diff options
Diffstat (limited to 'arch/arm')
297 files changed, 4333 insertions, 10953 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b5d529fdffab..5fab553fd03a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -703,6 +703,7 @@ config ARCH_VIRT select ARM_GIC select ARM_GIC_V2M if PCI select ARM_GIC_V3 + select ARM_GIC_V3_ITS if PCI select ARM_PSCI select HAVE_ARM_ARCH_TIMER @@ -887,6 +888,11 @@ config MACH_STM32F429 depends on ARCH_STM32 default y +config MACH_STM32F746 + bool "STMicrolectronics STM32F746" + depends on ARCH_STM32 + default y + config ARCH_MPS2 bool "ARM MPS2 platform" depends on ARM_SINGLE_ARMV7M diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 6be9ee148b78..68312a9f660a 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -191,6 +191,7 @@ machine-$(CONFIG_ARCH_MXS) += mxs machine-$(CONFIG_ARCH_NETX) += netx machine-$(CONFIG_ARCH_NOMADIK) += nomadik machine-$(CONFIG_ARCH_NSPIRE) += nspire +machine-$(CONFIG_ARCH_OXNAS) += oxnas machine-$(CONFIG_ARCH_OMAP1) += omap1 machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 machine-$(CONFIG_ARCH_ORION5X) += orion5x diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index befcd2619902..c558ba75cbcc 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -745,7 +745,6 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-pcduino2.dtb \ sun4i-a10-pov-protab2-ips9.dtb dtb-$(CONFIG_MACH_SUN5I) += \ - ntc-gr8-evb.dtb \ sun5i-a10s-auxtek-t003.dtb \ sun5i-a10s-auxtek-t004.dtb \ sun5i-a10s-mk802.dtb \ @@ -761,6 +760,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a13-olinuxino-micro.dtb \ sun5i-a13-q8-tablet.dtb \ sun5i-a13-utoo-p66.dtb \ + sun5i-gr8-evb.dtb \ sun5i-r8-chip.dtb dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-app4-evb1.dtb \ diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts index 064b322a7a04..3b23b32e1b30 100644 --- a/arch/arm/boot/dts/dra72-evm-revc.dts +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -59,15 +59,17 @@ &davinci_mdio { dp83867_0: ethernet-phy@2 { reg = <2>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_NS>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,min-output-impedance; }; dp83867_1: ethernet-phy@3 { reg = <3>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_NS>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,min-output-imepdance; }; }; diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index fdcc23d203e5..0da76c5ff6d7 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -436,18 +436,20 @@ }; gmac0: ethernet@1840000 { - compatible = "hisilicon,hix5hd2-gmac"; + compatible = "hisilicon,hix5hd2-gemac", "hisilicon,hisi-gemac-v1"; reg = <0x1840000 0x1000>,<0x184300c 0x4>; interrupts = <0 71 4>; clocks = <&clock HIX5HD2_MAC0_CLK>; + clock-names = "mac_core"; status = "disabled"; }; gmac1: ethernet@1841000 { - compatible = "hisilicon,hix5hd2-gmac"; + compatible = "hisilicon,hix5hd2-gemac", "hisilicon,hisi-gemac-v1"; reg = <0x1841000 0x1000>,<0x1843010 0x4>; interrupts = <0 72 4>; clocks = <&clock HIX5HD2_MAC1_CLK>; + clock-names = "mac_core"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 1ce7ae94e7ad..8d4c0e3533fa 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -118,13 +118,6 @@ interrupts = <19>; clocks = <&clks 25>; }; - - clks: ccm@53f80000{ - compatible = "fsl,imx31-ccm"; - reg = <0x53f80000 0x4000>; - interrupts = <0 31 0x04 0 53 0x04>; - #clock-cells = <1>; - }; }; aips@53f00000 { /* AIPS2 */ @@ -134,6 +127,13 @@ reg = <0x53f00000 0x100000>; ranges; + clks: ccm@53f80000{ + compatible = "fsl,imx31-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>, <53>; + #clock-cells = <1>; + }; + gpt: timer@53f90000 { compatible = "fsl,imx31-gpt"; reg = <0x53f90000 0x4000>; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index dec4b073ceb1..379939699164 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -64,8 +64,8 @@ }; ldo3_reg: ldo3 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; @@ -76,8 +76,8 @@ }; ldo5_reg: ldo5 { - regulator-min-microvolt = <1725000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; regulator-always-on; }; @@ -100,14 +100,14 @@ }; ldo9_reg: ldo9 { - regulator-min-microvolt = <1200000>; + regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3600000>; regulator-always-on; }; ldo10_reg: ldo10 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <3650000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; regulator-always-on; }; }; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index 59bc5a4dce17..a150bca84daa 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -183,7 +183,6 @@ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 >; }; diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi index 886dbf2eca49..caaa04036c8a 100644 --- a/arch/arm/boot/dts/imx6qp.dtsi +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -87,3 +87,13 @@ }; }; }; + +&ldb { + clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>, + <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>; + clock-names = "di0_pll", "di1_pll", + "di0_sel", "di1_sel", "di2_sel", "di3_sel", + "di0", "di1"; +}; diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h index 3f9f0d9c8094..7bc3c00e56c6 100644 --- a/arch/arm/boot/dts/imx7d-pinfunc.h +++ b/arch/arm/boot/dts/imx7d-pinfunc.h @@ -43,26 +43,30 @@ #define MX7D_PAD_GPIO1_IO04__GPIO1_IO4 0x0010 0x0040 0x0000 0x0 0x0 #define MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x0010 0x0040 0x072C 0x1 0x1 #define MX7D_PAD_GPIO1_IO04__FLEXTIMER1_CH4 0x0010 0x0040 0x0594 0x2 0x1 -#define MX7D_PAD_GPIO1_IO04__UART5_CTS_B 0x0010 0x0040 0x0710 0x3 0x4 +#define MX7D_PAD_GPIO1_IO04__UART5_DCE_CTS 0x0010 0x0040 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO04__UART5_DTE_RTS 0x0010 0x0040 0x0710 0x3 0x4 #define MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x0010 0x0040 0x05D4 0x4 0x2 #define MX7D_PAD_GPIO1_IO04__OBSERVE3_OUT 0x0010 0x0040 0x0000 0x6 0x0 #define MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x0014 0x0044 0x0000 0x0 0x0 #define MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR 0x0014 0x0044 0x0000 0x1 0x0 #define MX7D_PAD_GPIO1_IO05__FLEXTIMER1_CH5 0x0014 0x0044 0x0598 0x2 0x1 -#define MX7D_PAD_GPIO1_IO05__UART5_RTS_B 0x0014 0x0044 0x0710 0x3 0x5 +#define MX7D_PAD_GPIO1_IO05__UART5_DCE_RTS 0x0014 0x0044 0x0710 0x3 0x5 +#define MX7D_PAD_GPIO1_IO05__UART5_DTE_CTS 0x0014 0x0044 0x0000 0x3 0x0 #define MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x0014 0x0044 0x05D8 0x4 0x2 #define MX7D_PAD_GPIO1_IO05__OBSERVE4_OUT 0x0014 0x0044 0x0000 0x6 0x0 #define MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x0018 0x0048 0x0000 0x0 0x0 #define MX7D_PAD_GPIO1_IO06__USB_OTG2_OC 0x0018 0x0048 0x0728 0x1 0x1 #define MX7D_PAD_GPIO1_IO06__FLEXTIMER1_CH6 0x0018 0x0048 0x059C 0x2 0x1 -#define MX7D_PAD_GPIO1_IO06__UART5_RX_DATA 0x0018 0x0048 0x0714 0x3 0x4 +#define MX7D_PAD_GPIO1_IO06__UART5_DCE_RX 0x0018 0x0048 0x0714 0x3 0x4 +#define MX7D_PAD_GPIO1_IO06__UART5_DTE_TX 0x0018 0x0048 0x0000 0x3 0x0 #define MX7D_PAD_GPIO1_IO06__I2C2_SCL 0x0018 0x0048 0x05DC 0x4 0x2 #define MX7D_PAD_GPIO1_IO06__CCM_WAIT 0x0018 0x0048 0x0000 0x5 0x0 #define MX7D_PAD_GPIO1_IO06__KPP_ROW4 0x0018 0x0048 0x0624 0x6 0x1 #define MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x001C 0x004C 0x0000 0x0 0x0 #define MX7D_PAD_GPIO1_IO07__USB_OTG2_PWR 0x001C 0x004C 0x0000 0x1 0x0 #define MX7D_PAD_GPIO1_IO07__FLEXTIMER1_CH7 0x001C 0x004C 0x05A0 0x2 0x1 -#define MX7D_PAD_GPIO1_IO07__UART5_TX_DATA 0x001C 0x004C 0x0714 0x3 0x5 +#define MX7D_PAD_GPIO1_IO07__UART5_DCE_TX 0x001C 0x004C 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO07__UART5_DTE_RX 0x001C 0x004C 0x0714 0x3 0x5 #define MX7D_PAD_GPIO1_IO07__I2C2_SDA 0x001C 0x004C 0x05E0 0x4 0x2 #define MX7D_PAD_GPIO1_IO07__CCM_STOP 0x001C 0x004C 0x0000 0x5 0x0 #define MX7D_PAD_GPIO1_IO07__KPP_COL4 0x001C 0x004C 0x0604 0x6 0x1 diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 0d7d5ac6257b..2b6cb05bc01a 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -643,9 +643,8 @@ reg = <0x30730000 0x10000>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>, - <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>; - clock-names = "pix", "axi", "disp_axi"; + <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>; + clock-names = "pix", "axi"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 0ff1c2de95bf..26cce4d18405 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -13,6 +13,11 @@ }; }; + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0>; + }; + wl12xx_vmmc: wl12xx_vmmc { compatible = "regulator-fixed"; regulator-name = "vwl1271"; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 731ec37aed5b..8f9a69ca818c 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -13,9 +13,9 @@ }; }; - memory@0 { + memory@80000000 { device_type = "memory"; - reg = <0 0>; + reg = <0x80000000 0>; }; leds { diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 6365635fea5c..4caadb253249 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -124,6 +124,7 @@ compatible = "ti,abe-twl6040"; ti,model = "omap5-uevm"; + ti,jack-detection; ti,mclk-freq = <19200000>; ti,mcpdm = <&mcpdm>; @@ -415,7 +416,7 @@ ti,backup-battery-charge-high-current; }; - gpadc { + gpadc: gpadc { compatible = "ti,palmas-gpadc"; interrupts = <18 0 16 0 @@ -475,8 +476,8 @@ smps6_reg: smps6 { /* VDD_DDR3 - over VDD_SMPS6 */ regulator-name = "smps6"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; }; diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts index 1cf644bfd7ea..51dc734cd5b9 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts @@ -82,6 +82,10 @@ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; +&sata { + nr-ports = <2>; +}; + &ehci1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index e571d66ea0fe..3d0a18abd408 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -626,4 +626,9 @@ "sru-src6", "sru-src7", "sru-src8"; }; }; + + rst: reset-controller@ffcc0000 { + compatible = "renesas,r8a7778-reset-wdt"; + reg = <0xffcc0000 0x40>; + }; }; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index b9bbcce69dfb..8cf16008a09b 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -590,6 +590,11 @@ }; }; + rst: reset-controller@ffcc0000 { + compatible = "renesas,r8a7779-reset-wdt"; + reg = <0xffcc0000 0x48>; + }; + sysc: system-controller@ffd85000 { compatible = "renesas,r8a7779-sysc"; reg = <0xffd85000 0x0200>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 351fcc2f87df..3f10b0bf1b08 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1471,6 +1471,11 @@ }; }; + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7790-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,r8a7790-sysc"; reg = <0 0xe6180000 0 0x0200>; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 162b55c665a3..c465c79bcca6 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1482,6 +1482,11 @@ }; }; + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7791-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,r8a7791-sysc"; reg = <0 0xe6180000 0 0x0200>; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 713141d38b3e..6e1f61f65d29 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -118,6 +118,11 @@ IRQ_TYPE_LEVEL_LOW)>; }; + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7792-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,r8a7792-sysc"; reg = <0 0xe6180000 0 0x0200>; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 8d02aacf2892..e4b385eccf74 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -1279,6 +1279,11 @@ }; }; + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7793-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,r8a7793-sysc"; reg = <0 0xe6180000 0 0x0200>; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 9365580a194f..69e4f4fad89b 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -1375,6 +1375,11 @@ }; }; + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7794-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,r8a7794-sysc"; reg = <0 0xe6180000 0 0x0200>; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index a935523a1eb8..7c2dc19925a1 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -204,7 +204,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <275>; g-tx-fifo-size = <256 128 128 64 64 32>; - g-use-dma; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 17ec2e2d7a60..74a749c566ee 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -596,7 +596,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <275>; g-tx-fifo-size = <256 128 128 64 64 32>; - g-use-dma; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index e15beb3c671e..8fbd3c806fa0 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -181,7 +181,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <275>; g-tx-fifo-size = <256 128 128 64 64 32>; - g-use-dma; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 449acf0d8272..17ea0abcdbd7 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -118,6 +118,7 @@ block_size = <0xfff>; dma-masters = <2>; data-width = <8 8>; + multi-block = <1 1 1 1 1 1 1 1>; }; dma@eb000000 { @@ -134,6 +135,7 @@ chan_priority = <1>; block_size = <0xfff>; data-width = <8 8>; + multi-block = <1 1 1 1 1 1 1 1>; }; fsmc: flash@b0000000 { diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index b3df1c60d465..386eee6de232 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -239,14 +239,25 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; + cap-sd-highspeed; cap-mmc-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + /* All direction control is used */ + st,sig-dir-cmd; + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-dir-dat31; + st,sig-pin-fbclk; + full-pwr-cycle; vmmc-supply = <&ab8500_ldo_aux3_reg>; vqmmc-supply = <&vmmci>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdi0_default_mode>; pinctrl-1 = <&sdi0_sleep_mode>; - cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>; // 218 + /* GPIO218 MMC_CD */ + cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -549,7 +560,7 @@ /* VMMCI level-shifter enable */ snowball_cfg3 { pins = "GPIO217_AH12"; - ste,config = <&gpio_out_lo>; + ste,config = <&gpio_out_hi>; }; /* VMMCI level-shifter voltage select */ snowball_cfg4 { diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 91096a49efa9..8f79b4147bba 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -283,6 +283,8 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -296,6 +298,8 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -309,6 +313,8 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -322,6 +328,8 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -335,6 +343,8 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -348,6 +358,8 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c5_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -363,6 +375,8 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c10_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -376,6 +390,8 @@ clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c11_default>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts index ef2ff2f518f6..7fb507fcba7e 100644 --- a/arch/arm/boot/dts/stih410-b2260.dts +++ b/arch/arm/boot/dts/stih410-b2260.dts @@ -74,7 +74,7 @@ /* Low speed expansion connector */ spi0: spi@9844000 { label = "LS-SPI0"; - cs-gpio = <&pio30 3 0>; + cs-gpios = <&pio30 3 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/ntc-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts index 4b622f3b5220..714381fd64d7 100644 --- a/arch/arm/boot/dts/ntc-gr8-evb.dts +++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts @@ -44,7 +44,7 @@ */ /dts-v1/; -#include "ntc-gr8.dtsi" +#include "sun5i-gr8.dtsi" #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/ntc-gr8.dtsi b/arch/arm/boot/dts/sun5i-gr8.dtsi index ca54e03ef366..ca54e03ef366 100644 --- a/arch/arm/boot/dts/ntc-gr8.dtsi +++ b/arch/arm/boot/dts/sun5i-gr8.dtsi diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 48fc24f36fcb..300a1bd5a6ec 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -282,11 +282,15 @@ uart1_pins_a: uart1@0 { allwinner,pins = "PG6", "PG7"; allwinner,function = "uart1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart1_pins_cts_rts_a: uart1-cts-rts@0 { allwinner,pins = "PG8", "PG9"; allwinner,function = "uart1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_pins_a: mmc0@0 { diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 75a865406d3e..f4ba088b225e 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -410,7 +410,7 @@ }; uart3_pins: uart3 { - allwinner,pins = "PG13", "PG14"; + allwinner,pins = "PA13", "PA14"; allwinner,function = "uart3"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index 2c49c3614bda..5357ea9c14b1 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -184,11 +184,11 @@ }; &mio_clk { - compatible = "socionext,uniphier-pro5-mio-clock"; + compatible = "socionext,uniphier-pro5-sd-clock"; }; &mio_rst { - compatible = "socionext,uniphier-pro5-mio-reset"; + compatible = "socionext,uniphier-pro5-sd-reset"; }; &peri_clk { diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 8789cd518933..950f07ba0337 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -197,11 +197,11 @@ }; &mio_clk { - compatible = "socionext,uniphier-pxs2-mio-clock"; + compatible = "socionext,uniphier-pxs2-sd-clock"; }; &mio_rst { - compatible = "socionext,uniphier-pxs2-mio-reset"; + compatible = "socionext,uniphier-pxs2-sd-reset"; }; &peri_clk { diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi index a3824e61bd72..d7fdb2a7d97b 100644 --- a/arch/arm/boot/dts/vf500.dtsi +++ b/arch/arm/boot/dts/vf500.dtsi @@ -70,7 +70,7 @@ global_timer: timer@40002200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x40002200 0x20>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&intc>; clocks = <&clks VF610_CLK_PLATFORM_BUS>; }; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 5c1fcab4a6f7..1552db00cc59 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -88,10 +88,16 @@ switch0: switch0@0 { compatible = "marvell,mv88e6085"; + pinctrl-0 = <&pinctrl_gpio_switch0>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; reg = <0>; dsa,member = <0 0>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; ports { #address-cells = <1>; @@ -99,16 +105,19 @@ port@0 { reg = <0>; label = "lan0"; + phy-handle = <&switch0phy0>; }; port@1 { reg = <1>; label = "lan1"; + phy-handle = <&switch0phy1>; }; port@2 { reg = <2>; label = "lan2"; + phy-handle = <&switch0phy2>; }; switch0port5: port@5 { @@ -133,6 +142,24 @@ }; }; }; + mdio { + #address-cells = <1>; + #size-cells = <0>; + switch0phy0: switch0phy0@0 { + reg = <0>; + interrupt-parent = <&switch0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + switch0phy1: switch1phy0@1 { + reg = <1>; + interrupt-parent = <&switch0>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; + switch0phy2: switch1phy0@2 { + reg = <2>; + interrupt-parent = <&switch0>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + }; + }; }; }; @@ -143,10 +170,16 @@ switch1: switch1@0 { compatible = "marvell,mv88e6085"; + pinctrl-0 = <&pinctrl_gpio_switch1>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; reg = <0>; dsa,member = <0 1>; + interrupt-parent = <&gpio0>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; ports { #address-cells = <1>; @@ -196,12 +229,18 @@ #size-cells = <0>; switch1phy0: switch1phy0@0 { reg = <0>; + interrupt-parent = <&switch1>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; }; switch1phy1: switch1phy0@1 { reg = <1>; + interrupt-parent = <&switch1>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; switch1phy2: switch1phy0@2 { reg = <2>; + interrupt-parent = <&switch1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; }; }; }; @@ -636,6 +675,18 @@ >; }; + pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + fsl,pins = < + VF610_PAD_PTB5__GPIO_27 0x219d + >; + }; + + pinctrl_gpio_switch1: pinctrl-gpio-switch1 { + fsl,pins = < + VF610_PAD_PTB4__GPIO_26 0x219d + >; + }; + pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset { fsl,pins = < VF610_PAD_PTE14__GPIO_119 0x31c2 diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c index 37dc0fe1093f..46730017b3c5 100644 --- a/arch/arm/common/bL_switcher.c +++ b/arch/arm/common/bL_switcher.c @@ -757,19 +757,18 @@ EXPORT_SYMBOL_GPL(bL_switcher_put_enabled); * while the switcher is active. * We're just not ready to deal with that given the trickery involved. */ -static int bL_switcher_hotplug_callback(struct notifier_block *nfb, - unsigned long action, void *hcpu) +static int bL_switcher_cpu_pre(unsigned int cpu) { - if (bL_switcher_active) { - int pairing = bL_switcher_cpu_pairing[(unsigned long)hcpu]; - switch (action & 0xf) { - case CPU_UP_PREPARE: - case CPU_DOWN_PREPARE: - if (pairing == -1) - return NOTIFY_BAD; - } - } - return NOTIFY_DONE; + int pairing; + + if (!bL_switcher_active) + return 0; + + pairing = bL_switcher_cpu_pairing[cpu]; + + if (pairing == -1) + return -EINVAL; + return 0; } static bool no_bL_switcher; @@ -782,8 +781,15 @@ static int __init bL_switcher_init(void) if (!mcpm_is_available()) return -ENODEV; - cpu_notifier(bL_switcher_hotplug_callback, 0); - + cpuhp_setup_state_nocalls(CPUHP_ARM_BL_PREPARE, "arm/bl:prepare", + bL_switcher_cpu_pre, NULL); + ret = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "arm/bl:predown", + NULL, bL_switcher_cpu_pre); + if (ret < 0) { + cpuhp_remove_state_nocalls(CPUHP_ARM_BL_PREPARE); + pr_err("bL_switcher: Failed to allocate a hotplug state\n"); + return ret; + } if (!no_bL_switcher) { ret = bL_switcher_enable(); if (ret) diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 301281645d08..75055df1cda3 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -243,7 +243,8 @@ static int needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) } static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction dir) + enum dma_data_direction dir, + unsigned long attrs) { struct dmabounce_device_info *device_info = dev->archdata.dmabounce; struct safe_buffer *buf; @@ -262,7 +263,8 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size, __func__, buf->ptr, virt_to_dma(dev, buf->ptr), buf->safe, buf->safe_dma_addr); - if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) { + if ((dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) && + !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) { dev_dbg(dev, "%s: copy unsafe %p to safe %p, size %d\n", __func__, ptr, buf->safe, size); memcpy(buf->safe, ptr, size); @@ -272,7 +274,8 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size, } static inline void unmap_single(struct device *dev, struct safe_buffer *buf, - size_t size, enum dma_data_direction dir) + size_t size, enum dma_data_direction dir, + unsigned long attrs) { BUG_ON(buf->size != size); BUG_ON(buf->direction != dir); @@ -283,7 +286,8 @@ static inline void unmap_single(struct device *dev, struct safe_buffer *buf, DO_STATS(dev->archdata.dmabounce->bounce_count++); - if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) { + if ((dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) && + !