summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/avr32/boards/atngw100/Kconfig27
-rw-r--r--arch/avr32/boards/atngw100/Kconfig_mrmt80
-rw-r--r--arch/avr32/boards/atngw100/Makefile1
-rw-r--r--arch/avr32/boards/atngw100/mrmt.c373
-rw-r--r--arch/avr32/boards/atngw100/setup.c5
-rw-r--r--arch/avr32/boards/merisc/setup.c7
-rw-r--r--arch/avr32/boards/mimc200/setup.c29
-rw-r--r--arch/avr32/configs/atngw100_mrmt_defconfig1363
-rw-r--r--arch/avr32/include/asm/hw_irq.h2
-rw-r--r--arch/avr32/kernel/traps.c11
-rw-r--r--arch/avr32/mach-at32ap/include/mach/board.h2
-rw-r--r--arch/frv/include/asm/signal.h123
-rw-r--r--arch/x86/Kconfig45
-rw-r--r--arch/x86/crypto/Makefile2
-rw-r--r--arch/x86/crypto/aesni-intel_glue.c267
-rw-r--r--arch/x86/crypto/fpu.c166
-rw-r--r--arch/x86/include/asm/entry_arch.h11
-rw-r--r--arch/x86/include/asm/hardirq.h2
-rw-r--r--arch/x86/include/asm/hw_irq.h2
-rw-r--r--arch/x86/include/asm/irq_vectors.h17
-rw-r--r--arch/x86/include/asm/mce.h88
-rw-r--r--arch/x86/include/asm/msr-index.h7
-rw-r--r--arch/x86/kernel/apic/apic.c4
-rw-r--r--arch/x86/kernel/apic/nmi.c2
-rw-r--r--arch/x86/kernel/cpu/mcheck/Makefile10
-rw-r--r--arch/x86/kernel/cpu/mcheck/k7.c42
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce-inject.c127
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce-internal.h15
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce-severity.c218
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce.c1964
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce.h26
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce_32.c76
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce_64.c1188
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce_amd_64.c203
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce_intel.c74
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce_intel_64.c65
-rw-r--r--arch/x86/kernel/cpu/mcheck/non-fatal.c57
-rw-r--r--arch/x86/kernel/cpu/mcheck/p4.c86
-rw-r--r--arch/x86/kernel/cpu/mcheck/p5.c48
-rw-r--r--arch/x86/kernel/cpu/mcheck/p6.c26
-rw-r--r--arch/x86/kernel/cpu/mcheck/therm_throt.c73
-rw-r--r--arch/x86/kernel/cpu/mcheck/threshold.c2
-rw-r--r--arch/x86/kernel/cpu/mcheck/winchip.c17
-rw-r--r--arch/x86/kernel/entry_64.S11
-rw-r--r--arch/x86/kernel/irq.c19
-rw-r--r--arch/x86/kernel/irqinit.c3
-rw-r--r--arch/x86/kernel/signal.c6
-rw-r--r--arch/x86/kernel/smp.c28
-rw-r--r--arch/x86/kernel/traps.c6
49 files changed, 5223 insertions, 1803 deletions
diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig
index b3f99477bbeb..be27a0218ab4 100644
--- a/arch/avr32/boards/atngw100/Kconfig
+++ b/arch/avr32/boards/atngw100/Kconfig
@@ -2,8 +2,15 @@
if BOARD_ATNGW100
+choice
+ prompt "Select an NGW100 add-on board to support"
+ default BOARD_ATNGW100_ADDON_NONE
+
+config BOARD_ATNGW100_ADDON_NONE
+ bool "None"
+
config BOARD_ATNGW100_EVKLCD10X
- bool "Add support for EVKLCD10X addon board"
+ bool "EVKLCD10X addon board"
help
This enables support for the EVKLCD100 (QVGA) or EVKLCD101 (VGA)
addon board for the NGW100. By enabling this the LCD controller and
@@ -14,7 +21,19 @@ config BOARD_ATNGW100_EVKLCD10X
The MCI pins can be reenabled by editing the "add device function" but
this may break the setup for other displays that use these pins.
- Choose 'Y' here if you have a EVKLCD100/101 connected to the NGW100.
+config BOARD_ATNGW100_MRMT
+ bool "Mediama RMT1/2 add-on board"
+ help
+ This enables support for the Mediama RMT1 or RMT2 board.
+ RMT provides LCD support, AC97 codec and other
+ optional peripherals to the Atmel NGW100.
+
+ This choice disables the detect pin and the write-protect pin for the
+ MCI platform device, since it conflicts with the LCD platform device.
+ The MCI pins can be reenabled by editing the "add device function" but
+ this may break the setup for other displays that use these pins.
+
+endchoice
choice
prompt "LCD panel resolution on EVKLCD10X"
@@ -32,4 +51,8 @@ config BOARD_ATNGW100_EVKLCD10X_POW_QVGA
endchoice
+if BOARD_ATNGW100_MRMT
+source "arch/avr32/boards/atngw100/Kconfig_mrmt"
+endif
+
endif # BOARD_ATNGW100
diff --git a/arch/avr32/boards/atngw100/Kconfig_mrmt b/arch/avr32/boards/atngw100/Kconfig_mrmt
new file mode 100644
index 000000000000..9a199a207f3c
--- /dev/null
+++ b/arch/avr32/boards/atngw100/Kconfig_mrmt
@@ -0,0 +1,80 @@
+# RMT for NGW100 customization
+
+choice
+ prompt "RMT Version"
+ help
+ Select the RMTx board version.
+
+config BOARD_MRMT_REV1
+ bool "RMT1"
+config BOARD_MRMT_REV2
+ bool "RMT2"
+
+endchoice
+
+config BOARD_MRMT_AC97
+ bool "Enable AC97 CODEC"
+ help
+ Enable the UCB1400 AC97 CODEC driver.
+
+choice
+ prompt "Touchscreen Driver"
+ default BOARD_MRMT_ADS7846_TS
+
+config BOARD_MRMT_UCB1400_TS
+ bool "Use UCB1400 Touchscreen"
+
+config BOARD_MRMT_ADS7846_TS
+ bool "Use ADS7846 Touchscreen"
+
+endchoice
+
+choice
+ prompt "RMTx LCD Selection"
+ default BOARD_MRMT_LCD_DISABLE
+
+config BOARD_MRMT_LCD_DISABLE
+ bool "LCD Disabled"
+
+config BOARD_MRMT_LCD_LQ043T3DX0X
+ bool "Sharp LQ043T3DX0x or compatible"
+ help
+ If using RMT2, be sure to load the resistor pack selectors accordingly
+
+if BOARD_MRMT_REV2
+config BOARD_MRMT_LCD_KWH043GM08
+ bool "Formike KWH043GM08 or compatible"
+ help
+ Be sure to load the RMT2 resistor pack selectors accordingly
+endif
+
+endchoice
+
+if !BOARD_MRMT_LCD_DISABLE
+config BOARD_MRMT_BL_PWM
+ bool "Use PWM control for LCD Backlight"
+ help
+ Use PWM driver for controlling LCD Backlight.
+ Otherwise, LCD Backlight is always on.
+endif
+
+config BOARD_MRMT_RTC_I2C
+ bool "Use External RTC on I2C Bus"
+ help
+ RMT1 has an optional RTC device on the I2C bus.
+ It is a SII S35390A. Be sure to select the
+ matching RTC driver.
+
+choice
+ prompt "Wireless Module on ttyS2"
+ default BOARD_MRMT_WIRELESS_ZB
+
+config BOARD_MRMT_WIRELESS_ZB
+ bool "Use ZigBee/802.15.4 Module"
+
+config BOARD_MRMT_WIRELESS_BT
+ bool "Use Bluetooth (HCI) Module"
+
+config BOARD_MRMT_WIRELESS_NONE
+ bool "Not Installed"
+endchoice
diff --git a/arch/avr32/boards/atngw100/Makefile b/arch/avr32/boards/atngw100/Makefile
index 6376f5322e4d..f4ebe42a8254 100644
--- a/arch/avr32/boards/atngw100/Makefile
+++ b/arch/avr32/boards/atngw100/Makefile
@@ -1,2 +1,3 @@
obj-y += setup.o flash.o
obj-$(CONFIG_BOARD_ATNGW100_EVKLCD10X) += evklcd10x.o
+obj-$(CONFIG_BOARD_ATNGW100_MRMT) += mrmt.o
diff --git a/arch/avr32/boards/atngw100/mrmt.c b/arch/avr32/boards/atngw100/mrmt.c
new file mode 100644
index 000000000000..bf78e516a85f
--- /dev/null
+++ b/arch/avr32/boards/atngw100/mrmt.c
@@ -0,0 +1,373 @@
+/*
+ * Board-specific setup code for Remote Media Terminal 1 (RMT1)
+ * add-on board for the ATNGW100 Network Gateway
+ *
+ * Copyright (C) 2008 Mediama Technologies
+ * Based on ATNGW100 Network Gateway (Copyright (C) Atmel)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/linkage.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/atmel_serial.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <video/atmel_lcdc.h>
+#include <sound/atmel-ac97c.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
+
+/* Define board-specifoic GPIO assignments */
+#define PIN_LCD_BL GPIO_PIN_PA(28)
+#define PWM_CH_BL 0 /* Must match with GPIO pin definition */
+#define PIN_LCD_DISP GPIO_PIN_PA(31)
+#define PIN_AC97_RST_N GPIO_PIN_PA(30)
+#define PB_EXTINT_BASE 25
+#define TS_IRQ 0
+#define PIN_TS_EXTINT GPIO_PIN_PB(PB_EXTINT_BASE+TS_IRQ)
+#define PIN_PB_LEFT GPIO_PIN_PB(11)
+#define PIN_PB_RIGHT GPIO_PIN_PB(12)
+#define PIN_PWR_SW_N GPIO_PIN_PB(14)
+#define PIN_PWR_ON GPIO_PIN_PB(13)
+#define PIN_ZB_RST_N GPIO_PIN_PA(21)
+#define PIN_BT_RST GPIO_PIN_PA(22)
+#define PIN_LED_SYS GPIO_PIN_PA(16)
+#define PIN_LED_A GPIO_PIN_PA(19)
+#define PIN_LED_B GPIO_PIN_PE(19)
+
+#ifdef CONFIG_BOARD_MRMT_LCD_LQ043T3DX0X
+/* Sharp LQ043T3DX0x (or compatible) panel */
+static struct fb_videomode __initdata lcd_fb_modes[] = {
+ {
+ .name = "480x272 @ 59.94Hz",
+ .refresh = 59.94,
+ .xres = 480, .yres = 272,
+ .pixclock = KHZ2PICOS(9000),
+
+ .left_margin = 2, .right_margin = 2,
+ .upper_margin = 3, .lower_margin = 9,
+ .hsync_len = 41, .vsync_len = 1,
+
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+};
+
+static struct fb_monspecs __initdata lcd_fb_default_monspecs = {
+ .manufacturer = "SHA",
+ .monitor = "LQ043T3DX02",
+ .modedb = lcd_fb_modes,
+ .modedb_len = ARRAY_SIZE(lcd_fb_modes),
+ .hfmin = 14915,
+ .hfmax = 17638,
+ .vfmin = 53,
+ .vfmax = 61,
+ .dclkmax = 9260000,
+};
+
+static struct atmel_lcdfb_info __initdata rmt_lcdc_data = {
+ .default_bpp = 24,
+ .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+ .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+ | ATMEL_LCDC_INVCLK_NORMAL
+ | ATMEL_LCDC_MEMOR_BIG),
+ .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
+ .default_monspecs = &lcd_fb_default_monspecs,
+ .guard_time = 2,
+};
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_LCD_KWH043GM08
+/* Sharp KWH043GM08-Fxx (or compatible) panel */
+static struct fb_videomode __initdata lcd_fb_modes[] = {
+ {
+ .name = "480x272 @ 59.94Hz",
+ .refresh = 59.94,
+ .xres = 480, .yres = 272,
+ .pixclock = KHZ2PICOS(9000),
+
+ .left_margin = 2, .right_margin = 2,
+ .upper_margin = 3, .lower_margin = 9,
+ .hsync_len = 41, .vsync_len = 1,
+
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+};
+
+static struct fb_monspecs __initdata lcd_fb_default_monspecs = {
+ .manufacturer = "FOR",
+ .monitor = "KWH043GM08",
+ .modedb = lcd_fb_modes,
+ .modedb_len = ARRAY_SIZE(lcd_fb_modes),
+ .hfmin = 14915,
+ .hfmax = 17638,
+ .vfmin = 53,
+ .vfmax = 61,
+ .dclkmax = 9260000,
+};
+
+static struct atmel_lcdfb_info __initdata rmt_lcdc_data = {
+ .default_bpp = 24,
+ .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+ .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+ | ATMEL_LCDC_INVCLK_INVERTED
+ | ATMEL_LCDC_MEMOR_BIG),
+ .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
+ .default_monspecs = &lcd_fb_default_monspecs,
+ .guard_time = 2,
+};
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_AC97
+static struct ac97c_platform_data __initdata ac97c0_data = {
+ .reset_pin = PIN_AC97_RST_N,
+};
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_UCB1400_TS
+/* NOTE: IRQ assignment relies on kernel module parameter */
+static struct platform_device rmt_ts_device = {
+ .name = "ucb1400_ts",
+ .id = -1,
+ }
+};
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_BL_PWM
+/* PWM LEDs: LCD Backlight, etc */
+static struct gpio_led rmt_pwm_led[] = {
+ /* here the "gpio" is actually a PWM channel */
+ { .name = "backlight", .gpio = PWM_CH_BL, },
+};
+
+static struct gpio_led_platform_data rmt_pwm_led_data = {
+ .num_leds = ARRAY_SIZE(rmt_pwm_led),
+ .leds = rmt_pwm_led,
+};
+
+static struct platform_device rmt_pwm_led_dev = {
+ .name = "leds-atmel-pwm",
+ .id = -1,
+ .dev = {
+ .platform_data = &rmt_pwm_led_data,
+ },
+};
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_ADS7846_TS
+static int ads7846_pendown_state(void)
+{
+ return !gpio_get_value( PIN_TS_EXTINT ); /* PENIRQ.*/
+}
+
+static struct ads7846_platform_data ads_info = {
+ .model = 7846,
+ .keep_vref_on = 0, /* Use external VREF pin */
+ .vref_delay_usecs = 0,
+ .vref_mv = 3300, /* VREF = 3.3V */
+ .settle_delay_usecs = 800,
+ .penirq_recheck_delay_usecs = 800,
+ .x_plate_ohms = 750,
+ .y_plate_ohms = 300,
+ .pressure_max = 4096,
+ .debounce_max = 1,
+ .debounce_rep = 0,
+ .debounce_tol = (~0),
+ .get_pendown_state = ads7846_pendown_state,
+ .filter = NULL,
+ .filter_init = NULL,
+};
+
+static struct spi_board_info spi01_board_info[] __initdata = {
+ {
+ .modalias = "ads7846",
+ .max_speed_hz = 31250*26,
+ .bus_num = 0,
+ .chip_select = 1,
+ .platform_data = &ads_info,
+ .irq = AT32_EXTINT(TS_IRQ),
+ },
+};
+#endif
+
+/* GPIO Keys: left, right, power, etc */
+static const struct gpio_keys_button rmt_gpio_keys_buttons[] = {
+ [0] = {
+ .type = EV_KEY,
+ .code = KEY_POWER,
+ .gpio = PIN_PWR_SW_N,
+ .active_low = 1,
+ .desc = "power button",
+ },
+ [1] = {
+ .type = EV_KEY,
+ .code = KEY_LEFT,
+ .gpio = PIN_PB_LEFT,
+ .active_low = 1,
+ .desc = "left button",
+ },
+ [2] = {
+ .type = EV_KEY,
+ .code = KEY_RIGHT,
+ .gpio = PIN_PB_RIGHT,
+ .active_low = 1,
+ .desc = "right button",
+ },
+};
+
+static const struct gpio_keys_platform_data rmt_gpio_keys_data = {
+ .nbuttons = ARRAY_SIZE(rmt_gpio_keys_buttons),
+ .buttons = (void *) rmt_gpio_keys_buttons,
+};
+
+static struct platform_device rmt_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = (void *) &rmt_gpio_keys_data,
+ }
+};
+
+#ifdef CONFIG_BOARD_MRMT_RTC_I2C
+static struct i2c_board_info __initdata mrmt1_i2c_rtc = {
+ I2C_BOARD_INFO("s35390a", 0x30),
+ .irq = 0,
+};
+#endif
+
+static void mrmt_power_off(void)
+{
+ /* PWR_ON=0 will force power off */
+ gpio_set_value( PIN_PWR_ON, 0 );
+}
+
+static int __init mrmt1_init(void)
+{
+ gpio_set_value( PIN_PWR_ON, 1 ); /* Ensure PWR_ON is enabled */
+
+ pm_power_off = mrmt_power_off;
+
+ /* Setup USARTS (other than console) */
+ at32_map_usart(2, 1, 0); /* USART 2: /dev/ttyS1, RMT1:DB9M */
+ at32_map_usart(3, 2, ATMEL_USART_RTS | ATMEL_USART_CTS);
+ /* USART 3: /dev/ttyS2, RMT1:Wireless, w/ RTS/CTS */
+ at32_add_device_usart(1);
+ at32_add_device_usart(2);
+
+ /* Select GPIO Key pins */
+ at32_select_gpio( PIN_PWR_SW_N, AT32_GPIOF_DEGLITCH);
+ at32_select_gpio( PIN_PB_LEFT, AT32_GPIOF_DEGLITCH);
+ at32_select_gpio( PIN_PB_RIGHT, AT32_GPIOF_DEGLITCH);
+ platform_device_register(&rmt_gpio_keys);
+
+#ifdef CONFIG_BOARD_MRMT_RTC_I2C
+ i2c_register_board_info(0, &mrmt1_i2c_rtc, 1);
+#endif
+
+#ifndef CONFIG_BOARD_MRMT_LCD_DISABLE
+ /* User "alternate" LCDC inferface on Port E & D */
+ /* NB: exclude LCDC_CC pin, as NGW100 reserves it for other use */
+ at32_add_device_lcdc(0, &rmt_lcdc_data,
+ fbmem_start, fbmem_size,
+ (ATMEL_LCDC_ALT_24BIT | ATMEL_LCDC_PE_DVAL ) );
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_AC97
+ at32_add_device_ac97c(0, &ac97c0_data, AC97C_BOTH);
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_ADS7846_TS
+ /* Select the Touchscreen interrupt pin mode */
+ at32_select_periph( GPIO_PIOB_BASE, 1 << (PB_EXTINT_BASE+TS_IRQ),
+ GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
+ set_irq_type( AT32_EXTINT(TS_IRQ), IRQ_TYPE_EDGE_FALLING );
+ spi_register_board_info(spi01_board_info,ARRAY_SIZE(spi01_board_info));
+#endif
+
+#ifdef CONFIG_BOARD_MRMT_UCB1400_TS
+ /* Select the Touchscreen interrupt pin mode */
+ at32_select_periph( GPIO_PIOB_BASE, 1 << (PB_EXTINT_BASE+TS_IRQ),
+ GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
+ platform_device_register(&rmt_ts_device);
+#endif
+
+ at32_select_gpio( PIN_LCD_DISP, AT32_GPIOF_OUTPUT );
+ gpio_request( PIN_LCD_DISP, "LCD_DISP" );
+ gpio_direction_output( PIN_LCD_DISP, 0 ); /* LCD DISP */
+#ifdef CONFIG_BOARD_MRMT_LCD_DISABLE
+ /* Keep Backlight and DISP off */
+ at32_select_gpio( PIN_LCD_BL, AT32_GPIOF_OUTPUT );
+ gpio_request( PIN_LCD_BL, "LCD_BL" );
+ gpio_direction_output( PIN_LCD_BL, 0 ); /* Backlight */
+#else
+ gpio_set_value( PIN_LCD_DISP, 1 ); /* DISP asserted first */
+#ifdef CONFIG_BOARD_MRMT_BL_PWM
+ /* Use PWM for Backlight controls */
+ at32_add_device_pwm(1 << PWM_CH_BL);
+ platform_device_register(&rmt_pwm_led_dev);
+#else
+ /* Backlight always on */
+ udelay( 1 );
+ at32_select_gpio( PIN_LCD_BL, AT32_GPIOF_OUTPUT );
+ gpio_request( PIN_LCD_BL, "LCD_BL" );
+ gpio_direction_output( PIN_LCD_BL, 1 );
+#endif
+#endif
+
+ /* Make sure BT and Zigbee modules in reset */
+ at32_select_gpio( PIN_BT_RST, AT32_GPIOF_OUTPUT );
+ gpio_request( PIN_BT_RST, "BT_RST" );
+ gpio_direction_output( PIN_BT_RST, 1 );
+ /* BT Module in Reset */
+
+ at32_select_gpio( PIN_ZB_RST_N, AT32_GPIOF_OUTPUT );
+ gpio_request( PIN_ZB_RST_N, "ZB_RST_N" );
+ gpio_direction_output( PIN_ZB_RST_N, 0 );
+ /* XBee Module in Reset */
+
+#ifdef CONFIG_BOARD_MRMT_WIRELESS_ZB
+ udelay( 1000 );
+ /* Unreset the XBee Module */
+ gpio_set_value( PIN_ZB_RST_N, 1 );
+#endif
+#ifdef CONFIG_BOARD_MRMT_WIRELESS_BT
+ udelay( 1000 );
+ /* Unreset the BT Module */
+ gpio_set_value( PIN_BT_RST, 0 );
+#endif
+
+ return 0;
+}
+arch_initcall(mrmt1_init);
+
+static int __init mrmt1_early_init(void)
+{
+ /* To maintain power-on signal in case boot loader did not already */
+ at32_select_gpio( PIN_PWR_ON, AT32_GPIOF_OUTPUT );
+ gpio_request( PIN_PWR_ON, "PIN_PWR_ON" );
+ gpio_direction_output( PIN_PWR_ON, 1 );
+
+ return 0;
+}
+core_initcall(mrmt1_early_init);
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index 5b022aad4bd9..bc299fbbeb4e 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -56,8 +56,13 @@ static struct spi_board_info spi0_board_info[] __initdata = {
static struct mci_platform_data __initdata mci0_data = {
.slot[0] = {
.bus_width = 4,
+#if defined(CONFIG_BOARD_ATNGW100_EVKLCD10X) || defined(CONFIG_BOARD_ATNGW100_MRMT1)
+ .detect_pin = GPIO_PIN_NONE,
+ .wp_pin = GPIO_PIN_NONE,
+#else
.detect_pin = GPIO_PIN_PC(25),
.wp_pin = GPIO_PIN_PE(0),
+#endif
},
};
diff --git a/arch/avr32/boards/merisc/setup.c b/arch/avr32/boards/merisc/setup.c
index 20b300cf105a..623b077594fc 100644
--- a/arch/avr32/boards/merisc/setup.c
+++ b/arch/avr32/boards/merisc/setup.c
@@ -94,9 +94,10 @@ static struct spi_board_info __initdata spi0_board_info[] = {
static struct mci_platform_data __initdata mci0_data = {
.slot[0] = {
- .bus_width = 4,
- .detect_pin = GPIO_PIN_PE(19),
- .wp_pin = GPIO_PIN_PE(20),
+ .bus_width = 4,
+ .detect_pin = GPIO_PIN_PE(19),
+ .wp_pin = GPIO_PIN_PE(20),
+ .detect_is_active_high = true,
},
};
diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c
index c1b2175b4fea..523d8e183bef 100644
--- a/arch/avr32/boards/mimc200/setup.c
+++ b/arch/avr32/boards/mimc200/setup.c
@@ -43,16 +43,16 @@ unsigned long at32_board_osc_rates[3] = {
/* Initialized by bootloader-specific startup code. */
struct tag *bootloader_tags __initdata;
-static struct fb_videomode __initdata tx14d14_modes[] = {
+static struct fb_videomode __initdata pt0434827_modes[] = {
{
- .name = "640x480 @ 60",
- .refresh = 60,
- .xres = 640, .yres = 480,
- .pixclock = KHZ2PICOS(11666),
+ .name = "480x272 @ 72",
+ .refresh = 72,
+ .xres = 480, .yres = 272,
+ .pixclock = KHZ2PICOS(10000),
- .left_margin = 80, .right_margin = 1,
- .upper_margin = 13, .lower_margin = 2,
- .hsync_len = 64, .vsync_len = 1,
+ .left_margin = 1, .right_margin = 1,
+ .upper_margin = 12, .lower_margin = 1,
+ .hsync_len = 42, .vsync_len = 1,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
@@ -60,14 +60,14 @@ static struct fb_videomode __initdata tx14d14_modes[] = {
};
static struct fb_monspecs __initdata mimc200_default_monspecs = {
- .manufacturer = "HIT",
- .monitor = "TX14D14VM1BAB",
- .modedb = tx14d14_modes,
- .modedb_len = ARRAY_SIZE(tx14d14_modes),
+ .manufacturer = "PT",
+ .monitor = "PT0434827-A401",
+ .modedb = pt0434827_modes,
+ .modedb_len = ARRAY_SIZE(pt0434827_modes),
.hfmin = 14820,
.hfmax = 22230,
.vfmin = 60,
- .vfmax = 73.3,
+ .vfmax = 85,
.dclkmax = 25200000,
};
@@ -228,7 +228,8 @@ static int __init mimc200_init(void)
i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
at32_add_device_lcdc(0, &mimc200_lcdc_data,
- fbmem_start, fbmem_size, 1);
+ fbmem_start, fbmem_size,
+ ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_CONTROL | ATMEL_LCDC_ALT_24B_DATA);
return 0;
}
diff --git a/arch/avr32/configs/atngw100_mrmt_defconfig b/arch/avr32/configs/atngw100_mrmt_defconfig
new file mode 100644
index 000000000000..17b030777d36
--- /dev/null
+++ b/arch/avr32/configs/atngw100_mrmt_defconfig
@@ -0,0 +1,1363 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc1
+# Wed Jun 3 00:24:53 2009
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type and features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7000=y
+# CONFIG_BOARD_ATSTK1000 is not set
+CONFIG_BOARD_ATNGW100=y
+# CONFIG_BOARD_HAMMERHEAD is not set
+# CONFIG_BOARD_FAVR_32 is not set
+# CONFIG_BOARD_MERISC is not set
+# CONFIG_BOARD_MIMC200 is not set
+# CONFIG_BOARD_ATNGW100_ADDON_NONE is not set
+# CONFIG_BOARD_ATNGW100_EVKLCD10X is not set
+CONFIG_BOARD_ATNGW100_MRMT=y
+CONFIG_BOARD_MRMT_REV1=y
+# CONFIG_BOARD_MRMT_REV2 is not set
+CONFIG_BOARD_MRMT_AC97=y
+# CONFIG_BOARD_MRMT_UCB1400_TS is not set
+CONFIG_BOARD_MRMT_ADS7846_TS=y
+# CONFIG_BOARD_MRMT_LCD_DISABLE is not set
+CONFIG_BOARD_MRMT_LCD_LQ043T3DX0X=y
+# CONFIG_BOARD_MRMT_LCD_KWH043GM08 is not set
+CONFIG_BOARD_MRMT_BL_PWM=y
+CONFIG_BOARD_MRMT_RTC_I2C=y
+CONFIG_BOARD_MRMT_WIRELESS_ZB=y
+# CONFIG_BOARD_MRMT_WIRELESS_BT is not set
+# CONFIG_BOARD_MRMT_WIRELESS_NONE is not set
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
+# CONFIG_HAVE_ARCH_BOOTMEM is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_OWNERSHIP_TRACE is not set
+# CONFIG_NMI_DEBUGGING is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_CMDLINE=""
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+# CONFIG_BT_SCO is not set
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+# CONFIG_BT_BNEP is not set
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=y
+# CONFIG_ATMEL_TCLIB is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=m
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_ATMEL_LCDC is not set
+# CONFIG_BACKLIGHT_ATMEL_PWM is not set
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+# CONFIG_SND_ATMEL_ABDAC is not set
+CONFIG_SND_ATMEL_AC97C=m
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_APPLE is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=m
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
+# CONFIG_MMC_ATMELMCI_DMA is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_ATMEL_PWM=y
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_S35390A=m
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=m
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/avr32/include/asm/hw_irq.h b/arch/avr32/include/asm/hw_irq.h
index 218b0a6bfd1b..a36f9fcb8fcd 100644
--- a/arch/avr32/include/asm/hw_irq.h
+++ b/arch/avr32/include/asm/hw_irq.h
@@ -1,7 +1,7 @@
#ifndef __ASM_AVR32_HW_IRQ_H
#define __ASM_AVR32_HW_IRQ_H
-static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i)
+static inline void hw_resend_irq(struct irq_chip *h, unsigned int i)
{
/* Nothing to do */
}
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index d547c8df157d..6e3d491184ea 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -75,8 +75,17 @@ void _exception(long signr, struct pt_regs *regs, int code,
{
siginfo_t info;
- if (!user_mode(regs))
+ if (!user_mode(regs)) {
+ const struct exception_table_entry *fixup;
+
+ /* Are we prepared to handle this kernel fault? */
+ fixup = search_exception_tables(regs->pc);
+ if (fixup) {
+ regs->pc = fixup->fixup;
+ return;
+ }
die("Unhandled exception in kernel mode", regs, signr);
+ }
memset(&info, 0, sizeof(info));
info.si_signo = signr;
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index 0b8164281899..ddedb471f33e 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -29,7 +29,7 @@ extern struct platform_device *atmel_default_console_device;
/* Flags for selecting USART extra pins */
#define ATMEL_USART_RTS 0x01
#define ATMEL_USART_CTS 0x02
-#define ATMEL_USART_CLK 0x03
+#define ATMEL_USART_CLK 0x04
struct atmel_uart_data {
short use_dma_tx; /* use transmit DMA? */
diff --git a/arch/frv/include/asm/signal.h b/arch/frv/include/asm/signal.h
index 2079197d483d..f071e813dcb3 100644
--- a/arch/frv/include/asm/signal.h
+++ b/arch/frv/include/asm/signal.h
@@ -3,107 +3,15 @@
#include <linux/types.h>
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
- is taken to make libc match. */
-
-#define _NSIG 64
-#define _NSIG_BPW 32
-#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
+#ifndef __KERNEL__
/* Here we must cater to libcs that poke about in kernel headers. */
#define NSIG 32
typedef unsigned long sigset_t;
-#endif /* __KERNEL__ */
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/*
-#define SIGLOST 29
-*/
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX (_NSIG-1)
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001
-#define SA_NOCLDWAIT 0x00000002 /* not supported yet */
-#define SA_SIGINFO 0x00000004
-#define SA_ONSTACK 0x08000000
-#define SA_RESTART 0x10000000
-#define SA_NODEFER 0x40000000
-#define SA_RESETHAND 0x80000000
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-
-#define SA_RESTORER 0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
+#endif /* !__KERNEL__ */
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
+#define SA_RESTORER 0x04000000 /* to get struct sigaction correct */
#include <asm-generic/signal.h>
@@ -115,16 +23,6 @@ struct old_sigaction {
__sigrestore_t sa_restorer;
};
-struct sigaction {
- __sighandler_t sa_handler;
- unsigned long sa_flags;
- __sigrestore_t sa_restorer;
- sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
- struct sigaction sa;
-};
#else
/* Here we must cater to libcs that poke about in kernel headers. */
@@ -143,19 +41,4 @@ struct sigaction {
#endif /* __KERNEL__ */
-typedef struct sigaltstack {
- void __user *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#ifdef __KERNEL__
-
-#include <asm/sigcontext.h>
-#undef __HAVE_ARCH_SIG_BITOPS
-
-#endif /* __KERNEL__ */
-
#endif /* _ASM_SIGNAL_H */
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 68f5578fe38e..356d2ec8e2fb 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -789,10 +789,26 @@ config X86_MCE
to disable it. MCE support simply ignores non-MCE processors like
the 386 and 486, so nearly everyone can say Y here.
