diff options
Diffstat (limited to 'arch/mips/Kconfig')
| -rw-r--r-- | arch/mips/Kconfig | 111 |
1 files changed, 8 insertions, 103 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 771ca53af06d..86510741d49d 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -47,7 +47,6 @@ config MIPS select GENERIC_SMP_IDLE_THREAD select GENERIC_TIME_VSYSCALL select GUP_GET_PTE_LOW_HIGH if CPU_MIPS32 && PHYS_ADDR_T_64BIT - select HANDLE_DOMAIN_IRQ select HAVE_ARCH_COMPILER_H select HAVE_ARCH_JUMP_LABEL select HAVE_ARCH_KGDB if MIPS_FP_SUPPORT @@ -57,7 +56,6 @@ config MIPS select HAVE_ARCH_TRACEHOOK select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES select HAVE_ASM_MODVERSIONS - select HAVE_CBPF_JIT if !64BIT && !CPU_MICROMIPS select HAVE_CONTEXT_TRACKING select HAVE_TIF_NOHZ select HAVE_C_RECORDMCOUNT @@ -65,7 +63,10 @@ config MIPS select HAVE_DEBUG_STACKOVERFLOW select HAVE_DMA_CONTIGUOUS select HAVE_DYNAMIC_FTRACE - select HAVE_EBPF_JIT if 64BIT && !CPU_MICROMIPS && TARGET_ISA_REV >= 2 + select HAVE_EBPF_JIT if !CPU_MICROMIPS && \ + !CPU_DADDI_WORKAROUNDS && \ + !CPU_R4000_WORKAROUNDS && \ + !CPU_R4400_WORKAROUNDS select HAVE_EXIT_THREAD select HAVE_FAST_GUP select HAVE_FTRACE_MCOUNT_RECORD @@ -994,60 +995,6 @@ config CAVIUM_OCTEON_SOC Hikari Say Y here for most Octeon reference boards. -config NLM_XLR_BOARD - bool "Netlogic XLR/XLS based systems" - select BOOT_ELF32 - select NLM_COMMON - select SYS_HAS_CPU_XLR - select SYS_SUPPORTS_SMP - select HAVE_PCI - select SWAP_IO_SPACE - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select PHYS_ADDR_T_64BIT - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_HIGHMEM - select NR_CPUS_DEFAULT_32 - select CEVT_R4K - select CSRC_R4K - select IRQ_MIPS_CPU - select ZONE_DMA32 if 64BIT - select SYNC_R4K - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_ZBOOT - select SYS_SUPPORTS_ZBOOT_UART16550 - help - Support for systems based on Netlogic XLR and XLS processors. - Say Y here if you have a XLR or XLS based board. - -config NLM_XLP_BOARD - bool "Netlogic XLP based systems" - select BOOT_ELF32 - select NLM_COMMON - select SYS_HAS_CPU_XLP - select SYS_SUPPORTS_SMP - select HAVE_PCI - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select PHYS_ADDR_T_64BIT - select GPIOLIB - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_HIGHMEM - select NR_CPUS_DEFAULT_32 - select CEVT_R4K - select CSRC_R4K - select IRQ_MIPS_CPU - select ZONE_DMA32 if 64BIT - select SYNC_R4K - select SYS_HAS_EARLY_PRINTK - select USE_OF - select SYS_SUPPORTS_ZBOOT - select SYS_SUPPORTS_ZBOOT_UART16550 - help - This board is based on Netlogic XLP Processor. - Say Y here if you have a XLP based board. - endchoice source "arch/mips/alchemy/Kconfig" @@ -1070,7 +1017,6 @@ source "arch/mips/cavium-octeon/Kconfig" source "arch/mips/loongson2ef/Kconfig" source "arch/mips/loongson32/Kconfig" source "arch/mips/loongson64/Kconfig" -source "arch/mips/netlogic/Kconfig" endmenu @@ -1212,15 +1158,6 @@ config SYS_SUPPORTS_RELOCATABLE The platform must provide plat_get_fdt() if it selects CONFIG_USE_OF to allow access to command line and entropy sources. -config MIPS_CBPF_JIT - def_bool y - depends on BPF_JIT && HAVE_CBPF_JIT - -config MIPS_EBPF_JIT - def_bool y - depends on BPF_JIT && HAVE_EBPF_JIT - - # # Endianness selection. Sufficiently obscure so many users don't know what to # answer,so we try hard to limit the available choices. Also the use of a @@ -1379,6 +1316,7 @@ config CPU_LOONGSON64 select MIPS_ASID_BITS_VARIABLE select MIPS_PGD_C0_CONTEXT select MIPS_L1_CACHE_SHIFT_6 + select MIPS_FP_SUPPORT select GPIOLIB select SWIOTLB select HAVE_KVM @@ -1782,35 +1720,10 @@ config CPU_BMIPS select CPU_HAS_PREFETCH select CPU_SUPPORTS_CPUFREQ select MIPS_EXTERNAL_TIMER + select GENERIC_IRQ_MIGRATION if HOTPLUG_CPU help Support for BMIPS32/3300/4350/4380 and BMIPS5000 processors. -config CPU_XLR - bool "Netlogic XLR SoC" - depends on SYS_HAS_CPU_XLR - select CPU_SUPPORTS_32BIT_KERNEL - select CPU_SUPPORTS_64BIT_KERNEL - select CPU_SUPPORTS_HIGHMEM - select CPU_SUPPORTS_HUGEPAGES - select WEAK_ORDERING - select WEAK_REORDERING_BEYOND_LLSC - help - Netlogic Microsystems XLR/XLS processors. - -config CPU_XLP - bool "Netlogic XLP SoC" - depends on SYS_HAS_CPU_XLP - select CPU_SUPPORTS_32BIT_KERNEL - select CPU_SUPPORTS_64BIT_KERNEL - select CPU_SUPPORTS_HIGHMEM - select WEAK_ORDERING - select WEAK_REORDERING_BEYOND_LLSC - select CPU_HAS_PREFETCH - select CPU_MIPSR2 - select CPU_SUPPORTS_HUGEPAGES - select MIPS_ASID_BITS_VARIABLE - help - Netlogic Microsystems XLP processors. endchoice config CPU_MIPS32_3_5_FEATURES @@ -2057,12 +1970,6 @@ config SYS_HAS_CPU_BMIPS5000 select SYS_HAS_CPU_BMIPS select ARCH_HAS_SYNC_DMA_FOR_CPU -config SYS_HAS_CPU_XLR - bool - -config SYS_HAS_CPU_XLP - bool - # # CPU may reorder R->R, R->W, W->R, W->W # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC @@ -2157,7 +2064,7 @@ config CPU_SUPPORTS_HUGEPAGES config MIPS_PGD_C0_CONTEXT bool depends on 64BIT - default y if (CPU_MIPSR2 || CPU_MIPSR6) && !CPU_XLP + default y if (CPU_MIPSR2 || CPU_MIPSR6) # # Set to y for ptrace access to watch registers. @@ -2840,7 +2747,7 @@ config NODES_SHIFT config HW_PERF_EVENTS bool "Enable hardware performance counter support for perf events" - depends on PERF_EVENTS && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON64) + depends on PERF_EVENTS && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_LOONGSON64) default y help Enable hardware performance counter support for perf events. If @@ -3316,8 +3223,6 @@ source "drivers/cpuidle/Kconfig" endmenu -source "drivers/firmware/Kconfig" - source "arch/mips/kvm/Kconfig" source "arch/mips/vdso/Kconfig" |