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) { void *ptr = buf->ptr; dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n", @@ -334,7 +338,7 @@ static dma_addr_t dmabounce_map_page(struct device *dev, struct page *page, return DMA_ERROR_CODE; } - return map_single(dev, page_address(page) + offset, size, dir); + return map_single(dev, page_address(page) + offset, size, dir, attrs); } /* @@ -357,7 +361,7 @@ static void dmabounce_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t return; } - unmap_single(dev, buf, size, dir); + unmap_single(dev, buf, size, dir, attrs); } static int __dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr, diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig index f0dea52e49c4..113a5d815060 100644 --- a/arch/arm/configs/am200epdkit_defconfig +++ b/arch/arm/configs/am200epdkit_defconfig @@ -55,8 +55,9 @@ CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PXA2XX=y CONFIG_BLK_DEV_LOOP=m -CONFIG_IDE=m -CONFIG_BLK_DEV_IDECS=m +CONFIG_BLK_DEV_SD=m +CONFIG_ATA=m +CONFIG_PATA_PCMCIA=m CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_SMC91X=m diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig index 558ecd8f66ff..ab19ff1a0b71 100644 --- a/arch/arm/configs/assabet_defconfig +++ b/arch/arm/configs/assabet_defconfig @@ -34,7 +34,6 @@ CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_SA1100=y CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_RAM=y -CONFIG_IDE=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_NET_PCMCIA=y diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index d59009878312..2a604aa3195b 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -42,8 +42,6 @@ CONFIG_MTD_SA1100=y CONFIG_PARPORT=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m -CONFIG_IDE=m -CONFIG_BLK_DEV_IDECD=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index 79de828e49ad..4b89f4e6e849 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -73,6 +73,8 @@ CONFIG_SPI_BCM2835=y CONFIG_SPI_BCM2835AUX=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_BCM2835_THERMAL=y CONFIG_WATCHDOG=y CONFIG_BCM2835_WDT=y CONFIG_DRM=y diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig index dce912d146b4..57a2a18690b1 100644 --- a/arch/arm/configs/cerfcube_defconfig +++ b/arch/arm/configs/cerfcube_defconfig @@ -39,7 +39,6 @@ CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_SA1100=y CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_RAM=m -CONFIG_IDE=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_NET_PCI=y diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index 52dbad5619e2..a8f3c596c39c 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -43,8 +43,9 @@ CONFIG_MTD_SA1100=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=1024 -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECS=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_PCMCIA=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index c1470a00f55a..462533bd84c6 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -99,15 +99,14 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_SHARPSL=y CONFIG_BLK_DEV_LOOP=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECS=y -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m +CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y +CONFIG_ATA=y +CONFIG_PATA_PCMCIA=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_USB_CATC=m diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 5e5dd6bc5ed9..8806754f7175 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -7,13 +7,13 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CGROUPS=y +CONFIG_CHECKPOINT_RESTORE=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set @@ -34,6 +34,7 @@ CONFIG_DAVINCI_MUX_WARNINGS=y CONFIG_DAVINCI_RESET_CLOCKS=y CONFIG_PREEMPT=y CONFIG_AEABI=y +CONFIG_SECCOMP=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y @@ -52,10 +53,10 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_NETFILTER=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set +CONFIG_DA8XX_MSTPRI=y CONFIG_MTD=m CONFIG_MTD_BLOCK=m CONFIG_MTD_CFI=m @@ -116,6 +117,8 @@ CONFIG_SPI_DAVINCI=m CONFIG_PINCTRL_SINGLE=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PCA953X=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_GPIO=y CONFIG_WATCHDOG=y CONFIG_DAVINCI_WATCHDOG=m CONFIG_MFD_DM355EVM_MSP=y @@ -123,6 +126,8 @@ CONFIG_TPS6507X=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_TPS6507X=y +CONFIG_DRM=m +CONFIG_DRM_TILCDC=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DA8XX=y @@ -153,10 +158,13 @@ CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m CONFIG_USB=m CONFIG_USB_MON=m +CONFIG_USB_OHCI_HCD=m CONFIG_USB_STORAGE=m CONFIG_USB_MUSB_HDRC=m +CONFIG_USB_MUSB_DA8XX=m CONFIG_MUSB_PIO_ONLY=y CONFIG_USB_TEST=m +CONFIG_NOP_USB_XCEIV=m CONFIG_USB_GADGET=m CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_DEBUG_FS=y @@ -167,28 +175,32 @@ CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_USB_CDC_COMPOSITE=m -CONFIG_MMC=m +CONFIG_MMC=y # CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_MMC_DAVINCI=m +CONFIG_MMC_DAVINCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m CONFIG_LEDS_GPIO=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_OMAP=m CONFIG_DMADEVICES=y CONFIG_TI_EDMA=y CONFIG_MEMORY=y CONFIG_TI_AEMIF=m +CONFIG_DA8XX_DDRCTL=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_TMPFS_XATTR=y CONFIG_JFFS2_FS=m CONFIG_UBIFS_FS=m CONFIG_CRAMFS=y diff --git a/arch/arm/configs/dram_0xc0000000.config b/arch/arm/configs/dram_0xc0000000.config new file mode 100644 index 000000000000..343d5333d973 --- /dev/null +++ b/arch/arm/configs/dram_0xc0000000.config @@ -0,0 +1 @@ +CONFIG_DRAM_BASE=0xc0000000 diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index c58f6841f8aa..79c415c33f69 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -155,6 +155,7 @@ CONFIG_VIDEO_EXYNOS4_FIMC_IS=m CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m CONFIG_VIDEO_SAMSUNG_S5P_MFC=m +CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m CONFIG_V4L_TEST_DRIVERS=y CONFIG_DRM=y CONFIG_DRM_EXYNOS=y diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig index 0142ec37e0be..ebeca11faa48 100644 --- a/arch/arm/configs/h3600_defconfig +++ b/arch/arm/configs/h3600_defconfig @@ -39,8 +39,9 @@ CONFIG_MTD_SA1100=y CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECS=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_PCMCIA=y CONFIG_NETDEVICES=y CONFIG_PCMCIA_PCNET=y CONFIG_PPP=m diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 8ec4dbbb50b0..cbe7faf55245 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -86,6 +86,7 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=64 CONFIG_IMX_WEIM=y CONFIG_CONNECTOR=y CONFIG_MTD=y @@ -256,6 +257,7 @@ CONFIG_SND_IMX_SOC=y CONFIG_SND_SOC_PHYCORE_AC97=y CONFIG_SND_SOC_EUKREA_TLV320=y CONFIG_SND_SOC_IMX_WM8962=y +CONFIG_SND_SOC_IMX_ES8328=y CONFIG_SND_SOC_IMX_SGTL5000=y CONFIG_SND_SOC_IMX_SPDIF=y CONFIG_SND_SOC_IMX_MC13783=y diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index 869faae67201..69cb8f1efcea 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -26,6 +26,7 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPUFREQ_DT=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index cf4918a2c51f..bb910d9df6c1 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -127,16 +127,17 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_EEPROM_LEGACY=y -CONFIG_IDE=y -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_PDC202XX_NEW=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=y CONFIG_SATA_VIA=y CONFIG_PATA_ARTOP=y +CONFIG_PATA_CMD64X=y +CONFIG_PATA_HPT366=y +CONFIG_PATA_HPT37X=y +CONFIG_PATA_HPT3X2N=y +CONFIG_PATA_PDC2027X=y CONFIG_PATA_IXP4XX_CF=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig index ea80e7e867c2..9056284139be 100644 --- a/arch/arm/configs/jornada720_defconfig +++ b/arch/arm/configs/jornada720_defconfig @@ -29,8 +29,9 @@ CONFIG_SA1100_FIR=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECS=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_PCMCIA=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_NET_ETHERNET=y diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig index faa2865658ac..8fc6fd09eb6d 100644 --- a/arch/arm/configs/lart_defconfig +++ b/arch/arm/configs/lart_defconfig @@ -36,8 +36,6 @@ CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_LART=y CONFIG_BLK_DEV_RAM=y -CONFIG_IDE=m -CONFIG_BLK_DEV_IDECD=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_NET_ETHERNET=y diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig index 04efa1b3ef25..e8d26b805be6 100644 --- a/arch/arm/configs/mainstone_defconfig +++ b/arch/arm/configs/mainstone_defconfig @@ -27,7 +27,6 @@ CONFIG_MTD_CFI_ADV_OPTIONS=y CONFIG_MTD_CFI_GEOMETRY=y # CONFIG_MTD_CFI_I1 is not set CONFIG_MTD_CFI_INTELEXT=y -CONFIG_IDE=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_SMC91X=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 2658b80fa263..361686a362f1 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -150,7 +150,6 @@ CONFIG_SPI=y CONFIG_SPI_ATMEL=y CONFIG_SPI_IMX=y CONFIG_SPI_ORION=y -CONFIG_GPIO_SYSFS=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_QNAP=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 437d0740dec6..b01a43851294 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -173,6 +173,11 @@ CONFIG_CAN_RCAR=m CONFIG_CAN_XILINXCAN=y CONFIG_CAN_MCP251X=y CONFIG_NET_DSA_BCM_SF2=m +CONFIG_B53=m +CONFIG_B53_SPI_DRIVER=m +CONFIG_B53_MDIO_DRIVER=m +CONFIG_B53_MMAP_DRIVER=m +CONFIG_B53_SRAB_DRIVER=m CONFIG_CAN_SUN4I=y CONFIG_BT=m CONFIG_BT_MRVL=m @@ -235,6 +240,7 @@ CONFIG_HIX5HD2_GMAC=y CONFIG_SUN4I_EMAC=y CONFIG_MACB=y CONFIG_BCMGENET=m +CONFIG_BGMAC_BCMA=y CONFIG_SYSTEMPORT=m CONFIG_NET_CALXEDA_XGMAC=y CONFIG_GIANFAR=y @@ -404,7 +410,6 @@ CONFIG_PINCTRL_MSM8X74=y CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_PINCTRL_QCOM_SSBI_PMIC=y -CONFIG_GPIO_SYSFS=y CONFIG_GPIO_GENERIC_PLATFORM=y CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_DWAPB=y @@ -450,7 +455,6 @@ CONFIG_RCAR_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_DAVINCI_WATCHDOG=m CONFIG_EXYNOS_THERMAL=m -CONFIG_ST_THERMAL_SYSCFG=y CONFIG_ST_THERMAL_MEMMAP=y CONFIG_WATCHDOG=y CONFIG_DA9063_WATCHDOG=m @@ -467,6 +471,7 @@ CONFIG_MESON_WATCHDOG=y CONFIG_DW_WATCHDOG=y CONFIG_DIGICOLOR_WATCHDOG=y CONFIG_BCM2835_WDT=y +CONFIG_BCM47XX_WATCHDOG=y CONFIG_BCM7038_WDT=m CONFIG_BCM_KONA_WDT=y CONFIG_MFD_ACT8945A=y @@ -489,7 +494,7 @@ CONFIG_MFD_MAX8907=y CONFIG_MFD_MAX8997=y CONFIG_MFD_MAX8998=y CONFIG_MFD_RK808=y -CONFIG_MFD_PM8921_CORE=y +CONFIG_MFD_PM8XXX=y CONFIG_MFD_QCOM_RPM=y CONFIG_MFD_SPMI_PMIC=y CONFIG_MFD_SEC_CORE=y @@ -561,7 +566,9 @@ CONFIG_VIDEO_EXYNOS4_FIMC_IS=m CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m CONFIG_VIDEO_SAMSUNG_S5P_MFC=m +CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m CONFIG_VIDEO_STI_BDISP=m +CONFIG_VIDEO_STI_HVA=m CONFIG_VIDEO_RENESAS_JPU=m CONFIG_VIDEO_RENESAS_VSP1=m CONFIG_V4L_TEST_DRIVERS=y @@ -572,6 +579,7 @@ CONFIG_DRM=y CONFIG_DRM_I2C_ADV7511=m # CONFIG_DRM_I2C_CH7006 is not set # CONFIG_DRM_I2C_SIL164 is not set +CONFIG_DRM_DUMB_VGA_DAC=m CONFIG_DRM_NXP_PTN3460=m CONFIG_DRM_PARADE_PS8622=m CONFIG_DRM_NOUVEAU=m @@ -649,6 +657,9 @@ CONFIG_SND_SOC_AK4642=m CONFIG_SND_SOC_SGTL5000=m CONFIG_SND_SOC_SPDIF=m CONFIG_SND_SOC_WM8978=m +CONFIG_SND_SOC_STI=m +CONFIG_SND_SOC_STI_SAS=m +CONFIG_SND_SIMPLE_CARD=m CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_MVEBU=y @@ -790,6 +801,7 @@ CONFIG_DMA_OMAP=y CONFIG_QCOM_BAM_DMA=y CONFIG_XILINX_DMA=y CONFIG_DMA_SUN6I=y +CONFIG_ST_FDMA=m CONFIG_STAGING=y CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_ISL29028=y @@ -798,6 +810,10 @@ CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y CONFIG_NVEC_POWER=y CONFIG_NVEC_PAZ00=y +CONFIG_BCMA=y +CONFIG_BCMA_HOST_SOC=y +CONFIG_BCMA_DRIVER_GMAC_CMN=y +CONFIG_BCMA_DRIVER_GPIO=y CONFIG_QCOM_GSBI=y CONFIG_QCOM_PM=y CONFIG_QCOM_SMEM=y @@ -823,6 +839,8 @@ CONFIG_HWSPINLOCK_QCOM=y CONFIG_ROCKCHIP_IOMMU=y CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y +CONFIG_REMOTEPROC=m +CONFIG_ST_REMOTEPROC=m CONFIG_PM_DEVFREQ=y CONFIG_ARM_TEGRA_DEVFREQ=m CONFIG_MEMORY=y @@ -850,6 +868,7 @@ CONFIG_PWM_SUN4I=y CONFIG_PWM_TEGRA=y CONFIG_PWM_VT8500=y CONFIG_PHY_HIX5HD2_SATA=y +CONFIG_E1000E=y CONFIG_PWM_STI=y CONFIG_PWM_BCM2835=y CONFIG_PWM_BRCMSTB=m @@ -861,9 +880,7 @@ CONFIG_PHY_ROCKCHIP_DP=m CONFIG_PHY_ROCKCHIP_USB=m CONFIG_PHY_QCOM_APQ8064_SATA=m CONFIG_PHY_MIPHY28LP=y -CONFIG_PHY_MIPHY365X=y CONFIG_PHY_RCAR_GEN2=m -CONFIG_PHY_STIH41X_USB=y CONFIG_PHY_STIH407_USB=y CONFIG_PHY_SUN4I_USB=y CONFIG_PHY_SUN9I_USB=y @@ -876,6 +893,8 @@ CONFIG_BCM2835_MBOX=y CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_EFI_VARS=m CONFIG_EFI_CAPSULE_LOADER=m +CONFIG_CONFIG_BCM47XX_NVRAM=y +CONFIG_BCM47XX_SPROM=y CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig index 4f3dfb21772b..f1395bbd436c 100644 --- a/arch/arm/configs/netwinder_defconfig +++ b/arch/arm/configs/netwinder_defconfig @@ -8,7 +8,7 @@ CONFIG_LEDS_CPU=y CONFIG_DEPRECATED_PARAM_STRUCT=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=0x301" +CONFIG_CMDLINE="root=0x801" CONFIG_FPE_NWFPE=y CONFIG_BINFMT_AOUT=y CONFIG_NET=y @@ -27,8 +27,9 @@ CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_SUPERIO=y CONFIG_BLK_DEV_LOOP=y -CONFIG_IDE=y -CONFIG_BLK_DEV_SL82C105=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_WINBOND=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 0c8a78734536..6ffc9844542d 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -96,14 +96,14 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=2 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_IDE=m -CONFIG_BLK_DEV_IDECS=m CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y CONFIG_CHR_DEV_SG=y +CONFIG_ATA=m +CONFIG_PATA_PCMCIA=m CONFIG_NETDEVICES=y CONFIG_TUN=y CONFIG_PHYLIB=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 53e1a884a1ea..195c98b85568 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -1,7 +1,6 @@ CONFIG_KERNEL_LZMA=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_FHANDLE=y CONFIG_AUDIT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -40,7 +39,6 @@ CONFIG_ARCH_MULTI_V6=y CONFIG_POWER_AVS_OMAP=y CONFIG_POWER_AVS_OMAP_CLASS3=y CONFIG_OMAP_RESET_CLOCKS=y -CONFIG_OMAP_MUX_DEBUG=y CONFIG_ARCH_OMAP2=y CONFIG_ARCH_OMAP3=y CONFIG_ARCH_OMAP4=y @@ -50,7 +48,6 @@ CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y CONFIG_ARM_THUMBEE=y CONFIG_ARM_ERRATA_411920=y -CONFIG_ARM_ERRATA_430973=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_CMA=y @@ -62,7 +59,6 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" CONFIG_KEXEC=y CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y @@ -205,6 +201,7 @@ CONFIG_TOUCHSCREEN_ADS7846=m CONFIG_TOUCHSCREEN_EDT_FT5X06=m CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m CONFIG_TOUCHSCREEN_PIXCIR=m +CONFIG_TOUCHSCREEN_TSC2004=m CONFIG_TOUCHSCREEN_TSC2005=m CONFIG_TOUCHSCREEN_TSC2007=m CONFIG_INPUT_MISC=y @@ -240,14 +237,14 @@ CONFIG_GPIO_PALMAS=y CONFIG_GPIO_TWL4030=y CONFIG_W1=m CONFIG_HDQ_MASTER_OMAP=m +CONFIG_POWER_AVS=y +CONFIG_POWER_RESET=y CONFIG_BATTERY_BQ27XXX=m CONFIG_CHARGER_ISP1704=m CONFIG_CHARGER_TWL4030=m CONFIG_CHARGER_BQ2415X=m CONFIG_CHARGER_BQ24190=m CONFIG_CHARGER_BQ24735=m -CONFIG_POWER_RESET=y -CONFIG_POWER_AVS=y CONFIG_HWMON=m CONFIG_SENSORS_GPIO_FAN=m CONFIG_SENSORS_LM75=m @@ -267,10 +264,13 @@ CONFIG_TWL4030_WATCHDOG=m CONFIG_MFD_TI_AM335X_TSCADC=m CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65217=y +CONFIG_MFD_TI_LP873X=y CONFIG_MFD_TPS65218=y CONFIG_MFD_TPS65910=y CONFIG_TWL6040_CORE=y +CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_LP872X=y +CONFIG_REGULATOR_LP873X=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_PBIAS=y CONFIG_REGULATOR_TI_ABB=y diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index a016ecc0084b..e4314b1227a3 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -411,7 +411,6 @@ CONFIG_MFD_MAX77693=y CONFIG_MFD_MAX8907=m CONFIG_EZX_PCAP=y CONFIG_UCB1400_CORE=m -CONFIG_MFD_PM8921_CORE=m CONFIG_MFD_SEC_CORE=y CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65090=y diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index c2dff4fd5fc4..8c3a0108a231 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -119,7 +119,6 @@ CONFIG_POWER_RESET=y CONFIG_POWER_RESET_MSM=y CONFIG_THERMAL=y CONFIG_MFD_PM8XXX=y -CONFIG_MFD_PM8921_CORE=y CONFIG_MFD_QCOM_RPM=y CONFIG_MFD_SPMI_PMIC=y CONFIG_REGULATOR=y @@ -162,8 +161,8 @@ CONFIG_APQ_MMCC_8084=y CONFIG_IPQ_LCC_806X=y CONFIG_MSM_GCC_8660=y CONFIG_MSM_LCC_8960=y -CONFIG_MSM_GCC_9615=y -CONFIG_MSM_LCC_9615=y +CONFIG_MDM_GCC_9615=y +CONFIG_MDM_LCC_9615=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y CONFIG_HWSPINLOCK_QCOM=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index bc4bfe02e611..4364040ed696 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -219,20 +219,16 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_UB=m CONFIG_BLK_DEV_RAM=y CONFIG_ATA_OVER_ETH=m -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_PLATFORM=y -CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m -CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_ATA=y +CONFIG_PATA_PLATFORM=y CONFIG_NETDEVICES=y CONFIG_DM9000=y CONFIG_INPUT_EVDEV=y diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig index b0b96942f4bd..e52395629810 100644 --- a/arch/arm/configs/shannon_defconfig +++ b/arch/arm/configs/shannon_defconfig @@ -25,7 +25,6 @@ CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_SA1100=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_IDE=m CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_NET_PCMCIA=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index baa07a46a88b..1b0f8ae36fb3 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -2,6 +2,7 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL_SYSCALL=y diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig index 9f84be5b3ac5..2e1d254e06a2 100644 --- a/arch/arm/configs/socfpga_defconfig +++ b/arch/arm/configs/socfpga_defconfig @@ -25,6 +25,7 @@ CONFIG_PCIE_ALTERA_MSI=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_AEABI=y +CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_VFP=y @@ -50,6 +51,10 @@ CONFIG_CAN_DEBUG_DEVICES=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_MTD=y +CONFIG_MTD_SPI_NOR=y +CONFIG_SPI_CADENCE_QUADSPI=y +CONFIG_OF_OVERLAY=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=2 CONFIG_BLK_DEV_RAM_SIZE=8192 @@ -101,18 +106,28 @@ CONFIG_DMADEVICES=y CONFIG_PL330_DMA=y CONFIG_DMATEST=m CONFIG_FPGA=y +CONFIG_FPGA_REGION=y CONFIG_FPGA_MGR_SOCFPGA=y +CONFIG_FPGA_MGR_SOCFPGA_A10=y +CONFIG_FPGA_BRIDGE=y +CONFIG_SOCFPGA_FPGA_BRIDGE=y +CONFIG_ALTERA_FREEZE_BRIDGE=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT3_FS=y +CONFIG_AUTOFS4_FS=y CONFIG_VFAT_FS=y CONFIG_NTFS_FS=y CONFIG_NTFS_RW=y CONFIG_TMPFS=y CONFIG_CONFIGFS_FS=y CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index a1ede1966baf..d8c529332fb4 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -96,15 +96,13 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_SHARPSL=y CONFIG_BLK_DEV_LOOP=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECS=y -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m +CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_MULTI_LUN=y +CONFIG_ATA=y +CONFIG_PATA_PCMCIA=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_USB_CATC=m diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig index 1e5ec2a0e4cf..5a72d694662f 100644 --- a/arch/arm/configs/stm32_defconfig +++ b/arch/arm/configs/stm32_defconfig @@ -38,8 +38,7 @@ CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set # CONFIG_BLK_DEV is not set CONFIG_EEPROM_93CX6=y -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set +CONFIG_KEYBOARD_GPIO=y # CONFIG_VT is not set # CONFIG_UNIX98_PTYS is not set # CONFIG_LEGACY_PTYS is not set diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 714da336ec86..dfeee5c51b40 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -98,6 +98,7 @@ CONFIG_MEDIA_RC_SUPPORT=y CONFIG_RC_DEVICES=y CONFIG_IR_SUNXI=y CONFIG_DRM=y +CONFIG_DRM_DUMB_VGA_DAC=y CONFIG_DRM_SUN4I=y CONFIG_FB=y CONFIG_FB_SIMPLE=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 6012a1ec779f..844eeef5a509 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -1,16 +1,15 @@ CONFIG_SYSVIPC=y -CONFIG_FHANDLE=y CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CGROUPS=y -CONFIG_CGROUP_DEBUG=y -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_CPUACCT=y CONFIG_CGROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_DEBUG=y CONFIG_BLK_DEV_INITRD=y # CONFIG_ELF_CORE is not set CONFIG_EMBEDDED=y @@ -24,14 +23,10 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_TEGRA=y -CONFIG_ARCH_TEGRA_2x_SOC=y -CONFIG_ARCH_TEGRA_3x_SOC=y -CONFIG_ARCH_TEGRA_114_SOC=y -CONFIG_ARCH_TEGRA_124_SOC=y CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y CONFIG_PCI_MSI=y CONFIG_PCI_TEGRA=y -CONFIG_PCIEPORTBUS=y CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_AEABI=y @@ -41,7 +36,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_KEXEC=y CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPUFREQ_DT=y CONFIG_CPU_IDLE=y @@ -59,7 +53,6 @@ CONFIG_IP_PNP_RARP=y CONFIG_INET_ESP=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_OPTIMISTIC_DAD=y @@ -86,6 +79,7 @@ CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 +CONFIG_TEGRA_GMI=y CONFIG_MTD=y CONFIG_MTD_M25P80=y CONFIG_MTD_SPI_NOR=y @@ -131,8 +125,8 @@ CONFIG_INPUT_MPU3050=y # CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_TEGRA=y CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_TEGRA=y # CONFIG_HW_RANDOM is not set # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y @@ -151,11 +145,11 @@ CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_PALMAS=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y -CONFIG_BATTERY_SBS=y -CONFIG_CHARGER_TPS65090=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_AS3722=y CONFIG_POWER_RESET_GPIO=y +CONFIG_BATTERY_SBS=y +CONFIG_CHARGER_TPS65090=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM95245=y CONFIG_WATCHDOG=y @@ -216,6 +210,7 @@ CONFIG_SND_SOC_TEGRA_WM9712=y CONFIG_SND_SOC_TEGRA_TRIMSLICE=y CONFIG_SND_SOC_TEGRA_ALC5632=y CONFIG_SND_SOC_TEGRA_MAX98090=y +CONFIG_SND_SOC_TEGRA_SGTL5000=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_TEGRA=y @@ -262,6 +257,10 @@ CONFIG_NVEC_POWER=y CONFIG_NVEC_PAZ00=y CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y +CONFIG_ARCH_TEGRA_2x_SOC=y +CONFIG_ARCH_TEGRA_3x_SOC=y +CONFIG_ARCH_TEGRA_114_SOC=y +CONFIG_ARCH_TEGRA_124_SOC=y CONFIG_MEMORY=y CONFIG_IIO=y CONFIG_AK8975=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index b7b09189f1c5..e2151a7aaf49 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -4,7 +4,6 @@ CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y -CONFIG_PERF_EVENTS=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set @@ -26,7 +25,6 @@ CONFIG_CPU_IDLE=y CONFIG_ARM_U8500_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -108,18 +106,19 @@ CONFIG_DMADEVICES=y CONFIG_STE_DMA40=y CONFIG_HSEM_U8500=y CONFIG_IIO=y -CONFIG_IIO_BUFFER=y +CONFIG_IIO_SW_TRIGGER=y CONFIG_IIO_ST_ACCEL_3AXIS=y CONFIG_IIO_ST_GYRO_3AXIS=y CONFIG_BH1780=y +CONFIG_AK8974=y CONFIG_IIO_ST_MAGN_3AXIS=y +CONFIG_IIO_HRTIMER_TRIGGER=y CONFIG_IIO_ST_PRESS=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y -CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y diff --git a/arch/arm/crypto/Kconfig b/arch/arm/crypto/Kconfig index 27ed1b1cd1d7..13f1b4c289d4 100644 --- a/arch/arm/crypto/Kconfig +++ b/arch/arm/crypto/Kconfig @@ -88,9 +88,9 @@ config CRYPTO_AES_ARM config CRYPTO_AES_ARM_BS tristate "Bit sliced AES using NEON instructions" depends on KERNEL_MODE_NEON - select CRYPTO_ALGAPI select CRYPTO_AES_ARM - select CRYPTO_ABLK_HELPER + select CRYPTO_BLKCIPHER + select CRYPTO_SIMD help Use a faster and more secure NEON based implementation of AES in CBC, CTR and XTS modes @@ -104,8 +104,8 @@ config CRYPTO_AES_ARM_BS config CRYPTO_AES_ARM_CE tristate "Accelerated AES using ARMv8 Crypto Extensions" depends on KERNEL_MODE_NEON - select CRYPTO_ALGAPI - select CRYPTO_ABLK_HELPER + select CRYPTO_BLKCIPHER + select CRYPTO_SIMD help Use an implementation of AES in CBC, CTR and XTS modes that uses ARMv8 Crypto Extensions @@ -120,4 +120,14 @@ config CRYPTO_GHASH_ARM_CE that uses the 64x64 to 128 bit polynomial multiplication (vmull.p64) that is part of the ARMv8 Crypto Extensions +config CRYPTO_CRCT10DIF_ARM_CE + tristate "CRCT10DIF digest algorithm using PMULL instructions" + depends on KERNEL_MODE_NEON && CRC_T10DIF + select CRYPTO_HASH + +config CRYPTO_CRC32_ARM_CE + tristate "CRC32(C) digest algorithm using CRC and/or PMULL instructions" + depends on KERNEL_MODE_NEON && CRC32 + select CRYPTO_HASH + endif diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile index fc5150702b64..b578a1820ab1 100644 --- a/arch/arm/crypto/Makefile +++ b/arch/arm/crypto/Makefile @@ -13,6 +13,8 @@ ce-obj-$(CONFIG_CRYPTO_AES_ARM_CE) += aes-arm-ce.o ce-obj-$(CONFIG_CRYPTO_SHA1_ARM_CE) += sha1-arm-ce.o ce-obj-$(CONFIG_CRYPTO_SHA2_ARM_CE) += sha2-arm-ce.o ce-obj-$(CONFIG_CRYPTO_GHASH_ARM_CE) += ghash-arm-ce.o +ce-obj-$(CONFIG_CRYPTO_CRCT10DIF_ARM_CE) += crct10dif-arm-ce.o +ce-obj-$(CONFIG_CRYPTO_CRC32_ARM_CE) += crc32-arm-ce.o ifneq ($(ce-obj-y)$(ce-obj-m),) ifeq ($(call as-instr,.fpu crypto-neon-fp-armv8,y,n),y) @@ -36,6 +38,8 @@ sha1-arm-ce-y := sha1-ce-core.o sha1-ce-glue.o sha2-arm-ce-y := sha2-ce-core.o sha2-ce-glue.o aes-arm-ce-y := aes-ce-core.o aes-ce-glue.o ghash-arm-ce-y := ghash-ce-core.o ghash-ce-glue.o +crct10dif-arm-ce-y := crct10dif-ce-core.o crct10dif-ce-glue.o +crc32-arm-ce-y:= crc32-ce-core.o crc32-ce-glue.o quiet_cmd_perl = PERL $@ cmd_perl = $(PERL) $(<) > $(@) diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c index aef022a87c53..8857531915bf 100644 --- a/arch/arm/crypto/aes-ce-glue.c +++ b/arch/arm/crypto/aes-ce-glue.c @@ -12,8 +12,8 @@ #include <asm/neon.h> #include <asm/hwcap.h> #include <crypto/aes.h> -#include <crypto/ablk_helper.h> -#include <crypto/algapi.h> +#include <crypto/internal/simd.h> +#include <crypto/internal/skcipher.h> #include <linux/module.h> #include <crypto/xts.h> @@ -88,8 +88,13 @@ static int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key, u32 *rki = ctx->key_enc + (i * kwords); u32 *rko = rki + kwords; +#ifndef CONFIG_CPU_BIG_ENDIAN rko[0] = ror32(ce_aes_sub(rki[kwords - 1]), 8); rko[0] = rko[0] ^ rki[0] ^ rcon[i]; +#else + rko[0] = rol32(ce_aes_sub(rki[kwords - 1]), 8); + rko[0] = rko[0] ^ rki[0] ^ (rcon[i] << 24); +#endif rko[1] = rko[0] ^ rki[1]; rko[2] = rko[1] ^ rki[2]; rko[3] = rko[2] ^ rki[3]; @@ -128,17 +133,17 @@ static int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key, return 0; } -static int ce_aes_setkey(struct crypto_tfm *tfm, const u8 *in_key, +static int ce_aes_setkey(struct crypto_skcipher *tfm, const u8 *in_key, unsigned int key_len) { - struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm); + struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm); int ret; ret = ce_aes_expandkey(ctx, in_key, key_len); if (!ret) return 0; - tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + crypto_skcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); return -EINVAL; } @@ -147,13 +152,13 @@ struct crypto_aes_xts_ctx { struct crypto_aes_ctx __aligned(8) key2; }; -static int xts_set_key(struct crypto_tfm *tfm, const u8 *in_key, +static int xts_set_key(struct crypto_skcipher *tfm, const u8 *in_key, unsigned int key_len) { - struct crypto_aes_xts_ctx *ctx = crypto_tfm_ctx(tfm); + struct crypto_aes_xts_ctx *ctx = crypto_skcipher_ctx(tfm); int ret; - ret = xts_check_key(tfm, in_key, key_len); + ret = xts_verify_key(tfm, in_key, key_len); if (ret) return ret; @@ -164,130 +169,113 @@ static int xts_set_key(struct crypto_tfm *tfm, const u8 *in_key, if (!ret) return 0; - tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + crypto_skcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); return -EINVAL; } -static int ecb_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, - struct scatterlist *src, unsigned int nbytes) +static int ecb_encrypt(struct skcipher_request *req) { - struct crypto_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); - struct blkcipher_walk walk; + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm); + struct skcipher_walk walk; unsigned int blocks; int err; - desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; - blkcipher_walk_init(&walk, dst, src, nbytes); - err = blkcipher_walk_virt(desc, &walk); + err = skcipher_walk_virt(&walk, req, true); kernel_neon_begin(); while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { ce_aes_ecb_encrypt(walk.dst.virt.addr, walk.src.virt.addr, (u8 *)ctx->key_enc, num_rounds(ctx), blocks); - err = blkcipher_walk_done(desc, &walk, - walk.nbytes % AES_BLOCK_SIZE); + err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); } kernel_neon_end(); return err; } -static int ecb_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, - struct scatterlist *src, unsigned int nbytes) +static int ecb_decrypt(struct skcipher_request *req) { - struct crypto_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); - struct blkcipher_walk walk; + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm); + struct skcipher_walk walk; unsigned int blocks; int err; - desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; - blkcipher_walk_init(&walk, dst, src, nbytes); - err = blkcipher_walk_virt(desc, &walk); + err = skcipher_walk_virt(&walk, req, true); kernel_neon_begin(); while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { ce_aes_ecb_decrypt(walk.dst.virt.addr, walk.src.virt.addr, (u8 *)ctx->key_dec, num_rounds(ctx), blocks); - err = blkcipher_walk_done(desc, &walk, - walk.nbytes % AES_BLOCK_SIZE); + err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); } kernel_neon_end(); return err; } -static int cbc_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, - struct scatterlist *src, unsigned int nbytes) +static int cbc_encrypt(struct skcipher_request *req) { - struct crypto_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); - struct