diff options
Diffstat (limited to 'arch')
81 files changed, 446 insertions, 2153 deletions
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 33ee2c863d18..6b7c41d155df 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -1,7 +1,7 @@ # # Makefile for the linux kernel. # -obj-y := core.o clock.o dma-m2p.o gpio.o +obj-y := core.o clock.o dma-m2p.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 6659a0d137a3..c488e4bd61e7 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -174,14 +174,10 @@ struct sys_timer ep93xx_timer = { /************************************************************************* * EP93xx IRQ handling *************************************************************************/ -extern void ep93xx_gpio_init_irq(void); - void __init ep93xx_init_irq(void) { vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0); vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0); - - ep93xx_gpio_init_irq(); } @@ -241,6 +237,24 @@ unsigned int ep93xx_chip_revision(void) } /************************************************************************* + * EP93xx GPIO + *************************************************************************/ +static struct resource ep93xx_gpio_resource[] = { + { + .start = EP93XX_GPIO_PHYS_BASE, + .end = EP93XX_GPIO_PHYS_BASE + 0xcc - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ep93xx_gpio_device = { + .name = "gpio-ep93xx", + .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_gpio_resource), + .resource = ep93xx_gpio_resource, +}; + +/************************************************************************* * EP93xx peripheral handling *************************************************************************/ #define EP93XX_UART_MCR_OFFSET (0x0100) @@ -870,14 +884,13 @@ void __init ep93xx_register_ac97(void) platform_device_register(&ep93xx_pcm_device); } -extern void ep93xx_gpio_init(void); - void __init ep93xx_init_devices(void) { /* Disallow access to MaverickCrunch initially */ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA); - ep93xx_gpio_init(); + /* Get the GPIO working early, other devices need it */ + platform_device_register(&ep93xx_gpio_device); amba_device_register(&uart1_device, &iomem_resource); amba_device_register(&uart2_device, &iomem_resource); diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c deleted file mode 100644 index 415dce37b88c..000000000000 --- a/arch/arm/mach-ep93xx/gpio.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * linux/arch/arm/mach-ep93xx/gpio.c - * - * Generic EP93xx GPIO handling - * - * Copyright (c) 2008 Ryan Mallon <ryan@bluewatersys.com> - * - * Based on code originally from: - * linux/arch/arm/mach-ep93xx/core.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/seq_file.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/irq.h> - -#include <mach/hardware.h> - -/************************************************************************* - * Interrupt handling for EP93xx on-chip GPIOs - *************************************************************************/ -static unsigned char gpio_int_unmasked[3]; -static unsigned char gpio_int_enabled[3]; -static unsigned char gpio_int_type1[3]; -static unsigned char gpio_int_type2[3]; -static unsigned char gpio_int_debounce[3]; - -/* Port ordering is: A B F */ -static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c }; -static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 }; -static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 }; -static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 }; -static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 }; - -static void ep93xx_gpio_update_int_params(unsigned port) -{ - BUG_ON(port > 2); - - __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port])); - - __raw_writeb(gpio_int_type2[port], - EP93XX_GPIO_REG(int_type2_register_offset[port])); - - __raw_writeb(gpio_int_type1[port], - EP93XX_GPIO_REG(int_type1_register_offset[port])); - - __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port], - EP93XX_GPIO_REG(int_en_register_offset[port])); -} - -static inline void ep93xx_gpio_int_mask(unsigned line) -{ - gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); -} - -static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable) -{ - int line = irq_to_gpio(irq); - int port = line >> 3; - int port_mask = 1 << (line & 7); - - if (enable) - gpio_int_debounce[port] |= port_mask; - else - gpio_int_debounce[port] &= ~port_mask; - - __raw_writeb(gpio_int_debounce[port], - EP93XX_GPIO_REG(int_debounce_register_offset[port])); -} - -static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned char status; - int i; - - status = __raw_readb(EP93XX_GPIO_A_INT_STATUS); - for (i = 0; i < 8; i++) { - if (status & (1 << i)) { - int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i; - generic_handle_irq(gpio_irq); - } - } - - status = __raw_readb(EP93XX_GPIO_B_INT_STATUS); - for (i = 0; i < 8; i++) { - if (status & (1 << i)) { - int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i; - generic_handle_irq(gpio_irq); - } - } -} - -static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - /* - * map discontiguous hw irq range to continuous sw irq range: - * - * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7}) - */ - int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */ - int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx; - - generic_handle_irq(gpio_irq); -} - -static void ep93xx_gpio_irq_ack(struct irq_data *d) -{ - int line = irq_to_gpio(d->irq); - int port = line >> 3; - int port_mask = 1 << (line & 7); - - if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { - gpio_int_type2[port] ^= port_mask; /* switch edge direction */ - ep93xx_gpio_update_int_params(port); - } - - __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); -} - -static void ep93xx_gpio_irq_mask_ack(struct irq_data *d) -{ - int line = irq_to_gpio(d->irq); - int port = line >> 3; - int port_mask = 1 << (line & 7); - - if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) - gpio_int_type2[port] ^= port_mask; /* switch edge direction */ - - gpio_int_unmasked[port] &= ~port_mask; - ep93xx_gpio_update_int_params(port); - - __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); -} - -static void ep93xx_gpio_irq_mask(struct irq_data *d) -{ - int line = irq_to_gpio(d->irq); - int port = line >> 3; - - gpio_int_unmasked[port] &= ~(1 << (line & 7)); - ep93xx_gpio_update_int_params(port); -} - -static void ep93xx_gpio_irq_unmask(struct irq_data *d) -{ - int line = irq_to_gpio(d->irq); - int port = line >> 3; - - gpio_int_unmasked[port] |= 1 << (line & 7); - ep93xx_gpio_update_int_params(port); -} - -/* - * gpio_int_type1 controls whether the interrupt is level (0) or - * edge (1) triggered, while gpio_int_type2 controls whether it - * triggers on low/falling (0) or high/rising (1). - */ -static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type) -{ - const int gpio = irq_to_gpio(d->irq); - const int port = gpio >> 3; - const int port_mask = 1 << (gpio & 7); - irq_flow_handler_t handler; - - gpio_direction_input(gpio); - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - gpio_int_type1[port] |= port_mask; - gpio_int_type2[port] |= port_mask; - handler = handle_edge_irq; - break; - case IRQ_TYPE_EDGE_FALLING: - gpio_int_type1[port] |= port_mask; - gpio_int_type2[port] &= ~port_mask; - handler = handle_edge_irq; - break; - case IRQ_TYPE_LEVEL_HIGH: - gpio_int_type1[port] &= ~port_mask; - gpio_int_type2[port] |= port_mask; - handler = handle_level_irq; - break; - case IRQ_TYPE_LEVEL_LOW: - gpio_int_type1[port] &= ~port_mask; - gpio_int_type2[port] &= ~port_mask; - handler = handle_level_irq; - break; - case IRQ_TYPE_EDGE_BOTH: - gpio_int_type1[port] |= port_mask; - /* set initial polarity based on current input level */ - if (gpio_get_value(gpio)) - gpio_int_type2[port] &= ~port_mask; /* falling */ - else - gpio_int_type2[port] |= port_mask; /* rising */ - handler = handle_edge_irq; - break; - default: - pr_err("failed to set irq type %d for gpio %d\n", type, gpio); - return -EINVAL; - } - - __irq_set_handler_locked(d->irq, handler); - - gpio_int_enabled[port] |= port_mask; - - ep93xx_gpio_update_int_params(port); - - return 0; -} - -static struct irq_chip ep93xx_gpio_irq_chip = { - .name = "GPIO", - .irq_ack = ep93xx_gpio_irq_ack, - .irq_mask_ack = ep93xx_gpio_irq_mask_ack, - .irq_mask = ep93xx_gpio_irq_mask, - .irq_unmask = ep93xx_gpio_irq_unmask, - .irq_set_type = ep93xx_gpio_irq_type, -}; - -void __init ep93xx_gpio_init_irq(void) -{ - int gpio_irq; - - for (gpio_irq = gpio_to_irq(0); - gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) { - irq_set_chip_and_handler(gpio_irq, &ep93xx_gpio_irq_chip, - handle_level_irq); - set_irq_flags(gpio_irq, IRQF_VALID); - } - - irq_set_chained_handler(IRQ_EP93XX_GPIO_AB, - ep93xx_gpio_ab_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO0MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO1MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO2MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO3MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO4MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO5MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO6MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO7MUX, - ep93xx_gpio_f_irq_handler); -} - - -/************************************************************************* - * gpiolib interface for EP93xx on-chip GPIOs - *************************************************************************/ -struct ep93xx_gpio_chip { - struct gpio_chip chip; - - void __iomem *data_reg; - void __iomem *data_dir_reg; -}; - -#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip) - -static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - unsigned long flags; - u8 v; - - local_irq_save(flags); - v = __raw_readb(ep93xx_chip->data_dir_reg); - v &= ~(1 << offset); - __raw_writeb(v, ep93xx_chip->data_dir_reg); - local_irq_restore(flags); - - return 0; -} - -static int ep93xx_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int val) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - unsigned long flags; - int line; - u8 v; - - local_irq_save(flags); - - /* Set the value */ - v = __raw_readb(ep93xx_chip->data_reg); - if (val) - v |= (1 << offset); - else - v &= ~(1 << offset); - __raw_writeb(v, ep93xx_chip->data_reg); - - /* Drive as an output */ - line = chip->base + offset; - if (line <= EP93XX_GPIO_LINE_MAX_IRQ) { - /* Ports A/B/F */ - ep93xx_gpio_int_mask(line); - ep93xx_gpio_update_int_params(line >> 3); - } - - v = __raw_readb(ep93xx_chip->data_dir_reg); - v |= (1 << offset); - __raw_writeb(v, ep93xx_chip->data_dir_reg); - - local_irq_restore(flags); - - return 0; -} - -static int ep93xx_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - - return !!