diff options
Diffstat (limited to 'drivers/ata')
| -rw-r--r-- | drivers/ata/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/ata/Makefile | 1 | ||||
| -rw-r--r-- | drivers/ata/ahci.c | 103 | ||||
| -rw-r--r-- | drivers/ata/ahci_mvebu.c | 2 | ||||
| -rw-r--r-- | drivers/ata/ahci_st.c | 49 | ||||
| -rw-r--r-- | drivers/ata/libahci.c | 3 | ||||
| -rw-r--r-- | drivers/ata/libata-core.c | 34 | ||||
| -rw-r--r-- | drivers/ata/libata-eh.c | 3 | ||||
| -rw-r--r-- | drivers/ata/pata_octeon_cf.c | 2 | ||||
| -rw-r--r-- | drivers/ata/pata_scc.c | 1110 |
10 files changed, 159 insertions, 1158 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5f601553b9b0..9dca4b995be0 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -270,6 +270,7 @@ config ATA_PIIX config SATA_DWC tristate "DesignWare Cores SATA support" depends on 460EX + select DW_DMAC help This option enables support for the on-chip SATA controller of the AppliedMicro processor 460EX. @@ -729,15 +730,6 @@ config PATA_SC1200 If unsure, say N. -config PATA_SCC - tristate "Toshiba's Cell Reference Set IDE support" - depends on PCI && PPC_CELLEB - help - This option enables support for the built-in IDE controller on - Toshiba Cell Reference Board. - - If unsure, say N. - config PATA_SCH tristate "Intel SCH PATA support" depends on PCI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index b67e995179a9..40f7865f20a1 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -75,7 +75,6 @@ obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o obj-$(CONFIG_PATA_RDC) += pata_rdc.o obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o -obj-$(CONFIG_PATA_SCC) += pata_scc.o obj-$(CONFIG_PATA_SCH) += pata_sch.o obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o obj-$(CONFIG_PATA_SIL680) += pata_sil680.o diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index c7a92a743ed0..65ee94454bbd 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -66,6 +66,7 @@ enum board_ids { board_ahci_yes_fbs, /* board IDs for specific chipsets in alphabetical order */ + board_ahci_avn, board_ahci_mcp65, board_ahci_mcp77, board_ahci_mcp89, @@ -84,6 +85,8 @@ enum board_ids { static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); +static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static void ahci_mcp89_apple_enable(struct pci_dev *pdev); static bool is_mcp89_apple(struct pci_dev *pdev); static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, @@ -107,6 +110,11 @@ static struct ata_port_operations ahci_p5wdh_ops = { .hardreset = ahci_p5wdh_hardreset, }; +static struct ata_port_operations ahci_avn_ops = { + .inherits = &ahci_ops, + .hardreset = ahci_avn_hardreset, +}; + static const struct ata_port_info ahci_port_info[] = { /* by features */ [board_ahci] = { @@ -151,6 +159,12 @@ static const struct ata_port_info ahci_port_info[] = { .port_ops = &ahci_ops, }, /* by chipsets */ + [board_ahci_avn] = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_avn_ops, + }, [board_ahci_mcp65] = { AHCI_HFLAGS (AHCI_HFLAG_NO_FPDMA_AA | AHCI_HFLAG_NO_PMP | AHCI_HFLAG_YES_NCQ), @@ -290,14 +304,14 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x1f27), board_ahci }, /* Avoton RAID */ { PCI_VDEVICE(INTEL, 0x1f2e), board_ahci }, /* Avoton RAID */ { PCI_VDEVICE(INTEL, 0x1f2f), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f32), board_ahci }, /* Avoton AHCI */ - { PCI_VDEVICE(INTEL, 0x1f33), board_ahci }, /* Avoton AHCI */ - { PCI_VDEVICE(INTEL, 0x1f34), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f35), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f36), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f37), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f3e), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f3f), board_ahci }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f32), board_ahci_avn }, /* Avoton AHCI */ + { PCI_VDEVICE(INTEL, 0x1f33), board_ahci_avn }, /* Avoton AHCI */ + { PCI_VDEVICE(INTEL, 0x1f34), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f35), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f36), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f37), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f3e), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f3f), board_ahci_avn }, /* Avoton RAID */ { PCI_VDEVICE(INTEL, 0x2823), board_ahci }, /* Wellsburg RAID */ { PCI_VDEVICE(INTEL, 0x2827), board_ahci }, /* Wellsburg RAID */ { PCI_VDEVICE(INTEL, 0x8d02), board_ahci }, /* Wellsburg AHCI */ @@ -670,6 +684,79 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, return rc; } +/* + * ahci_avn_hardreset - attempt more aggressive recovery of Avoton ports. + * + * It has been observed with some SSDs that the timing of events in the + * link synchronization phase can leave the port in a state that can not + * be recovered by a SATA-hard-reset alone. The failing signature is + * SStatus.DET stuck at 1 ("Device presence detected but Phy + * communication not established"). It was found that unloading and + * reloading the driver when this problem occurs allows the drive + * connection to be recovered (DET advanced to 0x3). The critical + * component of reloading the driver is that the port state machines are + * reset by bouncing "port enable" in the AHCI PCS configuration + * register. So, reproduce that effect by bouncing a port whenever we + * see DET==1 after a reset. + */ +static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_host_priv *hpriv = ap->host->private_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + unsigned long tmo = deadline - jiffies; + struct ata_taskfile tf; + bool online; + int rc, i; + + DPRINTK("ENTER\n"); + + ahci_stop_engine(ap); + + for (i = 0; i < 2; i++) { + u16 val; + u32 sstatus; + int port = ap->port_no; + struct ata_host *host = ap->host; + struct pci_dev *pdev = to_pci_dev(host->dev); + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); + tf.command = ATA_BUSY; + ata_tf_to_fis(&tf, 0, 0, d2h_fis); + + rc = sata_link_hardreset(link, timing, deadline, &online, + ahci_check_ready); + + if (sata_scr_read(link, SCR_STATUS, &sstatus) != 0 || + (sstatus & 0xf) != 1) + break; + + ata_link_printk(link, KERN_INFO, "avn bounce port%d\n", + port); + + pci_read_config_word(pdev, 0x92, &val); + val &= ~(1 << port); + pci_write_config_word(pdev, 0x92, val); + ata_msleep(ap, 1000); + val |= 1 << port; + pci_write_config_word(pdev, 0x92, val); + deadline += tmo; + } + + hpriv->start_engine(ap); + + if (online) + *class = ahci_dev_classify(ap); + + DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); + return rc; +} + + #ifdef CONFIG_PM static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) { diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c index 23716dd8a7ec..5928d0746a27 100644 --- a/drivers/ata/ahci_mvebu.c +++ b/drivers/ata/ahci_mvebu.c @@ -45,7 +45,7 @@ static void ahci_mvebu_mbus_config(struct ahci_host_priv *hpriv, writel((cs->mbus_attr << 8) | (dram->mbus_dram_target_id << 4) | 1, hpriv->mmio + AHCI_WINDOW_CTRL(i)); - writel(cs->base, hpriv->mmio + AHCI_WINDOW_BASE(i)); + writel(cs->base >> 16, hpriv->mmio + AHCI_WINDOW_BASE(i)); writel(((cs->size - 1) & 0xffff0000), hpriv->mmio + AHCI_WINDOW_SIZE(i)); } diff --git a/drivers/ata/ahci_st.c b/drivers/ata/ahci_st.c index ea0ff005b86c..8ff428fe8e0f 100644 --- a/drivers/ata/ahci_st.c +++ b/drivers/ata/ahci_st.c @@ -37,7 +37,6 @@ struct st_ahci_drv_data { struct reset_control *pwr; struct reset_control *sw_rst; struct reset_control *pwr_rst; - struct ahci_host_priv *hpriv; }; static void st_ahci_configure_oob(void __iomem *mmio) @@ -55,9 +54,10 @@ static void st_ahci_configure_oob(void __iomem *mmio) writel(new_val, mmio + ST_AHCI_OOBR); } -static int st_ahci_deassert_resets(struct device *dev) +static int st_ahci_deassert_resets(struct ahci_host_priv *hpriv, + struct device *dev) { - struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev); + struct st_ahci_drv_data *drv_data = hpriv->plat_data; int err; if (drv_data->pwr) { @@ -90,8 +90,8 @@ static int st_ahci_deassert_resets(struct device *dev) static void st_ahci_host_stop(struct ata_host *host) { struct ahci_host_priv *hpriv = host->private_data; + struct st_ahci_drv_data *drv_data = hpriv->plat_data; struct device *dev = host->dev; - struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev); int err; if (drv_data->pwr) { @@ -103,29 +103,30 @@ static void st_ahci_host_stop(struct ata_host *host) ahci_platform_disable_resources(hpriv); } -static int st_ahci_probe_resets(struct platform_device *pdev) +static int st_ahci_probe_resets(struct ahci_host_priv *hpriv, + struct device *dev) { - struct st_ahci_drv_data *drv_data = platform_get_drvdata(pdev); + struct st_ahci_drv_data *drv_data = hpriv->plat_data; - drv_data->pwr = devm_reset_control_get(&pdev->dev, "pwr-dwn"); + drv_data->pwr = devm_reset_control_get(dev, "pwr-dwn"); if (IS_ERR(drv_data->pwr)) { - dev_info(&pdev->dev, "power reset control not defined\n"); + dev_info(dev, "power reset control not defined\n"); drv_data->pwr = NULL; } - drv_data->sw_rst = devm_reset_control_get(&pdev->dev, "sw-rst"); + drv_data->sw_rst = devm_reset_control_get(dev, "sw-rst"); if (IS_ERR(drv_data->sw_rst)) { - dev_info(&pdev->dev, "soft reset control not defined\n"); + dev_info(dev, "soft reset control not defined\n"); drv_data->sw_rst = NULL; } - drv_data->pwr_rst = devm_reset_control_get(&pdev->dev, "pwr-rst"); + drv_data->pwr_rst = devm_reset_control_get(dev, "pwr-rst"); if (IS_ERR(drv_data->pwr_rst)) { - dev_dbg(&pdev->dev, "power soft reset control not defined\n"); + dev_dbg(dev, "power soft reset control not defined\n"); drv_data->pwr_rst = NULL; } - return st_ahci_deassert_resets(&pdev->dev); + return st_ahci_deassert_resets(hpriv, dev); } static struct ata_port_operations st_ahci_port_ops = { @@ -154,15 +155,12 @@ static int st_ahci_probe(struct platform_device *pdev) if (!drv_data) return -ENOMEM; - platform_set_drvdata(pdev, drv_data); - hpriv = ahci_platform_get_resources(pdev); if (IS_ERR(hpriv)) return PTR_ERR(hpriv); + hpriv->plat_data = drv_data; - drv_data->hpriv = hpriv; - - err = st_ahci_probe_resets(pdev); + err = st_ahci_probe_resets(hpriv, &pdev->dev); if (err) return err; @@ -170,7 +168,7 @@ static int st_ahci_probe(struct platform_device *pdev) if (err) return err; - st_ahci_configure_oob(drv_data->hpriv->mmio); + st_ahci_configure_oob(hpriv->mmio); err = ahci_platform_init_host(pdev, hpriv, &st_ahci_port_info, &ahci_platform_sht); @@ -185,8 +183,9 @@ static int st_ahci_probe(struct platform_device *pdev) #ifdef CONFIG_PM_SLEEP static int st_ahci_suspend(struct device *dev) { - struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev); - struct ahci_host_priv *hpriv = drv_data->hpriv; + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + struct st_ahci_drv_data *drv_data = hpriv->plat_data; int err; err = ahci_platform_suspend_host(dev); @@ -208,21 +207,21 @@ static int st_ahci_suspend(struct device *dev) static int st_ahci_resume(struct device *dev) { - struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev); - struct ahci_host_priv *hpriv = drv_data->hpriv; + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; int err; err = ahci_platform_enable_resources(hpriv); if (err) return err; - err = st_ahci_deassert_resets(dev); + err = st_ahci_deassert_resets(hpriv, dev); if (err) { ahci_platform_disable_resources(hpriv); return err; } - st_ahci_configure_oob(drv_data->hpriv->mmio); + st_ahci_configure_oob(hpriv->mmio); return ahci_platform_resume_host(dev); } diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 61a9c07e0dff..287c4ba0219f 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1707,8 +1707,7 @@ static void ahci_handle_port_interrupt(struct ata_port *ap, if (unlikely(resetting)) status &= ~PORT_IRQ_BAD_PMP; - /* if LPM is enabled, PHYRDY doesn't mean anything */ - if (ap->link.lpm_policy > ATA_LPM_MAX_POWER) { + if (sata_lpm_ignore_phy_events(&ap->link)) { status &= ~PORT_IRQ_PHYRDY; ahci_scr_write(&ap->link, SCR_ERROR, SERR_PHYRDY_CHG); } diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index f6cb1f1b30b7..577849c6611a 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4235,7 +4235,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "Crucial_CT*MX100*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, - { "Samsung SSD 850 PRO*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | + { "Samsung SSD 8*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, /* @@ -6752,6 +6752,38 @@ u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask, u32 val, return tmp; } +/** + * sata_lpm_ignore_phy_events - test if PHY event should be ignored + * @link: Link receiving the event + * + * Test whether the received PHY event has to be ignored or not. + * + * LOCKING: + * None: + * + * RETURNS: + * True if the event has to be ignored. + */ +bool sata_lpm_ignore_phy_events(struct ata_link *link) +{ + unsigned long lpm_timeout = link->last_lpm_change + + msecs_to_jiffies(ATA_TMOUT_SPURIOUS_PHY); + + /* if LPM is enabled, PHYRDY doesn't mean anything */ + if (link->lpm_policy > ATA_LPM_MAX_POWER) + return true; + + /* ignore the first PHY event after the LPM policy changed + * as it is might be spurious + */ + if ((link->flags & ATA_LFLAG_CHANGED) && + time_before(jiffies, lpm_timeout)) + return true; + + return false; +} +EXPORT_SYMBOL_GPL(sata_lpm_ignore_phy_events); + /* * Dummy port_ops */ diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 07f41be38fbe..cf0022ec07f2 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -3597,6 +3597,9 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, } } + link->last_lpm_change = jiffies; + link->flags |= ATA_LFLAG_CHANGED; + return 0; fail: diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c index 80a80548ad0a..27245957eee3 100644 --- a/drivers/ata/pata_octeon_cf.c +++ b/drivers/ata/pata_octeon_cf.c @@ -1053,7 +1053,7 @@ static struct of_device_id octeon_cf_match[] = { }, {}, }; -MODULE_DEVICE_TABLE(of, octeon_i2c_match); +MODULE_DEVICE_TABLE(of, octeon_cf_match); static struct platform_driver octeon_cf_driver = { .probe = octeon_cf_probe, diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c deleted file mode 100644 index 5cd60d6388ec..000000000000 --- a/drivers/ata/pata_scc.c +++ /dev/null @@ -1,1110 +0,0 @@ -/* - * Support for IDE interfaces on Celleb platform - * - * (C) Copyright 2006 TOSHIBA CORPORATION - * - * This code is based on drivers/ata/ata_piix.c: - * Copyright 2003-2005 Red Hat Inc - * Copyright 2003-2005 Jeff Garzik - * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer - * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat Inc - * - * and drivers/ata/ahci.c: - * Copyright 2004-2005 Red Hat, Inc. - * - * and drivers/ata/libata-core.c: - * Copyright 2003-2004 Red Hat, Inc. All rights reserved. - * Copyright 2003-2004 Jeff Garzik - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <scsi/scsi_host.h> -#include <linux/libata.h> - -#define DRV_NAME "pata_scc" -#define DRV_VERSION "0.3" - -#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4 - -/* PCI BARs */ -#define SCC_CTRL_BAR 0 -#define SCC_BMID_BAR 1 - -/* offset of CTRL registers */ -#define SCC_CTL_PIOSHT 0x000 -#define SCC_CTL_PIOCT 0x004 -#define SCC_CTL_MDMACT 0x008 -#define SCC_CTL_MCRCST 0x00C -#define SCC_CTL_SDMACT 0x010 -#define SCC_CTL_SCRCST 0x014 -#define SCC_CTL_UDENVT 0x018 -#define SCC_CTL_TDVHSEL 0x020 -#define SCC_CTL_MODEREG 0x024 -#define SCC_CTL_ECMODE 0xF00 -#define SCC_CTL_MAEA0 0xF50 -#define SCC_CTL_MAEC0 0xF54 -#define SCC_CTL_CCKCTRL 0xFF0 - -/* offset of BMID registers */ -#define SCC_DMA_CMD 0x000 -#define SCC_DMA_STATUS 0x004 -#define SCC_DMA_TABLE_OFS 0x008 -#define SCC_DMA_INTMASK 0x010 -#define SCC_DMA_INTST 0x014 -#define SCC_DMA_PTERADD 0x018 -#define SCC_REG_CMD_ADDR 0x020 -#define SCC_REG_DATA 0x000 -#define SCC_REG_ERR 0x004 -#define SCC_REG_FEATURE 0x004 -#define SCC_REG_NSECT 0x008 -#define SCC_REG_LBAL 0x00C -#define SCC_REG_LBAM 0x010 -#define SCC_REG_LBAH 0x014 -#define SCC_REG_DEVICE 0x018 -#define