summaryrefslogtreecommitdiff
path: root/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel/cpu/cpufreq/speedstep-smi.c')
-rw-r--r--arch/x86/kernel/cpu/cpufreq/speedstep-smi.c166
1 files changed, 101 insertions, 65 deletions
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
index 8a85c93bd62a..befea088e4f5 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
@@ -19,8 +19,8 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/io.h>
#include <asm/ist.h>
-#include <asm/io.h>
#include "speedstep-lib.h"
@@ -30,12 +30,12 @@
* If user gives it, these are used.
*
*/
-static int smi_port = 0;
-static int smi_cmd = 0;
-static unsigned int smi_sig = 0;
+static int smi_port;
+static int smi_cmd;
+static unsigned int smi_sig;
/* info about the processor */
-static unsigned int speedstep_processor = 0;
+static unsigned int speedstep_processor;
/*
* There are only two frequency states for each processor. Values
@@ -56,12 +56,13 @@ static struct cpufreq_frequency_table speedstep_freqs[] = {
* of DMA activity going on? */
#define SMI_TRIES 5
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-smi", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+ "speedstep-smi", msg)
/**
* speedstep_smi_ownership
*/
-static int speedstep_smi_ownership (void)
+static int speedstep_smi_ownership(void)
{
u32 command, result, magic, dummy;
u32 function = GET_SPEEDSTEP_OWNER;
@@ -70,16 +71,18 @@ static int speedstep_smi_ownership (void)
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
magic = virt_to_phys(magic_data);
- dprintk("trying to obtain ownership with command %x at port %x\n", command, smi_port);
+ dprintk("trying to obtain ownership with command %x at port %x\n",
+ command, smi_port);
__asm__ __volatile__(
"push %%ebp\n"
"out %%al, (%%dx)\n"
"pop %%ebp\n"
- : "=D" (result), "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy),
- "=S" (dummy)
+ : "=D" (result),
+ "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy),
+ "=S" (dummy)
: "a" (command), "b" (function), "c" (0), "d" (smi_port),
- "D" (0), "S" (magic)
+ "D" (0), "S" (magic)
: "memory"
);
@@ -97,10 +100,10 @@ static int speedstep_smi_ownership (void)
* even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing
* shows that the latter occurs if !(ist_info.event & 0xFFFF).
*/
-static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
+static int speedstep_smi_get_freqs(unsigned int *low, unsigned int *high)
{
u32 command, result = 0, edi, high_mhz, low_mhz, dummy;
- u32 state=0;
+ u32 state = 0;
u32 function = GET_SPEEDSTEP_FREQS;
if (!(ist_info.event & 0xFFFF)) {
@@ -110,17 +113,25 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
- dprintk("trying to determine frequencies with command %x at port %x\n", command, smi_port);
+ dprintk("trying to determine frequencies with command %x at port %x\n",
+ command, smi_port);
__asm__ __volatile__(
"push %%ebp\n"
"out %%al, (%%dx)\n"
"pop %%ebp"
- : "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi), "=S" (dummy)
- : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0)
+ : "=a" (result),
+ "=b" (high_mhz),
+ "=c" (low_mhz),
+ "=d" (state), "=D" (edi), "=S" (dummy)
+ : "a" (command),
+ "b" (function),
+ "c" (state),
+ "d" (smi_port), "S" (0), "D" (0)
);
- dprintk("result %x, low_freq %u, high_freq %u\n", result, low_mhz, high_mhz);
+ dprintk("result %x, low_freq %u, high_freq %u\n",
+ result, low_mhz, high_mhz);
/* abort if results are obviously incorrect... */
if ((high_mhz + low_mhz) < 600)
@@ -137,26 +148,30 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
* @state: processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
*
*/
-static int speedstep_get_state (void)
+static int speedstep_get_state(void)
{
- u32 function=GET_SPEEDSTEP_STATE;
