diff options
Diffstat (limited to 'arch/mips')
47 files changed, 332 insertions, 771 deletions
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms index e4f6e49417a9..584081df89c2 100644 --- a/arch/mips/Kbuild.platforms +++ b/arch/mips/Kbuild.platforms @@ -21,7 +21,6 @@ platform-$(CONFIG_MIPS_MALTA) += mti-malta/ platform-$(CONFIG_MACH_NINTENDO64) += n64/ platform-$(CONFIG_NLM_COMMON) += netlogic/ platform-$(CONFIG_PIC32MZDA) += pic32/ -platform-$(CONFIG_MACH_PISTACHIO) += pistachio/ platform-$(CONFIG_RALINK) += ralink/ platform-$(CONFIG_MIKROTIK_RB532) += rb532/ platform-$(CONFIG_SGI_IP22) += sgi-ip22/ diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 24e374266fdc..9b8ff6c2c1e3 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -514,35 +514,6 @@ config MACH_LOONGSON64 and Loongson-2F which will be removed), developed by the Institute of Computing Technology (ICT), Chinese Academy of Sciences (CAS). -config MACH_PISTACHIO - bool "IMG Pistachio SoC based boards" - select BOOT_ELF32 - select BOOT_RAW - select CEVT_R4K - select CLKSRC_MIPS_GIC - select COMMON_CLK - select CSRC_R4K - select DMA_NONCOHERENT - select GPIOLIB - select IRQ_MIPS_CPU - select MFD_SYSCON - select MIPS_CPU_SCACHE - select MIPS_GIC - select PINCTRL - select REGULATOR - select SYS_HAS_CPU_MIPS32_R2 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_MIPS_CPS - select SYS_SUPPORTS_MULTITHREADING - select SYS_SUPPORTS_RELOCATABLE - select SYS_SUPPORTS_ZBOOT - select SYS_HAS_EARLY_PRINTK - select USE_GENERIC_EARLY_PRINTK_8250 - select USE_OF - help - This enables support for the IMG Pistachio SoC platform. - config MIPS_MALTA bool "MIPS Malta board" select ARCH_MAY_HAVE_PC_FDC @@ -1089,7 +1060,6 @@ source "arch/mips/ingenic/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lantiq/Kconfig" source "arch/mips/pic32/Kconfig" -source "arch/mips/pistachio/Kconfig" source "arch/mips/ralink/Kconfig" source "arch/mips/sgi-ip27/Kconfig" source "arch/mips/sibyte/Kconfig" diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 653befc1b176..1fb97579b6b4 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -560,6 +560,9 @@ sead3micro_defconfig-y := micro32r2el_defconfig BOARDS=sead-3 legacy_defconfigs += xilfpga_defconfig xilfpga_defconfig-y := 32r2el_defconfig BOARDS=xilfpga +legacy_defconfigs += pistachio_defconfig +pistachio_defconfig-y := 32r2el_defconfig BOARDS=marduk + .PHONY: $(legacy_defconfigs) $(legacy_defconfigs): $(Q)$(MAKE) -f $(srctree)/Makefile $($@-y) diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c index 421d651433b6..1864eb935ca5 100644 --- a/arch/mips/alchemy/devboards/db1200.c +++ b/arch/mips/alchemy/devboards/db1200.c @@ -835,7 +835,7 @@ int __init db1200_dev_setup(void) if (!IS_ERR(c)) { pfc = clk_round_rate(c, 50000000); if ((pfc < 1) || (abs(50000000 - pfc) > 2500000)) - pr_warn("DB1200: cant get I2C close to 50MHz\n"); + pr_warn("DB1200: can't get I2C close to 50MHz\n"); else clk_set_rate(c, pfc); clk_prepare_enable(c); diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile index 60bd7d2a9ad8..be96d35eb582 100644 --- a/arch/mips/boot/dts/Makefile +++ b/arch/mips/boot/dts/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 subdir-$(CONFIG_BMIPS_GENERIC) += brcm subdir-$(CONFIG_CAVIUM_OCTEON_SOC) += cavium-octeon -subdir-$(CONFIG_MACH_PISTACHIO) += img +subdir-$(CONFIG_FIT_IMAGE_FDT_MARDUK) += img subdir-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += img subdir-$(CONFIG_MACH_INGENIC) += ingenic subdir-$(CONFIG_LANTIQ) += lantiq diff --git a/arch/mips/boot/dts/img/Makefile b/arch/mips/boot/dts/img/Makefile index 441a3c16efb0..ebb47490b04b 100644 --- a/arch/mips/boot/dts/img/Makefile +++ b/arch/mips/boot/dts/img/Makefile @@ -1,5 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += boston.dtb -dtb-$(CONFIG_MACH_PISTACHIO) += pistachio_marduk.dtb -obj-$(CONFIG_MACH_PISTACHIO) += pistachio_marduk.dtb.o +dtb-$(CONFIG_FIT_IMAGE_FDT_MARDUK) += pistachio_marduk.dtb diff --git a/arch/mips/boot/dts/img/pistachio.dtsi b/arch/mips/boot/dts/img/pistachio.dtsi index dc3b7909de73..b1db8b8f446f 100644 --- a/arch/mips/boot/dts/img/pistachio.dtsi +++ b/arch/mips/boot/dts/img/pistachio.dtsi @@ -900,6 +900,16 @@ }; }; + cpc: cpc@1bde0000 { + compatible = "mti,mips-cpc"; + reg = <0x1bde0000 0x10000>; + }; + + cdmm: cdmm@1bdf0000 { + compatible = "mti,mips-cdmm"; + reg = <0x1bdf0000 0x10000>; + }; + usb_phy: usb-phy { compatible = "img,pistachio-usb-phy"; clocks = <&clk_core CLK_USB_PHY>; diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi index 535a98284dcb..e51db651af13 100644 --- a/arch/mips/boot/dts/mscc/ocelot.dtsi +++ b/arch/mips/boot/dts/mscc/ocelot.dtsi @@ -150,36 +150,47 @@ port0: port@0 { reg = <0>; + status = "disabled"; }; port1: port@1 { reg = <1>; + status = "disabled"; }; port2: port@2 { reg = <2>; + status = "disabled"; }; port3: port@3 { reg = <3>; + status = "disabled"; }; port4: port@4 { reg = <4>; + status = "disabled"; }; port5: port@5 { reg = <5>; + status = "disabled"; }; port6: port@6 { reg = <6>; + status = "disabled"; }; port7: port@7 { reg = <7>; + status = "disabled"; }; port8: port@8 { reg = <8>; + status = "disabled"; }; port9: port@9 { reg = <9>; + status = "disabled"; }; port10: port@10 { reg = <10>; + status = "disabled"; }; }; }; diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts index 897de5025d7f..bd240690cb37 100644 --- a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts +++ b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts @@ -69,40 +69,52 @@ }; &port0 { + status = "okay"; phy-handle = <&phy0>; + phy-mode = "internal"; }; &port1 { + status = "okay"; phy-handle = <&phy1>; + phy-mode = "internal"; }; &port2 { + status = "okay"; phy-handle = <&phy2>; + phy-mode = "internal"; }; &port3 { + status = "okay"; phy-handle = <&phy3>; + phy-mode = "internal"; }; &port4 { + status = "okay"; phy-handle = <&phy7>; phy-mode = "sgmii"; phys = <&serdes 4 SERDES1G(2)>; }; &port5 { + status = "okay"; phy-handle = <&phy4>; phy-mode = "sgmii"; phys = <&serdes 5 SERDES1G(5)>; }; &port6 { + status = "okay"; phy-handle = <&phy6>; phy-mode = "sgmii"; phys = <&serdes 6 SERDES1G(3)>; }; &port9 { + status = "okay"; phy-handle = <&phy5>; phy-mode = "sgmii"; phys = <&serdes 9 SERDES1G(4)>; diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts index ef852f382da8..0185045c7630 100644 --- a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts +++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts @@ -47,17 +47,25 @@ }; &port0 { + status = "okay"; phy-handle = <&phy0>; + phy-mode = "internal"; }; &port1 { + status = "okay"; phy-handle = <&phy1>; + phy-mode = "internal"; }; &port2 { + status = "okay"; phy-handle = <&phy2>; + phy-mode = "internal"; }; &port3 { + status = "okay"; phy-handle = <&phy3>; + phy-mode = "internal"; }; diff --git a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c index e794b2d53adf..b63ad5d42cc7 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c +++ b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c @@ -44,7 +44,7 @@ static struct cvmx_bootmem_desc *cvmx_bootmem_desc; /* See header file for descriptions of functions */ -/** +/* * This macro returns a member of the * cvmx_bootmem_named_block_desc_t structure. These members can't * be directly addressed as they might be in memory not directly @@ -60,7 +60,7 @@ static struct cvmx_bootmem_desc *cvmx_bootmem_desc; offsetof(struct cvmx_bootmem_named_block_desc, field), \ sizeof_field(struct cvmx_bootmem_named_block_desc, field)) -/** +/* * This function is the implementation of the get macros defined * for individual structure members. The argument are generated * by the macros inorder to read only the needed memory. @@ -115,7 +115,7 @@ static uint64_t cvmx_bootmem_phy_get_next(uint64_t