(__raw_readb(ep93xx_chip->data_reg) & (1 << offset)); -} - -static void ep93xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - unsigned long flags; - u8 v; - - local_irq_save(flags); - v = __raw_readb(ep93xx_chip->data_reg); - if (val) - v |= (1 << offset); - else - v &= ~(1 << offset); - __raw_writeb(v, ep93xx_chip->data_reg); - local_irq_restore(flags); -} - -static int ep93xx_gpio_set_debounce(struct gpio_chip *chip, - unsigned offset, unsigned debounce) -{ - int gpio = chip->base + offset; - int irq = gpio_to_irq(gpio); - - if (irq < 0) - return -EINVAL; - - ep93xx_gpio_int_debounce(irq, debounce ? true : false); - - return 0; -} - -#define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio) \ - { \ - .chip = { \ - .label = name, \ - .direction_input = ep93xx_gpio_direction_input, \ - .direction_output = ep93xx_gpio_direction_output, \ - .get = ep93xx_gpio_get, \ - .set = ep93xx_gpio_set, \ - .base = base_gpio, \ - .ngpio = 8, \ - }, \ - .data_reg = EP93XX_GPIO_REG(dr), \ - .data_dir_reg = EP93XX_GPIO_REG(ddr), \ - } - -static struct ep93xx_gpio_chip ep93xx_gpio_banks[] = { - EP93XX_GPIO_BANK("A", 0x00, 0x10, 0), - EP93XX_GPIO_BANK("B", 0x04, 0x14, 8), - EP93XX_GPIO_BANK("C", 0x08, 0x18, 40), - EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24), - EP93XX_GPIO_BANK("E", 0x20, 0x24, 32), - EP93XX_GPIO_BANK("F", 0x30, 0x34, 16), - EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48), - EP93XX_GPIO_BANK("H", 0x40, 0x44, 56), -}; - -void __init ep93xx_gpio_init(void) -{ - int i; - - /* Set Ports C, D, E, G, and H for GPIO use */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | - EP93XX_SYSCON_DEVCFG_GONK | - EP93XX_SYSCON_DEVCFG_EONIDE | - EP93XX_SYSCON_DEVCFG_GONIDE | - EP93XX_SYSCON_DEVCFG_HONIDE); - - for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) { - struct gpio_chip *chip = &ep93xx_gpio_banks[i].chip; - - /* - * Ports A, B, and F support input debouncing when - * used as interrupts. - */ - if (!strcmp(chip->label, "A") || - !strcmp(chip->label, "B") || - !strcmp(chip->label, "F")) - chip->set_debounce = ep93xx_gpio_set_debounce; - - gpiochip_add(chip); - } -} diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index 9ac4d1055097..c4a7b84ef06d 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -98,6 +98,7 @@ #define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000) +#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000) #define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000) #define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) #define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c index 15e45c84e371..59d2a3b137d9 100644 --- a/arch/arm/mach-imx/mach-apf9328.c +++ b/arch/arm/mach-imx/mach-apf9328.c @@ -115,6 +115,8 @@ static struct platform_device *devices[] __initdata = { static void __init apf9328_init(void) { + imx1_soc_init(); + mxc_gpio_setup_multiple_pins(apf9328_pins, ARRAY_SIZE(apf9328_pins), "APF9328"); diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index ffb40ff619b1..ede2710f8b76 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -490,6 +490,8 @@ static struct platform_device *devices[] __initdata = { */ static void __init armadillo5x0_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(armadillo5x0_pins, ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0"); diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c index 42e4f078a19c..f49470553bdf 100644 --- a/arch/arm/mach-imx/mach-bug.c +++ b/arch/arm/mach-imx/mach-bug.c @@ -42,6 +42,8 @@ static const unsigned int bug_pins[] __initconst = { static void __init bug_board_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(bug_pins, ARRAY_SIZE(bug_pins), "uart-4"); imx31_add_imx_uart4(&uart_pdata); diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 46a2e41d43d2..87887ac5806b 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -250,6 +250,8 @@ __setup("otg_mode=", eukrea_cpuimx27_otg_mode); static void __init eukrea_cpuimx27_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins, ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27"); diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 3f8ef825fa6f..f39a478ba1a6 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -156,6 +156,8 @@ __setup("otg_mode=", eukrea_cpuimx35_otg_mode); */ static void __init eukrea_cpuimx35_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads, ARRAY_SIZE(eukrea_cpuimx35_pads)); diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index 148cff2819b9..da36da52969d 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -125,6 +125,8 @@ __setup("otg_mode=", eukrea_cpuimx25_otg_mode); static void __init eukrea_cpuimx25_init(void) { + imx25_soc_init(); + if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads, ARRAY_SIZE(eukrea_cpuimx25_pads))) printk(KERN_ERR "error setting cpuimx25 pads !\n"); diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 7ae43b1ec517..c6269d60ddbc 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -231,6 +231,8 @@ static void __init visstrim_m10_board_init(void) { int ret; + imx27_soc_init(); + ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins, ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10"); if (ret) diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index 9be6cd6fbf8c..272f793e9247 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -50,6 +50,8 @@ static const int mx27ipcam_pins[] __initconst = { static void __init mx27ipcam_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins), "mx27ipcam"); diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index 841140516ede..d81a769fe895 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -59,6 +59,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static void __init mx27lite_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins), "imx27lite"); imx27_add_imx_uart0(&uart_pdata); diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 1ecae20cf4e3..e472a1d88058 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -223,6 +223,8 @@ static int kzm_pins[] __initdata = { */ static void __init kzm_board_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(kzm_pins, ARRAY_SIZE(kzm_pins), "kzm"); kzm_init_ext_uart(); diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 38ec5cbbda9b..5cd8bee46960 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -115,6 +115,8 @@ static struct i2c_board_info mx1ads_i2c_devices[] = { */ static void __init mx1ads_init(void) { + imx1_soc_init(); + mxc_gpio_setup_multiple_pins(mx1ads_pins, ARRAY_SIZE(mx1ads_pins), "mx1ads"); diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 74ac88978ddd..d389ecf9b5a8 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -279,6 +279,8 @@ static struct platform_device *platform_devices[] __initdata = { static void __init mx21ads_board_init(void) { + imx21_soc_init(); + mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins), "mx21ads"); diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index 58ea3fdf0911..01534bb61305 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -219,6 +219,8 @@ static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = { static void __init mx25pdk_init(void) { + imx25_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads, ARRAY_SIZE(mx25pdk_pads)); diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 6e1accf93f81..117ce0a50f4e 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -267,6 +267,8 @@ static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = { static void __init mx27pdk_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), "mx27pdk"); mx27_3ds_sdhc1_enable_level_translator(); diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 1db79506f5e4..fc26ed71b9ed 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -288,6 +288,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static void __init mx27ads_board_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins), "mx27ads"); diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index b5ecc26d08a4..441fbb83f39c 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -690,6 +690,8 @@ static void __init mx31_3ds_init(void) { int ret; + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), "mx31_3ds"); diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index f4dee0254634..0ce49478a479 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -516,6 +516,8 @@ static void __init mx31ads_init_irq(void) static void __init mx31ads_init(void) { + imx31_soc_init(); + mxc_init_extuart(); mxc_init_imx_uart(); mxc_init_i2c(); diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 410e676ae087..750368ddf0f9 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -243,6 +243,8 @@ core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444); static void __init mx31lilly_board_init(void) { + imx31_soc_init(); + switch (mx31lilly_baseboard) { case MX31LILLY_NOBOARD: break; diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index ac9b4cad320e..4b47fd9fdd89 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -230,6 +230,8 @@ static void __init mx31lite_init(void) { int ret; + imx31_soc_init(); + switch (mx31lite_baseboard) { case MX31LITE_NOBOARD: break; diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index eaa51e49ca95..a52fd36e2b52 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -507,6 +507,8 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444); */ static void __init mx31moboard_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins), "moboard"); diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 882880ac1bbc..48b3c6fd5cf0 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -179,6 +179,8 @@ static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = { */ static void __init mx35_3ds_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); imx35_add_fec(NULL); diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index 2774541511e7..c85876fed663 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -233,6 +233,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static void __init mxt_td60_board_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins), "MXT_TD60"); diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index bbddc5a11c43..71083aa16038 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -357,6 +357,8 @@ static void __init pca100_init(void) { int ret; + imx27_soc_init(); + /* SSI unit */ mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */ diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 89c213b81295..f45b7cd72c8a 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -576,6 +576,8 @@ static void __init pcm037_init(void) { int ret; + imx31_soc_init(); + mxc_iomux_set_gpr(MUX_PGP_UH2, 1); mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 853bb871c7ed..2d6a64bbac44 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -295,6 +295,8 @@ static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { static void __init pcm038_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins), "PCM038"); diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 026441628dfa..163cc318cafb 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -356,6 +356,8 @@ static struct esdhc_platform_data sd1_pdata = { */ static void __init pcm043_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); mxc_audmux_v2_configure_port(3, diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index c16328715939..3626f486498a 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -244,6 +244,8 @@ static void __init qong_init_fpga(void) */ static void __init qong_init(void) { + imx31_soc_init(); + mxc_init_imx_uart(); qong_init_nor_mtd(); qong_init_fpga(); diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index dcaee043628e..82805260e19c 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -129,6 +129,8 @@ static struct platform_device *devices[] __initdata = { */ static void __init scb9328_init(void) { + imx1_soc_init(); + imx1_add_imx_uart0(&uart_pdata); printk(KERN_INFO"Scb9328: Adding devices\n"); diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index d74e3473d236..7d8e012a6335 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -267,6 +267,8 @@ static struct platform_device *devices[] __initdata = { */ static void __init vpr200_board_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads)); imx35_add_fec(NULL); diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index 2e482ba5a0e7..2bded591d5c2 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -23,7 +23,6 @@ #include <mach/common.h> #include <mach/hardware.h> -#include <mach/gpio.h> #include <mach/irqs.h> #include <mach/iomux-v1.h> @@ -44,15 +43,19 @@ void __init imx1_init_early(void) MX1_NUM_GPIO_PORT); } -static struct mxc_gpio_port imx1_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 0, 1, MX1_GPIO_INT_PORTA), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 1, 2, MX1_GPIO_INT_PORTB), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 2, 