diff options
Diffstat (limited to 'arch/powerpc')
270 files changed, 8660 insertions, 6340 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index a030e5ecb10b..7cd32c038286 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -94,6 +94,7 @@ config PPC select OF_RESERVED_MEM select HAVE_FTRACE_MCOUNT_RECORD select HAVE_DYNAMIC_FTRACE + select HAVE_DYNAMIC_FTRACE_WITH_REGS if MPROFILE_KERNEL select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_GRAPH_TRACER select SYSCTL_EXCEPTION_TRACE @@ -304,7 +305,7 @@ config ZONE_DMA32 config PGTABLE_LEVELS int default 2 if !PPC64 - default 3 if PPC_64K_PAGES + default 3 if PPC_64K_PAGES && !PPC_BOOK3S_64 default 4 source "init/Kconfig" @@ -374,6 +375,24 @@ config PPC_TRANSACTIONAL_MEM ---help--- Support user-mode Transactional Memory on POWERPC. +config DISABLE_MPROFILE_KERNEL + bool "Disable use of mprofile-kernel for kernel tracing" + depends on PPC64 && CPU_LITTLE_ENDIAN + default y + help + Selecting this options disables use of the mprofile-kernel ABI for + kernel tracing. That will cause options such as live patching + (CONFIG_LIVEPATCH) which depend on CONFIG_DYNAMIC_FTRACE_WITH_REGS to + be disabled also. + + If you have a toolchain which supports mprofile-kernel, then you can + enable this. Otherwise leave it disabled. If you're not sure, say + "N". + +config MPROFILE_KERNEL + depends on PPC64 && CPU_LITTLE_ENDIAN + def_bool !DISABLE_MPROFILE_KERNEL + config IOMMU_HELPER def_bool PPC64 @@ -390,7 +409,7 @@ config SWIOTLB config HOTPLUG_CPU bool "Support for enabling/disabling CPUs" depends on SMP && (PPC_PSERIES || \ - PPC_PMAC || PPC_POWERNV || (PPC_85xx && !PPC_E500MC)) + PPC_PMAC || PPC_POWERNV || FSL_SOC_BOOKE) ---help--- Say Y here to be able to disable and re-enable individual CPUs at runtime on SMP machines. diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 96efd8213c1c..709a22a3e824 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -133,6 +133,21 @@ else CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=powerpc64 endif +ifdef CONFIG_MPROFILE_KERNEL + ifeq ($(shell $(srctree)/arch/powerpc/scripts/gcc-check-mprofile-kernel.sh $(CC) -I$(srctree)/include -D__KERNEL__),OK) + CC_FLAGS_FTRACE := -pg -mprofile-kernel + KBUILD_CPPFLAGS += -DCC_USING_MPROFILE_KERNEL + else + # If the user asked for mprofile-kernel but the toolchain doesn't + # support it, emit a warning and deliberately break the build later + # with mprofile-kernel-not-supported. We would prefer to make this an + # error right here, but then the user would never be able to run + # oldconfig to change their configuration. + $(warning Compiler does not support mprofile-kernel, set CONFIG_DISABLE_MPROFILE_KERNEL) + CC_FLAGS_FTRACE := -mprofile-kernel-not-supported + endif +endif + CFLAGS-$(CONFIG_CELL_CPU) += $(call cc-option,-mcpu=cell) CFLAGS-$(CONFIG_POWER4_CPU) += $(call cc-option,-mcpu=power4) CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5) @@ -310,6 +325,16 @@ corenet64_smp_defconfig: $(call merge_into_defconfig,corenet_basic_defconfig,\ 85xx-64bit 85xx-smp altivec 85xx-hw fsl-emb-nonhw) +PHONY += mpc86xx_defconfig +mpc86xx_defconfig: + $(call merge_into_defconfig,mpc86xx_basic_defconfig,\ + 86xx-hw fsl-emb-nonhw) + +PHONY += mpc86xx_smp_defconfig +mpc86xx_smp_defconfig: + $(call merge_into_defconfig,mpc86xx_basic_defconfig,\ + 86xx-smp 86xx-hw fsl-emb-nonhw) + define archhelp @echo '* zImage - Build default images selected by kernel config' @echo ' zImage.* - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)' diff --git a/arch/powerpc/boot/dts/fsl/b4860qds.dts b/arch/powerpc/boot/dts/fsl/b4860qds.dts index ba8c9bea33ac..a8bc419959ca 100644 --- a/arch/powerpc/boot/dts/fsl/b4860qds.dts +++ b/arch/powerpc/boot/dts/fsl/b4860qds.dts @@ -1,7 +1,7 @@ /* * B4860DS Device Tree Source * - * Copyright 2012 Freescale Semiconductor Inc. + * Copyright 2012 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -39,12 +39,69 @@ model = "fsl,B4860QDS"; compatible = "fsl,B4860QDS"; + aliases { + phy_sgmii_1e = &phy_sgmii_1e; + phy_sgmii_1f = &phy_sgmii_1f; + phy_xaui_slot1 = &phy_xaui_slot1; + phy_xaui_slot2 = &phy_xaui_slot2; + }; + ifc: localbus@ffe124000 { board-control@3,0 { compatible = "fsl,b4860qds-fpga", "fsl,fpga-qixis"; }; }; + soc@ffe000000 { + fman@400000 { + ethernet@e8000 { + phy-handle = <&phy_sgmii_1e>; + phy-connection-type = "sgmii"; + }; + + ethernet@ea000 { + phy-handle = <&phy_sgmii_1f>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy_xaui_slot1>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { + phy-handle = <&phy_xaui_slot2>; + phy-connection-type = "xgmii"; + }; + + mdio@fc000 { + phy_sgmii_1e: ethernet-phy@1e { + reg = <0x1e>; + status = "disabled"; + }; + + phy_sgmii_1f: ethernet-phy@1f { + reg = <0x1f>; + status = "disabled"; + }; + }; + + mdio@fd000 { + phy_xaui_slot1: xaui-phy@slot1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x7>; + status = "disabled"; + }; + + phy_xaui_slot2: xaui-phy@slot2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x6>; + status = "disabled"; + }; + }; + }; + }; + rio: rapidio@ffe0c0000 { reg = <0xf 0xfe0c0000 0 0x11000>; @@ -55,7 +112,6 @@ ranges = <0 0 0xc 0x30000000 0 0x10000000>; }; }; - }; /include/ "b4860si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/b4qds.dtsi b/arch/powerpc/boot/dts/fsl/b4qds.dtsi index 64557742fb99..3785ef826d07 100644 --- a/arch/powerpc/boot/dts/fsl/b4qds.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4qds.dtsi @@ -1,7 +1,7 @@ /* * B4420DS Device Tree Source * - * Copyright 2012 - 2014 Freescale Semiconductor, Inc. + * Copyright 2012 - 2015 Freescale Semiconductor, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -39,6 +39,13 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases { + phy_sgmii_10 = &phy_sgmii_10; + phy_sgmii_11 = &phy_sgmii_11; + phy_sgmii_1c = &phy_sgmii_1c; + phy_sgmii_1d = &phy_sgmii_1d; + }; + ifc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x2000>; ranges = <0 0 0xf 0xe8000000 0x08000000 @@ -135,7 +142,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "sst,sst25wf040"; + compatible = "sst,sst25wf040", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; /* input clock */ }; @@ -210,6 +217,47 @@ phy_type = "ulpi"; }; + fman@400000 { + ethernet@e0000 { + phy-handle = <&phy_sgmii_10>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy_sgmii_11>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy_sgmii_1c>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy_sgmii_1d>; + phy-connection-type = "sgmii"; + }; + + mdio@fc000 { + phy_sgmii_10: ethernet-phy@10 { + reg = <0x10>; + }; + + phy_sgmii_11: ethernet-phy@11 { + reg = <0x11>; + }; + + phy_sgmii_1c: ethernet-phy@1c { + reg = <0x1c>; + status = "disabled"; + }; + + phy_sgmii_1d: ethernet-phy@1d { + reg = <0x1d>; + status = "disabled"; + }; + }; + }; }; pci0: pcie@ffe200000 { @@ -226,7 +274,6 @@ 0 0x00010000>; }; }; - }; /include/ "b4si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi index f4d96d277ed5..53f8b956340f 100644 --- a/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi @@ -53,7 +53,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; diff --git a/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi index 7a13bf2aa439..fead484a8180 100644 --- a/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi +++ b/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi @@ -55,7 +55,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <30000000>; }; diff --git a/arch/powerpc/boot/dts/fsl/c293pcie.dts b/arch/powerpc/boot/dts/fsl/c293pcie.dts index 53ab4db9e79c..66709788429d 100644 --- a/arch/powerpc/boot/dts/fsl/c293pcie.dts +++ b/arch/powerpc/boot/dts/fsl/c293pcie.dts @@ -167,7 +167,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; diff --git a/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts new file mode 100644 index 000000000000..0424fc2bd0e0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts @@ -0,0 +1,216 @@ +/* + * GE PPC9A Device Tree Source + * + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: SBS CM6 Device Tree Source + * Copyright 2007 SBS Technologies GmbH & Co. KG + * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source) + * Copyright 2006 Freescale Semiconductor Inc. + */ + +/* + * Compiled with dtc -I dts -O dtb -o gef_ppc9a.dtb gef_ppc9a.dts + */ + +/include/ "mpc8641si-pre.dtsi" + +/ { + model = "GEF_PPC9A"; + compatible = "gef,ppc9a"; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; // set by uboot + }; + + lbc: localbus@fef05000 { + reg = <0xfef05000 0x1000>; + + ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash + 1 0 0xe8000000 0x08000000 // Paged Flash 0 + 2 0 0xe0000000 0x08000000 // Paged Flash 1 + 3 0 0xfc100000 0x00020000 // NVRAM + 4 0 0xfc000000 0x00008000 // FPGA + 5 0 0xfc008000 0x00008000 // AFIX FPGA + 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit) + 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit) + + /* flash@0,0 is a mirror of part of the memory in flash@1,0 + flash@0,0 { + compatible = "gef,ppc9a-firmware-mirror", "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <4>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "firmware"; + reg = <0x0 0x1000000>; + read-only; + }; + }; + */ + + flash@1,0 { + compatible = "gef,ppc9a-paged-flash", "cfi-flash"; + reg = <0x1 0x0 0x8000000>; + bank-width = <4>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "user"; + reg = <0x0 0x7800000>; + }; + partition@7800000 { + label = "firmware"; + reg = <0x7800000 0x800000>; + read-only; + }; + }; + + nvram@3,0 { + device_type = "nvram"; + compatible = "simtek,stk14ca8"; + reg = <0x3 0x0 0x20000>; + }; + + fpga@4,0 { + compatible = "gef,ppc9a-fpga-regs"; + reg = <0x4 0x0 0x40>; + }; + + wdt@4,2000 { + compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x2000 0x8>; + interrupts = <0x1a 0x4>; + interrupt-parent = <&gef_pic>; + }; + /* Second watchdog available, driver currently supports one. + wdt@4,2010 { + compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x2010 0x8>; + interrupts = <0x1b 0x4>; + interrupt-parent = <&gef_pic>; + }; + */ + gef_pic: pic@4,4000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "gef,ppc9a-fpga-pic", "gef,fpga-pic-1.00"; + reg = <0x4 0x4000 0x20>; + interrupts = <0x8 0x9 0 0>; + + }; + gef_gpio: gpio@7,14000 { + #gpio-cells = <2>; + compatible = "gef,ppc9a-gpio", "gef,sbc610-gpio"; + reg = <0x7 0x14000 0x24>; + gpio-controller; + }; + }; + + soc: soc@fef00000 { + ranges = <0x0 0xfef00000 0x00100000>; + + i2c@3000 { + hwmon@48 { + compatible = "national,lm92"; + reg = <0x48>; + }; + + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + rtc@51 { + compatible = "epson,rx8581"; + reg = <0x00000051>; + }; + + eti@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "gmii"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0x9 0x4>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&gef_pic>; + interrupts = <0x8 0x4>; + reg = <3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "gmii"; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@25000 { + status = "disabled"; + }; + + mdio@25520 { + status = "disabled"; + }; + + enet3: ethernet@27000 { + status = "disabled"; + }; + + mdio@27520 { + status = "disabled"; + }; + }; + + pci0: pcie@fef08000 { + reg = <0xfef08000 0x1000>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 + 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; + + pcie@0 { + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00400000>; + }; + }; +}; + +/include/ "mpc8641si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc310.dts b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts new file mode 100644 index 000000000000..84b3d38f880e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts @@ -0,0 +1,260 @@ +/* + * GE SBC310 Device Tree Source + * + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: SBS CM6 Device Tree Source + * Copyright 2007 SBS Technologies GmbH & Co. KG + * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source) + * Copyright 2006 Freescale Semiconductor Inc. + */ + +/* + * Compiled with dtc -I dts -O dtb -o gef_sbc310.dtb gef_sbc310.dts + */ + +/include/ "mpc8641si-pre.dtsi" + +/ { + model = "GEF_SBC310"; + compatible = "gef,sbc310"; + + aliases { + pci1 = &pci1; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; // set by uboot + }; + + lbc: localbus@fef05000 { + reg = <0xfef05000 0x1000>; + + ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash + 1 0 0xe0000000 0x08000000 // Paged Flash 0 + 2 0 0xe8000000 0x08000000 // Paged Flash 1 + 3 0 0xfc100000 0x00020000 // NVRAM + 4 0 0xfc000000 0x00010000>; // FPGA + + /* flash@0,0 is a mirror of part of the memory in flash@1,0 + flash@0,0 { + compatible = "gef,sbc310-firmware-mirror", "cfi-flash"; + reg = <0x0 0x0 0x01000000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "firmware"; + reg = <0x0 0x01000000>; + read-only; + }; + }; + */ + + flash@1,0 { + compatible = "gef,sbc310-paged-flash", "cfi-flash"; + reg = <0x1 0x0 0x8000000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "user"; + reg = <0x0 0x7800000>; + }; + partition@7800000 { + label = "firmware"; + reg = <0x7800000 0x800000>; + read-only; + }; + }; + + nvram@3,0 { + device_type = "nvram"; + compatible = "simtek,stk14ca8"; + reg = <0x3 0x0 0x20000>; + }; + + fpga@4,0 { + compatible = "gef,fpga-regs"; + reg = <0x4 0x0 0x40>; + }; + + wdt@4,2000 { + compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x2000 0x8>; + interrupts = <0x1a 0x4>; + interrupt-parent = <&gef_pic>; + }; +/* + wdt@4,2010 { + compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x2010 0x8>; + interrupts = <0x1b 0x4>; + interrupt-parent = <&gef_pic>; + }; +*/ + gef_pic: pic@4,4000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic"; + reg = <0x4 0x4000 0x20>; + interrupts = <0x8 0x9 0 0>; + + }; + gef_gpio: gpio@4,8000 { + #gpio-cells = <2>; + compatible = "gef,sbc310-gpio"; + reg = <0x4 0x8000 0x24>; + gpio-controller; + }; + }; + + soc: soc@fef00000 { + ranges = <0x0 0xfef00000 0x00100000>; + + i2c@3000 { + rtc@51 { + compatible = "epson,rx8581"; + reg = <0x00000051>; + }; + }; + + i2c@3100 { + hwmon@48 { + compatible = "national,lm92"; + reg = <0x48>; + }; + + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + eti@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "gmii"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0x9 0x4>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&gef_pic>; + interrupts = <0x8 0x4>; + reg = <3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "gmii"; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@25000 { + status = "disabled"; + }; + + mdio@25520 { + status = "disabled"; + }; + + enet3: ethernet@27000 { + status = "disabled"; + }; + + mdio@27520 { + status = "disabled"; + }; + }; + + pci0: pcie@fef08000 { + reg = <0xfef08000 0x1000>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 + 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + 0x0000 0x0 0x0 0x1 &mpic 0x0 0x2 + 0x0000 0x0 0x0 0x2 &mpic 0x1 0x2 + 0x0000 0x0 0x0 0x3 &mpic 0x2 0x2 + 0x0000 0x0 0x0 0x4 &mpic 0x3 0x2 + >; + + pcie@0 { + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00400000>; + }; + }; + + pci1: pcie@fef09000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xfef09000 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>; + clock-frequency = <100000000>; + interrupts = <0x19 0x2 0 0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + 0x0000 0x0 0x0 0x1 &mpic 0x4 0x2 + 0x0000 0x0 0x0 0x2 &mpic 0x5 0x2 + 0x0000 0x0 0x0 0x3 &mpic 0x6 0x2 + 0x0000 0x0 0x0 0x4 &mpic 0x7 0x2 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xc0000000 + 0x02000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00400000>; + }; + }; +}; + +/include/ "mpc8641si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc610.dts b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts new file mode 100644 index 000000000000..974446acce23 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts @@ -0,0 +1,214 @@ +/* + * GE SBC610 Device Tree Source + * + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: SBS CM6 Device Tree Source + * Copyright 2007 SBS Technologies GmbH & Co. KG + * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source) + * Copyright 2006 Freescale Semiconductor Inc. + */ + +/* + * Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts + */ + +/include/ "mpc8641si-pre.dtsi" + +/ { + model = "GEF_SBC610"; + compatible = "gef,sbc610"; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; // set by uboot + }; + + lbc: localbus@fef05000 { + reg = <0xfef05000 0x1000>; + + ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash + 1 0 0xe8000000 0x08000000 // Paged Flash 0 + 2 0 0xe0000000 0x08000000 // Paged Flash 1 + 3 0 0xfc100000 0x00020000 // NVRAM + 4 0 0xfc000000 0x00008000 // FPGA + 5 0 0xfc008000 0x00008000 // AFIX FPGA + 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit) + 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit) + + /* flash@0,0 is a mirror of part of the memory in flash@1,0 + flash@0,0 { + compatible = "gef,sbc610-firmware-mirror", "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <4>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "firmware"; + reg = <0x0 0x1000000>; + read-only; + }; + }; + */ + + flash@1,0 { + compatible = "gef,sbc610-paged-flash", "cfi-flash"; + reg = <0x1 0x0 0x8000000>; + bank-width = <4>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "user"; + reg = <0x0 0x7800000>; + }; + partition@7800000 { + label = "firmware"; + reg = <0x7800000 0x800000>; + read-only; + }; + }; + + nvram@3,0 { + device_type = "nvram"; + compatible = "simtek,stk14ca8"; + reg = <0x3 0x0 0x20000>; + }; + + fpga@4,0 { + compatible = "gef,fpga-regs"; + reg = <0x4 0x0 0x40>; + }; + + wdt@4,2000 { + compatible = "gef,fpga-wdt"; + reg = <0x4 0x2000 0x8>; + interrupts = <0x1a 0x4>; + interrupt-parent = <&gef_pic>; + }; + /* Second watchdog available, driver currently supports one. + wdt@4,2010 { + compatible = "gef,fpga-wdt"; + reg = <0x4 0x2010 0x8>; + interrupts = <0x1b 0x4>; + interrupt-parent = <&gef_pic>; + }; + */ + gef_pic: pic@4,4000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "gef,fpga-pic"; + reg = <0x4 0x4000 0x20>; + interrupts = <0x8 0x9 0 0>; + + }; + gef_gpio: gpio@7,14000 { + #gpio-cells = <2>; + compatible = "gef,sbc610-gpio"; + reg = <0x7 0x14000 0x24>; + gpio-controller; + }; + }; + + soc: soc@fef00000 { + ranges = <0x0 0xfef00000 0x00100000>; + + i2c@3000 { + hwmon@48 { + compatible = "national,lm92"; + reg = <0x48>; + }; + + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + rtc@51 { + compatible = "epson,rx8581"; + reg = <0x00000051>; + }; + + eti@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "gmii"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0x9 0x4>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&gef_pic>; + interrupts = <0x8 0x4>; + reg = <3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "gmii"; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@25000 { + status = "disabled"; + }; + + mdio@25520 { + status = "disabled"; + }; + + enet3: ethernet@27000 { + status = "disabled"; + }; + + mdio@27520 { + status = "disabled"; + }; + }; + + pci0: pcie@fef08000 { + reg = <0xfef08000 0x1000>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 + 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; + + pcie@0 { + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00400000>; + }; + }; +}; + +/include/ "mpc8641si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/kmcoge4.dts b/arch/powerpc/boot/dts/fsl/kmcoge4.dts index 6858ec9ef295..2d4b64fcee88 100644 --- a/arch/powerpc/boot/dts/fsl/kmcoge4.dts +++ b/arch/powerpc/boot/dts/fsl/kmcoge4.dts @@ -63,7 +63,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl256s1"; + compatible = "spansion,s25fl256s1", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; /* input clock */ }; @@ -77,7 +77,7 @@ flash@2 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,m25p32"; + compatible = "micron,m25p32", "jedec,spi-nor"; reg = <2>; spi-max-frequency = <15000000>; }; diff --git a/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi index 937ad7e46119..a925fe49a73e 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi @@ -142,7 +142,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; partition@u-boot { @@ -166,17 +166,17 @@ }; }; flash@1 { - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <1>; spi-max-frequency = <40000000>; }; flash@2 { - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <2>; spi-max-frequency = <40000000>; }; flash@3 { - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <3>; spi-max-frequency = <40000000>; }; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts index 1c03060dd0b8..554001f2e96a 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts @@ -9,65 +9,23 @@ * option) any later version. */ -/dts-v1/; +/include/ "mpc8641si-pre.dtsi" / { model = "MPC8641HPCN"; compatible = "fsl,mpc8641hpcn"; - #address-cells = <1>; - #size-cells = <1>; aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - ethernet3 = &enet3; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; pci1 = &pci1; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8641@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <32768>; // L1 - i-cache-size = <32768>; // L1 - timebase-frequency = <0>; // From uboot - bus-frequency = <0>; // From uboot - clock-frequency = <0>; // From uboot - }; - PowerPC,8641@1 { - device_type = "cpu"; - reg = <1>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <32768>; - i-cache-size = <32768>; - timebase-frequency = <0>; // From uboot - bus-frequency = <0>; // From uboot - clock-frequency = <0>; // From uboot - }; - }; - memory { device_type = "memory"; reg = <0x00000000 0x40000000>; // 1G at 0x0 }; - localbus@ffe05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8641-localbus", "simple-bus"; + lbc: localbus@ffe05000 { reg = <0xffe05000 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; ranges = <0 0 0xef800000 0x00800000 2 0 0xffdf8000 0x00008000 @@ -101,253 +59,75 @@ }; }; - soc8641@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; + soc: soc8641@ffe00000 { ranges = <0x00000000 0xffe00000 0x00100000>; - bus-frequency = <0>; - - mcm-law@0 { - compatible = "fsl,mcm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - mcm@1000 { - compatible = "fsl,mpc8641-mcm", "fsl,mcm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; }; - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <10 1 0 0>; + reg = <0>; }; - dma-channel@80 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; + phy1: ethernet-phy@1 { + interrupts = <10 1 0 0>; + reg = <1>; }; - dma-channel@100 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; + phy2: ethernet-phy@2 { + interrupts = <10 1 0 0>; + reg = <2>; }; - dma-channel@180 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; + phy3: ethernet-phy@3 { + interrupts = <10 1 0 0>; + reg = <3>; }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <2>; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <3>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; + }; - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; enet2: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi2>; phy-handle = <&phy2>; phy-connection-type = "rgmii-id"; + }; - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; enet3: ethernet@27000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <3>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x27000 0x1000>; - ranges = <0x0 0x27000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <37 2 38 2 39 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi3>; phy-handle = <&phy3>; phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; }; - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <28 2>; - interrupt-parent = <&mpic>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; rmu: rmu@d3000 { @@ -361,50 +141,35 @@ compatible = "fsl,srio-msg-unit"; reg = <0x0 0x100>; interrupts = < - 53 2 /* msg1_tx_irq */ - 54 2>;/* msg1_rx_irq */ + 53 2 0 0 /* msg1_tx_irq */ + 54 2 0 0>;/* msg1_rx_irq */ }; message-unit@100 { compatible = "fsl,srio-msg-unit"; reg = <0x100 0x100>; interrupts = < - 55 2 /* msg2_tx_irq */ - 56 2>;/* msg2_rx_irq */ + 55 2 0 0 /* msg2_tx_irq */ + 56 2 0 0>;/* msg2_rx_irq */ }; doorbell-unit@400 { compatible = "fsl,srio-dbell-unit"; reg = <0x400 0x80>; interrupts = < - 49 2 /* bell_outb_irq */ - 50 2>;/* bell_inb_irq */ + 49 2 0 0 /* bell_outb_irq */ + 50 2 0 0>;/* bell_inb_irq */ }; port-write-unit@4e0 { compatible = "fsl,srio-port-write-unit"; reg = <0x4e0 0x20>; - interrupts = <48 2>; + interrupts = <48 2 0 0>; }; }; - - global-utilities@e0000 { - compatible = "fsl,mpc8641-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; }; pci0: pcie@ffe08000 { - compatible = "fsl,mpc8641-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0xffe08000 0x1000>; - bus-range = <0x0 0xff>; ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; interrupt-map-mask = <0xff00 0 0 7>; interrupt-map = < /* IDSEL 0x11 func 0 - PCI slot 1 */ @@ -522,10 +287,6 @@ >; pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x02000000 0x0 0x80000000 0x02000000 0x0 0x80000000 0x0 0x20000000 @@ -545,7 +306,6 @@ 0x0 0x00010000>; isa@1e { device_type = "isa"; - #interrupt-cells = <2>; #size-cells = <1>; #address-cells = <2>; reg = <0xf000 0 0 0 0>; @@ -562,8 +322,7 @@ #address-cells = <0>; #interrupt-cells = <2>; compatible = "chrp,iic"; - interrupts = <9 2>; - interrupt-parent = <&mpic>; + interrupts = <9 2 0 0>; }; i8042@60 { @@ -571,8 +330,7 @@ #address-cells = <1>; reg = <1 0x60 1 1 0x64 1>; interrupts = <1 3 12 3>; - interrupt-parent = - <&i8259>; + interrupt-parent = <&i8259>; keyboard@0 { reg = <0>; @@ -603,16 +361,14 @@ pci1: pcie@ffe09000 { compatible = "fsl,mpc8641-pcie"; device_type = "pci"; - #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <0xffe09000 0x1000>; bus-range = <0 0xff>; ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; + clock-frequency = <100000000>; + interrupts = <25 2 0 0>; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ @@ -644,8 +400,7 @@ rapidio@ffec0000 { reg = <0xffec0000 0x11000>; compatible = "fsl,srio"; - interrupt-parent = <&mpic>; - interrupts = <48 2>; + interrupts = <48 2 0 0>; #address-cells = <2>; #size-cells = <2>; fsl,srio-rmu-handle = <&rmu>; @@ -661,3 +416,5 @@ */ }; + +/include/ "mpc8641si-post.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts index bb575e28042a..fec58671a6d6 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts +++ b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts @@ -9,7 +9,7 @@ * option) any later version. */ -/dts-v1/; +/include/ "mpc8641si-pre.dtsi" / { model = "MPC8641HPCN"; @@ -18,56 +18,16 @@ #size-cells = <2>; aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - ethernet3 = &enet3; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; pci1 = &pci1; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8641@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <32768>; // L1, 32K - i-cache-size = <32768>; // L1, 32K - timebase-frequency = <0>; // 33 MHz, from uboot - bus-frequency = <0>; // From uboot - clock-frequency = <0>; // From uboot - }; - PowerPC,8641@1 { - device_type = "cpu"; - reg = <1>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <32768>; // L1, 32K - i-cache-size = <32768>; // L1, 32K - timebase-frequency = <0>; // 33 MHz, from uboot - bus-frequency = <0>; // From uboot - clock-frequency = <0>; // From uboot - }; - }; - memory { device_type = "memory"; reg = <0x0 0x00000000 0x0 0x40000000>; // 1G at 0x0 }; - localbus@fffe05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8641-localbus", "simple-bus"; + lbc: localbus@fffe05000 { reg = <0x0f 0xffe05000 0x0 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; ranges = <0 0 0xf 0xef800000 0x00800000 2 0 0xf 0xffdf8000 0x00008000 @@ -101,276 +61,82 @@ }; }; - soc8641@fffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; + soc: soc8641@fffe00000 { ranges = <0x00000000 0x0f 0xffe00000 0x00100000>; - bus-frequency = <0>; - mcm-law@0 { - compatible = "fsl,mcm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - mcm@1000 { - compatible = "fsl,mpc8641-mcm", "fsl,mcm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; }; - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <10 1 0 0>; + reg = <0>; }; - dma-channel@80 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; + phy1: ethernet-phy@1 { + interrupts = <10 1 0 0>; + reg = <1>; }; - dma-channel@100 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; + phy2: ethernet-phy@2 { + interrupts = <10 1 0 0>; + reg = <2>; }; - dma-channel@180 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; + phy3: ethernet-phy@3 { + interrupts = <10 1 0 0>; + reg = <3>; }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <2>; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <3>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; + }; - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; enet2: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi2>; phy-handle = <&phy2>; phy-connection-type = "rgmii-id"; + }; - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; }; }; enet3: ethernet@27000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <3>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x27000 0x1000>; - ranges = <0x0 0x27000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <37 2 38 2 39 2>; - interrupt-parent = <&mpic>; tbi-handle = <&tbi3>; phy-handle = <&phy3>; phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; }; - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <28 2>; - interrupt-parent = <&mpic>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - global-utilities@e0000 { - compatible = "fsl,mpc8641-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; }; pci0: pcie@fffe08000 { - cell-index = <0>; - compatible = "fsl,mpc8641-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; reg = <0x0f 0xffe08000 0x0 0x1000>; - bus-range = <0x0 0xff>; ranges = <0x02000000 0x0 0xe0000000 0x0c 0x00000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0x0f 0xffc00000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; interrupt-map-mask = <0xff00 0 0 7>; interrupt-map = < /* IDSEL 0x11 func 0 - PCI slot 1 */ @@ -488,10 +254,6 @@ >; pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x02000000 0x0 0xe0000000 0x02000000 0x0 0xe0000000 0x0 0x20000000 @@ -511,7 +273,6 @@ 0x0 0x00010000>; isa@1e { device_type = "isa"; - #interrupt-cells = <2>; #size-cells = <1>; #address-cells = <2>; reg = <0xf000 0 0 0 0>; @@ -528,8 +289,7 @@ #address-cells = <0>; #interrupt-cells = <2>; compatible = "chrp,iic"; - interrupts = <9 2>; - interrupt-parent = <&mpic>; + interrupts = <9 2 0 0>; }; i8042@60 { @@ -537,8 +297,7 @@ #address-cells = <1>; reg = <1 0x60 1 1 0x64 1>; interrupts = <1 3 12 3>; - interrupt-parent = - <&i8259>; + interrupt-parent = <&i8259>; keyboard@0 { reg = <0>; @@ -567,19 +326,16 @@ }; pci1: pcie@fffe09000 { - cell-index = <1>; compatible = "fsl,mpc8641-pcie"; device_type = "pci"; - #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <0x0f 0xffe09000 0x0 0x1000>; bus-range = <0x0 0xff>; ranges = <0x02000000 0x0 0xe0000000 0x0c 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0x0f 0xffc10000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; + clock-frequency = <100000000>; + interrupts = <25 2 0 0>; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ @@ -603,3 +359,5 @@ }; }; }; + +/include/ "mpc8641si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi new file mode 100644 index 000000000000..70889d8e8850 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi @@ -0,0 +1,120 @@ +/* + * MPC8641 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8641-localbus", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8641-soc", "simple-bus"; + bus-frequency = <0>; + + mcm-law@0 { + compatible = "fsl,mcm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + mcm@1000 { + compatible = "fsl,mpc8641-mcm", "fsl,mcm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + serial@4600 { + interrupts = <28 2 0 0>; + }; +/include/ "pq3-dma-0.dtsi" + dma@21300 { + compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; + }; + dma-channel@0 { + compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; + }; + dma-channel@80 { + compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; + }; + dma-channel@100 { + compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; + }; + dma-channel@180 { + compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; + }; + +/include/ "pq3-etsec1-0.dtsi" + ethernet@24000 { + model = "TSEC"; + }; +/include/ "pq3-etsec1-1.dtsi" + ethernet@25000 { + model = "TSEC"; + }; +/include/ "pq3-etsec1-2.dtsi" + ethernet@26000 { + model = "TSEC"; + }; +/include/ "pq3-etsec1-3.dtsi" + ethernet@27000 { + model = "TSEC"; + }; + +/include/ "qoriq-mpic.dtsi" + msi@41600 { + compatible = "fsl,mpc8641-msi", "fsl,mpic-msi"; + }; + msi@41800 { + compatible = "fsl,mpc8641-msi", "fsl,mpic-msi"; + }; + msi@41a00 { + compatible = "fsl,mpc8641-msi", "fsl,mpic-msi"; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8641-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; + +&pci0 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <100000000>; + interrupts = <24 2 0 0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + + interrupt-map = < + 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi new file mode 100644 index 000000000000..9e03328561d3 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi @@ -0,0 +1,58 @@ +/* + * MPC8641 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpic>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8641@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + + PowerPC,8641@1 { + device_type = "cpu"; + reg = <1>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mvme2500.dts b/arch/powerpc/boot/dts/fsl/mvme2500.dts index c7bc1a0c7194..69559e970e99 100644 --- a/arch/powerpc/boot/dts/fsl/mvme2500.dts +++ b/arch/powerpc/boot/dts/fsl/mvme2500.dts @@ -70,12 +70,12 @@ fsl,espi-num-chipselects = <2>; flash@0 { - compatible = "atmel,at25df641"; + compatible = "atmel,at25df641", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; }; flash@1 { - compatible = "atmel,at25df641"; + compatible = "atmel,at25df641", "jedec,spi-nor"; reg = <1>; spi-max-frequency = <10000000>; }; diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi index 14b629505038..a8e4ba070104 100644 --- a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi @@ -110,7 +110,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi index c952cd37cf6d..25f81eea60e0 100644 --- a/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi @@ -151,7 +151,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; /* input clock */ diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts index 740553c090a3..f2dc6c09be52 100644 --- a/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts +++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts @@ -155,7 +155,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <0>; /* input clock */ spi-max-frequency = <40000000>; diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi index 1fb7e0e0940f..703142ee6627 100644 --- a/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi @@ -148,7 +148,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; /* input clock */ diff --git a/arch/powerpc/boot/dts/fsl/p1021mds.dts b/arch/powerpc/boot/dts/fsl/p1021mds.dts index 27fdfd7dc7c7..291454c75dda 100644 --- a/arch/powerpc/boot/dts/fsl/p1021mds.dts +++ b/arch/powerpc/boot/dts/fsl/p1021mds.dts @@ -123,7 +123,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; /* input clock */ diff --git a/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi index e8a0f95fb24a..18f9b31602d0 100644 --- a/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi @@ -150,7 +150,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; /* input clock */ diff --git a/arch/powerpc/boot/dts/fsl/p1022ds.dtsi b/arch/powerpc/boot/dts/fsl/p1022ds.dtsi index 149da0f123ee..ddefbf64f7f8 100644 --- a/arch/powerpc/boot/dts/fsl/p1022ds.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1022ds.dtsi @@ -160,7 +160,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; /* input clock */ diff --git a/arch/powerpc/boot/dts/fsl/p1022rdk.dts b/arch/powerpc/boot/dts/fsl/p1022rdk.dts index 04c16337268a..d505d7c51903 100644 --- a/arch/powerpc/boot/dts/fsl/p1022rdk.dts +++ b/arch/powerpc/boot/dts/fsl/p1022rdk.dts @@ -86,7 +86,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,m25p80"; + compatible = "spansion,m25p80", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <1000000>; partition@0 { diff --git a/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi index b05dcb40f800..b4d05867f707 100644 --- a/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi @@ -129,7 +129,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,m25p80"; + compatible = "spansion,m25p80", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; diff --git a/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi index f50256482297..d44bb12debb0 100644 --- a/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi @@ -137,7 +137,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; /* input clock */ diff --git a/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi index ad2e242365cc..03c9afc82436 100644 --- a/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi @@ -151,7 +151,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,m25p80"; + compatible = "spansion,m25p80", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; diff --git a/arch/powerpc/boot/dts/fsl/p2020rdb.dts b/arch/powerpc/boot/dts/fsl/p2020rdb.dts index 70cf09019ce5..435a319958cb 100644 --- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts +++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts @@ -155,7 +155,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; diff --git a/arch/powerpc/boot/dts/fsl/p2041rdb.dts b/arch/powerpc/boot/dts/fsl/p2041rdb.dts index e9bd89406c4c..e50fea95a853 100644 --- a/arch/powerpc/boot/dts/fsl/p2041rdb.dts +++ b/arch/powerpc/boot/dts/fsl/p2041rdb.dts @@ -1,7 +1,7 @@ /* * P2041RDB Device Tree Source * - * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * Copyright 2011 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -41,6 +41,19 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases { + phy_rgmii_0 = &phy_rgmii_0; + phy_rgmii_1 = &phy_rgmii_1; + phy_sgmii_2 = &phy_sgmii_2; + phy_sgmii_3 = &phy_sgmii_3; + phy_sgmii_4 = &phy_sgmii_4; + phy_sgmii_1c = &phy_sgmii_1c; + phy_sgmii_1d = &phy_sgmii_1d; + phy_sgmii_1e = &phy_sgmii_1e; + phy_sgmii_1f = &phy_sgmii_1f; + phy_xgmii_2 = &phy_xgmii_2; + }; + memory { device_type = "memory"; }; @@ -83,7 +96,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; /* input clock */ partition@u-boot { @@ -137,6 +150,83 @@ usb1: usb@211000 { dr_mode = "host"; }; + + fman@400000 { + ethernet@e0000 { + phy-handle = <&phy_sgmii_2>; + phy-connection-type = "sgmii"; + }; + + mdio@e1120 { + phy_rgmii_0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy_rgmii_1: ethernet-phy@1 { + reg = <0x1>; + }; + + phy_sgmii_2: ethernet-phy@2 { + reg = <0x2>; + }; + + phy_sgmii_3: ethernet-phy@3 { + reg = <0x3>; + }; + + phy_sgmii_4: ethernet-phy@4 { + reg = <0x4>; + }; + + phy_sgmii_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + ethernet@e2000 { + phy-handle = <&phy_sgmii_3>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy_sgmii_4>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_rgmii_0>; + phy-connection-type = "rgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy_xgmii_2>; + phy-connection-type = "xgmii"; + }; + + mdio@f1000 { + phy_xgmii_2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + }; + }; }; rio: rapidio@ffe0c0000 { diff --git a/arch/powerpc/boot/dts/fsl/p3041ds.dts b/arch/powerpc/boot/dts/fsl/p3041ds.dts index f2b1d40334d4..40748e415adb 100644 --- a/arch/powerpc/boot/dts/fsl/p3041ds.dts +++ b/arch/powerpc/boot/dts/fsl/p3041ds.dts @@ -1,7 +1,7 @@ /* * P3041DS Device Tree Source * - * Copyright 2010 - 2014 Freescale Semiconductor Inc. + * Copyright 2010 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -41,6 +41,20 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases{ + phy_rgmii_0 = &phy_rgmii_0; + phy_rgmii_1 = &phy_rgmii_1; + phy_sgmii_1c = &phy_sgmii_1c; + phy_sgmii_1d = &phy_sgmii_1d; + phy_sgmii_1e = &phy_sgmii_1e; + phy_sgmii_1f = &phy_sgmii_1f; + phy_xgmii_1 = &phy_xgmii_1; + phy_xgmii_2 = &phy_xgmii_2; + emi1_rgmii = &hydra_mdio_rgmii; + emi1_sgmii = &hydra_mdio_sgmii; + emi2_xgmii = &hydra_mdio_xgmii; + }; + memory { device_type = "memory"; }; @@ -83,7 +97,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <35000000>; /* input clock */ partition@u-boot { @@ -150,6 +164,52 @@ reg = <0x4c>; }; }; + + fman@400000{ + ethernet@e0000 { + phy-handle = <&phy_sgmii_1c>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy_sgmii_1d>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy_sgmii_1e>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy_sgmii_1f>; + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy_xgmii_1>; + phy-connection-type = "xgmii"; + }; + + hydra_mdio_xgmii: mdio@f1000 { + status = "disabled"; + + phy_xgmii_1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x4>; + }; + + phy_xgmii_2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + }; + }; }; rio: rapidio@ffe0c0000 { @@ -215,8 +275,58 @@ }; board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis"; reg = <3 0 0x30>; + ranges = <0 3 0 0x30>; + + mdio-mux-emi1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + reg = <9 1>; + mux-mask = <0x78>; + + hydra_mdio_rgmii: rgmii-mdio@8 { + #address-cells = <1>; + #size-cells = <0>; + reg = <8>; + status = "disabled"; + + phy_rgmii_0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy_rgmii_1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + hydra_mdio_sgmii: sgmii-mdio@28 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x28>; + status = "disabled"; + + phy_sgmii_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/p4080ds.dts b/arch/powerpc/boot/dts/fsl/p4080ds.dts index 28a55c5e7099..816b9788d5f6 100644 --- a/arch/powerpc/boot/dts/fsl/p4080ds.dts +++ b/arch/powerpc/boot/dts/fsl/p4080ds.dts @@ -1,7 +1,7 @@ /* * P4080DS Device Tree Source * - * Copyright 2009 - 2014 Freescale Semiconductor Inc. + * Copyright 2009 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -41,6 +41,20 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases { + phy_rgmii = &phyrgmii; + phy5_slot3 = &phy5slot3; + phy6_slot3 = &phy6slot3; + phy7_slot3 = &phy7slot3; + phy8_slot3 = &phy8slot3; + emi1_slot3 = &p4080mdio2; + emi1_slot4 = &p4080mdio1; + emi1_slot5 = &p4080mdio3; + emi1_rgmii = &p4080mdio0; + emi2_slot4 = &p4080xmdio1; + emi2_slot5 = &p4080xmdio3; + }; + memory { device_type = "memory"; }; @@ -84,7 +98,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; /* input clock */ partition@u-boot { @@ -137,6 +151,60 @@ dr_mode = "host"; phy_type = "ulpi"; }; + + fman@400000 { + ethernet@e0000 { + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy2>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy3>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy10>; + phy-connection-type = "xgmii"; + }; + }; + + fman@500000 { + ethernet@e0000 { + phy-handle = <&phy5>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy6>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy7>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy8>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy11>; + phy-connection-type = "xgmii"; + }; + }; }; rio: rapidio@ffe0c0000 { @@ -213,6 +281,120 @@ }; }; + mdio-mux-emi1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-gpio", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + gpios = <&gpio0 1 0>, <&gpio0 0 0>; + + p4080mdio0: mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + phyrgmii: ethernet-phy@0 { + reg = <0x0>; + }; + }; + + p4080mdio1: mdio@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + phy5: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy6: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy7: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy8: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + p4080mdio2: mdio@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + status = "disabled"; + + phy5slot3: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy6slot3: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy7slot3: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy8slot3: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + p4080mdio3: mdio@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + phy0: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy1: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy2: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy3: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; + + mdio-mux-emi2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-gpio", "mdio-mux"; + mdio-parent-bus = <&xmdio0>; + gpios = <&gpio0 3 0>, <&gpio0 2 0>; + + p4080xmdio1: mdio@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + phy11: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + }; + + p4080xmdio3: mdio@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + phy10: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x4>; + }; + }; + }; }; /include/ "p4080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p5020ds.dts b/arch/powerpc/boot/dts/fsl/p5020ds.dts index 920dc77b9c43..cd6f37386111 100644 --- a/arch/powerpc/boot/dts/fsl/p5020ds.dts +++ b/arch/powerpc/boot/dts/fsl/p5020ds.dts @@ -1,7 +1,7 @@ /* * P5020DS Device Tree Source * - * Copyright 2010 - 2014 Freescale Semiconductor Inc. + * Copyright 2010 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -41,6 +41,20 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases { + phy_rgmii_0 = &phy_rgmii_0; + phy_rgmii_1 = &phy_rgmii_1; + phy_sgmii_1c = &phy_sgmii_1c; + phy_sgmii_1d = &phy_sgmii_1d; + phy_sgmii_1e = &phy_sgmii_1e; + phy_sgmii_1f = &phy_sgmii_1f; + phy_xgmii_1 = &phy_xgmii_1; + phy_xgmii_2 = &phy_xgmii_2; + emi1_rgmii = &hydra_mdio_rgmii; + emi1_sgmii = &hydra_mdio_sgmii; + emi2_xgmii = &hydra_mdio_xgmii; + }; + memory { device_type = "memory"; }; @@ -83,7 +97,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; /* input clock */ partition@u-boot { @@ -150,6 +164,52 @@ reg = <0x4c>; }; }; + + fman@400000 { + ethernet@e0000 { + phy-handle = <&phy_sgmii_1c>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy_sgmii_1d>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy_sgmii_1e>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy_sgmii_1f>; + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy_xgmii_1>; + phy-connection-type = "xgmii"; + }; + + hydra_mdio_xgmii: mdio@f1000 { + status = "disabled"; + + phy_xgmii_1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x4>; + }; + + phy_xgmii_2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + }; + }; }; rio: rapidio@ffe0c0000 { @@ -215,8 +275,58 @@ }; board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis"; reg = <3 0 0x30>; + ranges = <0 3 0 0x30>; + + mdio-mux-emi1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + reg = <9 1>; + mux-mask = <0x78>; + + hydra_mdio_rgmii: rgmii-mdio@8 { + #address-cells = <1>; + #size-cells = <0>; + reg = <8>; + status = "disabled"; + + phy_rgmii_0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy_rgmii_1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + hydra_mdio_sgmii: sgmii-mdio@28 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x28>; + status = "disabled"; + + phy_sgmii_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/p5040ds.dts b/arch/powerpc/boot/dts/fsl/p5040ds.dts index e169cc297ea3..45084738cf4e 100644 --- a/arch/powerpc/boot/dts/fsl/p5040ds.dts +++ b/arch/powerpc/boot/dts/fsl/p5040ds.dts @@ -1,7 +1,7 @@ /* * P5040DS Device Tree Source * - * Copyright 2012 - 2014 Freescale Semiconductor Inc. + * Copyright 2012 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -41,6 +41,32 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases{ + phy_sgmii_slot2_1c = &phy_sgmii_slot2_1c; + phy_sgmii_slot2_1d = &phy_sgmii_slot2_1d; + phy_sgmii_slot2_1e = &phy_sgmii_slot2_1e; + phy_sgmii_slot2_1f = &phy_sgmii_slot2_1f; + phy_sgmii_slot3_1c = &phy_sgmii_slot3_1c; + phy_sgmii_slot3_1d = &phy_sgmii_slot3_1d; + phy_sgmii_slot3_1e = &phy_sgmii_slot3_1e; + phy_sgmii_slot3_1f = &phy_sgmii_slot3_1f; + phy_sgmii_slot5_1c = &phy_sgmii_slot5_1c; + phy_sgmii_slot5_1d = &phy_sgmii_slot5_1d; + phy_sgmii_slot5_1e = &phy_sgmii_slot5_1e; + phy_sgmii_slot5_1f = &phy_sgmii_slot5_1f; + phy_sgmii_slot6_1c = &phy_sgmii_slot6_1c; + phy_sgmii_slot6_1d = &phy_sgmii_slot6_1d; + phy_sgmii_slot6_1e = &phy_sgmii_slot6_1e; + phy_sgmii_slot6_1f = &phy_sgmii_slot6_1f; + hydra_rg = &hydra_rg; + hydra_sg_slot2 = &hydra_sg_slot2; + hydra_sg_slot3 = &hydra_sg_slot3; + hydra_sg_slot5 = &hydra_sg_slot5; + hydra_sg_slot6 = &hydra_sg_slot6; + hydra_xg_slot1 = &hydra_xg_slot1; + hydra_xg_slot2 = &hydra_xg_slot2; + }; + memory { device_type = "memory"; }; @@ -83,7 +109,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25sl12801"; + compatible = "spansion,s25sl12801", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; /* input clock */ partition@u-boot { @@ -147,6 +173,62 @@ reg = <0x4c>; }; }; + + fman@400000 { + ethernet@e0000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_rgmii_0>; + phy-connection-type = "rgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy_xgmii_slot_2>; + phy-connection-type = "xgmii"; + }; + }; + + fman@500000 { + ethernet@e0000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy_xgmii_slot_1>; + phy-connection-type = "xgmii"; + }; + }; }; lbc: localbus@ffe124000 { @@ -200,8 +282,158 @@ }; board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,p5040ds-fpga", "fsl,fpga-ngpixis"; reg = <3 0 0x40>; + ranges = <0 3 0 0x40>; + + mdio-mux-emi1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + reg = <9 1>; + mux-mask = <0x78>; + + hydra_rg:rgmii-mdio@8 { + #address-cells = <1>; + #size-cells = <0>; + reg = <8>; + status = "disabled"; + + phy_rgmii_0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy_rgmii_1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + hydra_sg_slot2: sgmii-mdio@28 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x28>; + status = "disabled"; + + phy_sgmii_slot2_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_slot2_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_slot2_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_slot2_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + hydra_sg_slot3: sgmii-mdio@68 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x68>; + status = "disabled"; + + phy_sgmii_slot3_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_slot3_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_slot3_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_slot3_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + hydra_sg_slot5: sgmii-mdio@38 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x38>; + status = "disabled"; + + phy_sgmii_slot5_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_slot5_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_slot5_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_slot5_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + hydra_sg_slot6: sgmii-mdio@48 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x48>; + status = "disabled"; + + phy_sgmii_slot6_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_slot6_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_slot6_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_slot6_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; + + mdio-mux-emi2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&xmdio0>; + reg = <9 1>; + mux-mask = <0x06>; + + hydra_xg_slot1: hydra-xg-slot1@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + status = "disabled"; + + phy_xgmii_slot_1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <4>; + }; + }; + + hydra_xg_slot2: hydra-xg-slot2@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + phy_xgmii_slot_2: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; + }; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi index 2f227b1345ad..e2bd9313e632 100644 --- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi @@ -420,6 +420,7 @@ fsl,iommu-parent = <&pamu4>; }; +/include/ "qoriq-raid1.0-0.dtsi" /include/ "qoriq-qman1.dtsi" /include/ "qoriq-bman1.