diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 3 | ||||
| -rw-r--r-- | arch/mips/lantiq/xway/reset.c | 36 |
2 files changed, 39 insertions, 0 deletions
diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h index 6a2df709c576..133336b493b6 100644 --- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h +++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h @@ -82,6 +82,9 @@ extern __iomem void *ltq_cgu_membase; #define LTQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000) #define LTQ_MPS_CHIPID ((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344)) +/* allow booting xrx200 phys */ +int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr); + /* request a non-gpio and set the PIO config */ #define PMU_PPE BIT(13) extern void ltq_pmu_enable(unsigned int module); diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c index 2799212ab7db..544dbb7fb421 100644 --- a/arch/mips/lantiq/xway/reset.c +++ b/arch/mips/lantiq/xway/reset.c @@ -28,9 +28,15 @@ #define RCU_RST_REQ 0x0010 /* reset status register */ #define RCU_RST_STAT 0x0014 +/* vr9 gphy registers */ +#define RCU_GFS_ADD0_XRX200 0x0020 +#define RCU_GFS_ADD1_XRX200 0x0068 /* reboot bit */ +#define RCU_RD_GPHY0_XRX200 BIT(31) #define RCU_RD_SRST BIT(30) +#define RCU_RD_GPHY1_XRX200 BIT(29) + /* reset cause */ #define RCU_STAT_SHIFT 26 /* boot selection */ @@ -60,6 +66,36 @@ unsigned char ltq_boot_select(void) return RCU_BOOT_SEL(val); } +/* reset / boot a gphy */ +static struct ltq_xrx200_gphy_reset { + u32 rd; + u32 addr; +} xrx200_gphy[] = { + {RCU_RD_GPHY0_XRX200, RCU_GFS_ADD0_XRX200}, + {RCU_RD_GPHY1_XRX200, RCU_GFS_ADD1_XRX200}, +}; + +/* reset and boot a gphy. these phys only exist on xrx200 SoC */ +int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr) +{ + if (!of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) { + dev_err(dev, "this SoC has no GPHY\n"); + return -EINVAL; + } + if (id > 1) { + dev_err(dev, "%u is an invalid gphy id\n", id); + return -EINVAL; + } + dev_info(dev, "booting GPHY%u firmware at %X\n", id, dev_addr); + + ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | xrx200_gphy[id].rd, + RCU_RST_REQ); + ltq_rcu_w32(dev_addr, xrx200_gphy[id].addr); + ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~xrx200_gphy[id].rd, + RCU_RST_REQ); + return 0; +} + /* reset a io domain for u micro seconds */ void ltq_reset_once(unsigned int module, ulong u) { |