3, MX1_GPIO_INT_PORTC), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 3, 4, MX1_GPIO_INT_PORTD), -}; - void __init mx1_init_irq(void) { mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR)); - mxc_gpio_init(imx1_gpio_ports, ARRAY_SIZE(imx1_gpio_ports)); +} + +void __init imx1_soc_init(void) +{ + mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTA, 0); + mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTB, 0); + mxc_register_gpio("imx1-gpio", 2, MX1_GPIO3_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTC, 0); + mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTD, 0); } diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index 7a0c500ac2c8..6d7d518686a5 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -24,7 +24,6 @@ #include <mach/common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <mach/irqs.h> #include <mach/iomux-v1.h> @@ -70,17 +69,17 @@ void __init imx21_init_early(void) MX21_NUM_GPIO_PORT); } -static struct mxc_gpio_port imx21_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX21, 0, 1, MX21_INT_GPIO), - DEFINE_IMX_GPIO_PORT(MX21, 1, 2), - DEFINE_IMX_GPIO_PORT(MX21, 2, 3), - DEFINE_IMX_GPIO_PORT(MX21, 3, 4), - DEFINE_IMX_GPIO_PORT(MX21, 4, 5), - DEFINE_IMX_GPIO_PORT(MX21, 5, 6), -}; - void __init mx21_init_irq(void) { mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR)); - mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports)); +} + +void __init imx21_soc_init(void) +{ + mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); } diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index 02f7b5c7fa8e..9a1591c2508d 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -27,7 +27,6 @@ #include <mach/hardware.h> #include <mach/mx25.h> #include <mach/iomux-v3.h> -#include <mach/gpio.h> #include <mach/irqs.h> /* @@ -57,16 +56,16 @@ void __init imx25_init_early(void) mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx25_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 0, 1, MX25_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 1, 2, MX25_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 2, 3, MX25_INT_GPIO3), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 3, 4, MX25_INT_GPIO4), -}; - void __init mx25_init_irq(void) { mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR)); - mxc_gpio_init(imx25_gpio_ports, ARRAY_SIZE(imx25_gpio_ports)); } +void __init imx25_soc_init(void) +{ + /* i.mx25 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0); + mxc_register_gpio("imx31-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0); + mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0); + mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0); +} diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index a6761a39f08c..133b30003ddb 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -24,7 +24,6 @@ #include <mach/common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <mach/irqs.h> #include <mach/iomux-v1.h> @@ -70,17 +69,18 @@ void __init imx27_init_early(void) MX27_NUM_GPIO_PORT); } -static struct mxc_gpio_port imx27_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX27, 0, 1, MX27_INT_GPIO), - DEFINE_IMX_GPIO_PORT(MX27, 1, 2), - DEFINE_IMX_GPIO_PORT(MX27, 2, 3), - DEFINE_IMX_GPIO_PORT(MX27, 3, 4), - DEFINE_IMX_GPIO_PORT(MX27, 4, 5), - DEFINE_IMX_GPIO_PORT(MX27, 5, 6), -}; - void __init mx27_init_irq(void) { mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR)); - mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports)); +} + +void __init imx27_soc_init(void) +{ + /* i.mx27 has the i.mx21 type gpio */ + mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); } diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c index 86b9b45864d2..6d103c01b8b9 100644 --- a/arch/arm/mach-imx/mm-imx31.c +++ b/arch/arm/mach-imx/mm-imx31.c @@ -26,7 +26,6 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-v3.h> -#include <mach/gpio.h> #include <mach/irqs.h> static struct map_desc mx31_io_desc[] __initdata = { @@ -53,14 +52,14 @@ void __init imx31_init_early(void) mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx31_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3), -}; - void __init mx31_init_irq(void) { mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); - mxc_gpio_init(imx31_gpio_ports, ARRAY_SIZE(imx31_gpio_ports)); +} + +void __init imx31_soc_init(void) +{ + mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0); + mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); + mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); } diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c index c880e6d1ae55..bb068bc8dab7 100644 --- a/arch/arm/mach-imx/mm-imx35.c +++ b/arch/arm/mach-imx/mm-imx35.c @@ -27,7 +27,6 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-v3.h> -#include <mach/gpio.h> #include <mach/irqs.h> static struct map_desc mx35_io_desc[] __initdata = { @@ -50,14 +49,15 @@ void __init imx35_init_early(void) mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx35_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3), -}; - void __init mx35_init_irq(void) { mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); - mxc_gpio_init(imx35_gpio_ports, ARRAY_SIZE(imx35_gpio_ports)); +} + +void __init imx35_soc_init(void) +{ + /* i.mx35 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); + mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); + mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); } diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 4efa02ee1639..add0d42de7af 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -245,6 +245,8 @@ __setup("otg_mode=", eukrea_cpuimx51_otg_mode); */ static void __init eukrea_cpuimx51_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads, ARRAY_SIZE(eukrea_cpuimx51_pads)); diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c index 5ef25a596143..ff096d587299 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c @@ -264,6 +264,8 @@ static struct platform_device *platform_devices[] __initdata = { static void __init eukrea_cpuimx51sd_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads, ARRAY_SIZE(eukrea_cpuimx51sd_pads)); diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c index 11210e1ae42a..7de25c6712eb 100644 --- a/arch/arm/mach-mx5/board-mx50_rdp.c +++ b/arch/arm/mach-mx5/board-mx50_rdp.c @@ -192,6 +192,8 @@ static const struct imxi2c_platform_data i2c_data __initconst = { */ static void __init mx50_rdp_board_init(void) { + imx50_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads, ARRAY_SIZE(mx50_rdp_pads)); diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index 63dfbeafbc1e..3112d15feebc 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -135,6 +135,8 @@ static struct spi_board_info mx51_3ds_spi_nor_device[] = { */ static void __init mx51_3ds_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads, ARRAY_SIZE(mx51_3ds_pads)); diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index c7b3fabf50f9..6021dd00ec75 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -340,6 +340,8 @@ static void __init mx51_babbage_init(void) iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 | MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP); + imx51_soc_init(); + #if defined(CONFIG_CPU_FREQ_IMX) get_cpu_op = mx51_get_cpu_op; #endif diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index 6e362315291b..3be603b9075a 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -236,6 +236,8 @@ late_initcall(mx51_efikamx_power_init); static void __init mx51_efikamx_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads, ARRAY_SIZE(mx51efikamx_pads)); efika_board_common_init(); diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c index 474fc6e4c6df..4b2e522de0f8 100644 --- a/arch/arm/mach-mx5/board-mx51_efikasb.c +++ b/arch/arm/mach-mx5/board-mx51_efikasb.c @@ -248,6 +248,8 @@ static void __init mx51_efikasb_board_id(void) static void __init efikasb_board_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads, ARRAY_SIZE(mx51efikasb_pads)); efika_board_common_init(); diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index f87d571882c6..0d9218a6e2d2 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -117,6 +117,8 @@ static const struct spi_imx_master mx53_evk_spi_data __initconst = { static void __init mx53_evk_board_init(void) { + imx53_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads, ARRAY_SIZE(mx53_evk_pads)); mx53_evk_init_uart(); diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 1b947e8c9c0c..359c3e248add 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -227,6 +227,8 @@ static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = { static void __init mx53_loco_board_init(void) { + imx53_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads, ARRAY_SIZE(mx53_loco_pads)); imx53_add_imx_uart(0, NULL); diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c index 817c08938f55..bc02894eafef 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-mx5/board-mx53_smd.c @@ -113,6 +113,8 @@ static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = { static void __init mx53_smd_board_init(void) { + imx53_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads, ARRAY_SIZE(mx53_smd_pads)); mx53_smd_init_uart(); diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c index 153ada53e575..371ca8c8414c 100644 --- a/arch/arm/mach-mx5/devices.c +++ b/arch/arm/mach-mx5/devices.c @@ -12,7 +12,6 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <linux/gpio.h> #include <mach/hardware.h> #include <mach/imx-uart.h> #include <mach/irqs.h> @@ -119,66 +118,3 @@ struct platform_device mxc_usbh2_device = { .coherent_dma_mask = DMA_BIT_MASK(32), }, }; - -static struct mxc_gpio_port mxc_gpio_ports[] = { - { - .chip.label = "gpio-0", - .base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR), - .irq = MX51_MXC_INT_GPIO1_LOW, - .irq_high = MX51_MXC_INT_GPIO1_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START - }, - { - .chip.label = "gpio-1", - .base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR), - .irq = MX51_MXC_INT_GPIO2_LOW, - .irq_high = MX51_MXC_INT_GPIO2_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1 - }, - { - .chip.label = "gpio-2", - .base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR), - .irq = MX51_MXC_INT_GPIO3_LOW, - .irq_high = MX51_MXC_INT_GPIO3_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2 - }, - { - .chip.label = "gpio-3", - .base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR), - .irq = MX51_MXC_INT_GPIO4_LOW, - .irq_high = MX51_MXC_INT_GPIO4_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3 - }, - { - .chip.label = "gpio-4", - .base = MX53_IO_ADDRESS(MX53_GPIO5_BASE_ADDR), - .irq = MX53_INT_GPIO5_LOW, - .irq_high = MX53_INT_GPIO5_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 4 - }, - { - .chip.label = "gpio-5", - .base = MX53_IO_ADDRESS(MX53_GPIO6_BASE_ADDR), - .irq = MX53_INT_GPIO6_LOW, - .irq_high = MX53_INT_GPIO6_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 5 - }, - { - .chip.label = "gpio-6", - .base = MX53_IO_ADDRESS(MX53_GPIO7_BASE_ADDR), - .irq = MX53_INT_GPIO7_LOW, - .irq_high = MX53_INT_GPIO7_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 6 - }, -}; - -int __init imx51_register_gpios(void) -{ - return mxc_gpio_init(mxc_gpio_ports, 4); -} - -int __init imx53_register_gpios(void) -{ - return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports)); -} - diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c index b9c363b514a9..77e374c726fa 100644 --- a/arch/arm/mach-mx5/mm-mx50.c +++ b/arch/arm/mach-mx5/mm-mx50.c @@ -26,7 +26,6 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-v3.h> -#include <mach/gpio.h> #include <mach/irqs.h> /* @@ -56,17 +55,18 @@ void __init imx50_init_early(void) mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx50_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 0, 1, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 1, 2, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 2, 3, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 3, 4, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 4, 5, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 5, 6, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), -}; - void __init mx50_init_irq(void) { tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR)); - mxc_gpio_init(imx50_gpio_ports, ARRAY_SIZE(imx50_gpio_ports)); +} + +void __init imx50_soc_init(void) +{ + /* i.mx50 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH); + mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH); + mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH); + mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH); + mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH); + mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH); } diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index ff557301b42b..665843d6c2b2 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -69,8 +69,6 @@ void __init imx53_init_early(void) mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR)); } -int imx51_register_gpios(void); - void __init mx51_init_irq(void) { unsigned long tzic_addr; @@ -86,11 +84,8 @@ void __init mx51_init_irq(void) panic("unable to map TZIC interrupt controller\n"); tzic_init_irq(tzic_virt); - imx51_register_gpios(); } -int imx53_register_gpios(void); - void __init mx53_init_irq(void) { unsigned long tzic_addr; @@ -103,5 +98,25 @@ void __init mx53_init_irq(void) panic("unable to map TZIC interrupt controller\n"); tzic_init_irq(tzic_virt); - imx53_register_gpios(); +} + +void __init imx51_soc_init(void) +{ + /* i.mx51 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH); + mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH); + mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH); + mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH); +} + +void __init imx53_soc_init(void) +{ + /* i.mx53 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH); + mxc_register_gpio("imx31-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH); + mxc_register_gpio("imx31-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH); + mxc_register_gpio("imx31-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH); + mxc_register_gpio("imx31-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH); + mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH); + mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH); } diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 58e892376bf2..6c38262a3aaa 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,5 +1,5 @@ # Common support -obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o +obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o obj-$(CONFIG_MXS_OCOTP) += ocotp.o obj-$(CONFIG_PM) += pm.o diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c index cfdb6b284702..fe3e847930c9 100644 --- a/arch/arm/mach-mxs/devices.c +++ b/arch/arm/mach-mxs/devices.c @@ -88,3 +88,14 @@ int __init mxs_add_amba_device(const struct amba_device *dev) return amba_device_register(adev, &iomem_resource); } + +struct device mxs_apbh_bus = { + .init_name = "mxs_apbh", + .parent = &platform_bus, +}; + +static int __init mxs_device_init(void) +{ + return device_register(&mxs_apbh_bus); +} +core_initcall(mxs_device_init); diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile index 324f2824d38d..351915c683ff 100644 --- a/arch/arm/mach-mxs/devices/Makefile +++ b/arch/arm/mach-mxs/devices/Makefile @@ -6,4 +6,5 @@ obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o +obj-y += platform-gpio-mxs.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o diff --git a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c new file mode 100644 index 000000000000..ed0885e414e0 --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c @@ -0,0 +1,53 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/compiler.h> +#include <linux/err.h> +#include <linux/init.h> + +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +struct platform_device *__init mxs_add_gpio( + int id, resource_size_t iobase, int irq) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return platform_device_register_resndata(&mxs_apbh_bus, + "gpio-mxs", id, res, ARRAY_SIZE(res), NULL, 0); +} + +static int __init mxs_add_mxs_gpio(void) +{ + if (cpu_is_mx23()) { + mxs_add_gpio(0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0); + mxs_add_gpio(1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1); + mxs_add_gpio(2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2); + } + + if (cpu_is_mx28()) { + mxs_add_gpio(0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0); + mxs_add_gpio(1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1); + mxs_add_gpio(2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2); + mxs_add_gpio(3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3); + mxs_add_gpio(4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4); + } + + return 0; +} +postcore_initcall(mxs_add_mxs_gpio); diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c deleted file mode 100644 index 2c950fef71a8..000000000000 --- a/arch/arm/mach-mxs/gpio.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * Based on code from Freescale, - * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <mach/mx23.h> -#include <mach/mx28.h> -#include <asm-generic/bug.h> - -#include "gpio.h" - -static struct mxs_gpio_port *mxs_gpio_ports; -static int gpio_table_size; - -#define PINCTRL_DOUT(n) ((cpu_is_mx23() ? 0x0500 : 0x0700) + (n) * 0x10) -#define PINCTRL_DIN(n) ((cpu_is_mx23() ? 0x0600 : 0x0900) + (n) * 0x10) -#define PINCTRL_DOE(n) ((cpu_is_mx23() ? 0x0700 : 0x0b00) + (n) * 0x10) -#define PINCTRL_PIN2IRQ(n) ((cpu_is_mx23() ? 0x0800 : 0x1000) + (n) * 0x10) -#define PINCTRL_IRQEN(n) ((cpu_is_mx23() ? 0x0900 : 0x1100) + (n) * 0x10) -#define PINCTRL_IRQLEV(n) ((cpu_is_mx23() ? 0x0a00 : 0x1200) + (n) * 0x10) -#define PINCTRL_IRQPOL(n) ((cpu_is_mx23() ? 0x0b00 : 0x1300) + (n) * 0x10) -#define PINCTRL_IRQSTAT(n) ((cpu_is_mx23() ? 0x0c00 : 0x1400) + (n) * 0x10) - -#define GPIO_INT_FALL_EDGE 0x0 -#define GPIO_INT_LOW_LEV 0x1 -#define GPIO_INT_RISE_EDGE 0x2 -#define GPIO_INT_HIGH_LEV 0x3 -#define GPIO_INT_LEV_MASK (1 << 0) -#define GPIO_INT_POL_MASK (1 << 1) - -/* Note: This driver assumes 32 GPIOs are handled in one register */ - -static void clear_gpio_irqstatus(struct mxs_gpio_port *port, u32 index) -{ - __mxs_clrl(1 << index, port->base + PINCTRL_IRQSTAT(port->id)); -} - -static void set_gpio_irqenable(struct mxs_gpio_port *port, u32 index, - int enable) -{ - if (enable) { - __mxs_setl(1 << index, port->base + PINCTRL_IRQEN(port->id)); - __mxs_setl(1 << index, port->base + PINCTRL_PIN2IRQ(port->id)); - } else { - __mxs_clrl(1 << index, port->base + PINCTRL_IRQEN(port->id)); - } -} - -static void mxs_gpio_ack_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - clear_gpio_irqstatus(&mxs_gpio_ports[gpio / 32], gpio & 0x1f); -} - -static void mxs_gpio_mask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 0); -} - -static void mxs_gpio_unmask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 1); -} - -static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset); - -static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) -{ - u32 gpio = irq_to_gpio(d->irq); - u32 pin_mask = 1 << (gpio & 31); - struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32]; - void __iomem *pin_addr; - int edge; - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - edge = GPIO_INT_RISE_EDGE; - break; - case IRQ_TYPE_EDGE_FALLING: - edge = GPIO_INT_FALL_EDGE; - break; - case IRQ_TYPE_LEVEL_LOW: - edge = GPIO_INT_LOW_LEV; - break; - case IRQ_TYPE_LEVEL_HIGH: - edge = GPIO_INT_HIGH_LEV; - break; - default: - return -EINVAL; - } - - /* set level or edge */ - pin_addr = port->base + PINCTRL_IRQLEV(port->id); - if (edge & GPIO_INT_LEV_MASK) - __mxs_setl(pin_mask, pin_addr); - else - __mxs_clrl(pin_mask, pin_addr); - - /* set polarity */ - pin_addr = port->base + PINCTRL_IRQPOL(port->id); - if (edge & GPIO_INT_POL_MASK) - __mxs_setl(pin_mask, pin_addr); - else - __mxs_clrl(pin_mask, pin_addr); - - clear_gpio_irqstatus(port, gpio & 0x1f); - - return 0; -} - -/* MXS has one interrupt *per* gpio port */ -static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc) -{ - u32 irq_stat; - struct mxs_gpio_port *port = (struct mxs_gpio_port *)irq_get_handler_data(irq); - u32 gpio_irq_no_base = port->virtual_irq_start; - - desc->irq_data.chip->irq_ack(&desc->irq_data); - - irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) & - __raw_readl(port->base + PINCTRL_IRQEN(port->id)); - - while (irq_stat != 0) { - int irqoffset = fls(irq_stat) - 1; - generic_handle_irq(gpio_irq_no_base + irqoffset); - irq_stat &= ~(1 << irqoffset); - } -} - -/* - * Set interrupt number "irq" in the GPIO as a wake-up source. - * While system is running, all registered GPIO interrupts need to have - * wake-up enabled. When system is suspended, only selected GPIO interrupts - * need to have wake-up enabled. - * @param irq interrupt source number - * @param enable enable as wake-up if equal to non-zero - * @return This function returns 0 on success. - */ -static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable) -{ - u32 gpio = irq_to_gpio(d->irq); - u32 gpio_idx = gpio & 0x1f; - struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32]; - - if (enable) { - if (port->irq_high && (gpio_idx >= 16)) - enable_irq_wake(port->irq_high); - else - enable_irq_wake(port->irq); - } else { - if (port->irq_high && (gpio_idx >= 16)) - disable_irq_wake(port->irq_high); - else - disable_irq_wake(port->irq); - } - - return 0; -} - -static struct irq_chip gpio_irq_chip = { - .name = "mxs gpio", - .irq_ack = mxs_gpio_ack_irq, - .irq_mask = mxs_gpio_mask_irq, - .irq_unmask = mxs_gpio_unmask_irq, - .irq_set_type = mxs_gpio_set_irq_type, - .irq_set_wake = mxs_gpio_set_wake_irq, -}; - -static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset, - int dir) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - void __iomem *pin_addr = port->base + PINCTRL_DOE(port->id); - - if (dir) - __mxs_setl(1 << offset, pin_addr); - else - __mxs_clrl(1 << offset, pin_addr); -} - -static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - - return (__raw_readl(port->base + PINCTRL_DIN(port->id)) >> offset) & 1; -} - -static void mxs_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - void __iomem *pin_addr = port->base + PINCTRL_DOUT(port->id); - - if (value) - __mxs_setl(1 << offset, pin_addr); - else - __mxs_clrl(1 << offset, pin_addr); -} - -static int mxs_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - - return port->virtual_irq_start + offset; -} - -static int mxs_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - mxs_set_gpio_direction(chip, offset, 0); - return 0; -} - -static int mxs_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - mxs_gpio_set(chip, offset, value); - mxs_set_gpio_direction(chip, offset, 1); - return 0; -} - -int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt) -{ - int i, j; - - /* save for local usage */ - mxs_gpio_ports = port; - gpio_table_size = cnt; - - pr_info("MXS GPIO hardware\n"); - - for (i = 0; i < cnt; i++) { - /* disable the interrupt and clear the status */ - __raw_writel(0, port[i].base + PINCTRL_PIN2IRQ(i)); - __raw_writel(0, port[i].base + PINCTRL_IRQEN(i)); - - /* clear address has to be used to clear IRQSTAT bits */ - __mxs_clrl(~0U, port[i].base + PINCTRL_IRQSTAT(i)); - - for (j = port[i].virtual_irq_start; - j < port[i].virtual_irq_start + 32; j++) { - irq_set_chip_and_handler(j, &gpio_irq_chip, - handle_level_irq); - set_irq_flags(j, IRQF_VALID); - } - - /* setup one handler for each entry */ - irq_set_chained_handler(port[i].irq, mxs_gpio_irq_handler); - irq_set_handler_data(port[i].irq, &port[i]); - - /* register gpio chip */ - port[i].chip.direction_input = mxs_gpio_direction_input; - port[i].chip.direction_output = mxs_gpio_direction_output; - port[i].chip.get = mxs_gpio_get; - port[i].chip.set = mxs_gpio_set; - port[i].chip.to_irq = mxs_gpio_to_irq; - port[i].chip.base = i * 32; - port[i].chip.ngpio = 32; - - /* its a serious configuration bug when it fails */ - BUG_ON(gpiochip_add(&port[i].chip) < 0); - } - - return 0; -} - -#define MX23_GPIO_BASE MX23_IO_ADDRESS(MX23_PINCTRL_BASE_ADDR) -#define MX28_GPIO_BASE MX28_IO_ADDRESS(MX28_PINCTRL_BASE_ADDR) - -#define DEFINE_MXS_GPIO_PORT(_base, _irq, _id) \ - { \ - .chip.label = "gpio-" #_id, \ - .id = _id, \ - .irq = _irq, \ - .base = _base, \ - .virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32, \ - } - -#ifdef CONFIG_SOC_IMX23 -static struct mxs_gpio_port mx23_gpio_ports[] = { - DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO0, 0), - DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO1, 1), - DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO2, 2), -}; - -int __init mx23_register_gpios(void) -{ - return mxs_gpio_init(mx23_gpio_ports, ARRAY_SIZE(mx23_gpio_ports)); -} -#endif - -#ifdef CONFIG_SOC_IMX28 -static struct mxs_gpio_port mx28_gpio_ports[] = { - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO0, 0), - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO1, 1), - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO2, 2), - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO3, 3), - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO4, 4), -}; - -int __init mx28_register_gpios(void) -{ - return mxs_gpio_init(mx28_gpio_ports, ARRAY_SIZE(mx28_gpio_ports)); -} -#endif diff --git a/arch/arm/mach-mxs/gpio.h b/arch/arm/mach-mxs/gpio.h deleted file mode 100644 index 005bb06630b1..000000000000 --- a/arch/arm/mach-mxs/gpio.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MXS_GPIO_H__ -#define __MXS_GPIO_H__ - -struct mxs_gpio_port { - void __iomem *base; - int id; - int irq; - int irq_high; - int virtual_irq_start; - struct gpio_chip chip; -}; - -int mxs_gpio_init(struct mxs_gpio_port*, int); - -#endif /* __MXS_GPIO_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index 7a37469ed5bf..812d7a813a78 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -11,6 +11,8 @@ #include <linux/init.h> #include <linux/amba/bus.h> +extern struct device mxs_apbh_bus; + struct platform_device *mxs_add_platform_device_dmamask( const char *name, int id, const struct resource *res, unsigned int num_resources, diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index eacdc6b0e70a..56767a5cce0e 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -26,7 +26,6 @@ #include <mach/iomux-mx28.h> #include "devices-mx28.h" -#include "gpio.h" #define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13) #define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15) diff --git a/arch/arm/mach-mxs/mm-mx23.c b/arch/arm/mach-mxs/mm-mx23.c index 5148cd64a6b7..1b2345ac1a87 100644 --- a/arch/arm/mach-mxs/mm-mx23.c +++ b/arch/arm/mach-mxs/mm-mx23.c @@ -41,5 +41,4 @@ void __init mx23_map_io(void) void __init mx23_init_irq(void) { icoll_init_irq(); - mx23_register_gpios(); } diff --git a/arch/arm/mach-mxs/mm-mx28.c b/arch/arm/mach-mxs/mm-mx28.c index 7e4cea32ebc6..b6e18ddb92c0 100644 --- a/arch/arm/mach-mxs/mm-mx28.c +++ b/arch/arm/mach-mxs/mm-mx28.c @@ -41,5 +41,4 @@ void __init mx28_map_io(void) void __init mx28_init_irq(void) { icoll_init_irq(); - mx28_register_gpios(); } diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 364137c2042c..399da4ce017b 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -34,11 +34,22 @@ static struct __initdata resource omap15xx_mpu_gpio_resources[] = { }, }; +static struct omap_gpio_reg_offs omap15xx_mpuio_regs = { + .revision = USHRT_MAX, + .direction = OMAP_MPUIO_IO_CNTL, + .datain = OMAP_MPUIO_INPUT_LATCH, + .dataout = OMAP_MPUIO_OUTPUT, + .irqstatus = OMAP_MPUIO_GPIO_INT, + .irqenable = OMAP_MPUIO_GPIO_MASKIT, + .irqenable_inv = true, +}; + static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, .bank_type = METHOD_MPUIO, .bank_width = 16, .bank_stride = 1, + .regs = &omap15xx_mpuio_regs, }; static struct platform_device omap15xx_mpu_gpio = { @@ -64,10 +75,21 @@ static struct __initdata resource omap15xx_gpio_resources[] = { }, }; +static struct omap_gpio_reg_offs omap15xx_gpio_regs = { + .revision = USHRT_MAX, + .direction = OMAP1510_GPIO_DIR_CONTROL, + .datain = OMAP1510_GPIO_DATA_INPUT, + .dataout = OMAP1510_GPIO_DATA_OUTPUT, + .irqstatus = OMAP1510_GPIO_INT_STATUS, + .irqenable = OMAP1510_GPIO_INT_MASK, + .irqenable_inv = true, +}; + static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = { .virtual_irq_start = IH_GPIO_BASE, .bank_type = METHOD_GPIO_1510, .bank_width = 16, + .regs = &omap15xx_gpio_regs, }; static struct platform_device omap15xx_gpio = { diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 293a246e2824..0f399bd0e70e 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -37,11 +37,22 @@ static struct __initdata resource omap16xx_mpu_gpio_resources[] = { }, }; +static struct omap_gpio_reg_offs omap16xx_mpuio_regs = { + .revision = USHRT_MAX, + .direction = OMAP_MPUIO_IO_CNTL, + .datain = OMAP_MPUIO_INPUT_LATCH, + .dataout = OMAP_MPUIO_OUTPUT, + .irqstatus = OMAP_MPUIO_GPIO_INT, + .irqenable = OMAP_MPUIO_GPIO_MASKIT, + .irqenable_inv = true, +}; + static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, .bank_type = METHOD_MPUIO, .bank_width = 16, .bank_stride = 1, + .regs = &omap16xx_mpuio_regs, }; static struct platform_device omap16xx_mpu_gpio = { @@ -67,10 +78,24 @@ static struct __initdata resource omap16xx_gpio1_resources[] = { }, }; +static struct omap_gpio_reg_offs omap16xx_gpio_regs = { + .revision = OMAP1610_GPIO_REVISION, + .direction = OMAP1610_GPIO_DIRECTION, + .set_dataout = OMAP1610_GPIO_SET_DATAOUT, + .clr_dataout = OMAP1610_GPIO_CLEAR_DATAOUT, + .datain = OMAP1610_GPIO_DATAIN, + .dataout = OMAP1610_GPIO_DATAOUT, + .irqstatus = OMAP1610_GPIO_IRQSTATUS1, + .irqenable = OMAP1610_GPIO_IRQENABLE1, + .set_irqenable = OMAP1610_GPIO_SET_IRQENABLE1, + .clr_irqenable = OMAP1610_GPIO_CLEAR_IRQENABLE1, +}; + static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = { .virtual_irq_start = IH_GPIO_BASE, .bank_type = METHOD_GPIO_1610, .bank_width = 16, + .regs = &omap16xx_gpio_regs, }; static struct platform_device omap16xx_gpio1 = { @@ -100,6 +125,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = { .virtual_irq_start = IH_GPIO_BASE + 16, .bank_type = METHOD_GPIO_1610, .bank_width = 16, + .regs = &omap16xx_gpio_regs, }; static struct platform_device omap16xx_gpio2 = { @@ -129,6 +155,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = { .virtual_irq_start = IH_GPIO_BASE + 32, .bank_type = METHOD_GPIO_1610, .bank_width = 16, + .regs = &omap16xx_gpio_regs, }; static struct platform_device omap16xx_gpio3 = { @@ -158,6 +185,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = { .virtual_irq_start = IH_GPIO_BASE + 48, .bank_type = METHOD_GPIO_1610, .bank_width = 16, + .regs = &omap16xx_gpio_regs, }; static struct platform_device omap16xx_gpio4 = { diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index c6ad248d63a6..5ab63eab0ff5 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -39,11 +39,22 @@ static struct __initdata resource omap7xx_mpu_gpio_resources[] = { }, }; +static struct omap_gpio_reg_offs omap7xx_mpuio_regs = { + .revision = USHRT_MAX, + .direction = OMAP_MPUIO_IO_CNTL / 2, + .datain = OMAP_MPUIO_INPUT_LATCH / 2, + .dataout = OMAP_MPUIO_OUTPUT / 2, + .irqstatus = OMAP_MPUIO_GPIO_INT / 2, + .irqenable = OMAP_MPUIO_GPIO_MASKIT / 2, + .irqenable_inv = true, +}; + static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, .bank_type = METHOD_MPUIO, .bank_width = 32, .bank_stride = 2, + .regs = &omap7xx_mpuio_regs, }; static struct platform_device omap7xx_mpu_gpio = { @@ -69,10 +80,21 @@ static struct __initdata resource omap7xx_gpio1_resources[] = { }, }; +static struct omap_gpio_reg_offs omap7xx_gpio_regs = { + .revision = USHRT_MAX, + .direction = OMAP7XX_GPIO_DIR_CONTROL, + .datain = OMAP7XX_GPIO_DATA_INPUT, + .dataout = OMAP7XX_GPIO_DATA_OUTPUT, + .irqstatus = OMAP7XX_GPIO_INT_STATUS, + .irqenable = OMAP7XX_GPIO_INT_MASK, + .irqenable_inv = true, +}; + static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = { .virtual_irq_start = IH_GPIO_BASE, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; static struct platform_device omap7xx_gpio1 = { @@ -102,6 +124,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = { .virtual_irq_start = IH_GPIO_BASE + 32, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; static struct platform_device omap7xx_gpio2 = { @@ -131,6 +154,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = { .virtual_irq_start = IH_GPIO_BASE + 64, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; static struct platform_device omap7xx_gpio3 = { @@ -160,6 +184,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = { .virtual_irq_start = IH_GPIO_BASE + 96, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; static struct platform_device omap7xx_gpio4 = { @@ -189,6 +214,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = { .virtual_irq_start = IH_GPIO_BASE + 128, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; static struct platform_device omap7xx_gpio5 = { @@ -218,6 +244,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = { .virtual_irq_start = IH_GPIO_BASE + 160, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; static struct platform_device omap7xx_gpio6 = { diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 9529842ae054..9a46d7773a48 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -61,13 +61,45 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) pdata->dbck_flag = dev_attr->dbck_flag; pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1); + pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL); + if (!pdata) { + pr_err("gpio%d: Memory allocation failed\n", id); + return -ENOMEM; + } + switch (oh->class->rev) { case 0: case 1: pdata->bank_type = METHOD_GPIO_24XX; + pdata->regs->revision = OMAP24XX_GPIO_REVISION; + pdata->regs->direction = OMAP24XX_GPIO_OE; + pdata->regs->datain = OMAP24XX_GPIO_DATAIN; + pdata->regs->dataout = OMAP24XX_GPIO_DATAOUT; + pdata->regs->set_dataout = OMAP24XX_GPIO_SETDATAOUT; + pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT; + pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1; + pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2; + pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1; + pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1; + pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1; + pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL; + pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN; break; case 2: pdata->bank_type = METHOD_GPIO_44XX; + pdata->regs->revision = OMAP4_GPIO_REVISION; + pdata->regs->direction = OMAP4_GPIO_OE; + pdata->regs->datain = OMAP4_GPIO_DATAIN; + pdata->regs->dataout = OMAP4_GPIO_DATAOUT; + pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT; + pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT; + pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0; + pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1; + pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0; + pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0; + pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0; + pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME; + pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE; break; default: WARN(1, "Invalid gpio bank_type\n"); diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 823c703e573c..ed58ef9019b5 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -4,7 +4,6 @@ obj-y += io.o