blkcipher_walk walk; + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm); + struct skcipher_walk walk; unsigned int blocks; int err; - desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; - blkcipher_walk_init(&walk, dst, src, nbytes); - err = blkcipher_walk_virt(desc, &walk); + err = skcipher_walk_virt(&walk, req, true); kernel_neon_begin(); while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { ce_aes_cbc_encrypt(walk.dst.virt.addr, walk.src.virt.addr, (u8 *)ctx->key_enc, num_rounds(ctx), blocks, walk.iv); - err = blkcipher_walk_done(desc, &walk, - walk.nbytes % AES_BLOCK_SIZE); + err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); } kernel_neon_end(); return err; } -static int cbc_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, - struct scatterlist *src, unsigned int nbytes) +static int cbc_decrypt(struct skcipher_request *req) { - struct crypto_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); - struct blkcipher_walk walk; + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm); + struct skcipher_walk walk; unsigned int blocks; int err; - desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; - blkcipher_walk_init(&walk, dst, src, nbytes); - err = blkcipher_walk_virt(desc, &walk); + err = skcipher_walk_virt(&walk, req, true); kernel_neon_begin(); while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { ce_aes_cbc_decrypt(walk.dst.virt.addr, walk.src.virt.addr, (u8 *)ctx->key_dec, num_rounds(ctx), blocks, walk.iv); - err = blkcipher_walk_done(desc, &walk, - walk.nbytes % AES_BLOCK_SIZE); + err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); } kernel_neon_end(); return err; } -static int ctr_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, - struct scatterlist *src, unsigned int nbytes) +static int ctr_encrypt(struct skcipher_request *req) { - struct crypto_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); - struct blkcipher_walk walk; + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm); + struct skcipher_walk walk; int err, blocks; - desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; - blkcipher_walk_init(&walk, dst, src, nbytes); - err = blkcipher_walk_virt_block(desc, &walk, AES_BLOCK_SIZE); + err = skcipher_walk_virt(&walk, req, true); kernel_neon_begin(); while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { ce_aes_ctr_encrypt(walk.dst.virt.addr, walk.src.virt.addr, (u8 *)ctx->key_enc, num_rounds(ctx), blocks, walk.iv); - nbytes -= blocks * AES_BLOCK_SIZE; - if (nbytes && nbytes == walk.nbytes % AES_BLOCK_SIZE) - break; - err = blkcipher_walk_done(desc, &walk, - walk.nbytes % AES_BLOCK_SIZE); + err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); } - if (walk.nbytes % AES_BLOCK_SIZE) { - u8 *tdst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE; - u8 *tsrc = walk.src.virt.addr + blocks * AES_BLOCK_SIZE; + if (walk.nbytes) { u8 __aligned(8) tail[AES_BLOCK_SIZE]; + unsigned int nbytes = walk.nbytes; + u8 *tdst = walk.dst.virt.addr; + u8 *tsrc = walk.src.virt.addr; /* * Minimum alignment is 8 bytes, so if nbytes is <= 8, we need @@ -298,231 +286,172 @@ static int ctr_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, ce_aes_ctr_encrypt(tail, tsrc, (u8 *)ctx->key_enc, num_rounds(ctx), blocks, walk.iv); memcpy(tdst, tail, nbytes); - err = blkcipher_walk_done(desc, &walk, 0); + err = skcipher_walk_done(&walk, 0); } kernel_neon_end(); return err; } -static int xts_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, - struct scatterlist *src, unsigned int nbytes) +static int xts_encrypt(struct skcipher_request *req) { - struct crypto_aes_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct crypto_aes_xts_ctx *ctx = crypto_skcipher_ctx(tfm); int err, first, rounds = num_rounds(&ctx->key1); - struct blkcipher_walk walk; + struct skcipher_walk walk; unsigned int blocks; - desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; - blkcipher_walk_init(&walk, dst, src, nbytes); - err = blkcipher_walk_virt(desc, &walk); + err = skcipher_walk_virt(&walk, req, true); kernel_neon_begin(); for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) { ce_aes_xts_encrypt(walk.dst.virt.addr, walk.src.virt.addr, (u8 *)ctx->key1.key_enc, rounds, blocks, walk.iv, (u8 *)ctx->key2.key_enc, first); - err = blkcipher_walk_done(desc, &walk, - walk.nbytes % AES_BLOCK_SIZE); + err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); } kernel_neon_end(); return err; } -static int xts_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, - struct scatterlist *src, unsigned int nbytes) +static int xts_decrypt(struct skcipher_request *req) { - struct crypto_aes_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct crypto_aes_xts_ctx *ctx = crypto_skcipher_ctx(tfm); int err, first, rounds = num_rounds(&ctx->key1); - struct blkcipher_walk walk; + struct skcipher_walk walk; unsigned int blocks; - desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; - blkcipher_walk_init(&walk, dst, src, nbytes); - err = blkcipher_walk_virt(desc, &walk); + err = skcipher_walk_virt(&walk, req, true); kernel_neon_begin(); for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) { ce_aes_xts_decrypt(walk.dst.virt.addr, walk.src.virt.addr, (u8 *)ctx->key1.key_dec, rounds, blocks, walk.iv, (u8 *)ctx->key2.key_enc, first); - err = blkcipher_walk_done(desc, &walk, - walk.nbytes % AES_BLOCK_SIZE); + err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); } kernel_neon_end(); return err; } -static struct crypto_alg aes_algs[] = { { - .cra_name = "__ecb-aes-ce", - .cra_driver_name = "__driver-ecb-aes-ce", - .cra_priority = 0, - .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | - CRYPTO_ALG_INTERNAL, - .cra_blocksize = AES_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct crypto_aes_ctx), - .cra_alignmask = 7, - .cra_type = &crypto_blkcipher_type, - .cra_module = THIS_MODULE, - .cra_blkcipher = { - .min_keysize = AES_MIN_KEY_SIZE, - .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = 0, - .setkey = ce_aes_setkey, - .encrypt = ecb_encrypt, - .decrypt = ecb_decrypt, +static struct skcipher_alg aes_algs[] = { { + .base = { + .cra_name = "__ecb(aes)", + .cra_driver_name = "__ecb-aes-ce", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_INTERNAL, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_ctx), + .cra_alignmask = 7, + .cra_module = THIS_MODULE, }, + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .setkey = ce_aes_setkey, + .encrypt = ecb_encrypt, + .decrypt = ecb_decrypt, }, { - .cra_name = "__cbc-aes-ce", - .cra_driver_name = "__driver-cbc-aes-ce", - .cra_priority = 0, - .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | - CRYPTO_ALG_INTERNAL, - .cra_blocksize = AES_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct crypto_aes_ctx), - .cra_alignmask = 7, - .cra_type = &crypto_blkcipher_type, - .cra_module = THIS_MODULE, - .cra_blkcipher = { - .min_keysize = AES_MIN_KEY_SIZE, - .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, - .setkey = ce_aes_setkey, - .encrypt = cbc_encrypt, - .decrypt = cbc_decrypt, + .base = { + .cra_name = "__cbc(aes)", + .cra_driver_name = "__cbc-aes-ce", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_INTERNAL, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_ctx), + .cra_alignmask = 7, + .cra_module = THIS_MODULE, }, + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ce_aes_setkey, + .encrypt = cbc_encrypt, + .decrypt = cbc_decrypt, }, { - .cra_name = "__ctr-aes-ce", - .cra_driver_name = "__driver-ctr-aes-ce", - .cra_priority = 0, - .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | - CRYPTO_ALG_INTERNAL, - .cra_blocksize = 1, - .cra_ctxsize = sizeof(struct crypto_aes_ctx), - .cra_alignmask = 7, - .cra_type = &crypto_blkcipher_type, - .cra_module = THIS_MODULE, - .cra_blkcipher = { - .min_keysize = AES_MIN_KEY_SIZE, - .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, - .setkey = ce_aes_setkey, - .encrypt = ctr_encrypt, - .decrypt = ctr_encrypt, + .base = { + .cra_name = "__ctr(aes)", + .cra_driver_name = "__ctr-aes-ce", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_INTERNAL, + .cra_blocksize = 1, + .cra_ctxsize = sizeof(struct crypto_aes_ctx), + .cra_alignmask = 7, + .cra_module = THIS_MODULE, }, + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .chunksize = AES_BLOCK_SIZE, + .setkey = ce_aes_setkey, + .encrypt = ctr_encrypt, + .decrypt = ctr_encrypt, }, { - .cra_name = "__xts-aes-ce", - .cra_driver_name = "__driver-xts-aes-ce", - .cra_priority = 0, - .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | - CRYPTO_ALG_INTERNAL, - .cra_blocksize = AES_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct crypto_aes_xts_ctx), - .cra_alignmask = 7, - .cra_type = &crypto_blkcipher_type, - .cra_module = THIS_MODULE, - .cra_blkcipher = { - .min_keysize = 2 * AES_MIN_KEY_SIZE, - .max_keysize = 2 * AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, - .setkey = xts_set_key, - .encrypt = xts_encrypt, - .decrypt = xts_decrypt, + .base = { + .cra_name = "__xts(aes)", + .cra_driver_name = "__xts-aes-ce", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_INTERNAL, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_xts_ctx), + .cra_alignmask = 7, + .cra_module = THIS_MODULE, }, -}, { - .cra_name = "ecb(aes)", - .cra_driver_name = "ecb-aes-ce", - .cra_priority = 300, - .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, - .cra_blocksize = AES_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct async_helper_ctx), - .cra_alignmask = 7, - .cra_type = &crypto_ablkcipher_type, - .cra_module = THIS_MODULE, - .cra_init = ablk_init, - .cra_exit = ablk_exit, - .cra_ablkcipher = { - .min_keysize = AES_MIN_KEY_SIZE, - .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = 0, - .setkey = ablk_set_key, - .encrypt = ablk_encrypt, - .decrypt = ablk_decrypt, - } -}, { - .cra_name = "cbc(aes)", - .cra_driver_name = "cbc-aes-ce", - .cra_priority = 300, - .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, - .cra_blocksize = AES_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct async_helper_ctx), - .cra_alignmask = 7, - .cra_type = &crypto_ablkcipher_type, - .cra_module = THIS_MODULE, - .cra_init = ablk_init, - .cra_exit = ablk_exit, - .cra_ablkcipher = { - .min_keysize = AES_MIN_KEY_SIZE, - .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, - .setkey = ablk_set_key, - .encrypt = ablk_encrypt, - .decrypt = ablk_decrypt, - } -}, { - .cra_name = "ctr(aes)", - .cra_driver_name = "ctr-aes-ce", - .cra_priority = 300, - .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, - .cra_blocksize = 1, - .cra_ctxsize = sizeof(struct async_helper_ctx), - .cra_alignmask = 7, - .cra_type = &crypto_ablkcipher_type, - .cra_module = THIS_MODULE, - .cra_init = ablk_init, - .cra_exit = ablk_exit, - .cra_ablkcipher = { - .min_keysize = AES_MIN_KEY_SIZE, - .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, - .setkey = ablk_set_key, - .encrypt = ablk_encrypt, - .decrypt = ablk_decrypt, - } -}, { - .cra_name = "xts(aes)", - .cra_driver_name = "xts-aes-ce", - .cra_priority = 300, - .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, - .cra_blocksize = AES_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct async_helper_ctx), - .cra_alignmask = 7, - .cra_type = &crypto_ablkcipher_type, - .cra_module = THIS_MODULE, - .cra_init = ablk_init, - .cra_exit = ablk_exit, - .cra_ablkcipher = { - .min_keysize = 2 * AES_MIN_KEY_SIZE, - .max_keysize = 2 * AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, - .setkey = ablk_set_key, - .encrypt = ablk_encrypt, - .decrypt = ablk_decrypt, - } + .min_keysize = 2 * AES_MIN_KEY_SIZE, + .max_keysize = 2 * AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = xts_set_key, + .encrypt = xts_encrypt, + .decrypt = xts_decrypt, } }; +static struct simd_skcipher_alg *aes_simd_algs[ARRAY_SIZE(aes_algs)]; + +static void aes_exit(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(aes_simd_algs) && aes_simd_algs[i]; i++) + simd_skcipher_free(aes_simd_algs[i]); + + crypto_unregister_skciphers(aes_algs, ARRAY_SIZE(aes_algs)); +} + static int __init aes_init(void) { + struct simd_skcipher_alg *simd; + const char *basename; + const char *algname; + const char *drvname; + int err; + int i; + if (!(elf_hwcap2 & HWCAP2_AES)) return -ENODEV; - return crypto_register_algs(aes_algs, ARRAY_SIZE(aes_algs)); -} -static void __exit aes_exit(void) -{ - crypto_unregister_algs(aes_algs, ARRAY_SIZE(aes_algs)); + err = crypto_register_skciphers(aes_algs, ARRAY_SIZE(aes_algs)); + if (err) + return err; + + for (i = 0; i < ARRAY_SIZE(aes_algs); i++) { + algname = aes_algs[i].base.cra_name + 2; + drvname = aes_algs[i].base.cra_driver_name + 2; + basename = aes_algs[i].base.cra_driver_name; + simd = simd_skcipher_create_compat(algname, drvname, basename); + err = PTR_ERR(simd); + if (IS_ERR(simd)) + goto unregister_simds; + + aes_simd_algs[i] = simd; + } + + return 0; + +unregister_simds: + aes_exit(); + return err; } module_init(aes_init); diff --git a/arch/arm/crypto/aesbs-glue.c b/arch/arm/crypto/aesbs-glue.c index 0511a6cafe24..d8e06de72ef3 100644 --- a/arch/arm/crypto/aesbs-glue.c +++ b/arch/arm/crypto/aesbs-glue.c @@ -10,8 +10,9 @@ #include <asm/neon.h> #include <crypto/aes.h> -#include <crypto/ablk_helper.h> -#include <crypto/algapi.h> +#include <crypto/cbc.h> +#include <crypto/internal/simd.h> +#include <crypto/internal/skcipher.h> #include <linux/module.h> #include <crypto/xts.h> @@ -55,14 +56,14 @@ struct aesbs_xts_ctx { struct AES_KEY twkey; }; -static int aesbs_cbc_set_key(struct crypto_tfm *tfm, const u8 *in_key, +static int aesbs_cbc_set_key(struct crypto_skcipher *tfm, const u8 *in_key, unsigned int key_len) { - struct aesbs_cbc_ctx *ctx = crypto_tfm_ctx(tfm); + struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); int bits = key_len * 8; if (private_AES_set_encrypt_key(in_key, bits, &ctx->enc)) { - tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + crypto_skcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); return -EINVAL; } ctx->dec.rk = ctx->enc; @@ -71,33 +72,33 @@ static int aesbs_cbc_set_key(struct crypto_tfm *tfm, const u8 *in_key, return 0; } -static int aesbs_ctr_set_key(struct crypto_tfm *tfm, const u8 *in_key, +static int aesbs_ctr_set_key(struct crypto_skcipher *tfm, const u8 *in_key, unsigned int key_len) { - struct aesbs_ctr_ctx *ctx = crypto_tfm_ctx(tfm); + struct aesbs_ctr_ctx *ctx = crypto_skcipher_ctx(tfm); int bits = key_len * 8; if (private_AES_set_encrypt_key(in_key, bits, &ctx->enc.rk)) { - tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + crypto_skcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); return -EINVAL; } ctx->enc.converted = 0; return 0; } -static int aesbs_xts_set_key(struct crypto_tfm *tfm, const u8 *in_key, +static int aesbs_xts_set_key(struct crypto_skcipher *tfm, const u8 *in_key, unsigned int key_len) { - struct aesbs_xts_ctx *ctx = crypto_tfm_ctx(tfm); + struct aesbs_xts_ctx *ctx = crypto_skcipher_ctx(tfm); int bits = key_len * 4; int err; - err = xts_check_key(tfm, in_key, key_len); + err = xts_verify_key(tfm, in_key, key_len); if (err) return err; if (private_AES_set_encrypt_key(in_key, bits, &ctx->enc.rk)) { - tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + crypto_skcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); return -EINVAL; } ctx->dec.rk = ctx->enc.rk; @@ -107,88 +108,52 @@ static int aesbs_xts_set_key(struct crypto_tfm *tfm, const u8 *in_key, return 0; } -static int aesbs_cbc_encrypt(struct blkcipher_desc *desc, - struct scatterlist *dst, - struct scatterlist *src, unsigned int nbytes) +static inline void aesbs_encrypt_one(struct crypto_skcipher *tfm, + const u8 *src, u8 *dst) { - struct aesbs_cbc_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); - struct blkcipher_walk walk; - int err; + struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); - blkcipher_walk_init(&walk, dst, src, nbytes); - err = blkcipher_walk_virt(desc, &walk); + AES_encrypt(src, dst, &ctx->enc); +} - while (walk.nbytes) { - u32 blocks = walk.nbytes / AES_BLOCK_SIZE; - u8 *src = walk.src.virt.addr; +static int aesbs_cbc_encrypt(struct skcipher_request *req) +{ + return crypto_cbc_encrypt_walk(req, aesbs_encrypt_one); +} - if (walk.dst.virt.addr == walk.src.virt.addr) { - u8 *iv = walk.iv; - - do { - crypto_xor(src, iv, AES_BLOCK_SIZE); - AES_encrypt(src, src, &ctx->enc); - iv = src; - src += AES_BLOCK_SIZE; - } while (--blocks); - memcpy(walk.iv, iv, AES_BLOCK_SIZE); - } else { - u8 *dst = walk.dst.virt.addr; - - do { - crypto_xor(walk.iv, src, AES_BLOCK_SIZE); - AES_encrypt(walk.iv, dst, &ctx->enc); - memcpy(walk.iv, dst, AES_BLOCK_SIZE); - src += AES_BLOCK_SIZE; - dst += AES_BLOCK_SIZE; - } while (--blocks); - } - err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE); - } - return err; +static inline void aesbs_decrypt_one(struct crypto_skcipher *tfm, + const u8 *src, u8 *dst) +{ + struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); + + AES_decrypt(src, dst, &ctx->dec.rk); } -static int aesbs_cbc_decrypt(struct blkcipher_desc *desc, - struct scatterlist *dst, - struct scatterlist *src, unsigned int nbytes) +static int aesbs_cbc_decrypt(struct skcipher_request *req) { - struct aesbs_cbc_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); - struct blkcipher_walk walk; + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); + struct skcipher_walk walk; + unsigned int nbytes; int err; - blkcipher_walk_init(&walk, dst, src, nbytes); - err = blkcipher_walk_virt_block(desc, &walk, 8 * AES_BLOCK_SIZE); - - while ((walk.nbytes / AES_BLOCK_SIZE) >= 8) { - kernel_neon_begin(); - bsaes_cbc_encrypt(walk.src.virt.addr, walk.dst.virt.addr, - walk.nbytes, &ctx->dec, walk.iv); - kernel_neon_end(); - err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE); - } - while (walk.nbytes) { - u32 blocks = walk.nbytes / AES_BLOCK_SIZE; + for (err = skcipher_walk_virt(&walk, req, false); + (nbytes = walk.nbytes); err = skcipher_walk_done(&walk, nbytes)) { + u32 blocks = nbytes / AES_BLOCK_SIZE; u8 *dst = walk.dst.virt.addr; u8 *src = walk.src.virt.addr; - u8 bk[2][AES_BLOCK_SIZE]; u8 *iv = walk.iv; - do { - if (walk.dst.virt.addr == walk.src.virt.addr) - memcpy(bk[blocks & 1], src, AES_BLOCK_SIZE); - - AES_decrypt(src, dst, &ctx->dec.rk); - crypto_xor(dst, iv, AES_BLOCK_SIZE); - - if (walk.dst.virt.addr == walk.src.virt.addr) - iv = bk[blocks & 1]; - else - iv = src; + if (blocks >= 8) { + kernel_neon_begin(); + bsaes_cbc_encrypt(src, dst, nbytes, &ctx->dec, iv); + kernel_neon_end(); + nbytes %= AES_BLOCK_SIZE; + continue; + } - dst += AES_BLOCK_SIZE; - src += AES_BLOCK_SIZE; - } while (--blocks); - err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE); + nbytes = crypto_cbc_decrypt_blocks(&walk, tfm, + aesbs_decrypt_one); } return err; } @@ -206,17 +171,15 @@ static void inc_be128_ctr(__be32 ctr[], u32 addend) } } -static int aesbs_ctr_encrypt(struct blkcipher_desc *desc, - struct scatterlist *dst, struct scatterlist *src, - unsigned int nbytes) +static int aesbs_ctr_encrypt(struct skcipher_request *req) { - struct aesbs_ctr_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); - struct blkcipher_walk walk; + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct aesbs_ctr_ctx *ctx = crypto_skcipher_ctx(tfm); + struct skcipher_walk walk; u32 blocks; int err; - blkcipher_walk_init(&walk, dst, src, nbytes); - err = blkcipher_walk_virt_block(desc, &walk, 8 * AES_BLOCK_SIZE); + err = skcipher_walk_virt(&walk, req, false); while ((blocks = walk.nbytes / AES_BLOCK_SIZE)) { u32 tail = walk.nbytes % AES_BLOCK_SIZE; @@ -235,11 +198,7 @@ static int aesbs_ctr_encrypt(struct blkcipher_desc *desc, kernel_neon_end(); inc_be128_ctr(ctr, blocks); - nbytes -= blocks * AES_BLOCK_SIZE; - if (nbytes && nbytes == tail && nbytes <= AES_BLOCK_SIZE) - break; - - err = blkcipher_walk_done(desc, &walk, tail); + err = skcipher_walk_done(&walk, tail); } if (walk.nbytes) { u8 *tdst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE; @@ -248,23 +207,21 @@ static int aesbs_ctr_encrypt(struct blkcipher_desc *desc, AES_encrypt(walk.iv, ks, &ctx->enc.rk); if (tdst != tsrc) - memcpy(tdst, tsrc, nbytes); - crypto_xor(tdst, ks, nbytes); - err = blkcipher_walk_done(desc, &walk, 0); + memcpy(tdst, tsrc, walk.nbytes); + crypto_xor(tdst, ks, walk.nbytes); + err = skcipher_walk_done(&walk, 0); } return err; } -static int aesbs_xts_encrypt(struct blkcipher_desc *desc, - struct scatterlist *dst, - struct scatterlist *src, unsigned int nbytes) +static int aesbs_xts_encrypt(struct skcipher_request *req) { - struct aesbs_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); - struct blkcipher_walk walk; + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct aesbs_xts_ctx *ctx = crypto_skcipher_ctx(tfm); + struct skcipher_walk walk; int err; - blkcipher_walk_init(&walk, dst, src, nbytes); - err = blkcipher_walk_virt_block(desc, &walk, 8 * AES_BLOCK_SIZE); + err = skcipher_walk_virt(&walk, req, false); /* generate the initial tweak */ AES_encrypt(walk.iv, walk.iv, &ctx->twkey); @@ -274,21 +231,19 @@ static int aesbs_xts_encrypt(struct blkcipher_desc *desc, bsaes_xts_encrypt(walk.src.virt.addr, walk.dst.virt.addr, walk.nbytes, &ctx->enc, walk.iv); kernel_neon_end(); - err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE); + err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); } return err; } -static int aesbs_xts_decrypt(struct blkcipher_desc *desc, - struct scatterlist *dst, - struct scatterlist *src, unsigned int nbytes) +static int aesbs_xts_decrypt(struct skcipher_request *req) { - struct aesbs_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); - struct blkcipher_walk walk; + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct aesbs_xts_ctx *ctx = crypto_skcipher_ctx(tfm); + struct skcipher_walk walk; int err; - blkcipher_walk_init(&walk, dst, src, nbytes); - err = blkcipher_walk_virt_block(desc, &walk, 8 * AES_BLOCK_SIZE); + err = skcipher_walk_virt(&walk, req, false); /* generate the initial tweak */ AES_encrypt(walk.iv, walk.iv, &ctx->twkey); @@ -298,141 +253,110 @@ static int aesbs_xts_decrypt(struct blkcipher_desc *desc, bsaes_xts_decrypt(walk.src.virt.addr, walk.dst.virt.addr, walk.nbytes, &ctx->dec, walk.iv); kernel_neon_end(); - err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE); + err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); } return err; } -static struct crypto_alg aesbs_algs[] = { { - .cra_name = "__cbc-aes-neonbs", - .cra_driver_name = "__driver-cbc-aes-neonbs", - .cra_priority = 0, - .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | - CRYPTO_ALG_INTERNAL, - .cra_blocksize = AES_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct aesbs_cbc_ctx), - .cra_alignmask = 7, - .cra_type = &crypto_blkcipher_type, - .cra_module = THIS_MODULE, - .cra_blkcipher = { - .min_keysize = AES_MIN_KEY_SIZE, - .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, - .setkey = aesbs_cbc_set_key, - .encrypt = aesbs_cbc_encrypt, - .decrypt = aesbs_cbc_decrypt, +static struct skcipher_alg aesbs_algs[] = { { + .base = { + .cra_name = "__cbc(aes)", + .cra_driver_name = "__cbc-aes-neonbs", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_INTERNAL, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct aesbs_cbc_ctx), + .cra_alignmask = 7, + .cra_module = THIS_MODULE, }, + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = aesbs_cbc_set_key, + .encrypt = aesbs_cbc_encrypt, + .decrypt = aesbs_cbc_decrypt, }, { - .cra_name = "__ctr-aes-neonbs", - .cra_driver_name = "__driver-ctr-aes-neonbs", - .cra_priority = 0, - .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | - CRYPTO_ALG_INTERNAL, - .cra_blocksize = 1, - .cra_ctxsize = sizeof(struct aesbs_ctr_ctx), - .cra_alignmask = 7, - .cra_type = &crypto_blkcipher_type, - .cra_module = THIS_MODULE, - .cra_blkcipher = { - .min_keysize = AES_MIN_KEY_SIZE, - .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, - .setkey = aesbs_ctr_set_key, - .encrypt = aesbs_ctr_encrypt, - .decrypt = aesbs_ctr_encrypt, + .base = { + .cra_name = "__ctr(aes)", + .cra_driver_name = "__ctr-aes-neonbs", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_INTERNAL, + .cra_blocksize = 1, + .cra_ctxsize = sizeof(struct aesbs_ctr_ctx), + .cra_alignmask = 7, + .cra_module = THIS_MODULE, }, + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .chunksize = AES_BLOCK_SIZE, + .setkey = aesbs_ctr_set_key, + .encrypt = aesbs_ctr_encrypt, + .decrypt = aesbs_ctr_encrypt, }, { - .cra_name = "__xts-aes-neonbs", - .cra_driver_name = "__driver-xts-aes-neonbs", - .cra_priority = 0, - .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | - CRYPTO_ALG_INTERNAL, - .cra_blocksize = AES_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct aesbs_xts_ctx), - .cra_alignmask = 7, - .cra_type = &crypto_blkcipher_type, - .cra_module = THIS_MODULE, - .cra_blkcipher = { - .min_keysize = 2 * AES_MIN_KEY_SIZE, - .max_keysize = 2 * AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, - .setkey = aesbs_xts_set_key, - .encrypt = aesbs_xts_encrypt, - .decrypt = aesbs_xts_decrypt, + .base = { + .cra_name = "__xts(aes)", + .cra_driver_name = "__xts-aes-neonbs", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_INTERNAL, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct aesbs_xts_ctx), + .cra_alignmask = 7, + .cra_module = THIS_MODULE, }, -}, { - .cra_name = "cbc(aes)", - .cra_driver_name = "cbc-aes-neonbs", - .cra_priority = 300, - .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, - .cra_blocksize = AES_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct async_helper_ctx), - .cra_alignmask = 7, - .cra_type = &crypto_ablkcipher_type, - .cra_module = THIS_MODULE, - .cra_init = ablk_init, - .cra_exit = ablk_exit, - .cra_ablkcipher = { - .min_keysize = AES_MIN_KEY_SIZE, - .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, - .setkey = ablk_set_key, - .encrypt = __ablk_encrypt, - .decrypt = ablk_decrypt, - } -}, { - .cra_name = "ctr(aes)", - .cra_driver_name = "ctr-aes-neonbs", - .cra_priority = 300, - .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, - .cra_blocksize = 1, - .cra_ctxsize = sizeof(struct async_helper_ctx), - .cra_alignmask = 7, - .cra_type = &crypto_ablkcipher_type, - .cra_module = THIS_MODULE, - .cra_init = ablk_init, - .cra_exit = ablk_exit, - .cra_ablkcipher = { - .min_keysize = AES_MIN_KEY_SIZE, - .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, - .setkey = ablk_set_key, - .encrypt = ablk_encrypt, - .decrypt = ablk_decrypt, - } -}, { - .cra_name = "xts(aes)", - .cra_driver_name = "xts-aes-neonbs", - .cra_priority = 300, - .