diff options
Diffstat (limited to 'drivers/char')
| -rw-r--r-- | drivers/char/amiserial.c | 36 | ||||
| -rw-r--r-- | drivers/char/bsr.c | 2 | ||||
| -rw-r--r-- | drivers/char/hvc_console.c | 14 | ||||
| -rw-r--r-- | drivers/char/hvc_irq.c | 2 | ||||
| -rw-r--r-- | drivers/char/pty.c | 4 | ||||
| -rw-r--r-- | drivers/char/ser_a2232.c | 12 | ||||
| -rw-r--r-- | drivers/char/synclink_gt.c | 16 | ||||
| -rw-r--r-- | drivers/char/sysrq.c | 6 | ||||
| -rw-r--r-- | drivers/char/tty_ioctl.c | 2 | ||||
| -rw-r--r-- | drivers/char/vme_scc.c | 166 |
10 files changed, 200 insertions, 60 deletions
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c index 4e0cfdeab146..a58869ea8513 100644 --- a/drivers/char/amiserial.c +++ b/drivers/char/amiserial.c @@ -1963,6 +1963,7 @@ static int __init rs_init(void) { unsigned long flags; struct serial_state * state; + int error; if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_SERIAL)) return -ENODEV; @@ -1975,8 +1976,11 @@ static int __init rs_init(void) * We request SERDAT and SERPER only, because the serial registers are * too spreaded over the custom register space */ - if (!request_mem_region(CUSTOM_PHYSADDR+0x30, 4, "amiserial [Paula]")) - return -EBUSY; + if (!request_mem_region(CUSTOM_PHYSADDR+0x30, 4, + "amiserial [Paula]")) { + error = -EBUSY; + goto fail_put_tty_driver; + } IRQ_ports = NULL; @@ -1997,8 +2001,9 @@ static int __init rs_init(void) serial_driver->flags = TTY_DRIVER_REAL_RAW; tty_set_operations(serial_driver, &serial_ops); - if (tty_register_driver(serial_driver)) - panic("Couldn't register serial driver\n"); + error = tty_register_driver(serial_driver); + if (error) + goto fail_release_mem_region; state = rs_table; state->magic = SSTATE_MAGIC; @@ -2024,8 +2029,14 @@ static int __init rs_init(void) local_irq_save(flags); /* set ISRs, and then disable the rx interrupts */ - request_irq(IRQ_AMIGA_TBE, ser_tx_int, 0, "serial TX", state); - request_irq(IRQ_AMIGA_RBF, ser_rx_int, IRQF_DISABLED, "serial RX", state); + error = request_irq(IRQ_AMIGA_TBE, ser_tx_int, 0, "serial TX", state); + if (error) + goto fail_unregister; + + error = request_irq(IRQ_AMIGA_RBF, ser_rx_int, IRQF_DISABLED, + "serial RX", state); + if (error) + goto fail_free_irq; /* turn off Rx and Tx interrupts */ custom.intena = IF_RBF | IF_TBE; @@ -2045,6 +2056,16 @@ static int __init rs_init(void) ciab.ddra &= ~(SER_DCD | SER_CTS | SER_DSR); /* inputs */ return 0; + +fail_free_irq: + free_irq(IRQ_AMIGA_TBE, state); +fail_unregister: + tty_unregister_driver(serial_driver); +fail_release_mem_region: + release_mem_region(CUSTOM_PHYSADDR+0x30, 4); +fail_put_tty_driver: + put_tty_driver(serial_driver); + return error; } static __exit void rs_exit(void) @@ -2064,6 +2085,9 @@ static __exit void rs_exit(void) kfree(info); } + free_irq(IRQ_AMIGA_TBE, rs_table); + free_irq(IRQ_AMIGA_RBF, rs_table); + release_mem_region(CUSTOM_PHYSADDR+0x30, 4); } diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c index 977dfb1096a0..f6094ae0ef33 100644 --- a/drivers/char/bsr.c +++ b/drivers/char/bsr.c @@ -103,7 +103,7 @@ static ssize_t bsr_len_show(struct device *dev, struct device_attribute *attr, char *buf) { struct bsr_dev *bsr_dev = dev_get_drvdata(dev); - return sprintf(buf, "%lu\n", bsr_dev->bsr_len); + return sprintf(buf, "%llu\n", bsr_dev->bsr_len); } static struct device_attribute bsr_dev_attrs[] = { diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c index 5a8a4c28c867..09676b4e5d89 100644 --- a/drivers/char/hvc_console.c +++ b/drivers/char/hvc_console.c @@ -318,7 +318,8 @@ static int hvc_open(struct tty_struct *tty, struct file * filp) } /* else count == 0 */ tty->driver_data = hp; - tty->low_latency = 1; /* Makes flushes to ldisc synchronous. */ + if (!hp->irq_requested) + tty->low_latency = 1; /* Makes flushes to ldisc synchronous. */ hp->tty = tty; @@ -764,13 +765,11 @@ struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int data, return ERR_PTR(err); } - hp = kmalloc(ALIGN(sizeof(*hp), sizeof(long)) + outbuf_size, + hp = kzalloc(ALIGN(sizeof(*hp), sizeof(long)) + outbuf_size, GFP_KERNEL); if (!hp) return ERR_PTR(-ENOMEM); - memset(hp, 0x00, sizeof(*hp)); - hp->vtermno = vtermno; hp->data = data; hp->ops = ops; @@ -876,8 +875,11 @@ static int hvc_init(void) goto stop_thread; } - /* FIXME: This mb() seems completely random. Remove it. */ - mb(); + /* + * Make sure tty is fully registered before allowing it to be + * found by hvc_console_device. + */ + smp_mb(); hvc_driver = drv; return 0; diff --git a/drivers/char/hvc_irq.c b/drivers/char/hvc_irq.c index d09e5688d449..2623e177e8d6 100644 --- a/drivers/char/hvc_irq.c +++ b/drivers/char/hvc_irq.c @@ -37,7 +37,7 @@ int notifier_add_irq(struct hvc_struct *hp, int irq) void notifier_del_irq(struct hvc_struct *hp, int irq) { - if (!irq) + if (!hp->irq_requested) return; free_irq(irq, hp); hp->irq_requested = 0; diff --git a/drivers/char/pty.c b/drivers/char/pty.c index 146c97613da0..31038a0052a2 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -230,9 +230,7 @@ static void pty_set_termios(struct tty_struct *tty, /** * pty_do_resize - resize event * @tty: tty being resized - * @real_tty: real tty (not the same as tty if using a pty/tty pair) - * @rows: rows (character) - * @cols: cols (character) + * @ws: window size being set. * * Update the termios variables and send the neccessary signals to * peform a terminal resize correctly diff --git a/drivers/char/ser_a2232.c b/drivers/char/ser_a2232.c index 33872a219df6..33a2b531802e 100644 --- a/drivers/char/ser_a2232.c +++ b/drivers/char/ser_a2232.c @@ -718,6 +718,7 @@ static int __init a2232board_init(void) u_char *from; volatile u_char *to; volatile struct a2232memory *mem; + int error, i; #ifdef CONFIG_SMP return -ENODEV; /* This driver is not SMP aware. Is there an SMP ZorroII-bus-machine? */ @@ -797,8 +798,15 @@ static int __init a2232board_init(void) */ if (a2232_init_drivers()) return -ENODEV; // maybe we should use a different -Exxx? - request_irq(IRQ_AMIGA_VERTB, a2232_vbl_inter, 0, "A2232 serial VBL", a2232_driver_ID); - return 0; + error = request_irq(IRQ_AMIGA_VERTB, a2232_vbl_inter, 0, + "A2232 serial VBL", a2232_driver_ID); + if (error) { + for (i = 0; i < nr_a2232; i++) + zorro_release_device(zd_a2232[i]); + tty_unregister_driver(a2232_driver); + put_tty_driver(a2232_driver); + } + return error; } static void __exit a2232board_exit(void) diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 53544e21f191..f329f459817c 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -1,6 +1,4 @@ /* - * $Id: synclink_gt.c,v 4.50 2007/07/25 19:29:25 paulkf Exp $ - * * Device driver for Microgate SyncLink GT serial adapters. * * written by Paul Fulghum for Microgate Corporation @@ -91,7 +89,6 @@ * module identification */ static char *driver_name = "SyncLink GT"; -static char *driver_version = "$Revision: 4.50 $"; static char *tty_driver_name = "synclink_gt"; static char *tty_dev_prefix = "ttySLG"; MODULE_LICENSE("GPL"); @@ -1309,7 +1306,7 @@ static int read_proc(char *page, char **start, off_t off, int count, off_t begin = 0; struct slgt_info *info; - len += sprintf(page, "synclink_gt driver:%s\n", driver_version); + len += sprintf(page, "synclink_gt driver\n"); info = slgt_device_list; while( info ) { @@ -2441,7 +2438,7 @@ static void program_hw(struct slgt_info *info) info->ri_chkcount = 0; info->dsr_chkcount = 0; - slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR); + slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI); get_signals(info); if (info->netcount || @@ -3576,7 +3573,7 @@ static void slgt_cleanup(void) struct slgt_info *info; struct slgt_info *tmp; - printk("unload %s %s\n", driver_name, driver_version); + printk(KERN_INFO "unload %s\n", driver_name); if (serial_driver) { for (info=slgt_device_list ; info != NULL ; info=info->next_device) @@ -3619,7 +3616,7 @@ static int __init slgt_init(void) { int rc; - printk("%s %s\n", driver_name, driver_version); + printk(KERN_INFO "%s\n", driver_name); serial_driver = alloc_tty_driver(MAX_DEVICES); if (!serial_driver) { @@ -3650,9 +3647,8 @@ static int __init slgt_init(void) goto error; } - printk("%s %s, tty major#%d\n", - driver_name, driver_version, - serial_driver->major); + printk(KERN_INFO "%s, tty major#%d\n", + driver_name, serial_driver->major); slgt_device_count = 0; if ((rc = pci_register_driver(&pci_driver)) < 0) { diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c index d41b9f6f7903..33a9351c896d 100644 --- a/drivers/char/sysrq.c +++ b/drivers/char/sysrq.c @@ -473,6 +473,12 @@ void __handle_sysrq(int key, struct tty_struct *tty, int check_mask) unsigned long flags; spin_lock_irqsave(&sysrq_key_table_lock, flags); + /* + * Raise the apparent loglevel to maximum so that the sysrq header + * is shown to provide the user with positive feedback. We do not + * simply emit this at KERN_EMERG as that would change message + * routing in the consumers of /proc/kmsg. + */ orig_log_level = console_loglevel; console_loglevel = 7; printk(KERN_INFO "SysRq : "); diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index a408c8e487ec..6f4c7d0a53bf 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -1057,7 +1057,7 @@ int tty_perform_flush(struct tty_struct *tty, unsigned long arg) if (retval) return retval; - ld = tty_ldisc_ref(tty); + ld = tty_ldisc_ref_wait(tty); switch (arg) { case TCIFLUSH: if (ld && ld->ops->flush_buffer) diff --git a/drivers/char/vme_scc.c b/drivers/char/vme_scc.c index 0e8234bd0e19..994e1a58b987 100644 --- a/drivers/char/vme_scc.c +++ b/drivers/char/vme_scc.c @@ -198,6 +198,7 @@ static void scc_init_portstructs(void) static int mvme147_scc_init(void) { struct scc_port *port; + int error; printk(KERN_INFO "SCC: MVME147 Serial Driver\n"); /* Init channel A */ @@ -207,14 +208,23 @@ static int mvme147_scc_init(void) port->datap = port->ctrlp + 1; port->port_a = &scc_ports[0]; port->port_b = &scc_ports[1]; - request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED, + error = request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED, "SCC-A TX", port); - request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED, + if (error) + goto fail; + error = request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED, "SCC-A status", port); - request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED, + if (error) + goto fail_free_a_tx; + error = request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED, "SCC-A RX", port); - request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED, - "SCC-A special cond", port); + if (error) + goto fail_free_a_stat; + error = request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int, + IRQF_DISABLED, "SCC-A special cond", port); + if (error) + goto fail_free_a_rx; + { SCC_ACCESS_INIT(port); @@ -234,14 +244,23 @@ static int mvme147_scc_init(void) port->datap = port->ctrlp + 1; port->port_a = &scc_ports[0]; port->port_b = &scc_ports[1]; - request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED, + error = request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED, "SCC-B TX", port); - request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED, + if (error) + goto fail_free_a_spcond; + error = request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED, "SCC-B status", port); - request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED, + if (error) + goto fail_free_b_tx; + error = request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED, "SCC-B RX", port); - request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED, - "SCC-B special cond", port); + if (error) + goto fail_free_b_stat; + error = request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int, + IRQF_DISABLED, "SCC-B special cond", port); + if (error) + goto fail_free_b_rx; + { SCC_ACCESS_INIT(port); @@ -257,6 +276,23 @@ static int mvme147_scc_init(void) scc_init_drivers(); return 0; + +fail_free_b_rx: + free_irq(MVME147_IRQ_SCCB_RX, port); +fail_free_b_stat: + free_irq(MVME147_IRQ_SCCB_STAT, port); +fail_free_b_tx: + free_irq(MVME147_IRQ_SCCB_TX, port); +fail_free_a_spcond: + free_irq(MVME147_IRQ_SCCA_SPCOND, port); +fail_free_a_rx: + free_irq(MVME147_IRQ_SCCA_RX, port); +fail_free_a_stat: + free_irq(MVME147_IRQ_SCCA_STAT, port); +fail_free_a_tx: + free_irq(MVME147_IRQ_SCCA_TX, port); +fail: + return error; } #endif @@ -265,6 +301,7 @@ static int mvme147_scc_init(void) static int mvme162_scc_init(void) { struct scc_port *port; + int error; if (!(mvme16x_config & MVME16x_CONFIG_GOT_SCCA)) return (-ENODEV); @@ -277,14 +314,23 @@ static int mvme162_scc_init(void) port->datap = port->ctrlp + 2; port->port_a = &scc_ports[0]; port->port_b = &scc_ports[1]; - request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED, + error = request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED, "SCC-A TX", port); - request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED, + if (error) + goto fail; + error = request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED, "SCC-A status", port); - request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED, + if (error) + goto fail_free_a_tx; + error = request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED, "SCC-A RX", port); - request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED, - "SCC-A special cond", port); + if (error) + goto fail_free_a_stat; + error = request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int, + IRQF_DISABLED, "SCC-A