+config X86_OLD_MCE
+ depends on X86_32 && X86_MCE
+ bool "Use legacy machine check code (will go away)"
+ default n
+ select X86_ANCIENT_MCE
+ ---help---
+ Use the old i386 machine check code. This is merely intended for
+ testing in a transition period. Try this if you run into any machine
+ check related software problems, but report the problem to
+ linux-kernel. When in doubt say no.
+
+config X86_NEW_MCE
+ depends on X86_MCE
+ bool
+ default y if (!X86_OLD_MCE && X86_32) || X86_64
+
config X86_MCE_INTEL
def_bool y
prompt "Intel MCE features"
- depends on X86_64 && X86_MCE && X86_LOCAL_APIC
+ depends on X86_NEW_MCE && X86_LOCAL_APIC
---help---
Additional support for intel specific MCE features such as
the thermal monitor.
@@ -800,19 +816,36 @@ config X86_MCE_INTEL
config X86_MCE_AMD
def_bool y
prompt "AMD MCE features"
- depends on X86_64 && X86_MCE && X86_LOCAL_APIC
+ depends on X86_NEW_MCE && X86_LOCAL_APIC
---help---
Additional support for AMD specific MCE features such as
the DRAM Error Threshold.
+config X86_ANCIENT_MCE
+ def_bool n
+ depends on X86_32
+ prompt "Support for old Pentium 5 / WinChip machine checks"
+ ---help---
+ Include support for machine check handling on old Pentium 5 or WinChip
+ systems. These typically need to be enabled explicitely on the command
+ line.
+
config X86_MCE_THRESHOLD
depends on X86_MCE_AMD || X86_MCE_INTEL
bool
default y
+config X86_MCE_INJECT
+ depends on X86_NEW_MCE
+ tristate "Machine check injector support"
+ ---help---
+ Provide support for injecting machine checks for testing purposes.
+ If you don't know what a machine check is and you don't do kernel
+ QA it is safe to say n.
+
config X86_MCE_NONFATAL
tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
- depends on X86_32 && X86_MCE
+ depends on X86_OLD_MCE
---help---
Enabling this feature starts a timer that triggers every 5 seconds which
will look at the machine check registers to see if anything happened.
@@ -825,11 +858,15 @@ config X86_MCE_NONFATAL
config X86_MCE_P4THERMAL
bool "check for P4 thermal throttling interrupt."
- depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP)
+ depends on X86_OLD_MCE && X86_MCE && (X86_UP_APIC || SMP)
---help---
Enabling this feature will cause a message to be printed when the P4
enters thermal throttling.
+config X86_THERMAL_VECTOR
+ def_bool y
+ depends on X86_MCE_P4THERMAL || X86_MCE_INTEL
+
config VM86
bool "Enable VM86 support" if EMBEDDED
default y
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index ebe7deedd5b4..cfb0010fa940 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -2,6 +2,8 @@
# Arch-specific CryptoAPI modules.
#
+obj-$(CONFIG_CRYPTO_FPU) += fpu.o
+
obj-$(CONFIG_CRYPTO_AES_586) += aes-i586.o
obj-$(CONFIG_CRYPTO_TWOFISH_586) += twofish-i586.o
obj-$(CONFIG_CRYPTO_SALSA20_586) += salsa20-i586.o
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index 02af0af65497..4e663398f77f 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -21,6 +21,22 @@
#include <asm/i387.h>
#include <asm/aes.h>
+#if defined(CONFIG_CRYPTO_CTR) || defined(CONFIG_CRYPTO_CTR_MODULE)
+#define HAS_CTR
+#endif
+
+#if defined(CONFIG_CRYPTO_LRW) || defined(CONFIG_CRYPTO_LRW_MODULE)
+#define HAS_LRW
+#endif
+
+#if defined(CONFIG_CRYPTO_PCBC) || defined(CONFIG_CRYPTO_PCBC_MODULE)
+#define HAS_PCBC
+#endif
+
+#if defined(CONFIG_CRYPTO_XTS) || defined(CONFIG_CRYPTO_XTS_MODULE)
+#define HAS_XTS
+#endif
+
struct async_aes_ctx {
struct cryptd_ablkcipher *cryptd_tfm;
};
@@ -137,6 +153,41 @@ static struct crypto_alg aesni_alg = {
}
};
+static void __aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+ struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm));
+
+ aesni_enc(ctx, dst, src);
+}
+
+static void __aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+ struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm));
+
+ aesni_dec(ctx, dst, src);
+}
+
+static struct crypto_alg __aesni_alg = {
+ .cra_name = "__aes-aesni",
+ .cra_driver_name = "__driver-aes-aesni",
+ .cra_priority = 0,
+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct crypto_aes_ctx)+AESNI_ALIGN-1,
+ .cra_alignmask = 0,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(__aesni_alg.cra_list),
+ .cra_u = {
+ .cipher = {
+ .cia_min_keysize = AES_MIN_KEY_SIZE,
+ .cia_max_keysize = AES_MAX_KEY_SIZE,
+ .cia_setkey = aes_set_key,
+ .cia_encrypt = __aes_encrypt,
+ .cia_decrypt = __aes_decrypt
+ }
+ }
+};
+
static int ecb_encrypt(struct blkcipher_desc *desc,
struct scatterlist *dst, struct scatterlist *src,
unsigned int nbytes)
@@ -277,8 +328,16 @@ static int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key,
unsigned int key_len)
{
struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
+ struct crypto_ablkcipher *child = &ctx->cryptd_tfm->base;
+ int err;
- return crypto_ablkcipher_setkey(&ctx->cryptd_tfm->base, key, key_len);
+ crypto_ablkcipher_clear_flags(child, CRYPTO_TFM_REQ_MASK);
+ crypto_ablkcipher_set_flags(child, crypto_ablkcipher_get_flags(tfm)
+ & CRYPTO_TFM_REQ_MASK);
+ err = crypto_ablkcipher_setkey(child, key, key_len);
+ crypto_ablkcipher_set_flags(tfm, crypto_ablkcipher_get_flags(child)
+ & CRYPTO_TFM_RES_MASK);
+ return err;
}
static int ablk_encrypt(struct ablkcipher_request *req)
@@ -411,6 +470,163 @@ static struct crypto_alg ablk_cbc_alg = {
},
};
+#ifdef HAS_CTR
+static int ablk_ctr_init(struct crypto_tfm *tfm)
+{
+ struct cryptd_ablkcipher *cryptd_tfm;
+
+ cryptd_tfm = cryptd_alloc_ablkcipher("fpu(ctr(__driver-aes-aesni))",
+ 0, 0);
+ if (IS_ERR(cryptd_tfm))
+ return PTR_ERR(cryptd_tfm);
+ ablk_init_common(tfm, cryptd_tfm);
+ return 0;
+}
+
+static struct crypto_alg ablk_ctr_alg = {
+ .cra_name = "ctr(aes)",
+ .cra_driver_name = "ctr-aes-aesni",
+ .cra_priority = 400,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+ .cra_blocksize = 1,
+ .cra_ctxsize = sizeof(struct async_aes_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(ablk_ctr_alg.cra_list),
+ .cra_init = ablk_ctr_init,
+ .cra_exit = ablk_exit,
+ .cra_u = {
+ .ablkcipher = {
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = ablk_set_key,
+ .encrypt = ablk_encrypt,
+ .decrypt = ablk_decrypt,
+ .geniv = "chainiv",
+ },
+ },
+};
+#endif
+
+#ifdef HAS_LRW
+static int ablk_lrw_init(struct crypto_tfm *tfm)
+{
+ struct cryptd_ablkcipher *cryptd_tfm;
+
+ cryptd_tfm = cryptd_alloc_ablkcipher("fpu(lrw(__driver-aes-aesni))",
+ 0, 0);
+ if (IS_ERR(cryptd_tfm))
+ return PTR_ERR(cryptd_tfm);
+ ablk_init_common(tfm, cryptd_tfm);
+ return 0;
+}
+
+static struct crypto_alg ablk_lrw_alg = {
+ .cra_name = "lrw(aes)",
+ .cra_driver_name = "lrw-aes-aesni",
+ .cra_priority = 400,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct async_aes_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(ablk_lrw_alg.cra_list),
+ .cra_init = ablk_lrw_init,
+ .cra_exit = ablk_exit,
+ .cra_u = {
+ .ablkcipher = {
+ .min_keysize = AES_MIN_KEY_SIZE + AES_BLOCK_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE + AES_BLOCK_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = ablk_set_key,
+ .encrypt = ablk_encrypt,
+ .decrypt = ablk_decrypt,
+ },
+ },
+};
+#endif
+
+#ifdef HAS_PCBC
+static int ablk_pcbc_init(struct crypto_tfm *tfm)
+{
+ struct cryptd_ablkcipher *cryptd_tfm;
+
+ cryptd_tfm = cryptd_alloc_ablkcipher("fpu(pcbc(__driver-aes-aesni))",
+ 0, 0);
+ if (IS_ERR(cryptd_tfm))
+ return PTR_ERR(cryptd_tfm);
+ ablk_init_common(tfm, cryptd_tfm);
+ return 0;
+}
+
+static struct crypto_alg ablk_pcbc_alg = {
+ .cra_name = "pcbc(aes)",
+ .cra_driver_name = "pcbc-aes-aesni",
+ .cra_priority = 400,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct async_aes_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(ablk_pcbc_alg.cra_list),
+ .cra_init = ablk_pcbc_init,
+ .cra_exit = ablk_exit,
+ .cra_u = {
+ .ablkcipher = {
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = ablk_set_key,
+ .encrypt = ablk_encrypt,
+ .decrypt = ablk_decrypt,
+ },
+ },
+};
+#endif
+
+#ifdef HAS_XTS
+static int ablk_xts_init(struct crypto_tfm *tfm)
+{
+ struct cryptd_ablkcipher *cryptd_tfm;
+
+ cryptd_tfm = cryptd_alloc_ablkcipher("fpu(xts(__driver-aes-aesni))",
+ 0, 0);
+ if (IS_ERR(cryptd_tfm))
+ return PTR_ERR(cryptd_tfm);
+ ablk_init_common(tfm, cryptd_tfm);
+ return 0;
+}
+
+static struct crypto_alg ablk_xts_alg = {
+ .cra_name = "xts(aes)",
+ .cra_driver_name = "xts-aes-aesni",
+ .cra_priority = 400,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct async_aes_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(ablk_xts_alg.cra_list),
+ .cra_init = ablk_xts_init,
+ .cra_exit = ablk_exit,
+ .cra_u = {
+ .ablkcipher = {
+ .min_keysize = 2 * AES_MIN_KEY_SIZE,
+ .max_keysize = 2 * AES_MAX_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = ablk_set_key,
+ .encrypt = ablk_encrypt,
+ .decrypt = ablk_decrypt,
+ },
+ },
+};
+#endif
+
static int __init aesni_init(void)
{
int err;
@@ -421,6 +637,8 @@ static int __init aesni_init(void)
}
if ((err = crypto_register_alg(&aesni_alg)))
goto aes_err;
+ if ((err = crypto_register_alg(&__aesni_alg)))
+ goto __aes_err;
if ((err = crypto_register_alg(&blk_ecb_alg)))
goto blk_ecb_err;
if ((err = crypto_register_alg(&blk_cbc_alg)))
@@ -429,9 +647,41 @@ static int __init aesni_init(void)
goto ablk_ecb_err;
if ((err = crypto_register_alg(&ablk_cbc_alg)))
goto ablk_cbc_err;
+#ifdef HAS_CTR
+ if ((err = crypto_register_alg(&ablk_ctr_alg)))
+ goto ablk_ctr_err;
+#endif
+#ifdef HAS_LRW
+ if ((err = crypto_register_alg(&ablk_lrw_alg)))
+ goto ablk_lrw_err;
+#endif
+#ifdef HAS_PCBC
+ if ((err = crypto_register_alg(&ablk_pcbc_alg)))
+ goto ablk_pcbc_err;
+#endif
+#ifdef HAS_XTS
+ if ((err = crypto_register_alg(&ablk_xts_alg)))
+ goto ablk_xts_err;
+#endif
return err;
+#ifdef HAS_XTS
+ablk_xts_err:
+#endif
+#ifdef HAS_PCBC
+ crypto_unregister_alg(&ablk_pcbc_alg);
+ablk_pcbc_err:
+#endif
+#ifdef HAS_LRW
+ crypto_unregister_alg(&ablk_lrw_alg);
+ablk_lrw_err:
+#endif
+#ifdef HAS_CTR
+ crypto_unregister_alg(&ablk_ctr_alg);
+ablk_ctr_err:
+#endif
+ crypto_unregister_alg(&ablk_cbc_alg);
ablk_cbc_err:
crypto_unregister_alg(&ablk_ecb_alg);
ablk_ecb_err:
@@ -439,6 +689,8 @@ ablk_ecb_err:
blk_cbc_err:
crypto_unregister_alg(&blk_ecb_alg);
blk_ecb_err:
+ crypto_unregister_alg(&__aesni_alg);
+__aes_err:
crypto_unregister_alg(&aesni_alg);
aes_err:
return err;
@@ -446,10 +698,23 @@ aes_err:
static void __exit aesni_exit(void)
{
+#ifdef HAS_XTS
+ crypto_unregister_alg(&ablk_xts_alg);
+#endif
+#ifdef HAS_PCBC
+ crypto_unregister_alg(&ablk_pcbc_alg);
+#endif
+#ifdef HAS_LRW
+ crypto_unregister_alg(&ablk_lrw_alg);
+#endif
+#ifdef HAS_CTR
+ crypto_unregister_alg(&ablk_ctr_alg);
+#endif
crypto_unregister_alg(&ablk_cbc_alg);
crypto_unregister_alg(&ablk_ecb_alg);
crypto_unregister_alg(&blk_cbc_alg);
crypto_unregister_alg(&blk_ecb_alg);
+ crypto_unregister_alg(&__aesni_alg);
crypto_unregister_alg(&aesni_alg);
}
diff --git a/arch/x86/crypto/fpu.c b/arch/x86/crypto/fpu.c
new file mode 100644
index 000000000000..5f9781a3815f
--- /dev/null
+++ b/arch/x86/crypto/fpu.c
@@ -0,0 +1,166 @@
+/*
+ * FPU: Wrapper for blkcipher touching fpu
+ *
+ * Copyright (c) Intel Corp.
+ * Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#include <crypto/algapi.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/i387.h>
+
+struct crypto_fpu_ctx {
+ struct crypto_blkcipher *child;
+};
+
+static int crypto_fpu_setkey(struct crypto_tfm *parent, const u8 *key,
+ unsigned int keylen)
+{
+ struct crypto_fpu_ctx *ctx = crypto_tfm_ctx(parent);
+ struct crypto_blkcipher *child = ctx->child;
+ int err;
+
+ crypto_blkcipher_clear_flags(child, CRYPTO_TFM_REQ_MASK);
+ crypto_blkcipher_set_flags(child, crypto_tfm_get_flags(parent) &
+ CRYPTO_TFM_REQ_MASK);
+ err = crypto_blkcipher_setkey(child, key, keylen);
+ crypto_tfm_set_flags(parent, crypto_blkcipher_get_flags(child) &
+ CRYPTO_TFM_RES_MASK);
+ return err;
+}
+
+static int crypto_fpu_encrypt(struct blkcipher_desc *desc_in,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
+{
+ int err;
+ struct crypto_fpu_ctx *ctx = crypto_blkcipher_ctx(desc_in->tfm);
+ struct crypto_blkcipher *child = ctx->child;
+ struct blkcipher_desc desc = {
+ .tfm = child,
+ .info = desc_in->info,
+ .flags = desc_in->flags,
+ };
+
+ kernel_fpu_begin();
+ err = crypto_blkcipher_crt(desc.tfm)->encrypt(&desc, dst, src, nbytes);
+ kernel_fpu_end();
+ return err;
+}
+
+static int crypto_fpu_decrypt(struct blkcipher_desc *desc_in,
+ struct scatterlist *dst, struct scatterlist *src,
+ unsigned int nbytes)
+{
+ int err;
+ struct crypto_fpu_ctx *ctx = crypto_blkcipher_ctx(desc_in->tfm);
+ struct crypto_blkcipher *child = ctx->child;
+ struct blkcipher_desc desc = {
+ .tfm = child,
+ .info = desc_in->info,
+ .flags = desc_in->flags,
+ };
+
+ kernel_fpu_begin();
+ err = crypto_blkcipher_crt(desc.tfm)->decrypt(&desc, dst, src, nbytes);
+ kernel_fpu_end();
+ return err;
+}
+
+static int crypto_fpu_init_tfm(struct crypto_tfm *tfm)
+{
+ struct crypto_instance *inst = crypto_tfm_alg_instance(tfm);
+ struct crypto_spawn *spawn = crypto_instance_ctx(inst);
+ struct crypto_fpu_ctx *ctx = crypto_tfm_ctx(tfm);
+ struct crypto_blkcipher *cipher;
+
+ cipher = crypto_spawn_blkcipher(spawn);
+ if (IS_ERR(cipher))
+ return PTR_ERR(cipher);
+
+ ctx->child = cipher;
+ return 0;
+}
+
+static void crypto_fpu_exit_tfm(struct crypto_tfm *tfm)
+{
+ struct crypto_fpu_ctx *ctx = crypto_tfm_ctx(tfm);
+ crypto_free_blkcipher(ctx->child);
+}
+
+static struct crypto_instance *crypto_fpu_alloc(struct rtattr **tb)
+{
+ struct crypto_instance *inst;
+ struct crypto_alg *alg;
+ int err;
+
+ err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_BLKCIPHER);
+ if (err)
+ return ERR_PTR(err);
+
+ alg = crypto_get_attr_alg(tb, CRYPTO_ALG_TYPE_BLKCIPHER,
+ CRYPTO_ALG_TYPE_MASK);
+ if (IS_ERR(alg))
+ return ERR_CAST(alg);
+
+ inst = crypto_alloc_instance("fpu", alg);
+ if (IS_ERR(inst))
+ goto out_put_alg;
+
+ inst->alg.cra_flags = alg->cra_flags;
+ inst->alg.cra_priority = alg->cra_priority;
+ inst->alg.cra_blocksize = alg->cra_blocksize;
+ inst->alg.cra_alignmask = alg->cra_alignmask;
+ inst->alg.cra_type = alg->cra_type;
+ inst->alg.cra_blkcipher.ivsize = alg->cra_blkcipher.ivsize;
+ inst->alg.cra_blkcipher.min_keysize = alg->cra_blkcipher.min_keysize;
+ inst->alg.cra_blkcipher.max_keysize = alg->cra_blkcipher.max_keysize;
+ inst->alg.cra_ctxsize = sizeof(struct crypto_fpu_ctx);
+ inst->alg.cra_init = crypto_fpu_init_tfm;
+ inst->alg.cra_exit = crypto_fpu_exit_tfm;
+ inst->alg.cra_blkcipher.setkey = crypto_fpu_setkey;
+ inst->alg.cra_blkcipher.encrypt = crypto_fpu_encrypt;
+ inst->alg.cra_blkcipher.decrypt = crypto_fpu_decrypt;
+
+out_put_alg:
+ crypto_mod_put(alg);
+ return inst;
+}
+
+static void crypto_fpu_free(struct crypto_instance *inst)
+{
+ crypto_drop_spawn(crypto_instance_ctx(inst));
+ kfree(inst);
+}
+
+static struct crypto_template crypto_fpu_tmpl = {
+ .name = "fpu",
+ .alloc = crypto_fpu_alloc,
+ .free = crypto_fpu_free,
+ .module = THIS_MODULE,
+};
+
+static int __init crypto_fpu_module_init(void)
+{
+ return crypto_register_template(&crypto_fpu_tmpl);
+}
+
+static void __exit crypto_fpu_module_exit(void)
+{
+ crypto_unregister_template(&crypto_fpu_tmpl);
+}
+
+module_init(crypto_fpu_module_init);
+module_exit(crypto_fpu_module_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("FPU block cipher wrapper");
diff --git a/arch/x86/include/asm/entry_arch.h b/arch/x86/include/asm/entry_arch.h
index d750a10ccad6..ff8cbfa07851 100644
--- a/arch/x86/include/asm/entry_arch.h
+++ b/arch/x86/include/asm/entry_arch.h
@@ -14,6 +14,7 @@ BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
BUILD_INTERRUPT(call_function_single_interrupt,CALL_FUNCTION_SINGLE_VECTOR)
BUILD_INTERRUPT(irq_move_cleanup_interrupt,IRQ_MOVE_CLEANUP_VECTOR)
+BUILD_INTERRUPT(reboot_interrupt,REBOOT_VECTOR)
BUILD_INTERRUPT3(invalidate_interrupt0,INVALIDATE_TLB_VECTOR_START+0,
smp_invalidate_interrupt)
@@ -52,8 +53,16 @@ BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
BUILD_INTERRUPT(perf_pending_interrupt, LOCAL_PENDING_VECTOR)
#endif
-#ifdef CONFIG_X86_MCE_P4THERMAL
+#ifdef CONFIG_X86_THERMAL_VECTOR
BUILD_INTERRUPT(thermal_interrupt,THERMAL_APIC_VECTOR)
#endif
+#ifdef CONFIG_X86_MCE_THRESHOLD
+BUILD_INTERRUPT(threshold_interrupt,THRESHOLD_APIC_VECTOR)
+#endif
+
+#ifdef CONFIG_X86_NEW_MCE
+BUILD_INTERRUPT(mce_self_interrupt,MCE_SELF_VECTOR)
+#endif
+
#endif
diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h
index 9ebc5c255032..82e3e8f01043 100644
--- a/arch/x86/include/asm/hardirq.h
+++ b/arch/x86/include/asm/hardirq.h
@@ -22,7 +22,7 @@ typedef struct {
#endif
#ifdef CONFIG_X86_MCE
unsigned int irq_thermal_count;
-# ifdef CONFIG_X86_64
+# ifdef CONFIG_X86_MCE_THRESHOLD
unsigned int irq_threshold_count;
# endif
#endif
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index 6df45f639666..ba180d93b08c 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -34,6 +34,7 @@ extern void perf_pending_interrupt(void);
extern void spurious_interrupt(void);
extern void thermal_interrupt(void);
extern void reschedule_interrupt(void);
+extern void mce_self_interrupt(void);
extern void invalidate_interrupt(void);
extern void invalidate_interrupt0(void);
@@ -46,6 +47,7 @@ extern void invalidate_interrupt6(void);
extern void invalidate_interrupt7(void);
extern void irq_move_cleanup_interrupt(void);
+extern void reboot_interrupt(void);
extern void threshold_interrupt(void);
extern void call_function_interrupt(void);
diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index e997be98c9b9..5b21f0ec3df2 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -25,6 +25,7 @@
*/
#define NMI_VECTOR 0x02
+#define MCE_VECTOR 0x12
/*
* IDT vectors usable for external interrupt sources start
@@ -87,13 +88,8 @@
#define CALL_FUNCTION_VECTOR 0xfc
#define CALL_FUNCTION_SINGLE_VECTOR 0xfb
#define THERMAL_APIC_VECTOR 0xfa
-
-#ifdef CONFIG_X86_32
-/* 0xf8 - 0xf9 : free */
-#else
-# define THRESHOLD_APIC_VECTOR 0xf9
-# define UV_BAU_MESSAGE 0xf8
-#endif
+#define THRESHOLD_APIC_VECTOR 0xf9
+#define REBOOT_VECTOR 0xf8
/* f0-f7 used for spreading out TLB flushes: */
#define INVALIDATE_TLB_VECTOR_END 0xf7
@@ -117,6 +113,13 @@
*/
#define LOCAL_PENDING_VECTOR 0xec
+#define UV_BAU_MESSAGE 0xec
+
+/*
+ * Self IPI vector for machine checks
+ */
+#define MCE_SELF_VECTOR 0xeb
+
/*
* First APIC vector available to drivers: (vectors 0x30-0xee) we
* start at 0x31(0x41) to spread out vectors evenly between priority
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 4f8c199584e7..540a466e50f5 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -1,8 +1,6 @@
#ifndef _ASM_X86_MCE_H
#define _ASM_X86_MCE_H
-#ifdef __x86_64__
-
#include <linux/types.h>
#include <asm/ioctls.h>
@@ -10,21 +8,35 @@
* Machine Check support for x86
*/
-#define MCG_CTL_P (1UL<<8) /* MCG_CAP register available */
-#define MCG_EXT_P (1ULL<<9) /* Extended registers available */
-#define MCG_CMCI_P (1ULL<<10) /* CMCI supported */
-
-#define MCG_STATUS_RIPV (1UL<<0) /* restart ip valid */
-#define MCG_STATUS_EIPV (1UL<<1) /* ip points to correct instruction */
-#define MCG_STATUS_MCIP (1UL<<2) /* machine check in progress */
-
-#define MCI_STATUS_VAL (1UL<<63) /* valid error */
-#define MCI_STATUS_OVER (1UL<<62) /* previous errors lost */
-#define MCI_STATUS_UC (1UL<<61) /* uncorrected error */
-#define MCI_STATUS_EN (1UL<<60) /* error enabled */
-#define MCI_STATUS_MISCV (1UL<<59) /* misc error reg. valid */
-#define MCI_STATUS_ADDRV (1UL<<58) /* addr reg. valid */
-#define MCI_STATUS_PCC (1UL<<57) /* processor context corrupt */
+#define MCG_BANKCNT_MASK 0xff /* Number of Banks */
+#define MCG_CTL_P (1ULL<<8) /* MCG_CAP register available */
+#define MCG_EXT_P (1ULL<<9) /* Extended registers available */
+#define MCG_CMCI_P (1ULL<<10) /* CMCI supported */
+#define MCG_EXT_CNT_MASK 0xff0000 /* Number of Extended registers */
+#define MCG_EXT_CNT_SHIFT 16
+#define MCG_EXT_CNT(c) (((c) & MCG_EXT_CNT_MASK) >> MCG_EXT_CNT_SHIFT)
+#define MCG_SER_P (1ULL<<24) /* MCA recovery/new status bits */
+
+#define MCG_STATUS_RIPV (1ULL<<0) /* restart ip valid */
+#define MCG_STATUS_EIPV (1ULL<<1) /* ip points to correct instruction */