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi index 0659d5bb69b8..dbd57750fc02 100644 --- a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi @@ -73,6 +73,12 @@ rtic_d = &rtic_d; sec_mon = &sec_mon; + raideng = &raideng; + raideng_jr0 = &raideng_jr0; + raideng_jr1 = &raideng_jr1; + raideng_jr2 = &raideng_jr2; + raideng_jr3 = &raideng_jr3; + fman0 = &fman0; fman1 = &fman1; ethernet0 = &enet0; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi index 2e441fab6d8f..e1a961f05dcd 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi @@ -55,6 +55,7 @@ fman@400000 { reg = <0xe0000 0x1000>; fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy0>; }; mdio@e1000 { @@ -62,5 +63,9 @@ fman@400000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe1000 0x1000>; + + pcsphy0: ethernet-phy@0 { + reg = <0x0>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi index 0b8f87f79d15..c288f3c6c637 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi @@ -52,6 +52,7 @@ fman@400000 { compatible = "fsl,fman-memac"; reg = <0xf0000 0x1000>; fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>; + pcsphy-handle = <&pcsphy6>; }; mdio@f1000 { @@ -59,5 +60,9 @@ fman@400000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xf1000 0x1000>; + + pcsphy6: ethernet-phy@0 { + reg = <0x0>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi index ba6f2275d3f6..94f3e7175012 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi @@ -55,6 +55,7 @@ fman@400000 { reg = <0xe2000 0x1000>; fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>; ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy1>; }; mdio@e3000 { @@ -62,5 +63,9 @@ fman@400000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe3000 0x1000>; + + pcsphy1: ethernet-phy@0 { + reg = <0x0>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi index 886003805592..94a76982d214 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi @@ -52,6 +52,7 @@ fman@400000 { compatible = "fsl,fman-memac"; reg = <0xf2000 0x1000>; fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>; + pcsphy-handle = <&pcsphy7>; }; mdio@f3000 { @@ -59,5 +60,9 @@ fman@400000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xf3000 0x1000>; + + pcsphy7: ethernet-phy@0 { + reg = <0x0>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi index ace9c13648ce..b5ff5f71c6b8 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi @@ -51,6 +51,7 @@ fman@400000 { reg = <0xe0000 0x1000>; fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy0>; }; mdio@e1000 { @@ -58,5 +59,9 @@ fman@400000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe1000 0x1000>; + + pcsphy0: ethernet-phy@0 { + reg = <0x0>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi index a4fc28654b31..ee44182c6348 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi @@ -51,6 +51,7 @@ fman@400000 { reg = <0xe2000 0x1000>; fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>; ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy1>; }; mdio@e3000 { @@ -58,5 +59,9 @@ fman@400000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe3000 0x1000>; + + pcsphy1: ethernet-phy@0 { + reg = <0x0>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi index 78596faadf99..f05f0d775039 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi @@ -51,6 +51,7 @@ fman@400000 { reg = <0xe4000 0x1000>; fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>; ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy2>; }; mdio@e5000 { @@ -58,5 +59,9 @@ fman@400000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe5000 0x1000>; + + pcsphy2: ethernet-phy@0 { + reg = <0x0>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi index af93abd86d78..a9114ec51075 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi @@ -51,6 +51,7 @@ fman@400000 { reg = <0xe6000 0x1000>; fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>; ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy3>; }; mdio@e7000 { @@ -58,5 +59,9 @@ fman@400000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe7000 0x1000>; + + pcsphy3: ethernet-phy@0 { + reg = <0x0>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi index 97cffd74bf3d..44dd00ac7367 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi @@ -51,6 +51,7 @@ fman@400000 { reg = <0xe8000 0x1000>; fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>; ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy4>; }; mdio@e9000 { @@ -58,5 +59,9 @@ fman@400000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe9000 0x1000>; + + pcsphy4: ethernet-phy@0 { + reg = <0x0>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi index 232c5c277bdb..5b1b84b58602 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi @@ -51,6 +51,7 @@ fman@400000 { reg = <0xea000 0x1000>; fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>; ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy5>; }; mdio@eb000 { @@ -58,5 +59,9 @@ fman@400000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xeb000 0x1000>; + + pcsphy5: ethernet-phy@0 { + reg = <0x0>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi index 89d64ee282b0..0e1daaef9e74 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi @@ -52,6 +52,7 @@ fman@500000 { compatible = "fsl,fman-memac"; reg = <0xf0000 0x1000>; fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>; + pcsphy-handle = <&pcsphy14>; }; mdio@f1000 { @@ -59,5 +60,9 @@ fman@500000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xf1000 0x1000>; + + pcsphy14: ethernet-phy@0 { + reg = <0x0>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi index 7fa9260889c6..68c5ef779266 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi @@ -52,6 +52,7 @@ fman@500000 { compatible = "fsl,fman-memac"; reg = <0xf2000 0x1000>; fsl,fman-ports = <&fman1_rx_0x11 &fman1_tx_0x31>; + pcsphy-handle = <&pcsphy15>; }; mdio@f3000 { @@ -59,5 +60,9 @@ fman@500000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xf3000 0x1000>; + + pcsphy15: ethernet-phy@0 { + reg = <0x0>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi index 3d236662bf07..605363cc1117 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi @@ -51,6 +51,7 @@ fman@500000 { reg = <0xe0000 0x1000>; fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>; ptp-timer = <&ptp_timer1>; + pcsphy-handle = <&pcsphy8>; }; mdio@e1000 { @@ -58,5 +59,9 @@ fman@500000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe1000 0x1000>; + + pcsphy8: ethernet-phy@0 { + reg = <0x0>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi index 97dc2eedd462..1955dfa13634 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi @@ -51,6 +51,7 @@ fman@500000 { reg = <0xe2000 0x1000>; fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>; ptp-timer = <&ptp_timer1>; + pcsphy-handle = <&pcsphy9>; }; mdio@e3000 { @@ -58,5 +59,9 @@ fman@500000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe3000 0x1000>; + + pcsphy9: ethernet-phy@0 { + reg = <0x0>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi index f084dd2f0bec..2c1476454ee0 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi @@ -51,6 +51,7 @@ fman@500000 { reg = <0xe4000 0x1000>; fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>; ptp-timer = <&ptp_timer1>; + pcsphy-handle = <&pcsphy10>; }; mdio@e5000 { @@ -58,5 +59,9 @@ fman@500000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe5000 0x1000>; + + pcsphy10: ethernet-phy@0 { + reg = <0x0>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi index bb627b3bf3db..b8b541ff5fb0 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi @@ -51,6 +51,7 @@ fman@500000 { reg = <0xe6000 0x1000>; fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>; ptp-timer = <&ptp_timer1>; + pcsphy-handle = <&pcsphy11>; }; mdio@e7000 { @@ -58,5 +59,9 @@ fman@500000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe7000 0x1000>; + + pcsphy11: ethernet-phy@0 { + reg = <0x0>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi index 821ed12225d4..4b2cfddd1b15 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi @@ -51,6 +51,7 @@ fman@500000 { reg = <0xe8000 0x1000>; fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>; ptp-timer = <&ptp_timer1>; + pcsphy-handle = <&pcsphy12>; }; mdio@e9000 { @@ -58,5 +59,9 @@ fman@500000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe9000 0x1000>; + + pcsphy12: ethernet-phy@0 { + reg = <0x0>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi index e245f1a1e42a..0a52ddf7cc17 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi @@ -51,6 +51,7 @@ fman@500000 { reg = <0xea000 0x1000>; fsl,fman-ports = <&fman1_rx_0x0d &fman1_tx_0x2d>; ptp-timer = <&ptp_timer1>; + pcsphy-handle = <&pcsphy13>; }; mdio@eb000 { @@ -58,5 +59,9 @@ fman@500000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xeb000 0x1000>; + + pcsphy13: ethernet-phy@0 { + reg = <0x0>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/sbc8641d.dts b/arch/powerpc/boot/dts/fsl/sbc8641d.dts new file mode 100644 index 000000000000..0a9733cd418d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/sbc8641d.dts @@ -0,0 +1,203 @@ +/* + * SBC8641D Device Tree Source + * + * Copyright 2008 Wind River Systems Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc8641si-pre.dtsi" + +/ { + model = "SBC8641D"; + compatible = "wind,sbc8641"; + + aliases { + pci1 = &pci1; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512M at 0x0 + }; + + lbc: localbus@f8005000 { + reg = <0xf8005000 0x1000>; + + ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash + 1 0 0xf0000000 0x00010000 // 64KB EEPROM + 2 0 0xf1000000 0x00100000 // EPLD (1MB) + 3 0 0xe0000000 0x04000000 // 64MB LB SDRAM (CS3) + 4 0 0xe4000000 0x04000000 // 64MB LB SDRAM (CS4) + 6 0 0xf4000000 0x00100000 // LCD display (1MB) + 7 0 0xe8000000 0x04000000>; // 64MB OneNAND + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x01000000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "dtb"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@300000 { + label = "kernel"; + reg = <0x00100000 0x00400000>; + read-only; + }; + partition@400000 { + label = "fs"; + reg = <0x00500000 0x00a00000>; + }; + partition@700000 { + label = "firmware"; + reg = <0x00f00000 0x00100000>; + read-only; + }; + }; + + epld@2,0 { + compatible = "wrs,epld-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <2 0 0x100000>; + ranges = <0 0 5 0 1 // User switches + 1 0 5 1 1 // Board ID/Rev + 3 0 5 3 1>; // LEDs + }; + }; + + soc: soc@f8000000 { + ranges = <0x00000000 0xf8000000 0x00100000>; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy0: ethernet-phy@1f { + reg = <0x1f>; + }; + phy1: ethernet-phy@0 { + reg = <0>; + }; + phy2: ethernet-phy@1 { + reg = <1>; + }; + phy3: ethernet-phy@2 { + reg = <2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@27000 { + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + }; + + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + pci0: pcie@f8008000 { + reg = <0xf8008000 0x1000>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + interrupt-map-mask = <0xff00 0 0 7>; + + pcie@0 { + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00100000>; + }; + + }; + + pci1: pcie@f8009000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf8009000 0x1000>; + bus-range = <0 0xff>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>; + clock-frequency = <100000000>; + interrupts = <25 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0000 0 0 1 &mpic 4 1 + 0x0000 0 0 2 &mpic 5 1 + 0x0000 0 0 3 &mpic 6 1 + 0x0000 0 0 4 &mpic 7 1 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xa0000000 + 0x02000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00100000>; + }; + }; +}; + +/include/ "mpc8641si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t1023rdb.dts b/arch/powerpc/boot/dts/fsl/t1023rdb.dts index 6bd842beb1dc..29757623e5ba 100644 --- a/arch/powerpc/boot/dts/fsl/t1023rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t1023rdb.dts @@ -79,7 +79,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl512s"; + compatible = "spansion,s25fl512s", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; /* input clk */ }; @@ -111,6 +111,47 @@ shunt-resistor = <1000>; }; }; + + fman@400000 { + fm1mac1: ethernet@e0000 { + phy-handle = <&sgmii_rtk_phy2>; + phy-connection-type = "sgmii"; + sleep = <&rcpm 0x80000000>; + }; + + fm1mac2: ethernet@e2000 { + sleep = <&rcpm 0x40000000>; + }; + + fm1mac3: ethernet@e4000 { + phy-handle = <&sgmii_aqr_phy3>; + phy-connection-type = "sgmii-2500"; + sleep = <&rcpm 0x20000000>; + }; + + fm1mac4: ethernet@e6000 { + phy-handle = <&rgmii_rtk_phy1>; + phy-connection-type = "rgmii"; + sleep = <&rcpm 0x10000000>; + }; + + + mdio0: mdio@fc000 { + rgmii_rtk_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + sgmii_rtk_phy2: ethernet-phy@3 { + reg = <0x3>; + }; + }; + + xmdio0: mdio@fd000 { + sgmii_aqr_phy3: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + }; + }; }; pci0: pcie@ffe240000 { diff --git a/arch/powerpc/boot/dts/fsl/t1024qds.dts b/arch/powerpc/boot/dts/fsl/t1024qds.dts index 6a3581b8e1f8..772143da367f 100644 --- a/arch/powerpc/boot/dts/fsl/t1024qds.dts +++ b/arch/powerpc/boot/dts/fsl/t1024qds.dts @@ -87,7 +87,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q128a11"; /* 16MB */ + compatible = "micron,n25q128a11", "jedec,spi-nor"; /* 16MB */ reg = <0>; spi-max-frequency = <10000000>; }; @@ -95,7 +95,7 @@ flash@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "sst,sst25wf040"; /* 512KB */ + compatible = "sst,sst25wf040", "jedec,spi-nor"; /* 512KB */ reg = <1>; spi-max-frequency = <10000000>; }; @@ -103,7 +103,7 @@ flash@2 { #address-cells = <1>; #size-cells = <1>; - compatible = "eon,en25s64"; /* 8MB */ + compatible = "eon,en25s64", "jedec,spi-nor"; /* 8MB */ reg = <2>; spi-max-frequency = <10000000>; }; diff --git a/arch/powerpc/boot/dts/fsl/t1024rdb.dts b/arch/powerpc/boot/dts/fsl/t1024rdb.dts index 0ccc7d03335e..302cdd22b4bb 100644 --- a/arch/powerpc/boot/dts/fsl/t1024rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t1024rdb.dts @@ -89,7 +89,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q512ax3"; + compatible = "micron,n25q512ax3", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; /* input clk */ }; @@ -140,6 +140,51 @@ #size-cells = <0>; }; }; + + fman@400000 { + fm1mac1: ethernet@e0000 { + phy-handle = <&xg_aqr105_phy3>; + phy-connection-type = "xgmii"; + sleep = <&rcpm 0x80000000>; + }; + + fm1mac2: ethernet@e2000 { + sleep = <&rcpm 0x40000000>; + }; + + fm1mac3: ethernet@e4000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + sleep = <&rcpm 0x20000000>; + }; + + fm1mac4: ethernet@e6000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + sleep = <&rcpm 0x10000000>; + }; + + + mdio0: mdio@fc000 { + rgmii_phy1: ethernet-phy@2 { + reg = <0x2>; + }; + rgmii_phy2: ethernet-phy@6 { + reg = <0x6>; + }; + }; + + xmdio0: mdio@fd000 { + xg_aqr105_phy3: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + sg_2500_aqr105_phy4: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + }; + }; }; pci0: pcie@ffe240000 { diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts index cf194154bbdc..621f2c6ee6ad 100644 --- a/arch/powerpc/boot/dts/fsl/t1040rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts @@ -1,7 +1,7 @@ /* * T1040RDB Device Tree Source * - * Copyright 2014 Freescale Semiconductor Inc. + * Copyright 2014 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -38,6 +38,36 @@ / { model = "fsl,T1040RDB"; compatible = "fsl,T1040RDB"; + + aliases { + phy_sgmii_2 = &phy_sgmii_2; + }; + + soc@ffe000000 { + fman@400000 { + ethernet@e0000 { + fixed-link = <0 1 1000 0 0>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy_sgmii_2>; + phy-connection-type = "sgmii"; + }; + + mdio@fc000 { + phy_sgmii_2: ethernet-phy@03 { + reg = <0x03>; + }; + }; + }; + }; + ifc: localbus@ffe124000 { cpld@3,0 { compatible = "fsl,t1040rdb-cpld"; diff --git a/arch/powerpc/boot/dts/fsl/t1042rdb.dts b/arch/powerpc/boot/dts/fsl/t1042rdb.dts index 8d908e795e4d..2c138627b1b4 100644 --- a/arch/powerpc/boot/dts/fsl/t1042rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t1042rdb.dts @@ -1,7 +1,7 @@ /* * T1042RDB Device Tree Source * - * Copyright 2014 Freescale Semiconductor Inc. + * Copyright 2014 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -38,6 +38,34 @@ / { model = "fsl,T1042RDB"; compatible = "fsl,T1042RDB"; + + aliases { + phy_sgmii_2 = &phy_sgmii_2; + }; + + soc@ffe000000 { + fman@400000 { + ethernet@e0000 { + status = "disabled"; + }; + + ethernet@e2000 { + status = "disabled"; + }; + + ethernet@e4000 { + phy-handle = <&phy_sgmii_2>; + phy-connection-type = "sgmii"; + }; + + mdio@fc000 { + phy_sgmii_2: ethernet-phy@03 { + reg = <0x03>; + }; + }; + }; + }; + ifc: localbus@ffe124000 { cpld@3,0 { compatible = "fsl,t1042rdb-cpld"; diff --git a/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts index 98c001019d6a..8ec3ff45e6fc 100644 --- a/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts +++ b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts @@ -1,7 +1,7 @@ /* * T1042RDB_PI Device Tree Source * - * Copyright 2014 Freescale Semiconductor Inc. + * Copyright 2014 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -38,11 +38,13 @@ / { model = "fsl,T1042RDB_PI"; compatible = "fsl,T1042RDB_PI"; + ifc: localbus@ffe124000 { cpld@3,0 { compatible = "fsl,t1042rdb_pi-cpld"; }; }; + soc: soc@ffe000000 { i2c@118000 { rtc@68 { @@ -51,6 +53,20 @@ interrupts = <0x2 0x1 0 0>; }; }; + + fman@400000 { + ethernet@e0000 { + status = "disabled"; + }; + + ethernet@e2000 { + status = "disabled"; + }; + + ethernet@e4000 { + status = "disabled"; + }; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi index 3f6d7c6a106b..8c7ea6c05de9 100644 --- a/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi @@ -104,7 +104,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q512ax3"; + compatible = "micron,n25q512ax3", "jedec,spi-nor"; reg = <0>; /* input clock */ spi-max-frequency = <10000000>; diff --git a/arch/powerpc/boot/dts/fsl/t104xqds.dtsi b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi index 1498d1e4aecf..977af355b388 100644 --- a/arch/powerpc/boot/dts/fsl/t104xqds.dtsi +++ b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi @@ -1,7 +1,7 @@ /* * T104xQDS Device Tree Source * - * Copyright 2013 - 2014 Freescale Semiconductor Inc. + * Copyright 2013 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -38,6 +38,33 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases { + emi1_rgmii0 = &t1040mdio0; + emi1_rgmii1 = &t1040mdio1; + emi1_slot3 = &t1040mdio3; + emi1_slot5 = &t1040mdio5; + emi1_slot6 = &t1040mdio6; + emi1_slot7 = &t1040mdio7; + rgmii_phy1 = &rgmii_phy1; + rgmii_phy2 = &rgmii_phy2; + phy_s3_01 = &phy_s3_01; + phy_s3_02 = &phy_s3_02; + phy_s3_03 = &phy_s3_03; + phy_s3_04 = &phy_s3_04; + phy_s5_01 = &phy_s5_01; + phy_s5_02 = &phy_s5_02; + phy_s5_03 = &phy_s5_03; + phy_s5_04 = &phy_s5_04; + phy_s6_01 = &phy_s6_01; + phy_s6_02 = &phy_s6_02; + phy_s6_03 = &phy_s6_03; + phy_s6_04 = &phy_s6_04; + phy_s7_01 = &phy_s7_01; + phy_s7_02 = &phy_s7_02; + phy_s7_03 = &phy_s7_03; + phy_s7_04 = &phy_s7_04; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -85,6 +112,128 @@ #size-cells = <1>; compatible = "fsl,fpga-qixis"; reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + + mdio-mux-emi1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + reg = <0x54 1>; + mux-mask = <0xe0>; + + t1040mdio0: mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x00>; + status = "disabled"; + + rgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + t1040mdio1: mdio@20 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x20>; + status = "disabled"; + + rgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + }; + + t1040mdio3: mdio@60 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x60>; + status = "disabled"; + + phy_s3_01: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_s3_02: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_s3_03: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_s3_04: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t1040mdio5: mdio@a0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xa0>; + + phy_s5_01: ethernet-phy@1c { + reg = <0x14>; + }; + + phy_s5_02: ethernet-phy@1d { + reg = <0x15>; + }; + + phy_s5_03: ethernet-phy@1e { + reg = <0x16>; + }; + + phy_s5_04: ethernet-phy@1f { + reg = <0x17>; + }; + }; + + t1040mdio6: mdio@c0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xc0>; + + phy_s6_01: ethernet-phy@1c { + reg = <0x18>; + }; + + phy_s6_02: ethernet-phy@1d { + reg = <0x19>; + }; + + phy_s6_03: ethernet-phy@1e { + reg = <0x1a>; + }; + + phy_s6_04: ethernet-phy@1f { + reg = <0x1b>; + }; + }; + + t1040mdio7: mdio@e0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0>; + status = "disabled"; + + phy_s7_01: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_s7_02: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_s7_03: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_s7_04: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; }; }; @@ -112,7 +261,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; /* input clock */ }; @@ -129,6 +278,33 @@ interrupts = <0x1 0x1 0 0>; }; }; + + fman@400000 { + ethernet@e0000 { + fixed-link = <0 1 1000 0 0>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy_s7_03>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + }; + }; }; pci0: pcie@ffe240000 { diff --git a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi index 830ea484295b..72691ef102ee 100644 --- a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi @@ -1,7 +1,7 @@ /* * T1040RDB/T1042RDB Device Tree Source * - * Copyright 2014 Freescale Semiconductor Inc. + * Copyright 2014 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -33,6 +33,12 @@ */ / { + aliases { + phy_rgmii_0 = &phy_rgmii_0; + phy_rgmii_1 = &phy_rgmii_1; + phy_sgmii_2 = &phy_sgmii_2; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -103,10 +109,15 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q512a"; + compatible = "micron,n25q512a", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; /* input clock */ }; + slic@3 { + compatible = "maxim,ds26522"; + reg = <3>; + spi-max-frequency = <2000000>; /* input clock */ + }; }; i2c@118000 { @@ -125,6 +136,31 @@ }; }; + fman@400000 { + ethernet@e6000 { + phy-handle = <&phy_rgmii_0>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii"; + }; + + mdio0: mdio@fc000 { + phy_sgmii_2: ethernet-phy@03 { + reg = <0x03>; + }; + + phy_rgmii_0: ethernet-phy@01 { + reg = <0x01>; + }; + + phy_rgmii_1: ethernet-phy@02 { + reg = <0x02>; + }; + }; + }; }; pci0: pcie@ffe240000 { diff --git a/arch/powerpc/boot/dts/fsl/t2080qds.dts b/arch/powerpc/boot/dts/fsl/t2080qds.dts index 9c8e10fe04cb..8d190e8c62ce 100644 --- a/arch/powerpc/boot/dts/fsl/t2080qds.dts +++ b/arch/powerpc/boot/dts/fsl/t2080qds.dts @@ -1,7 +1,7 @@ /* * T2080QDS Device Tree Source * - * Copyright 2013 Freescale Semiconductor Inc. + * Copyright 2013 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -42,6 +42,12 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases { + emi1_slot1 = &t2080mdio2; + emi1_slot2 = &t2080mdio3; + emi1_slot3 = &t2080mdio4; + }; + rio: rapidio@ffe0c0000 { reg = <0xf 0xfe0c0000 0 0x11000>; @@ -54,4 +60,154 @@ }; }; +&soc { + fman@400000 { + ethernet@e0000 { + phy-handle = <&phy_sgmii_s3_1e>; + phy-connection-type = "xgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy_sgmii_s3_1f>; + phy-connection-type = "xgmii"; + }; + + ethernet@e4000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_sgmii_s2_1e>; + phy-connection-type = "sgmii"; + }; + + ethernet@ea000 { + phy-handle = <&phy_sgmii_s2_1d>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy_xaui_slot3>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { + phy-handle = <&phy_sgmii_s3_1f>; + phy-connection-type = "xgmii"; + }; + + mdio@fd000 { + phy_xaui_slot3: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x3>; + }; + }; + }; +}; + +&boardctrl { + mdio-mux-emi1 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x54 1>; + mux-mask = <0xe0>; + + t2080mdio0: mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + rgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + t2080mdio1: mdio@20 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x20>; + + rgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + }; + + t2080mdio2: mdio@40 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40>; + status = "disabled"; + + phy_sgmii_s1_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_s1_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_s1_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_s1_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t2080mdio3: mdio@c0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xc0>; + + phy_sgmii_s2_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_s2_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_s2_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_s2_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t2080mdio4: mdio@60 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x60>; + status = "disabled"; + + phy_sgmii_s3_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_s3_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_s3_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_s3_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; +}; + /include/ "t2080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t2080rdb.dts b/arch/powerpc/boot/dts/fsl/t2080rdb.dts index 33205bf08919..836e4c965b22 100644 --- a/arch/powerpc/boot/dts/fsl/t2080rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t2080rdb.dts @@ -1,7 +1,7 @@ /* * T2080PCIe-RDB Board Device Tree Source * - * Copyright 2014 Freescale Semiconductor Inc. + * Copyright 2014 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -54,4 +54,69 @@ }; }; +&soc { + fman@400000 { + ethernet@e0000 { + phy-handle = <&xg_aq1202_phy3>; + phy-connection-type = "xgmii"; + }; + + ethernet@e2000 { + phy-handle = <&xg_aq1202_phy4>; + phy-connection-type = "xgmii"; + }; + + ethernet@e4000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + }; + + ethernet@f0000 { + phy-handle = <&xg_cs4315_phy1>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { + phy-handle = <&xg_cs4315_phy2>; + phy-connection-type = "xgmii"; + }; + + mdio@fc000 { + rgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + rgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + }; + + mdio@fd000 { + xg_cs4315_phy1: ethernet-phy@c { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0xc>; + }; + + xg_cs4315_phy2: ethernet-phy@d { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0xd>; + }; + + xg_aq1202_phy3: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + + xg_aq1202_phy4: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + }; + }; +}; + /include/ "t2080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t2081qds.dts b/arch/powerpc/boot/dts/fsl/t2081qds.dts index b81213596dbf..fc5c4a30f7ad 100644 --- a/arch/powerpc/boot/dts/fsl/t2081qds.dts +++ b/arch/powerpc/boot/dts/fsl/t2081qds.dts @@ -1,7 +1,7 @@ /* * T2081QDS Device Tree Source * - * Copyright 2013 Freescale Semiconductor Inc. + * Copyright 2013 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -41,6 +41,225 @@ #address-cells = <2>; #size-cells = <2>; interrupt-parent = <&mpic>; + + aliases { + emi1_slot1 = &t2081mdio2; + emi1_slot2 = &t2081mdio3; + emi1_slot3 = &t2081mdio4; + emi1_slot5 = &t2081mdio5; + emi1_slot6 = &t2081mdio6; + emi1_slot7 = &t2081mdio7; + }; +}; + +&soc { + fman@400000 { + ethernet@e0000 { + phy-handle = <&phy_sgmii_s7_1c>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy_sgmii_s7_1d>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_sgmii_s3_1c>; + phy-connection-type = "sgmii"; + }; + + ethernet@ea000 { + phy-handle = <&phy_sgmii_s7_1f>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy_sgmii_s2_1c>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { + phy-handle = <&phy_sgmii_s7_1e>; + phy-connection-type = "xgmii"; + }; + }; +}; + +&boardctrl { + mdio-mux-emi1 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x54 1>; + mux-mask = <0xe0>; + + t2081mdio0: mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + rgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + t2081mdio1: mdio@20 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x20>; + + rgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + }; + + t2081mdio2: mdio@40 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40>; + + phy_sgmii_s1_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_s1_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_s1_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_s1_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t2081mdio3: mdio@60 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x60>; + + phy_sgmii_s2_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_s2_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_s2_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_s2_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t2081mdio4: mdio@80 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x80>; + status = "disabled"; + + phy_sgmii_s3_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_s3_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_s3_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_s3_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t2081mdio5: mdio@a0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xa0>; + status = "disabled"; + + phy_sgmii_s5_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_s5_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_s5_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_s5_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t2081mdio6: mdio@c0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xc0>; + status = "disabled"; + + phy_sgmii_s6_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_s6_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_s6_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_s6_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t2081mdio7: mdio@e0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0>; + + phy_sgmii_s7_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + + phy_sgmii_s7_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + + phy_sgmii_s7_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + + phy_sgmii_s7_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; }; /include/ "t2081si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t208xqds.dtsi b/arch/powerpc/boot/dts/fsl/t208xqds.dtsi index 869f9159b4d1..ec080bd01b09 100644 --- a/arch/powerpc/boot/dts/fsl/t208xqds.dtsi +++ b/arch/powerpc/boot/dts/fsl/t208xqds.dtsi @@ -112,7 +112,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q128a11"; /* 16MB */ + compatible = "micron,n25q128a11", "jedec,spi-nor"; /* 16MB */ reg = <0>; spi-max-frequency = <40000000>; /* input clock */ }; @@ -120,7 +120,7 @@ flash@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "sst,sst25wf040"; + compatible = "sst,sst25wf040", "jedec,spi-nor"; reg = <1>; spi-max-frequency = <35000000>; }; @@ -128,7 +128,7 @@ flash@2 { #address-cells = <1>; #size-cells = <1>; - compatible = "eon,en25s64"; + compatible = "eon,en25s64", "jedec,spi-nor"; reg = <2>; spi-max-frequency = <35000000>; }; diff --git a/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi index 693d2a8fa01c..dc9326875778 100644 --- a/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi @@ -113,7 +113,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q512a"; + compatible = "micron,n25q512a", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; /* input clock */ }; diff --git a/arch/powerpc/boot/dts/fsl/t4240qds.dts b/arch/powerpc/boot/dts/fsl/t4240qds.dts index c067a6533809..9573ceada07c 100644 --- a/arch/powerpc/boot/dts/fsl/t4240qds.dts +++ b/arch/powerpc/boot/dts/fsl/t4240qds.dts @@ -1,7 +1,7 @@ /* * T4240QDS Device Tree Source * - * Copyright 2012 - 2014 Freescale Semiconductor Inc. + * Copyright 2012 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -41,6 +41,44 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases{ + phy_rgmii1 = &phyrgmii1; + phy_rgmii2 = &phyrgmii2; + phy_sgmii3 = &phy3; + phy_sgmii4 = &phy4; + phy_sgmii11 = &phy11; + phy_sgmii12 = &phy12; + sgmii_phy11 = &sgmiiphy11; + sgmii_phy12 = &sgmiiphy12; + sgmii_phy13 = &sgmiiphy13; + sgmii_phy14 = &sgmiiphy14; + sgmii_phy21 = &sgmiiphy21; + sgmii_phy22 = &sgmiiphy22; + sgmii_phy23 = &sgmiiphy23; + sgmii_phy24 = &sgmiiphy24; + sgmii_phy31 = &sgmiiphy31; + sgmii_phy32 = &sgmiiphy32; + sgmii_phy33 = &sgmiiphy33; + sgmii_phy34 = &sgmiiphy34; + sgmii_phy41 = &sgmiiphy41; + sgmii_phy42 = &sgmiiphy42; + sgmii_phy43 = &sgmiiphy43; + sgmii_phy44 = &sgmiiphy44; + phy_xfi1 = &xfiphy1; + phy_xfi2 = &xfiphy2; + phy_xfi3 = &xfiphy3; + phy_xfi4 = &xfiphy4; + xfi_pcs_mdio1 = &xfimdio0; + xfi_pcs_mdio2 = &xfimdio1; + xfi_pcs_mdio3 = &xfimdio2; + xfi_pcs_mdio4 = &xfimdio3; + emi1_rgmii = &t4240mdio0; + emi1_slot1 = &t4240mdio1; + emi1_slot2 = &t4240mdio2; + emi1_slot3 = &t4240mdio3; + emi1_slot4 = &t4240mdio4; + }; + ifc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x2000>; ranges = <0 0 0xf 0xe8000000 0x08000000 @@ -91,8 +129,190 @@ }; board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,t4240qds-fpga", "fsl,fpga-qixis"; reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + + mdio-mux-emi1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio1>; + reg = <0x54 1>; + mux-mask = <0xe0>; + + t4240mdio0: mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + phyrgmii1: ethernet-phy@1 { + reg = <0x1>; + }; + + phyrgmii2: ethernet-phy@2 { + reg = <0x2>; + }; + }; + + t4240mdio1: mdio@20 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x20>; + status = "disabled"; + + phy1: ethernet-phy@0 { + reg = <0x0>; + }; + + phy2: ethernet-phy@1 { + reg = <0x1>; + }; + + phy3: ethernet-phy@2 { + reg = <0x2>; + }; + + phy4: ethernet-phy@3 { + reg = <0x3>; + }; + + sgmiiphy11: ethernet-phy@1c { + reg = <0x1c>; + }; + + sgmiiphy12: ethernet-phy@1d { + reg = <0x1d>; + }; + + sgmiiphy13: ethernet-phy@1e { + reg = <0x1e>; + }; + + sgmiiphy14: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t4240mdio2: mdio@40 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40>; + status = "disabled"; + + phy5: ethernet-phy@4 { + reg = <0x4>; + }; + + phy6: ethernet-phy@5 { + reg = <0x5>; + }; + + phy7: ethernet-phy@6 { + reg = <0x6>; + }; + + phy8: ethernet-phy@7 { + reg = <0x7>; + }; + + sgmiiphy21: ethernet-phy@1c { + reg = <0x1c>; + }; + + sgmiiphy22: ethernet-phy@1d { + reg = <0x1d>; + }; + + sgmiiphy23: ethernet-phy@1e { + reg = <0x1e>; + }; + + sgmiiphy24: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t4240mdio3: mdio@60 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x60>; + status = "disabled"; + + phy9: ethernet-phy@8 { + reg = <0x8>; + }; + + phy10: ethernet-phy@9 { + reg = <0x9>; + }; + + phy11: ethernet-phy@a { + reg = <0xa>; + }; + + phy12: ethernet-phy@b { + reg = <0xb>; + }; + + sgmiiphy31: ethernet-phy@1c { + reg = <0x1c>; + }; + + sgmiiphy32: ethernet-phy@1d { + reg = <0x1d>; + }; + + sgmiiphy33: ethernet-phy@1e { + reg = <0x1e>; + }; + + sgmiiphy34: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t4240mdio4: mdio@80 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x80>; + status = "disabled"; + + phy13: ethernet-phy@c { + reg = <0xc>; + }; + + phy14: ethernet-phy@d { + reg = <0xd>; + }; + + phy15: ethernet-phy@e { + reg = <0xe>; + }; + + phy16: ethernet-phy@f { + reg = <0xf>; + }; + + sgmiiphy41: ethernet-phy@1c { + reg = <0x1c>; + }; + + sgmiiphy42: ethernet-phy@1d { + reg = <0x1d>; + }; + + sgmiiphy43: ethernet-phy@1e { + reg = <0x1e>; + }; + + sgmiiphy44: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; }; }; @@ -138,7 +358,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "sst,sst25wf040"; + compatible = "sst,sst25wf040", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; /* input clock */ }; @@ -234,6 +454,184 @@ sdhc@114000 { voltage-ranges = <1800 1800 3300 3300>; }; + + fman@400000 { + port@83000 { + status = "disabled"; + }; + + port@84000 { + status = "disabled"; + }; + + port@85000 { + status = "disabled"; + }; + + port@86000 { + status = "disabled"; + }; + + port@87000 { + status = "disabled"; + }; + + ethernet@e0000 { + phy-handle = <&phy5>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy6>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy7>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy8>; + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phyrgmii2>; + phy-connection-type = "rgmii"; + }; + + ethernet@ea000 { + phy-handle = <&phy2>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { + phy-handle = <&xauiphy1>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { + phy-handle = <&xauiphy2>; + phy-connection-type = "xgmii"; + }; + + xfimdio0: mdio@f1000 { + status = "disabled"; + + xfiphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + }; + + xfimdio1: mdio@f3000 { + status = "disabled"; + + xfiphy2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + }; + }; + + fman@500000 { + port@84000 { + status = "disabled"; + }; + + port@85000 { + status = "disabled"; + }; + + port@86000 { + status = "disabled"; + }; + + port@87000 { + status = "disabled"; + }; + + ethernet@e0000 { + phy-handle = <&phy13>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy14>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy15>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy16>; + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phyrgmii1>; + phy-connection-type = "rgmii"; + }; + + ethernet@ea000 { + phy-handle = <&phy10>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { + phy-handle = <&xauiphy3>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { + phy-handle = <&xauiphy4>; + phy-connection-type = "xgmii"; + }; + + xfimdio2: mdio@f1000 { + status = "disabled"; + + xfiphy3: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + }; + + xfimdio3: mdio@f3000 { + status = "disabled"; + + xfiphy4: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + }; + + mdio@fd000 { + xauiphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + + xauiphy2: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + + xauiphy3: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + + xauiphy4: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x3>; + }; + }; + }; }; pci0: pcie@ffe240000 { diff --git a/arch/powerpc/boot/dts/fsl/t4240rdb.dts b/arch/powerpc/boot/dts/fsl/t4240rdb.dts index 6e820a875621..cc0a264b8acb 100644 --- a/arch/powerpc/boot/dts/fsl/t4240rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t4240rdb.dts @@ -1,7 +1,7 @@ /* * T4240RDB Device Tree Source * - * Copyright 2014 Freescale Semiconductor Inc. + * Copyright 2014 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -41,6 +41,17 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases { + sgmii_phy21 = &sgmiiphy21; + sgmii_phy22 = &sgmiiphy22; + sgmii_phy23 = &sgmiiphy23; + sgmii_phy24 = &sgmiiphy24; + sgmii_phy41 = &sgmiiphy41; + sgmii_phy42 = &sgmiiphy42; + sgmii_phy43 = &sgmiiphy43; + sgmii_phy44 = &sgmiiphy44; + }; + ifc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x2000>; ranges = <0 0 0xf 0xe8000000 0x08000000 @@ -107,7 +118,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "sst,sst25wf040"; + compatible = "sst,sst25wf040", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; /* input clock */ }; @@ -136,6 +147,142 @@ sdhc@114000 { voltage-ranges = <1800 1800 3300 3300>; }; + + fman@400000 { + ethernet@e0000 { + phy-handle = <&sgmiiphy21>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&sgmiiphy22>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&sgmiiphy23>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&sgmiiphy24>; + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + status = "disabled"; + }; + + ethernet@ea000 { + status = "disabled"; + }; + + ethernet@f0000 { + phy-handle = <&xfiphy1>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { + phy-handle = <&xfiphy2>; + phy-connection-type = "xgmii"; + }; + }; + + fman@500000 { + ethernet@e0000 { + phy-handle = <&sgmiiphy41>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&sgmiiphy42>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&sgmiiphy43>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&sgmiiphy44>; + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + status = "disabled"; + }; + + ethernet@ea000 { + status = "disabled"; + }; + + ethernet@f0000 { + phy-handle = <&xfiphy3>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { + phy-handle = <&xfiphy4>; + phy-connection-type = "xgmii"; + }; + + mdio@fc000 { + sgmiiphy21: ethernet-phy@0 { + reg = <0x0>; + }; + + sgmiiphy22: ethernet-phy@1 { + reg = <0x1>; + }; + + sgmiiphy23: ethernet-phy@2 { + reg = <0x2>; + }; + + sgmiiphy24: ethernet-phy@3 { + reg = <0x3>; + }; + + sgmiiphy41: ethernet-phy@4 { + reg = <0x4>; + }; + + sgmiiphy42: ethernet-phy@5 { + reg = <0x5>; + }; + + sgmiiphy43: ethernet-phy@6 { + reg = <0x6>; + }; + + sgmiiphy44: ethernet-phy@7 { + reg = <0x7>; + }; + }; + + mdio@fd000 { + xfiphy1: ethernet-phy@10 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x10>; + }; + + xfiphy2: ethernet-phy@11 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x11>; + }; + + xfiphy3: ethernet-phy@13 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x13>; + }; + + xfiphy4: ethernet-phy@12 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x12>; + }; + }; + }; }; pci0: pcie@ffe240000 { diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts deleted file mode 100644 index 83eb0fda2666..000000000000 --- a/arch/powerpc/boot/dts/gef_ppc9a.dts +++ /dev/null @@ -1,425 +0,0 @@ -/* - * GE PPC9A Device Tree Source - * - * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Based on: SBS CM6 Device Tree Source - * Copyright 2007 SBS Technologies GmbH & Co. KG - * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source) - * Copyright 2006 Freescale Semiconductor Inc. - */ - -/* - * Compiled with dtc -I dts -O dtb -o gef_ppc9a.dtb gef_ppc9a.dts - */ - -/dts-v1/; - -/ { - model = "GEF_PPC9A"; - compatible = "gef,ppc9a"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8641@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <32768>; // L1, 32K - i-cache-size = <32768>; // L1, 32K - timebase-frequency = <0>; // From uboot - bus-frequency = <0>; // From uboot - clock-frequency = <0>; // From uboot - }; - PowerPC,8641@1 { - device_type = "cpu"; - reg = <1>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <32768>; // L1, 32K - i-cache-size = <32768>; // L1, 32K - timebase-frequency = <0>; // From uboot - bus-frequency = <0>; // From uboot - clock-frequency = <0>; // From uboot - }; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x40000000>; // set by uboot - }; - - localbus@fef05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8641-localbus", "simple-bus"; - reg = <0xfef05000 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; - - ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash - 1 0 0xe8000000 0x08000000 // Paged Flash 0 - 2 0 0xe0000000 0x08000000 // Paged Flash 1 - 3 0 0xfc100000 0x00020000 // NVRAM - 4 0 0xfc000000 0x00008000 // FPGA - 5 0 0xfc008000 0x00008000 // AFIX FPGA - 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit) - 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit) - - /* flash@0,0 is a mirror of part of the memory in flash@1,0 - flash@0,0 { - compatible = "gef,ppc9a-firmware-mirror", "cfi-flash"; - reg = <0x0 0x0 0x1000000>; - bank-width = <4>; - device-width = <2>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "firmware"; - reg = <0x0 0x1000000>; - read-only; - }; - }; - */ - - flash@1,0 { - compatible = "gef,ppc9a-paged-flash", "cfi-flash"; - reg = <0x1 0x0 0x8000000>; - bank-width = <4>; - device-width = <2>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "user"; - reg = <0x0 0x7800000>; - }; - partition@7800000 { - label = "firmware"; - reg = <0x7800000 0x800000>; - read-only; - }; - }; - - nvram@3,0 { - device_type = "nvram"; - compatible = "simtek,stk14ca8"; - reg = <0x3 0x0 0x20000>; - }; - - fpga@4,0 { - compatible = "gef,ppc9a-fpga-regs"; - reg = <0x4 0x0 0x40>; - }; - - wdt@4,2000 { - compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00", - "gef,fpga-wdt"; - reg = <0x4 0x2000 0x8>; - interrupts = <0x1a 0x4>; - interrupt-parent = <&gef_pic>; - }; - /* Second watchdog available, driver currently supports one. - wdt@4,2010 { - compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00", - "gef,fpga-wdt"; - reg = <0x4 0x2010 0x8>; - interrupts = <0x1b 0x4>; - interrupt-parent = <&gef_pic>; - }; - */ - gef_pic: pic@4,4000 { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "gef,ppc9a-fpga-pic", "gef,fpga-pic-1.00"; - reg = <0x4 0x4000 0x20>; - interrupts = <0x8 - 0x9>; - interrupt-parent = <&mpic>; - - }; - gef_gpio: gpio@7,14000 { - #gpio-cells = <2>; - compatible = "gef,ppc9a-gpio", "gef,sbc610-gpio"; - reg = <0x7 0x14000 0x24>; - gpio-controller; - }; - }; - - soc@fef00000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "soc"; - compatible = "fsl,mpc8641-soc", "simple-bus"; - ranges = <0x0 0xfef00000 0x00100000>; - bus-frequency = <33333333>; - - mcm-law@0 { - compatible = "fsl,mcm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - mcm@1000 { - compatible = "fsl,mpc8641-mcm", "fsl,mcm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - i2c1: i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <0x2b 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - - hwmon@48 { - compatible = "national,lm92"; - reg = <0x48>; - }; - - hwmon@4c { - compatible = "adi,adt7461"; - reg = <0x4c>; - }; - - rtc@51 { - compatible = "epson,rx8581"; - reg = <0x00000051>; - }; - - eti@6b { - compatible = "dallas,ds1682"; - reg = <0x6b>; - }; - }; - - i2c2: i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <0x2b 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "gmii"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&gef_pic>; - interrupts = <0x9 0x4>; - reg = <1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&gef_pic>; - interrupts = <0x8 0x4>; - reg = <3>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi2>; - phy-handle = <&phy2>; - phy-connection-type = "gmii"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <0x2a 0x2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <0x1c 0x2>; - interrupt-parent = <&mpic>; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,mpc8641-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { - compatible = "fsl,mpc8641-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - }; - - pci0: pcie@fef08000 { - compatible = "fsl,mpc8641-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xfef08000 0x1000>; - bus-range = <0x0 0xff>; - ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 - 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <0x18 0x2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; - - pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x02000000 0x0 0x80000000 - 0x02000000 0x0 0x80000000 - 0x0 0x40000000 - - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00400000>; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts deleted file mode 100644 index d426dd3de9ef..000000000000 --- a/arch/powerpc/boot/dts/gef_sbc310.dts +++ /dev/null @@ -1,459 +0,0 @@ -/* - * GE SBC310 Device Tree Source - * - * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Based on: SBS CM6 Device Tree Source - * Copyright 2007 SBS Technologies GmbH & Co. KG - * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source) - * Copyright 2006 Freescale Semiconductor Inc. - */ - -/* - * Compiled with dtc -I dts -O dtb -o gef_sbc310.dtb gef_sbc310.dts - */ - -/dts-v1/; - -/ { - model = "GEF_SBC310"; - compatible = "gef,sbc310"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8641@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <32768>; // L1, 32K - i-cache-size = <32768>; // L1, 32K - timebase-frequency = <0>; // From uboot - bus-frequency = <0>; // From uboot - clock-frequency = <0>; // From uboot - }; - PowerPC,8641@1 { - device_type = "cpu"; - reg = <1>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <32768>; // L1, 32K - i-cache-size = <32768>; // L1, 32K - timebase-frequency = <0>; // From uboot - bus-frequency = <0>; // From uboot - clock-frequency = <0>; // From uboot - }; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x40000000>; // set by uboot - }; - - localbus@fef05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8641-localbus", "simple-bus"; - reg = <0xfef05000 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; - - ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash - 1 0 0xe0000000 0x08000000 // Paged Flash 0 - 2 0 0xe8000000 0x08000000 // Paged Flash 1 - 3 0 0xfc100000 0x00020000 // NVRAM - 4 0 0xfc000000 0x00010000>; // FPGA - - /* flash@0,0 is a mirror of part of the memory in flash@1,0 - flash@0,0 { - compatible = "gef,sbc310-firmware-mirror", "cfi-flash"; - reg = <0x0 0x0 0x01000000>; - bank-width = <2>; - device-width = <2>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "firmware"; - reg = <0x0 0x01000000>; - read-only; - }; - }; - */ - - flash@1,0 { - compatible = "gef,sbc310-paged-flash", "cfi-flash"; - reg = <0x1 0x0 0x8000000>; - bank-width = <2>; - device-width = <2>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "user"; - reg = <0x0 0x7800000>; - }; - partition@7800000 { - label = "firmware"; - reg = <0x7800000 0x800000>; - read-only; - }; - }; - - nvram@3,0 { - device_type = "nvram"; - compatible = "simtek,stk14ca8"; - reg = <0x3 0x0 0x20000>; - }; - - fpga@4,0 { - compatible = "gef,fpga-regs"; - reg = <0x4 0x0 0x40>; - }; - - wdt@4,2000 { - compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00", - "gef,fpga-wdt"; - reg = <0x4 0x2000 0x8>; - interrupts = <0x1a 0x4>; - interrupt-parent = <&gef_pic>; - }; -/* - wdt@4,2010 { - compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00", - "gef,fpga-wdt"; - reg = <0x4 0x2010 0x8>; - interrupts = <0x1b 0x4>; - interrupt-parent = <&gef_pic>; - }; -*/ - gef_pic: pic@4,4000 { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic"; - reg = <0x4 0x4000 0x20>; - interrupts = <0x8 - 0x9>; - interrupt-parent = <&mpic>; - - }; - gef_gpio: gpio@4,8000 { - #gpio-cells = <2>; - compatible = "gef,sbc310-gpio"; - reg = <0x4 0x8000 0x24>; - gpio-controller; - }; - }; - - soc@fef00000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "soc"; - compatible = "fsl,mpc8641-soc", "simple-bus"; - ranges = <0x0 0xfef00000 0x00100000>; - bus-frequency = <33333333>; - - mcm-law@0 { - compatible = "fsl,mcm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - mcm@1000 { - compatible = "fsl,mpc8641-mcm", "fsl,mcm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - i2c1: i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <0x2b 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - - rtc@51 { - compatible = "epson,rx8581"; - reg = <0x00000051>; - }; - }; - - i2c2: i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <0x2b 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - - hwmon@48 { - compatible = "national,lm92"; - reg = <0x48>; - }; - - hwmon@4c { - compatible = "adi,adt7461"; - reg = <0x4c>; - }; - - eti@6b { - compatible = "dallas,ds1682"; - reg = <0x6b>; - }; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "gmii"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&gef_pic>; - interrupts = <0x9 0x4>; - reg = <1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&gef_pic>; - interrupts = <0x8 0x4>; - reg = <3>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi2>; - phy-handle = <&phy2>; - phy-connection-type = "gmii"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <0x2a 0x2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <0x1c 0x2>; - interrupt-parent = <&mpic>; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,mpc8641-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { - compatible = "fsl,mpc8641-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - }; - - pci0: pcie@fef08000 { - compatible = "fsl,mpc8641-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xfef08000 0x1000>; - bus-range = <0x0 0xff>; - ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 - 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <0x18 0x2>; - interrupt-map-mask = <0xff00 0x0 0x0 0x7>; - interrupt-map = < - 0x0000 0x0 0x0 0x1 &mpic 0x0 0x2 - 0x0000 0x0 0x0 0x2 &mpic 0x1 0x2 - 0x0000 0x0 0x0 0x3 &mpic 0x2 0x2 - 0x0000 0x0 0x0 0x4 &mpic 0x3 0x2 - >; - - pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x02000000 0x0 0x80000000 - 0x02000000 0x0 0x80000000 - 0x0 0x40000000 - - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00400000>; - }; - }; - - pci1: pcie@fef09000 { - compatible = "fsl,mpc8641-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xfef09000 0x1000>; - bus-range = <0x0 0xff>; - ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000 - 0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <0x19 0x2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - 0x0000 0x0 0x0 0x1 &mpic 0x4 0x2 - 0x0000 0x0 0x0 0x2 &mpic 0x5 0x2 - 0x0000 0x0 0x0 0x3 &mpic 0x6 0x2 - 0x0000 0x0 0x0 0x4 &mpic 0x7 0x2 - >; - - pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x02000000 0x0 0xc0000000 - 0x02000000 0x0 0xc0000000 - 0x0 0x20000000 - - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00400000>; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts deleted file mode 100644 index 5db3399b76b7..000000000000 --- a/arch/powerpc/boot/dts/gef_sbc610.dts +++ /dev/null @@ -1,423 +0,0 @@ -/* - * GE SBC610 Device Tree Source - * - * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Based on: SBS CM6 Device Tree Source - * Copyright 2007 SBS Technologies GmbH & Co. KG - * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source) - * Copyright 2006 Freescale Semiconductor Inc. - */ - -/* - * Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts - */ - -/dts-v1/; - -/ { - model = "GEF_SBC610"; - compatible = "gef,sbc610"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8641@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <32768>; // L1, 32K - i-cache-size = <32768>; // L1, 32K - timebase-frequency = <0>; // From uboot - bus-frequency = <0>; // From uboot - clock-frequency = <0>; // From uboot - }; - PowerPC,8641@1 { - device_type = "cpu"; - reg = <1>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <32768>; // L1, 32K - i-cache-size = <32768>; // L1, 32K - timebase-frequency = <0>; // From uboot - bus-frequency = <0>; // From uboot - clock-frequency = <0>; // From uboot - }; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x40000000>; // set by uboot - }; - - localbus@fef05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8641-localbus", "simple-bus"; - reg = <0xfef05000 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; - - ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash - 1 0 0xe8000000 0x08000000 // Paged Flash 0 - 2 0 0xe0000000 0x08000000 // Paged Flash 1 - 3 0 0xfc100000 0x00020000 // NVRAM - 4 0 0xfc000000 0x00008000 // FPGA - 5 0 0xfc008000 0x00008000 // AFIX FPGA - 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit) - 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit) - - /* flash@0,0 is a mirror of part of the memory in flash@1,0 - flash@0,0 { - compatible = "gef,sbc610-firmware-mirror", "cfi-flash"; - reg = <0x0 0x0 0x1000000>; - bank-width = <4>; - device-width = <2>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "firmware"; - reg = <0x0 0x1000000>; - read-only; - }; - }; - */ - - flash@1,0 { - compatible = "gef,sbc610-paged-flash", "cfi-flash"; - reg = <0x1 0x0 0x8000000>; - bank-width = <4>; - device-width = <2>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "user"; - reg = <0x0 0x7800000>; - }; - partition@7800000 { - label = "firmware"; - reg = <0x7800000 0x800000>; - read-only; - }; - }; - - nvram@3,0 { - device_type = "nvram"; - compatible = "simtek,stk14ca8"; - reg = <0x3 0x0 0x20000>; - }; - - fpga@4,0 { - compatible = "gef,fpga-regs"; - reg = <0x4 0x0 0x40>; - }; - - wdt@4,2000 { - compatible = "gef,fpga-wdt"; - reg = <0x4 0x2000 0x8>; - interrupts = <0x1a 0x4>; - interrupt-parent = <&gef_pic>; - }; - /* Second watchdog available, driver currently supports one. - wdt@4,2010 { - compatible = "gef,fpga-wdt"; - reg = <0x4 0x2010 0x8>; - interrupts = <0x1b 0x4>; - interrupt-parent = <&gef_pic>; - }; - */ - gef_pic: pic@4,4000 { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "gef,fpga-pic"; - reg = <0x4 0x4000 0x20>; - interrupts = <0x8 - 0x9>; - interrupt-parent = <&mpic>; - - }; - gef_gpio: gpio@7,14000 { - #gpio-cells = <2>; - compatible = "gef,sbc610-gpio"; - reg = <0x7 0x14000 0x24>; - gpio-controller; - }; - }; - - soc@fef00000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xfef00000 0x00100000>; - bus-frequency = <33333333>; - - mcm-law@0 { - compatible = "fsl,mcm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - mcm@1000 { - compatible = "fsl,mpc8641-mcm", "fsl,mcm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - i2c1: i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <0x2b 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - - hwmon@48 { - compatible = "national,lm92"; - reg = <0x48>; - }; - - hwmon@4c { - compatible = "adi,adt7461"; - reg = <0x4c>; - }; - - rtc@51 { - compatible = "epson,rx8581"; - reg = <0x00000051>; - }; - - eti@6b { - compatible = "dallas,ds1682"; - reg = <0x6b>; - }; - }; - - i2c2: i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <0x2b 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "gmii"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&gef_pic>; - interrupts = <0x9 0x4>; - reg = <1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&gef_pic>; - interrupts = <0x8 0x4>; - reg = <3>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi2>; - phy-handle = <&phy2>; - phy-connection-type = "gmii"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <0x2a 0x2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <0x1c 0x2>; - interrupt-parent = <&mpic>; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,mpc8641-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { - compatible = "fsl,mpc8641-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - }; - - pci0: pcie@fef08000 { - compatible = "fsl,mpc8641-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xfef08000 0x1000>; - bus-range = <0x0 0xff>; - ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 - 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <0x18 0x2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; - - pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x02000000 0x0 0x80000000 - 0x02000000 0x0 0x80000000 - 0x0 0x40000000 - - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00400000>; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts deleted file mode 100644 index 68f0ed7626bd..000000000000 --- a/arch/powerpc/boot/dts/sbc8641d.dts +++ /dev/null @@ -1,447 +0,0 @@ -/* - * SBC8641D Device Tree Source - * - * Copyright 2008 Wind River Systems Inc. - * - * Paul Gortmaker (see MAINTAINERS for contact information) - * - * Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/dts-v1/; - -/ { - model = "SBC8641D"; - compatible = "wind,sbc8641"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - ethernet3 = &enet3; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8641@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <32768>; // L1 - i-cache-size = <32768>; // L1 - timebase-frequency = <0>; // From uboot - bus-frequency = <0>; // From uboot - clock-frequency = <0>; // From uboot - }; - PowerPC,8641@1 { - device_type = "cpu"; - reg = <1>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <32768>; - i-cache-size = <32768>; - timebase-frequency = <0>; // From uboot - bus-frequency = <0>; // From uboot - clock-frequency = <0>; // From uboot - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; // 512M at 0x0 - }; - - localbus@f8005000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8641-localbus", "simple-bus"; - reg = <0xf8005000 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; - - ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash - 1 0 0xf0000000 0x00010000 // 64KB EEPROM - 2 0 0xf1000000 0x00100000 // EPLD (1MB) - 3 0 0xe0000000 0x04000000 // 64MB LB SDRAM (CS3) - 4 0 0xe4000000 0x04000000 // 64MB LB SDRAM (CS4) - 6 0 0xf4000000 0x00100000 // LCD display (1MB) - 7 0 0xe8000000 0x04000000>; // 64MB OneNAND - - flash@0,0 { - compatible = "cfi-flash"; - reg = <0 0 0x01000000>; - bank-width = <2>; - device-width = <2>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "dtb"; - reg = <0x00000000 0x00100000>; - read-only; - }; - partition@300000 { - label = "kernel"; - reg = <0x00100000 0x00400000>; - read-only; - }; - partition@400000 { - label = "fs"; - reg = <0x00500000 0x00a00000>; - }; - partition@700000 { - label = "firmware"; - reg = <0x00f00000 0x00100000>; - read-only; - }; - }; - - epld@2,0 { - compatible = "wrs,epld-localbus"; - #address-cells = <2>; - #size-cells = <1>; - reg = <2 0 0x100000>; - ranges = <0 0 5 0 1 // User switches - 1 0 5 1 1 // Board ID/Rev - 3 0 5 3 1>; // LEDs - }; - }; - - soc@f8000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x00000000 0xf8000000 0x00100000>; - bus-frequency = <0>; - - mcm-law@0 { - compatible = "fsl,mcm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - mcm@1000 { - compatible = "fsl,mpc8641-mcm", "fsl,mcm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@1f { - reg = <0x1f>; - }; - phy1: ethernet-phy@0 { - reg = <0>; - }; - phy2: ethernet-phy@1 { - reg = <1>; - }; - phy3: ethernet-phy@2 { - reg = <2>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet2: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi2>; - phy-handle = <&phy2>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet3: ethernet@27000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <3>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x27000 0x1000>; - ranges = <0x0 0x27000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <37 2 38 2 39 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi3>; - phy-handle = <&phy3>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <28 2>; - interrupt-parent = <&mpic>; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - big-endian; - }; - - global-utilities@e0000 { - compatible = "fsl,mpc8641-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - }; - - pci0: pcie@f8008000 { - compatible = "fsl,mpc8641-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xf8008000 0x1000>; - bus-range = <0x0 0xff>; - ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; - interrupt-map-mask = <0xff00 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0x0000 0 0 1 &mpic 0 1 - 0x0000 0 0 2 &mpic 1 1 - 0x0000 0 0 3 &mpic 2 1 - 0x0000 0 0 4 &mpic 3 1 - >; - - pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x02000000 0x0 0x80000000 - 0x02000000 0x0 0x80000000 - 0x0 0x20000000 - - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00100000>; - }; - - }; - - pci1: pcie@f8009000 { - compatible = "fsl,mpc8641-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xf8009000 0x1000>; - bus-range = <0 0xff>; - ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0x0000 0 0 1 &mpic 4 1 - 0x0000 0 0 2 &mpic 5 1 - 0x0000 0 0 3 &mpic 6 1 - 0x0000 0 0 4 &mpic 7 1 - >; - - pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x02000000 0x0 0xa0000000 - 0x02000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00100000>; - }; - }; -}; diff --git a/arch/powerpc/boot/rs6000.h b/arch/powerpc/boot/rs6000.h index 433f45084e41..d70517ccc0f7 100644 --- a/arch/powerpc/boot/rs6000.h +++ b/arch/powerpc/boot/rs6000.h @@ -239,5 +239,5 @@ struct external_reloc { #define DEFAULT_DATA_SECTION_ALIGNMENT 4 #define DEFAULT_BSS_SECTION_ALIGNMENT 4 #define DEFAULT_TEXT_SECTION_ALIGNMENT 4 -/* For new sections we havn't heard of before */ +/* For new sections we haven't heard of before */ #define DEFAULT_SECTION_ALIGNMENT 4 diff --git a/arch/powerpc/boot/treeboot-akebono.c b/arch/powerpc/boot/treeboot-akebono.c index b73174c34fe4..bcc5902f8462 100644 --- a/arch/powerpc/boot/treeboot-akebono.c +++ b/arch/powerpc/boot/treeboot-akebono.c @@ -38,7 +38,7 @@ BSS_STACK(4096); -#define SPRN_PIR 0x11E /* Processor Indentification Register */ +#define SPRN_PIR 0x11E /* Processor Identification Register */ #define USERDATA_LEN 256 /* Length of userdata passed in by PIBS */ #define MAX_RANKS 0x4 #define DDR3_MR0CF 0x80010011U diff --git a/arch/powerpc/boot/treeboot-currituck.c b/arch/powerpc/boot/treeboot-currituck.c index 925ae43b7467..303d2074ee56 100644 --- a/arch/powerpc/boot/treeboot-currituck.c +++ b/arch/powerpc/boot/treeboot-currituck.c @@ -80,7 +80,7 @@ static void ibm_currituck_fixups(void) } } -#define SPRN_PIR 0x11E /* Processor Indentification Register */ +#define SPRN_PIR 0x11E /* Processor Identification Register */ void platform_init(void) { unsigned long end_of_ram, avail_ram; diff --git a/arch/powerpc/boot/treeboot-iss4xx.c b/arch/powerpc/boot/treeboot-iss4xx.c index 329e710feda2..733f8bf25184 100644 --- a/arch/powerpc/boot/treeboot-iss4xx.c +++ b/arch/powerpc/boot/treeboot-iss4xx.c @@ -59,7 +59,7 @@ static void *iss_4xx_vmlinux_alloc(unsigned long size) return (void *)ibm4xx_memstart; } -#define SPRN_PIR 0x11E /* Processor Indentification Register */ +#define SPRN_PIR 0x11E /* Processor Identification Register */ void platform_init(void) { unsigned long end_of_ram = 0x08000000; diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index 2a5fdcbabcdd..87fc15bce407 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -35,7 +35,6 @@ CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_IDE=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y CONFIG_SCSI_SPI_ATTRS=y diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig index 3be85c5f1a2a..6f753a71fe5d 100644 --- a/arch/powerpc/configs/85xx/ksi8560_defconfig +++ b/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -34,7 +34,6 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_IDE=y CONFIG_NETDEVICES=y CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index f66d16ba8c58..b45190556c0c 100644 --- a/arch/powerpc/configs/85xx/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -31,8 +31,6 @@ CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=m CONFIG_SCSI=m CONFIG_BLK_DEV_SD=m CONFIG_CHR_DEV_ST=m diff --git a/arch/powerpc/configs/86xx-hw.config b/arch/powerpc/configs/86xx-hw.config new file mode 100644 index 000000000000..f91f8895fc93 --- /dev/null +++ b/arch/powerpc/configs/86xx-hw.config @@ -0,0 +1,104 @@ +CONFIG_ATA=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=y +CONFIG_BROADCOM_PHY=y +# CONFIG_CARDBUS is not set +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_ST=y +CONFIG_CRC_T10DIF=y +CONFIG_CRYPTO_HMAC=y +CONFIG_DS1682=y +CONFIG_EEPROM_LEGACY=y +CONFIG_GEF_WDT=y +CONFIG_GIANFAR=y +CONFIG_GPIO_GE_FPGA=y +CONFIG_GPIO_SYSFS=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SUNPLUS=y +CONFIG_HW_RANDOM=y +CONFIG_HZ_1000=y +CONFIG_I2C_MPC=y +CONFIG_I2C=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_LE_BYTE_SWAP=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_NAND_FSL_ELBC=y +CONFIG_MTD_NAND=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_NETDEVICES=y +CONFIG_NET_TULIP=y +CONFIG_NVRAM=y +CONFIG_PATA_ALI=y +CONFIG_PCCARD=y +CONFIG_PCI_DEBUG=y +# CONFIG_PCIEASPM is not set +CONFIG_PCIEPORTBUS=y +CONFIG_PCI=y +# CONFIG_PCMCIA_LOAD_CIS is not set +# CONFIG_PPC_CHRP is not set +# CONFIG_PPC_PMAC is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_CMOS=y +CONFIG_RTC_DRV_RX8581=y +CONFIG_SATA_AHCI=y +CONFIG_SATA_SIL24=y +CONFIG_SATA_SIL=y +CONFIG_SCSI_LOGGING=y +CONFIG_SENSORS_LM90=y +CONFIG_SENSORS_LM92=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250=y +CONFIG_SERIO_LIBPS2=y +CONFIG_SND_INTEL8X0=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_SND=y +CONFIG_SOUND=y +CONFIG_ULI526X=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y +CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB=y +CONFIG_VITESSE_PHY=y +CONFIG_VME_BUS=y +CONFIG_VME_TSI148=y +CONFIG_WATCHDOG=y +# CONFIG_YENTA_O2 is not set +# CONFIG_YENTA_RICOH is not