summaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel/exceptions-64s.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kernel/exceptions-64s.S')
-rw-r--r--arch/powerpc/kernel/exceptions-64s.S93
1 files changed, 49 insertions, 44 deletions
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index f7d748b88705..4d01f09ecf80 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1000,8 +1000,6 @@ TRAMP_REAL_BEGIN(system_reset_idle_wake)
* Vectors for the FWNMI option. Share common code.
*/
TRAMP_REAL_BEGIN(system_reset_fwnmi)
- /* XXX: fwnmi guest could run a nested/PR guest, so why no test? */
- __IKVM_REAL(system_reset)=0
GEN_INT_ENTRY system_reset, virt=0
#endif /* CONFIG_PPC_PSERIES */
@@ -1412,6 +1410,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
* If none is found, do a Linux page fault. Linux page faults can happen in
* kernel mode due to user copy operations of course.
*
+ * KVM: The KVM HDSI handler may perform a load with MSR[DR]=1 in guest
+ * MMU context, which may cause a DSI in the host, which must go to the
+ * KVM handler. MSR[IR] is not enabled, so the real-mode handler will
+ * always be used regardless of AIL setting.
+ *
* - Radix MMU
* The hardware loads from the Linux page table directly, so a fault goes
* immediately to Linux page fault.
@@ -1422,10 +1425,8 @@ INT_DEFINE_BEGIN(data_access)
IVEC=0x300
IDAR=1
IDSISR=1
-#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
IKVM_SKIP=1
IKVM_REAL=1
-#endif
INT_DEFINE_END(data_access)
EXC_REAL_BEGIN(data_access, 0x300, 0x80)
@@ -1464,6 +1465,8 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
* ppc64_bolted_size (first segment). The kernel handler must avoid stomping
* on user-handler data structures.
*
+ * KVM: Same as 0x300, DSLB must test for KVM guest.
+ *
* A dedicated save area EXSLB is used (XXX: but it actually need not be
* these days, we could use EXGEN).
*/
@@ -1472,10 +1475,8 @@ INT_DEFINE_BEGIN(data_access_slb)
IAREA=PACA_EXSLB
IRECONCILE=0
IDAR=1
-#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
IKVM_SKIP=1
IKVM_REAL=1
-#endif
INT_DEFINE_END(data_access_slb)
EXC_REAL_BEGIN(data_access_slb, 0x380, 0x80)
@@ -2951,15 +2952,8 @@ TRAMP_REAL_BEGIN(stf_barrier_fallback)
.endr
blr
-TRAMP_REAL_BEGIN(rfi_flush_fallback)
- SET_SCRATCH0(r13);
- GET_PACA(r13);
- std r1,PACA_EXRFI+EX_R12(r13)
- ld r1,PACAKSAVE(r13)
- std r9,PACA_EXRFI+EX_R9(r13)
- std r10,PACA_EXRFI+EX_R10(r13)
- std r11,PACA_EXRFI+EX_R11(r13)
- mfctr r9
+/* Clobbers r10, r11, ctr */
+.macro L1D_DISPLACEMENT_FLUSH
ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
ld r11,PACA_L1D_FLUSH_SIZE(r13)
srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
@@ -2970,7 +2964,7 @@ TRAMP_REAL_BEGIN(rfi_flush_fallback)
sync
/*
- * The load adresses are at staggered offsets within cachelines,
+ * The load addresses are at staggered offsets within cachelines,
* which suits some pipelines better (on others it should not
* hurt).
*/
@@ -2985,7 +2979,30 @@ TRAMP_REAL_BEGIN(rfi_flush_fallback)
ld r11,(0x80 + 8)*7(r10)
addi r10,r10,0x80*8
bdnz 1b
+.endm
+TRAMP_REAL_BEGIN(entry_flush_fallback)
+ std r9,PACA_EXRFI+EX_R9(r13)
+ std r10,PACA_EXRFI+EX_R10(r13)
+ std r11,PACA_EXRFI+EX_R11(r13)
+ mfctr r9
+ L1D_DISPLACEMENT_FLUSH
+ mtctr r9
+ ld r9,PACA_EXRFI+EX_R9(r13)
+ ld r10,PACA_EXRFI+EX_R10(r13)
+ ld r11,PACA_EXRFI+EX_R11(r13)
+ blr
+
+TRAMP_REAL_BEGIN(rfi_flush_fallback)
+ SET_SCRATCH0(r13);
+ GET_PACA(r13);
+ std r1,PACA_EXRFI+EX_R12(r13)
+ ld r1,PACAKSAVE(r13)
+ std r9,PACA_EXRFI+EX_R9(r13)
+ std r10,PACA_EXRFI+EX_R10(r13)
+ std r11,PACA_EXRFI+EX_R11(r13)
+ mfctr r9
+ L1D_DISPLACEMENT_FLUSH
mtctr r9
ld r9,PACA_EXRFI+EX_R9(r13)
ld r10,PACA_EXRFI+EX_R10(r13)
@@ -3003,32 +3020,7 @@ TRAMP_REAL_BEGIN(hrfi_flush_fallback)
std r10,PACA_EXRFI+EX_R10(r13)
std r11,PACA_EXRFI+EX_R11(r13)
mfctr r9
- ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
- ld r11,PACA_L1D_FLUSH_SIZE(r13)
- srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
- mtctr r11
- DCBT_BOOK3S_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
-
- /* order ld/st prior to dcbt stop all streams with flushing */
- sync
-
- /*
- * The load adresses are at staggered offsets within cachelines,
- * which suits some pipelines better (on others it should not
- * hurt).
- */
-1:
- ld r11,(0x80 + 8)*0(r10)
- ld r11,(0x80 + 8)*1(r10)
- ld r11,(0x80 + 8)*2(r10)
- ld r11,(0x80 + 8)*3(r10)
- ld r11,(0x80 + 8)*4(r10)
- ld r11,(0x80 + 8)*5(r10)
- ld r11,(0x80 + 8)*6(r10)
- ld r11,(0x80 + 8)*7(r10)
- addi r10,r10,0x80*8
- bdnz 1b
-
+ L1D_DISPLACEMENT_FLUSH
mtctr r9
ld r9,PACA_EXRFI+EX_R9(r13)
ld r10,PACA_EXRFI+EX_R10(r13)
@@ -3079,8 +3071,21 @@ TRAMP_REAL_BEGIN(rfscv_flush_fallback)
RFSCV
USE_TEXT_SECTION()
- MASKED_INTERRUPT
- MASKED_INTERRUPT hsrr=1
+
+_GLOBAL(do_uaccess_flush)
+ UACCESS_FLUSH_FIXUP_SECTION
+ nop
+ nop
+ nop
+ blr
+ L1D_DISPLACEMENT_FLUSH
+ blr
+_ASM_NOKPROBE_SYMBOL(do_uaccess_flush)
+EXPORT_SYMBOL(do_uaccess_flush)
+
+
+MASKED_INTERRUPT
+MASKED_INTERRUPT hsrr=1
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
kvmppc_skip_interrupt: