diff options
Diffstat (limited to 'arch/mips/kernel/octeon_switch.S')
-rw-r--r-- | arch/mips/kernel/octeon_switch.S | 218 |
1 files changed, 138 insertions, 80 deletions
diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S index f6547680c81c..423ae83af1fb 100644 --- a/arch/mips/kernel/octeon_switch.S +++ b/arch/mips/kernel/octeon_switch.S @@ -31,15 +31,11 @@ /* * check if we need to save FPU registers */ - PTR_L t3, TASK_THREAD_INFO(a0) - LONG_L t0, TI_FLAGS(t3) - li t1, _TIF_USEDFPU - and t2, t0, t1 - beqz t2, 1f - nor t1, zero, t1 - - and t0, t0, t1 - LONG_S t0, TI_FLAGS(t3) + .set push + .set noreorder + beqz a3, 1f + PTR_L t3, TASK_THREAD_INFO(a0) + .set pop /* * clear saved user stack CU1 bit @@ -56,36 +52,9 @@ .set pop 1: - /* check if we need to save COP2 registers */ - PTR_L t2, TASK_THREAD_INFO(a0) - LONG_L t0, ST_OFF(t2) - bbit0 t0, 30, 1f - - /* Disable COP2 in the stored process state */ - li t1, ST0_CU2 - xor t0, t1 - LONG_S t0, ST_OFF(t2) - - /* Enable COP2 so we can save it */ - mfc0 t0, CP0_STATUS - or t0, t1 - mtc0 t0, CP0_STATUS - - /* Save COP2 */ - daddu a0, THREAD_CP2 - jal octeon_cop2_save - dsubu a0, THREAD_CP2 - - /* Disable COP2 now that we are done */ - mfc0 t0, CP0_STATUS - li t1, ST0_CU2 - xor t0, t1 - mtc0 t0, CP0_STATUS - -1: #if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0 /* Check if we need to store CVMSEG state */ - mfc0 t0, $11,7 /* CvmMemCtl */ + dmfc0 t0, $11,7 /* CvmMemCtl */ bbit0 t0, 6, 3f /* Is user access enabled? */ /* Store the CVMSEG state */ @@ -109,9 +78,9 @@ .set reorder /* Disable access to CVMSEG */ - mfc0 t0, $11,7 /* CvmMemCtl */ + dmfc0 t0, $11,7 /* CvmMemCtl */ xori t0, t0, 0x40 /* Bit 6 is CVMSEG user enable */ - mtc0 t0, $11,7 /* CvmMemCtl */ + dmtc0 t0, $11,7 /* CvmMemCtl */ #endif 3: @@ -147,6 +116,8 @@ * void octeon_cop2_save(struct octeon_cop2_state *a0) */ .align 7 + .set push + .set noreorder LEAF(octeon_cop2_save) dmfc0 t9, $9,7 /* CvmCtl register. */ @@ -157,17 +128,17 @@ dmfc2 t2, 0x0200 sd t0, OCTEON_CP2_CRC_IV(a0) sd t1, OCTEON_CP2_CRC_LENGTH(a0) - sd t2, OCTEON_CP2_CRC_POLY(a0) /* Skip next instructions if CvmCtl[NODFA_CP2] set */ bbit1 t9, 28, 1f + sd t2, OCTEON_CP2_CRC_POLY(a0) /* Save the LLM state */ dmfc2 t0, 0x0402 dmfc2 t1, 0x040A sd t0, OCTEON_CP2_LLM_DAT(a0) - sd t1, OCTEON_CP2_LLM_DAT+8(a0) 1: bbit1 t9, 26, 3f /* done if CvmCtl[NOCRYPTO] set */ + sd t1, OCTEON_CP2_LLM_DAT+8(a0) /* Save