diff options
Diffstat (limited to 'drivers/clk/sunxi/clk-sunxi.c')
| -rw-r--r-- | drivers/clk/sunxi/clk-sunxi.c | 119 |
1 files changed, 110 insertions, 9 deletions
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index fb2ce8440f0e..8975972f6da5 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -164,6 +164,54 @@ static void sun6i_a31_get_pll1_factors(u32 *freq, u32 parent_rate, } /** + * sun8i_a23_get_pll1_factors() - calculates n, k, m, p factors for PLL1 + * PLL1 rate is calculated as follows + * rate = (parent_rate * (n + 1) * (k + 1) >> p) / (m + 1); + * parent_rate is always 24Mhz + */ + +static void sun8i_a23_get_pll1_factors(u32 *freq, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p) +{ + u8 div; + + /* Normalize value to a 6M multiple */ + div = *freq / 6000000; + *freq = 6000000 * div; + + /* we were called to round the frequency, we can now return */ + if (n == NULL) + return; + + /* m is always zero for pll1 */ + *m = 0; + + /* k is 1 only on these cases */ + if (*freq >= 768000000 || *freq == 42000000 || *freq == 54000000) + *k = 1; + else + *k = 0; + + /* p will be 2 for divs under 20 and odd divs under 32 */ + if (div < 20 || (div < 32 && (div & 1))) + *p = 2; + + /* p will be 1 for even divs under 32, divs under 40 and odd pairs + * of divs between 40-62 */ + else if (div < 40 || (div < 64 && (div & 2))) + *p = 1; + + /* any other entries have p = 0 */ + else + *p = 0; + + /* calculate a suitable n based on k and p */ + div <<= *p; + div /= (*k + 1); + *n = div / 4 - 1; +} + +/** * sun4i_get_pll5_factors() - calculates n, k factors for PLL5 * PLL5 rate is calculated as follows * rate = parent_rate * n * (k + 1) @@ -422,6 +470,18 @@ static struct clk_factors_config sun6i_a31_pll1_config = { .mwidth = 2, }; +static struct clk_factors_config sun8i_a23_pll1_config = { + .nshift = 8, + .nwidth = 5, + .kshift = 4, + .kwidth = 2, + .mshift = 0, + .mwidth = 2, + .pshift = 16, + .pwidth = 2, + .n_start = 1, +}; + static struct clk_factors_config sun4i_pll5_config = { .nshift = 8, .nwidth = 5, @@ -471,6 +531,12 @@ static const struct factors_data sun6i_a31_pll1_data __initconst = { .getter = sun6i_a31_get_pll1_factors, }; +static const struct factors_data sun8i_a23_pll1_data __initconst = { + .enable = 31, + .table = &sun8i_a23_pll1_config, + .getter = sun8i_a23_get_pll1_factors, +}; + static const struct factors_data sun7i_a20_pll4_data __initconst = { .enable = 31, .table = &sun4i_pll5_config, @@ -664,6 +730,7 @@ struct div_data { u8 shift; u8 pow; u8 width; + const struct clk_div_table *table; }; static const struct div_data sun4i_axi_data __initconst = { @@ -672,6 +739,23 @@ static const struct div_data sun4i_axi_data __initconst = { .width = 2, }; +static const struct clk_div_table sun8i_a23_axi_table[] __initconst = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 3 }, + { .val = 3, .div = 4 }, + { .val = 4, .div = 4 }, + { .val = 5, .div = 4 }, + { .val = 6, .div = 4 }, + { .val = 7, .div = 4 }, + { } /* sentinel */ +}; + +static const struct div_data sun8i_a23_axi_data __initconst = { + .width = 3, + .table = sun8i_a23_axi_table, +}; + static const struct div_data sun4i_ahb_data __initconst = { .shift = 4, .pow = 1, @@ -704,10 +788,10 @@ static void __init sunxi_divider_clk_setup(struct device_node *node, of_property_read_string(node, "clock-output-names", &clk_name); - clk = clk_register_divider(NULL, clk_name, clk_parent, 0, - reg, data->shift, data->width, - data->pow ? CLK_DIVIDER_POWER_OF_TWO : 0, - &clk_lock); + clk = clk_register_divider_table(NULL, clk_name, clk_parent, 0, + reg, data->shift, data->width, + data->pow ? CLK_DIVIDER_POWER_OF_TWO : 0, + data->table, &clk_lock); if (clk) { of_clk_add_provider(node, of_clk_src_simple_get, clk); clk_register_clkdev(clk, clk_name, NULL); @@ -804,6 +888,10 @@ static const struct gates_data sun7i_a20_ahb_gates_data __initconst = { .mask = { 0x12f77fff, 0x16ff3f }, }; +static const struct gates_data sun8i_a23_ahb1_gates_data __initconst = { + .mask = {0x25386742, 0x2505111}, +}; + static const struct gates_data sun4i_apb0_gates_data __initconst = { .mask = {0x4EF}, }; @@ -836,6 +924,10 @@ static const struct gates_data sun6i_a31_apb1_gates_data __initconst = { .mask = {0x3031}, }; +static const struct gates_data sun8i_a23_apb1_gates_data __initconst = { + .mask = {0x3021}, +}; + static const struct gates_data sun6i_a31_apb2_gates_data __initconst = { .mask = {0x3F000F}, }; @@ -844,6 +936,10 @@ static const struct