diff options
Diffstat (limited to 'drivers/ata/libata-core.c')
| -rw-r--r-- | drivers/ata/libata-core.c | 48 |
1 files changed, 44 insertions, 4 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 3c1f8830ac8b..0abd72d0dec2 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -93,8 +93,8 @@ static int ata_probe_timeout = ATA_TMOUT_INTERNAL / HZ; module_param(ata_probe_timeout, int, 0444); MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)"); -int noacpi; -module_param(noacpi, int, 0444); +int libata_noacpi = 1; +module_param_named(noacpi, libata_noacpi, int, 0444); MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in suspend/resume when set"); MODULE_AUTHOR("Jeff Garzik"); @@ -826,7 +826,7 @@ static u64 ata_id_n_sectors(const u16 *id) /** * ata_id_to_dma_mode - Identify DMA mode from id block * @dev: device to identify - * @mode: mode to assume if we cannot tell + * @unknown: mode to assume if we cannot tell * * Set up the timing values for the device based upon the identify * reported values for the DMA mode. This function is used by drivers @@ -1784,6 +1784,13 @@ int ata_dev_configure(struct ata_device *dev) dev->max_sectors = ATA_MAX_SECTORS; } + if (ata_device_blacklisted(dev) & ATA_HORKAGE_MAX_SEC_128) + dev->max_sectors = min(ATA_MAX_SECTORS_128, dev->max_sectors); + + /* limit ATAPI DMA to R/W commands only */ + if (ata_device_blacklisted(dev) & ATA_HORKAGE_DMA_RW_ONLY) + dev->horkage |= ATA_HORKAGE_DMA_RW_ONLY; + if (ap->ops->dev_config) ap->ops->dev_config(ap, dev); @@ -3352,6 +3359,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA }, { "SAMSUNG CD-ROM SN-124","N001", ATA_HORKAGE_NODMA }, + /* Weird ATAPI devices */ + { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 | + ATA_HORKAGE_DMA_RW_ONLY }, + /* Devices we expect to fail diagnostics */ /* Devices where NCQ should be avoided */ @@ -3359,6 +3370,15 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ }, /* http://thread.gmane.org/gmane.linux.ide/14907 */ { "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ }, + /* NCQ is broken */ + { "Maxtor 6L250S0", "BANC1G10", ATA_HORKAGE_NONCQ }, + /* NCQ hard hangs device under heavier load, needs hard power cycle */ + { "Maxtor 6B250S0", "BANC1B70", ATA_HORKAGE_NONCQ }, + /* Blacklist entries taken from Silicon Image 3124/3132 + Windows driver .inf file - also several Linux problem reports */ + { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, }, + { "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, }, + { "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, }, /* Devices with NCQ limits */ @@ -3670,6 +3690,26 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; int rc = 0; /* Assume ATAPI DMA is OK by default */ + /* some drives can only do ATAPI DMA on read/write */ + if (unlikely(qc->dev->horkage & ATA_HORKAGE_DMA_RW_ONLY)) { + struct scsi_cmnd *cmd = qc->scsicmd; + u8 *scsicmd = cmd->cmnd; + + switch (scsicmd[0]) { + case READ_10: + case WRITE_10: + case READ_12: + case WRITE_12: + case READ_6: + case WRITE_6: + /* atapi dma maybe ok */ + break; + default: + /* turn off atapi dma */ + return 1; + } + } + if (ap->ops->check_atapi_dma) rc = ap->ops->check_atapi_dma(qc); @@ -4713,8 +4753,8 @@ static void fill_result_tf(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - ap->ops->tf_read(ap, &qc->result_tf); qc->result_tf.flags = qc->tf.flags; + ap->ops->tf_read(ap, &qc->result_tf); } /** |