diff options
Diffstat (limited to 'arch/powerpc/sysdev')
-rw-r--r-- | arch/powerpc/sysdev/cpm1.c | 2 | ||||
-rw-r--r-- | arch/powerpc/sysdev/cpm2.c | 4 | ||||
-rw-r--r-- | arch/powerpc/sysdev/cpm_common.c | 15 | ||||
-rw-r--r-- | arch/powerpc/sysdev/dcr-low.S | 3 | ||||
-rw-r--r-- | arch/powerpc/sysdev/fsl_pci.c | 12 | ||||
-rw-r--r-- | arch/powerpc/sysdev/fsl_soc.c | 33 | ||||
-rw-r--r-- | arch/powerpc/sysdev/fsl_soc.h | 2 | ||||
-rw-r--r-- | arch/powerpc/sysdev/mpic.c | 2 |
8 files changed, 44 insertions, 29 deletions
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c index 3c0eb9b25535..986cd111d4df 100644 --- a/arch/powerpc/sysdev/cpm1.c +++ b/arch/powerpc/sysdev/cpm1.c @@ -233,8 +233,6 @@ void __init cpm_reset(void) else out_be32(&siu_conf->sc_sdcr, 1); immr_unmap(siu_conf); - - cpm_muram_init(); } static DEFINE_SPINLOCK(cmd_lock); diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c index 8dc1e24f3c23..f78ff841652c 100644 --- a/arch/powerpc/sysdev/cpm2.c +++ b/arch/powerpc/sysdev/cpm2.c @@ -66,10 +66,6 @@ void __init cpm2_reset(void) cpm2_immr = ioremap(get_immrbase(), CPM_MAP_SIZE); #endif - /* Reclaim the DP memory for our use. - */ - cpm_muram_init(); - /* Tell everyone where the comm processor resides. */ cpmp = &cpm2_immr->im_cpm; diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c index 947f42007734..51bf749a4f3a 100644 --- a/arch/powerpc/sysdev/cpm_common.c +++ b/arch/powerpc/sysdev/cpm_common.c @@ -37,6 +37,21 @@ #include <linux/of_gpio.h> #endif +static int __init cpm_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,cpm1"); + if (!np) + np = of_find_compatible_node(NULL, NULL, "fsl,cpm2"); + if (!np) + return -ENODEV; + cpm_muram_init(); + of_node_put(np); + return 0; +} +subsys_initcall(cpm_init); + #ifdef CONFIG_PPC_EARLY_DEBUG_CPM static u32 __iomem *cpm_udbg_txdesc; static u8 __iomem *cpm_udbg_txbuf; diff --git a/arch/powerpc/sysdev/dcr-low.S b/arch/powerpc/sysdev/dcr-low.S index d3098ef1404a..e687bb2003ff 100644 --- a/arch/powerpc/sysdev/dcr-low.S +++ b/arch/powerpc/sysdev/dcr-low.S @@ -12,6 +12,7 @@ #include <asm/ppc_asm.h> #include <asm/processor.h> #include <asm/bug.h> +#include <asm/export.h> #define DCR_ACCESS_PROLOG(table) \ cmpli cr0,r3,1024; \ @@ -28,9 +29,11 @@ _GLOBAL(__mfdcr) DCR_ACCESS_PROLOG(__mfdcr_table) +EXPORT_SYMBOL(__mfdcr) _GLOBAL(__mtdcr) DCR_ACCESS_PROLOG(__mtdcr_table) +EXPORT_SYMBOL(__mtdcr) __mfdcr_table: mfdcr r3,0; blr diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 0ef9df49f0f2..d3a597456b6e 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -111,8 +111,7 @@ static struct pci_ops fsl_indirect_pcie_ops = .write = indirect_write_config, }; -#define MAX_PHYS_ADDR_BITS 40 -static u64 pci64_dma_offset = 1ull << MAX_PHYS_ADDR_BITS; +static u64 pci64_dma_offset; #ifdef CONFIG_SWIOTLB static void setup_swiotlb_ops(struct pci_controller *hose) @@ -132,12 +131,10 @@ static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask) return -EIO; /* - * Fixup PCI devices that are able to DMA to above the physical - * address width of the SoC such that we can address any internal - * SoC