+#define MCG_STATUS_MCIP (1ULL<<2) /* machine check in progress */
+
+#define MCI_STATUS_VAL (1ULL<<63) /* valid error */
+#define MCI_STATUS_OVER (1ULL<<62) /* previous errors lost */
+#define MCI_STATUS_UC (1ULL<<61) /* uncorrected error */
+#define MCI_STATUS_EN (1ULL<<60) /* error enabled */
+#define MCI_STATUS_MISCV (1ULL<<59) /* misc error reg. valid */
+#define MCI_STATUS_ADDRV (1ULL<<58) /* addr reg. valid */
+#define MCI_STATUS_PCC (1ULL<<57) /* processor context corrupt */
+#define MCI_STATUS_S (1ULL<<56) /* Signaled machine check */
+#define MCI_STATUS_AR (1ULL<<55) /* Action required */
+
+/* MISC register defines */
+#define MCM_ADDR_SEGOFF 0 /* segment offset */
+#define MCM_ADDR_LINEAR 1 /* linear address */
+#define MCM_ADDR_PHYS 2 /* physical address */
+#define MCM_ADDR_MEM 3 /* memory address */
+#define MCM_ADDR_GENERIC 7 /* generic */
/* Fields are zero when not available */
struct mce {
@@ -34,13 +46,19 @@ struct mce {
__u64 mcgstatus;
__u64 ip;
__u64 tsc; /* cpu time stamp counter */
- __u64 res1; /* for future extension */
- __u64 res2; /* dito. */
+ __u64 time; /* wall time_t when error was detected */
+ __u8 cpuvendor; /* cpu vendor as encoded in system.h */
+ __u8 pad1;
+ __u16 pad2;
+ __u32 cpuid; /* CPUID 1 EAX */
__u8 cs; /* code segment */
__u8 bank; /* machine check bank */
- __u8 cpu; /* cpu that raised the error */
+ __u8 cpu; /* cpu number; obsolete; use extcpu now */
__u8 finished; /* entry is valid */
- __u32 pad;
+ __u32 extcpu; /* linux cpu number that detected the error */
+ __u32 socketid; /* CPU socket ID */
+ __u32 apicid; /* CPU initial apic ID */
+ __u64 mcgcap; /* MCGCAP MSR: machine check capabilities of CPU */
};
/*
@@ -57,7 +75,7 @@ struct mce_log {
unsigned len; /* = MCE_LOG_LEN */
unsigned next;
unsigned flags;
- unsigned pad0;
+ unsigned recordlen; /* length of struct mce */
struct mce entry[MCE_LOG_LEN];
};
@@ -82,19 +100,16 @@ struct mce_log {
#define K8_MCE_THRESHOLD_BANK_5 (MCE_THRESHOLD_BASE + 5 * 9)
#define K8_MCE_THRESHOLD_DRAM_ECC (MCE_THRESHOLD_BANK_4 + 0)
-#endif /* __x86_64__ */
-
#ifdef __KERNEL__
-#ifdef CONFIG_X86_32
extern int mce_disabled;
-#else /* CONFIG_X86_32 */
#include <asm/atomic.h>
+#include <linux/percpu.h>
void mce_setup(struct mce *m);
void mce_log(struct mce *m);
-DECLARE_PER_CPU(struct sys_device, device_mce);
+DECLARE_PER_CPU(struct sys_device, mce_dev);
extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
/*
@@ -104,6 +119,8 @@ extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
#define MAX_NR_BANKS (MCE_EXTENDED_BANK - 1)
#ifdef CONFIG_X86_MCE_INTEL
+extern int mce_cmci_disabled;
+extern int mce_ignore_ce;
void mce_intel_feature_init(struct cpuinfo_x86 *c);
void cmci_clear(void);
void cmci_reenable(void);
@@ -123,13 +140,16 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c);
static inline void mce_amd_feature_init(struct cpuinfo_x86 *c) { }
#endif
-extern int mce_available(struct cpuinfo_x86 *c);
+int mce_available(struct cpuinfo_x86 *c);
+
+DECLARE_PER_CPU(unsigned, mce_exception_count);
+DECLARE_PER_CPU(unsigned, mce_poll_count);
void mce_log_therm_throt_event(__u64 status);
extern atomic_t mce_entry;
-extern void do_machine_check(struct pt_regs *, long);
+void do_machine_check(struct pt_regs *, long);
typedef DECLARE_BITMAP(mce_banks_t, MAX_NR_BANKS);
DECLARE_PER_CPU(mce_banks_t, mce_poll_banks);
@@ -139,14 +159,16 @@ enum mcp_flags {
MCP_UC = (1 << 1), /* log uncorrected errors */
MCP_DONTLOG = (1 << 2), /* only clear, don't log */
};
-extern void machine_check_poll(enum mcp_flags flags, mce_banks_t *b);
+void machine_check_poll(enum mcp_flags flags, mce_banks_t *b);
-extern int mce_notify_user(void);
+int mce_notify_irq(void);
+void mce_notify_process(void);
-#endif /* !CONFIG_X86_32 */
+DECLARE_PER_CPU(struct mce, injectm);
+extern struct file_operations mce_chrdev_ops;
#ifdef CONFIG_X86_MCE
-extern void mcheck_init(struct cpuinfo_x86 *c);
+void mcheck_init(struct cpuinfo_x86 *c);
#else
#define mcheck_init(c) do { } while (0)
#endif
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 4d58d04fca83..1692fb5050e3 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -207,7 +207,14 @@
#define MSR_IA32_THERM_CONTROL 0x0000019a
#define MSR_IA32_THERM_INTERRUPT 0x0000019b
+
+#define THERM_INT_LOW_ENABLE (1 << 0)
+#define THERM_INT_HIGH_ENABLE (1 << 1)
+
#define MSR_IA32_THERM_STATUS 0x0000019c
+
+#define THERM_STATUS_PROCHOT (1 << 0)
+
#define MSR_IA32_MISC_ENABLE 0x000001a0
/* MISC_ENABLE bits: architectural */
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 076d3881f3da..8c7c042ecad1 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -899,7 +899,7 @@ void clear_local_APIC(void)
}
/* lets not touch this if we didn't frob it */
-#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
+#ifdef CONFIG_X86_THERMAL_VECTOR
if (maxlvt >= 5) {
v = apic_read(APIC_LVTTHMR);
apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
@@ -2017,7 +2017,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state)
apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
-#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
+#ifdef CONFIG_X86_THERMAL_VECTOR
if (maxlvt >= 5)
apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
#endif
diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
index a691302dc3ff..b3025b43b63a 100644
--- a/arch/x86/kernel/apic/nmi.c
+++ b/arch/x86/kernel/apic/nmi.c
@@ -66,7 +66,7 @@ static inline unsigned int get_nmi_count(int cpu)
static inline int mce_in_progress(void)
{
-#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE)
+#if defined(CONFIG_X86_NEW_MCE)
return atomic_read(&mce_entry) > 0;
#endif
return 0;
diff --git a/arch/x86/kernel/cpu/mcheck/Makefile b/arch/x86/kernel/cpu/mcheck/Makefile
index b2f89829bbe8..45004faf67ea 100644
--- a/arch/x86/kernel/cpu/mcheck/Makefile
+++ b/arch/x86/kernel/cpu/mcheck/Makefile
@@ -1,7 +1,11 @@
-obj-y = mce_$(BITS).o therm_throt.o
+obj-y = mce.o therm_throt.o
-obj-$(CONFIG_X86_32) += k7.o p4.o p5.o p6.o winchip.o
-obj-$(CONFIG_X86_MCE_INTEL) += mce_intel_64.o
+obj-$(CONFIG_X86_NEW_MCE) += mce-severity.o
+obj-$(CONFIG_X86_OLD_MCE) += k7.o p4.o p6.o
+obj-$(CONFIG_X86_ANCIENT_MCE) += winchip.o p5.o
+obj-$(CONFIG_X86_MCE_P4THERMAL) += mce_intel.o
+obj-$(CONFIG_X86_MCE_INTEL) += mce_intel_64.o mce_intel.o
obj-$(CONFIG_X86_MCE_AMD) += mce_amd_64.o
obj-$(CONFIG_X86_MCE_NONFATAL) += non-fatal.o
obj-$(CONFIG_X86_MCE_THRESHOLD) += threshold.o
+obj-$(CONFIG_X86_MCE_INJECT) += mce-inject.o
diff --git a/arch/x86/kernel/cpu/mcheck/k7.c b/arch/x86/kernel/cpu/mcheck/k7.c
index dd3af6e7b39a..89e510424152 100644
--- a/arch/x86/kernel/cpu/mcheck/k7.c
+++ b/arch/x86/kernel/cpu/mcheck/k7.c
@@ -2,11 +2,10 @@
* Athlon specific Machine Check Exception Reporting
* (C) Copyright 2002 Dave Jones <davej@redhat.com>
*/
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
#include <linux/smp.h>
#include <asm/processor.h>
@@ -15,12 +14,12 @@
#include "mce.h"
-/* Machine Check Handler For AMD Athlon/Duron */
+/* Machine Check Handler For AMD Athlon/Duron: */
static void k7_machine_check(struct pt_regs *regs, long error_code)
{
- int recover = 1;
u32 alow, ahigh, high, low;
u32 mcgstl, mcgsth;
+ int recover = 1;
int i;
rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
@@ -32,15 +31,19 @@ static void k7_machine_check(struct pt_regs *regs, long error_code)
for (i = 1; i < nr_mce_banks; i++) {
rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
- if (high&(1<<31)) {
+ if (high & (1<<31)) {
char misc[20];
char addr[24];
- misc[0] = addr[0] = '\0';
+
+ misc[0] = '\0';
+ addr[0] = '\0';
+
if (high & (1<<29))
recover |= 1;
if (high & (1<<25))
recover |= 2;
high &= ~(1<<31);
+
if (high & (1<<27)) {
rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh);
snprintf(misc, 20, "[%08x%08x]", ahigh, alow);
@@ -49,27 +52,31 @@ static void k7_machine_check(struct pt_regs *regs, long error_code)
rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
snprintf(addr, 24, " at %08x%08x", ahigh, alow);
}
+
printk(KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",
smp_processor_id(), i, high, low, misc, addr);
- /* Clear it */
+
+ /* Clear it: */
wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
- /* Serialize */
+ /* Serialize: */
wmb();
add_taint(TAINT_MACHINE_CHECK);
}
}
- if (recover&2)
+ if (recover & 2)
panic("CPU context corrupt");
- if (recover&1)
+ if (recover & 1)
panic("Unable to continue");
+
printk(KERN_EMERG "Attempting to continue.\n");
+
mcgstl &= ~(1<<2);
wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
}
-/* AMD K7 machine check is Intel like */
+/* AMD K7 machine check is Intel like: */
void amd_mcheck_init(struct cpuinfo_x86 *c)
{
u32 l, h;
@@ -79,21 +86,26 @@ void amd_mcheck_init(struct cpuinfo_x86 *c)
return;
machine_check_vector = k7_machine_check;
+ /* Make sure the vector pointer is visible before we enable MCEs: */
wmb();
printk(KERN_INFO "Intel machine check architecture supported.\n");
+
rdmsr(MSR_IA32_MCG_CAP, l, h);
if (l & (1<<8)) /* Control register present ? */
wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
nr_mce_banks = l & 0xff;
- /* Clear status for MC index 0 separately, we don't touch CTL,
- * as some K7 Athlons cause spurious MCEs when its enabled. */
+ /*
+ * Clear status for MC index 0 separately, we don't touch CTL,
+ * as some K7 Athlons cause spurious MCEs when its enabled:
+ */
if (boot_cpu_data.x86 == 6) {
wrmsr(MSR_IA32_MC0_STATUS, 0x0, 0x0);
i = 1;
} else
i = 0;
+
for (; i < nr_mce_banks; i++) {
wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c
new file mode 100644
index 000000000000..a3a235a53f09
--- /dev/null
+++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c
@@ -0,0 +1,127 @@
+/*
+ * Machine check injection support.
+ * Copyright 2008 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * Authors:
+ * Andi Kleen
+ * Ying Huang
+ */
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <linux/timer.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/fs.h>
+#include <linux/smp.h>
+#include <asm/mce.h>
+
+/* Update fake mce registers on current CPU. */
+static void inject_mce(struct mce *m)
+{
+ struct mce *i = &per_cpu(injectm, m->extcpu);
+
+ /* Make sure noone reads partially written injectm */
+ i->finished = 0;
+ mb();
+ m->finished = 0;
+ /* First set the fields after finished */
+ i->extcpu = m->extcpu;
+ mb();
+ /* Now write record in order, finished last (except above) */
+ memcpy(i, m, sizeof(struct mce));
+ /* Finally activate it */
+ mb();
+ i->finished = 1;
+}
+
+struct delayed_mce {
+ struct timer_list timer;
+ struct mce m;
+};
+
+/* Inject mce on current CPU */
+static void raise_mce(unsigned long data)
+{
+ struct delayed_mce *dm = (struct delayed_mce *)data;
+ struct mce *m = &dm->m;
+ int cpu = m->extcpu;
+
+ inject_mce(m);
+ if (m->status & MCI_STATUS_UC) {
+ struct pt_regs regs;
+ memset(&regs, 0, sizeof(struct pt_regs));
+ regs.ip = m->ip;
+ regs.cs = m->cs;
+ printk(KERN_INFO "Triggering MCE exception on CPU %d\n", cpu);
+ do_machine_check(&regs, 0);
+ printk(KERN_INFO "MCE exception done on CPU %d\n", cpu);
+ } else {
+ mce_banks_t b;
+ memset(&b, 0xff, sizeof(mce_banks_t));
+ printk(KERN_INFO "Starting machine check poll CPU %d\n", cpu);
+ machine_check_poll(0, &b);
+ mce_notify_irq();
+ printk(KERN_INFO "Finished machine check poll on CPU %d\n",
+ cpu);
+ }
+ kfree(dm);
+}
+
+/* Error injection interface */
+static ssize_t mce_write(struct file *filp, const char __user *ubuf,
+ size_t usize, loff_t *off)
+{
+ struct delayed_mce *dm;
+ struct mce m;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ /*
+ * There are some cases where real MSR reads could slip
+ * through.
+ */
+ if (!boot_cpu_has(X86_FEATURE_MCE) || !boot_cpu_has(X86_FEATURE_MCA))
+ return -EIO;
+
+ if ((unsigned long)usize > sizeof(struct mce))
+ usize = sizeof(struct mce);
+ if (copy_from_user(&m, ubuf, usize))
+ return -EFAULT;
+
+ if (m.extcpu >= num_possible_cpus() || !cpu_online(m.extcpu))
+ return -EINVAL;
+
+ dm = kmalloc(sizeof(struct delayed_mce), GFP_KERNEL);
+ if (!dm)
+ return -ENOMEM;
+
+ /*
+ * Need to give user space some time to set everything up,
+ * so do it a jiffie or two later everywhere.
+ * Should we use a hrtimer here for better synchronization?
+ */
+ memcpy(&dm->m, &m, sizeof(struct mce));
+ setup_timer(&dm->timer, raise_mce, (unsigned long)dm);
+ dm->timer.expires = jiffies + 2;
+ add_timer_on(&dm->timer, m.extcpu);
+ return usize;
+}
+
+static int inject_init(void)
+{
+ printk(KERN_INFO "Machine check injector initialized\n");
+ mce_chrdev_ops.write = mce_write;
+ return 0;
+}
+
+module_init(inject_init);
+/*
+ * Cannot tolerate unloading currently because we cannot
+ * guarantee all openers of mce_chrdev will get a reference to us.
+ */
+MODULE_LICENSE("GPL");
diff --git a/arch/x86/kernel/cpu/mcheck/mce-internal.h b/arch/x86/kernel/cpu/mcheck/mce-internal.h
new file mode 100644
index 000000000000..54dcb8ff12e5
--- /dev/null
+++ b/arch/x86/kernel/cpu/mcheck/mce-internal.h
@@ -0,0 +1,15 @@
+#include <asm/mce.h>
+
+enum severity_level {
+ MCE_NO_SEVERITY,
+ MCE_KEEP_SEVERITY,
+ MCE_SOME_SEVERITY,
+ MCE_AO_SEVERITY,
+ MCE_UC_SEVERITY,
+ MCE_AR_SEVERITY,
+ MCE_PANIC_SEVERITY,
+};
+
+int mce_severity(struct mce *a, int tolerant, char **msg);
+
+extern int mce_ser;
diff --git a/arch/x86/kernel/cpu/mcheck/mce-severity.c b/arch/x86/kernel/cpu/mcheck/mce-severity.c
new file mode 100644
index 000000000000..ff0807f97056
--- /dev/null
+++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c
@@ -0,0 +1,218 @@
+/*
+ * MCE grading rules.
+ * Copyright 2008, 2009 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * Author: Andi Kleen
+ */
+#include <linux/kernel.h>
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <asm/mce.h>
+
+#include "mce-internal.h"
+
+/*
+ * Grade an mce by severity. In general the most severe ones are processed
+ * first. Since there are quite a lot of combinations test the bits in a
+ * table-driven way. The rules are simply processed in order, first
+ * match wins.
+ *
+ * Note this is only used for machine check exceptions, the corrected
+ * errors use much simpler rules. The exceptions still check for the corrected
+ * errors, but only to leave them alone for the CMCI handler (except for
+ * panic situations)
+ */
+
+enum context { IN_KERNEL = 1, IN_USER = 2 };
+enum ser { SER_REQUIRED = 1, NO_SER = 2 };
+
+static struct severity {
+ u64 mask;
+ u64 result;
+ unsigned char sev;
+ unsigned char mcgmask;
+ unsigned char mcgres;
+ unsigned char ser;
+ unsigned char context;
+ unsigned char covered;
+ char *msg;
+} severities[] = {
+#define KERNEL .context = IN_KERNEL
+#define USER .context = IN_USER
+#define SER .ser = SER_REQUIRED
+#define NOSER .ser = NO_SER
+#define SEV(s) .sev = MCE_ ## s ## _SEVERITY
+#define BITCLR(x, s, m, r...) { .mask = x, .result = 0, SEV(s), .msg = m, ## r }
+#define BITSET(x, s, m, r...) { .mask = x, .result = x, SEV(s), .msg = m, ## r }
+#define MCGMASK(x, res, s, m, r...) \
+ { .mcgmask = x, .mcgres = res, SEV(s), .msg = m, ## r }
+#define MASK(x, y, s, m, r...) \
+ { .mask = x, .result = y, SEV(s), .msg = m, ## r }
+#define MCI_UC_S (MCI_STATUS_UC|MCI_STATUS_S)
+#define MCI_UC_SAR (MCI_STATUS_UC|MCI_STATUS_S|MCI_STATUS_AR)
+#define MCACOD 0xffff
+
+ BITCLR(MCI_STATUS_VAL, NO, "Invalid"),
+ BITCLR(MCI_STATUS_EN, NO, "Not enabled"),
+ BITSET(MCI_STATUS_PCC, PANIC, "Processor context corrupt"),
+ /* When MCIP is not set something is very confused */
+ MCGMASK(MCG_STATUS_MCIP, 0, PANIC, "MCIP not set in MCA handler"),
+ /* Neither return not error IP -- no chance to recover -> PANIC */
+ MCGMASK(MCG_STATUS_RIPV|MCG_STATUS_EIPV, 0, PANIC,
+ "Neither restart nor error IP"),
+ MCGMASK(MCG_STATUS_RIPV, 0, PANIC, "In kernel and no restart IP",
+ KERNEL),
+ BITCLR(MCI_STATUS_UC, KEEP, "Corrected error", NOSER),
+ MASK(MCI_STATUS_OVER|MCI_STATUS_UC|MCI_STATUS_EN, MCI_STATUS_UC, SOME,
+ "Spurious not enabled", SER),
+
+ /* ignore OVER for UCNA */
+ MASK(MCI_UC_SAR, MCI_STATUS_UC, KEEP,
+ "Uncorrected no action required", SER),
+ MASK(MCI_STATUS_OVER|MCI_UC_SAR, MCI_STATUS_UC|MCI_STATUS_AR, PANIC,
+ "Illegal combination (UCNA with AR=1)", SER),
+ MASK(MCI_STATUS_S, 0, KEEP, "Non signalled machine check", SER),
+
+ /* AR add known MCACODs here */
+ MASK(MCI_STATUS_OVER|MCI_UC_SAR, MCI_STATUS_OVER|MCI_UC_SAR, PANIC,
+ "Action required with lost events", SER),
+ MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCACOD, MCI_UC_SAR, PANIC,
+ "Action required; unknown MCACOD", SER),
+
+ /* known AO MCACODs: */
+ MASK(MCI_UC_SAR|MCI_STATUS_OVER|0xfff0, MCI_UC_S|0xc0, AO,
+ "Action optional: memory scrubbing error", SER),
+ MASK(MCI_UC_SAR|MCI_STATUS_OVER|MCACOD, MCI_UC_S|0x17a, AO,
+ "Action optional: last level cache writeback error", SER),
+
+ MASK(MCI_STATUS_OVER|MCI_UC_SAR, MCI_UC_S, SOME,
+ "Action optional unknown MCACOD", SER),
+ MASK(MCI_STATUS_OVER|MCI_UC_SAR, MCI_UC_S|MCI_STATUS_OVER, SOME,
+ "Action optional with lost events", SER),
+ BITSET(MCI_STATUS_UC|MCI_STATUS_OVER, PANIC, "Overflowed uncorrected"),
+ BITSET(MCI_STATUS_UC, UC, "Uncorrected"),
+ BITSET(0, SOME, "No match") /* always matches. keep at end */
+};
+
+/*
+ * If the EIPV bit is set, it means the saved IP is the
+ * instruction which caused the MCE.
+ */
+static int error_context(struct mce *m)
+{
+ if (m->mcgstatus & MCG_STATUS_EIPV)
+ return (m->ip && (m->cs & 3) == 3) ? IN_USER : IN_KERNEL;
+ /* Unknown, assume kernel */
+ return IN_KERNEL;
+}
+
+int mce_severity(struct mce *a, int tolerant, char **msg)
+{
+ enum context ctx = error_context(a);
+ struct severity *s;
+
+ for (s = severities;; s++) {
+ if ((a->status & s->mask) != s->result)
+ continue;
+ if ((a->mcgstatus & s->mcgmask) != s->mcgres)
+ continue;
+ if (s->ser == SER_REQUIRED && !mce_ser)
+ continue;
+ if (s->ser == NO_SER && mce_ser)
+ continue;
+ if (s->context && ctx != s->context)
+ continue;
+ if (msg)
+ *msg = s->msg;
+ s->covered = 1;
+ if (s->sev >= MCE_UC_SEVERITY && ctx == IN_KERNEL) {
+ if (panic_on_oops || tolerant < 1)
+ return MCE_PANIC_SEVERITY;
+ }
+ return s->sev;
+ }
+}
+
+static void *s_start(struct seq_file *f, loff_t *pos)
+{
+ if (*pos >= ARRAY_SIZE(severities))
+ return NULL;
+ return &severities[*pos];
+}
+
+static void *s_next(struct seq_file *f, void *data, loff_t *pos)
+{
+ if (++(*pos) >= ARRAY_SIZE(severities))
+ return NULL;
+ return &severities[*pos];
+}
+
+static void s_stop(struct seq_file *f, void *data)
+{
+}
+
+static int s_show(struct seq_file *f, void *data)
+{
+ struct severity *ser = data;
+ seq_printf(f, "%d\t%s\n", ser->covered, ser->msg);
+ return 0;
+}
+
+static const struct seq_operations severities_seq_ops = {
+ .start = s_start,
+ .next = s_next,
+ .stop = s_stop,
+ .show = s_show,
+};
+
+static int severities_coverage_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &severities_seq_ops);
+}
+
+static ssize_t severities_coverage_write(struct file *file,
+ const char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(severities); i++)
+ severities[i].covered = 0;
+ return count;
+}
+
+static const struct file_operations severities_coverage_fops = {
+ .open = severities_coverage_open,
+ .release = seq_release,
+ .read = seq_read,
+ .write = severities_coverage_write,
+};
+
+static int __init severities_debugfs_init(void)
+{
+ struct dentry *dmce = NULL, *fseverities_coverage = NULL;
+
+ dmce = debugfs_create_dir("mce", NULL);
+ if (dmce == NULL)
+ goto err_out;
+ fseverities_coverage = debugfs_create_file("severities-coverage",
+ 0444, dmce, NULL,
+ &severities_coverage_fops);
+ if (fseverities_coverage == NULL)
+ goto err_out;
+
+ return 0;
+
+err_out:
+ if (fseverities_coverage)
+ debugfs_remove(fseverities_coverage);
+ if (dmce)
+ debugfs_remove(dmce);
+ return -ENOMEM;
+}
+late_initcall(severities_debugfs_init);
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
new file mode 100644
index 000000000000..fabba15e4558
--- /dev/null
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -0,0 +1,1964 @@
+/*
+ * Machine check handler.
+ *
+ * K8 parts Copyright 2002,2003 Andi Kleen, SuSE Labs.
+ * Rest from unknown author(s).
+ * 2004 Andi Kleen. Rewrote most of it.