addr) return cvmx_read64_uint64((addr + NEXT_OFFSET) | (1ull << 63)); } -/** +/* * Allocate a block of memory from the free list that was * passed to the application by the bootloader within a specified * address range. This is an allocate-only algorithm, so @@ -550,7 +550,7 @@ bootmem_free_done: } -/** +/* * Finds a named memory block by name. * Also used for finding an unused entry in the named block table. * @@ -657,7 +657,7 @@ struct cvmx_bootmem_named_block_desc *cvmx_bootmem_find_named_block(char *name) } EXPORT_SYMBOL(cvmx_bootmem_find_named_block); -/** +/* * Frees a named block. * * @name: name of block to free diff --git a/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c b/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c index 3839feba68f2..20189e9ad94d 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c +++ b/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c @@ -42,14 +42,14 @@ #include <asm/octeon/cvmx-pexp-defs.h> #include <asm/octeon/cvmx-pko-defs.h> -/** +/* * This application uses this pointer to access the global queue * state. It points to a bootmem named block. */ __cvmx_cmd_queue_all_state_t *__cvmx_cmd_queue_state_ptr; EXPORT_SYMBOL_GPL(__cvmx_cmd_queue_state_ptr); -/** +/* * Initialize the Global queue state pointer. * * Returns CVMX_CMD_QUEUE_SUCCESS or a failure code @@ -57,27 +57,14 @@ EXPORT_SYMBOL_GPL(__cvmx_cmd_queue_state_ptr); static cvmx_cmd_queue_result_t __cvmx_cmd_queue_init_state_ptr(void) { char *alloc_name = "cvmx_cmd_queues"; -#if defined(CONFIG_CAVIUM_RESERVE32) && CONFIG_CAVIUM_RESERVE32 - extern uint64_t octeon_reserve32_memory; -#endif if (likely(__cvmx_cmd_queue_state_ptr)) return CVMX_CMD_QUEUE_SUCCESS; -#if defined(CONFIG_CAVIUM_RESERVE32) && CONFIG_CAVIUM_RESERVE32 - if (octeon_reserve32_memory) - __cvmx_cmd_queue_state_ptr = - cvmx_bootmem_alloc_named_range(sizeof(*__cvmx_cmd_queue_state_ptr), - octeon_reserve32_memory, - octeon_reserve32_memory + - (CONFIG_CAVIUM_RESERVE32 << - 20) - 1, 128, alloc_name); - else -#endif - __cvmx_cmd_queue_state_ptr = - cvmx_bootmem_alloc_named(sizeof(*__cvmx_cmd_queue_state_ptr), - 128, - alloc_name); + __cvmx_cmd_queue_state_ptr = + cvmx_bootmem_alloc_named(sizeof(*__cvmx_cmd_queue_state_ptr), + 128, + alloc_name); if (__cvmx_cmd_queue_state_ptr) memset(__cvmx_cmd_queue_state_ptr, 0, sizeof(*__cvmx_cmd_queue_state_ptr)); @@ -97,7 +84,7 @@ static cvmx_cmd_queue_result_t __cvmx_cmd_queue_init_state_ptr(void) return CVMX_CMD_QUEUE_SUCCESS; } -/** +/* * Initialize a command queue for use. The initial FPA buffer is * allocated and the hardware unit is configured to point to the * new command queue. @@ -195,7 +182,7 @@ cvmx_cmd_queue_result_t cvmx_cmd_queue_initialize(cvmx_cmd_queue_id_t queue_id, } } -/** +/* * Shutdown a queue a free it's command buffers to the FPA. The * hardware connected to the queue must be stopped before this * function is called. @@ -231,7 +218,7 @@ cvmx_cmd_queue_result_t cvmx_cmd_queue_shutdown(cvmx_cmd_queue_id_t queue_id) return CVMX_CMD_QUEUE_SUCCESS; } -/** +/* * Return the number of command words pending in the queue. This * function may be relatively slow for some hardware units. * @@ -287,7 +274,7 @@ int cvmx_cmd_queue_length(cvmx_cmd_queue_id_t queue_id) return CVMX_CMD_QUEUE_INVALID_PARAM; } -/** +/* * Return the command buffer to be written to. The purpose of this * function is to allow CVMX routine access t othe low level buffer * for initial hardware setup. User applications should not call this diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c index abd11b7af22f..1daa0c6b6f4e 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c @@ -44,7 +44,7 @@ #include <asm/octeon/cvmx-gmxx-defs.h> #include <asm/octeon/cvmx-asxx-defs.h> -/** +/* * Return the MII PHY address associated with the given IPD * port. A result of -1 means there isn't a MII capable PHY * connected to this port. On chips supporting multiple MII @@ -189,7 +189,7 @@ int cvmx_helper_board_get_mii_address(int ipd_port) return -1; } -/** +/* * This function is the board specific method of determining an * ethernet ports link speed. Most Octeon boards have Marvell PHYs * and are handled by the fall through case. This function must be @@ -274,7 +274,7 @@ union cvmx_helper_link_info __cvmx_helper_board_link_get(int ipd_port) return result; } -/** +/* * This function is called by cvmx_helper_interface_probe() after it * determines the number of ports Octeon can support on a specific * interface. This function is the per board location to override @@ -320,7 +320,7 @@ int __cvmx_helper_board_interface_probe(int interface, int supported_ports) return supported_ports; } -/** +/* * Get the clock type used for the USB block based on board type. * Used by the USB code for auto configuration of clock type. * diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c index c4b58598aa9d..a8c3be4eb6f0 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c @@ -42,7 +42,7 @@ #include <asm/octeon/cvmx-asxx-defs.h> #include <asm/octeon/cvmx-dbg-defs.h> -/** +/* * Probe RGMII ports and determine the number present * * @interface: Interface to probe @@ -88,7 +88,7 @@ int __cvmx_helper_rgmii_probe(int interface) return num_ports; } -/** +/* * Put an RGMII interface in loopback mode. Internal packets sent * out will be received back again on the same port. Externally * received packets will echo back out. @@ -120,7 +120,7 @@ void cvmx_helper_rgmii_internal_loopback(int port) cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); } -/** +/* * Workaround ASX setup errata with CN38XX pass1 * * @interface: Interface to setup @@ -148,7 +148,7 @@ static int __cvmx_helper_errata_asx_pass1(int interface, int port, return 0; } -/** +/* * Configure all of the ASX, GMX, and PKO registers required * to get RGMII to function on the supplied interface. * @@ -251,7 +251,7 @@ int __cvmx_helper_rgmii_enable(int interface) return 0; } -/** +/* * Return the link state of an IPD/PKO port as returned by * auto negotiation. The result of this function may not match * Octeon's link config if auto negotiation has changed since @@ -280,7 +280,7 @@ union cvmx_helper_link_info __cvmx_helper_rgmii_link_get(int ipd_port) return __cvmx_helper_board_link_get(ipd_port); } -/** +/* * Configure an IPD/PKO port for the specified link state. This * function does not influence auto negotiation at the PHY level. * The passed link state must always match the link state returned diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c index 842990e8404f..fea71a85bb29 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c @@ -54,7 +54,7 @@ int __cvmx_helper_xaui_enumerate(int interface) return 1; } -/** +/* * Probe a XAUI interface and determine the number of ports * connected to it. The XAUI interface should still be down * after this call. @@ -102,7 +102,7 @@ int __cvmx_helper_xaui_probe(int interface) return __cvmx_helper_xaui_enumerate(interface); } -/** +/* * Bringup and enable a XAUI interface. After this call packet * I/O should be fully functional. This is called with IPD * enabled but PKO disabled. @@ -249,7 +249,7 @@ int __cvmx_helper_xaui_enable(int interface) return 0; } -/** +/* * Return the link state of an IPD/PKO port as returned by * auto negotiation. The result of this function may not match * Octeon's link config if auto negotiation has changed since @@ -288,7 +288,7 @@ union cvmx_helper_link_info __cvmx_helper_xaui_link_get(int ipd_port) return result; } -/** +/* * Configure an IPD/PKO port for the specified link state. This * function does not influence auto negotiation at the PHY level. * The passed link state must always match the link state returned diff --git a/arch/mips/cavium-octeon/executive/cvmx-interrupt-decodes.c