obj-y += irq.o obj-y += clock.o obj-y += timer.o -obj-y += gpio.o obj-y += pinmux.o obj-y += powergate.o obj-y += fuse.o diff --git a/arch/arm/mach-tegra/gpio.c b/arch/arm/mach-tegra/gpio.c deleted file mode 100644 index 919d63837736..000000000000 --- a/arch/arm/mach-tegra/gpio.c +++ /dev/null @@ -1,431 +0,0 @@ -/* - * arch/arm/mach-tegra/gpio.c - * - * Copyright (c) 2010 Google, Inc - * - * Author: - * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/interrupt.h> - -#include <linux/io.h> -#include <linux/gpio.h> - -#include <asm/mach/irq.h> - -#include <mach/iomap.h> -#include <mach/suspend.h> - -#define GPIO_BANK(x) ((x) >> 5) -#define GPIO_PORT(x) (((x) >> 3) & 0x3) -#define GPIO_BIT(x) ((x) & 0x7) - -#define GPIO_REG(x) (IO_TO_VIRT(TEGRA_GPIO_BASE) + \ - GPIO_BANK(x) * 0x80 + \ - GPIO_PORT(x) * 4) - -#define GPIO_CNF(x) (GPIO_REG(x) + 0x00) -#define GPIO_OE(x) (GPIO_REG(x) + 0x10) -#define GPIO_OUT(x) (GPIO_REG(x) + 0X20) -#define GPIO_IN(x) (GPIO_REG(x) + 0x30) -#define GPIO_INT_STA(x) (GPIO_REG(x) + 0x40) -#define GPIO_INT_ENB(x) (GPIO_REG(x) + 0x50) -#define GPIO_INT_LVL(x) (GPIO_REG(x) + 0x60) -#define GPIO_INT_CLR(x) (GPIO_REG(x) + 0x70) - -#define GPIO_MSK_CNF(x) (GPIO_REG(x) + 0x800) -#define GPIO_MSK_OE(x) (GPIO_REG(x) + 0x810) -#define GPIO_MSK_OUT(x) (GPIO_REG(x) + 0X820) -#define GPIO_MSK_INT_STA(x) (GPIO_REG(x) + 0x840) -#define GPIO_MSK_INT_ENB(x) (GPIO_REG(x) + 0x850) -#define GPIO_MSK_INT_LVL(x) (GPIO_REG(x) + 0x860) - -#define GPIO_INT_LVL_MASK 0x010101 -#define GPIO_INT_LVL_EDGE_RISING 0x000101 -#define GPIO_INT_LVL_EDGE_FALLING 0x000100 -#define GPIO_INT_LVL_EDGE_BOTH 0x010100 -#define GPIO_INT_LVL_LEVEL_HIGH 0x000001 -#define GPIO_INT_LVL_LEVEL_LOW 0x000000 - -struct tegra_gpio_bank { - int bank; - int irq; - spinlock_t lvl_lock[4]; -#ifdef CONFIG_PM - u32 cnf[4]; - u32 out[4]; - u32 oe[4]; - u32 int_enb[4]; - u32 int_lvl[4]; -#endif -}; - - -static struct tegra_gpio_bank tegra_gpio_banks[] = { - {.bank = 0, .irq = INT_GPIO1}, - {.bank = 1, .irq = INT_GPIO2}, - {.bank = 2, .irq = INT_GPIO3}, - {.bank = 3, .irq = INT_GPIO4}, - {.bank = 4, .irq = INT_GPIO5}, - {.bank = 5, .irq = INT_GPIO6}, - {.bank = 6, .irq = INT_GPIO7}, -}; - -static int tegra_gpio_compose(int bank, int port, int bit) -{ - return (bank << 5) | ((port & 0x3) << 3) | (bit & 0x7); -} - -static void tegra_gpio_mask_write(u32 reg, int gpio, int value) -{ - u32 val; - - val = 0x100 << GPIO_BIT(gpio); - if (value) - val |= 1 << GPIO_BIT(gpio); - __raw_writel(val, reg); -} - -void tegra_gpio_enable(int gpio) -{ - tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 1); -} - -void tegra_gpio_disable(int gpio) -{ - tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 0); -} - -static void tegra_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - tegra_gpio_mask_write(GPIO_MSK_OUT(offset), offset, value); -} - -static int tegra_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - return (__raw_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1; -} - -static int tegra_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 0); - return 0; -} - -static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset, - int value) -{ - tegra_gpio_set(chip, offset, value); - tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 1); - return 0; -} - - - -static struct gpio_chip tegra_gpio_chip = { - .label = "tegra-gpio", - .direction_input = tegra_gpio_direction_input, - .get = tegra_gpio_get, - .direction_output = tegra_gpio_direction_output, - .set = tegra_gpio_set, - .base = 0, - .ngpio = TEGRA_NR_GPIOS, -}; - -static void tegra_gpio_irq_ack(struct irq_data *d) -{ - int gpio = d->irq - INT_GPIO_BASE; - - __raw_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio)); -} - -static void tegra_gpio_irq_mask(struct irq_data *d) -{ - int gpio = d->irq - INT_GPIO_BASE; - - tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 0); -} - -static void tegra_gpio_irq_unmask(struct irq_data *d) -{ - int gpio = d->irq - INT_GPIO_BASE; - - tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 1); -} - -static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type) -{ - int gpio = d->irq - INT_GPIO_BASE; - struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); - int port = GPIO_PORT(gpio); - int lvl_type; - int val; - unsigned long flags; - - switch (type & IRQ_TYPE_SENSE_MASK) { - case IRQ_TYPE_EDGE_RISING: - lvl_type = GPIO_INT_LVL_EDGE_RISING; - break; - - case IRQ_TYPE_EDGE_FALLING: - lvl_type = GPIO_INT_LVL_EDGE_FALLING; - break; - - case IRQ_TYPE_EDGE_BOTH: - lvl_type = GPIO_INT_LVL_EDGE_BOTH; - break; - - case IRQ_TYPE_LEVEL_HIGH: - lvl_type = GPIO_INT_LVL_LEVEL_HIGH; - break; - - case IRQ_TYPE_LEVEL_LOW: - lvl_type = GPIO_INT_LVL_LEVEL_LOW; - break; - - default: - return -EINVAL; - } - - spin_lock_irqsave(&bank->lvl_lock[port], flags); - - val = __raw_readl(GPIO_INT_LVL(gpio)); - val &= ~(GPIO_INT_LVL_MASK << GPIO_BIT(gpio)); - val |= lvl_type << GPIO_BIT(gpio); - __raw_writel(val, GPIO_INT_LVL(gpio)); - - spin_unlock_irqrestore(&bank->lvl_lock[port], flags); - - if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) - __irq_set_handler_locked(d->irq, handle_level_irq); - else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) - __irq_set_handler_locked(d->irq, handle_edge_irq); - - return 0; -} - -static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - struct tegra_gpio_bank *bank; - int port; - int pin; - int unmasked = 0; - struct irq_chip *chip = irq_desc_get_chip(desc); - - chained_irq_enter(chip, desc); - - bank = irq_get_handler_data(irq); - - for (port = 0; port < 4; port++) { - int gpio = tegra_gpio_compose(bank->bank, port, 0); - unsigned long sta = __raw_readl(GPIO_INT_STA(gpio)) & - __raw_readl(GPIO_INT_ENB(gpio)); - u32 lvl = __raw_readl(GPIO_INT_LVL(gpio)); - - for_each_set_bit(pin, &sta, 8) { - __raw_writel(1 << pin, GPIO_INT_CLR(gpio)); - - /* if gpio is edge triggered, clear condition - * before executing the hander so that we don't - * miss edges - */ - if (lvl & (0x100 << pin)) { - unmasked = 1; - chained_irq_exit(chip, desc); - } - - generic_handle_irq(gpio_to_irq(gpio + pin)); - } - } - - if (!unmasked) - chained_irq_exit(chip, desc); - -} - -#ifdef CONFIG_PM -void tegra_gpio_resume(void) -{ - unsigned long flags; - int b; - int p; - - local_irq_save(flags); - - for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) { - struct tegra_gpio_bank *bank = &tegra_gpio_banks[b]; - - for (p = 0; p < ARRAY_SIZE(bank->oe); p++) { - unsigned int gpio = (b<<5) | (p<<3); - __raw_writel(bank->cnf[p], GPIO_CNF(gpio)); - __raw_writel(bank->out[p], GPIO_OUT(gpio)); - __raw_writel(bank->oe[p], GPIO_OE(gpio)); - __raw_writel(bank->int_lvl[p], GPIO_INT_LVL(gpio)); - __raw_writel(bank->int_enb[p], GPIO_INT_ENB(gpio)); - } - } - - local_irq_restore(flags); -} - -void tegra_gpio_suspend(void) -{ - unsigned long flags; - int b; - int p; - - local_irq_save(flags); - for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) { - struct tegra_gpio_bank *bank = &tegra_gpio_banks[b]; - - for (p = 0; p < ARRAY_SIZE(bank->oe); p++) { - unsigned int gpio = (b<<5) | (p<<3); - bank->cnf[p] = __raw_readl(GPIO_CNF(gpio)); - bank->out[p] = __raw_readl(GPIO_OUT(gpio)); - bank->oe[p] = __raw_readl(GPIO_OE(gpio)); - bank->int_enb[p] = __raw_readl(GPIO_INT_ENB(gpio)); - bank->int_lvl[p] = __raw_readl(GPIO_INT_LVL(gpio)); - } - } - local_irq_restore(flags); -} - -static int tegra_gpio_wake_enable(struct irq_data *d, unsigned int enable) -{ - struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); - return irq_set_irq_wake(bank->irq, enable); -} -#endif - -static struct irq_chip tegra_gpio_irq_chip = { - .name = "GPIO", - .irq_ack = tegra_gpio_irq_ack, - .irq_mask = tegra_gpio_irq_mask, - .irq_unmask = tegra_gpio_irq_unmask, - .irq_set_type = tegra_gpio_irq_set_type, -#ifdef CONFIG_PM - .irq_set_wake = tegra_gpio_wake_enable, -#endif -}; - - -/* This lock class tells lockdep that GPIO irqs are in a different - * category than their parents, so it won't report false recursion. - */ -static struct lock_class_key gpio_lock_class; - -static int __init tegra_gpio_init(void) -{ - struct tegra_gpio_bank *bank; - int i; - int j; - - for (i = 0; i < 7; i++) { - for (j = 0; j < 4; j++) { - int gpio = tegra_gpio_compose(i, j, 0); - __raw_writel(0x00, GPIO_INT_ENB(gpio)); - } - } - - gpiochip_add(&tegra_gpio_chip); - - for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) { - bank = &tegra_gpio_banks[GPIO_BANK(irq_to_gpio(i))]; - - irq_set_lockdep_class(i, &gpio_lock_class); - irq_set_chip_data(i, bank); - irq_set_chip_and_handler(i, &tegra_gpio_irq_chip, - handle_simple_irq); - set_irq_flags(i, IRQF_VALID); - } - - for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) { - bank = &tegra_gpio_banks[i]; - - irq_set_chained_handler(bank->irq, tegra_gpio_irq_handler); - irq_set_handler_data(bank->irq, bank); - - for (j = 0; j < 4; j++) - spin_lock_init(&bank->lvl_lock[j]); - } - - return 0; -} - -postcore_initcall(tegra_gpio_init); - -void __init tegra_gpio_config(struct tegra_gpio_table *table, int num) -{ - int i; - - for (i = 0; i < num; i++) { - int gpio = table[i].gpio; - - if (table[i].enable) - tegra_gpio_enable(gpio); - else - tegra_gpio_disable(gpio); - } -} - -#ifdef CONFIG_DEBUG_FS - -#include <linux/debugfs.h> -#include <linux/seq_file.h> - -static int dbg_gpio_show(struct seq_file *s, void *unused) -{ - int i; - int j; - - for (i = 0; i < 7; i++) { - for (j = 0; j < 4; j++) { - int gpio = tegra_gpio_compose(i, j, 0); - seq_printf(s, - "%d:%d %02x %02x %02x %02x %02x %02x %06x\n", - i, j, - __raw_readl(GPIO_CNF(gpio)), - __raw_readl(GPIO_OE(gpio)), - __raw_readl(GPIO_OUT(gpio)), - __raw_readl(GPIO_IN(gpio)), - __raw_readl(GPIO_INT_STA(gpio)), - __raw_readl(GPIO_INT_ENB(gpio)), - __raw_readl(GPIO_INT_LVL(gpio))); - } - } - return 0; -} - -static int dbg_gpio_open(struct inode *inode, struct file *file) -{ - return single_open(file, dbg_gpio_show, &inode->i_private); -} - -static const struct file_operations debug_fops = { - .open = dbg_gpio_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init tegra_gpio_debuginit(void) -{ - (void) debugfs_create_file("tegra_gpio", S_IRUGO, - NULL, NULL, &debug_fops); - return 0; -} -late_initcall(tegra_gpio_debuginit); -#endif diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index a1387875a491..d53c35fe2ea7 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := clock.o gpio.o time.o devices.o cpu.o system.o irq-common.o +obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o # MX51 uses the TZIC interrupt controller, older platforms use AVIC obj-$(CONFIG_MXC_TZIC) += tzic.o diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c index eee1b6096a08..fb166b20f60f 100644 --- a/arch/arm/plat-mxc/devices.c +++ b/arch/arm/plat-mxc/devices.c @@ -89,3 +89,14 @@ err: return pdev; } + +struct device mxc_aips_bus = { + .init_name = "mxc_aips", + .parent = &platform_bus, +}; + +static int __init mxc_device_init(void) +{ + return device_register(&mxc_aips_bus); +} +core_initcall(mxc_device_init); diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile index ad2922acf480..b41bf972b54b 100644 --- a/arch/arm/plat-mxc/devices/Makefile +++ b/arch/arm/plat-mxc/devices/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o +obj-y += platform-gpio-mxc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o diff --git a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c new file mode 100644 index 000000000000..a7919a241032 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c @@ -0,0 +1,32 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2011 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/devices-common.h> + +struct platform_device *__init mxc_register_gpio(char *name, int id, + resource_size_t iobase, resource_size_t iosize, int irq, int irq_high) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, { + .start = irq_high, + .end = irq_high, + .flags = IORESOURCE_IRQ, + }, + }; + + return platform_device_register_resndata(&mxc_aips_bus, + name, id, res, ARRAY_SIZE(res), NULL, 0); +} diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c deleted file mode 100644 index 6cd6d7f686f6..000000000000 --- a/arch/arm/plat-mxc/gpio.