set +# CONFIG_YENTA_TOSHIBA is not set +CONFIG_YENTA=y diff --git a/arch/powerpc/configs/86xx-smp.config b/arch/powerpc/configs/86xx-smp.config new file mode 100644 index 000000000000..40ac38d3038c --- /dev/null +++ b/arch/powerpc/configs/86xx-smp.config @@ -0,0 +1,2 @@ +CONFIG_NR_CPUS=2 +CONFIG_SMP=y diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig deleted file mode 100644 index 9792a2cb9b20..000000000000 --- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig +++ /dev/null @@ -1,216 +0,0 @@ -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set -CONFIG_PPC_86xx=y -CONFIG_GEF_PPC9A=y -CONFIG_HIGHMEM=y -CONFIG_HZ_1000=y -CONFIG_PREEMPT=y -CONFIG_BINFMT_MISC=m -CONFIG_PCI=y -CONFIG_PCIEPORTBUS=y -# CONFIG_PCIEASPM is not set -CONFIG_PCCARD=y -# CONFIG_PCMCIA_LOAD_CIS is not set -# CONFIG_CARDBUS is not set -CONFIG_YENTA=y -# CONFIG_YENTA_O2 is not set -# CONFIG_YENTA_RICOH is not set -# CONFIG_YENTA_TOSHIBA is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=m -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -# CONFIG_INET_XFRM_MODE_BEET is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NET_PKTGEN=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_DS1682=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECS=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -CONFIG_BLK_DEV_SR=y -CONFIG_ATA=y -CONFIG_SATA_SIL=y -CONFIG_NETDEVICES=y -CONFIG_BONDING=m -CONFIG_DUMMY=m -CONFIG_NETCONSOLE=y -CONFIG_TUN=m -CONFIG_GIANFAR=y -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOE=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_PCI is not set -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_HW_RANDOM=y -CONFIG_NVRAM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MPC=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_GE_FPGA=y -CONFIG_SENSORS_LM90=y -CONFIG_SENSORS_LM92=y -CONFIG_WATCHDOG=y -CONFIG_GEF_WDT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -CONFIG_HID_PANTHERLORD=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SUNPLUS=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_HCD_PPC_OF is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_INTF_PROC is not set -CONFIG_RTC_DRV_RX8581=y -CONFIG_STAGING=y -CONFIG_VME_BUS=y -CONFIG_VME_TSI148=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=850 -CONFIG_FAT_DEFAULT_IOCHARSET="ascii" -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_CIFS=m -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_CRC_CCITT=y -CONFIG_CRC_T10DIF=y -CONFIG_LIBCRC32C=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig deleted file mode 100644 index cadc36682bb4..000000000000 --- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig +++ /dev/null @@ -1,214 +0,0 @@ -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set -CONFIG_PPC_86xx=y -CONFIG_GEF_SBC310=y -CONFIG_HIGHMEM=y -CONFIG_HZ_1000=y -CONFIG_PREEMPT=y -CONFIG_BINFMT_MISC=y -CONFIG_PCI=y -CONFIG_PCIEPORTBUS=y -# CONFIG_PCIEASPM is not set -CONFIG_PCCARD=y -# CONFIG_PCMCIA_LOAD_CIS is not set -# CONFIG_CARDBUS is not set -CONFIG_YENTA=y -# CONFIG_YENTA_O2 is not set -# CONFIG_YENTA_RICOH is not set -# CONFIG_YENTA_TOSHIBA is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=m -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -# CONFIG_INET_XFRM_MODE_BEET is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NET_PKTGEN=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_DS1682=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECS=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -CONFIG_BLK_DEV_SR=y -CONFIG_ATA=y -CONFIG_SATA_SIL24=y -# CONFIG_ATA_SFF is not set -CONFIG_NETDEVICES=y -CONFIG_BONDING=m -CONFIG_DUMMY=m -CONFIG_NETCONSOLE=y -CONFIG_TUN=m -CONFIG_GIANFAR=y -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOE=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_PCI is not set -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_HW_RANDOM=y -CONFIG_NVRAM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MPC=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_GE_FPGA=y -CONFIG_SENSORS_LM90=y -CONFIG_SENSORS_LM92=y -CONFIG_WATCHDOG=y -CONFIG_GEF_WDT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -CONFIG_HID_PANTHERLORD=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SUNPLUS=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_HCD_PPC_OF is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_INTF_PROC is not set -CONFIG_RTC_DRV_RX8581=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=850 -CONFIG_FAT_DEFAULT_IOCHARSET="ascii" -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_CIFS=m -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_CRC_CCITT=y -CONFIG_CRC_T10DIF=y -CONFIG_LIBCRC32C=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig deleted file mode 100644 index 2aa7d9737e43..000000000000 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ /dev/null @@ -1,273 +0,0 @@ -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set -CONFIG_PPC_86xx=y -CONFIG_GEF_SBC610=y -CONFIG_HIGHMEM=y -CONFIG_HZ_1000=y -CONFIG_PREEMPT=y -CONFIG_BINFMT_MISC=m -CONFIG_PCI=y -CONFIG_PCIEPORTBUS=y -# CONFIG_PCIEASPM is not set -CONFIG_PCI_DEBUG=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=m -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -# CONFIG_INET_LRO is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -CONFIG_IP_SCTP=m -CONFIG_TIPC=m -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_PKTGEN=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_DS1682=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -CONFIG_BLK_DEV_SR=y -CONFIG_ATA=y -CONFIG_SATA_SIL=y -CONFIG_NETDEVICES=y -CONFIG_BONDING=m -CONFIG_DUMMY=m -CONFIG_NETCONSOLE=y -CONFIG_TUN=m -CONFIG_GIANFAR=y -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOATM=m -CONFIG_PPPOE=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -CONFIG_INPUT_FF_MEMLESS=m -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_PCI is not set -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_HW_RANDOM=y -CONFIG_NVRAM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MPC=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_GE_FPGA=y -CONFIG_SENSORS_LM90=y -CONFIG_SENSORS_LM92=y -CONFIG_WATCHDOG=y -CONFIG_GEF_WDT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -CONFIG_HID_PANTHERLORD=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SUNPLUS=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_HCD_PPC_OF is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_INTF_PROC is not set -CONFIG_RTC_DRV_RX8581=y -CONFIG_STAGING=y -CONFIG_VME_BUS=y -CONFIG_VME_TSI148=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_CIFS=m -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_DEBUG_INFO=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DETECT_HUNG_TASK=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_SECURITY=y -CONFIG_SECURITY_NETWORK=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig deleted file mode 100644 index e32207de2b77..000000000000 --- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig +++ /dev/null @@ -1,110 +0,0 @@ -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_ELF_CORE is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y -CONFIG_LDM_PARTITION=y -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set -CONFIG_PPC_86xx=y -CONFIG_MPC8610_HPCD=y -CONFIG_HIGHMEM=y -CONFIG_HZ_1000=y -CONFIG_FORCE_MAX_ZONEORDER=12 -# CONFIG_SECCOMP is not set -CONFIG_PCI=y -CONFIG_PCIEPORTBUS=y -# CONFIG_PCIEASPM is not set -CONFIG_PCI_DEBUG=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_LRO is not set -CONFIG_IPV6=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_FSL_ELBC=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_IDE=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_ATA=y -CONFIG_SATA_AHCI=y -CONFIG_PATA_ALI=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -CONFIG_NET_TULIP=y -CONFIG_ULI526X=y -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_MPC=y -# CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FB_FSL_DIU=y -CONFIG_VGACON_SOFT_SCROLLBACK=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -# CONFIG_SND_SUPPORT_OLD_API is not set -CONFIG_SND_SOC=y -CONFIG_SND_POWERPC_SOC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_CMOS=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -# CONFIG_DNOTIFY is not set -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -CONFIG_NLS=y -CONFIG_CRC_T10DIF=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_SHIRQ=y -CONFIG_DETECT_HUNG_TASK=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig deleted file mode 100644 index a36e11ddaebd..000000000000 --- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig +++ /dev/null @@ -1,156 +0,0 @@ -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_AUDIT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -# CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set -CONFIG_PPC_86xx=y -CONFIG_MPC8641_HPCN=y -CONFIG_HIGHMEM=y -CONFIG_HZ_1000=y -CONFIG_BINFMT_MISC=m -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_IPV6=y -CONFIG_IP_SCTP=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_EEPROM_LEGACY=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -CONFIG_BLK_DEV_SR=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_LOGGING=y -CONFIG_ATA=y -CONFIG_SATA_AHCI=y -CONFIG_PATA_ALI=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -CONFIG_GIANFAR=y -CONFIG_VITESSE_PHY=y -CONFIG_INPUT_FF_MEMLESS=m -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIO_LIBPS2=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_HW_RANDOM is not set -CONFIG_NVRAM=y -CONFIG_I2C=y -CONFIG_I2C_MPC=y -# CONFIG_HWMON is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -# CONFIG_SND_SUPPORT_OLD_API is not set -CONFIG_SND_INTEL8X0=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -CONFIG_HID_PANTHERLORD=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SUNPLUS=y -CONFIG_USB=y -CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF_BE=y -CONFIG_USB_OHCI_HCD_PPC_OF_LE=y -CONFIG_USB_STORAGE=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_CMOS=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_ADFS_FS=m -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_CRAMFS=y -CONFIG_VXFS_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -CONFIG_NFS_FS=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -CONFIG_CRC_T10DIF=y -CONFIG_DEBUG_INFO=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig deleted file mode 100644 index db79bdee844b..000000000000 --- a/arch/powerpc/configs/86xx/sbc8641d_defconfig +++ /dev/null @@ -1,246 +0,0 @@ -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set -CONFIG_PPC_86xx=y -CONFIG_SBC8641D=y -CONFIG_PREEMPT=y -CONFIG_BINFMT_MISC=m -CONFIG_PCI=y -CONFIG_PCIEPORTBUS=y -# CONFIG_PCIEASPM is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=m -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -# CONFIG_INET_LRO is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -CONFIG_IP_SCTP=m -CONFIG_TIPC=m -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_PKTGEN=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_LE_BYTE_SWAP=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID10=y -CONFIG_MD_MULTIPATH=y -CONFIG_MD_FAULTY=y -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=y -CONFIG_DM_SNAPSHOT=y -CONFIG_DM_MIRROR=y -CONFIG_DM_ZERO=y -CONFIG_NETDEVICES=y -CONFIG_BONDING=m -CONFIG_DUMMY=m -CONFIG_NETCONSOLE=y -CONFIG_TUN=m -CONFIG_GIANFAR=y -CONFIG_BROADCOM_PHY=y -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOATM=m -CONFIG_PPPOE=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_PCI is not set -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MPC=y -CONFIG_WATCHDOG=y -CONFIG_SOFT_WATCHDOG=m -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_REISERFS_FS=m -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_AUTOFS4_FS=m -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_MINIX_FS=m -CONFIG_ROMFS_FS=m -CONFIG_NFS_FS=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_CIFS=m -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_FS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DETECT_HUNG_TASK=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_SECURITY=y -CONFIG_SECURITY_NETWORK=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/powerpc/configs/mpc86xx_basic_defconfig b/arch/powerpc/configs/mpc86xx_basic_defconfig new file mode 100644 index 000000000000..33af5c5de105 --- /dev/null +++ b/arch/powerpc/configs/mpc86xx_basic_defconfig @@ -0,0 +1,10 @@ +CONFIG_HIGHMEM=y +CONFIG_KEXEC=y +CONFIG_PPC_86xx=y +CONFIG_PROC_KCORE=y +CONFIG_GEF_PPC9A=y +CONFIG_GEF_SBC310=y +CONFIG_GEF_SBC610=y +CONFIG_MPC8610_HPCD=y +CONFIG_MPC8641_HPCN=y +CONFIG_SBC8641D=y diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig deleted file mode 100644 index a4572563681c..000000000000 --- a/arch/powerpc/configs/mpc86xx_defconfig +++ /dev/null @@ -1,162 +0,0 @@ -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_AUDIT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -# CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set -CONFIG_PPC_86xx=y -CONFIG_MPC8641_HPCN=y -CONFIG_SBC8641D=y -CONFIG_MPC8610_HPCD=y -CONFIG_GEF_SBC610=y -CONFIG_HIGHMEM=y -CONFIG_HZ_1000=y -CONFIG_BINFMT_MISC=m -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_IPV6=y -CONFIG_IP_SCTP=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_EEPROM_LEGACY=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -CONFIG_BLK_DEV_SR=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_LOGGING=y -CONFIG_ATA=y -CONFIG_SATA_AHCI=y -CONFIG_PATA_ALI=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -CONFIG_GIANFAR=y -CONFIG_VITESSE_PHY=y -CONFIG_INPUT_FF_MEMLESS=m -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIO_LIBPS2=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_HW_RANDOM is not set -CONFIG_NVRAM=y -CONFIG_I2C=y -CONFIG_I2C_MPC=y -# CONFIG_HWMON is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -# CONFIG_SND_SUPPORT_OLD_API is not set -CONFIG_SND_INTEL8X0=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -CONFIG_HID_PANTHERLORD=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SUNPLUS=y -CONFIG_USB=y -CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF_BE=y -CONFIG_USB_OHCI_HCD_PPC_OF_LE=y -CONFIG_USB_STORAGE=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_CMOS=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_ADFS_FS=m -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_CRAMFS=y -CONFIG_VXFS_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -CONFIG_NFS_FS=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_CRC_T10DIF=y -CONFIG_DEBUG_INFO=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/powerpc/configs/powernv_defconfig b/arch/powerpc/configs/powernv_defconfig new file mode 100644 index 000000000000..045031048f8d --- /dev/null +++ b/arch/powerpc/configs/powernv_defconfig @@ -0,0 +1,313 @@ +CONFIG_PPC64=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2048 +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_AUDIT=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_NUMA_BALANCING=y +CONFIG_CGROUPS=y +CONFIG_MEMCG=y +CONFIG_MEMCG_SWAP=y +CONFIG_CGROUP_SCHED=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +CONFIG_USER_NS=y +CONFIG_BLK_DEV_INITRD=y +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_JUMP_LABEL=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_OPAL_PRD=y +# CONFIG_PPC_PSERIES is not set +# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_IDLE=y +CONFIG_HZ_100=y +CONFIG_BINFMT_MISC=m +CONFIG_PPC_TRANSACTIONAL_MEM=y +CONFIG_HOTPLUG_CPU=y +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +CONFIG_NUMA=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTREMOVE=y +CONFIG_KSM=y +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_PPC_64K_PAGES=y +CONFIG_PPC_SUBPAGE_PROT=y +CONFIG_SCHED_SMT=y +CONFIG_PM=y +CONFIG_PCI_MSI=y +CONFIG_HOTPLUG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_NET_IPIP=y +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_ADVANCED is not set +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_MTD=y +CONFIG_MTD_POWERNV_FLASH=y +CONFIG_PARPORT=m +CONFIG_PARPORT_PC=m +CONFIG_BLK_DEV_FD=m +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_VIRTIO_BLK=m +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_AMD74XX=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_FC_ATTRS=y +CONFIG_SCSI_SRP_ATTRS=y +CONFIG_SCSI_CXGB3_ISCSI=m +CONFIG_SCSI_CXGB4_ISCSI=m +CONFIG_SCSI_BNX2_ISCSI=m +CONFIG_BE2ISCSI=m +CONFIG_SCSI_MPT2SAS=m +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 +CONFIG_SCSI_IPR=y +CONFIG_SCSI_QLA_FC=m +CONFIG_SCSI_QLA_ISCSI=m +CONFIG_SCSI_LPFC=m +CONFIG_SCSI_VIRTIO=m +CONFIG_SCSI_DH=y +CONFIG_SCSI_DH_RDAC=m +CONFIG_SCSI_DH_ALUA=m +CONFIG_ATA=y +CONFIG_SATA_AHCI=y +# CONFIG_ATA_SFF is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m +CONFIG_DM_UEVENT=y +CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=y +CONFIG_TUN=m +CONFIG_VETH=m +CONFIG_VIRTIO_NET=m +CONFIG_VHOST_NET=m +CONFIG_VORTEX=y +CONFIG_ACENIC=m +CONFIG_ACENIC_OMIT_TIGON_I=y +CONFIG_PCNET32=y +CONFIG_TIGON3=y +CONFIG_BNX2X=m +CONFIG_CHELSIO_T1=m +CONFIG_BE2NET=m +CONFIG_S2IO=m +CONFIG_E100=y +CONFIG_E1000=y +CONFIG_E1000E=y +CONFIG_IXGB=m +CONFIG_IXGBE=m +CONFIG_MLX4_EN=m +CONFIG_MYRI10GE=m +CONFIG_QLGE=m +CONFIG_NETXEN_NIC=m +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPPOE=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_MISC=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_JSM=m +CONFIG_VIRTIO_CONSOLE=m +CONFIG_IPMI_HANDLER=y +CONFIG_IPMI_DEVICE_INTERFACE=y +CONFIG_IPMI_POWERNV=y +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=1024 +CONFIG_DRM=y +CONFIG_DRM_AST=y +CONFIG_FIRMWARE_EDID=y +CONFIG_FB_OF=y +CONFIG_FB_MATROX=y +CONFIG_FB_MATROX_MILLENIUM=y +CONFIG_FB_MATROX_MYSTIQUE=y +CONFIG_FB_MATROX_G=y +CONFIG_FB_RADEON=y +CONFIG_FB_IBM_GXT4500=y +CONFIG_LCD_PLATFORM=m +# CONFIG_VGA_CONSOLE is not set +CONFIG_LOGO=y +CONFIG_HID_GYRATION=y +CONFIG_HID_PANTHERLORD=y +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SUNPLUS=y +CONFIG_USB_HIDDEV=y +CONFIG_USB=y +CONFIG_USB_MON=m +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_HCD_PPC_OF is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_STORAGE=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m +CONFIG_LEDS_POWERNV=m +CONFIG_INFINIBAND=m +CONFIG_INFINIBAND_USER_MAD=m +CONFIG_INFINIBAND_USER_ACCESS=m +CONFIG_INFINIBAND_MTHCA=m +CONFIG_INFINIBAND_CXGB3=m +CONFIG_INFINIBAND_CXGB4=m +CONFIG_MLX4_INFINIBAND=m +CONFIG_INFINIBAND_IPOIB=m +CONFIG_INFINIBAND_IPOIB_CM=y +CONFIG_INFINIBAND_SRP=m +CONFIG_INFINIBAND_ISER=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=y +CONFIG_VIRTIO_PCI=m +CONFIG_VIRTIO_BALLOON=m +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_REISERFS_FS=y +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +CONFIG_XFS_FS=m +CONFIG_XFS_POSIX_ACL=y +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_NILFS2_FS=m +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m +CONFIG_OVERLAY_FS=m +CONFIG_ISO9660_FS=y +CONFIG_UDF_FS=m +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_HUGETLBFS=y +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +CONFIG_PSTORE=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFSD=m +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_CIFS=m +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_STACK_USAGE=y +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_LOCKUP_DETECTOR=y +CONFIG_LATENCYTOP=y +CONFIG_SCHED_TRACER=y +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_CODE_PATCHING_SELFTEST=y +CONFIG_FTR_FIXUP_SELFTEST=y +CONFIG_MSI_BITMAP_SELFTEST=y +CONFIG_XMON=y +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_LZO=m +CONFIG_CRYPTO_DEV_NX=y +CONFIG_VIRTUALIZATION=y +CONFIG_KVM_BOOK3S_64=m +CONFIG_KVM_BOOK3S_64_HV=m diff --git a/arch/powerpc/crypto/aes-spe-core.S b/arch/powerpc/crypto/aes-spe-core.S index 5dc6bce90a77..bc6ff43a9889 100644 --- a/arch/powerpc/crypto/aes-spe-core.S +++ b/arch/powerpc/crypto/aes-spe-core.S @@ -61,7 +61,7 @@ * via bl/blr. It expects that caller has pre-xored input data with first * 4 words of encryption key into rD0-rD3. Pointer/counter registers must * have also been set up before (rT0, rKP, CTR). Output is stored in rD0-rD3 - * and rW0-rW3 and caller must execute a final xor on the ouput registers. + * and rW0-rW3 and caller must execute a final xor on the output registers. * All working registers rD0-rD3 & rW0-rW7 are overwritten during processing. * */ @@ -209,7 +209,7 @@ ppc_encrypt_block_loop: * via bl/blr. It expects that caller has pre-xored input data with first * 4 words of encryption key into rD0-rD3. Pointer/counter registers must * have also been set up before (rT0, rKP, CTR). Output is stored in rD0-rD3 - * and rW0-rW3 and caller must execute a final xor on the ouput registers. + * and rW0-rW3 and caller must execute a final xor on the output registers. * All working registers rD0-rD3 & rW0-rW7 are overwritten during processing. * */ diff --git a/arch/powerpc/crypto/aes-spe-glue.c b/arch/powerpc/crypto/aes-spe-glue.c index ab113198ed20..748fc00c5e19 100644 --- a/arch/powerpc/crypto/aes-spe-glue.c +++ b/arch/powerpc/crypto/aes-spe-glue.c @@ -33,7 +33,7 @@ * 16 byte block block or 25 cycles per byte. Thus 768 bytes of input data * will need an estimated maximum of 20,000 cycles. Headroom for cache misses * included. Even with the low end model clocked at 667 MHz this equals to a - * critical time window of less than 30us. The value has been choosen to + * critical time window of less than 30us. The value has been chosen to * process a 512 byte disk block in one or a large 1400 bytes IPsec network * packet in two runs. * diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h index 55f106ed12bf..ae0751ef8788 100644 --- a/arch/powerpc/include/asm/atomic.h +++ b/arch/powerpc/include/asm/atomic.h @@ -12,6 +12,24 @@ #define ATOMIC_INIT(i) { (i) } +/* + * Since *_return_relaxed and {cmp}xchg_relaxed are implemented with + * a "bne-" instruction at the end, so an isync is enough as a acquire barrier + * on the platform without lwsync. + */ +#define __atomic_op_acquire(op, args...) \ +({ \ + typeof(op##_relaxed(args)) __ret = op##_relaxed(args); \ + __asm__ __volatile__(PPC_ACQUIRE_BARRIER "" : : : "memory"); \ + __ret; \ +}) + +#define __atomic_op_release(op, args...) \ +({ \ + __asm__ __volatile__(PPC_RELEASE_BARRIER "" : : : "memory"); \ + op##_relaxed(args); \ +}) + static __inline__ int atomic_read(const atomic_t *v) { int t; @@ -42,27 +60,27 @@ static __inline__ void atomic_##op(int a, atomic_t *v) \ : "cc"); \ } \ -#define ATOMIC_OP_RETURN(op, asm_op) \ -static __inline__ int atomic_##op##_return(int a, atomic_t *v) \ +#define ATOMIC_OP_RETURN_RELAXED(op, asm_op) \ +static inline int atomic_##op##_return_relaxed(int a, atomic_t *v) \ { \ int t; \ \ __asm__ __volatile__( \ - PPC_ATOMIC_ENTRY_BARRIER \ -"1: lwarx %0,0,%2 # atomic_" #op "_return\n" \ - #asm_op " %0,%1,%0\n" \ - PPC405_ERR77(0,%2) \ -" stwcx. %0,0,%2 \n" \ +"1: lwarx %0,0,%3 # atomic_" #op "_return_relaxed\n" \ + #asm_op " %0,%2,%0\n" \ + PPC405_ERR77(0, %3) \ +" stwcx. %0,0,%3\n" \ " bne- 1b\n" \ - PPC_ATOMIC_EXIT_BARRIER \ - : "=&r" (t) \ + : "=&r" (t), "+m" (v->counter) \ : "r" (a), "r" (&v->counter) \ - : "cc", "memory"); \ + : "cc"); \ \ return t; \ } -#define ATOMIC_OPS(op, asm_op) ATOMIC_OP(op, asm_op) ATOMIC_OP_RETURN(op, asm_op) +#define ATOMIC_OPS(op, asm_op) \ + ATOMIC_OP(op, asm_op) \ + ATOMIC_OP_RETURN_RELAXED(op, asm_op) ATOMIC_OPS(add, add) ATOMIC_OPS(sub, subf) @@ -71,8 +89,11 @@ ATOMIC_OP(and, and) ATOMIC_OP(or, or) ATOMIC_OP(xor, xor) +#define atomic_add_return_relaxed atomic_add_return_relaxed +#define atomic_sub_return_relaxed atomic_sub_return_relaxed + #undef ATOMIC_OPS -#undef ATOMIC_OP_RETURN +#undef ATOMIC_OP_RETURN_RELAXED #undef ATOMIC_OP #define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) @@ -92,21 +113,19 @@ static __inline__ void atomic_inc(atomic_t *v) : "cc", "xer"); } -static __inline__ int atomic_inc_return(atomic_t *v) +static __inline__ int atomic_inc_return_relaxed(atomic_t *v) { int t; __asm__ __volatile__( - PPC_ATOMIC_ENTRY_BARRIER -"1: lwarx %0,0,%1 # atomic_inc_return\n\ - addic %0,%0,1\n" - PPC405_ERR77(0,%1) -" stwcx. %0,0,%1 \n\ - bne- 1b" - PPC_ATOMIC_EXIT_BARRIER - : "=&r" (t) +"1: lwarx %0,0,%2 # atomic_inc_return_relaxed\n" +" addic %0,%0,1\n" + PPC405_ERR77(0, %2) +" stwcx. %0,0,%2\n" +" bne- 1b" + : "=&r" (t), "+m" (v->counter) : "r" (&v->counter) - : "cc", "xer", "memory"); + : "cc", "xer"); return t; } @@ -136,27 +155,34 @@ static __inline__ void atomic_dec(atomic_t *v) : "cc", "xer"); } -static __inline__ int atomic_dec_return(atomic_t *v) +static __inline__ int atomic_dec_return_relaxed(atomic_t *v) { int t; __asm__ __volatile__( - PPC_ATOMIC_ENTRY_BARRIER -"1: lwarx %0,0,%1 # atomic_dec_return\n\ - addic %0,%0,-1\n" - PPC405_ERR77(0,%1) -" stwcx. %0,0,%1\n\ - bne- 1b" - PPC_ATOMIC_EXIT_BARRIER - : "=&r" (t) +"1: lwarx %0,0,%2 # atomic_dec_return_relaxed\n" +" addic %0,%0,-1\n" + PPC405_ERR77(0, %2) +" stwcx. %0,0,%2\n" +" bne- 1b" + : "=&r" (t), "+m" (v->counter) : "r" (&v->counter) - : "cc", "xer", "memory"); + : "cc", "xer"); return t; } +#define atomic_inc_return_relaxed atomic_inc_return_relaxed +#define atomic_dec_return_relaxed atomic_dec_return_relaxed + #define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) +#define atomic_cmpxchg_relaxed(v, o, n) \ + cmpxchg_relaxed(&((v)->counter), (o), (n)) +#define atomic_cmpxchg_acquire(v, o, n) \ + cmpxchg_acquire(&((v)->counter), (o), (n)) + #define atomic_xchg(v, new) (xchg(&((v)->counter), new)) +#define atomic_xchg_relaxed(v, new) xchg_relaxed(&((v)->counter), (new)) /** * __atomic_add_unless - add unless the number is a given value @@ -285,26 +311,27 @@ static __inline__ void atomic64_##op(long a, atomic64_t *v) \ : "cc"); \ } -#define ATOMIC64_OP_RETURN(op, asm_op) \ -static __inline__ long atomic64_##op##_return(long a, atomic64_t *v) \ +#define ATOMIC64_OP_RETURN_RELAXED(op, asm_op) \ +static inline long \ +atomic64_##op##_return_relaxed(long a, atomic64_t *v) \ { \ long t; \ \ __asm__ __volatile__( \ - PPC_ATOMIC_ENTRY_BARRIER \ -"1: ldarx %0,0,%2 # atomic64_" #op "_return\n" \ - #asm_op " %0,%1,%0\n" \ -" stdcx. %0,0,%2 \n" \ +"1: ldarx %0,0,%3 # atomic64_" #op "_return_relaxed\n" \ + #asm_op " %0,%2,%0\n" \ +" stdcx. %0,0,%3\n" \ " bne- 1b\n" \ - PPC_ATOMIC_EXIT_BARRIER \ - : "=&r" (t) \ + : "=&r" (t), "+m" (v->counter) \ : "r" (a), "r" (&v->counter) \ - : "cc", "memory"); \ + : "cc"); \ \ return t; \ } -#define ATOMIC64_OPS(op, asm_op) ATOMIC64_OP(op, asm_op) ATOMIC64_OP_RETURN(op, asm_op) +#define ATOMIC64_OPS(op, asm_op) \ + ATOMIC64_OP(op, asm_op) \ + ATOMIC64_OP_RETURN_RELAXED(op, asm_op) ATOMIC64_OPS(add, add) ATOMIC64_OPS(sub, subf) @@ -312,8 +339,11 @@ ATOMIC64_OP(and, and) ATOMIC64_OP(or, or) ATOMIC64_OP(xor, xor) -#undef ATOMIC64_OPS -#undef ATOMIC64_OP_RETURN +#define atomic64_add_return_relaxed atomic64_add_return_relaxed +#define atomic64_sub_return_relaxed atomic64_sub_return_relaxed + +#undef ATOPIC64_OPS +#undef ATOMIC64_OP_RETURN_RELAXED #undef ATOMIC64_OP #define atomic64_add_negative(a, v) (atomic64_add_return((a), (v)) < 0) @@ -332,20 +362,18 @@ static __inline__ void atomic64_inc(atomic64_t *v) : "cc", "xer"); } -static __inline__ long atomic64_inc_return(atomic64_t *v) +static __inline__ long atomic64_inc_return_relaxed(atomic64_t *v) { long t; __asm__ __volatile__( - PPC_ATOMIC_ENTRY_BARRIER -"1: ldarx %0,0,%1 # atomic64_inc_return\n\ - addic %0,%0,1\n\ - stdcx. %0,0,%1 \n\ - bne- 1b" - PPC_ATOMIC_EXIT_BARRIER - : "=&r" (t) +"1: ldarx %0,0,%2 # atomic64_inc_return_relaxed\n" +" addic %0,%0,1\n" +" stdcx. %0,0,%2\n" +" bne- 1b" + : "=&r" (t), "+m" (v->counter) : "r" (&v->counter) - : "cc", "xer", "memory"); + : "cc", "xer"); return t; } @@ -374,24 +402,25 @@ static __inline__ void atomic64_dec(atomic64_t *v) : "cc", "xer"); } -static __inline__ long atomic64_dec_return(atomic64_t *v) +static __inline__ long atomic64_dec_return_relaxed(atomic64_t *v) { long t; __asm__ __volatile__( - PPC_ATOMIC_ENTRY_BARRIER -"1: ldarx %0,0,%1 # atomic64_dec_return\n\ - addic %0,%0,-1\n\ - stdcx. %0,0,%1\n\ - bne- 1b" - PPC_ATOMIC_EXIT_BARRIER - : "=&r" (t) +"1: ldarx %0,0,%2 # atomic64_dec_return_relaxed\n" +" addic %0,%0,-1\n" +" stdcx. %0,0,%2\n" +" bne- 1b" + : "=&r" (t), "+m" (v->counter) : "r" (&v->counter) - : "cc", "xer", "memory"); + : "cc", "xer"); return t; } +#define atomic64_inc_return_relaxed atomic64_inc_return_relaxed +#define atomic64_dec_return_relaxed atomic64_dec_return_relaxed + #define atomic64_sub_and_test(a, v) (atomic64_sub_return((a), (v)) == 0) #define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0) @@ -420,7 +449,13 @@ static __inline__ long atomic64_dec_if_positive(atomic64_t *v) } #define atomic64_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) +#define atomic64_cmpxchg_relaxed(v, o, n) \ + cmpxchg_relaxed(&((v)->counter), (o), (n)) +#define atomic64_cmpxchg_acquire(v, o, n) \ + cmpxchg_acquire(&((v)->counter), (o), (n)) + #define atomic64_xchg(v, new) (xchg(&((v)->counter), new)) +#define atomic64_xchg_relaxed(v, new) xchg_relaxed(&((v)->counter), (new)) /** * atomic64_add_unless - add unless the number is a given value diff --git a/arch/powerpc/include/asm/mmu-hash32.h b/arch/powerpc/include/asm/book3s/32/mmu-hash.h index 16f513e5cbd7..16f513e5cbd7 100644 --- a/arch/powerpc/include/asm/mmu-hash32.h +++ b/arch/powerpc/include/asm/book3s/32/mmu-hash.h diff --git a/arch/powerpc/include/asm/book3s/64/hash-4k.h b/arch/powerpc/include/asm/book3s/64/hash-4k.h index ea0414d6659e..5f08a0832238 100644 --- a/arch/powerpc/include/asm/book3s/64/hash-4k.h +++ b/arch/powerpc/include/asm/book3s/64/hash-4k.h @@ -52,44 +52,14 @@ _PAGE_F_SECOND | _PAGE_F_GIX) /* shift to put page number into pte */ -#define PTE_RPN_SHIFT (18) +#define PTE_RPN_SHIFT (12) +#define PTE_RPN_SIZE (45) /* gives 57-bit real addresses */ #define _PAGE_4K_PFN 0 #ifndef __ASSEMBLY__ /* - * 4-level page tables related bits + * On all 4K setups, remap_4k_pfn() equates to remap_pfn_range() */ - -#define pgd_none(pgd) (!pgd_val(pgd)) -#define pgd_bad(pgd) (pgd_val(pgd) == 0) -#define pgd_present(pgd) (pgd_val(pgd) != 0) -#define pgd_page_vaddr(pgd) (pgd_val(pgd) & ~PGD_MASKED_BITS) - -static inline void pgd_clear(pgd_t *pgdp) -{ - *pgdp = __pgd(0); -} - -static inline pte_t pgd_pte(pgd_t pgd) -{ - return __pte(pgd_val(pgd)); -} - -static inline pgd_t pte_pgd(pte_t pte) -{ - return __pgd(pte_val(pte)); -} -extern struct page *pgd_page(pgd_t pgd); - -#define pud_offset(pgdp, addr) \ - (((pud_t *) pgd_page_vaddr(*(pgdp))) + \ - (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))) - -#define pud_ERROR(e) \ - pr_err("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e)) - -/* - * On all 4K setups, remap_4k_pfn() equates to remap_pfn_range() */ #define remap_4k_pfn(vma, addr, pfn, prot) \ remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot)) diff --git a/arch/powerpc/include/asm/book3s/64/hash-64k.h b/arch/powerpc/include/asm/book3s/64/hash-64k.h index 849bbec80f7b..0a7956a80a08 100644 --- a/arch/powerpc/include/asm/book3s/64/hash-64k.h +++ b/arch/powerpc/include/asm/book3s/64/hash-64k.h @@ -1,15 +1,14 @@ #ifndef _ASM_POWERPC_BOOK3S_64_HASH_64K_H #define _ASM_POWERPC_BOOK3S_64_HASH_64K_H -#include <asm-generic/pgtable-nopud.h> - #define PTE_INDEX_SIZE 8 -#define PMD_INDEX_SIZE 10 -#define PUD_INDEX_SIZE 0 +#define PMD_INDEX_SIZE 5 +#define PUD_INDEX_SIZE 5 #define PGD_INDEX_SIZE 12 #define PTRS_PER_PTE (1 << PTE_INDEX_SIZE) #define PTRS_PER_PMD (1 << PMD_INDEX_SIZE) +#define PTRS_PER_PUD (1 << PUD_INDEX_SIZE) #define PTRS_PER_PGD (1 << PGD_INDEX_SIZE) /* With 4k base page size, hugepage PTEs go at the PMD level */ @@ -20,13 +19,18 @@ #define PMD_SIZE (1UL << PMD_SHIFT) #define PMD_MASK (~(PMD_SIZE-1)) -/* PGDIR_SHIFT determines what a third-level page table entry can map */ -#define PGDIR_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE) +/* PUD_SHIFT determines what a third-level page table entry can map */ +#define PUD_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE) +#define PUD_SIZE (1UL << PUD_SHIFT) +#define PUD_MASK (~(PUD_SIZE-1)) + +/* PGDIR_SHIFT determines what a fourth-level page table entry can map */ +#define PGDIR_SHIFT (PUD_SHIFT + PUD_INDEX_SIZE) #define PGDIR_SIZE (1UL << PGDIR_SHIFT) #define PGDIR_MASK (~(PGDIR_SIZE-1)) -#define _PAGE_COMBO 0x00040000 /* this is a combo 4k page */ -#define _PAGE_4K_PFN 0x00080000 /* PFN is for a single 4k page */ +#define _PAGE_COMBO 0x00001000 /* this is a combo 4k page */ +#define _PAGE_4K_PFN 0x00002000 /* PFN is for a single 4k page */ /* * Used to track subpage group valid if _PAGE_COMBO is set * This overloads _PAGE_F_GIX and _PAGE_F_SECOND @@ -39,10 +43,12 @@ /* Shift to put page number into pte. * - * That gives us a max RPN of 34 bits, which means a max of 50 bits - * of addressable physical space, or 46 bits for the special 4k PFNs. + * That gives us a max RPN of 41 bits, which means a max of 57 bits + * of addressable physical space, or 53 bits for the special 4k PFNs. */ -#define PTE_RPN_SHIFT (30) +#define PTE_RPN_SHIFT (16) +#define PTE_RPN_SIZE (41) + /* * we support 16 fragments per PTE page of 64K size. */ @@ -54,13 +60,12 @@ #define PTE_FRAG_SIZE_SHIFT 12 #define PTE_FRAG_SIZE (1UL << PTE_FRAG_SIZE_SHIFT) -/* - * Bits to mask out from a PMD to get to the PTE page - * PMDs point to PTE table fragments which are PTE_FRAG_SIZE aligned. - */ -#define PMD_MASKED_BITS (PTE_FRAG_SIZE - 1) -/* Bits to mask out from a PGD/PUD to get to the PMD page */ -#define PUD_MASKED_BITS 0x1ff +/* Bits to mask out from a PMD to get to the PTE page */ +#define PMD_MASKED_BITS 0xc0000000000000ffUL +/* Bits to mask out from a PUD to get to the PMD page */ +#define PUD_MASKED_BITS 0xc0000000000000ffUL +/* Bits to mask out from a PGD to get to the PUD page */ +#define PGD_MASKED_BITS 0xc0000000000000ffUL #ifndef __ASSEMBLY__ @@ -120,7 +125,7 @@ extern bool __rpte_sub_valid(real_pte_t rpte, unsigned long index); (((pte) & _PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K) #define remap_4k_pfn(vma, addr, pfn, prot) \ - (WARN_ON(((pfn) >= (1UL << (64 - PTE_RPN_SHIFT)))) ? -EINVAL : \ + (WARN_ON(((pfn) >= (1UL << PTE_RPN_SIZE))) ? -EINVAL : \ remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, \ __pgprot(pgprot_val((prot)) | _PAGE_4K_PFN))) @@ -130,11 +135,9 @@ extern bool __rpte_sub_valid(real_pte_t rpte, unsigned long index); #else #define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE) #endif +#define PUD_TABLE_SIZE (sizeof(pud_t) << PUD_INDEX_SIZE) #define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE) -#define pgd_pte(pgd) (pud_pte(((pud_t){ pgd }))) -#define pte_pgd(pte) ((pgd_t)pte_pud(pte)) - #ifdef CONFIG_HUGETLB_PAGE /* * We have PGD_INDEX_SIZ = 12 and PTE_INDEX_SIZE = 8, so that we can have @@ -208,30 +211,30 @@ static inline char *get_hpte_slot_array(pmd_t *pmdp) /* * The linux hugepage PMD now include the pmd entries followed by the address * to the stashed pgtable_t. The stashed pgtable_t contains the hpte bits. - * [ 1 bit secondary | 3 bit hidx | 1 bit valid | 000]. We use one byte per + * [ 000 | 1 bit secondary | 3 bit hidx | 1 bit valid]. We use one byte per * each HPTE entry. With 16MB hugepage and 64K HPTE we need 256 entries and * with 4K HPTE we need 4096 entries. Both will fit in a 4K pgtable_t. * - * The last three bits are intentionally left to zero. This memory location + * The top three bits are intentionally left as zero. This memory location * are also used as normal page PTE pointers. So if we have any pointers * left around while we collapse a hugepage, we need to make sure * _PAGE_PRESENT bit of that is zero when we look at them */ static inline unsigned int hpte_valid(unsigned char *hpte_slot_array, int index) { - return (hpte_slot_array[index] >> 3) & 0x1; + return hpte_slot_array[index] & 0x1; } static inline unsigned int hpte_hash_index(unsigned char *hpte_slot_array, int index) { - return hpte_slot_array[index] >> 4; + return hpte_slot_array[index] >> 1; } static inline void mark_hpte_slot_valid(unsigned char *hpte_slot_array, unsigned int index, unsigned int hidx) { - hpte_slot_array[index] = hidx << 4 | 0x1 << 3; + hpte_slot_array[index] = (hidx << 1) | 0x1; } /* diff --git a/arch/powerpc/include/asm/book3s/64/hash.h b/arch/powerpc/include/asm/book3s/64/hash.h index 8d1c8162f0c1..d0ee6fcef823 100644 --- a/arch/powerpc/include/asm/book3s/64/hash.h +++ b/arch/powerpc/include/asm/book3s/64/hash.h @@ -4,8 +4,7 @@ /* * Common bits between 4K and 64K pages in a linux-style PTE. - * These match the bits in the (hardware-defined) PowerPC PTE as closely - * as possible. Additional bits may be defined in pgtable-hash64-*.h + * Additional bits may be defined in pgtable-hash64-*.h * * Note: We only support user read/write permissions. Supervisor always * have full read/write to pages above PAGE_OFFSET (pages below that @@ -14,32 +13,35 @@ * We could create separate kernel read-only if we used the 3 PP bits * combinations that newer processors provide but we currently don't. */ -#define _PAGE_PTE 0x00001 -#define _PAGE_PRESENT 0x00002 /* software: pte contains a translation */ -#define _PAGE_BIT_SWAP_TYPE 2 -#define _PAGE_USER 0x00004 /* matches one of the PP bits */ -#define _PAGE_EXEC 0x00008 /* No execute on POWER4 and newer (we invert) */ -#define _PAGE_GUARDED 0x00010 -/* We can derive Memory coherence from _PAGE_NO_CACHE */ +#define _PAGE_BIT_SWAP_TYPE 0 + +#define _PAGE_EXEC 0x00001 /* execute permission */ +#define _PAGE_RW 0x00002 /* read & write access allowed */ +#define _PAGE_READ 0x00004 /* read access allowed */ +#define _PAGE_USER 0x00008 /* page may be accessed by userspace */ +#define _PAGE_GUARDED 0x00010 /* G: guarded (side-effect) page */ +/* M (memory coherence) is always set in the HPTE, so we don't need it here */ #define _PAGE_COHERENT 0x0 #define _PAGE_NO_CACHE 0x00020 /* I: cache inhibit */ #define _PAGE_WRITETHRU 0x00040 /* W: cache write-through */ #define _PAGE_DIRTY 0x00080 /* C: page changed */ #define _PAGE_ACCESSED 0x00100 /* R: page referenced */ -#define _PAGE_RW 0x00200 /* software: user write access allowed */ -#define _PAGE_HASHPTE 0x00400 /* software: pte has an associated HPTE */ +#define _PAGE_SPECIAL 0x00400 /* software: special page */ #define _PAGE_BUSY 0x00800 /* software: PTE & hash are busy */ -#define _PAGE_F_GIX 0x07000 /* full page: hidx bits */ -#define _PAGE_F_GIX_SHIFT 12 -#define _PAGE_F_SECOND 0x08000 /* Whether to use secondary hash or not */ -#define _PAGE_SPECIAL 0x10000 /* software: special page */ #ifdef CONFIG_MEM_SOFT_DIRTY -#define _PAGE_SOFT_DIRTY 0x20000 /* software: software dirty tracking */ +#define _PAGE_SOFT_DIRTY 0x200 /* software: software dirty tracking */ #else -#define _PAGE_SOFT_DIRTY 0x00000 +#define _PAGE_SOFT_DIRTY 0x000 #endif +#define _PAGE_F_GIX_SHIFT 57 +#define _PAGE_F_GIX (7ul << 57) /* HPTE index within HPTEG */ +#define _PAGE_F_SECOND (1ul << 60) /* HPTE is in 2ndary HPTEG */ +#define _PAGE_HASHPTE (1ul << 61) /* PTE has associated HPTE */ +#define _PAGE_PTE (1ul << 62) /* distinguishes PTEs from pointers */ +#define _PAGE_PRESENT (1ul << 63) /* pte contains a translation */ + /* * We need to differentiate between explicit huge page and THP huge * page, since THP huge page also need to track real subpage details @@ -132,7 +134,7 @@ * The mask convered by the RPN must be a ULL on 32-bit platforms with * 64-bit PTEs */ -#define PTE_RPN_MASK (~((1UL << PTE_RPN_SHIFT) - 1)) +#define PTE_RPN_MASK (((1UL << PTE_RPN_SIZE) - 1) << PTE_RPN_SHIFT) /* * _PAGE_CHG_MASK masks of bits that are to be preserved across * pgprot changes @@ -223,15 +225,17 @@ #define PUD_BAD_BITS (PMD_TABLE_SIZE-1) #ifndef __ASSEMBLY__ -#define pmd_bad(pmd) (!is_kernel_addr(pmd_val(pmd)) \ - || (pmd_val(pmd) & PMD_BAD_BITS)) -#define pmd_page_vaddr(pmd) (pmd_val(pmd) & ~PMD_MASKED_BITS) +#define pmd_bad(pmd) (pmd_val(pmd) & PMD_BAD_BITS) +#define pmd_page_vaddr(pmd) __va(pmd_val(pmd) & ~PMD_MASKED_BITS) + +#define pud_bad(pud) (pud_val(pud) & PUD_BAD_BITS) +#define pud_page_vaddr(pud) __va(pud_val(pud) & ~PUD_MASKED_BITS) -#define pud_bad(pud) (!is_kernel_addr(pud_val(pud)) \ - || (pud_val(pud) & PUD_BAD_BITS)) -#define pud_page_vaddr(pud) (pud_val(pud) & ~PUD_MASKED_BITS) +/* Pointers in the page table tree are physical addresses */ +#define __pgtable_ptr_val(ptr) __pa(ptr) #define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & (PTRS_PER_PGD - 1)) +#define pud_index(address) (((address) >> (PUD_SHIFT)) & (PTRS_PER_PUD - 1)) #define pmd_index(address) (((address) >> (PMD_SHIFT)) & (PTRS_PER_PMD - 1)) #define pte_index(address) (((address) >> (PAGE_SHIFT)) & (PTRS_PER_PTE - 1)) @@ -360,8 +364,18 @@ static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry) :"cc"); } +static inline int pgd_bad(pgd_t pgd) +{ + return (pgd_val(pgd) == 0); +} + #define __HAVE_ARCH_PTE_SAME #define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0) +static inline unsigned long pgd_page_vaddr(pgd_t pgd) +{ + return (unsigned long)__va(pgd_val(pgd) & ~PGD_MASKED_BITS); +} + /* Generic accessors to PTE bits */ static inline int pte_write(pte_t pte) { return !!(pte_val(pte) & _PAGE_RW);} @@ -402,7 +416,7 @@ static inline int pte_protnone(pte_t pte) static inline int pte_present(pte_t pte) { - return pte_val(pte) & _PAGE_PRESENT; + return !!(pte_val(pte) & _PAGE_PRESENT); } /* Conversion functions: convert a page and protection to a page entry, @@ -413,13 +427,13 @@ static inline int pte_present(pte_t pte) */ static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot) { - return __pte(((pte_basic_t)(pfn) << PTE_RPN_SHIFT) | + return __pte((((pte_basic_t)(pfn) << PTE_RPN_SHIFT) & PTE_RPN_MASK) | pgprot_val(pgprot)); } static inline unsigned long pte_pfn(pte_t pte) { - return pte_val(pte) >> PTE_RPN_SHIFT; + return (pte_val(pte) & PTE_RPN_MASK) >> PTE_RPN_SHIFT; } /* Generic modifiers for PTE bits */ diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/book3s/64/mmu-hash.h index 7352d3f212df..0cea4807e26f 100644 --- a/arch/powerpc/include/asm/mmu-hash64.h +++ b/arch/powerpc/include/asm/book3s/64/mmu-hash.h @@ -114,6 +114,7 @@ #define POWER7_TLB_SETS 128 /* # sets in POWER7 TLB */ #define POWER8_TLB_SETS 512 /* # sets in POWER8 TLB */ +#define POWER9_TLB_SETS_HASH 256 /* # sets in POWER9 TLB Hash mode */ #ifndef __ASSEMBLY__ @@ -607,6 +608,9 @@ static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize) context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1; return get_vsid(context, ea, ssize); } + +unsigned htab_shift_for_mem_size(unsigned long mem_size); + #endif /* __ASSEMBLY__ */ #endif /* _ASM_POWERPC_MMU_HASH64_H_ */ diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h index ac07a30a7934..77d3ce05798e 100644 --- a/arch/powerpc/include/asm/book3s/64/pgtable.h +++ b/arch/powerpc/include/asm/book3s/64/pgtable.h @@ -43,13 +43,8 @@ */ #ifndef __real_pte -#ifdef CONFIG_STRICT_MM_TYPECHECKS #define __real_pte(e,p) ((real_pte_t){(e)}) #define __rpte_to_pte(r) ((r).pte) -#else -#define __real_pte(e,p) (e) -#define __rpte_to_pte(r) (__pte(r)) -#endif #define __rpte_to_hidx(r,index) (pte_val(__rpte_to_pte(r)) >>_PAGE_F_GIX_SHIFT) #define pte_iterate_hashed_subpages(rpte, psize, va, index, shift) \ @@ -111,6 +106,26 @@ static inline void pgd_set(pgd_t *pgdp, unsigned long val) *pgdp = __pgd(val); } +static inline void pgd_clear(pgd_t *pgdp) +{ + *pgdp = __pgd(0); +} + +#define pgd_none(pgd) (!pgd_val(pgd)) +#define pgd_present(pgd) (!pgd_none(pgd)) + +static inline pte_t pgd_pte(pgd_t pgd) +{ + return __pte(pgd_val(pgd)); +} + +static inline pgd_t pte_pgd(pte_t pte) +{ + return __pgd(pte_val(pte)); +} + +extern struct page *pgd_page(pgd_t pgd); + /* * Find an entry in a page-table-directory. We combine the address region * (the high order N bits) and the pgd portion of the address. @@ -118,9 +133,10 @@ static inline void pgd_set(pgd_t *pgdp, unsigned long val) #define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) +#define pud_offset(pgdp, addr) \ + (((pud_t *) pgd_page_vaddr(*(pgdp))) + pud_index(addr)) #define pmd_offset(pudp,addr) \ (((pmd_t *) pud_page_vaddr(*(pudp))) + pmd_index(addr)) - #define pte_offset_kernel(dir,addr) \ (((pte_t *) pmd_page_vaddr(*(dir))) + pte_index(addr)) @@ -135,6 +151,8 @@ static inline void pgd_set(pgd_t *pgdp, unsigned long val) pr_err("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) #define pmd_ERROR(e) \ pr_err("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) +#define pud_ERROR(e) \ + pr_err("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e)) #define pgd_ERROR(e) \ pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) @@ -154,10 +172,10 @@ static inline void pgd_set(pgd_t *pgdp, unsigned long val) #define SWP_TYPE_BITS 5 #define __swp_type(x) (((x).val >> _PAGE_BIT_SWAP_TYPE) \ & ((1UL << SWP_TYPE_BITS) - 1)) -#define __swp_offset(x) ((x).val >> PTE_RPN_SHIFT) +#define __swp_offset(x) (((x).val & PTE_RPN_MASK) >> PTE_RPN_SHIFT) #define __swp_entry(type, offset) ((swp_entry_t) { \ - ((type) << _PAGE_BIT_SWAP_TYPE) \ - | ((offset) << PTE_RPN_SHIFT) }) + ((type) << _PAGE_BIT_SWAP_TYPE) \ + | (((offset) << PTE_RPN_SHIFT) & PTE_RPN_MASK)}) /* * swp_entry_t must be independent of pte bits. We build a swp_entry_t from * swap type and offset we get from swap and convert that to pte to find a diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h b/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h new file mode 100644 index 000000000000..1b753f96b374 --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h @@ -0,0 +1,94 @@ +#ifndef _ASM_POWERPC_BOOK3S_64_TLBFLUSH_HASH_H +#define _ASM_POWERPC_BOOK3S_64_TLBFLUSH_HASH_H + +#define MMU_NO_CONTEXT 0 + +/* + * TLB flushing for 64-bit hash-MMU CPUs + */ + +#include <linux/percpu.h> +#include <asm/page.h> + +#define PPC64_TLB_BATCH_NR 192 + +struct ppc64_tlb_batch { + int active; + unsigned long index; + struct mm_struct *mm; + real_pte_t pte[PPC64_TLB_BATCH_NR]; + unsigned long vpn[PPC64_TLB_BATCH_NR]; + unsigned int psize; + int ssize; +}; +DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch); + +extern void __flush_tlb_pending(struct ppc64_tlb_batch *batch); + +#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE + +static inline void arch_enter_lazy_mmu_mode(void) +{ + struct ppc64_tlb_batch *batch = this_cpu_ptr(&ppc64_tlb_batch); + + batch->active = 1; +} + +static inline void arch_leave_lazy_mmu_mode(void) +{ + struct ppc64_tlb_batch *batch = this_cpu_ptr(&ppc64_tlb_batch); + + if (batch->index) + __flush_tlb_pending(batch); + batch->active = 0; +} + +#define arch_flush_lazy_mmu_mode() do {} while (0) + + +extern void flush_hash_page(unsigned long vpn, real_pte_t pte, int psize, + int ssize, unsigned long flags); +extern void flush_hash_range(unsigned long number, int local); +extern void flush_hash_hugepage(unsigned long vsid, unsigned long addr, + pmd_t *pmdp, unsigned int psize, int ssize, + unsigned long flags); + +static inline void local_flush_tlb_mm(struct mm_struct *mm) +{ +} + +static inline void flush_tlb_mm(struct mm_struct *mm) +{ +} + +static inline void local_flush_tlb_page(struct vm_area_struct *vma, + unsigned long vmaddr) +{ +} + +static inline void flush_tlb_page(struct vm_area_struct *vma, + unsigned long vmaddr) +{ +} + +static inline void flush_tlb_page_nohash(struct vm_area_struct *vma, + unsigned long vmaddr) +{ +} + +static inline void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ +} + +static inline void flush_tlb_kernel_range(unsigned long start, + unsigned long end) +{ +} + +/* Private function for use by PCI IO mapping code */ +extern void __flush_hash_table_range(struct mm_struct *mm, unsigned long start, + unsigned long end); +extern void flush_tlb_pmd_range(struct mm_struct *mm, pmd_t *pmd, + unsigned long addr); +#endif /* _ASM_POWERPC_BOOK3S_64_TLBFLUSH_HASH_H */ diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h index 5f8229e24fe6..ffbafbf76b19 100644 --- a/arch/powerpc/include/asm/cache.h +++ b/arch/powerpc/include/asm/cache.h @@ -69,6 +69,25 @@ extern void _set_L3CR(unsigned long); #define _set_L3CR(val) do { } while(0) #endif +static inline void dcbz(void *addr) +{ + __asm__ __volatile__ ("dcbz 0, %0" : : "r"(addr) : "memory"); +} + +static inline void dcbi(void *addr) +{ + __asm__ __volatile__ ("dcbi 0, %0" : : "r"(addr) : "memory"); +} + +static inline void dcbf(void *addr) +{ + __asm__ __volatile__ ("dcbf 0, %0" : : "r"(addr) : "memory"); +} + +static inline void dcbst(void *addr) +{ + __asm__ __volatile__ ("dcbst 0, %0" : : "r"(addr) : "memory"); +} #endif /* !__ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_CACHE_H */ diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h index 6229e6b6037b..69fb16d7a811 100644 --- a/arch/powerpc/include/asm/cacheflush.h +++ b/arch/powerpc/include/asm/cacheflush.h @@ -30,8 +30,6 @@ extern void flush_dcache_page(struct page *page); #define flush_dcache_mmap_lock(mapping) do { } while (0) #define flush_dcache_mmap_unlock(mapping) do { } while (0) -extern void __flush_disable_L1(void); - extern void flush_icache_range(unsigned long, unsigned long); extern void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, unsigned long addr, @@ -47,12 +45,58 @@ static inline void __flush_dcache_icache_phys(unsigned long physaddr) } #endif -extern void flush_dcache_range(unsigned long start, unsigned long stop); #ifdef CONFIG_PPC32 -extern void clean_dcache_range(unsigned long start, unsigned long stop); -extern void invalidate_dcache_range(unsigned long start, unsigned long stop); +/* + * Write any modified data cache blocks out to memory and invalidate them. + * Does not invalidate the corresponding instruction cache blocks. + */ +static inline void flush_dcache_range(unsigned long start, unsigned long stop) +{ + void *addr = (void *)(start & ~(L1_CACHE_BYTES - 1)); + unsigned long size = stop - (unsigned long)addr + (L1_CACHE_BYTES - 1); + unsigned long i; + + for (i = 0; i < size >> L1_CACHE_SHIFT; i++, addr += L1_CACHE_BYTES) + dcbf(addr); + mb(); /* sync */ +} + +/* + * Write any modified data cache blocks out to memory. + * Does not invalidate the corresponding cache lines (especially for + * any corresponding instruction cache). + */ +static inline void clean_dcache_range(unsigned long start, unsigned long stop) +{ + void *addr = (void *)(start & ~(L1_CACHE_BYTES - 1)); + unsigned long size = stop - (unsigned long)addr + (L1_CACHE_BYTES - 1); + unsigned long i; + + for (i = 0; i < size >> L1_CACHE_SHIFT; i++, addr += L1_CACHE_BYTES) + dcbst(addr); + mb(); /* sync */ +} + +/* + * Like above, but invalidate the D-cache. This is used by the 8xx + * to invalidate the cache so the PPC core doesn't get stale data + * from the CPM (no cache snooping here :-). + */ +static inline void invalidate_dcache_range(unsigned long start, + unsigned long stop) +{ + void *addr = (void *)(start & ~(L1_CACHE_BYTES - 1)); + unsigned long size = stop - (unsigned long)addr + (L1_CACHE_BYTES - 1); + unsigned long i; + + for (i = 0; i < size >> L1_CACHE_SHIFT; i++, addr += L1_CACHE_BYTES) + dcbi(addr); + mb(); /* sync */ +} + #endif /* CONFIG_PPC32 */ #ifdef CONFIG_PPC64 +extern void flush_dcache_range(unsigned long start, unsigned long stop); extern void flush_inval_dcache_range(unsigned long start, unsigned long stop); extern void flush_dcache_phys_range(unsigned long start, unsigned long stop); #endif diff --git a/arch/powerpc/include/asm/checksum.h b/arch/powerpc/include/asm/checksum.h index e8d9ef4755a4..ee655ed1ff1b 100644 --- a/arch/powerpc/include/asm/checksum.h +++ b/arch/powerpc/include/asm/checksum.h @@ -9,30 +9,9 @@ * 2 of the License, or (at your option) any later version. */ -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. ihl is the number - * of 32-bit words and is always >= 5. - */ #ifdef CONFIG_GENERIC_CSUM #include <asm-generic/checksum.h> #else -extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl); - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -extern __wsum csum_partial(const void *buff, int len, __wsum sum); - /* * Computes the checksum of a memory block at src, length len, * and adds in "sum" (32-bit), while copying the block to dst. @@ -47,21 +26,12 @@ extern __wsum csum_partial_copy_generic(const void *src, void *dst, int len, __wsum sum, int *src_err, int *dst_err); -#ifdef __powerpc64__ #define _HAVE_ARCH_COPY_AND_CSUM_FROM_USER extern __wsum csum_and_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *err_ptr); #define HAVE_CSUM_COPY_USER extern __wsum csum_and_copy_to_user(const void *src, void __user *dst, int len, __wsum sum, int *err_ptr); -#else -/* - * the same as csum_partial, but copies from src to dst while it - * checksums. - */ -#define csum_partial_copy_from_user(src, dst, len, sum, errp) \ - csum_partial_copy_generic((__force const void *)(src), (dst), (len), (sum), (errp), NULL) -#endif #define csum_partial_copy_nocheck(src, dst, len, sum) \ csum_partial_copy_generic((src), (dst), (len), (sum), NULL, NULL) @@ -83,15 +53,6 @@ static inline __sum16 csum_fold(__wsum sum) return (__force __sum16)(~((__force u32)sum + tmp) >> 16); } -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -static inline __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold(csum_partial(buff, len, 0)); -} - static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, unsigned short proto, @@ -135,17 +96,117 @@ static inline __wsum csum_add(__wsum csum, __wsum addend) { #ifdef __powerpc64__ u64 res = (__force u64)csum; +#endif + if (__builtin_constant_p(csum) && csum == 0) + return addend; + if (__builtin_constant_p(addend) && addend == 0) + return csum; +#ifdef __powerpc64__ res += (__force u64)addend; return (__force __wsum)((u32)res + (res >> 32)); #else asm("addc %0,%0,%1;" "addze %0,%0;" - : "+r" (csum) : "r" (addend)); + : "+r" (csum) : "r" (addend) : "xer"); return csum; #endif } +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. ihl is the number + * of 32-bit words and is always >= 5. + */ +static inline __wsum ip_fast_csum_nofold(const void *iph, unsigned int ihl) +{ + const u32 *ptr = (const u32 *)iph + 1; +#ifdef __powerpc64__ + unsigned int i; + u64 s = *(const u32 *)iph; + + for (i = 0; i < ihl - 1; i++, ptr++) + s += *ptr; + s += (s >> 32); + return (__force __wsum)s; +#else + __wsum sum, tmp; + + asm("mtctr %3;" + "addc %0,%4,%5;" + "1: lwzu %1, 4(%2);" + "adde %0,%0,%1;" + "bdnz 1b;" + "addze %0,%0;" + : "=r" (sum), "=r" (tmp), "+b" (ptr) + : "r" (ihl - 2), "r" (*(const u32 *)iph), "r" (*ptr) + : "ctr", "xer", "memory"); + + return sum; +#endif +} + +static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + return csum_fold(ip_fast_csum_nofold(iph, ihl)); +} + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum __csum_partial(const void *buff, int len, __wsum sum); + +static inline __wsum csum_partial(const void *buff, int len, __wsum sum) +{ + if (__builtin_constant_p(len) && len <= 16 && (len & 1) == 0) { + if (len == 2) + sum = csum_add(sum, (__force __wsum)*(const u16 *)buff); + if (len >= 4) + sum = csum_add(sum, (__force __wsum)*(const u32 *)buff); + if (len == 6) + sum = csum_add(sum, (__force __wsum) + *(const u16 *)(buff + 4)); + if (len >= 8) + sum = csum_add(sum, (__force __wsum) + *(const u32 *)(buff + 4)); + if (len == 10) + sum = csum_add(sum, (__force __wsum) + *(const u16 *)(buff + 8)); + if (len >= 12) + sum = csum_add(sum, (__force __wsum) + *(const u32 *)(buff + 8)); + if (len == 14) + sum = csum_add(sum, (__force __wsum) + *(const u16 *)(buff + 12)); + if (len >= 16) + sum = csum_add(sum, (__force __wsum) + *(const u32 *)(buff + 12)); + } else if (__builtin_constant_p(len) && (len & 3) == 0) { + sum = csum_add(sum, ip_fast_csum_nofold(buff, len >> 2)); + } else { + sum = __csum_partial(buff, len, sum); + } + return sum; +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + #endif #endif /* __KERNEL__ */ #endif diff --git a/arch/powerpc/include/asm/cmpxchg.h b/arch/powerpc/include/asm/cmpxchg.h index d1a8d93cccfd..44efe739b6b9 100644 --- a/arch/powerpc/include/asm/cmpxchg.h +++ b/arch/powerpc/include/asm/cmpxchg.h @@ -5,25 +5,25 @@ #include <linux/compiler.h> #include <asm/synch.h> #include <asm/asm-compat.h> +#include <linux/bug.h> /* * Atomic exchange * - * Changes the memory location '*ptr' to be val and returns + * Changes the memory location '*p' to be val and returns * the previous value stored there. */ + static __always_inline unsigned long -__xchg_u32(volatile void *p, unsigned long val) +__xchg_u32_local(volatile void *p, unsigned long val) { unsigned long prev; __asm__ __volatile__( - PPC_ATOMIC_ENTRY_BARRIER "1: lwarx %0,0,%2 \n" PPC405_ERR77(0,%2) " stwcx. %3,0,%2 \n\ bne- 1b" - PPC_ATOMIC_EXIT_BARRIER : "=&r" (prev), "+m" (*(volatile unsigned int *)p) : "r" (p), "r" (val) : "cc", "memory"); @@ -31,42 +31,34 @@ __xchg_u32(volatile void *p, unsigned long val) return prev; } -/* - * Atomic exchange - * - * Changes the memory location '*ptr' to be val and returns - * the previous value stored there. - */ static __always_inline unsigned long -__xchg_u32_local(volatile void *p, unsigned long val) +__xchg_u32_relaxed(u32 *p, unsigned long val) { unsigned long prev; __asm__ __volatile__( -"1: lwarx %0,0,%2 \n" - PPC405_ERR77(0,%2) -" stwcx. %3,0,%2 \n\ - bne- 1b" - : "=&r" (prev), "+m" (*(volatile unsigned int *)p) +"1: lwarx %0,0,%2\n" + PPC405_ERR77(0, %2) +" stwcx. %3,0,%2\n" +" bne- 1b" + : "=&r" (prev), "+m" (*p) : "r" (p), "r" (val) - : "cc", "memory"); + : "cc"); return prev; } #ifdef CONFIG_PPC64 static __always_inline unsigned long -__xchg_u64(volatile void *p, unsigned long val) +__xchg_u64_local(volatile void *p, unsigned long val) { unsigned long prev; __asm__ __volatile__( - PPC_ATOMIC_ENTRY_BARRIER "1: ldarx %0,0,%2 \n" PPC405_ERR77(0,%2) " stdcx. %3,0,%2 \n\ bne- 1b" - PPC_ATOMIC_EXIT_BARRIER : "=&r" (prev), "+m" (*(volatile unsigned long *)p) : "r" (p), "r" (val) : "cc", "memory"); @@ -75,64 +67,52 @@ __xchg_u64(volatile void *p, unsigned long val) } static __always_inline unsigned long -__xchg_u64_local(volatile void *p, unsigned long val) +__xchg_u64_relaxed(u64 *p, unsigned long val) { unsigned long prev; __asm__ __volatile__( -"1: ldarx %0,0,%2 \n" - PPC405_ERR77(0,%2) -" stdcx. %3,0,%2 \n\ - bne- 1b" - : "=&r" (prev), "+m" (*(volatile unsigned long *)p) +"1: ldarx %0,0,%2\n" + PPC405_ERR77(0, %2) +" stdcx. %3,0,%2\n" +" bne- 1b" + : "=&r" (prev), "+m" (*p) : "r" (p), "r" (val) - : "cc", "memory"); + : "cc"); return prev; } #endif -/* - * This function doesn't exist, so you'll get a linker error - * if something tries to do an invalid xchg(). - */ -extern void __xchg_called_with_bad_pointer(void); - static __always_inline unsigned long -__xchg(volatile void *ptr, unsigned long x, unsigned int size) +__xchg_local(volatile void *ptr, unsigned long x, unsigned int size) { switch (size) { case 4: - return __xchg_u32(ptr, x); + return __xchg_u32_local(ptr, x); #ifdef CONFIG_PPC64 case 8: - return __xchg_u64(ptr, x); + return __xchg_u64_local(ptr, x); #endif } - __xchg_called_with_bad_pointer(); + BUILD_BUG_ON_MSG(1, "Unsupported size for __xchg"); return x; } static __always_inline unsigned long -__xchg_local(volatile void *ptr, unsigned long x, unsigned int size) +__xchg_relaxed(void *ptr, unsigned long x, unsigned int size) { switch (size) { case 4: - return __xchg_u32_local(ptr, x); + return __xchg_u32_relaxed(ptr, x); #ifdef CONFIG_PPC64 case 8: - return __xchg_u64_local(ptr, x); + return __xchg_u64_relaxed(ptr, x); #endif } - __xchg_called_with_bad_pointer(); + BUILD_BUG_ON_MSG(1, "Unsupported size for __xchg_local"); return x; } -#define xchg(ptr,x) \ - ({ \ - __typeof__(*(ptr)) _x_ = (x); \ - (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \ - }) - #define xchg_local(ptr,x) \ ({ \ __typeof__(*(ptr)) _x_ = (x); \ @@ -140,6 +120,12 @@ __xchg_local(volatile void *ptr, unsigned long x, unsigned int size) (unsigned long)_x_, sizeof(*(ptr))); \ }) +#define xchg_relaxed(ptr, x) \ +({ \ + __typeof__(*(ptr)) _x_ = (x); \ + (__typeof__(*(ptr))) __xchg_relaxed((ptr), \ + (unsigned long)_x_, sizeof(*(ptr))); \ +}) /* * Compare and exchange - if *p == old, set it to new, * and return the old value of *p. @@ -190,6 +176,56 @@ __cmpxchg_u32_local(volatile unsigned int *p, unsigned long old, return prev; } +static __always_inline unsigned long +__cmpxchg_u32_relaxed(u32 *p, unsigned long old, unsigned long new) +{ + unsigned long prev; + + __asm__ __volatile__ ( +"1: lwarx %0,0,%2 # __cmpxchg_u32_relaxed\n" +" cmpw 0,%0,%3\n" +" bne- 2f\n" + PPC405_ERR77(0, %2) +" stwcx. %4,0,%2\n" +" bne- 1b\n" +"2:" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (old), "r" (new) + : "cc"); + + return prev; +} + +/* + * cmpxchg family don't have order guarantee if cmp part fails, therefore we + * can avoid superfluous barriers if we use assembly code to implement + * cmpxchg() and cmpxchg_acquire(), however we don't do the similar for + * cmpxchg_release() because that will result in putting a barrier in the + * middle of a ll/sc loop, which is probably a bad idea. For example, this + * might cause the conditional store more likely to fail. + */ +static __always_inline unsigned long +__cmpxchg_u32_acquire(u32 *p, unsigned long old, unsigned long new) +{ + unsigned long prev; + + __asm__ __volatile__ ( +"1: lwarx %0,0,%2 # __cmpxchg_u32_acquire\n" +" cmpw 0,%0,%3\n" +" bne- 2f\n" + PPC405_ERR77(0, %2) +" stwcx. %4,0,%2\n" +" bne- 1b\n" + PPC_ACQUIRE_BARRIER + "\n" +"2:" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (old), "r" (new) + : "cc", "memory"); + + return prev; +} + #ifdef CONFIG_PPC64 static __always_inline unsigned long __cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new) @@ -233,11 +269,47 @@ __cmpxchg_u64_local(volatile unsigned long *p, unsigned long old, return prev; } -#endif -/* This function doesn't exist, so you'll get a linker error - if something tries to do an invalid cmpxchg(). */ -extern void __cmpxchg_called_with_bad_pointer(void); +static __always_inline unsigned long +__cmpxchg_u64_relaxed(u64 *p, unsigned long old, unsigned long new) +{ + unsigned long prev; + + __asm__ __volatile__ ( +"1: ldarx %0,0,%2 # __cmpxchg_u64_relaxed\n" +" cmpd 0,%0,%3\n" +" bne- 2f\n" +" stdcx. %4,0,%2\n" +" bne- 1b\n" +"2:" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (old), "r" (new) + : "cc"); + + return prev; +} + +static __always_inline unsigned long +__cmpxchg_u64_acquire(u64 *p, unsigned long old, unsigned long new) +{ + unsigned long prev; + + __asm__ __volatile__ ( +"1: ldarx %0,0,%2 # __cmpxchg_u64_acquire\n" +" cmpd 0,%0,%3\n" +" bne- 2f\n" +" stdcx. %4,0,%2\n" +" bne- 1b\n" + PPC_ACQUIRE_BARRIER + "\n" +"2:" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (old), "r" (new) + : "cc", "memory"); + + return prev; +} +#endif static __always_inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, @@ -251,7 +323,7 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, return __cmpxchg_u64(ptr, old, new); #endif } - __cmpxchg_called_with_bad_pointer(); + BUILD_BUG_ON_MSG(1, "Unsupported size for __cmpxchg"); return old; } @@ -267,10 +339,41 @@ __cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new, return __cmpxchg_u64_local(ptr, old, new); #endif } - __cmpxchg_called_with_bad_pointer(); + BUILD_BUG_ON_MSG(1, "Unsupported size for __cmpxchg_local"); + return old; +} + +static __always_inline unsigned long +__cmpxchg_relaxed(void *ptr, unsigned long old, unsigned long new, + unsigned int size) +{ + switch (size) { + case 4: + return __cmpxchg_u32_relaxed(ptr, old, new); +#ifdef CONFIG_PPC64 + case 8: + return __cmpxchg_u64_relaxed(ptr, old, new); +#endif + } + BUILD_BUG_ON_MSG(1, "Unsupported size for __cmpxchg_relaxed"); return old; } +static __always_inline unsigned long +__cmpxchg_acquire(void *ptr, unsigned long old, unsigned long new, + unsigned int size) +{ + switch (size) { + case 4: + return __cmpxchg_u32_acquire(ptr, old, new); +#ifdef CONFIG_PPC64 + case 8: + return __cmpxchg_u64_acquire(ptr, old, new); +#endif + } + BUILD_BUG_ON_MSG(1, "Unsupported size for __cmpxchg_acquire"); + return old; +} #define cmpxchg(ptr, o, n) \ ({ \ __typeof__(*(ptr)) _o_ = (o); \ @@ -288,6 +391,23 @@ __cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new, (unsigned long)_n_, sizeof(*(ptr))); \ }) +#define cmpxchg_relaxed(ptr, o, n) \ +({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg_relaxed((ptr), \ + (unsigned long)_o_, (unsigned long)_n_, \ + sizeof(*(ptr))); \ +}) + +#define cmpxchg_acquire(ptr, o, n) \ +({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg_acquire((ptr), \ + (unsigned long)_o_, (unsigned long)_n_, \ + sizeof(*(ptr))); \ +}) #ifdef CONFIG_PPC64 #define cmpxchg64(ptr, o, n) \ ({ \ @@ -299,7 +419,16 @@ __cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new, BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ cmpxchg_local((ptr), (o), (n)); \ }) -#define cmpxchg64_relaxed cmpxchg64_local +#define cmpxchg64_relaxed(ptr, o, n) \ +({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg_relaxed((ptr), (o), (n)); \ +}) +#define cmpxchg64_acquire(ptr, o, n) \ +({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg_acquire((ptr), (o), (n)); \ +}) #else #include <asm-generic/cmpxchg-local.h> #define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h index 840a5509b3f1..994c60a857ce 100644 --- a/arch/powerpc/include/asm/code-patching.h +++ b/arch/powerpc/include/asm/code-patching.h @@ -99,4 +99,25 @@ static inline unsigned long ppc_global_function_entry(void *func) #endif } +#ifdef CONFIG_PPC64 +/* + * Some instruction encodings commonly used in dynamic ftracing + * and function live patching. + */ + +/* This must match the definition of STK_GOT in <asm/ppc_asm.h> */ +#if defined(_CALL_ELF) && _CALL_ELF == 2 +#define R2_STACK_OFFSET 24 +#else +#define R2_STACK_OFFSET 40 +#endif + +#define PPC_INST_LD_TOC (PPC_INST_LD | ___PPC_RT(__REG_R2) | \ + ___PPC_RA(__REG_R1) | R2_STACK_OFFSET) + +/* usually preceded by a mflr r0 */ +#define PPC_INST_STD_LR (PPC_INST_STD | ___PPC_RS(__REG_R0) | \ + ___PPC_RA(__REG_R1) | PPC_LR_STKOFF) +#endif /* CONFIG_PPC64 */ + #endif /* _ASM_POWERPC_CODE_PATCHING_H */ diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index b118072670fb..df4fb5faba43 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -43,6 +43,11 @@ extern int machine_check_e500(struct pt_regs *regs); extern int machine_check_e200(struct pt_regs *regs); extern int machine_check_47x(struct pt_regs *regs); +extern void cpu_down_flush_e500v2(void); +extern void cpu_down_flush_e500mc(void); +extern void cpu_down_flush_e5500(void); +extern void cpu_down_flush_e6500(void); + /* NOTE WELL: Update identify_cpu() if fields are added or removed! */ struct cpu_spec { /* CPU is matched via (PVR & pvr_mask) == pvr_value */ @@ -59,6 +64,9 @@ struct cpu_spec { unsigned int icache_bsize; unsigned int dcache_bsize; + /* flush caches inside the current cpu */ + void (*cpu_down_flush)(void); + /* number of performance monitor counters */ unsigned int num_pmcs; enum powerpc_pmc_type pmc_type; @@ -171,7 +179,7 @@ enum { #define CPU_FTR_ARCH_201 LONG_ASM_CONST(0x0000000200000000) #define CPU_FTR_ARCH_206 LONG_ASM_CONST(0x0000000400000000) #define CPU_FTR_ARCH_207S LONG_ASM_CONST(0x0000000800000000) -/* Free LONG_ASM_CONST(0x0000001000000000) */ +#define CPU_FTR_ARCH_300 LONG_ASM_CONST(0x0000001000000000) #define CPU_FTR_MMCRA LONG_ASM_CONST(0x0000002000000000) #define CPU_FTR_CTRL LONG_ASM_CONST(0x0000004000000000) #define CPU_FTR_SMT LONG_ASM_CONST(0x0000008000000000) @@ -196,6 +204,7 @@ enum { #define CPU_FTR_DAWR LONG_ASM_CONST(0x0400000000000000) #define CPU_FTR_DABRX LONG_ASM_CONST(0x0800000000000000) #define CPU_FTR_PMAO_BUG LONG_ASM_CONST(0x1000000000000000) +#define CPU_FTR_SUBCORE LONG_ASM_CONST(0x2000000000000000) #ifndef __ASSEMBLY__ @@ -443,9 +452,19 @@ enum { CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \ CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_DAWR | \ - CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP) + CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP | CPU_FTR_SUBCORE) #define CPU_FTRS_POWER8E (CPU_FTRS_POWER8 | CPU_FTR_PMAO_BUG) #define CPU_FTRS_POWER8_DD1 (CPU_FTRS_POWER8 & ~CPU_FTR_DBELL) +#define CPU_FTRS_POWER9 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\ + CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_COHERENT_ICACHE | \ + CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ + CPU_FTR_DSCR | CPU_FTR_SAO | \ + CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ + CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \ + CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_DAWR | \ + CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP | CPU_FTR_ARCH_300) #define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ @@ -464,7 +483,7 @@ enum { (CPU_FTRS_POWER4 | CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | \ CPU_FTRS_POWER6 | CPU_FTRS_POWER7 | CPU_FTRS_POWER8E | \ CPU_FTRS_POWER8 | CPU_FTRS_POWER8_DD1 | CPU_FTRS_CELL | \ - CPU_FTRS_PA6T | CPU_FTR_VSX) + CPU_FTRS_PA6T | CPU_FTR_VSX | CPU_FTRS_POWER9) #endif #else enum { @@ -515,7 +534,8 @@ enum { (CPU_FTRS_POWER4 & CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & \ CPU_FTRS_POWER6 & CPU_FTRS_POWER7 & CPU_FTRS_CELL & \ CPU_FTRS_PA6T & CPU_FTRS_POWER8 & CPU_FTRS_POWER8E & \ - CPU_FTRS_POWER8_DD1 & ~CPU_FTR_HVMODE & CPU_FTRS_POSSIBLE) + CPU_FTRS_POWER8_DD1 & ~CPU_FTR_HVMODE & CPU_FTRS_POSSIBLE & \ + CPU_FTRS_POWER9) #endif #else enum { diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h index ba42e46ea58e..666bef4ebfae 100644 --- a/arch/powerpc/include/asm/cputhreads.h +++ b/arch/powerpc/include/asm/cputhreads.h @@ -1,6 +1,7 @@ #ifndef _ASM_POWERPC_CPUTHREADS_H #define _ASM_POWERPC_CPUTHREADS_H +#ifndef __ASSEMBLY__ #include <linux/cpumask.h> /* @@ -94,7 +95,21 @@ static inline int cpu_last_thread_sibling(int cpu) return cpu | (threads_per_core - 1); } +static inline u32 get_tensr(void) +{ +#ifdef CONFIG_BOOKE + if (cpu_has_feature(CPU_FTR_SMT)) + return mfspr(SPRN_TENSR); +#endif + return 1; +} + +void book3e_start_thread(int thread, unsigned long addr); +void book3e_stop_thread(int thread); + +#endif /* __ASSEMBLY__ */ +#define INVALID_THREAD_HWID 0x0fff #endif /* _ASM_POWERPC_CPUTHREADS_H */ diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h index 867c39b45df6..fb9f376ae27b 100644 --- a/arch/powerpc/include/asm/eeh.h +++ b/arch/powerpc/include/asm/eeh.h @@ -72,6 +72,7 @@ struct pci_dn; #define EEH_PE_PHB (1 << 1) /* PHB PE */ #define EEH_PE_DEVICE (1 << 2) /* Device PE */ #define EEH_PE_BUS (1 << 3) /* Bus PE */ +#define EEH_PE_VF (1 << 4) /* VF PE */ #define EEH_PE_ISOLATED (1 << 0) /* Isolated PE */ #define EEH_PE_RECOVERING (1 << 1) /* Recovering PE */ @@ -136,11 +137,15 @@ struct eeh_dev { int pcix_cap; /* Saved PCIx capability */ int pcie_cap; /* Saved PCIe capability */ int aer_cap; /* Saved AER capability */ + int af_cap; /* Saved AF capability */ struct eeh_pe *pe; /* Associated PE */ struct list_head list; /* Form link list in the PE */ + struct list_head rmv_list; /* Record the removed edevs */ struct pci_controller *phb; /* Associated PHB */ struct pci_dn *pdn; /* Associated PCI device node */ struct pci_dev *pdev; /* Associated PCI device */ + bool in_error; /* Error flag for edev */ + struct pci_dev *physfn; /* Associated SRIOV PF */ struct pci_bus *bus; /* PCI bus for partial hotplug */ }; diff --git a/arch/powerpc/include/asm/fsl_pm.h b/arch/powerpc/include/asm/fsl_pm.h new file mode 100644 index 000000000000..47df55e36d4f --- /dev/null +++ b/arch/powerpc/include/asm/fsl_pm.h @@ -0,0 +1,51 @@ +/* + * Support Power Management + * + * Copyright 2014-2015 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __PPC_FSL_PM_H +#define __PPC_FSL_PM_H + +#define E500_PM_PH10 1 +#define E500_PM_PH15 2 +#define E500_PM_PH20 3 +#define E500_PM_PH30 4 +#define E500_PM_DOZE E500_PM_PH10 +#define E500_PM_NAP E500_PM_PH15 + +#define PLAT_PM_SLEEP 20 +#define PLAT_PM_LPM20 30 + +#define FSL_PM_SLEEP (1 << 0) +#define FSL_PM_DEEP_SLEEP (1 << 1) + +struct fsl_pm_ops { + /* mask pending interrupts to the RCPM from MPIC */ + void (*irq_mask)(int cpu); + + /* unmask pending interrupts to the RCPM from MPIC */ + void (*irq_unmask)(int cpu); + void (*cpu_enter_state)(int cpu, int state); + void (*cpu_exit_state)(int cpu, int state); + void (*cpu_up_prepare)(int cpu); + void (*cpu_die)(int cpu); + int (*plat_enter_sleep)(void); + void (*freeze_time_base)(bool freeze); + + /* keep the power of IP blocks during sleep/deep sleep */ + void (*set_ip_power)(bool enable, u32 mask); + + /* get platform supported power management modes */ + unsigned int (*get_pm_modes)(void); +}; + +extern const struct fsl_pm_ops *qoriq_pm_ops; + +int __init fsl_rcpm_init(void); + +#endif /* __PPC_FSL_PM_H */ diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h index ef89b1465573..50ca7585abe2 100644 --- a/arch/powerpc/include/asm/ftrace.h +++ b/arch/powerpc/include/asm/ftrace.h @@ -46,6 +46,8 @@ extern void _mcount(void); #ifdef CONFIG_DYNAMIC_FTRACE +# define FTRACE_ADDR ((unsigned long)ftrace_caller) +# define FTRACE_REGS_ADDR FTRACE_ADDR static inline unsigned long ftrace_call_adjust(unsigned long addr) { /* reloction of mcount call site is the same as the address */ @@ -58,6 +60,9 @@ struct dyn_arch_ftrace { #endif /* CONFIG_DYNAMIC_FTRACE */ #endif /* __ASSEMBLY__ */ +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS +#define ARCH_SUPPORTS_FTRACE_OPS 1 +#endif #endif #if defined(CONFIG_FTRACE_SYSCALLS) && defined(CONFIG_PPC64) && !defined(__ASSEMBLY__) diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h index 7eac89b9f02e..42814f0567cc 100644 --- a/arch/powerpc/include/asm/hugetlb.h +++ b/arch/powerpc/include/asm/hugetlb.h @@ -19,7 +19,7 @@ static inline pte_t *hugepd_page(hugepd_t hpd) * We have only four bits to encode, MMU page size */ BUILD_BUG_ON((MMU_PAGE_COUNT - 1) > 0xf); - return (pte_t *)(hpd.pd & ~HUGEPD_SHIFT_MASK); + return __va(hpd.pd & HUGEPD_ADDR_MASK); } static inline unsigned int hugepd_mmu_psize(hugepd_t hpd) diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h index e3b54dd4f730..0bc9c284aa10 100644 --- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -94,6 +94,7 @@ #define H_SG_LIST -72 #define H_OP_MODE -73 #define H_COP_HW -74 +#define H_STATE -75 #define H_UNSUPPORTED_FLAG_START -256 #define H_UNSUPPORTED_FLAG_END -511 #define H_MULTI_THREADS_ACTIVE -9005 diff --git a/arch/powerpc/include/asm/hydra.h b/arch/powerpc/include/asm/hydra.h index 1cb39c96d155..b3b0f2d020f0 100644 --- a/arch/powerpc/include/asm/hydra.h +++ b/arch/powerpc/include/asm/hydra.h @@ -89,7 +89,7 @@ extern volatile struct Hydra __iomem *Hydra; #define HYDRA_INT_EXT2 13 /* PCI IRQX */ #define HYDRA_INT_EXT3 14 /* PCI IRQY */ #define HYDRA_INT_EXT4 15 /* PCI IRQZ */ -#define HYDRA_INT_EXT5 16 /* IDE Primay/Secondary */ +#define HYDRA_INT_EXT5 16 /* IDE Primary/Secondary */ #define HYDRA_INT_EXT6 17 /* IDE Secondary */ #define HYDRA_INT_EXT7 18 /* Power Off Request */ #define HYDRA_INT_SPARE 19 diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h index 6c1297ec374c..2fd1690b79d2 100644 --- a/arch/powerpc/include/asm/io.h +++ b/arch/powerpc/include/asm/io.h @@ -300,7 +300,7 @@ extern void _memcpy_toio(volatile void __iomem *dest, const void *src, * When CONFIG_PPC_INDIRECT_MMIO is set, the platform can provide hooks * on all MMIOs. (Note that this is all 64 bits only for now) * - * To help platforms who may need to differenciate MMIO addresses in + * To help platforms who may need to differentiate MMIO addresses in * their hooks, a bitfield is reserved for use by the platform near the * top of MMIO addresses (not PIO, those have to cope the hard way). * diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h index 3f191f573d4f..fd22442d30a9 100644 --- a/arch/powerpc/include/asm/machdep.h +++ b/arch/powerpc/include/asm/machdep.h @@ -54,7 +54,7 @@ struct machdep_calls { int psize, int apsize, int ssize); long (*hpte_remove)(unsigned long hpte_group); - void (*hpte_removebolted)(unsigned long ea, + int (*hpte_removebolted)(unsigned long ea, int psize, int ssize); void (*flush_hash_range)(unsigned long number, int local); void (*hugepage_invalidate)(unsigned long vsid, @@ -174,11 +174,11 @@ struct machdep_calls { platform, called once per cpu. */ void (*enable_pmcs)(void); - /* Set DABR for this platform, leave empty for default implemenation */ + /* Set DABR for this platform, leave empty for default implementation */ int (*set_dabr)(unsigned long dabr, unsigned long dabrx); - /* Set DAWR for this platform, leave empty for default implemenation */ + /* Set DAWR for this platform, leave empty for default implementation */ int (*set_dawr)(unsigned long dawr, unsigned long dawrx); diff --git a/arch/powerpc/include/asm/mmu-8xx.h b/arch/powerpc/include/asm/mmu-8xx.h index f05500a29a60..0a566f15f985 100644 --- a/arch/powerpc/include/asm/mmu-8xx.h +++ b/arch/powerpc/include/asm/mmu-8xx.h @@ -171,9 +171,9 @@ typedef struct { } mm_context_t; #endif /* !__ASSEMBLY__ */ -#if (PAGE_SHIFT == 12) +#if defined(CONFIG_PPC_4K_PAGES) #define mmu_virtual_psize MMU_PAGE_4K -#elif (PAGE_SHIFT == 14) +#elif defined(CONFIG_PPC_16K_PAGES) #define mmu_virtual_psize MMU_PAGE_16K #else #error "Unsupported PAGE_SIZE" diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index 3d5abfe6ba67..8ca1c983bf6c 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -97,6 +97,7 @@ #define MMU_FTRS_POWER6 MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE #define MMU_FTRS_POWER7 MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE #define MMU_FTRS_POWER8 MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE +#define MMU_FTRS_POWER9 MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE #define MMU_FTRS_CELL MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \ MMU_FTR_CI_LARGE_PAGE #define MMU_FTRS_PA6T MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \ @@ -182,10 +183,10 @@ static inline void assert_pte_locked(struct mm_struct *mm, unsigned long addr) #if defined(CONFIG_PPC_STD_MMU_64) /* 64-bit classic hash table MMU */ -# include <asm/mmu-hash64.h> +#include <asm/book3s/64/mmu-hash.h> #elif defined(CONFIG_PPC_STD_MMU_32) /* 32-bit classic hash table MMU */ -# include <asm/mmu-hash32.h> +#include <asm/book3s/32/mmu-hash.h> #elif defined(CONFIG_40x) /* 40x-style software loaded TLB */ # include <asm/mmu-40x.h> diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h index dcfcad139bcc..cd4ffd86765f 100644 --- a/arch/powerpc/include/asm/module.h +++ b/arch/powerpc/include/asm/module.h @@ -19,7 +19,7 @@ * Thanks to Paul M for explaining this. * * PPC can only do rel jumps += 32MB, and often the kernel and other - * modules are furthur away than this. So, we jump to a table of + * modules are further away than this. So, we jump to a table of * trampolines attached to the module (the Procedure Linkage Table) * whenever that happens. */ @@ -78,10 +78,18 @@ struct mod_arch_specific { # endif /* MODULE */ #endif -bool is_module_trampoline(u32 *insns); -int module_trampoline_target(struct module *mod, u32 *trampoline, +int module_trampoline_target(struct module *mod, unsigned long trampoline, unsigned long *target); +#ifdef CONFIG_DYNAMIC_FTRACE +int module_finalize_ftrace(struct module *mod, const Elf_Shdr *sechdrs); +#else +static inline int module_finalize_ftrace(struct module *mod, const Elf_Shdr *sechdrs) +{ + return 0; +} +#endif + struct exception_table_entry; void sort_ex_table(struct exception_table_entry *start, struct exception_table_entry *finish); diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h index c82cbf52d19e..780847597514 100644 --- a/arch/powerpc/include/asm/nohash/32/pgtable.h +++ b/arch/powerpc/include/asm/nohash/32/pgtable.h @@ -86,7 +86,7 @@ extern int icache_44x_need_flush; * We no longer map larger than phys RAM with the BATs so we don't have * to worry about the VMALLOC_OFFSET causing problems. We do have to worry * about clashes between our early calls to ioremap() that start growing down - * from ioremap_base being run into the VM area allocations (growing upwards + * from IOREMAP_TOP being run into the VM area allocations (growing upwards * from VMALLOC_START). For this reason we have ioremap_bot to check when * we actually run into our mappings setup in the early boot with the VM * system. This really does become a problem for machines with good amounts @@ -309,7 +309,8 @@ static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry) #define pte_index(address) \ (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) #define pte_offset_kernel(dir, addr) \ - ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr)) + (pmd_bad(*(dir)) ? NULL : (pte_t *)pmd_page_vaddr(*(dir)) + \ + pte_index(addr)) #define pte_offset_map(dir, addr) \ ((pte_t *) kmap_atomic(pmd_page(*(dir))) + pte_index(addr)) #define pte_unmap(pte) kunmap_atomic(pte) diff --git a/arch/powerpc/include/asm/nohash/64/pgtable.h b/arch/powerpc/include/asm/nohash/64/pgtable.h index b9f734dd5b81..10debb93c4a4 100644 --- a/arch/powerpc/include/asm/nohash/64/pgtable.h +++ b/arch/powerpc/include/asm/nohash/64/pgtable.h @@ -108,6 +108,9 @@ #ifndef __ASSEMBLY__ /* pte_clear moved to later in this file */ +/* Pointers in the page table tree are virtual addresses */ +#define __pgtable_ptr_val(ptr) ((unsigned long)(ptr)) + #define PMD_BAD_BITS (PTE_TABLE_SIZE-1) #define PUD_BAD_BITS (PMD_TABLE_SIZE-1) diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index 07a99e638449..9d86c6651716 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -248,6 +248,7 @@ extern int opal_elog_init(void); extern void opal_platform_dump_init(void); extern void opal_sys_param_init(void); extern void opal_msglog_init(void); +extern void opal_msglog_sysfs_init(void); extern int opal_async_comp_init(void); extern int opal_sensor_init(void); extern int opal_hmi_handler_init(void); @@ -273,6 +274,8 @@ void opal_free_sg_list(struct opal_sg_list *sg); extern int opal_error_code(int rc); +ssize_t opal_msglog_copy(char *to, loff_t pos, size_t count); + #endif /* __ASSEMBLY__ */ #endif /* _ASM_POWERPC_OPAL_H */ diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h index e34124f6fbf2..ab3d8977bacd 100644 --- a/arch/powerpc/include/asm/page.h +++ b/arch/powerpc/include/asm/page.h @@ -271,6 +271,13 @@ extern long long virt_phys_offset; #else #define PD_HUGE 0x80000000 #endif + +#else /* CONFIG_PPC_BOOK3S_64 */ +/* + * Book3S 64 stores real addresses in the hugepd entries to + * avoid overlaps with _PAGE_PRESENT and _PAGE_PTE. + */ +#define HUGEPD_ADDR_MASK (0x0ffffffffffffffful & ~HUGEPD_SHIFT_MASK) #endif /* CONFIG_PPC_BOOK3S_64 */ /* @@ -281,109 +288,7 @@ extern long long virt_phys_offset; #ifndef __ASSEMBLY__ -#ifdef CONFIG_STRICT_MM_TYPECHECKS -/* These are used to make use of C type-checking. */ - -/* PTE level */ -typedef struct { pte_basic_t pte; } pte_t; -#define __pte(x) ((pte_t) { (x) }) -static inline pte_basic_t pte_val(pte_t x) -{ - return x.pte; -} - -/* 64k pages additionally define a bigger "real PTE" type that gathers - * the "second half" part of the PTE for pseudo 64k pages - */ -#if defined(CONFIG_PPC_64K_PAGES) && defined(CONFIG_PPC_STD_MMU_64) -typedef struct { pte_t pte; unsigned long hidx; } real_pte_t; -#else -typedef struct { pte_t pte; } real_pte_t; -#endif - -/* PMD level */ -#ifdef CONFIG_PPC64 -typedef struct { unsigned long pmd; } pmd_t; -#define __pmd(x) ((pmd_t) { (x) }) -static inline unsigned long pmd_val(pmd_t x) -{ - return x.pmd; -} - -/* PUD level exusts only on 4k pages */ -#ifndef CONFIG_PPC_64K_PAGES -typedef struct { unsigned long pud; } pud_t; -#define __pud(x) ((pud_t) { (x) }) -static inline unsigned long pud_val(pud_t x) -{ - return x.pud; -} -#endif /* !CONFIG_PPC_64K_PAGES */ -#endif /* CONFIG_PPC64 */ - -/* PGD level */ -typedef struct { unsigned long pgd; } pgd_t; -#define __pgd(x) ((pgd_t) { (x) }) -static inline unsigned long pgd_val(pgd_t x) -{ - return x.pgd; -} - -/* Page protection bits */ -typedef struct { unsigned long pgprot; } pgprot_t; -#define pgprot_val(x) ((x).pgprot) -#define __pgprot(x) ((pgprot_t) { (x) }) - -#else - -/* - * .. while these make it easier on the compiler - */ - -typedef pte_basic_t pte_t; -#define __pte(x) (x) -static inline pte_basic_t pte_val(pte_t pte) -{ - return pte; -} - -#if defined(CONFIG_PPC_64K_PAGES) && defined(CONFIG_PPC_STD_MMU_64) -typedef struct { pte_t pte; unsigned long hidx; } real_pte_t; -#else -typedef pte_t real_pte_t; -#endif - - -#ifdef CONFIG_PPC64 -typedef unsigned long pmd_t; -#define __pmd(x) (x) -static inline unsigned long pmd_val(pmd_t pmd) -{ - return pmd; -} - -#ifndef CONFIG_PPC_64K_PAGES -typedef unsigned long pud_t; -#define __pud(x) (x) -static inline unsigned long pud_val(pud_t pud) -{ - return pud; -} -#endif /* !CONFIG_PPC_64K_PAGES */ -#endif /* CONFIG_PPC64 */ - -typedef unsigned long pgd_t; -#define __pgd(x) (x) -static inline unsigned long pgd_val(pgd_t pgd) -{ - return pgd; -} - -typedef unsigned long pgprot_t; -#define pgprot_val(x) (x) -#define __pgprot(x) (x) - -#endif +#include <asm/pgtable-types.h> typedef struct { signed long pd; } hugepd_t; diff --git a/arch/powerpc/include/asm/page_32.h b/arch/powerpc/include/asm/page_32.h index 68d73b2a7bfc..6a8e1797f223 100644 --- a/arch/powerpc/include/asm/page_32.h +++ b/arch/powerpc/include/asm/page_32.h @@ -1,6 +1,8 @@ #ifndef _ASM_POWERPC_PAGE_32_H #define _ASM_POWERPC_PAGE_32_H +#include <asm/cache.h> + #if defined(CONFIG_PHYSICAL_ALIGN) && (CONFIG_PHYSICAL_START != 0) #if (CONFIG_PHYSICAL_START % CONFIG_PHYSICAL_ALIGN) != 0 #error "CONFIG_PHYSICAL_START must be a multiple of CONFIG_PHYSICAL_ALIGN" @@ -36,9 +38,18 @@ typedef unsigned long long pte_basic_t; typedef unsigned long pte_basic_t; #endif -struct page; -extern void clear_pages(void *page, int order); -static inline void clear_page(void *page) { clear_pages(page, 0); } +/* + * Clear page using the dcbz instruction, which doesn't cause any + * memory traffic (except to write out any cache lines which get + * displaced). This only works on cacheable memory. + */ +static inline void clear_page(void *addr) +{ + unsigned int i; + + for (i = 0; i < PAGE_SIZE / L1_CACHE_BYTES; i++, addr += L1_CACHE_BYTES) + dcbz(addr); +} extern void copy_page(void *to, void *from); #include <asm-generic/getorder.h> diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 78968c1ff931..f5056e3394b4 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -211,15 +211,16 @@ struct pci_dn { #define IODA_INVALID_PE (-1) #ifdef CONFIG_PPC_POWERNV int pe_number; + int vf_index; /* VF index in the PF */ #ifdef CONFIG_PCI_IOV u16 vfs_expanded; /* number of VFs IOV BAR expanded */ u16 num_vfs; /* number of VFs enabled*/ - int offset; /* PE# for the first VF PE */ -#define M64_PER_IOV 4 - int m64_per_iov; + int *pe_num_map; /* PE# for the first VF PE or array */ + bool m64_single_mode; /* Use M64 BAR in Single Mode */ #define IODA_INVALID_M64 (-1) - int m64_wins[PCI_SRIOV_NUM_BARS][M64_PER_IOV]; + int (*m64_map)[PCI_SRIOV_NUM_BARS]; #endif /* CONFIG_PCI_IOV */ + int mps; /* Maximum Payload Size */ #endif struct list_head child_list; struct list_head list; diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h index 814622146d5a..e157489ee7a1 100644 --- a/arch/powerpc/include/asm/perf_event_server.h +++ b/arch/powerpc/include/asm/perf_event_server.h @@ -136,16 +136,24 @@ extern ssize_t power_events_sysfs_show(struct device *dev, * event 'cpu-cycles' can have two entries in sysfs: 'cpu-cycles' and * 'PM_CYC' where the latter is the name by which the event is known in * POWER CPU specification. + * + * Similarly, some hardware and cache events use the same event code. Eg. + * on POWER8, both "cache-references" and "L1-dcache-loads" events refer + * to the same event, PM_LD_REF_L1. The suffix, allows us to have two + * sysfs objects for the same event and thus two entries/aliases in sysfs. */ #define EVENT_VAR(_id, _suffix) event_attr_##_id##_suffix #define EVENT_PTR(_id, _suffix) &EVENT_VAR(_id, _suffix).attr.attr #define EVENT_ATTR(_name, _id, _suffix) \ - PMU_EVENT_ATTR(_name, EVENT_VAR(_id, _suffix), PME_##_id, \ + PMU_EVENT_ATTR(_name, EVENT_VAR(_id, _suffix), _id, \ power_events_sysfs_show) #define GENERIC_EVENT_ATTR(_name, _id) EVENT_ATTR(_name, _id, _g) #define GENERIC_EVENT_PTR(_id) EVENT_PTR(_id, _g) +#define CACHE_EVENT_ATTR(_name, _id) EVENT_ATTR(_name, _id, _c) +#define CACHE_EVENT_PTR(_id) EVENT_PTR(_id, _c) + #define POWER_EVENT_ATTR(_name, _id) EVENT_ATTR(_name, _id, _p) #define POWER_EVENT_PTR(_id) EVENT_PTR(_id, _p) diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h index 69ef28a81733..8d5fc3ac43da 100644 --- a/arch/powerpc/include/asm/pgalloc-64.h +++ b/arch/powerpc/include/asm/pgalloc-64.h @@ -53,7 +53,7 @@ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) #ifndef CONFIG_PPC_64K_PAGES -#define pgd_populate(MM, PGD, PUD) pgd_set(PGD, (unsigned long)PUD) +#define pgd_populate(MM, PGD, PUD) pgd_set(PGD, __pgtable_ptr_val(PUD)) static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr) { @@ -68,19 +68,19 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud) static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) { - pud_set(pud, (unsigned long)pmd); + pud_set(pud, __pgtable_ptr_val(pmd)); } static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) { - pmd_set(pmd, (unsigned long)pte); + pmd_set(pmd, __pgtable_ptr_val(pte)); } static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t pte_page) { - pmd_set(pmd, (unsigned long)page_address(pte_page)); + pmd_set(pmd, __pgtable_ptr_val(page_address(pte_page))); } #define pmd_pgtable(pmd) pmd_page(pmd) @@ -171,23 +171,45 @@ extern void pgtable_free_tlb(struct mmu_gather *tlb, void *table, int shift); extern void __tlb_remove_table(void *_table); #endif -#define pud_populate(mm, pud, pmd) pud_set(pud, (unsigned long)pmd) +#ifndef __PAGETABLE_PUD_FOLDED +/* book3s 64 is 4 level page table */ +static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud) +{ + pgd_set(pgd, __pgtable_ptr_val(pud)); +} + +static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr) +{ + return kmem_cache_alloc(PGT_CACHE(PUD_INDEX_SIZE), + GFP_KERNEL|__GFP_REPEAT); +} + +static inline void pud_free(struct mm_struct *mm, pud_t *pud) +{ + kmem_cache_free(PGT_CACHE(PUD_INDEX_SIZE), pud); +} +#endif + +static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) +{ + pud_set(pud, __pgtable_ptr_val(pmd)); +} static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) { - pmd_set(pmd, (unsigned long)pte); + pmd_set(pmd, __pgtable_ptr_val(pte)); } static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t pte_page) { - pmd_set(pmd, (unsigned long)pte_page); + pmd_set(pmd, __pgtable_ptr_val(pte_page)); } static inline pgtable_t pmd_pgtable(pmd_t pmd) { - return (pgtable_t)(pmd_val(pmd) & ~PMD_MASKED_BITS); + return (pgtable_t)pmd_page_vaddr(pmd); } static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, @@ -233,11 +255,11 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) #define __pmd_free_tlb(tlb, pmd, addr) \ pgtable_free_tlb(tlb, pmd, PMD_CACHE_INDEX) -#ifndef CONFIG_PPC_64K_PAGES +#ifndef __PAGETABLE_PUD_FOLDED #define __pud_free_tlb(tlb, pud, addr) \ pgtable_free_tlb(tlb, pud, PUD_INDEX_SIZE) -#endif /* CONFIG_PPC_64K_PAGES */ +#endif /* __PAGETABLE_PUD_FOLDED */ #define check_pgt_cache() do { } while (0) diff --git a/arch/powerpc/include/asm/pgtable-types.h b/arch/powerpc/include/asm/pgtable-types.h new file mode 100644 index 000000000000..43140f8b0592 --- /dev/null +++ b/arch/powerpc/include/asm/pgtable-types.h @@ -0,0 +1,103 @@ +#ifndef _ASM_POWERPC_PGTABLE_TYPES_H +#define _ASM_POWERPC_PGTABLE_TYPES_H + +#ifdef CONFIG_STRICT_MM_TYPECHECKS +/* These are used to make use of C type-checking. */ + +/* PTE level */ +typedef struct { pte_basic_t pte; } pte_t; +#define __pte(x) ((pte_t) { (x) }) +static inline pte_basic_t pte_val(pte_t x) +{ + return x.pte; +} + +/* PMD level */ +#ifdef CONFIG_PPC64 +typedef struct { unsigned long pmd; } pmd_t; +#define __pmd(x) ((pmd_t) { (x) }) +static inline unsigned long pmd_val(pmd_t x) +{ + return x.pmd; +} + +/* + * 64 bit hash always use 4 level table. Everybody else use 4 level + * only for 4K page size. + */ +#if defined(CONFIG_PPC_BOOK3S_64) || !defined(CONFIG_PPC_64K_PAGES) +typedef struct { unsigned long pud; } pud_t; +#define __pud(x) ((pud_t) { (x) }) +static inline unsigned long pud_val(pud_t x) +{ + return x.pud; +} +#endif /* CONFIG_PPC_BOOK3S_64 || !CONFIG_PPC_64K_PAGES */ +#endif /* CONFIG_PPC64 */ + +/* PGD level */ +typedef struct { unsigned long pgd; } pgd_t; +#define __pgd(x) ((pgd_t) { (x) }) +static inline unsigned long pgd_val(pgd_t x) +{ + return x.pgd; +} + +/* Page protection bits */ +typedef struct { unsigned long pgprot; } pgprot_t; +#define pgprot_val(x) ((x).pgprot) +#define __pgprot(x) ((pgprot_t) { (x) }) + +#else + +/* + * .. while these make it easier on the compiler + */ + +typedef pte_basic_t pte_t; +#define __pte(x) (x) +static inline pte_basic_t pte_val(pte_t pte) +{ + return pte; +} + +#ifdef CONFIG_PPC64 +typedef unsigned long pmd_t; +#define __pmd(x) (x) +static inline unsigned long pmd_val(pmd_t pmd) +{ + return pmd; +} + +#if defined(CONFIG_PPC_BOOK3S_64) || !defined(CONFIG_PPC_64K_PAGES) +typedef unsigned long pud_t; +#define __pud(x) (x) +static inline unsigned long pud_val(pud_t pud) +{ + return pud; +} +#endif /* CONFIG_PPC_BOOK3S_64 || !CONFIG_PPC_64K_PAGES */ +#endif /* CONFIG_PPC64 */ + +typedef unsigned long pgd_t; +#define __pgd(x) (x) +static inline unsigned long pgd_val(pgd_t pgd) +{ + return pgd; +} + +typedef unsigned long pgprot_t; +#define pgprot_val(x) (x) +#define __pgprot(x) (x) + +#endif /* CONFIG_STRICT_MM_TYPECHECKS */ +/* + * With hash config 64k pages additionally define a bigger "real PTE" type that + * gathers the "second half" part of the PTE for pseudo 64k pages + */ +#if defined(CONFIG_PPC_64K_PAGES) && defined(CONFIG_PPC_STD_MMU_64) +typedef struct { pte_t pte; unsigned long hidx; } real_pte_t; +#else +typedef struct { pte_t pte; } real_pte_t; +#endif +#endif /* _ASM_POWERPC_PGTABLE_TYPES_H */ diff --git a/arch/powerpc/include/asm/pmac_feature.h b/arch/powerpc/include/asm/pmac_feature.h index 10902c9375d0..925697968946 100644 --- a/arch/powerpc/include/asm/pmac_feature.h +++ b/arch/powerpc/include/asm/pmac_feature.h @@ -46,7 +46,7 @@ /* PowerSurge are the first generation of PCI Pmacs. This include * all of the Grand-Central based machines. We currently don't - * differenciate most of them. + * differentiate most of them. */ #define PMAC_TYPE_PSURGE 0x10 /* PowerSurge */ #define PMAC_TYPE_ANS 0x11 /* Apple Network Server */ diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index ac2330820b9a..8ab8a1a9610a 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -236,7 +236,9 @@ struct thread_struct { #endif struct arch_hw_breakpoint hw_brk; /* info on the hardware breakpoint */ unsigned long trap_nr; /* last trap # on this thread */ + u8 load_fp; #ifdef CONFIG_ALTIVEC + u8 load_vec; struct thread_vr_state vr_state; struct thread_vr_state *vr_save_area; unsigned long vrsave; diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index c4cb2ffc624e..f5f4c66bbbc9 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -75,6 +75,14 @@ #define MSR_HV 0 #endif +/* + * To be used in shared book E/book S, this avoids needing to worry about + * book S/book E in shared code + */ +#ifndef MSR_SPE +#define MSR_SPE 0 +#endif + #define MSR_VEC __MASK(MSR_VEC_LG) /* Enable AltiVec */ #define MSR_VSX __MASK(MSR_VSX_LG) /* Enable VSX */ #define MSR_POW __MASK(MSR_POW_LG) /* Enable Power Management */ @@ -376,7 +384,7 @@ #define SPRN_TSCR 0x399 /* Thread Switch Control Register */ #define SPRN_DEC 0x016 /* Decrement Register */ -#define SPRN_DER 0x095 /* Debug Enable Regsiter */ +#define SPRN_DER 0x095 /* Debug Enable Register */ #define DER_RSTE 0x40000000 /* Reset Interrupt */ #define DER_CHSTPE 0x20000000 /* Check Stop */ #define DER_MCIE 0x10000000 /* Machine Check Interrupt */ @@ -401,7 +409,7 @@ #define SPRN_DPDES 0x0B0 /* Directed Priv. Doorbell Exc. State */ #define SPRN_EAR 0x11A /* External Address Register */ #define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */ -#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */ +#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Register */ #define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */ #define HID0_HDICE_SH (63 - 23) /* 970 HDEC interrupt enable */ #define HID0_EMCP (1<<31) /* Enable Machine Check pin */ @@ -514,7 +522,7 @@ #define ICTRL_EICP 0x00000100 /* enable icache par. check */ #define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */ #define SPRN_IMMR 0x27E /* Internal Memory Map Register */ -#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */ +#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Register */ #define SPRN_L2CR2 0x3f8 #define L2CR_L2E 0x80000000 /* L2 enable */ #define L2CR_L2PE 0x40000000 /* L2 parity enable */ @@ -549,7 +557,7 @@ #define L2CR_L2DO_745x 0x00010000 /* L2 data only (745x) */ #define L2CR_L2REP_745x 0x00001000 /* L2 repl. algorithm (745x) */ #define L2CR_L2HWF_745x 0x00000800 /* L2 hardware flush (745x) */ -#define SPRN_L3CR 0x3FA /* Level 3 Cache Control Regsiter */ +#define SPRN_L3CR 0x3FA /* Level 3 Cache Control Register */ #define L3CR_L3E 0x80000000 /* L3 enable */ #define L3CR_L3PE 0x40000000 /* L3 data parity enable */ #define L3CR_L3APE 0x20000000 /* L3 addr parity enable */ @@ -1211,9 +1219,11 @@ static inline void mtmsr_isync(unsigned long val) #define mfspr(rn) ({unsigned long rval; \ asm volatile("mfspr %0," __stringify(rn) \ : "=r" (rval)); rval;}) +#ifndef mtspr #define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : \ : "r" ((unsigned long)(v)) \ : "memory") +#endif extern void msr_check_and_set(unsigned long bits); extern bool strict_msr_control; diff --git a/arch/powerpc/include/asm/reg_8xx.h b/arch/powerpc/include/asm/reg_8xx.h index e8ea346b21d3..94d01f81e668 100644 --- a/arch/powerpc/include/asm/reg_8xx.h +++ b/arch/powerpc/include/asm/reg_8xx.h @@ -4,6 +4,8 @@ #ifndef _ASM_POWERPC_REG_8xx_H #define _ASM_POWERPC_REG_8xx_H +#include <asm/mmu-8xx.h> + /* Cache control on the MPC8xx is provided through some additional * special purpose registers. */ @@ -14,6 +16,15 @@ #define SPRN_DC_ADR 569 /* Address needed for some commands */ #define SPRN_DC_DAT 570 /* Read-only data register */ +/* Misc Debug */ +#define SPRN_DPDR 630 +#define SPRN_MI_CAM 816 +#define SPRN_MI_RAM0 817 +#define SPRN_MI_RAM1 818 +#define SPRN_MD_CAM 824 +#define SPRN_MD_RAM0 825 +#define SPRN_MD_RAM1 826 + /* Commands. Only the first few are available to the instruction cache. */ #define IDC_ENABLE 0x02000000 /* Cache enable */ @@ -39,4 +50,86 @@ #define DC_DFWT 0x40000000 /* Data cache is forced write through */ #define DC_LES 0x20000000 /* Caches are little endian mode */ +#ifdef CONFIG_8xx_CPU6 +#define do_mtspr_cpu6(rn, rn_addr, v) \ + do { \ + int _reg_cpu6 = rn_addr, _tmp_cpu6; \ + asm volatile("stw %0, %1;" \ + "lwz %0, %1;" \ + "mtspr " __stringify(rn) ",%2" : \ + : "r" (_reg_cpu6), "m"(_tmp_cpu6), \ + "r" ((unsigned long)(v)) \ + : "memory"); \ + } while (0) + +#define do_mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : \ + : "r" ((unsigned long)(v)) \ + : "memory") +#define mtspr(rn, v) \ + do { \ + if (rn == SPRN_IMMR) \ + do_mtspr_cpu6(rn, 0x3d30, v); \ + else if (rn == SPRN_IC_CST) \ + do_mtspr_cpu6(rn, 0x2110, v); \ + else if (rn == SPRN_IC_ADR) \ + do_mtspr_cpu6(rn, 0x2310, v); \ + else if (rn == SPRN_IC_DAT) \ + do_mtspr_cpu6(rn, 0x2510, v); \ + else if (rn == SPRN_DC_CST) \ + do_mtspr_cpu6(rn, 0x3110, v); \ + else if (rn == SPRN_DC_ADR) \ + do_mtspr_cpu6(rn, 0x3310, v); \ + else if (rn == SPRN_DC_DAT) \ + do_mtspr_cpu6(rn, 0x3510, v); \ + else if (rn == SPRN_MI_CTR) \ + do_mtspr_cpu6(rn, 0x2180, v); \ + else if (rn == SPRN_MI_AP) \ + do_mtspr_cpu6(rn, 0x2580, v); \ + else if (rn == SPRN_MI_EPN) \ + do_mtspr_cpu6(rn, 0x2780, v); \ + else if (rn == SPRN_MI_TWC) \ + do_mtspr_cpu6(rn, 0x2b80, v); \ + else if (rn == SPRN_MI_RPN) \ + do_mtspr_cpu6(rn, 0x2d80, v); \ + else if (rn == SPRN_MI_CAM) \ + do_mtspr_cpu6(rn, 0x2190, v); \ + else if (rn == SPRN_MI_RAM0) \ + do_mtspr_cpu6(rn, 0x2390, v); \ + else if (rn == SPRN_MI_RAM1) \ + do_mtspr_cpu6(rn, 0x2590, v); \ + else if (rn == SPRN_MD_CTR) \ + do_mtspr_cpu6(rn, 0x3180, v); \ + else if (rn == SPRN_M_CASID) \ + do_mtspr_cpu6(rn, 0x3380, v); \ + else if (rn == SPRN_MD_AP) \ + do_mtspr_cpu6(rn, 0x3580, v); \ + else if (rn == SPRN_MD_EPN) \ + do_mtspr_cpu6(rn, 0x3780, v); \ + else if (rn == SPRN_M_TWB) \ + do_mtspr_cpu6(rn, 0x3980, v); \ + else if (rn == SPRN_MD_TWC) \ + do_mtspr_cpu6(rn, 0x3b80, v); \ + else if (rn == SPRN_MD_RPN) \ + do_mtspr_cpu6(rn, 0x3d80, v); \ + else if (rn == SPRN_M_TW) \ + do_mtspr_cpu6(rn, 0x3f80, v); \ + else if (rn == SPRN_MD_CAM) \ + do_mtspr_cpu6(rn, 0x3190, v); \ + else if (rn == SPRN_MD_RAM0) \ + do_mtspr_cpu6(rn, 0x3390, v); \ + else if (rn == SPRN_MD_RAM1) \ + do_mtspr_cpu6(rn, 0x3590, v); \ + else if (rn == SPRN_DEC) \ + do_mtspr_cpu6(rn, 0x2c00, v); \ + else if (rn == SPRN_TBWL) \ + do_mtspr_cpu6(rn, 0x3880, v); \ + else if (rn == SPRN_TBWU) \ + do_mtspr_cpu6(rn, 0x3a80, v); \ + else if (rn == SPRN_DPDR) \ + do_mtspr_cpu6(rn, 0x2d30, v); \ + else \ + do_mtspr(rn, v); \ + } while (0) +#endif + #endif /* _ASM_POWERPC_REG_8xx_H */ diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 2fef74b474f0..737e012ef56e 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -681,7 +681,7 @@ #define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */ #define SPRN_TBHI 0x3DC /* Time Base High */ #define SPRN_TBLO 0x3DD /* Time Base Low */ -#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */ +#define SPRN_DBCR 0x3F2 /* Debug Control Register */ #define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */ #define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */ #define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */ diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h index a5e930aca804..abf5866e08c6 100644 --- a/arch/powerpc/include/asm/sections.h +++ b/arch/powerpc/include/asm/sections.h @@ -22,6 +22,18 @@ static inline int in_kernel_text(unsigned long addr) return 0; } +static inline unsigned long kernel_toc_addr(void) +{ + /* Defined by the linker, see vmlinux.lds.S */ + extern unsigned long __toc_start; + + /* + * The TOC register (r2) points 32kB into the TOC, so that 64kB of + * the TOC can be addressed using a single machine instruction. + */ + return (unsigned long)(&__toc_start) + 0x8000UL; +} + static inline int overlaps_interrupt_vector_text(unsigned long start, unsigned long end) { diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h index 78083ed20792..e1afd4c4f695 100644 --- a/arch/powerpc/include/asm/smp.h +++ b/arch/powerpc/include/asm/smp.h @@ -67,6 +67,9 @@ void generic_cpu_die(unsigned int cpu); void generic_set_cpu_dead(unsigned int cpu); void generic_set_cpu_up(unsigned int cpu); int generic_check_cpu_restart(unsigned int cpu); +int is_cpu_dead(unsigned int cpu); +#else +#define generic_set_cpu_up(i) do { } while (0) #endif #ifdef CONFIG_PPC64 @@ -201,6 +204,7 @@ extern void generic_secondary_thread_init(void); extern unsigned long __secondary_hold_spinloop; extern unsigned long __secondary_hold_acknowledge; extern char __secondary_hold; +extern unsigned int booting_thread_hwid; extern void __early_start(void); #endif /* __ASSEMBLY__ */ diff --git a/arch/powerpc/include/asm/smu.h b/arch/powerpc/include/asm/smu.h index 37d2da6feabf..f280dd11243f 100644 --- a/arch/powerpc/include/asm/smu.h +++ b/arch/powerpc/include/asm/smu.h @@ -154,7 +154,7 @@ * * The Darwin I2C driver is less subtle though. On any non-success status * from the response command, it waits 5ms and tries again up to 20 times, - * it doesn't differenciate between fatal errors or "busy" status. + * it doesn't differentiate between fatal errors or "busy" status. * * This driver provides an asynchronous paramblock based i2c command * interface to be used either directly by low level code or by a higher diff --git a/arch/powerpc/include/asm/switch_to.h b/arch/powerpc/include/asm/switch_to.h index 5b268b6be74c..17c8380673a6 100644 --- a/arch/powerpc/include/asm/switch_to.h +++ b/arch/powerpc/include/asm/switch_to.h @@ -28,12 +28,14 @@ extern void giveup_all(struct task_struct *); extern void enable_kernel_fp(void); extern void flush_fp_to_thread(struct task_struct *); extern void giveup_fpu(struct task_struct *); -extern void __giveup_fpu(struct task_struct *); +extern void save_fpu(struct task_struct *); static inline void disable_kernel_fp(void) { msr_check_and_clear(MSR_FP); } #else +static inline void __giveup_fpu(struct task_struct *t) { } +static inline void save_fpu(struct task_struct *t) { } static inline void flush_fp_to_thread(struct task_struct *t) { } #endif @@ -41,18 +43,19 @@ static inline void flush_fp_to_thread(struct task_struct *t) { } extern void enable_kernel_altivec(void); extern void flush_altivec_to_thread(struct task_struct *); extern void giveup_altivec(struct task_struct *); -extern void __giveup_altivec(struct task_struct *); +extern void save_altivec(struct task_struct *); static inline void disable_kernel_altivec(void) { msr_check_and_clear(MSR_VEC); } +#else +static inline void save_altivec(struct task_struct *t) { } +static inline void __giveup_altivec(struct task_struct *t) { } #endif #ifdef CONFIG_VSX extern void enable_kernel_vsx(void); extern void flush_vsx_to_thread(struct task_struct *); -extern void giveup_vsx(struct task_struct *); -extern void __giveup_vsx(struct task_struct *); static inline void disable_kernel_vsx(void) { msr_check_and_clear(MSR_FP|MSR_VEC|MSR_VSX); @@ -68,6 +71,8 @@ static inline void disable_kernel_spe(void) { msr_check_and_clear(MSR_SPE); } +#else +static inline void __giveup_spe(struct task_struct *t) { } #endif static inline void clear_task_ebb(struct task_struct *t) diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h index 2d7109a8d296..1092fdd7e737 100644 --- a/arch/powerpc/include/asm/time.h +++ b/arch/powerpc/include/asm/time.h @@ -31,8 +31,6 @@ extern void tick_broadcast_ipi_handler(void); extern void generic_calibrate_decr(void); -extern void set_dec_cpu6(unsigned int val); - /* Some sane defaults: 125 MHz timebase, 1GHz processor */ extern unsigned long ppc_proc_freq; #define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8) @@ -166,14 +164,12 @@ static inline void set_dec(int val) { #if defined(CONFIG_40x) mtspr(SPRN_PIT, val); -#elif defined(CONFIG_8xx_CPU6) - set_dec_cpu6(val - 1); #else #ifndef CONFIG_BOOKE --val; #endif mtspr(SPRN_DEC, val); -#endif /* not 40x or 8xx_CPU6 */ +#endif /* not 40x */ } static inline unsigned long tb_ticks_since(unsigned long tstamp) diff --git a/arch/powerpc/include/asm/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h index 23d351ca0303..9f77f85e3e99 100644 --- a/arch/powerpc/include/asm/tlbflush.h +++ b/arch/powerpc/include/asm/tlbflush.h @@ -78,97 +78,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) } #elif defined(CONFIG_PPC_STD_MMU_64) - -#define MMU_NO_CONTEXT 0 - -/* - * TLB flushing for 64-bit hash-MMU CPUs - */ - -#include <linux/percpu.h> -#include <asm/page.h> - -#define PPC64_TLB_BATCH_NR 192 - -struct ppc64_tlb_batch { - int active; - unsigned long index; - struct mm_struct *mm; - real_pte_t pte[PPC64_TLB_BATCH_NR]; - unsigned long vpn[PPC64_TLB_BATCH_NR]; - unsigned int psize; - int ssize; -}; -DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch); - -extern void __flush_tlb_pending(struct ppc64_tlb_batch *batch); - -#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE - -static inline void arch_enter_lazy_mmu_mode(void) -{ - struct ppc64_tlb_batch *batch = this_cpu_ptr(&ppc64_tlb_batch); - - batch->active = 1; -} - -static inline void arch_leave_lazy_mmu_mode(void) -{ - struct ppc64_tlb_batch *batch = this_cpu_ptr(&ppc64_tlb_batch); - - if (batch->index) - __flush_tlb_pending(batch); - batch->active = 0; -} - -#define arch_flush_lazy_mmu_mode() do {} while (0) - - -extern void flush_hash_page(unsigned long vpn, real_pte_t pte, int psize, - int ssize, unsigned long flags); -extern void flush_hash_range(unsigned long number, int local); -extern void flush_hash_hugepage(unsigned long vsid, unsigned long addr, - pmd_t *pmdp, unsigned int psize, int ssize, - unsigned long flags); - -static inline void local_flush_tlb_mm(struct mm_struct *mm) -{ -} - -static inline void flush_tlb_mm(struct mm_struct *mm) -{ -} - -static inline void local_flush_tlb_page(struct vm_area_struct *vma, - unsigned long vmaddr) -{ -} - -static inline void flush_tlb_page(struct vm_area_struct *vma, - unsigned long vmaddr) -{ -} - -static inline void flush_tlb_page_nohash(struct vm_area_struct *vma, - unsigned long vmaddr) -{ -} - -static inline void flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) -{ -} - -static inline void flush_tlb_kernel_range(unsigned long start, - unsigned long end) -{ -} - -/* Private function for use by PCI IO mapping code */ -extern void __flush_hash_table_range(struct mm_struct *mm, unsigned long start, - unsigned long end); -extern void flush_tlb_pmd_range(struct mm_struct *mm, pmd_t *pmd, - unsigned long addr); +#include <asm/book3s/64/tlbflush-hash.h> #else #error Unsupported MMU type #endif diff --git a/arch/powerpc/include/asm/uninorth.h b/arch/powerpc/include/asm/uninorth.h index d12b11d7641e..a1d112979fd2 100644 --- a/arch/powerpc/include/asm/uninorth.h +++ b/arch/powerpc/include/asm/uninorth.h @@ -132,7 +132,7 @@ /* This one _might_ return the CPU number of the CPU reading it; * the bootROM decides whether to boot or to sleep/spinloop depending - * on this register beeing 0 or not + * on this register being 0 or not */ #define UNI_N_CPU_NUMBER 0x0050 diff --git a/arch/powerpc/include/asm/xics.h b/arch/powerpc/include/asm/xics.h index 254604856e69..04ef3ae511da 100644 --- a/arch/powerpc/include/asm/xics.h +++ b/arch/powerpc/include/asm/xics.h @@ -1,5 +1,5 @@ /* - * Common definitions accross all variants of ICP and ICS interrupt + * Common definitions across all variants of ICP and ICS interrupt * controllers. */ diff --git a/arch/powerpc/include/uapi/asm/epapr_hcalls.h b/arch/powerpc/include/uapi/asm/epapr_hcalls.h index 7f9c74b46704..b4504f394427 100644 --- a/arch/powerpc/include/uapi/asm/epapr_hcalls.h +++ b/arch/powerpc/include/uapi/asm/epapr_hcalls.h @@ -78,7 +78,7 @@ #define EV_SUCCESS 0 #define EV_EPERM 1 /* Operation not permitted */ #define EV_ENOENT 2 /* Entry Not Found */ -#define EV_EIO 3 /* I/O error occured */ +#define EV_EIO 3 /* I/O error occurred */ #define EV_EAGAIN 4 /* The operation had insufficient * resources to complete and should be * retried @@ -89,7 +89,7 @@ #define EV_ENODEV 7 /* No such device */ #define EV_EINVAL 8 /* An argument supplied to the hcall was out of range or invalid */ -#define EV_INTERNAL 9 /* An internal error occured */ +#define EV_INTERNAL 9 /* An internal error occurred */ #define EV_CONFIG 10 /* A configuration error was detected */ #define EV_INVALID_STATE 11 /* The object is in an invalid state */ #define EV_UNIMPLEMENTED 12 /* Unimplemented hypercall */ diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 794f22adf99d..2da380fcc34c 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -16,14 +16,14 @@ endif ifdef CONFIG_FUNCTION_TRACER # Do not trace early boot code -CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog -CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog -CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog -CFLAGS_REMOVE_prom.o = -pg -mno-sched-epilog +CFLAGS_REMOVE_cputable.o = -mno-sched-epilog $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_prom_init.o = -mno-sched-epilog $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_btext.o = -mno-sched-epilog $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_prom.o = -mno-sched-epilog $(CC_FLAGS_FTRACE) # do not trace tracer code -CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog +CFLAGS_REMOVE_ftrace.o = -mno-sched-epilog $(CC_FLAGS_FTRACE) # timers used by tracing -CFLAGS_REMOVE_time.o = -pg -mno-sched-epilog +CFLAGS_REMOVE_time.o = -mno-sched-epilog $(CC_FLAGS_FTRACE) endif obj-y := cputable.o ptrace.o syscalls.o \ diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 07cebc3514f3..0d0183d3180a 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -95,12 +95,14 @@ int main(void) DEFINE(THREAD_FPSTATE, offsetof(struct thread_struct, fp_state)); DEFINE(THREAD_FPSAVEAREA, offsetof(struct thread_struct, fp_save_area)); DEFINE(FPSTATE_FPSCR, offsetof(struct thread_fp_state, fpscr)); + DEFINE(THREAD_LOAD_FP, offsetof(struct thread_struct, load_fp)); #ifdef CONFIG_ALTIVEC DEFINE(THREAD_VRSTATE, offsetof(struct thread_struct, vr_state)); DEFINE(THREAD_VRSAVEAREA, offsetof(struct thread_struct, vr_save_area)); DEFINE(THREAD_VRSAVE, offsetof(struct thread_struct, vrsave)); DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr)); DEFINE(VRSTATE_VSCR, offsetof(struct thread_vr_state, vscr)); + DEFINE(THREAD_LOAD_VEC, offsetof(struct thread_struct, load_vec)); #endif /* CONFIG_ALTIVEC */ #ifdef CONFIG_VSX DEFINE(THREAD_USED_VSR, offsetof(struct thread_struct, used_vsr)); @@ -374,6 +376,7 @@ int main(void) DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features)); DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup)); DEFINE(CPU_SPEC_RESTORE, offsetof(struct cpu_spec, cpu_restore)); + DEFINE(CPU_DOWN_FLUSH, offsetof(struct cpu_spec, cpu_down_flush)); DEFINE(pbe_address, offsetof(struct pbe, address)); DEFINE(pbe_orig_address, offsetof(struct pbe, orig_address)); diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S index dddba3e94260..462aed9bcf51 100644 --- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S +++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S @@ -13,11 +13,13 @@ * */ +#include <asm/page.h> #include <asm/processor.h> #include <asm/cputable.h> #include <asm/ppc_asm.h> #include <asm/mmu-book3e.h> #include <asm/asm-offsets.h> +#include <asm/mpc85xx.h> _GLOBAL(__e500_icache_setup) mfspr r0, SPRN_L1CSR1 @@ -233,3 +235,113 @@ _GLOBAL(__setup_cpu_e5500) mtlr r5 blr #endif + +/* flush L1 date cache, it can apply to e500v2, e500mc and e5500 */ +_GLOBAL(flush_dcache_L1) + mfmsr r10 + wrteei 0 + + mfspr r3,SPRN_L1CFG0 + rlwinm r5,r3,9,3 /* Extract cache block size */ + twlgti r5,1 /* Only 32 and 64 byte cache blocks + * are currently defined. + */ + li r4,32 + subfic r6,r5,2 /* r6 = log2(1KiB / cache block size) - + * log2(number of ways) + */ + slw r5,r4,r5 /* r5 = cache block size */ + + rlwinm r7,r3,0,0xff /* Extract number of KiB in the cache */ + mulli r7,r7,13 /* An 8-way cache will require 13 + * loads per set. + */ + slw r7,r7,r6 + + /* save off HID0 and set DCFA */ + mfspr r8,SPRN_HID0 + ori r9,r8,HID0_DCFA@l + mtspr SPRN_HID0,r9 + isync + + LOAD_REG_IMMEDIATE(r6, KERNELBASE) + mr r4, r6 + mtctr r7 + +1: lwz r3,0(r4) /* Load... */ + add r4,r4,r5 + bdnz 1b + + msync + mr r4, r6 + mtctr r7 + +1: dcbf 0,r4 /* ...and flush. */ + add r4,r4,r5 + bdnz 1b + + /* restore HID0 */ + mtspr SPRN_HID0,r8 + isync + + wrtee r10 + + blr + +has_L2_cache: + /* skip L2 cache on P2040/P2040E as they have no L2 cache */ + mfspr r3, SPRN_SVR + /* shift right by 8 bits and clear E bit of SVR */ + rlwinm r4, r3, 24, ~0x800 + + lis r3, SVR_P2040@h + ori r3, r3, SVR_P2040@l + cmpw r4, r3 + beq 1f + + li r3, 1 + blr +1: + li r3, 0 + blr + +/* flush backside L2 cache */ +flush_backside_L2_cache: + mflr r10 + bl has_L2_cache + mtlr r10 + cmpwi r3, 0 + beq 2f + + /* Flush the L2 cache */ + mfspr r3, SPRN_L2CSR0 + ori r3, r3, L2CSR0_L2FL@l + msync + isync + mtspr SPRN_L2CSR0,r3 + isync + + /* check if it is complete */ +1: mfspr r3,SPRN_L2CSR0 + andi. r3, r3, L2CSR0_L2FL@l + bne 1b +2: + blr + +_GLOBAL(cpu_down_flush_e500v2) + mflr r0 + bl flush_dcache_L1 + mtlr r0 + blr + +_GLOBAL(cpu_down_flush_e500mc) +_GLOBAL(cpu_down_flush_e5500) + mflr r0 + bl flush_dcache_L1 + bl flush_backside_L2_cache + mtlr r0 + blr + +/* L1 Data Cache of e6500 contains no modified data, no flush is required */ +_GLOBAL(cpu_down_flush_e6500) + blr diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S index 9c9b7411b28b..584e119fa8b0 100644 --- a/arch/powerpc/kernel/cpu_setup_power.S +++ b/arch/powerpc/kernel/cpu_setup_power.S @@ -15,6 +15,7 @@ #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> #include <asm/cache.h> +#include <asm/book3s/64/mmu-hash.h> /* Entry: r3 = crap, r4 = ptr to cputable entry * @@ -83,6 +84,39 @@ _GLOBAL(__restore_cpu_power8) mtlr r11 blr +_GLOBAL(__setup_cpu_power9) + mflr r11 + bl __init_FSCR + bl __init_hvmode_206 + mtlr r11 + beqlr + li r0,0 + mtspr SPRN_LPID,r0 + mfspr r3,SPRN_LPCR + ori r3, r3, LPCR_PECEDH + bl __init_LPCR + bl __init_HFSCR + bl __init_tlb_power9 + mtlr r11 + blr + +_GLOBAL(__restore_cpu_power9) + mflr r11 + bl __init_FSCR + mfmsr r3 + rldicl. r0,r3,4,63 + mtlr r11 + beqlr + li r0,0 + mtspr SPRN_LPID,r0 + mfspr r3,SPRN_LPCR + ori r3, r3, LPCR_PECEDH + bl __init_LPCR + bl __init_HFSCR + bl __init_tlb_power9 + mtlr r11 + blr + __init_hvmode_206: /* Disable CPU_FTR_HVMODE and exit if MSR:HV is not set */ mfmsr r3 @@ -139,7 +173,7 @@ __init_HFSCR: * (invalidate by congruence class). P7 has 128 CCs., P8 has 512. */ __init_tlb_power7: - li r6,128 + li r6,POWER7_TLB_SETS mtctr r6 li r7,0xc00 /* IS field = 0b11 */ ptesync @@ -150,7 +184,18 @@ __init_tlb_power7: 1: blr __init_tlb_power8: - li r6,512 + li r6,POWER8_TLB_SETS + mtctr r6 + li r7,0xc00 /* IS field = 0b11 */ + ptesync +2: tlbiel r7 + addi r7,r7,0x1000 + bdnz 2b + ptesync +1: blr + +__init_tlb_power9: + li r6,POWER9_TLB_SETS_HASH mtctr r6 li r7,0xc00 /* IS field = 0b11 */ ptesync diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 7d80bfdfb15e..6c662b8de90d 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -70,9 +70,12 @@ extern void __setup_cpu_power7(unsigned long offset, struct cpu_spec* spec); extern void __restore_cpu_power7(void); extern void __setup_cpu_power8(unsigned long offset, struct cpu_spec* spec); extern void __restore_cpu_power8(void); +extern void __setup_cpu_power9(unsigned long offset, struct cpu_spec* spec); +extern void __restore_cpu_power9(void); extern void __restore_cpu_a2(void); extern void __flush_tlb_power7(unsigned int action); extern void __flush_tlb_power8(unsigned int action); +extern void __flush_tlb_power9(unsigned int action); extern long __machine_check_early_realmode_p7(struct pt_regs *regs); extern long __machine_check_early_realmode_p8(struct pt_regs *regs); #endif /* CONFIG_PPC64 */ @@ -116,6 +119,11 @@ extern void __restore_cpu_e6500(void); #define COMMON_USER_PA6T (COMMON_USER_PPC64 | PPC_FEATURE_PA6T |\ PPC_FEATURE_TRUE_LE | \ PPC_FEATURE_HAS_ALTIVEC_COMP) +#define COMMON_USER_POWER9 COMMON_USER_POWER8 +#define COMMON_USER2_POWER9 (COMMON_USER2_POWER8 | \ + PPC_FEATURE2_ARCH_3_00 | \ + PPC_FEATURE2_HAS_IEEE128) + #ifdef CONFIG_PPC_BOOK3E_64 #define COMMON_USER_BOOKE (COMMON_USER_PPC64 | PPC_FEATURE_BOOKE) #else @@ -499,6 +507,25 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check_early = __machine_check_early_realmode_p8, .platform = "power8", }, + { /* Power9 */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x004e0000, + .cpu_name = "POWER9 (raw)", + .cpu_features = CPU_FTRS_POWER9, + .cpu_user_features = COMMON_USER_POWER9, + .cpu_user_features2 = COMMON_USER2_POWER9, + .mmu_features = MMU_FTRS_POWER9, + .icache_bsize = 128, + .dcache_bsize = 128, + .num_pmcs = 6, + .pmc_type = PPC_PMC_IBM, + .oprofile_cpu_type = "ppc64/power9", + .oprofile_type = PPC_OPROFILE_INVALID, + .cpu_setup = __setup_cpu_power9, + .cpu_restore = __restore_cpu_power9, + .flush_tlb = __flush_tlb_power9, + .platform = "power9", + }, { /* Cell Broadband Engine */ .pvr_mask = 0xffff0000, .pvr_value = 0x00700000, @@ -2023,6 +2050,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_setup = __setup_cpu_e500v2, .machine_check = machine_check_e500, .platform = "ppc8548", + .cpu_down_flush = cpu_down_flush_e500v2, }, #else { /* e500mc */ @@ -2042,6 +2070,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_setup = __setup_cpu_e500mc, .machine_check = machine_check_e500mc, .platform = "ppce500mc", + .cpu_down_flush = cpu_down_flush_e500mc, }, #endif /* CONFIG_PPC_E500MC */ #endif /* CONFIG_PPC32 */ @@ -2066,6 +2095,7 @@ static struct cpu_spec __initdata cpu_specs[] = { #endif .machine_check = machine_check_e500mc, .platform = "ppce5500", + .cpu_down_flush = cpu_down_flush_e5500, }, { /* e6500 */ .pvr_mask = 0xffff0000, @@ -2088,6 +2118,7 @@ static struct cpu_spec __initdata cpu_specs[] = { #endif .machine_check = machine_check_e500mc, .platform = "ppce6500", + .cpu_down_flush = cpu_down_flush_e6500, }, #endif /* CONFIG_PPC_E500MC */ #ifdef CONFIG_PPC32 diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c index 40e4d4a27663..6544017eb90b 100644 --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -268,13 +268,6 @@ static void *eeh_dump_pe_log(void *data, void *flag) struct eeh_dev *edev, *tmp; size_t *plen = flag; - /* If the PE's config space is blocked, 0xFF's will be - * returned. It's pointless to collect the log in this - * case. - */ - if (pe->state & EEH_PE_CFG_BLOCKED) - return NULL; - eeh_pe_for_each_dev(pe, edev, tmp) *plen += eeh_dump_dev_log(edev, pci_regs_buf + *plen, EEH_PCI_REGS_LOG_LEN - *plen); @@ -677,7 +670,7 @@ int eeh_pci_enable(struct eeh_pe *pe, int function) /* Check if the request is finished successfully */ if (active_flag) { rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC); - if (rc <= 0) + if (rc < 0) return rc; if (rc & active_flag) @@ -739,7 +732,7 @@ static void *eeh_restore_dev_state(void *data, void *userdata) } /** - * pcibios_set_pcie_slot_reset - Set PCI-E reset state + * pcibios_set_pcie_reset_state - Set PCI-E reset state * @dev: pci device struct * @state: reset state to enter * @@ -761,7 +754,8 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat case pcie_deassert_reset: eeh_ops->reset(pe, EEH_RESET_DEACTIVATE); eeh_unfreeze_pe(pe, false); - eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED); + if (!(pe->type & EEH_PE_VF)) + eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED); eeh_pe_dev_traverse(pe, eeh_restore_dev_state, dev); eeh_pe_state_clear(pe, EEH_PE_ISOLATED); break; @@ -769,14 +763,16 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat eeh_pe_state_mark_with_cfg(pe, EEH_PE_ISOLATED); eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE); eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev); - eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED); + if (!(pe->type & EEH_PE_VF)) + eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED); eeh_ops->reset(pe, EEH_RESET_HOT); break; case pcie_warm_reset: eeh_pe_state_mark_with_cfg(pe, EEH_PE_ISOLATED); eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE); eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev); - eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED); + if (!(pe->type & EEH_PE_VF)) + eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED); eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL); break; default: @@ -1243,6 +1239,14 @@ void eeh_remove_device(struct pci_dev *dev) * from the parent PE during the BAR resotre. */ edev->pdev = NULL; + + /* + * The flag "in_error" is used to trace EEH devices for VFs + * in error state or not. It's set in eeh_report_error(). If + * it's not set, eeh_report_{reset,resume}() won't be called + * for the VF EEH device. + */ + edev->in_error = false; dev->dev.archdata.edev = NULL; if (!(edev->pe->state & EEH_PE_KEEP)) eeh_rmv_from_parent_pe(edev); @@ -1537,6 +1541,17 @@ int eeh_pe_get_state(struct eeh_pe *pe) if (!eeh_ops || !eeh_ops->get_state) return -ENOENT; + /* + * If the parent PE is owned by the host kernel and is undergoing + * error recovery, we should return the PE state as temporarily + * unavailable so that the error recovery on the guest is suspended + * until the recovery completes on the host. + */ + if (pe->parent && + !(pe->state & EEH_PE_REMOVED) && + (pe->parent->state & (EEH_PE_ISOLATED | EEH_PE_RECOVERING))) + return EEH_PE_STATE_UNAVAIL; + result = eeh_ops->get_state(pe, NULL); rst_active = !!(result & EEH_STATE_RESET_ACTIVE); dma_en = !!(result & EEH_STATE_DMA_ENABLED); diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c index a1e86e172e3c..ddbcfab7efdf 100644 --- a/arch/powerpc/kernel/eeh_cache.c +++ b/arch/powerpc/kernel/eeh_cache.c @@ -195,8 +195,11 @@ static void __eeh_addr_cache_insert_dev(struct pci_dev *dev) return; } - /* Walk resources on this device, poke them into the tree */ - for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + /* + * Walk resources on this device, poke the first 7 (6 normal BAR and 1 + * ROM BAR) into the tree. + */ + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { resource_size_t start = pci_resource_start(dev,i); resource_size_t end = pci_resource_end(dev,i); unsigned long flags = pci_resource_flags(dev,i); @@ -222,10 +225,6 @@ void eeh_addr_cache_insert_dev(struct pci_dev *dev) { unsigned long flags; - /* Ignore PCI bridges */ - if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) - return; - spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); __eeh_addr_cache_insert_dev(dev); spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); diff --git a/arch/powerpc/kernel/eeh_dev.c b/arch/powerpc/kernel/eeh_dev.c index aabba94ff9cb..7815095fe3d8 100644 --- a/arch/powerpc/kernel/eeh_dev.c +++ b/arch/powerpc/kernel/eeh_dev.c @@ -67,6 +67,7 @@ void *eeh_dev_init(struct pci_dn *pdn, void *data) edev->pdn = pdn; edev->phb = phb; INIT_LIST_HEAD(&edev->list); + INIT_LIST_HEAD(&edev->rmv_list); return NULL; } diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c index 650cfb31ea3d..fb6207d2c604 100644 --- a/arch/powerpc/kernel/eeh_driver.c +++ b/arch/powerpc/kernel/eeh_driver.c @@ -34,6 +34,11 @@ #include <asm/prom.h> #include <asm/rtas.h> +struct eeh_rmv_data { + struct list_head edev_list; + int removed; +}; + /** * eeh_pcid_name - Retrieve name of PCI device driver * @pdev: PCI device @@ -190,7 +195,7 @@ static void *eeh_report_error(void *data, void *userdata) enum pci_ers_result rc, *res = userdata; struct pci_driver *driver; - if (!dev || eeh_dev_removed(edev)) + if (!dev || eeh_dev_removed(edev) || eeh_pe_passed(edev->pe)) return NULL; dev->error_state = pci_channel_io_frozen; @@ -211,6 +216,7 @@ static void *eeh_report_error(void *data, void *userdata) if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; if (*res == PCI_ERS_RESULT_NONE) *res = rc; + edev->in_error = true; eeh_pcid_put(dev); return NULL; } @@ -231,7 +237,7 @@ static void *eeh_report_mmio_enabled(void *data, void *userdata) enum pci_ers_result rc, *res = userdata; struct pci_driver *driver; - if (!dev || eeh_dev_removed(edev)) + if (!dev || eeh_dev_removed(edev) || eeh_pe_passed(edev->pe)) return NULL; driver = eeh_pcid_get(dev); @@ -271,7 +277,7 @@ static void *eeh_report_reset(void *data, void *userdata) enum pci_ers_result rc, *res = userdata; struct pci_driver *driver; - if (!dev || eeh_dev_removed(edev)) + if (!dev || eeh_dev_removed(edev) || eeh_pe_passed(edev->pe)) return NULL; dev->error_state = pci_channel_io_normal; @@ -282,7 +288,8 @@ static void *eeh_report_reset(void *data, void *userdata) if (!driver->err_handler || !driver->err_handler->slot_reset || - (edev->mode & EEH_DEV_NO_HANDLER)) { + (edev->mode & EEH_DEV_NO_HANDLER) || + (!edev->in_error)) { eeh_pcid_put(dev); return NULL; } @@ -326,20 +333,23 @@ static void *eeh_report_resume(void *data, void *userdata) { struct eeh_dev *edev = (struct eeh_dev *)data; struct pci_dev *dev = eeh_dev_to_pci_dev(edev); + bool was_in_error; struct pci_driver *driver; - if (!dev || eeh_dev_removed(edev)) + if (!dev || eeh_dev_removed(edev) || eeh_pe_passed(edev->pe)) return NULL; dev->error_state = pci_channel_io_normal; driver = eeh_pcid_get(dev); if (!driver) return NULL; + was_in_error = edev->in_error; + edev->in_error = false; eeh_enable_irq(dev); if (!driver->err_handler || !driver->err_handler->resume || - (edev->mode & EEH_DEV_NO_HANDLER)) { + (edev->mode & EEH_DEV_NO_HANDLER) || !was_in_error) { edev->mode &= ~EEH_DEV_NO_HANDLER; eeh_pcid_put(dev); return NULL; @@ -365,7 +375,7 @@ static void *eeh_report_failure(void *data, void *userdata) struct pci_dev *dev = eeh_dev_to_pci_dev(edev); struct pci_driver *driver; - if (!dev || eeh_dev_removed(edev)) + if (!dev || eeh_dev_removed(edev) || eeh_pe_passed(edev->pe)) return NULL; dev->error_state = pci_channel_io_perm_failure; @@ -386,12 +396,40 @@ static void *eeh_report_failure(void *data, void *userdata) return NULL; } +static void *eeh_add_virt_device(void *data, void *userdata) +{ + struct pci_driver *driver; + struct eeh_dev *edev = (struct eeh_dev *)data; + struct pci_dev *dev = eeh_dev_to_pci_dev(edev); + struct pci_dn *pdn = eeh_dev_to_pdn(edev); + + if (!(edev->physfn)) { + pr_warn("%s: EEH dev %04x:%02x:%02x.%01x not for VF\n", + __func__, edev->phb->global_number, pdn->busno, + PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn)); + return NULL; + } + + driver = eeh_pcid_get(dev); + if (driver) { + eeh_pcid_put(dev); + if (driver->err_handler) + return NULL; + } + +#ifdef CONFIG_PPC_POWERNV + pci_iov_add_virtfn(edev->physfn, pdn->vf_index, 0); +#endif + return NULL; +} + static void *eeh_rmv_device(void *data, void *userdata) { struct pci_driver *driver; struct eeh_dev *edev = (struct eeh_dev *)data; struct pci_dev *dev = eeh_dev_to_pci_dev(edev); - int *removed = (int *)userdata; + struct eeh_rmv_data *rmv_data = (struct eeh_rmv_data *)userdata; + int *removed = rmv_data ? &rmv_data->removed : NULL; /* * Actually, we should remove the PCI bridges as well. @@ -416,7 +454,11 @@ static void *eeh_rmv_device(void *data, void *userdata) driver = eeh_pcid_get(dev); if (driver) { eeh_pcid_put(dev); - if (driver->err_handler && + if (removed && + eeh_pe_passed(edev->pe)) + return NULL; + if (removed && + driver->err_handler && driver->err_handler->error_detected && driver->err_handler->slot_reset) return NULL; @@ -427,11 +469,29 @@ static void *eeh_rmv_device(void *data, void *userdata) pci_name(dev)); edev->bus = dev->bus; edev->mode |= EEH_DEV_DISCONNECTED; - (*removed)++; + if (removed) + (*removed)++; - pci_lock_rescan_remove(); - pci_stop_and_remove_bus_device(dev); - pci_unlock_rescan_remove(); + if (edev->physfn) { +#ifdef CONFIG_PPC_POWERNV + struct pci_dn *pdn = eeh_dev_to_pdn(edev); + + pci_iov_remove_virtfn(edev->physfn, pdn->vf_index, 0); + edev->pdev = NULL; + + /* + * We have to set the VF PE number to invalid one, which is + * required to plug the VF successfully. + */ + pdn->pe_number = IODA_INVALID_PE; +#endif + if (rmv_data) + list_add(&edev->rmv_list, &rmv_data->edev_list); + } else { + pci_lock_rescan_remove(); + pci_stop_and_remove_bus_device(dev); + pci_unlock_rescan_remove(); + } return NULL; } @@ -545,11 +605,13 @@ int eeh_pe_reset_and_recover(struct eeh_pe *pe) * During the reset, udev might be invoked because those affected * PCI devices will be removed and then added. */ -static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus) +static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus, + struct eeh_rmv_data *rmv_data) { struct pci_bus *frozen_bus = eeh_pe_bus_get(pe); struct timeval tstamp; - int cnt, rc, removed = 0; + int cnt, rc; + struct eeh_dev *edev; /* pcibios will clear the counter; save the value */ cnt = pe->freeze_count; @@ -563,12 +625,16 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus) */ eeh_pe_state_mark(pe, EEH_PE_KEEP); if (bus) { - eeh_pe_state_clear(pe, EEH_PE_PRI_BUS); - pci_lock_rescan_remove(); - pcibios_remove_pci_devices(bus); - pci_unlock_rescan_remove(); + if (pe->type & EEH_PE_VF) { + eeh_pe_dev_traverse(pe, eeh_rmv_device, NULL); + } else { + eeh_pe_state_clear(pe, EEH_PE_PRI_BUS); + pci_lock_rescan_remove(); + pcibios_remove_pci_devices(bus); + pci_unlock_rescan_remove(); + } } else if (frozen_bus) { - eeh_pe_dev_traverse(pe, eeh_rmv_device, &removed); + eeh_pe_dev_traverse(pe, eeh_rmv_device, &rmv_data); } /* @@ -610,14 +676,22 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus) * PE. We should disconnect it so the binding can be * rebuilt when adding PCI devices. */ + edev = list_first_entry(&pe->edevs, struct eeh_dev, list); eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL); - pcibios_add_pci_devices(bus); - } else if (frozen_bus && removed) { + if (pe->type & EEH_PE_VF) + eeh_add_virt_device(edev, NULL); + else + pcibios_add_pci_devices(bus); + } else if (frozen_bus && rmv_data->removed) { pr_info("EEH: Sleep 5s ahead of partial hotplug\n"); ssleep(5); + edev = list_first_entry(&pe->edevs, struct eeh_dev, list); eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL); - pcibios_add_pci_devices(frozen_bus); + if (pe->type & EEH_PE_VF) + eeh_add_virt_device(edev, NULL); + else + pcibios_add_pci_devices(frozen_bus); } eeh_pe_state_clear(pe, EEH_PE_KEEP); @@ -636,8 +710,10 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus) static void eeh_handle_normal_event(struct eeh_pe *pe) { struct pci_bus *frozen_bus; + struct eeh_dev *edev, *tmp; int rc = 0; enum pci_ers_result result = PCI_ERS_RESULT_NONE; + struct eeh_rmv_data rmv_data = {LIST_HEAD_INIT(rmv_data.edev_list), 0}; frozen_bus = eeh_pe_bus_get(pe); if (!frozen_bus) { @@ -692,7 +768,7 @@ static void eeh_handle_normal_event(struct eeh_pe *pe) */ if (result == PCI_ERS_RESULT_NONE) { pr_info("EEH: Reset with hotplug activity\n"); - rc = eeh_reset_device(pe, frozen_bus); + rc = eeh_reset_device(pe, frozen_bus, NULL); if (rc) { pr_warn("%s: Unable to reset, err=%d\n", __func__, rc); @@ -744,7 +820,7 @@ static void eeh_handle_normal_event(struct eeh_pe *pe) /* If any device called out for a reset, then reset the slot */ if (result == PCI_ERS_RESULT_NEED_RESET) { pr_info("EEH: Reset without hotplug activity\n"); - rc = eeh_reset_device(pe, NULL); + rc = eeh_reset_device(pe, NULL, &rmv_data); if (rc) { pr_warn("%s: Cannot reset, err=%d\n", __func__, rc); @@ -764,6 +840,15 @@ static void eeh_handle_normal_event(struct eeh_pe *pe) goto hard_fail; } + /* + * For those hot removed VFs, we should add back them after PF get + * recovered properly. + */ + list_for_each_entry_safe(edev, tmp, &rmv_data.edev_list, rmv_list) { + eeh_add_virt_device(edev, NULL); + list_del(&edev->rmv_list); + } + /* Tell all device drivers that they can resume operations */ pr_info("EEH: Notify device driver to resume\n"); eeh_pe_dev_traverse(pe, eeh_report_resume, NULL); @@ -803,12 +888,17 @@ perm_error: * the their PCI config any more. */ if (frozen_bus) { - eeh_pe_state_clear(pe, EEH_PE_PRI_BUS); - eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED); + if (pe->type & EEH_PE_VF) { + eeh_pe_dev_traverse(pe, eeh_rmv_device, NULL); + eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED); + } else { + eeh_pe_state_clear(pe, EEH_PE_PRI_BUS); + eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED); - pci_lock_rescan_remove(); - pcibios_remove_pci_devices(frozen_bus); - pci_unlock_rescan_remove(); + pci_lock_rescan_remove(); + pcibios_remove_pci_devices(frozen_bus); + pci_unlock_rescan_remove(); + } } } diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c index 98f81800e00c..eea48d8baf49 100644 --- a/arch/powerpc/kernel/eeh_pe.c +++ b/arch/powerpc/kernel/eeh_pe.c @@ -299,7 +299,10 @@ static struct eeh_pe *eeh_pe_get_parent(struct eeh_dev *edev) * EEH device already having associated PE, but * the direct parent EEH device doesn't have yet. */ - pdn = pdn ? pdn->parent : NULL; + if (edev->physfn) + pdn = pci_get_pdn(edev->physfn); + else + pdn = pdn ? pdn->parent : NULL; while (pdn) { /* We're poking out of PCI territory */ parent = pdn_to_eeh_dev(pdn); @@ -382,7 +385,10 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev) } /* Create a new EEH PE */ - pe = eeh_pe_alloc(edev->phb, EEH_PE_DEVICE); + if (edev->physfn) + pe = eeh_pe_alloc(edev->phb, EEH_PE_VF); + else + pe = eeh_pe_alloc(edev->phb, EEH_PE_DEVICE); if (!pe) { pr_err("%s: out of memory!\n", __func__); return -ENOMEM; @@ -920,25 +926,21 @@ const char *eeh_pe_loc_get(struct eeh_pe *pe) */ struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe) { - struct pci_bus *bus = NULL; struct eeh_dev *edev; struct pci_dev *pdev; - if (pe->type & EEH_PE_PHB) { - bus = pe->phb->bus; - } else if (pe->type & EEH_PE_BUS || - pe->type & EEH_PE_DEVICE) { - if (pe->state & EEH_PE_PRI_BUS) { - bus = pe->bus; - goto out; - } + if (pe->type & EEH_PE_PHB) + return pe->phb->bus; - edev = list_first_entry(&pe->edevs, struct eeh_dev, list); - pdev = eeh_dev_to_pci_dev(edev); - if (pdev) - bus = pdev->bus; - } + /* The primary bus might be cached during probe time */ + if (pe->state & EEH_PE_PRI_BUS) + return pe->bus; -out: - return bus; + /* Retrieve the parent PCI bus of first (top) PCI device */ + edev = list_first_entry_or_null(&pe->edevs, struct eeh_dev, list); + pdev = eeh_dev_to_pci_dev(edev); + if (pdev) + return pdev->bus; + + return NULL; } diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 0d525ce3717f..9916d150b28c 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -210,7 +210,29 @@ system_call: /* label this so stack traces look sane */ li r11,-MAX_ERRNO andi. r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK) bne- syscall_exit_work - cmpld r3,r11 + + andi. r0,r8,MSR_FP + beq 2f +#ifdef CONFIG_ALTIVEC + andis. r0,r8,MSR_VEC@h + bne 3f +#endif +2: addi r3,r1,STACK_FRAME_OVERHEAD +#ifdef CONFIG_PPC_BOOK3S + mtmsrd r10,1 /* Restore RI */ +#endif + bl restore_math +#ifdef CONFIG_PPC_BOOK3S + ld r10,PACAKMSR(r13) + li r9,MSR_RI + andc r11,r10,r9 /* Re-clear RI */ + mtmsrd r11,1 +#endif + ld r8,_MSR(r1) + ld r3,RESULT(r1) + li r11,-MAX_ERRNO + +3: cmpld r3,r11 ld r5,_CCR(r1) bge- syscall_error .Lsyscall_error_cont: @@ -602,8 +624,8 @@ _GLOBAL(ret_from_except_lite) /* Check current_thread_info()->flags */ andi. r0,r4,_TIF_USER_WORK_MASK -#ifdef CONFIG_PPC_BOOK3E bne 1f +#ifdef CONFIG_PPC_BOOK3E /* * Check to see if the dbcr0 register is set up to debug. * Use the internal debug mode bit to do this. @@ -618,7 +640,9 @@ _GLOBAL(ret_from_except_lite) mtspr SPRN_DBSR,r10 b restore #else - beq restore + addi r3,r1,STACK_FRAME_OVERHEAD + bl restore_math + b restore #endif 1: andi. r0,r4,_TIF_NEED_RESCHED beq 2f @@ -1143,8 +1167,12 @@ _GLOBAL(enter_prom) #ifdef CONFIG_DYNAMIC_FTRACE _GLOBAL(mcount) _GLOBAL(_mcount) - blr + mflr r12 + mtctr r12 + mtlr r0 + bctr +#ifndef CC_USING_MPROFILE_KERNEL _GLOBAL_TOC(ftrace_caller) /* Taken from output of objdump from lib64/glibc */ mflr r3 @@ -1166,6 +1194,115 @@ _GLOBAL(ftrace_graph_stub) ld r0, 128(r1) mtlr r0 addi r1, r1, 112 + +#else /* CC_USING_MPROFILE_KERNEL */ +/* + * + * ftrace_caller() is the function that replaces _mcount() when ftrace is + * active. + * + * We arrive here after a function A calls function B, and we are the trace + * function for B. When we enter r1 points to A's stack frame, B has not yet + * had a chance to allocate one yet. + * + * Additionally r2 may point either to the TOC for A, or B, depending on + * whether B did a TOC setup sequence before calling us. + * + * On entry the LR points back to the _mcount() call site, and r0 holds the + * saved LR as it was on entry to B, ie. the original return address at the + * call site in A. + * + * Our job is to save the register state into a struct pt_regs (on the stack) + * and then arrange for the ftrace function to be called. + */ +_GLOBAL(ftrace_caller) + /* Save the original return address in A's stack frame */ + std r0,LRSAVE(r1) + + /* Create our stack frame + pt_regs */ + stdu r1,-SWITCH_FRAME_SIZE(r1) + + /* Save all gprs to pt_regs */ + SAVE_8GPRS(0,r1) + SAVE_8GPRS(8,r1) + SAVE_8GPRS(16,r1) + SAVE_8GPRS(24,r1) + + /* Load special regs for save below */ + mfmsr r8 + mfctr r9 + mfxer r10 + mfcr r11 + + /* Get the _mcount() call site out of LR */ + mflr r7 + /* Save it as pt_regs->nip & pt_regs->link */ + std r7, _NIP(r1) + std r7, _LINK(r1) + + /* Save callee's TOC in the ABI compliant location */ + std r2, 24(r1) + ld r2,PACATOC(r13) /* get kernel TOC in r2 */ + + addis r3,r2,function_trace_op@toc@ha + addi r3,r3,function_trace_op@toc@l + ld r5,0(r3) + + /* Calculate ip from nip-4 into r3 for call below */ + subi r3, r7, MCOUNT_INSN_SIZE + + /* Put the original return address in r4 as parent_ip */ + mr r4, r0 + + /* Save special regs */ + std r8, _MSR(r1) + std r9, _CTR(r1) + std r10, _XER(r1) + std r11, _CCR(r1) + + /* Load &pt_regs in r6 for call below */ + addi r6, r1 ,STACK_FRAME_OVERHEAD + + /* ftrace_call(r3, r4, r5, r6) */ +.globl ftrace_call +ftrace_call: + bl ftrace_stub + nop + + /* Load ctr with the possibly modified NIP */ + ld r3, _NIP(r1) + mtctr r3 + + /* Restore gprs */ + REST_8GPRS(0,r1) + REST_8GPRS(8,r1) + REST_8GPRS(16,r1) + REST_8GPRS(24,r1) + + /* Restore callee's TOC */ + ld r2, 24(r1) + + /* Pop our stack frame */ + addi r1, r1, SWITCH_FRAME_SIZE + + /* Restore original LR for return to B */ + ld r0, LRSAVE(r1) + mtlr r0 + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + stdu r1, -112(r1) +.globl ftrace_graph_call +ftrace_graph_call: + b ftrace_graph_stub +_GLOBAL(ftrace_graph_stub) + addi r1, r1, 112 +#endif + + ld r0,LRSAVE(r1) /* restore callee's lr at _mcount site */ + mtlr r0 + bctr /* jump after _mcount site */ +#endif /* CC_USING_MPROFILE_KERNEL */ + _GLOBAL(ftrace_stub) blr #else @@ -1198,6 +1335,7 @@ _GLOBAL(ftrace_stub) #endif /* CONFIG_DYNAMIC_FTRACE */ #ifdef CONFIG_FUNCTION_GRAPH_TRACER +#ifndef CC_USING_MPROFILE_KERNEL _GLOBAL(ftrace_graph_caller) /* load r4 with local address */ ld r4, 128(r1) @@ -1222,6 +1360,56 @@ _GLOBAL(ftrace_graph_caller) addi r1, r1, 112 blr +#else /* CC_USING_MPROFILE_KERNEL */ +_GLOBAL(ftrace_graph_caller) + /* with -mprofile-kernel, parameter regs are still alive at _mcount */ + std r10, 104(r1) + std r9, 96(r1) + std r8, 88(r1) + std r7, 80(r1) + std r6, 72(r1) + std r5, 64(r1) + std r4, 56(r1) + std r3, 48(r1) + + /* Save callee's TOC in the ABI compliant location */ + std r2, 24(r1) + ld r2, PACATOC(r13) /* get kernel TOC in r2 */ + + mfctr r4 /* ftrace_caller has moved local addr here */ + std r4, 40(r1) + mflr r3 /* ftrace_caller has restored LR from stack */ + subi r4, r4, MCOUNT_INSN_SIZE + + bl prepare_ftrace_return + nop + + /* + * prepare_ftrace_return gives us the address we divert to. + * Change the LR to this. + */ + mtlr r3 + + ld r0, 40(r1) + mtctr r0 + ld r10, 104(r1) + ld r9, 96(r1) + ld r8, 88(r1) + ld r7, 80(r1) + ld r6, 72(r1) + ld r5, 64(r1) + ld r4, 56(r1) + ld r3, 48(r1) + + /* Restore callee's TOC */ + ld r2, 24(r1) + + addi r1, r1, 112 + mflr r0 + std r0, LRSAVE(r1) + bctr +#endif /* CC_USING_MPROFILE_KERNEL */ + _GLOBAL(return_to_handler) /* need to save return values */ std r4, -32(r1) diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S index 2117eaca3d28..15da2b5df85e 100644 --- a/arch/powerpc/kernel/fpu.S +++ b/arch/powerpc/kernel/fpu.S @@ -130,6 +130,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX) or r12,r12,r4 std r12,_MSR(r1) #endif + /* Don't care if r4 overflows, this is desired behaviour */ + lbz r4,THREAD_LOAD_FP(r5) + addi r4,r4,1 + stb r4,THREAD_LOAD_FP(r5) addi r10,r5,THREAD_FPSTATE lfd fr0,FPSTATE_FPSCR(r10) MTFSF_L(fr0) @@ -139,33 +143,20 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX) blr /* - * __giveup_fpu(tsk) - * Disable FP for the task given as the argument, - * and save the floating-point registers in its thread_struct. + * save_fpu(tsk) + * Save the floating-point registers in its thread_struct. * Enables the FPU for use in the kernel on return. */ -_GLOBAL(__giveup_fpu) +_GLOBAL(save_fpu) addi r3,r3,THREAD /* want THREAD of task */ PPC_LL r6,THREAD_FPSAVEAREA(r3) PPC_LL r5,PT_REGS(r3) PPC_LCMPI 0,r6,0 bne 2f addi r6,r3,THREAD_FPSTATE -2: PPC_LCMPI 0,r5,0 - SAVE_32FPVSRS(0, R4, R6) +2: SAVE_32FPVSRS(0, R4, R6) mffs fr0 stfd fr0,FPSTATE_FPSCR(r6) - beq 1f - PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5) - li r3,MSR_FP|MSR_FE0|MSR_FE1 -#ifdef CONFIG_VSX -BEGIN_FTR_SECTION - oris r3,r3,MSR_VSX@h -END_FTR_SECTION_IFSET(CPU_FTR_VSX) -#endif - andc r4,r4,r3 /* disable FP for previous task */ - PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: blr /* diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c index 44d4d8eb3c85..9dac18dabd03 100644 --- a/arch/powerpc/kernel/ftrace.c +++ b/arch/powerpc/kernel/ftrace.c @@ -61,8 +61,11 @@ ftrace_modify_code(unsigned long ip, unsigned int old, unsigned int new) return -EFAULT; /* Make sure it is what we expect it to be */ - if (replaced != old) + if (replaced != old) { + pr_err("%p: replaced (%#x) != old (%#x)", + (void *)ip, replaced, old); return -EINVAL; + } /* replace the text with the new text */ if (patch_instruction((unsigned int *)ip, new)) @@ -106,14 +109,15 @@ static int __ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, unsigned long addr) { - unsigned int op; - unsigned long entry, ptr; + unsigned long entry, ptr, tramp; unsigned long ip = rec->ip; - void *tramp; + unsigned int op, pop; /* read where this goes */ - if (probe_kernel_read(&op, (void *)ip, sizeof(int))) + if (probe_kernel_read(&op, (void *)ip, sizeof(int))) { + pr_err("Fetching opcode failed.\n"); return -EFAULT; + } /* Make sure that that this is still a 24bit jump */ if (!is_bl_op(op)) { @@ -122,14 +126,9 @@ __ftrace_make_nop(struct module *mod, } /* lets find where the pointer goes */ - tramp = (void *)find_bl_target(ip, op); - - pr_devel("ip:%lx jumps to %p", ip, tramp); + tramp = find_bl_target(ip, op); - if (!is_module_trampoline(tramp)) { - pr_err("Not a trampoline\n"); - return -EINVAL; - } + pr_devel("ip:%lx jumps to %lx", ip, tramp); if (module_trampoline_target(mod, tramp, &ptr)) { pr_err("Failed to get trampoline target\n"); @@ -158,10 +157,42 @@ __ftrace_make_nop(struct module *mod, * * Use a b +8 to jump over the load. */ - op = 0x48000008; /* b +8 */ - if (patch_instruction((unsigned int *)ip, op)) + pop = PPC_INST_BRANCH | 8; /* b +8 */ + + /* + * Check what is in the next instruction. We can see ld r2,40(r1), but + * on first pass after boot we will see mflr r0. + */ + if (probe_kernel_read(&op, (void *)(ip+4), MCOUNT_INSN_SIZE)) { + pr_err("Fetching op failed.\n"); + return -EFAULT; + } + + if (op != PPC_INST_LD_TOC) { + unsigned int inst; + + if (probe_kernel_read(&inst, (void *)(ip - 4), 4)) { + pr_err("Fetching instruction at %lx failed.\n", ip - 4); + return -EFAULT; + } + + /* We expect either a mlfr r0, or a std r0, LRSAVE(r1) */ + if (inst != PPC_INST_MFLR && inst != PPC_INST_STD_LR) { + pr_err("Unexpected instructions around bl _mcount\n" + "when enabling dynamic ftrace!\t" + "(%08x,bl,%08x)\n", inst, op); + return -EINVAL; + } + + /* When using -mkernel_profile there is no load to jump over */ + pop = PPC_INST_NOP; + } + + if (patch_instruction((unsigned int *)ip, pop)) { + pr_err("Patching NOP failed.\n"); return -EPERM; + } return 0; } @@ -287,16 +318,15 @@ int ftrace_make_nop(struct module *mod, #ifdef CONFIG_MODULES #ifdef CONFIG_PPC64 +/* + * Examine the existing instructions for __ftrace_make_call. + * They should effectively be a NOP, and follow formal constraints, + * depending on the ABI. Return false if they don't. + */ +#ifndef CC_USING_MPROFILE_KERNEL static int -__ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) +expected_nop_sequence(void *ip, unsigned int op0, unsigned int op1) { - unsigned int op[2]; - void *ip = (void *)rec->ip; - - /* read where this goes */ - if (probe_kernel_read(op, ip, sizeof(op))) - return -EFAULT; - /* * We expect to see: * @@ -306,8 +336,34 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) * The load offset is different depending on the ABI. For simplicity * just mask it out when doing the compare. */ - if ((op[0] != 0x48000008) || ((op[1] & 0xffff0000) != 0xe8410000)) { - pr_err("Unexpected call sequence: %x %x\n", op[0], op[1]); + if ((op0 != 0x48000008) || ((op1 & 0xffff0000) != 0xe8410000)) + return 0; + return 1; +} +#else +static int +expected_nop_sequence(void *ip, unsigned int op0, unsigned int op1) +{ + /* look for patched "NOP" on ppc64 with -mprofile-kernel */ + if (op0 != PPC_INST_NOP) + return 0; + return 1; +} +#endif + +static int +__ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned int op[2]; + void *ip = (void *)rec->ip; + + /* read where this goes */ + if (probe_kernel_read(op, ip, sizeof(op))) + return -EFAULT; + + if (!expected_nop_sequence(ip, op[0], op[1])) { + pr_err("Unexpected call sequence at %p: %x %x\n", + ip, op[0], op[1]); return -EINVAL; } @@ -330,7 +386,16 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) return 0; } -#else + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS +int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr, + unsigned long addr) +{ + return ftrace_make_call(rec, addr); +} +#endif + +#else /* !CONFIG_PPC64: */ static int __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) { @@ -455,20 +520,13 @@ void ftrace_replace_code(int enable) } } +/* + * Use the default ftrace_modify_all_code, but without + * stop_machine(). + */ void arch_ftrace_update_code(int command) { - if (command & FTRACE_UPDATE_CALLS) - ftrace_replace_code(1); - else if (command & FTRACE_DISABLE_CALLS) - ftrace_replace_code(0); - - if (command & FTRACE_UPDATE_TRACE_FUNC) - ftrace_update_ftrace_func(ftrace_trace_function); - - if (command & FTRACE_START_FUNC_RET) - ftrace_enable_ftrace_graph_caller(); - else if (command & FTRACE_STOP_FUNC_RET) - ftrace_disable_ftrace_graph_caller(); + ftrace_modify_all_code(command); } int __init ftrace_dyn_arch_init(void) diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index b5061abbd2e0..9cdf5c71e426 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -806,7 +806,7 @@ _GLOBAL(set_context) _GLOBAL(init_cpu_state) mflr r22 #ifdef CONFIG_PPC_47x - /* We use the PVR to differenciate 44x cores from 476 */ + /* We use the PVR to differentiate 44x cores from 476 */ mfspr r3,SPRN_PVR srwi r3,r3,16 cmplwi cr0,r3,PVR_476FPE@h diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 1b779560728f..4286775cbde9 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -40,6 +40,8 @@ #include <asm/kvm_book3s_asm.h> #include <asm/ptrace.h> #include <asm/hw_irq.h> +#include <asm/cputhreads.h> +#include <asm/ppc-opcode.h> /* The physical memory is laid out such that the secondary processor * spin code sits at 0x0000...0x00ff. On server, the vectors follow @@ -181,6 +183,64 @@ exception_marker: #endif #ifdef CONFIG_PPC_BOOK3E +/* + * The booting_thread_hwid holds the thread id we want to boot in cpu + * hotplug case. It is set by cpu hotplug code, and is invalid by default. + * The thread id is the same as the initial value of SPRN_PIR[THREAD_ID] + * bit field. + */ + .globl booting_thread_hwid +booting_thread_hwid: + .long INVALID_THREAD_HWID + .align 3 +/* + * start a thread in the same core + * input parameters: + * r3 = the thread physical id + * r4 = the entry point where thread starts + */ +_GLOBAL(book3e_start_thread) + LOAD_REG_IMMEDIATE(r5, MSR_KERNEL) + cmpi 0, r3, 0 + beq 10f + cmpi 0, r3, 1 + beq 11f + /* If the thread id is invalid, just exit. */ + b 13f +10: + MTTMR(TMRN_IMSR0, 5) + MTTMR(TMRN_INIA0, 4) + b 12f +11: + MTTMR(TMRN_IMSR1, 5) + MTTMR(TMRN_INIA1, 4) +12: + isync + li r6, 1 + sld r6, r6, r3 + mtspr SPRN_TENS, r6 +13: + blr + +/* + * stop a thread in the same core + * input parameter: + * r3 = the thread physical id + */ +_GLOBAL(book3e_stop_thread) + cmpi 0, r3, 0 + beq 10f + cmpi 0, r3, 1 + beq 10f + /* If the thread id is invalid, just exit. */ + b 13f +10: + li r4, 1 + sld r4, r4, r3 + mtspr SPRN_TENC, r4 +13: + blr + _GLOBAL(fsl_secondary_thread_init) mfspr r4,SPRN_BUCSR @@ -261,6 +321,44 @@ _GLOBAL(generic_secondary_smp_init) mr r3,r24 mr r4,r25 bl book3e_secondary_core_init + +/* + * After common core init has finished, check if the current thread is the + * one we wanted to boot. If not, start the specified thread and stop the + * current thread. + */ + LOAD_REG_ADDR(r4, booting_thread_hwid) + lwz r3, 0(r4) + li r5, INVALID_THREAD_HWID + cmpw r3, r5 + beq 20f + + /* + * The value of booting_thread_hwid has been stored in r3, + * so make it invalid. + */ + stw r5, 0(r4) + + /* + * Get the current thread id and check if it is the one we wanted. + * If not, start the one specified in booting_thread_hwid and stop + * the current thread. + */ + mfspr r8, SPRN_TIR + cmpw r3, r8 + beq 20f + + /* start the specified thread */ + LOAD_REG_ADDR(r5, fsl_secondary_thread_init) + ld r4, 0(r5) + bl book3e_start_thread + + /* stop the current thread */ + mr r3, r8 + bl book3e_stop_thread +10: + b 10b +20: #endif generic_secondary_common_init: diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index 78c1eba4c04a..80c69472314e 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -329,7 +329,7 @@ InstructionTLBMiss: /* If we are faulting a kernel address, we have to use the * kernel page tables. */ -#ifdef CONFIG_MODULES +#if defined(CONFIG_MODULES) || defined (CONFIG_DEBUG_PAGEALLOC) /* Only modules will cause ITLB Misses as we always * pin the first 8MB of kernel memory */ mfspr r11, SPRN_SRR0 /* Get effective address of fault */ @@ -385,27 +385,26 @@ InstructionTLBMiss: . = 0x1200 DataStoreTLBMiss: -#ifdef CONFIG_8xx_CPU6 mtspr SPRN_SPRG_SCRATCH2, r3 -#endif EXCEPTION_PROLOG_0 - mfcr r10 + mfcr r3 /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - mfspr r11, SPRN_MD_EPN - IS_KERNEL(r11, r11) + mfspr r10, SPRN_MD_EPN + IS_KERNEL(r11, r10) mfspr r11, SPRN_M_TW /* Get level 1 table */ BRANCH_UNLESS_KERNEL(3f) lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha 3: - mtcr r10 - mfspr r10, SPRN_MD_EPN /* Insert level 1 index */ rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29 lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11) /* Get the level 1 entry */ + mtcr r11 + bt- 28,DTLBMiss8M /* bit 28 = Large page (8M) */ + mtcr r3 /* We have a pte table, so load fetch the pte from the table. */ @@ -453,13 +452,34 @@ DataStoreTLBMiss: MTSPR_CPU6(SPRN_MD_RPN, r10, r3) /* Update TLB entry */ /* Restore registers */ -#ifdef CONFIG_8xx_CPU6 mfspr r3, SPRN_SPRG_SCRATCH2 + mtspr SPRN_DAR, r11 /* Tag DAR */ + EXCEPTION_EPILOG_0 + rfi + +DTLBMiss8M: + mtcr r3 + ori r11, r11, MD_SVALID + MTSPR_CPU6(SPRN_MD_TWC, r11, r3) +#ifdef CONFIG_PPC_16K_PAGES + /* + * In 16k pages mode, each PGD entry defines a 64M block. + * Here we select the 8M page within the block. + */ + rlwimi r11, r10, 0, 0x03800000 #endif + rlwinm r10, r11, 0, 0xff800000 + ori r10, r10, 0xf0 | MD_SPS16K | _PAGE_SHARED | _PAGE_DIRTY | \ + _PAGE_PRESENT + MTSPR_CPU6(SPRN_MD_RPN, r10, r3) /* Update TLB entry */ + + li r11, RPN_PATTERN + mfspr r3, SPRN_SPRG_SCRATCH2 mtspr SPRN_DAR, r11 /* Tag DAR */ EXCEPTION_EPILOG_0 rfi + /* This is an instruction TLB error on the MPC8xx. This could be due * to many reasons, such as executing guarded memory or illegal instruction * addresses. There is nothing to do but handle a big time error fault. @@ -537,13 +557,15 @@ FixupDAR:/* Entry point for dcbx workaround. */ /* Insert level 1 index */ 3: rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29 lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11) /* Get the level 1 entry */ + mtcr r11 + bt 28,200f /* bit 28 = Large page (8M) */ rlwinm r11, r11,0,0,19 /* Extract page descriptor page address */ /* Insert level 2 index */ rlwimi r11, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29 lwz r11, 0(r11) /* Get the pte */ /* concat physical page address(r11) and page offset(r10) */ rlwimi r11, r10, 0, 32 - PAGE_SHIFT, 31 - lwz r11,0(r11) +201: lwz r11,0(r11) /* Check if it really is a dcbx instruction. */ /* dcbt and dcbtst does not generate DTLB Misses/Errors, * no need to include them here */ @@ -562,6 +584,10 @@ FixupDAR:/* Entry point for dcbx workaround. */ 141: mfspr r10,SPRN_SPRG_SCRATCH2 b DARFixed /* Nope, go back to normal TLB processing */ + /* concat physical page address(r11) and page offset(r10) */ +200: rlwimi r11, r10, 0, 32 - (PAGE_SHIFT << 1), 31 + b 201b + 144: mfspr r10, SPRN_DSISR rlwinm r10, r10,0,7,5 /* Clear store bit for buggy dcbst insn */ mtspr SPRN_DSISR, r10 @@ -857,68 +883,6 @@ initial_mmu: /* - * Set up to use a given MMU context. - * r3 is context number, r4 is PGD pointer. - * - * We place the physical address of the new task page directory loaded - * into the MMU base register, and set the ASID compare register with - * the new "context." - */ -_GLOBAL(set_context) - -#ifdef CONFIG_BDI_SWITCH - /* Context switch the PTE pointer for the Abatron BDI2000. - * The PGDIR is passed as second argument. - */ - lis r5, KERNELBASE@h - lwz r5, 0xf0(r5) - stw r4, 0x4(r5) -#endif - - /* Register M_TW will contain base address of level 1 table minus the - * lower part of the kernel PGDIR base address, so that all accesses to - * level 1 table are done relative to lower part of kernel PGDIR base - * address. - */ - li r5, (swapper_pg_dir-PAGE_OFFSET)@l - sub r4, r4, r5 - tophys (r4, r4) -#ifdef CONFIG_8xx_CPU6 - lis r6, cpu6_errata_word@h - ori r6, r6, cpu6_errata_word@l - li r7, 0x3f80 - stw r7, 12(r6) - lwz r7, 12(r6) -#endif - mtspr SPRN_M_TW, r4 /* Update pointeur to level 1 table */ -#ifdef CONFIG_8xx_CPU6 - li r7, 0x3380 - stw r7, 12(r6) - lwz r7, 12(r6) -#endif - mtspr SPRN_M_CASID, r3 /* Update context */ - SYNC - blr - -#ifdef CONFIG_8xx_CPU6 -/* It's here because it is unique to the 8xx. - * It is important we get called with interrupts disabled. I used to - * do that, but it appears that all code that calls this already had - * interrupt disabled. - */ - .globl set_dec_cpu6 -set_dec_cpu6: - lis r7, cpu6_errata_word@h - ori r7, r7, cpu6_errata_word@l - li r4, 0x2c00 - stw r4, 8(r7) - lwz r4, 8(r7) - mtspr 22, r3 /* Update Decrementer */ - SYNC - blr -#endif - -/* * We put a few things here that have to be page-aligned. * This stuff goes at the beginning of the data segment, * which is page-aligned. diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index f705171b924b..3bfa3150911f 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -1037,80 +1037,6 @@ _GLOBAL(set_context) isync /* Force context change */ blr -_GLOBAL(flush_dcache_L1) - mfspr r3,SPRN_L1CFG0 - - rlwinm r5,r3,9,3 /* Extract cache block size */ - twlgti r5,1 /* Only 32 and 64 byte cache blocks - * are currently defined. - */ - li r4,32 - subfic r6,r5,2 /* r6 = log2(1KiB / cache block size) - - * log2(number of ways) - */ - slw r5,r4,r5 /* r5 = cache block size */ - - rlwinm r7,r3,0,0xff /* Extract number of KiB in the cache */ - mulli r7,r7,13 /* An 8-way cache will require 13 - * loads per set. - */ - slw r7,r7,r6 - - /* save off HID0 and set DCFA */ - mfspr r8,SPRN_HID0 - ori r9,r8,HID0_DCFA@l - mtspr SPRN_HID0,r9 - isync - - lis r4,KERNELBASE@h - mtctr r7 - -1: lwz r3,0(r4) /* Load... */ - add r4,r4,r5 - bdnz 1b - - msync - lis r4,KERNELBASE@h - mtctr r7 - -1: dcbf 0,r4 /* ...and flush. */ - add r4,r4,r5 - bdnz 1b - - /* restore HID0 */ - mtspr SPRN_HID0,r8 - isync - - blr - -/* Flush L1 d-cache, invalidate and disable d-cache and i-cache */ -_GLOBAL(__flush_disable_L1) - mflr r10 - bl flush_dcache_L1 /* Flush L1 d-cache */ - mtlr r10 - - mfspr r4, SPRN_L1CSR0 /* Invalidate and disable d-cache */ - li r5, 2 - rlwimi r4, r5, 0, 3 - - msync - isync - mtspr SPRN_L1CSR0, r4 - isync - -1: mfspr r4, SPRN_L1CSR0 /* Wait for the invalidate to finish */ - andi. r4, r4, 2 - bne 1b - - mfspr r4, SPRN_L1CSR1 /* Invalidate and disable i-cache */ - li r5, 2 - rlwimi r4, r5, 0, 3 - - mtspr SPRN_L1CSR1, r4 - isync - - blr - #ifdef CONFIG_SMP /* When we get here, r24 needs to hold the CPU # */ .globl __secondary_start diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S index cf4fb5429cf1..470ceebd2d23 100644 --- a/arch/powerpc/kernel/idle_power7.S +++ b/arch/powerpc/kernel/idle_power7.S @@ -19,7 +19,7 @@ #include <asm/kvm_book3s_asm.h> #include <asm/opal.h> #include <asm/cpuidle.h> -#include <asm/mmu-hash64.h> +#include <asm/book3s/64/mmu-hash.h> #undef DEBUG diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index e77c3ccf8dcf..dbf098121ce6 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -445,7 +445,11 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, * Global data */ struct kgdb_arch arch_kgdb_ops = { +#ifdef __LITTLE_ENDIAN__ + .gdb_bpt_instr = {0x08, 0x10, 0x82, 0x7d}, +#else .gdb_bpt_instr = {0x7d, 0x82, 0x10, 0x08}, +#endif }; static int kgdb_not_implemented(struct pt_regs *regs) diff --git a/arch/powerpc/kernel/mce_power.c b/arch/powerpc/kernel/mce_power.c index 2c647b1e62e4..ee62b197502d 100644 --- a/arch/powerpc/kernel/mce_power.c +++ b/arch/powerpc/kernel/mce_power.c @@ -54,8 +54,8 @@ static void flush_tlb_206(unsigned int num_sets, unsigned int action) } /* - * Generic routine to flush TLB on power7. This routine is used as - * flush_tlb hook in cpu_spec for Power7 processor. + * Generic routines to flush TLB on POWER processors. These routines + * are used as flush_tlb hook in the cpu_spec. * * action => TLB_INVAL_SCOPE_GLOBAL: Invalidate all TLBs. * TLB_INVAL_SCOPE_LPID: Invalidate TLB for current LPID. @@ -65,18 +65,17 @@ void __flush_tlb_power7(unsigned int action) flush_tlb_206(POWER7_TLB_SETS, action); } -/* - * Generic routine to flush TLB on power8. This routine is used as - * flush_tlb hook in cpu_spec for power8 processor. - * - * action => TLB_INVAL_SCOPE_GLOBAL: Invalidate all TLBs. - * TLB_INVAL_SCOPE_LPID: Invalidate TLB for current LPID. - */ void __flush_tlb_power8(unsigned int action) { flush_tlb_206(POWER8_TLB_SETS, action); } +void __flush_tlb_power9(unsigned int action) +{ + flush_tlb_206(POWER9_TLB_SETS_HASH, action); +} + + /* flush SLBs and reload */ static void flush_and_reload_slb(void) { diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index be8edd67f05b..bf5160fbf9d8 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -91,17 +91,16 @@ _GLOBAL(mulhdu) addc r7,r0,r7 addze r4,r4 1: beqlr cr1 /* all done if high part of A is 0 */ - mr r10,r3 mullw r9,r3,r5 - mulhwu r3,r3,r5 + mulhwu r10,r3,r5 beq 2f - mullw r0,r10,r6 - mulhwu r8,r10,r6 + mullw r0,r3,r6 + mulhwu r8,r3,r6 addc r7,r0,r7 adde r4,r4,r8 - addze r3,r3 + addze r10,r10 2: addc r4,r4,r9 - addze r3,r3 + addze r3,r10 blr /* @@ -296,12 +295,9 @@ _GLOBAL(real_writeb) * Flush instruction cache. * This is a no-op on the 601. */ +#ifndef CONFIG_PPC_8xx _GLOBAL(flush_instruction_cache) -#if defined(CONFIG_8xx) - isync - lis r5, IDC_INVALL@h - mtspr SPRN_IC_CST, r5 -#elif defined(CONFIG_4xx) +#if defined(CONFIG_4xx) #ifdef CONFIG_403GCX li r3, 512 mtctr r3 @@ -334,9 +330,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_UNIFIED_ID_CACHE) mfspr r3,SPRN_HID0 ori r3,r3,HID0_ICFI mtspr SPRN_HID0,r3 -#endif /* CONFIG_8xx/4xx */ +#endif /* CONFIG_4xx */ isync blr +#endif /* CONFIG_PPC_8xx */ /* * Write any modified data cache blocks out to memory @@ -350,10 +347,9 @@ BEGIN_FTR_SECTION PURGE_PREFETCHED_INS blr /* for 601, do nothing */ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) - li r5,L1_CACHE_BYTES-1 - andc r3,r3,r5 + rlwinm r3,r3,0,0,31 - L1_CACHE_SHIFT subf r4,r3,r4 - add r4,r4,r5 + addi r4,r4,L1_CACHE_BYTES - 1 srwi. r4,r4,L1_CACHE_SHIFT beqlr mtctr r4 @@ -377,71 +373,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) isync blr /* - * Write any modified data cache blocks out to memory. - * Does not invalidate the corresponding cache lines (especially for - * any corresponding instruction cache). - * - * clean_dcache_range(unsigned long start, unsigned long stop) - */ -_GLOBAL(clean_dcache_range) - li r5,L1_CACHE_BYTES-1 - andc r3,r3,r5 - subf r4,r3,r4 - add r4,r4,r5 - srwi. r4,r4,L1_CACHE_SHIFT - beqlr - mtctr r4 - -1: dcbst 0,r3 - addi r3,r3,L1_CACHE_BYTES - bdnz 1b - sync /* wait for dcbst's to get to ram */ - blr - -/* - * Write any modified data cache blocks out to memory and invalidate them. - * Does not invalidate the corresponding instruction cache blocks. - * - * flush_dcache_range(unsigned long start, unsigned long stop) - */ -_GLOBAL(flush_dcache_range) - li r5,L1_CACHE_BYTES-1 - andc r3,r3,r5 - subf r4,r3,r4 - add r4,r4,r5 - srwi. r4,r4,L1_CACHE_SHIFT - beqlr - mtctr r4 - -1: dcbf 0,r3 - addi r3,r3,L1_CACHE_BYTES - bdnz 1b - sync /* wait for dcbst's to get to ram */ - blr - -/* - * Like above, but invalidate the D-cache. This is used by the 8xx - * to invalidate the cache so the PPC core doesn't get stale data - * from the CPM (no cache snooping here :-). - * - * invalidate_dcache_range(unsigned long start, unsigned long stop) - */ -_GLOBAL(invalidate_dcache_range) - li r5,L1_CACHE_BYTES-1 - andc r3,r3,r5 - subf r4,r3,r4 - add r4,r4,r5 - srwi. r4,r4,L1_CACHE_SHIFT - beqlr - mtctr r4 - -1: dcbi 0,r3 - addi r3,r3,L1_CACHE_BYTES - bdnz 1b - sync /* wait for dcbi's to get to ram */ - blr - -/* * Flush a particular page from the data cache to RAM. * Note: this is necessary because the instruction cache does *not* * snoop from the data cache. @@ -519,22 +450,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) #endif /* CONFIG_BOOKE */ /* - * Clear pages using the dcbz instruction, which doesn't cause any - * memory traffic (except to write out any cache lines which get - * displaced). This only works on cacheable memory. - * - * void clear_pages(void *page, int order) ; - */ -_GLOBAL(clear_pages) - li r0,PAGE_SIZE/L1_CACHE_BYTES - slw r0,r0,r4 - mtctr r0 -1: dcbz 0,r3 - addi r3,r3,L1_CACHE_BYTES - bdnz 1b - blr - -/* * Copy a whole page. We use the dcbz instruction on the destination * to reduce memory traffic (it eliminates the unnecessary reads of * the destination into cache). This requires that the destination diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c index 9547381b631a..d1f1b35bf0c7 100644 --- a/arch/powerpc/kernel/module.c +++ b/arch/powerpc/kernel/module.c @@ -47,6 +47,11 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *me) { const Elf_Shdr *sect; + int rc; + + rc = module_finalize_ftrace(me, sechdrs); + if (rc) + return rc; /* Apply feature fixups */ sect = find_section(hdr, sechdrs, "__ftr_fixup"); diff --git a/arch/powerpc/kernel/module_32.c b/arch/powerpc/kernel/module_32.c index 2c01665eb410..5a7a78f12562 100644 --- a/arch/powerpc/kernel/module_32.c +++ b/arch/powerpc/kernel/module_32.c @@ -181,7 +181,7 @@ static inline int entry_matches(struct ppc_plt_entry *entry, Elf32_Addr val) /* Set up a trampoline in the PLT to bounce us to the distant function */ static uint32_t do_plt_call(void *location, Elf32_Addr val, - Elf32_Shdr *sechdrs, + const Elf32_Shdr *sechdrs, struct module *mod) { struct ppc_plt_entry *entry; @@ -294,11 +294,19 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, return -ENOEXEC; } } + + return 0; +} + #ifdef CONFIG_DYNAMIC_FTRACE - module->arch.tramp = - do_plt_call(module->core_layout.base, - (unsigned long)ftrace_caller, - sechdrs, module); -#endif +int module_finalize_ftrace(struct module *module, const Elf_Shdr *sechdrs) +{ + module->arch.tramp = do_plt_call(module->core_layout.base, + (unsigned long)ftrace_caller, + sechdrs, module); + if (!module->arch.tramp) + return -ENOENT; + return 0; } +#endif diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c index 08b7a40de5f8..9ce9a25f58b5 100644 --- a/arch/powerpc/kernel/module_64.c +++ b/arch/powerpc/kernel/module_64.c @@ -31,6 +31,7 @@ #include <asm/code-patching.h> #include <linux/sort.h> #include <asm/setup.h> +#include <asm/sections.h> /* FIXME: We don't do .init separately. To do this, we'd need to have a separate r2 value in the init and core section, and stub between @@ -41,7 +42,6 @@ --RR. */ #if defined(_CALL_ELF) && _CALL_ELF == 2 -#define R2_STACK_OFFSET 24 /* An address is simply the address of the function. */ typedef unsigned long func_desc_t; @@ -73,7 +73,6 @@ static unsigned int local_entry_offset(const Elf64_Sym *sym) return PPC64_LOCAL_ENTRY_OFFSET(sym->st_other); } #else -#define R2_STACK_OFFSET 40 /* An address is address of the OPD entry, which contains address of fn. */ typedef struct ppc64_opd_entry func_desc_t; @@ -96,6 +95,8 @@ static unsigned int local_entry_offset(const Elf64_Sym *sym) } #endif +#define STUB_MAGIC 0x73747562 /* stub */ + /* Like PPC32, we need little trampolines to do > 24-bit jumps (into the kernel itself). But on PPC64, these need to be used for every jump, actually, to reset r2 (TOC+0x8000). */ @@ -105,7 +106,8 @@ struct ppc64_stub_entry * need 6 instructions on ABIv2 but we always allocate 7 so * so we don't have to modify the trampoline load instruction. */ u32 jump[7]; - u32 unused; + /* Used by ftrace to identify stubs */ + u32 magic; /* Data for the above code */ func_desc_t funcdata; }; @@ -139,70 +141,39 @@ static u32 ppc64_stub_insns[] = { }; #ifdef CONFIG_DYNAMIC_FTRACE - -static u32 ppc64_stub_mask[] = { - 0xffff0000, - 0xffff0000, - 0xffffffff, - 0xffffffff, -#if !defined(_CALL_ELF) || _CALL_ELF != 2 - 0xffffffff, -#endif - 0xffffffff, - 0xffffffff -}; - -bool is_module_trampoline(u32 *p) +int module_trampoline_target(struct module *mod, unsigned long addr, + unsigned long *target) { - unsigned int i; - u32 insns[ARRAY_SIZE(ppc64_stub_insns)]; - - BUILD_BUG_ON(sizeof(ppc64_stub_insns) != sizeof(ppc64_stub_mask)); + struct ppc64_stub_entry *stub; + func_desc_t funcdata; + u32 magic; - if (probe_kernel_read(insns, p, sizeof(insns))) + if (!within_module_core(addr, mod)) { + pr_err("%s: stub %lx not in module %s\n", __func__, addr, mod->name); return -EFAULT; - - for (i = 0; i < ARRAY_SIZE(ppc64_stub_insns); i++) { - u32 insna = insns[i]; - u32 insnb = ppc64_stub_insns[i]; - u32 mask = ppc64_stub_mask[i]; - - if ((insna & mask) != (insnb & mask)) - return false; } - return true; -} - -int module_trampoline_target(struct module *mod, u32 *trampoline, - unsigned long *target) -{ - u32 buf[2]; - u16 upper, lower; - long offset; - void *toc_entry; + stub = (struct ppc64_stub_entry *)addr; - if (probe_kernel_read(buf, trampoline, sizeof(buf))) + if (probe_kernel_read(&magic, &stub->magic, sizeof(magic))) { + pr_err("%s: fault reading magic for stub %lx for %s\n", __func__, addr, mod->name); return -EFAULT; + } - upper = buf[0] & 0xffff; - lower = buf[1] & 0xffff; - - /* perform the addis/addi, both signed */ - offset = ((short)upper << 16) + (short)lower; + if (magic != STUB_MAGIC) { + pr_err("%s: bad magic for stub %lx for %s\n", __func__, addr, mod->name); + return -EFAULT; + } - /* - * Now get the address this trampoline jumps to. This - * is always 32 bytes into our trampoline stub. - */ - toc_entry = (void *)mod->arch.toc + offset + 32; + if (probe_kernel_read(&funcdata, &stub->funcdata, sizeof(funcdata))) { + pr_err("%s: fault reading funcdata for stub %lx for %s\n", __func__, addr, mod->name); + return -EFAULT; + } - if (probe_kernel_read(target, toc_entry, sizeof(*target))) - return -EFAULT; + *target = stub_func_addr(funcdata); return 0; } - #endif /* Count how many different 24-bit relocations (different symbol, @@ -413,7 +384,7 @@ int module_frob_arch_sections(Elf64_Ehdr *hdr, /* r2 is the TOC pointer: it actually points 0x8000 into the TOC (this gives the value maximum span in an instruction which uses a signed offset) */ -static inline unsigned long my_r2(Elf64_Shdr *sechdrs, struct module *me) +static inline unsigned long my_r2(const Elf64_Shdr *sechdrs, struct module *me) { return sechdrs[me->arch.toc_section].sh_addr + 0x8000; } @@ -426,7 +397,7 @@ static inline unsigned long my_r2(Elf64_Shdr *sechdrs, struct module *me) #define PPC_HA(v) PPC_HI ((v) + 0x8000) /* Patch stub to reference function and correct r2 value. */ -static inline int create_stub(Elf64_Shdr *sechdrs, +static inline int create_stub(const Elf64_Shdr *sechdrs, struct ppc64_stub_entry *entry, unsigned long addr, struct module *me) @@ -447,12 +418,14 @@ static inline int create_stub(Elf64_Shdr *sechdrs, entry->jump[0] |= PPC_HA(reladdr); entry->jump[1] |= PPC_LO(reladdr); entry->funcdata = func_desc(addr); + entry->magic = STUB_MAGIC; + return 1; } /* Create stub to jump to function described in this OPD/ptr: we need the stub to set up the TOC ptr (r2) for the function. */ -static unsigned long stub_for_addr(Elf64_Shdr *sechdrs, +static unsigned long stub_for_addr(const Elf64_Shdr *sechdrs, unsigned long addr, struct module *me) { @@ -476,17 +449,60 @@ static unsigned long stub_for_addr(Elf64_Shdr *sechdrs, return (unsigned long)&stubs[i]; } +#ifdef CC_USING_MPROFILE_KERNEL +static bool is_early_mcount_callsite(u32 *instruction) +{ + /* + * Check if this is one of the -mprofile-kernel sequences. + */ + if (instruction[-1] == PPC_INST_STD_LR && + instruction[-2] == PPC_INST_MFLR) + return true; + + if (instruction[-1] == PPC_INST_MFLR) + return true; + + return false; +} + +/* + * In case of _mcount calls, do not save the current callee's TOC (in r2) into + * the original caller's stack frame. If we did we would clobber the saved TOC + * value of the original caller. + */ +static void squash_toc_save_inst(const char *name, unsigned long addr) +{ + struct ppc64_stub_entry *stub = (struct ppc64_stub_entry *)addr; + + /* Only for calls to _mcount */ + if (strcmp("_mcount", name) != 0) + return; + + stub->jump[2] = PPC_INST_NOP; +} +#else +static void squash_toc_save_inst(const char *name, unsigned long addr) { } + +/* without -mprofile-kernel, mcount calls are never early */ +static bool is_early_mcount_callsite(u32 *instruction) +{ + return false; +} +#endif + /* We expect a noop next: if it is, replace it with instruction to restore r2. */ static int restore_r2(u32 *instruction, struct module *me) { if (*instruction != PPC_INST_NOP) { + if (is_early_mcount_callsite(instruction - 1)) + return 1; pr_err("%s: Expect noop after relocate, got %08x\n", me->name, *instruction); return 0; } /* ld r2,R2_STACK_OFFSET(r1) */ - *instruction = 0xe8410000 | R2_STACK_OFFSET; + *instruction = PPC_INST_LD_TOC; return 1; } @@ -611,6 +627,8 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, return -ENOENT; if (!restore_r2((u32 *)location + 1, me)) return -ENOEXEC; + + squash_toc_save_inst(strtab + sym->st_name, value); } else value += local_entry_offset(sym); @@ -693,12 +711,84 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, } } + return 0; +} + #ifdef CONFIG_DYNAMIC_FTRACE - me->arch.toc = my_r2(sechdrs, me); - me->arch.tramp = stub_for_addr(sechdrs, - (unsigned long)ftrace_caller, - me); + +#ifdef CC_USING_MPROFILE_KERNEL + +#define PACATOC offsetof(struct paca_struct, kernel_toc) + +/* + * For mprofile-kernel we use a special stub for ftrace_caller() because we + * can't rely on r2 containing this module's TOC when we enter the stub. + * + * That can happen if the function calling us didn't need to use the toc. In + * that case it won't have setup r2, and the r2 value will be either the + * kernel's toc, or possibly another modules toc. + * + * To deal with that this stub uses the kernel toc, which is always accessible + * via the paca (in r13). The target (ftrace_caller()) is responsible for + * saving and restoring the toc before returning. + */ +static unsigned long create_ftrace_stub(const Elf64_Shdr *sechdrs, struct module *me) +{ + struct ppc64_stub_entry *entry; + unsigned int i, num_stubs; + static u32 stub_insns[] = { + 0xe98d0000 | PACATOC, /* ld r12,PACATOC(r13) */ + 0x3d8c0000, /* addis r12,r12,<high> */ + 0x398c0000, /* addi r12,r12,<low> */ + 0x7d8903a6, /* mtctr r12 */ + 0x4e800420, /* bctr */ + }; + long reladdr; + + num_stubs = sechdrs[me->arch.stubs_section].sh_size / sizeof(*entry); + + /* Find the next available stub entry */ + entry = (void *)sechdrs[me->arch.stubs_section].sh_addr; + for (i = 0; i < num_stubs && stub_func_addr(entry->funcdata); i++, entry++); + + if (i >= num_stubs) { + pr_err("%s: Unable to find a free slot for ftrace stub.\n", me->name); + return 0; + } + + memcpy(entry->jump, stub_insns, sizeof(stub_insns)); + + /* Stub uses address relative to kernel toc (from the paca) */ + reladdr = (unsigned long)ftrace_caller - kernel_toc_addr(); + if (reladdr > 0x7FFFFFFF || reladdr < -(0x80000000L)) { + pr_err("%s: Address of ftrace_caller out of range of kernel_toc.\n", me->name); + return 0; + } + + entry->jump[1] |= PPC_HA(reladdr); + entry->jump[2] |= PPC_LO(reladdr); + + /* Eventhough we don't use funcdata in the stub, it's needed elsewhere. */ + entry->funcdata = func_desc((unsigned long)ftrace_caller); + entry->magic = STUB_MAGIC; + + return (unsigned long)entry; +} +#else +static unsigned long create_ftrace_stub(const Elf64_Shdr *sechdrs, struct module *me) +{ + return stub_for_addr(sechdrs, (unsigned long)ftrace_caller, me); +} #endif +int module_finalize_ftrace(struct module *mod, const Elf_Shdr *sechdrs) +{ + mod->arch.toc = my_r2(sechdrs, mod); + mod->arch.tramp = create_ftrace_stub(sechdrs, mod); + + if (!mod->arch.tramp) + return -ENOENT; + return 0; } +#endif diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index 01ea0edf0579..93dae296b6be 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -17,10 +17,6 @@ #include <asm/pgtable.h> #include <asm/kexec.h> -/* This symbol is provided by the linker - let it fill in the paca - * field correctly */ -extern unsigned long __toc_start; - #ifdef CONFIG_PPC_BOOK3S /* @@ -149,11 +145,6 @@ EXPORT_SYMBOL(paca); void __init initialise_paca(struct paca_struct *new_paca, int cpu) { - /* The TOC register (GPR2) points 32kB into the TOC, so that 64kB - * of the TOC can be addressed using a single machine instruction. - */ - unsigned long kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL; - #ifdef CONFIG_PPC_BOOK3S new_paca->lppaca_ptr = new_lppaca(cpu); #else @@ -161,7 +152,7 @@ void __init initialise_paca(struct paca_struct *new_paca, int cpu) #endif new_paca->lock_token = 0x8000; new_paca->paca_index = cpu; - new_paca->kernel_toc = kernel_toc; + new_paca->kernel_toc = kernel_toc_addr(); new_paca->kernelbase = (unsigned long) _stext; /* Only set MSR:IR/DR when MMU is initialized */ new_paca->kernel_msr = MSR_KERNEL & ~(MSR_IR | MSR_DR); diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c index 7f9ed0c1f6b9..59c436189f46 100644 --- a/arch/powerpc/kernel/pci-hotplug.c +++ b/arch/powerpc/kernel/pci-hotplug.c @@ -55,7 +55,7 @@ void pcibios_remove_pci_devices(struct pci_bus *bus) pr_debug("PCI: Removing devices on bus %04x:%02x\n", pci_domain_nr(bus), bus->number); - list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) { + list_for_each_entry_safe_reverse(dev, tmp, &bus->devices, bus_list) { pr_debug(" Removing %s...