b 100644 --- a/drivers/clk/tegra/cvb.c +++ b/drivers/clk/tegra/cvb.c @@ -78,13 +78,6 @@ static int build_opp_table(const struct cvb_table *d, if (!table->freq || (table->freq > max_freq)) break; - /* - * FIXME after clk_round_rate/clk_determine_rate prototypes - * have been updated - */ - if (table->freq & (1<<31)) - continue; - dfll_mv = get_cvb_voltage( speedo_value, d->speedo_scale, &table->coefficients); dfll_mv = round_cvb_voltage(dfll_mv, d->voltage_scale, align); |