b/arch/mips/cavium-octeon/executive/cvmx-interrupt-decodes.c index 2f415d9d0f3c..67d6da21d49f 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-interrupt-decodes.c +++ b/arch/mips/cavium-octeon/executive/cvmx-interrupt-decodes.c @@ -46,7 +46,9 @@ /** - * __cvmx_interrupt_gmxx_rxx_int_en_enable enables all interrupt bits in cvmx_gmxx_rxx_int_en_t + * __cvmx_interrupt_gmxx_rxx_int_en_enable - enable all interrupt bits in cvmx_gmxx_rxx_int_en_t + * @index: interrupt register offset + * @block: interrupt register block_id */ void __cvmx_interrupt_gmxx_rxx_int_en_enable(int index, int block) { @@ -227,7 +229,9 @@ void __cvmx_interrupt_gmxx_rxx_int_en_enable(int index, int block) cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(index, block), gmx_rx_int_en.u64); } /** - * __cvmx_interrupt_pcsx_intx_en_reg_enable enables all interrupt bits in cvmx_pcsx_intx_en_reg_t + * __cvmx_interrupt_pcsx_intx_en_reg_enable - enable all interrupt bits in cvmx_pcsx_intx_en_reg_t + * @index: interrupt register offset + * @block: interrupt register block_id */ void __cvmx_interrupt_pcsx_intx_en_reg_enable(int index, int block) { @@ -268,7 +272,8 @@ void __cvmx_interrupt_pcsx_intx_en_reg_enable(int index, int block) cvmx_write_csr(CVMX_PCSX_INTX_EN_REG(index, block), pcs_int_en_reg.u64); } /** - * __cvmx_interrupt_pcsxx_int_en_reg_enable enables all interrupt bits in cvmx_pcsxx_int_en_reg_t + * __cvmx_interrupt_pcsxx_int_en_reg_enable - enable all interrupt bits in cvmx_pcsxx_int_en_reg_t + * @index: interrupt register block_id */ void __cvmx_interrupt_pcsxx_int_en_reg_enable(int index) { @@ -298,7 +303,8 @@ void __cvmx_interrupt_pcsxx_int_en_reg_enable(int index) } /** - * __cvmx_interrupt_spxx_int_msk_enable enables all interrupt bits in cvmx_spxx_int_msk_t + * __cvmx_interrupt_spxx_int_msk_enable - enable all interrupt bits in cvmx_spxx_int_msk_t + * @index: interrupt register block_id */ void __cvmx_interrupt_spxx_int_msk_enable(int index) { @@ -337,7 +343,8 @@ void __cvmx_interrupt_spxx_int_msk_enable(int index) cvmx_write_csr(CVMX_SPXX_INT_MSK(index), spx_int_msk.u64); } /** - * __cvmx_interrupt_stxx_int_msk_enable enables all interrupt bits in cvmx_stxx_int_msk_t + * __cvmx_interrupt_stxx_int_msk_enable - enable all interrupt bits in cvmx_stxx_int_msk_t + * @index: interrupt register block_id */ void __cvmx_interrupt_stxx_int_msk_enable(int index) { diff --git a/arch/mips/cavium-octeon/executive/cvmx-l2c.c b/arch/mips/cavium-octeon/executive/cvmx-l2c.c index 83df0a963a8b..33b303691bc2 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-l2c.c +++ b/arch/mips/cavium-octeon/executive/cvmx-l2c.c @@ -281,7 +281,7 @@ uint64_t cvmx_l2c_read_perf(uint32_t counter) } } -/** +/* * @INTERNAL * Helper function use to fault in cache lines for L2 cache locking * @@ -575,7 +575,7 @@ union __cvmx_l2c_tag { }; -/** +/* * @INTERNAL * Function to read a L2C tag. This code make the current core * the 'debug core' for the L2. This code must only be executed by @@ -764,9 +764,8 @@ int cvmx_l2c_get_cache_size_bytes(void) CVMX_CACHE_LINE_SIZE; } -/** +/* * Return log base 2 of the number of sets in the L2 cache - * Returns */ int cvmx_l2c_get_set_bits(void) { @@ -857,7 +856,7 @@ int cvmx_l2c_get_num_assoc(void) return l2_assoc; } -/** +/* * Flush a line from the L2 cache * This should only be called from one core at a time, as this routine * sets the core to the 'debug' core in order to flush the line. diff --git a/arch/mips/cavium-octeon/executive/cvmx-pko.c b/arch/mips/cavium-octeon/executive/cvmx-pko.c index b0efc35e95c4..7c4879e74318 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-pko.c +++ b/arch/mips/cavium-octeon/executive/cvmx-pko.c @@ -35,7 +35,7 @@ #include <asm/octeon/cvmx-pko.h> #include <asm/octeon/cvmx-helper.h> -/** +/* * Internal state of packet output */ @@ -176,7 +176,7 @@ static void __cvmx_pko_chip_init(void) } } -/** +/* * Call before any other calls to initialize the packet * output system. This does chip global config, and should only be * done by one core. @@ -229,7 +229,7 @@ void cvmx_pko_initialize_global(void) } } -/** +/* * This function does per-core initialization required by the PKO routines. * This must be called on all cores that will do packet output, and must * be called after the FPA has been initialized and filled with pages. @@ -243,7 +243,7 @@ int cvmx_pko_initialize_local(void) return 0; } -/** +/* * Enables the packet output hardware. It must already be * configured. */ @@ -266,7 +266,7 @@ void cvmx_pko_enable(void) cvmx_write_csr(CVMX_PKO_REG_FLAGS, flags.u64); } -/** +/* * Disables the packet output. Does not affect any configuration. */ void cvmx_pko_disable(void) @@ -278,7 +278,7 @@ void cvmx_pko_disable(void) } EXPORT_SYMBOL_GPL(cvmx_pko_disable); -/** +/* * Reset the packet output. */ static void __cvmx_pko_reset(void) @@ -289,7 +289,7 @@ static void __cvmx_pko_reset(void) cvmx_write_csr(CVMX_PKO_REG_FLAGS, pko_reg_flags.u64); } -/** +/* * Shutdown and free resources required by packet output. */ void cvmx_pko_shutdown(void) @@ -320,7 +320,7 @@ void cvmx_pko_shutdown(void) } EXPORT_SYMBOL_GPL(cvmx_pko_shutdown); -/** +/* * Configure a output port and the associated queues for use. * * @port: Port to configure. @@ -548,7 +548,7 @@ cvmx_pko_status_t cvmx_pko_config_port(uint64_t port, uint64_t base_queue, } #ifdef PKO_DEBUG -/** +/* * Show map of ports -> queues for different cores. */ void cvmx_pko_show_queue_map() @@ -573,7 +573,7 @@ void cvmx_pko_show_queue_map() } #endif -/** +/* * Rate limit a PKO port to a max packets/sec. This function is only * supported on CN51XX and higher, excluding CN58XX. * @@ -606,7 +606,7 @@ int cvmx_pko_rate_limit_packets(int port, int packets_s, int burst) return 0; } -/** +/* * Rate limit a PKO port to a max bits/sec. This function is only * supported on CN51XX and higher, excluding CN58XX. * diff --git a/arch/mips/cavium-octeon/executive/cvmx-spi.c b/arch/mips/cavium-octeon/executive/cvmx-spi.c index f51957a3e915..eb9333e84a6b 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-spi.c +++ b/arch/mips/cavium-octeon/executive/cvmx-spi.c @@ -66,7 +66,7 @@ static cvmx_spi_callbacks_t cvmx_spi_callbacks = { .interface_up_cb = cvmx_spi_interface_up_cb }; -/** +/* * Get current SPI4 initialization callbacks * * @callbacks: Pointer to the callbacks structure.to fill @@ -78,7 +78,7 @@ void cvmx_spi_get_callbacks(cvmx_spi_callbacks_t *callbacks) memcpy(callbacks, &cvmx_spi_callbacks, sizeof(cvmx_spi_callbacks)); } -/** +/* * Set new SPI4 initialization callbacks * * @new_callbacks: Pointer to an updated callbacks structure. @@ -88,7 +88,7 @@ void cvmx_spi_set_callbacks(cvmx_spi_callbacks_t *new_callbacks) memcpy(&cvmx_spi_callbacks, new_callbacks, sizeof(cvmx_spi_callbacks)); } -/** +/* * Initialize and start the SPI interface. * * @interface: The identifier of the packet interface to configure and @@ -133,7 +133,7 @@ int cvmx_spi_start_interface(int interface, cvmx_spi_mode_t mode, int timeout, return res; } -/** +/* * This routine restarts the SPI interface after it has lost synchronization * with its correspondent system. * @@ -179,7 +179,7 @@ int cvmx_spi_restart_interface(int interface, cvmx_spi_mode_t mode, int timeout) } EXPORT_SYMBOL_GPL(cvmx_spi_restart_interface); -/** +/* * Callback to perform SPI4 reset * * @interface: The identifier of the packet interface to configure and @@ -294,7 +294,7 @@ int cvmx_spi_reset_cb(int interface, cvmx_spi_mode_t mode) return 0; } -/** +/* * Callback to setup calendar and miscellaneous settings before clock detection * * @interface: The identifier of the packet interface to configure and @@ -413,7 +413,7 @@ int cvmx_spi_calendar_setup_cb(int interface, cvmx_spi_mode_t mode, return 0; } -/** +/* * Callback to perform clock