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * Based on code from Freescale, - * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <mach/hardware.h> -#include <asm-generic/bug.h> - -static struct mxc_gpio_port *mxc_gpio_ports; -static int gpio_table_size; - -#define cpu_is_mx1_mx2() (cpu_is_mx1() || cpu_is_mx2()) - -#define GPIO_DR (cpu_is_mx1_mx2() ? 0x1c : 0x00) -#define GPIO_GDIR (cpu_is_mx1_mx2() ? 0x00 : 0x04) -#define GPIO_PSR (cpu_is_mx1_mx2() ? 0x24 : 0x08) -#define GPIO_ICR1 (cpu_is_mx1_mx2() ? 0x28 : 0x0C) -#define GPIO_ICR2 (cpu_is_mx1_mx2() ? 0x2C : 0x10) -#define GPIO_IMR (cpu_is_mx1_mx2() ? 0x30 : 0x14) -#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18) - -#define GPIO_INT_LOW_LEV (cpu_is_mx1_mx2() ? 0x3 : 0x0) -#define GPIO_INT_HIGH_LEV (cpu_is_mx1_mx2() ? 0x2 : 0x1) -#define GPIO_INT_RISE_EDGE (cpu_is_mx1_mx2() ? 0x0 : 0x2) -#define GPIO_INT_FALL_EDGE (cpu_is_mx1_mx2() ? 0x1 : 0x3) -#define GPIO_INT_NONE 0x4 - -/* Note: This driver assumes 32 GPIOs are handled in one register */ - -static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index) -{ - __raw_writel(1 << index, port->base + GPIO_ISR); -} - -static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index, - int enable) -{ - u32 l; - - l = __raw_readl(port->base + GPIO_IMR); - l = (l & (~(1 << index))) | (!!enable << index); - __raw_writel(l, port->base + GPIO_IMR); -} - -static void gpio_ack_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - _clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f); -} - -static void gpio_mask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0); -} - -static void gpio_unmask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1); -} - -static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset); - -static int gpio_set_irq_type(struct irq_data *d, u32 type) -{ - u32 gpio = irq_to_gpio(d->irq); - struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32]; - u32 bit, val; - int edge; - void __iomem *reg = port->base; - - port->both_edges &= ~(1 << (gpio & 31)); - switch (type) { - case IRQ_TYPE_EDGE_RISING: - edge = GPIO_INT_RISE_EDGE; - break; - case IRQ_TYPE_EDGE_FALLING: - edge = GPIO_INT_FALL_EDGE; - break; - case IRQ_TYPE_EDGE_BOTH: - val = mxc_gpio_get(&port->chip, gpio & 31); - if (val) { - edge = GPIO_INT_LOW_LEV; - pr_debug("mxc: set GPIO %d to low trigger\n", gpio); - } else { - edge = GPIO_INT_HIGH_LEV; - pr_debug("mxc: set GPIO %d to high trigger\n", gpio); - } - port->both_edges |= 1 << (gpio & 31); - break; - case IRQ_TYPE_LEVEL_LOW: - edge = GPIO_INT_LOW_LEV; - break; - case IRQ_TYPE_LEVEL_HIGH: - edge = GPIO_INT_HIGH_LEV; - break; - default: - return -EINVAL; - } - - reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ - bit = gpio & 0xf; - val = __raw_readl(reg) & ~(0x3 << (bit << 1)); - __raw_writel(val | (edge << (bit << 1)), reg); - _clear_gpio_irqstatus(port, gpio & 0x1f); - - return 0; -} - -static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) -{ - void __iomem *reg = port->base; - u32 bit, val; - int edge; - - reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ - bit = gpio & 0xf; - val = __raw_readl(reg); - edge = (val >> (bit << 1)) & 3; - val &= ~(0x3 << (bit << 1)); - if (edge == GPIO_INT_HIGH_LEV) { - edge = GPIO_INT_LOW_LEV; - pr_debug("mxc: switch GPIO %d to low trigger\n", gpio); - } else if (edge == GPIO_INT_LOW_LEV) { - edge = GPIO_INT_HIGH_LEV; - pr_debug("mxc: switch GPIO %d to high trigger\n", gpio); - } else { - pr_err("mxc: invalid configuration for GPIO %d: %x\n", - gpio, edge); - return; - } - __raw_writel(val | (edge << (bit << 1)), reg); -} - -/* handle 32 interrupts in one status register */ -static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) -{ - u32 gpio_irq_no_base = port->virtual_irq_start; - - while (irq_stat != 0) { - int irqoffset = fls(irq_stat) - 1; - - if (port->both_edges & (1 << irqoffset)) - mxc_flip_edge(port, irqoffset); - - generic_handle_irq(gpio_irq_no_base + irqoffset); - - irq_stat &= ~(1 << irqoffset); - } -} - -/* MX1 and MX3 has one interrupt *per* gpio port */ -static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) -{ - u32 irq_stat; - struct mxc_gpio_port *port = irq_get_handler_data(irq); - - irq_stat = __raw_readl(port->base + GPIO_ISR) & - __raw_readl(port->base + GPIO_IMR); - - mxc_gpio_irq_handler(port, irq_stat); -} - -/* MX2 has one interrupt *for all* gpio ports */ -static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc) -{ - int i; - u32 irq_msk, irq_stat; - struct mxc_gpio_port *port = irq_get_handler_data(irq); - - /* walk through all interrupt status registers */ - for (i = 0; i < gpio_table_size; i++) { - irq_msk = __raw_readl(port[i].base + GPIO_IMR); - if (!irq_msk) - continue; - - irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk; - if (irq_stat) - mxc_gpio_irq_handler(&port[i], irq_stat); - } -} - -/* - * Set interrupt number "irq" in the GPIO as a wake-up source. - * While system is running, all registered GPIO interrupts need to have - * wake-up enabled. When system is suspended, only selected GPIO interrupts - * need to have wake-up enabled. - * @param irq interrupt source number - * @param enable enable as wake-up if equal to non-zero - * @return This function returns 0 on success. - */ -static int gpio_set_wake_irq(struct irq_data *d, u32 enable) -{ - u32 gpio = irq_to_gpio(d->irq); - u32 gpio_idx = gpio & 0x1F; - struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32]; - - if (enable) { - if (port->irq_high && (gpio_idx >= 16)) - enable_irq_wake(port->irq_high); - else - enable_irq_wake(port->irq); - } else { - if (port->irq_high && (gpio_idx >= 16)) - disable_irq_wake(port->irq_high); - else - disable_irq_wake(port->irq); - } - - return 0; -} - -static struct irq_chip gpio_irq_chip = { - .name = "GPIO", - .irq_ack = gpio_ack_irq, - .irq_mask = gpio_mask_irq, - .irq_unmask = gpio_unmask_irq, - .irq_set_type = gpio_set_irq_type, - .irq_set_wake = gpio_set_wake_irq, -}; - -static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, - int dir) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - u32 l; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - l = __raw_readl(port->base + GPIO_GDIR); - if (dir) - l |= 1 << offset; - else - l &= ~(1 << offset); - __raw_writel(l, port->base + GPIO_GDIR); - spin_unlock_irqrestore(&port->lock, flags); -} - -static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - void __iomem *reg = port->base + GPIO_DR; - u32 l; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - l = (__raw_readl(reg) & (~(1 << offset))) | (!!value << offset); - __raw_writel(l, reg); - spin_unlock_irqrestore(&port->lock, flags); -} - -static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - - return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1; -} - -static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - _set_gpio_direction(chip, offset, 0); - return 0; -} - -static int mxc_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - mxc_gpio_set(chip, offset, value); - _set_gpio_direction(chip, offset, 1); - return 0; -} - -/* - * This lock class tells lockdep that GPIO irqs are in a different - * category than their parents, so it won't report false recursion. - */ -static struct lock_class_key gpio_lock_class; - -int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) -{ - int i, j; - - /* save for local usage */ - mxc_gpio_ports = port; - gpio_table_size = cnt; - - printk(KERN_INFO "MXC GPIO hardware\n"); - - for (i = 0; i < cnt; i++) { - /* disable the interrupt and clear the status */ - __raw_writel(0, port[i].base + GPIO_IMR); - __raw_writel(~0, port[i].base + GPIO_ISR); - for (j = port[i].virtual_irq_start; - j < port[i].virtual_irq_start + 32; j++) { - irq_set_lockdep_class(j, &gpio_lock_class); - irq_set_chip_and_handler(j, &gpio_irq_chip, - handle_level_irq); - set_irq_flags(j, IRQF_VALID); - } - - /* register gpio chip */ - port[i].chip.direction_input = mxc_gpio_direction_input; - port[i].chip.direction_output = mxc_gpio_direction_output; - port[i].chip.get = mxc_gpio_get; - port[i].chip.set = mxc_gpio_set; - port[i].chip.base = i * 32; - port[i].chip.ngpio = 32; - - spin_lock_init(&port[i].lock); - - /* its a serious configuration bug when it fails */ - BUG_ON( gpiochip_add(&port[i].chip) < 0 ); - - if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) { - /* setup one handler for each entry */ - irq_set_chained_handler(port[i].irq, - mx3_gpio_irq_handler); - irq_set_handler_data(port[i].irq, &port[i]); - if (port[i].irq_high) { - /* setup handler for GPIO 16 to 31 */ - irq_set_chained_handler(port[i].irq_high, - mx3_gpio_irq_handler); - irq_set_handler_data(port[i].irq_high, - &port[i]); - } - } - } - - if (cpu_is_mx2()) { - /* setup one handler for all GPIO interrupts */ - irq_set_chained_handler(port[0].irq, mx2_gpio_irq_handler); - irq_set_handler_data(port[0].irq, port); - } - - return 0; -} diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index da7991832af6..4e3d97890d69 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -43,6 +43,15 @@ extern void mx35_init_irq(void); extern void mx50_init_irq(void); extern void mx51_init_irq(void); extern void mx53_init_irq(void); +extern void imx1_soc_init(void); +extern void imx21_soc_init(void); +extern void imx25_soc_init(void); +extern void imx27_soc_init(void); +extern void imx31_soc_init(void); +extern void imx35_soc_init(void); +extern void imx50_soc_init(void); +extern void imx51_soc_init(void); +extern void imx53_soc_init(void); extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); @@ -55,7 +64,8 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); -extern int mxc_register_gpios(void); +extern struct platform_device *mxc_register_gpio(char *name, int id, + resource_size_t iobase, resource_size_t iosize, int irq, int irq_high); extern int mxc_register_device(struct platform_device *pdev, void *data); extern void mxc_set_cpu_type(unsigned int type); extern void mxc_arch_reset_init(void __iomem *); diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index fa8477337f91..03f626645374 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -10,6 +10,8 @@ #include <linux/platform_device.h> #include <linux/init.h> +extern struct device mxc_aips_bus; + struct platform_device *imx_add_platform_device_dmamask( const char *name, int id, const struct resource *res, unsigned int num_resources, diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h index a2747f12813e..31c820c1b796 100644 --- a/arch/arm/plat-mxc/include/mach/gpio.h +++ b/arch/arm/plat-mxc/include/mach/gpio.h @@ -36,31 +36,4 @@ #define gpio_to_irq(gpio) (MXC_GPIO_IRQ_START + (gpio)) #define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START) -struct mxc_gpio_port { - void __iomem *base; - int irq; - int irq_high; - int virtual_irq_start; - struct gpio_chip chip; - u32 both_edges; - spinlock_t lock; -}; - -#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high) \ - { \ - .chip.label = "gpio-" #_id, \ - .irq = _irq, \ - .irq_high = _irq_high, \ - .base = soc ## _IO_ADDRESS( \ - soc ## _GPIO ## _hwid ## _BASE_ADDR), \ - .virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32, \ - } - -#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq) \ - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0) -#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid) \ - DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0) - -int mxc_gpio_init(struct mxc_gpio_port*, int); - #endif diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index 