+ u32 function = GET_SPEEDSTEP_STATE;
u32 result, state, edi, command, dummy;
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
- dprintk("trying to determine current setting with command %x at port %x\n", command, smi_port);
+ dprintk("trying to determine current setting with command %x "
+ "at port %x\n", command, smi_port);
__asm__ __volatile__(
"push %%ebp\n"
"out %%al, (%%dx)\n"
"pop %%ebp\n"
- : "=a" (result), "=b" (state), "=D" (edi), "=c" (dummy), "=d" (dummy), "=S" (dummy)
- : "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0), "D" (0)
+ : "=a" (result),
+ "=b" (state), "=D" (edi),
+ "=c" (dummy), "=d" (dummy), "=S" (dummy)
+ : "a" (command), "b" (function), "c" (0),
+ "d" (smi_port), "S" (0), "D" (0)
);
dprintk("state is %x, result is %x\n", state, result);
- return (state & 1);
+ return state & 1;
}
@@ -165,11 +180,11 @@ static int speedstep_get_state (void)
* @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
*
*/
-static void speedstep_set_state (unsigned int state)
+static void speedstep_set_state(unsigned int state)
{
unsigned int result = 0, command, new_state, dummy;
unsigned long flags;
- unsigned int function=SET_SPEEDSTEP_STATE;
+ unsigned int function = SET_SPEEDSTEP_STATE;
unsigned int retry = 0;
if (state > 0x1)
@@ -180,11 +195,14 @@ static void speedstep_set_state (unsigned int state)
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
- dprintk("trying to set frequency to state %u with command %x at port %x\n", state, command, smi_port);
+ dprintk("trying to set frequency to state %u "
+ "with command %x at port %x\n",
+ state, command, smi_port);
do {
if (retry) {
- dprintk("retry %u, previous result %u, waiting...\n", retry, result);
+ dprintk("retry %u, previous result %u, waiting...\n",
+ retry, result);
mdelay(retry * 50);
}
retry++;
@@ -192,20 +210,26 @@ static void speedstep_set_state (unsigned int state)
"push %%ebp\n"
"out %%al, (%%dx)\n"
"pop %%ebp"
- : "=b" (new_state), "=D" (result), "=c" (dummy), "=a" (dummy),
- "=d" (dummy), "=S" (dummy)
- : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0)
+ : "=b" (new_state), "=D" (result),
+ "=c" (dummy), "=a" (dummy),
+ "=d" (dummy), "=S" (dummy)
+ : "a" (command), "b" (function), "c" (state),
+ "d" (smi_port), "S" (0), "D" (0)
);
} while ((new_state != state) && (retry <= SMI_TRIES));
/* enable IRQs */
local_irq_restore(flags);
- if (new_state == state) {
- dprintk("change to %u MHz succeeded after %u tries with result %u\n", (speedstep_freqs[new_state].frequency / 1000), retry, result);
- } else {
- printk(KERN_ERR "cpufreq: change to state %u failed with new_state %u and result %u\n", state, new_state, result);
- }
+ if (new_state == state)
+ dprintk("change to %u MHz succeeded after %u tries "
+ "with result %u\n",
+ (speedstep_freqs[new_state].frequency / 1000),
+ retry, result);
+ else
+ printk(KERN_ERR "cpufreq: change to state %u "
+ "failed with new_state %u and result %u\n",
+ state, new_state, result);
return;
}
@@ -219,13 +243,14 @@ static void speedstep_set_state (unsigned int state)
*
* Sets a new CPUFreq policy/freq.
*/
-static int speedstep_target (struct cpufreq_policy *policy,
+static int speedstep_target(struct cpufreq_policy *policy,
unsigned int target_freq, unsigned int relation)
{
unsigned int newstate = 0;
struct cpufreq_freqs freqs;
- if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate))
+ if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0],
+ target_freq, relation, &newstate))
return -EINVAL;
freqs.old = speedstep_freqs[speedstep_get_state()].frequency;
@@ -250,7 +275,7 @@ static int speedstep_target (struct cpufreq_policy *policy,
* Limit must be within speedstep_low_freq and speedstep_high_freq, with
* at least one border included.
