summaryrefslogtreecommitdiff
path: root/arch/powerpc/oprofile/common.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/oprofile/common.c')
-rw-r--r--arch/powerpc/oprofile/common.c243
1 files changed, 0 insertions, 243 deletions
diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c
deleted file mode 100644
index 0fb528c2b3a1..000000000000
--- a/arch/powerpc/oprofile/common.c
+++ /dev/null
@@ -1,243 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * PPC 64 oprofile support:
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- * PPC 32 oprofile support: (based on PPC 64 support)
- * Copyright (C) Freescale Semiconductor, Inc 2004
- * Author: Andy Fleming
- *
- * Based on alpha version.
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/pmc.h>
-#include <asm/cputable.h>
-#include <asm/oprofile_impl.h>
-#include <asm/firmware.h>
-
-static struct op_powerpc_model *model;
-
-static struct op_counter_config ctr[OP_MAX_COUNTER];
-static struct op_system_config sys;
-
-static int op_per_cpu_rc;
-
-static void op_handle_interrupt(struct pt_regs *regs)
-{
- model->handle_interrupt(regs, ctr);
-}
-
-static void op_powerpc_cpu_setup(void *dummy)
-{
- int ret;
-
- ret = model->cpu_setup(ctr);
-
- if (ret != 0)
- op_per_cpu_rc = ret;
-}
-
-static int op_powerpc_setup(void)
-{
- int err;
-
- op_per_cpu_rc = 0;
-
- /* Grab the hardware */
- err = reserve_pmc_hardware(op_handle_interrupt);
- if (err)
- return err;
-
- /* Pre-compute the values to stuff in the hardware registers. */
- op_per_cpu_rc = model->reg_setup(ctr, &sys, model->num_counters);
-
- if (op_per_cpu_rc)
- goto out;
-
- /* Configure the registers on all cpus. If an error occurs on one
- * of the cpus, op_per_cpu_rc will be set to the error */
- on_each_cpu(op_powerpc_cpu_setup, NULL, 1);
-
-out: if (op_per_cpu_rc) {
- /* error on setup release the performance counter hardware */
- release_pmc_hardware();
- }
-
- return op_per_cpu_rc;
-}
-
-static void op_powerpc_shutdown(void)
-{
- release_pmc_hardware();
-}
-
-static void op_powerpc_cpu_start(void *dummy)
-{
- /* If any of the cpus have return an error, set the
- * global flag to the error so it can be returned
- * to the generic OProfile caller.
- */
- int ret;
-
- ret = model->start(ctr);
- if (ret != 0)
- op_per_cpu_rc = ret;
-}
-
-static int op_powerpc_start(void)
-{
- op_per_cpu_rc = 0;
-
- if (model->global_start)
- return model->global_start(ctr);
- if (model->start) {
- on_each_cpu(op_powerpc_cpu_start, NULL, 1);
- return op_per_cpu_rc;
- }
- return -EIO; /* No start function is defined for this
- power architecture */
-}
-
-static inline void op_powerpc_cpu_stop(void *dummy)
-{
- model->stop();
-}
-
-static void op_powerpc_stop(void)
-{
- if (model->stop)
- on_each_cpu(op_powerpc_cpu_stop, NULL, 1);
- if (model->global_stop)
- model->global_stop();
-}
-
-static int op_powerpc_create_files(struct dentry *root)
-{
- int i;
-
-#ifdef CONFIG_PPC64
- /*
- * There is one mmcr0, mmcr1 and mmcra for setting the events for
- * all of the counters.
- */
- oprofilefs_create_ulong(root, "mmcr0", &sys.mmcr0);
- oprofilefs_create_ulong(root, "mmcr1", &sys.mmcr1);
- oprofilefs_create_ulong(root, "mmcra", &sys.mmcra);
-#ifdef CONFIG_OPROFILE_CELL
- /* create a file the user tool can check to see what level of profiling
- * support exits with this kernel. Initialize bit mask to indicate
- * what support the kernel has:
- * bit 0 - Supports SPU event profiling in addition to PPU
- * event and cycles; and SPU cycle profiling
- * bits 1-31 - Currently unused.