\n", pci_name(dev)); pci_stop_and_remove_bus_device(dev); } diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c index b3b4df91b792..38102cb9baa9 100644 --- a/arch/powerpc/kernel/pci_dn.c +++ b/arch/powerpc/kernel/pci_dn.c @@ -139,6 +139,7 @@ struct pci_dn *pci_get_pdn(struct pci_dev *pdev) #ifdef CONFIG_PCI_IOV static struct pci_dn *add_one_dev_pci_data(struct pci_dn *parent, struct pci_dev *pdev, + int vf_index, int busno, int devfn) { struct pci_dn *pdn; @@ -158,6 +159,7 @@ static struct pci_dn *add_one_dev_pci_data(struct pci_dn *parent, pdn->busno = busno; pdn->devfn = devfn; #ifdef CONFIG_PPC_POWERNV + pdn->vf_index = vf_index; pdn->pe_number = IODA_INVALID_PE; #endif INIT_LIST_HEAD(&pdn->child_list); @@ -179,6 +181,7 @@ struct pci_dn *add_dev_pci_data(struct pci_dev *pdev) { #ifdef CONFIG_PCI_IOV struct pci_dn *parent, *pdn; + struct eeh_dev *edev; int i; /* Only support IOV for now */ @@ -196,7 +199,7 @@ struct pci_dn *add_dev_pci_data(struct pci_dev *pdev) return NULL; for (i = 0; i < pci_sriov_get_totalvfs(pdev); i++) { - pdn = add_one_dev_pci_data(parent, NULL, + pdn = add_one_dev_pci_data(parent, NULL, i, pci_iov_virtfn_bus(pdev, i), pci_iov_virtfn_devfn(pdev, i)); if (!pdn) { @@ -204,6 +207,12 @@ struct pci_dn *add_dev_pci_data(struct pci_dev *pdev) __func__, i); return NULL; } + + /* Create the EEH device for the VF */ + eeh_dev_init(pdn, pci_bus_to_host(pdev->bus)); + edev = pdn_to_eeh_dev(pdn); + BUG_ON(!edev); + edev->physfn = pdev; } #endif /* CONFIG_PCI_IOV */ @@ -215,6 +224,7 @@ void remove_dev_pci_data(struct pci_dev *pdev) #ifdef CONFIG_PCI_IOV struct pci_dn *parent; struct pci_dn *pdn, *tmp; + struct eeh_dev *edev; int i; /* @@ -256,6 +266,13 @@ void remove_dev_pci_data(struct pci_dev *pdev) pdn->devfn != pci_iov_virtfn_devfn(pdev, i)) continue; + /* Release EEH device for the VF */ + edev = pdn_to_eeh_dev(pdn); + if (edev) { + pdn->edev = NULL; + kfree(edev); + } + if (!list_empty(&pdn->list)) list_del(&pdn->list); diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 41e1607e800c..9f01e28ecef3 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -6,7 +6,9 @@ #include <asm/cacheflush.h> #include <asm/epapr_hcalls.h> +#ifdef CONFIG_PPC64 EXPORT_SYMBOL(flush_dcache_range); +#endif EXPORT_SYMBOL(flush_icache_range); EXPORT_SYMBOL(empty_zero_page); @@ -28,10 +30,6 @@ EXPORT_SYMBOL(load_vr_state); EXPORT_SYMBOL(store_vr_state); #endif -#ifdef CONFIG_VSX -EXPORT_SYMBOL_GPL(__giveup_vsx); -#endif - #ifdef CONFIG_EPAPR_PARAVIRT EXPORT_SYMBOL(epapr_hypercall_start); #endif diff --git a/arch/powerpc/kernel/ppc_ksyms_32.c b/arch/powerpc/kernel/ppc_ksyms_32.c index 30ddd8a24eee..2bfaafe5be99 100644 --- a/arch/powerpc/kernel/ppc_ksyms_32.c +++ b/arch/powerpc/kernel/ppc_ksyms_32.c @@ -10,7 +10,6 @@ #include <asm/pgtable.h> #include <asm/dcr.h> -EXPORT_SYMBOL(clear_pages); EXPORT_SYMBOL(ISA_DMA_THRESHOLD); EXPORT_SYMBOL(DMA_MODE_READ); EXPORT_SYMBOL(DMA_MODE_WRITE); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 3c5736e52a14..612df305886b 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -133,6 +133,16 @@ void __msr_check_and_clear(unsigned long bits) EXPORT_SYMBOL(__msr_check_and_clear); #ifdef CONFIG_PPC_FPU +void __giveup_fpu(struct task_struct *tsk) +{ + save_fpu(tsk); + tsk->thread.regs->msr &= ~MSR_FP; +#ifdef CONFIG_VSX + if (cpu_has_feature(CPU_FTR_VSX)) + tsk->thread.regs->msr &= ~MSR_VSX; +#endif +} + void giveup_fpu(struct task_struct *tsk) { check_if_tm_restore_required(tsk); @@ -187,9 +197,32 @@ void enable_kernel_fp(void) } } EXPORT_SYMBOL(enable_kernel_fp); + +static int restore_fp(struct task_struct *tsk) { + if (tsk->thread.load_fp) { + load_fp_state(¤t->thread.fp_state); + current->thread.load_fp++; + return 1; + } + return 0; +} +#else +static int restore_fp(struct task_struct *tsk) { return 0; } #endif /* CONFIG_PPC_FPU */ #ifdef CONFIG_ALTIVEC +#define loadvec(thr) ((thr).load_vec) + +static void __giveup_altivec(struct task_struct *tsk) +{ + save_altivec(tsk); + tsk->thread.regs->msr &= ~MSR_VEC; +#ifdef CONFIG_VSX + if (cpu_has_feature(CPU_FTR_VSX)) + tsk->thread.regs->msr &= ~MSR_VSX; +#endif +} + void giveup_altivec(struct task_struct *tsk) { check_if_tm_restore_required(tsk); @@ -229,22 +262,49 @@ void flush_altivec_to_thread(struct task_struct *tsk) } } EXPORT_SYMBOL_GPL(flush_altivec_to_thread); + +static int restore_altivec(struct task_struct *tsk) +{ + if (cpu_has_feature(CPU_FTR_ALTIVEC) && tsk->thread.load_vec) { + load_vr_state(&tsk->thread.vr_state); + tsk->thread.used_vr = 1; + tsk->thread.load_vec++; + + return 1; + } + return 0; +} +#else +#define loadvec(thr) 0 +static inline int restore_altivec(struct task_struct *tsk) { return 0; } #endif /* CONFIG_ALTIVEC */ #ifdef CONFIG_VSX -void giveup_vsx(struct task_struct *tsk) +static void __giveup_vsx(struct task_struct *tsk) { - check_if_tm_restore_required(tsk); - - msr_check_and_set(MSR_FP|MSR_VEC|MSR_VSX); if (tsk->thread.regs->msr & MSR_FP) __giveup_fpu(tsk); if (tsk->thread.regs->msr & MSR_VEC) __giveup_altivec(tsk); + tsk->thread.regs->msr &= ~MSR_VSX; +} + +static void giveup_vsx(struct task_struct *tsk) +{ + check_if_tm_restore_required(tsk); + + msr_check_and_set(MSR_FP|MSR_VEC|MSR_VSX); __giveup_vsx(tsk); msr_check_and_clear(MSR_FP|MSR_VEC|MSR_VSX); } -EXPORT_SYMBOL(giveup_vsx); + +static void save_vsx(struct task_struct *tsk) +{ + if (tsk->thread.regs->msr & MSR_FP) + save_fpu(tsk); + if (tsk->thread.regs->msr & MSR_VEC) + save_altivec(tsk); +} void enable_kernel_vsx(void) { @@ -275,6 +335,19 @@ void flush_vsx_to_thread(struct task_struct *tsk) } } EXPORT_SYMBOL_GPL(flush_vsx_to_thread); + +static int restore_vsx(struct task_struct *tsk) +{ + if (cpu_has_feature(CPU_FTR_VSX)) { + tsk->thread.used_vsr = 1; + return 1; + } + + return 0; +} +#else +static inline int restore_vsx(struct task_struct *tsk) { return 0; } +static inline void save_vsx(struct task_struct *tsk) { } #endif /* CONFIG_VSX */ #ifdef CONFIG_SPE @@ -374,12 +447,76 @@ void giveup_all(struct task_struct *tsk) } EXPORT_SYMBOL(giveup_all); +void restore_math(struct pt_regs *regs) +{ + unsigned long msr; + + if (!current->thread.load_fp && !loadvec(current->thread)) + return; + + msr = regs->msr; + msr_check_and_set(msr_all_available); + + /* + * Only reload if the bit is not set in the user MSR, the bit BEING set + * indicates that the registers are hot + */ + if ((!(msr & MSR_FP)) && restore_fp(current)) + msr |= MSR_FP | current->thread.fpexc_mode; + + if ((!(msr & MSR_VEC)) && restore_altivec(current)) + msr |= MSR_VEC; + + if ((msr & (MSR_FP | MSR_VEC)) == (MSR_FP | MSR_VEC) && + restore_vsx(current)) { + msr |= MSR_VSX; + } + + msr_check_and_clear(msr_all_available); + + regs->msr = msr; +} + +void save_all(struct task_struct *tsk) +{ + unsigned long usermsr; + + if (!tsk->thread.regs) + return; + + usermsr = tsk->thread.regs->msr; + + if ((usermsr & msr_all_available) == 0) + return; + + msr_check_and_set(msr_all_available); + + /* + * Saving the way the register space is in hardware, save_vsx boils + * down to a save_fpu() and save_altivec() + */ + if (usermsr & MSR_VSX) { + save_vsx(tsk); + } else { + if (usermsr & MSR_FP) + save_fpu(tsk); + + if (usermsr & MSR_VEC) + save_altivec(tsk); + } + + if (usermsr & MSR_SPE) + __giveup_spe(tsk); + + msr_check_and_clear(msr_all_available); +} + void flush_all_to_thread(struct task_struct *tsk) { if (tsk->thread.regs) { preempt_disable(); BUG_ON(tsk != current); - giveup_all(tsk); + save_all(tsk); #ifdef CONFIG_SPE if (tsk->thread.regs->msr & MSR_SPE) @@ -832,17 +969,9 @@ void restore_tm_state(struct pt_regs *regs) msr_diff = current->thread.ckpt_regs.msr & ~regs->msr; msr_diff &= MSR_FP | MSR_VEC | MSR_VSX; - if (msr_diff & MSR_FP) { - msr_check_and_set(MSR_FP); - load_fp_state(¤t->thread.fp_state); - msr_check_and_clear(MSR_FP); - regs->msr |= current->thread.fpexc_mode; - } - if (msr_diff & MSR_VEC) { - msr_check_and_set(MSR_VEC); - load_vr_state(¤t->thread.vr_state); - msr_check_and_clear(MSR_VEC); - } + + restore_math(regs); + regs->msr |= msr_diff; } @@ -1006,6 +1135,10 @@ struct task_struct *__switch_to(struct task_struct *prev, batch = this_cpu_ptr(&ppc64_tlb_batch); batch->active = 1; } + + if (current_thread_info()->task->thread.regs) + restore_math(current_thread_info()->task->thread.regs); + #endif /* CONFIG_PPC_BOOK3S_64 */ return last; @@ -1307,6 +1440,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, f = ret_from_fork; } + childregs->msr &= ~(MSR_FP|MSR_VEC|MSR_VSX); sp -= STACK_FRAME_OVERHEAD; /* diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index cf8c7e4e0b21..cb64d6feb45a 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -1,7 +1,7 @@ /* * Common signal handling code for both 32 and 64 bits * - * Copyright (c) 2007 Benjamin Herrenschmidt, IBM Coproration + * Copyright (c) 2007 Benjamin Herrenschmidt, IBM Corporation * Extracted from signal_32.c and signal_64.c * * This file is subject to the terms and conditions of the GNU General @@ -178,7 +178,7 @@ unsigned long get_tm_stackpointer(struct pt_regs *regs) * need to use the stack pointer from the checkpointed state, rather * than the speculated state. This ensures that the signal context * (written tm suspended) will be written below the stack required for - * the rollback. The transaction is aborted becuase of the treclaim, + * the rollback. The transaction is aborted because of the treclaim, * so any memory written between the tbegin and the signal will be * rolled back anyway. * diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h index 51b274199dd9..be305c858e51 100644 --- a/arch/powerpc/kernel/signal.h +++ b/arch/powerpc/kernel/signal.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2007 Benjamin Herrenschmidt, IBM Coproration + * Copyright (c) 2007 Benjamin Herrenschmidt, IBM Corporation * Extracted from signal_32.c and signal_64.c * * This file is subject to the terms and conditions of the GNU General diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index b7dea05f0725..8cac1eb41466 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -445,7 +445,7 @@ void generic_cpu_die(unsigned int cpu) for (i = 0; i < 100; i++) { smp_rmb(); - if (per_cpu(cpu_state, cpu) == CPU_DEAD) + if (is_cpu_dead(cpu)) return; msleep(100); } @@ -472,6 +472,11 @@ int generic_check_cpu_restart(unsigned int cpu) return per_cpu(cpu_state, cpu) == CPU_UP_PREPARE; } +int is_cpu_dead(unsigned int cpu) +{ + return per_cpu(cpu_state, cpu) == CPU_DEAD; +} + static bool secondaries_inhibited(void) { return kvm_hv_mode_active(); diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 33c47fcc455a..9229ba63c370 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -1147,6 +1147,7 @@ void __kprobes program_check_exception(struct pt_regs *regs) goto bail; } if (reason & REASON_TRAP) { + unsigned long bugaddr; /* Debugger is first in line to stop recursive faults in * rcu_lock, notify_die, or atomic_notifier_call_chain */ if (debugger_bpt(regs)) @@ -1157,8 +1158,15 @@ void __kprobes program_check_exception(struct pt_regs *regs) == NOTIFY_STOP) goto bail; + bugaddr = regs->nip; + /* + * Fixup bugaddr for BUG_ON() in real mode + */ + if (!is_kernel_addr(bugaddr) && !(regs->msr & MSR_IR)) + bugaddr += PAGE_OFFSET; + if (!(regs->msr & MSR_PR) && /* not user-mode */ - report_bug(regs->nip, regs) == BUG_TRAP_TYPE_WARN) { + report_bug(bugaddr, regs) == BUG_TRAP_TYPE_WARN) { regs->nip += 4; goto bail; } @@ -1393,7 +1401,7 @@ void facility_unavailable_exception(struct pt_regs *regs) * is a read DSCR attempt through a mfspr instruction, we * just emulate the instruction instead. This code path will * always emulate all the mfspr instructions till the user - * has attempted atleast one mtspr instruction. This way it + * has attempted at least one mtspr instruction. This way it * preserves the same behaviour when the user is accessing * the DSCR through privilege level only SPR number (0x11) * which is emulated through illegal instruction exception. diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S index 162d0f714941..1c2e7a343bf5 100644 --- a/arch/powerpc/kernel/vector.S +++ b/arch/powerpc/kernel/vector.S @@ -91,6 +91,10 @@ _GLOBAL(load_up_altivec) oris r12,r12,MSR_VEC@h std r12,_MSR(r1) #endif + /* Don't care if r4 overflows, this is desired behaviour */ + lbz r4,THREAD_LOAD_VEC(r5) + addi r4,r4,1 + stb r4,THREAD_LOAD_VEC(r5) addi r6,r5,THREAD_VRSTATE li r4,1 li r10,VRSTATE_VSCR @@ -102,36 +106,20 @@ _GLOBAL(load_up_altivec) blr /* - * __giveup_altivec(tsk) - * Disable VMX for the task given as the argument, - * and save the vector registers in its thread_struct. + * save_altivec(tsk) + * Save the vector registers to its thread_struct */ -_GLOBAL(__giveup_altivec) +_GLOBAL(save_altivec) addi r3,r3,THREAD /* want THREAD of task */ PPC_LL r7,THREAD_VRSAVEAREA(r3) PPC_LL r5,PT_REGS(r3) PPC_LCMPI 0,r7,0 bne 2f addi r7,r3,THREAD_VRSTATE -2: PPC_LCMPI 0,r5,0 - SAVE_32VRS(0,r4,r7) +2: SAVE_32VRS(0,r4,r7) mfvscr v0 li r4,VRSTATE_VSCR stvx v0,r4,r7 - beq 1f - PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5) -#ifdef CONFIG_VSX -BEGIN_FTR_SECTION - lis r3,(MSR_VEC|MSR_VSX)@h -FTR_SECTION_ELSE - lis r3,MSR_VEC@h -ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX) -#else - lis r3,MSR_VEC@h -#endif - andc r4,r4,r3 /* disable FP for previous task */ - PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: blr #ifdef CONFIG_VSX @@ -163,23 +151,6 @@ _GLOBAL(load_up_vsx) std r12,_MSR(r1) b fast_exception_return -/* - * __giveup_vsx(tsk) - * Disable VSX for the task given as the argument. - * Does NOT save vsx registers. - */ -_GLOBAL(__giveup_vsx) - addi r3,r3,THREAD /* want THREAD of task */ - ld r5,PT_REGS(r3) - cmpdi 0,r5,0 - beq 1f - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r3,MSR_VSX@h - andc r4,r4,r3 /* disable VSX for previous task */ - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: - blr - #endif /* CONFIG_VSX */ diff --git a/arch/powerpc/kvm/book3s_32_mmu_host.c b/arch/powerpc/kvm/book3s_32_mmu_host.c index 55c4d51ea3e2..999106991a76 100644 --- a/arch/powerpc/kvm/book3s_32_mmu_host.c +++ b/arch/powerpc/kvm/book3s_32_mmu_host.c @@ -22,7 +22,7 @@ #include <asm/kvm_ppc.h> #include <asm/kvm_book3s.h> -#include <asm/mmu-hash32.h> +#include <asm/book3s/32/mmu-hash.h> #include <asm/machdep.h> #include <asm/mmu_context.h> #include <asm/hw_irq.h> diff --git a/arch/powerpc/kvm/book3s_64_mmu.c b/arch/powerpc/kvm/book3s_64_mmu.c index 9bf7031a67ff..b9131aa1aedf 100644 --- a/arch/powerpc/kvm/book3s_64_mmu.c +++ b/arch/powerpc/kvm/book3s_64_mmu.c @@ -26,7 +26,7 @@ #include <asm/tlbflush.h> #include <asm/kvm_ppc.h> #include <asm/kvm_book3s.h> -#include <asm/mmu-hash64.h> +#include <asm/book3s/64/mmu-hash.h> /* #define DEBUG_MMU */ diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c index 913cd2198fa6..114edace6cdd 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_host.c +++ b/arch/powerpc/kvm/book3s_64_mmu_host.c @@ -23,7 +23,7 @@ #include <asm/kvm_ppc.h> #include <asm/kvm_book3s.h> -#include <asm/mmu-hash64.h> +#include <asm/book3s/64/mmu-hash.h> #include <asm/machdep.h> #include <asm/mmu_context.h> #include <asm/hw_irq.h> diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c index fb37290a57b4..c7b78d8336b2 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_hv.c +++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c @@ -32,7 +32,7 @@ #include <asm/tlbflush.h> #include <asm/kvm_ppc.h> #include <asm/kvm_book3s.h> -#include <asm/mmu-hash64.h> +#include <asm/book3s/64/mmu-hash.h> #include <asm/hvcall.h> #include <asm/synch.h> #include <asm/ppc-opcode.h> diff --git a/arch/powerpc/kvm/book3s_64_vio.c b/arch/powerpc/kvm/book3s_64_vio.c index 2c2d1030843a..82970042295e 100644 --- a/arch/powerpc/kvm/book3s_64_vio.c +++ b/arch/powerpc/kvm/book3s_64_vio.c @@ -31,7 +31,7 @@ #include <asm/tlbflush.h> #include <asm/kvm_ppc.h> #include <asm/kvm_book3s.h> -#include <asm/mmu-hash64.h> +#include <asm/book3s/64/mmu-hash.h> #include <asm/hvcall.h> #include <asm/synch.h> #include <asm/ppc-opcode.h> diff --git a/arch/powerpc/kvm/book3s_64_vio_hv.c b/arch/powerpc/kvm/book3s_64_vio_hv.c index 44be73e6aa26..f88b859af53b 100644 --- a/arch/powerpc/kvm/book3s_64_vio_hv.c +++ b/arch/powerpc/kvm/book3s_64_vio_hv.c @@ -30,7 +30,7 @@ #include <asm/tlbflush.h> #include <asm/kvm_ppc.h> #include <asm/kvm_book3s.h> -#include <asm/mmu-hash64.h> +#include <asm/book3s/64/mmu-hash.h> #include <asm/mmu_context.h> #include <asm/hvcall.h> #include <asm/synch.h> diff --git a/arch/powerpc/kvm/book3s_hv_rm_mmu.c b/arch/powerpc/kvm/book3s_hv_rm_mmu.c index 91700518bbf3..4cb8db05f3e5 100644 --- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c +++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c @@ -17,7 +17,7 @@ #include <asm/tlbflush.h> #include <asm/kvm_ppc.h> #include <asm/kvm_book3s.h> -#include <asm/mmu-hash64.h> +#include <asm/book3s/64/mmu-hash.h> #include <asm/hvcall.h> #include <asm/synch.h> #include <asm/ppc-opcode.h> diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index 85b32f16fa74..62ea3c6acdee 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -27,7 +27,7 @@ #include <asm/asm-offsets.h> #include <asm/exception-64s.h> #include <asm/kvm_book3s_asm.h> -#include <asm/mmu-hash64.h> +#include <asm/book3s/64/mmu-hash.h> #include <asm/tm.h> #define VCPU_GPRS_TM(reg) (((reg) * ULONG_SIZE) + VCPU_GPR_TM) diff --git a/arch/powerpc/kvm/book3s_xics.c b/arch/powerpc/kvm/book3s_xics.c index 905e94a1370f..46871d554057 100644 --- a/arch/powerpc/kvm/book3s_xics.c +++ b/arch/powerpc/kvm/book3s_xics.c @@ -432,7 +432,7 @@ static void icp_deliver_irq(struct kvmppc_xics *xics, struct kvmppc_icp *icp, * the whole masked_pending business which is about not * losing interrupts that occur while masked. * - * I don't differenciate normal deliveries and resends, this + * I don't differentiate normal deliveries and resends, this * implementation will differ from PAPR and not lose such * interrupts. */ diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c index 778ef86e187e..4d66f44a1657 100644 --- a/arch/powerpc/kvm/booke.c +++ b/arch/powerpc/kvm/booke.c @@ -992,7 +992,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu, kvmppc_restart_interrupt(vcpu, exit_nr); /* - * get last instruction before beeing preempted + * get last instruction before being preempted * TODO: for e6500 check also BOOKE_INTERRUPT_LRAT_ERROR & ESR_DATA */ switch (exit_nr) { diff --git a/arch/powerpc/kvm/e500mc.c b/arch/powerpc/kvm/e500mc.c index cda695de8aa7..f48a0c22e8f9 100644 --- a/arch/powerpc/kvm/e500mc.c +++ b/arch/powerpc/kvm/e500mc.c @@ -182,7 +182,7 @@ int kvmppc_core_check_processor_compat(void) r = 0; #ifdef CONFIG_ALTIVEC /* - * Since guests have the priviledge to enable AltiVec, we need AltiVec + * Since guests have the privilege to enable AltiVec, we need AltiVec * support in the host to save/restore their context. * Don't use CPU_FTR_ALTIVEC to identify cores with AltiVec unit * because it's cleared in the absence of CONFIG_ALTIVEC! diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index a47e14277fd8..ba21be15310f 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -6,8 +6,8 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC) -CFLAGS_REMOVE_code-patching.o = -pg -CFLAGS_REMOVE_feature-fixups.o = -pg +CFLAGS_REMOVE_code-patching.o = $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_feature-fixups.o = $(CC_FLAGS_FTRACE) obj-y += string.o alloc.o crtsavres.o ppc_ksyms.o code-patching.o \ feature-fixups.o @@ -22,8 +22,7 @@ obj64-$(CONFIG_SMP) += locks.o obj64-$(CONFIG_ALTIVEC) += vmx-helper.o ifeq ($(CONFIG_GENERIC_CSUM),) -obj-y += checksum_$(CONFIG_WORD_SIZE).o -obj-$(CONFIG_PPC64) += checksum_wrappers_64.o +obj-y += checksum_$(CONFIG_WORD_SIZE).o checksum_wrappers.o endif obj-$(CONFIG_PPC_EMULATE_SSTEP) += sstep.o ldstfp.o diff --git a/arch/powerpc/lib/checksum_32.S b/arch/powerpc/lib/checksum_32.S index 6d67e057f15e..d90870a66b60 100644 --- a/arch/powerpc/lib/checksum_32.S +++ b/arch/powerpc/lib/checksum_32.S @@ -14,68 +14,59 @@ #include <linux/sys.h> #include <asm/processor.h> +#include <asm/cache.h> #include <asm/errno.h> #include <asm/ppc_asm.h> .text /* - * ip_fast_csum(buf, len) -- Optimized for IP header - * len is in words and is always >= 5. - */ -_GLOBAL(ip_fast_csum) - lwz r0,0(r3) - lwzu r5,4(r3) - addic. r4,r4,-2 - addc r0,r0,r5 - mtctr r4 - blelr- -1: lwzu r4,4(r3) - adde r0,r0,r4 - bdnz 1b - addze r0,r0 /* add in final carry */ - rlwinm r3,r0,16,0,31 /* fold two halves together */ - add r3,r0,r3 - not r3,r3 - srwi r3,r3,16 - blr - -/* * computes the checksum of a memory block at buff, length len, * and adds in "sum" (32-bit) * - * csum_partial(buff, len, sum) + * __csum_partial(buff, len, sum) */ -_GLOBAL(csum_partial) - addic r0,r5,0 +_GLOBAL(__csum_partial) subi r3,r3,4 - srwi. r6,r4,2 + srawi. r6,r4,2 /* Divide len by 4 and also clear carry */ beq 3f /* if we're doing < 4 bytes */ - andi. r5,r3,2 /* Align buffer to longword boundary */ + andi. r0,r3,2 /* Align buffer to longword boundary */ beq+ 1f - lhz r5,4(r3) /* do 2 bytes to get aligned */ - addi r3,r3,2 + lhz r0,4(r3) /* do 2 bytes to get aligned */ subi r4,r4,2 - addc r0,r0,r5 + addi r3,r3,2 srwi. r6,r4,2 /* # words to do */ + adde r5,r5,r0 beq 3f -1: mtctr r6 -2: lwzu r5,4(r3) /* the bdnz has zero overhead, so it should */ - adde r0,r0,r5 /* be unnecessary to unroll this loop */ +1: andi. r6,r6,3 /* Prepare to handle words 4 by 4 */ + beq 21f + mtctr r6 +2: lwzu r0,4(r3) + adde r5,r5,r0 bdnz 2b - andi. r4,r4,3 -3: cmpwi 0,r4,2 - blt+ 4f - lhz r5,4(r3) +21: srwi. r6,r4,4 /* # blocks of 4 words to do */ + beq 3f + mtctr r6 +22: lwz r0,4(r3) + lwz r6,8(r3) + lwz r7,12(r3) + lwzu r8,16(r3) + adde r5,r5,r0 + adde r5,r5,r6 + adde r5,r5,r7 + adde r5,r5,r8 + bdnz 22b +3: andi. r0,r4,2 + beq+ 4f + lhz r0,4(r3) addi r3,r3,2 - subi r4,r4,2 - adde r0,r0,r5 -4: cmpwi 0,r4,1 - bne+ 5f - lbz r5,4(r3) - slwi r5,r5,8 /* Upper byte of word */ - adde r0,r0,r5 -5: addze r3,r0 /* add in final carry */ + adde r5,r5,r0 +4: andi. r0,r4,1 + beq+ 5f + lbz r0,4(r3) + slwi r0,r0,8 /* Upper byte of word */ + adde r5,r5,r0 +5: addze r3,r5 /* add in final carry */ blr /* @@ -87,123 +78,220 @@ _GLOBAL(csum_partial) * * csum_partial_copy_generic(src, dst, len, sum, src_err, dst_err) */ +#define CSUM_COPY_16_BYTES_WITHEX(n) \ +8 ## n ## 0: \ + lwz r7,4(r4); \ +8 ## n ## 1: \ + lwz r8,8(r4); \ +8 ## n ## 2: \ + lwz r9,12(r4); \ +8 ## n ## 3: \ + lwzu r10,16(r4); \ +8 ## n ## 4: \ + stw r7,4(r6); \ + adde r12,r12,r7; \ +8 ## n ## 5: \ + stw r8,8(r6); \ + adde r12,r12,r8; \ +8 ## n ## 6: \ + stw r9,12(r6); \ + adde r12,r12,r9; \ +8 ## n ## 7: \ + stwu r10,16(r6); \ + adde r12,r12,r10 + +#define CSUM_COPY_16_BYTES_EXCODE(n) \ +.section __ex_table,"a"; \ + .align 2; \ + .long 8 ## n ## 0b,src_error; \ + .long 8 ## n ## 1b,src_error; \ + .long 8 ## n ## 2b,src_error; \ + .long 8 ## n ## 3b,src_error; \ + .long 8 ## n ## 4b,dst_error; \ + .long 8 ## n ## 5b,dst_error; \ + .long 8 ## n ## 6b,dst_error; \ + .long 8 ## n ## 7b,dst_error; \ + .text + + .text + .stabs "arch/powerpc/lib/",N_SO,0,0,0f + .stabs "checksum_32.S",N_SO,0,0,0f +0: + +CACHELINE_BYTES = L1_CACHE_BYTES +LG_CACHELINE_BYTES = L1_CACHE_SHIFT +CACHELINE_MASK = (L1_CACHE_BYTES-1) + _GLOBAL(csum_partial_copy_generic) - addic r0,r6,0 - subi r3,r3,4 - subi r4,r4,4 - srwi. r6,r5,2 - beq 3f /* if we're doing < 4 bytes */ - andi. r9,r4,2 /* Align dst to longword boundary */ - beq+ 1f -81: lhz r6,4(r3) /* do 2 bytes to get aligned */ - addi r3,r3,2 - subi r5,r5,2 -91: sth r6,4(r4) - addi r4,r4,2 - addc r0,r0,r6 - srwi. r6,r5,2 /* # words to do */ - beq 3f -1: srwi. r6,r5,4 /* # groups of 4 words to do */ - beq 10f - mtctr r6 -71: lwz r6,4(r3) -72: lwz r9,8(r3) -73: lwz r10,12(r3) -74: lwzu r11,16(r3) - adde r0,r0,r6 -75: stw r6,4(r4) - adde r0,r0,r9 -76: stw r9,8(r4) - adde r0,r0,r10 -77: stw r10,12(r4) - adde r0,r0,r11 -78: stwu r11,16(r4) - bdnz 71b -10: rlwinm. r6,r5,30,30,31 /* # words left to do */ - beq 13f - mtctr r6 -82: lwzu r9,4(r3) -92: stwu r9,4(r4) - adde r0,r0,r9 - bdnz 82b -13: andi. r5,r5,3 -3: cmpwi 0,r5,2 - blt+ 4f -83: lhz r6,4(r3) - addi r3,r3,2 - subi r5,r5,2 -93: sth r6,4(r4) + stwu r1,-16(r1) + stw r7,12(r1) + stw r8,8(r1) + + andi. r0,r4,1 /* is destination address even ? */ + cmplwi cr7,r0,0 + addic r12,r6,0 + addi r6,r4,-4 + neg r0,r4 + addi r4,r3,-4 + andi. r0,r0,CACHELINE_MASK /* # bytes to start of cache line */ + beq 58f + + cmplw 0,r5,r0 /* is this more than total to do? */ + blt 63f /* if not much to do */ + andi. r8,r0,3 /* get it word-aligned first */ + mtctr r8 + beq+ 61f + li r3,0 +70: lbz r9,4(r4) /* do some bytes */ + addi r4,r4,1 + slwi r3,r3,8 + rlwimi r3,r9,0,24,31 +71: stb r9,4(r6) + addi r6,r6,1 + bdnz 70b + adde r12,r12,r3 +61: subf r5,r0,r5 + srwi. r0,r0,2 + mtctr r0 + beq 58f +72: lwzu r9,4(r4) /* do some words */ + adde r12,r12,r9 +73: stwu r9,4(r6) + bdnz 72b + +58: srwi. r0,r5,LG_CACHELINE_BYTES /* # complete cachelines */ + clrlwi r5,r5,32-LG_CACHELINE_BYTES + li r11,4 + beq 63f + + /* Here we decide how far ahead to prefetch the source */ + li r3,4 + cmpwi r0,1 + li r7,0 + ble 114f + li r7,1 +#if MAX_COPY_PREFETCH > 1 + /* Heuristically, for large transfers we prefetch + MAX_COPY_PREFETCH cachelines ahead. For small transfers + we prefetch 1 cacheline ahead. */ + cmpwi r0,MAX_COPY_PREFETCH + ble 112f + li r7,MAX_COPY_PREFETCH +112: mtctr r7 +111: dcbt r3,r4 + addi r3,r3,CACHELINE_BYTES + bdnz 111b +#else + dcbt r3,r4 + addi r3,r3,CACHELINE_BYTES +#endif /* MAX_COPY_PREFETCH > 1 */ + +114: subf r8,r7,r0 + mr r0,r7 + mtctr r8 + +53: dcbt r3,r4 +54: dcbz r11,r6 +/* the main body of the cacheline loop */ + CSUM_COPY_16_BYTES_WITHEX(0) +#if L1_CACHE_BYTES >= 32 + CSUM_COPY_16_BYTES_WITHEX(1) +#if L1_CACHE_BYTES >= 64 + CSUM_COPY_16_BYTES_WITHEX(2) + CSUM_COPY_16_BYTES_WITHEX(3) +#if L1_CACHE_BYTES >= 128 + CSUM_COPY_16_BYTES_WITHEX(4) + CSUM_COPY_16_BYTES_WITHEX(5) + CSUM_COPY_16_BYTES_WITHEX(6) + CSUM_COPY_16_BYTES_WITHEX(7) +#endif +#endif +#endif + bdnz 53b + cmpwi r0,0 + li r3,4 + li r7,0 + bne 114b + +63: srwi. r0,r5,2 + mtctr r0 + beq 64f +30: lwzu r0,4(r4) + adde r12,r12,r0 +31: stwu r0,4(r6) + bdnz 30b + +64: andi. r0,r5,2 + beq+ 65f +40: lhz r0,4(r4) addi r4,r4,2 - adde r0,r0,r6 -4: cmpwi 0,r5,1 - bne+ 5f -84: lbz r6,4(r3) -94: stb r6,4(r4) - slwi r6,r6,8 /* Upper byte of word */ - adde r0,r0,r6 -5: addze r3,r0 /* add in final carry */ +41: sth r0,4(r6) + adde r12,r12,r0 + addi r6,r6,2 +65: andi. r0,r5,1 + beq+ 66f +50: lbz r0,4(r4) +51: stb r0,4(r6) + slwi r0,r0,8 + adde r12,r12,r0 +66: addze r3,r12 + addi r1,r1,16 + beqlr+ cr7 + rlwinm r3,r3,8,0,31 /* swap bytes for odd destination */ blr -/* These shouldn't go in the fixup section, since that would - cause the ex_table addresses to get out of order. */ - -src_error_4: - mfctr r6 /* update # bytes remaining from ctr */ - rlwimi r5,r6,4,0,27 - b 79f -src_error_1: - li r6,0 - subi r5,r5,2 -95: sth r6,4(r4) - addi r4,r4,2 -79: srwi. r6,r5,2 - beq 3f - mtctr r6 -src_error_2: - li r6,0 -96: stwu r6,4(r4) - bdnz 96b -3: andi. r5,r5,3 - beq src_error -src_error_3: - li r6,0 - mtctr r5 - addi r4,r4,3 -97: stbu r6,1(r4) - bdnz 97b +/* read fault */ src_error: - cmpwi 0,r7,0 - beq 1f - li r6,-EFAULT - stw r6,0(r7) -1: addze r3,r0 + lwz r7,12(r1) + addi r1,r1,16 + cmpwi cr0,r7,0 + beqlr + li r0,-EFAULT + stw r0,0(r7) blr - +/* write fault */ dst_error: - cmpwi 0,r8,0 - beq 1f - li r6,-EFAULT - stw r6,0(r8) -1: addze r3,r0 + lwz r8,8(r1) + addi r1,r1,16 + cmpwi cr0,r8,0 + beqlr + li r0,-EFAULT + stw r0,0(r8) blr -.section __ex_table,"a" - .long 81b,src_error_1 - .long 91b,dst_error - .long 71b,src_error_4 - .long 72b,src_error_4 - .long 73b,src_error_4 - .long 74b,src_error_4 - .long 75b,dst_error - .long 76b,dst_error - .long 77b,dst_error - .long 78b,dst_error - .long 82b,src_error_2 - .long 92b,dst_error - .long 83b,src_error_3 - .long 93b,dst_error - .long 84b,src_error_3 - .long 94b,dst_error - .long 95b,dst_error - .long 96b,dst_error - .long 97b,dst_error + .section __ex_table,"a" + .align 2 + .long 70b,src_error + .long 71b,dst_error + .long 72b,src_error + .long 73b,dst_error + .long 54b,dst_error + .text + +/* + * this stuff handles faults in the cacheline loop and branches to either + * src_error (if in read part) or dst_error (if in write part) + */ + CSUM_COPY_16_BYTES_EXCODE(0) +#if L1_CACHE_BYTES >= 32 + CSUM_COPY_16_BYTES_EXCODE(1) +#if L1_CACHE_BYTES >= 64 + CSUM_COPY_16_BYTES_EXCODE(2) + CSUM_COPY_16_BYTES_EXCODE(3) +#if L1_CACHE_BYTES >= 128 + CSUM_COPY_16_BYTES_EXCODE(4) + CSUM_COPY_16_BYTES_EXCODE(5) + CSUM_COPY_16_BYTES_EXCODE(6) + CSUM_COPY_16_BYTES_EXCODE(7) +#endif +#endif +#endif + + .section __ex_table,"a" + .align 2 + .long 30b,src_error + .long 31b,dst_error + .long 40b,src_error + .long 41b,dst_error + .long 50b,src_error + .long 51b,dst_error diff --git a/arch/powerpc/lib/checksum_64.S b/arch/powerpc/lib/checksum_64.S index f3ef35436612..8e6e51016cc5 100644 --- a/arch/powerpc/lib/checksum_64.S +++ b/arch/powerpc/lib/checksum_64.S @@ -18,39 +18,12 @@ #include <asm/ppc_asm.h> /* - * ip_fast_csum(r3=buf, r4=len) -- Optimized for IP header - * len is in words and is always >= 5. - * - * In practice len == 5, but this is not guaranteed. So this code does not - * attempt to use doubleword instructions. - */ -_GLOBAL(ip_fast_csum) - lwz r0,0(r3) - lwzu r5,4(r3) - addic. r4,r4,-2 - addc r0,r0,r5 - mtctr r4 - blelr- -1: lwzu r4,4(r3) - adde r0,r0,r4 - bdnz 1b - addze r0,r0 /* add in final carry */ - rldicl r4,r0,32,0 /* fold two 32-bit halves together */ - add r0,r0,r4 - srdi r0,r0,32 - rlwinm r3,r0,16,0,31 /* fold two halves together */ - add r3,r0,r3 - not r3,r3 - srwi r3,r3,16 - blr - -/* * Computes the checksum of a memory block at buff, length len, * and adds in "sum" (32-bit). * - * csum_partial(r3=buff, r4=len, r5=sum) + * __csum_partial(r3=buff, r4=len, r5=sum) */ -_GLOBAL(csum_partial) +_GLOBAL(__csum_partial) addic r0,r5,0 /* clear carry */ srdi. r6,r4,3 /* less than 8 bytes? */ diff --git a/arch/powerpc/lib/checksum_wrappers_64.c b/arch/powerpc/lib/checksum_wrappers.c index 08e3a3356c40..08e3a3356c40 100644 --- a/arch/powerpc/lib/checksum_wrappers_64.c +++ b/arch/powerpc/lib/checksum_wrappers.c diff --git a/arch/powerpc/lib/ppc_ksyms.c b/arch/powerpc/lib/ppc_ksyms.c index c7f8e9586316..c422812f7405 100644 --- a/arch/powerpc/lib/ppc_ksyms.c +++ b/arch/powerpc/lib/ppc_ksyms.c @@ -17,10 +17,8 @@ EXPORT_SYMBOL(strcmp); EXPORT_SYMBOL(strncmp); #ifndef CONFIG_GENERIC_CSUM -EXPORT_SYMBOL(csum_partial); +EXPORT_SYMBOL(__csum_partial); EXPORT_SYMBOL(csum_partial_copy_generic); -EXPORT_SYMBOL(ip_fast_csum); -EXPORT_SYMBOL(csum_tcpudp_magic); #endif EXPORT_SYMBOL(__copy_tofrom_user); diff --git a/arch/powerpc/mm/8xx_mmu.c b/arch/powerpc/mm/8xx_mmu.c new file mode 100644 index 000000000000..949100577db5 --- /dev/null +++ b/arch/powerpc/mm/8xx_mmu.c @@ -0,0 +1,141 @@ +/* + * This file contains the routines for initializing the MMU + * on the 8xx series of chips. + * -- christophe + * + * Derived from arch/powerpc/mm/40x_mmu.c: + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include <linux/memblock.h> + +#include "mmu_decl.h" + +extern int __map_without_ltlbs; +/* + * MMU_init_hw does the chip-specific initialization of the MMU hardware. + */ +void __init MMU_init_hw(void) +{ + /* Nothing to do for the time being but keep it similar to other PPC */ +} + +#define LARGE_PAGE_SIZE_4M (1<<22) +#define LARGE_PAGE_SIZE_8M (1<<23) +#define LARGE_PAGE_SIZE_64M (1<<26) + +unsigned long __init mmu_mapin_ram(unsigned long top) +{ + unsigned long v, s, mapped; + phys_addr_t p; + + v = KERNELBASE; + p = 0; + s = top; + + if (__map_without_ltlbs) + return 0; + +#ifdef CONFIG_PPC_4K_PAGES + while (s >= LARGE_PAGE_SIZE_8M) { + pmd_t *pmdp; + unsigned long val = p | MD_PS8MEG; + + pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v); + *pmdp++ = __pmd(val); + *pmdp++ = __pmd(val + LARGE_PAGE_SIZE_4M); + + v += LARGE_PAGE_SIZE_8M; + p += LARGE_PAGE_SIZE_8M; + s -= LARGE_PAGE_SIZE_8M; + } +#else /* CONFIG_PPC_16K_PAGES */ + while (s >= LARGE_PAGE_SIZE_64M) { + pmd_t *pmdp; + unsigned long val = p | MD_PS8MEG; + + pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v); + *pmdp++ = __pmd(val); + + v += LARGE_PAGE_SIZE_64M; + p += LARGE_PAGE_SIZE_64M; + s -= LARGE_PAGE_SIZE_64M; + } +#endif + + mapped = top - s; + + /* If the size of RAM is not an exact power of two, we may not + * have covered RAM in its entirety with 8 MiB + * pages. Consequently, restrict the top end of RAM currently + * allocable so that calls to the MEMBLOCK to allocate PTEs for "tail" + * coverage with normal-sized pages (or other reasons) do not + * attempt to allocate outside the allowed range. + */ + memblock_set_current_limit(mapped); + + return mapped; +} + +void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size) +{ + /* We don't currently support the first MEMBLOCK not mapping 0 + * physical on those processors + */ + BUG_ON(first_memblock_base != 0); + +#ifdef CONFIG_PIN_TLB + /* 8xx can only access 24MB at the moment */ + memblock_set_current_limit(min_t(u64, first_memblock_size, 0x01800000)); +#else + /* 8xx can only access 8MB at the moment */ + memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000)); +#endif +} + +/* + * Set up to use a given MMU context. + * id is context number, pgd is PGD pointer. + * + * We place the physical address of the new task page directory loaded + * into the MMU base register, and set the ASID compare register with + * the new "context." + */ +void set_context(unsigned long id, pgd_t *pgd) +{ + s16 offset = (s16)(__pa(swapper_pg_dir)); + +#ifdef CONFIG_BDI_SWITCH + pgd_t **ptr = *(pgd_t ***)(KERNELBASE + 0xf0); + + /* Context switch the PTE pointer for the Abatron BDI2000. + * The PGDIR is passed as second argument. + */ + *(ptr + 1) = pgd; +#endif + + /* Register M_TW will contain base address of level 1 table minus the + * lower part of the kernel PGDIR base address, so that all accesses to + * level 1 table are done relative to lower part of kernel PGDIR base + * address. + */ + mtspr(SPRN_M_TW, __pa(pgd) - offset); + + /* Update context */ + mtspr(SPRN_M_CASID, id); + /* sync */ + mb(); +} + +void flush_instruction_cache(void) +{ + isync(); + mtspr(SPRN_IC_CST, IDC_INVALL); + isync(); +} diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 1ffeda85c086..adfee3f1aeb9 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_PPC_ICSWX) += icswx.o obj-$(CONFIG_PPC_ICSWX_PID) += icswx_pid.o obj-$(CONFIG_40x) += 40x_mmu.o obj-$(CONFIG_44x) += 44x_mmu.o +obj-$(CONFIG_PPC_8xx) += 8xx_mmu.o obj-$(CONFIG_PPC_FSL_BOOK3E) += fsl_booke_mmu.o obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o obj-$(CONFIG_PPC_SPLPAR) += vphn.o diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c index 169aba446a74..2dc74e5c6458 100644 --- a/arch/powerpc/mm/dma-noncoherent.c +++ b/arch/powerpc/mm/dma-noncoherent.c @@ -327,7 +327,7 @@ void __dma_sync(void *vaddr, size_t size, int direction) * invalidate only when cache-line aligned otherwise there is * the potential for discarding uncommitted data from the cache */ - if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1))) + if ((start | end) & (L1_CACHE_BYTES - 1)) flush_dcache_range(start, end); else invalidate_dcache_range(start, end); diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index f3afe3d97f6b..a1b2713f6e96 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -72,10 +72,11 @@ unsigned long tlbcam_sz(int idx) return tlbcam_addrs[idx].limit - tlbcam_addrs[idx].start + 1; } +#ifdef CONFIG_FSL_BOOKE /* * Return PA for this VA if it is mapped by a CAM, or 0 */ -phys_addr_t v_mapped_by_tlbcam(unsigned long va) +phys_addr_t v_block_mapped(unsigned long va) { int b; for (b = 0; b < tlbcam_index; ++b) @@ -87,7 +88,7 @@ phys_addr_t v_mapped_by_tlbcam(unsigned long va) /* * Return VA for a given PA or 0 if not mapped */ -unsigned long p_mapped_by_tlbcam(phys_addr_t pa) +unsigned long p_block_mapped(phys_addr_t pa) { int b; for (b = 0; b < tlbcam_index; ++b) @@ -97,6 +98,7 @@ unsigned long p_mapped_by_tlbcam(phys_addr_t pa) return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys); return 0; } +#endif /* * Set up a variable-size TLB entry (tlbcam). The parameters are not checked; diff --git a/arch/powerpc/mm/hash64_4k.c b/arch/powerpc/mm/hash64_4k.c index e7c04542ba62..47d1b26effc6 100644 --- a/arch/powerpc/mm/hash64_4k.c +++ b/arch/powerpc/mm/hash64_4k.c @@ -44,7 +44,7 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid, * a write access. Since this is 4K insert of 64K page size * also add _PAGE_COMBO */ - new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE; + new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED; if (access & _PAGE_RW) new_pte |= _PAGE_DIRTY; } while (old_pte != __cmpxchg_u64((unsigned long *)ptep, @@ -106,7 +106,7 @@ repeat: } } /* - * Hypervisor failure. Restore old pmd and return -1 + * Hypervisor failure. Restore old pte and return -1 * similar to __hash_page_* */ if (unlikely(slot == -2)) { diff --git a/arch/powerpc/mm/hash64_64k.c b/arch/powerpc/mm/hash64_64k.c index edb09912f0c9..b2d659cf51c6 100644 --- a/arch/powerpc/mm/hash64_64k.c +++ b/arch/powerpc/mm/hash64_64k.c @@ -188,7 +188,7 @@ repeat: } } /* - * Hypervisor failure. Restore old pmd and return -1 + * Hypervisor failure. Restore old pte and return -1 * similar to __hash_page_* */ if (unlikely(slot == -2)) { @@ -249,8 +249,7 @@ int __hash_page_64K(unsigned long ea, unsigned long access, return 0; /* * Try to lock the PTE, add ACCESSED and DIRTY if it was - * a write access. Since this is 4K insert of 64K page size - * also add _PAGE_COMBO + * a write access. */ new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED; if (access & _PAGE_RW) @@ -311,7 +310,7 @@ repeat: } } /* - * Hypervisor failure. Restore old pmd and return -1 + * Hypervisor failure. Restore old pte and return -1 * similar to __hash_page_* */ if (unlikely(slot == -2)) { diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 1005281be9a6..7635b1c6b5da 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -168,11 +168,11 @@ unsigned long htab_convert_pte_flags(unsigned long pteflags) rflags |= HPTE_R_N; /* * PP bits: - * Linux use slb key 0 for kernel and 1 for user. - * kernel areas are mapped by PP bits 00 - * and and there is no kernel RO (_PAGE_KERNEL_RO). - * User area mapped by 0x2 and read only use by - * 0x3. + * Linux uses slb key 0 for kernel and 1 for user. + * kernel areas are mapped with PP=00 + * and there is no kernel RO (_PAGE_KERNEL_RO). + * User area is mapped with PP=0x2 for read/write + * or PP=0x3 for read-only (including writeable but clean pages). */ if (pteflags & _PAGE_USER) { rflags |= 0x2; @@ -265,28 +265,32 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, return ret < 0 ? ret : 0; } -#ifdef CONFIG_MEMORY_HOTPLUG int htab_remove_mapping(unsigned long vstart, unsigned long vend, int psize, int ssize) { unsigned long vaddr; unsigned int step, shift; + int rc; + int ret = 0; shift = mmu_psize_defs[psize].shift; step = 1 << shift; - if (!ppc_md.hpte_removebolted) { - printk(KERN_WARNING "Platform doesn't implement " - "hpte_removebolted\n"); - return -EINVAL; - } + if (!ppc_md.hpte_removebolted) + return -ENODEV; - for (vaddr = vstart; vaddr < vend; vaddr += step) - ppc_md.hpte_removebolted(vaddr, psize, ssize); + for (vaddr = vstart; vaddr < vend; vaddr += step) { + rc = ppc_md.hpte_removebolted(vaddr, psize, ssize); + if (rc == -ENOENT) { + ret = -ENOENT; + continue; + } + if (rc < 0) + return rc; + } - return 0; + return ret; } -#endif /* CONFIG_MEMORY_HOTPLUG */ static int __init htab_dt_scan_seg_sizes(unsigned long node, const char *uname, int depth, @@ -607,10 +611,28 @@ static int __init htab_dt_scan_pftsize(unsigned long node, return 0; } -static unsigned long __init htab_get_table_size(void) +unsigned htab_shift_for_mem_size(unsigned long mem_size) { - unsigned long mem_size, rnd_mem_size, pteg_count, psize; + unsigned memshift = __ilog2(mem_size); + unsigned pshift = mmu_psize_defs[mmu_virtual_psize].shift; + unsigned pteg_shift; + + /* round mem_size up to next power of 2 */ + if ((1UL << memshift) < mem_size) + memshift += 1; + + /* aim for 2 pages / pteg */ + pteg_shift = memshift - (pshift + 1); + /* + * 2^11 PTEGS of 128 bytes each, ie. 2^18 bytes is the minimum htab + * size permitted by the architecture. + */ + return max(pteg_shift + 7, 18U); +} + +static unsigned long __init htab_get_table_size(void) +{ /* If hash size isn't already provided by the platform, we try to * retrieve it from the device-tree. If it's not there neither, we * calculate it now based on the total RAM size @@ -620,31 +642,30 @@ static unsigned long __init htab_get_table_size(void) if (ppc64_pft_size) return 1UL << ppc64_pft_size; - /* round mem_size up to next power of 2 */ - mem_size = memblock_phys_mem_size(); - rnd_mem_size = 1UL << __ilog2(mem_size); - if (rnd_mem_size < mem_size) - rnd_mem_size <<= 1; - - /* # pages / 2 */ - psize = mmu_psize_defs[mmu_virtual_psize].shift; - pteg_count = max(rnd_mem_size >> (psize + 1), 1UL << 11); - - return pteg_count << 7; + return 1UL << htab_shift_for_mem_size(memblock_phys_mem_size()); } #ifdef CONFIG_MEMORY_HOTPLUG int create_section_mapping(unsigned long start, unsigned long end) { - return htab_bolt_mapping(start, end, __pa(start), - pgprot_val(PAGE_KERNEL), mmu_linear_psize, - mmu_kernel_ssize); + int rc = htab_bolt_mapping(start, end, __pa(start), + pgprot_val(PAGE_KERNEL), mmu_linear_psize, + mmu_kernel_ssize); + + if (rc < 0) { + int rc2 = htab_remove_mapping(start, end, mmu_linear_psize, + mmu_kernel_ssize); + BUG_ON(rc2 && (rc2 != -ENOENT)); + } + return rc; } int remove_section_mapping(unsigned long start, unsigned long end) { - return htab_remove_mapping(start, end, mmu_linear_psize, - mmu_kernel_ssize); + int rc = htab_remove_mapping(start, end, mmu_linear_psize, + mmu_kernel_ssize); + WARN_ON(rc < 0); + return rc; } #endif /* CONFIG_MEMORY_HOTPLUG */ diff --git a/arch/powerpc/mm/hugetlbpage-hash64.c b/arch/powerpc/mm/hugetlbpage-hash64.c index e2138c7ae70f..8555fce902fe 100644 --- a/arch/powerpc/mm/hugetlbpage-hash64.c +++ b/arch/powerpc/mm/hugetlbpage-hash64.c @@ -76,7 +76,7 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid, if (old_pte & _PAGE_F_SECOND) hash = ~hash; slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; - slot += (old_pte & _PAGE_F_GIX) >> 12; + slot += (old_pte & _PAGE_F_GIX) >> _PAGE_F_GIX_SHIFT; if (ppc_md.hpte_updatepp(slot, rflags, vpn, mmu_psize, mmu_psize, ssize, flags) == -1) @@ -105,7 +105,8 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid, return -1; } - new_pte |= (slot << 12) & (_PAGE_F_SECOND | _PAGE_F_GIX); + new_pte |= (slot << _PAGE_F_GIX_SHIFT) & + (_PAGE_F_SECOND | _PAGE_F_GIX); } /* diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 744e24bcb85c..6dd272b6196f 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -107,8 +107,7 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp, kmem_cache_free(cachep, new); else { #ifdef CONFIG_PPC_BOOK3S_64 - hpdp->pd = (unsigned long)new | - (shift_to_mmu_psize(pshift) << 2); + hpdp->pd = __pa(new) | (shift_to_mmu_psize(pshift) << 2); #else hpdp->pd = ((unsigned long)new & ~PD_HUGE) | pshift; #endif diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index c2b771614d4f..c899fe340bbd 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -178,10 +178,6 @@ void __init MMU_init(void) /* Initialize early top-down ioremap allocator */ ioremap_bot = IOREMAP_TOP; - /* Map in I/O resources */ - if (ppc_md.progress) - ppc_md.progress("MMU:setio", 0x302); - if (ppc_md.progress) ppc_md.progress("MMU:exit", 0x211); @@ -193,22 +189,3 @@ void __init MMU_init(void) /* Shortly after that, the entire linear mapping will be available */ memblock_set_current_limit(lowmem_end_addr); } - -#ifdef CONFIG_8xx /* No 8xx specific .c file to put that in ... */ -void setup_initial_memory_limit(phys_addr_t first_memblock_base, - phys_addr_t first_memblock_size) -{ - /* We don't currently support the first MEMBLOCK not mapping 0 - * physical on those processors - */ - BUG_ON(first_memblock_base != 0); - -#ifdef CONFIG_PIN_TLB - /* 8xx can only access 24MB at the moment */ - memblock_set_current_limit(min_t(u64, first_memblock_size, 0x01800000)); -#else - /* 8xx can only access 8MB at the moment */ - memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000)); -#endif -} -#endif /* CONFIG_8xx */ diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index 379a6a90644b..ba655666186d 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -85,6 +85,11 @@ static void pgd_ctor(void *addr) memset(addr, 0, PGD_TABLE_SIZE); } +static void pud_ctor(void *addr) +{ + memset(addr, 0, PUD_TABLE_SIZE); +} + static void pmd_ctor(void *addr) { memset(addr, 0, PMD_TABLE_SIZE); @@ -138,14 +143,18 @@ void pgtable_cache_init(void) { pgtable_cache_add(PGD_INDEX_SIZE, pgd_ctor); pgtable_cache_add(PMD_CACHE_INDEX, pmd_ctor); + /* + * In all current configs, when the PUD index exists it's the + * same size as either the pgd or pmd index except with THP enabled + * on book3s 64 + */ + if (PUD_INDEX_SIZE && !PGT_CACHE(PUD_INDEX_SIZE)) + pgtable_cache_add(PUD_INDEX_SIZE, pud_ctor); + if (!PGT_CACHE(PGD_INDEX_SIZE) || !PGT_CACHE(PMD_CACHE_INDEX)) panic("Couldn't allocate pgtable caches"); - /* In all current configs, when the PUD index exists it's the - * same size as either the pgd or pmd index. Verify that the - * initialization above has also created a PUD cache. This - * will need re-examiniation if we add new possibilities for - * the pagetable layout. */ - BUG_ON(PUD_INDEX_SIZE && !PGT_CACHE(PUD_INDEX_SIZE)); + if (PUD_INDEX_SIZE && !PGT_CACHE(PUD_INDEX_SIZE)) + panic("Couldn't allocate pud pgtable caches"); } #ifdef CONFIG_SPARSEMEM_VMEMMAP @@ -188,9 +197,9 @@ static int __meminit vmemmap_populated(unsigned long start, int page_size) */ #ifdef CONFIG_PPC_BOOK3E -static void __meminit vmemmap_create_mapping(unsigned long start, - unsigned long page_size, - unsigned long phys) +static int __meminit vmemmap_create_mapping(unsigned long start, + unsigned long page_size, + unsigned long phys) { /* Create a PTE encoding without page size */ unsigned long i, flags = _PAGE_PRESENT | _PAGE_ACCESSED | @@ -208,6 +217,8 @@ static void __meminit vmemmap_create_mapping(unsigned long start, */ for (i = 0; i < page_size; i += PAGE_SIZE) BUG_ON(map_kernel_page(start + i, phys, flags)); + + return 0; } #ifdef CONFIG_MEMORY_HOTPLUG @@ -217,25 +228,31 @@ static void vmemmap_remove_mapping(unsigned long start, } #endif #else /* CONFIG_PPC_BOOK3E */ -static void __meminit vmemmap_create_mapping(unsigned long start, - unsigned long page_size, - unsigned long phys) +static int __meminit vmemmap_create_mapping(unsigned long start, + unsigned long page_size, + unsigned long phys) { - int mapped = htab_bolt_mapping(start, start + page_size, phys, - pgprot_val(PAGE_KERNEL), - mmu_vmemmap_psize, - mmu_kernel_ssize); - BUG_ON(mapped < 0); + int rc = htab_bolt_mapping(start, start + page_size, phys, + pgprot_val(PAGE_KERNEL), + mmu_vmemmap_psize, mmu_kernel_ssize); + if (rc < 0) { + int rc2 = htab_remove_mapping(start, start + page_size, + mmu_vmemmap_psize, + mmu_kernel_ssize); + BUG_ON(rc2 && (rc2 != -ENOENT)); + } + return rc; } #ifdef CONFIG_MEMORY_HOTPLUG static void vmemmap_remove_mapping(unsigned long start, unsigned long page_size) { - int mapped = htab_remove_mapping(start, start + page_size, - mmu_vmemmap_psize, - mmu_kernel_ssize); - BUG_ON(mapped < 0); + int rc = htab_remove_mapping(start, start + page_size, + mmu_vmemmap_psize, + mmu_kernel_ssize); + BUG_ON((rc < 0) && (rc != -ENOENT)); + WARN_ON(rc == -ENOENT); } #endif @@ -303,6 +320,7 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node) for (; start < end; start += page_size) { void *p; + int rc; if (vmemmap_populated(start, page_size)) continue; @@ -316,7 +334,13 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node) pr_debug(" * %016lx..%016lx allocated at %p\n", start, start + page_size, p); - vmemmap_create_mapping(start, page_size, __pa(p)); + rc = vmemmap_create_mapping(start, page_size, __pa(p)); + if (rc < 0) { + pr_warning( + "vmemmap_populate: Unable to create vmemmap mapping: %d\n", + rc); + return -EFAULT; + } } return 0; diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index f078a1f94fc2..ac79dbde1015 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -119,12 +119,18 @@ int arch_add_memory(int nid, u64 start, u64 size, bool for_device) struct zone *zone; unsigned long start_pfn = start >> PAGE_SHIFT; unsigned long nr_pages = size >> PAGE_SHIFT; + int rc; pgdata = NODE_DATA(nid); start = (unsigned long)__va(start); - if (create_section_mapping(start, start + size)) - return -EINVAL; + rc = create_section_mapping(start, start + size); + if (rc) { + pr_warning( + "Unable to create mapping for hot added memory 0x%llx..0x%llx: %d\n", + start, start + size, rc); + return -EFAULT; + } /* this should work for most non-highmem platforms */ zone = pgdata->node_zones + diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index 9f58ff44a075..bfb7c0bcabd5 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -100,7 +100,6 @@ extern void setbat(int index, unsigned long virt, phys_addr_t phys, extern int __map_without_bats; extern int __allow_ioremap_reserved; -extern unsigned long ioremap_base; extern unsigned int rtas_data, rtas_size; struct hash_pte; @@ -110,7 +109,8 @@ extern unsigned long Hash_size, Hash_mask; #endif /* CONFIG_PPC32 */ #ifdef CONFIG_PPC64 -extern int map_kernel_page(unsigned long ea, unsigned long pa, int flags); +extern int map_kernel_page(unsigned long ea, unsigned long pa, + unsigned long flags); #endif /* CONFIG_PPC64 */ extern unsigned long ioremap_bot; @@ -132,22 +132,17 @@ extern void wii_memory_fixups(void); /* ...and now those things that may be slightly different between processor * architectures. -- Dan */ -#if defined(CONFIG_8xx) -#define MMU_init_hw() do { } while(0) -#define mmu_mapin_ram(top) (0UL) - -#elif defined(CONFIG_4xx) +#ifdef CONFIG_PPC32 extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(unsigned long top); +#endif -#elif defined(CONFIG_PPC_FSL_BOOK3E) +#ifdef CONFIG_PPC_FSL_BOOK3E extern unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx, bool dryrun); extern unsigned long calc_cam_sz(unsigned long ram, unsigned long virt, phys_addr_t phys); #ifdef CONFIG_PPC32 -extern void MMU_init_hw(void); -extern unsigned long mmu_mapin_ram(unsigned long top); extern void adjust_total_lowmem(void); extern int switch_to_as1(void); extern void restore_to_as0(int esel, int offset, void *dt_ptr, int bootcpu); @@ -162,8 +157,14 @@ struct tlbcam { u32 MAS3; u32 MAS7; }; -#elif defined(CONFIG_PPC32) -/* anything 32-bit except 4xx or 8xx */ -extern void MMU_init_hw(void); -extern unsigned long mmu_mapin_ram(unsigned long top); +#endif + +#if defined(CONFIG_6xx) || defined(CONFIG_FSL_BOOKE) +/* 6xx have BATS */ +/* FSL_BOOKE have TLBCAM */ +phys_addr_t v_block_mapped(unsigned long va); +unsigned long p_block_mapped(phys_addr_t pa); +#else +static inline phys_addr_t v_block_mapped(unsigned long va) { return 0; } +static inline unsigned long p_block_mapped(phys_addr_t pa) { return 0; } #endif diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index 7692d1bb1bc6..bf7bf32b54f8 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -37,35 +37,10 @@ #include "mmu_decl.h" -unsigned long ioremap_base; unsigned long ioremap_bot; EXPORT_SYMBOL(ioremap_bot); /* aka VMALLOC_END */ -#ifdef CONFIG_6xx -#define HAVE_BATS 1 -#endif - -#if defined(CONFIG_FSL_BOOKE) -#define HAVE_TLBCAM 1 -#endif - -extern char etext[], _stext[]; - -#ifdef HAVE_BATS -extern phys_addr_t v_mapped_by_bats(unsigned long va); -extern unsigned long p_mapped_by_bats(phys_addr_t pa); -#else /* !HAVE_BATS */ -#define v_mapped_by_bats(x) (0UL) -#define p_mapped_by_bats(x) (0UL) -#endif /* HAVE_BATS */ - -#ifdef HAVE_TLBCAM -extern phys_addr_t v_mapped_by_tlbcam(unsigned long va); -extern unsigned long p_mapped_by_tlbcam(phys_addr_t pa); -#else /* !HAVE_TLBCAM */ -#define v_mapped_by_tlbcam(x) (0UL) -#define p_mapped_by_tlbcam(x) (0UL) -#endif /* HAVE_TLBCAM */ +extern char etext[], _stext[], _sinittext[], _einittext[]; #define PGDIR_ORDER (32 + PGD_T_LOG2 - PGDIR_SHIFT) @@ -197,7 +172,7 @@ __ioremap_caller(phys_addr_t addr, unsigned long size, unsigned long flags, /* * Choose an address to map it to. * Once the vmalloc system is running, we use it. - * Before then, we use space going down from ioremap_base + * Before then, we use space going down from IOREMAP_TOP * (ioremap_bot records where we're up to). */ p = addr & PAGE_MASK; @@ -228,19 +203,10 @@ __ioremap_caller(phys_addr_t addr, unsigned long size, unsigned long flags, /* * Is it already mapped? Perhaps overlapped by a previous - * BAT mapping. If the whole area is mapped then we're done, - * otherwise remap it since we want to keep the virt addrs for - * each request contiguous. - * - * We make the assumption here that if the bottom and top - * of the range we want are mapped then it's mapped to the - * same virt address (and this is contiguous). - * -- Cort + * mapping. */ - if ((v = p_mapped_by_bats(p)) /*&& p_mapped_by_bats(p+size-1)*/ ) - goto out; - - if ((v = p_mapped_by_tlbcam(p))) + v = p_block_mapped(p); + if (v) goto out; if (slab_is_available()) { @@ -278,7 +244,8 @@ void iounmap(volatile void __iomem *addr) * If mapped by BATs then there is nothing to do. * Calling vfree() generates a benign warning. */ - if (v_mapped_by_bats((unsigned long)addr)) return; + if (v_block_mapped((unsigned long)addr)) + return; if (addr > high_memory && (unsigned long) addr < ioremap_bot) vunmap((void *) (PAGE_MASK & (unsigned long)addr)); @@ -322,7 +289,8 @@ void __init __mapin_ram_chunk(unsigned long offset, unsigned long top) v = PAGE_OFFSET + s; p = memstart_addr + s; for (; s < top; s += PAGE_SIZE) { - ktext = ((char *) v >= _stext && (char *) v < etext); + ktext = ((char *)v >= _stext && (char *)v < etext) || + ((char *)v >= _sinittext && (char *)v < _einittext); f = ktext ? pgprot_val(PAGE_KERNEL_TEXT) : pgprot_val(PAGE_KERNEL); map_page(v, p, f); #ifdef CONFIG_PPC_STD_MMU_32 @@ -403,7 +371,7 @@ static int __change_page_attr(struct page *page, pgprot_t prot) BUG_ON(PageHighMem(page)); address = (unsigned long)page_address(page); - if (v_mapped_by_bats(address) || v_mapped_by_tlbcam(address)) + if (v_block_mapped(address)) return 0; if (!get_pteptr(&init_mm, address, &kpte, &kpmd)) return -EINVAL; diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index d9cc66cbdbb7..347106080bb1 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -88,7 +88,7 @@ static __ref void *early_alloc_pgtable(unsigned long size) * map_kernel_page adds an entry to the ioremap page table * and adds an entry to the HPT, possibly bolting it */ -int map_kernel_page(unsigned long ea, unsigned long pa, int flags) +int map_kernel_page(unsigned long ea, unsigned long pa, unsigned long flags) { pgd_t *pgdp; pud_t *pudp; @@ -749,7 +749,7 @@ pmd_t pfn_pmd(unsigned long pfn, pgprot_t pgprot) { unsigned long pmdv; - pmdv = pfn << PTE_RPN_SHIFT; + pmdv = (pfn << PTE_RPN_SHIFT) & PTE_RPN_MASK; return pmd_set_protbits(__pmd(pmdv), pgprot); } @@ -817,6 +817,13 @@ pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm, int has_transparent_hugepage(void) { + + BUILD_BUG_ON_MSG((PMD_SHIFT - PAGE_SHIFT) >= MAX_ORDER, + "hugepages can't be allocated by the buddy allocator"); + + BUILD_BUG_ON_MSG((PMD_SHIFT - PAGE_SHIFT) < 2, + "We need more than 2 pages to do deferred thp split"); + if (!mmu_has_feature(MMU_FTR_16M_PAGE)) return 0; /* diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index 6b2f3e457171..2a049fb8523d 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -49,7 +49,7 @@ struct batrange { /* stores address ranges mapped by BATs */ /* * Return PA for this VA if it is mapped by a BAT, or 0 */ -phys_addr_t v_mapped_by_bats(unsigned long va) +phys_addr_t v_block_mapped(unsigned long va) { int b; for (b = 0; b < 4; ++b) @@ -61,7 +61,7 @@ phys_addr_t v_mapped_by_bats(unsigned long va) /* * Return VA for a given PA or 0 if not mapped */ -unsigned long p_mapped_by_bats(phys_addr_t pa) +unsigned long p_block_mapped(phys_addr_t pa) { int b; for (b = 0; b < 4; ++b) diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S index 29d6987c37ba..eb82d787d99a 100644 --- a/arch/powerpc/mm/tlb_low_64e.S +++ b/arch/powerpc/mm/tlb_low_64e.S @@ -895,7 +895,7 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS) BEGIN_MMU_FTR_SECTION virt_page_table_tlb_miss_done: - /* We have overriden MAS2:EPN but currently our primary TLB miss + /* We have overridden MAS2:EPN but currently our primary TLB miss * handler will always restore it so that should not be an issue, * if we ever optimize the primary handler to not write MAS2 on * some cases, we'll have to restore MAS2:EPN here based on the diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index bb04e4df3100..f4668488512c 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -640,9 +640,7 @@ static void early_init_this_mmu(void) * transient mapping would cause problems. */ #ifdef CONFIG_SMP - if (cpu != boot_cpuid && - (cpu != cpu_first_thread_sibling(cpu) || - cpu == cpu_first_thread_sibling(boot_cpuid))) + if (hweight32(get_tensr()) > 1) map = false; #endif diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index 68c477592e43..eabecfcaef7c 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -108,7 +108,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x) blr 2: #ifdef CONFIG_PPC_47x - oris r7,r6,0x8000 /* specify way explicitely */ + oris r7,r6,0x8000 /* specify way explicitly */ clrrwi r4,r3,12 /* get an EPN for the hashing with V = 0 */ ori r4,r4,PPC47x_TLBE_SIZE tlbwe r4,r7,0 /* write it */ @@ -149,7 +149,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x) li r3,-1 /* Current set */ lis r10,tlb_47x_boltmap@h ori r10,r10,tlb_47x_boltmap@l - lis r7,0x8000 /* Specify way explicitely */ + lis r7,0x8000 /* Specify way explicitly */ b 9f /* For each set */ diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 863d89386f60..c82497a31c54 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -208,7 +208,7 @@ static void pm_rtas_reset_signals(u32 node) /* * The debug bus is being set to the passthru disable state. - * However, the FW still expects atleast one legal signal routing + * However, the FW still expects at least one legal signal routing * entry or it will return an error on the arguments. If we don't * supply a valid entry, we must ignore all return values. Ignoring * all return values means we might miss an error we should be @@ -1008,7 +1008,7 @@ static int initial_lfsr[] = { * * To avoid the time to compute the LFSR, a lookup table is used. The 24 bit * LFSR sequence is broken into four ranges. The spacing of the precomputed - * values is adjusted in each range so the error between the user specifed + * values is adjusted in each range so the error between the user specified * number (N) of events between samples and the actual number of events based * on the precomputed value will be les then about 6.2%. Note, if the user * specifies N < 2^16, the LFSR value that is 2^16 from the end will be used. diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index d1e65ce545b3..97a1d40d8696 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -651,7 +651,7 @@ static void pmao_restore_workaround(bool ebb) /* * We are already soft-disabled in power_pmu_enable(). We need to hard - * enable to actually prevent the PMU exception from firing. + * disable to actually prevent the PMU exception from firing. */ hard_irq_disable(); diff --git a/arch/powerpc/perf/hv-24x7.c b/arch/powerpc/perf/hv-24x7.c index 3b09ecfd0aee..2da41b78cb6d 100644 --- a/arch/powerpc/perf/hv-24x7.c +++ b/arch/powerpc/perf/hv-24x7.c @@ -27,20 +27,6 @@ #include "hv-24x7-catalog.h" #include "hv-common.h" -static const char *event_domain_suffix(unsigned domain) -{ - switch (domain) { -#define DOMAIN(n, v, x, c) \ - case HV_PERF_DOMAIN_##n: \ - return "__" #n; -#include "hv-24x7-domains.h" -#undef DOMAIN - default: - WARN(1, "unknown domain %d\n", domain); - return "__UNKNOWN_DOMAIN_SUFFIX"; - } -} - static bool domain_is_valid(unsigned domain) { switch (domain) { @@ -68,6 +54,24 @@ static bool is_physical_domain(unsigned domain) } } +static const char *domain_name(unsigned domain) +{ + if (!domain_is_valid(domain)) + return NULL; + + switch (domain) { + case HV_PERF_DOMAIN_PHYS_CHIP: return "Physical Chip"; + case HV_PERF_DOMAIN_PHYS_CORE: return "Physical Core"; + case HV_PERF_DOMAIN_VCPU_HOME_CORE: return "VCPU Home Core"; + case HV_PERF_DOMAIN_VCPU_HOME_CHIP: return "VCPU Home Chip"; + case HV_PERF_DOMAIN_VCPU_HOME_NODE: return "VCPU Home Node"; + case HV_PERF_DOMAIN_VCPU_REMOTE_NODE: return "VCPU Remote Node"; + } + + WARN_ON_ONCE(domain); + return NULL; +} + static bool catalog_entry_domain_is_valid(unsigned domain) { return is_physical_domain(domain); @@ -101,6 +105,7 @@ static bool catalog_entry_domain_is_valid(unsigned domain) EVENT_DEFINE_RANGE_FORMAT(domain, config, 0, 3); /* u16 */ EVENT_DEFINE_RANGE_FORMAT(core, config, 16, 31); +EVENT_DEFINE_RANGE_FORMAT(chip, config, 16, 31); EVENT_DEFINE_RANGE_FORMAT(vcpu, config, 16, 31); /* u32, see "data_offset" */ EVENT_DEFINE_RANGE_FORMAT(offset, config, 32, 63); @@ -115,6 +120,7 @@ static struct attribute *format_attrs[] = { &format_attr_domain.attr, &format_attr_offset.attr, &format_attr_core.attr, + &format_attr_chip.attr, &format_attr_vcpu.attr, &format_attr_lpar.attr, NULL, @@ -274,32 +280,70 @@ static unsigned long h_get_24x7_catalog_page(char page[], version, index); } -static unsigned core_domains[] = { - HV_PERF_DOMAIN_PHYS_CORE, - HV_PERF_DOMAIN_VCPU_HOME_CORE, - HV_PERF_DOMAIN_VCPU_HOME_CHIP, - HV_PERF_DOMAIN_VCPU_HOME_NODE, - HV_PERF_DOMAIN_VCPU_REMOTE_NODE, -}; -/* chip event data always yeilds a single event, core yeilds multiple */ -#define MAX_EVENTS_PER_EVENT_DATA ARRAY_SIZE(core_domains) - +/* + * Each event we find in the catalog, will have a sysfs entry. Format the + * data for this sysfs entry based on the event's domain. + * + * Events belonging to the Chip domain can only be monitored in that domain. + * i.e the domain for these events is a fixed/knwon value. + * + * Events belonging to the Core domain can be monitored either in the physical + * core or in one of the virtual CPU domains. So the domain value for these + * events must be specified by the user (i.e is a required parameter). Format + * the Core events with 'domain=?' so the perf-tool can error check required + * parameters. + * + * NOTE: For the Core domain events, rather than making domain a required + * parameter we could default it to PHYS_CORE and allowe users to + * override the domain to one of the VCPU domains. + * + * However, this can make the interface a little inconsistent. + * + * If we set domain=2 (PHYS_CHIP) and allow user to override this field + * the user may be tempted to also modify the "offset=x" field in which + * can lead to confusing usage. Consider the HPM_PCYC (offset=0x18) and + * HPM_INST (offset=0x20) events. With: + * + * perf stat -e hv_24x7/HPM_PCYC,offset=0x20/ + * + * we end up monitoring HPM_INST, while the command line has HPM_PCYC. + * + * By not assigning a default value to the domain for the Core events, + * we can have simple guidelines: + * + * - Specifying values for parameters with "=?" is required. + * + * - Specifying (i.e overriding) values for other parameters + * is undefined. + */ static char *event_fmt(struct hv_24x7_event_data *event, unsigned domain) { const char *sindex; const char *lpar; + const char *domain_str; + char buf[8]; - if (is_physical_domain(domain)) { + switch (domain) { + case HV_PERF_DOMAIN_PHYS_CHIP: + snprintf(buf, sizeof(buf), "%d", domain); + domain_str = buf; + lpar = "0x0"; + sindex = "chip"; + break; + case HV_PERF_DOMAIN_PHYS_CORE: + domain_str = "?"; lpar = "0x0"; sindex = "core"; - } else { + break; + default: + domain_str = "?"; lpar = "?"; sindex = "vcpu"; } return kasprintf(GFP_KERNEL, - "domain=0x%x,offset=0x%x,%s=?,lpar=%s", - domain, + "domain=%s,offset=0x%x,%s=?,lpar=%s", + domain_str, be16_to_cpu(event->event_counter_offs) + be16_to_cpu(event->event_group_record_offs), sindex, @@ -339,6 +383,15 @@ static struct attribute *device_str_attr_create_(char *name, char *str) return &attr->attr.attr; } +/* + * Allocate and initialize strings representing event attributes. + * + * NOTE: The strings allocated here are never destroyed and continue to + * exist till shutdown. This is to allow us to create as many events + * from the catalog as possible, even if we encounter errors with some. + * In case of changes to error paths in future, these may need to be + * freed by the caller. + */ static struct attribute *device_str_attr_create(char *name, int name_max, int name_nonce, char *str, size_t str_max) @@ -370,16 +423,6 @@ out_s: return NULL; } -static void device_str_attr_destroy(struct attribute *attr) -{ - struct dev_ext_attribute *d; - - d = container_of(attr, struct dev_ext_attribute, attr.attr); - kfree(d->var); - kfree(d->attr.attr.name); - kfree(d); -} - static struct attribute *event_to_attr(unsigned ix, struct hv_24x7_event_data *event, unsigned domain, @@ -387,7 +430,6 @@ static struct attribute *event_to_attr(unsigned ix, { int event_name_len; char *ev_name, *a_ev_name, *val; - const char *ev_suffix; struct attribute *attr; if (!domain_is_valid(domain)) { @@ -400,14 +442,13 @@ static struct attribute *event_to_attr(unsigned ix, if (!val) return NULL; - ev_suffix = event_domain_suffix(domain); ev_name = event_name(event, &event_name_len); if (!nonce) - a_ev_name = kasprintf(GFP_KERNEL, "%.