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, - .cra_blocksize = AES_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct async_helper_ctx), - .cra_alignmask = 7, - .cra_type = &crypto_ablkcipher_type, - .cra_module = THIS_MODULE, - .cra_init = ablk_init, - .cra_exit = ablk_exit, - .cra_ablkcipher = { - .min_keysize = 2 * AES_MIN_KEY_SIZE, - .max_keysize = 2 * AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, - .setkey = ablk_set_key, - .encrypt = ablk_encrypt, - .decrypt = ablk_decrypt, - } + .min_keysize = 2 * AES_MIN_KEY_SIZE, + .max_keysize = 2 * AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = aesbs_xts_set_key, + .encrypt = aesbs_xts_encrypt, + .decrypt = aesbs_xts_decrypt, } }; +struct simd_skcipher_alg *aesbs_simd_algs[ARRAY_SIZE(aesbs_algs)]; + +static void aesbs_mod_exit(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(aesbs_simd_algs) && aesbs_simd_algs[i]; i++) + simd_skcipher_free(aesbs_simd_algs[i]); + + crypto_unregister_skciphers(aesbs_algs, ARRAY_SIZE(aesbs_algs)); +} + static int __init aesbs_mod_init(void) { + struct simd_skcipher_alg *simd; + const char *basename; + const char *algname; + const char *drvname; + int err; + int i; + if (!cpu_has_neon()) return -ENODEV; - return crypto_register_algs(aesbs_algs, ARRAY_SIZE(aesbs_algs)); -} + err = crypto_register_skciphers(aesbs_algs, ARRAY_SIZE(aesbs_algs)); + if (err) + return err; -static void __exit aesbs_mod_exit(void) -{ - crypto_unregister_algs(aesbs_algs, ARRAY_SIZE(aesbs_algs)); + for (i = 0; i < ARRAY_SIZE(aesbs_algs); i++) { + algname = aesbs_algs[i].base.cra_name + 2; + drvname = aesbs_algs[i].base.cra_driver_name + 2; + basename = aesbs_algs[i].base.cra_driver_name; + simd = simd_skcipher_create_compat(algname, drvname, basename); + err = PTR_ERR(simd); + if (IS_ERR(simd)) + goto unregister_simds; + + aesbs_simd_algs[i] = simd; + } + + return 0; + +unregister_simds: + aesbs_mod_exit(); + return err; } module_init(aesbs_mod_init); diff --git a/arch/arm/crypto/crc32-ce-core.S b/arch/arm/crypto/crc32-ce-core.S new file mode 100644 index 000000000000..e63d400dc5c1 --- /dev/null +++ b/arch/arm/crypto/crc32-ce-core.S @@ -0,0 +1,306 @@ +/* + * Accelerated CRC32(C) using ARM CRC, NEON and Crypto Extensions instructions + * + * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* GPL HEADER START + * + * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 only, + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License version 2 for more details (a copy is included + * in the LICENSE file that accompanied this code). + * + * You should have received a copy of the GNU General Public License + * version 2 along with this program; If not, see http://www.gnu.org/licenses + * + * Please visit http://www.xyratex.com/contact if you need additional + * information or have any questions. + * + * GPL HEADER END + */ + +/* + * Copyright 2012 Xyratex Technology Limited + * + * Using hardware provided PCLMULQDQ instruction to accelerate the CRC32 + * calculation. + * CRC32 polynomial:0x04c11db7(BE)/0xEDB88320(LE) + * PCLMULQDQ is a new instruction in Intel SSE4.2, the reference can be found + * at: + * http://www.intel.com/products/processor/manuals/ + * Intel(R) 64 and IA-32 Architectures Software Developer's Manual + * Volume 2B: Instruction Set Reference, N-Z + * + * Authors: Gregory Prestas <Gregory_Prestas@us.xyratex.com> + * Alexander Boyko <Alexander_Boyko@xyratex.com> + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + + .text + .align 6 + .arch armv8-a + .arch_extension crc + .fpu crypto-neon-fp-armv8 + +.Lcrc32_constants: + /* + * [x4*128+32 mod P(x) << 32)]' << 1 = 0x154442bd4 + * #define CONSTANT_R1 0x154442bd4LL + * + * [(x4*128-32 mod P(x) << 32)]' << 1 = 0x1c6e41596 + * #define CONSTANT_R2 0x1c6e41596LL + */ + .quad 0x0000000154442bd4 + .quad 0x00000001c6e41596 + + /* + * [(x128+32 mod P(x) << 32)]' << 1 = 0x1751997d0 + * #define CONSTANT_R3 0x1751997d0LL + * + * [(x128-32 mod P(x) << 32)]' << 1 = 0x0ccaa009e + * #define CONSTANT_R4 0x0ccaa009eLL + */ + .quad 0x00000001751997d0 + .quad 0x00000000ccaa009e + + /* + * [(x64 mod P(x) << 32)]' << 1 = 0x163cd6124 + * #define CONSTANT_R5 0x163cd6124LL + */ + .quad 0x0000000163cd6124 + .quad 0x00000000FFFFFFFF + + /* + * #define CRCPOLY_TRUE_LE_FULL 0x1DB710641LL + * + * Barrett Reduction constant (u64`) = u` = (x**64 / P(x))` + * = 0x1F7011641LL + * #define CONSTANT_RU 0x1F7011641LL + */ + .quad 0x00000001DB710641 + .quad 0x00000001F7011641 + +.Lcrc32c_constants: + .quad 0x00000000740eef02 + .quad 0x000000009e4addf8 + .quad 0x00000000f20c0dfe + .quad 0x000000014cd00bd6 + .quad 0x00000000dd45aab8 + .quad 0x00000000FFFFFFFF + .quad 0x0000000105ec76f0 + .quad 0x00000000dea713f1 + + dCONSTANTl .req d0 + dCONSTANTh .req d1 + qCONSTANT .req q0 + + BUF .req r0 + LEN .req r1 + CRC .req r2 + + qzr .req q9 + + /** + * Calculate crc32 + * BUF - buffer + * LEN - sizeof buffer (multiple of 16 bytes), LEN should be > 63 + * CRC - initial crc32 + * return %eax crc32 + * uint crc32_pmull_le(unsigned char const *buffer, + * size_t len, uint crc32) + */ +ENTRY(crc32_pmull_le) + adr r3, .Lcrc32_constants + b 0f + +ENTRY(crc32c_pmull_le) + adr r3, .Lcrc32c_constants + +0: bic LEN, LEN, #15 + vld1.8 {q1-q2}, [BUF, :128]! + vld1.8 {q3-q4}, [BUF, :128]! + vmov.i8 qzr, #0 + vmov.i8 qCONSTANT, #0 + vmov dCONSTANTl[0], CRC + veor.8 d2, d2, dCONSTANTl + sub LEN, LEN, #0x40 + cmp LEN, #0x40 + blt less_64 + + vld1.64 {qCONSTANT}, [r3] + +loop_64: /* 64 bytes Full cache line folding */ + sub LEN, LEN, #0x40 + + vmull.p64 q5, d3, dCONSTANTh + vmull.p64 q6, d5, dCONSTANTh + vmull.p64 q7, d7, dCONSTANTh + vmull.p64 q8, d9, dCONSTANTh + + vmull.p64 q1, d2, dCONSTANTl + vmull.p64 q2, d4, dCONSTANTl + vmull.p64 q3, d6, dCONSTANTl + vmull.p64 q4, d8, dCONSTANTl + + veor.8 q1, q1, q5 + vld1.8 {q5}, [BUF, :128]! + veor.8 q2, q2, q6 + vld1.8 {q6}, [BUF, :128]! + veor.8 q3, q3, q7 + vld1.8 {q7}, [BUF, :128]! + veor.8 q4, q4, q8 + vld1.8 {q8}, [BUF, :128]! + + veor.8 q1, q1, q5 + veor.8 q2, q2, q6 + veor.8 q3, q3, q7 + veor.8 q4, q4, q8 + + cmp LEN, #0x40 + bge loop_64 + +less_64: /* Folding cache line into 128bit */ + vldr dCONSTANTl, [r3, #16] + vldr dCONSTANTh, [r3, #24] + + vmull.p64 q5, d3, dCONSTANTh + vmull.p64 q1, d2, dCONSTANTl + veor.8 q1, q1, q5 + veor.8 q1, q1, q2 + + vmull.p64 q5, d3, dCONSTANTh + vmull.p64 q1, d2, dCONSTANTl + veor.8 q1, q1, q5 + veor.8 q1, q1, q3 + + vmull.p64 q5, d3, dCONSTANTh + vmull.p64 q1, d2, dCONSTANTl + veor.8 q1, q1, q5 + veor.8 q1, q1, q4 + + teq LEN, #0 + beq fold_64 + +loop_16: /* Folding rest buffer into 128bit */ + subs LEN, LEN, #0x10 + + vld1.8 {q2}, [BUF, :128]! + vmull.p64 q5, d3, dCONSTANTh + vmull.p64 q1, d2, dCONSTANTl + veor.8 q1, q1, q5 + veor.8 q1, q1, q2 + + bne loop_16 + +fold_64: + /* perform the last 64 bit fold, also adds 32 zeroes + * to the input stream */ + vmull.p64 q2, d2, dCONSTANTh + vext.8 q1, q1, qzr, #8 + veor.8 q1, q1, q2 + + /* final 32-bit fold */ + vldr dCONSTANTl, [r3, #32] + vldr d6, [r3, #40] + vmov.i8 d7, #0 + + vext.8 q2, q1, qzr, #4 + vand.8 d2, d2, d6 + vmull.p64 q1, d2, dCONSTANTl + veor.8 q1, q1, q2 + + /* Finish up with the bit-reversed barrett reduction 64 ==> 32 bits */ + vldr dCONSTANTl, [r3, #48] + vldr dCONSTANTh, [r3, #56] + + vand.8 q2, q1, q3 + vext.8 q2, qzr, q2, #8 + vmull.p64 q2, d5, dCONSTANTh + vand.8 q2, q2, q3 + vmull.p64 q2, d4, dCONSTANTl + veor.8 q1, q1, q2 + vmov r0, s5 + + bx lr +ENDPROC(crc32_pmull_le) +ENDPROC(crc32c_pmull_le) + + .macro __crc32, c + subs ip, r2, #8 + bmi .Ltail\c + + tst r1, #3 + bne .Lunaligned\c + + teq ip, #0 +.Laligned8\c: + ldrd r2, r3, [r1], #8 +ARM_BE8(rev r2, r2 ) +ARM_BE8(rev r3, r3 ) + crc32\c\()w r0, r0, r2 + crc32\c\()w r0, r0, r3 + bxeq lr + subs ip, ip, #8 + bpl .Laligned8\c + +.Ltail\c: + tst ip, #4 + beq 2f + ldr r3, [r1], #4 +ARM_BE8(rev r3, r3 ) + crc32\c\()w r0, r0, r3 + +2: tst ip, #2 + beq 1f + ldrh r3, [r1], #2 +ARM_BE8(rev16 r3, r3 ) + crc32\c\()h r0, r0, r3 + +1: tst ip, #1 + bxeq lr + ldrb r3, [r1] + crc32\c\()b r0, r0, r3 + bx lr + +.Lunaligned\c: + tst r1, #1 + beq 2f + ldrb r3, [r1], #1 + subs r2, r2, #1 + crc32\c\()b r0, r0, r3 + + tst r1, #2 + beq 0f +2: ldrh r3, [r1], #2 + subs r2, r2, #2 +ARM_BE8(rev16 r3, r3 ) + crc32\c\()h r0, r0, r3 + +0: subs ip, r2, #8 + bpl .Laligned8\c + b .Ltail\c + .endm + + .align 5 +ENTRY(crc32_armv8_le) + __crc32 +ENDPROC(crc32_armv8_le) + + .align 5 +ENTRY(crc32c_armv8_le) + __crc32 c +ENDPROC(crc32c_armv8_le) diff --git a/arch/arm/crypto/crc32-ce-glue.c b/arch/arm/crypto/crc32-ce-glue.c new file mode 100644 index 000000000000..e1566bec1016 --- /dev/null +++ b/arch/arm/crypto/crc32-ce-glue.c @@ -0,0 +1,242 @@ +/* + * Accelerated CRC32(C) using ARM CRC, NEON and Crypto Extensions instructions + * + * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/crc32.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> + +#include <crypto/internal/hash.h> + +#include <asm/hwcap.h> +#include <asm/neon.h> +#include <asm/simd.h> +#include <asm/unaligned.h> + +#define PMULL_MIN_LEN 64L /* minimum size of buffer + * for crc32_pmull_le_16 */ +#define SCALE_F 16L /* size of NEON register */ + +asmlinkage u32 crc32_pmull_le(const u8 buf[], u32 len, u32 init_crc); +asmlinkage u32 crc32_armv8_le(u32 init_crc, const u8 buf[], u32 len); + +asmlinkage u32 crc32c_pmull_le(const u8 buf[], u32 len, u32 init_crc); +asmlinkage u32 crc32c_armv8_le(u32 init_crc, const u8 buf[], u32 len); + +static u32 (*fallback_crc32)(u32 init_crc, const u8 buf[], u32 len); +static u32 (*fallback_crc32c)(u32 init_crc, const u8 buf[], u32 len); + +static int crc32_cra_init(struct crypto_tfm *tfm) +{ + u32 *key = crypto_tfm_ctx(tfm); + + *key = 0; + return 0; +} + +static int crc32c_cra_init(struct crypto_tfm *tfm) +{ + u32 *key = crypto_tfm_ctx(tfm); + + *key = ~0; + return 0; +} + +static int crc32_setkey(struct crypto_shash *hash, const u8 *key, + unsigned int keylen) +{ + u32 *mctx = crypto_shash_ctx(hash); + + if (keylen != sizeof(u32)) { + crypto_shash_set_flags(hash, CRYPTO_TFM_RES_BAD_KEY_LEN); + return -EINVAL; + } + *mctx = le32_to_cpup((__le32 *)key); + return 0; +} + +static int crc32_init(struct shash_desc *desc) +{ + u32 *mctx = crypto_shash_ctx(desc->tfm); + u32 *crc = shash_desc_ctx(desc); + + *crc = *mctx; + return 0; +} + +static int crc32_update(struct shash_desc *desc, const u8 *data, + unsigned int length) +{ + u32 *crc = shash_desc_ctx(desc); + + *crc = crc32_armv8_le(*crc, data, length); + return 0; +} + +static int crc32c_update(struct shash_desc *desc, const u8 *data, + unsigned int length) +{ + u32 *crc = shash_desc_ctx(desc); + + *crc = crc32c_armv8_le(*crc, data, length); + return 0; +} + +static int crc32_final(struct shash_desc *desc, u8 *out) +{ + u32 *crc = shash_desc_ctx(desc); + + put_unaligned_le32(*crc, out); + return 0; +} + +static int crc32c_final(struct shash_desc *desc, u8 *out) +{ + u32 *crc = shash_desc_ctx(desc); + + put_unaligned_le32(~*crc, out); + return 0; +} + +static int crc32_pmull_update(struct shash_desc *desc, const u8 *data, + unsigned int length) +{ + u32 *crc = shash_desc_ctx(desc); + unsigned int l; + + if (may_use_simd()) { + if ((u32)data % SCALE_F) { + l = min_t(u32, length, SCALE_F - ((u32)data % SCALE_F)); + + *crc = fallback_crc32(*crc, data, l); + + data += l; + length -= l; + } + + if (length >= PMULL_MIN_LEN) { + l = round_down(length, SCALE_F); + + kernel_neon_begin(); + *crc = crc32_pmull_le(data, l, *crc); + kernel_neon_end(); + + data += l; + length -= l; + } + } + + if (length > 0) + *crc = fallback_crc32(*crc, data, length); + + return 0; +} + +static int crc32c_pmull_update(struct shash_desc *desc, const u8 *data, + unsigned int length) +{ + u32 *crc = shash_desc_ctx(desc); + unsigned int l; + + if (may_use_simd()) { + if ((u32)data % SCALE_F) { + l = min_t(u32, length, SCALE_F - ((u32)data % SCALE_F)); + + *crc = fallback_crc32c(*crc, data, l); + + data += l; + length -= l; + } + + if (length >= PMULL_MIN_LEN) { + l = round_down(length, SCALE_F); + + kernel_neon_begin(); + *crc = crc32c_pmull_le(data, l, *crc); + kernel_neon_end(); + + data += l; + length -= l; + } + } + + if (length > 0) + *crc = fallback_crc32c(*crc, data, length); + + return 0; +} + +static struct shash_alg crc32_pmull_algs[] = { { + .setkey = crc32_setkey, + .init = crc32_init, + .update = crc32_update, + .final = crc32_final, + .descsize = sizeof(u32), + .digestsize = sizeof(u32), + + .base.cra_ctxsize = sizeof(u32), + .base.cra_init = crc32_cra_init, + .base.cra_name = "crc32", + .base.cra_driver_name = "crc32-arm-ce", + .base.cra_priority = 200, + .base.cra_blocksize = 1, + .base.cra_module = THIS_MODULE, +}, { + .setkey = crc32_setkey, + .init = crc32_init, + .update = crc32c_update, + .final = crc32c_final, + .descsize = sizeof(u32), + .digestsize = sizeof(u32), + + .base.cra_ctxsize = sizeof(u32), + .base.cra_init = crc32c_cra_init, + .base.cra_name = "crc32c", + .base.cra_driver_name = "crc32c-arm-ce", + .base.cra_priority = 200, + .base.cra_blocksize = 1, + .base.cra_module = THIS_MODULE, +} }; + +static int __init crc32_pmull_mod_init(void) +{ + if (elf_hwcap2 & HWCAP2_PMULL) { + crc32_pmull_algs[0].update = crc32_pmull_update; + crc32_pmull_algs[1].update = crc32c_pmull_update; + + if (elf_hwcap2 & HWCAP2_CRC32) { + fallback_crc32 = crc32_armv8_le; + fallback_crc32c = crc32c_armv8_le; + } else { + fallback_crc32 = crc32_le; + fallback_crc32c = __crc32c_le; + } + } else if (!(elf_hwcap2 & HWCAP2_CRC32)) { + return -ENODEV; + } + + return crypto_register_shashes(crc32_pmull_algs, + ARRAY_SIZE(crc32_pmull_algs)); +} + +static void __exit crc32_pmull_mod_exit(void) +{ + crypto_unregister_shashes(crc32_pmull_algs, + ARRAY_SIZE(crc32_pmull_algs)); +} + +module_init(crc32_pmull_mod_init); +module_exit(crc32_pmull_mod_exit); + +MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_CRYPTO("crc32"); +MODULE_ALIAS_CRYPTO("crc32c"); diff --git a/arch/arm/crypto/crct10dif-ce-core.S b/arch/arm/crypto/crct10dif-ce-core.S new file mode 100644 index 000000000000..ce45ba0c0687 --- /dev/null +++ b/arch/arm/crypto/crct10dif-ce-core.S @@ -0,0 +1,427 @@ +// +// Accelerated CRC-T10DIF using ARM NEON and Crypto Extensions instructions +// +// Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org> +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License version 2 as +// published by the Free Software Foundation. +// + +// +// Implement fast CRC-T10DIF computation with SSE and PCLMULQDQ instructions +// +// Copyright (c) 2013, Intel Corporation +// +// Authors: +// Erdinc Ozturk <erdinc.ozturk@intel.com> +// Vinodh Gopal <vinodh.gopal@intel.com> +// James Guilford <james.guilford@intel.com> +// Tim Chen <tim.c.chen@linux.intel.com> +// +// This software is available to you under a choice of one of two +// licenses. You may choose to be licensed under the terms of the GNU +// General Public License (GPL) Version 2, available from the file +// COPYING in the main directory of this source tree, or the +// OpenIB.org BSD license below: +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are +// met: +// +// * Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// * Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// * Neither the name of the Intel Corporation nor the names of its +// contributors may be used to endorse or promote products derived from +// this software without specific prior written permission. +// +// +// THIS SOFTWARE IS PROVIDED BY INTEL CORPORATION ""AS IS"" AND ANY +// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL CORPORATION OR +// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING +// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// Function API: +// UINT16 crc_t10dif_pcl( +// UINT16 init_crc, //initial CRC value, 16 bits +// const unsigned char *buf, //buffer pointer to calculate CRC on +// UINT64 len //buffer length in bytes (64-bit data) +// ); +// +// Reference paper titled "Fast CRC Computation for Generic +// Polynomials Using PCLMULQDQ Instruction" +// URL: http://www.intel.com/content/dam/www/public/us/en/documents +// /white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf +// +// + +#include <linux/linkage.h> +#include <asm/assembler.h> + +#ifdef CONFIG_CPU_ENDIAN_BE8 +#define CPU_LE(code...) +#else +#define CPU_LE(code...) code +#endif + + .text + .fpu crypto-neon-fp-armv8 + + arg1_low32 .req r0 + arg2 .req r1 + arg3 .req r2 + + qzr .req q13 + + q0l .req d0 + q0h .req d1 + q1l .req d2 + q1h .req d3 + q2l .req d4 + q2h .req d5 + q3l .req d6 + q3h .req d7 + q4l .req d8 + q4h .req d9 + q5l .req d10 + q5h .req d11 + q6l .req d12 + q6h .req d13 + q7l .req d14 + q7h .req d15 + +ENTRY(crc_t10dif_pmull) + vmov.i8 qzr, #0 // init zero register + + // adjust the 16-bit initial_crc value, scale it to 32 bits + lsl arg1_low32, arg1_low32, #16 + + // check if smaller than 256 + cmp arg3, #256 + + // for sizes less than 128, we can't fold 64B at a time... + blt _less_than_128 + + // load the initial crc value + // crc value does not need to be byte-reflected, but it needs + // to be moved to the high part of the register. + // because data will be byte-reflected and will align with + // initial crc at correct place. + vmov s0, arg1_low32 // initial crc + vext.8 q10, qzr, q0, #4 + + // receive the initial 64B data, xor the initial crc value + vld1.64 {q0-q1}, [arg2, :128]! + vld1.64 {q2-q3}, [arg2, :128]! + vld1.64 {q4-q5}, [arg2, :128]! + vld1.64 {q6-q7}, [arg2, :128]! +CPU_LE( vrev64.8 q0, q0 ) +CPU_LE( vrev64.8 q1, q1 ) +CPU_LE( vrev64.8 q2, q2 ) +CPU_LE( vrev64.8 q3, q3 ) +CPU_LE( vrev64.8 q4, q4 ) +CPU_LE( vrev64.8 q5, q5 ) +CPU_LE( vrev64.8 q6, q6 ) +CPU_LE( vrev64.8 q7, q7 ) + + vswp d0, d1 + vswp d2, d3 + vswp d4, d5 + vswp d6, d7 + vswp d8, d9 + vswp d10, d11 + vswp d12, d13 + vswp d14, d15 + + // XOR the initial_crc value + veor.8 q0, q0, q10 + + adr ip, rk3 + vld1.64 {q10}, [ip, :128] // xmm10 has rk3 and rk4 + + // + // we subtract 256 instead of 128 to save one instruction from the loop + // + sub arg3, arg3, #256 + + // at this section of the code, there is 64*x+y (0<=y<64) bytes of + // buffer. The _fold_64_B_loop will fold 64B at a time + // until we have 64+y Bytes of buffer + + + // fold 64B at a time. This section of the code folds 4 vector + // registers in parallel +_fold_64_B_loop: + + .macro fold64, reg1, reg2 + vld1.64 {q11-q12}, [arg2, :128]! + + vmull.p64 q8, \reg1\()h, d21 + vmull.p64 \reg1, \reg1\()l, d20 + vmull.p64 q9, \reg2\()h, d21 + vmull.p64 \reg2, \reg2\()l, d20 + +CPU_LE( vrev64.8 q11, q11 ) +CPU_LE( vrev64.8 q12, q12 ) + vswp d22, d23 + vswp d24, d25 + + veor.8 \reg1, \reg1, q8 + veor.8 \reg2, \reg2, q9 + veor.8 \reg1, \reg1, q11 + veor.8 \reg2, \reg2, q12 + .endm + + fold64 q0, q1 + fold64 q2, q3 + fold64 q4, q5 + fold64 q6, q7 + + subs arg3, arg3, #128 + + // check if there is another 64B in the buffer to be able to fold + bge _fold_64_B_loop + + // at this point, the buffer pointer is pointing at the last y Bytes + // of the buffer the 64B of folded data is in 4 of the vector + // registers: v0, v1, v2, v3 + + // fold the 8 vector registers to 1 vector register with different + // constants + + adr ip, rk9 + vld1.64 {q10}, [ip, :128]! + + .macro fold16, reg, rk + vmull.p64 q8, \reg\()l, d20 + vmull.p64 \reg, \reg\()h, d21 + .ifnb \rk + vld1.64 {q10}, [ip, :128]! + .endif + veor.8 q7, q7, q8 + veor.8 q7, q7, \reg + .endm + + fold16 q0, rk11 + fold16 q1, rk13 + fold16 q2, rk15 + fold16 q3, rk17 + fold16 q4, rk19 + fold16 q5, rk1 + fold16 q6 + + // instead of 64, we add 48 to the loop counter to save 1 instruction + // from the loop instead of a cmp instruction, we use the negative + // flag with the jl instruction + adds arg3, arg3, #(128-16) + blt _final_reduction_for_128 + + // now we have 16+y bytes left to reduce. 16 Bytes is in register v7 + // and the rest is in memory. We can fold 16 bytes at a time if y>=16 + // continue folding 16B at a time + +_16B_reduction_loop: + vmull.p64 q8, d14, d20 + vmull.p64 q7, d15, d21 + veor.8 q7, q7, q8 + + vld1.64 {q0}, [arg2, :128]! +CPU_LE( vrev64.8 q0, q0 ) + vswp d0, d1 + veor.8 q7, q7, q0 + subs arg3, arg3, #16 + + // instead of a cmp instruction, we utilize the flags with the + // jge instruction equivalent of: cmp arg3, 16-16 + // check if there is any more 16B in the buffer to be able to fold + bge _16B_reduction_loop + + // now we have 16+z bytes left to reduce, where 0<= z < 16. + // first, we reduce the data in the xmm7 register + +_final_reduction_for_128: + // check if any more data to fold. If not, compute the CRC of + // the final 128 bits + adds arg3, arg3, #16 + beq _128_done + + // here we are getting data that is less than 16 bytes. + // since we know that there was data before the pointer, we can + // offset the input pointer before the actual point, to receive + // exactly 16 bytes. after that the registers need to be adjusted. +_get_last_two_regs: + add arg2, arg2, arg3 + sub arg2, arg2, #16 + vld1.64 {q1}, [arg2] +CPU_LE( vrev64.8 q1, q1 ) + vswp d2, d3 + + // get rid of the extra data that was loaded before + // load the shift constant + adr ip, tbl_shf_table + 16 + sub ip, ip, arg3 + vld1.8 {q0}, [ip] + + // shift v2 to the left by arg3 bytes + vtbl.8 d4, {d14-d15}, d0 + vtbl.8 d5, {d14-d15}, d1 + + // shift v7 to the right by 16-arg3 bytes + vmov.i8 q9, #0x80 + veor.8 q0, q0, q9 + vtbl.8 d18, {d14-d15}, d0 + vtbl.8 d19, {d14-d15}, d1 + + // blend + vshr.s8 q0, q0, #7 // convert to 8-bit mask + vbsl.8 q0, q2, q1 + + // fold 16 Bytes + vmull.p64 q8, d18, d20 + vmull.p64 q7, d19, d21 + veor.8 q7, q7, q8 + veor.8 q7, q7, q0 + +_128_done: + // compute crc of a 128-bit value + vldr d20, rk5 + vldr d21, rk6 // rk5 and rk6 in xmm10 + + // 64b fold + vext.8 q0, qzr, q7, #8 + vmull.p64 q7, d15, d20 + veor.8 q7, q7, q0 + + // 32b fold + vext.8 q0, q7, qzr, #12 + vmov s31, s3 + vmull.p64 q0, d0, d21 + veor.8 q7, q0, q7 + + // barrett reduction +_barrett: + vldr d20, rk7 + vldr d21, rk8 + + vmull.p64 q0, d15, d20 + vext.8 q0, qzr, q0, #12 + vmull.p64 q0, d1, d21 + vext.8 q0, qzr, q0, #12 + veor.8 q7, q7, q0 + vmov r0, s29 + +_cleanup: + // scale the result back to 16 bits + lsr r0, r0, #16 + bx lr + +_less_than_128: + teq arg3, #0 + beq _cleanup + + vmov.i8 q0, #0 + vmov s3, arg1_low32 // get the initial crc value + + vld1.64 {q7}, [arg2, :128]! +CPU_LE( vrev64.8 q7, q7 ) + vswp d14, d15 + veor.8 q7, q7, q0 + + cmp arg3, #16 + beq _128_done // exactly 16 left + blt _less_than_16_left + + // now if there is, load the constants + vldr d20, rk1 + vldr d21, rk2 // rk1 and rk2 in xmm10 + + // check if there is enough buffer to be able to fold 16B at a time + subs arg3, arg3, #32 + addlt arg3, arg3, #16 + blt _get_last_two_regs + b _16B_reduction_loop + +_less_than_16_left: + // shl r9, 4 + adr ip, tbl_shf_table + 16 + sub ip, ip, arg3 + vld1.8 {q0}, [ip] + vmov.i8 q9, #0x80 + veor.8 q0, q0, q9 + vtbl.8 d18, {d14-d15}, d0 + vtbl.8 d15, {d14-d15}, d1 + vmov d14, d18 + b _128_done +ENDPROC(crc_t10dif_pmull) + +// precomputed constants +// these constants are precomputed from the poly: +// 0x8bb70000 (0x8bb7 scaled to 32 bits) + .align 4 +// Q = 0x18BB70000 +// rk1 = 2^(32*3) mod Q << 32 +// rk2 = 2^(32*5) mod Q << 32 +// rk3 = 2^(32*15) mod Q << 32 +// rk4 = 2^(32*17) mod Q << 32 +// rk5 = 2^(32*3) mod Q << 32 +// rk6 = 2^(32*2) mod Q << 32 +// rk7 = floor(2^64/Q) +// rk8 = Q + +rk3: .quad 0x9d9d000000000000 +rk4: .quad 0x7cf5000000000000 +rk5: .quad 0x2d56000000000000 +rk6: .quad 0x1368000000000000 +rk7: .quad 0x00000001f65a57f8 +rk8: .quad 0x000000018bb70000 +rk9: .quad 0xceae000000000000 +rk10: .quad 0xbfd6000000000000 +rk11: .quad 0x1e16000000000000 +rk12: .quad 0x713c000000000000 +rk13: .quad 0xf7f9000000000000 +rk14: .quad 0x80a6000000000000 +rk15: .quad 0x044c000000000000 +rk16: .quad 0xe658000000000000 +rk17: .quad 0xad18000000000000 +rk18: .quad 0xa497000000000000 +rk19: .quad 0x6ee3000000000000 +rk20: .quad 0xe7b5000000000000 +rk1: .quad 0x2d56000000000000 +rk2: .quad 0x06df000000000000 + +tbl_shf_table: +// use these values for shift constants for the tbl/tbx instruction +// different alignments result in values as shown: +// DDQ 0x008f8e8d8c8b8a898887868584838281 # shl 15 (16-1) / shr1 +// DDQ 0x01008f8e8d8c8b8a8988878685848382 # shl 14 (16-3) / shr2 +// DDQ 0x0201008f8e8d8c8b8a89888786858483 # shl 13 (16-4) / shr3 +// DDQ 0x030201008f8e8d8c8b8a898887868584 # shl 12 (16-4) / shr4 +// DDQ 0x04030201008f8e8d8c8b8a8988878685 # shl 11 (16-5) / shr5 +// DDQ 0x0504030201008f8e8d8c8b8a89888786 # shl 10 (16-6) / shr6 +// DDQ 0x060504030201008f8e8d8c8b8a898887 # shl 9 (16-7) / shr7 +// DDQ 0x07060504030201008f8e8d8c8b8a8988 # shl 8 (16-8) / shr8 +// DDQ 0x0807060504030201008f8e8d8c8b8a89 # shl 7 (16-9) / shr9 +// DDQ 0x090807060504030201008f8e8d8c8b8a # shl 6 (16-10) / shr10 +// DDQ 0x0a090807060504030201008f8e8d8c8b # shl 5 (16-11) / shr11 +// DDQ 0x0b0a090807060504030201008f8e8d8c # shl 4 (16-12) / shr12 +// DDQ 0x0c0b0a090807060504030201008f8e8d # shl 3 (16-13) / shr13 +// DDQ 0x0d0c0b0a090807060504030201008f8e # shl 2 (16-14) / shr14 +// DDQ 0x0e0d0c0b0a090807060504030201008f # shl 1 (16-15) / shr15 + + .byte 0x0, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87 + .byte 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f + .byte 0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7 + .byte 0x8, 0x9, 0xa, 0xb, 0xc, 0xd, 0xe , 0x0 diff --git a/arch/arm/crypto/crct10dif-ce-glue.c b/arch/arm/crypto/crct10dif-ce-glue.c new file mode 100644 index 000000000000..d428355cf38d --- /dev/null +++ b/arch/arm/crypto/crct10dif-ce-glue.c @@ -0,0 +1,101 @@ +/* + * Accelerated CRC-T10DIF using ARM NEON and Crypto Extensions instructions + * + * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/crc-t10dif.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> + +#include <crypto/internal/hash.h> + +#include <asm/neon.h> +#include <asm/simd.h> + +#define CRC_T10DIF_PMULL_CHUNK_SIZE 16U + +asmlinkage u16 crc_t10dif_pmull(u16 init_crc, const u8 buf[], u32 len); + +static int crct10dif_init(struct shash_desc *desc) +{ + u16 *crc = shash_desc_ctx(desc); + + *crc = 0; + return 0; +} + +static int crct10dif_update(struct shash_desc *desc, const u8 *data, + unsigned int length) +{ + u16 *crc = shash_desc_ctx(desc); + unsigned int l; + + if (!may_use_simd()) { + *crc = crc_t10dif_generic(*crc, data, length); + } else { + if (unlikely((u32)data % CRC_T10DIF_PMULL_CHUNK_SIZE)) { + l = min_t(u32, length, CRC_T10DIF_PMULL_CHUNK_SIZE - + ((u32)data % CRC_T10DIF_PMULL_CHUNK_SIZE)); + + *crc = crc_t10dif_generic(*crc, data, l); + + length -= l; + data += l; + } + if (length > 0) { + kernel_neon_begin(); + *crc = crc_t10dif_pmull(*crc, data, length); + kernel_neon_end(); + } + } + return 0; +} + +static int crct10dif_final(struct shash_desc *desc, u8 *out) +{ + u16 *crc = shash_desc_ctx(desc); + + *(u16 *)out = *crc; + return 0; +} + +static struct shash_alg crc_t10dif_alg = { + .digestsize = CRC_T10DIF_DIGEST_SIZE, + .init = crct10dif_init, + .update = crct10dif_update, + .final = crct10dif_final, + .descsize = CRC_T10DIF_DIGEST_SIZE, + + .base.cra_name = "crct10dif", + .base.cra_driver_name = "crct10dif-arm-ce", + .base.cra_priority = 200, + .base.cra_blocksize = CRC_T10DIF_BLOCK_SIZE, + .base.cra_module = THIS_MODULE, +}; + +static int __init crc_t10dif_mod_init(void) +{ + if (!