address from across PCI if needed + * Fix up PCI devices that are able to DMA to the large inbound + * mapping that allows addressing any RAM address from across PCI. */ - if ((dev_is_pci(dev)) && - dma_mask >= DMA_BIT_MASK(MAX_PHYS_ADDR_BITS)) { + if (dev_is_pci(dev) && dma_mask >= pci64_dma_offset * 2 - 1) { set_dma_ops(dev, &dma_direct_ops); set_dma_offset(dev, pci64_dma_offset); } @@ -387,6 +384,7 @@ static void setup_pci_atmu(struct pci_controller *hose) mem_log++; piwar = (piwar & ~PIWAR_SZ_MASK) | (mem_log - 1); + pci64_dma_offset = 1ULL << mem_log; if (setup_inbound) { /* Setup inbound memory window */ diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index a09ca704de58..d93056eedcb0 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -29,6 +29,7 @@ #include <linux/fsl_devices.h> #include <linux/fs_enet_pd.h> #include <linux/fs_uart_pd.h> +#include <linux/reboot.h> #include <linux/atomic.h> #include <asm/io.h> @@ -180,23 +181,38 @@ EXPORT_SYMBOL(get_baudrate); #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) static __be32 __iomem *rstcr; +static int fsl_rstcr_restart(struct notifier_block *this, + unsigned long mode, void *cmd) +{ + local_irq_disable(); + /* set reset control register */ + out_be32(rstcr, 0x2); /* HRESET_REQ */ + + return NOTIFY_DONE; +} + static int __init setup_rstcr(void) { struct device_node *np; + static struct notifier_block restart_handler = { + .notifier_call = fsl_rstcr_restart, + .priority = 128, + }; + for_each_node_by_name(np, "global-utilities") { if ((of_get_property(np, "fsl,has-rstcr", NULL))) { rstcr = of_iomap(np, 0) + 0xb0; - if (!rstcr) + if (!rstcr) { printk (KERN_ERR "Error: reset control " "register not mapped!\n"); + } else { + register_restart_handler(&restart_handler); + } break; } } - if (!rstcr && ppc_md.restart == fsl_rstcr_restart) - printk(KERN_ERR "No RSTCR register, warm reboot won't work\n"); - of_node_put(np); return 0; @@ -204,15 +220,6 @@ static int __init setup_rstcr(void) arch_initcall(setup_rstcr); -void __noreturn fsl_rstcr_restart(char *cmd) -{ - local_irq_disable(); - if (rstcr) - /* set reset control register */ - out_be32(rstcr, 0x2); /* HRESET_REQ */ - - while (1) ; -} #endif #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h index 433566a5ef19..d73daa4f0ccf 100644 --- a/arch/powerpc/sysdev/fsl_soc.h +++ b/arch/powerpc/sysdev/fsl_soc.h @@ -19,8 +19,6 @@ extern u32 fsl_get_sys_freq(void); struct spi_board_info; struct device_node; -extern void __noreturn fsl_rstcr_restart(char *cmd); - /* The different ports that the DIU can be connected to */ enum fsl_diu_monitor_port { FSL_DIU_PORT_DVI, /* DVI */ diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 4d48cecfedd1..b9aac951a90f 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1249,7 +1249,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, /* Pick the physical address from the device tree if unspecified */ if (!phys_addr) { /* Check if it is DCR-based */ - if (of_get_property(node, "dcr-reg", NULL)) { + if (of_property_read_bool(node, "dcr-reg")) { flags |= MPIC_USES_DCR; } else { struct resource r; |