diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/mach-sti/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-sti/headsmp.S | 43 | ||||
| -rw-r--r-- | arch/arm/mach-sti/platsmp.c | 88 |
3 files changed, 15 insertions, 118 deletions
diff --git a/arch/arm/mach-sti/Makefile b/arch/arm/mach-sti/Makefile index acb330916333..f85ff059cfba 100644 --- a/arch/arm/mach-sti/Makefile +++ b/arch/arm/mach-sti/Makefile @@ -1,2 +1,2 @@ -obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_ARCH_STI) += board-dt.o diff --git a/arch/arm/mach-sti/headsmp.S b/arch/arm/mach-sti/headsmp.S deleted file mode 100644 index e0ad451700d5..000000000000 --- a/arch/arm/mach-sti/headsmp.S +++ /dev/null @@ -1,43 +0,0 @@ -/* - * arch/arm/mach-sti/headsmp.S - * - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * http://www.st.com - * - * Cloned from linux/arch/arm/mach-vexpress/headsmp.S - * - * Copyright (c) 2003 ARM Limited - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <linux/init.h> - -/* - * ST specific entry point for secondary CPUs. This provides - * a "holding pen" into which all secondary cores are held until we're - * ready for them to initialise. - */ -ENTRY(sti_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #15 - adr r4, 1f - ldmia r4, {r5, r6} - sub r4, r4, r5 - add r6, r6, r4 -pen: ldr r7, [r6] - cmp r7, r0 - bne pen - - /* - * we've been released from the holding pen: secondary_stack - * should now contain the SVC stack for this core - */ - b secondary_startup -ENDPROC(sti_secondary_startup) - -1: .long . - .long pen_release diff --git a/arch/arm/mach-sti/platsmp.c b/arch/arm/mach-sti/platsmp.c index 231f19e17436..d0272a839ffb 100644 --- a/arch/arm/mach-sti/platsmp.c +++ b/arch/arm/mach-sti/platsmp.c @@ -28,82 +28,33 @@ #include "smp.h" -static void write_pen_release(int val) -{ - pen_release = val; - smp_wmb(); - sync_cache_w(&pen_release); -} - -static DEFINE_SPINLOCK(boot_lock); - -static void sti_secondary_init(unsigned int cpu) -{ - /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - write_pen_release(-1); - - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} +static u32 __iomem *cpu_strt_ptr; static int sti_boot_secondary(unsigned int cpu, struct task_struct *idle) { - unsigned long timeout; - - /* - * set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); + unsigned long entry_pa = __pa_symbol(secondary_startup); /* - * The secondary processor is waiting to be released from - * the holding pen - release it, then wait for it to flag - * that it has been released by resetting pen_release. - * - * Note that "pen_release" is the hardware CPU ID, whereas - * "cpu" is Linux's internal ID. + * Secondary CPU is initialised and started by a U-BOOTROM firmware. + * Secondary CPU is spinning and waiting for a write at cpu_strt_ptr. + * Writing secondary_startup address at cpu_strt_ptr makes it to + * jump directly to secondary_startup(). */ - write_pen_release(cpu_logical_map(cpu)); + __raw_writel(entry_pa, cpu_strt_ptr); - /* - * Send the secondary CPU a soft interrupt, thereby causing - * it to jump to the secondary entrypoint. - */ - arch_send_wakeup_ipi_mask(cpumask_of(cpu)); - - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - smp_rmb(); - if (pen_release == -1) - break; - - udelay(10); - } - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); + /* wmb so that data is actually written before cache flush is done */ + smp_wmb(); + sync_cache_w(cpu_strt_ptr); - return pen_release != -1 ? -ENOSYS : 0; + return 0; } static void __init sti_smp_prepare_cpus(unsigned int max_cpus) { struct device_node *np; void __iomem *scu_base; - u32 __iomem *cpu_strt_ptr; u32 release_phys; int cpu; - unsigned long entry_pa = __pa_symbol(sti_secondary_startup); np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); @@ -131,8 +82,8 @@ static void __init sti_smp_prepare_cpus(unsigned int max_cpus) } /* - * holding pen is usually configured in SBC DMEM but can also be - * in RAM. + * cpu-release-addr is usually configured in SBC DMEM but can + * also be in RAM. */ if (!memblock_is_memory(release_phys)) @@ -142,22 +93,11 @@ static void __init sti_smp_prepare_cpus(unsigned int max_cpus) cpu_strt_ptr = (u32 __iomem *)phys_to_virt(release_phys); - __raw_writel(entry_pa, cpu_strt_ptr); - - /* - * wmb so that data is actually written - * before cache flush is done - */ - smp_wmb(); - sync_cache_w(cpu_strt_ptr); - - if (!memblock_is_memory(release_phys)) - iounmap(cpu_strt_ptr); + set_cpu_possible(cpu, true); } } const struct smp_operations sti_smp_ops __initconst = { .smp_prepare_cpus = sti_smp_prepare_cpus, - .smp_secondary_init = sti_secondary_init, .smp_boot_secondary = sti_boot_secondary, }; |