(elf_hwcap2 & HWCAP2_PMULL)) + return -ENODEV; + + return crypto_register_shash(&crc_t10dif_alg); +} + +static void __exit crc_t10dif_mod_exit(void) +{ + crypto_unregister_shash(&crc_t10dif_alg); +} + +module_init(crc_t10dif_mod_init); +module_exit(crc_t10dif_mod_exit); + +MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_CRYPTO("crct10dif"); diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 0745538b26d3..55e0e3ea9cb6 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -8,7 +8,6 @@ generic-y += early_ioremap.h generic-y += emergency-restart.h generic-y += errno.h generic-y += exec.h -generic-y += export.h generic-y += ioctl.h generic-y += ipcbuf.h generic-y += irq_regs.h diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h index a8088290b778..27475904e096 100644 --- a/arch/arm/include/asm/arch_gicv3.h +++ b/arch/arm/include/asm/arch_gicv3.h @@ -22,6 +22,7 @@ #include <linux/io.h> #include <asm/barrier.h> +#include <asm/cacheflush.h> #include <asm/cp15.h> #define ICC_EOIR1 __ACCESS_CP15(c12, 0, c12, 1) @@ -230,19 +231,14 @@ static inline void gic_write_bpr1(u32 val) * AArch32, since the syndrome register doesn't provide any information for * them. * Consequently, the following IO helpers use 32bit accesses. - * - * There are only two registers that need 64bit accesses in this driver: - * - GICD_IROUTERn, contain the affinity values associated to each interrupt. - * The upper-word (aff3) will always be 0, so there is no need for a lock. - * - GICR_TYPER is an ID register and doesn't need atomicity. */ -static inline void gic_write_irouter(u64 val, volatile void __iomem *addr) +static inline void __gic_writeq_nonatomic(u64 val, volatile void __iomem *addr) { writel_relaxed((u32)val, addr); writel_relaxed((u32)(val >> 32), addr + 4); } -static inline u64 gic_read_typer(const volatile void __iomem *addr) +static inline u64 __gic_readq_nonatomic(const volatile void __iomem *addr) { u64 val; @@ -251,5 +247,49 @@ static inline u64 gic_read_typer(const volatile void __iomem *addr) return val; } +#define gic_flush_dcache_to_poc(a,l) __cpuc_flush_dcache_area((a), (l)) + +/* + * GICD_IROUTERn, contain the affinity values associated to each interrupt. + * The upper-word (aff3) will always be 0, so there is no need for a lock. + */ +#define gic_write_irouter(v, c) __gic_writeq_nonatomic(v, c) + +/* + * GICR_TYPER is an ID register and doesn't need atomicity. + */ +#define gic_read_typer(c) __gic_readq_nonatomic(c) + +/* + * GITS_BASER - hi and lo bits may be accessed independently. + */ +#define gits_read_baser(c) __gic_readq_nonatomic(c) +#define gits_write_baser(v, c) __gic_writeq_nonatomic(v, c) + +/* + * GICR_PENDBASER and GICR_PROPBASE are changed with LPIs disabled, so they + * won't be being used during any updates and can be changed non-atomically + */ +#define gicr_read_propbaser(c) __gic_readq_nonatomic(c) +#define gicr_write_propbaser(v, c) __gic_writeq_nonatomic(v, c) +#define gicr_read_pendbaser(c) __gic_readq_nonatomic(c) +#define gicr_write_pendbaser(v, c) __gic_writeq_nonatomic(v, c) + +/* + * GITS_TYPER is an ID register and doesn't need atomicity. + */ +#define gits_read_typer(c) __gic_readq_nonatomic(c) + +/* + * GITS_CBASER - hi and lo bits may be accessed independently. + */ +#define gits_read_cbaser(c) __gic_readq_nonatomic(c) +#define gits_write_cbaser(v, c) __gic_writeq_nonatomic(v, c) + +/* + * GITS_CWRITER - hi and lo bits may be accessed independently. + */ +#define gits_write_cwriter(v, c) __gic_writeq_nonatomic(v, c) + #endif /* !__ASSEMBLY__ */ #endif /* !__ASM_ARCH_GICV3_H */ diff --git a/arch/arm/include/asm/efi.h b/arch/arm/include/asm/efi.h index 766bf9b78160..0b06f5341b45 100644 --- a/arch/arm/include/asm/efi.h +++ b/arch/arm/include/asm/efi.h @@ -57,6 +57,9 @@ void efi_virtmap_unload(void); #define __efi_call_early(f, ...) f(__VA_ARGS__) #define efi_is_64bit() (false) +#define efi_call_proto(protocol, f, instance, ...) \ + ((protocol##_t *)instance)->f(instance, ##__VA_ARGS__) + struct screen_info *alloc_screen_info(efi_system_table_t *sys_table_arg); void free_screen_info(efi_system_table_t *sys_table, struct screen_info *si); diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 021692c64de3..42871fb8340e 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -25,7 +25,6 @@ #include <linux/string.h> #include <linux/types.h> -#include <linux/blk_types.h> #include <asm/byteorder.h> #include <asm/memory.h> #include <asm-generic/pci_iomap.h> diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index d7ea6bcb29bf..8ef05381984b 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -66,6 +66,7 @@ extern char __kvm_hyp_vector[]; extern void __kvm_flush_vm_context(void); extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); extern void __kvm_tlb_flush_vmid(struct kvm *kvm); +extern void __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu); extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 2d19e02d03fd..d5423ab15ed5 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -57,6 +57,9 @@ struct kvm_arch { /* VTTBR value associated with below pgd and vmid */ u64 vttbr; + /* The last vcpu id that ran on each physical CPU */ + int __percpu *last_vcpu_ran; + /* Timer */ struct arch_timer_kvm timer; diff --git a/arch/arm/include/asm/kvm_hyp.h b/arch/arm/include/asm/kvm_hyp.h index 343135ede5fa..58508900c4bb 100644 --- a/arch/arm/include/asm/kvm_hyp.h +++ b/arch/arm/include/asm/kvm_hyp.h @@ -71,6 +71,7 @@ #define ICIALLUIS __ACCESS_CP15(c7, 0, c1, 0) #define ATS1CPR __ACCESS_CP15(c7, 0, c8, 0) #define TLBIALLIS __ACCESS_CP15(c8, 0, c3, 0) +#define TLBIALL __ACCESS_CP15(c8, 0, c7, 0) #define TLBIALLNSNHIS __ACCESS_CP15(c8, 4, c3, 4) #define PRRR __ACCESS_CP15(c10, 0, c2, 0) #define NMRR __ACCESS_CP15(c10, 0, c2, 1) diff --git a/arch/arm/include/asm/mutex.h b/arch/arm/include/asm/mutex.h deleted file mode 100644 index 87c044910fe0..000000000000 --- a/arch/arm/include/asm/mutex.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/include/asm/mutex.h - * - * ARM optimized mutex locking primitives - * - * Please look into asm-generic/mutex-xchg.h for a formal definition. - */ -#ifndef _ASM_MUTEX_H -#define _ASM_MUTEX_H -/* - * On pre-ARMv6 hardware this results in a swp-based implementation, - * which is the most efficient. For ARMv6+, we have exclusive memory - * accessors and use atomic_dec to avoid the extra xchg operations - * on the locking slowpaths. - */ -#if __LINUX_ARM_ARCH__ < 6 -#include <asm-generic/mutex-xchg.h> -#else -#include <asm-generic/mutex-dec.h> -#endif -#endif /* _ASM_MUTEX_H */ diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index 8a1e8e995dae..c3d5fc124a05 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -82,8 +82,6 @@ unsigned long get_wchan(struct task_struct *p); #define cpu_relax() barrier() #endif -#define cpu_relax_lowlatency() cpu_relax() - #define task_pt_regs(p) \ ((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1) diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 1e25cd80589e..3f2eb76243e3 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -186,6 +186,8 @@ tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr) tlb_add_flush(tlb, addr); } +#define tlb_remove_huge_tlb_entry(h, tlb, ptep, address) \ + tlb_remove_tlb_entry(tlb, ptep, address) /* * In the case of tlb vma handling, we can optimise these away in the * case where we're doing a full MM flush. When we're doing a munmap, @@ -211,18 +213,17 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) static inline bool __tlb_remove_page(struct mmu_gather *tlb, struct page *page) { + tlb->pages[tlb->nr++] = page; + VM_WARN_ON(tlb->nr > tlb->max); if (tlb->nr == tlb->max) return true; - tlb->pages[tlb->nr++] = page; return false; } static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) { - if (__tlb_remove_page(tlb, page)) { + if (__tlb_remove_page(tlb, page)) tlb_flush_mmu(tlb); - __tlb_remove_page(tlb, page); - } } static inline bool __tlb_remove_page_size(struct mmu_gather *tlb, @@ -231,12 +232,6 @@ static inline bool __tlb_remove_page_size(struct mmu_gather *tlb, return __tlb_remove_page(tlb, page); } -static inline bool __tlb_remove_pte_page(struct mmu_gather *tlb, - struct page *page) -{ - return __tlb_remove_page(tlb, page); -} - static inline void tlb_remove_page_size(struct mmu_gather *tlb, struct page *page, int page_size) { @@ -284,5 +279,11 @@ tlb_remove_pmd_tlb_entry(struct mmu_gather *tlb, pmd_t *pmdp, unsigned long addr #define tlb_migrate_finish(mm) do { } while (0) +#define tlb_remove_check_page_size_change tlb_remove_check_page_size_change +static inline void tlb_remove_check_page_size_change(struct mmu_gather *tlb, + unsigned int page_size) +{ +} + #endif /* CONFIG_MMU */ #endif diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 194b69923389..ada0d29a660f 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -19,7 +19,7 @@ * This may need to be greater than __NR_last_syscall+1 in order to * account for the padding in the syscall table */ -#define __NR_syscalls (396) +#define __NR_syscalls (400) #define __ARCH_WANT_STAT64 #define __ARCH_WANT_SYS_GETHOSTNAME diff --git a/arch/arm/include/asm/xen/hypercall.h b/arch/arm/include/asm/xen/hypercall.h index 9d874db13c0e..3522cbaed316 100644 --- a/arch/arm/include/asm/xen/hypercall.h +++ b/arch/arm/include/asm/xen/hypercall.h @@ -1,87 +1 @@ -/****************************************************************************** - * hypercall.h - * - * Linux-specific hypervisor handling. - * - * Stefano Stabellini <stefano.stabellini@eu.citrix.com>, Citrix, 2012 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation; or, when distributed - * separately from the Linux kernel or incorporated into other - * software packages, subject to the following license: - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this source file (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, copy, modify, - * merge, publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, subject to - * the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS - * IN THE SOFTWARE. - */ - -#ifndef _ASM_ARM_XEN_HYPERCALL_H -#define _ASM_ARM_XEN_HYPERCALL_H - -#include <linux/bug.h> - -#include <xen/interface/xen.h> -#include <xen/interface/sched.h> -#include <xen/interface/platform.h> - -long privcmd_call(unsigned call, unsigned long a1, - unsigned long a2, unsigned long a3, - unsigned long a4, unsigned long a5); -int HYPERVISOR_xen_version(int cmd, void *arg); -int HYPERVISOR_console_io(int cmd, int count, char *str); -int HYPERVISOR_grant_table_op(unsigned int cmd, void *uop, unsigned int count); -int HYPERVISOR_sched_op(int cmd, void *arg); -int HYPERVISOR_event_channel_op(int cmd, void *arg); -unsigned long HYPERVISOR_hvm_op(int op, void *arg); -int HYPERVISOR_memory_op(unsigned int cmd, void *arg); -int HYPERVISOR_physdev_op(int cmd, void *arg); -int HYPERVISOR_vcpu_op(int cmd, int vcpuid, void *extra_args); -int HYPERVISOR_tmem_op(void *arg); -int HYPERVISOR_vm_assist(unsigned int cmd, unsigned int type); -int HYPERVISOR_platform_op_raw(void *arg); -static inline int HYPERVISOR_platform_op(struct xen_platform_op *op) -{ - op->interface_version = XENPF_INTERFACE_VERSION; - return HYPERVISOR_platform_op_raw(op); -} -int HYPERVISOR_multicall(struct multicall_entry *calls, uint32_t nr); - -static inline int -HYPERVISOR_suspend(unsigned long start_info_mfn) -{ - struct sched_shutdown r = { .reason = SHUTDOWN_suspend }; - - /* start_info_mfn is unused on ARM */ - return HYPERVISOR_sched_op(SCHEDOP_shutdown, &r); -} - -static inline void -MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va, - unsigned int new_val, unsigned long flags) -{ - BUG(); -} - -static inline void -MULTI_mmu_update(struct multicall_entry *mcl, struct mmu_update *req, - int count, int *success_count, domid_t domid) -{ - BUG(); -} - -#endif /* _ASM_ARM_XEN_HYPERCALL_H */ +#include <xen/arm/hypercall.h> diff --git a/arch/arm/include/asm/xen/hypervisor.h b/arch/arm/include/asm/xen/hypervisor.h index 95251512e2c4..d6e7709d0688 100644 --- a/arch/arm/include/asm/xen/hypervisor.h +++ b/arch/arm/include/asm/xen/hypervisor.h @@ -1,39 +1 @@ -#ifndef _ASM_ARM_XEN_HYPERVISOR_H -#define _ASM_ARM_XEN_HYPERVISOR_H - -#include <linux/init.h> - -extern struct shared_info *HYPERVISOR_shared_info; -extern struct start_info *xen_start_info; - -/* Lazy mode for batching updates / context switch */ -enum paravirt_lazy_mode { - PARAVIRT_LAZY_NONE, - PARAVIRT_LAZY_MMU, - PARAVIRT_LAZY_CPU, -}; - -static inline enum paravirt_lazy_mode paravirt_get_lazy_mode(void) -{ - return PARAVIRT_LAZY_NONE; -} - -extern struct dma_map_ops *xen_dma_ops; - -#ifdef CONFIG_XEN -void __init xen_early_init(void); -#else -static inline void xen_early_init(void) { return; } -#endif - -#ifdef CONFIG_HOTPLUG_CPU -static inline void xen_arch_register_cpu(int num) -{ -} - -static inline void xen_arch_unregister_cpu(int num) -{ -} -#endif - -#endif /* _ASM_ARM_XEN_HYPERVISOR_H */ +#include <xen/arm/hypervisor.h> diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h index 75d596862892..88c0d75da190 100644 --- a/arch/arm/include/asm/xen/interface.h +++ b/arch/arm/include/asm/xen/interface.h @@ -1,85 +1 @@ -/****************************************************************************** - * Guest OS interface to ARM Xen. - * - * Stefano Stabellini <stefano.stabellini@eu.citrix.com>, Citrix, 2012 - */ - -#ifndef _ASM_ARM_XEN_INTERFACE_H -#define _ASM_ARM_XEN_INTERFACE_H - -#include <linux/types.h> - -#define uint64_aligned_t uint64_t __attribute__((aligned(8))) - -#define __DEFINE_GUEST_HANDLE(name, type) \ - typedef struct { union { type *p; uint64_aligned_t q; }; } \ - __guest_handle_ ## name - -#define DEFINE_GUEST_HANDLE_STRUCT(name) \ - __DEFINE_GUEST_HANDLE(name, struct name) -#define DEFINE_GUEST_HANDLE(name) __DEFINE_GUEST_HANDLE(name, name) -#define GUEST_HANDLE(name) __guest_handle_ ## name - -#define set_xen_guest_handle(hnd, val) \ - do { \ - if (sizeof(hnd) == 8) \ - *(uint64_t *)&(hnd) = 0; \ - (hnd).p = val; \ - } while (0) - -#define __HYPERVISOR_platform_op_raw __HYPERVISOR_platform_op - -#ifndef __ASSEMBLY__ -/* Explicitly size integers that represent pfns in the interface with - * Xen so that we can have one ABI that works for 32 and 64 bit guests. - * Note that this means that the xen_pfn_t type may be capable of - * representing pfn's which the guest cannot represent in its own pfn - * type. However since pfn space is controlled by the guest this is - * fine since it simply wouldn't be able to create any sure pfns in - * the first place. - */ -typedef uint64_t xen_pfn_t; -#define PRI_xen_pfn "llx" -typedef uint64_t xen_ulong_t; -#define PRI_xen_ulong "llx" -typedef int64_t xen_long_t; -#define PRI_xen_long "llx" -/* Guest handles for primitive C types. */ -__DEFINE_GUEST_HANDLE(uchar, unsigned char); -__DEFINE_GUEST_HANDLE(uint, unsigned int); -DEFINE_GUEST_HANDLE(char); -DEFINE_GUEST_HANDLE(int); -DEFINE_GUEST_HANDLE(void); -DEFINE_GUEST_HANDLE(uint64_t); -DEFINE_GUEST_HANDLE(uint32_t); -DEFINE_GUEST_HANDLE(xen_pfn_t); -DEFINE_GUEST_HANDLE(xen_ulong_t); - -/* Maximum number of virtual CPUs in multi-processor guests. */ -#define MAX_VIRT_CPUS 1 - -struct arch_vcpu_info { }; -struct arch_shared_info { }; - -/* TODO: Move pvclock definitions some place arch independent */ -struct pvclock_vcpu_time_info { - u32 version; - u32 pad0; - u64 tsc_timestamp; - u64 system_time; - u32 tsc_to_system_mul; - s8 tsc_shift; - u8 flags; - u8 pad[2]; -} __attribute__((__packed__)); /* 32 bytes */ - -/* It is OK to have a 12 bytes struct with no padding because it is packed */ -struct pvclock_wall_clock { - u32 version; - u32 sec; - u32 nsec; - u32 sec_hi; -} __attribute__((__packed__)); -#endif - -#endif /* _ASM_ARM_XEN_INTERFACE_H */ +#include <xen/arm/interface.h> diff --git a/arch/arm/include/asm/xen/page-coherent.h b/arch/arm/include/asm/xen/page-coherent.h index 95ce6ac3a971..b3ef061d8b74 100644 --- a/arch/arm/include/asm/xen/page-coherent.h +++ b/arch/arm/include/asm/xen/page-coherent.h @@ -1,98 +1 @@ -#ifndef _ASM_ARM_XEN_PAGE_COHERENT_H -#define _ASM_ARM_XEN_PAGE_COHERENT_H - -#include <asm/page.h> -#include <linux/dma-mapping.h> - -void __xen_dma_map_page(struct device *hwdev, struct page *page, - dma_addr_t dev_addr, unsigned long offset, size_t size, - enum dma_data_direction dir, unsigned long attrs); -void __xen_dma_unmap_page(struct device *hwdev, dma_addr_t handle, - size_t size, enum dma_data_direction dir, - unsigned long attrs); -void __xen_dma_sync_single_for_cpu(struct device *hwdev, - dma_addr_t handle, size_t size, enum dma_data_direction dir); - -void __xen_dma_sync_single_for_device(struct device *hwdev, - dma_addr_t handle, size_t size, enum dma_data_direction dir); - -static inline void *xen_alloc_coherent_pages(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, gfp_t flags, unsigned long attrs) -{ - return __generic_dma_ops(hwdev)->alloc(hwdev, size, dma_handle, flags, attrs); -} - -static inline void xen_free_coherent_pages(struct device *hwdev, size_t size, - void *cpu_addr, dma_addr_t dma_handle, unsigned long attrs) -{ - __generic_dma_ops(hwdev)->free(hwdev, size, cpu_addr, dma_handle, attrs); -} - -static inline void xen_dma_map_page(struct device *hwdev, struct page *page, - dma_addr_t dev_addr, unsigned long offset, size_t size, - enum dma_data_direction dir, unsigned long attrs) -{ - unsigned long page_pfn = page_to_xen_pfn(page); - unsigned long dev_pfn = XEN_PFN_DOWN(dev_addr); - unsigned long compound_pages = - (1<<compound_order(page)) * XEN_PFN_PER_PAGE; - bool local = (page_pfn <= dev_pfn) && - (dev_pfn - page_pfn < compound_pages); - - /* - * Dom0 is mapped 1:1, while the Linux page can span across - * multiple Xen pages, it's not possible for it to contain a - * mix of local and foreign Xen pages. So if the first xen_pfn - * == mfn the page is local otherwise it's a foreign page - * grant-mapped in dom0. If the page is local we can safely - * call the native dma_ops function, otherwise we call the xen - * specific function. - */ - if (local) - __generic_dma_ops(hwdev)->map_page(hwdev, page, offset, size, dir, attrs); - else - __xen_dma_map_page(hwdev, page, dev_addr, offset, size, dir, attrs); -} - -static inline void xen_dma_unmap_page(struct device *hwdev, dma_addr_t handle, - size_t size, enum dma_data_direction dir, unsigned long attrs) -{ - unsigned long pfn = PFN_DOWN(handle); - /* - * Dom0 is mapped 1:1, while the Linux page can be spanned accross - * multiple Xen page, it's not possible to have a mix of local and - * foreign Xen page. Dom0 is mapped 1:1, so calling pfn_valid on a - * foreign mfn will always return false. If the page is local we can - * safely call the native dma_ops function, otherwise we call the xen - * specific function. - */ - if (pfn_valid(pfn)) { - if (__generic_dma_ops(hwdev)->unmap_page) - __generic_dma_ops(hwdev)->unmap_page(hwdev, handle, size, dir, attrs); - } else - __xen_dma_unmap_page(hwdev, handle, size, dir, attrs); -} - -static inline void xen_dma_sync_single_for_cpu(struct device *hwdev, - dma_addr_t handle, size_t size, enum dma_data_direction dir) -{ - unsigned long pfn = PFN_DOWN(handle); - if (pfn_valid(pfn)) { - if (__generic_dma_ops(hwdev)->sync_single_for_cpu) - __generic_dma_ops(hwdev)->sync_single_for_cpu(hwdev, handle, size, dir); - } else - __xen_dma_sync_single_for_cpu(hwdev, handle, size, dir); -} - -static inline void xen_dma_sync_single_for_device(struct device *hwdev, - dma_addr_t handle, size_t size, enum dma_data_direction dir) -{ - unsigned long pfn = PFN_DOWN(handle); - if (pfn_valid(pfn)) { - if (__generic_dma_ops(hwdev)->sync_single_for_device) - __generic_dma_ops(hwdev)->sync_single_for_device(hwdev, handle, size, dir); - } else - __xen_dma_sync_single_for_device(hwdev, handle, size, dir); -} - -#endif /* _ASM_ARM_XEN_PAGE_COHERENT_H */ +#include <xen/arm/page-coherent.h> diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h index 415dbc6e43fd..31bbc803cecb 100644 --- a/arch/arm/include/asm/xen/page.h +++ b/arch/arm/include/asm/xen/page.h @@ -1,122 +1 @@ -#ifndef _ASM_ARM_XEN_PAGE_H -#define _ASM_ARM_XEN_PAGE_H - -#include <asm/page.h> -#include <asm/pgtable.h> - -#include <linux/pfn.h> -#include <linux/types.h> -#include <linux/dma-mapping.h> - -#include <xen/xen.h> -#include <xen/interface/grant_table.h> - -#define phys_to_machine_mapping_valid(pfn) (1) - -/* Xen machine address */ -typedef struct xmaddr { - phys_addr_t maddr; -} xmaddr_t; - -/* Xen pseudo-physical address */ -typedef struct xpaddr { - phys_addr_t paddr; -} xpaddr_t; - -#define XMADDR(x) ((xmaddr_t) { .maddr = (x) }) -#define XPADDR(x) ((xpaddr_t) { .paddr = (x) }) - -#define INVALID_P2M_ENTRY (~0UL) - -/* - * The pseudo-physical frame (pfn) used in all the helpers is always based - * on Xen page granularity (i.e 4KB). - * - * A Linux page may be split across multiple non-contiguous Xen page so we - * have to keep track with frame based on 4KB page granularity. - * - * PV drivers should never make a direct usage of those helpers (particularly - * pfn_to_gfn and gfn_to_pfn). - */ - -unsigned long __pfn_to_mfn(unsigned long pfn); -extern struct rb_root phys_to_mach; - -/* Pseudo-physical <-> Guest conversion */ -static inline unsigned long pfn_to_gfn(unsigned long pfn) -{ - return pfn; -} - -static inline unsigned long gfn_to_pfn(unsigned long gfn) -{ - return gfn; -} - -/* Pseudo-physical <-> BUS conversion */ -static inline unsigned long pfn_to_bfn(unsigned long pfn) -{ - unsigned long mfn; - - if (phys_to_mach.rb_node != NULL) { - mfn = __pfn_to_mfn(pfn); - if (mfn != INVALID_P2M_ENTRY) - return mfn; - } - - return pfn; -} - -static inline unsigned long bfn_to_pfn(unsigned long bfn) -{ - return bfn; -} - -#define bfn_to_local_pfn(bfn) bfn_to_pfn(bfn) - -/* VIRT <-> GUEST conversion */ -#define virt_to_gfn(v) (pfn_to_gfn(virt_to_phys(v) >> XEN_PAGE_SHIFT)) -#define gfn_to_virt(m) (__va(gfn_to_pfn(m) << XEN_PAGE_SHIFT)) - -/* Only used in PV code. But ARM guests are always HVM. */ -static inline xmaddr_t arbitrary_virt_to_machine(void *vaddr) -{ - BUG(); -} - -/* TODO: this shouldn't be here but it is because the frontend drivers - * are using it (its rolled in headers) even though we won't hit the code path. - * So for right now just punt with this. - */ -static inline pte_t *lookup_address(unsigned long address, unsigned int *level) -{ - BUG(); - return NULL; -} - -extern int set_foreign_p2m_mapping(struct gnttab_map_grant_ref *map_ops, - struct gnttab_map_grant_ref *kmap_ops, - struct page **pages, unsigned int count); - -extern int clear_foreign_p2m_mapping(struct gnttab_unmap_grant_ref *unmap_ops, - struct gnttab_unmap_grant_ref *kunmap_ops, - struct page **pages, unsigned int count); - -bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn); -bool __set_phys_to_machine_multi(unsigned long pfn, unsigned long mfn, - unsigned long nr_pages); - -static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn) -{ - return __set_phys_to_machine(pfn, mfn); -} - -#define xen_remap(cookie, size) ioremap_cache((cookie), (size)) -#define xen_unmap(cookie) iounmap((cookie)) - -bool xen_arch_need_swiotlb(struct device *dev, - phys_addr_t phys, - dma_addr_t dev_addr); -unsigned long xen_get_swiotlb_free_pages(unsigned int order); - -#endif /* _ASM_ARM_XEN_PAGE_H */ +#include <xen/arm/page.h> diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h index b38c10c73579..af05f8e0903e 100644 --- a/arch/arm/include/uapi/asm/kvm.h +++ b/arch/arm/include/uapi/asm/kvm.h @@ -87,9 +87,11 @@ struct kvm_regs { /* Supported VGICv3 address types */ #define KVM_VGIC_V3_ADDR_TYPE_DIST 2 #define KVM_VGIC_V3_ADDR_TYPE_REDIST 3 +#define KVM_VGIC_ITS_ADDR_TYPE 4 #define KVM_VGIC_V3_DIST_SIZE SZ_64K #define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K) +#define KVM_VGIC_V3_ITS_SIZE (2 * SZ_64K) #define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */ #define KVM_ARM_VCPU_PSCI_0_2 1 /* CPU uses PSCI v0.2 */ diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h index 2cb9dc770e1d..314100a06ccb 100644 --- a/arch/arm/include/uapi/asm/unistd.h +++ b/arch/arm/include/uapi/asm/unistd.h @@ -420,6 +420,9 @@ #define __NR_copy_file_range (__NR_SYSCALL_BASE+391) #define __NR_preadv2 (__NR_SYSCALL_BASE+392) #define __NR_pwritev2 (__NR_SYSCALL_BASE+393) +#define __NR_pkey_mprotect (__NR_SYSCALL_BASE+394) +#define __NR_pkey_alloc (__NR_SYSCALL_BASE+395) +#define __NR_pkey_free (__NR_SYSCALL_BASE+396) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 68c2c097cffe..ad325a8c7e1e 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -33,7 +33,7 @@ endif obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ISA_DMA_API) += dma.o obj-$(CONFIG_FIQ) += fiq.o fiqasm.o -obj-$(CONFIG_MODULES) += module.o +obj-$(CONFIG_MODULES) += armksyms.o module.o obj-$(CONFIG_ARM_MODULE_PLTS) += module-plts.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c new file mode 100644 index 000000000000..7e45f69a0ddc --- /dev/null +++ b/arch/arm/kernel/armksyms.c @@ -0,0 +1,183 @@ +/* + * linux/arch/arm/kernel/armksyms.c + * + * Copyright (C) 2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/export.