+ * Copyright 2008 Intel Corporation
+ * Author: Andi Kleen
+ */
+#include <linux/thread_info.h>
+#include <linux/capability.h>
+#include <linux/miscdevice.h>
+#include <linux/interrupt.h>
+#include <linux/ratelimit.h>
+#include <linux/kallsyms.h>
+#include <linux/rcupdate.h>
+#include <linux/kobject.h>
+#include <linux/uaccess.h>
+#include <linux/kdebug.h>
+#include <linux/kernel.h>
+#include <linux/percpu.h>
+#include <linux/string.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/sched.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kmod.h>
+#include <linux/poll.h>
+#include <linux/nmi.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+
+#include <asm/processor.h>
+#include <asm/hw_irq.h>
+#include <asm/apic.h>
+#include <asm/idle.h>
+#include <asm/ipi.h>
+#include <asm/mce.h>
+#include <asm/msr.h>
+
+#include "mce-internal.h"
+#include "mce.h"
+
+/* Handle unconfigured int18 (should never happen) */
+static void unexpected_machine_check(struct pt_regs *regs, long error_code)
+{
+ printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n",
+ smp_processor_id());
+}
+
+/* Call the installed machine check handler for this CPU setup. */
+void (*machine_check_vector)(struct pt_regs *, long error_code) =
+ unexpected_machine_check;
+
+int mce_disabled;
+
+#ifdef CONFIG_X86_NEW_MCE
+
+#define MISC_MCELOG_MINOR 227
+
+#define SPINUNIT 100 /* 100ns */
+
+atomic_t mce_entry;
+
+DEFINE_PER_CPU(unsigned, mce_exception_count);
+
+/*
+ * Tolerant levels:
+ * 0: always panic on uncorrected errors, log corrected errors
+ * 1: panic or SIGBUS on uncorrected errors, log corrected errors
+ * 2: SIGBUS or log uncorrected errors (if possible), log corrected errors
+ * 3: never panic or SIGBUS, log all errors (for testing only)
+ */
+static int tolerant = 1;
+static int banks;
+static u64 *bank;
+static unsigned long notify_user;
+static int rip_msr;
+static int mce_bootlog = -1;
+static int monarch_timeout = -1;
+static int mce_panic_timeout;
+static int mce_dont_log_ce;
+int mce_cmci_disabled;
+int mce_ignore_ce;
+int mce_ser;
+
+static char trigger[128];
+static char *trigger_argv[2] = { trigger, NULL };
+
+static unsigned long dont_init_banks;
+
+static DECLARE_WAIT_QUEUE_HEAD(mce_wait);
+static DEFINE_PER_CPU(struct mce, mces_seen);
+static int cpu_missing;
+
+
+/* MCA banks polled by the period polling timer for corrected events */
+DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
+ [0 ... BITS_TO_LONGS(MAX_NR_BANKS)-1] = ~0UL
+};
+
+static inline int skip_bank_init(int i)
+{
+ return i < BITS_PER_LONG && test_bit(i, &dont_init_banks);
+}
+
+static DEFINE_PER_CPU(struct work_struct, mce_work);
+
+/* Do initial initialization of a struct mce */
+void mce_setup(struct mce *m)
+{
+ memset(m, 0, sizeof(struct mce));
+ m->cpu = m->extcpu = smp_processor_id();
+ rdtscll(m->tsc);
+ /* We hope get_seconds stays lockless */
+ m->time = get_seconds();
+ m->cpuvendor = boot_cpu_data.x86_vendor;
+ m->cpuid = cpuid_eax(1);
+#ifdef CONFIG_SMP
+ m->socketid = cpu_data(m->extcpu).phys_proc_id;
+#endif
+ m->apicid = cpu_data(m->extcpu).initial_apicid;
+ rdmsrl(MSR_IA32_MCG_CAP, m->mcgcap);
+}
+
+DEFINE_PER_CPU(struct mce, injectm);
+EXPORT_PER_CPU_SYMBOL_GPL(injectm);
+
+/*
+ * Lockless MCE logging infrastructure.
+ * This avoids deadlocks on printk locks without having to break locks. Also
+ * separate MCEs from kernel messages to avoid bogus bug reports.
+ */
+
+static struct mce_log mcelog = {
+ .signature = MCE_LOG_SIGNATURE,
+ .len = MCE_LOG_LEN,
+ .recordlen = sizeof(struct mce),
+};
+
+void mce_log(struct mce *mce)
+{
+ unsigned next, entry;
+
+ mce->finished = 0;
+ wmb();
+ for (;;) {
+ entry = rcu_dereference(mcelog.next);
+ for (;;) {
+ /*
+ * When the buffer fills up discard new entries.
+ * Assume that the earlier errors are the more
+ * interesting ones:
+ */
+ if (entry >= MCE_LOG_LEN) {
+ set_bit(MCE_OVERFLOW,
+ (unsigned long *)&mcelog.flags);
+ return;
+ }
+ /* Old left over entry. Skip: */
+ if (mcelog.entry[entry].finished) {
+ entry++;
+ continue;
+ }
+ break;
+ }
+ smp_rmb();
+ next = entry + 1;
+ if (cmpxchg(&mcelog.next, entry, next) == entry)
+ break;
+ }
+ memcpy(mcelog.entry + entry, mce, sizeof(struct mce));
+ wmb();
+ mcelog.entry[entry].finished = 1;
+ wmb();
+
+ mce->finished = 1;
+ set_bit(0, &notify_user);
+}
+
+static void print_mce(struct mce *m)
+{
+ printk(KERN_EMERG
+ "CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n",
+ m->extcpu, m->mcgstatus, m->bank, m->status);
+ if (m->ip) {
+ printk(KERN_EMERG "RIP%s %02x:<%016Lx> ",
+ !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "",
+ m->cs, m->ip);
+ if (m->cs == __KERNEL_CS)
+ print_symbol("{%s}", m->ip);
+ printk("\n");
+ }
+ printk(KERN_EMERG "TSC %llx ", m->tsc);
+ if (m->addr)
+ printk("ADDR %llx ", m->addr);
+ if (m->misc)
+ printk("MISC %llx ", m->misc);
+ printk("\n");
+ printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
+ m->cpuvendor, m->cpuid, m->time, m->socketid,
+ m->apicid);
+}
+
+static void print_mce_head(void)
+{
+ printk(KERN_EMERG "\n" KERN_EMERG "HARDWARE ERROR\n");
+}
+
+static void print_mce_tail(void)
+{
+ printk(KERN_EMERG "This is not a software problem!\n"
+ KERN_EMERG "Run through mcelog --ascii to decode and contact your hardware vendor\n");
+}
+
+#define PANIC_TIMEOUT 5 /* 5 seconds */
+
+static atomic_t mce_paniced;
+
+/* Panic in progress. Enable interrupts and wait for final IPI */
+static void wait_for_panic(void)
+{
+ long timeout = PANIC_TIMEOUT*USEC_PER_SEC;
+ preempt_disable();
+ local_irq_enable();
+ while (timeout-- > 0)
+ udelay(1);
+ if (panic_timeout == 0)
+ panic_timeout = mce_panic_timeout;
+ panic("Panicing machine check CPU died");
+}
+
+static void mce_panic(char *msg, struct mce *final, char *exp)
+{
+ int i;
+
+ /*
+ * Make sure only one CPU runs in machine check panic
+ */
+ if (atomic_add_return(1, &mce_paniced) > 1)
+ wait_for_panic();
+ barrier();
+
+ bust_spinlocks(1);
+ console_verbose();
+ print_mce_head();
+ /* First print corrected ones that are still unlogged */
+ for (i = 0; i < MCE_LOG_LEN; i++) {
+ struct mce *m = &mcelog.entry[i];
+ if (!(m->status & MCI_STATUS_VAL))
+ continue;
+ if (!(m->status & MCI_STATUS_UC))
+ print_mce(m);
+ }
+ /* Now print uncorrected but with the final one last */
+ for (i = 0; i < MCE_LOG_LEN; i++) {
+ struct mce *m = &mcelog.entry[i];
+ if (!(m->status & MCI_STATUS_VAL))
+ continue;
+ if (!(m->status & MCI_STATUS_UC))
+ continue;
+ if (!final || memcmp(m, final, sizeof(struct mce)))
+ print_mce(m);
+ }
+ if (final)
+ print_mce(final);
+ if (cpu_missing)
+ printk(KERN_EMERG "Some CPUs didn't answer in synchronization\n");
+ print_mce_tail();
+ if (exp)
+ printk(KERN_EMERG "Machine check: %s\n", exp);
+ if (panic_timeout == 0)
+ panic_timeout = mce_panic_timeout;
+ panic(msg);
+}
+
+/* Support code for software error injection */
+
+static int msr_to_offset(u32 msr)
+{
+ unsigned bank = __get_cpu_var(injectm.bank);
+ if (msr == rip_msr)
+ return offsetof(struct mce, ip);
+ if (msr == MSR_IA32_MC0_STATUS + bank*4)
+ return offsetof(struct mce, status);
+ if (msr == MSR_IA32_MC0_ADDR + bank*4)
+ return offsetof(struct mce, addr);
+ if (msr == MSR_IA32_MC0_MISC + bank*4)
+ return offsetof(struct mce, misc);
+ if (msr == MSR_IA32_MCG_STATUS)
+ return offsetof(struct mce, mcgstatus);
+ return -1;
+}
+
+/* MSR access wrappers used for error injection */
+static u64 mce_rdmsrl(u32 msr)
+{
+ u64 v;
+ if (__get_cpu_var(injectm).finished) {
+ int offset = msr_to_offset(msr);
+ if (offset < 0)
+ return 0;
+ return *(u64 *)((char *)&__get_cpu_var(injectm) + offset);
+ }
+ rdmsrl(msr, v);
+ return v;
+}
+
+static void mce_wrmsrl(u32 msr, u64 v)
+{
+ if (__get_cpu_var(injectm).finished) {
+ int offset = msr_to_offset(msr);
+ if (offset >= 0)
+ *(u64 *)((char *)&__get_cpu_var(injectm) + offset) = v;
+ return;
+ }
+ wrmsrl(msr, v);
+}
+
+/*
+ * Simple lockless ring to communicate PFNs from the exception handler with the
+ * process context work function. This is vastly simplified because there's
+ * only a single reader and a single writer.
+ */
+#define MCE_RING_SIZE 16 /* we use one entry less */
+
+struct mce_ring {
+ unsigned short start;
+ unsigned short end;
+ unsigned long ring[MCE_RING_SIZE];
+};
+static DEFINE_PER_CPU(struct mce_ring, mce_ring);
+
+/* Runs with CPU affinity in workqueue */
+static int mce_ring_empty(void)
+{
+ struct mce_ring *r = &__get_cpu_var(mce_ring);
+
+ return r->start == r->end;
+}
+
+static int mce_ring_get(unsigned long *pfn)
+{
+ struct mce_ring *r;
+ int ret = 0;
+
+ *pfn = 0;
+ get_cpu();
+ r = &__get_cpu_var(mce_ring);
+ if (r->start == r->end)
+ goto out;
+ *pfn = r->ring[r->start];
+ r->start = (r->start + 1) % MCE_RING_SIZE;
+ ret = 1;
+out:
+ put_cpu();
+ return ret;
+}
+
+/* Always runs in MCE context with preempt off */
+static int mce_ring_add(unsigned long pfn)
+{
+ struct mce_ring *r = &__get_cpu_var(mce_ring);
+ unsigned next;
+
+ next = (r->end + 1) % MCE_RING_SIZE;
+ if (next == r->start)
+ return -1;
+ r->ring[r->end] = pfn;
+ wmb();
+ r->end = next;
+ return 0;
+}
+
+int mce_available(struct cpuinfo_x86 *c)
+{
+ if (mce_disabled)
+ return 0;
+ return cpu_has(c, X86_FEATURE_MCE) && cpu_has(c, X86_FEATURE_MCA);
+}
+
+static void mce_schedule_work(void)
+{
+ if (!mce_ring_empty()) {
+ struct work_struct *work = &__get_cpu_var(mce_work);
+ if (!work_pending(work))
+ schedule_work(work);
+ }
+}
+
+/*
+ * Get the address of the instruction at the time of the machine check
+ * error.
+ */
+static inline void mce_get_rip(struct mce *m, struct pt_regs *regs)
+{
+
+ if (regs && (m->mcgstatus & (MCG_STATUS_RIPV|MCG_STATUS_EIPV))) {
+ m->ip = regs->ip;
+ m->cs = regs->cs;
+ } else {
+ m->ip = 0;
+ m->cs = 0;
+ }
+ if (rip_msr)
+ m->ip = mce_rdmsrl(rip_msr);
+}
+
+#ifdef CONFIG_X86_LOCAL_APIC
+/*
+ * Called after interrupts have been reenabled again
+ * when a MCE happened during an interrupts off region
+ * in the kernel.
+ */
+asmlinkage void smp_mce_self_interrupt(struct pt_regs *regs)
+{
+ ack_APIC_irq();
+ exit_idle();
+ irq_enter();
+ mce_notify_irq();
+ mce_schedule_work();
+ irq_exit();
+}
+#endif
+
+static void mce_report_event(struct pt_regs *regs)
+{
+ if (regs->flags & (X86_VM_MASK|X86_EFLAGS_IF)) {
+ mce_notify_irq();
+ /*
+ * Triggering the work queue here is just an insurance
+ * policy in case the syscall exit notify handler
+ * doesn't run soon enough or ends up running on the
+ * wrong CPU (can happen when audit sleeps)
+ */
+ mce_schedule_work();
+ return;
+ }
+
+#ifdef CONFIG_X86_LOCAL_APIC
+ /*
+ * Without APIC do not notify. The event will be picked
+ * up eventually.
+ */
+ if (!cpu_has_apic)
+ return;
+
+ /*
+ * When interrupts are disabled we cannot use
+ * kernel services safely. Trigger an self interrupt
+ * through the APIC to instead do the notification
+ * after interrupts are reenabled again.
+ */
+ apic->send_IPI_self(MCE_SELF_VECTOR);
+
+ /*
+ * Wait for idle afterwards again so that we don't leave the
+ * APIC in a non idle state because the normal APIC writes
+ * cannot exclude us.
+ */
+ apic_wait_icr_idle();
+#endif
+}
+
+DEFINE_PER_CPU(unsigned, mce_poll_count);
+
+/*
+ * Poll for corrected events or events that happened before reset.
+ * Those are just logged through /dev/mcelog.
+ *
+ * This is executed in standard interrupt context.
+ *
+ * Note: spec recommends to panic for fatal unsignalled
+ * errors here. However this would be quite problematic --
+ * we would need to reimplement the Monarch handling and
+ * it would mess up the exclusion between exception handler
+ * and poll hander -- * so we skip this for now.
+ * These cases should not happen anyways, or only when the CPU
+ * is already totally * confused. In this case it's likely it will
+ * not fully execute the machine check handler either.
+ */
+void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
+{
+ struct mce m;
+ int i;
+
+ __get_cpu_var(mce_poll_count)++;
+
+ mce_setup(&m);
+
+ m.mcgstatus = mce_rdmsrl(MSR_IA32_MCG_STATUS);
+ for (i = 0; i < banks; i++) {
+ if (!bank[i] || !test_bit(i, *b))
+ continue;
+
+ m.misc = 0;
+ m.addr = 0;
+ m.bank = i;
+ m.tsc = 0;
+
+ barrier();
+ m.status = mce_rdmsrl(MSR_IA32_MC0_STATUS + i*4);
+ if (!(m.status & MCI_STATUS_VAL))
+ continue;
+
+ /*
+ * Uncorrected or signalled events are handled by the exception
+ * handler when it is enabled, so don't process those here.
+ *
+ * TBD do the same check for MCI_STATUS_EN here?
+ */
+ if (!(flags & MCP_UC) &&
+ (m.status & (mce_ser ? MCI_STATUS_S : MCI_STATUS_UC)))
+ continue;
+
+ if (m.status & MCI_STATUS_MISCV)
+ m.misc = mce_rdmsrl(MSR_IA32_MC0_MISC + i*4);
+ if (m.status & MCI_STATUS_ADDRV)
+ m.addr = mce_rdmsrl(MSR_IA32_MC0_ADDR + i*4);
+
+ if (!(flags & MCP_TIMESTAMP))
+ m.tsc = 0;
+ /*
+ * Don't get the IP here because it's unlikely to
+ * have anything to do with the actual error location.
+ */
+ if (!(flags & MCP_DONTLOG) && !mce_dont_log_ce) {
+ mce_log(&m);
+ add_taint(TAINT_MACHINE_CHECK);
+ }
+
+ /*
+ * Clear state for this bank.
+ */
+ mce_wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
+ }
+
+ /*
+ * Don't clear MCG_STATUS here because it's only defined for
+ * exceptions.
+ */
+
+ sync_core();
+}
+EXPORT_SYMBOL_GPL(machine_check_poll);
+
+/*
+ * Do a quick check if any of the events requires a panic.
+ * This decides if we keep the events around or clear them.
+ */
+static int mce_no_way_out(struct mce *m, char **msg)
+{
+ int i;
+
+ for (i = 0; i < banks; i++) {
+ m->status = mce_rdmsrl(MSR_IA32_MC0_STATUS + i*4);
+ if (mce_severity(m, tolerant, msg) >= MCE_PANIC_SEVERITY)
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * Variable to establish order between CPUs while scanning.
+ * Each CPU spins initially until executing is equal its number.
+ */
+static atomic_t mce_executing;
+
+/*
+ * Defines order of CPUs on entry. First CPU becomes Monarch.
+ */
+static atomic_t mce_callin;
+
+/*
+ * Check if a timeout waiting for other CPUs happened.
+ */
+static int mce_timed_out(u64 *t)
+{
+ /*
+ * The others already did panic for some reason.
+ * Bail out like in a timeout.
+ * rmb() to tell the compiler that system_state
+ * might have been modified by someone else.
+ */
+ rmb();
+ if (atomic_read(&mce_paniced))
+ wait_for_panic();
+ if (!monarch_timeout)
+ goto out;
+ if ((s64)*t < SPINUNIT) {
+ /* CHECKME: Make panic default for 1 too? */
+ if (tolerant < 1)
+ mce_panic("Timeout synchronizing machine check over CPUs",
+ NULL, NULL);
+ cpu_missing = 1;
+ return 1;
+ }
+ *t -= SPINUNIT;
+out:
+ touch_nmi_watchdog();
+ return 0;
+}
+
+/*
+ * The Monarch's reign. The Monarch is the CPU who entered
+ * the machine check handler first. It waits for the others to
+ * raise the exception too and then grades them. When any
+ * error is fatal panic. Only then let the others continue.
+ *
+ * The other CPUs entering the MCE handler will be controlled by the
+ * Monarch. They are called Subjects.
+ *
+ * This way we prevent any potential data corruption in a unrecoverable case
+ * and also makes sure always all CPU's errors are examined.
+ *
+ * Also this detects the case of an machine check event coming from outer
+ * space (not detected by any CPUs) In this case some external agent wants
+ * us to shut down, so panic too.
+ *
+ * The other CPUs might still decide to panic if the handler happens
+ * in a unrecoverable place, but in this case the system is in a semi-stable
+ * state and won't corrupt anything by itself. It's ok to let the others
+ * continue for a bit first.
+ *
+ * All the spin loops have timeouts; when a timeout happens a CPU
+ * typically elects itself to be Monarch.
+ */
+static void mce_reign(void)
+{
+ int cpu;
+ struct mce *m = NULL;
+ int global_worst = 0;
+ char *msg = NULL;
+ char *nmsg = NULL;
+
+ /*
+ * This CPU is the Monarch and the other CPUs have run
+ * through their handlers.
+ * Grade the severity of the errors of all the CPUs.
+ */
+ for_each_possible_cpu(cpu) {
+ int severity = mce_severity(&per_cpu(mces_seen, cpu), tolerant,
+ &nmsg);
+ if (severity > global_worst) {
+ msg = nmsg;
+ global_worst = severity;
+ m = &per_cpu(mces_seen, cpu);
+ }
+ }
+
+ /*
+ * Cannot recover? Panic here then.
+ * This dumps all the mces in the log buffer and stops the
+ * other CPUs.
+ */
+ if (m && global_worst >= MCE_PANIC_SEVERITY && tolerant < 3)
+ mce_panic("Fatal Machine check", m, msg);
+
+ /*
+ * For UC somewhere we let the CPU who detects it handle it.
+ * Also must let continue the others, otherwise the handling
+ * CPU could deadlock on a lock.
+ */
+
+ /*
+ * No machine check event found. Must be some external
+ * source or one CPU is hung. Panic.
+ */
+ if (!m && tolerant < 3)
+ mce_panic("Machine check from unknown source", NULL, NULL);
+
+ /*
+ * Now clear all the mces_seen so that they don't reappear on
+ * the next mce.
+ */
+ for_each_possible_cpu(cpu)
+ memset(&per_cpu(mces_seen, cpu), 0, sizeof(struct mce));
+}
+
+static atomic_t global_nwo;
+
+/*
+ * Start of Monarch synchronization. This waits until all CPUs have
+ * entered the exception handler and then determines if any of them
+ * saw a fatal event that requires panic. Then it executes them
+ * in the entry order.
+ * TBD double check parallel CPU hotunplug
+ */
+static int mce_start(int no_way_out, int *order)
+{
+ int nwo;
+ int cpus = num_online_cpus();
+ u64 timeout = (u64)monarch_timeout * NSEC_PER_USEC;
+
+ if (!timeout) {
+ *order = -1;
+ return no_way_out;
+ }
+
+ atomic_add(no_way_out, &global_nwo);
+
+ /*
+ * Wait for everyone.
+ */
+ while (atomic_read(&mce_callin) != cpus) {
+ if (mce_timed_out(&timeout)) {
+ atomic_set(&global_nwo, 0);
+ *order = -1;
+ return no_way_out;
+ }
+ ndelay(SPINUNIT);
+ }
+
+ /*
+ * Cache the global no_way_out state.
+ */
+ nwo = atomic_read(&global_nwo);
+
+ /*
+ * Monarch starts executing now, the others wait.
+ */
+ if (*order == 1) {
+ atomic_set(&mce_executing, 1);
+ return nwo;
+ }
+
+ /*
+ * Now start the scanning loop one by one
+ * in the original callin order.
+ * This way when there are any shared banks it will
+ * be only seen by one CPU before cleared, avoiding duplicates.
+ */
+ while (atomic_read(&mce_executing) < *order) {
+ if (mce_timed_out(&timeout)) {
+ atomic_set(&global_nwo, 0);
+ *order = -1;
+ return no_way_out;
+ }
+ ndelay(SPINUNIT);
+ }
+ return nwo;
+}
+
+/*
+ * Synchronize between CPUs after main scanning loop.
+ * This invokes the bulk of the Monarch processing.
+ */
+static int mce_end(int order)
+{
+ int ret = -1;
+ u64 timeout = (u64)monarch_timeout * NSEC_PER_USEC;
+
+ if (!timeout)
+ goto reset;
+ if (order < 0)
+ goto reset;
+
+ /*
+ * Allow others to run.
+ */
+ atomic_inc(&mce_executing);
+
+ if (order == 1) {
+ /* CHECKME: Can this race with a parallel hotplug? */
+ int cpus = num_online_cpus();
+
+ /*
+ * Monarch: Wait for everyone to go through their scanning
+ * loops.
+ */
+ while (atomic_read(&mce_executing) <= cpus) {
+ if (mce_timed_out(&timeout))
+ goto reset;
+ ndelay(SPINUNIT);
+ }
+
+ mce_reign();
+ barrier();
+ ret = 0;
+ } else {
+ /*
+ * Subject: Wait for Monarch to finish.
+ */
+ while (atomic_read(&mce_executing) != 0) {
+ if (mce_timed_out(&timeout))
+ goto reset;
+ ndelay(SPINUNIT);
+ }
+
+ /*
+ * Don't reset anything. That's done by the Monarch.
+ */
+ return 0;
+ }
+
+ /*
+ * Reset all global state.
+ */
+reset:
+ atomic_set(&global_nwo, 0);
+ atomic_set(&mce_callin, 0);
+ barrier();
+
+ /*
+ * Let others run again.
+ */
+ atomic_set(&mce_executing, 0);
+ return ret;
+}
+
+/*
+ * Check if the address reported by the CPU is in a format we can parse.
+ * It would be possible to add code for most other cases, but all would
+ * be somewhat complicated (e.g. segment offset would require an instruction
+ * parser). So only support physical addresses upto page granuality for now.
+ */
+static int mce_usable_address(struct mce *m)
+{
+ if (!(m->status & MCI_STATUS_MISCV) || !(m->status & MCI_STATUS_ADDRV))
+ return 0;
+ if ((m->misc & 0x3f) > PAGE_SHIFT)
+ return 0;
+ if (((m->misc >> 6) & 7) != MCM_ADDR_PHYS)
+ return 0;
+ return 1;
+}
+
+static void mce_clear_state(unsigned long *toclear)
+{
+ int i;
+
+ for (i = 0; i < banks; i++) {
+ if (test_bit(i, toclear))
+ mce_wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
+ }
+}
+
+/*
+ * The actual machine check handler. This only handles real
+ * exceptions when something got corrupted coming in through int 18.
+ *
+ * This is executed in NMI context not subject to normal locking rules. This
+ * implies that most kernel services cannot be safely used. Don't even
+ * think about putting a printk in there!
+ *
+ * On Intel systems this is entered on all CPUs in parallel through
+ * MCE broadcast. However some CPUs might be broken beyond repair,
+ * so be always careful when synchronizing with others.
+ */
+void do_machine_check(struct pt_regs *regs, long error_code)
+{
+ struct mce m, *final;
+ int i;
+ int worst = 0;
+ int severity;
+ /*
+ * Establish sequential order between the CPUs entering the machine
+ * check handler.
+ */
+ int order;
+
+ /*
+ * If no_way_out gets set, there is no safe way to recover from this
+ * MCE. If tolerant is cranked up, we'll try anyway.
+ */
+ int no_way_out = 0;
+ /*
+ * If kill_it gets set, there might be a way to recover from this
+ * error.
+ */
+ int kill_it = 0;
+ DECLARE_BITMAP(toclear, MAX_NR_BANKS);
+ char *msg = "Unknown";
+
+ atomic_inc(&mce_entry);
+
+ __get_cpu_var(mce_exception_count)++;
+
+ if (notify_die(DIE_NMI, "machine check", regs, error_code,
+ 18, SIGKILL) == NOTIFY_STOP)
+ goto out;
+ if (!banks)
+ goto out;
+
+ order = atomic_add_return(1, &mce_callin);
+ mce_setup(&m);
+
+ m.mcgstatus = mce_rdmsrl(MSR_IA32_MCG_STATUS);
+ no_way_out = mce_no_way_out(&m, &msg);
+
+ final = &__get_cpu_var(mces_seen);
+ *final = m;
+
+ barrier();
+
+ /*
+ * When no restart IP must always kill or panic.
+ */
+ if (!(m.mcgstatus & MCG_STATUS_RIPV))
+ kill_it = 1;
+
+ /*
+ * Go through all the banks in exclusion of the other CPUs.
+ * This way we don't report duplicated events on shared banks
+ * because the first one to see it will clear it.
+ */
+ no_way_out = mce_start(no_way_out, &order);
+ for (i = 0; i < banks; i++) {
+ __clear_bit(i, toclear);
+ if (!bank[i])
+ continue;
+
+ m.misc = 0;
+ m.addr = 0;
+ m.bank = i;
+
+ m.status = mce_rdmsrl(MSR_IA32_MC0_STATUS + i*4);
+ if ((m.status & MCI_STATUS_VAL) == 0)
+ continue;
+
+ /*
+ * Non uncorrected or non signaled errors are handled by
+ * machine_check_poll. Leave them alone, unless this panics.
+ */
+ if (!(m.status & (mce_ser ? MCI_STATUS_S : MCI_STATUS_UC)) &&
+ !no_way_out)
+ continue;
+
+ /*
+ * Set taint even when machine check was not enabled.
+ */
+ add_taint(TAINT_MACHINE_CHECK);
+
+ severity = mce_severity(&m, tolerant, NULL);
+
+ /*
+ * When machine check was for corrected handler don't touch,
+ * unless we're panicing.
+ */
+ if (severity == MCE_KEEP_SEVERITY && !no_way_out)
+ continue;
+ __set_bit(i, toclear);
+ if (severity == MCE_NO_SEVERITY) {
+ /*
+ * Machine check event was not enabled. Clear, but
+ * ignore.
+ */
+ continue;
+ }
+
+ /*
+ * Kill on action required.
+ */
+ if (severity == MCE_AR_SEVERITY)
+ kill_it = 1;
+
+ if (m.status & MCI_STATUS_MISCV)
+ m.misc = mce_rdmsrl(MSR_IA32_MC0_MISC + i*4);
+ if (m.status & MCI_STATUS_ADDRV)
+ m.addr = mce_rdmsrl(MSR_IA32_MC0_ADDR + i*4);
+
+ /*
+ * Action optional error. Queue address for later processing.
+ * When the ring overflows we just ignore the AO error.
+ * RED-PEN add some logging mechanism when
+ * usable_address or mce_add_ring fails.
+ * RED-PEN don't ignore overflow for tolerant == 0
+ */
+ if (severity == MCE_AO_SEVERITY && mce_usable_address(&m))
+ mce_ring_add(m.addr >> PAGE_SHIFT);
+
+ mce_get_rip(&m, regs);
+ mce_log(&m);
+
+ if (severity > worst) {
+ *final = m;
+ worst = severity;
+ }
+ }
+
+ if (!no_way_out)
+ mce_clear_state(toclear);
+
+ /*
+ * Do most of the synchronization with other CPUs.
+ * When there's any problem use only local no_way_out state.
+ */
+ if (mce_end(order) < 0)
+ no_way_out = worst >= MCE_PANIC_SEVERITY;
+
+ /*
+ * If we have decided that we just CAN'T continue, and the user
+ * has not set tolerant to an insane level, give up and die.
+ *
+ * This is mainly used in the case when the system doesn't
+ * support MCE broadcasting or it has been disabled.
+ */
+ if (no_way_out && tolerant < 3)
+ mce_panic("Fatal machine check on current CPU", final, msg);
+
+ /*
+ * If the error seems to be unrecoverable, something should be
+ * done. Try to kill as little as possible. If we can kill just
+ * one task, do that. If the user has set the tolerance very
+ * high, don't try to do anything at all.