SCC_REG_STATUS 0x01C -#define SCC_REG_CMD 0x01C -#define SCC_REG_ALTSTATUS 0x020 - -/* register value */ -#define TDVHSEL_MASTER 0x00000001 -#define TDVHSEL_SLAVE 0x00000004 - -#define MODE_JCUSFEN 0x00000080 - -#define ECMODE_VALUE 0x01 - -#define CCKCTRL_ATARESET 0x00040000 -#define CCKCTRL_BUFCNT 0x00020000 -#define CCKCTRL_CRST 0x00010000 -#define CCKCTRL_OCLKEN 0x00000100 -#define CCKCTRL_ATACLKOEN 0x00000002 -#define CCKCTRL_LCLKEN 0x00000001 - -#define QCHCD_IOS_SS 0x00000001 - -#define QCHSD_STPDIAG 0x00020000 - -#define INTMASK_MSK 0xD1000012 -#define INTSTS_SERROR 0x80000000 -#define INTSTS_PRERR 0x40000000 -#define INTSTS_RERR 0x10000000 -#define INTSTS_ICERR 0x01000000 -#define INTSTS_BMSINT 0x00000010 -#define INTSTS_BMHE 0x00000008 -#define INTSTS_IOIRQS 0x00000004 -#define INTSTS_INTRQ 0x00000002 -#define INTSTS_ACTEINT 0x00000001 - - -/* PIO transfer mode table */ -/* JCHST */ -static const unsigned long JCHSTtbl[2][7] = { - {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */ - {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */ -}; - -/* JCHHT */ -static const unsigned long JCHHTtbl[2][7] = { - {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */ - {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */ -}; - -/* JCHCT */ -static const unsigned long JCHCTtbl[2][7] = { - {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */ - {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */ -}; - -/* DMA transfer mode table */ -/* JCHDCTM/JCHDCTS */ -static const unsigned long JCHDCTxtbl[2][7] = { - {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */ - {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */ -}; - -/* JCSTWTM/JCSTWTS */ -static const unsigned long JCSTWTxtbl[2][7] = { - {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */ - {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ -}; - -/* JCTSS */ -static const unsigned long JCTSStbl[2][7] = { - {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */ - {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */ -}; - -/* JCENVT */ -static const unsigned long JCENVTtbl[2][7] = { - {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */ - {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ -}; - -/* JCACTSELS/JCACTSELM */ -static const unsigned long JCACTSELtbl[2][7] = { - {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */ - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */ -}; - -static const struct pci_device_id scc_pci_tbl[] = { - { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0}, - { } /* terminate list */ -}; - -/** - * scc_set_piomode - Initialize host controller PATA PIO timings - * @ap: Port whose timings we are configuring - * @adev: um - * - * Set PIO mode for device. - * - * LOCKING: - * None (inherited from caller). - */ - -static void scc_set_piomode (struct ata_port *ap, struct ata_device *adev) -{ - unsigned int pio = adev->pio_mode - XFER_PIO_0; - void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR]; - void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL; - void __iomem *piosht_port = ctrl_base + SCC_CTL_PIOSHT; - void __iomem *pioct_port = ctrl_base + SCC_CTL_PIOCT; - unsigned long reg; - int offset; - - reg = in_be32(cckctrl_port); - if (reg & CCKCTRL_ATACLKOEN) - offset = 1; /* 133MHz */ - else - offset = 0; /* 100MHz */ - - reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio]; - out_be32(piosht_port, reg); - reg = JCHCTtbl[offset][pio]; - out_be32(pioct_port, reg); -} - -/** - * scc_set_dmamode - Initialize host controller PATA DMA timings - * @ap: Port whose timings we are configuring - * @adev: um - * - * Set UDMA mode for device. - * - * LOCKING: - * None (inherited from caller). - */ - -static void scc_set_dmamode (struct ata_port *ap, struct ata_device *adev) -{ - unsigned int udma = adev->dma_mode; - unsigned int is_slave = (adev->devno != 0); - u8 speed = udma; - void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR]; - void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL; - void __iomem *mdmact_port = ctrl_base + SCC_CTL_MDMACT; - void __iomem *mcrcst_port = ctrl_base + SCC_CTL_MCRCST; - void __iomem *sdmact_port = ctrl_base + SCC_CTL_SDMACT; - void __iomem *scrcst_port = ctrl_base + SCC_CTL_SCRCST; - void __iomem *udenvt_port = ctrl_base + SCC_CTL_UDENVT; - void __iomem *tdvhsel_port = ctrl_base + SCC_CTL_TDVHSEL; - int offset, idx; - - if (in_be32(cckctrl_port) & CCKCTRL_ATACLKOEN) - offset = 1; /* 133MHz */ - else - offset = 0; /* 100MHz */ - - if (speed >= XFER_UDMA_0) - idx = speed - XFER_UDMA_0; - else - return; - - if (is_slave) { - out_be32(sdmact_port, JCHDCTxtbl[offset][idx]); - out_be32(scrcst_port, JCSTWTxtbl[offset][idx]); - out_be32(tdvhsel_port, - (in_be32(tdvhsel_port) & ~TDVHSEL_SLAVE) | (JCACTSELtbl[offset][idx] << 2)); - } else { - out_be32(mdmact_port, JCHDCTxtbl[offset][idx]); - out_be32(mcrcst_port, JCSTWTxtbl[offset][idx]); - out_be32(tdvhsel_port, - (in_be32(tdvhsel_port) & ~TDVHSEL_MASTER) | JCACTSELtbl[offset][idx]); - } - out_be32(udenvt_port, - JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]); -} - -unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask) -{ - /* errata A308 workaround: limit ATAPI UDMA mode to UDMA4 */ - if (adev->class == ATA_DEV_ATAPI && - (mask & (0xE0 << ATA_SHIFT_UDMA))) { - printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME); - mask &= ~(0xE0 << ATA_SHIFT_UDMA); - } - return mask; -} - -/** - * scc_tf_load - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Note: Original code is ata_sff_tf_load(). - */ - -static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - out_be32(ioaddr->ctl_addr, tf->ctl); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - out_be32(ioaddr->feature_addr, tf->hob_feature); - out_be32(ioaddr->nsect_addr, tf->hob_nsect); - out_be32(ioaddr->lbal_addr, tf->hob_lbal); - out_be32(ioaddr->lbam_addr, tf->hob_lbam); - out_be32(ioaddr->lbah_addr, tf->hob_lbah); - VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", - tf->hob_feature, - tf->hob_nsect, - tf->hob_lbal, - tf->hob_lbam, - tf->hob_lbah); - } - - if (is_addr) { - out_be32(ioaddr->feature_addr, tf->feature); - out_be32(ioaddr->nsect_addr, tf->nsect); - out_be32(ioaddr->lbal_addr, tf->lbal); - out_be32(ioaddr->lbam_addr, tf->lbam); - out_be32(ioaddr->lbah_addr, tf->lbah); - VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", - tf->feature, - tf->nsect, - tf->lbal, - tf->lbam, - tf->lbah); - } - - if (tf->flags & ATA_TFLAG_DEVICE) { - out_be32(ioaddr->device_addr, tf->device); - VPRINTK("device 0x%X\n", tf->device); - } - - ata_wait_idle(ap); -} - -/** - * scc_check_status - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Note: Original code is ata_check_status(). - */ - -static u8 scc_check_status (struct ata_port *ap) -{ - return in_be32(ap->ioaddr.status_addr); -} - -/** - * scc_tf_read - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Note: Original code is ata_sff_tf_read(). - */ - -static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - tf->command = scc_check_status(ap); - tf->feature = in_be32(ioaddr->error_addr); - tf->nsect = in_be32(ioaddr->nsect_addr); - tf->lbal = in_be32(ioaddr->lbal_addr); - tf->lbam = in_be32(ioaddr->lbam_addr); - tf->lbah = in_be32(ioaddr->lbah_addr); - tf->device = in_be32(ioaddr->device_addr); - - if (tf->flags & ATA_TFLAG_LBA48) { - out_be32(ioaddr->ctl_addr, tf->ctl | ATA_HOB); - tf->hob_feature = in_be32(ioaddr->error_addr); - tf->hob_nsect = in_be32(ioaddr->nsect_addr); - tf->hob_lbal = in_be32(ioaddr->lbal_addr); - tf->hob_lbam = in_be32(ioaddr->lbam_addr); - tf->hob_lbah = in_be32(ioaddr->lbah_addr); - out_be32(ioaddr->ctl_addr, tf->ctl); - ap->last_ctl = tf->ctl; - } -} - -/** - * scc_exec_command - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Note: Original code is ata_sff_exec_command(). - */ - -static void scc_exec_command (struct ata_port *ap, - const struct ata_taskfile *tf) -{ - DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); - - out_be32(ap->ioaddr.command_addr, tf->command); - ata_sff_pause(ap); -} - -/** - * scc_check_altstatus - Read device alternate status reg - * @ap: port where the device is - */ - -static u8 scc_check_altstatus (struct ata_port *ap) -{ - return in_be32(ap->ioaddr.altstatus_addr); -} - -/** - * scc_dev_select - Select device 0/1 on ATA bus - * @ap: ATA channel to manipulate - * @device: ATA device (numbered from zero) to select - * - * Note: Original code is ata_sff_dev_select(). - */ - -static void scc_dev_select (struct ata_port *ap, unsigned int device) -{ - u8 tmp; - - if (device == 0) - tmp = ATA_DEVICE_OBS; - else - tmp = ATA_DEVICE_OBS | ATA_DEV1; - - out_be32(ap->ioaddr.device_addr, tmp); - ata_sff_pause(ap); -} - -/** - * scc_set_devctl - Write device control reg - * @ap: port where the device is - * @ctl: value to write - */ - -static void scc_set_devctl(struct ata_port *ap, u8 ctl) -{ - out_be32(ap->ioaddr.ctl_addr, ctl); -} - -/** - * scc_bmdma_setup - Set up PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * Note: Original code is ata_bmdma_setup(). - */ - -static void scc_bmdma_setup (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - u8 dmactl; - void __iomem *mmio = ap->ioaddr.bmdma_addr; - - /* load PRD table addr */ - out_be32(mmio + SCC_DMA_TABLE_OFS, ap->bmdma_prd_dma); - - /* specify data direction, triple-check start bit is clear */ - dmactl = in_be32(mmio + SCC_DMA_CMD); - dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); - if (!rw) - dmactl |= ATA_DMA_WR; - out_be32(mmio + SCC_DMA_CMD, dmactl); - - /* issue r/w command */ - ap->ops->sff_exec_command(ap, &qc->tf); -} - -/** - * scc_bmdma_start - Start a PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * Note: Original code is ata_bmdma_start(). - */ - -static void scc_bmdma_start (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - u8 dmactl; - void __iomem *mmio = ap->ioaddr.bmdma_addr; - - /* start host DMA transaction */ - dmactl = in_be32(mmio + SCC_DMA_CMD); - out_be32(mmio + SCC_DMA_CMD, dmactl | ATA_DMA_START); -} - -/** - * scc_devchk - PATA device presence detection - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) - * - * Note: Original code is ata_devchk(). - */ - -static unsigned int scc_devchk (struct ata_port *ap, - unsigned int device) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - u8 nsect, lbal; - - ap->ops->sff_dev_select(ap, device); - - out_be32(ioaddr->nsect_addr, 0x55); - out_be32(ioaddr->lbal_addr, 0xaa); - - out_be32(ioaddr->nsect_addr, 0xaa); - out_be32(ioaddr->lbal_addr, 0x55); - - out_be32(ioaddr->nsect_addr, 0x55); - out_be32(ioaddr->lbal_addr, 0xaa); - - nsect = in_be32(ioaddr->nsect_addr); - lbal = in_be32(ioaddr->lbal_addr); - - if ((nsect == 0x55) && (lbal == 0xaa)) - return 1; /* we found a device */ - - return 0; /* nothing found */ -} - -/** - * scc_wait_after_reset - wait for devices to become ready after reset - * - * Note: Original code is ata_sff_wait_after_reset - */ - -static int scc_wait_after_reset(struct ata_link *link, unsigned int devmask, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int dev0 = devmask & (1 << 0); - unsigned int dev1 = devmask & (1 << 1); - int rc, ret = 0; - - /* Spec mandates ">= 2ms" before checking status. We wait - * 150ms, because that was the magic delay used for ATAPI - * devices in Hale Landis's ATADRVR, for the period of time - * between when the ATA command register is written, and then - * status is checked. Because waiting for "a while" before - * checking status is fine, post SRST, we perform this magic - * delay here as well. - * - * Old drivers/ide uses the 2mS rule and then waits for ready. - */ - ata_msleep(ap, 150); - - /* always check readiness of the master device */ - rc = ata_sff_wait_ready(link, deadline); - /* -ENODEV means the odd clown forgot the D7 pulldown resistor - * and TF status is 0xff, bail out on it too. - */ - if (rc) - return rc; - - /* if device 1 was found in ata_devchk, wait for register - * access briefly, then wait for BSY to clear. - */ - if (dev1) { - int i; - - ap->ops->sff_dev_select(ap, 1); - - /* Wait for register access. Some ATAPI devices fail - * to set nsect/lbal after reset, so don't waste too - * much time on it. We're gonna wait for !BSY anyway. - */ - for (i = 0; i < 2; i++) { - u8 nsect, lbal; - - nsect = in_be32(ioaddr->nsect_addr); - lbal = in_be32(ioaddr->lbal_addr); - if ((nsect == 1) && (lbal == 1)) - break; - ata_msleep(ap, 50); /* give drive a breather */ - } - - rc = ata_sff_wait_ready(link, deadline); - if (rc) { - if (rc != -ENODEV) - return rc; - ret = rc; - } - } - - /* is all this really necessary? */ - ap->ops->sff_dev_select(ap, 0); - if (dev1) - ap->ops->sff_dev_select(ap, 1); - if (dev0) - ap->ops->sff_dev_select(ap, 0); - - return ret; -} - -/** - * scc_bus_softreset - PATA device software reset - * - * Note: Original code is ata_bus_softreset(). - */ - -static int scc_bus_softreset(struct ata_port *ap, unsigned int devmask, - unsigned long deadline) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - DPRINTK("ata%u: bus reset via SRST\n", ap->print_id); - - /* software reset. causes dev0 to be selected */ - out_be32(ioaddr->ctl_addr, ap->ctl); - udelay(20); - out_be32(ioaddr->ctl_addr, ap->ctl | ATA_SRST); - udelay(20); - out_be32(ioaddr->ctl_addr, ap->ctl); - - return scc_wait_after_reset(&ap->link, devmask, deadline); -} - -/** - * scc_softreset - reset host port via ATA SRST - * @ap: port to reset - * @classes: resulting classes of attached devices - * @deadline: deadline jiffies for the operation - * - * Note: Original code is ata_sff_softreset(). - */ - -static int scc_softreset(struct ata_link *link, unsigned int *classes, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; - unsigned int devmask = 0; - int rc; - u8 err; - - DPRINTK("ENTER\n"); - - /* determine if device 0/1 are present */ - if (scc_devchk(ap, 0)) - devmask |= (1 << 0); - if (slave_possible && scc_devchk(ap, 1)) - devmask |= (1 << 1); - - /* select device 0 again */ - ap->ops->sff_dev_select(ap, 0); - - /* issue bus reset */ - DPRINTK("about to softreset, devmask=%x\n", devmask); - rc = scc_bus_softreset(ap, devmask, deadline); - if (rc) { - ata_port_err(ap, "SRST failed (err_mask=0x%x)\n", rc); - return -EIO; - } - - /* determine by signature whether we have ATA or ATAPI devices */ - classes[0] = ata_sff_dev_classify(&ap->link.device[0], - devmask & (1 << 0), &err); - if (slave_possible && err != 0x81) - classes[1] = ata_sff_dev_classify(&ap->link.device[1], - devmask & (1 << 1), &err); - - DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); - return 0; -} - -/** - * scc_bmdma_stop - Stop PCI IDE BMDMA transfer - * @qc: Command we are ending DMA for - */ - -static void scc_bmdma_stop (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR]; - void __iomem *bmid_base = ap->host->iomap[SCC_BMID_BAR]; - u32 reg; - - while (1) { - reg = in_be32(bmid_base + SCC_DMA_INTST); - - if (reg & INTSTS_SERROR) { - printk(KERN_WARNING "%s: SERROR\n", DRV_NAME); - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_SERROR|INTSTS_BMSINT); - out_be32(bmid_base + SCC_DMA_CMD, - in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); - continue; - } - - if (reg & INTSTS_PRERR) { - u32 maea0, maec0; - maea0 = in_be32(ctrl_base + SCC_CTL_MAEA0); - maec0 = in_be32(ctrl_base + SCC_CTL_MAEC0); - printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", DRV_NAME, maea0, maec0); - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_PRERR|INTSTS_BMSINT); - out_be32(bmid_base + SCC_DMA_CMD, - in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); - continue; - } - - if (reg & INTSTS_RERR) { - printk(KERN_WARNING "%s: Response Error\n", DRV_NAME); - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_RERR|INTSTS_BMSINT); - out_be32(bmid_base + SCC_DMA_CMD, - in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); - continue; - } - - if (reg & INTSTS_ICERR) { - out_be32(bmid_base + SCC_DMA_CMD, - in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); - printk(KERN_WARNING "%s: Illegal Configuration\n", DRV_NAME); - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ICERR|INTSTS_BMSINT); - continue; - } - - if (reg & INTSTS_BMSINT) { - unsigned int classes; - unsigned long deadline = ata_deadline(jiffies, ATA_TMOUT_BOOT); - printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME); - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT); - /* TBD: SW reset */ - scc_softreset(&ap->link, &classes, deadline); - continue; - } - - if (reg & INTSTS_BMHE) { - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMHE); - continue; - } - - if (reg & INTSTS_ACTEINT) { - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ACTEINT); - continue; - } - - if (reg & INTSTS_IOIRQS) { - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_IOIRQS); - continue; - } - break; - } - - /* clear start/stop bit */ - out_be32(bmid_base + SCC_DMA_CMD, - in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); - - /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_sff_dma_pause(ap); /* dummy read */ -} - -/** - * scc_bmdma_status - Read PCI IDE BMDMA status - * @ap: Port associated with this ATA transaction. - */ - -static u8 scc_bmdma_status (struct ata_port *ap) -{ - void __iomem *mmio = ap->ioaddr.bmdma_addr; - u8 host_stat = in_be32(mmio + SCC_DMA_STATUS); - u32 int_status = in_be32(mmio + SCC_DMA_INTST); - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); - static int retry = 0; - - /* return if IOS_SS is cleared */ - if (!(in_be32(mmio + SCC_DMA_CMD) & ATA_DMA_START)) - return host_stat; - - /* errata A252,A308 workaround: Step4 */ - if ((scc_check_altstatus(ap) & ATA_ERR) - && (int_status & INTSTS_INTRQ)) - return (host_stat | ATA_DMA_INTR); - - /* errata A308 workaround Step5 */ - if (int_status & INTSTS_IOIRQS) { - host_stat |= ATA_DMA_INTR; - - /* We don't check ATAPI DMA because it is limited to UDMA4 */ - if ((qc->tf.protocol == ATA_PROT_DMA && - qc->dev->xfer_mode > XFER_UDMA_4)) { - if (!(int_status & INTSTS_ACTEINT)) { - printk(KERN_WARNING "ata%u: operation failed (transfer data loss)\n", - ap->print_id); - host_stat |= ATA_DMA_ERR; - if (retry++) - ap->udma_mask &= ~(1 << qc->dev->xfer_mode); - } else - retry = 0; - } - } - - return host_stat; -} - -/** - * scc_data_xfer - Transfer data by PIO - * @dev: device for this I/O - * @buf: data buffer - * @buflen: buffer length - * @rw: read/write - * - * Note: Original code is ata_sff_data_xfer(). - */ - -static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf, - unsigned int buflen, int rw) -{ - struct ata_port *ap = dev->link->ap; - unsigned int words = buflen >> 1; - unsigned int i; - __le16 *buf16 = (__le16 *) buf; - void __iomem *mmio = ap->ioaddr.data_addr; - - /* Transfer multiple of 2 bytes */ - if (rw == READ) - for (i = 0; i < words; i++) - buf16[i] = cpu_to_le16(in_be32(mmio)); - else - for (i = 0; i < words; i++) - out_be32(mmio, le16_to_cpu(buf16[i])); - - /* Transfer trailing 1 byte, if any. */ - if (unlikely(buflen & 0x01)) { - __le16 align_buf[1] = { 0 }; - unsigned char *trailing_buf = buf + buflen - 1; - - if (rw == READ) { - align_buf[0] = cpu_to_le16(in_be32(mmio)); - memcpy(trailing_buf, align_buf, 1); - } else { - memcpy(align_buf, trailing_buf, 1); - out_be32(mmio, le16_to_cpu(align_buf[0])); - } - words++; - } - - return words << 1; -} - -/** - * scc_postreset - standard postreset callback - * @ap: the target ata_port - * @classes: classes of attached devices - * - * Note: Original code is ata_sff_postreset(). - */ - -static void scc_postreset(struct ata_link *link, unsigned int *classes) -{ - struct ata_port *ap = link->ap; - - DPRINTK("ENTER\n"); - - /* is double-select really necessary? */ - if (classes[0] != ATA_DEV_NONE) - ap->ops->sff_dev_select(ap, 1); - if (classes[1] != ATA_DEV_NONE) - ap->ops->sff_dev_select(ap, 0); - - /* bail out if no device is present */ - if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { - DPRINTK("EXIT, no device\n"); - return; - } - - /* set up device control */ - out_be32(ap->ioaddr.ctl_addr, ap->ctl); - - DPRINTK("EXIT\n"); -} - -/** - * scc_irq_clear - Clear PCI IDE BMDMA interrupt. - * @ap: Port associated with this ATA transaction. - * - * Note: Original code is ata_bmdma_irq_clear(). - */ - -static void scc_irq_clear (struct ata_port *ap) -{ - void __iomem *mmio = ap->ioaddr.bmdma_addr; - - if (!mmio) - return; - - out_be32(mmio + SCC_DMA_STATUS, in_be32(mmio + SCC_DMA_STATUS)); -} - -/** - * scc_port_start - Set port up for dma. - * @ap: Port to initialize - * - * Allocate space for PRD table using ata_bmdma_port_start(). - * Set PRD table address for PTERADD. (PRD Transfer End Read) - */ - -static int scc_port_start (struct ata_port *ap) -{ - void __iomem *mmio = ap->ioaddr.bmdma_addr; - int rc; - - rc = ata_bmdma_port_start(ap); - if (rc) - return rc; - - out_be32(mmio + SCC_DMA_PTERADD, ap->bmdma_prd_dma); - return 0; -} - -/** - * scc_port_stop - Undo scc_port_start() - * @ap: Port to shut down - * - * Reset PTERADD. - */ - -static void scc_port_stop (struct ata_port *ap) -{ - void __iomem *mmio = ap->ioaddr.bmdma_addr; - - out_be32(mmio + SCC_DMA_PTERADD, 0); -} - -static struct scsi_host_template scc_sht = { - ATA_BMDMA_SHT(DRV_NAME), -}; - -static struct ata_port_operations scc_pata_ops = { - .inherits = &ata_bmdma_port_ops, - - .set_piomode = scc_set_piomode, - .set_dmamode = scc_set_dmamode, - .mode_filter = scc_mode_filter, - - .sff_tf_load = scc_tf_load, - .sff_tf_read = scc_tf_read, - .sff_exec_command = scc_exec_command, - .sff_check_status = scc_check_status, - .sff_check_altstatus = scc_check_altstatus, - .sff_dev_select = scc_dev_select, - .sff_set_devctl = scc_set_devctl, - - .bmdma_setup = scc_bmdma_setup, - .bmdma_start = scc_bmdma_start, - .bmdma_stop = scc_bmdma_stop, - .bmdma_status = scc_bmdma_status, - .sff_data_xfer = scc_data_xfer, - - .cable_detect = ata_cable_80wire, - .softreset = scc_softreset, - .postreset = scc_postreset, - - .sff_irq_clear = scc_irq_clear, - - .port_start = scc_port_start, - .port_stop = scc_port_stop, -}; - -static struct ata_port_info scc_port_info[] = { - { - .