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/cryptohash.h> +#include <linux/delay.h> +#include <linux/in6.h> +#include <linux/syscalls.h> +#include <linux/uaccess.h> +#include <linux/io.h> +#include <linux/arm-smccc.h> + +#include <asm/checksum.h> +#include <asm/ftrace.h> + +/* + * libgcc functions - functions that are used internally by the + * compiler... (prototypes are not correct though, but that + * doesn't really matter since they're not versioned). + */ +extern void __ashldi3(void); +extern void __ashrdi3(void); +extern void __divsi3(void); +extern void __lshrdi3(void); +extern void __modsi3(void); +extern void __muldi3(void); +extern void __ucmpdi2(void); +extern void __udivsi3(void); +extern void __umodsi3(void); +extern void __do_div64(void); +extern void __bswapsi2(void); +extern void __bswapdi2(void); + +extern void __aeabi_idiv(void); +extern void __aeabi_idivmod(void); +extern void __aeabi_lasr(void); +extern void __aeabi_llsl(void); +extern void __aeabi_llsr(void); +extern void __aeabi_lmul(void); +extern void __aeabi_uidiv(void); +extern void __aeabi_uidivmod(void); +extern void __aeabi_ulcmp(void); + +extern void fpundefinstr(void); + +void mmioset(void *, unsigned int, size_t); +void mmiocpy(void *, const void *, size_t); + + /* platform dependent support */ +EXPORT_SYMBOL(arm_delay_ops); + + /* networking */ +EXPORT_SYMBOL(csum_partial); +EXPORT_SYMBOL(csum_partial_copy_from_user); +EXPORT_SYMBOL(csum_partial_copy_nocheck); +EXPORT_SYMBOL(__csum_ipv6_magic); + + /* io */ +#ifndef __raw_readsb +EXPORT_SYMBOL(__raw_readsb); +#endif +#ifndef __raw_readsw +EXPORT_SYMBOL(__raw_readsw); +#endif +#ifndef __raw_readsl +EXPORT_SYMBOL(__raw_readsl); +#endif +#ifndef __raw_writesb +EXPORT_SYMBOL(__raw_writesb); +#endif +#ifndef __raw_writesw +EXPORT_SYMBOL(__raw_writesw); +#endif +#ifndef __raw_writesl +EXPORT_SYMBOL(__raw_writesl); +#endif + + /* string / mem functions */ +EXPORT_SYMBOL(strchr); +EXPORT_SYMBOL(strrchr); +EXPORT_SYMBOL(memset); +EXPORT_SYMBOL(memcpy); +EXPORT_SYMBOL(memmove); +EXPORT_SYMBOL(memchr); +EXPORT_SYMBOL(__memzero); + +EXPORT_SYMBOL(mmioset); +EXPORT_SYMBOL(mmiocpy); + +#ifdef CONFIG_MMU +EXPORT_SYMBOL(copy_page); + +EXPORT_SYMBOL(arm_copy_from_user); +EXPORT_SYMBOL(arm_copy_to_user); +EXPORT_SYMBOL(arm_clear_user); + +EXPORT_SYMBOL(__get_user_1); +EXPORT_SYMBOL(__get_user_2); +EXPORT_SYMBOL(__get_user_4); +EXPORT_SYMBOL(__get_user_8); + +#ifdef __ARMEB__ +EXPORT_SYMBOL(__get_user_64t_1); +EXPORT_SYMBOL(__get_user_64t_2); +EXPORT_SYMBOL(__get_user_64t_4); +EXPORT_SYMBOL(__get_user_32t_8); +#endif + +EXPORT_SYMBOL(__put_user_1); +EXPORT_SYMBOL(__put_user_2); +EXPORT_SYMBOL(__put_user_4); +EXPORT_SYMBOL(__put_user_8); +#endif + + /* gcc lib functions */ +EXPORT_SYMBOL(__ashldi3); +EXPORT_SYMBOL(__ashrdi3); +EXPORT_SYMBOL(__divsi3); +EXPORT_SYMBOL(__lshrdi3); +EXPORT_SYMBOL(__modsi3); +EXPORT_SYMBOL(__muldi3); +EXPORT_SYMBOL(__ucmpdi2); +EXPORT_SYMBOL(__udivsi3); +EXPORT_SYMBOL(__umodsi3); +EXPORT_SYMBOL(__do_div64); +EXPORT_SYMBOL(__bswapsi2); +EXPORT_SYMBOL(__bswapdi2); + +#ifdef CONFIG_AEABI +EXPORT_SYMBOL(__aeabi_idiv); +EXPORT_SYMBOL(__aeabi_idivmod); +EXPORT_SYMBOL(__aeabi_lasr); +EXPORT_SYMBOL(__aeabi_llsl); +EXPORT_SYMBOL(__aeabi_llsr); +EXPORT_SYMBOL(__aeabi_lmul); +EXPORT_SYMBOL(__aeabi_uidiv); +EXPORT_SYMBOL(__aeabi_uidivmod); +EXPORT_SYMBOL(__aeabi_ulcmp); +#endif + + /* bitops */ +EXPORT_SYMBOL(_set_bit); +EXPORT_SYMBOL(_test_and_set_bit); +EXPORT_SYMBOL(_clear_bit); +EXPORT_SYMBOL(_test_and_clear_bit); +EXPORT_SYMBOL(_change_bit); +EXPORT_SYMBOL(_test_and_change_bit); +EXPORT_SYMBOL(_find_first_zero_bit_le); +EXPORT_SYMBOL(_find_next_zero_bit_le); +EXPORT_SYMBOL(_find_first_bit_le); +EXPORT_SYMBOL(_find_next_bit_le); + +#ifdef __ARMEB__ +EXPORT_SYMBOL(_find_first_zero_bit_be); +EXPORT_SYMBOL(_find_next_zero_bit_be); +EXPORT_SYMBOL(_find_first_bit_be); +EXPORT_SYMBOL(_find_next_bit_be); +#endif + +#ifdef CONFIG_FUNCTION_TRACER +#ifdef CONFIG_OLD_MCOUNT +EXPORT_SYMBOL(mcount); +#endif +EXPORT_SYMBOL(__gnu_mcount_nc); +#endif + +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT +EXPORT_SYMBOL(__pv_phys_pfn_offset); +EXPORT_SYMBOL(__pv_offset); +#endif + +#ifdef CONFIG_HAVE_ARM_SMCCC +EXPORT_SYMBOL(arm_smccc_smc); +EXPORT_SYMBOL(arm_smccc_hvc); +#endif diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 703fa0f3cd8f..08030b18f10a 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -403,6 +403,9 @@ CALL(sys_copy_file_range) CALL(sys_preadv2) CALL(sys_pwritev2) + CALL(sys_pkey_mprotect) +/* 395 */ CALL(sys_pkey_alloc) + CALL(sys_pkey_free) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/entry-ftrace.S b/arch/arm/kernel/entry-ftrace.S index b629d3f11c3d..c73c4030ca5d 100644 --- a/arch/arm/kernel/entry-ftrace.S +++ b/arch/arm/kernel/entry-ftrace.S @@ -7,7 +7,6 @@ #include <asm/assembler.h> #include <asm/ftrace.h> #include <asm/unwind.h> -#include <asm/export.h> #include "entry-header.S" @@ -154,7 +153,6 @@ ENTRY(mcount) __mcount _old #endif ENDPROC(mcount) -EXPORT_SYMBOL(mcount) #ifdef CONFIG_DYNAMIC_FTRACE ENTRY(ftrace_caller_old) @@ -207,7 +205,6 @@ UNWIND(.fnstart) #endif UNWIND(.fnend) ENDPROC(__gnu_mcount_nc) -EXPORT_SYMBOL(__gnu_mcount_nc) #ifdef CONFIG_DYNAMIC_FTRACE ENTRY(ftrace_caller) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index f41cee4c5746..04286fd9e09c 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -22,7 +22,6 @@ #include <asm/memory.h> #include <asm/thread_info.h> #include <asm/pgtable.h> -#include <asm/export.h> #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_SEMIHOSTING) #include CONFIG_DEBUG_LL_INCLUDE @@ -728,8 +727,6 @@ __pv_phys_pfn_offset: __pv_offset: .quad 0 .size __pv_offset, . -__pv_offset -EXPORT_SYMBOL(__pv_phys_pfn_offset) -EXPORT_SYMBOL(__pv_offset) #endif #include "head-common.S" diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index b8df45883cf7..188180b5523d 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -925,9 +925,9 @@ static bool core_has_os_save_restore(void) } } -static void reset_ctrl_regs(void *unused) +static void reset_ctrl_regs(unsigned int cpu) { - int i, raw_num_brps, err = 0, cpu = smp_processor_id(); + int i, raw_num_brps, err = 0; u32 val; /* @@ -1020,25 +1020,20 @@ out_mdbgen: cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu)); } -static int dbg_reset_notify(struct notifier_block *self, - unsigned long action, void *cpu) +static int dbg_reset_online(unsigned int cpu) { - if ((action & ~CPU_TASKS_FROZEN) == CPU_ONLINE) - smp_call_function_single((int)cpu, reset_ctrl_regs, NULL, 1); - - return NOTIFY_OK; + local_irq_disable(); + reset_ctrl_regs(cpu); + local_irq_enable(); + return 0; } -static struct notifier_block dbg_reset_nb = { - .notifier_call = dbg_reset_notify, -}; - #ifdef CONFIG_CPU_PM static int dbg_cpu_pm_notify(struct notifier_block *self, unsigned long action, void *v) { if (action == CPU_PM_EXIT) - reset_ctrl_regs(NULL); + reset_ctrl_regs(smp_processor_id()); return NOTIFY_OK; } @@ -1059,6 +1054,8 @@ static inline void pm_init(void) static int __init arch_hw_breakpoint_init(void) { + int ret; + debug_arch = get_debug_arch(); if (!debug_arch_supported()) { @@ -1072,25 +1069,28 @@ static int __init arch_hw_breakpoint_init(void) core_num_brps = get_num_brps(); core_num_wrps = get_num_wrps(); - cpu_notifier_register_begin(); - /* * We need to tread carefully here because DBGSWENABLE may be * driven low on this core and there isn't an architected way to * determine that. */ + get_online_cpus(); register_undef_hook(&debug_reg_hook); /* - * Reset the breakpoint resources. We assume that a halting - * debugger will leave the world in a nice state for us. + * Register CPU notifier which resets the breakpoint resources. We + * assume that a halting debugger will leave the world in a nice state + * for us. */ - on_each_cpu(reset_ctrl_regs, NULL, 1); + ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "arm/hw_breakpoint:online", + dbg_reset_online, NULL); unregister_undef_hook(&debug_reg_hook); - if (!cpumask_empty(&debug_err_mask)) { + if (WARN_ON(ret < 0) || !cpumask_empty(&debug_err_mask)) { core_num_brps = 0; core_num_wrps = 0; - cpu_notifier_register_done(); + if (ret > 0) + cpuhp_remove_state_nocalls(ret); + put_online_cpus(); return 0; } @@ -1108,12 +1108,9 @@ static int __init arch_hw_breakpoint_init(void) TRAP_HWBKPT, "watchpoint debug exception"); hook_ifault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT, "breakpoint debug exception"); + put_online_cpus(); - /* Register hotplug and PM notifiers. */ - __register_cpu_notifier(&dbg_reset_nb); - - cpu_notifier_register_done(); - + /* Register PM notifiers. */ pm_init(); return 0; } diff --git a/arch/arm/kernel/smccc-call.S b/arch/arm/kernel/smccc-call.S index 37669e7e13af..2e48b674aab1 100644 --- a/arch/arm/kernel/smccc-call.S +++ b/arch/arm/kernel/smccc-call.S @@ -16,7 +16,6 @@ #include <asm/opcodes-sec.h> #include <asm/opcodes-virt.h> #include <asm/unwind.h> -#include <asm/export.h> /* * Wrap c macros in asm macros to delay expansion until after the @@ -52,7 +51,6 @@ UNWIND( .fnend) ENTRY(arm_smccc_smc) SMCCC SMCCC_SMC ENDPROC(arm_smccc_smc) -EXPORT_SYMBOL(arm_smccc_smc) /* * void smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2, @@ -62,4 +60,3 @@ EXPORT_SYMBOL(arm_smccc_smc) ENTRY(arm_smccc_hvc) SMCCC SMCCC_HVC ENDPROC(arm_smccc_hvc) -EXPORT_SYMBOL(arm_smccc_hvc) diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index bc698383e822..9688ec0c6ef4 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -74,6 +74,26 @@ void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs)); } +void dump_backtrace_stm(u32 *stack, u32 instruction) +{ + char str[80], *p; + unsigned int x; + int reg; + + for (reg = 10, x = 0, p = str; reg >= 0; reg--) { + if (instruction & BIT(reg)) { + p += sprintf(p, " r%d:%08x", reg, *stack--); + if (++x == 6) { + x = 0; + p = str; + printk("%s\n", str); + } + } + } + if (p != str) + printk("%s\n", str); +} + #ifndef CONFIG_ARM_UNWIND /* * Stack pointers should always be within the kernels view of diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S index 7fa487ef7e2f..37b2a11af345 100644 --- a/arch/arm/kernel/vmlinux-xip.lds.S +++ b/arch/arm/kernel/vmlinux-xip.lds.S @@ -3,6 +3,9 @@ * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz> */ +/* No __ro_after_init data in the .rodata section - which will always be ro */ +#define RO_AFTER_INIT_DATA + #include <asm-generic/vmlinux.lds.h> #include <asm/cache.h> #include <asm/thread_info.h> @@ -223,6 +226,8 @@ SECTIONS . = ALIGN(PAGE_SIZE); __init_end = .; + *(.data..ro_after_init) + NOSAVE_DATA CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) READ_MOSTLY_DATA(L1_CACHE_BYTES) diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig index 3e1cd0452d67..90d0176fb30d 100644 --- a/arch/arm/kvm/Kconfig +++ b/arch/arm/kvm/Kconfig @@ -34,6 +34,7 @@ config KVM select HAVE_KVM_IRQFD select HAVE_KVM_IRQCHIP select HAVE_KVM_IRQ_ROUTING + select HAVE_KVM_MSI depends on ARM_VIRT_EXT && ARM_LPAE && ARM_ARCH_TIMER ---help--- Support hosting virtualized guest machines. diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile index f19842ea5418..d571243ab4d1 100644 --- a/arch/arm/kvm/Makefile +++ b/arch/arm/kvm/Makefile @@ -32,5 +32,6 @@ obj-y += $(KVM)/arm/vgic/vgic-mmio.o obj-y += $(KVM)/arm/vgic/vgic-mmio-v2.o obj-y += $(KVM)/arm/vgic/vgic-mmio-v3.o obj-y += $(KVM)/arm/vgic/vgic-kvm-device.o +obj-y += $(KVM)/arm/vgic/vgic-its.o obj-y += $(KVM)/irqchip.o obj-y += $(KVM)/arm/arch_timer.o diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 08bb84f2ad58..8f92efa8460e 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -114,11 +114,18 @@ void kvm_arch_check_processor_compat(void *rtn) */ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) { - int ret = 0; + int ret, cpu; if (type) return -EINVAL; + kvm->arch.last_vcpu_ran = alloc_percpu(typeof(*kvm->arch.last_vcpu_ran)); + if (!kvm->arch.last_vcpu_ran) + return -ENOMEM; + + for_each_possible_cpu(cpu) + *per_cpu_ptr(kvm->arch.last_vcpu_ran, cpu) = -1; + ret = kvm_alloc_stage2_pgd(kvm); if (ret) goto out_fail_alloc; @@ -141,6 +148,8 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) out_free_stage2_pgd: kvm_free_stage2_pgd(kvm); out_fail_alloc: + free_percpu(kvm->arch.last_vcpu_ran); + kvm->arch.last_vcpu_ran = NULL; return ret; } @@ -168,6 +177,9 @@ void kvm_arch_destroy_vm(struct kvm *kvm) { int i; + free_percpu(kvm->arch.last_vcpu_ran); + kvm->arch.last_vcpu_ran = NULL; + for (i = 0; i < KVM_MAX_VCPUS; ++i) { if (kvm->vcpus[i]) { kvm_arch_vcpu_free(kvm->vcpus[i]); @@ -209,6 +221,12 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) case KVM_CAP_MAX_VCPUS: r = KVM_MAX_VCPUS; break; + case KVM_CAP_MSI_DEVID: + if (!kvm) + r = -EINVAL; + else + r = kvm->arch.vgic.msis_require_devid; + break; default: r = kvm_arch_dev_ioctl_check_extension(kvm, ext); break; @@ -312,6 +330,19 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) { + int *last_ran; + + last_ran = this_cpu_ptr(vcpu->kvm->arch.last_vcpu_ran); + + /* + * We might get preempted before the vCPU actually runs, but + * over-invalidation doesn't affect correctness. + */ + if (*last_ran != vcpu->vcpu_id) { + kvm_call_hyp(__kvm_tlb_flush_local_vmid, vcpu); + *last_ran = vcpu->vcpu_id; + } + vcpu->cpu = cpu; vcpu->arch.host_cpu_context = this_cpu_ptr(kvm_host_cpu_state); diff --git a/arch/arm/kvm/hyp/tlb.c b/arch/arm/kvm/hyp/tlb.c index 729652854f90..6d810af2d9fd 100644 --- a/arch/arm/kvm/hyp/tlb.c +++ b/arch/arm/kvm/hyp/tlb.c @@ -55,6 +55,21 @@ void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) __kvm_tlb_flush_vmid(kvm); } +void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu) +{ + struct kvm *kvm = kern_hyp_va(kern_hyp_va(vcpu)->kvm); + + /* Switch to requested VMID */ + write_sysreg(kvm->arch.vttbr, VTTBR); + isb(); + + write_sysreg(0, TLBIALL); + dsb(nsh); + isb(); + + write_sysreg(0, VTTBR); +} + void __hyp_text __kvm_flush_vm_context(void) { write_sysreg(0, TLBIALLNSNHIS); diff --git a/arch/arm/lib/ashldi3.S b/arch/arm/lib/ashldi3.S index a7e7de89bd75..b05e95840651 100644 --- a/arch/arm/lib/ashldi3.S +++ b/arch/arm/lib/ashldi3.S @@ -28,7 +28,6 @@ Boston, MA 02110-1301, USA. */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> #ifdef __ARMEB__ #define al r1 @@ -53,5 +52,3 @@ ENTRY(__aeabi_llsl) ENDPROC(__ashldi3) ENDPROC(__aeabi_llsl) -EXPORT_SYMBOL(__ashldi3) -EXPORT_SYMBOL(__aeabi_llsl) diff --git a/arch/arm/lib/ashrdi3.S b/arch/arm/lib/ashrdi3.S index 490336e42518..275d7d2341a4 100644 --- a/arch/arm/lib/ashrdi3.S +++ b/arch/arm/lib/ashrdi3.S @@ -28,7 +28,6 @@ Boston, MA 02110-1301, USA. */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> #ifdef __ARMEB__ #define al r1 @@ -53,5 +52,3 @@ ENTRY(__aeabi_lasr) ENDPROC(__ashrdi3) ENDPROC(__aeabi_lasr) -EXPORT_SYMBOL(__ashrdi3) -EXPORT_SYMBOL(__aeabi_lasr) diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S index fab5a50503ae..7d7952e5a3b1 100644 --- a/arch/arm/lib/backtrace.S +++ b/arch/arm/lib/backtrace.S @@ -10,6 +10,7 @@ * 27/03/03 Ian Molton Clean up CONFIG_CPU * */ +#include <linux/kern_levels.h> #include <linux/linkage.h> #include <asm/assembler.h> .text @@ -83,13 +84,13 @@ for_each_frame: tst frame, mask @ Check for address exceptions teq r3, r1, lsr #11 ldreq r0, [frame, #-8] @ get sp subeq r0, r0, #4 @ point at the last arg - bleq .Ldumpstm @ dump saved registers + bleq dump_backtrace_stm @ dump saved registers 1004: ldr r1, [sv_pc, #0] @ if stmfd sp!, {..., fp, ip, lr, pc} ldr r3, .Ldsi @ instruction exists, teq r3, r1, lsr #11 subeq r0, frame, #16 - bleq .Ldumpstm @ dump saved registers + bleq dump_backtrace_stm @ dump saved registers teq sv_fp, #0 @ zero saved fp means beq no_frame @ no further frames @@ -112,38 +113,6 @@ ENDPROC(c_backtrace) .long 1004b, 1006b .popsection -#define instr r4 -#define reg r5 -#define stack r6 - -.Ldumpstm: stmfd sp!, {instr, reg, stack, r7, lr} - mov stack, r0 - mov instr, r1 - mov reg, #10 - mov r7, #0 -1: mov r3, #1 - ARM( tst instr, r3, lsl reg ) - THUMB( lsl r3, reg ) - THUMB( tst instr, r3 ) - beq 2f - add r7, r7, #1 - teq r7, #6 - moveq r7, #0 - adr r3, .Lcr - addne r3, r3, #1 @ skip newline - ldr r2, [stack], #-4 - mov r1, reg - adr r0, .Lfp - bl printk -2: subs reg, reg, #1 - bpl 1b - teq r7, #0 - adrne r0, .Lcr - blne printk - ldmfd sp!, {instr, reg, stack, r7, pc} - -.Lfp: .asciz " r%d:%08x%s" -.Lcr: .asciz "\n" .Lbad: .asciz "Backtrace aborted due to bad frame pointer <%p>\n" .align .Ldsi: .word 0xe92dd800 >> 11 @ stmfd sp!, {... fp, ip, lr, pc} diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index df06638b327c..7d807cfd8ef5 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -1,6 +1,5 @@ #include <asm/assembler.h> #include <asm/unwind.h> -#include <asm/export.h> #if __LINUX_ARM_ARCH__ >= 6 .macro bitop, name, instr @@ -26,7 +25,6 @@ UNWIND( .fnstart ) bx lr UNWIND( .fnend ) ENDPROC(\name ) -EXPORT_SYMBOL(\name ) .endm .macro testop, name, instr, store @@ -57,7 +55,6 @@ UNWIND( .fnstart ) 2: bx lr UNWIND( .fnend ) ENDPROC(\name ) -EXPORT_SYMBOL(\name ) .endm #else .macro bitop, name, instr @@ -77,7 +74,6 @@ UNWIND( .fnstart ) ret lr UNWIND( .fnend ) ENDPROC(\name ) -EXPORT_SYMBOL(\name ) .endm /** @@ -106,6 +102,5 @@ UNWIND( .fnstart ) ret lr UNWIND( .fnend ) ENDPROC(\name ) -EXPORT_SYMBOL(\name ) .endm #endif diff --git a/arch/arm/lib/bswapsdi2.S b/arch/arm/lib/bswapsdi2.S index f05f78247304..07cda737bb11 100644 --- a/arch/arm/lib/bswapsdi2.S +++ b/arch/arm/lib/bswapsdi2.S @@ -1,6 +1,5 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> #if __LINUX_ARM_ARCH__ >= 6 ENTRY(__bswapsi2) @@ -36,5 +35,3 @@ ENTRY(__bswapdi2) ret lr ENDPROC(__bswapdi2) #endif -EXPORT_SYMBOL(__bswapsi2) -EXPORT_SYMBOL(__bswapdi2) diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S index b566154f5cf4..e936352ccb00 100644 --- a/arch/arm/lib/clear_user.S +++ b/arch/arm/lib/clear_user.S @@ -10,7 +10,6 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/unwind.h> -#include <asm/export.h> .text @@ -51,9 +50,6 @@ USER( strnebt r2, [r0]) UNWIND(.fnend) ENDPROC(arm_clear_user) ENDPROC(__clear_user_std) -#ifndef CONFIG_UACCESS_WITH_MEMCPY -EXPORT_SYMBOL(arm_clear_user) -#endif .pushsection .text.fixup,"ax" .align 0 diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S index 63e4c1ed0225..7a4b06049001 100644 --- a/arch/arm/lib/copy_from_user.S +++ b/arch/arm/lib/copy_from_user.S @@ -13,7 +13,6 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/unwind.h> -#include <asm/export.h> /* * Prototype: @@ -95,7 +94,6 @@ ENTRY(arm_copy_from_user) #include "copy_template.S" ENDPROC(arm_copy_from_user) -EXPORT_SYMBOL(arm_copy_from_user) .pushsection .fixup,"ax" .align 0 diff --git a/arch/arm/lib/copy_page.S b/arch/arm/lib/copy_page.S index d97851d4af7a..6ee2f6706f86 100644 --- a/arch/arm/lib/copy_page.S +++ b/arch/arm/lib/copy_page.S @@ -13,7 +13,6 @@ #include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/cache.h> -#include <asm/export.h> #define COPY_COUNT (PAGE_SZ / (2 * L1_CACHE_BYTES) PLD( -1 )) @@ -46,4 +45,3 @@ ENTRY(copy_page) PLD( beq 2b ) ldmfd sp!, {r4, pc} @ 3 ENDPROC(copy_page) -EXPORT_SYMBOL(copy_page) diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S index 592c179112d1..caf5019d8161 100644 --- a/arch/arm/lib/copy_to_user.S +++ b/arch/arm/lib/copy_to_user.S @@ -13,7 +13,6 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/unwind.h> -#include <asm/export.h> /* * Prototype: @@ -100,9 +99,6 @@ WEAK(arm_copy_to_user) ENDPROC(arm_copy_to_user) ENDPROC(__copy_to_user_std) -#ifndef CONFIG_UACCESS_WITH_MEMCPY -EXPORT_SYMBOL(arm_copy_to_user) -#endif .pushsection .text.fixup,"ax" .align 0 diff --git a/arch/arm/lib/csumipv6.S b/arch/arm/lib/csumipv6.S index 68603b5ee537..3ac6ef01bc43 100644 --- a/arch/arm/lib/csumipv6.S +++ b/arch/arm/lib/csumipv6.S @@ -9,7 +9,6 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> .text @@ -31,4 +30,4 @@ ENTRY(__csum_ipv6_magic) adcs r0, r0, #0 ldmfd sp!, {pc} ENDPROC(__csum_ipv6_magic) -EXPORT_SYMBOL(__csum_ipv6_magic) + diff --git a/arch/arm/lib/csumpartial.S b/arch/arm/lib/csumpartial.S index 830b20e81c37..984e0f29d548 100644 --- a/arch/arm/lib/csumpartial.S +++ b/arch/arm/lib/csumpartial.S @@ -9,7 +9,6 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> .text @@ -141,4 +140,3 @@ ENTRY(csum_partial) bne 4b b .Lless4 ENDPROC(csum_partial) -EXPORT_SYMBOL(csum_partial) diff --git a/arch/arm/lib/csumpartialcopy.S b/arch/arm/lib/csumpartialcopy.S index 9c3383fed129..d03fc71fc88c 100644 --- a/arch/arm/lib/csumpartialcopy.S +++ b/arch/arm/lib/csumpartialcopy.S @@ -49,6 +49,5 @@ #define FN_ENTRY ENTRY(csum_partial_copy_nocheck) #define FN_EXIT ENDPROC(csum_partial_copy_nocheck) -#define FN_EXPORT EXPORT_SYMBOL(csum_partial_copy_nocheck) #include "csumpartialcopygeneric.S" diff --git a/arch/arm/lib/csumpartialcopygeneric.S b/arch/arm/lib/csumpartialcopygeneric.S index 8b94d20e51d1..10b45909610c 100644 --- a/arch/arm/lib/csumpartialcopygeneric.S +++ b/arch/arm/lib/csumpartialcopygeneric.S @@ -8,7 +8,6 @@ * published by the Free Software Foundation. */ #include <asm/assembler.h> -#include <asm/export.h> /* * unsigned int @@ -332,4 +331,3 @@ FN_ENTRY mov r5, r4, get_byte_1 b .Lexit FN_EXIT -FN_EXPORT diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S index 5d495edf3d83..1712f132b80d 100644 --- a/arch/arm/lib/csumpartialcopyuser.S +++ b/arch/arm/lib/csumpartialcopyuser.S @@ -73,7 +73,6 @@ #define FN_ENTRY ENTRY(csum_partial_copy_from_user) #define FN_EXIT ENDPROC(csum_partial_copy_from_user) -#define FN_EXPORT EXPORT_SYMBOL(csum_partial_copy_from_user) #include "csumpartialcopygeneric.S" diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 69aad80a3af4..2cef11884857 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -24,7 +24,6 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/export.h> #include <linux/timex.h> /* @@ -35,7 +34,6 @@ struct arm_delay_ops arm_delay_ops __ro_after_init = { .const_udelay = __loop_const_udelay, .udelay = __loop_udelay, }; -EXPORT_SYMBOL(arm_delay_ops); static const struct delay_timer *delay_timer; static bool delay_calibrated; diff --git a/arch/arm/lib/div64.S b/arch/arm/lib/div64.S index 0c9e1c18fc9e..a9eafe4981eb 100644 --- a/arch/arm/lib/div64.S +++ b/arch/arm/lib/div64.S @@ -15,7 +15,6 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/unwind.h> -#include <asm/export.h> #ifdef __ARMEB__ #define xh r0 @@ -211,4 +210,3 @@ Ldiv0_64: UNWIND(.fnend) ENDPROC(__do_div64) -EXPORT_SYMBOL(__do_div64) diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S index 26302b8cd38f..7848780e8834 100644 --- a/arch/arm/lib/findbit.S +++ b/arch/arm/lib/findbit.S @@ -15,7 +15,6 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> .text /* @@ -38,7 +37,6 @@ ENTRY(_find_first_zero_bit_le) 3: mov r0, r1 @ no free bits ret lr ENDPROC(_find_first_zero_bit_le) -EXPORT_SYMBOL(_find_first_zero_bit_le) /* * Purpose : Find next 'zero' bit @@ -59,7 +57,6 @@ ENTRY(_find_next_zero_bit_le) add r2, r2, #1 @ align bit pointer b 2b @ loop for next bit ENDPROC(_find_next_zero_bit_le) -EXPORT_SYMBOL(_find_next_zero_bit_le) /* * Purpose : Find a 'one' bit @@ -81,7 +78,6 @@ ENTRY(_find_first_bit_le) 3: mov r0, r1 @ no free bits ret lr ENDPROC(_find_first_bit_le) -EXPORT_SYMBOL(_find_first_bit_le) /* * Purpose : Find next 'one' bit @@ -101,7 +97,6 @@ ENTRY(_find_next_bit_le) add r2, r2, #1 @ align bit pointer b 2b @ loop for next bit ENDPROC(_find_next_bit_le) -EXPORT_SYMBOL(_find_next_bit_le) #ifdef __ARMEB__ @@ -121,7 +116,6 @@ ENTRY(_find_first_zero_bit_be) 3: mov r0, r1 @ no free bits ret lr ENDPROC(_find_first_zero_bit_be) -EXPORT_SYMBOL(_find_first_zero_bit_be) ENTRY(_find_next_zero_bit_be) teq r1, #0 @@ -139,7 +133,6 @@ ENTRY(_find_next_zero_bit_be) add r2, r2, #1 @ align bit pointer b 2b @ loop for next bit ENDPROC(_find_next_zero_bit_be) -EXPORT_SYMBOL(_find_next_zero_bit_be) ENTRY(_find_first_bit_be) teq r1, #0 @@ -157,7 +150,6 @@ ENTRY(_find_first_bit_be) 3: mov r0, r1 @ no free bits ret lr ENDPROC(_find_first_bit_be) -EXPORT_SYMBOL(_find_first_bit_be) ENTRY(_find_next_bit_be) teq r1, #0 @@ -174,7 +166,6 @@ ENTRY(_find_next_bit_be) add r2, r2, #1 @ align bit pointer b 2b @ loop for next bit ENDPROC(_find_next_bit_be) -EXPORT_SYMBOL(_find_next_bit_be) #endif diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 9d09a38e73af..8ecfd15c3a02 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -31,7 +31,6 @@ #include <asm/assembler.h> #include <asm/errno.h> #include <asm/domain.h> -#include <asm/export.h> ENTRY(__get_user_1) check_uaccess r0, 1, r1, r2, __get_user_bad @@ -39,7 +38,6 @@ ENTRY(__get_user_1) mov r0, #0 ret lr ENDPROC(__get_user_1) -EXPORT_SYMBOL(__get_user_1) ENTRY(__get_user_2) check_uaccess r0, 2, r1, r2, __get_user_bad @@ -60,7 +58,6 @@ rb .req r0 mov r0, #0 ret lr ENDPROC(__get_user_2) -EXPORT_SYMBOL(__get_user_2) ENTRY(__get_user_4) check_uaccess r0, 4, r1, r2, __get_user_bad @@ -68,7 +65,6 @@ ENTRY(__get_user_4) mov r0, #0 ret lr ENDPROC(__get_user_4) -EXPORT_SYMBOL(__get_user_4) ENTRY(__get_user_8) check_uaccess r0, 8, r1, r2, __get_user_bad @@ -82,7 +78,6 @@ ENTRY(__get_user_8) mov r0, #0 ret lr ENDPROC(__get_user_8) -EXPORT_SYMBOL(__get_user_8) #ifdef __ARMEB__ ENTRY(__get_user_32t_8) @@ -96,7 +91,6 @@ ENTRY(__get_user_32t_8) mov r0, #0 ret lr ENDPROC(__get_user_32t_8) -EXPORT_SYMBOL(__get_user_32t_8) ENTRY(__get_user_64t_1) check_uaccess r0, 1, r1, r2, __get_user_bad8 @@ -104,7 +98,6 @@ ENTRY(__get_user_64t_1) mov r0, #0 ret lr ENDPROC(__get_user_64t_1) -EXPORT_SYMBOL(__get_user_64t_1) ENTRY(__get_user_64t_2) check_uaccess r0, 2, r1, r2, __get_user_bad8 @@ -121,7 +114,6 @@ rb .req r0 mov r0, #0 ret lr ENDPROC(__get_user_64t_2) -EXPORT_SYMBOL(__get_user_64t_2) ENTRY(__get_user_64t_4) check_uaccess r0, 4, r1, r2, __get_user_bad8 @@ -129,7 +121,6 @@ ENTRY(__get_user_64t_4) mov r0, #0 ret lr ENDPROC(__get_user_64t_4) -EXPORT_SYMBOL(__get_user_64t_4) #endif __get_user_bad8: diff --git a/arch/arm/lib/io-readsb.S b/arch/arm/lib/io-readsb.S index 3dff7a3a2aef..c31b2f3153f1 100644 --- a/arch/arm/lib/io-readsb.S +++ b/arch/arm/lib/io-readsb.S @@ -9,7 +9,6 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> .Linsb_align: rsb ip, ip, #4 cmp ip, r2 @@ -122,4 +121,3 @@ ENTRY(__raw_readsb) ldmfd sp!, {r4 - r6, pc} ENDPROC(__raw_readsb) -EXPORT_SYMBOL(__raw_readsb) diff --git a/arch/arm/lib/io-readsl.S b/arch/arm/lib/io-readsl.S index bfd39682325b..2ed86fa5465f 100644 --- a/arch/arm/lib/io-readsl.S +++ b/arch/arm/lib/io-readsl.S @@ -9,7 +9,6 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> ENTRY(__raw_readsl) teq r2, #0 @ do we have to check for the zero len? @@ -78,4 +77,3 @@ ENTRY(__raw_readsl) strb r3, [r1, #0] ret lr ENDPROC(__raw_readsl) -EXPORT_SYMBOL(__raw_readsl) diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S index b3af3db6caac..413da9914529 100644 --- a/arch/arm/lib/io-readsw-armv3.S +++ b/arch/arm/lib/io-readsw-armv3.S @@ -9,7 +9,6 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> .Linsw_bad_alignment: adr r0, .Linsw_bad_align_msg @@ -104,4 +103,4 @@ ENTRY(__raw_readsw) ldmfd sp!, {r4, r5, r6, pc} -EXPORT_SYMBOL(__raw_readsw) + diff --git a/arch/arm/lib/io-readsw-armv4.S b/arch/arm/lib/io-readsw-armv4.S index 3c7a7a40b33e..d9a45e9692ae 100644 --- a/arch/arm/lib/io-readsw-armv4.S +++ b/arch/arm/lib/io-readsw-armv4.S @@ -9,7 +9,6 