*s%s", - (int)event_name_len, ev_name, ev_suffix); + a_ev_name = kasprintf(GFP_KERNEL, "%.*s", + (int)event_name_len, ev_name); else - a_ev_name = kasprintf(GFP_KERNEL, "%.*s%s__%d", - (int)event_name_len, ev_name, ev_suffix, nonce); + a_ev_name = kasprintf(GFP_KERNEL, "%.*s__%d", + (int)event_name_len, ev_name, nonce); if (!a_ev_name) goto out_val; @@ -452,45 +493,14 @@ event_to_long_desc_attr(struct hv_24x7_event_data *event, int nonce) return device_str_attr_create(name, nl, nonce, desc, dl); } -static ssize_t event_data_to_attrs(unsigned ix, struct attribute **attrs, +static int event_data_to_attrs(unsigned ix, struct attribute **attrs, struct hv_24x7_event_data *event, int nonce) { - unsigned i; - - switch (event->domain) { - case HV_PERF_DOMAIN_PHYS_CHIP: - *attrs = event_to_attr(ix, event, event->domain, nonce); - return 1; - case HV_PERF_DOMAIN_PHYS_CORE: - for (i = 0; i < ARRAY_SIZE(core_domains); i++) { - attrs[i] = event_to_attr(ix, event, core_domains[i], - nonce); - if (!attrs[i]) { - pr_warn("catalog event %u: individual attr %u " - "creation failure\n", ix, i); - for (; i; i--) - device_str_attr_destroy(attrs[i - 1]); - return -1; - } - } - return i; - default: - pr_warn("catalog event %u: domain %u is not allowed in the " - "catalog\n", ix, event->domain); + *attrs = event_to_attr(ix, event, event->domain, nonce); + if (!*attrs) return -1; - } -} -static size_t event_to_attr_ct(struct hv_24x7_event_data *event) -{ - switch (event->domain) { - case HV_PERF_DOMAIN_PHYS_CHIP: - return 1; - case HV_PERF_DOMAIN_PHYS_CORE: - return ARRAY_SIZE(core_domains); - default: - return 0; - } + return 0; } /* */ @@ -718,9 +728,8 @@ static int create_events_from_catalog(struct attribute ***events_, goto e_free; } - if (SIZE_MAX / MAX_EVENTS_PER_EVENT_DATA - 1 < event_entry_count) { - pr_err("event_entry_count %zu is invalid\n", - event_entry_count); + if (SIZE_MAX - 1 < event_entry_count) { + pr_err("event_entry_count %zu is invalid\n", event_entry_count); ret = -EIO; goto e_free; } @@ -793,7 +802,7 @@ static int create_events_from_catalog(struct attribute ***events_, continue; } - attr_max += event_to_attr_ct(event); + attr_max++; } event_idx_last = event_idx; @@ -843,12 +852,12 @@ static int create_events_from_catalog(struct attribute ***events_, nonce = event_uniq_add(&ev_uniq, name, nl, event->domain); ct = event_data_to_attrs(event_idx, events + event_attr_ct, event, nonce); - if (ct <= 0) { + if (ct < 0) { pr_warn("event %zu (%.*s) creation failure, skipping\n", event_idx, nl, name); junk_events++; } else { - event_attr_ct += ct; + event_attr_ct++; event_descs[desc_ct] = event_to_desc_attr(event, nonce); if (event_descs[desc_ct]) desc_ct++; @@ -953,6 +962,27 @@ e_free: return ret; } +static ssize_t domains_show(struct device *dev, struct device_attribute *attr, + char *page) +{ + int d, n, count = 0; + const char *str; + + for (d = 0; d < HV_PERF_DOMAIN_MAX; d++) { + str = domain_name(d); + if (!str) + continue; + + n = sprintf(page, "%d: %s\n", d, str); + if (n < 0) + break; + + count += n; + page += n; + } + return count; +} + #define PAGE_0_ATTR(_name, _fmt, _expr) \ static ssize_t _name##_show(struct device *dev, \ struct device_attribute *dev_attr, \ @@ -981,6 +1011,7 @@ PAGE_0_ATTR(catalog_version, "%lld\n", PAGE_0_ATTR(catalog_len, "%lld\n", (unsigned long long)be32_to_cpu(page_0->length) * 4096); static BIN_ATTR_RO(catalog, 0/* real length varies */); +static DEVICE_ATTR_RO(domains); static struct bin_attribute *if_bin_attrs[] = { &bin_attr_catalog, @@ -990,6 +1021,7 @@ static struct bin_attribute *if_bin_attrs[] = { static struct attribute *if_attrs[] = { &dev_attr_catalog_len.attr, &dev_attr_catalog_version.attr, + &dev_attr_domains.attr, NULL, }; @@ -1081,10 +1113,16 @@ static int add_event_to_24x7_request(struct perf_event *event, return -EINVAL; } - if (is_physical_domain(event_get_domain(event))) + switch (event_get_domain(event)) { + case HV_PERF_DOMAIN_PHYS_CHIP: + idx = event_get_chip(event); + break; + case HV_PERF_DOMAIN_PHYS_CORE: idx = event_get_core(event); - else + break; + default: idx = event_get_vcpu(event); + } i = request_buffer->num_requests++; req = &request_buffer->requests[i]; @@ -1200,11 +1238,12 @@ static int h_24x7_event_init(struct perf_event *event) return -EACCES; } - /* see if the event complains */ + /* Get the initial value of the counter for this event */ if (single_24x7_request(event, &ct)) { pr_devel("test hcall failed\n"); return -EIO; } + (void)local64_xchg(&event->hw.prev_count, ct); return 0; } @@ -1267,6 +1306,16 @@ static void h_24x7_event_read(struct perf_event *event) h24x7hw = &get_cpu_var(hv_24x7_hw); h24x7hw->events[i] = event; put_cpu_var(h24x7hw); + /* + * Clear the event count so we can compute the _change_ + * in the 24x7 raw counter value at the end of the txn. + * + * Note that we could alternatively read the 24x7 value + * now and save its value in event->hw.prev_count. But + * that would require issuing a hcall, which would then + * defeat the purpose of using the txn interface. + */ + local64_set(&event->count, 0); } put_cpu_var(hv_24x7_reqb); diff --git a/arch/powerpc/perf/hv-24x7.h b/arch/powerpc/perf/hv-24x7.h index 0f9fa21a29f2..791455e7f5cf 100644 --- a/arch/powerpc/perf/hv-24x7.h +++ b/arch/powerpc/perf/hv-24x7.h @@ -7,6 +7,7 @@ enum hv_perf_domains { #define DOMAIN(n, v, x, c) HV_PERF_DOMAIN_##n = v, #include "hv-24x7-domains.h" #undef DOMAIN + HV_PERF_DOMAIN_MAX, }; struct hv_24x7_request { @@ -80,7 +81,7 @@ struct hv_24x7_result { __u8 results_complete; __be16 num_elements_returned; - /* This is a copy of @data_size from the coresponding hv_24x7_request */ + /* This is a copy of @data_size from the corresponding hv_24x7_request */ __be16 result_element_data_size; __u8 reserved[0x2]; diff --git a/arch/powerpc/perf/hv-gpci.c b/arch/powerpc/perf/hv-gpci.c index 856fe6e03c2a..7aa37236bb70 100644 --- a/arch/powerpc/perf/hv-gpci.c +++ b/arch/powerpc/perf/hv-gpci.c @@ -127,8 +127,16 @@ static const struct attribute_group *attr_groups[] = { NULL, }; -#define GPCI_MAX_DATA_BYTES \ - (1024 - sizeof(struct hv_get_perf_counter_info_params)) +#define HGPCI_REQ_BUFFER_SIZE 4096 +#define HGPCI_MAX_DATA_BYTES \ + (HGPCI_REQ_BUFFER_SIZE - sizeof(struct hv_get_perf_counter_info_params)) + +DEFINE_PER_CPU(char, hv_gpci_reqb[HGPCI_REQ_BUFFER_SIZE]) __aligned(sizeof(uint64_t)); + +struct hv_gpci_request_buffer { + struct hv_get_perf_counter_info_params params; + uint8_t bytes[HGPCI_MAX_DATA_BYTES]; +} __packed; static unsigned long single_gpci_request(u32 req, u32 starting_index, u16 secondary_index, u8 version_in, u32 offset, u8 length, @@ -137,24 +145,21 @@ static unsigned long single_gpci_request(u32 req, u32 starting_index, unsigned long ret; size_t i; u64 count; + struct hv_gpci_request_buffer *arg; + + arg = (void *)get_cpu_var(hv_gpci_reqb); + memset(arg, 0, HGPCI_REQ_BUFFER_SIZE); - struct { - struct hv_get_perf_counter_info_params params; - uint8_t bytes[GPCI_MAX_DATA_BYTES]; - } __packed __aligned(sizeof(uint64_t)) arg = { - .params = { - .counter_request = cpu_to_be32(req), - .starting_index = cpu_to_be32(starting_index), - .secondary_index = cpu_to_be16(secondary_index), - .counter_info_version_in = version_in, - } - }; + arg->params.counter_request = cpu_to_be32(req); + arg->params.starting_index = cpu_to_be32(starting_index); + arg->params.secondary_index = cpu_to_be16(secondary_index); + arg->params.counter_info_version_in = version_in; ret = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO, - virt_to_phys(&arg), sizeof(arg)); + virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE); if (ret) { pr_devel("hcall failed: 0x%lx\n", ret); - return ret; + goto out; } /* @@ -163,9 +168,11 @@ static unsigned long single_gpci_request(u32 req, u32 starting_index, */ count = 0; for (i = offset; i < offset + length; i++) - count |= arg.bytes[i] << (i - offset); + count |= arg->bytes[i] << (i - offset); *value = count; +out: + put_cpu_var(hv_gpci_reqb); return ret; } @@ -245,10 +252,10 @@ static int h_gpci_event_init(struct perf_event *event) } /* last byte within the buffer? */ - if ((event_get_offset(event) + length) > GPCI_MAX_DATA_BYTES) { + if ((event_get_offset(event) + length) > HGPCI_MAX_DATA_BYTES) { pr_devel("request outside of buffer: %zu > %zu\n", (size_t)event_get_offset(event) + length, - GPCI_MAX_DATA_BYTES); + HGPCI_MAX_DATA_BYTES); return -EINVAL; } diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c index 5b62f2389290..a383c23a9070 100644 --- a/arch/powerpc/perf/power7-pmu.c +++ b/arch/powerpc/perf/power7-pmu.c @@ -54,7 +54,7 @@ * Power7 event codes. */ #define EVENT(_name, _code) \ - PME_##_name = _code, + _name = _code, enum { #include "power7-events-list.h" @@ -318,14 +318,14 @@ static void power7_disable_pmc(unsigned int pmc, unsigned long mmcr[]) } static int power7_generic_events[] = { - [PERF_COUNT_HW_CPU_CYCLES] = PME_PM_CYC, - [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = PME_PM_GCT_NOSLOT_CYC, - [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = PME_PM_CMPLU_STALL, - [PERF_COUNT_HW_INSTRUCTIONS] = PME_PM_INST_CMPL, - [PERF_COUNT_HW_CACHE_REFERENCES] = PME_PM_LD_REF_L1, - [PERF_COUNT_HW_CACHE_MISSES] = PME_PM_LD_MISS_L1, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = PME_PM_BRU_FIN, - [PERF_COUNT_HW_BRANCH_MISSES] = PME_PM_BR_MPRED, + [PERF_COUNT_HW_CPU_CYCLES] = PM_CYC, + [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = PM_GCT_NOSLOT_CYC, + [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = PM_CMPLU_STALL, + [PERF_COUNT_HW_INSTRUCTIONS] = PM_INST_CMPL, + [PERF_COUNT_HW_CACHE_REFERENCES] = PM_LD_REF_L1, + [PERF_COUNT_HW_CACHE_MISSES] = PM_LD_MISS_L1, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = PM_BRU_FIN, + [PERF_COUNT_HW_BRANCH_MISSES] = PM_BR_MPRED, }; #define C(x) PERF_COUNT_HW_CACHE_##x diff --git a/arch/powerpc/perf/power8-events-list.h b/arch/powerpc/perf/power8-events-list.h new file mode 100644 index 000000000000..741b77edd03e --- /dev/null +++ b/arch/powerpc/perf/power8-events-list.h @@ -0,0 +1,51 @@ +/* + * Performance counter support for POWER8 processors. + * + * Copyright 2014 Sukadev Bhattiprolu, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* + * Power8 event codes. + */ +EVENT(PM_CYC, 0x0001e) +EVENT(PM_GCT_NOSLOT_CYC, 0x100f8) +EVENT(PM_CMPLU_STALL, 0x4000a) +EVENT(PM_INST_CMPL, 0x00002) +EVENT(PM_BRU_FIN, 0x10068) +EVENT(PM_BR_MPRED_CMPL, 0x400f6) + +/* All L1 D cache load references counted at finish, gated by reject */ +EVENT(PM_LD_REF_L1, 0x100ee) +/* Load Missed L1 */ +EVENT(PM_LD_MISS_L1, 0x3e054) +/* Store Missed L1 */ +EVENT(PM_ST_MISS_L1, 0x300f0) +/* L1 cache data prefetches */ +EVENT(PM_L1_PREF, 0x0d8b8) +/* Instruction fetches from L1 */ +EVENT(PM_INST_FROM_L1, 0x04080) +/* Demand iCache Miss */ +EVENT(PM_L1_ICACHE_MISS, 0x200fd) +/* Instruction Demand sectors wriittent into IL1 */ +EVENT(PM_L1_DEMAND_WRITE, 0x0408c) +/* Instruction prefetch written into IL1 */ +EVENT(PM_IC_PREF_WRITE, 0x0408e) +/* The data cache was reloaded from local core's L3 due to a demand load */ +EVENT(PM_DATA_FROM_L3, 0x4c042) +/* Demand LD - L3 Miss (not L2 hit and not L3 hit) */ +EVENT(PM_DATA_FROM_L3MISS, 0x300fe) +/* All successful D-side store dispatches for this thread */ +EVENT(PM_L2_ST, 0x17080) +/* All successful D-side store dispatches for this thread that were L2 Miss */ +EVENT(PM_L2_ST_MISS, 0x17082) +/* Total HW L3 prefetches(Load+store) */ +EVENT(PM_L3_PREF_ALL, 0x4e052) +/* Data PTEG reload */ +EVENT(PM_DTLB_MISS, 0x300fc) +/* ITLB Reloaded */ +EVENT(PM_ITLB_MISS, 0x400fc) diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c index 9958ba8bf0d2..690d9186a855 100644 --- a/arch/powerpc/perf/power8-pmu.c +++ b/arch/powerpc/perf/power8-pmu.c @@ -17,48 +17,16 @@ #include <asm/firmware.h> #include <asm/cputable.h> - /* * Some power8 event codes. */ -#define PM_CYC 0x0001e -#define PM_GCT_NOSLOT_CYC 0x100f8 -#define PM_CMPLU_STALL 0x4000a -#define PM_INST_CMPL 0x00002 -#define PM_BRU_FIN 0x10068 -#define PM_BR_MPRED_CMPL 0x400f6 - -/* All L1 D cache load references counted at finish, gated by reject */ -#define PM_LD_REF_L1 0x100ee -/* Load Missed L1 */ -#define PM_LD_MISS_L1 0x3e054 -/* Store Missed L1 */ -#define PM_ST_MISS_L1 0x300f0 -/* L1 cache data prefetches */ -#define PM_L1_PREF 0x0d8b8 -/* Instruction fetches from L1 */ -#define PM_INST_FROM_L1 0x04080 -/* Demand iCache Miss */ -#define PM_L1_ICACHE_MISS 0x200fd -/* Instruction Demand sectors wriittent into IL1 */ -#define PM_L1_DEMAND_WRITE 0x0408c -/* Instruction prefetch written into IL1 */ -#define PM_IC_PREF_WRITE 0x0408e -/* The data cache was reloaded from local core's L3 due to a demand load */ -#define PM_DATA_FROM_L3 0x4c042 -/* Demand LD - L3 Miss (not L2 hit and not L3 hit) */ -#define PM_DATA_FROM_L3MISS 0x300fe -/* All successful D-side store dispatches for this thread */ -#define PM_L2_ST 0x17080 -/* All successful D-side store dispatches for this thread that were L2 Miss */ -#define PM_L2_ST_MISS 0x17082 -/* Total HW L3 prefetches(Load+store) */ -#define PM_L3_PREF_ALL 0x4e052 -/* Data PTEG reload */ -#define PM_DTLB_MISS 0x300fc -/* ITLB Reloaded */ -#define PM_ITLB_MISS 0x400fc +#define EVENT(_name, _code) _name = _code, + +enum { +#include "power8-events-list.h" +}; +#undef EVENT /* * Raw event encoding for POWER8: @@ -415,7 +383,7 @@ static int power8_compute_mmcr(u64 event[], int n_ev, pmc_inuse |= 1 << pmc; } - /* In continous sampling mode, update SDAR on TLB miss */ + /* In continuous sampling mode, update SDAR on TLB miss */ mmcra = MMCRA_SDAR_MODE_TLB; mmcr1 = mmcr2 = 0; @@ -604,6 +572,71 @@ static void power8_disable_pmc(unsigned int pmc, unsigned long mmcr[]) mmcr[1] &= ~(0xffUL << MMCR1_PMCSEL_SHIFT(pmc + 1)); } +GENERIC_EVENT_ATTR(cpu-cycles, PM_CYC); +GENERIC_EVENT_ATTR(stalled-cycles-frontend, PM_GCT_NOSLOT_CYC); +GENERIC_EVENT_ATTR(stalled-cycles-backend, PM_CMPLU_STALL); +GENERIC_EVENT_ATTR(instructions, PM_INST_CMPL); +GENERIC_EVENT_ATTR(branch-instructions, PM_BRU_FIN); +GENERIC_EVENT_ATTR(branch-misses, PM_BR_MPRED_CMPL); +GENERIC_EVENT_ATTR(cache-references, PM_LD_REF_L1); +GENERIC_EVENT_ATTR(cache-misses, PM_LD_MISS_L1); + +CACHE_EVENT_ATTR(L1-dcache-load-misses, PM_LD_MISS_L1); +CACHE_EVENT_ATTR(L1-dcache-loads, PM_LD_REF_L1); + +CACHE_EVENT_ATTR(L1-dcache-prefetches, PM_L1_PREF); +CACHE_EVENT_ATTR(L1-dcache-store-misses, PM_ST_MISS_L1); +CACHE_EVENT_ATTR(L1-icache-load-misses, PM_L1_ICACHE_MISS); +CACHE_EVENT_ATTR(L1-icache-loads, PM_INST_FROM_L1); +CACHE_EVENT_ATTR(L1-icache-prefetches, PM_IC_PREF_WRITE); + +CACHE_EVENT_ATTR(LLC-load-misses, PM_DATA_FROM_L3MISS); +CACHE_EVENT_ATTR(LLC-loads, PM_DATA_FROM_L3); +CACHE_EVENT_ATTR(LLC-prefetches, PM_L3_PREF_ALL); +CACHE_EVENT_ATTR(LLC-store-misses, PM_L2_ST_MISS); +CACHE_EVENT_ATTR(LLC-stores, PM_L2_ST); + +CACHE_EVENT_ATTR(branch-load-misses, PM_BR_MPRED_CMPL); +CACHE_EVENT_ATTR(branch-loads, PM_BRU_FIN); +CACHE_EVENT_ATTR(dTLB-load-misses, PM_DTLB_MISS); +CACHE_EVENT_ATTR(iTLB-load-misses, PM_ITLB_MISS); + +static struct attribute *power8_events_attr[] = { + GENERIC_EVENT_PTR(PM_CYC), + GENERIC_EVENT_PTR(PM_GCT_NOSLOT_CYC), + GENERIC_EVENT_PTR(PM_CMPLU_STALL), + GENERIC_EVENT_PTR(PM_INST_CMPL), + GENERIC_EVENT_PTR(PM_BRU_FIN), + GENERIC_EVENT_PTR(PM_BR_MPRED_CMPL), + GENERIC_EVENT_PTR(PM_LD_REF_L1), + GENERIC_EVENT_PTR(PM_LD_MISS_L1), + + CACHE_EVENT_PTR(PM_LD_MISS_L1), + CACHE_EVENT_PTR(PM_LD_REF_L1), + CACHE_EVENT_PTR(PM_L1_PREF), + CACHE_EVENT_PTR(PM_ST_MISS_L1), + CACHE_EVENT_PTR(PM_L1_ICACHE_MISS), + CACHE_EVENT_PTR(PM_INST_FROM_L1), + CACHE_EVENT_PTR(PM_IC_PREF_WRITE), + CACHE_EVENT_PTR(PM_DATA_FROM_L3MISS), + CACHE_EVENT_PTR(PM_DATA_FROM_L3), + CACHE_EVENT_PTR(PM_L3_PREF_ALL), + CACHE_EVENT_PTR(PM_L2_ST_MISS), + CACHE_EVENT_PTR(PM_L2_ST), + + CACHE_EVENT_PTR(PM_BR_MPRED_CMPL), + CACHE_EVENT_PTR(PM_BRU_FIN), + + CACHE_EVENT_PTR(PM_DTLB_MISS), + CACHE_EVENT_PTR(PM_ITLB_MISS), + NULL +}; + +static struct attribute_group power8_pmu_events_group = { + .name = "events", + .attrs = power8_events_attr, +}; + PMU_FORMAT_ATTR(event, "config:0-49"); PMU_FORMAT_ATTR(pmcxsel, "config:0-7"); PMU_FORMAT_ATTR(mark, "config:8"); @@ -640,6 +673,7 @@ struct attribute_group power8_pmu_format_group = { static const struct attribute_group *power8_pmu_attr_groups[] = { &power8_pmu_format_group, + &power8_pmu_events_group, NULL, }; diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c index 6eb3b2abae90..00282c2b0cae 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c @@ -319,7 +319,7 @@ mpc52xx_pci_setup(struct pci_controller *hose, tmp = in_be32(&pci_regs->gscr); #if 0 - /* Reset the exteral bus ( internal PCI controller is NOT resetted ) */ + /* Reset the exteral bus ( internal PCI controller is NOT reset ) */ /* Not necessary and can be a bad thing if for example the bootloader is displaying a splash screen or ... Just left here for documentation purpose if anyone need it */ diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 97915feffd42..e626461a63bd 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -8,6 +8,7 @@ menuconfig FSL_SOC_BOOKE select FSL_PCI if PCI select SERIAL_8250_EXTENDED if SERIAL_8250 select SERIAL_8250_SHARE_IRQ if SERIAL_8250 + select FSL_CORENET_RCPM if PPC_E500MC default y if FSL_SOC_BOOKE diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 1fe7fb95175a..7bc86dae9517 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -2,6 +2,7 @@ # Makefile for the PowerPC 85xx linux kernel. # obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_FSL_PMC) += mpc85xx_pm_ops.o obj-y += common.o diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c index 949f22c86e61..28720a4ded7b 100644 --- a/arch/powerpc/platforms/85xx/common.c +++ b/arch/powerpc/platforms/85xx/common.c @@ -9,11 +9,14 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <asm/fsl_pm.h> #include <soc/fsl/qe/qe.h> #include <sysdev/cpm2_pic.h> #include "mpc85xx.h" +const struct fsl_pm_ops *qoriq_pm_ops; + static const struct of_device_id mpc85xx_common_ids[] __initconst = { { .type = "soc", }, { .compatible = "soc", }, diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 5ac70de3e48a..d7e87ff912d7 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -99,7 +99,7 @@ static void mpc85xx_cds_restart(char *cmd) pci_read_config_byte(dev, 0x47, &tmp); /* - * At this point, the harware reset should have triggered. + * At this point, the hardware reset should have triggered. * However, if it doesn't work for some mysterious reason, * just fall through to the default reset below. */ diff --git a/arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c b/arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c new file mode 100644 index 000000000000..f05325f0cc03 --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c @@ -0,0 +1,106 @@ +/* + * MPC85xx PM operators + * + * Copyright 2015 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#define pr_fmt(fmt) "%s: " fmt, __func__ + +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/fsl/guts.h> + +#include <asm/io.h> +#include <asm/fsl_pm.h> + +static struct ccsr_guts __iomem *guts; + +static void mpc85xx_irq_mask(int cpu) +{ + +} + +static void mpc85xx_irq_unmask(int cpu) +{ + +} + +static void mpc85xx_cpu_die(int cpu) +{ + u32 tmp; + + tmp = (mfspr(SPRN_HID0) & ~(HID0_DOZE|HID0_SLEEP)) | HID0_NAP; + mtspr(SPRN_HID0, tmp); + + /* Enter NAP mode. */ + tmp = mfmsr(); + tmp |= MSR_WE; + asm volatile( + "msync\n" + "mtmsr %0\n" + "isync\n" + : + : "r" (tmp)); +} + +static void mpc85xx_cpu_up_prepare(int cpu) +{ + +} + +static void mpc85xx_freeze_time_base(bool freeze) +{ + uint32_t mask; + + mask = CCSR_GUTS_DEVDISR_TB0 | CCSR_GUTS_DEVDISR_TB1; + if (freeze) + setbits32(&guts->devdisr, mask); + else + clrbits32(&guts->devdisr, mask); + + in_be32(&guts->devdisr); +} + +static const struct of_device_id mpc85xx_smp_guts_ids[] = { + { .compatible = "fsl,mpc8572-guts", }, + { .compatible = "fsl,p1020-guts", }, + { .compatible = "fsl,p1021-guts", }, + { .compatible = "fsl,p1022-guts", }, + { .compatible = "fsl,p1023-guts", }, + { .compatible = "fsl,p2020-guts", }, + { .compatible = "fsl,bsc9132-guts", }, + {}, +}; + +static const struct fsl_pm_ops mpc85xx_pm_ops = { + .freeze_time_base = mpc85xx_freeze_time_base, + .irq_mask = mpc85xx_irq_mask, + .irq_unmask = mpc85xx_irq_unmask, + .cpu_die = mpc85xx_cpu_die, + .cpu_up_prepare = mpc85xx_cpu_up_prepare, +}; + +int __init mpc85xx_setup_pmc(void) +{ + struct device_node *np; + + np = of_find_matching_node(NULL, mpc85xx_smp_guts_ids); + if (np) { + guts = of_iomap(np, 0); + of_node_put(np); + if (!guts) { + pr_err("Could not map guts node address\n"); + return -ENOMEM; + } + } + + qoriq_pm_ops = &mpc85xx_pm_ops; + + return 0; +} diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index 6b107cea1c08..fe9f19e5e935 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -2,7 +2,7 @@ * Author: Andy Fleming <afleming@freescale.com> * Kumar Gala <galak@kernel.crashing.org> * - * Copyright 2006-2008, 2011-2012 Freescale Semiconductor Inc. + * Copyright 2006-2008, 2011-2012, 2015 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -15,7 +15,6 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/of.h> -#include <linux/of_address.h> #include <linux/kexec.h> #include <linux/highmem.h> #include <linux/cpu.h> @@ -29,6 +28,7 @@ #include <asm/dbell.h> #include <asm/code-patching.h> #include <asm/cputhreads.h> +#include <asm/fsl_pm.h> #include <sysdev/fsl_soc.h> #include <sysdev/mpic.h> @@ -43,35 +43,23 @@ struct epapr_spin_table { u32 pir; }; -static struct ccsr_guts __iomem *guts; +#ifdef CONFIG_HOTPLUG_CPU static u64 timebase; static int tb_req; static int tb_valid; -static void mpc85xx_timebase_freeze(int freeze) -{ - uint32_t mask; - - mask = CCSR_GUTS_DEVDISR_TB0 | CCSR_GUTS_DEVDISR_TB1; - if (freeze) - setbits32(&guts->devdisr, mask); - else - clrbits32(&guts->devdisr, mask); - - in_be32(&guts->devdisr); -} - static void mpc85xx_give_timebase(void) { unsigned long flags; local_irq_save(flags); + hard_irq_disable(); while (!tb_req) barrier(); tb_req = 0; - mpc85xx_timebase_freeze(1); + qoriq_pm_ops->freeze_time_base(true); #ifdef CONFIG_PPC64 /* * e5500/e6500 have a workaround for erratum A-006958 in place @@ -104,7 +92,7 @@ static void mpc85xx_give_timebase(void) while (tb_valid) barrier(); - mpc85xx_timebase_freeze(0); + qoriq_pm_ops->freeze_time_base(false); local_irq_restore(flags); } @@ -114,6 +102,7 @@ static void mpc85xx_take_timebase(void) unsigned long flags; local_irq_save(flags); + hard_irq_disable(); tb_req = 1; while (!tb_valid) @@ -126,36 +115,54 @@ static void mpc85xx_take_timebase(void) local_irq_restore(flags); } -#ifdef CONFIG_HOTPLUG_CPU static void smp_85xx_mach_cpu_die(void) { unsigned int cpu = smp_processor_id(); - u32 tmp; local_irq_disable(); + hard_irq_disable(); + /* mask all irqs to prevent cpu wakeup */ + qoriq_pm_ops->irq_mask(cpu); + idle_task_exit(); - generic_set_cpu_dead(cpu); - mb(); mtspr(SPRN_TCR, 0); + mtspr(SPRN_TSR, mfspr(SPRN_TSR)); - __flush_disable_L1(); - tmp = (mfspr(SPRN_HID0) & ~(HID0_DOZE|HID0_SLEEP)) | HID0_NAP; - mtspr(SPRN_HID0, tmp); - isync(); + generic_set_cpu_dead(cpu); - /* Enter NAP mode. */ - tmp = mfmsr(); - tmp |= MSR_WE; - mb(); - mtmsr(tmp); - isync(); + cur_cpu_spec->cpu_down_flush(); + + qoriq_pm_ops->cpu_die(cpu); while (1) ; } + +static void qoriq_cpu_kill(unsigned int cpu) +{ + int i; + + for (i = 0; i < 500; i++) { + if (is_cpu_dead(cpu)) { +#ifdef CONFIG_PPC64 + paca[cpu].cpu_start = 0; +#endif + return; + } + msleep(20); + } + pr_err("CPU%d didn't die...\n", cpu); +} #endif +/* + * To keep it compatible with old boot program which uses + * cache-inhibit spin table, we need to flush the cache + * before accessing spin table to invalidate any staled data. + * We also need to flush the cache after writing to spin + * table to push data out. + */ static inline void flush_spin_table(void *spin_table) { flush_dcache_range((ulong)spin_table, @@ -173,78 +180,28 @@ static inline u32 read_spin_table_addr_l(void *spin_table) static void wake_hw_thread(void *info) { void fsl_secondary_thread_init(void); - unsigned long imsr, inia; - int nr = *(const int *)info; + unsigned long inia; + int cpu = *(const int *)info; - imsr = MSR_KERNEL; inia = *(unsigned long *)fsl_secondary_thread_init; - - if (cpu_thread_in_core(nr) == 0) { - /* For when we boot on a secondary thread with kdump */ - mttmr(TMRN_IMSR0, imsr); - mttmr(TMRN_INIA0, inia); - mtspr(SPRN_TENS, TEN_THREAD(0)); - } else { - mttmr(TMRN_IMSR1, imsr); - mttmr(TMRN_INIA1, inia); - mtspr(SPRN_TENS, TEN_THREAD(1)); - } - - smp_generic_kick_cpu(nr); + book3e_start_thread(cpu_thread_in_core(cpu), inia); } #endif -static int smp_85xx_kick_cpu(int nr) +static int smp_85xx_start_cpu(int cpu) { - unsigned long flags; - const u64 *cpu_rel_addr; - __iomem struct epapr_spin_table *spin_table; + int ret = 0; struct device_node *np; - int hw_cpu = get_hard_smp_processor_id(nr); + const u64 *cpu_rel_addr; + unsigned long flags; int ioremappable; - int ret = 0; - - WARN_ON(nr < 0 || nr >= NR_CPUS); - WARN_ON(hw_cpu < 0 || hw_cpu >= NR_CPUS); - - pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr); - -#ifdef CONFIG_PPC64 - /* Threads don't use the spin table */ - if (cpu_thread_in_core(nr) != 0) { - int primary = cpu_first_thread_sibling(nr); - - if (WARN_ON_ONCE(!cpu_has_feature(CPU_FTR_SMT))) - return -ENOENT; - - if (cpu_thread_in_core(nr) != 1) { - pr_err("%s: cpu %d: invalid hw thread %d\n", - __func__, nr, cpu_thread_in_core(nr)); - return -ENOENT; - } + int hw_cpu = get_hard_smp_processor_id(cpu); + struct epapr_spin_table __iomem *spin_table; - if (!cpu_online(primary)) { - pr_err("%s: cpu %d: primary %d not online\n", - __func__, nr, primary); - return -ENOENT; - } - - smp_call_function_single(primary, wake_hw_thread, &nr, 0); - return 0; - } else if (cpu_thread_in_core(boot_cpuid) != 0 && - cpu_first_thread_sibling(boot_cpuid) == nr) { - if (WARN_ON_ONCE(!cpu_has_feature(CPU_FTR_SMT))) - return -ENOENT; - - smp_call_function_single(boot_cpuid, wake_hw_thread, &nr, 0); - } -#endif - - np = of_get_cpu_node(nr, NULL); + np = of_get_cpu_node(cpu, NULL); cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL); - - if (cpu_rel_addr == NULL) { - printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr); + if (!cpu_rel_addr) { + pr_err("No cpu-release-addr for cpu %d\n", cpu); return -ENOENT; } @@ -264,28 +221,18 @@ static int smp_85xx_kick_cpu(int nr) spin_table = phys_to_virt(*cpu_rel_addr); local_irq_save(flags); -#ifdef CONFIG_PPC32 -#ifdef CONFIG_HOTPLUG_CPU - /* Corresponding to generic_set_cpu_dead() */ - generic_set_cpu_up(nr); + hard_irq_disable(); - if (system_state == SYSTEM_RUNNING) { - /* - * To keep it compatible with old boot program which uses - * cache-inhibit spin table, we need to flush the cache - * before accessing spin table to invalidate any staled data. - * We also need to flush the cache after writing to spin - * table to push data out. - */ - flush_spin_table(spin_table); - out_be32(&spin_table->addr_l, 0); - flush_spin_table(spin_table); + if (qoriq_pm_ops) + qoriq_pm_ops->cpu_up_prepare(cpu); + /* if cpu is not spinning, reset it */ + if (read_spin_table_addr_l(spin_table) != 1) { /* * We don't set the BPTR register here since it already points * to the boot page properly. */ - mpic_reset_core(nr); + mpic_reset_core(cpu); /* * wait until core is ready... @@ -295,40 +242,23 @@ static int smp_85xx_kick_cpu(int nr) if (!spin_event_timeout( read_spin_table_addr_l(spin_table) == 1, 10000, 100)) { - pr_err("%s: timeout waiting for core %d to reset\n", - __func__, hw_cpu); - ret = -ENOENT; - goto out; + pr_err("timeout waiting for cpu %d to reset\n", + hw_cpu); + ret = -EAGAIN; + goto err; } - - /* clear the acknowledge status */ - __secondary_hold_acknowledge = -1; } -#endif - flush_spin_table(spin_table); - out_be32(&spin_table->pir, hw_cpu); - out_be32(&spin_table->addr_l, __pa(__early_start)); - flush_spin_table(spin_table); - - /* Wait a bit for the CPU to ack. */ - if (!spin_event_timeout(__secondary_hold_acknowledge == hw_cpu, - 10000, 100)) { - pr_err("%s: timeout waiting for core %d to ack\n", - __func__, hw_cpu); - ret = -ENOENT; - goto out; - } -out: -#else - smp_generic_kick_cpu(nr); flush_spin_table(spin_table); out_be32(&spin_table->pir, hw_cpu); +#ifdef CONFIG_PPC64 out_be64((u64 *)(&spin_table->addr_h), __pa(ppc_function_entry(generic_secondary_smp_init))); - flush_spin_table(spin_table); +#else + out_be32(&spin_table->addr_l, __pa(__early_start)); #endif - + flush_spin_table(spin_table); +err: local_irq_restore(flags); if (ioremappable) @@ -337,6 +267,81 @@ out: return ret; } +static int smp_85xx_kick_cpu(int nr) +{ + int ret = 0; +#ifdef CONFIG_PPC64 + int primary = nr; +#endif + + WARN_ON(nr < 0 || nr >= num_possible_cpus()); + + pr_debug("kick CPU #%d\n", nr); + +#ifdef CONFIG_PPC64 + if (threads_per_core == 2) { + if (WARN_ON_ONCE(!cpu_has_feature(CPU_FTR_SMT))) + return -ENOENT; + + booting_thread_hwid = cpu_thread_in_core(nr); + primary = cpu_first_thread_sibling(nr); + + if (qoriq_pm_ops) + qoriq_pm_ops->cpu_up_prepare(nr); + + /* + * If either thread in the core is online, use it to start + * the other. + */ + if (cpu_online(primary)) { + smp_call_function_single(primary, + wake_hw_thread, &nr, 1); + goto done; + } else if (cpu_online(primary + 1)) { + smp_call_function_single(primary + 1, + wake_hw_thread, &nr, 1); + goto done; + } + + /* + * If getting here, it means both threads in the core are + * offline. So start the primary thread, then it will start + * the thread specified in booting_thread_hwid, the one + * corresponding to nr. + */ + + } else if (threads_per_core == 1) { + /* + * If one core has only one thread, set booting_thread_hwid to + * an invalid value. + */ + booting_thread_hwid = INVALID_THREAD_HWID; + + } else if (threads_per_core > 2) { + pr_err("Do not support more than 2 threads per CPU."); + return -EINVAL; + } + + ret = smp_85xx_start_cpu(primary); + if (ret) + return ret; + +done: + paca[nr].cpu_start = 1; + generic_set_cpu_up(nr); + + return ret; +#else + ret = smp_85xx_start_cpu(nr); + if (ret) + return ret; + + generic_set_cpu_up(nr); + + return ret; +#endif +} + struct smp_ops_t smp_85xx_ops = { .kick_cpu = smp_85xx_kick_cpu, .cpu_bootable = smp_generic_cpu_bootable, @@ -359,7 +364,7 @@ void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary) local_irq_disable(); if (secondary) { - __flush_disable_L1(); + cur_cpu_spec->cpu_down_flush(); atomic_inc(&kexec_down_cpus); /* loop forever */ while (1); @@ -467,16 +472,6 @@ static void smp_85xx_setup_cpu(int cpu_nr) smp_85xx_basic_setup(cpu_nr); } -static const struct of_device_id mpc85xx_smp_guts_ids[] = { - { .compatible = "fsl,mpc8572-guts", }, - { .compatible = "fsl,p1020-guts", }, - { .compatible = "fsl,p1021-guts", }, - { .compatible = "fsl,p1022-guts", }, - { .compatible = "fsl,p1023-guts", }, - { .compatible = "fsl,p2020-guts", }, - {}, -}; - void __init mpc85xx_smp_init(void) { struct device_node *np; @@ -500,22 +495,21 @@ void __init mpc85xx_smp_init(void) smp_85xx_ops.probe = NULL; } - np = of_find_matching_node(NULL, mpc85xx_smp_guts_ids); - if (np) { - guts = of_iomap(np, 0); - of_node_put(np); - if (!guts) { - pr_err("%s: Could not map guts node address\n", - __func__); - return; - } +#ifdef CONFIG_HOTPLUG_CPU +#ifdef CONFIG_FSL_CORENET_RCPM + fsl_rcpm_init(); +#endif + +#ifdef CONFIG_FSL_PMC + mpc85xx_setup_pmc(); +#endif + if (qoriq_pm_ops) { smp_85xx_ops.give_timebase = mpc85xx_give_timebase; smp_85xx_ops.take_timebase = mpc85xx_take_timebase; -#ifdef CONFIG_HOTPLUG_CPU ppc_md.cpu_die = smp_85xx_mach_cpu_die; -#endif + smp_85xx_ops.cpu_die = qoriq_cpu_kill; } - +#endif smp_ops = &smp_85xx_ops; #ifdef CONFIG_KEXEC diff --git a/arch/powerpc/platforms/85xx/smp.h b/arch/powerpc/platforms/85xx/smp.h index e2b44933ff19..0b20ae315c53 100644 --- a/arch/powerpc/platforms/85xx/smp.h +++ b/arch/powerpc/platforms/85xx/smp.h @@ -5,6 +5,7 @@ #ifdef CONFIG_SMP void __init mpc85xx_smp_init(void); +int __init mpc85xx_setup_pmc(void); #else static inline void mpc85xx_smp_init(void) { diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile index ede815d6489d..2d889ad7dc89 100644 --- a/arch/powerpc/platforms/86xx/Makefile +++ b/arch/powerpc/platforms/86xx/Makefile @@ -2,7 +2,7 @@ # Makefile for the PowerPC 86xx linux kernel. # -obj-y := pic.o +obj-y := pic.o common.o obj-$(CONFIG_SMP) += mpc86xx_smp.o obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o obj-$(CONFIG_SBC8641D) += sbc8641d.o diff --git a/arch/powerpc/platforms/86xx/common.c b/arch/powerpc/platforms/86xx/common.c new file mode 100644 index 000000000000..0f7b7fcf1ba2 --- /dev/null +++ b/arch/powerpc/platforms/86xx/common.c @@ -0,0 +1,43 @@ +/* + * Routines common to most mpc86xx-based boards. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/of_platform.h> +#include <asm/synch.h> + +#include "mpc86xx.h" + +static const struct of_device_id mpc86xx_common_ids[] __initconst = { + { .type = "soc", }, + { .compatible = "soc", }, + { .compatible = "simple-bus", }, + { .name = "localbus", }, + { .compatible = "gianfar", }, + { .compatible = "fsl,mpc8641-pcie", }, + {}, +}; + +int __init mpc86xx_common_publish_devices(void) +{ + return of_platform_bus_probe(NULL, mpc86xx_common_ids, NULL); +} + +long __init mpc86xx_time_init(void) +{ + unsigned int temp; + + /* Set the time base to zero */ + mtspr(SPRN_TBWL, 0); + mtspr(SPRN_TBWU, 0); + + temp = mfspr(SPRN_HID0); + temp |= HID0_TBEN; + mtspr(SPRN_HID0, temp); + isync(); + + return 0; +} diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c index bf17933b20f3..8e63b752712c 100644 --- a/arch/powerpc/platforms/86xx/gef_ppc9a.c +++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c @@ -197,37 +197,7 @@ static int __init gef_ppc9a_probe(void) return 0; } -static long __init mpc86xx_time_init(void) -{ - unsigned int temp; - - /* Set the time base to zero */ - mtspr(SPRN_TBWL, 0); - mtspr(SPRN_TBWU, 0); - - temp = mfspr(SPRN_HID0); - temp |= HID0_TBEN; - mtspr(SPRN_HID0, temp); - asm volatile("isync"); - - return 0; -} - -static const struct of_device_id of_bus_ids[] __initconst = { - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - { .compatible = "fsl,mpc8641-pcie", }, - {}, -}; - -static int __init declare_of_platform_devices(void) -{ - printk(KERN_DEBUG "Probe platform devices\n"); - of_platform_bus_probe(NULL, of_bus_ids, NULL); - - return 0; -} -machine_arch_initcall(gef_ppc9a, declare_of_platform_devices); +machine_arch_initcall(gef_ppc9a, mpc86xx_common_publish_devices); define_machine(gef_ppc9a) { .name = "GE PPC9A", diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c index 8facf5873866..0e0be94f551f 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc310.c +++ b/arch/powerpc/platforms/86xx/gef_sbc310.c @@ -184,37 +184,7 @@ static int __init gef_sbc310_probe(void) return 0; } -static long __init mpc86xx_time_init(void) -{ - unsigned int temp; - - /* Set the time base to zero */ - mtspr(SPRN_TBWL, 0); - mtspr(SPRN_TBWU, 0); - - temp = mfspr(SPRN_HID0); - temp |= HID0_TBEN; - mtspr(SPRN_HID0, temp); - asm volatile("isync"); - - return 0; -} - -static const struct of_device_id of_bus_ids[] __initconst = { - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - { .compatible = "fsl,mpc8641-pcie", }, - {}, -}; - -static int __init declare_of_platform_devices(void) -{ - printk(KERN_DEBUG "Probe platform devices\n"); - of_platform_bus_probe(NULL, of_bus_ids, NULL); - - return 0; -} -machine_arch_initcall(gef_sbc310, declare_of_platform_devices); +machine_arch_initcall(gef_sbc310, mpc86xx_common_publish_devices); define_machine(gef_sbc310) { .name = "GE SBC310", diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c index 8c9058df5642..e8292b492d7e 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc610.c +++ b/arch/powerpc/platforms/86xx/gef_sbc610.c @@ -174,37 +174,7 @@ static int __init gef_sbc610_probe(void) return 0; } -static long __init mpc86xx_time_init(void) -{ - unsigned int temp; - - /* Set the time base to zero */ - mtspr(SPRN_TBWL, 0); - mtspr(SPRN_TBWU, 0); - - temp = mfspr(SPRN_HID0); - temp |= HID0_TBEN; - mtspr(SPRN_HID0, temp); - asm volatile("isync"); - - return 0; -} - -static const struct of_device_id of_bus_ids[] __initconst = { - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - { .compatible = "fsl,mpc8641-pcie", }, - {}, -}; - -static int __init declare_of_platform_devices(void) -{ - printk(KERN_DEBUG "Probe platform devices\n"); - of_platform_bus_probe(NULL, of_bus_ids, NULL); - - return 0; -} -machine_arch_initcall(gef_sbc610, declare_of_platform_devices); +machine_arch_initcall(gef_sbc610, mpc86xx_common_publish_devices); define_machine(gef_sbc610) { .name = "GE SBC610", diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index 437a9c372ae1..957473e5c8e5 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -88,12 +88,10 @@ static inline void mpc8610_suspend_init(void) { } static const struct of_device_id mpc8610_ids[] __initconst = { { .compatible = "fsl,mpc8610-immr", }, { .compatible = "fsl,mpc8610-guts", }, - { .compatible = "simple-bus", }, /* So that the DMA channel nodes can be probed individually: */ { .compatible = "fsl,eloplus-dma", }, /* PCI controllers */ { .compatible = "fsl,mpc8610-pci", }, - { .compatible = "fsl,mpc8641-pcie", }, {} }; @@ -105,6 +103,8 @@ static int __init mpc8610_declare_of_platform_devices(void) /* Enable wakeup on PIXIS' event IRQ. */ mpc8610_suspend_init(); + mpc86xx_common_publish_devices(); + /* Without this call, the SSI device driver won't get probed. */ of_platform_bus_probe(NULL, mpc8610_ids, NULL); @@ -327,22 +327,6 @@ static int __init mpc86xx_hpcd_probe(void) return 0; } -static long __init mpc86xx_time_init(void) -{ - unsigned int temp; - - /* Set the time base to zero */ - mtspr(SPRN_TBWL, 0); - mtspr(SPRN_TBWU, 0); - - temp = mfspr(SPRN_HID0); - temp |= HID0_TBEN; - mtspr(SPRN_HID0, temp); - asm volatile("isync"); - - return 0; -} - define_machine(mpc86xx_hpcd) { .name = "MPC86xx HPCD", .probe = mpc86xx_hpcd_probe, diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h b/arch/powerpc/platforms/86xx/mpc86xx.h index 08efb57559d1..53500db6b644 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx.h +++ b/arch/powerpc/platforms/86xx/mpc86xx.h @@ -17,5 +17,7 @@ extern void mpc86xx_smp_init(void); extern void mpc86xx_init_irq(void); +extern long mpc86xx_time_init(void); +extern int mpc86xx_common_publish_devices(void); #endif /* __MPC86XX_H__ */ diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index 07ccb1b0cc7d..e5084811b9c6 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -110,33 +110,14 @@ static int __init mpc86xx_hpcn_probe(void) return 0; } -static long __init -mpc86xx_time_init(void) -{ - unsigned int temp; - - /* Set the time base to zero */ - mtspr(SPRN_TBWL, 0); - mtspr(SPRN_TBWU, 0); - - temp = mfspr(SPRN_HID0); - temp |= HID0_TBEN; - mtspr(SPRN_HID0, temp); - asm volatile("isync"); - - return 0; -} - static const struct of_device_id of_bus_ids[] __initconst = { - { .compatible = "simple-bus", }, { .compatible = "fsl,srio", }, - { .compatible = "gianfar", }, - { .compatible = "fsl,mpc8641-pcie", }, {}, }; static int __init declare_of_platform_devices(void) { + mpc86xx_common_publish_devices(); of_platform_bus_probe(NULL, of_bus_ids, NULL); return 0; diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c index 6810b71d54a7..2a9cf278c12a 100644 --- a/arch/powerpc/platforms/86xx/sbc8641d.c +++ b/arch/powerpc/platforms/86xx/sbc8641d.c @@ -75,37 +75,7 @@ static int __init sbc8641_probe(void) return 0; } -static long __init -mpc86xx_time_init(void) -{ - unsigned int temp; - - /* Set the time base to zero */ - mtspr(SPRN_TBWL, 0); - mtspr(SPRN_TBWU, 0); - - temp = mfspr(SPRN_HID0); - temp |= HID0_TBEN; - mtspr(SPRN_HID0, temp); - asm volatile("isync"); - - return 0; -} - -static const struct of_device_id of_bus_ids[] __initconst = { - { .compatible = "simple-bus", }, - { .compatible = "gianfar", }, - { .compatible = "fsl,mpc8641-pcie", }, - {}, -}; - -static int __init declare_of_platform_devices(void) -{ - of_platform_bus_probe(NULL, of_bus_ids, NULL); - - return 0; -} -machine_arch_initcall(sbc8641, declare_of_platform_devices); +machine_arch_initcall(sbc8641, mpc86xx_common_publish_devices); define_machine(sbc8641) { .name = "SBC8641D", diff --git a/arch/powerpc/platforms/embedded6xx/mpc10x.h b/arch/powerpc/platforms/embedded6xx/mpc10x.h index b290b63661f1..5ad12023e562 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc10x.h +++ b/arch/powerpc/platforms/embedded6xx/mpc10x.h @@ -24,13 +24,11 @@ * Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff * Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff * PCI MEM: 0x80000000 -> Processor System Memory: 0x00000000 - * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB) * * MAP B (CHRP Map) * Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff * Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff * PCI MEM: 0x00000000 -> Processor System Memory: 0x00000000 - * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB) */ /* @@ -138,14 +136,6 @@ #define MPC10X_EUMB_WP_OFFSET 0x000ff000 /* Data path diagnostic, watchpoint reg offset */ #define MPC10X_EUMB_WP_SIZE 0x00001000 /* Data path diagnostic, watchpoint reg size */ -/* - * Define some recommended places to put the EUMB regs. - * For both maps, recommend putting the EUMB from 0xeff00000 to 0xefffffff. - */ -extern unsigned long ioremap_base; -#define MPC10X_MAPA_EUMB_BASE (ioremap_base - MPC10X_EUMB_SIZE) -#define MPC10X_MAPB_EUMB_BASE MPC10X_MAPA_EUMB_BASE - enum ppc_sys_devices { MPC10X_IIC1, MPC10X_DMA0, diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index 52c6ce1cc985..1eb7b45e017d 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -2,7 +2,7 @@ CFLAGS_bootx_init.o += -fPIC ifdef CONFIG_FUNCTION_TRACER # Do not trace early boot code -CFLAGS_REMOVE_bootx_init.o = -pg -mno-sched-epilog +CFLAGS_REMOVE_bootx_init.o = -mno-sched-epilog $(CC_FLAGS_FTRACE) endif obj-y += pic.o setup.o time.o feature.o pci.o \ diff --git a/arch/powerpc/platforms/powermac/cache.S b/arch/powerpc/platforms/powermac/cache.S index 6be1a4af3359..cc5347eb1662 100644 --- a/arch/powerpc/platforms/powermac/cache.S +++ b/arch/powerpc/platforms/powermac/cache.S @@ -23,7 +23,7 @@ * when going to sleep, when doing a PMU based cpufreq transition, * or when "offlining" a CPU on SMP machines. This code is over * paranoid, but I've had enough issues with various CPU revs and - * bugs that I decided it was worth beeing over cautious + * bugs that I decided it was worth being over cautious */ _GLOBAL(flush_disable_caches) diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 4882bfd90e27..1e02328c3f2d 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -198,7 +198,7 @@ static long ohare_htw_scc_enable(struct device_node *node, long param, if (htw) { /* Side effect: this will also power up the * modem, but it's too messy to figure out on which - * ports this controls the tranceiver and on which + * ports this controls the transceiver and on which * it controls the modem */ if (trans) @@ -463,7 +463,7 @@ static long heathrow_sound_enable(struct device_node *node, long param, unsigned long flags; /* B&W G3 and Yikes don't support that properly (the - * sound appear to never come back after beeing shut down). + * sound appear to never come back after being shut down). */ if (pmac_mb.model_id == PMAC_TYPE_YOSEMITE || pmac_mb.model_id == PMAC_TYPE_YIKES) @@ -2770,7 +2770,7 @@ set_initial_features(void) * but I'm not too sure it was audited for side-effects on other * ohare based machines... * Since I still have difficulties figuring the right way to - * differenciate them all and since that hack was there for a long + * differentiate them all and since that hack was there for a long * time, I'll keep it around */ if (macio_chips[0].type == macio_ohare) { diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile index f1516b5ecec9..cd9711e72df6 100644 --- a/arch/powerpc/platforms/powernv/Makefile +++ b/arch/powerpc/platforms/powernv/Makefile @@ -5,7 +5,7 @@ obj-y += opal-msglog.o opal-hmi.o opal-power.o opal-irqchip.o obj-y += opal-kmsg.o obj-$(CONFIG_SMP) += smp.o subcore.o subcore-asm.o -obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o pci-ioda.o npu-dma.o +obj-$(CONFIG_PCI) += pci.o pci-ioda.o npu-dma.o obj-$(CONFIG_EEH) += eeh-powernv.o obj-$(CONFIG_PPC_SCOM) += opal-xscom.o obj-$(CONFIG_MEMORY_FAILURE) += opal-memory-errors.o diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c index 87f47e55aab6..950b3e539057 100644 --- a/arch/powerpc/platforms/powernv/eeh-powernv.c +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c @@ -167,42 +167,26 @@ static int pnv_eeh_dbgfs_get(void *data, int offset, u64 *val) return 0; } -static int pnv_eeh_outb_dbgfs_set(void *data, u64 val) -{ - return pnv_eeh_dbgfs_set(data, 0xD10, val); -} - -static int pnv_eeh_outb_dbgfs_get(void *data, u64 *val) -{ - return pnv_eeh_dbgfs_get(data, 0xD10, val); -} - -static int pnv_eeh_inbA_dbgfs_set(void *data, u64 val) -{ - return pnv_eeh_dbgfs_set(data, 0xD90, val); -} - -static int pnv_eeh_inbA_dbgfs_get(void *data, u64 *val) -{ - return pnv_eeh_dbgfs_get(data, 0xD90, val); -} - -static int pnv_eeh_inbB_dbgfs_set(void *data, u64 val) -{ - return pnv_eeh_dbgfs_set(data, 0xE10, val); -} +#define PNV_EEH_DBGFS_ENTRY(name, reg) \ +static int pnv_eeh_dbgfs_set_##name(void *data, u64 val) \ +{ \ + return pnv_eeh_dbgfs_set(data, reg, val); \ +} \ + \ +static int pnv_eeh_dbgfs_get_##name(void *data, u64 *val) \ +{ \ + return pnv_eeh_dbgfs_get(data, reg, val); \ +} \ + \ +DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_dbgfs_ops_##name, \ + pnv_eeh_dbgfs_get_##name, \ + pnv_eeh_dbgfs_set_##name, \ + "0x%llx\n") + +PNV_EEH_DBGFS_ENTRY(outb, 0xD10); +PNV_EEH_DBGFS_ENTRY(inbA, 0xD90); +PNV_EEH_DBGFS_ENTRY(inbB, 0xE10); -static int pnv_eeh_inbB_dbgfs_get(void *data, u64 *val) -{ - return pnv_eeh_dbgfs_get(data, 0xE10, val); -} - -DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_outb_dbgfs_ops, pnv_eeh_outb_dbgfs_get, - pnv_eeh_outb_dbgfs_set, "0x%llx\n"); -DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_inbA_dbgfs_ops, pnv_eeh_inbA_dbgfs_get, - pnv_eeh_inbA_dbgfs_set, "0x%llx\n"); -DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_inbB_dbgfs_ops, pnv_eeh_inbB_dbgfs_get, - pnv_eeh_inbB_dbgfs_set, "0x%llx\n"); #endif /* CONFIG_DEBUG_FS */ /** @@ -268,13 +252,13 @@ static int pnv_eeh_post_init(void) debugfs_create_file("err_injct_outbound", 0600, phb->dbgfs, hose, - &pnv_eeh_outb_dbgfs_ops); + &pnv_eeh_dbgfs_ops_outb); debugfs_create_file("err_injct_inboundA", 0600, phb->dbgfs, hose, - &pnv_eeh_inbA_dbgfs_ops); + &pnv_eeh_dbgfs_ops_inbA); debugfs_create_file("err_injct_inboundB", 0600, phb->dbgfs, hose, - &pnv_eeh_inbB_dbgfs_ops); + &pnv_eeh_dbgfs_ops_inbB); #endif /* CONFIG_DEBUG_FS */ } @@ -387,6 +371,7 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data) edev->mode &= 0xFFFFFF00; edev->pcix_cap = pnv_eeh_find_cap(pdn, PCI_CAP_ID_PCIX); edev->pcie_cap = pnv_eeh_find_cap(pdn, PCI_CAP_ID_EXP); + edev->af_cap = pnv_eeh_find_cap(pdn, PCI_CAP_ID_AF); edev->aer_cap = pnv_eeh_find_ecap(pdn, PCI_EXT_CAP_ID_ERR); if ((edev->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) { edev->mode |= EEH_DEV_BRIDGE; @@ -895,6 +880,120 @@ void pnv_pci_reset_secondary_bus(struct pci_dev *dev) } } +static void pnv_eeh_wait_for_pending(struct pci_dn *pdn, const char *type, + int pos, u16 mask) +{ + struct eeh_dev *edev = pdn_to_eeh_dev(pdn); + int i, status = 0; + + /* Wait for Transaction Pending bit to be cleared */ + for (i = 0; i < 4; i++) { + eeh_ops->read_config(pdn, pos, 2, &status); + if (!(status & mask)) + return; + + msleep((1 << i) * 100); + } + + pr_warn("%s: Pending transaction while issuing %sFLR to %04x:%02x:%02x.%01x\n", + __func__, type, + edev->phb->global_number, pdn->busno, + PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn)); +} + +static int pnv_eeh_do_flr(struct pci_dn *pdn, int option) +{ + struct eeh_dev *edev = pdn_to_eeh_dev(pdn); + u32 reg = 0; + + if (WARN_ON(!edev->pcie_cap)) + return -ENOTTY; + + eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCAP, 4, ®); + if (!(reg & PCI_EXP_DEVCAP_FLR)) + return -ENOTTY; + + switch (option) { + case EEH_RESET_HOT: + case EEH_RESET_FUNDAMENTAL: + pnv_eeh_wait_for_pending(pdn, "", + edev->pcie_cap + PCI_EXP_DEVSTA, + PCI_EXP_DEVSTA_TRPND); + eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL, + 4, ®); + reg |= PCI_EXP_DEVCTL_BCR_FLR; + eeh_ops->write_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL, + 4, reg); + msleep(EEH_PE_RST_HOLD_TIME); + break; + case EEH_RESET_DEACTIVATE: + eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL, + 4, ®); + reg &= ~PCI_EXP_DEVCTL_BCR_FLR; + eeh_ops->write_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL, + 4, reg); + msleep(EEH_PE_RST_SETTLE_TIME); + break; + } + + return 0; +} + +static int pnv_eeh_do_af_flr(struct pci_dn *pdn, int option) +{ + struct eeh_dev *edev = pdn_to_eeh_dev(pdn); + u32 cap = 0; + + if (WARN_ON(!edev->af_cap)) + return -ENOTTY; + + eeh_ops->read_config(pdn, edev->af_cap + PCI_AF_CAP, 1, &cap); + if (!(cap & PCI_AF_CAP_TP) || !(cap & PCI_AF_CAP_FLR)) + return -ENOTTY; + + switch (option) { + case EEH_RESET_HOT: + case EEH_RESET_FUNDAMENTAL: + /* + * Wait for Transaction Pending bit to clear. A word-aligned + * test is used, so we use the conrol offset rather than status + * and shift the test bit to match. + */ + pnv_eeh_wait_for_pending(pdn, "AF", + edev->af_cap + PCI_AF_CTRL, + PCI_AF_STATUS_TP << 8); + eeh_ops->write_config(pdn, edev->af_cap + PCI_AF_CTRL, + 1, PCI_AF_CTRL_FLR); + msleep(EEH_PE_RST_HOLD_TIME); + break; + case EEH_RESET_DEACTIVATE: + eeh_ops->write_config(pdn, edev->af_cap + PCI_AF_CTRL, 1, 0); + msleep(EEH_PE_RST_SETTLE_TIME); + break; + } + + return 0; +} + +static int pnv_eeh_reset_vf_pe(struct eeh_pe *pe, int option) +{ + struct eeh_dev *edev; + struct pci_dn *pdn; + int ret; + + /* The VF PE should have only one child device */ + edev = list_first_entry_or_null(&pe->edevs, struct eeh_dev, list); + pdn = eeh_dev_to_pdn(edev); + if (!pdn) + return -ENXIO; + + ret = pnv_eeh_do_flr(pdn, option); + if (!ret) + return ret; + + return pnv_eeh_do_af_flr(pdn, option); +} + /** * pnv_eeh_reset - Reset the specified PE * @pe: EEH PE @@ -956,7 +1055,9 @@ static int pnv_eeh_reset(struct eeh_pe *pe, int option) } bus = eeh_pe_bus_get(pe); - if (pci_is_root_bus(bus) || + if (pe->type & EEH_PE_VF) + ret = pnv_eeh_reset_vf_pe(pe, option); + else if (pci_is_root_bus(bus) || pci_is_root_bus(bus->parent)) ret = pnv_eeh_root_reset(hose, option); else @@ -1095,6 +1196,14 @@ static inline bool pnv_eeh_cfg_blocked(struct pci_dn *pdn) if (!edev || !edev->pe) return false; + /* + * We will issue FLR or AF FLR to all VFs, which are contained + * in VF PE. It relies on the EEH PCI config accessors. So we + * can't block them during the window. + */ + if (edev->physfn && (edev->pe->state & EEH_PE_RESET)) + return false; + if (edev->pe->state & EEH_PE_CFG_BLOCKED) return true; @@ -1479,6 +1588,65 @@ static int pnv_eeh_next_error(struct eeh_pe **pe) return ret; } +static int pnv_eeh_restore_vf_config(struct pci_dn *pdn) +{ + struct eeh_dev *edev = pdn_to_eeh_dev(pdn); + u32 devctl, cmd, cap2, aer_capctl; + int old_mps; + + if (edev->pcie_cap) { + /* Restore MPS */ + old_mps = (ffs(pdn->mps) - 8) << 5; + eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL, + 2, &devctl); + devctl &= ~PCI_EXP_DEVCTL_PAYLOAD; + devctl |= old_mps; + eeh_ops->write_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL, + 2, devctl); + + /* Disable Completion Timeout */ + eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCAP2, + 4, &cap2); + if (cap2 & 0x10) { + eeh_ops->read_config(pdn, + edev->pcie_cap + PCI_EXP_DEVCTL2, + 4, &cap2); + cap2 |= 0x10; + eeh_ops->write_config(pdn, + edev->pcie_cap + PCI_EXP_DEVCTL2, + 4, cap2); + } + } + + /* Enable SERR and parity checking */ + eeh_ops->read_config(pdn, PCI_COMMAND, 2, &cmd); + cmd |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR); + eeh_ops->write_config(pdn, PCI_COMMAND, 2, cmd); + + /* Enable report various errors */ + if (edev->pcie_cap) { + eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL, + 2, &devctl); + devctl &= ~PCI_EXP_DEVCTL_CERE; + devctl |= (PCI_EXP_DEVCTL_NFERE | + PCI_EXP_DEVCTL_FERE | + PCI_EXP_DEVCTL_URRE); + eeh_ops->write_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL, + 2, devctl); + } + + /* Enable ECRC generation and check */ + if (edev->pcie_cap && edev->aer_cap) { + eeh_ops->read_config(pdn, edev->aer_cap + PCI_ERR_CAP, + 4, &aer_capctl); + aer_capctl |= (PCI_ERR_CAP_ECRC_GENE | PCI_ERR_CAP_ECRC_CHKE); + eeh_ops->write_config(pdn, edev->aer_cap + PCI_ERR_CAP, + 4, aer_capctl); + } + + return 0; +} + static int pnv_eeh_restore_config(struct pci_dn *pdn) { struct eeh_dev *edev = pdn_to_eeh_dev(pdn); @@ -1488,9 +1656,21 @@ static int pnv_eeh_restore_config(struct pci_dn *pdn) if (!edev) return -EEXIST; - phb = edev->phb->private_data; - ret = opal_pci_reinit(phb->opal_id, - OPAL_REINIT_PCI_DEV, edev->config_addr); + /* + * We have to restore the PCI config space after reset since the + * firmware can't see SRIOV VFs. + * + * FIXME: The MPS, error routing rules, timeout setting are worthy + * to be exported by firmware in extendible way. + */ + if (edev->physfn) { + ret = pnv_eeh_restore_vf_config(pdn); + } else { + phb = edev->phb->private_data; + ret = opal_pci_reinit(phb->opal_id, + OPAL_REINIT_PCI_DEV, edev->config_addr); + } + if (ret) { pr_warn("%s: Can't reinit PCI dev 0x%x (%lld)\n", __func__, edev->config_addr, ret); @@ -1519,6 +1699,40 @@ static struct eeh_ops pnv_eeh_ops = { .restore_config = pnv_eeh_restore_config }; +void pcibios_bus_add_device(struct pci_dev *pdev) +{ + struct pci_dn *pdn = pci_get_pdn(pdev); + + if (!pdev->is_virtfn) + return; + + /* + * The following operations will fail if VF's sysfs files + * aren't created or its resources aren't finalized. + */ + eeh_add_device_early(pdn); + eeh_add_device_late(pdev); + eeh_sysfs_add_device(pdev); +} + +#ifdef CONFIG_PCI_IOV +static void pnv_pci_fixup_vf_mps(struct pci_dev *pdev) +{ + struct pci_dn *pdn = pci_get_pdn(pdev); + int parent_mps; + + if (!pdev->is_virtfn) + return; + + /* Synchronize MPS for VF and PF */ + parent_mps = pcie_get_mps(pdev->physfn); + if ((128 << pdev->pcie_mpss) >= parent_mps) + pcie_set_mps(pdev, parent_mps); + pdn->mps = pcie_get_mps(pdev); +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pnv_pci_fixup_vf_mps); +#endif /* CONFIG_PCI_IOV */ + /** * eeh_powernv_init - Register platform dependent EEH operations * diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c index 15bfbcd5debc..fcc8b6861b63 100644 --- a/arch/powerpc/platforms/powernv/idle.c +++ b/arch/powerpc/platforms/powernv/idle.c @@ -35,9 +35,9 @@ int pnv_save_sprs_for_winkle(void) int rc; /* - * hid0, hid1, hid4, hid5, hmeer and lpcr values are symmetric accross + * hid0, hid1, hid4, hid5, hmeer and lpcr values are symmetric across * all cpus at boot. Get these reg values of current cpu and use the - * same accross all cpus. + * same across all cpus. */ uint64_t lpcr_val = mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1; uint64_t hid0_val = mfspr(SPRN_HID0); @@ -185,7 +185,7 @@ static ssize_t store_fastsleep_workaround_applyonce(struct device *dev, * fastsleep workaround needs to be left in 'applied' state on all * the cores. Do this by- * 1. Patching out the call to 'undo' workaround in fastsleep exit path - * 2. Sending ipi to all the cores which have atleast one online thread + * 2. Sending ipi to all the cores which have at least one online thread * 3. Patching out the call to 'apply' workaround in fastsleep entry * path * There is no need to send ipi to cores which have all threads diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c index e85aa900f5c0..7229acd9bb3a 100644 --- a/arch/powerpc/platforms/powernv/npu-dma.c +++ b/arch/powerpc/platforms/powernv/npu-dma.c @@ -278,7 +278,7 @@ static void pnv_npu_disable_bypass(struct pnv_ioda_pe *npe) /* * Enable/disable bypass mode on the NPU. The NPU only supports one - * window per link, so bypass needs to be explicity enabled or + * window per link, so bypass needs to be explicitly enabled or * disabled. Unlike for a PHB3 bypass and non-bypass modes can't be * active at the same time. */ diff --git a/arch/powerpc/platforms/powernv/opal-msglog.c b/arch/powerpc/platforms/powernv/opal-msglog.c index 44ed78af1a0d..39d6ff9e5630 100644 --- a/arch/powerpc/platforms/powernv/opal-msglog.c +++ b/arch/powerpc/platforms/powernv/opal-msglog.c @@ -31,26 +31,25 @@ struct memcons { __be32 in_cons; }; -static ssize_t opal_msglog_read(struct file *file, struct kobject *kobj, - struct bin_attribute *bin_attr, char *to, - loff_t pos, size_t count) +static struct memcons *opal_memcons = NULL; + +ssize_t opal_msglog_copy(char *to, loff_t pos, size_t count) { - struct memcons *mc = bin_attr->private; const char *conbuf; ssize_t ret; size_t first_read = 0; uint32_t out_pos, avail; - if (!mc) + if (!opal_memcons) return -ENODEV; - out_pos = be32_to_cpu(ACCESS_ONCE(mc->out_pos)); + out_pos = be32_to_cpu(ACCESS_ONCE(opal_memcons->out_pos)); /* Now we've read out_pos, put a barrier in before reading the new * data it points to in conbuf. */ smp_rmb(); - conbuf = phys_to_virt(be64_to_cpu(mc->obuf_phys)); + conbuf = phys_to_virt(be64_to_cpu(opal_memcons->obuf_phys)); /* When the buffer has wrapped, read from the out_pos marker to the end * of the buffer, and then read the remaining data as in the un-wrapped @@ -58,7 +57,7 @@ static ssize_t opal_msglog_read(struct file *file, struct kobject *kobj, if (out_pos & MEMCONS_OUT_POS_WRAP) { out_pos &= MEMCONS_OUT_POS_MASK; - avail = be32_to_cpu(mc->obuf_size) - out_pos; + avail = be32_to_cpu(opal_memcons->obuf_size) - out_pos; ret = memory_read_from_buffer(to, count, &pos, conbuf + out_pos, avail); @@ -76,7 +75,7 @@ static ssize_t opal_msglog_read(struct file *file, struct kobject *kobj, } /* Sanity check. The firmware should not do this to us. */ - if (out_pos > be32_to_cpu(mc->obuf_size)) { + if (out_pos > be32_to_cpu(opal_memcons->obuf_size)) { pr_err("OPAL: memory console corruption. Aborting read.