35c89bcdf758..00e812bbd81d 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -11,6 +11,8 @@ #ifndef __ASM_ARCH_MXC_IRQS_H__ #define __ASM_ARCH_MXC_IRQS_H__ +#include <asm-generic/gpio.h> + /* * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64 */ @@ -22,30 +24,13 @@ #define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS -/* these are ordered by size to support multi-SoC kernels */ -#if defined CONFIG_SOC_IMX53 -#define MXC_GPIO_IRQS (32 * 7) -#elif defined CONFIG_ARCH_MX2 -#define MXC_GPIO_IRQS (32 * 6) -#elif defined CONFIG_SOC_IMX50 -#define MXC_GPIO_IRQS (32 * 6) -#elif defined CONFIG_ARCH_MX1 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_ARCH_MX25 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_SOC_IMX51 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_ARCH_MX3 -#define MXC_GPIO_IRQS (32 * 3) -#endif - /* * The next 16 interrupts are for board specific purposes. Since * the kernel can only run on one machine at a time, we can re-use * these. If you need more, increase MXC_BOARD_IRQS, but keep it * within sensible limits. */ -#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS) +#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + ARCH_NR_GPIOS) #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 #define MXC_BOARD_IRQS 80 diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index ec97e00cb581..91e8de3db085 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -174,12 +174,32 @@ struct omap_gpio_dev_attr { bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ }; +struct omap_gpio_reg_offs { + u16 revision; + u16 direction; + u16 datain; + u16 dataout; + u16 set_dataout; + u16 clr_dataout; + u16 irqstatus; + u16 irqstatus2; + u16 irqenable; + u16 set_irqenable; + u16 clr_irqenable; + u16 debounce; + u16 debounce_en; + + bool irqenable_inv; +}; + struct omap_gpio_platform_data { u16 virtual_irq_start; int bank_type; int bank_width; /* GPIO bank width */ int bank_stride; /* Only needed for omap1 MPUIO */ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ + + struct omap_gpio_reg_offs *regs; }; /* TODO: Analyze removing gpio_bank_count usage from driver code */ diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig index 47ea1be1481b..90f4496017e4 100644 --- a/arch/powerpc/platforms/52xx/Kconfig +++ b/arch/powerpc/platforms/52xx/Kconfig @@ -55,14 +55,6 @@ config PPC_MPC5200_BUGFIX It is safe to say 'Y' here -config PPC_MPC5200_GPIO - bool "MPC5200 GPIO support" - depends on PPC_MPC52xx - select ARCH_REQUIRE_GPIOLIB - select GENERIC_GPIO - help - Enable gpiolib support for mpc5200 based boards - config PPC_MPC5200_LPBFIFO tristate "MPC5200 LocalPlus bus FIFO driver" depends on PPC_MPC52xx diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile index 2bc8cd0c5cfc..4e62486791e9 100644 --- a/arch/powerpc/platforms/52xx/Makefile +++ b/arch/powerpc/platforms/52xx/Makefile @@ -14,5 +14,4 @@ ifeq ($(CONFIG_PPC_LITE5200),y) obj-$(CONFIG_PM) += lite5200_sleep.o lite5200_pm.o endif -obj-$(CONFIG_PPC_MPC5200_GPIO) += mpc52xx_gpio.o obj-$(CONFIG_PPC_MPC5200_LPBFIFO) += mpc52xx_lpbfifo.o diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c deleted file mode 100644 index 1757d1db4b51..000000000000 --- a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c +++ /dev/null @@ -1,380 +0,0 @@ -/* - * MPC52xx gpio driver - * - * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/of.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/of_gpio.h> -#include <linux/io.h> -#include <linux/of_platform.h> - -#include <asm/gpio.h> -#include <asm/mpc52xx.h> -#include <sysdev/fsl_soc.h> - -static DEFINE_SPINLOCK(gpio_lock); - -struct mpc52xx_gpiochip { - struct of_mm_gpio_chip mmchip; - unsigned int shadow_dvo; - unsigned int shadow_gpioe; - unsigned int shadow_ddr; -}; - -/* - * GPIO LIB API implementation for wakeup GPIOs. - * - * There's a maximum of 8 wakeup GPIOs. Which of these are available - * for use depends on your board setup. - * - * 0 -> GPIO_WKUP_7 - * 1 -> GPIO_WKUP_6 - * 2 -> PSC6_1 - * 3 -> PSC6_0 - * 4 -> ETH_17 - * 5 -> PSC3_9 - * 6 -> PSC2_4 - * 7 -> PSC1_4 - * - */ -static int mpc52xx_wkup_gpio_get(struct gpio_chip *gc, unsigned int gpio) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; - unsigned int ret; - - ret = (in_8(®s->wkup_ival) >> (7 - gpio)) & 1; - - pr_debug("%s: gpio: %d ret: %d\n", __func__, gpio, ret); - - return ret; -} - -static inline void -__mpc52xx_wkup_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpiochip *chip = container_of(mm_gc, - struct mpc52xx_gpiochip, mmchip); - struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; - - if (val) - chip->shadow_dvo |= 1 << (7 - gpio); - else - chip->shadow_dvo &= ~(1 << (7 - gpio)); - - out_8(®s->wkup_dvo, chip->shadow_dvo); -} - -static void -mpc52xx_wkup_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) -{ - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - - __mpc52xx_wkup_gpio_set(gc, gpio, val); - - spin_unlock_irqrestore(&gpio_lock, flags); - - pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); -} - -static int mpc52xx_wkup_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpiochip *chip = container_of(mm_gc, - struct mpc52xx_gpiochip, mmchip); - struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - - /* set the direction */ - chip->shadow_ddr &= ~(1 << (7 - gpio)); - out_8(®s->wkup_ddr, chip->shadow_ddr); - - /* and enable the pin */ - chip->shadow_gpioe |= 1 << (7 - gpio); - out_8(®s->wkup_gpioe, chip->shadow_gpioe); - - spin_unlock_irqrestore(&gpio_lock, flags); - - return 0; -} - -static int -mpc52xx_wkup_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; - struct mpc52xx_gpiochip *chip = container_of(mm_gc, - struct mpc52xx_gpiochip, mmchip); - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - - __mpc52xx_wkup_gpio_set(gc, gpio, val); - - /* Then set direction */ - chip->shadow_ddr |= 1 << (7 - gpio); - out_8(®s->wkup_ddr, chip->shadow_ddr); - - /* Finally enable the pin */ - chip->shadow_gpioe |= 1 << (7 - gpio); - out_8(®s->wkup_gpioe, chip->shadow_gpioe); - - spin_unlock_irqrestore(&gpio_lock, flags); - - pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); - - return 0; -} - -static int __devinit mpc52xx_wkup_gpiochip_probe(struct platform_device *ofdev) -{ - struct mpc52xx_gpiochip *chip; - struct mpc52xx_gpio_wkup __iomem *regs; - struct gpio_chip *gc; - int ret; - - chip = kzalloc(sizeof(*chip), GFP_KERNEL); - if (!chip) - return -ENOMEM; - - gc = &chip->mmchip.gc; - - gc->ngpio = 8; - gc->direction_input = mpc52xx_wkup_gpio_dir_in; - gc->direction_output = mpc52xx_wkup_gpio_dir_out; - gc->get = mpc52xx_wkup_gpio_get; - gc->set = mpc52xx_wkup_gpio_set; - - ret = of_mm_gpiochip_add(ofdev->dev.of_node, &chip->mmchip); - if (ret) - return ret; - - regs = chip->mmchip.regs; - chip->shadow_gpioe = in_8(®s->wkup_gpioe); - chip->shadow_ddr = in_8(®s->wkup_ddr); - chip->shadow_dvo = in_8(®s->wkup_dvo); - - return 0; -} - -static int mpc52xx_gpiochip_remove(struct platform_device *ofdev) -{ - return -EBUSY; -} - -static const struct of_device_id mpc52xx_wkup_gpiochip_match[] = { - { - .compatible = "fsl,mpc5200-gpio-wkup", - }, - {} -}; - -static struct platform_driver mpc52xx_wkup_gpiochip_driver = { - .driver = { - .name = "gpio_wkup", - .owner = THIS_MODULE, - .of_match_table = mpc52xx_wkup_gpiochip_match, - }, - .probe = mpc52xx_wkup_gpiochip_probe, - .remove = mpc52xx_gpiochip_remove, -}; - -/* - * GPIO LIB API implementation for simple GPIOs - * - * There's a maximum of 32 simple GPIOs. Which of these are available - * for use depends on your board setup. - * The numbering reflects the bit numbering in the port registers: - * - * 0..1 > reserved - * 2..3 > IRDA - * 4..7 > ETHR - * 8..11 > reserved - * 12..15 > USB - * 16..17 > reserved - * 18..23 > PSC3 - * 24..27 > PSC2 - * 28..31 > PSC1 - */ -static int mpc52xx_simple_gpio_get(struct gpio_chip *gc, unsigned int gpio) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpio __iomem *regs = mm_gc->regs; - unsigned int ret; - - ret = (in_be32(®s->simple_ival) >> (31 - gpio)) & 1; - - return ret; -} - -static inline void -__mpc52xx_simple_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpiochip *chip = container_of(mm_gc, - struct mpc52xx_gpiochip, mmchip); - struct mpc52xx_gpio __iomem *regs = mm_gc->regs; - - if (val) - chip->shadow_dvo |= 1 << (31 - gpio); - else - chip->shadow_dvo &= ~(1 << (31 - gpio)); - out_be32(®s->simple_dvo, chip->shadow_dvo); -} - -static void -mpc52xx_simple_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) -{ - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - - __mpc52xx_simple_gpio_set(gc, gpio, val); - - spin_unlock_irqrestore(&gpio_lock, flags); - - pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); -} - -static int mpc52xx_simple_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpiochip *chip = container_of(mm_gc, - struct mpc52xx_gpiochip, mmchip); - struct mpc52xx_gpio __iomem *regs = mm_gc->regs; - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - - /* set the direction */ - chip->shadow_ddr &= ~(1 << (31 - gpio)); - out_be32(®s->simple_ddr, chip->shadow_ddr); - - /* and enable the pin */ - chip->shadow_gpioe |= 1 << (31 - gpio); - out_be32(®s->simple_gpioe, chip->shadow_gpioe); - - spin_unlock_irqrestore(&gpio_lock, flags); - - return 0; -} - -static int -mpc52xx_simple_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpiochip *chip = container_of(mm_gc, - struct mpc52xx_gpiochip, mmchip); - struct mpc52xx_gpio __iomem *regs = mm_gc->regs; - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - - /* First set initial value */ - __mpc52xx_simple_gpio_set(gc, gpio, val); - - /* Then set direction */ - chip->shadow_ddr |= 1 << (31 - gpio); - out_be32(®s->simple_ddr, chip->shadow_ddr); - - /* Finally enable the pin */ - chip->shadow_gpioe |= 1 << (31 - gpio); - out_be32(®s->simple_gpioe, chip->shadow_gpioe); - - spin_unlock_irqrestore(&gpio_lock, flags); - - pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); - - return 0; -} - -static int __devinit mpc52xx_simple_gpiochip_probe(struct platform_device *ofdev) -{ - struct mpc52xx_gpiochip *chip; - struct gpio_chip *gc; - struct mpc52xx_gpio __iomem *regs; - int ret; - - chip = kzalloc(sizeof(*chip), GFP_KERNEL); - if (!chip) - return -ENOMEM; - - gc = &chip->mmchip.gc; - - gc->ngpio = 32; - gc->direction_input = mpc52xx_simple_gpio_dir_in; - gc->direction_output = mpc52xx_simple_gpio_dir_out; - gc->get = mpc52xx_simple_gpio_get; - gc->set = mpc52xx_simple_gpio_set; - - ret = of_mm_gpiochip_add(ofdev->dev.of_node, &chip->mmchip); - if (ret) - return ret; - - regs = chip->mmchip.regs; - chip->shadow_gpioe = in_be32(®s->simple_gpioe); - chip->shadow_ddr = in_be32(®s->simple_ddr); - chip->shadow_dvo = in_be32(®s->simple_dvo); - - return 0; -} - -static const struct of_device_id mpc52xx_simple_gpiochip_match[] = { - { - .compatible = "fsl,mpc5200-gpio", - }, - {} -}; - -static struct platform_driver mpc52xx_simple_gpiochip_driver = { - .driver = { - .name = "gpio", - .owner = THIS_MODULE, - .of_match_table = mpc52xx_simple_gpiochip_match, - }, - .probe = mpc52xx_simple_gpiochip_probe, - .remove = mpc52xx_gpiochip_remove, -}; - -static int __init mpc52xx_gpio_init(void) -{ - if (platform_driver_register(&mpc52xx_wkup_gpiochip_driver)) - printk(KERN_ERR "Unable to register wakeup GPIO driver\n"); - - if (platform_driver_register(&mpc52xx_simple_gpiochip_driver)) - printk(KERN_ERR "Unable to register simple GPIO driver\n"); - - return 0; -} - - -/* Make sure we get initialised before anyone else tries to use us */ -subsys_initcall(mpc52xx_gpio_init); - -/* No exit call at the moment as we cannot unregister of gpio chips */ - -MODULE_DESCRIPTION("Freescale MPC52xx gpio driver"); -MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de"); -MODULE_LICENSE("GPL v2"); - |