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> .macro pack, rd, hw1, hw2 #ifndef __ARMEB__ @@ -130,4 +129,3 @@ ENTRY(__raw_readsw) strneb ip, [r1] ldmfd sp!, {r4, pc} ENDPROC(__raw_readsw) -EXPORT_SYMBOL(__raw_readsw) diff --git a/arch/arm/lib/io-writesb.S b/arch/arm/lib/io-writesb.S index fa3633594415..a46bbc9b168b 100644 --- a/arch/arm/lib/io-writesb.S +++ b/arch/arm/lib/io-writesb.S @@ -9,7 +9,6 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> .macro outword, rd #ifndef __ARMEB__ @@ -93,4 +92,3 @@ ENTRY(__raw_writesb) ldmfd sp!, {r4, r5, pc} ENDPROC(__raw_writesb) -EXPORT_SYMBOL(__raw_writesb) diff --git a/arch/arm/lib/io-writesl.S b/arch/arm/lib/io-writesl.S index 98ed6aec0b47..4ea2435988c1 100644 --- a/arch/arm/lib/io-writesl.S +++ b/arch/arm/lib/io-writesl.S @@ -9,7 +9,6 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> ENTRY(__raw_writesl) teq r2, #0 @ do we have to check for the zero len? @@ -66,4 +65,3 @@ ENTRY(__raw_writesl) bne 6b ret lr ENDPROC(__raw_writesl) -EXPORT_SYMBOL(__raw_writesl) diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S index 577184c082bb..121789eb6802 100644 --- a/arch/arm/lib/io-writesw-armv3.S +++ b/arch/arm/lib/io-writesw-armv3.S @@ -9,7 +9,6 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> .Loutsw_bad_alignment: adr r0, .Loutsw_bad_align_msg @@ -125,4 +124,3 @@ ENTRY(__raw_writesw) strne ip, [r0] ldmfd sp!, {r4, r5, r6, pc} -EXPORT_SYMBOL(__raw_writesw) diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S index e335f489d1fc..269f90c51ad2 100644 --- a/arch/arm/lib/io-writesw-armv4.S +++ b/arch/arm/lib/io-writesw-armv4.S @@ -9,7 +9,6 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> .macro outword, rd #ifndef __ARMEB__ @@ -99,4 +98,3 @@ ENTRY(__raw_writesw) strneh ip, [r0] ret lr ENDPROC(__raw_writesw) -EXPORT_SYMBOL(__raw_writesw) diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S index f541bc013bff..9397b2e532af 100644 --- a/arch/arm/lib/lib1funcs.S +++ b/arch/arm/lib/lib1funcs.S @@ -36,7 +36,6 @@ Boston, MA 02111-1307, USA. */ #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/unwind.h> -#include <asm/export.h> .macro ARM_DIV_BODY dividend, divisor, result, curbit @@ -239,8 +238,6 @@ UNWIND(.fnstart) UNWIND(.fnend) ENDPROC(__udivsi3) ENDPROC(__aeabi_uidiv) -EXPORT_SYMBOL(__udivsi3) -EXPORT_SYMBOL(__aeabi_uidiv) ENTRY(__umodsi3) UNWIND(.fnstart) @@ -259,7 +256,6 @@ UNWIND(.fnstart) UNWIND(.fnend) ENDPROC(__umodsi3) -EXPORT_SYMBOL(__umodsi3) #ifdef CONFIG_ARM_PATCH_IDIV .align 3 @@ -307,8 +303,6 @@ UNWIND(.fnstart) UNWIND(.fnend) ENDPROC(__divsi3) ENDPROC(__aeabi_idiv) -EXPORT_SYMBOL(__divsi3) -EXPORT_SYMBOL(__aeabi_idiv) ENTRY(__modsi3) UNWIND(.fnstart) @@ -333,7 +327,6 @@ UNWIND(.fnstart) UNWIND(.fnend) ENDPROC(__modsi3) -EXPORT_SYMBOL(__modsi3) #ifdef CONFIG_AEABI @@ -350,7 +343,6 @@ UNWIND(.save {r0, r1, ip, lr} ) UNWIND(.fnend) ENDPROC(__aeabi_uidivmod) -EXPORT_SYMBOL(__aeabi_uidivmod) ENTRY(__aeabi_idivmod) UNWIND(.fnstart) @@ -364,7 +356,6 @@ UNWIND(.save {r0, r1, ip, lr} ) UNWIND(.fnend) ENDPROC(__aeabi_idivmod) -EXPORT_SYMBOL(__aeabi_idivmod) #endif diff --git a/arch/arm/lib/lshrdi3.S b/arch/arm/lib/lshrdi3.S index e40833981417..922dcd88b02b 100644 --- a/arch/arm/lib/lshrdi3.S +++ b/arch/arm/lib/lshrdi3.S @@ -28,7 +28,6 @@ Boston, MA 02110-1301, USA. */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> #ifdef __ARMEB__ #define al r1 @@ -53,5 +52,3 @@ ENTRY(__aeabi_llsr) ENDPROC(__lshrdi3) ENDPROC(__aeabi_llsr) -EXPORT_SYMBOL(__lshrdi3) -EXPORT_SYMBOL(__aeabi_llsr) diff --git a/arch/arm/lib/memchr.S b/arch/arm/lib/memchr.S index 44182bf686a5..74a5bed6d999 100644 --- a/arch/arm/lib/memchr.S +++ b/arch/arm/lib/memchr.S @@ -11,7 +11,6 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> .text .align 5 @@ -25,4 +24,3 @@ ENTRY(memchr) 2: movne r0, #0 ret lr ENDPROC(memchr) -EXPORT_SYMBOL(memchr) diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S index 1be5b6ddf37c..64111bd4440b 100644 --- a/arch/arm/lib/memcpy.S +++ b/arch/arm/lib/memcpy.S @@ -13,7 +13,6 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/unwind.h> -#include <asm/export.h> #define LDR1W_SHIFT 0 #define STR1W_SHIFT 0 @@ -69,5 +68,3 @@ ENTRY(memcpy) ENDPROC(memcpy) ENDPROC(mmiocpy) -EXPORT_SYMBOL(memcpy) -EXPORT_SYMBOL(mmiocpy) diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S index 71dcc5400d02..69a9d47fc5ab 100644 --- a/arch/arm/lib/memmove.S +++ b/arch/arm/lib/memmove.S @@ -13,7 +13,6 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/unwind.h> -#include <asm/export.h> .text @@ -226,4 +225,3 @@ ENTRY(memmove) 18: backward_copy_shift push=24 pull=8 ENDPROC(memmove) -EXPORT_SYMBOL(memmove) diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S index 7b72044cba62..3c65e3bd790f 100644 --- a/arch/arm/lib/memset.S +++ b/arch/arm/lib/memset.S @@ -12,7 +12,6 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/unwind.h> -#include <asm/export.h> .text .align 5 @@ -136,5 +135,3 @@ UNWIND( .fnstart ) UNWIND( .fnend ) ENDPROC(memset) ENDPROC(mmioset) -EXPORT_SYMBOL(memset) -EXPORT_SYMBOL(mmioset) diff --git a/arch/arm/lib/memzero.S b/arch/arm/lib/memzero.S index 6dec26ed5bcc..0eded952e089 100644 --- a/arch/arm/lib/memzero.S +++ b/arch/arm/lib/memzero.S @@ -10,7 +10,6 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/unwind.h> -#include <asm/export.h> .text .align 5 @@ -136,4 +135,3 @@ UNWIND( .fnstart ) ret lr @ 1 UNWIND( .fnend ) ENDPROC(__memzero) -EXPORT_SYMBOL(__memzero) diff --git a/arch/arm/lib/muldi3.S b/arch/arm/lib/muldi3.S index b8f12388ccac..204305956925 100644 --- a/arch/arm/lib/muldi3.S +++ b/arch/arm/lib/muldi3.S @@ -12,7 +12,6 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> #ifdef __ARMEB__ #define xh r0 @@ -47,5 +46,3 @@ ENTRY(__aeabi_lmul) ENDPROC(__muldi3) ENDPROC(__aeabi_lmul) -EXPORT_SYMBOL(__muldi3) -EXPORT_SYMBOL(__aeabi_lmul) diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 11de126e2ed6..38d660d3705f 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -31,7 +31,6 @@ #include <asm/assembler.h> #include <asm/errno.h> #include <asm/domain.h> -#include <asm/export.h> ENTRY(__put_user_1) check_uaccess r0, 1, r1, ip, __put_user_bad @@ -39,7 +38,6 @@ ENTRY(__put_user_1) mov r0, #0 ret lr ENDPROC(__put_user_1) -EXPORT_SYMBOL(__put_user_1) ENTRY(__put_user_2) check_uaccess r0, 2, r1, ip, __put_user_bad @@ -64,7 +62,6 @@ ENTRY(__put_user_2) mov r0, #0 ret lr ENDPROC(__put_user_2) -EXPORT_SYMBOL(__put_user_2) ENTRY(__put_user_4) check_uaccess r0, 4, r1, ip, __put_user_bad @@ -72,7 +69,6 @@ ENTRY(__put_user_4) mov r0, #0 ret lr ENDPROC(__put_user_4) -EXPORT_SYMBOL(__put_user_4) ENTRY(__put_user_8) check_uaccess r0, 8, r1, ip, __put_user_bad @@ -86,7 +82,6 @@ ENTRY(__put_user_8) mov r0, #0 ret lr ENDPROC(__put_user_8) -EXPORT_SYMBOL(__put_user_8) __put_user_bad: mov r0, #-EFAULT diff --git a/arch/arm/lib/strchr.S b/arch/arm/lib/strchr.S index 7301f6e6046c..013d64c71e8d 100644 --- a/arch/arm/lib/strchr.S +++ b/arch/arm/lib/strchr.S @@ -11,7 +11,6 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> .text .align 5 @@ -26,4 +25,3 @@ ENTRY(strchr) subeq r0, r0, #1 ret lr ENDPROC(strchr) -EXPORT_SYMBOL(strchr) diff --git a/arch/arm/lib/strrchr.S b/arch/arm/lib/strrchr.S index aaf9fd98b754..3cec1c7482c4 100644 --- a/arch/arm/lib/strrchr.S +++ b/arch/arm/lib/strrchr.S @@ -11,7 +11,6 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> .text .align 5 @@ -25,4 +24,3 @@ ENTRY(strrchr) mov r0, r3 ret lr ENDPROC(strrchr) -EXPORT_SYMBOL(strrchr) diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index 1626e3a551a1..6bd1089b07e0 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -19,7 +19,6 @@ #include <linux/gfp.h> #include <linux/highmem.h> #include <linux/hugetlb.h> -#include <linux/export.h> #include <asm/current.h> #include <asm/page.h> @@ -157,7 +156,6 @@ arm_copy_to_user(void __user *to, const void *from, unsigned long n) } return n; } -EXPORT_SYMBOL(arm_copy_to_user); static unsigned long noinline __clear_user_memset(void __user *addr, unsigned long n) @@ -215,7 +213,6 @@ unsigned long arm_clear_user(void __user *addr, unsigned long n) } return n; } -EXPORT_SYMBOL(arm_clear_user); #if 0 diff --git a/arch/arm/lib/ucmpdi2.S b/arch/arm/lib/ucmpdi2.S index 127a91af46f3..ad4a6309141a 100644 --- a/arch/arm/lib/ucmpdi2.S +++ b/arch/arm/lib/ucmpdi2.S @@ -12,7 +12,6 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> #ifdef __ARMEB__ #define xh r0 @@ -36,7 +35,6 @@ ENTRY(__ucmpdi2) ret lr ENDPROC(__ucmpdi2) -EXPORT_SYMBOL(__ucmpdi2) #ifdef CONFIG_AEABI @@ -50,7 +48,6 @@ ENTRY(__aeabi_ulcmp) ret lr ENDPROC(__aeabi_ulcmp) -EXPORT_SYMBOL(__aeabi_ulcmp) #endif diff --git a/arch/arm/mach-artpec/Kconfig b/arch/arm/mach-artpec/Kconfig index 6cbe5a2eabab..85a962abb77f 100644 --- a/arch/arm/mach-artpec/Kconfig +++ b/arch/arm/mach-artpec/Kconfig @@ -14,6 +14,7 @@ config MACH_ARTPEC6 select HAVE_ARM_ARCH_TIMER select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP + select MFD_SYSCON help Support for Axis ARTPEC-6 ARM Cortex A9 Platform diff --git a/arch/arm/mach-bcm/bcm_5301x.c b/arch/arm/mach-bcm/bcm_5301x.c index c8830a2b0d60..fe067f6cebb6 100644 --- a/arch/arm/mach-bcm/bcm_5301x.c +++ b/arch/arm/mach-bcm/bcm_5301x.c @@ -9,14 +9,42 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> +#include <asm/siginfo.h> +#include <asm/signal.h> + +#define FSR_EXTERNAL (1 << 12) +#define FSR_READ (0 << 10) +#define FSR_IMPRECISE 0x0406 static const char *const bcm5301x_dt_compat[] __initconst = { "brcm,bcm4708", NULL, }; +static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr, + struct pt_regs *regs) +{ + /* + * We want to ignore aborts forwarded from the PCIe bus that are + * expected and shouldn't really be passed by the PCIe controller. + * The biggest disadvantage is the same FSR code may be reported when + * reading non-existing APB register and we shouldn't ignore that. + */ + if (fsr == (FSR_EXTERNAL | FSR_READ | FSR_IMPRECISE)) + return 0; + + return 1; +} + +static void __init bcm5301x_init_early(void) +{ + hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR, + "imprecise external abort"); +} + DT_MACHINE_START(BCM5301X, "BCM5301X") .l2c_aux_val = 0, .l2c_aux_mask = ~0, .dt_compat = bcm5301x_dt_compat, + .init_early = bcm5301x_init_early, MACHINE_END diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index da4c336b4637..0a2e6da45f28 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -36,5 +36,7 @@ obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD) += board-omapl138-hawk.o # Power Management obj-$(CONFIG_CPU_IDLE) += cpuidle.o -obj-$(CONFIG_SUSPEND) += pm.o sleep.o obj-$(CONFIG_HAVE_CLK) += pm_domain.o +ifeq ($(CONFIG_SUSPEND),y) +obj-$(CONFIG_ARCH_DAVINCI_DA850) += pm.o sleep.o +endif diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 3d8cf8cbd98a..58075627c6df 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -14,6 +14,7 @@ #include <linux/console.h> #include <linux/interrupt.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/i2c/pcf857x.h> @@ -27,6 +28,7 @@ #include <linux/platform_data/mtd-davinci-aemif.h> #include <linux/platform_data/spi-davinci.h> #include <linux/platform_data/usb-davinci.h> +#include <linux/regulator/machine.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -106,43 +108,24 @@ static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id) static __init void da830_evm_usb_init(void) { - u32 cfgchip2; int ret; - /* - * Set up USB clock/mode in the CFGCHIP2 register. - * FYI: CFGCHIP2 is 0x0000ef00 initially. - */ - cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - /* USB2.0 PHY reference clock is 24 MHz */ - cfgchip2 &= ~CFGCHIP2_REFFREQ; - cfgchip2 |= CFGCHIP2_REFFREQ_24MHZ; - - /* - * Select internal reference clock for USB 2.0 PHY - * and use it as a clock source for USB 1.1 PHY - * (this is the default setting anyway). - */ - cfgchip2 &= ~CFGCHIP2_USB1PHYCLKMUX; - cfgchip2 |= CFGCHIP2_USB2PHYCLKMUX; - - /* - * We have to override VBUS/ID signals when MUSB is configured into the - * host-only mode -- ID pin will float if no cable is connected, so the - * controller won't be able to drive VBUS thinking that it's a B-device. - * Otherwise, we want to use the OTG mode and enable VBUS comparators. - */ - cfgchip2 &= ~CFGCHIP2_OTGMODE; -#ifdef CONFIG_USB_MUSB_HOST - cfgchip2 |= CFGCHIP2_FORCE_HOST; -#else - cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN; -#endif + /* USB_REFCLKIN is not used. */ + ret = da8xx_register_usb20_phy_clk(false); + if (ret) + pr_warn("%s: USB 2.0 PHY CLK registration failed: %d\n", + __func__, ret); - __raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); + ret = da8xx_register_usb11_phy_clk(false); + if (ret) + pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n", + __func__, ret); + + ret = da8xx_register_usb_phy(); + if (ret) + pr_warn("%s: USB PHY registration failed: %d\n", + __func__, ret); - /* USB_REFCLKIN is not used. */ ret = davinci_cfg_reg(DA830_USB0_DRVVBUS); if (ret) pr_warn("%s: USB 2.0 PinMux setup failed: %d\n", __func__, ret); @@ -222,22 +205,16 @@ static const short da830_evm_mmc_sd_pins[] = { -1 }; -#define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1) -#define DA830_MMCSD_CD_PIN GPIO_TO_PIN(2, 2) - -static int da830_evm_mmc_get_ro(int index) -{ - return gpio_get_value(DA830_MMCSD_WP_PIN); -} - -static int da830_evm_mmc_get_cd(int index) -{ - return !gpio_get_value(DA830_MMCSD_CD_PIN); -} +static struct gpiod_lookup_table mmc_gpios_table = { + .dev_id = "da830-mmc.0", + .table = { + /* gpio chip 1 contains gpio range 32-63 */ + GPIO_LOOKUP("davinci_gpio.1", 2, "cd", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("davinci_gpio.1", 1, "wp", GPIO_ACTIVE_LOW), + }, +}; static struct davinci_mmc_config da830_evm_mmc_config = { - .get_ro = da830_evm_mmc_get_ro, - .get_cd = da830_evm_mmc_get_cd, .wires = 8, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, @@ -253,26 +230,12 @@ static inline void da830_evm_init_mmc(void) return; } - ret = gpio_request(DA830_MMCSD_WP_PIN, "MMC WP"); - if (ret) { - pr_warn("%s: can not open GPIO %d\n", - __func__, DA830_MMCSD_WP_PIN); - return; - } - gpio_direction_input(DA830_MMCSD_WP_PIN); - - ret = gpio_request(DA830_MMCSD_CD_PIN, "MMC CD\n"); - if (ret) { - pr_warn("%s: can not open GPIO %d\n", - __func__, DA830_MMCSD_CD_PIN); - return; - } - gpio_direction_input(DA830_MMCSD_CD_PIN); + gpiod_add_lookup_table(&mmc_gpios_table); ret = da8xx_register_mmcsd0(&da830_evm_mmc_config); if (ret) { pr_warn("%s: mmc/sd registration failed: %d\n", __func__, ret); - gpio_free(DA830_MMCSD_WP_PIN); + gpiod_remove_lookup_table(&mmc_gpios_table); } } @@ -588,6 +551,10 @@ static __init void da830_evm_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; int ret; + ret = da8xx_register_cfgchip(); + if (ret) + pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret); + ret = da830_register_gpio(); if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); @@ -647,6 +614,8 @@ static __init void da830_evm_init(void) ret = da8xx_register_spi_bus(0, ARRAY_SIZE(da830evm_spi_info)); if (ret) pr_warn("%s: spi 0 registration failed: %d\n", __func__, ret); + + regulator_has_full_constraints(); } #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 8e4539f69fdc..aac3ab1a044f 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -15,6 +15,7 @@ #include <linux/delay.h> #include <linux/gpio.h> #include <linux/gpio_keys.h> +#include <linux/gpio/machine.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/i2c.h> @@ -56,9 +57,6 @@ #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) #define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15) -#define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0) -#define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1) - #define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6) static struct mtd_partition da850evm_spiflash_part[] = { @@ -196,18 +194,6 @@ static struct platform_device da850_evm_norflash_device = { .resource = da850_evm_norflash_resource, }; -static struct davinci_pm_config da850_pm_pdata = { - .sleepcount = 128, -}; - -static struct platform_device da850_pm_device = { - .name = "pm-davinci", - .dev = { - .platform_data = &da850_pm_pdata, - }, - .id = -1, -}; - /* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash * (128K blocks). It may be used instead of the (default) SPI flash * to boot, using TI's tools to install the secondary boot loader @@ -776,19 +762,16 @@ static const short da850_evm_mcasp_pins[] __initconst = { -1 }; -static int da850_evm_mmc_get_ro(int index) -{ - return gpio_get_value(DA850_MMCSD_WP_PIN); -} - -static int da850_evm_mmc_get_cd(int index) -{ - return !gpio_get_value(DA850_MMCSD_CD_PIN); -} +static struct gpiod_lookup_table mmc_gpios_table = { + .dev_id = "da830-mmc.0", + .table = { + /* gpio chip 2 contains gpio range 64-95 */ + GPIO_LOOKUP("davinci_gpio.2", 0, "cd", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("davinci_gpio.2", 1, "wp", GPIO_ACTIVE_LOW), + }, +}; static struct davinci_mmc_config da850_mmc_config = { - .get_ro = da850_evm_mmc_get_ro, - .get_cd = da850_evm_mmc_get_cd, .wires = 4, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, @@ -1345,6 +1328,10 @@ static __init void da850_evm_init(void) { int ret; + ret = da8xx_register_cfgchip(); + if (ret) + pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret); + ret = da850_register_gpio(); if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); @@ -1379,17 +1366,7 @@ static __init void da850_evm_init(void) pr_warn("%s: MMCSD0 mux setup failed: %d\n", __func__, ret); - ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n"); - if (ret) - pr_warn("%s: can not open GPIO %d\n", - __func__, DA850_MMCSD_CD_PIN); - gpio_direction_input(DA850_MMCSD_CD_PIN); - - ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n"); - if (ret) - pr_warn("%s: can not open GPIO %d\n", - __func__, DA850_MMCSD_WP_PIN); - gpio_direction_input(DA850_MMCSD_WP_PIN); + gpiod_add_lookup_table(&mmc_gpios_table); ret = da8xx_register_mmcsd0(&da850_mmc_config); if (ret) @@ -1453,10 +1430,7 @@ static __init void da850_evm_init(void) if (ret) pr_warn("%s: cpuidle registration failed: %d\n", __func__, ret); - ret = da850_register_pm(&da850_pm_device); - if (ret) - pr_warn("%s: suspend registration failed: %d\n", __func__, ret); - + davinci_pm_init(); da850_vpif_init(); ret = spi_register_board_info(da850evm_spi_info, diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index bc4e63fa9808..b73ce7bae81f 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -498,22 +498,14 @@ static void __init mityomapl138_config_emac(void) pr_warn("emac registration failed: %d\n", ret); } -static struct davinci_pm_config da850_pm_pdata = { - .sleepcount = 128, -}; - -static struct platform_device da850_pm_device = { - .name = "pm-davinci", - .dev = { - .platform_data = &da850_pm_pdata, - }, - .id = -1, -}; - static void __init mityomapl138_init(void) { int ret; + ret = da8xx_register_cfgchip(); + if (ret) + pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret); + /* for now, no special EDMA channels are reserved */ ret = da850_register_edma(NULL); if (ret) @@ -555,9 +547,7 @@ static void __init mityomapl138_init(void) if (ret) pr_warn("cpuidle registration failed: %d\n", ret); - ret = da850_register_pm(&da850_pm_device); - if (ret) - pr_warn("suspend registration failed: %d\n", ret); + davinci_pm_init(); } #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index ee624861ca66..41d5500996b2 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -13,7 +13,9 @@ #include <linux/init.h> #include <linux/console.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/platform_data/gpio-davinci.h> +#include <linux/regulator/machine.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -24,8 +26,6 @@ #include <mach/mux.h> #define HAWKBOARD_PHY_ID "davinci_mdio-0:07" -#define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12) -#define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13) #define DA850_USB1_VBUS_PIN GPIO_TO_PIN(2, 4) #define DA850_USB1_OC_PIN GPIO_TO_PIN(6, 13) @@ -122,19 +122,16 @@ static const short hawk_mmcsd0_pins[] = { -1 }; -static int da850_hawk_mmc_get_ro(int index) -{ - return gpio_get_value(DA850_HAWK_MMCSD_WP_PIN); -} - -static int da850_hawk_mmc_get_cd(int index) -{ - return !gpio_get_value(DA850_HAWK_MMCSD_CD_PIN); -} +static struct gpiod_lookup_table mmc_gpios_table = { + .dev_id = "da830-mmc.0", + .table = { + /* CD: gpio3_12: gpio60: chip 1 contains gpio range 32-63*/ + GPIO_LOOKUP("davinci_gpio.1", 28, "cd", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("davinci_gpio.1", 29, "wp", GPIO_ACTIVE_LOW), + }, +}; static struct davinci_mmc_config da850_mmc_config = { - .get_ro = da850_hawk_mmc_get_ro, - .get_cd = da850_hawk_mmc_get_cd, .wires = 4, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, @@ -150,21 +147,7 @@ static __init void omapl138_hawk_mmc_init(void) return; } - ret = gpio_request_one(DA850_HAWK_MMCSD_CD_PIN, - GPIOF_DIR_IN, "MMC CD"); - if (ret < 0) { - pr_warn("%s: can not open GPIO %d\n", - __func__, DA850_HAWK_MMCSD_CD_PIN); - return; - } - - ret = gpio_request_one(DA850_HAWK_MMCSD_WP_PIN, - GPIOF_DIR_IN, "MMC WP"); - if (ret < 0) { - pr_warn("%s: can not open GPIO %d\n", - __func__, DA850_HAWK_MMCSD_WP_PIN); - goto mmc_setup_wp_fail; - } + gpiod_add_lookup_table(&mmc_gpios_table); ret = da8xx_register_mmcsd0(&da850_mmc_config); if (ret) { @@ -175,9 +158,7 @@ static __init void omapl138_hawk_mmc_init(void) return; mmc_setup_mmcsd_fail: - gpio_free(DA850_HAWK_MMCSD_WP_PIN); -mmc_setup_wp_fail: - gpio_free(DA850_HAWK_MMCSD_CD_PIN); + gpiod_remove_lookup_table(&mmc_gpios_table); } static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id); @@ -243,7 +224,6 @@ static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id) static __init void omapl138_hawk_usb_init(void) { int ret; - u32 cfgchip2; ret = davinci_cfg_reg_list(da850_hawk_usb11_pins); if (ret) { @@ -251,12 +231,20 @@ static __init void omapl138_hawk_usb_init(void) return; } - /* Setup the Ref. clock frequency for the HAWK at 24 MHz. */ + ret = da8xx_register_usb20_phy_clk(false); + if (ret) + pr_warn("%s: USB 2.0 PHY CLK registration failed: %d\n", + __func__, ret); - cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - cfgchip2 &= ~CFGCHIP2_REFFREQ; - cfgchip2 |= CFGCHIP2_REFFREQ_24MHZ; - __raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); + ret = da8xx_register_usb11_phy_clk(false); + if (ret) + pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n", + __func__, ret); + + ret = da8xx_register_usb_phy(); + if (ret) + pr_warn("%s: USB PHY registration failed: %d\n", + __func__, ret); ret = gpio_request_one(DA850_USB1_VBUS_PIN, GPIOF_DIR_OUT, "USB1 VBUS"); @@ -292,6 +280,10 @@ static __init void omapl138_hawk_init(void) { int ret; + ret = da8xx_register_cfgchip(); + if (ret) + pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret); + ret = da850_register_gpio(); if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); @@ -317,6 +309,8 @@ static __init void omapl138_hawk_init(void) if (ret) pr_warn("%s: dsp/rproc registration failed: %d\n", __func__, ret); + + regulator_has_full_constraints(); } #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index 049025f6d531..9f9fbfa6da0d 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -118,6 +118,5 @@ err: void __init davinci_init_late(void) { davinci_cpufreq_init(); - davinci_pm_init(); davinci_clk_disable_unused(); } diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 426fd7477357..073c458d0c67 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -412,7 +412,7 @@ static struct clk_lookup da830_clks[] = { CLK("davinci-mcasp.0", NULL, &mcasp0_clk), CLK("davinci-mcasp.1", NULL, &mcasp1_clk), CLK("davinci-mcasp.2", NULL, &mcasp2_clk), - CLK(NULL, "usb20", &usb20_clk), + CLK("musb-da8xx", "usb20", &usb20_clk), CLK(NULL, "aemif", &aemif_clk), CLK(NULL, "aintc", &aintc_clk), CLK(NULL, "secu_mgr", &secu_mgr_clk), @@ -420,7 +420,7 @@ static struct clk_lookup da830_clks[] = { CLK("davinci_mdio.0", "fck", &emac_clk), CLK(NULL, "gpio", &gpio_clk), CLK("i2c_davinci.2", NULL, &i2c1_clk), - CLK(NULL, "usb11", &usb11_clk), + CLK("ohci-da8xx", "usb11", &usb11_clk), CLK(NULL, "emif3", &emif3_clk), CLK(NULL, "arm", &arm_clk), CLK(NULL, "rmii", &rmii_clk), diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index ed3d0e9f72ac..e770c97ea45c 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -424,6 +424,16 @@ static struct clk ehrpwm_clk = { .gpsc = 1, }; +static struct clk ehrpwm0_clk = { + .name = "ehrpwm0", + .parent = &ehrpwm_clk, +}; + +static struct clk ehrpwm1_clk = { + .name = "ehrpwm1", + .parent = &ehrpwm_clk, +}; + #define DA8XX_EHRPWM_TBCLKSYNC BIT(12) static void ehrpwm_tblck_enable(struct clk *clk) @@ -451,6 +461,16 @@ static struct clk ehrpwm_tbclk = { .clk_disable = ehrpwm_tblck_disable, }; +static struct clk ehrpwm0_tbclk = { + .name = "ehrpwm0_tbclk", + .parent = &ehrpwm_tbclk, +}; + +static struct clk ehrpwm1_tbclk = { + .name = "ehrpwm1_tbclk", + .parent = &ehrpwm_tbclk, +}; + static struct clk ecap_clk = { .name = "ecap", .parent = &async3_clk, @@ -458,6 +478,21 @@ static struct clk ecap_clk = { .gpsc = 1, }; +static struct clk ecap0_clk = { + .name = "ecap0_clk", + .parent = &ecap_clk, +}; + +static struct clk ecap1_clk = { + .name = "ecap1_clk", + .parent = &ecap_clk, +}; + +static struct clk ecap2_clk = { + .name = "ecap2_clk", + .parent = &ecap_clk, +}; + static struct clk_lookup da850_clks[] = { CLK(NULL, "ref", &ref_clk), CLK(NULL, "pll0", &pll0_clk), @@ -503,16 +538,23 @@ static struct clk_lookup da850_clks[] = { CLK("da830-mmc.1", NULL, &mmcsd1_clk), CLK("ti-aemif", NULL, &aemif_clk), CLK(NULL, "aemif", &aemif_clk), - CLK(NULL, "usb11", &usb11_clk), - CLK(NULL, "usb20", &usb20_clk), + CLK("ohci-da8xx", "usb11", &usb11_clk), + CLK("musb-da8xx", "usb20", &usb20_clk), CLK("spi_davinci.0", NULL, &spi0_clk), CLK("spi_davinci.1", NULL, &spi1_clk), CLK("vpif", NULL, &vpif_clk), CLK("ahci_da850", NULL, &sata_clk), CLK("davinci-rproc.0", NULL, &dsp_clk), - CLK("ehrpwm", "fck", &ehrpwm_clk), - CLK("ehrpwm", "tbclk", &ehrpwm_tbclk), - CLK("ecap", "fck", &ecap_clk), + CLK(NULL, NULL, &ehrpwm_clk), + CLK("ehrpwm.0", "fck", &ehrpwm0_clk), + CLK("ehrpwm.1", "fck", &ehrpwm1_clk), + CLK(NULL, NULL, &ehrpwm_tbclk), + CLK("ehrpwm.0", "tbclk", &ehrpwm0_tbclk), + CLK("ehrpwm.1", "tbclk", &ehrpwm1_tbclk), + CLK(NULL, NULL, &ecap_clk), + CLK("ecap.0", "fck", &ecap0_clk), + CLK("ecap.1", "fck", &ecap1_clk), + CLK("ecap.2", "fck", &ecap2_clk), CLK(NULL, NULL, NULL), }; @@ -1172,44 +1214,6 @@ static int da850_round_armrate(struct