detection * * @interface: The identifier of the packet interface to configure and @@ -491,7 +491,7 @@ int cvmx_spi_clock_detect_cb(int interface, cvmx_spi_mode_t mode, int timeout) return 0; } -/** +/* * Callback to perform link training * * @interface: The identifier of the packet interface to configure and @@ -560,7 +560,7 @@ int cvmx_spi_training_cb(int interface, cvmx_spi_mode_t mode, int timeout) return 0; } -/** +/* * Callback to perform calendar data synchronization * * @interface: The identifier of the packet interface to configure and @@ -617,7 +617,7 @@ int cvmx_spi_calendar_sync_cb(int interface, cvmx_spi_mode_t mode, int timeout) return 0; } -/** +/* * Callback to handle interface up * * @interface: The identifier of the packet interface to configure and diff --git a/arch/mips/cavium-octeon/flash_setup.c b/arch/mips/cavium-octeon/flash_setup.c index a5e8f4a784af..c8a8c6d359b9 100644 --- a/arch/mips/cavium-octeon/flash_setup.c +++ b/arch/mips/cavium-octeon/flash_setup.c @@ -62,7 +62,7 @@ static void octeon_flash_map_copy_to(struct map_info *map, unsigned long to, up(&octeon_bootbus_sem); } -/** +/* * Module/ driver initialization. * * Returns Zero on success diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index ce4e2806159b..00bf269763cf 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -284,11 +284,6 @@ void octeon_crash_smp_send_stop(void) #endif /* CONFIG_KEXEC */ -#ifdef CONFIG_CAVIUM_RESERVE32 -uint64_t octeon_reserve32_memory; -EXPORT_SYMBOL(octeon_reserve32_memory); -#endif - #ifdef CONFIG_KEXEC /* crashkernel cmdline parameter is parsed _after_ memory setup * we also parse it here (workaround for EHB5200) */ @@ -300,9 +295,10 @@ static int octeon_uart; extern asmlinkage void handle_int(void); /** - * Return non zero if we are currently running in the Octeon simulator + * octeon_is_simulation - Return non-zero if we are currently running + * in the Octeon simulator * - * Returns + * Return: non-0 if running in the Octeon simulator, 0 otherwise */ int octeon_is_simulation(void) { @@ -311,10 +307,10 @@ int octeon_is_simulation(void) EXPORT_SYMBOL(octeon_is_simulation); /** - * Return true if Octeon is in PCI Host mode. This means + * octeon_is_pci_host - Return true if Octeon is in PCI Host mode. This means * Linux can control the PCI bus. * - * Returns Non zero if Octeon in host mode. + * Return: Non-zero if Octeon is in host mode. */ int octeon_is_pci_host(void) { @@ -326,9 +322,9 @@ int octeon_is_pci_host(void) } /** - * Get the clock rate of Octeon + * octeon_get_clock_rate - Get the clock rate of Octeon * - * Returns Clock rate in HZ + * Return: Clock rate in HZ */ uint64_t octeon_get_clock_rate(void) { @@ -348,11 +344,11 @@ EXPORT_SYMBOL(octeon_get_io_clock_rate); /** - * Write to the LCD display connected to the bootbus. This display - * exists on most Cavium evaluation boards. If it doesn't exist, then - * this function doesn't do anything. - * + * octeon_write_lcd - Write to the LCD display connected to the bootbus. * @s: String to write + * + * This display exists on most Cavium evaluation boards. If it doesn't exist, + * then this function doesn't do anything. */ static void octeon_write_lcd(const char *s) { @@ -372,9 +368,9 @@ static void octeon_write_lcd(const char *s) } /** - * Return the console uart passed by the bootloader + * octeon_get_boot_uart - Return the console uart passed by the bootloader * - * Returns uart (0 or 1) + * Return: uart number (0 or 1) */ static int octeon_get_boot_uart(void) { @@ -383,9 +379,9 @@ static int octeon_get_boot_uart(void) } /** - * Get the coremask Linux was booted on. + * octeon_get_boot_coremask - Get the coremask Linux was booted on. * - * Returns Core mask + * Return: Core mask */ int octeon_get_boot_coremask(void) { @@ -393,7 +389,7 @@ int octeon_get_boot_coremask(void) } /** - * Check the hardware BIST results for a CPU + * octeon_check_cpu_bist - Check the hardware BIST results for a CPU */ void octeon_check_cpu_bist(void) { @@ -424,7 +420,7 @@ void octeon_check_cpu_bist(void) } /** - * Reboot Octeon + * octeon_restart - Reboot Octeon * * @command: Command to pass to the bootloader. Currently ignored. */ @@ -449,7 +445,7 @@ static void octeon_restart(char *command) /** - * Permanently stop a core. + * octeon_kill_core - Permanently stop a core. * * @arg: Ignored. */ @@ -469,7 +465,7 @@ static void octeon_kill_core(void *arg) /** - * Halt the system + * octeon_halt - Halt the system */ static void octeon_halt(void) { @@ -512,9 +508,9 @@ static void __init init_octeon_system_type(void) } /** - * Return a string representing the system type + * octeon_board_type_string - Return a string representing the system type * - * Returns + * Return: system type string */ const char *octeon_board_type_string(void) { @@ -655,7 +651,7 @@ void octeon_user_io_init(void) } /** - * Early entry point for arch setup + * prom_init - Early entry point for arch setup */ void __init prom_init(void) { @@ -665,9 +661,7 @@ void __init prom_init(void) int i; u64 t; int argc; -#ifdef CONFIG_CAVIUM_RESERVE32 - int64_t addr = -1; -#endif + /* * The bootloader passes a pointer to the boot descriptor in * $a3, this is available as fw_arg3. @@ -782,25 +776,6 @@ void __init prom_init(void) cvmx_write_csr(CVMX_LED_UDD_DATX(1), 0); cvmx_write_csr(CVMX_LED_EN, 1); } -#ifdef CONFIG_CAVIUM_RESERVE32 - /* - * We need to temporarily allocate all memory in the reserve32 - * region. This makes sure the kernel doesn't allocate this - * memory when it is getting memory from the - * bootloader. Later, after the memory allocations are - * complete, the reserve32 will be freed. - * - * Allocate memory for RESERVED32 aligned on 2MB boundary. This - * is in case we later use hugetlb entries with it. - */ - addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20, - 0, 0, 2 << 20, - "CAVIUM_RESERVE32", 0); - if (addr < 0) - pr_err("Failed to allocate CAVIUM_RESERVE32 memory area\n"); - else - octeon_reserve32_memory = addr; -#endif #ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2 if (cvmx_read_csr(CVMX_L2D_FUS3) & (3ull << 34)) { @@ -1078,16 +1053,6 @@ void __init plat_mem_setup(void) cvmx_bootmem_unlock(); #endif /* CONFIG_CRASH_DUMP */ -#ifdef CONFIG_CAVIUM_RESERVE32 - /* - * Now that we've allocated the kernel memory it is safe to - * free the reserved region. We free it here so that builtin - * drivers can use the memory. - */ - if (octeon_reserve32_memory) - cvmx_bootmem_free_named("CAVIUM_RESERVE32"); -#endif /* CONFIG_CAVIUM_RESERVE32 */ - if (total == 0) panic("Unable to allocate memory from " "cvmx_bootmem_phy_alloc"); diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index 66ce5527da54..89954f5f87fb 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -91,7 +91,7 @@ static irqreturn_t mailbox_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -/** +/* * Cause the function described by call_data to be executed on the passed * cpu. When the function has finished, increment the finished field of * call_data. @@ -115,7 +115,7 @@ static inline void octeon_send_ipi_mask(const struct cpumask *mask, octeon_send_ipi_single(i, action); } -/** +/* * Detect available CPUs, populate cpu_possible_mask */ static void octeon_smp_hotplug_setup(void) @@ -202,9 +202,8 @@ int plat_post_relocation(long offset) } #endif /* CONFIG_RELOCATABLE */ -/** +/* * Firmware CPU startup hook - * */ static int octeon_boot_secondary(int cpu, struct task_struct *idle) { @@ -232,7 +231,7 @@ static int octeon_boot_secondary(int cpu, struct task_struct *idle) return 0; } -/** +/* * After we've done initial boot, this function is called to allow the * board code to clean up state, if needed */ @@ -250,9 +249,8 @@ static void octeon_init_secondary(void) octeon_irq_setup_secondary(); } -/** +/* * Callout