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = ATA_PIO4, - /* No MWDMA */ - .udma_mask = ATA_UDMA6, - .port_ops = &scc_pata_ops, - }, -}; - -/** - * scc_reset_controller - initialize SCC PATA controller. - */ - -static int scc_reset_controller(struct ata_host *host) -{ - void __iomem *ctrl_base = host->iomap[SCC_CTRL_BAR]; - void __iomem *bmid_base = host->iomap[SCC_BMID_BAR]; - void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL; - void __iomem *mode_port = ctrl_base + SCC_CTL_MODEREG; - void __iomem *ecmode_port = ctrl_base + SCC_CTL_ECMODE; - void __iomem *intmask_port = bmid_base + SCC_DMA_INTMASK; - void __iomem *dmastatus_port = bmid_base + SCC_DMA_STATUS; - u32 reg = 0; - - out_be32(cckctrl_port, reg); - reg |= CCKCTRL_ATACLKOEN; - out_be32(cckctrl_port, reg); - reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN; - out_be32(cckctrl_port, reg); - reg |= CCKCTRL_CRST; - out_be32(cckctrl_port, reg); - - for (;;) { - reg = in_be32(cckctrl_port); - if (reg & CCKCTRL_CRST) - break; - udelay(5000); - } - - reg |= CCKCTRL_ATARESET; - out_be32(cckctrl_port, reg); - out_be32(ecmode_port, ECMODE_VALUE); - out_be32(mode_port, MODE_JCUSFEN); - out_be32(intmask_port, INTMASK_MSK); - - if (in_be32(dmastatus_port) & QCHSD_STPDIAG) { - printk(KERN_WARNING "%s: failed to detect 80c cable. (PDIAG# is high)\n", DRV_NAME); - return -EIO; - } - - return 0; -} - -/** - * scc_setup_ports - initialize ioaddr with SCC PATA port offsets. - * @ioaddr: IO address structure to be initialized - * @base: base address of BMID region - */ - -static void scc_setup_ports (struct ata_ioports *ioaddr, void __iomem *base) -{ - ioaddr->cmd_addr = base + SCC_REG_CMD_ADDR; - ioaddr->altstatus_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS; - ioaddr->ctl_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS; - ioaddr->bmdma_addr = base; - ioaddr->data_addr = ioaddr->cmd_addr + SCC_REG_DATA; - ioaddr->error_addr = ioaddr->cmd_addr + SCC_REG_ERR; - ioaddr->feature_addr = ioaddr->cmd_addr + SCC_REG_FEATURE; - ioaddr->nsect_addr = ioaddr->cmd_addr + SCC_REG_NSECT; - ioaddr->lbal_addr = ioaddr->cmd_addr + SCC_REG_LBAL; - ioaddr->lbam_addr = ioaddr->cmd_addr + SCC_REG_LBAM; - ioaddr->lbah_addr = ioaddr->cmd_addr + SCC_REG_LBAH; - ioaddr->device_addr = ioaddr->cmd_addr + SCC_REG_DEVICE; - ioaddr->status_addr = ioaddr->cmd_addr + SCC_REG_STATUS; - ioaddr->command_addr = ioaddr->cmd_addr + SCC_REG_CMD; -} - -static int scc_host_init(struct ata_host *host) -{ - struct pci_dev *pdev = to_pci_dev(host->dev); - int rc; - - rc = scc_reset_controller(host); - if (rc) - return rc; - - rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK); - if (rc) - return rc; - rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK); - if (rc) - return rc; - - scc_setup_ports(&host->ports[0]->ioaddr, host->iomap[SCC_BMID_BAR]); - - pci_set_master(pdev); - - return 0; -} - -/** - * scc_init_one - Register SCC PATA device with kernel services - * @pdev: PCI device to register - * @ent: Entry in scc_pci_tbl matching with @pdev - * - * LOCKING: - * Inherited from PCI layer (may sleep). - * - * RETURNS: - * Zero on success, or -ERRNO value. - */ - -static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - unsigned int board_idx = (unsigned int) ent->driver_data; - const struct ata_port_info *ppi[] = { &scc_port_info[board_idx], NULL }; - struct ata_host *host; - int rc; - - ata_print_version_once(&pdev->dev, DRV_VERSION); - - host = ata_host_alloc_pinfo(&pdev->dev, ppi, 1); - if (!host) - return -ENOMEM; - - rc = pcim_enable_device(pdev); - if (rc) - return rc; - - rc = pcim_iomap_regions(pdev, (1 << SCC_CTRL_BAR) | (1 << SCC_BMID_BAR), DRV_NAME); - if (rc == -EBUSY) - pcim_pin_device(pdev); - if (rc) - return rc; - host->iomap = pcim_iomap_table(pdev); - - ata_port_pbar_desc(host->ports[0], SCC_CTRL_BAR, -1, "ctrl"); - ata_port_pbar_desc(host->ports[0], SCC_BMID_BAR, -1, "bmid"); - - rc = scc_host_init(host); - if (rc) - return rc; - - return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, - IRQF_SHARED, &scc_sht); -} - -static struct pci_driver scc_pci_driver = { - .name = DRV_NAME, - .id_table = scc_pci_tbl, - .probe = scc_init_one, - .remove = ata_pci_remove_one, -#ifdef CONFIG_PM_SLEEP - .suspend = ata_pci_device_suspend, - .resume = ata_pci_device_resume, -#endif -}; - -module_pci_driver(scc_pci_driver); - -MODULE_AUTHOR("Toshiba corp"); -MODULE_DESCRIPTION("SCSI low-level driver for Toshiba SCC PATA controller"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, scc_pci_tbl); -MODULE_VERSION(DRV_VERSION); |