diff options
Diffstat (limited to 'arch/sh/mm')
| -rw-r--r-- | arch/sh/mm/Kconfig | 29 | ||||
| -rw-r--r-- | arch/sh/mm/Makefile_32 | 7 | ||||
| -rw-r--r-- | arch/sh/mm/asids-debugfs.c | 4 | ||||
| -rw-r--r-- | arch/sh/mm/ioremap_32.c | 8 | ||||
| -rw-r--r-- | arch/sh/mm/pmb-fixed.c | 45 | ||||
| -rw-r--r-- | arch/sh/mm/pmb.c | 38 | ||||
| -rw-r--r-- | arch/sh/mm/tlb-pteaex.c | 96 |
7 files changed, 218 insertions, 9 deletions
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 555ec9714b9e..10c24356d2d5 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -57,7 +57,7 @@ config 32BIT bool default y if CPU_SH5 -config PMB +config PMB_ENABLE bool "Support 32-bit physical addressing through PMB" depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785) select 32BIT @@ -67,6 +67,33 @@ config PMB 32-bits through the SH-4A PMB. If this is not set, legacy 29-bit physical addressing will be used. +choice + prompt "PMB handling type" + depends on PMB_ENABLE + default PMB_FIXED + +config PMB + bool "PMB" + depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785) + select 32BIT + help + If you say Y here, physical addressing will be extended to + 32-bits through the SH-4A PMB. If this is not set, legacy + 29-bit physical addressing will be used. + +config PMB_FIXED + bool "fixed PMB" + depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || \ + CPU_SUBTYPE_SH7785) + select 32BIT + help + If this option is enabled, fixed PMB mappings are inherited + from the boot loader, and the kernel does not attempt dynamic + management. This is the closest to legacy 29-bit physical mode, + and allows systems to support up to 512MiB of system memory. + +endchoice + config X2TLB bool "Enable extended TLB mode" depends on (CPU_SHX2 || CPU_SHX3) && MMU && EXPERIMENTAL diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32 index cb2f3f299591..986a1e055834 100644 --- a/arch/sh/mm/Makefile_32 +++ b/arch/sh/mm/Makefile_32 @@ -25,8 +25,10 @@ obj-$(CONFIG_CPU_SH4) += cache-debugfs.o endif ifdef CONFIG_MMU -obj-$(CONFIG_CPU_SH3) += tlb-sh3.o -obj-$(CONFIG_CPU_SH4) += tlb-sh4.o +tlb-$(CONFIG_CPU_SH3) := tlb-sh3.o +tlb-$(CONFIG_CPU_SH4) := tlb-sh4.o +tlb-$(CONFIG_CPU_HAS_PTEAEX) := tlb-pteaex.o +obj-y += $(tlb-y) ifndef CONFIG_CACHE_OFF obj-$(CONFIG_CPU_SH4) += pg-sh4.o obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o @@ -35,6 +37,7 @@ endif obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_PMB) += pmb.o +obj-$(CONFIG_PMB_FIXED) += pmb-fixed.o obj-$(CONFIG_NUMA) += numa.o EXTRA_CFLAGS += -Werror diff --git a/arch/sh/mm/asids-debugfs.c b/arch/sh/mm/asids-debugfs.c index 8e912a15e94f..cd8c3bf39b5a 100644 --- a/arch/sh/mm/asids-debugfs.c +++ b/arch/sh/mm/asids-debugfs.c @@ -37,10 +37,8 @@ static int asids_seq_show(struct seq_file *file, void *iter) continue; if (p->mm) - seq_printf(file, "%5d : %02lx\n", pid, + seq_printf(file, "%5d : %04lx\n", pid, cpu_asid(smp_processor_id(), p->mm)); - else - seq_printf(file, "%5d : (none)\n", pid); } read_unlock(&tasklist_lock); diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c index 32946fba123e..60cc486d2c2c 100644 --- a/arch/sh/mm/ioremap_32.c +++ b/arch/sh/mm/ioremap_32.c @@ -59,11 +59,13 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, if (is_pci_memaddr(phys_addr) && is_pci_memaddr(last_addr)) return (void __iomem *)phys_addr; +#if !defined(CONFIG_PMB_FIXED) /* * Don't allow anybody to remap normal RAM that we're using.. */ if (phys_addr < virt_to_phys(high_memory)) return NULL; +#endif /* * Mappings have to be page-aligned @@ -81,7 +83,7 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, area->phys_addr = phys_addr; orig_addr = addr = (unsigned long)area->addr; -#ifdef CONFIG_32BIT +#ifdef CONFIG_PMB /* * First try to remap through the PMB once a valid VMA has been * established. Smaller allocations (or the rest of the size @@ -119,10 +121,10 @@ void __iounmap(void __iomem *addr) unsigned long seg = PXSEG(vaddr); struct vm_struct *p; - if (seg < P3SEG || seg >= P3_ADDR_MAX || is_pci_memaddr(vaddr)) + if (seg < P3SEG || vaddr >= P3_ADDR_MAX || is_pci_memaddr(vaddr)) return; -#ifdef CONFIG_32BIT +#ifdef CONFIG_PMB /* * Purge any PMB entries that may have been established for this * mapping, then proceed with conventional VMA teardown. diff --git a/arch/sh/mm/pmb-fixed.c b/arch/sh/mm/pmb-fixed.c new file mode 100644 index 000000000000..43c8eac4d8a1 --- /dev/null +++ b/arch/sh/mm/pmb-fixed.c @@ -0,0 +1,45 @@ +/* + * arch/sh/mm/fixed_pmb.c + * + * Copyright (C) 2009 Renesas Solutions Corp. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/io.h> +#include <asm/mmu.h> +#include <asm/mmu_context.h> + +static int __uses_jump_to_uncached fixed_pmb_init(void) +{ + int i; + unsigned long addr, data; + + jump_to_uncached(); + + for (i = 0; i < PMB_ENTRY_MAX; i++) { + addr = PMB_DATA + (i << PMB_E_SHIFT); + data = ctrl_inl(addr); + if (!(data & PMB_V)) + continue; + + if (data & PMB_C) { +#if defined(CONFIG_CACHE_WRITETHROUGH) + data |= PMB_WT; +#elif defined(CONFIG_CACHE_WRITEBACK) + data &= ~PMB_WT; +#else + data &= ~(PMB_C | PMB_WT); +#endif + } + ctrl_outl(data, addr); + } + + back_to_cached(); + + return 0; +} +arch_initcall(fixed_pmb_init); diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c index 84241676265e..b1a714a92b14 100644 --- a/arch/sh/mm/pmb.c +++ b/arch/sh/mm/pmb.c @@ -15,6 +15,8 @@ */ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/sysdev.h> +#include <linux/cpu.h> #include <linux/module.h> #include <linux/slab.h> #include <linux/bitops.h> @@ -402,3 +404,39 @@ static int __init pmb_debugfs_init(void) return 0; } postcore_initcall(pmb_debugfs_init); + +#ifdef CONFIG_PM +static int pmb_sysdev_suspend(struct sys_device *dev, pm_message_t state) +{ + static pm_message_t prev_state; + + /* Restore the PMB after a resume from hibernation */ + if (state.event == PM_EVENT_ON && + prev_state.event == PM_EVENT_FREEZE) { + struct pmb_entry *pmbe; + spin_lock_irq(&pmb_list_lock); + for (pmbe = pmb_list; pmbe; pmbe = pmbe->next) + set_pmb_entry(pmbe); + spin_unlock_irq(&pmb_list_lock); + } + prev_state = state; + return 0; +} + +static int pmb_sysdev_resume(struct sys_device *dev) +{ + return pmb_sysdev_suspend(dev, PMSG_ON); +} + +static struct sysdev_driver pmb_sysdev_driver = { + .suspend = pmb_sysdev_suspend, + .resume = pmb_sysdev_resume, +}; + +static int __init pmb_sysdev_init(void) +{ + return sysdev_driver_register(&cpu_sysdev_class, &pmb_sysdev_driver); +} + +subsys_initcall(pmb_sysdev_init); +#endif diff --git a/arch/sh/mm/tlb-pteaex.c b/arch/sh/mm/tlb-pteaex.c new file mode 100644 index 000000000000..2aab3ea934d7 --- /dev/null +++ b/arch/sh/mm/tlb-pteaex.c @@ -0,0 +1,96 @@ +/* + * arch/sh/mm/tlb-pteaex.c + * + * TLB operations for SH-X3 CPUs featuring PTE ASID Extensions. + * + * Copyright (C) 2009 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/io.h> +#include <asm/system.h> +#include <asm/mmu_context.h> +#include <asm/cacheflush.h> + +void update_mmu_cache(struct vm_area_struct * vma, + unsigned long address, pte_t pte) +{ + unsigned long flags; + unsigned long pteval; + unsigned long vpn; + + /* Ptrace may call this routine. */ + if (vma && current->active_mm != vma->vm_mm) + return; + +#ifndef CONFIG_CACHE_OFF + { + unsigned long pfn = pte_pfn(pte); + + if (pfn_valid(pfn)) { + struct page *page = pfn_to_page(pfn); + + if (!test_bit(PG_mapped, &page->flags)) { + unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; + __flush_wback_region((void *)P1SEGADDR(phys), + PAGE_SIZE); + __set_bit(PG_mapped, &page->flags); + } + } + } +#endif + + local_irq_save(flags); + + /* Set PTEH register */ + vpn = address & MMU_VPN_MASK; + __raw_writel(vpn, MMU_PTEH); + + /* Set PTEAEX */ + __raw_writel(get_asid(), MMU_PTEAEX); + + pteval = pte.pte_low; + + /* Set PTEA register */ +#ifdef CONFIG_X2TLB + /* + * For the extended mode TLB this is trivial, only the ESZ and + * EPR bits need to be written out to PTEA, with the remainder of + * the protection bits (with the exception of the compat-mode SZ + * and PR bits, which are cleared) being written out in PTEL. + */ + __raw_writel(pte.pte_high, MMU_PTEA); +#endif + + /* Set PTEL register */ + pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */ +#ifdef CONFIG_CACHE_WRITETHROUGH + pteval |= _PAGE_WT; +#endif + /* conveniently, we want all the software flags to be 0 anyway */ + __raw_writel(pteval, MMU_PTEL); + + /* Load the TLB */ + asm volatile("ldtlb": /* no output */ : /* no input */ : "memory"); + local_irq_restore(flags); +} + +/* + * While SH-X2 extended TLB mode splits out the memory-mapped I/UTLB + * data arrays, SH-X3 cores with PTEAEX split out the memory-mapped + * address arrays. In compat mode the second array is inaccessible, while + * in extended mode, the legacy 8-bit ASID field in address array 1 has + * undefined behaviour. + */ +void __uses_jump_to_uncached local_flush_tlb_one(unsigned long asid, + unsigned long page) +{ + jump_to_uncached(); + __raw_writel(page, MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT); + __raw_writel(asid, MMU_UTLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT); + back_to_cached(); +} |