+ */
+
+ if (kill_it && tolerant < 3)
+ force_sig(SIGBUS, current);
+
+ /* notify userspace ASAP */
+ set_thread_flag(TIF_MCE_NOTIFY);
+
+ if (worst > 0)
+ mce_report_event(regs);
+ mce_wrmsrl(MSR_IA32_MCG_STATUS, 0);
+out:
+ atomic_dec(&mce_entry);
+ sync_core();
+}
+EXPORT_SYMBOL_GPL(do_machine_check);
+
+/* dummy to break dependency. actual code is in mm/memory-failure.c */
+void __attribute__((weak)) memory_failure(unsigned long pfn, int vector)
+{
+ printk(KERN_ERR "Action optional memory failure at %lx ignored\n", pfn);
+}
+
+/*
+ * Called after mce notification in process context. This code
+ * is allowed to sleep. Call the high level VM handler to process
+ * any corrupted pages.
+ * Assume that the work queue code only calls this one at a time
+ * per CPU.
+ * Note we don't disable preemption, so this code might run on the wrong
+ * CPU. In this case the event is picked up by the scheduled work queue.
+ * This is merely a fast path to expedite processing in some common
+ * cases.
+ */
+void mce_notify_process(void)
+{
+ unsigned long pfn;
+ mce_notify_irq();
+ while (mce_ring_get(&pfn))
+ memory_failure(pfn, MCE_VECTOR);
+}
+
+static void mce_process_work(struct work_struct *dummy)
+{
+ mce_notify_process();
+}
+
+#ifdef CONFIG_X86_MCE_INTEL
+/***
+ * mce_log_therm_throt_event - Logs the thermal throttling event to mcelog
+ * @cpu: The CPU on which the event occurred.
+ * @status: Event status information
+ *
+ * This function should be called by the thermal interrupt after the
+ * event has been processed and the decision was made to log the event
+ * further.
+ *
+ * The status parameter will be saved to the 'status' field of 'struct mce'
+ * and historically has been the register value of the
+ * MSR_IA32_THERMAL_STATUS (Intel) msr.
+ */
+void mce_log_therm_throt_event(__u64 status)
+{
+ struct mce m;
+
+ mce_setup(&m);
+ m.bank = MCE_THERMAL_BANK;
+ m.status = status;
+ mce_log(&m);
+}
+#endif /* CONFIG_X86_MCE_INTEL */
+
+/*
+ * Periodic polling timer for "silent" machine check errors. If the
+ * poller finds an MCE, poll 2x faster. When the poller finds no more
+ * errors, poll 2x slower (up to check_interval seconds).
+ */
+static int check_interval = 5 * 60; /* 5 minutes */
+
+static DEFINE_PER_CPU(int, next_interval); /* in jiffies */
+static DEFINE_PER_CPU(struct timer_list, mce_timer);
+
+static void mcheck_timer(unsigned long data)
+{
+ struct timer_list *t = &per_cpu(mce_timer, data);
+ int *n;
+
+ WARN_ON(smp_processor_id() != data);
+
+ if (mce_available(&current_cpu_data)) {
+ machine_check_poll(MCP_TIMESTAMP,
+ &__get_cpu_var(mce_poll_banks));
+ }
+
+ /*
+ * Alert userspace if needed. If we logged an MCE, reduce the
+ * polling interval, otherwise increase the polling interval.
+ */
+ n = &__get_cpu_var(next_interval);
+ if (mce_notify_irq())
+ *n = max(*n/2, HZ/100);
+ else
+ *n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ));
+
+ t->expires = jiffies + *n;
+ add_timer(t);
+}
+
+static void mce_do_trigger(struct work_struct *work)
+{
+ call_usermodehelper(trigger, trigger_argv, NULL, UMH_NO_WAIT);
+}
+
+static DECLARE_WORK(mce_trigger_work, mce_do_trigger);
+
+/*
+ * Notify the user(s) about new machine check events.
+ * Can be called from interrupt context, but not from machine check/NMI
+ * context.
+ */
+int mce_notify_irq(void)
+{
+ /* Not more than two messages every minute */
+ static DEFINE_RATELIMIT_STATE(ratelimit, 60*HZ, 2);
+
+ clear_thread_flag(TIF_MCE_NOTIFY);
+
+ if (test_and_clear_bit(0, &notify_user)) {
+ wake_up_interruptible(&mce_wait);
+
+ /*
+ * There is no risk of missing notifications because
+ * work_pending is always cleared before the function is
+ * executed.
+ */
+ if (trigger[0] && !work_pending(&mce_trigger_work))
+ schedule_work(&mce_trigger_work);
+
+ if (__ratelimit(&ratelimit))
+ printk(KERN_INFO "Machine check events logged\n");
+
+ return 1;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mce_notify_irq);
+
+/*
+ * Initialize Machine Checks for a CPU.
+ */
+static int mce_cap_init(void)
+{
+ unsigned b;
+ u64 cap;
+
+ rdmsrl(MSR_IA32_MCG_CAP, cap);
+
+ b = cap & MCG_BANKCNT_MASK;
+ printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b);
+
+ if (b > MAX_NR_BANKS) {
+ printk(KERN_WARNING
+ "MCE: Using only %u machine check banks out of %u\n",
+ MAX_NR_BANKS, b);
+ b = MAX_NR_BANKS;
+ }
+
+ /* Don't support asymmetric configurations today */
+ WARN_ON(banks != 0 && b != banks);
+ banks = b;
+ if (!bank) {
+ bank = kmalloc(banks * sizeof(u64), GFP_KERNEL);
+ if (!bank)
+ return -ENOMEM;
+ memset(bank, 0xff, banks * sizeof(u64));
+ }
+
+ /* Use accurate RIP reporting if available. */
+ if ((cap & MCG_EXT_P) && MCG_EXT_CNT(cap) >= 9)
+ rip_msr = MSR_IA32_MCG_EIP;
+
+ if (cap & MCG_SER_P)
+ mce_ser = 1;
+
+ return 0;
+}
+
+static void mce_init(void)
+{
+ mce_banks_t all_banks;
+ u64 cap;
+ int i;
+
+ /*
+ * Log the machine checks left over from the previous reset.
+ */
+ bitmap_fill(all_banks, MAX_NR_BANKS);
+ machine_check_poll(MCP_UC|(!mce_bootlog ? MCP_DONTLOG : 0), &all_banks);
+
+ set_in_cr4(X86_CR4_MCE);
+
+ rdmsrl(MSR_IA32_MCG_CAP, cap);
+ if (cap & MCG_CTL_P)
+ wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+
+ for (i = 0; i < banks; i++) {
+ if (skip_bank_init(i))
+ continue;
+ wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]);
+ wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
+ }
+}
+
+/* Add per CPU specific workarounds here */
+static void mce_cpu_quirks(struct cpuinfo_x86 *c)
+{
+ /* This should be disabled by the BIOS, but isn't always */
+ if (c->x86_vendor == X86_VENDOR_AMD) {
+ if (c->x86 == 15 && banks > 4) {
+ /*
+ * disable GART TBL walk error reporting, which
+ * trips off incorrectly with the IOMMU & 3ware
+ * & Cerberus:
+ */
+ clear_bit(10, (unsigned long *)&bank[4]);
+ }
+ if (c->x86 <= 17 && mce_bootlog < 0) {
+ /*
+ * Lots of broken BIOS around that don't clear them
+ * by default and leave crap in there. Don't log:
+ */
+ mce_bootlog = 0;
+ }
+ /*
+ * Various K7s with broken bank 0 around. Always disable
+ * by default.
+ */
+ if (c->x86 == 6)
+ bank[0] = 0;
+ }
+
+ if (c->x86_vendor == X86_VENDOR_INTEL) {
+ /*
+ * SDM documents that on family 6 bank 0 should not be written
+ * because it aliases to another special BIOS controlled
+ * register.
+ * But it's not aliased anymore on model 0x1a+
+ * Don't ignore bank 0 completely because there could be a
+ * valid event later, merely don't write CTL0.
+ */
+
+ if (c->x86 == 6 && c->x86_model < 0x1A)
+ __set_bit(0, &dont_init_banks);
+
+ /*
+ * All newer Intel systems support MCE broadcasting. Enable
+ * synchronization with a one second timeout.
+ */
+ if ((c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xe)) &&
+ monarch_timeout < 0)
+ monarch_timeout = USEC_PER_SEC;
+ }
+ if (monarch_timeout < 0)
+ monarch_timeout = 0;
+ if (mce_bootlog != 0)
+ mce_panic_timeout = 30;
+}
+
+static void __cpuinit mce_ancient_init(struct cpuinfo_x86 *c)
+{
+ if (c->x86 != 5)
+ return;
+ switch (c->x86_vendor) {
+ case X86_VENDOR_INTEL:
+ if (mce_p5_enabled())
+ intel_p5_mcheck_init(c);
+ break;
+ case X86_VENDOR_CENTAUR:
+ winchip_mcheck_init(c);
+ break;
+ }
+}
+
+static void mce_cpu_features(struct cpuinfo_x86 *c)
+{
+ switch (c->x86_vendor) {
+ case X86_VENDOR_INTEL:
+ mce_intel_feature_init(c);
+ break;
+ case X86_VENDOR_AMD:
+ mce_amd_feature_init(c);
+ break;
+ default:
+ break;
+ }
+}
+
+static void mce_init_timer(void)
+{
+ struct timer_list *t = &__get_cpu_var(mce_timer);
+ int *n = &__get_cpu_var(next_interval);
+
+ if (mce_ignore_ce)
+ return;
+
+ *n = check_interval * HZ;
+ if (!*n)
+ return;
+ setup_timer(t, mcheck_timer, smp_processor_id());
+ t->expires = round_jiffies(jiffies + *n);
+ add_timer(t);
+}
+
+/*
+ * Called for each booted CPU to set up machine checks.
+ * Must be called with preempt off:
+ */
+void __cpuinit mcheck_init(struct cpuinfo_x86 *c)
+{
+ if (mce_disabled)
+ return;
+
+ mce_ancient_init(c);
+
+ if (!mce_available(c))
+ return;
+
+ if (mce_cap_init() < 0) {
+ mce_disabled = 1;
+ return;
+ }
+ mce_cpu_quirks(c);
+
+ machine_check_vector = do_machine_check;
+
+ mce_init();
+ mce_cpu_features(c);
+ mce_init_timer();
+ INIT_WORK(&__get_cpu_var(mce_work), mce_process_work);
+}
+
+/*
+ * Character device to read and clear the MCE log.
+ */
+
+static DEFINE_SPINLOCK(mce_state_lock);
+static int open_count; /* #times opened */
+static int open_exclu; /* already open exclusive? */
+
+static int mce_open(struct inode *inode, struct file *file)
+{
+ spin_lock(&mce_state_lock);
+
+ if (open_exclu || (open_count && (file->f_flags & O_EXCL))) {
+ spin_unlock(&mce_state_lock);
+
+ return -EBUSY;
+ }
+
+ if (file->f_flags & O_EXCL)
+ open_exclu = 1;
+ open_count++;
+
+ spin_unlock(&mce_state_lock);
+
+ return nonseekable_open(inode, file);
+}
+
+static int mce_release(struct inode *inode, struct file *file)
+{
+ spin_lock(&mce_state_lock);
+
+ open_count--;
+ open_exclu = 0;
+
+ spin_unlock(&mce_state_lock);
+
+ return 0;
+}
+
+static void collect_tscs(void *data)
+{
+ unsigned long *cpu_tsc = (unsigned long *)data;
+
+ rdtscll(cpu_tsc[smp_processor_id()]);
+}
+
+static DEFINE_MUTEX(mce_read_mutex);
+
+static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
+ loff_t *off)
+{
+ char __user *buf = ubuf;
+ unsigned long *cpu_tsc;
+ unsigned prev, next;
+ int i, err;
+
+ cpu_tsc = kmalloc(nr_cpu_ids * sizeof(long), GFP_KERNEL);
+ if (!cpu_tsc)
+ return -ENOMEM;
+
+ mutex_lock(&mce_read_mutex);
+ next = rcu_dereference(mcelog.next);
+
+ /* Only supports full reads right now */
+ if (*off != 0 || usize < MCE_LOG_LEN*sizeof(struct mce)) {
+ mutex_unlock(&mce_read_mutex);
+ kfree(cpu_tsc);
+
+ return -EINVAL;
+ }
+
+ err = 0;
+ prev = 0;
+ do {
+ for (i = prev; i < next; i++) {
+ unsigned long start = jiffies;
+
+ while (!mcelog.entry[i].finished) {
+ if (time_after_eq(jiffies, start + 2)) {
+ memset(mcelog.entry + i, 0,
+ sizeof(struct mce));
+ goto timeout;
+ }
+ cpu_relax();
+ }
+ smp_rmb();
+ err |= copy_to_user(buf, mcelog.entry + i,
+ sizeof(struct mce));
+ buf += sizeof(struct mce);
+timeout:
+ ;
+ }
+
+ memset(mcelog.entry + prev, 0,
+ (next - prev) * sizeof(struct mce));
+ prev = next;
+ next = cmpxchg(&mcelog.next, prev, 0);
+ } while (next != prev);
+
+ synchronize_sched();
+
+ /*
+ * Collect entries that were still getting written before the
+ * synchronize.
+ */
+ on_each_cpu(collect_tscs, cpu_tsc, 1);
+
+ for (i = next; i < MCE_LOG_LEN; i++) {
+ if (mcelog.entry[i].finished &&
+ mcelog.entry[i].tsc < cpu_tsc[mcelog.entry[i].cpu]) {
+ err |= copy_to_user(buf, mcelog.entry+i,
+ sizeof(struct mce));
+ smp_rmb();
+ buf += sizeof(struct mce);
+ memset(&mcelog.entry[i], 0, sizeof(struct mce));
+ }
+ }
+ mutex_unlock(&mce_read_mutex);
+ kfree(cpu_tsc);
+
+ return err ? -EFAULT : buf - ubuf;
+}
+
+static unsigned int mce_poll(struct file *file, poll_table *wait)
+{
+ poll_wait(file, &mce_wait, wait);
+ if (rcu_dereference(mcelog.next))
+ return POLLIN | POLLRDNORM;
+ return 0;
+}
+
+static long mce_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
+{
+ int __user *p = (int __user *)arg;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ switch (cmd) {
+ case MCE_GET_RECORD_LEN:
+ return put_user(sizeof(struct mce), p);
+ case MCE_GET_LOG_LEN:
+ return put_user(MCE_LOG_LEN, p);
+ case MCE_GETCLEAR_FLAGS: {
+ unsigned flags;
+
+ do {
+ flags = mcelog.flags;
+ } while (cmpxchg(&mcelog.flags, flags, 0) != flags);
+
+ return put_user(flags, p);
+ }
+ default:
+ return -ENOTTY;
+ }
+}
+
+/* Modified in mce-inject.c, so not static or const */
+struct file_operations mce_chrdev_ops = {
+ .open = mce_open,
+ .release = mce_release,
+ .read = mce_read,
+ .poll = mce_poll,
+ .unlocked_ioctl = mce_ioctl,
+};
+EXPORT_SYMBOL_GPL(mce_chrdev_ops);
+
+static struct miscdevice mce_log_device = {
+ MISC_MCELOG_MINOR,
+ "mcelog",
+ &mce_chrdev_ops,
+};
+
+/*
+ * mce=off Disables machine check
+ * mce=no_cmci Disables CMCI
+ * mce=dont_log_ce Clears corrected events silently, no log created for CEs.
+ * mce=ignore_ce Disables polling and CMCI, corrected events are not cleared.
+ * mce=TOLERANCELEVEL[,monarchtimeout] (number, see above)
+ * monarchtimeout is how long to wait for other CPUs on machine
+ * check, or 0 to not wait
+ * mce=bootlog Log MCEs from before booting. Disabled by default on AMD.
+ * mce=nobootlog Don't log MCEs from before booting.
+ */
+static int __init mcheck_enable(char *str)
+{
+ if (*str == 0)
+ enable_p5_mce();
+ if (*str == '=')
+ str++;
+ if (!strcmp(str, "off"))
+ mce_disabled = 1;
+ else if (!strcmp(str, "no_cmci"))
+ mce_cmci_disabled = 1;
+ else if (!strcmp(str, "dont_log_ce"))
+ mce_dont_log_ce = 1;
+ else if (!strcmp(str, "ignore_ce"))
+ mce_ignore_ce = 1;
+ else if (!strcmp(str, "bootlog") || !strcmp(str, "nobootlog"))
+ mce_bootlog = (str[0] == 'b');
+ else if (isdigit(str[0])) {
+ get_option(&str, &tolerant);
+ if (*str == ',') {
+ ++str;
+ get_option(&str, &monarch_timeout);
+ }
+ } else {
+ printk(KERN_INFO "mce argument %s ignored. Please use /sys\n",
+ str);
+ return 0;
+ }
+ return 1;
+}
+__setup("mce", mcheck_enable);
+
+/*
+ * Sysfs support
+ */
+
+/*
+ * Disable machine checks on suspend and shutdown. We can't really handle
+ * them later.
+ */
+static int mce_disable(void)
+{
+ int i;
+
+ for (i = 0; i < banks; i++) {
+ if (!skip_bank_init(i))
+ wrmsrl(MSR_IA32_MC0_CTL + i*4, 0);
+ }
+ return 0;
+}
+
+static int mce_suspend(struct sys_device *dev, pm_message_t state)
+{
+ return mce_disable();
+}
+
+static int mce_shutdown(struct sys_device *dev)
+{
+ return mce_disable();
+}
+
+/*
+ * On resume clear all MCE state. Don't want to see leftovers from the BIOS.
+ * Only one CPU is active at this time, the others get re-added later using
+ * CPU hotplug:
+ */
+static int mce_resume(struct sys_device *dev)
+{
+ mce_init();
+ mce_cpu_features(&current_cpu_data);
+
+ return 0;
+}
+
+static void mce_cpu_restart(void *data)
+{
+ del_timer_sync(&__get_cpu_var(mce_timer));
+ if (mce_available(&current_cpu_data))
+ mce_init();
+ mce_init_timer();
+}
+
+/* Reinit MCEs after user configuration changes */
+static void mce_restart(void)
+{
+ on_each_cpu(mce_cpu_restart, NULL, 1);
+}
+
+static struct sysdev_class mce_sysclass = {
+ .suspend = mce_suspend,
+ .shutdown = mce_shutdown,
+ .resume = mce_resume,
+ .name = "machinecheck",
+};
+
+DEFINE_PER_CPU(struct sys_device, mce_dev);
+
+__cpuinitdata
+void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
+
+static struct sysdev_attribute *bank_attrs;
+
+static ssize_t show_bank(struct sys_device *s, struct sysdev_attribute *attr,
+ char *buf)
+{
+ u64 b = bank[attr - bank_attrs];
+
+ return sprintf(buf, "%llx\n", b);
+}
+
+static ssize_t set_bank(struct sys_device *s, struct sysdev_attribute *attr,
+ const char *buf, size_t size)
+{
+ u64 new;
+
+ if (strict_strtoull(buf, 0, &new) < 0)
+ return -EINVAL;
+
+ bank[attr - bank_attrs] = new;
+ mce_restart();
+
+ return size;
+}
+
+static ssize_t
+show_trigger(struct sys_device *s, struct sysdev_attribute *attr, char *buf)
+{
+ strcpy(buf, trigger);
+ strcat(buf, "\n");
+ return strlen(trigger) + 1;
+}
+
+static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
+ const char *buf, size_t siz)
+{
+ char *p;
+ int len;
+
+ strncpy(trigger, buf, sizeof(trigger));
+ trigger[sizeof(trigger)-1] = 0;
+ len = strlen(trigger);
+ p = strchr(trigger, '\n');
+
+ if (*p)
+ *p = 0;
+
+ return len;
+}
+
+static ssize_t store_int_with_restart(struct sys_device *s,
+ struct sysdev_attribute *attr,
+ const char *buf, size_t size)
+{
+ ssize_t ret = sysdev_store_int(s, attr, buf, size);
+ mce_restart();
+ return ret;
+}
+
+static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger);
+static SYSDEV_INT_ATTR(tolerant, 0644, tolerant);
+static SYSDEV_INT_ATTR(monarch_timeout, 0644, monarch_timeout);
+
+static struct sysdev_ext_attribute attr_check_interval = {
+ _SYSDEV_ATTR(check_interval, 0644, sysdev_show_int,
+ store_int_with_restart),
+ &check_interval
+};
+
+static struct sysdev_attribute *mce_attrs[] = {
+ &attr_tolerant.attr, &attr_check_interval.attr, &attr_trigger,
+ &attr_monarch_timeout.attr,
+ NULL
+};
+
+static cpumask_var_t mce_dev_initialized;
+
+/* Per cpu sysdev init. All of the cpus still share the same ctrl bank: */
+static __cpuinit int mce_create_device(unsigned int cpu)
+{
+ int err;
+ int i;
+
+ if (!mce_available(&boot_cpu_data))
+ return -EIO;
+
+ memset(&per_cpu(mce_dev, cpu).kobj, 0, sizeof(struct kobject));
+ per_cpu(mce_dev, cpu).id = cpu;
+ per_cpu(mce_dev, cpu).cls = &mce_sysclass;
+
+ err = sysdev_register(&per_cpu(mce_dev, cpu));
+ if (err)
+ return err;
+
+ for (i = 0; mce_attrs[i]; i++) {
+ err = sysdev_create_file(&per_cpu(mce_dev, cpu), mce_attrs[i]);
+ if (err)
+ goto error;
+ }
+ for (i = 0; i < banks; i++) {
+ err = sysdev_create_file(&per_cpu(mce_dev, cpu),
+ &bank_attrs[i]);
+ if (err)
+ goto error2;
+ }
+ cpumask_set_cpu(cpu, mce_dev_initialized);
+
+ return 0;
+error2:
+ while (--i >= 0)
+ sysdev_remove_file(&per_cpu(mce_dev, cpu), &bank_attrs[i]);
+error:
+ while (--i >= 0)
+ sysdev_remove_file(&per_cpu(mce_dev, cpu), mce_attrs[i]);
+
+ sysdev_unregister(&per_cpu(mce_dev, cpu));
+
+ return err;
+}
+
+static __cpuinit void mce_remove_device(unsigned int cpu)
+{
+ int i;
+
+ if (!cpumask_test_cpu(cpu, mce_dev_initialized))
+ return;
+
+ for (i = 0; mce_attrs[i]; i++)
+ sysdev_remove_file(&per_cpu(mce_dev, cpu), mce_attrs[i]);
+
+ for (i = 0; i < banks; i++)
+ sysdev_remove_file(&per_cpu(mce_dev, cpu), &bank_attrs[i]);
+
+ sysdev_unregister(&per_cpu(mce_dev, cpu));
+ cpumask_clear_cpu(cpu, mce_dev_initialized);
+}
+
+/* Make sure there are no machine checks on offlined CPUs. */
+static void mce_disable_cpu(void *h)
+{
+ unsigned long action = *(unsigned long *)h;
+ int i;
+
+ if (!mce_available(&current_cpu_data))
+ return;
+ if (!(action & CPU_TASKS_FROZEN))
+ cmci_clear();
+ for (i = 0; i < banks; i++) {
+ if (!skip_bank_init(i))
+ wrmsrl(MSR_IA32_MC0_CTL + i*4, 0);
+ }
+}
+
+static void mce_reenable_cpu(void *h)
+{
+ unsigned long action = *(unsigned long *)h;
+ int i;
+
+ if (!mce_available(&current_cpu_data))
+ return;
+
+ if (!(action & CPU_TASKS_FROZEN))
+ cmci_reenable();
+ for (i = 0; i < banks; i++) {
+ if (!skip_bank_init(i))
+ wrmsrl(MSR_IA32_MC0_CTL + i*4, bank[i]);
+ }
+}
+
+/* Get notified when a cpu comes on/off. Be hotplug friendly. */
+static int __cpuinit
+mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned long)hcpu;
+ struct timer_list *t = &per_cpu(mce_timer, cpu);
+
+ switch (action) {
+ case CPU_ONLINE:
+ case CPU_ONLINE_FROZEN:
+ mce_create_device(cpu);
+ if (threshold_cpu_callback)
+ threshold_cpu_callback(action, cpu);
+ break;
+ case CPU_DEAD:
+ case CPU_DEAD_FROZEN:
+ if (threshold_cpu_callback)
+ threshold_cpu_callback(action, cpu);
+ mce_remove_device(cpu);
+ break;
+ case CPU_DOWN_PREPARE:
+ case CPU_DOWN_PREPARE_FROZEN:
+ del_timer_sync(t);
+ smp_call_function_single(cpu, mce_disable_cpu, &action, 1);
+ break;
+ case CPU_DOWN_FAILED:
+ case CPU_DOWN_FAILED_FROZEN:
+ t->expires = round_jiffies(jiffies +
+ __get_cpu_var(next_interval));
+ add_timer_on(t, cpu);
+ smp_call_function_single(cpu, mce_reenable_cpu, &action, 1);
+ break;
+ case CPU_POST_DEAD:
+ /* intentionally ignoring frozen here */
+ cmci_rediscover(cpu);
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block mce_cpu_notifier __cpuinitdata = {
+ .notifier_call = mce_cpu_callback,
+};
+
+static __init int mce_init_banks(void)
+{
+ int i;
+
+ bank_attrs = kzalloc(sizeof(struct sysdev_attribute) * banks,
+ GFP_KERNEL);
+ if (!bank_attrs)
+ return -ENOMEM;
+
+ for (i = 0; i < banks; i++) {
+ struct sysdev_attribute *a = &bank_attrs[i];
+
+ a->attr.name = kasprintf(GFP_KERNEL, "bank%d", i);
+ if (!a->attr.name)
+ goto nomem;
+
+ a->attr.mode = 0644;
+ a->show = show_bank;
+ a->store = set_bank;
+ }
+ return 0;
+
+nomem:
+ while (--i >= 0)
+ kfree(bank_attrs[i].attr.name);
+ kfree(bank_attrs);
+ bank_attrs = NULL;
+
+ return -ENOMEM;
+}
+
+static __init int mce_init_device(void)
+{
+ int err;
+ int i = 0;
+
+ if (!mce_available(&boot_cpu_data))
+ return -EIO;
+
+ alloc_cpumask_var(&mce_dev_initialized, GFP_KERNEL);
+
+ err = mce_init_banks();
+ if (err)
+ return err;
+
+ err = sysdev_class_register(&mce_sysclass);
+ if (err)
+ return err;
+
+ for_each_online_cpu(i) {
+ err = mce_create_device(i);
+ if (err)
+ return err;
+ }
+
+ register_hotcpu_notifier(&mce_cpu_notifier);
+ misc_register(&mce_log_device);
+
+ return err;
+}
+
+device_initcall(mce_init_device);
+
+#else /* CONFIG_X86_OLD_MCE: */
+
+int nr_mce_banks;
+EXPORT_SYMBOL_GPL(nr_mce_banks); /* non-fatal.o */
+
+/* This has to be run for each processor */
+void mcheck_init(struct cpuinfo_x86 *c)
+{
+ if (mce_disabled == 1)
+ return;
+
+ switch (c->x86_vendor) {
+ case X86_VENDOR_AMD:
+ amd_mcheck_init(c);
+ break;
+
+ case X86_VENDOR_INTEL:
+ if (c->x86 == 5)
+ intel_p5_mcheck_init(c);
+ if (c->x86 == 6)
+ intel_p6_mcheck_init(c);
+ if (c->x86 == 15)
+ intel_p4_mcheck_init(c);
+ break;
+
+ case X86_VENDOR_CENTAUR:
+ if (c->x86 == 5)
+ winchip_mcheck_init(c);
+ break;
+
+ default:
+ break;
+ }
+ printk(KERN_INFO "mce: CPU supports %d MCE banks\n", nr_mce_banks);
+}
+
+static int __init mcheck_enable(char *str)
+{
+ mce_disabled = -1;
+ return 1;
+}
+
+__setup("mce", mcheck_enable);
+
+#endif /* CONFIG_X86_OLD_MCE */
+
+/*
+ * Old style boot options parsing. Only for compatibility.
