diff options
Diffstat (limited to 'arch/blackfin/mach-bf533/boards/ip0x.c')
| -rw-r--r-- | arch/blackfin/mach-bf533/boards/ip0x.c | 319 |
1 files changed, 0 insertions, 319 deletions
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c deleted file mode 100644 index 39c8e8547b82..000000000000 --- a/arch/blackfin/mach-bf533/boards/ip0x.c +++ /dev/null @@ -1,319 +0,0 @@ -/* - * Copyright 2004-2009 Analog Devices Inc. - * 2007 David Rowe - * 2006 Intratrade Ltd. - * Ivan Danov <idanov@gmail.com> - * 2005 National ICT Australia (NICTA) - * Aidan Williams <aidan@nicta.com.au> - * - * Licensed under the GPL-2 or later. - */ - -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) -#include <linux/usb/isp1362.h> -#endif -#include <asm/irq.h> -#include <asm/dma.h> -#include <asm/bfin5xx_spi.h> -#include <asm/portmux.h> - -/* - * Name the Board for the /proc/cpuinfo - */ -const char bfin_board_name[] = "IP04/IP08"; - -/* - * Driver needs to know address, irq and flag pin. - */ -#if defined(CONFIG_BFIN532_IP0X) -#if IS_ENABLED(CONFIG_DM9000) - -#include <linux/dm9000.h> - -static struct resource dm9000_resource1[] = { - { - .start = 0x20100000, - .end = 0x20100000 + 1, - .flags = IORESOURCE_MEM - },{ - .start = 0x20100000 + 2, - .end = 0x20100000 + 3, - .flags = IORESOURCE_MEM - },{ - .start = IRQ_PF15, - .end = IRQ_PF15, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE - } -}; - -static struct resource dm9000_resource2[] = { - { - .start = 0x20200000, - .end = 0x20200000 + 1, - .flags = IORESOURCE_MEM - },{ - .start = 0x20200000 + 2, - .end = 0x20200000 + 3, - .flags = IORESOURCE_MEM - },{ - .start = IRQ_PF14, - .end = IRQ_PF14, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE - } -}; - -/* -* for the moment we limit ourselves to 16bit IO until some -* better IO routines can be written and tested -*/ -static struct dm9000_plat_data dm9000_platdata1 = { - .flags = DM9000_PLATF_16BITONLY, -}; - -static struct platform_device dm9000_device1 = { - .name = "dm9000", - .id = 0, - .num_resources = ARRAY_SIZE(dm9000_resource1), - .resource = dm9000_resource1, - .dev = { - .platform_data = &dm9000_platdata1, - } -}; - -static struct dm9000_plat_data dm9000_platdata2 = { - .flags = DM9000_PLATF_16BITONLY, -}; - -static struct platform_device dm9000_device2 = { - .name = "dm9000", - .id = 1, - .num_resources = ARRAY_SIZE(dm9000_resource2), - .resource = dm9000_resource2, - .dev = { - .platform_data = &dm9000_platdata2, - } -}; - -#endif -#endif - - -#if IS_ENABLED(CONFIG_SPI_BFIN5XX) -/* all SPI peripherals info goes here */ - -#if IS_ENABLED(CONFIG_MMC_SPI) -static struct bfin5xx_spi_chip mmc_spi_chip_info = { - .enable_dma = 0, /* if 1 - block!!! */ -}; -#endif - -/* Notice: for blackfin, the speed_hz is the value of register - * SPI_BAUD, not the real baudrate */ -static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if IS_ENABLED(CONFIG_MMC_SPI) - { - .modalias = "mmc_spi", - .max_speed_hz = 2, - .bus_num = 1, - .chip_select = 5, - .controller_data = &mmc_spi_chip_info, - }, -#endif -}; - -/* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { - .num_chipselect = 8, - .enable_dma = 1, /* master has the ability to do dma transfer */ -}; - -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ - .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ - }, -}; -#endif /* spi master and devices */ - -#if IS_ENABLED(CONFIG_SERIAL_BFIN) -#ifdef CONFIG_SERIAL_BFIN_UART0 -static struct resource bfin_uart0_resources[] = { - { - .start = BFIN_UART_THR, - .end = BFIN_UART_GCTL+2, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART0_TX, - .end = IRQ_UART0_TX, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_UART0_ERROR, - .end = IRQ_UART0_ERROR, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART0_TX, - .end = CH_UART0_TX, - .flags = IORESOURCE_DMA, - }, - { - .start = CH_UART0_RX, - .end = CH_UART0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static unsigned short bfin_uart0_peripherals[] = { - P_UART0_TX, P_UART0_RX, 0 -}; - -static struct platform_device bfin_uart0_device = { - .name = "bfin-uart", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_uart0_resources), - .resource = bfin_uart0_resources, - .dev = { - .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ - }, -}; -#endif -#endif - -#if IS_ENABLED(CONFIG_BFIN_SIR) -#ifdef CONFIG_BFIN_SIR0 -static struct resource bfin_sir0_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART0_RX, - .end = CH_UART0_RX+1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device bfin_sir0_device = { - .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir0_resources), - .resource = bfin_sir0_resources, -}; -#endif -#endif - -#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) -static struct resource isp1362_hcd_resources[] = { - { - .start = 0x20300000, - .end = 0x20300000 + 1, - .flags = IORESOURCE_MEM, - },{ - .start = 0x20300000 + 2, - .end = 0x20300000 + 3, - .flags = IORESOURCE_MEM, - },{ - .start = IRQ_PF11, - .end = IRQ_PF11, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct isp1362_platform_data isp1362_priv = { - .sel15Kres = 1, - .clknotstop = 0, - .oc_enable = 0, /* external OC */ - .int_act_high = 0, - .int_edge_triggered = 0, - .remote_wakeup_connected = 0, - .no_power_switching = 1, - .power_switching_mode = 0, -}; - -static struct platform_device isp1362_hcd_device = { - .name = "isp1362-hcd", - .id = 0, - .dev = { - .platform_data = &isp1362_priv, - }, - .num_resources = ARRAY_SIZE(isp1362_hcd_resources), - .resource = isp1362_hcd_resources, -}; -#endif - - -static struct platform_device *ip0x_devices[] __initdata = { -#if defined(CONFIG_BFIN532_IP0X) -#if IS_ENABLED(CONFIG_DM9000) - &dm9000_device1, - &dm9000_device2, -#endif -#endif - -#if IS_ENABLED(CONFIG_SPI_BFIN5XX) - &spi_bfin_master_device, -#endif - -#if IS_ENABLED(CONFIG_SERIAL_BFIN) -#ifdef CONFIG_SERIAL_BFIN_UART0 - &bfin_uart0_device, -#endif -#endif - -#if IS_ENABLED(CONFIG_BFIN_SIR) -#ifdef CONFIG_BFIN_SIR0 - &bfin_sir0_device, -#endif -#endif - -#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) - &isp1362_hcd_device, -#endif -}; - -static int __init ip0x_init(void) -{ - printk(KERN_INFO "%s(): registering device resources\n", __func__); - platform_add_devices(ip0x_devices, ARRAY_SIZE(ip0x_devices)); - - spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - - return 0; -} - -arch_initcall(ip0x_init); - -static struct platform_device *ip0x_early_devices[] __initdata = { -#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) -#ifdef CONFIG_SERIAL_BFIN_UART0 - &bfin_uart0_device, -#endif -#endif -}; - -void __init native_machine_early_platform_add_devices(void) -{ - printk(KERN_INFO "register early platform devices\n"); - early_platform_add_devices(ip0x_early_devices, - ARRAY_SIZE(ip0x_early_devices)); -} |