diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/s390/include/asm/pci.h | 6 | ||||
-rw-r--r-- | arch/s390/kernel/perf_cpum_cf.c | 4 | ||||
-rw-r--r-- | arch/s390/pci/pci.c | 148 | ||||
-rw-r--r-- | arch/s390/pci/pci_event.c | 230 | ||||
-rw-r--r-- | arch/s390/pci/pci_insn.c | 4 | ||||
-rw-r--r-- | arch/s390/pci/pci_irq.c | 9 |
6 files changed, 387 insertions, 14 deletions
diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h index 6b3c366af78e..90824be5ce9a 100644 --- a/arch/s390/include/asm/pci.h +++ b/arch/s390/include/asm/pci.h @@ -210,9 +210,11 @@ int zpci_deconfigure_device(struct zpci_dev *zdev); void zpci_device_reserved(struct zpci_dev *zdev); bool zpci_is_device_configured(struct zpci_dev *zdev); +int zpci_hot_reset_device(struct zpci_dev *zdev); int zpci_register_ioat(struct zpci_dev *, u8, u64, u64, u64); int zpci_unregister_ioat(struct zpci_dev *, u8); void zpci_remove_reserved_devices(void); +void zpci_update_fh(struct zpci_dev *zdev, u32 fh); /* CLP */ int clp_setup_writeback_mio(void); @@ -294,8 +296,10 @@ void zpci_debug_exit(void); void zpci_debug_init_device(struct zpci_dev *, const char *); void zpci_debug_exit_device(struct zpci_dev *); -/* Error reporting */ +/* Error handling */ int zpci_report_error(struct pci_dev *, struct zpci_report_error_header *); +int zpci_clear_error_state(struct zpci_dev *zdev); +int zpci_reset_load_store_blocked(struct zpci_dev *zdev); #ifdef CONFIG_NUMA diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c index 6f431fa9e4d7..ee8707abdb6a 100644 --- a/arch/s390/kernel/perf_cpum_cf.c +++ b/arch/s390/kernel/perf_cpum_cf.c @@ -687,8 +687,10 @@ static void cpumf_pmu_stop(struct perf_event *event, int flags) false); if (cfdiag_diffctr(cpuhw, event->hw.config_base)) cfdiag_push_sample(event, cpuhw); - } else + } else if (cpuhw->flags & PMU_F_RESERVED) { + /* Only update when PMU not hotplugged off */ hw_perf_event_update(event); + } hwc->state |= PERF_HES_UPTODATE; } } diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c index 872d772b73d2..2f9b78fa82a5 100644 --- a/arch/s390/pci/pci.c +++ b/arch/s390/pci/pci.c @@ -481,6 +481,34 @@ static void zpci_free_iomap(struct zpci_dev *zdev, int entry) spin_unlock(&zpci_iomap_lock); } +static void zpci_do_update_iomap_fh(struct zpci_dev *zdev, u32 fh) +{ + int bar, idx; + + spin_lock(&zpci_iomap_lock); + for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) { + if (!zdev->bars[bar].size) + continue; + idx = zdev->bars[bar].map_idx; + if (!zpci_iomap_start[idx].count) + continue; + WRITE_ONCE(zpci_iomap_start[idx].fh, zdev->fh); + } + spin_unlock(&zpci_iomap_lock); +} + +void zpci_update_fh(struct zpci_dev *zdev, u32 fh) +{ + if (!fh || zdev->fh == fh) + return; + + zdev->fh = fh; + if (zpci_use_mio(zdev)) + return; + if (zdev->has_resources && zdev_enabled(zdev)) + zpci_do_update_iomap_fh(zdev, fh); +} + static struct resource *__alloc_res(struct zpci_dev *zdev, unsigned long start, unsigned long size, unsigned long flags) { @@ -668,7 +696,7 @@ int zpci_enable_device(struct zpci_dev *zdev) if (clp_enable_fh(zdev, &fh, ZPCI_NR_DMA_SPACES)) rc = -EIO; else - zdev->fh = fh; + zpci_update_fh(zdev, fh); return rc; } @@ -679,14 +707,14 @@ int zpci_disable_device(struct zpci_dev *zdev) cc = clp_disable_fh(zdev, &fh); if (!cc) { - zdev->fh = fh; + zpci_update_fh(zdev, fh); } else if (cc == CLP_RC_SETPCIFN_ALRDY) { pr_info("Disabling PCI function %08x had no effect as it was already disabled\n", zdev->fid); /* Function is already disabled - update handle */ rc = clp_refresh_fh(zdev->fid, &fh); if (!rc) { - zdev->fh = fh; + zpci_update_fh(zdev, fh); rc = -EINVAL; } } else { @@ -696,6 +724,65 @@ int zpci_disable_device(struct zpci_dev *zdev) } /** + * zpci_hot_reset_device - perform a reset of the given zPCI function + * @zdev: the slot which should be reset + * + * Performs a low level reset of the zPCI function. The reset is low level in + * the sense that the zPCI function can be reset without detaching it from the + * common PCI subsystem. The reset may be performed while under control of + * either DMA or IOMMU APIs in which case the existing DMA/IOMMU translation + * table is reinstated at the end of the reset. + * + * After the reset the functions internal state is reset to an initial state + * equivalent to its state during boot when first probing a driver. + * Consequently after reset the PCI function requires re-initialization via the + * common PCI code including re-enabling IRQs via pci_alloc_irq_vectors() + * and enabling the function via e.g.pci_enablde_device_flags().The caller + * must guard against concurrent reset attempts. + * + * In most cases this function should not be called directly but through + * pci_reset_function() or pci_reset_bus() which handle the save/restore and + * locking. + * + * Return: 0 on success and an error value otherwise + */ +int zpci_hot_reset_device(struct zpci_dev *zdev) +{ + int rc; + + zpci_dbg(3, "rst fid:%x, fh:%x\n", zdev->fid, zdev->fh); + if (zdev_enabled(zdev)) { + /* Disables device access, DMAs and IRQs (reset state) */ + rc = zpci_disable_device(zdev); + /* + * Due to a z/VM vs LPAR inconsistency in the error state the + * FH may indicate an enabled device but disable says the + * device is already disabled don't treat it as an error here. + */ + if (rc == -EINVAL) + rc = 0; + if (rc) + return rc; + } + + rc = zpci_enable_device(zdev); + if (rc) + return rc; + + if (zdev->dma_table) + rc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma, + (u64)zdev->dma_table); + else + rc = zpci_dma_init_device(zdev); + if (rc) { + zpci_disable_device(zdev); + return rc; + } + + return 0; +} + +/** * zpci_create_device() - Create a new zpci_dev and add it to the zbus * @fid: Function ID of the device to be created * @fh: Current Function Handle of the device to be created @@ -776,7 +863,7 @@ int zpci_scan_configured_device(struct zpci_dev *zdev, u32 fh) { int rc; - zdev->fh = fh; + zpci_update_fh(zdev, fh); /* the PCI function will be scanned once function 0 appears */ if (!zdev->zbus->bus) return 0; @@ -903,6 +990,59 @@ int zpci_report_error(struct pci_dev *pdev, } EXPORT_SYMBOL(zpci_report_error); +/** + * zpci_clear_error_state() - Clears the zPCI error state of the device + * @zdev: The zdev for which the zPCI error state should be reset + * + * Clear the zPCI error state of the device. If clearing the zPCI error state + * fails the device is left in the error state. In this case it may make sense + * to call zpci_io_perm_failure() on the associated pdev if it exists. + * + * Returns: 0 on success, -EIO otherwise + */ +int zpci_clear_error_state(struct zpci_dev *zdev) +{ + u64 req = ZPCI_CREATE_REQ(zdev->fh, 0, ZPCI_MOD_FC_RESET_ERROR); + struct zpci_fib fib = {0}; + u8 status; + int cc; + + cc = zpci_mod_fc(req, &fib, &status); + if (cc) { + zpci_dbg(3, "ces fid:%x, cc:%d, status:%x\n", zdev->fid, cc, status); + return -EIO; + } + + return 0; +} + +/** + * zpci_reset_load_store_blocked() - Re-enables L/S from error state + * @zdev: The zdev for which to unblock load/store access + * + * Re-enables load/store access for a PCI function in the error state while + * keeping DMA blocked. In this state drivers can poke MMIO space to determine + * if error recovery is possible while catching any rogue DMA access from the + * device. + * + * Returns: 0 on success, -EIO otherwise + */ +int zpci_reset_load_store_blocked(struct zpci_dev *zdev) +{ + u64 req = ZPCI_CREATE_REQ(zdev->fh, 0, ZPCI_MOD_FC_RESET_BLOCK); + struct zpci_fib fib = {0}; + u8 status; + int cc; + + cc = zpci_mod_fc(req, &fib, &status); + if (cc) { + zpci_dbg(3, "rls fid:%x, cc:%d, status:%x\n", zdev->fid, cc, status); + return -EIO; + } + + return 0; +} + static int zpci_mem_init(void) { BUILD_BUG_ON(!is_power_of_2(__alignof__(struct zpci_fmb)) || diff --git a/arch/s390/pci/pci_event.c b/arch/s390/pci/pci_event.c index 6a5bfa9dc1f2..2e3e5b278925 100644 --- a/arch/s390/pci/pci_event.c +++ b/arch/s390/pci/pci_event.c @@ -47,18 +47,223 @@ struct zpci_ccdf_avail { u16 pec; /* PCI event code */ } __packed; +static inline bool ers_result_indicates_abort(pci_ers_result_t ers_res) +{ + switch (ers_res) { + case PCI_ERS_RESULT_CAN_RECOVER: + case PCI_ERS_RESULT_RECOVERED: + case PCI_ERS_RESULT_NEED_RESET: + return false; + default: + return true; + } +} + +static bool is_passed_through(struct zpci_dev *zdev) +{ + return zdev->s390_domain; +} + +static bool is_driver_supported(struct pci_driver *driver) +{ + if (!driver || !driver->err_handler) + return false; + if (!driver->err_handler->error_detected) + return false; + if (!driver->err_handler->slot_reset) + return false; + if (!driver->err_handler->resume) + return false; + return true; +} + +static pci_ers_result_t zpci_event_notify_error_detected(struct pci_dev *pdev, + struct pci_driver *driver) +{ + pci_ers_result_t ers_res = PCI_ERS_RESULT_DISCONNECT; + + ers_res = driver->err_handler->error_detected(pdev, pdev->error_state); + if (ers_result_indicates_abort(ers_res)) + pr_info("%s: Automatic recovery failed after initial reporting\n", pci_name(pdev)); + else if (ers_res == PCI_ERS_RESULT_NEED_RESET) + pr_debug("%s: Driver needs reset to recover\n", pci_name(pdev)); + + return ers_res; +} + +static pci_ers_result_t zpci_event_do_error_state_clear(struct pci_dev *pdev, + struct pci_driver *driver) +{ + pci_ers_result_t ers_res = PCI_ERS_RESULT_DISCONNECT; + struct zpci_dev *zdev = to_zpci(pdev); + int rc; + + pr_info("%s: Unblocking device access for examination\n", pci_name(pdev)); + rc = zpci_reset_load_store_blocked(zdev); + if (rc) { + pr_err("%s: Unblocking device access failed\n", pci_name(pdev)); + /* Let's try a full reset instead */ + return PCI_ERS_RESULT_NEED_RESET; + } + + if (driver->err_handler->mmio_enabled) { + ers_res = driver->err_handler->mmio_enabled(pdev); + if (ers_result_indicates_abort(ers_res)) { + pr_info("%s: Automatic recovery failed after MMIO re-enable\n", + pci_name(pdev)); + return ers_res; + } else if (ers_res == PCI_ERS_RESULT_NEED_RESET) { + pr_debug("%s: Driver needs reset to recover\n", pci_name(pdev)); + return ers_res; + } + } + + pr_debug("%s: Unblocking DMA\n", pci_name(pdev)); + rc = zpci_clear_error_state(zdev); + if (!rc) { + pdev->error_state = pci_channel_io_normal; + } else { + pr_err("%s: Unblocking DMA failed\n", pci_name(pdev)); + /* Let's try a full reset instead */ + return PCI_ERS_RESULT_NEED_RESET; + } + + return ers_res; +} + +static pci_ers_result_t zpci_event_do_reset(struct pci_dev *pdev, + struct pci_driver *driver) +{ + pci_ers_result_t ers_res = PCI_ERS_RESULT_DISCONNECT; + + pr_info("%s: Initiating reset\n", pci_name(pdev)); + if (zpci_hot_reset_device(to_zpci(pdev))) { + pr_err("%s: The reset request failed\n", pci_name(pdev)); + return ers_res; + } + pdev->error_state = pci_channel_io_normal; + ers_res = driver->err_handler->slot_reset(pdev); + if (ers_result_indicates_abort(ers_res)) { + pr_info("%s: Automatic recovery failed after slot reset\n", pci_name(pdev)); + return ers_res; + } + + return ers_res; +} + +/* zpci_event_attempt_error_recovery - Try to recover the given PCI function + * @pdev: PCI function to recover currently in the error state + * + * We follow the scheme outlined in Documentation/PCI/pci-error-recovery.rst. + * With the simplification that recovery always happens per function + * and the platform determines which functions are affected for + * multi-function devices. + */ +static pci_ers_result_t zpci_event_attempt_error_recovery(struct pci_dev *pdev) +{ + pci_ers_result_t ers_res = PCI_ERS_RESULT_DISCONNECT; + struct pci_driver *driver; + + /* + * Ensure that the PCI function is not removed concurrently, no driver + * is unbound or probed and that userspace can't access its + * configuration space while we perform recovery. + */ + pci_dev_lock(pdev); + if (pdev->error_state == pci_channel_io_perm_failure) { + ers_res = PCI_ERS_RESULT_DISCONNECT; + goto out_unlock; + } + pdev->error_state = pci_channel_io_frozen; + + if (is_passed_through(to_zpci(pdev))) { + pr_info("%s: Cannot be recovered in the host because it is a pass-through device\n", + pci_name(pdev)); + goto out_unlock; + } + + driver = to_pci_driver(pdev->dev.driver); + if (!is_driver_supported(driver)) { + if (!driver) + pr_info("%s: Cannot be recovered because no driver is bound to the device\n", + pci_name(pdev)); + else + pr_info("%s: The %s driver bound to the device does not support error recovery\n", + pci_name(pdev), + driver->name); + goto out_unlock; + } + + ers_res = zpci_event_notify_error_detected(pdev, driver); + if (ers_result_indicates_abort(ers_res)) + goto out_unlock; + + if (ers_res == PCI_ERS_RESULT_CAN_RECOVER) { + ers_res = zpci_event_do_error_state_clear(pdev, driver); + if (ers_result_indicates_abort(ers_res)) + goto out_unlock; + } + + if (ers_res == PCI_ERS_RESULT_NEED_RESET) + ers_res = zpci_event_do_reset(pdev, driver); + + if (ers_res != PCI_ERS_RESULT_RECOVERED) { + pr_err("%s: Automatic recovery failed; operator intervention is required\n", + pci_name(pdev)); + goto out_unlock; + } + + pr_info("%s: The device is ready to resume operations\n", pci_name(pdev)); + if (driver->err_handler->resume) + driver->err_handler->resume(pdev); +out_unlock: + pci_dev_unlock(pdev); + + return ers_res; +} + +/* zpci_event_io_failure - Report PCI channel failure state to driver + * @pdev: PCI function for which to report + * @es: PCI channel failure state to report + */ +static void zpci_event_io_failure(struct pci_dev *pdev, pci_channel_state_t es) +{ + struct pci_driver *driver; + + pci_dev_lock(pdev); + pdev->error_state = es; + /** + * While vfio-pci's error_detected callback notifies user-space QEMU + * reacts to this by freezing the guest. In an s390 environment PCI + * errors are rarely fatal so this is overkill. Instead in the future + * we will inject the error event and let the guest recover the device + * itself. + */ + if (is_passed_through(to_zpci(pdev))) + goto out; + driver = to_pci_driver(pdev->dev.driver); + if (driver && driver->err_handler && driver->err_handler->error_detected) + driver->err_handler->error_detected(pdev, pdev->error_state); +out: + pci_dev_unlock(pdev); +} + static void __zpci_event_error(struct zpci_ccdf_err *ccdf) { struct zpci_dev *zdev = get_zdev_by_fid(ccdf->fid); struct pci_dev *pdev = NULL; + pci_ers_result_t ers_res; zpci_dbg(3, "err fid:%x, fh:%x, pec:%x\n", ccdf->fid, ccdf->fh, ccdf->pec); zpci_err("error CCDF:\n"); zpci_err_hex(ccdf, sizeof(*ccdf)); - if (zdev) - pdev = pci_get_slot(zdev->zbus->bus, zdev->devfn); + if (zdev) { + zpci_update_fh(zdev, ccdf->fh); + if (zdev->zbus->bus) + pdev = pci_get_slot(zdev->zbus->bus, zdev->devfn); + } pr_err("%s: Event 0x%x reports an error for PCI function 0x%x\n", pdev ? pci_name(pdev) : "n/a", ccdf->pec, ccdf->fid); @@ -66,7 +271,20 @@ static void __zpci_event_error(struct zpci_ccdf_err *ccdf) if (!pdev) return; - pdev->error_state = pci_channel_io_perm_failure; + switch (ccdf->pec) { + case 0x003a: /* Service Action or Error Recovery Successful */ + ers_res = zpci_event_attempt_error_recovery(pdev); + if (ers_res != PCI_ERS_RESULT_RECOVERED) + zpci_event_io_failure(pdev, pci_channel_io_perm_failure); + break; + default: + /* + * Mark as frozen not permanently failed because the device + * could be subsequently recovered by the platform. + */ + zpci_event_io_failure(pdev, pci_channel_io_frozen); + break; + } pci_dev_put(pdev); } @@ -78,7 +296,7 @@ void zpci_event_error(void *data) static void zpci_event_hard_deconfigured(struct zpci_dev *zdev, u32 fh) { - zdev->fh = fh; + zpci_update_fh(zdev, fh); /* Give the driver a hint that the function is * already unusable. */ @@ -121,7 +339,7 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf) if (!zdev) zpci_create_device(ccdf->fid, ccdf->fh, ZPCI_FN_STATE_STANDBY); else - zdev->fh = ccdf->fh; + zpci_update_fh(zdev, ccdf->fh); break; case 0x0303: /* Deconfiguration requested */ if (zdev) { @@ -130,7 +348,7 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf) */ if (zdev->state != ZPCI_FN_STATE_CONFIGURED) break; - zdev->fh = ccdf->fh; + zpci_update_fh(zdev, ccdf->fh); zpci_deconfigure_device(zdev); } break; diff --git a/arch/s390/pci/pci_insn.c b/arch/s390/pci/pci_insn.c index 2e43996159f0..28d863aaafea 100644 --- a/arch/s390/pci/pci_insn.c +++ b/arch/s390/pci/pci_insn.c @@ -163,7 +163,7 @@ static inline int zpci_load_fh(u64 *data, const volatile void __iomem *addr, unsigned long len) { struct zpci_iomap_entry *entry = &zpci_iomap_start[ZPCI_IDX(addr)]; - u64 req = ZPCI_CREATE_REQ(entry->fh, entry->bar, len); + u64 req = ZPCI_CREATE_REQ(READ_ONCE(entry->fh), entry->bar, len); return __zpci_load(data, req, ZPCI_OFFSET(addr)); } @@ -244,7 +244,7 @@ static inline int zpci_store_fh(const volatile void __iomem *addr, u64 data, unsigned long len) { struct zpci_iomap_entry *entry = &zpci_iomap_start[ZPCI_IDX(addr)]; - u64 req = ZPCI_CREATE_REQ(entry->fh, entry->bar, len); + u64 req = ZPCI_CREATE_REQ(READ_ONCE(entry->fh), entry->bar, len); return __zpci_store(data, req, ZPCI_OFFSET(addr)); } diff --git a/arch/s390/pci/pci_irq.c b/arch/s390/pci/pci_irq.c index 3823e159bf74..954bb7a83124 100644 --- a/arch/s390/pci/pci_irq.c +++ b/arch/s390/pci/pci_irq.c @@ -387,6 +387,15 @@ void arch_teardown_msi_irqs(struct pci_dev *pdev) airq_iv_free(zpci_ibv[0], zdev->msi_first_bit, zdev->msi_nr_irqs); } +void arch_restore_msi_irqs(struct pci_dev *pdev) +{ + struct zpci_dev *zdev = to_zpci(pdev); + + if (!zdev->irqs_registered) + zpci_set_irq(zdev); + default_restore_msi_irqs(pdev); +} + static struct airq_struct zpci_airq = { .handler = zpci_floating_irq_handler, .isc = PCI_ISC, |