special cond", port); + if (error) + goto fail_free_a_rx; + { SCC_ACCESS_INIT(port); @@ -304,14 +350,22 @@ static int mvme162_scc_init(void) port->datap = port->ctrlp + 2; port->port_a = &scc_ports[0]; port->port_b = &scc_ports[1]; - request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED, + error = request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED, "SCC-B TX", port); - request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED, + if (error) + goto fail_free_a_spcond; + error = request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED, "SCC-B status", port); - request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED, + if (error) + goto fail_free_b_tx; + error = request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED, "SCC-B RX", port); - request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED, - "SCC-B special cond", port); + if (error) + goto fail_free_b_stat; + error = request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int, + IRQF_DISABLED, "SCC-B special cond", port); + if (error) + goto fail_free_b_rx; { SCC_ACCESS_INIT(port); /* Either channel will do */ @@ -328,6 +382,23 @@ static int mvme162_scc_init(void) scc_init_drivers(); return 0; + +fail_free_b_rx: + free_irq(MVME162_IRQ_SCCB_RX, port); +fail_free_b_stat: + free_irq(MVME162_IRQ_SCCB_STAT, port); +fail_free_b_tx: + free_irq(MVME162_IRQ_SCCB_TX, port); +fail_free_a_spcond: + free_irq(MVME162_IRQ_SCCA_SPCOND, port); +fail_free_a_rx: + free_irq(MVME162_IRQ_SCCA_RX, port); +fail_free_a_stat: + free_irq(MVME162_IRQ_SCCA_STAT, port); +fail_free_a_tx: + free_irq(MVME162_IRQ_SCCA_TX, port); +fail: + return error; } #endif @@ -336,6 +407,7 @@ static int mvme162_scc_init(void) static int bvme6000_scc_init(void) { struct scc_port *port; + int error; printk(KERN_INFO "SCC: BVME6000 Serial Driver\n"); /* Init channel A */ @@ -345,14 +417,23 @@ static int bvme6000_scc_init(void) port->datap = port->ctrlp + 4; port->port_a = &scc_ports[0]; port->port_b = &scc_ports[1]; - request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED, + error = request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED, "SCC-A TX", port); - request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED, + if (error) + goto fail; + error = request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED, "SCC-A status", port); - request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED, + if (error) + goto fail_free_a_tx; + error = request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED, "SCC-A RX", port); - request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED, - "SCC-A special cond", port); + if (error) + goto fail_free_a_stat; + error = request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int, + IRQF_DISABLED, "SCC-A special cond", port); + if (error) + goto fail_free_a_rx; + { SCC_ACCESS_INIT(port); @@ -372,14 +453,22 @@ static int bvme6000_scc_init(void) port->datap = port->ctrlp + 4; port->port_a = &scc_ports[0]; port->port_b = &scc_ports[1]; - request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED, + error = request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED, "SCC-B TX", port); - request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED, + if (error) + goto fail_free_a_spcond; + error = request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED, "SCC-B status", port); - request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED, + if (error) + goto fail_free_b_tx; + error = request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED, "SCC-B RX", port); - request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED, - "SCC-B special cond", port); + if (error) + goto fail_free_b_stat; + error = request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int, + IRQF_DISABLED, "SCC-B special cond", port); + if (error) + goto fail_free_b_rx; { SCC_ACCESS_INIT(port); /* Either channel will do */ @@ -393,6 +482,23 @@ static int bvme6000_scc_init(void) scc_init_drivers(); return 0; + +fail: + free_irq(BVME_IRQ_SCCA_STAT, port); +fail_free_a_tx: + free_irq(BVME_IRQ_SCCA_RX, port); +fail_free_a_stat: + free_irq(BVME_IRQ_SCCA_SPCOND, port); +fail_free_a_rx: + free_irq(BVME_IRQ_SCCB_TX, port); +fail_free_a_spcond: + free_irq(BVME_IRQ_SCCB_STAT, port); +fail_free_b_tx: + free_irq(BVME_IRQ_SCCB_RX, port); +fail_free_b_stat: + free_irq(BVME_IRQ_SCCB_SPCOND, port); +fail_free_b_rx: + return error; } #endif |