to firmware before smp_init - * */ static void __init octeon_prepare_cpus(unsigned int max_cpus) { @@ -268,7 +266,7 @@ static void __init octeon_prepare_cpus(unsigned int max_cpus) } } -/** +/* * Last chance for the board code to finish SMP initialization before * the CPU is "online". */ diff --git a/arch/mips/configs/generic/board-marduk.config b/arch/mips/configs/generic/board-marduk.config new file mode 100644 index 000000000000..05ca34cd5a73 --- /dev/null +++ b/arch/mips/configs/generic/board-marduk.config @@ -0,0 +1,53 @@ +CONFIG_FIT_IMAGE_FDT_MARDUK=y + +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y + +CONFIG_CLKSRC_PISTACHIO=y + +CONFIG_COMMON_CLK_PISTACHIO=y + +CONFIG_DMADEVICES=y +CONFIG_IMG_MDC_DMA=y + +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_PCH=y + +CONFIG_I2C=y +CONFIG_I2C_IMG=y + +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_PLTFM=y + +CONFIG_NETDEVICES=y +CONFIG_STMMAC_ETH=y +CONFIG_STMMAC_PLATFORM=y + +CONFIG_PHY_PISTACHIO_USB=y + +CONFIG_PINCTRL=y +CONFIG_PINCTRL_PISTACHIO=y + +CONFIG_RESET_PISTACHIO=y + +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_8250_DW=y + +CONFIG_SPI=y +CONFIG_SRAM=y + +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_DWC2=y + +CONFIG_CRYPTO_DEV_IMGTEC_HASH=y +CONFIG_IMGPDC_WDT=y +CONFIG_IR_IMG=y +CONFIG_CC10001_ADC=y +CONFIG_SND_SOC_IMG=y diff --git a/arch/mips/configs/pistachio_defconfig b/arch/mips/configs/pistachio_defconfig deleted file mode 100644 index b9adf15ebbec..000000000000 --- a/arch/mips/configs/pistachio_defconfig +++ /dev/null @@ -1,316 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_DEFAULT_HOSTNAME="localhost" -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT_VOLUNTARY=y -CONFIG_IKCONFIG=m -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=18 -CONFIG_CGROUPS=y -CONFIG_CGROUP_SCHED=y -CONFIG_CFS_BANDWIDTH=y -CONFIG_CGROUP_FREEZER=y -CONFIG_NAMESPACES=y -CONFIG_USER_NS=y -CONFIG_BLK_DEV_INITRD=y -# CONFIG_RD_BZIP2 is not set -# CONFIG_RD_LZMA is not set -# CONFIG_RD_LZO is not set -# CONFIG_RD_LZ4 is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_EMBEDDED=y -# CONFIG_COMPAT_BRK is not set -CONFIG_PROFILING=y -CONFIG_MACH_PISTACHIO=y -CONFIG_MIPS_CPS=y -CONFIG_NR_CPUS=4 -CONFIG_PM_DEBUG=y -CONFIG_PM_ADVANCED_DEBUG=y -CONFIG_CPU_IDLE=y -# CONFIG_MIPS_CPS_CPUIDLE is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_PARTITION_ADVANCED=y -# CONFIG_COMPACTION is not set -CONFIG_DEFAULT_MMAP_MIN_ADDR=32768 -CONFIG_ZSMALLOC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -# CONFIG_INET_DIAG is not set -CONFIG_TCP_CONG_ADVANCED=y -# CONFIG_TCP_CONG_BIC is not set -# CONFIG_TCP_CONG_WESTWOOD is not set -# CONFIG_TCP_CONG_HTCP is not set -CONFIG_TCP_CONG_LP=m -CONFIG_TCP_MD5SIG=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_IPV6_SIT=m -CONFIG_NETWORK_SECMARK=y -CONFIG_NETFILTER=y -# CONFIG_BRIDGE_NETFILTER is not set -CONFIG_NF_CONNTRACK=y -CONFIG_NF_CT_NETLINK=y -CONFIG_NETFILTER_XT_MARK=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y -CONFIG_NETFILTER_XT_TARGET_DSCP=y -CONFIG_NETFILTER_XT_TARGET_NFLOG=y -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y -CONFIG_NETFILTER_XT_TARGET_SECMARK=y -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y -CONFIG_NETFILTER_XT_MATCH_DSCP=y -CONFIG_NETFILTER_XT_MATCH_POLICY=y -CONFIG_NETFILTER_XT_MATCH_STATE=y -CONFIG_NF_NAT_IPV4=m -CONFIG_IP_NF_IPTABLES=y -CONFIG_IP_NF_FILTER=y -CONFIG_IP_NF_TARGET_REJECT=y -CONFIG_IP_NF_MANGLE=y -CONFIG_NF_NAT_IPV6=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_CODEL=m -CONFIG_NET_SCH_FQ_CODEL=m -CONFIG_NET_CLS_U32=m -CONFIG_CLS_U32_MARK=y -CONFIG_BT=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_HCIBTUSB=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIVHCI=m -CONFIG_CFG80211=m -CONFIG_NL80211_TESTMODE=y -CONFIG_CFG80211_DEBUGFS=y -CONFIG_CFG80211_WEXT=y -CONFIG_MAC80211=m -CONFIG_MAC80211_LEDS=y -CONFIG_MAC80211_DEBUGFS=y -CONFIG_MAC80211_DEBUG_MENU=y -CONFIG_MAC80211_VERBOSE_DEBUG=y -CONFIG_RFKILL=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_DEBUG_DEVRES=y -CONFIG_CONNECTOR=y -CONFIG_MTD=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BLOCK=y -CONFIG_ZRAM=m -CONFIG_BLK_DEV_LOOP=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=m -CONFIG_SCSI_SPI_ATTRS=y -CONFIG_MD=y -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=y -CONFIG_DM_VERITY=y -CONFIG_NETDEVICES=y -CONFIG_TUN=m -CONFIG_VETH=m -# CONFIG_NET_VENDOR_MARVELL is not set -# CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_MICROCHIP is not set -# CONFIG_NET_VENDOR_NATSEMI is not set -# CONFIG_NET_VENDOR_SEEQ is not set -# CONFIG_NET_VENDOR_SMSC is not set -CONFIG_STMMAC_ETH=y -# CONFIG_NET_VENDOR_VIA is not set -CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_RTL8152=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_SMSC75XX=m -CONFIG_USB_NET_SMSC95XX=m -CONFIG_USB_NET_MCS7830=m -# CONFIG_USB_NET_CDC_SUBSET is not set -# CONFIG_USB_NET_ZAURUS is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_LIBERTAS_THINFIRM=m -CONFIG_RT2X00=m -CONFIG_RT2800USB=m -CONFIG_MAC80211_HWSIM=m -CONFIG_USB_NET_RNDIS_WLAN=m -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_DW=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_HW_RANDOM=y -CONFIG_TCG_TPM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_IMG=y -CONFIG_I2C_STUB=m -CONFIG_SPI=y -CONFIG_SPI_BITBANG=m -CONFIG_SPI_IMG_SPFI=y -CONFIG_SPI_SPIDEV=y -CONFIG_DEBUG_GPIO=y -CONFIG_GPIO_SYSFS=y -CONFIG_POWER_SUPPLY=y -CONFIG_THERMAL=y -CONFIG_WATCHDOG=y -CONFIG_IMGPDC_WDT=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_GPIO=y -CONFIG_RC_CORE=y -CONFIG_RC_DEVICES=y -CONFIG_IR_IMG=y -CONFIG_IR_IMG_NEC=y -CONFIG_IR_IMG_JVC=y -CONFIG_IR_IMG_SONY=y -CONFIG_IR_IMG_SHARP=y -CONFIG_IR_IMG_SANYO=y -CONFIG_IR_IMG_RC5=y -CONFIG_IR_IMG_RC6=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_HRTIMER=m -CONFIG_SND_DYNAMIC_MINORS=y -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -# CONFIG_SND_SPI is not set -CONFIG_SND_USB_AUDIO=m -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -# CONFIG_USB_DEFAULT_PERSIST is not set -CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_ACM=y -CONFIG_USB_STORAGE=y -CONFIG_USB_DWC2=y -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_CP210X=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_OTI6858=m -CONFIG_USB_SERIAL_QUALCOMM=m -CONFIG_USB_SERIAL_SIERRAWIRELESS=m -CONFIG_USB_SERIAL_OPTION=m -CONFIG_MMC=y -CONFIG_MMC_BLOCK_MINORS=16 -CONFIG_MMC_TEST=m -CONFIG_MMC_DW=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_RTC_CLASS=y -CONFIG_DMADEVICES=y -CONFIG_IMG_MDC_DMA=y -CONFIG_STAGING=y -CONFIG_ASHMEM=y -# CONFIG_IOMMU_SUPPORT is not set -CONFIG_MEMORY=y -CONFIG_IIO=y -CONFIG_CC10001_ADC=y -CONFIG_PWM=y -CONFIG_PWM_IMG=y -CONFIG_PHY_PISTACHIO_USB=y -CONFIG_ANDROID=y -CONFIG_EXT4_FS=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -# CONFIG_DNOTIFY is not set -CONFIG_FUSE_FS=m -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_VFAT_FS=m -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_ECRYPT_FS=y -CONFIG_HFSPLUS_FS=m -CONFIG_UBIFS_FS=y -CONFIG_SQUASHFS=y -CONFIG_SQUASHFS_FILE_DIRECT=y -CONFIG_SQUASHFS_LZO=y -CONFIG_PSTORE=y -CONFIG_PSTORE_CONSOLE=y -CONFIG_PSTORE_RAM=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_SECURITY=y -CONFIG_SECURITY_NETWORK=y -CONFIG_SECURITY_YAMA=y -CONFIG_CRYPTO_AUTHENC=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_ARC4=y -CONFIG_CRYPTO_DES=y -CONFIG_CRC_CCITT=y -CONFIG_CRC_T10DIF=m -CONFIG_CRC7=m -# CONFIG_XZ_DEC_X86 is not set -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0 -# CONFIG_SCHED_DEBUG is not set -CONFIG_SCHEDSTATS=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_CREDENTIALS=y -CONFIG_FUNCTION_TRACER=y -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_LKDTM=y -CONFIG_TEST_UDELAY=m diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig index 657dd93c5e76..7dc5b3821cc6 100644 --- a/arch/mips/generic/Kconfig +++ b/arch/mips/generic/Kconfig @@ -58,6 +58,12 @@ config FIT_IMAGE_FDT_BOSTON enable this if you wish to boot on a MIPS Boston board, as it is expected by the bootloader. +config FIT_IMAGE_FDT_MARDUK + bool "Include FDT for IMG Pistachio Marduk (CI40) boards" + help + Enable this to include the FDT for the IMG Pistachio Marduk (CI40) + from Imagination Technologies in the FIT kernel image. + config FIT_IMAGE_FDT_NI169445 bool "Include FDT for NI 169445" help diff --git a/arch/mips/generic/Platform b/arch/mips/generic/Platform index b871af16b5b6..e1abc113b409 100644 --- a/arch/mips/generic/Platform +++ b/arch/mips/generic/Platform @@ -24,3 +24,4 @@ its-$(CONFIG_FIT_IMAGE_FDT_LUTON) += board-luton.its.S its-$(CONFIG_FIT_IMAGE_FDT_JAGUAR2) += board-jaguar2.its.S its-$(CONFIG_FIT_IMAGE_FDT_SERVAL) += board-serval.its.S its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += board-xilfpga.its.S +its-$(CONFIG_FIT_IMAGE_FDT_MARDUK) += board-marduk.its.S diff --git a/arch/mips/generic/board-ingenic.c b/arch/mips/generic/board-ingenic.c index 0cec0bea13d6..3f44f14bdb33 100644 --- a/arch/mips/generic/board-ingenic.c +++ b/arch/mips/generic/board-ingenic.c @@ -7,6 +7,8 @@ * Copyright (C) 2020 Paul Cercueil <paul@crapouillou.net> */ +#include <linux/clk.h> +#include <linux/of.h> #include <linux/of_address.h> #include <linux/of_fdt.h> #include <linux/pm.h> @@ -21,6 +23,10 @@ static __init char *ingenic_get_system_type(unsigned long machtype) { switch (machtype) { + case MACH_INGENIC_X2100: + return "X2100"; + case MACH_INGENIC_X2000H: + return "X2000H"; case MACH_INGENIC_X2000E: return "X2000E"; case MACH_INGENIC_X2000: @@ -37,8 +43,18 @@ static __init char *ingenic_get_system_type(unsigned long machtype) return "JZ4775"; case MACH_INGENIC_JZ4770: return "JZ4770"; + case MACH_INGENIC_JZ4760B: + return "JZ4760B"; + case MACH_INGENIC_JZ4760: + return "JZ4760"; + case MACH_INGENIC_JZ4755: + return "JZ4755"; + case MACH_INGENIC_JZ4750: + return "JZ4750"; case MACH_INGENIC_JZ4725B: return "JZ4725B"; + case MACH_INGENIC_JZ4730: + return "JZ4730"; default: return "JZ4740"; } @@ -61,8 +77,13 @@ static __init const void *ingenic_fixup_fdt(const void *fdt, const void *match_d } static const struct of_device_id ingenic_of_match[] __initconst = { + { .compatible = "ingenic,jz4730", .data = (void *)MACH_INGENIC_JZ4730 }, { .compatible = "ingenic,jz4740", .data = (void *)MACH_INGENIC_JZ4740 }, { .compatible = "ingenic,jz4725b", .data = (void *)MACH_INGENIC_JZ4725B }, + { .compatible = "ingenic,jz4750", .data = (void *)MACH_INGENIC_JZ4750 }, + { .compatible = "ingenic,jz4755", .data = (void *)MACH_INGENIC_JZ4755 }, + { .compatible = "ingenic,jz4760", .data = (void *)MACH_INGENIC_JZ4760 }, + { .compatible = "ingenic,jz4760b", .data = (void *)MACH_INGENIC_JZ4760B }, { .compatible = "ingenic,jz4770", .data = (void *)MACH_INGENIC_JZ4770 }, { .compatible = "ingenic,jz4775", .data = (void *)MACH_INGENIC_JZ4775 }, { .compatible = "ingenic,jz4780", .data = (void *)MACH_INGENIC_JZ4780 }, @@ -71,6 +92,8 @@ static const struct of_device_id ingenic_of_match[] __initconst = { { .compatible = "ingenic,x1830", .data = (void *)MACH_INGENIC_X1830 }, { .compatible = "ingenic,x2000", .data = (void *)MACH_INGENIC_X2000 }, { .compatible = "ingenic,x2000e", .data = (void *)MACH_INGENIC_X2000E }, + { .compatible = "ingenic,x2000h", .data = (void *)MACH_INGENIC_X2000H }, + { .compatible = "ingenic,x2100", .data = (void *)MACH_INGENIC_X2100 }, {} }; @@ -108,10 +131,36 @@ static const struct platform_suspend_ops ingenic_pm_ops __maybe_unused = { static int __init ingenic_pm_init(void) { + struct device_node *cpu_node; + struct clk *cpu0_clk; + int ret; + if (boot_cpu_type() == CPU_XBURST) { if (IS_ENABLED(CONFIG_PM_SLEEP)) suspend_set_ops(&ingenic_pm_ops); _machine_halt = ingenic_halt; + + /* + * Unconditionally enable the clock for the first CPU. + * This makes sure that the PLL that feeds the CPU won't be + * stopped while the kernel is running. + */ + cpu_node = of_get_cpu_node(0, NULL); + if (!cpu_node) { + pr_err("Unable to get CPU node\n"); + } else { + cpu0_clk = of_clk_get(cpu_node, 0); + if (IS_ERR(cpu0_clk)) { + pr_err("Unable to get CPU0 clock\n"); + return PTR_ERR(cpu0_clk); + } + + ret = clk_prepare_enable(cpu0_clk); + if (ret) { + pr_err("Unable to enable CPU0 clock\n"); + return ret; + } + } } return 0; diff --git a/arch/mips/generic/board-marduk.its.S b/arch/mips/generic/board-marduk.its.S new file mode 100644 index 000000000000..4f633794db90 --- /dev/null +++ b/arch/mips/generic/board-marduk.its.S @@ -0,0 +1,22 @@ +/ { + images { + fdt-marduk { + description = "img,pistachio-marduk Device Tree"; + data = /incbin/("boot/dts/img/pistachio_marduk.dtb"); + type = "flat_dt"; + arch = "mips"; + compression = "none"; + hash { + algo = "sha1"; + }; + }; + }; + + configurations { + conf-marduk { + description = "Marduk Linux kernel"; + kernel = "kernel"; + fdt = "fdt-marduk"; + }; + }; +}; diff --git a/arch/mips/generic/board-ocelot.c b/arch/mips/generic/board-ocelot.c index c238e95190ac..7115410acb4f 100644 --- a/arch/mips/generic/board-ocelot.c +++ b/arch/mips/generic/board-ocelot.c @@ -26,13 +26,13 @@ static __init bool ocelot_detect(void) tlb_probe_hazard(); idx = read_c0_index(); if (idx < 0) - return 0; + return false; /* A TLB entry exists, lets assume its usable and check the CHIP ID */ rev = __raw_readl((void __iomem *)DEVCPU_GCB_CHIP_REGS_CHIP_ID); if ((rev & CHIP_ID_PART_ID) != OCELOT_PART_ID) - return 0; + return false; /* Copy command line from bootloader early for Initrd detection */ if (fw_arg0 < 10 && (fw_arg1 & 0xFFF00000) == 0x80000000) { @@ -44,7 +44,7 @@ static __init bool ocelot_detect(void) strcpy(arcs_cmdline, prom_argv[1]); } - return 1; + return true; } static void __init ocelot_earlyprintk_init(void) diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h index 95e1f7f3597f..a0b9e7c1e4fc 100644 --- a/arch/mips/include/asm/atomic.h +++ b/arch/mips/include/asm/atomic.h @@ -206,7 +206,7 @@ ATOMIC_OPS(atomic64, xor, s64, ^=, xor, lld, scd) * The function returns the old value of @v minus @i. */ #define ATOMIC_SIP_OP(pfx, type, op, ll, sc) \ -static __inline__ int arch_##pfx##_sub_if_positive(type i, pfx##_t * v) \ +static __inline__ type arch_##pfx##_sub_if_positive(type i, pfx##_t * v) \ { \ type temp, result; \ \ diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h index 4c2e8173e6ec..2128ba903391 100644 --- a/arch/mips/include/asm/bootinfo.h +++ b/arch/mips/include/asm/bootinfo.h @@ -75,6 +75,7 @@ enum ingenic_machine_type { MACH_INGENIC_JZ4750, MACH_INGENIC_JZ4755, MACH_INGENIC_JZ4760, + MACH_INGENIC_JZ4760B, MACH_INGENIC_JZ4770, MACH_INGENIC_JZ4775, MACH_INGENIC_JZ4780, @@ -83,6 +84,8 @@ enum ingenic_machine_type { MACH_INGENIC_X1830, MACH_INGENIC_X2000, MACH_INGENIC_X2000E, + MACH_INGENIC_X2000H, + MACH_INGENIC_X2100, }; extern char *system_type; diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index 9e6211e6d76b..d45a52f65b7a 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -46,8 +46,8 @@ #define PRID_COMP_NETLOGIC 0x0c0000 #define PRID_COMP_CAVIUM 0x0d0000 #define PRID_COMP_LOONGSON 0x140000 -#define PRID_COMP_INGENIC_13 0x130000 /* X2000 */ -#define PRID_COMP_INGENIC_D0 0xd00000 /* JZ4740, JZ4750, X1830 */ +#define PRID_COMP_INGENIC_13 0x130000 /* X2000, X2100 */ +#define PRID_COMP_INGENIC_D0 0xd00000 /* JZ4730, JZ4740, JZ4750, JZ4755, JZ4760, X1830 */ #define PRID_COMP_INGENIC_D1 0xd10000 /* JZ4770, JZ4775, X1000 */ #define PRID_COMP_INGENIC_E1 0xe10000 /* JZ4780 */ diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c index 6c590ef27648..67e130d3f038 100644 --- a/arch/mips/kernel/mips-mt-fpaff.c +++ b/arch/mips/kernel/mips-mt-fpaff.c @@ -76,13 +76,13 @@ asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len, if (copy_from_user(&new_mask, user_mask_ptr, sizeof(new_mask))) return -EFAULT; - get_online_cpus(); + cpus_read_lock(); rcu_read_lock(); p = find_process_by_pid(pid); if (!p) { rcu_read_unlock(); - put_online_cpus(); + cpus_read_unlock(); return -ESRCH; } @@ -147,7 +147,7 @@ out_free_cpus_allowed: free_cpumask_var(cpus_allowed); out_put_task: put_task_struct(p); - put_online_cpus(); + cpus_read_unlock(); return retval; } @@ -166,7 +166,7 @@ asmlinkage long mipsmt_sys_sched_getaffinity(pid_t pid, unsigned int len, if (len < real_len) return -EINVAL; - get_online_cpus(); + cpus_read_lock(); rcu_read_lock(); retval = -ESRCH; @@ -182,7 +182,7 @@ asmlinkage long mipsmt_sys_sched_getaffinity(pid_t pid, unsigned int len, out_unlock: rcu_read_unlock(); - put_online_cpus(); + cpus_read_unlock(); if (retval) return retval; if (copy_to_user(user_mask_ptr, &mask, real_len)) diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 73c8e7990a97..95aa86fa6077 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -859,10 +859,10 @@ int mips_set_process_fp_mode(struct task_struct *task, unsigned int value) * scheduled in then it will already have picked up the new FP mode * whilst doing so. */ - get_online_cpus(); + cpus_read_lock(); for_each_cpu_and(cpu, &process_cpus, cpu_online_mask) work_on_cpu(cpu, prepare_for_fp_mode_switch, NULL); - put_online_cpus(); + cpus_read_unlock(); return 0; } diff --git a/arch/mips/kernel/uprobes.c b/arch/mips/kernel/uprobes.c index 6dbe4eab0a0e..9db2a6db5f62 100644 --- a/arch/mips/kernel/uprobes.c +++ b/arch/mips/kernel/uprobes.c @@ -75,7 +75,7 @@ bool is_trap_insn(uprobe_opcode_t *insn) case tlt_op: case tltu_op: case tne_op: - return 1; + return true; } break; @@ -87,12 +87,12 @@ bool is_trap_insn(uprobe_opcode_t *insn) case tlti_op: case tltiu_op: case tnei_op: - return 1; + return true; } break; } - return 0; + return false; } #define UPROBE_TRAP_NR ULONG_MAX @@ -254,9 +254,9 @@ unsigned long uprobe_get_swbp_addr(struct pt_regs *regs) * See if the instruction can be emulated. * Returns true if instruction was emulated, false otherwise. * - * For now we always emulate so this function just returns 0. + * For now we always emulate so this function just returns false. */ bool arch_uprobe_skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs) { - return 0; + return false; } diff --git a/arch/mips/kvm/Makefile b/arch/mips/kvm/Makefile index c67250a956b8..d3710959da55 100644 --- a/arch/mips/kvm/Makefile +++ b/arch/mips/kvm/Makefile @@ -2,21 +2,18 @@ # Makefile for KVM support for MIPS # -common-objs-y = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o eventfd.o binary_stats.o) +ccflags-y += -Ivirt/kvm -Iarch/mips/kvm -EXTRA_CFLAGS += -Ivirt/kvm -Iarch/mips/kvm +kvm-y := $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o eventfd.o binary_stats.o) +kvm-$(CONFIG_CPU_HAS_MSA) += msa.o -common-objs-$(CONFIG_CPU_HAS_MSA) += msa.o - -kvm-objs := $(common-objs-y) mips.o emulate.o entry.o \ +kvm-y += mips.o emulate.o entry.o \ interrupt.o stats.o \ fpu.o -kvm-objs += hypcall.o -kvm-objs += mmu.o -ifdef CONFIG_CPU_LOONGSON64 -kvm-objs += loongson_ipi.o -endif +kvm-y += hypcall.o +kvm-y += mmu.o +kvm-$(CONFIG_CPU_LOONGSON64) += loongson_ipi.o -kvm-objs += vz.o +kvm-y += vz.o obj-$(CONFIG_KVM) += kvm.o obj-y += callback.o tlb.o diff --git a/arch/mips/kvm/mmu.c b/arch/mips/kvm/mmu.c index 6d1f68cf4edf..1bfd1b501d82 100644 --- a/arch/mips/kvm/mmu.c +++ b/arch/mips/kvm/mmu.c @@ -442,7 +442,7 @@ static int kvm_mips_mkold_gpa_pt(struct kvm *kvm, gfn_t start_gfn, bool kvm_unmap_gfn_range(struct kvm *kvm, struct kvm_gfn_range *range) { kvm_mips_flush_gpa_pt(kvm, range->start, range->end); - return 1; + return true; } bool kvm_set_spte_gfn(struct kvm *kvm, struct kvm_gfn_range *range) @@ -486,7 +486,7 @@ bool kvm_test_age_gfn(struct kvm *kvm, struct kvm_gfn_range *range) pte_t *gpa_pte = kvm_mips_pte_for_gpa(kvm, NULL, gpa); if (!gpa_pte) - return 0; + return false; return pte_young(*gpa_pte); } diff --git a/arch/mips/loongson2ef/common/Makefile b/arch/mips/loongson2ef/common/Makefile index d5ab3e543ea3..30ea8b5ca685 100644 --- a/arch/mips/loongson2ef/common/Makefile +++ b/arch/mips/loongson2ef/common/Makefile @@ -4,12 +4,14 @@ # obj-y += setup.o init.o env.o time.o reset.o irq.o \ - bonito-irq.o mem.o machtype.o platform.o serial.o + bonito-irq.o mem.o machtype.o platform.o obj-$(CONFIG_PCI) += pci.o # # Serial port support # +obj-$(CONFIG_LOONGSON_UART_BASE) += serial.o +obj-$(CONFIG_EARLY_PRINTK) += serial.o obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o obj-$(CONFIG_LOONGSON_MC146818) += rtc.o diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c index 8ae181e08311..ec2ae501539a 100644 --- a/arch/mips/mm/c-octeon.c +++ b/arch/mips/mm/c-octeon.c @@ -30,7 +30,7 @@ unsigned long long cache_err_dcache[NR_CPUS]; EXPORT_SYMBOL_GPL(cache_err_dcache); -/** +/* * Octeon automatically flushes the dcache on tlb changes, so * from Linux's viewpoint it acts much like a physically * tagged cache. No flushing is needed @@ -56,8 +56,8 @@ static void local_octeon_flush_icache_range(unsigned long start, } /** - * Flush caches as necessary for all cores affected by a - * vma. If no vma is supplied, all cores are flushed. + * octeon_flush_icache_all_cores - Flush caches as necessary for all cores + * affected by a vma. If no vma is supplied, all cores are flushed. * * @vma: VMA to flush or NULL to flush all icaches. */ @@ -92,7 +92,7 @@ static void octeon_flush_icache_all_cores(struct vm_area_struct *vma) } -/** +/* * Called to flush the icache on all cores */ static void octeon_flush_icache_all(void) @@ -102,8 +102,7 @@ static void octeon_flush_icache_all(void) /** - * Called to flush all memory associated with a memory - * context. + * octeon_flush_cache_mm - flush all memory associated with a memory context. * * @mm: Memory context to flush */ @@ -116,7 +115,7 @@ static void octeon_flush_cache_mm(struct mm_struct *mm) } -/** +/* * Flush a range of kernel addresses out of the icache * */ @@ -127,11 +126,11 @@ static void octeon_flush_icache_range(unsigned long start, unsigned long end) /** - * Flush a range out of a vma + * octeon_flush_cache_range - Flush a range out of a vma * * @vma: VMA to flush - * @start: - * @end: + * @start: beginning address for flush + * @end: ending address for flush */ static void octeon_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) @@ -142,11 +141,11 @@ static void octeon_flush_cache_range(struct vm_area_struct *vma, /** - * Flush a specific page of a vma + * octeon_flush_cache_page - Flush a specific page of a vma * * @vma: VMA to flush page for * @page: Page to flush - * @pfn: + * @pfn: Page frame number */ static void octeon_flush_cache_page(struct vm_area_struct *vma, unsigned long page, unsigned long pfn) @@ -160,7 +159,7 @@ static void octeon_flush_kernel_vmap_range(unsigned long vaddr, int size) BUG(); } -/** +/* * Probe Octeon's caches * */ @@ -256,7 +255,7 @@ static void octeon_cache_error_setup(void) set_handler(0x100, &except_vec2_octeon, 0x80); } -/** +/* * Setup the Octeon cache flush routines * */ @@ -341,7 +340,7 @@ asmlinkage void cache_parity_error_octeon_recoverable(void) co_cache_error_call_notifiers(0); } -/** +/* * Called when the the exception is not recoverable */ diff --git a/arch/mips/mti-malta/malta-dtshim.c b/arch/mips/mti-malta/malta-dtshim.c index 0ddf03df6268..f451268f6c38 100644 --- a/arch/mips/mti-malta/malta-dtshim.c +++ b/arch/mips/mti-malta/malta-dtshim.c @@ -22,7 +22,7 @@ #define ROCIT_CONFIG_GEN1_MEMMAP_SHIFT 8 #define ROCIT_CONFIG_GEN1_MEMMAP_MASK (0xf << 8) -static unsigned char fdt_buf[16 << 10] __initdata; +static unsigned char fdt_buf[16 << 10] __initdata __aligned(8); /* determined physical memory size, not overridden by command line args */ extern unsigned long physical_memsize; diff --git a/arch/mips/netlogic/xlr/fmn-config.c b/arch/mips/netlogic/xlr/fmn-config.c index c7622c6e5f67..15483537e8cf 100644 --- a/arch/mips/netlogic/xlr/fmn-config.c +++ b/arch/mips/netlogic/xlr/fmn-config.c @@ -103,18 +103,19 @@ static void check_credit_distribution(void) } /** - * Configure bucket size and credits for a device. 