*/
-static int speedstep_verify (struct cpufreq_policy *policy)
+static int speedstep_verify(struct cpufreq_policy *policy)
{
return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
}
@@ -259,7 +284,8 @@ static int speedstep_verify (struct cpufreq_policy *policy)
static int speedstep_cpu_init(struct cpufreq_policy *policy)
{
int result;
- unsigned int speed,state;
+ unsigned int speed, state;
+ unsigned int *low, *high;
/* capability check */
if (policy->cpu != 0)
@@ -272,19 +298,23 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
}
/* detect low and high frequency */
- result = speedstep_smi_get_freqs(&speedstep_freqs[SPEEDSTEP_LOW].frequency,
- &speedstep_freqs[SPEEDSTEP_HIGH].frequency);
+ low = &speedstep_freqs[SPEEDSTEP_LOW].frequency;
+ high = &speedstep_freqs[SPEEDSTEP_HIGH].frequency;
+
+ result = speedstep_smi_get_freqs(low, high);
if (result) {
- /* fall back to speedstep_lib.c dection mechanism: try both states out */
- dprintk("could not detect low and high frequencies by SMI call.\n");
+ /* fall back to speedstep_lib.c dection mechanism:
+ * try both states out */
+ dprintk("could not detect low and high frequencies "
+ "by SMI call.\n");
result = speedstep_get_freqs(speedstep_processor,
- &speedstep_freqs[SPEEDSTEP_LOW].frequency,
- &speedstep_freqs[SPEEDSTEP_HIGH].frequency,
+ low, high,
NULL,
&speedstep_set_state);
if (result) {
- dprintk("could not detect two different speeds -- aborting.\n");
+ dprintk("could not detect two different speeds"
+ " -- aborting.\n");
return result;
} else
dprintk("workaround worked.\n");
@@ -295,7 +325,8 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
speed = speedstep_freqs[state].frequency;
dprintk("currently at %s speed setting - %i MHz\n",
- (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high",
+ (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency)
+ ? "low" : "high",
(speed / 1000));
/* cpuinfo and default policy values */
@@ -304,7 +335,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
if (result)
- return (result);
+ return result;
cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
@@ -321,7 +352,7 @@ static unsigned int speedstep_get(unsigned int cpu)
{
if (cpu)
return -ENODEV;
- return speedstep_get_processor_frequency(speedstep_processor);
+ return speedstep_get_frequency(speedstep_processor);
}
@@ -335,7 +366,7 @@ static int speedstep_resume(struct cpufreq_policy *policy)
return result;
}
-static struct freq_attr* speedstep_attr[] = {
+static struct freq_attr *speedstep_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL,
};
@@ -364,21 +395,23 @@ static int __init speedstep_init(void)
speedstep_processor = speedstep_detect_processor();
switch (speedstep_processor) {
- case SPEEDSTEP_PROCESSOR_PIII_T:
- case SPEEDSTEP_PROCESSOR_PIII_C:
- case SPEEDSTEP_PROCESSOR_PIII_C_EARLY:
+ case SPEEDSTEP_CPU_PIII_T:
+ case SPEEDSTEP_CPU_PIII_C:
+ case SPEEDSTEP_CPU_PIII_C_EARLY:
break;
default:
speedstep_processor = 0;
}
if (!speedstep_processor) {
- dprintk ("No supported Intel CPU detected.\n");
+ dprintk("No supported Intel CPU detected.\n");
return -ENODEV;
}
- dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n",
- ist_info.signature, ist_info.command, ist_info.event, ist_info.perf_level);
+ dprintk("signature:0x%.8lx, command:0x%.8lx, "
+ "event:0x%.8lx, perf_level:0x%.8lx.\n",
+ ist_info.signature, ist_info.command,
+ ist_info.event, ist_info.perf_level);
/* Error if no IST-SMI BIOS or no PARM
sig= 'ISGE' aka 'Intel Speedstep Gate E' */
@@ -416,17 +449,20 @@ static void __exit speedstep_exit(void)
cpufreq_unregister_driver(&speedstep_driver);
}
-module_param(smi_port, int, 0444);
-module_param(smi_cmd, int, 0444);
-module_param(smi_sig, uint, 0444);
+module_param(smi_port, int, 0444);
+module_param(smi_cmd, int, 0444);
+module_param(smi_sig, uint, 0444);
-MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value -- Intel's default setting is 0xb2");
-MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value -- Intel's default setting is 0x82");
-MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the SMI interface.");
+MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value "
+ "-- Intel's default setting is 0xb2");
+MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value "
+ "-- Intel's default setting is 0x82");
+MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the "
+ "SMI interface.");
-MODULE_AUTHOR ("Hiroshi Miura");
-MODULE_DESCRIPTION ("Speedstep driver for IST applet SMI interface.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Hiroshi Miura");
+MODULE_DESCRIPTION("Speedstep driver for IST applet SMI interface.");
+MODULE_LICENSE("GPL");
module_init(speedstep_init);
module_exit(speedstep_exit);
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-25 12:02:58 +0300