+ */
+static int __init mcheck_disable(char *str)
+{
+ mce_disabled = 1;
+ return 1;
+}
+__setup("nomce", mcheck_disable);
diff --git a/arch/x86/kernel/cpu/mcheck/mce.h b/arch/x86/kernel/cpu/mcheck/mce.h
index ae9f628838f1..84a552b458c8 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.h
+++ b/arch/x86/kernel/cpu/mcheck/mce.h
@@ -1,14 +1,38 @@
#include <linux/init.h>
#include <asm/mce.h>
+#ifdef CONFIG_X86_OLD_MCE
void amd_mcheck_init(struct cpuinfo_x86 *c);
void intel_p4_mcheck_init(struct cpuinfo_x86 *c);
-void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
void intel_p6_mcheck_init(struct cpuinfo_x86 *c);
+#endif
+
+#ifdef CONFIG_X86_ANCIENT_MCE
+void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
void winchip_mcheck_init(struct cpuinfo_x86 *c);
+extern int mce_p5_enable;
+static inline int mce_p5_enabled(void) { return mce_p5_enable; }
+static inline void enable_p5_mce(void) { mce_p5_enable = 1; }
+#else
+static inline void intel_p5_mcheck_init(struct cpuinfo_x86 *c) {}
+static inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {}
+static inline int mce_p5_enabled(void) { return 0; }
+static inline void enable_p5_mce(void) { }
+#endif
/* Call the installed machine check handler for this CPU setup. */
extern void (*machine_check_vector)(struct pt_regs *, long error_code);
+#ifdef CONFIG_X86_OLD_MCE
+
extern int nr_mce_banks;
+void intel_set_thermal_handler(void);
+
+#else
+
+static inline void intel_set_thermal_handler(void) { }
+
+#endif
+
+void intel_init_thermal(struct cpuinfo_x86 *c);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_32.c b/arch/x86/kernel/cpu/mcheck/mce_32.c
deleted file mode 100644
index 3552119b091d..000000000000
--- a/arch/x86/kernel/cpu/mcheck/mce_32.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * mce.c - x86 Machine Check Exception Reporting
- * (c) 2002 Alan Cox <alan@lxorguk.ukuu.org.uk>, Dave Jones <davej@redhat.com>
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/smp.h>
-#include <linux/thread_info.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/mce.h>
-
-#include "mce.h"
-
-int mce_disabled;
-int nr_mce_banks;
-
-EXPORT_SYMBOL_GPL(nr_mce_banks); /* non-fatal.o */
-
-/* Handle unconfigured int18 (should never happen) */
-static void unexpected_machine_check(struct pt_regs *regs, long error_code)
-{
- printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n", smp_processor_id());
-}
-
-/* Call the installed machine check handler for this CPU setup. */
-void (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check;
-
-/* This has to be run for each processor */
-void mcheck_init(struct cpuinfo_x86 *c)
-{
- if (mce_disabled == 1)
- return;
-
- switch (c->x86_vendor) {
- case X86_VENDOR_AMD:
- amd_mcheck_init(c);
- break;
-
- case X86_VENDOR_INTEL:
- if (c->x86 == 5)
- intel_p5_mcheck_init(c);
- if (c->x86 == 6)
- intel_p6_mcheck_init(c);
- if (c->x86 == 15)
- intel_p4_mcheck_init(c);
- break;
-
- case X86_VENDOR_CENTAUR:
- if (c->x86 == 5)
- winchip_mcheck_init(c);
- break;
-
- default:
- break;
- }
-}
-
-static int __init mcheck_disable(char *str)
-{
- mce_disabled = 1;
- return 1;
-}
-
-static int __init mcheck_enable(char *str)
-{
- mce_disabled = -1;
- return 1;
-}
-
-__setup("nomce", mcheck_disable);
-__setup("mce", mcheck_enable);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
deleted file mode 100644
index 289cc4815028..000000000000
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ /dev/null
@@ -1,1188 +0,0 @@
-/*
- * Machine check handler.
- * K8 parts Copyright 2002,2003 Andi Kleen, SuSE Labs.
- * Rest from unknown author(s).
- * 2004 Andi Kleen. Rewrote most of it.
- * Copyright 2008 Intel Corporation
- * Author: Andi Kleen
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/smp_lock.h>
-#include <linux/string.h>
-#include <linux/rcupdate.h>
-#include <linux/kallsyms.h>
-#include <linux/sysdev.h>
-#include <linux/miscdevice.h>
-#include <linux/fs.h>
-#include <linux/capability.h>
-#include <linux/cpu.h>
-#include <linux/percpu.h>
-#include <linux/poll.h>
-#include <linux/thread_info.h>
-#include <linux/ctype.h>
-#include <linux/kmod.h>
-#include <linux/kdebug.h>
-#include <linux/kobject.h>
-#include <linux/sysfs.h>
-#include <linux/ratelimit.h>
-#include <asm/processor.h>
-#include <asm/msr.h>
-#include <asm/mce.h>
-#include <asm/uaccess.h>
-#include <asm/smp.h>
-#include <asm/idle.h>
-
-#define MISC_MCELOG_MINOR 227
-
-atomic_t mce_entry;
-
-static int mce_dont_init;
-
-/*
- * Tolerant levels:
- * 0: always panic on uncorrected errors, log corrected errors
- * 1: panic or SIGBUS on uncorrected errors, log corrected errors
- * 2: SIGBUS or log uncorrected errors (if possible), log corrected errors
- * 3: never panic or SIGBUS, log all errors (for testing only)
- */
-static int tolerant = 1;
-static int banks;
-static u64 *bank;
-static unsigned long notify_user;
-static int rip_msr;
-static int mce_bootlog = -1;
-static atomic_t mce_events;
-
-static char trigger[128];
-static char *trigger_argv[2] = { trigger, NULL };
-
-static DECLARE_WAIT_QUEUE_HEAD(mce_wait);
-
-/* MCA banks polled by the period polling timer for corrected events */
-DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
- [0 ... BITS_TO_LONGS(MAX_NR_BANKS)-1] = ~0UL
-};
-
-/* Do initial initialization of a struct mce */
-void mce_setup(struct mce *m)
-{
- memset(m, 0, sizeof(struct mce));
- m->cpu = smp_processor_id();
- rdtscll(m->tsc);
-}
-
-/*
- * Lockless MCE logging infrastructure.
- * This avoids deadlocks on printk locks without having to break locks. Also
- * separate MCEs from kernel messages to avoid bogus bug reports.
- */
-
-static struct mce_log mcelog = {
- MCE_LOG_SIGNATURE,
- MCE_LOG_LEN,
-};
-
-void mce_log(struct mce *mce)
-{
- unsigned next, entry;
- atomic_inc(&mce_events);
- mce->finished = 0;
- wmb();
- for (;;) {
- entry = rcu_dereference(mcelog.next);
- for (;;) {
- /* When the buffer fills up discard new entries. Assume
- that the earlier errors are the more interesting. */
- if (entry >= MCE_LOG_LEN) {
- set_bit(MCE_OVERFLOW, (unsigned long *)&mcelog.flags);
- return;
- }
- /* Old left over entry. Skip. */
- if (mcelog.entry[entry].finished) {
- entry++;
- continue;
- }
- break;
- }
- smp_rmb();
- next = entry + 1;
- if (cmpxchg(&mcelog.next, entry, next) == entry)
- break;
- }
- memcpy(mcelog.entry + entry, mce, sizeof(struct mce));
- wmb();
- mcelog.entry[entry].finished = 1;
- wmb();
-
- set_bit(0, &notify_user);
-}
-
-static void print_mce(struct mce *m)
-{
- printk(KERN_EMERG "\n"
- KERN_EMERG "HARDWARE ERROR\n"
- KERN_EMERG
- "CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n",
- m->cpu, m->mcgstatus, m->bank, m->status);
- if (m->ip) {
- printk(KERN_EMERG "RIP%s %02x:<%016Lx> ",
- !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "",
- m->cs, m->ip);
- if (m->cs == __KERNEL_CS)
- print_symbol("{%s}", m->ip);
- printk("\n");
- }
- printk(KERN_EMERG "TSC %llx ", m->tsc);
- if (m->addr)
- printk("ADDR %llx ", m->addr);
- if (m->misc)
- printk("MISC %llx ", m->misc);
- printk("\n");
- printk(KERN_EMERG "This is not a software problem!\n");
- printk(KERN_EMERG "Run through mcelog --ascii to decode "
- "and contact your hardware vendor\n");
-}
-
-static void mce_panic(char *msg, struct mce *backup, unsigned long start)
-{
- int i;
-
- oops_begin();
- for (i = 0; i < MCE_LOG_LEN; i++) {
- unsigned long tsc = mcelog.entry[i].tsc;
-
- if (time_before(tsc, start))
- continue;
- print_mce(&mcelog.entry[i]);
- if (backup && mcelog.entry[i].tsc == backup->tsc)
- backup = NULL;
- }
- if (backup)
- print_mce(backup);
- panic(msg);
-}
-
-int mce_available(struct cpuinfo_x86 *c)
-{
- if (mce_dont_init)
- return 0;
- return cpu_has(c, X86_FEATURE_MCE) && cpu_has(c, X86_FEATURE_MCA);
-}
-
-static inline void mce_get_rip(struct mce *m, struct pt_regs *regs)
-{
- if (regs && (m->mcgstatus & MCG_STATUS_RIPV)) {
- m->ip = regs->ip;
- m->cs = regs->cs;
- } else {
- m->ip = 0;
- m->cs = 0;
- }
- if (rip_msr) {
- /* Assume the RIP in the MSR is exact. Is this true? */
- m->mcgstatus |= MCG_STATUS_EIPV;
- rdmsrl(rip_msr, m->ip);
- m->cs = 0;
- }
-}
-
-/*
- * Poll for corrected events or events that happened before reset.
- * Those are just logged through /dev/mcelog.
- *
- * This is executed in standard interrupt context.
- */
-void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
-{
- struct mce m;
- int i;
-
- mce_setup(&m);
-
- rdmsrl(MSR_IA32_MCG_STATUS, m.mcgstatus);
- for (i = 0; i < banks; i++) {
- if (!bank[i] || !test_bit(i, *b))
- continue;
-
- m.misc = 0;
- m.addr = 0;
- m.bank = i;
- m.tsc = 0;
-
- barrier();
- rdmsrl(MSR_IA32_MC0_STATUS + i*4, m.status);
- if (!(m.status & MCI_STATUS_VAL))
- continue;
-
- /*
- * Uncorrected events are handled by the exception handler
- * when it is enabled. But when the exception is disabled log
- * everything.
- *
- * TBD do the same check for MCI_STATUS_EN here?
- */
- if ((m.status & MCI_STATUS_UC) && !(flags & MCP_UC))
- continue;
-
- if (m.status & MCI_STATUS_MISCV)
- rdmsrl(MSR_IA32_MC0_MISC + i*4, m.misc);
- if (m.status & MCI_STATUS_ADDRV)
- rdmsrl(MSR_IA32_MC0_ADDR + i*4, m.addr);
-
- if (!(flags & MCP_TIMESTAMP))
- m.tsc = 0;
- /*
- * Don't get the IP here because it's unlikely to
- * have anything to do with the actual error location.
- */
- if (!(flags & MCP_DONTLOG)) {
- mce_log(&m);
- add_taint(TAINT_MACHINE_CHECK);
- }
-
- /*
- * Clear state for this bank.
- */
- wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
- }
-
- /*
- * Don't clear MCG_STATUS here because it's only defined for
- * exceptions.
- */
-}
-
-/*
- * The actual machine check handler. This only handles real
- * exceptions when something got corrupted coming in through int 18.
- *
- * This is executed in NMI context not subject to normal locking rules. This
- * implies that most kernel services cannot be safely used. Don't even
- * think about putting a printk in there!
- */
-void do_machine_check(struct pt_regs * regs, long error_code)
-{
- struct mce m, panicm;
- u64 mcestart = 0;
- int i;
- int panicm_found = 0;
- /*
- * If no_way_out gets set, there is no safe way to recover from this
- * MCE. If tolerant is cranked up, we'll try anyway.
- */
- int no_way_out = 0;
- /*
- * If kill_it gets set, there might be a way to recover from this
- * error.
- */
- int kill_it = 0;
- DECLARE_BITMAP(toclear, MAX_NR_BANKS);
-
- atomic_inc(&mce_entry);
-
- if (notify_die(DIE_NMI, "machine check", regs, error_code,
- 18, SIGKILL) == NOTIFY_STOP)
- goto out2;
- if (!banks)
- goto out2;
-
- mce_setup(&m);
-
- rdmsrl(MSR_IA32_MCG_STATUS, m.mcgstatus);
- /* if the restart IP is not valid, we're done for */
- if (!(m.mcgstatus & MCG_STATUS_RIPV))
- no_way_out = 1;
-
- rdtscll(mcestart);
- barrier();
-
- for (i = 0; i < banks; i++) {
- __clear_bit(i, toclear);
- if (!bank[i])
- continue;
-
- m.misc = 0;
- m.addr = 0;
- m.bank = i;
-
- rdmsrl(MSR_IA32_MC0_STATUS + i*4, m.status);
- if ((m.status & MCI_STATUS_VAL) == 0)
- continue;
-
- /*
- * Non uncorrected errors are handled by machine_check_poll
- * Leave them alone.
- */
- if ((m.status & MCI_STATUS_UC) == 0)
- continue;
-
- /*
- * Set taint even when machine check was not enabled.
- */
- add_taint(TAINT_MACHINE_CHECK);
-
- __set_bit(i, toclear);
-
- if (m.status & MCI_STATUS_EN) {
- /* if PCC was set, there's no way out */
- no_way_out |= !!(m.status & MCI_STATUS_PCC);
- /*
- * If this error was uncorrectable and there was
- * an overflow, we're in trouble. If no overflow,
- * we might get away with just killing a task.
- */
- if (m.status & MCI_STATUS_UC) {
- if (tolerant < 1 || m.status & MCI_STATUS_OVER)
- no_way_out = 1;
- kill_it = 1;
- }
- } else {
- /*
- * Machine check event was not enabled. Clear, but
- * ignore.
- */
- continue;
- }
-
- if (m.status & MCI_STATUS_MISCV)
- rdmsrl(MSR_IA32_MC0_MISC + i*4, m.misc);
- if (m.status & MCI_STATUS_ADDRV)
- rdmsrl(MSR_IA32_MC0_ADDR + i*4, m.addr);
-
- mce_get_rip(&m, regs);
- mce_log(&m);
-
- /* Did this bank cause the exception? */
- /* Assume that the bank with uncorrectable errors did it,
- and that there is only a single one. */
- if ((m.status & MCI_STATUS_UC) && (m.status & MCI_STATUS_EN)) {
- panicm = m;
- panicm_found = 1;
- }
- }
-
- /* If we didn't find an uncorrectable error, pick
- the last one (shouldn't happen, just being safe). */
- if (!panicm_found)
- panicm = m;
-
- /*
- * If we have decided that we just CAN'T continue, and the user
- * has not set tolerant to an insane level, give up and die.
- */
- if (no_way_out && tolerant < 3)
- mce_panic("Machine check", &panicm, mcestart);
-
- /*
- * If the error seems to be unrecoverable, something should be
- * done. Try to kill as little as possible. If we can kill just
- * one task, do that. If the user has set the tolerance very
- * high, don't try to do anything at all.
- */
- if (kill_it && tolerant < 3) {
- int user_space = 0;
-
- /*
- * If the EIPV bit is set, it means the saved IP is the
- * instruction which caused the MCE.
- */
- if (m.mcgstatus & MCG_STATUS_EIPV)
- user_space = panicm.ip && (panicm.cs & 3);
-
- /*
- * If we know that the error was in user space, send a
- * SIGBUS. Otherwise, panic if tolerance is low.
- *
- * force_sig() takes an awful lot of locks and has a slight
- * risk of deadlocking.
- */
- if (user_space) {
- force_sig(SIGBUS, current);
- } else if (panic_on_oops || tolerant < 2) {
- mce_panic("Uncorrected machine check",
- &panicm, mcestart);
- }
- }
-
- /* notify userspace ASAP */
- set_thread_flag(TIF_MCE_NOTIFY);
-
- /* the last thing we do is clear state */
- for (i = 0; i < banks; i++) {
- if (test_bit(i, toclear))
- wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
- }
- wrmsrl(MSR_IA32_MCG_STATUS, 0);
- out2:
- atomic_dec(&mce_entry);
-}
-EXPORT_SYMBOL_GPL(do_machine_check);
-
-#ifdef CONFIG_X86_MCE_INTEL
-/***
- * mce_log_therm_throt_event - Logs the thermal throttling event to mcelog
- * @cpu: The CPU on which the event occurred.
- * @status: Event status information
- *
- * This function should be called by the thermal interrupt after the
- * event has been processed and the decision was made to log the event
- * further.
- *
- * The status parameter will be saved to the 'status' field of 'struct mce'
- * and historically has been the register value of the
- * MSR_IA32_THERMAL_STATUS (Intel) msr.
- */
-void mce_log_therm_throt_event(__u64 status)
-{
- struct mce m;
-
- mce_setup(&m);
- m.bank = MCE_THERMAL_BANK;
- m.status = status;
- mce_log(&m);
-}
-#endif /* CONFIG_X86_MCE_INTEL */
-
-/*
- * Periodic polling timer for "silent" machine check errors. If the
- * poller finds an MCE, poll 2x faster. When the poller finds no more
- * errors, poll 2x slower (up to check_interval seconds).
- */
-
-static int check_interval = 5 * 60; /* 5 minutes */
-static DEFINE_PER_CPU(int, next_interval); /* in jiffies */
-static void mcheck_timer(unsigned long);
-static DEFINE_PER_CPU(struct timer_list, mce_timer);
-
-static void mcheck_timer(unsigned long data)
-{
- struct timer_list *t = &per_cpu(mce_timer, data);
- int *n;
-
- WARN_ON(smp_processor_id() != data);
-
- if (mce_available(&current_cpu_data))
- machine_check_poll(MCP_TIMESTAMP,
- &__get_cpu_var(mce_poll_banks));
-
- /*
- * Alert userspace if needed. If we logged an MCE, reduce the
- * polling interval, otherwise increase the polling interval.
- */
- n = &__get_cpu_var(next_interval);
- if (mce_notify_user()) {
- *n = max(*n/2, HZ/100);
- } else {
- *n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ));
- }
-
- t->expires = jiffies + *n;
- add_timer(t);
-}
-
-static void mce_do_trigger(struct work_struct *work)
-{
- call_usermodehelper(trigger, trigger_argv, NULL, UMH_NO_WAIT);
-}
-
-static DECLARE_WORK(mce_trigger_work, mce_do_trigger);
-
-/*
- * Notify the user(s) about new machine check events.
- * Can be called from interrupt context, but not from machine check/NMI
- * context.
- */
-int mce_notify_user(void)
-{
- /* Not more than two messages every minute */
- static DEFINE_RATELIMIT_STATE(ratelimit, 60*HZ, 2);
-
- clear_thread_flag(TIF_MCE_NOTIFY);
- if (test_and_clear_bit(0, &notify_user)) {
- wake_up_interruptible(&mce_wait);
-
- /*
- * There is no risk of missing notifications because
- * work_pending is always cleared before the function is
- * executed.
- */
- if (trigger[0] && !work_pending(&mce_trigger_work))
- schedule_work(&mce_trigger_work);
-
- if (__ratelimit(&ratelimit))
- printk(KERN_INFO "Machine check events logged\n");
-
- return 1;
- }
- return 0;
-}
-
-/* see if the idle task needs to notify userspace */
-static int
-mce_idle_callback(struct notifier_block *nfb, unsigned long action, void *junk)
-{
- /* IDLE_END should be safe - interrupts are back on */
- if (action == IDLE_END && test_thread_flag(TIF_MCE_NOTIFY))
- mce_notify_user();
-
- return NOTIFY_OK;
-}
-
-static struct notifier_block mce_idle_notifier = {
- .notifier_call = mce_idle_callback,
-};
-
-static __init int periodic_mcheck_init(void)
-{
- idle_notifier_register(&mce_idle_notifier);
- return 0;
-}
-__initcall(periodic_mcheck_init);
-
-/*
- * Initialize Machine Checks for a CPU.
- */
-static int mce_cap_init(void)
-{
- u64 cap;
- unsigned b;
-
- rdmsrl(MSR_IA32_MCG_CAP, cap);
- b = cap & 0xff;
- if (b > MAX_NR_BANKS) {
- printk(KERN_WARNING
- "MCE: Using only %u machine check banks out of %u\n",
- MAX_NR_BANKS, b);
- b = MAX_NR_BANKS;
- }
-
- /* Don't support asymmetric configurations today */
- WARN_ON(banks != 0 && b != banks);
- banks = b;
- if (!bank) {
- bank = kmalloc(banks * sizeof(u64), GFP_KERNEL);
- if (!bank)
- return -ENOMEM;
- memset(bank, 0xff, banks * sizeof(u64));
- }
-
- /* Use accurate RIP reporting if available. */
- if ((cap & (1<<9)) && ((cap >> 16) & 0xff) >= 9)
- rip_msr = MSR_IA32_MCG_EIP;
-
- return 0;
-}
-
-static void mce_init(void *dummy)
-{
- u64 cap;
- int i;
- mce_banks_t all_banks;
-
- /*
- * Log the machine checks left over from the previous reset.
- */
- bitmap_fill(all_banks, MAX_NR_BANKS);
- machine_check_poll(MCP_UC|(!mce_bootlog ? MCP_DONTLOG : 0), &all_banks);
-
- set_in_cr4(X86_CR4_MCE);
-
- rdmsrl(MSR_IA32_MCG_CAP, cap);
- if (cap & MCG_CTL_P)
- wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
-
- for (i = 0; i < banks; i++) {
- wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]);
- wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
- }
-}
-
-/* Add per CPU specific workarounds here */
-static void mce_cpu_quirks(struct cpuinfo_x86 *c)
-{
- /* This should be disabled by the BIOS, but isn't always */
- if (c->x86_vendor == X86_VENDOR_AMD) {
- if (c->x86 == 15 && banks > 4)
- /* disable GART TBL walk error reporting, which trips off
- incorrectly with the IOMMU & 3ware & Cerberus. */
- clear_bit(10, (unsigned long *)&bank[4]);
- if(c->x86 <= 17 && mce_bootlog < 0)
- /* Lots of broken BIOS around that don't clear them
- by default and leave crap in there. Don't log. */
- mce_bootlog = 0;
- }
-
-}
-
-static void mce_cpu_features(struct cpuinfo_x86 *c)
-{
- switch (c->x86_vendor) {
- case X86_VENDOR_INTEL:
- mce_intel_feature_init(c);
- break;
- case X86_VENDOR_AMD:
- mce_amd_feature_init(c);
- break;
- default:
- break;
- }
-}
-
-static void mce_init_timer(void)
-{
- struct timer_list *t = &__get_cpu_var(mce_timer);
- int *n = &__get_cpu_var(next_interval);
-
- *n = check_interval * HZ;
- if (!*n)
- return;
- setup_timer(t, mcheck_timer, smp_processor_id());
- t->expires = round_jiffies(jiffies + *n);
- add_timer(t);
-}
-
-/*
- * Called for each booted CPU to set up machine checks.
- * Must be called with preempt off.
- */
-void __cpuinit mcheck_init(struct cpuinfo_x86 *c)
-{
- if (!mce_available(c))
- return;
-
- if (mce_cap_init() < 0) {
- mce_dont_init = 1;
- return;
- }
- mce_cpu_quirks(c);
-
- mce_init(NULL);
- mce_cpu_features(c);
- mce_init_timer();
-}
-
-/*
- * Character device to read and clear the MCE log.
- */
-
-static DEFINE_SPINLOCK(mce_state_lock);
-static int open_count; /* #times opened */
-static int open_exclu; /* already open exclusive? */
-
-static int mce_open(struct inode *inode, struct file *file)
-{
- lock_kernel();
- spin_lock(&mce_state_lock);
-
- if (open_exclu || (open_count && (file->f_flags & O_EXCL))) {
- spin_unlock(&mce_state_lock);
- unlock_kernel();
- return -EBUSY;
- }
-
- if (file->f_flags & O_EXCL)
- open_exclu = 1;
- open_count++;
-
- spin_unlock(&mce_state_lock);
- unlock_kernel();
-
- return nonseekable_open(inode, file);
-}
-
-static int mce_release(struct inode *inode, struct file *file)
-{
- spin_lock(&mce_state_lock);
-
- open_count--;
- open_exclu = 0;
-
- spin_unlock(&mce_state_lock);
-
- return 0;
-}
-
-static void collect_tscs(void *data)
-{
- unsigned long *cpu_tsc = (unsigned long *)data;
-
- rdtscll(cpu_tsc[smp_processor_id()]);
-}
-
-static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
- loff_t *off)
-{
- unsigned long *cpu_tsc;
- static DEFINE_MUTEX(mce_read_mutex);
- unsigned prev, next;
- char __user *buf = ubuf;
- int i, err;
-
- cpu_tsc = kmalloc(nr_cpu_ids * sizeof(long), GFP_KERNEL);
- if (!cpu_tsc)
- return -ENOMEM;
-
- mutex_lock(&mce_read_mutex);
- next = rcu_dereference(mcelog.next);
-
- /* Only supports full reads right now */
- if (*off != 0 || usize < MCE_LOG_LEN*sizeof(struct mce)) {
- mutex_unlock(&mce_read_mutex);
- kfree(cpu_tsc);
- return -EINVAL;
- }
-
- err = 0;
- prev = 0;
- do {
- for (i = prev; i < next; i++) {
- unsigned long start = jiffies;
-
- while (!mcelog.entry[i].finished) {
- if (time_after_eq(jiffies, start + 2)) {
- memset(mcelog.entry + i, 0,
- sizeof(struct mce));
- goto timeout;
- }
- cpu_relax();
- }
- smp_rmb();
- err |= copy_to_user(buf, mcelog.entry + i,
- sizeof(struct mce));
- buf += sizeof(struct mce);
-timeout:
- ;
- }
-
- memset(mcelog.entry + prev, 0,
- (next - prev) * sizeof(struct mce));
- prev = next;
- next = cmpxchg(&mcelog.next, prev, 0);
- } while (next != prev);
-
- synchronize_sched();
-
- /*
- * Collect entries that were still getting written before the
- * synchronize.
- */
- on_each_cpu(collect_tscs, cpu_tsc, 1);
- for (i = next; i < MCE_LOG_LEN; i++) {
- if (mcelog.entry[i].finished &&
- mcelog.entry[i].tsc < cpu_tsc[mcelog.entry[i].cpu]) {
- err |= copy_to_user(buf, mcelog.entry+i,
- sizeof(struct mce));
- smp_rmb();
- buf += sizeof(struct mce);
- memset(&mcelog.entry[i], 0, sizeof(struct mce));
- }
- }
- mutex_unlock(&mce_read_mutex);
- kfree(cpu_tsc);
- return err ? -EFAULT : buf - ubuf;
-}
-
-static unsigned int mce_poll(struct file *file, poll_table *wait)
-{
- poll_wait(file, &mce_wait, wait);
- if (rcu_dereference(mcelog.next))
- return POLLIN | POLLRDNORM;
- return 0;
-}
-
-static long mce_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
-{
- int __user *p = (int __user *)arg;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
- switch (cmd) {
- case MCE_GET_RECORD_LEN:
- return put_user(sizeof(struct mce), p);
- case MCE_GET_LOG_LEN:
- return put_user(MCE_LOG_LEN, p);
- case MCE_GETCLEAR_FLAGS: {
- unsigned flags;
-
- do {
- flags = mcelog.flags;
- } while (cmpxchg(&mcelog.flags, flags, 0) != flags);
- return put_user(flags, p);
- }
- default:
- return -ENOTTY;
- }
-}
-
-static const struct file_operations mce_chrdev_ops = {
- .open = mce_open,
- .release = mce_release,
- .read = mce_read,
- .poll = mce_poll,
- .unlocked_ioctl = mce_ioctl,
-};
-
-static struct miscdevice mce_log_device = {
- MISC_MCELOG_MINOR,
- "mcelog",
- &mce_chrdev_ops,
-};
-
-/*
- * Old style boot options parsing. Only for compatibility.
- */
-static int __init mcheck_disable(char *str)
-{
- mce_dont_init = 1;
- return 1;
-}
-
-/* mce=off disables machine check.
- mce=TOLERANCELEVEL (number, see above)
- mce=bootlog Log MCEs from before booting. Disabled by default on AMD.
