diff options
Diffstat (limited to 'drivers/clk/bcm')
| -rw-r--r-- | drivers/clk/bcm/clk-raspberrypi.c | 26 |
1 files changed, 26 insertions, 0 deletions
diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c index f7185d421085..c879f2e9a4a7 100644 --- a/drivers/clk/bcm/clk-raspberrypi.c +++ b/drivers/clk/bcm/clk-raspberrypi.c @@ -76,6 +76,7 @@ struct raspberrypi_clk_data { struct raspberrypi_clk_variant { bool export; char *clkdev; + unsigned long min_rate; }; static struct raspberrypi_clk_variant @@ -89,6 +90,18 @@ raspberrypi_clk_variants[RPI_FIRMWARE_NUM_CLK_ID] = { }, [RPI_FIRMWARE_M2MC_CLK_ID] = { .export = true, + + /* + * If we boot without any cable connected to any of the + * HDMI connector, the firmware will skip the HSM + * initialization and leave it with a rate of 0, + * resulting in a bus lockup when we're accessing the + * registers even if it's enabled. + * + * Let's put a sensible default so that we don't end up + * in this situation. + */ + .min_rate = 120000000, }, [RPI_FIRMWARE_V3D_CLK_ID] = { .export = true, @@ -267,6 +280,19 @@ static struct clk_hw *raspberrypi_clk_register(struct raspberrypi_clk *rpi, } } + if (variant->min_rate) { + unsigned long rate; + + clk_hw_set_rate_range(&data->hw, variant->min_rate, max_rate); + + rate = raspberrypi_fw_get_rate(&data->hw, 0); + if (rate < variant->min_rate) { + ret = raspberrypi_fw_set_rate(&data->hw, variant->min_rate, 0); + if (ret) + return ERR_PTR(ret); + } + } + return &data->hw; } |