gates_data sun7i_a20_apb1_gates_data __initconst = { .mask = { 0xff80ff }, }; +static const struct gates_data sun8i_a23_apb2_gates_data __initconst = { + .mask = {0x1F0007}, +}; + static const struct gates_data sun4i_a10_usb_gates_data __initconst = { .mask = {0x1C0}, .reset_mask = 0x07, @@ -870,7 +966,6 @@ static void __init sunxi_gates_clk_setup(struct device_node *node, int qty; int i = 0; int j = 0; - int ignore; reg = of_iomap(node, 0); @@ -891,14 +986,12 @@ static void __init sunxi_gates_clk_setup(struct device_node *node, of_property_read_string_index(node, "clock-output-names", j, &clk_name); - /* No driver claims this clock, but it should remain gated */ - ignore = !strcmp("ahb_sdram", clk_name) ? CLK_IGNORE_UNUSED : 0; - clk_data->clks[i] = clk_register_gate(NULL, clk_name, - clk_parent, ignore, + clk_parent, 0, reg + 4 * (i/32), i % 32, 0, &clk_lock); WARN_ON(IS_ERR(clk_data->clks[i])); + clk_register_clkdev(clk_data->clks[i], clk_name, NULL); j++; } @@ -1102,6 +1195,7 @@ free_clkdata: static const struct of_device_id clk_factors_match[] __initconst = { {.compatible = "allwinner,sun4i-a10-pll1-clk", .data = &sun4i_pll1_data,}, {.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,}, + {.compatible = "allwinner,sun8i-a23-pll1-clk", .data = &sun8i_a23_pll1_data,}, {.compatible = "allwinner,sun7i-a20-pll4-clk", .data = &sun7i_a20_pll4_data,}, {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,}, {.compatible = "allwinner,sun4i-a10-apb1-clk", .data = &sun4i_apb1_data,}, @@ -1113,6 +1207,7 @@ static const struct of_device_id clk_factors_match[] __initconst = { /* Matches for divider clocks */ static const struct of_device_id clk_div_match[] __initconst = { {.compatible = "allwinner,sun4i-a10-axi-clk", .data = &sun4i_axi_data,}, + {.compatible = "allwinner,sun8i-a23-axi-clk", .data = &sun8i_a23_axi_data,}, {.compatible = "allwinner,sun4i-a10-ahb-clk", .data = &sun4i_ahb_data,}, {.compatible = "allwinner,sun4i-a10-apb0-clk", .data = &sun4i_apb0_data,}, {.compatible = "allwinner,sun6i-a31-apb2-div-clk", .data = &sun6i_a31_apb2_div_data,}, @@ -1142,6 +1237,7 @@ static const struct of_device_id clk_gates_match[] __initconst = { {.compatible = "allwinner,sun5i-a13-ahb-gates-clk", .data = &sun5i_a13_ahb_gates_data,}, {.compatible = "allwinner,sun6i-a31-ahb1-gates-clk", .data = &sun6i_a31_ahb1_gates_data,}, {.compatible = "allwinner,sun7i-a20-ahb-gates-clk", .data = &sun7i_a20_ahb_gates_data,}, + {.compatible = "allwinner,sun8i-a23-ahb1-gates-clk", .data = &sun8i_a23_ahb1_gates_data,}, {.compatible = "allwinner,sun4i-a10-apb0-gates-clk", .data = &sun4i_apb0_gates_data,}, {.compatible = "allwinner,sun5i-a10s-apb0-gates-clk", .data = &sun5i_a10s_apb0_gates_data,}, {.compatible = "allwinner,sun5i-a13-apb0-gates-clk", .data = &sun5i_a13_apb0_gates_data,}, @@ -1151,7 +1247,9 @@ static const struct of_device_id clk_gates_match[] __initconst = { {.compatible = "allwinner,sun5i-a13-apb1-gates-clk", .data = &sun5i_a13_apb1_gates_data,}, {.compatible = "allwinner,sun6i-a31-apb1-gates-clk", .data = &sun6i_a31_apb1_gates_data,}, {.compatible = "allwinner,sun7i-a20-apb1-gates-clk", .data = &sun7i_a20_apb1_gates_data,}, + {.compatible = "allwinner,sun8i-a23-apb1-gates-clk", .data = &sun8i_a23_apb1_gates_data,}, {.compatible = "allwinner,sun6i-a31-apb2-gates-clk", .data = &sun6i_a31_apb2_gates_data,}, + {.compatible = "allwinner,sun8i-a23-apb2-gates-clk", .data = &sun8i_a23_apb2_gates_data,}, {.compatible = "allwinner,sun4i-a10-usb-clk", .data = &sun4i_a10_usb_gates_data,}, {.compatible = "allwinner,sun5i-a13-usb-clk", .data = &sun5i_a13_usb_gates_data,}, {.compatible = "allwinner,sun6i-a31-usb-clk", .data = &sun6i_a31_usb_gates_data,}, @@ -1202,6 +1300,7 @@ static void __init sunxi_init_clocks(const char *clocks[], int nclocks) static const char *sun4i_a10_critical_clocks[] __initdata = { "pll5_ddr", + "ahb_sdram", }; static void __init sun4i_a10_init_clocks(struct device_node *node) @@ -1214,6 +1313,7 @@ CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sun4i_a10_init_clocks) static const char *sun5i_critical_clocks[] __initdata = { "mbus", "pll5_ddr", + "ahb_sdram", }; static void __init sun5i_init_clocks(struct device_node *node) @@ -1236,3 +1336,4 @@ static void __init sun6i_init_clocks(struct device_node *node) ARRAY_SIZE(sun6i_critical_clocks)); } CLK_OF_DECLARE(sun6i_a31_clk_init, "allwinner,sun6i-a31", sun6i_init_clocks); +CLK_OF_DECLARE(sun8i_a23_clk_init, "allwinner,sun8i-a23", sun6i_init_clocks); |