- mce=nobootlog Don't log MCEs from before booting. */
-static int __init mcheck_enable(char *str)
-{
- if (!strcmp(str, "off"))
- mce_dont_init = 1;
- else if (!strcmp(str, "bootlog") || !strcmp(str,"nobootlog"))
- mce_bootlog = str[0] == 'b';
- else if (isdigit(str[0]))
- get_option(&str, &tolerant);
- else
- printk("mce= argument %s ignored. Please use /sys", str);
- return 1;
-}
-
-__setup("nomce", mcheck_disable);
-__setup("mce=", mcheck_enable);
-
-/*
- * Sysfs support
- */
-
-/*
- * Disable machine checks on suspend and shutdown. We can't really handle
- * them later.
- */
-static int mce_disable(void)
-{
- int i;
-
- for (i = 0; i < banks; i++)
- wrmsrl(MSR_IA32_MC0_CTL + i*4, 0);
- return 0;
-}
-
-static int mce_suspend(struct sys_device *dev, pm_message_t state)
-{
- return mce_disable();
-}
-
-static int mce_shutdown(struct sys_device *dev)
-{
- return mce_disable();
-}
-
-/* On resume clear all MCE state. Don't want to see leftovers from the BIOS.
- Only one CPU is active at this time, the others get readded later using
- CPU hotplug. */
-static int mce_resume(struct sys_device *dev)
-{
- mce_init(NULL);
- mce_cpu_features(&current_cpu_data);
- return 0;
-}
-
-static void mce_cpu_restart(void *data)
-{
- del_timer_sync(&__get_cpu_var(mce_timer));
- if (mce_available(&current_cpu_data))
- mce_init(NULL);
- mce_init_timer();
-}
-
-/* Reinit MCEs after user configuration changes */
-static void mce_restart(void)
-{
- on_each_cpu(mce_cpu_restart, NULL, 1);
-}
-
-static struct sysdev_class mce_sysclass = {
- .suspend = mce_suspend,
- .shutdown = mce_shutdown,
- .resume = mce_resume,
- .name = "machinecheck",
-};
-
-DEFINE_PER_CPU(struct sys_device, device_mce);
-void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu) __cpuinitdata;
-
-/* Why are there no generic functions for this? */
-#define ACCESSOR(name, var, start) \
- static ssize_t show_ ## name(struct sys_device *s, \
- struct sysdev_attribute *attr, \
- char *buf) { \
- return sprintf(buf, "%lx\n", (unsigned long)var); \
- } \
- static ssize_t set_ ## name(struct sys_device *s, \
- struct sysdev_attribute *attr, \
- const char *buf, size_t siz) { \
- char *end; \
- unsigned long new = simple_strtoul(buf, &end, 0); \
- if (end == buf) return -EINVAL; \
- var = new; \
- start; \
- return end-buf; \
- } \
- static SYSDEV_ATTR(name, 0644, show_ ## name, set_ ## name);
-
-static struct sysdev_attribute *bank_attrs;
-
-static ssize_t show_bank(struct sys_device *s, struct sysdev_attribute *attr,
- char *buf)
-{
- u64 b = bank[attr - bank_attrs];
- return sprintf(buf, "%llx\n", b);
-}
-
-static ssize_t set_bank(struct sys_device *s, struct sysdev_attribute *attr,
- const char *buf, size_t siz)
-{
- char *end;
- u64 new = simple_strtoull(buf, &end, 0);
- if (end == buf)
- return -EINVAL;
- bank[attr - bank_attrs] = new;
- mce_restart();
- return end-buf;
-}
-
-static ssize_t show_trigger(struct sys_device *s, struct sysdev_attribute *attr,
- char *buf)
-{
- strcpy(buf, trigger);
- strcat(buf, "\n");
- return strlen(trigger) + 1;
-}
-
-static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
- const char *buf,size_t siz)
-{
- char *p;
- int len;
- strncpy(trigger, buf, sizeof(trigger));
- trigger[sizeof(trigger)-1] = 0;
- len = strlen(trigger);
- p = strchr(trigger, '\n');
- if (*p) *p = 0;
- return len;
-}
-
-static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger);
-static SYSDEV_INT_ATTR(tolerant, 0644, tolerant);
-ACCESSOR(check_interval,check_interval,mce_restart())
-static struct sysdev_attribute *mce_attributes[] = {
- &attr_tolerant.attr, &attr_check_interval, &attr_trigger,
- NULL
-};
-
-static cpumask_var_t mce_device_initialized;
-
-/* Per cpu sysdev init. All of the cpus still share the same ctl bank */
-static __cpuinit int mce_create_device(unsigned int cpu)
-{
- int err;
- int i;
-
- if (!mce_available(&boot_cpu_data))
- return -EIO;
-
- memset(&per_cpu(device_mce, cpu).kobj, 0, sizeof(struct kobject));
- per_cpu(device_mce,cpu).id = cpu;
- per_cpu(device_mce,cpu).cls = &mce_sysclass;
-
- err = sysdev_register(&per_cpu(device_mce,cpu));
- if (err)
- return err;
-
- for (i = 0; mce_attributes[i]; i++) {
- err = sysdev_create_file(&per_cpu(device_mce,cpu),
- mce_attributes[i]);
- if (err)
- goto error;
- }
- for (i = 0; i < banks; i++) {
- err = sysdev_create_file(&per_cpu(device_mce, cpu),
- &bank_attrs[i]);
- if (err)
- goto error2;
- }
- cpumask_set_cpu(cpu, mce_device_initialized);
-
- return 0;
-error2:
- while (--i >= 0) {
- sysdev_remove_file(&per_cpu(device_mce, cpu),
- &bank_attrs[i]);
- }
-error:
- while (--i >= 0) {
- sysdev_remove_file(&per_cpu(device_mce,cpu),
- mce_attributes[i]);
- }
- sysdev_unregister(&per_cpu(device_mce,cpu));
-
- return err;
-}
-
-static __cpuinit void mce_remove_device(unsigned int cpu)
-{
- int i;
-
- if (!cpumask_test_cpu(cpu, mce_device_initialized))
- return;
-
- for (i = 0; mce_attributes[i]; i++)
- sysdev_remove_file(&per_cpu(device_mce,cpu),
- mce_attributes[i]);
- for (i = 0; i < banks; i++)
- sysdev_remove_file(&per_cpu(device_mce, cpu),
- &bank_attrs[i]);
- sysdev_unregister(&per_cpu(device_mce,cpu));
- cpumask_clear_cpu(cpu, mce_device_initialized);
-}
-
-/* Make sure there are no machine checks on offlined CPUs. */
-static void mce_disable_cpu(void *h)
-{
- int i;
- unsigned long action = *(unsigned long *)h;
-
- if (!mce_available(&current_cpu_data))
- return;
- if (!(action & CPU_TASKS_FROZEN))
- cmci_clear();
- for (i = 0; i < banks; i++)
- wrmsrl(MSR_IA32_MC0_CTL + i*4, 0);
-}
-
-static void mce_reenable_cpu(void *h)
-{
- int i;
- unsigned long action = *(unsigned long *)h;
-
- if (!mce_available(&current_cpu_data))
- return;
- if (!(action & CPU_TASKS_FROZEN))
- cmci_reenable();
- for (i = 0; i < banks; i++)
- wrmsrl(MSR_IA32_MC0_CTL + i*4, bank[i]);
-}
-
-/* Get notified when a cpu comes on/off. Be hotplug friendly. */
-static int __cpuinit mce_cpu_callback(struct notifier_block *nfb,
- unsigned long action, void *hcpu)
-{
- unsigned int cpu = (unsigned long)hcpu;
- struct timer_list *t = &per_cpu(mce_timer, cpu);
-
- switch (action) {
- case CPU_ONLINE:
- case CPU_ONLINE_FROZEN:
- mce_create_device(cpu);
- if (threshold_cpu_callback)
- threshold_cpu_callback(action, cpu);
- break;
- case CPU_DEAD:
- case CPU_DEAD_FROZEN:
- if (threshold_cpu_callback)
- threshold_cpu_callback(action, cpu);
- mce_remove_device(cpu);
- break;
- case CPU_DOWN_PREPARE:
- case CPU_DOWN_PREPARE_FROZEN:
- del_timer_sync(t);
- smp_call_function_single(cpu, mce_disable_cpu, &action, 1);
- break;
- case CPU_DOWN_FAILED:
- case CPU_DOWN_FAILED_FROZEN:
- t->expires = round_jiffies(jiffies +
- __get_cpu_var(next_interval));
- add_timer_on(t, cpu);
- smp_call_function_single(cpu, mce_reenable_cpu, &action, 1);
- break;
- case CPU_POST_DEAD:
- /* intentionally ignoring frozen here */
- cmci_rediscover(cpu);
- break;
- }
- return NOTIFY_OK;
-}
-
-static struct notifier_block mce_cpu_notifier __cpuinitdata = {
- .notifier_call = mce_cpu_callback,
-};
-
-static __init int mce_init_banks(void)
-{
- int i;
-
- bank_attrs = kzalloc(sizeof(struct sysdev_attribute) * banks,
- GFP_KERNEL);
- if (!bank_attrs)
- return -ENOMEM;
-
- for (i = 0; i < banks; i++) {
- struct sysdev_attribute *a = &bank_attrs[i];
- a->attr.name = kasprintf(GFP_KERNEL, "bank%d", i);
- if (!a->attr.name)
- goto nomem;
- a->attr.mode = 0644;
- a->show = show_bank;
- a->store = set_bank;
- }
- return 0;
-
-nomem:
- while (--i >= 0)
- kfree(bank_attrs[i].attr.name);
- kfree(bank_attrs);
- bank_attrs = NULL;
- return -ENOMEM;
-}
-
-static __init int mce_init_device(void)
-{
- int err;
- int i = 0;
-
- if (!mce_available(&boot_cpu_data))
- return -EIO;
-
- zalloc_cpumask_var(&mce_device_initialized, GFP_KERNEL);
-
- err = mce_init_banks();
- if (err)
- return err;
-
- err = sysdev_class_register(&mce_sysclass);
- if (err)
- return err;
-
- for_each_online_cpu(i) {
- err = mce_create_device(i);
- if (err)
- return err;
- }
-
- register_hotcpu_notifier(&mce_cpu_notifier);
- misc_register(&mce_log_device);
- return err;
-}
-
-device_initcall(mce_init_device);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
index 56dde9c4bc96..ddae21620bda 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
@@ -13,22 +13,22 @@
*
* All MC4_MISCi registers are shared between multi-cores
*/
-
-#include <linux/cpu.h>
-#include <linux/errno.h>
-#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/kobject.h>
#include <linux/notifier.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
+#include <linux/kobject.h>
+#include <linux/percpu.h>
#include <linux/sysdev.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
#include <linux/sysfs.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+
#include <asm/apic.h>
+#include <asm/idle.h>
#include <asm/mce.h>
#include <asm/msr.h>
-#include <asm/percpu.h>
-#include <asm/idle.h>
#define PFX "mce_threshold: "
#define VERSION "version 1.1.1"
@@ -48,26 +48,26 @@
#define MCG_XBLK_ADDR 0xC0000400
struct threshold_block {
- unsigned int block;
- unsigned int bank;
- unsigned int cpu;
- u32 address;
- u16 interrupt_enable;
- u16 threshold_limit;
- struct kobject kobj;
- struct list_head miscj;
+ unsigned int block;
+ unsigned int bank;
+ unsigned int cpu;
+ u32 address;
+ u16 interrupt_enable;
+ u16 threshold_limit;
+ struct kobject kobj;
+ struct list_head miscj;
};
/* defaults used early on boot */
static struct threshold_block threshold_defaults = {
- .interrupt_enable = 0,
- .threshold_limit = THRESHOLD_MAX,
+ .interrupt_enable = 0,
+ .threshold_limit = THRESHOLD_MAX,
};
struct threshold_bank {
- struct kobject *kobj;
- struct threshold_block *blocks;
- cpumask_var_t cpus;
+ struct kobject *kobj;
+ struct threshold_block *blocks;
+ cpumask_var_t cpus;
};
static DEFINE_PER_CPU(struct threshold_bank *, threshold_banks[NR_BANKS]);
@@ -86,9 +86,9 @@ static void amd_threshold_interrupt(void);
*/
struct thresh_restart {
- struct threshold_block *b;
- int reset;
- u16 old_limit;
+ struct threshold_block *b;
+ int reset;
+ u16 old_limit;
};
/* must be called with correct cpu affinity */
@@ -110,6 +110,7 @@ static void threshold_restart_bank(void *_tr)
} else if (tr->old_limit) { /* change limit w/o reset */
int new_count = (mci_misc_hi & THRESHOLD_MAX) +
(tr->old_limit - tr->b->threshold_limit);
+
mci_misc_hi = (mci_misc_hi & ~MASK_ERR_COUNT_HI) |
(new_count & THRESHOLD_MAX);
}
@@ -125,11 +126,11 @@ static void threshold_restart_bank(void *_tr)
/* cpu init entry point, called from mce.c with preempt off */
void mce_amd_feature_init(struct cpuinfo_x86 *c)
{
- unsigned int bank, block;
unsigned int cpu = smp_processor_id();
- u8 lvt_off;
u32 low = 0, high = 0, address = 0;
+ unsigned int bank, block;
struct thresh_restart tr;
+ u8 lvt_off;
for (bank = 0; bank < NR_BANKS; ++bank) {
for (block = 0; block < NR_BLOCKS; ++block) {
@@ -140,8 +141,7 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
if (!address)
break;
address += MCG_XBLK_ADDR;
- }
- else
+ } else
++address;
if (rdmsr_safe(address, &low, &high))
@@ -193,9 +193,9 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
*/
static void amd_threshold_interrupt(void)
{
+ u32 low = 0, high = 0, address = 0;
unsigned int bank, block;
struct mce m;
- u32 low = 0, high = 0, address = 0;
mce_setup(&m);
@@ -204,16 +204,16 @@ static void amd_threshold_interrupt(void)
if (!(per_cpu(bank_map, m.cpu) & (1 << bank)))
continue;
for (block = 0; block < NR_BLOCKS; ++block) {
- if (block == 0)
+ if (block == 0) {
address = MSR_IA32_MC0_MISC + bank * 4;
- else if (block == 1) {
+ } else if (block == 1) {
address = (low & MASK_BLKPTR_LO) >> 21;
if (!address)
break;
address += MCG_XBLK_ADDR;
- }
- else
+ } else {
++address;
+ }
if (rdmsr_safe(address, &low, &high))
break;
@@ -229,8 +229,10 @@ static void amd_threshold_interrupt(void)
(high & MASK_LOCKED_HI))
continue;
- /* Log the machine check that caused the threshold
- event. */
+ /*
+ * Log the machine check that caused the threshold
+ * event.
+ */
machine_check_poll(MCP_TIMESTAMP,
&__get_cpu_var(mce_poll_banks));
@@ -254,48 +256,52 @@ static void amd_threshold_interrupt(void)
struct threshold_attr {
struct attribute attr;
- ssize_t(*show) (struct threshold_block *, char *);
- ssize_t(*store) (struct threshold_block *, const char *, size_t count);
+ ssize_t (*show) (struct threshold_block *, char *);
+ ssize_t (*store) (struct threshold_block *, const char *, size_t count);
};
-#define SHOW_FIELDS(name) \
-static ssize_t show_ ## name(struct threshold_block * b, char *buf) \
-{ \
- return sprintf(buf, "%lx\n", (unsigned long) b->name); \
+#define SHOW_FIELDS(name) \
+static ssize_t show_ ## name(struct threshold_block *b, char *buf) \
+{ \
+ return sprintf(buf, "%lx\n", (unsigned long) b->name); \
}
SHOW_FIELDS(interrupt_enable)
SHOW_FIELDS(threshold_limit)
-static ssize_t store_interrupt_enable(struct threshold_block *b,
- const char *buf, size_t count)
+static ssize_t
+store_interrupt_enable(struct threshold_block *b, const char *buf, size_t size)
{
- char *end;
struct thresh_restart tr;
- unsigned long new = simple_strtoul(buf, &end, 0);
- if (end == buf)
+ unsigned long new;
+
+ if (strict_strtoul(buf, 0, &new) < 0)
return -EINVAL;
+
b->interrupt_enable = !!new;
- tr.b = b;
- tr.reset = 0;
- tr.old_limit = 0;
+ tr.b = b;
+ tr.reset = 0;
+ tr.old_limit = 0;
+
smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1);
- return end - buf;
+ return size;
}
-static ssize_t store_threshold_limit(struct threshold_block *b,
- const char *buf, size_t count)
+static ssize_t
+store_threshold_limit(struct threshold_block *b, const char *buf, size_t size)
{
- char *end;
struct thresh_restart tr;
- unsigned long new = simple_strtoul(buf, &end, 0);
- if (end == buf)
+ unsigned long new;
+
+ if (strict_strtoul(buf, 0, &new) < 0)
return -EINVAL;
+
if (new > THRESHOLD_MAX)
new = THRESHOLD_MAX;
if (new < 1)
new = 1;
+
tr.old_limit = b->threshold_limit;
b->threshold_limit = new;
tr.b = b;
@@ -303,12 +309,12 @@ static ssize_t store_threshold_limit(struct threshold_block *b,
smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1);
- return end - buf;
+ return size;
}
struct threshold_block_cross_cpu {
- struct threshold_block *tb;
- long retval;
+ struct threshold_block *tb;
+ long retval;
};
static void local_error_count_handler(void *_tbcc)
@@ -338,16 +344,13 @@ static ssize_t store_error_count(struct threshold_block *b,
return 1;
}
-#define THRESHOLD_ATTR(_name,_mode,_show,_store) { \
- .attr = {.name = __stringify(_name), .mode = _mode }, \
- .show = _show, \
- .store = _store, \
+#define RW_ATTR(val) \
+static struct threshold_attr val = { \
+ .attr = {.name = __stringify(val), .mode = 0644 }, \
+ .show = show_## val, \
+ .store = store_## val, \
};
-#define RW_ATTR(name) \
-static struct threshold_attr name = \
- THRESHOLD_ATTR(name, 0644, show_## name, store_## name)
-
RW_ATTR(interrupt_enable);
RW_ATTR(threshold_limit);
RW_ATTR(error_count);
@@ -359,15 +362,17 @@ static struct attribute *default_attrs[] = {
NULL
};
-#define to_block(k) container_of(k, struct threshold_block, kobj)
-#define to_attr(a) container_of(a, struct threshold_attr, attr)
+#define to_block(k) container_of(k, struct threshold_block, kobj)
+#define to_attr(a) container_of(a, struct threshold_attr, attr)
static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf)
{
struct threshold_block *b = to_block(kobj);
struct threshold_attr *a = to_attr(attr);
ssize_t ret;
+
ret = a->show ? a->show(b, buf) : -EIO;
+
return ret;
}
@@ -377,18 +382,20 @@ static ssize_t store(struct kobject *kobj, struct attribute *attr,
struct threshold_block *b = to_block(kobj);
struct threshold_attr *a = to_attr(attr);
ssize_t ret;
+
ret = a->store ? a->store(b, buf, count) : -EIO;
+
return ret;
}
static struct sysfs_ops threshold_ops = {
- .show = show,
- .store = store,
+ .show = show,
+ .store = store,
};
static struct kobj_type threshold_ktype = {
- .sysfs_ops = &threshold_ops,
- .default_attrs = default_attrs,
+ .sysfs_ops = &threshold_ops,
+ .default_attrs = default_attrs,
};
static __cpuinit int allocate_threshold_blocks(unsigned int cpu,
@@ -396,9 +403,9 @@ static __cpuinit int allocate_threshold_blocks(unsigned int cpu,
unsigned int block,
u32 address)
{
- int err;
- u32 low, high;
struct threshold_block *b = NULL;
+ u32 low, high;
+ int err;
if ((bank >= NR_BANKS) || (block >= NR_BLOCKS))
return 0;
@@ -421,20 +428,21 @@ static __cpuinit int allocate_threshold_blocks(unsigned int cpu,
if (!b)
return -ENOMEM;
- b->block = block;
- b->bank = bank;
- b->cpu = cpu;
- b->address = address;
- b->interrupt_enable = 0;
- b->threshold_limit = THRESHOLD_MAX;
+ b->block = block;
+ b->bank = bank;
+ b->cpu = cpu;
+ b->address = address;
+ b->interrupt_enable = 0;
+ b->threshold_limit = THRESHOLD_MAX;
INIT_LIST_HEAD(&b->miscj);
- if (per_cpu(threshold_banks, cpu)[bank]->blocks)
+ if (per_cpu(threshold_banks, cpu)[bank]->blocks) {
list_add(&b->miscj,
&per_cpu(threshold_banks, cpu)[bank]->blocks->miscj);
- else
+ } else {
per_cpu(threshold_banks, cpu)[bank]->blocks = b;
+ }
err = kobject_init_and_add(&b->kobj, &threshold_ktype,
per_cpu(threshold_banks, cpu)[bank]->kobj,
@@ -447,8 +455,9 @@ recurse:
if (!address)
return 0;
address += MCG_XBLK_ADDR;
- } else
+ } else {
++address;
+ }
err = allocate_threshold_blocks(cpu, bank, ++block, address);
if (err)
@@ -500,13 +509,14 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
if (!b)
goto out;
- err = sysfs_create_link(&per_cpu(device_mce, cpu).kobj,
+ err = sysfs_create_link(&per_cpu(mce_dev, cpu).kobj,
b->kobj, name);
if (err)
goto out;
cpumask_copy(b->cpus, cpu_core_mask(cpu));
per_cpu(threshold_banks, cpu)[bank] = b;
+
goto out;
}
#endif
@@ -522,7 +532,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
goto out;
}
- b->kobj = kobject_create_and_add(name, &per_cpu(device_mce, cpu).kobj);
+ b->kobj = kobject_create_and_add(name, &per_cpu(mce_dev, cpu).kobj);
if (!b->kobj)
goto out_free;
@@ -542,7 +552,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
if (i == cpu)
continue;
- err = sysfs_create_link(&per_cpu(device_mce, i).kobj,
+ err = sysfs_create_link(&per_cpu(mce_dev, i).kobj,
b->kobj, name);
if (err)
goto out;
@@ -605,15 +615,13 @@ static void deallocate_threshold_block(unsigned int cpu,
static void threshold_remove_bank(unsigned int cpu, int bank)
{
- int i = 0;
struct threshold_bank *b;
char name[32];
+ int i = 0;
b = per_cpu(threshold_banks, cpu)[bank];
-
if (!b)
return;
-
if (!b->blocks)
goto free_out;
@@ -622,8 +630,9 @@ static void threshold_remove_bank(unsigned int cpu, int bank)
#ifdef CONFIG_SMP
/* sibling symlink */
if (shared_bank[bank] && b->blocks->cpu != cpu) {
- sysfs_remove_link(&per_cpu(device_mce, cpu).kobj, name);
+ sysfs_remove_link(&per_cpu(mce_dev, cpu).kobj, name);
per_cpu(threshold_banks, cpu)[bank] = NULL;
+
return;
}
#endif
@@ -633,7 +642,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank)
if (i == cpu)
continue;
- sysfs_remove_link(&per_cpu(device_mce, i).kobj, name);
+ sysfs_remove_link(&per_cpu(mce_dev, i).kobj, name);
per_cpu(threshold_banks, i)[bank] = NULL;
}
@@ -659,12 +668,9 @@ static void threshold_remove_device(unsigned int cpu)
}
/* get notified when a cpu comes on/off */
-static void __cpuinit amd_64_threshold_cpu_callback(unsigned long action,
- unsigned int cpu)
+static void __cpuinit
+amd_64_threshold_cpu_callback(unsigned long action, unsigned int cpu)
{
- if (cpu >= NR_CPUS)
- return;
-
switch (action) {
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
@@ -686,11 +692,12 @@ static __init int threshold_init_device(void)
/* to hit CPUs online before the notifier is up */
for_each_online_cpu(lcpu) {
int err = threshold_create_device(lcpu);
+
if (err)
return err;
}
threshold_cpu_callback = amd_64_threshold_cpu_callback;
+
return 0;
}
-
device_initcall(threshold_init_device);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
new file mode 100644
index 000000000000..2b011d2d8579
--- /dev/null
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -0,0 +1,74 @@
+/*
+ * Common code for Intel machine checks
+ */
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/therm_throt.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/apic.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+void intel_init_thermal(struct cpuinfo_x86 *c)
+{
+ unsigned int cpu = smp_processor_id();
+ int tm2 = 0;
+ u32 l, h;
+
+ /* Thermal monitoring depends on ACPI and clock modulation*/
+ if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC))
+ return;
+
+ /*
+ * First check if its enabled already, in which case there might
+ * be some SMM goo which handles it, so we can't even put a handler
+ * since it might be delivered via SMI already:
+ */
+ rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+ h = apic_read(APIC_LVTTHMR);
+ if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
+ printk(KERN_DEBUG
+ "CPU%d: Thermal monitoring handled by SMI\n", cpu);
+ return;
+ }
+
+ if (cpu_has(c, X86_FEATURE_TM2) && (l & MSR_IA32_MISC_ENABLE_TM2))
+ tm2 = 1;
+
+ /* Check whether a vector already exists */
+ if (h & APIC_VECTOR_MASK) {
+ printk(KERN_DEBUG
+ "CPU%d: Thermal LVT vector (%#x) already installed\n",
+ cpu, (h & APIC_VECTOR_MASK));
+ return;
+ }
+
+ /* We'll mask the thermal vector in the lapic till we're ready: */
+ h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED;
+ apic_write(APIC_LVTTHMR, h);
+
+ rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
+ wrmsr(MSR_IA32_THERM_INTERRUPT,
+ l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h);
+
+ intel_set_thermal_handler();
+
+ rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+ wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
+
+ /* Unmask the thermal vector: */
+ l = apic_read(APIC_LVTTHMR);
+ apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+
+ printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
+ cpu, tm2 ? "TM2" : "TM1");
+
+ /* enable thermal throttle processing */
+ atomic_set(&therm_throt_en, 1);
+}
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
index 65a0fceedcd7..f2ef6952c400 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
@@ -16,6 +16,8 @@
#include <asm/idle.h>
#include <asm/therm_throt.h>
+#include "mce.h"
+
asmlinkage void smp_thermal_interrupt(void)
{
__u64 msr_val;
@@ -26,67 +28,13 @@ asmlinkage void smp_thermal_interrupt(void)
irq_enter();
rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
- if (therm_throt_process(msr_val & 1))
+ if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT))
mce_log_therm_throt_event(msr_val);
inc_irq_stat(irq_thermal_count);
irq_exit();
}
-static void intel_init_thermal(struct cpuinfo_x86 *c)
-{
- u32 l, h;
- int tm2 = 0;
- unsigned int cpu = smp_processor_id();
-
- if (!cpu_has(c, X86_FEATURE_ACPI))
- return;
-
- if (!cpu_has(c, X86_FEATURE_ACC))
- return;
-
- /* first check if TM1 is already enabled by the BIOS, in which
- * case there might be some SMM goo which handles it, so we can't even
- * put a handler since it might be delivered via SMI already.
- */
- rdmsr(MSR_IA32_MISC_ENABLE, l, h);
- h = apic_read(APIC_LVTTHMR);
- if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
- printk(KERN_DEBUG
- "CPU%d: Thermal monitoring handled by SMI\n", cpu);
- return;
- }
-
- if (cpu_has(c, X86_FEATURE_TM2) && (l & MSR_IA32_MISC_ENABLE_TM2))
- tm2 = 1;
-
- if (h & APIC_VECTOR_MASK) {
- printk(KERN_DEBUG
- "CPU%d: Thermal LVT vector (%#x) already "
- "installed\n", cpu, (h & APIC_VECTOR_MASK));
- return;
- }
-
- h = THERMAL_APIC_VECTOR;
- h |= (APIC_DM_FIXED | APIC_LVT_MASKED);
- apic_write(APIC_LVTTHMR, h);
-
- rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
- wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03, h);
-
- rdmsr(MSR_IA32_MISC_ENABLE, l, h);
- wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
-
- l = apic_read(APIC_LVTTHMR);
- apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
- printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
- cpu, tm2 ? "TM2" : "TM1");
-
- /* enable thermal throttle processing */
- atomic_set(&therm_throt_en, 1);
- return;
-}
-
/*
* Support for Intel Correct Machine Check Interrupts. This allows
* the CPU to raise an interrupt when a corrected machine check happened.
