diff options
Diffstat (limited to 'drivers/ata/pata_parport/fit2.c')
| -rw-r--r-- | drivers/ata/pata_parport/fit2.c | 151 |
1 files changed, 151 insertions, 0 deletions
diff --git a/drivers/ata/pata_parport/fit2.c b/drivers/ata/pata_parport/fit2.c new file mode 100644 index 000000000000..3c7a1069b026 --- /dev/null +++ b/drivers/ata/pata_parport/fit2.c @@ -0,0 +1,151 @@ +/* + fit2.c (c) 1998 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + fit2.c is a low-level protocol driver for the older version + of the Fidelity International Technology parallel port adapter. + This adapter is used in their TransDisk 2000 and older TransDisk + 3000 portable hard-drives. As far as I can tell, this device + supports 4-bit mode _only_. + + Newer models of the FIT products use an enhanced protocol. + The "fit3" protocol module should support current drives. + +*/ + +#define FIT2_VERSION "1.0" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <asm/io.h> + +#include <linux/pata_parport.h> + +#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0)) + +/* cont = 0 - access the IDE register file + cont = 1 - access the IDE command set + +NB: The FIT adapter does not appear to use the control registers. +So, we map ALT_STATUS to STATUS and NO-OP writes to the device +control register - this means that IDE reset will not work on these +devices. + +*/ + +static void fit2_write_regr( PIA *pi, int cont, int regr, int val) + +{ if (cont == 1) return; + w2(0xc); w0(regr); w2(4); w0(val); w2(5); w0(0); w2(4); +} + +static int fit2_read_regr( PIA *pi, int cont, int regr ) + +{ int a, b, r; + + if (cont) { + if (regr != 6) return 0xff; + r = 7; + } else r = regr + 0x10; + + w2(0xc); w0(r); w2(4); w2(5); + w0(0); a = r1(); + w0(1); b = r1(); + w2(4); + + return j44(a,b); + +} + +static void fit2_read_block( PIA *pi, char * buf, int count ) + +{ int k, a, b, c, d; + + w2(0xc); w0(0x10); + + for (k=0;k<count/4;k++) { + + w2(4); w2(5); + w0(0); a = r1(); w0(1); b = r1(); + w0(3); c = r1(); w0(2); d = r1(); + buf[4*k+0] = j44(a,b); + buf[4*k+1] = j44(d,c); + + w2(4); w2(5); + a = r1(); w0(3); b = r1(); + w0(1); c = r1(); w0(0); d = r1(); + buf[4*k+2] = j44(d,c); + buf[4*k+3] = j44(a,b); + + } + + w2(4); + +} + +static void fit2_write_block( PIA *pi, char * buf, int count ) + +{ int k; + + + w2(0xc); w0(0); + for (k=0;k<count/2;k++) { + w2(4); w0(buf[2*k]); + w2(5); w0(buf[2*k+1]); + } + w2(4); +} + +static void fit2_connect ( PIA *pi ) + +{ pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + w2(0xcc); +} + +static void fit2_disconnect ( PIA *pi ) + +{ w0(pi->saved_r0); + w2(pi->saved_r2); +} + +static void fit2_log_adapter( PIA *pi, char * scratch, int verbose ) + +{ printk("%s: fit2 %s, FIT 2000 adapter at 0x%x, delay %d\n", + pi->device,FIT2_VERSION,pi->port,pi->delay); + +} + +static struct pi_protocol fit2 = { + .owner = THIS_MODULE, + .name = "fit2", + .max_mode = 1, + .epp_first = 2, + .default_delay = 1, + .max_units = 1, + .write_regr = fit2_write_regr, + .read_regr = fit2_read_regr, + .write_block = fit2_write_block, + .read_block = fit2_read_block, + .connect = fit2_connect, + .disconnect = fit2_disconnect, + .log_adapter = fit2_log_adapter, +}; + +static int __init fit2_init(void) +{ + return paride_register(&fit2); +} + +static void __exit fit2_exit(void) +{ + paride_unregister(&fit2); +} + +MODULE_LICENSE("GPL"); +module_init(fit2_init) +module_exit(fit2_exit) |