- *
- * If the file does not exist, then the kernel only supports SPU
- * cycle profiling, PPU event and cycle profiling.
- */
- oprofilefs_create_ulong(root, "cell_support", &sys.cell_support);
- sys.cell_support = 0x1; /* Note, the user OProfile tool must check
- * that this bit is set before attempting to
- * user SPU event profiling. Older kernels
- * will not have this file, hence the user
- * tool is not allowed to do SPU event
- * profiling on older kernels. Older kernels
- * will accept SPU events but collected data
- * is garbage.
- */
-#endif
-#endif
-
- for (i = 0; i < model->num_counters; ++i) {
- struct dentry *dir;
- char buf[4];
-
- snprintf(buf, sizeof buf, "%d", i);
- dir = oprofilefs_mkdir(root, buf);
-
- oprofilefs_create_ulong(dir, "enabled", &ctr[i].enabled);
- oprofilefs_create_ulong(dir, "event", &ctr[i].event);
- oprofilefs_create_ulong(dir, "count", &ctr[i].count);
-
- /*
- * Classic PowerPC doesn't support per-counter
- * control like this, but the options are
- * expected, so they remain. For Freescale
- * Book-E style performance monitors, we do
- * support them.
- */
- oprofilefs_create_ulong(dir, "kernel", &ctr[i].kernel);
- oprofilefs_create_ulong(dir, "user", &ctr[i].user);
-
- oprofilefs_create_ulong(dir, "unit_mask", &ctr[i].unit_mask);
- }
-
- oprofilefs_create_ulong(root, "enable_kernel", &sys.enable_kernel);
- oprofilefs_create_ulong(root, "enable_user", &sys.enable_user);
-
- /* Default to tracing both kernel and user */
- sys.enable_kernel = 1;
- sys.enable_user = 1;
-
- return 0;
-}
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
- if (!cur_cpu_spec->oprofile_cpu_type)
- return -ENODEV;
-
- switch (cur_cpu_spec->oprofile_type) {
-#ifdef CONFIG_PPC_BOOK3S_64
-#ifdef CONFIG_OPROFILE_CELL
- case PPC_OPROFILE_CELL:
- if (firmware_has_feature(FW_FEATURE_LPAR))
- return -ENODEV;
- model = &op_model_cell;
- ops->sync_start = model->sync_start;
- ops->sync_stop = model->sync_stop;
- break;
-#endif
- case PPC_OPROFILE_POWER4:
- model = &op_model_power4;
- break;
- case PPC_OPROFILE_PA6T:
- model = &op_model_pa6t;
- break;
-#endif
-#ifdef CONFIG_PPC_BOOK3S_32
- case PPC_OPROFILE_G4:
- model = &op_model_7450;
- break;
-#endif
-#if defined(CONFIG_FSL_EMB_PERFMON)
- case PPC_OPROFILE_FSL_EMB:
- model = &op_model_fsl_emb;
- break;
-#endif
- default:
- return -ENODEV;
- }
-
- model->num_counters = cur_cpu_spec->num_pmcs;
-
- ops->cpu_type = cur_cpu_spec->oprofile_cpu_type;
- ops->create_files = op_powerpc_create_files;
- ops->setup = op_powerpc_setup;
- ops->shutdown = op_powerpc_shutdown;
- ops->start = op_powerpc_start;
- ops->stop = op_powerpc_stop;
- ops->backtrace = op_powerpc_backtrace;
-
- printk(KERN_DEBUG "oprofile: using %s performance monitoring.\n",
- ops->cpu_type);
-
- return 0;
-}
-
-void oprofile_arch_exit(void)
-{
-}
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-08 19:56:56 +0300