@@ -108,6 +56,9 @@ static int cmci_supported(int *banks)
{
u64 cap;
+ if (mce_cmci_disabled || mce_ignore_ce)
+ return 0;
+
/*
* Vendor check is not strictly needed, but the initial
* initialization is vendor keyed and this
@@ -131,7 +82,7 @@ static int cmci_supported(int *banks)
static void intel_threshold_interrupt(void)
{
machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned));
- mce_notify_user();
+ mce_notify_irq();
}
static void print_update(char *type, int *hdr, int num)
@@ -247,7 +198,7 @@ void cmci_rediscover(int dying)
return;
cpumask_copy(old, &current->cpus_allowed);
- for_each_online_cpu (cpu) {
+ for_each_online_cpu(cpu) {
if (cpu == dying)
continue;
if (set_cpus_allowed_ptr(current, cpumask_of(cpu)))
diff --git a/arch/x86/kernel/cpu/mcheck/non-fatal.c b/arch/x86/kernel/cpu/mcheck/non-fatal.c
index a74af128efc9..70b710420f74 100644
--- a/arch/x86/kernel/cpu/mcheck/non-fatal.c
+++ b/arch/x86/kernel/cpu/mcheck/non-fatal.c
@@ -6,15 +6,14 @@
* This file contains routines to check for non-fatal MCEs every 15s
*
*/
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/jiffies.h>
-#include <linux/workqueue.h>
#include <linux/interrupt.h>
-#include <linux/smp.h>
+#include <linux/workqueue.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/smp.h>
#include <asm/processor.h>
#include <asm/system.h>
@@ -22,9 +21,9 @@
#include "mce.h"
-static int firstbank;
+static int firstbank;
-#define MCE_RATE 15*HZ /* timer rate is 15s */
+#define MCE_RATE (15*HZ) /* timer rate is 15s */
static void mce_checkregs(void *info)
{
@@ -34,23 +33,24 @@ static void mce_checkregs(void *info)
for (i = firstbank; i < nr_mce_banks; i++) {
rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
- if (high & (1<<31)) {
- printk(KERN_INFO "MCE: The hardware reports a non "
- "fatal, correctable incident occurred on "
- "CPU %d.\n",
+ if (!(high & (1<<31)))
+ continue;
+
+ printk(KERN_INFO "MCE: The hardware reports a non fatal, "
+ "correctable incident occurred on CPU %d.\n",
smp_processor_id());
- printk(KERN_INFO "Bank %d: %08x%08x\n", i, high, low);
-
- /*
- * Scrub the error so we don't pick it up in MCE_RATE
- * seconds time.
- */
- wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
-
- /* Serialize */
- wmb();
- add_taint(TAINT_MACHINE_CHECK);
- }
+
+ printk(KERN_INFO "Bank %d: %08x%08x\n", i, high, low);
+
+ /*
+ * Scrub the error so we don't pick it up in MCE_RATE
+ * seconds time:
+ */
+ wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
+
+ /* Serialize: */
+ wmb();
+ add_taint(TAINT_MACHINE_CHECK);
}
}
@@ -77,16 +77,17 @@ static int __init init_nonfatal_mce_checker(void)
/* Some Athlons misbehave when we frob bank 0 */
if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
- boot_cpu_data.x86 == 6)
- firstbank = 1;
+ boot_cpu_data.x86 == 6)
+ firstbank = 1;
else
- firstbank = 0;
+ firstbank = 0;
/*
* Check for non-fatal errors every MCE_RATE s
*/
schedule_delayed_work(&mce_work, round_jiffies_relative(MCE_RATE));
printk(KERN_INFO "Machine check exception polling timer started.\n");
+
return 0;
}
module_init(init_nonfatal_mce_checker);
diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c
index f53bdcbaf382..82cee108a2d3 100644
--- a/arch/x86/kernel/cpu/mcheck/p4.c
+++ b/arch/x86/kernel/cpu/mcheck/p4.c
@@ -2,18 +2,17 @@
* P4 specific Machine Check Exception Reporting
*/
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
#include <linux/smp.h>
+#include <asm/therm_throt.h>
#include <asm/processor.h>
#include <asm/system.h>
-#include <asm/msr.h>
#include <asm/apic.h>
-
-#include <asm/therm_throt.h>
+#include <asm/msr.h>
#include "mce.h"
@@ -36,6 +35,7 @@ static int mce_num_extended_msrs;
#ifdef CONFIG_X86_MCE_P4THERMAL
+
static void unexpected_thermal_interrupt(struct pt_regs *regs)
{
printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n",
@@ -43,7 +43,7 @@ static void unexpected_thermal_interrupt(struct pt_regs *regs)
add_taint(TAINT_MACHINE_CHECK);
}
-/* P4/Xeon Thermal transition interrupt handler */
+/* P4/Xeon Thermal transition interrupt handler: */
static void intel_thermal_interrupt(struct pt_regs *regs)
{
__u64 msr_val;
@@ -51,11 +51,12 @@ static void intel_thermal_interrupt(struct pt_regs *regs)
ack_APIC_irq();
rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
- therm_throt_process(msr_val & 0x1);
+ therm_throt_process(msr_val & THERM_STATUS_PROCHOT);
}
-/* Thermal interrupt handler for this CPU setup */
-static void (*vendor_thermal_interrupt)(struct pt_regs *regs) = unexpected_thermal_interrupt;
+/* Thermal interrupt handler for this CPU setup: */
+static void (*vendor_thermal_interrupt)(struct pt_regs *regs) =
+ unexpected_thermal_interrupt;
void smp_thermal_interrupt(struct pt_regs *regs)
{
@@ -65,67 +66,15 @@ void smp_thermal_interrupt(struct pt_regs *regs)
irq_exit();
}
-/* P4/Xeon Thermal regulation detect and init */
-static void intel_init_thermal(struct cpuinfo_x86 *c)
+void intel_set_thermal_handler(void)
{
- u32 l, h;
- unsigned int cpu = smp_processor_id();
-
- /* Thermal monitoring */
- if (!cpu_has(c, X86_FEATURE_ACPI))
- return; /* -ENODEV */
-
- /* Clock modulation */
- if (!cpu_has(c, X86_FEATURE_ACC))
- return; /* -ENODEV */
-
- /* first check if its enabled already, in which case there might
- * be some SMM goo which handles it, so we can't even put a handler
- * since it might be delivered via SMI already -zwanem.
- */
- rdmsr(MSR_IA32_MISC_ENABLE, l, h);
- h = apic_read(APIC_LVTTHMR);
- if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
- printk(KERN_DEBUG "CPU%d: Thermal monitoring handled by SMI\n",
- cpu);
- return; /* -EBUSY */
- }
-
- /* check whether a vector already exists, temporarily masked? */
- if (h & APIC_VECTOR_MASK) {
- printk(KERN_DEBUG "CPU%d: Thermal LVT vector (%#x) already "
- "installed\n",
- cpu, (h & APIC_VECTOR_MASK));
- return; /* -EBUSY */
- }
-
- /* The temperature transition interrupt handler setup */
- h = THERMAL_APIC_VECTOR; /* our delivery vector */
- h |= (APIC_DM_FIXED | APIC_LVT_MASKED); /* we'll mask till we're ready */
- apic_write(APIC_LVTTHMR, h);
-
- rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
- wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03 , h);
-
- /* ok we're good to go... */
vendor_thermal_interrupt = intel_thermal_interrupt;
-
- rdmsr(MSR_IA32_MISC_ENABLE, l, h);
- wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
-
- l = apic_read(APIC_LVTTHMR);
- apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
- printk(KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu);
-
- /* enable thermal throttle processing */
- atomic_set(&therm_throt_en, 1);
- return;
}
-#endif /* CONFIG_X86_MCE_P4THERMAL */
+#endif /* CONFIG_X86_MCE_P4THERMAL */
/* P4/Xeon Extended MCE MSR retrieval, return 0 if unsupported */
-static inline void intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
+static void intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
{
u32 h;
@@ -143,9 +92,9 @@ static inline void intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
static void intel_machine_check(struct pt_regs *regs, long error_code)
{
- int recover = 1;
u32 alow, ahigh, high, low;
u32 mcgstl, mcgsth;
+ int recover = 1;
int i;
rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
@@ -157,7 +106,9 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
if (mce_num_extended_msrs > 0) {
struct intel_mce_extended_msrs dbg;
+
intel_get_extended_msrs(&dbg);
+
printk(KERN_DEBUG "CPU %d: EIP: %08x EFLAGS: %08x\n"
"\teax: %08x ebx: %08x ecx: %08x edx: %08x\n"
"\tesi: %08x edi: %08x ebp: %08x esp: %08x\n",
@@ -171,6 +122,7 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
if (high & (1<<31)) {
char misc[20];
char addr[24];
+
misc[0] = addr[0] = '\0';
if (high & (1<<29))
recover |= 1;
@@ -196,6 +148,7 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
panic("Unable to continue");
printk(KERN_EMERG "Attempting to continue.\n");
+
/*
* Do not clear the MSR_IA32_MCi_STATUS if the error is not
* recoverable/continuable.This will allow BIOS to look at the MSRs
@@ -217,7 +170,6 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
}
-
void intel_p4_mcheck_init(struct cpuinfo_x86 *c)
{
u32 l, h;
diff --git a/arch/x86/kernel/cpu/mcheck/p5.c b/arch/x86/kernel/cpu/mcheck/p5.c
index c9f77ea69edc..015f481ab1b0 100644
--- a/arch/x86/kernel/cpu/mcheck/p5.c
+++ b/arch/x86/kernel/cpu/mcheck/p5.c
@@ -2,11 +2,10 @@
* P5 specific Machine Check Exception Reporting
* (C) Copyright 2002 Alan Cox <alan@lxorguk.ukuu.org.uk>
*/
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
#include <linux/smp.h>
#include <asm/processor.h>
@@ -15,39 +14,58 @@
#include "mce.h"
-/* Machine check handler for Pentium class Intel */
+/* By default disabled */
+int mce_p5_enable;
+
+/* Machine check handler for Pentium class Intel CPUs: */
static void pentium_machine_check(struct pt_regs *regs, long error_code)
{
u32 loaddr, hi, lotype;
+
rdmsr(MSR_IA32_P5_MC_ADDR, loaddr, hi);
rdmsr(MSR_IA32_P5_MC_TYPE, lotype, hi);
- printk(KERN_EMERG "CPU#%d: Machine Check Exception: 0x%8X (type 0x%8X).\n", smp_processor_id(), loaddr, lotype);
- if (lotype&(1<<5))
- printk(KERN_EMERG "CPU#%d: Possible thermal failure (CPU on fire ?).\n", smp_processor_id());
+
+ printk(KERN_EMERG
+ "CPU#%d: Machine Check Exception: 0x%8X (type 0x%8X).\n",
+ smp_processor_id(), loaddr, lotype);
+
+ if (lotype & (1<<5)) {
+ printk(KERN_EMERG
+ "CPU#%d: Possible thermal failure (CPU on fire ?).\n",
+ smp_processor_id());
+ }
+
add_taint(TAINT_MACHINE_CHECK);
}
-/* Set up machine check reporting for processors with Intel style MCE */
+/* Set up machine check reporting for processors with Intel style MCE: */
void intel_p5_mcheck_init(struct cpuinfo_x86 *c)
{
u32 l, h;
- /*Check for MCE support */
+ /* Check for MCE support: */
if (!cpu_has(c, X86_FEATURE_MCE))
return;
- /* Default P5 to off as its often misconnected */
+#ifdef CONFIG_X86_OLD_MCE
+ /* Default P5 to off as its often misconnected: */
if (mce_disabled != -1)
return;
+#endif
+
machine_check_vector = pentium_machine_check;
+ /* Make sure the vector pointer is visible before we enable MCEs: */
wmb();
- /* Read registers before enabling */
+ /* Read registers before enabling: */
rdmsr(MSR_IA32_P5_MC_ADDR, l, h);
rdmsr(MSR_IA32_P5_MC_TYPE, l, h);
- printk(KERN_INFO "Intel old style machine check architecture supported.\n");
+ printk(KERN_INFO
+ "Intel old style machine check architecture supported.\n");
- /* Enable MCE */
+ /* Enable MCE: */
set_in_cr4(X86_CR4_MCE);
- printk(KERN_INFO "Intel old style machine check reporting enabled on CPU#%d.\n", smp_processor_id());
+ printk(KERN_INFO
+ "Intel old style machine check reporting enabled on CPU#%d.\n",
+ smp_processor_id());
}
diff --git a/arch/x86/kernel/cpu/mcheck/p6.c b/arch/x86/kernel/cpu/mcheck/p6.c
index 2ac52d7b434b..43c24e667457 100644
--- a/arch/x86/kernel/cpu/mcheck/p6.c
+++ b/arch/x86/kernel/cpu/mcheck/p6.c
@@ -2,11 +2,10 @@
* P6 specific Machine Check Exception Reporting
* (C) Copyright 2002 Alan Cox <alan@lxorguk.ukuu.org.uk>
*/
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
#include <linux/smp.h>
#include <asm/processor.h>
@@ -18,9 +17,9 @@
/* Machine Check Handler For PII/PIII */
static void intel_machine_check(struct pt_regs *regs, long error_code)
{
- int recover = 1;
u32 alow, ahigh, high, low;
u32 mcgstl, mcgsth;
+ int recover = 1;
int i;
rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
@@ -35,12 +34,16 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
if (high & (1<<31)) {
char misc[20];
char addr[24];
- misc[0] = addr[0] = '\0';
+
+ misc[0] = '\0';
+ addr[0] = '\0';
+
if (high & (1<<29))
recover |= 1;
if (high & (1<<25))
recover |= 2;
high &= ~(1<<31);
+
if (high & (1<<27)) {
rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh);
snprintf(misc, 20, "[%08x%08x]", ahigh, alow);
@@ -49,6 +52,7 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
snprintf(addr, 24, " at %08x%08x", ahigh, alow);
}
+
printk(KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",
smp_processor_id(), i, high, low, misc, addr);
}
@@ -63,16 +67,17 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
/*
* Do not clear the MSR_IA32_MCi_STATUS if the error is not
* recoverable/continuable.This will allow BIOS to look at the MSRs
- * for errors if the OS could not log the error.
+ * for errors if the OS could not log the error:
*/
for (i = 0; i < nr_mce_banks; i++) {
unsigned int msr;
+
msr = MSR_IA32_MC0_STATUS+i*4;
rdmsr(msr, low, high);
if (high & (1<<31)) {
- /* Clear it */
+ /* Clear it: */
wrmsr(msr, 0UL, 0UL);
- /* Serialize */
+ /* Serialize: */
wmb();
add_taint(TAINT_MACHINE_CHECK);
}
@@ -81,7 +86,7 @@ static void intel_machine_check(struct pt_regs *regs, long error_code)
wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
}
-/* Set up machine check reporting for processors with Intel style MCE */
+/* Set up machine check reporting for processors with Intel style MCE: */
void intel_p6_mcheck_init(struct cpuinfo_x86 *c)
{
u32 l, h;
@@ -97,6 +102,7 @@ void intel_p6_mcheck_init(struct cpuinfo_x86 *c)
/* Ok machine check is available */
machine_check_vector = intel_machine_check;
+ /* Make sure the vector pointer is visible before we enable MCEs: */
wmb();
printk(KERN_INFO "Intel machine check architecture supported.\n");
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index d5ae2243f0b9..7b1ae2e20ba5 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -1,7 +1,7 @@
/*
- *
* Thermal throttle event support code (such as syslog messaging and rate
* limiting) that was factored out from x86_64 (mce_intel.c) and i386 (p4.c).
+ *
* This allows consistent reporting of CPU thermal throttle events.
*
* Maintains a counter in /sys that keeps track of the number of thermal
@@ -13,43 +13,43 @@
* Credits: Adapted from Zwane Mwaikambo's original code in mce_intel.c.
* Inspired by Ross Biro's and Al Borchers' counter code.
*/
-
+#include <linux/notifier.h>
+#include <linux/jiffies.h>
#include <linux/percpu.h>
#include <linux/sysdev.h>
#include <linux/cpu.h>
-#include <asm/cpu.h>
-#include <linux/notifier.h>
-#include <linux/jiffies.h>
+
#include <asm/therm_throt.h>
/* How long to wait between reporting thermal events */
-#define CHECK_INTERVAL (300 * HZ)
+#define CHECK_INTERVAL (300 * HZ)
static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES;
static DEFINE_PER_CPU(unsigned long, thermal_throttle_count);
-atomic_t therm_throt_en = ATOMIC_INIT(0);
+
+atomic_t therm_throt_en = ATOMIC_INIT(0);
#ifdef CONFIG_SYSFS
-#define define_therm_throt_sysdev_one_ro(_name) \
- static SYSDEV_ATTR(_name, 0444, therm_throt_sysdev_show_##_name, NULL)
-
-#define define_therm_throt_sysdev_show_func(name) \
-static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev, \
- struct sysdev_attribute *attr, \
- char *buf) \
-{ \
- unsigned int cpu = dev->id; \
- ssize_t ret; \
- \
- preempt_disable(); /* CPU hotplug */ \
- if (cpu_online(cpu)) \
- ret = sprintf(buf, "%lu\n", \
- per_cpu(thermal_throttle_##name, cpu)); \
- else \
- ret = 0; \
- preempt_enable(); \
- \
- return ret; \
+#define define_therm_throt_sysdev_one_ro(_name) \
+ static SYSDEV_ATTR(_name, 0444, therm_throt_sysdev_show_##_name, NULL)
+
+#define define_therm_throt_sysdev_show_func(name) \
+static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev, \
+ struct sysdev_attribute *attr, \
+ char *buf) \
+{ \
+ unsigned int cpu = dev->id; \
+ ssize_t ret; \
+ \
+ preempt_disable(); /* CPU hotplug */ \
+ if (cpu_online(cpu)) \
+ ret = sprintf(buf, "%lu\n", \
+ per_cpu(thermal_throttle_##name, cpu)); \
+ else \
+ ret = 0; \
+ preempt_enable(); \
+ \
+ return ret; \
}
define_therm_throt_sysdev_show_func(count);
@@ -61,8 +61,8 @@ static struct attribute *thermal_throttle_attrs[] = {
};
static struct attribute_group thermal_throttle_attr_group = {
- .attrs = thermal_throttle_attrs,
- .name = "thermal_throttle"
+ .attrs = thermal_throttle_attrs,
+ .name = "thermal_throttle"
};
#endif /* CONFIG_SYSFS */
@@ -110,10 +110,11 @@ int therm_throt_process(int curr)
}
#ifdef CONFIG_SYSFS
-/* Add/Remove thermal_throttle interface for CPU device */
+/* Add/Remove thermal_throttle interface for CPU device: */
static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev)
{
- return sysfs_create_group(&sys_dev->kobj, &thermal_throttle_attr_group);
+ return sysfs_create_group(&sys_dev->kobj,
+ &thermal_throttle_attr_group);
}
static __cpuinit void thermal_throttle_remove_dev(struct sys_device *sys_dev)
@@ -121,19 +122,21 @@ static __cpuinit void thermal_throttle_remove_dev(struct sys_device *sys_dev)
sysfs_remove_group(&sys_dev->kobj, &thermal_throttle_attr_group);
}
-/* Mutex protecting device creation against CPU hotplug */
+/* Mutex protecting device creation against CPU hotplug: */
static DEFINE_MUTEX(therm_cpu_lock);
/* Get notified when a cpu comes on/off. Be hotplug friendly. */
-static __cpuinit int thermal_throttle_cpu_callback(struct notifier_block *nfb,
- unsigned long action,
- void *hcpu)
+static __cpuinit int
+thermal_throttle_cpu_callback(struct notifier_block *nfb,
+ unsigned long action,
+ void *hcpu)
{
unsigned int cpu = (unsigned long)hcpu;
struct sys_device *sys_dev;
int err = 0;
sys_dev = get_cpu_sysdev(cpu);
+
switch (action) {
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
diff --git a/arch/x86/kernel/cpu/mcheck/threshold.c b/arch/x86/kernel/cpu/mcheck/threshold.c
index 23ee9e730f78..d746df2909c9 100644
--- a/arch/x86/kernel/cpu/mcheck/threshold.c
+++ b/arch/x86/kernel/cpu/mcheck/threshold.c
@@ -17,7 +17,7 @@ static void default_threshold_interrupt(void)
void (*mce_threshold_vector)(void) = default_threshold_interrupt;
-asmlinkage void mce_threshold_interrupt(void)
+asmlinkage void smp_threshold_interrupt(void)
{
exit_idle();
irq_enter();
diff --git a/arch/x86/kernel/cpu/mcheck/winchip.c b/arch/x86/kernel/cpu/mcheck/winchip.c
index 2a043d89811d..81b02487090b 100644
--- a/arch/x86/kernel/cpu/mcheck/winchip.c
+++ b/arch/x86/kernel/cpu/mcheck/winchip.c
@@ -2,11 +2,10 @@
* IDT Winchip specific Machine Check Exception Reporting
* (C) Copyright 2002 Alan Cox <alan@lxorguk.ukuu.org.uk>
*/
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
#include <asm/processor.h>
#include <asm/system.h>
@@ -14,7 +13,7 @@
#include "mce.h"
-/* Machine check handler for WinChip C6 */
+/* Machine check handler for WinChip C6: */
static void winchip_machine_check(struct pt_regs *regs, long error_code)
{
printk(KERN_EMERG "CPU0: Machine Check Exception.\n");
@@ -25,12 +24,18 @@ static void winchip_machine_check(struct pt_regs *regs, long error_code)
void winchip_mcheck_init(struct cpuinfo_x86 *c)
{
u32 lo, hi;
+
machine_check_vector = winchip_machine_check;
+ /* Make sure the vector pointer is visible before we enable MCEs: */
wmb();
+
rdmsr(MSR_IDT_FCR1, lo, hi);
lo |= (1<<2); /* Enable EIERRINT (int 18 MCE) */
lo &= ~(1<<4); /* Enable MCE */
wrmsr(MSR_IDT_FCR1, lo, hi);
+
set_in_cr4(X86_CR4_MCE);
- printk(KERN_INFO "Winchip machine check reporting enabled on CPU#0.\n");
+
+ printk(KERN_INFO
+ "Winchip machine check reporting enabled on CPU#0.\n");
}
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index a4742a340d8d..de74f0a3e0ed 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -963,6 +963,8 @@ END(\sym)
#ifdef CONFIG_SMP
apicinterrupt IRQ_MOVE_CLEANUP_VECTOR \
irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt
+apicinterrupt REBOOT_VECTOR \
+ reboot_interrupt smp_reboot_interrupt
#endif
#ifdef CONFIG_X86_UV
@@ -994,10 +996,15 @@ apicinterrupt INVALIDATE_TLB_VECTOR_START+7 \
#endif
apicinterrupt THRESHOLD_APIC_VECTOR \
- threshold_interrupt mce_threshold_interrupt
+ threshold_interrupt smp_threshold_interrupt
apicinterrupt THERMAL_APIC_VECTOR \
thermal_interrupt smp_thermal_interrupt
+#ifdef CONFIG_X86_MCE
+apicinterrupt MCE_SELF_VECTOR \
+ mce_self_interrupt smp_mce_self_interrupt
+#endif
+
#ifdef CONFIG_SMP
apicinterrupt CALL_FUNCTION_SINGLE_VECTOR \
call_function_single_interrupt smp_call_function_single_interrupt
@@ -1379,7 +1386,7 @@ errorentry xen_stack_segment do_stack_segment
errorentry general_protection do_general_protection
errorentry page_fault do_page_fault
#ifdef CONFIG_X86_MCE
-paranoidzeroentry machine_check do_machine_check
+paranoidzeroentry machine_check *machine_check_vector(%rip)
#endif
/*
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 38287b5f116e..b0cdde6932f5 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -12,6 +12,7 @@
#include <asm/io_apic.h>
#include <asm/irq.h>
#include <asm/idle.h>
+#include <asm/mce.h>
#include <asm/hw_irq.h>
atomic_t irq_err_count;
@@ -96,13 +97,23 @@ static int show_other_interrupts(struct seq_file *p, int prec)
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->irq_thermal_count);
seq_printf(p, " Thermal event interrupts\n");
-# ifdef CONFIG_X86_64
+# ifdef CONFIG_X86_MCE_THRESHOLD
seq_printf(p, "%*s: ", prec, "THR");
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->irq_threshold_count);
seq_printf(p, " Threshold APIC interrupts\n");
# endif
#endif
+#ifdef CONFIG_X86_NEW_MCE
+ seq_printf(p, "%*s: ", prec, "MCE");
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ", per_cpu(mce_exception_count, j));
+ seq_printf(p, " Machine check exceptions\n");
+ seq_printf(p, "%*s: ", prec, "MCP");
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ", per_cpu(mce_poll_count, j));
+ seq_printf(p, " Machine check polls\n");
+#endif
seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
#if defined(CONFIG_X86_IO_APIC)
seq_printf(p, "%*s: %10u\n", prec, "MIS", atomic_read(&irq_mis_count));
@@ -185,10 +196,14 @@ u64 arch_irq_stat_cpu(unsigned int cpu)
#endif
#ifdef CONFIG_X86_MCE
sum += irq_stats(cpu)->irq_thermal_count;
-# ifdef CONFIG_X86_64
+# ifdef CONFIG_X86_MCE_THRESHOLD
sum += irq_stats(cpu)->irq_threshold_count;
# endif
#endif
+#ifdef CONFIG_X86_NEW_MCE
+ sum += per_cpu(mce_exception_count, cpu);
+ sum += per_cpu(mce_poll_count, cpu);
+#endif
return sum;
}
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 267c6624c77f..696f0e475c2d 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -173,6 +173,9 @@ static void __init smp_intr_init(void)
/* Low priority IPI to cleanup after moving an irq */
set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
+
+ /* IPI used for rebooting/stopping */
+ alloc_intr_gate(REBOOT_VECTOR, reboot_interrupt);
#endif
#endif /* CONFIG_SMP */
}
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 0a813b17b172..4c578751e94e 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -24,11 +24,11 @@
#include <asm/ucontext.h>
#include <asm/i387.h>
#include <asm/vdso.h>
+#include <asm/mce.h>
#ifdef CONFIG_X86_64
#include <asm/proto.h>
#include <asm/ia32_unistd.h>
-#include <asm/mce.h>
#endif /* CONFIG_X86_64 */
#include <asm/syscall.h>
@@ -856,10 +856,10 @@ static void do_signal(struct pt_regs *regs)
void
do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
{
-#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE)
+#ifdef CONFIG_X86_NEW_MCE
/* notify userspace of pending MCEs */
if (thread_info_flags & _TIF_MCE_NOTIFY)
- mce_notify_user();
+ mce_notify_process();
#endif /* CONFIG_X86_64 && CONFIG_X86_MCE */
/* deal with pending signal delivery */
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 28f5fb495a66..ec1de97600e7 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -150,14 +150,40 @@ void native_send_call_func_ipi(const struct cpumask *mask)
* this function calls the 'stop' function on all other CPUs in the system.
*/
+asmlinkage void smp_reboot_interrupt(void)
+{
+ ack_APIC_irq();
+ irq_enter();
+ stop_this_cpu(NULL);
+ irq_exit();
+}
+
static void native_smp_send_stop(void)
{
unsigned long flags;
+ unsigned long wait;
if (reboot_force)
return;
- smp_call_function(stop_this_cpu, NULL, 0);
+ /*
+ * Use an own vector here because smp_call_function
+ * does lots of things not suitable in a panic situation.
+ * On most systems we could also use an NMI here,
+ * but there are a few systems around where NMI
+ * is problematic so stay with an non NMI for now
+ * (this implies we cannot stop CPUs spinning with irq off
+ * currently)
+ */
+ if (num_online_cpus() > 1) {
+ apic->send_IPI_allbutself(REBOOT_VECTOR);
+
+ /* Don't wait longer than a second */
+ wait = USEC_PER_SEC;
+ while (num_online_cpus() > 1 && wait--)
+ udelay(1);
+ }
+
local_irq_save(flags);
disable_local_APIC();
local_irq_restore(flags);
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 07d60c870ce2..1e1e27b7d438 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -798,15 +798,15 @@ unsigned long patch_espfix_desc(unsigned long uesp, unsigned long kesp)
return new_kesp;
}
-#else
+#endif
+
asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void)
{
}
-asmlinkage void __attribute__((weak)) mce_threshold_interrupt(void)
+asmlinkage void __attribute__((weak)) smp_threshold_interrupt(void)
{
}
-#endif
/*
* 'math_state_restore()' saves the current math information in the