diff options
Diffstat (limited to 'arch/x86/include/asm/io_64.h')
| -rw-r--r-- | arch/x86/include/asm/io_64.h | 244 |
1 files changed, 244 insertions, 0 deletions
diff --git a/arch/x86/include/asm/io_64.h b/arch/x86/include/asm/io_64.h new file mode 100644 index 000000000000..ee6e086b7dfe --- /dev/null +++ b/arch/x86/include/asm/io_64.h @@ -0,0 +1,244 @@ +#ifndef ASM_X86__IO_64_H +#define ASM_X86__IO_64_H + + +/* + * This file contains the definitions for the x86 IO instructions + * inb/inw/inl/outb/outw/outl and the "string versions" of the same + * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" + * versions of the single-IO instructions (inb_p/inw_p/..). + * + * This file is not meant to be obfuscating: it's just complicated + * to (a) handle it all in a way that makes gcc able to optimize it + * as well as possible and (b) trying to avoid writing the same thing + * over and over again with slight variations and possibly making a + * mistake somewhere. + */ + +/* + * Thanks to James van Artsdalen for a better timing-fix than + * the two short jumps: using outb's to a nonexistent port seems + * to guarantee better timings even on fast machines. + * + * On the other hand, I'd like to be sure of a non-existent port: + * I feel a bit unsafe about using 0x80 (should be safe, though) + * + * Linus + */ + + /* + * Bit simplified and optimized by Jan Hubicka + * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999. + * + * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added, + * isa_read[wl] and isa_write[wl] fixed + * - Arnaldo Carvalho de Melo <acme@conectiva.com.br> + */ + +extern void native_io_delay(void); + +extern int io_delay_type; +extern void io_delay_init(void); + +#if defined(CONFIG_PARAVIRT) +#include <asm/paravirt.h> +#else + +static inline void slow_down_io(void) +{ + native_io_delay(); +#ifdef REALLY_SLOW_IO + native_io_delay(); + native_io_delay(); + native_io_delay(); +#endif +} +#endif + +/* + * Talk about misusing macros.. + */ +#define __OUT1(s, x) \ +static inline void out##s(unsigned x value, unsigned short port) { + +#define __OUT2(s, s1, s2) \ +asm volatile ("out" #s " %" s1 "0,%" s2 "1" + +#ifndef REALLY_SLOW_IO +#define REALLY_SLOW_IO +#define UNSET_REALLY_SLOW_IO +#endif + +#define __OUT(s, s1, x) \ + __OUT1(s, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port)); \ + } \ + __OUT1(s##_p, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port)); \ + slow_down_io(); \ +} + +#define __IN1(s) \ +static inline RETURN_TYPE in##s(unsigned short port) \ +{ \ + RETURN_TYPE _v; + +#define __IN2(s, s1, s2) \ + asm volatile ("in" #s " %" s2 "1,%" s1 "0" + +#define __IN(s, s1, i...) \ + __IN1(s) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i); \ + return _v; \ + } \ + __IN1(s##_p) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i); \ + slow_down_io(); \ + return _v; } + +#ifdef UNSET_REALLY_SLOW_IO +#undef REALLY_SLOW_IO +#endif + +#define __INS(s) \ +static inline void ins##s(unsigned short port, void *addr, \ + unsigned long count) \ +{ \ + asm volatile ("rep ; ins" #s \ + : "=D" (addr), "=c" (count) \ + : "d" (port), "0" (addr), "1" (count)); \ +} + +#define __OUTS(s) \ +static inline void outs##s(unsigned short port, const void *addr, \ + unsigned long count) \ +{ \ + asm volatile ("rep ; outs" #s \ + : "=S" (addr), "=c" (count) \ + : "d" (port), "0" (addr), "1" (count)); \ +} + +#define RETURN_TYPE unsigned char +__IN(b, "") +#undef RETURN_TYPE +#define RETURN_TYPE unsigned short +__IN(w, "") +#undef RETURN_TYPE +#define RETURN_TYPE unsigned int +__IN(l, "") +#undef RETURN_TYPE + +__OUT(b, "b", char) +__OUT(w, "w", short) +__OUT(l, , int) + +__INS(b) +__INS(w) +__INS(l) + +__OUTS(b) +__OUTS(w) +__OUTS(l) + +#define IO_SPACE_LIMIT 0xffff + +#if defined(__KERNEL__) && defined(__x86_64__) + +#include <linux/vmalloc.h> + +#ifndef __i386__ +/* + * Change virtual addresses to physical addresses and vv. + * These are pretty trivial + */ +static inline unsigned long virt_to_phys(volatile void *address) +{ + return __pa(address); +} + +static inline void *phys_to_virt(unsigned long address) +{ + return __va(address); +} +#endif + +/* + * Change "struct page" to physical address. + */ +#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT) + +#include <asm-generic/iomap.h> + +/* + * This one maps high address device memory and turns off caching for that area. + * it's useful if some control registers are in such an area and write combining + * or read caching is not desirable: + */ +extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size); +extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size); +extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size, + unsigned long prot_val); + +/* + * The default ioremap() behavior is non-cached: + */ +static inline void __iomem *ioremap(resource_size_t offset, unsigned long size) +{ + return ioremap_nocache(offset, size); +} + +extern void iounmap(volatile void __iomem *addr); + +extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys); + +/* + * ISA I/O bus memory addresses are 1:1 with the physical address. + */ +#define isa_virt_to_bus virt_to_phys +#define isa_page_to_bus page_to_phys +#define isa_bus_to_virt phys_to_virt + +/* + * However PCI ones are not necessarily 1:1 and therefore these interfaces + * are forbidden in portable PCI drivers. + * + * Allow them on x86 for legacy drivers, though. + */ +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +void __memcpy_fromio(void *, unsigned long, unsigned); +void __memcpy_toio(unsigned long, const void *, unsigned); + +static inline void memcpy_fromio(void *to, const volatile void __iomem *from, + unsigned len) +{ + __memcpy_fromio(to, (unsigned long)from, len); +} + +static inline void memcpy_toio(volatile void __iomem *to, const void *from, + unsigned len) +{ + __memcpy_toio((unsigned long)to, from, len); +} + +void memset_io(volatile void __iomem *a, int b, size_t c); + +/* + * ISA space is 'always mapped' on a typical x86 system, no need to + * explicitly ioremap() it. The fact that the ISA IO space is mapped + * to PAGE_OFFSET is pure coincidence - it does not mean ISA values + * are physical addresses. The following constant pointer can be + * used as the IO-area pointer (it can be iounmapped as well, so the + * analogy with PCI is quite large): + */ +#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET)) + +#define flush_write_buffers() + +#define BIO_VMERGE_BOUNDARY iommu_bio_merge + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* __KERNEL__ */ + +#endif /* ASM_X86__IO_64_H */ |