\n"); return -EINVAL; } @@ -91,6 +90,13 @@ out: return ret; } +static ssize_t opal_msglog_read(struct file *file, struct kobject *kobj, + struct bin_attribute *bin_attr, char *to, + loff_t pos, size_t count) +{ + return opal_msglog_copy(to, pos, count); +} + static struct bin_attribute opal_msglog_attr = { .attr = {.name = "msglog", .mode = 0444}, .read = opal_msglog_read @@ -117,7 +123,15 @@ void __init opal_msglog_init(void) return; } - opal_msglog_attr.private = mc; + opal_memcons = mc; +} + +void __init opal_msglog_sysfs_init(void) +{ + if (!opal_memcons) { + pr_warn("OPAL: message log initialisation failed, not creating sysfs entry\n"); + return; + } if (sysfs_create_bin_file(opal_kobj, &opal_msglog_attr) != 0) pr_warn("OPAL: sysfs file creation failed\n"); diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index 4e0da5af94a1..0256d0729252 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -724,6 +724,9 @@ static int __init opal_init(void) of_node_put(leds); } + /* Initialise OPAL message log interface */ + opal_msglog_init(); + /* Create "opal" kobject under /sys/firmware */ rc = opal_sysfs_init(); if (rc == 0) { @@ -739,8 +742,8 @@ static int __init opal_init(void) opal_platform_dump_init(); /* Setup system parameters interface */ opal_sys_param_init(); - /* Setup message log interface. */ - opal_msglog_init(); + /* Setup message log sysfs interface. */ + opal_msglog_sysfs_init(); } /* Initialize platform devices: IPMI backend, PRD & flash interface */ diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index f90dc04395bf..c5baaf3cc4e5 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -872,9 +872,6 @@ static int pnv_pci_vf_resource_shift(struct pci_dev *dev, int offset) if (!res->flags || !res->parent) continue; - if (!pnv_pci_is_mem_pref_64(res->flags)) - continue; - /* * The actual IOV BAR range is determined by the start address * and the actual size for num_vfs VFs BAR. This check is to @@ -903,9 +900,6 @@ static int pnv_pci_vf_resource_shift(struct pci_dev *dev, int offset) if (!res->flags || !res->parent) continue; - if (!pnv_pci_is_mem_pref_64(res->flags)) - continue; - size = pci_iov_resource_size(dev, i + PCI_IOV_RESOURCES); res2 = *res; res->start += size * offset; @@ -1196,29 +1190,36 @@ static void pnv_pci_ioda_setup_PEs(void) } #ifdef CONFIG_PCI_IOV -static int pnv_pci_vf_release_m64(struct pci_dev *pdev) +static int pnv_pci_vf_release_m64(struct pci_dev *pdev, u16 num_vfs) { struct pci_bus *bus; struct pci_controller *hose; struct pnv_phb *phb; struct pci_dn *pdn; int i, j; + int m64_bars; bus = pdev->bus; hose = pci_bus_to_host(bus); phb = hose->private_data; pdn = pci_get_pdn(pdev); + if (pdn->m64_single_mode) + m64_bars = num_vfs; + else + m64_bars = 1; + for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) - for (j = 0; j < M64_PER_IOV; j++) { - if (pdn->m64_wins[i][j] == IODA_INVALID_M64) + for (j = 0; j < m64_bars; j++) { + if (pdn->m64_map[j][i] == IODA_INVALID_M64) continue; opal_pci_phb_mmio_enable(phb->opal_id, - OPAL_M64_WINDOW_TYPE, pdn->m64_wins[i][j], 0); - clear_bit(pdn->m64_wins[i][j], &phb->ioda.m64_bar_alloc); - pdn->m64_wins[i][j] = IODA_INVALID_M64; + OPAL_M64_WINDOW_TYPE, pdn->m64_map[j][i], 0); + clear_bit(pdn->m64_map[j][i], &phb->ioda.m64_bar_alloc); + pdn->m64_map[j][i] = IODA_INVALID_M64; } + kfree(pdn->m64_map); return 0; } @@ -1235,8 +1236,7 @@ static int pnv_pci_vf_assign_m64(struct pci_dev *pdev, u16 num_vfs) int total_vfs; resource_size_t size, start; int pe_num; - int vf_groups; - int vf_per_group; + int m64_bars; bus = pdev->bus; hose = pci_bus_to_host(bus); @@ -1244,29 +1244,26 @@ static int pnv_pci_vf_assign_m64(struct pci_dev *pdev, u16 num_vfs) pdn = pci_get_pdn(pdev); total_vfs = pci_sriov_get_totalvfs(pdev); - /* Initialize the m64_wins to IODA_INVALID_M64 */ - for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) - for (j = 0; j < M64_PER_IOV; j++) - pdn->m64_wins[i][j] = IODA_INVALID_M64; + if (pdn->m64_single_mode) + m64_bars = num_vfs; + else + m64_bars = 1; + + pdn->m64_map = kmalloc(sizeof(*pdn->m64_map) * m64_bars, GFP_KERNEL); + if (!pdn->m64_map) + return -ENOMEM; + /* Initialize the m64_map to IODA_INVALID_M64 */ + for (i = 0; i < m64_bars ; i++) + for (j = 0; j < PCI_SRIOV_NUM_BARS; j++) + pdn->m64_map[i][j] = IODA_INVALID_M64; - if (pdn->m64_per_iov == M64_PER_IOV) { - vf_groups = (num_vfs <= M64_PER_IOV) ? num_vfs: M64_PER_IOV; - vf_per_group = (num_vfs <= M64_PER_IOV)? 1: - roundup_pow_of_two(num_vfs) / pdn->m64_per_iov; - } else { - vf_groups = 1; - vf_per_group = 1; - } for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) { res = &pdev->resource[i + PCI_IOV_RESOURCES]; if (!res->flags || !res->parent) continue; - if (!pnv_pci_is_mem_pref_64(res->flags)) - continue; - - for (j = 0; j < vf_groups; j++) { + for (j = 0; j < m64_bars; j++) { do { win = find_next_zero_bit(&phb->ioda.m64_bar_alloc, phb->ioda.m64_bar_idx + 1, 0); @@ -1275,12 +1272,11 @@ static int pnv_pci_vf_assign_m64(struct pci_dev *pdev, u16 num_vfs) goto m64_failed; } while (test_and_set_bit(win, &phb->ioda.m64_bar_alloc)); - pdn->m64_wins[i][j] = win; + pdn->m64_map[j][i] = win; - if (pdn->m64_per_iov == M64_PER_IOV) { + if (pdn->m64_single_mode) { size = pci_iov_resource_size(pdev, PCI_IOV_RESOURCES + i); - size = size * vf_per_group; start = res->start + size * j; } else { size = resource_size(res); @@ -1288,16 +1284,16 @@ static int pnv_pci_vf_assign_m64(struct pci_dev *pdev, u16 num_vfs) } /* Map the M64 here */ - if (pdn->m64_per_iov == M64_PER_IOV) { - pe_num = pdn->offset + j; + if (pdn->m64_single_mode) { + pe_num = pdn->pe_num_map[j]; rc = opal_pci_map_pe_mmio_window(phb->opal_id, pe_num, OPAL_M64_WINDOW_TYPE, - pdn->m64_wins[i][j], 0); + pdn->m64_map[j][i], 0); } rc = opal_pci_set_phb_mem_window(phb->opal_id, OPAL_M64_WINDOW_TYPE, - pdn->m64_wins[i][j], + pdn->m64_map[j][i], start, 0, /* unused */ size); @@ -1309,12 +1305,12 @@ static int pnv_pci_vf_assign_m64(struct pci_dev *pdev, u16 num_vfs) goto m64_failed; } - if (pdn->m64_per_iov == M64_PER_IOV) + if (pdn->m64_single_mode) rc = opal_pci_phb_mmio_enable(phb->opal_id, - OPAL_M64_WINDOW_TYPE, pdn->m64_wins[i][j], 2); + OPAL_M64_WINDOW_TYPE, pdn->m64_map[j][i], 2); else rc = opal_pci_phb_mmio_enable(phb->opal_id, - OPAL_M64_WINDOW_TYPE, pdn->m64_wins[i][j], 1); + OPAL_M64_WINDOW_TYPE, pdn->m64_map[j][i], 1); if (rc != OPAL_SUCCESS) { dev_err(&pdev->dev, "Failed to enable M64 window #%d: %llx\n", @@ -1326,7 +1322,7 @@ static int pnv_pci_vf_assign_m64(struct pci_dev *pdev, u16 num_vfs) return 0; m64_failed: - pnv_pci_vf_release_m64(pdev); + pnv_pci_vf_release_m64(pdev, num_vfs); return -EBUSY; } @@ -1353,15 +1349,13 @@ static void pnv_pci_ioda2_release_dma_pe(struct pci_dev *dev, struct pnv_ioda_pe iommu_free_table(tbl, of_node_full_name(dev->dev.of_node)); } -static void pnv_ioda_release_vf_PE(struct pci_dev *pdev, u16 num_vfs) +static void pnv_ioda_release_vf_PE(struct pci_dev *pdev) { struct pci_bus *bus; struct pci_controller *hose; struct pnv_phb *phb; struct pnv_ioda_pe *pe, *pe_n; struct pci_dn *pdn; - u16 vf_index; - int64_t rc; bus = pdev->bus; hose = pci_bus_to_host(bus); @@ -1371,35 +1365,6 @@ static void pnv_ioda_release_vf_PE(struct pci_dev *pdev, u16 num_vfs) if (!pdev->is_physfn) return; - if (pdn->m64_per_iov == M64_PER_IOV && num_vfs > M64_PER_IOV) { - int vf_group; - int vf_per_group; - int vf_index1; - - vf_per_group = roundup_pow_of_two(num_vfs) / pdn->m64_per_iov; - - for (vf_group = 0; vf_group < M64_PER_IOV; vf_group++) - for (vf_index = vf_group * vf_per_group; - vf_index < (vf_group + 1) * vf_per_group && - vf_index < num_vfs; - vf_index++) - for (vf_index1 = vf_group * vf_per_group; - vf_index1 < (vf_group + 1) * vf_per_group && - vf_index1 < num_vfs; - vf_index1++){ - - rc = opal_pci_set_peltv(phb->opal_id, - pdn->offset + vf_index, - pdn->offset + vf_index1, - OPAL_REMOVE_PE_FROM_DOMAIN); - - if (rc) - dev_warn(&pdev->dev, "%s: Failed to unlink same group PE#%d(%lld)\n", - __func__, - pdn->offset + vf_index1, rc); - } - } - list_for_each_entry_safe(pe, pe_n, &phb->ioda.pe_list, list) { if (pe->parent_dev != pdev) continue; @@ -1424,7 +1389,7 @@ void pnv_pci_sriov_disable(struct pci_dev *pdev) struct pnv_phb *phb; struct pci_dn *pdn; struct pci_sriov *iov; - u16 num_vfs; + u16 num_vfs, i; bus = pdev->bus; hose = pci_bus_to_host(bus); @@ -1434,18 +1399,25 @@ void pnv_pci_sriov_disable(struct pci_dev *pdev) num_vfs = pdn->num_vfs; /* Release VF PEs */ - pnv_ioda_release_vf_PE(pdev, num_vfs); + pnv_ioda_release_vf_PE(pdev); if (phb->type == PNV_PHB_IODA2) { - if (pdn->m64_per_iov == 1) - pnv_pci_vf_resource_shift(pdev, -pdn->offset); + if (!pdn->m64_single_mode) + pnv_pci_vf_resource_shift(pdev, -*pdn->pe_num_map); /* Release M64 windows */ - pnv_pci_vf_release_m64(pdev); + pnv_pci_vf_release_m64(pdev, num_vfs); /* Release PE numbers */ - bitmap_clear(phb->ioda.pe_alloc, pdn->offset, num_vfs); - pdn->offset = 0; + if (pdn->m64_single_mode) { + for (i = 0; i < num_vfs; i++) { + if (pdn->pe_num_map[i] != IODA_INVALID_PE) + pnv_ioda_free_pe(phb, pdn->pe_num_map[i]); + } + } else + bitmap_clear(phb->ioda.pe_alloc, *pdn->pe_num_map, num_vfs); + /* Releasing pe_num_map */ + kfree(pdn->pe_num_map); } } @@ -1460,7 +1432,6 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs) int pe_num; u16 vf_index; struct pci_dn *pdn; - int64_t rc; bus = pdev->bus; hose = pci_bus_to_host(bus); @@ -1472,7 +1443,10 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs) /* Reserve PE for each VF */ for (vf_index = 0; vf_index < num_vfs; vf_index++) { - pe_num = pdn->offset + vf_index; + if (pdn->m64_single_mode) + pe_num = pdn->pe_num_map[vf_index]; + else + pe_num = *pdn->pe_num_map + vf_index; pe = &phb->ioda.pe_array[pe_num]; pe->pe_number = pe_num; @@ -1505,37 +1479,6 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs) pnv_pci_ioda2_setup_dma_pe(phb, pe); } - - if (pdn->m64_per_iov == M64_PER_IOV && num_vfs > M64_PER_IOV) { - int vf_group; - int vf_per_group; - int vf_index1; - - vf_per_group = roundup_pow_of_two(num_vfs) / pdn->m64_per_iov; - - for (vf_group = 0; vf_group < M64_PER_IOV; vf_group++) { - for (vf_index = vf_group * vf_per_group; - vf_index < (vf_group + 1) * vf_per_group && - vf_index < num_vfs; - vf_index++) { - for (vf_index1 = vf_group * vf_per_group; - vf_index1 < (vf_group + 1) * vf_per_group && - vf_index1 < num_vfs; - vf_index1++) { - - rc = opal_pci_set_peltv(phb->opal_id, - pdn->offset + vf_index, - pdn->offset + vf_index1, - OPAL_ADD_PE_TO_DOMAIN); - - if (rc) - dev_warn(&pdev->dev, "%s: Failed to link same group PE#%d(%lld)\n", - __func__, - pdn->offset + vf_index1, rc); - } - } - } - } } int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs) @@ -1545,6 +1488,7 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs) struct pnv_phb *phb; struct pci_dn *pdn; int ret; + u16 i; bus = pdev->bus; hose = pci_bus_to_host(bus); @@ -1552,20 +1496,59 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs) pdn = pci_get_pdn(pdev); if (phb->type == PNV_PHB_IODA2) { + if (!pdn->vfs_expanded) { + dev_info(&pdev->dev, "don't support this SRIOV device" + " with non 64bit-prefetchable IOV BAR\n"); + return -ENOSPC; + } + + /* + * When M64 BARs functions in Single PE mode, the number of VFs + * could be enabled must be less than the number of M64 BARs. + */ + if (pdn->m64_single_mode && num_vfs > phb->ioda.m64_bar_idx) { + dev_info(&pdev->dev, "Not enough M64 BAR for VFs\n"); + return -EBUSY; + } + + /* Allocating pe_num_map */ + if (pdn->m64_single_mode) + pdn->pe_num_map = kmalloc(sizeof(*pdn->pe_num_map) * num_vfs, + GFP_KERNEL); + else + pdn->pe_num_map = kmalloc(sizeof(*pdn->pe_num_map), GFP_KERNEL); + + if (!pdn->pe_num_map) + return -ENOMEM; + + if (pdn->m64_single_mode) + for (i = 0; i < num_vfs; i++) + pdn->pe_num_map[i] = IODA_INVALID_PE; + /* Calculate available PE for required VFs */ - mutex_lock(&phb->ioda.pe_alloc_mutex); - pdn->offset = bitmap_find_next_zero_area( - phb->ioda.pe_alloc, phb->ioda.total_pe, - 0, num_vfs, 0); - if (pdn->offset >= phb->ioda.total_pe) { + if (pdn->m64_single_mode) { + for (i = 0; i < num_vfs; i++) { + pdn->pe_num_map[i] = pnv_ioda_alloc_pe(phb); + if (pdn->pe_num_map[i] == IODA_INVALID_PE) { + ret = -EBUSY; + goto m64_failed; + } + } + } else { + mutex_lock(&phb->ioda.pe_alloc_mutex); + *pdn->pe_num_map = bitmap_find_next_zero_area( + phb->ioda.pe_alloc, phb->ioda.total_pe, + 0, num_vfs, 0); + if (*pdn->pe_num_map >= phb->ioda.total_pe) { + mutex_unlock(&phb->ioda.pe_alloc_mutex); + dev_info(&pdev->dev, "Failed to enable VF%d\n", num_vfs); + kfree(pdn->pe_num_map); + return -EBUSY; + } + bitmap_set(phb->ioda.pe_alloc, *pdn->pe_num_map, num_vfs); mutex_unlock(&phb->ioda.pe_alloc_mutex); - dev_info(&pdev->dev, "Failed to enable VF%d\n", num_vfs); - pdn->offset = 0; - return -EBUSY; } - bitmap_set(phb->ioda.pe_alloc, pdn->offset, num_vfs); pdn->num_vfs = num_vfs; - mutex_unlock(&phb->ioda.pe_alloc_mutex); /* Assign M64 window accordingly */ ret = pnv_pci_vf_assign_m64(pdev, num_vfs); @@ -1579,8 +1562,8 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs) * the IOV BAR according to the PE# allocated to the VFs. * Otherwise, the PE# for the VF will conflict with others. */ - if (pdn->m64_per_iov == 1) { - ret = pnv_pci_vf_resource_shift(pdev, pdn->offset); + if (!pdn->m64_single_mode) { + ret = pnv_pci_vf_resource_shift(pdev, *pdn->pe_num_map); if (ret) goto m64_failed; } @@ -1592,8 +1575,16 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs) return 0; m64_failed: - bitmap_clear(phb->ioda.pe_alloc, pdn->offset, num_vfs); - pdn->offset = 0; + if (pdn->m64_single_mode) { + for (i = 0; i < num_vfs; i++) { + if (pdn->pe_num_map[i] != IODA_INVALID_PE) + pnv_ioda_free_pe(phb, pdn->pe_num_map[i]); + } + } else + bitmap_clear(phb->ioda.pe_alloc, *pdn->pe_num_map, num_vfs); + + /* Releasing pe_num_map */ + kfree(pdn->pe_num_map); return ret; } @@ -1612,8 +1603,7 @@ int pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs) /* Allocate PCI data */ add_dev_pci_data(pdev); - pnv_pci_sriov_enable(pdev, num_vfs); - return 0; + return pnv_pci_sriov_enable(pdev, num_vfs); } #endif /* CONFIG_PCI_IOV */ @@ -2851,45 +2841,58 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { } #ifdef CONFIG_PCI_IOV static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev) { - struct pci_controller *hose; - struct pnv_phb *phb; + struct pci_controller *hose = pci_bus_to_host(pdev->bus); + struct pnv_phb *phb = hose->private_data; + const resource_size_t gate = phb->ioda.m64_segsize >> 2; struct resource *res; int i; - resource_size_t size; + resource_size_t size, total_vf_bar_sz; struct pci_dn *pdn; int mul, total_vfs; if (!pdev->is_physfn || pdev->is_added) return; - hose = pci_bus_to_host(pdev->bus); - phb = hose->private_data; - pdn = pci_get_pdn(pdev); pdn->vfs_expanded = 0; + pdn->m64_single_mode = false; total_vfs = pci_sriov_get_totalvfs(pdev); - pdn->m64_per_iov = 1; mul = phb->ioda.total_pe; + total_vf_bar_sz = 0; for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) { res = &pdev->resource[i + PCI_IOV_RESOURCES]; if (!res->flags || res->parent) continue; if (!pnv_pci_is_mem_pref_64(res->flags)) { - dev_warn(&pdev->dev, " non M64 VF BAR%d: %pR\n", + dev_warn(&pdev->dev, "Don't support SR-IOV with" + " non M64 VF BAR%d: %pR. \n", i, res); - continue; + goto truncate_iov; } - size = pci_iov_resource_size(pdev, i + PCI_IOV_RESOURCES); + total_vf_bar_sz += pci_iov_resource_size(pdev, + i + PCI_IOV_RESOURCES); - /* bigger than 64M */ - if (size > (1 << 26)) { - dev_info(&pdev->dev, "PowerNV: VF BAR%d: %pR IOV size is bigger than 64M, roundup power2\n", - i, res); - pdn->m64_per_iov = M64_PER_IOV; + /* + * If bigger than quarter of M64 segment size, just round up + * power of two. + * + * Generally, one M64 BAR maps one IOV BAR. To avoid conflict + * with other devices, IOV BAR size is expanded to be + * (total_pe * VF_BAR_size). When VF_BAR_size is half of M64 + * segment size , the expanded size would equal to half of the + * whole M64 space size, which will exhaust the M64 Space and + * limit the system flexibility. This is a design decision to + * set the boundary to quarter of the M64 segment size. + */ + if (total_vf_bar_sz > gate) { mul = roundup_pow_of_two(total_vfs); + dev_info(&pdev->dev, + "VF BAR Total IOV size %llx > %llx, roundup to %d VFs\n", + total_vf_bar_sz, gate, mul); + pdn->m64_single_mode = true; break; } } @@ -2898,20 +2901,31 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev) res = &pdev->resource[i + PCI_IOV_RESOURCES]; if (!res->flags || res->parent) continue; - if (!pnv_pci_is_mem_pref_64(res->flags)) { - dev_warn(&pdev->dev, "Skipping expanding VF BAR%d: %pR\n", - i, res); - continue; - } - dev_dbg(&pdev->dev, " Fixing VF BAR%d: %pR to\n", i, res); size = pci_iov_resource_size(pdev, i + PCI_IOV_RESOURCES); + /* + * On PHB3, the minimum size alignment of M64 BAR in single + * mode is 32MB. + */ + if (pdn->m64_single_mode && (size < SZ_32M)) + goto truncate_iov; + dev_dbg(&pdev->dev, " Fixing VF BAR%d: %pR to\n", i, res); res->end = res->start + size * mul - 1; dev_dbg(&pdev->dev, " %pR\n", res); dev_info(&pdev->dev, "VF BAR%d: %pR (expanded to %d VFs for PE alignment)", i, res, mul); } pdn->vfs_expanded = mul; + + return; + +truncate_iov: + /* To save MMIO space, IOV BAR is truncated. */ + for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) { + res = &pdev->resource[i + PCI_IOV_RESOURCES]; + res->flags = 0; + res->end = res->start - 1; + } } #endif /* CONFIG_PCI_IOV */ @@ -3125,18 +3139,35 @@ static resource_size_t pnv_pci_window_alignment(struct pci_bus *bus, static resource_size_t pnv_pci_iov_resource_alignment(struct pci_dev *pdev, int resno) { + struct pci_controller *hose = pci_bus_to_host(pdev->bus); + struct pnv_phb *phb = hose->private_data; struct pci_dn *pdn = pci_get_pdn(pdev); - resource_size_t align, iov_align; - - iov_align = resource_size(&pdev->resource[resno]); - if (iov_align) - return iov_align; + resource_size_t align; + /* + * On PowerNV platform, IOV BAR is mapped by M64 BAR to enable the + * SR-IOV. While from hardware perspective, the range mapped by M64 + * BAR should be size aligned. + * + * When IOV BAR is mapped with M64 BAR in Single PE mode, the extra + * powernv-specific hardware restriction is gone. But if just use the + * VF BAR size as the alignment, PF BAR / VF BAR may be allocated with + * in one segment of M64 #15, which introduces the PE conflict between + * PF and VF. Based on this, the minimum alignment of an IOV BAR is + * m64_segsize. + * + * This function returns the total IOV BAR size if M64 BAR is in + * Shared PE mode or just VF BAR size if not. + * If the M64 BAR is in Single PE mode, return the VF BAR size or + * M64 segment size if IOV BAR size is less. + */ align = pci_iov_resource_size(pdev, resno); - if (pdn->vfs_expanded) - return pdn->vfs_expanded * align; + if (!pdn->vfs_expanded) + return align; + if (pdn->m64_single_mode) + return max(align, (resource_size_t)phb->ioda.m64_segsize); - return align; + return pdn->vfs_expanded * align; } #endif /* CONFIG_PCI_IOV */ diff --git a/arch/powerpc/platforms/powernv/pci-p5ioc2.c b/arch/powerpc/platforms/powernv/pci-p5ioc2.c deleted file mode 100644 index f2bdfea3b68d..000000000000 --- a/arch/powerpc/platforms/powernv/pci-p5ioc2.c +++ /dev/null @@ -1,271 +0,0 @@ -/* - * Support PCI/PCIe on PowerNV platforms - * - * Currently supports only P5IOC2 - * - * Copyright 2011 Benjamin Herrenschmidt, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/bootmem.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/msi.h> - -#include <asm/sections.h> -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/pci-bridge.h> -#include <asm/machdep.h> -#include <asm/msi_bitmap.h> -#include <asm/ppc-pci.h> -#include <asm/opal.h> -#include <asm/iommu.h> -#include <asm/tce.h> - -#include "powernv.h" -#include "pci.h" - -/* For now, use a fixed amount of TCE memory for each p5ioc2 - * hub, 16M will do - */ -#define P5IOC2_TCE_MEMORY 0x01000000 - -#ifdef CONFIG_PCI_MSI -static int pnv_pci_p5ioc2_msi_setup(struct pnv_phb *phb, struct pci_dev *dev, - unsigned int hwirq, unsigned int virq, - unsigned int is_64, struct msi_msg *msg) -{ - if (WARN_ON(!is_64)) - return -ENXIO; - msg->data = hwirq - phb->msi_base; - msg->address_hi = 0x10000000; - msg->address_lo = 0; - - return 0; -} - -static void pnv_pci_init_p5ioc2_msis(struct pnv_phb *phb) -{ - unsigned int count; - const __be32 *prop = of_get_property(phb->hose->dn, - "ibm,opal-msi-ranges", NULL); - if (!prop) - return; - - /* Don't do MSI's on p5ioc2 PCI-X are they are not properly - * verified in HW - */ - if (of_device_is_compatible(phb->hose->dn, "ibm,p5ioc2-pcix")) - return; - phb->msi_base = be32_to_cpup(prop); - count = be32_to_cpup(prop + 1); - if (msi_bitmap_alloc(&phb->msi_bmp, count, phb->hose->dn)) { - pr_err("PCI %d: Failed to allocate MSI bitmap !\n", - phb->hose->global_number); - return; - } - phb->msi_setup = pnv_pci_p5ioc2_msi_setup; - phb->msi32_support = 0; - pr_info(" Allocated bitmap for %d MSIs (base IRQ 0x%x)\n", - count, phb->msi_base); -} -#else -static void pnv_pci_init_p5ioc2_msis(struct pnv_phb *phb) { } -#endif /* CONFIG_PCI_MSI */ - -static struct iommu_table_ops pnv_p5ioc2_iommu_ops = { - .set = pnv_tce_build, -#ifdef CONFIG_IOMMU_API - .exchange = pnv_tce_xchg, -#endif - .clear = pnv_tce_free, - .get = pnv_tce_get, -}; - -static void pnv_pci_p5ioc2_dma_dev_setup(struct pnv_phb *phb, - struct pci_dev *pdev) -{ - struct iommu_table *tbl = phb->p5ioc2.table_group.tables[0]; - - if (!tbl->it_map) { - tbl->it_ops = &pnv_p5ioc2_iommu_ops; - iommu_init_table(tbl, phb->hose->node); - iommu_register_group(&phb->p5ioc2.table_group, - pci_domain_nr(phb->hose->bus), phb->opal_id); - INIT_LIST_HEAD_RCU(&tbl->it_group_list); - pnv_pci_link_table_and_group(phb->hose->node, 0, - tbl, &phb->p5ioc2.table_group); - } - - set_iommu_table_base(&pdev->dev, tbl); - iommu_add_device(&pdev->dev); -} - -static const struct pci_controller_ops pnv_pci_p5ioc2_controller_ops = { - .dma_dev_setup = pnv_pci_dma_dev_setup, -#ifdef CONFIG_PCI_MSI - .setup_msi_irqs = pnv_setup_msi_irqs, - .teardown_msi_irqs = pnv_teardown_msi_irqs, -#endif -}; - -static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np, u64 hub_id, - void *tce_mem, u64 tce_size) -{ - struct pnv_phb *phb; - const __be64 *prop64; - u64 phb_id; - int64_t rc; - static int primary = 1; - struct iommu_table_group *table_group; - struct iommu_table *tbl; - - pr_info(" Initializing p5ioc2 PHB %s\n", np->full_name); - - prop64 = of_get_property(np, "ibm,opal-phbid", NULL); - if (!prop64) { - pr_err(" Missing \"ibm,opal-phbid\" property !\n"); - return; - } - phb_id = be64_to_cpup(prop64); - pr_devel(" PHB-ID : 0x%016llx\n", phb_id); - pr_devel(" TCE AT : 0x%016lx\n", __pa(tce_mem)); - pr_devel(" TCE SZ : 0x%016llx\n", tce_size); - - rc = opal_pci_set_phb_tce_memory(phb_id, __pa(tce_mem), tce_size); - if (rc != OPAL_SUCCESS) { - pr_err(" Failed to set TCE memory, OPAL error %lld\n", rc); - return; - } - - phb = memblock_virt_alloc(sizeof(struct pnv_phb), 0); - phb->hose = pcibios_alloc_controller(np); - if (!phb->hose) { - pr_err(" Failed to allocate PCI controller\n"); - return; - } - - spin_lock_init(&phb->lock); - phb->hose->first_busno = 0; - phb->hose->last_busno = 0xff; - phb->hose->private_data = phb; - phb->hose->controller_ops = pnv_pci_p5ioc2_controller_ops; - phb->hub_id = hub_id; - phb->opal_id = phb_id; - phb->type = PNV_PHB_P5IOC2; - phb->model = PNV_PHB_MODEL_P5IOC2; - - phb->regs = of_iomap(np, 0); - - if (phb->regs == NULL) - pr_err(" Failed to map registers !\n"); - else { - pr_devel(" P_BUID = 0x%08x\n", in_be32(phb->regs + 0x100)); - pr_devel(" P_IOSZ = 0x%08x\n", in_be32(phb->regs + 0x1b0)); - pr_devel(" P_IO_ST = 0x%08x\n", in_be32(phb->regs + 0x1e0)); - pr_devel(" P_MEM1_H = 0x%08x\n", in_be32(phb->regs + 0x1a0)); - pr_devel(" P_MEM1_L = 0x%08x\n", in_be32(phb->regs + 0x190)); - pr_devel(" P_MSZ1_L = 0x%08x\n", in_be32(phb->regs + 0x1c0)); - pr_devel(" P_MEM_ST = 0x%08x\n", in_be32(phb->regs + 0x1d0)); - pr_devel(" P_MEM2_H = 0x%08x\n", in_be32(phb->regs + 0x2c0)); - pr_devel(" P_MEM2_L = 0x%08x\n", in_be32(phb->regs + 0x2b0)); - pr_devel(" P_MSZ2_H = 0x%08x\n", in_be32(phb->regs + 0x2d0)); - pr_devel(" P_MSZ2_L = 0x%08x\n", in_be32(phb->regs + 0x2e0)); - } - - /* Interpret the "ranges" property */ - /* This also maps the I/O region and sets isa_io/mem_base */ - pci_process_bridge_OF_ranges(phb->hose, np, primary); - primary = 0; - - phb->hose->ops = &pnv_pci_ops; - - /* Setup MSI support */ - pnv_pci_init_p5ioc2_msis(phb); - - /* Setup TCEs */ - phb->dma_dev_setup = pnv_pci_p5ioc2_dma_dev_setup; - pnv_pci_setup_iommu_table(&phb->p5ioc2.iommu_table, - tce_mem, tce_size, 0, - IOMMU_PAGE_SHIFT_4K); - /* - * We do not allocate iommu_table as we do not support - * hotplug or SRIOV on P5IOC2 and therefore iommu_free_table() - * should not be called for phb->p5ioc2.table_group.tables[0] ever. - */ - tbl = phb->p5ioc2.table_group.tables[0] = &phb->p5ioc2.iommu_table; - table_group = &phb->p5ioc2.table_group; - table_group->tce32_start = tbl->it_offset << tbl->it_page_shift; - table_group->tce32_size = tbl->it_size << tbl->it_page_shift; -} - -void __init pnv_pci_init_p5ioc2_hub(struct device_node *np) -{ - struct device_node *phbn; - const __be64 *prop64; - u64 hub_id; - void *tce_mem; - uint64_t tce_per_phb; - int64_t rc; - int phb_count = 0; - - pr_info("Probing p5ioc2 IO-Hub %s\n", np->full_name); - - prop64 = of_get_property(np, "ibm,opal-hubid", NULL); - if (!prop64) { - pr_err(" Missing \"ibm,opal-hubid\" property !\n"); - return; - } - hub_id = be64_to_cpup(prop64); - pr_info(" HUB-ID : 0x%016llx\n", hub_id); - - /* Count child PHBs and calculate TCE space per PHB */ - for_each_child_of_node(np, phbn) { - if (of_device_is_compatible(phbn, "ibm,p5ioc2-pcix") || - of_device_is_compatible(phbn, "ibm,p5ioc2-pciex")) - phb_count++; - } - - if (phb_count <= 0) { - pr_info(" No PHBs for Hub %s\n", np->full_name); - return; - } - - tce_per_phb = __rounddown_pow_of_two(P5IOC2_TCE_MEMORY / phb_count); - pr_info(" Allocating %lld MB of TCE memory per PHB\n", - tce_per_phb >> 20); - - /* Currently allocate 16M of TCE memory for every Hub - * - * XXX TODO: Make it chip local if possible - */ - tce_mem = memblock_virt_alloc(P5IOC2_TCE_MEMORY, P5IOC2_TCE_MEMORY); - pr_debug(" TCE : 0x%016lx..0x%016lx\n", - __pa(tce_mem), __pa(tce_mem) + P5IOC2_TCE_MEMORY - 1); - rc = opal_pci_set_hub_tce_memory(hub_id, __pa(tce_mem), - P5IOC2_TCE_MEMORY); - if (rc != OPAL_SUCCESS) { - pr_err(" Failed to allocate TCE memory, OPAL error %lld\n", rc); - return; - } - - /* Initialize PHBs */ - for_each_child_of_node(np, phbn) { - if (of_device_is_compatible(phbn, "ibm,p5ioc2-pcix") || - of_device_is_compatible(phbn, "ibm,p5ioc2-pciex")) { - pnv_pci_init_p5ioc2_phb(phbn, hub_id, - tce_mem, tce_per_phb); - tce_mem += tce_per_phb; - } - } -} diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index b1ef84a6c9d1..73c8dc2a353f 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -380,10 +380,7 @@ static void pnv_pci_config_check_eeh(struct pci_dn *pdn) */ pe_no = pdn->pe_number; if (pe_no == IODA_INVALID_PE) { - if (phb->type == PNV_PHB_P5IOC2) - pe_no = 0; - else - pe_no = phb->ioda.reserved_pe; + pe_no = phb->ioda.reserved_pe; } /* @@ -805,7 +802,6 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IBM, 0x3b9, pnv_p7ioc_rc_quirk); void __init pnv_pci_init(void) { struct device_node *np; - bool found_ioda = false; pci_add_flags(PCI_CAN_SKIP_ISA_ALIGN); @@ -813,20 +809,11 @@ void __init pnv_pci_init(void) if (!firmware_has_feature(FW_FEATURE_OPAL)) return; - /* Look for IODA IO-Hubs. We don't support mixing IODA - * and p5ioc2 due to the need to change some global - * probing flags - */ + /* Look for IODA IO-Hubs. */ for_each_compatible_node(np, NULL, "ibm,ioda-hub") { pnv_pci_init_ioda_hub(np); - found_ioda = true; } - /* Look for p5ioc2 IO-Hubs */ - if (!found_ioda) - for_each_compatible_node(np, NULL, "ibm,p5ioc2") - pnv_pci_init_p5ioc2_hub(np); - /* Look for ioda2 built-in PHB3's */ for_each_compatible_node(np, NULL, "ibm,ioda2-phb") pnv_pci_init_ioda2_phb(np); diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h index 00691a9b99af..3f814f382b2e 100644 --- a/arch/powerpc/platforms/powernv/pci.h +++ b/arch/powerpc/platforms/powernv/pci.h @@ -4,16 +4,14 @@ struct pci_dn; enum pnv_phb_type { - PNV_PHB_P5IOC2 = 0, - PNV_PHB_IODA1 = 1, - PNV_PHB_IODA2 = 2, - PNV_PHB_NPU = 3, + PNV_PHB_IODA1 = 0, + PNV_PHB_IODA2 = 1, + PNV_PHB_NPU = 2, }; /* Precise PHB model for error management */ enum pnv_phb_model { PNV_PHB_MODEL_UNKNOWN, - PNV_PHB_MODEL_P5IOC2, PNV_PHB_MODEL_P7IOC, PNV_PHB_MODEL_PHB3, PNV_PHB_MODEL_NPU, @@ -121,81 +119,74 @@ struct pnv_phb { void (*freeze_pe)(struct pnv_phb *phb, int pe_no); int (*unfreeze_pe)(struct pnv_phb *phb, int pe_no, int opt); - union { - struct { - struct iommu_table iommu_table; - struct iommu_table_group table_group; - } p5ioc2; - - struct { - /* Global bridge info */ - unsigned int total_pe; - unsigned int reserved_pe; - - /* 32-bit MMIO window */ - unsigned int m32_size; - unsigned int m32_segsize; - unsigned int m32_pci_base; - - /* 64-bit MMIO window */ - unsigned int m64_bar_idx; - unsigned long m64_size; - unsigned long m64_segsize; - unsigned long m64_base; - unsigned long m64_bar_alloc; - - /* IO ports */ - unsigned int io_size; - unsigned int io_segsize; - unsigned int io_pci_base; - - /* PE allocation bitmap */ - unsigned long *pe_alloc; - /* PE allocation mutex */ - struct mutex pe_alloc_mutex; - - /* M32 & IO segment maps */ - unsigned int *m32_segmap; - unsigned int *io_segmap; - struct pnv_ioda_pe *pe_array; - - /* IRQ chip */ - int irq_chip_init; - struct irq_chip irq_chip; - - /* Sorted list of used PE's based - * on the sequence of creation - */ - struct list_head pe_list; - struct mutex pe_list_mutex; - - /* Reverse map of PEs, will have to extend if - * we are to support more than 256 PEs, indexed - * bus { bus, devfn } - */ - unsigned char pe_rmap[0x10000]; - - /* 32-bit TCE tables allocation */ - unsigned long tce32_count; - - /* Total "weight" for the sake of DMA resources - * allocation - */ - unsigned int dma_weight; - unsigned int dma_pe_count; - - /* Sorted list of used PE's, sorted at - * boot for resource allocation purposes - */ - struct list_head pe_dma_list; - - /* TCE cache invalidate registers (physical and - * remapped) - */ - phys_addr_t tce_inval_reg_phys; - __be64 __iomem *tce_inval_reg; - } ioda; - }; + struct { + /* Global bridge info */ + unsigned int total_pe; + unsigned int reserved_pe; + + /* 32-bit MMIO window */ + unsigned int m32_size; + unsigned int m32_segsize; + unsigned int m32_pci_base; + + /* 64-bit MMIO window */ + unsigned int m64_bar_idx; + unsigned long m64_size; + unsigned long m64_segsize; + unsigned long m64_base; + unsigned long m64_bar_alloc; + + /* IO ports */ + unsigned int io_size; + unsigned int io_segsize; + unsigned int io_pci_base; + + /* PE allocation bitmap */ + unsigned long *pe_alloc; + /* PE allocation mutex */ + struct mutex pe_alloc_mutex; + + /* M32 & IO segment maps */ + unsigned int *m32_segmap; + unsigned int *io_segmap; + struct pnv_ioda_pe *pe_array; + + /* IRQ chip */ + int irq_chip_init; + struct irq_chip irq_chip; + + /* Sorted list of used PE's based + * on the sequence of creation + */ + struct list_head pe_list; + struct mutex pe_list_mutex; + + /* Reverse map of PEs, will have to extend if + * we are to support more than 256 PEs, indexed + * bus { bus, devfn } + */ + unsigned char pe_rmap[0x10000]; + + /* 32-bit TCE tables allocation */ + unsigned long tce32_count; + + /* Total "weight" for the sake of DMA resources + * allocation + */ + unsigned int dma_weight; + unsigned int dma_pe_count; + + /* Sorted list of used PE's, sorted at + * boot for resource allocation purposes + */ + struct list_head pe_dma_list; + + /* TCE cache invalidate registers (physical and + * remapped) + */ + phys_addr_t tce_inval_reg_phys; + __be64 __iomem *tce_inval_reg; + } ioda; /* PHB and hub status structure */ union { @@ -232,7 +223,6 @@ extern void pnv_pci_unlink_table_and_group(struct iommu_table *tbl, extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl, void *tce_mem, u64 tce_size, u64 dma_offset, unsigned page_shift); -extern void pnv_pci_init_p5ioc2_hub(struct device_node *np); extern void pnv_pci_init_ioda_hub(struct device_node *np); extern void pnv_pci_init_ioda2_phb(struct device_node *np); extern void pnv_pci_init_npu_phb(struct device_node *np); diff --git a/arch/powerpc/platforms/powernv/subcore.c b/arch/powerpc/platforms/powernv/subcore.c index 503a73f59359..0babef11136f 100644 --- a/arch/powerpc/platforms/powernv/subcore.c +++ b/arch/powerpc/platforms/powernv/subcore.c @@ -407,7 +407,7 @@ static DEVICE_ATTR(subcores_per_core, 0644, static int subcore_init(void) { - if (!cpu_has_feature(CPU_FTR_ARCH_207S)) + if (!cpu_has_feature(CPU_FTR_SUBCORE)) return 0; /* diff --git a/arch/powerpc/platforms/ps3/gelic_udbg.c b/arch/powerpc/platforms/ps3/gelic_udbg.c index 20b46a19a48f..09bf24d616a5 100644 --- a/arch/powerpc/platforms/ps3/gelic_udbg.c +++ b/arch/powerpc/platforms/ps3/gelic_udbg.c @@ -13,6 +13,12 @@ * */ +#include <linux/if_ether.h> +#include <linux/etherdevice.h> +#include <linux/if_vlan.h> +#include <linux/ip.h> +#include <linux/udp.h> + #include <asm/io.h> #include <asm/udbg.h> #include <asm/lv1call.h> @@ -56,39 +62,8 @@ struct debug_block { u8 pkt[1520]; } __packed; -struct ethhdr { - u8 dest[6]; - u8 src[6]; - u16 type; -} __packed; - -struct vlantag { - u16 vlan; - u16 subtype; -} __packed; - -struct iphdr { - u8 ver_len; - u8 dscp_ecn; - u16 total_length; - u16 ident; - u16 frag_off_flags; - u8 ttl; - u8 proto; - u16 checksum; - u32 src; - u32 dest; -} __packed; - -struct udphdr { - u16 src; - u16 dest; - u16 len; - u16 checksum; -} __packed; - static __iomem struct ethhdr *h_eth; -static __iomem struct vlantag *h_vlan; +static __iomem struct vlan_hdr *h_vlan; static __iomem struct iphdr *h_ip; static __iomem struct udphdr *h_udp; @@ -173,8 +148,8 @@ static void gelic_debug_init(void) h_eth = (struct ethhdr *)dbg.pkt; - memset(&h_eth->dest, 0xff, 6); - memcpy(&h_eth->src, &mac, 6); + eth_broadcast_addr(h_eth->h_dest); + memcpy(&h_eth->h_source, &mac, ETH_ALEN); header_size = sizeof(struct ethhdr); @@ -183,28 +158,29 @@ static void gelic_debug_init(void) GELIC_LV1_VLAN_TX_ETHERNET_0, 0, 0, &vlan_id, &v2); if (!result) { - h_eth->type = 0x8100; + h_eth->h_proto= ETH_P_8021Q; - header_size += sizeof(struct vlantag); - h_vlan = (struct vlantag *)(h_eth + 1); - h_vlan->vlan = vlan_id; - h_vlan->subtype = 0x0800; + header_size += sizeof(struct vlan_hdr); + h_vlan = (struct vlan_hdr *)(h_eth + 1); + h_vlan->h_vlan_TCI = vlan_id; + h_vlan->h_vlan_encapsulated_proto = ETH_P_IP; h_ip = (struct iphdr *)(h_vlan + 1); } else { - h_eth->type = 0x0800; + h_eth->h_proto= 0x0800; h_ip = (struct iphdr *)(h_eth + 1); } header_size += sizeof(struct iphdr); - h_ip->ver_len = 0x45; + h_ip->version = 4; + h_ip->ihl = 5; h_ip->ttl = 10; - h_ip->proto = 0x11; - h_ip->src = 0x00000000; - h_ip->dest = 0xffffffff; + h_ip->protocol = 0x11; + h_ip->saddr = 0x00000000; + h_ip->daddr = 0xffffffff; header_size += sizeof(struct udphdr); h_udp = (struct udphdr *)(h_ip + 1); - h_udp->src = GELIC_DEBUG_PORT; + h_udp->source = GELIC_DEBUG_PORT; h_udp->dest = GELIC_DEBUG_PORT; pmsgc = pmsg = (char *)(h_udp + 1); @@ -225,16 +201,16 @@ static void gelic_sendbuf(int msgsize) int i; dbg.descr.buf_size = header_size + msgsize; - h_ip->total_length = msgsize + sizeof(struct udphdr) + + h_ip->tot_len = msgsize + sizeof(struct udphdr) + sizeof(struct iphdr); h_udp->len = msgsize + sizeof(struct udphdr); - h_ip->checksum = 0; + h_ip->check = 0; sum = 0; p = (u16 *)h_ip; for (i = 0; i < 5; i++) sum += *p++; - h_ip->checksum = ~(sum + (sum >> 16)); + h_ip->check = ~(sum + (sum >> 16)); dbg.descr.dmac_cmd_status = GELIC_DESCR_DMA_CMD_NO_CHKSUM | GELIC_DESCR_TX_DMA_FRAME_TAIL; diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index 638c4060938e..b831638e6f4a 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -78,7 +78,7 @@ struct ps3_bmp { /** * struct ps3_private - a per cpu data structure * @bmp: ps3_bmp structure - * @bmp_lock: Syncronize access to bmp. + * @bmp_lock: Synchronize access to bmp. * @ipi_debug_brk_mask: Mask for debug break IPIs * @ppe_id: HV logical_ppe_id * @thread_id: HV thread_id diff --git a/arch/powerpc/platforms/pseries/hvconsole.c b/arch/powerpc/platforms/pseries/hvconsole.c index 849b29b3e9ae..74da18de853a 100644 --- a/arch/powerpc/platforms/pseries/hvconsole.c +++ b/arch/powerpc/platforms/pseries/hvconsole.c @@ -31,7 +31,7 @@ #include <asm/plpar_wrappers.h> /** - * hvc_get_chars - retrieve characters from firmware for denoted vterm adatper + * hvc_get_chars - retrieve characters from firmware for denoted vterm adapter * @vtermno: The vtermno or unit_address of the adapter from which to fetch the * data. * @buf: The character buffer into which to put the character data fetched from diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 477290ad855e..2415a0d31f8f 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -505,8 +505,8 @@ static void pSeries_lpar_hugepage_invalidate(unsigned long vsid, } #endif -static void pSeries_lpar_hpte_removebolted(unsigned long ea, - int psize, int ssize) +static int pSeries_lpar_hpte_removebolted(unsigned long ea, + int psize, int ssize) { unsigned long vpn; unsigned long slot, vsid; @@ -515,11 +515,14 @@ static void pSeries_lpar_hpte_removebolted(unsigned long ea, vpn = hpt_vpn(ea, vsid, ssize); slot = pSeries_lpar_hpte_find(vpn, psize, ssize); - BUG_ON(slot == -1); + if (slot == -1) + return -ENOENT; + /* * lpar doesn't use the passed actual page size */ pSeries_lpar_hpte_invalidate(slot, vpn, psize, 0, ssize, 0); + return 0; } /* diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 36df46eaba24..6e944fc6e5f9 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -515,7 +515,7 @@ static void __init pSeries_setup_arch(void) fwnmi_init(); - /* By default, only probe PCI (can be overriden by rtas_pci) */ + /* By default, only probe PCI (can be overridden by rtas_pci) */ pci_add_flags(PCI_PROBE_ONLY); /* Find and initialize PCI host bridges */ diff --git a/arch/powerpc/scripts/gcc-check-mprofile-kernel.sh b/arch/powerpc/scripts/gcc-check-mprofile-kernel.sh new file mode 100755 index 000000000000..c658d8cf760b --- /dev/null +++ b/arch/powerpc/scripts/gcc-check-mprofile-kernel.sh @@ -0,0 +1,23 @@ +#!/bin/bash + +set -e +set -o pipefail + +# To debug, uncomment the following line +# set -x + +# Test whether the compile option -mprofile-kernel exists and generates +# profiling code (ie. a call to _mcount()). +echo "int func() { return 0; }" | \ + $* -S -x c -O2 -p -mprofile-kernel - -o - 2> /dev/null | \ + grep -q "_mcount" + +# Test whether the notrace attribute correctly suppresses calls to _mcount(). + +echo -e "#include <linux/compiler.h>\nnotrace int func() { return 0; }" | \ + $* -S -x c -O2 -p -mprofile-kernel - -o - 2> /dev/null | \ + grep -q "_mcount" && \ + exit 1 + +echo "OK" +exit 0 diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig index a19332a38715..52dc165c0efb 100644 --- a/arch/powerpc/sysdev/Kconfig +++ b/arch/powerpc/sysdev/Kconfig @@ -40,3 +40,8 @@ config SCOM_DEBUGFS config GE_FPGA bool default n + +config FSL_CORENET_RCPM + bool + help + This option enables support for RCPM (Run Control/Power Management). diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index bd6bd729969c..a254824719f1 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o fsl_mpic_err.o obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y) obj-$(CONFIG_FSL_PMC) += fsl_pmc.o +obj-$(CONFIG_FSL_CORENET_RCPM) += fsl_rcpm.o obj-$(CONFIG_FSL_LBC) += fsl_lbc.o obj-$(CONFIG_FSL_GTM) += fsl_gtm.o obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c index 5e6ff38ea69f..8ed65365be50 100644 --- a/arch/powerpc/sysdev/cpm1.c +++ b/arch/powerpc/sysdev/cpm1.c @@ -228,7 +228,10 @@ void __init cpm_reset(void) * Bit 25, FAM can also be set to use FEC aggressive mode (860T). */ siu_conf = immr_map(im_siu_conf); - out_be32(&siu_conf->sc_sdcr, 1); + if ((mfspr(SPRN_IMMR) & 0xffff) == 0x0900) /* MPC885 */ + out_be32(&siu_conf->sc_sdcr, 0x40); + else + out_be32(&siu_conf->sc_sdcr, 1); immr_unmap(siu_conf); cpm_muram_init(); diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c index 47f781059eeb..424b67fdb57f 100644 --- a/arch/powerpc/sysdev/fsl_lbc.c +++ b/arch/powerpc/sysdev/fsl_lbc.c @@ -27,6 +27,7 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/mod_devicetable.h> +#include <linux/syscore_ops.h> #include <asm/prom.h> #include <asm/fsl_lbc.h> @@ -352,24 +353,42 @@ err: #ifdef CONFIG_SUSPEND /* save lbc registers */ -static int fsl_lbc_suspend(struct platform_device *pdev, pm_message_t state) +static int fsl_lbc_syscore_suspend(void) { - struct fsl_lbc_ctrl *ctrl = dev_get_drvdata(&pdev->dev); - struct fsl_lbc_regs __iomem *lbc = ctrl->regs; + struct fsl_lbc_ctrl *ctrl; + struct fsl_lbc_regs __iomem *lbc; + + ctrl = fsl_lbc_ctrl_dev; + if (!ctrl) + goto out; + + lbc = ctrl->regs; + if (!lbc) + goto out; ctrl->saved_regs = kmalloc(sizeof(struct fsl_lbc_regs), GFP_KERNEL); if (!ctrl->saved_regs) return -ENOMEM; _memcpy_fromio(ctrl->saved_regs, lbc, sizeof(struct fsl_lbc_regs)); + +out: return 0; } /* restore lbc registers */ -static int fsl_lbc_resume(struct platform_device *pdev) +static void fsl_lbc_syscore_resume(void) { - struct fsl_lbc_ctrl *ctrl = dev_get_drvdata(&pdev->dev); - struct fsl_lbc_regs __iomem *lbc = ctrl->regs; + struct fsl_lbc_ctrl *ctrl; + struct fsl_lbc_regs __iomem *lbc; + + ctrl = fsl_lbc_ctrl_dev; + if (!ctrl) + goto out; + + lbc = ctrl->regs; + if (!lbc) + goto out; if (ctrl->saved_regs) { _memcpy_toio(lbc, ctrl->saved_regs, @@ -377,7 +396,9 @@ static int fsl_lbc_resume(struct platform_device *pdev) kfree(ctrl->saved_regs); ctrl->saved_regs = NULL; } - return 0; + +out: + return; } #endif /* CONFIG_SUSPEND */ @@ -389,20 +410,26 @@ static const struct of_device_id fsl_lbc_match[] = { {}, }; +#ifdef CONFIG_SUSPEND +static struct syscore_ops lbc_syscore_pm_ops = { + .suspend = fsl_lbc_syscore_suspend, + .resume = fsl_lbc_syscore_resume, +}; +#endif + static struct platform_driver fsl_lbc_ctrl_driver = { .driver = { .name = "fsl-lbc", .of_match_table = fsl_lbc_match, }, .probe = fsl_lbc_ctrl_probe, -#ifdef CONFIG_SUSPEND - .suspend = fsl_lbc_suspend, - .resume = fsl_lbc_resume, -#endif }; static int __init fsl_lbc_init(void) { +#ifdef CONFIG_SUSPEND + register_syscore_ops(&lbc_syscore_pm_ops); +#endif return platform_driver_register(&fsl_lbc_ctrl_driver); } subsys_initcall(fsl_lbc_init); diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index c69e88e91459..85729f49764f 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -575,7 +575,7 @@ int fsl_add_bridge(struct platform_device *pdev, int is_primary) if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { /* use fsl_indirect_read_config for PCIe */ hose->ops = &fsl_indirect_pcie_ops; - /* For PCIE read HEADER_TYPE to identify controler mode */ + /* For PCIE read HEADER_TYPE to identify controller mode */ early_read_config_byte(hose, 0, 0, PCI_HEADER_TYPE, &hdr_type); if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) goto no_bridge; diff --git a/arch/powerpc/sysdev/fsl_rcpm.c b/arch/powerpc/sysdev/fsl_rcpm.c new file mode 100644 index 000000000000..9259a94f70e1 --- /dev/null +++ b/arch/powerpc/sysdev/fsl_rcpm.c @@ -0,0 +1,386 @@ +/* + * RCPM(Run Control/Power Management) support + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * + * Author: Chenhui Zhao <chenhui.zhao@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#define pr_fmt(fmt) "%s: " fmt, __func__ + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/of_address.h> +#include <linux/export.h> + +#include <asm/io.h> +#include <linux/fsl/guts.h> +#include <asm/cputhreads.h> +#include <asm/fsl_pm.h> +#include <asm/smp.h> + +static struct ccsr_rcpm_v1 __iomem *rcpm_v1_regs; +static struct ccsr_rcpm_v2 __iomem *rcpm_v2_regs; +static unsigned int fsl_supported_pm_modes; + +static void rcpm_v1_irq_mask(int cpu) +{ + int hw_cpu = get_hard_smp_processor_id(cpu); + unsigned int mask = 1 << hw_cpu; + + setbits32(&rcpm_v1_regs->cpmimr, mask); + setbits32(&rcpm_v1_regs->cpmcimr, mask); + setbits32(&rcpm_v1_regs->cpmmcmr, mask); + setbits32(&rcpm_v1_regs->cpmnmimr, mask); +} + +static void rcpm_v2_irq_mask(int cpu) +{ + int hw_cpu = get_hard_smp_processor_id(cpu); + unsigned int mask = 1 << hw_cpu; + + setbits32(&rcpm_v2_regs->tpmimr0, mask); + setbits32(&rcpm_v2_regs->tpmcimr0, mask); + setbits32(&rcpm_v2_regs->tpmmcmr0, mask); + setbits32(&rcpm_v2_regs->tpmnmimr0, mask); +} + +static void rcpm_v1_irq_unmask(int cpu) +{ + int hw_cpu = get_hard_smp_processor_id(cpu); + unsigned int mask = 1 << hw_cpu; + + clrbits32(&rcpm_v1_regs->cpmimr, mask); + clrbits32(&rcpm_v1_regs->cpmcimr, mask); + clrbits32(&rcpm_v1_regs->cpmmcmr, mask); + clrbits32(&rcpm_v1_regs->cpmnmimr, mask); +} + +static void rcpm_v2_irq_unmask(int cpu) +{ + int hw_cpu = get_hard_smp_processor_id(cpu); + unsigned int mask = 1 << hw_cpu; + + clrbits32(&rcpm_v2_regs->tpmimr0, mask); + clrbits32(&rcpm_v2_regs->tpmcimr0, mask); + clrbits32(&rcpm_v2_regs->tpmmcmr0, mask); + clrbits32(&rcpm_v2_regs->tpmnmimr0, mask); +} + +static void rcpm_v1_set_ip_power(bool enable, u32 mask) +{ + if (enable) + setbits32(&rcpm_v1_regs->ippdexpcr, mask); + else + clrbits32(&rcpm_v1_regs->ippdexpcr, mask); +} + +static void rcpm_v2_set_ip_power(bool enable, u32 mask) +{ + if (enable) + setbits32(&rcpm_v2_regs->ippdexpcr[0], mask); + else + clrbits32(&rcpm_v2_regs->ippdexpcr[0], mask); +} + +static void rcpm_v1_cpu_enter_state(int cpu, int state) +{ + int hw_cpu = get_hard_smp_processor_id(cpu); + unsigned int mask = 1 << hw_cpu; + + switch (state) { + case E500_PM_PH10: + setbits32(&rcpm_v1_regs->cdozcr, mask); + break; + case E500_PM_PH15: + setbits32(&rcpm_v1_regs->cnapcr, mask); + break; + default: + pr_warn("Unknown cpu PM state (%d)\n", state); + break; + } +} + +static void rcpm_v2_cpu_enter_state(int cpu, int state) +{ + int hw_cpu = get_hard_smp_processor_id(cpu); + u32 mask = 1 << cpu_core_index_of_thread(cpu); + + switch (state) { + case E500_PM_PH10: + /* one bit corresponds to one thread for PH10 of 6500 */ + setbits32(&rcpm_v2_regs->tph10setr0, 1 << hw_cpu); + break; + case E500_PM_PH15: + setbits32(&rcpm_v2_regs->pcph15setr, mask); + break; + case E500_PM_PH20: + setbits32(&rcpm_v2_regs->pcph20setr, mask); + break; + case E500_PM_PH30: + setbits32(&rcpm_v2_regs->pcph30setr, mask); + break; + default: + pr_warn("Unknown cpu PM state (%d)\n", state); + } +} + +static void rcpm_v1_cpu_die(int cpu) +{ + rcpm_v1_cpu_enter_state(cpu, E500_PM_PH15); +} + +#ifdef CONFIG_PPC64 +static void qoriq_disable_thread(int cpu) +{ + int thread = cpu_thread_in_core(cpu); + + book3e_stop_thread(thread); +} +#endif + +static void rcpm_v2_cpu_die(int cpu) +{ +#ifdef CONFIG_PPC64 + int primary; + + if (threads_per_core == 2) { + primary = cpu_first_thread_sibling(cpu); + if (cpu_is_offline(primary) && cpu_is_offline(primary + 1)) { + /* if both threads are offline, put the cpu in PH20 */ + rcpm_v2_cpu_enter_state(cpu, E500_PM_PH20); + } else { + /* if only one thread is offline, disable the thread */ + qoriq_disable_thread(cpu); + } + } +#endif + + if (threads_per_core == 1) + rcpm_v2_cpu_enter_state(cpu, E500_PM_PH20); +} + +static void rcpm_v1_cpu_exit_state(int cpu, int state) +{ + int hw_cpu = get_hard_smp_processor_id(cpu); + unsigned int mask = 1 << hw_cpu; + + switch (state) { + case E500_PM_PH10: + clrbits32(&rcpm_v1_regs->cdozcr, mask); + break; + case E500_PM_PH15: + clrbits32(&rcpm_v1_regs->cnapcr, mask); + break; + default: + pr_warn("Unknown cpu PM state (%d)\n", state); + break; + } +} + +static void rcpm_v1_cpu_up_prepare(int cpu) +{ + rcpm_v1_cpu_exit_state(cpu, E500_PM_PH15); + rcpm_v1_irq_unmask(cpu); +} + +static void rcpm_v2_cpu_exit_state(int cpu, int state) +{ + int hw_cpu = get_hard_smp_processor_id(cpu); + u32 mask = 1 << cpu_core_index_of_thread(cpu); + + switch (state) { + case E500_PM_PH10: + setbits32(&rcpm_v2_regs->tph10clrr0, 1 << hw_cpu); + break; + case E500_PM_PH15: + setbits32(&rcpm_v2_regs->pcph15clrr, mask); + break; + case E500_PM_PH20: + setbits32(&rcpm_v2_regs->pcph20clrr, mask); + break; + case E500_PM_PH30: + setbits32(&rcpm_v2_regs->pcph30clrr, mask); + break; + default: + pr_warn("Unknown cpu PM state (%d)\n", state); + } +} + +static void rcpm_v2_cpu_up_prepare(int cpu) +{ + rcpm_v2_cpu_exit_state(cpu, E500_PM_PH20); + rcpm_v2_irq_unmask(cpu); +} + +static int rcpm_v1_plat_enter_state(int state) +{ + u32 *pmcsr_reg = &rcpm_v1_regs->powmgtcsr; + int ret = 0; + int result; + + switch (state) { + case PLAT_PM_SLEEP: + setbits32(pmcsr_reg, RCPM_POWMGTCSR_SLP); + + /* Upon resume, wait for RCPM_POWMGTCSR_SLP bit to be clear. */ + result = spin_event_timeout( + !(in_be32(pmcsr_reg) & RCPM_POWMGTCSR_SLP), 10000, 10); + if (!result) { + pr_err("timeout waiting for SLP bit to be cleared\n"); + ret = -ETIMEDOUT; + } + break; + default: + pr_warn("Unknown platform PM state (%d)", state); + ret = -EINVAL; + } + + return ret; +} + +static int rcpm_v2_plat_enter_state(int state) +{ + u32 *pmcsr_reg = &rcpm_v2_regs->powmgtcsr; + int ret = 0; + int result; + + switch (state) { + case PLAT_PM_LPM20: + /* clear previous LPM20 status */ + setbits32(pmcsr_reg, RCPM_POWMGTCSR_P_LPM20_ST); + /* enter LPM20 status */ + setbits32(pmcsr_reg, RCPM_POWMGTCSR_LPM20_RQ); + + /* At this point, the device is in LPM20 status. */ + + /* resume ... */ + result = spin_event_timeout( + !(in_be32(pmcsr_reg) & RCPM_POWMGTCSR_LPM20_ST), 10000, 10); + if (!result) { + pr_err("timeout waiting for LPM20 bit to be cleared\n"); + ret = -ETIMEDOUT; + } + break; + default: + pr_warn("Unknown platform PM state (%d)\n", state); + ret = -EINVAL; + } + + return ret; +} + +static int rcpm_v1_plat_enter_sleep(void) +{ + return rcpm_v1_plat_enter_state(PLAT_PM_SLEEP); +} + +static int rcpm_v2_plat_enter_sleep(void) +{ + return rcpm_v2_plat_enter_state(PLAT_PM_LPM20); +} + +static void rcpm_common_freeze_time_base(u32 *tben_reg, int freeze) +{ + static u32 mask; + + if (freeze) { + mask = in_be32(tben_reg); + clrbits32(tben_reg, mask); + } else { + setbits32(tben_reg, mask); + } + + /* read back to push the previous write */ + in_be32(tben_reg); +} + +static void rcpm_v1_freeze_time_base(bool freeze) +{ + rcpm_common_freeze_time_base(&rcpm_v1_regs->ctbenr, freeze); +} + +static void rcpm_v2_freeze_time_base(bool freeze) +{ + rcpm_common_freeze_time_base(&rcpm_v2_regs->pctbenr, freeze); +} + +static unsigned int rcpm_get_pm_modes(void) +{ + return fsl_supported_pm_modes; +} + +static const struct fsl_pm_ops qoriq_rcpm_v1_ops = { + .irq_mask = rcpm_v1_irq_mask, + .irq_unmask = rcpm_v1_irq_unmask, + .cpu_enter_state = rcpm_v1_cpu_enter_state, + .cpu_exit_state = rcpm_v1_cpu_exit_state, + .cpu_up_prepare = rcpm_v1_cpu_up_prepare, + .cpu_die = rcpm_v1_cpu_die, + .plat_enter_sleep = rcpm_v1_plat_enter_sleep, + .set_ip_power = rcpm_v1_set_ip_power, + .freeze_time_base = rcpm_v1_freeze_time_base, + .get_pm_modes = rcpm_get_pm_modes, +}; + +static const struct fsl_pm_ops qoriq_rcpm_v2_ops = { + .irq_mask = rcpm_v2_irq_mask, + .irq_unmask = rcpm_v2_irq_unmask, + .cpu_enter_state = rcpm_v2_cpu_enter_state, + .cpu_exit_state = rcpm_v2_cpu_exit_state, + .cpu_up_prepare = rcpm_v2_cpu_up_prepare, + .cpu_die = rcpm_v2_cpu_die, + .plat_enter_sleep = rcpm_v2_plat_enter_sleep, + .set_ip_power = rcpm_v2_set_ip_power, + .freeze_time_base = rcpm_v2_freeze_time_base, + .get_pm_modes = rcpm_get_pm_modes, +}; + +static const struct of_device_id rcpm_matches[] = { + { + .compatible = "fsl,qoriq-rcpm-1.0", + .data = &qoriq_rcpm_v1_ops, + }, + { + .compatible = "fsl,qoriq-rcpm-2.0", + .data = &qoriq_rcpm_v2_ops, + }, + { + .compatible = "fsl,qoriq-rcpm-2.1", + .data = &qoriq_rcpm_v2_ops, + }, + {}, +}; + +int __init fsl_rcpm_init(void) +{ + struct device_node *np; + const struct of_device_id *match; + void __iomem *base; + + np = of_find_matching_node_and_match(NULL, rcpm_matches, &match); + if (!np) + return 0; + + base = of_iomap(np, 0); + of_node_put(np); + if (!base) { + pr_err("of_iomap() error.\n"); + return -ENOMEM; + } + + rcpm_v1_regs = base; + rcpm_v2_regs = base; + + /* support sleep by default */ + fsl_supported_pm_modes = FSL_PM_SLEEP; + + qoriq_pm_ops = match->data; + + return 0; +} diff --git a/arch/powerpc/sysdev/fsl_rmu.c b/arch/powerpc/sysdev/fsl_rmu.c index b48197ae44d0..ffe0ee832768 100644 --- a/arch/powerpc/sysdev/fsl_rmu.c +++ b/arch/powerpc/sysdev/fsl_rmu.c @@ -570,7 +570,7 @@ int fsl_rio_port_write_init(struct fsl_rio_pw *pw) out_be32(&pw->pw_regs->pwsr, (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD)); - /* Configure port write contoller for snooping enable all reporting, + /* Configure port write controller for snooping enable all reporting, clear queue full */ out_be32(&pw->pw_regs->pwmr, RIO_IPWMR_SEN | RIO_IPWMR_QFIE | RIO_IPWMR_EIE | RIO_IPWMR_CQ); diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c index 6f99ed3967fd..aa2c186d3115 100644 --- a/arch/powerpc/sysdev/i8259.c +++ b/arch/powerpc/sysdev/i8259.c @@ -238,7 +238,7 @@ void i8259_init(struct device_node *node, unsigned long intack_addr) /* init master interrupt controller */ outb(0x11, 0x20); /* Start init sequence */ outb(0x00, 0x21); /* Vector base */ - outb(0x04, 0x21); /* edge tiggered, Cascade (slave) on IRQ2 */ + outb(0x04, 0x21); /* edge triggered, Cascade (slave) on IRQ2 */ outb(0x01, 0x21); /* Select 8086 mode */ /* init slave interrupt controller */ diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 2a0452e364ba..afe3c7cd395d 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -2,7 +2,7 @@ * arch/powerpc/kernel/mpic.c * * Driver for interrupt controllers following the OpenPIC standard, the - * common implementation beeing IBM's MPIC. This driver also can deal + * common implementation being IBM's MPIC. This driver also can deal * with various broken implementations of this HW. * * Copyright (C) 2004 Benjamin Herrenschmidt, IBM Corp. @@ -1657,7 +1657,7 @@ void __init mpic_init(struct mpic *mpic) } } - /* FSL mpic error interrupt intialization */ + /* FSL mpic error interrupt initialization */ if (mpic->flags & MPIC_FSL_HAS_EIMR) mpic_err_int_init(mpic, MPIC_FSL_ERR_INT); } diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 07a8508cb7fa..942796fa4767 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -47,6 +47,9 @@ #include <asm/debug.h> #include <asm/hw_breakpoint.h> +#include <asm/opal.h> +#include <asm/firmware.h> + #ifdef CONFIG_PPC64 #include <asm/hvcall.h> #include <asm/paca.h> @@ -119,6 +122,16 @@ static void dump(void); static void prdump(unsigned long, long); static int ppc_inst_dump(unsigned long, long, int); static void dump_log_buf(void); + +#ifdef CONFIG_PPC_POWERNV +static void dump_opal_msglog(void); +#else +static inline void dump_opal_msglog(void) +{ + printf("Machine is not running OPAL firmware.\n"); +} +#endif + static void backtrace(struct pt_regs *); static void excprint(struct pt_regs *); static void prregs(struct pt_regs *); @@ -150,6 +163,7 @@ static int cpu_cmd(void); static void csum(void); static void bootcmds(void); static void proccall(void); +static void show_tasks(void); void dump_segments(void); static void symbol_lookup(void); static void xmon_show_stack(unsigned long sp, unsigned long lr, @@ -202,6 +216,10 @@ Commands:\n\ df dump float values\n\ dd dump double values\n\ dl dump the kernel log buffer\n" +#ifdef CONFIG_PPC_POWERNV + "\ + do dump the OPAL message log\n" +#endif #ifdef CONFIG_PPC64 "\ dp[#] dump paca for current cpu, or cpu #\n\ @@ -221,6 +239,7 @@ Commands:\n\ mz zero a block of memory\n\ mi show information about memory allocation\n\ p call a procedure\n\ + P list processes/tasks\n\ r print registers\n\ s single step\n" #ifdef CONFIG_SPU_BASE @@ -233,7 +252,7 @@ Commands:\n\ " S print special registers\n\ t print backtrace\n\ x exit monitor and recover\n\ - X exit monitor and dont recover\n" + X exit monitor and don't recover\n" #if defined(CONFIG_PPC64) && !defined(CONFIG_PPC_BOOK3E) " u dump segment table or SLB\n" #elif defined(CONFIG_PPC_STD_MMU_32) @@ -950,6 +969,9 @@ cmds(struct pt_regs *excp) case 'p': proccall(); break; + case 'P': + show_tasks(); + break; #ifdef CONFIG_PPC_STD_MMU case 'u': dump_segments(); @@ -2253,6 +2275,8 @@ dump(void) last_cmd = "di\n"; } else if (c == 'l') { dump_log_buf(); + } else if (c == 'o') { + dump_opal_msglog(); } else if (c == 'r') { scanhex(&ndump); if (ndump == 0) @@ -2395,6 +2419,45 @@ dump_log_buf(void) catch_memory_errors = 0; } +#ifdef CONFIG_PPC_POWERNV +static void dump_opal_msglog(void) +{ + unsigned char buf[128]; + ssize_t res; + loff_t pos = 0; + + if (!firmware_has_feature(FW_FEATURE_OPAL)) { + printf("Machine is not running OPAL firmware.\n"); + return; + } + + if (setjmp(bus_error_jmp) != 0) { + printf("Error dumping OPAL msglog!\n"); + return; + } + + catch_memory_errors = 1; + sync(); + + xmon_start_pagination(); + while ((res = opal_msglog_copy(buf, pos, sizeof(buf) - 1))) { + if (res < 0) { + printf("Error dumping OPAL msglog! Error: %zd\n", res); + break; + } + buf[res] = '\0'; + printf("%s", buf); + pos += res; + } + xmon_end_pagination(); + + sync(); + /* wait a little while to see if we get a machine check */ + __delay(200); + catch_memory_errors = 0; +} +#endif + /* * Memory operations - move, set, print differences */ @@ -2508,6 +2571,61 @@ memzcan(void) printf("%.8x\n", a - mskip); } +static void show_task(struct task_struct *tsk) +{ + char state; + + /* + * Cloned from kdb_task_state_char(), which is not entirely + * appropriate for calling from xmon. This could be moved + * to a common, generic, routine used by both. + */ + state = (tsk->state == 0) ? 'R' : + (tsk->state < 0) ? 'U' : + (tsk->state & TASK_UNINTERRUPTIBLE) ? 'D' : + (tsk->state & TASK_STOPPED) ? 'T' : + (tsk->state & TASK_TRACED) ? 'C' : + (tsk->exit_state & EXIT_ZOMBIE) ? 'Z' : + (tsk->exit_state & EXIT_DEAD) ? 'E' : + (tsk->state & TASK_INTERRUPTIBLE) ? 'S' : '?'; + + printf("%p %016lx %6d %6d %c %2d %s\n", tsk, + tsk->thread.ksp, + tsk->pid, tsk->parent->pid, + state, task_thread_info(tsk)->cpu, + tsk->comm); +} + +static void show_tasks(void) +{ + unsigned long tskv; + struct task_struct *tsk = NULL; + + printf(" task_struct ->thread.ksp PID PPID S P CMD\n"); + + if (scanhex(&tskv)) + tsk = (struct task_struct *)tskv; + + if (setjmp(bus_error_jmp) != 0) { + catch_memory_errors = 0; + printf("*** Error dumping task %p\n", tsk); + return; + } + + catch_memory_errors = 1; + sync(); + + if (tsk) + show_task(tsk); + else + for_each_process(tsk) + show_task(tsk); + + sync(); + __delay(200); + catch_memory_errors = 0; +} + static void proccall(void) { unsigned long args[8]; |