the COP2 crypto state */ /* this part is mostly common to both pass 1 and later revisions */ @@ -198,18 +169,20 @@ sd t2, OCTEON_CP2_AES_KEY+16(a0) dmfc2 t2, 0x0101 sd t3, OCTEON_CP2_AES_KEY+24(a0) - mfc0 t3, $15,0 /* Get the processor ID register */ + mfc0 v0, $15,0 /* Get the processor ID register */ sd t0, OCTEON_CP2_AES_KEYLEN(a0) - li t0, 0x000d0000 /* This is the processor ID of Octeon Pass1 */ + li v1, 0x000d0000 /* This is the processor ID of Octeon Pass1 */ sd t1, OCTEON_CP2_AES_RESULT(a0) - sd t2, OCTEON_CP2_AES_RESULT+8(a0) /* Skip to the Pass1 version of the remainder of the COP2 state */ - beq t3, t0, 2f + beq v0, v1, 2f + sd t2, OCTEON_CP2_AES_RESULT+8(a0) /* the non-pass1 state when !CvmCtl[NOCRYPTO] */ dmfc2 t1, 0x0240 dmfc2 t2, 0x0241 + ori v1, v1, 0x9500 /* lowest OCTEON III PrId*/ dmfc2 t3, 0x0242 + subu v1, v0, v1 /* prid - lowest OCTEON III PrId */ dmfc2 t0, 0x0243 sd t1, OCTEON_CP2_HSH_DATW(a0) dmfc2 t1, 0x0244 @@ -262,8 +235,16 @@ sd t1, OCTEON_CP2_GFM_MULT+8(a0) sd t2, OCTEON_CP2_GFM_POLY(a0) sd t3, OCTEON_CP2_GFM_RESULT(a0) - sd t0, OCTEON_CP2_GFM_RESULT+8(a0) + bltz v1, 4f + sd t0, OCTEON_CP2_GFM_RESULT+8(a0) + /* OCTEON III things*/ + dmfc2 t0, 0x024F + dmfc2 t1, 0x0050 + sd t0, OCTEON_CP2_SHA3(a0) + sd t1, OCTEON_CP2_SHA3+8(a0) +4: jr ra + nop 2: /* pass 1 special stuff when !CvmCtl[NOCRYPTO] */ dmfc2 t3, 0x0040 @@ -289,7 +270,9 @@ 3: /* pass 1 or CvmCtl[NOCRYPTO] set */ jr ra + nop END(octeon_cop2_save) + .set pop /* * void octeon_cop2_restore(struct octeon_cop2_state *a0) @@ -354,9 +337,9 @@ ld t2, OCTEON_CP2_AES_RESULT+8(a0) mfc0 t3, $15,0 /* Get the processor ID register */ dmtc2 t0, 0x0110 - li t0, 0x000d0000 /* This is the processor ID of Octeon Pass1 */ + li v0, 0x000d0000 /* This is the processor ID of Octeon Pass1 */ dmtc2 t1, 0x0100 - bne t0, t3, 3f /* Skip the next stuff for non-pass1 */ + bne v0, t3, 3f /* Skip the next stuff for non-pass1 */ dmtc2 t2, 0x0101 /* this code is specific for pass 1 */ @@ -384,6 +367,7 @@ 3: /* this is post-pass1 code */ ld t2, OCTEON_CP2_HSH_DATW(a0) + ori v0, v0, 0x9500 /* lowest OCTEON III PrId*/ ld t0, OCTEON_CP2_HSH_DATW+8(a0) ld t1, OCTEON_CP2_HSH_DATW+16(a0) dmtc2 t2, 0x0240 @@ -437,9 +421,15 @@ dmtc2 t2, 0x0259 ld t2, OCTEON_CP2_GFM_RESULT+8(a0) dmtc2 t0, 0x025E + subu v0, t3, v0 /* prid - lowest OCTEON III PrId */ dmtc2 t1, 0x025A - dmtc2 t2, 0x025B - + bltz v0, done_restore + dmtc2 t2, 0x025B + /* OCTEON III things*/ + ld t0, OCTEON_CP2_SHA3(a0) + ld t1, OCTEON_CP2_SHA3+8(a0) + dmtc2 t0, 0x0051 + dmtc2 t1, 0x0050 done_restore: jr ra nop @@ -450,18 +440,23 @@ done_restore: * void octeon_mult_save() * sp is assumed to point to a struct pt_regs * - * NOTE: This is called in SAVE_SOME in stackframe.h. It can only - * safely modify k0 and k1. + * NOTE: This is called in SAVE_TEMP in stackframe.h. It can + * safely modify v1,k0, k1,$10-$15, and $24. It will + * be overwritten with a processor specific version of the code. */ - .align 7 + .p2align 7 .set push .set noreorder LEAF(octeon_mult_save) - dmfc0 k0, $9,7 /* CvmCtl register. */ - bbit1 k0, 27, 1f /* Skip CvmCtl[NOMUL] */ + jr ra nop + .space 30 * 4, 0 +octeon_mult_save_end: + EXPORT(octeon_mult_save_end) + END(octeon_mult_save) - /* Save the multiplier state */ + LEAF(octeon_mult_save2) + /* Save the multiplier state OCTEON II and earlier*/ v3mulu k0, $0, $0 v3mulu k1, $0, $0 sd k0, PT_MTP(sp) /* PT_MTP has P0 */ @@ -476,44 +471,107 @@ done_restore: sd k0, PT_MPL+8(sp) /* PT_MPL+8 has MPL1 */ jr ra sd k1, PT_MPL+16(sp) /* PT_MPL+16 has MPL2 */ - -1: /* Resume here if CvmCtl[NOMUL] */ +octeon_mult_save2_end: + EXPORT(octeon_mult_save2_end) + END(octeon_mult_save2) + + LEAF(octeon_mult_save3) + /* Save the multiplier state OCTEON III */ + v3mulu $10, $0, $0 /* read P0 */ + v3mulu $11, $0, $0 /* read P1 */ + v3mulu $12, $0, $0 /* read P2 */ + sd $10, PT_MTP+(0*8)(sp) /* store P0 */ + v3mulu $10, $0, $0 /* read P3 */ + sd $11, PT_MTP+(1*8)(sp) /* store P1 */ + v3mulu $11, $0, $0 /* read P4 */ + sd $12, PT_MTP+(2*8)(sp) /* store P2 */ + ori $13, $0, 1 + v3mulu $12, $0, $0 /* read P5 */ + sd $10, PT_MTP+(3*8)(sp) /* store P3 */ + v3mulu $13, $13, $0 /* P4-P0 = MPL5-MPL1, $13 = MPL0 */ + sd $11, PT_MTP+(4*8)(sp) /* store P4 */ + v3mulu $10, $0, $0 /* read MPL1 */ + sd $12, PT_MTP+(5*8)(sp) /* store P5 */ + v3mulu $11, $0, $0 /* read MPL2 */ + sd $13, PT_MPL+(0*8)(sp) /* store MPL0 */ + v3mulu $12, $0, $0 /* read MPL3 */ + sd $10, PT_MPL+(1*8)(sp) /* store MPL1 */ + v3mulu $10, $0, $0 /* read MPL4 */ + sd $11, PT_MPL+(2*8)(sp) /* store MPL2 */ + v3mulu $11, $0, $0 /* read MPL5 */ + sd $12, PT_MPL+(3*8)(sp) /* store MPL3 */ + sd $10, PT_MPL+(4*8)(sp) /* store MPL4 */ jr ra - END(octeon_mult_save) + sd $11, PT_MPL+(5*8)(sp) /* store MPL5 */ +octeon_mult_save3_end: + EXPORT(octeon_mult_save3_end) + END(octeon_mult_save3) .set pop /* * void octeon_mult_restore() * sp is assumed to point to a struct pt_regs * - * NOTE: This is called in RESTORE_SOME in stackframe.h. + * NOTE: This is called in RESTORE_TEMP in stackframe.h. */ - .align 7 + .p2align 7 .set push .set noreorder LEAF(octeon_mult_restore) - dmfc0 k1, $9,7 /* CvmCtl register. */ - ld v0, PT_MPL(sp) /* MPL0 */ - ld v1, PT_MPL+8(sp) /* MPL1 */ - ld k0, PT_MPL+16(sp) /* MPL2 */ - bbit1 k1, 27, 1f /* Skip CvmCtl[NOMUL] */ - /* Normally falls through, so no time wasted here */ - nop + jr ra + nop + .space 30 * 4, 0 +octeon_mult_restore_end: + EXPORT(octeon_mult_restore_end) + END(octeon_mult_restore) + LEAF(octeon_mult_restore2) + ld v0, PT_MPL(sp) /* MPL0 */ + ld v1, PT_MPL+8(sp) /* MPL1 */ + ld k0, PT_MPL+16(sp) /* MPL2 */ /* Restore the multiplier state */ - ld k1, PT_MTP+16(sp) /* P2 */ - MTM0 v0 /* MPL0 */ + ld k1, PT_MTP+16(sp) /* P2 */ + mtm0 v0 /* MPL0 */ ld v0, PT_MTP+8(sp) /* P1 */ - MTM1 v1 /* MPL1 */ - ld v1, PT_MTP(sp) /* P0 */ - MTM2 k0 /* MPL2 */ - MTP2 k1 /* P2 */ - MTP1 v0 /* P1 */ + mtm1 v1 /* MPL1 */ + ld v1, PT_MTP(sp) /* P0 */ + mtm2 k0 /* MPL2 */ + mtp2 k1 /* P2 */ + mtp1 v0 /* P1 */ jr ra - MTP0 v1 /* P0 */ - -1: /* Resume here if CvmCtl[NOMUL] */ + mtp0 v1 /* P0 */ +octeon_mult_restore2_end: + EXPORT(octeon_mult_restore2_end) + END(octeon_mult_restore2) + + LEAF(octeon_mult_restore3) + ld $12, PT_MPL+(0*8)(sp) /* read MPL0 */ + ld $13, PT_MPL+(3*8)(sp) /* read MPL3 */ + ld $10, PT_MPL+(1*8)(sp) /* read MPL1 */ + ld $11, PT_MPL+(4*8)(sp) /* read MPL4 */ + .word 0x718d0008 + /* mtm0 $12, $13 restore MPL0 and MPL3 */ + ld $12, PT_MPL+(2*8)(sp) /* read MPL2 */ + .word 0x714b000c + /* mtm1 $10, $11 restore MPL1 and MPL4 */ + ld $13, PT_MPL+(5*8)(sp) /* read MPL5 */ + ld $10, PT_MTP+(0*8)(sp) /* read P0 */ + ld $11, PT_MTP+(3*8)(sp) /* read P3 */ + .word 0x718d000d + /* mtm2 $12, $13 restore MPL2 and MPL5 */ + ld $12, PT_MTP+(1*8)(sp) /* read P1 */ + .word 0x714b0009 + /* mtp0 $10, $11 restore P0 and P3 */ + ld $13, PT_MTP+(4*8)(sp) /* read P4 */ + ld $10, PT_MTP+(2*8)(sp) /* read P2 */ + ld $11, PT_MTP+(5*8)(sp) /* read P5 */ + .word 0x718d000a + /* mtp1 $12, $13 restore P1 and P4 */ jr ra - nop - END(octeon_mult_restore) + .word 0x714b000b + /* mtp2 $10, $11 restore P2 and P5 */ + +octeon_mult_restore3_end: + EXPORT(octeon_mult_restore3_end) + END(octeon_mult_restore3) .set pop |