'size' is the size of - * the buckets for the device. This size is distributed among all the CPUs - * so that all of them can send messages to the device. - * - * The device is also given 'cpu_credits' to send messages to the CPUs - * + * setup_fmn_cc - Configure bucket size and credits for a device. * @dev_info: FMN information structure for each devices * @start_stn_id: Starting station id of dev_info * @end_stn_id: End station id of dev_info * @num_buckets: Total number of buckets for den_info * @cpu_credits: Allowed credits to cpu for each devices pointing by dev_info * @size: Size of the each buckets in the device station + * + * 'size' is the size of the buckets for the device. This size is + * distributed among all the CPUs + * so that all of them can send messages to the device. + * + * The device is also given 'cpu_credits' to send messages to the CPUs */ static void setup_fmn_cc(struct xlr_fmn_info *dev_info, int start_stn_id, int end_stn_id, int num_buckets, int cpu_credits, int size) @@ -174,6 +175,8 @@ static void setup_cpu_fmninfo(struct xlr_fmn_info *cpu, int num_core) } /** + * xlr_board_info_setup - Setup FMN details + * * Setup the FMN details for each devices according to the device available * in each variant of XLR/XLS processor */ diff --git a/arch/mips/pistachio/Kconfig b/arch/mips/pistachio/Kconfig deleted file mode 100644 index 9a0e06c95184..000000000000 --- a/arch/mips/pistachio/Kconfig +++ /dev/null @@ -1,14 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -config PISTACHIO_GPTIMER_CLKSRC - bool "Enable General Purpose Timer based clocksource" - depends on MACH_PISTACHIO - select CLKSRC_PISTACHIO - select MIPS_EXTERNAL_TIMER - help - This option enables a clocksource driver based on a Pistachio - SoC General Purpose external timer. - - If you want to enable the CPUFreq, you need to enable - this option. - - If you don't want to enable CPUFreq, you can leave this disabled. diff --git a/arch/mips/pistachio/Makefile b/arch/mips/pistachio/Makefile deleted file mode 100644 index 66f4af17fb66..000000000000 --- a/arch/mips/pistachio/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -obj-y += init.o irq.o time.o diff --git a/arch/mips/pistachio/Platform b/arch/mips/pistachio/Platform deleted file mode 100644 index c59de86dbddf..000000000000 --- a/arch/mips/pistachio/Platform +++ /dev/null @@ -1,6 +0,0 @@ -# -# IMG Pistachio SoC -# -load-$(CONFIG_MACH_PISTACHIO) += 0xffffffff80400000 -zload-$(CONFIG_MACH_PISTACHIO) += 0xffffffff81000000 -all-$(CONFIG_MACH_PISTACHIO) := uImage.gz diff --git a/arch/mips/pistachio/init.c b/arch/mips/pistachio/init.c deleted file mode 100644 index e0bacfc3c6b4..000000000000 --- a/arch/mips/pistachio/init.c +++ /dev/null @@ -1,125 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Pistachio platform setup - * - * Copyright (C) 2014 Google, Inc. - * Copyright (C) 2016 Imagination Technologies - */ - -#include <linux/init.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> - -#include <asm/cacheflush.h> -#include <asm/fw/fw.h> -#include <asm/mips-boards/generic.h> -#include <asm/mips-cps.h> -#include <asm/prom.h> -#include <asm/smp-ops.h> -#include <asm/traps.h> - -/* - * Core revision register decoding - * Bits 23 to 20: Major rev - * Bits 15 to 8: Minor rev - * Bits 7 to 0: Maintenance rev - */ -#define PISTACHIO_CORE_REV_REG 0xB81483D0 -#define PISTACHIO_CORE_REV_A1 0x00100006 -#define PISTACHIO_CORE_REV_B0 0x00100106 - -const char *get_system_type(void) -{ - u32 core_rev; - const char *sys_type; - - core_rev = __raw_readl((const void *)PISTACHIO_CORE_REV_REG); - - switch (core_rev) { - case PISTACHIO_CORE_REV_B0: - sys_type = "IMG Pistachio SoC (B0)"; - break; - - case PISTACHIO_CORE_REV_A1: - sys_type = "IMG Pistachio SoC (A1)"; - break; - - default: - sys_type = "IMG Pistachio SoC"; - break; - } - - return sys_type; -} - -void __init *plat_get_fdt(void) -{ - if (fw_arg0 != -2) - panic("Device-tree not present"); - return (void *)fw_arg1; -} - -void __init plat_mem_setup(void) -{ - __dt_setup_arch(plat_get_fdt()); -} - -#define DEFAULT_CPC_BASE_ADDR 0x1bde0000 -#define DEFAULT_CDMM_BASE_ADDR 0x1bdd0000 - -phys_addr_t mips_cpc_default_phys_base(void) -{ - return DEFAULT_CPC_BASE_ADDR; -} - -phys_addr_t mips_cdmm_phys_base(void) -{ - return DEFAULT_CDMM_BASE_ADDR; -} - -static void __init mips_nmi_setup(void) -{ - void *base; - - base = cpu_has_veic ? - (void *)(CAC_BASE + 0xa80) : - (void *)(CAC_BASE + 0x380); - memcpy(base, except_vec_nmi, 0x80); - flush_icache_range((unsigned long)base, - (unsigned long)base + 0x80); -} - -static void __init mips_ejtag_setup(void) -{ - void *base; - extern char except_vec_ejtag_debug[]; - - base = cpu_has_veic ? - (void *)(CAC_BASE + 0xa00) : - (void *)(CAC_BASE + 0x300); - memcpy(base, except_vec_ejtag_debug, 0x80); - flush_icache_range((unsigned long)base, - (unsigned long)base + 0x80); -} - -void __init prom_init(void) -{ - board_nmi_handler_setup = mips_nmi_setup; - board_ejtag_handler_setup = mips_ejtag_setup; - - mips_cm_probe(); - mips_cpc_probe(); - register_cps_smp_ops(); - - pr_info("SoC Type: %s\n", get_system_type()); -} - -void __init device_tree_init(void) -{ - if (!initial_boot_params) - return; - - unflatten_and_copy_device_tree(); -} diff --git a/arch/mips/pistachio/irq.c b/arch/mips/pistachio/irq.c deleted file mode 100644 index 437c3101ac45..000000000000 --- a/arch/mips/pistachio/irq.c +++ /dev/null @@ -1,24 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Pistachio IRQ setup - * - * Copyright (C) 2014 Google, Inc. - */ - -#include <linux/init.h> -#include <linux/irqchip.h> -#include <linux/kernel.h> - -#include <asm/cpu-features.h> -#include <asm/irq_cpu.h> - -void __init arch_init_irq(void) -{ - pr_info("EIC is %s\n", cpu_has_veic ? "on" : "off"); - pr_info("VINT is %s\n", cpu_has_vint ? "on" : "off"); - - if (!cpu_has_veic) - mips_cpu_irq_init(); - - irqchip_init(); -} diff --git a/arch/mips/pistachio/time.c b/arch/mips/pistachio/time.c deleted file mode 100644 index de64751dec40..000000000000 --- a/arch/mips/pistachio/time.c +++ /dev/null @@ -1,55 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Pistachio clocksource/timer setup - * - * Copyright (C) 2014 Google, Inc. - */ - -#include <linux/clk.h> -#include <linux/clocksource.h> -#include <linux/init.h> -#include <linux/of.h> -#include <linux/of_clk.h> - -#include <asm/mips-cps.h> -#include <asm/time.h> - -unsigned int get_c0_compare_int(void) -{ - return gic_get_c0_compare_int(); -} - -int get_c0_perfcount_int(void) -{ - return gic_get_c0_perfcount_int(); -} -EXPORT_SYMBOL_GPL(get_c0_perfcount_int); - -int get_c0_fdc_int(void) -{ - return gic_get_c0_fdc_int(); -} - -void __init plat_time_init(void) -{ - struct device_node *np; - struct clk *clk; - - of_clk_init(NULL); - timer_probe(); - - np = of_get_cpu_node(0, NULL); - if (!np) { - pr_err("Failed to get CPU node\n"); - return; - } - - clk = of_clk_get(np, 0); - if (IS_ERR(clk)) { - pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk)); - return; - } - - mips_hpt_frequency = clk_get_rate(clk) / 2; - clk_put(clk); -} |