clk *clk, unsigned long rate) } #endif -int __init da850_register_pm(struct platform_device *pdev) -{ - int ret; - struct davinci_pm_config *pdata = pdev->dev.platform_data; - - ret = davinci_cfg_reg(DA850_RTC_ALARM); - if (ret) - return ret; - - pdata->ddr2_ctlr_base = da8xx_get_mem_ctlr(); - pdata->deepsleep_reg = DA8XX_SYSCFG1_VIRT(DA8XX_DEEPSLEEP_REG); - pdata->ddrpsc_num = DA8XX_LPSC1_EMIF3C; - - pdata->cpupll_reg_base = ioremap(DA8XX_PLL0_BASE, SZ_4K); - if (!pdata->cpupll_reg_base) - return -ENOMEM; - - pdata->ddrpll_reg_base = ioremap(DA850_PLL1_BASE, SZ_4K); - if (!pdata->ddrpll_reg_base) { - ret = -ENOMEM; - goto no_ddrpll_mem; - } - - pdata->ddrpsc_reg_base = ioremap(DA8XX_PSC1_BASE, SZ_4K); - if (!pdata->ddrpsc_reg_base) { - ret = -ENOMEM; - goto no_ddrpsc_mem; - } - - return platform_device_register(pdev); - -no_ddrpsc_mem: - iounmap(pdata->ddrpll_reg_base); -no_ddrpll_mem: - iounmap(pdata->cpupll_reg_base); - return ret; -} - /* VPIF resource, platform data */ static u64 da850_vpif_dma_mask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index c9f7e9274aa8..9ee44da6eb7b 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -23,11 +23,11 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,davinci-i2c", 0x01e28000, "i2c_davinci.2", NULL), OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "davinci-wdt", NULL), OF_DEV_AUXDATA("ti,da830-mmc", 0x01c40000, "da830-mmc.0", NULL), - OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f00000, "ehrpwm", NULL), - OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f02000, "ehrpwm", NULL), - OF_DEV_AUXDATA("ti,da850-ecap", 0x01f06000, "ecap", NULL), - OF_DEV_AUXDATA("ti,da850-ecap", 0x01f07000, "ecap", NULL), - OF_DEV_AUXDATA("ti,da850-ecap", 0x01f08000, "ecap", NULL), + OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f00000, "ehrpwm.0", NULL), + OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f02000, "ehrpwm.1", NULL), + OF_DEV_AUXDATA("ti,da850-ecap", 0x01f06000, "ecap.0", NULL), + OF_DEV_AUXDATA("ti,da850-ecap", 0x01f07000, "ecap.1", NULL), + OF_DEV_AUXDATA("ti,da850-ecap", 0x01f08000, "ecap.2", NULL), OF_DEV_AUXDATA("ti,da830-spi", 0x01c41000, "spi_davinci.0", NULL), OF_DEV_AUXDATA("ti,da830-spi", 0x01f0e000, "spi_davinci.1", NULL), OF_DEV_AUXDATA("ns16550a", 0x01c42000, "serial8250.0", NULL), @@ -38,6 +38,10 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { NULL), OF_DEV_AUXDATA("ti,da830-mcasp-audio", 0x01d00000, "davinci-mcasp.0", NULL), OF_DEV_AUXDATA("ti,da850-aemif", 0x68000000, "ti-aemif", NULL), + OF_DEV_AUXDATA("ti,da850-tilcdc", 0x01e13000, "da8xx_lcdc.0", NULL), + OF_DEV_AUXDATA("ti,da830-ohci", 0x01e25000, "ohci-da8xx", NULL), + OF_DEV_AUXDATA("ti,da830-musb", 0x01e00000, "musb-da8xx", NULL), + OF_DEV_AUXDATA("ti,da830-usb-phy", 0x01c1417c, "da8xx-usb-phy", NULL), {} }; @@ -45,7 +49,19 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { static void __init da850_init_machine(void) { + int ret; + + ret = da8xx_register_usb20_phy_clk(false); + if (ret) + pr_warn("%s: registering USB 2.0 PHY clock failed: %d", + __func__, ret); + ret = da8xx_register_usb11_phy_clk(false); + if (ret) + pr_warn("%s: registering USB 1.1 PHY clock failed: %d", + __func__, ret); + of_platform_default_populate(NULL, da850_auxdata_lookup, NULL); + davinci_pm_init(); } static const char *const da850_boards_compat[] __initconst = { diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index add3771d38f6..c2457b3fdb5f 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -11,6 +11,7 @@ * (at your option) any later version. */ #include <linux/init.h> +#include <linux/platform_data/syscon.h> #include <linux/platform_device.h> #include <linux/dma-contiguous.h> #include <linux/serial_8250.h> @@ -57,15 +58,6 @@ #define DA8XX_EMAC_RAM_OFFSET 0x0000 #define DA8XX_EMAC_CTRL_RAM_SIZE SZ_8K -#define DA8XX_DMA_SPI0_RX EDMA_CTLR_CHAN(0, 14) -#define DA8XX_DMA_SPI0_TX EDMA_CTLR_CHAN(0, 15) -#define DA8XX_DMA_MMCSD0_RX EDMA_CTLR_CHAN(0, 16) -#define DA8XX_DMA_MMCSD0_TX EDMA_CTLR_CHAN(0, 17) -#define DA8XX_DMA_SPI1_RX EDMA_CTLR_CHAN(0, 18) -#define DA8XX_DMA_SPI1_TX EDMA_CTLR_CHAN(0, 19) -#define DA850_DMA_MMCSD1_RX EDMA_CTLR_CHAN(1, 28) -#define DA850_DMA_MMCSD1_TX EDMA_CTLR_CHAN(1, 29) - void __iomem *da8xx_syscfg0_base; void __iomem *da8xx_syscfg1_base; @@ -964,16 +956,6 @@ static struct resource da8xx_spi0_resources[] = { .end = IRQ_DA8XX_SPINT0, .flags = IORESOURCE_IRQ, }, - [2] = { - .start = DA8XX_DMA_SPI0_RX, - .end = DA8XX_DMA_SPI0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DA8XX_DMA_SPI0_TX, - .end = DA8XX_DMA_SPI0_TX, - .flags = IORESOURCE_DMA, - }, }; static struct resource da8xx_spi1_resources[] = { @@ -987,16 +969,6 @@ static struct resource da8xx_spi1_resources[] = { .end = IRQ_DA8XX_SPINT1, .flags = IORESOURCE_IRQ, }, - [2] = { - .start = DA8XX_DMA_SPI1_RX, - .end = DA8XX_DMA_SPI1_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DA8XX_DMA_SPI1_TX, - .end = DA8XX_DMA_SPI1_TX, - .flags = IORESOURCE_DMA, - }, }; static struct davinci_spi_platform_data da8xx_spi_pdata[] = { @@ -1089,3 +1061,30 @@ int __init da850_register_sata(unsigned long refclkpn) return platform_device_register(&da850_sata_device); } #endif + +static struct syscon_platform_data da8xx_cfgchip_platform_data = { + .label = "cfgchip", +}; + +static struct resource da8xx_cfgchip_resources[] = { + { + .start = DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP0_REG, + .end = DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP4_REG + 3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device da8xx_cfgchip_device = { + .name = "syscon", + .id = -1, + .dev = { + .platform_data = &da8xx_cfgchip_platform_data, + }, + .num_resources = ARRAY_SIZE(da8xx_cfgchip_resources), + .resource = da8xx_cfgchip_resources, +}; + +int __init da8xx_register_cfgchip(void) +{ + return platform_device_register(&da8xx_cfgchip_device); +} diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 67d26c5bda0b..3ae70f2909b0 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -36,9 +36,6 @@ #define DM365_MMCSD0_BASE 0x01D11000 #define DM365_MMCSD1_BASE 0x01D00000 -#define DAVINCI_DMA_MMCRXEVT 26 -#define DAVINCI_DMA_MMCTXEVT 27 - void __iomem *davinci_sysmod_base; void davinci_map_sysmod(void) diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index d33322ddedab..bd50367f654e 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -397,14 +397,6 @@ static struct resource dm355_spi0_resources[] = { .start = IRQ_DM355_SPINT0_0, .flags = IORESOURCE_IRQ, }, - { - .start = 17, - .flags = IORESOURCE_DMA, - }, - { - .start = 16, - .flags = IORESOURCE_DMA, - }, }; static struct davinci_spi_platform_data dm355_spi0_pdata = { diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index ef3add999263..8be04ec95adf 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -660,14 +660,6 @@ static struct resource dm365_spi0_resources[] = { .start = IRQ_DM365_SPIINT0_0, .flags = IORESOURCE_IRQ, }, - { - .start = 17, - .flags = IORESOURCE_DMA, - }, - { - .start = 16, - .flags = IORESOURCE_DMA, - }, }; static struct platform_device dm365_spi0_device = { diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index f9f9713aacdd..85ff2183b6db 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -61,6 +61,7 @@ extern unsigned int da850_max_speed; #define DA8XX_CFGCHIP1_REG 0x180 #define DA8XX_CFGCHIP2_REG 0x184 #define DA8XX_CFGCHIP3_REG 0x188 +#define DA8XX_CFGCHIP4_REG 0x18c #define DA8XX_SYSCFG1_BASE (IO_PHYS + 0x22C000) #define DA8XX_SYSCFG1_VIRT(x) (da8xx_syscfg1_base + (x)) @@ -88,8 +89,12 @@ int da850_register_edma(struct edma_rsv_info *rsv[2]); int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata); int da8xx_register_spi_bus(int instance, unsigned num_chipselect); int da8xx_register_watchdog(void); +int da8xx_register_usb_phy(void); int da8xx_register_usb20(unsigned mA, unsigned potpgt); int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); +int da8xx_register_usb_refclkin(int rate); +int da8xx_register_usb20_phy_clk(bool use_usb_refclkin); +int da8xx_register_usb11_phy_clk(bool use_usb_refclkin); int da8xx_register_emac(void); int da8xx_register_uio_pruss(void); int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata); @@ -101,7 +106,6 @@ int da8xx_register_gpio(void *pdata); int da850_register_cpufreq(char *async_clk); int da8xx_register_cpuidle(void); void __iomem *da8xx_get_mem_ctlr(void); -int da850_register_pm(struct platform_device *pdev); int da850_register_sata(unsigned long refclkpn); int da850_register_vpif(void); int da850_register_vpif_display @@ -113,6 +117,7 @@ void da8xx_rproc_reserve_cma(void); int da8xx_register_rproc(void); int da850_register_gpio(void); int da830_register_gpio(void); +int da8xx_register_cfgchip(void); extern struct platform_device da8xx_serial_device[]; extern struct emac_platform_data da8xx_emac_pdata; diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c index 8929569b1f8a..0afd201ab980 100644 --- a/arch/arm/mach-davinci/pm.c +++ b/arch/arm/mach-davinci/pm.c @@ -21,15 +21,22 @@ #include <mach/common.h> #include <mach/da8xx.h> -#include "sram.h" +#include <mach/mux.h> #include <mach/pm.h> #include "clock.h" +#include "psc.h" +#include "sram.h" +#define DA850_PLL1_BASE 0x01e1a000 #define DEEPSLEEP_SLEEPCOUNT_MASK 0xFFFF +#define DEEPSLEEP_SLEEPCOUNT 128 static void (*davinci_sram_suspend) (struct davinci_pm_config *); -static struct davinci_pm_config *pdata; +static struct davinci_pm_config pm_config = { + .sleepcount = DEEPSLEEP_SLEEPCOUNT, + .ddrpsc_num = DA8XX_LPSC1_EMIF3C, +}; static void davinci_sram_push(void *dest, void *src, unsigned int size) { @@ -41,58 +48,58 @@ static void davinci_pm_suspend(void) { unsigned val; - if (pdata->cpupll_reg_base != pdata->ddrpll_reg_base) { + if (pm_config.cpupll_reg_base != pm_config.ddrpll_reg_base) { /* Switch CPU PLL to bypass mode */ - val = __raw_readl(pdata->cpupll_reg_base + PLLCTL); + val = __raw_readl(pm_config.cpupll_reg_base + PLLCTL); val &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN); - __raw_writel(val, pdata->cpupll_reg_base + PLLCTL); + __raw_writel(val, pm_config.cpupll_reg_base + PLLCTL); udelay(PLL_BYPASS_TIME); /* Powerdown CPU PLL */ - val = __raw_readl(pdata->cpupll_reg_base + PLLCTL); + val = __raw_readl(pm_config.cpupll_reg_base + PLLCTL); val |= PLLCTL_PLLPWRDN; - __raw_writel(val, pdata->cpupll_reg_base + PLLCTL); + __raw_writel(val, pm_config.cpupll_reg_base + PLLCTL); } /* Configure sleep count in deep sleep register */ - val = __raw_readl(pdata->deepsleep_reg); + val = __raw_readl(pm_config.deepsleep_reg); val &= ~DEEPSLEEP_SLEEPCOUNT_MASK, - val |= pdata->sleepcount; - __raw_writel(val, pdata->deepsleep_reg); + val |= pm_config.sleepcount; + __raw_writel(val, pm_config.deepsleep_reg); /* System goes to sleep in this call */ - davinci_sram_suspend(pdata); + davinci_sram_suspend(&pm_config); - if (pdata->cpupll_reg_base != pdata->ddrpll_reg_base) { + if (pm_config.cpupll_reg_base != pm_config.ddrpll_reg_base) { /* put CPU PLL in reset */ - val = __raw_readl(pdata->cpupll_reg_base + PLLCTL); + val = __raw_readl(pm_config.cpupll_reg_base + PLLCTL); val &= ~PLLCTL_PLLRST; - __raw_writel(val, pdata->cpupll_reg_base + PLLCTL); + __raw_writel(val, pm_config.cpupll_reg_base + PLLCTL); /* put CPU PLL in power down */ - val = __raw_readl(pdata->cpupll_reg_base + PLLCTL); + val = __raw_readl(pm_config.cpupll_reg_base + PLLCTL); val &= ~PLLCTL_PLLPWRDN; - __raw_writel(val, pdata->cpupll_reg_base + PLLCTL); + __raw_writel(val, pm_config.cpupll_reg_base + PLLCTL); /* wait for CPU PLL reset */ udelay(PLL_RESET_TIME); /* bring CPU PLL out of reset */ - val = __raw_readl(pdata->cpupll_reg_base + PLLCTL); + val = __raw_readl(pm_config.cpupll_reg_base + PLLCTL); val |= PLLCTL_PLLRST; - __raw_writel(val, pdata->cpupll_reg_base + PLLCTL); + __raw_writel(val, pm_config.cpupll_reg_base + PLLCTL); /* Wait for CPU PLL to lock */ udelay(PLL_LOCK_TIME); /* Remove CPU PLL from bypass mode */ - val = __raw_readl(pdata->cpupll_reg_base + PLLCTL); + val = __raw_readl(pm_config.cpupll_reg_base + PLLCTL); val &= ~PLLCTL_PLLENSRC; val |= PLLCTL_PLLEN; - __raw_writel(val, pdata->cpupll_reg_base + PLLCTL); + __raw_writel(val, pm_config.cpupll_reg_base + PLLCTL); } } @@ -117,17 +124,36 @@ static const struct platform_suspend_ops davinci_pm_ops = { .valid = suspend_valid_only_mem, }; -static int __init davinci_pm_probe(struct platform_device *pdev) +int __init davinci_pm_init(void) { - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "cannot get platform data\n"); - return -ENOENT; + int ret; + + ret = davinci_cfg_reg(DA850_RTC_ALARM); + if (ret) + return ret; + + pm_config.ddr2_ctlr_base = da8xx_get_mem_ctlr(); + pm_config.deepsleep_reg = DA8XX_SYSCFG1_VIRT(DA8XX_DEEPSLEEP_REG); + + pm_config.cpupll_reg_base = ioremap(DA8XX_PLL0_BASE, SZ_4K); + if (!pm_config.cpupll_reg_base) + return -ENOMEM; + + pm_config.ddrpll_reg_base = ioremap(DA850_PLL1_BASE, SZ_4K); + if (!pm_config.ddrpll_reg_base) { + ret = -ENOMEM; + goto no_ddrpll_mem; + } + + pm_config.ddrpsc_reg_base = ioremap(DA8XX_PSC1_BASE, SZ_4K); + if (!pm_config.ddrpsc_reg_base) { + ret = -ENOMEM; + goto no_ddrpsc_mem; } davinci_sram_suspend = sram_alloc(davinci_cpu_suspend_sz, NULL); if (!davinci_sram_suspend) { - dev_err(&pdev->dev, "cannot allocate SRAM memory\n"); + pr_err("PM: cannot allocate SRAM memory\n"); return -ENOMEM; } @@ -136,23 +162,9 @@ static int __init davinci_pm_probe(struct platform_device *pdev) suspend_set_ops(&davinci_pm_ops); - return 0; -} - -static int __exit davinci_pm_remove(struct platform_device *pdev) -{ - sram_free(davinci_sram_suspend, davinci_cpu_suspend_sz); - return 0; -} - -static struct platform_driver davinci_pm_driver = { - .driver = { - .name = "pm-davinci", - }, - .remove = __exit_p(davinci_pm_remove), -}; - -int __init davinci_pm_init(void) -{ - return platform_driver_probe(&davinci_pm_driver, davinci_pm_probe); +no_ddrpsc_mem: + iounmap(pm_config.ddrpll_reg_base); +no_ddrpll_mem: + iounmap(pm_config.cpupll_reg_base); + return ret; } diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c index f141f5171906..c6feecf7ae24 100644 --- a/arch/arm/mach-davinci/usb-da8xx.c +++ b/arch/arm/mach-davinci/usb-da8xx.c @@ -1,21 +1,44 @@ /* * DA8xx USB */ +#include <linux/clk.h> +#include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/init.h> +#include <linux/mfd/da8xx-cfgchip.h> +#include <linux/phy/phy.h> #include <linux/platform_data/usb-davinci.h> #include <linux/platform_device.h> #include <linux/usb/musb.h> +#include <mach/clock.h> #include <mach/common.h> #include <mach/cputype.h> #include <mach/da8xx.h> #include <mach/irqs.h> +#include "clock.h" + #define DA8XX_USB0_BASE 0x01e00000 #define DA8XX_USB1_BASE 0x01e25000 -#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) +static struct platform_device da8xx_usb_phy = { + .name = "da8xx-usb-phy", + .id = -1, + .dev = { + /* + * Setting init_name so that clock lookup will work in + * da8xx_register_usb11_phy_clk() even if this device is not + * registered yet. + */ + .init_name = "da8xx-usb-phy", + }, +}; + +int __init da8xx_register_usb_phy(void) +{ + return platform_device_register(&da8xx_usb_phy); +} static struct musb_hdrc_config musb_config = { .multipoint = true, @@ -45,10 +68,15 @@ static struct resource da8xx_usb20_resources[] = { static u64 usb_dmamask = DMA_BIT_MASK(32); -static struct platform_device usb_dev = { +static struct platform_device da8xx_usb20_dev = { .name = "musb-da8xx", .id = -1, .dev = { + /* + * Setting init_name so that clock lookup will work in + * usb20_phy_clk_enable() even if this device is not registered. + */ + .init_name = "musb-da8xx", .platform_data = &usb_data, .dma_mask = &usb_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), @@ -62,18 +90,9 @@ int __init da8xx_register_usb20(unsigned int mA, unsigned int potpgt) usb_data.power = mA > 510 ? 255 : mA / 2; usb_data.potpgt = (potpgt + 1) / 2; - return platform_device_register(&usb_dev); -} - -#else - -int __init da8xx_register_usb20(unsigned int mA, unsigned int potpgt) -{ - return 0; + return platform_device_register(&da8xx_usb20_dev); } -#endif /* CONFIG_USB_MUSB_HDRC */ - static struct resource da8xx_usb11_resources[] = { [0] = { .start = DA8XX_USB1_BASE, @@ -90,8 +109,8 @@ static struct resource da8xx_usb11_resources[] = { static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32); static struct platform_device da8xx_usb11_device = { - .name = "ohci", - .id = 0, + .name = "ohci-da8xx", + .id = -1, .dev = { .dma_mask = &da8xx_usb11_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), @@ -105,3 +124,236 @@ int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata) da8xx_usb11_device.dev.platform_data = pdata; return platform_device_register(&da8xx_usb11_device); } + +static struct clk usb_refclkin = { + .name = "usb_refclkin", + .set_rate = davinci_simple_set_rate, +}; + +static struct clk_lookup usb_refclkin_lookup = + CLK(NULL, "usb_refclkin", &usb_refclkin); + +/** + * da8xx_register_usb_refclkin - register USB_REFCLKIN clock + * + * @rate: The clock rate in Hz + * + * This clock is only needed if the board provides an external USB_REFCLKIN + * signal, in which case it will be used as the parent of usb20_phy_clk and/or + * usb11_phy_clk. + */ +int __init da8xx_register_usb_refclkin(int rate) +{ + int ret; + + usb_refclkin.rate = rate; + ret = clk_register(&usb_refclkin); + if (ret) + return ret; + + clkdev_add(&usb_refclkin_lookup); + + return 0; +} + +static void usb20_phy_clk_enable(struct clk *clk) +{ + struct clk *usb20_clk; + int err; + u32 val; + u32 timeout = 500000; /* 500 msec */ + + val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); + + usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20"); + if (IS_ERR(usb20_clk)) { + pr_err("could not get usb20 clk: %ld\n", PTR_ERR(usb20_clk)); + return; + } + + /* The USB 2.O PLL requires that the USB 2.O PSC is enabled as well. */ + err = clk_prepare_enable(usb20_clk); + if (err) { + pr_err("failed to enable usb20 clk: %d\n", err); + clk_put(usb20_clk); + return; + } + + /* + * Turn on the USB 2.0 PHY, but just the PLL, and not OTG. The USB 1.1 + * host may use the PLL clock without USB 2.0 OTG being used. + */ + val &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN); + val |= CFGCHIP2_PHY_PLLON; + + writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); + + while (--timeout) { + val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); + if (val & CFGCHIP2_PHYCLKGD) + goto done; + udelay(1); + } + + pr_err("Timeout waiting for USB 2.0 PHY clock good\n"); +done: + clk_disable_unprepare(usb20_clk); + clk_put(usb20_clk); +} + +static void usb20_phy_clk_disable(struct clk *clk) +{ + u32 val; + + val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); + val |= CFGCHIP2_PHYPWRDN; + writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); +} + +static int usb20_phy_clk_set_parent(struct clk *clk, struct clk *parent) +{ + u32 val; + + val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); + + /* Set the mux depending on the parent clock. */ + if (parent == &usb_refclkin) { + val &= ~CFGCHIP2_USB2PHYCLKMUX; + } else if (strcmp(parent->name, "pll0_aux_clk") == 0) { + val |= CFGCHIP2_USB2PHYCLKMUX; + } else { + pr_err("Bad parent on USB 2.0 PHY clock\n"); + return -EINVAL; + } + + /* reference frequency also comes from parent clock */ + val &= ~CFGCHIP2_REFFREQ_MASK; + switch (clk_get_rate(parent)) { + case 12000000: + val |= CFGCHIP2_REFFREQ_12MHZ; + break; + case 13000000: + val |= CFGCHIP2_REFFREQ_13MHZ; + break; + case 19200000: + val |= CFGCHIP2_REFFREQ_19_2MHZ; + break; + case 20000000: + val |= CFGCHIP2_REFFREQ_20MHZ; + break; + case 24000000: + val |= CFGCHIP2_REFFREQ_24MHZ; + break; + case 26000000: + val |= CFGCHIP2_REFFREQ_26MHZ; + break; + case 38400000: + val |= CFGCHIP2_REFFREQ_38_4MHZ; + break; + case 40000000: + val |= CFGCHIP2_REFFREQ_40MHZ; + break; + case 48000000: + val |= CFGCHIP2_REFFREQ_48MHZ; + break; + default: + pr_err("Bad parent clock rate on USB 2.0 PHY clock\n"); + return -EINVAL; + } + + writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); + + return 0; +} + +static struct clk usb20_phy_clk = { + .name = "usb20_phy", + .clk_enable = usb20_phy_clk_enable, + .clk_disable = usb20_phy_clk_disable, + .set_parent = usb20_phy_clk_set_parent, +}; + +static struct clk_lookup usb20_phy_clk_lookup = + CLK("da8xx-usb-phy", "usb20_phy", &usb20_phy_clk); + +/** + * da8xx_register_usb20_phy_clk - register USB0PHYCLKMUX clock + * + * @use_usb_refclkin: Selects the parent clock - either "usb_refclkin" if true + * or "pll0_aux" if false. + */ +int __init da8xx_register_usb20_phy_clk(bool use_usb_refclkin) +{ + struct clk *parent; + int ret = 0; + + parent = clk_get(NULL, use_usb_refclkin ? "usb_refclkin" : "pll0_aux"); + if (IS_ERR(parent)) + return PTR_ERR(parent); + + usb20_phy_clk.parent = parent; + ret = clk_register(&usb20_phy_clk); + if (!ret) + clkdev_add(&usb20_phy_clk_lookup); + + clk_put(parent); + + return ret; +} + +static int usb11_phy_clk_set_parent(struct clk *clk, struct clk *parent) +{ + u32 val; + + val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); + + /* Set the USB 1.1 PHY clock mux based on the parent clock. */ + if (parent == &usb20_phy_clk) { + val &= ~CFGCHIP2_USB1PHYCLKMUX; + } else if (parent == &usb_refclkin) { + val |= CFGCHIP2_USB1PHYCLKMUX; + } else { + pr_err("Bad parent on USB 1.1 PHY clock\n"); + return -EINVAL; + } + + writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); + + return 0; +} + +static struct clk usb11_phy_clk = { + .name = "usb11_phy", + .set_parent = usb11_phy_clk_set_parent, +}; + +static struct clk_lookup usb11_phy_clk_lookup = + CLK("da8xx-usb-phy", "usb11_phy", &usb11_phy_clk); + +/** + * da8xx_register_usb11_phy_clk - register USB1PHYCLKMUX clock + * + * @use_usb_refclkin: Selects the parent clock - either "usb_refclkin" if true + * or "usb20_phy" if false. + */ +int __init da8xx_register_usb11_phy_clk(bool use_usb_refclkin) +{ + struct clk *parent; + int ret = 0; + + if (use_usb_refclkin) + parent = clk_get(NULL, "usb_refclkin"); + else + parent = clk_get(&da8xx_usb_phy.dev, "usb20_phy"); + if (IS_ERR(parent)) + return PTR_ERR(parent); + + usb11_phy_clk.parent = parent; + ret = clk_register(&usb11_phy_clk); + if (!ret) + clkdev_add(&usb11_phy_clk_lookup); + + clk_put(parent); + + return ret; +} diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 9155b639c9aa..936c59d0e18b 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -557,7 +557,6 @@ config SOC_VF610 bool "Vybrid Family VF610 support" select ARM_GIC if ARCH_MULTI_V7 select PINCTRL_VF610 - select PL310_ERRATA_769419 if CACHE_L2X0 help This enables support for Freescale Vybrid VF610 processor. diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 737450fe790c..cab128913e72 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -32,6 +32,7 @@ endif ifdef CONFIG_SND_IMX_SOC obj-y += ssi-fiq.o +obj-y += ssi-fiq-ksym.o endif # i.MX21 based machines diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index c4436d9c52ff..b09a2ec19267 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -43,7 +43,6 @@ int mx21_clocks_init(unsigned long lref, unsigned long fref); int mx27_clocks_init(unsigned long fref); int mx31_clocks_init(unsigned long fref); int mx35_clocks_init(void); -int mx31_clocks_init_dt(void); struct platform_device *mxc_register_gpio(char *name, int id, resource_size_t iobase, resource_size_t iosize, int irq, int irq_high); void mxc_set_cpu_type(unsigned int type); diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 0df062d8b2c9..1dc2a34b9dbd 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -380,13 +380,6 @@ static struct pu_domain imx6q_pu_domain = { .name = "PU", .power_off = imx6q_pm_pu_power_off, .power_on = imx6q_pm_pu_power_on, - .states = { - [0] = { - .power_off_latency_ns = 25000, - .power_on_latency_ns = 2000000, - }, - }, - .state_count = 1, }, }; @@ -408,7 +401,7 @@ static struct genpd_onecell_data imx_gpc_onecell_data = { static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg) { struct clk *clk; - int i; + int i, ret; imx6q_pu_domain.reg = pu_reg; @@ -430,13 +423,32 @@ static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg) if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS)) return 0; - pm_genpd_init(&imx6q_pu_domain.base, NULL, false); - return of_genpd_add_provider_onecell(dev->of_node, + imx6q_pu_domain.base.states = devm_kzalloc(dev, + sizeof(*imx6q_pu_domain.base.states), + GFP_KERNEL); + if (!imx6q_pu_domain.base.states) + return -ENOMEM; + + imx6q_pu_domain.base.states[0].power_off_latency_ns = 25000; + imx6q_pu_domain.base.states[0].power_on_latency_ns = 2000000; + imx6q_pu_domain.base.state_count = 1; + + for (i = 0; i < ARRAY_SIZE(imx_gpc_domains); i++) + pm_genpd_init(imx_gpc_domains[i], NULL, false); + + ret = of_genpd_add_provider_onecell(dev->of_node, &imx_gpc_onecell_data); + if (ret) + goto power_off; + + return 0; +power_off: + imx6q_pm_pu_power_off(&imx6q_pu_domain.base); clk_err: while (i--) clk_put(imx6q_pu_domain.clk[i]); + imx6q_pu_domain.reg = NULL; return -EINVAL; } diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c index 62e6b4fb5370..668d74b72511 100644 --- a/arch/arm/mach-imx/imx31-dt.c +++ b/arch/arm/mach-imx/imx31-dt.c @@ -23,11 +23,6 @@ static const char * const imx31_dt_board_compat[] __initconst = { NULL }; -static void __init imx31_dt_timer_init(void) -{ - mx31_clocks_init_dt(); -} - /* FIXME: replace with DT binding */ static const struct resource imx31_rnga_res[] __initconst = { DEFINE_RES_MEM(MX31_RNGA_BASE_ADDR, SZ_16K), @@ -43,7 +38,6 @@ DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .init_time = imx31_dt_timer_init, .init_machine = imx31_dt_mach_init, .dt_compat = imx31_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 97fd25105e2c..45801b27ee5c 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -173,7 +173,7 @@ static void __init imx6q_enet_phy_init(void) ksz9021rn_phy_fixup); phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK, ksz9031rn_phy_fixup); - phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff, + phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef, ar8031_phy_fixup); phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef, ar8035_phy_fixup); diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c index 58a2b88233e6..6cb8a22b617d 100644 --- a/arch/arm/mach-imx/mach-imx6ul.c +++ b/arch/arm/mach-imx/mach-imx6ul.c @@ -89,6 +89,7 @@ static void __init imx6ul_init_late(void) static const char * const imx6ul_dt_compat[] __initconst = { "fsl,imx6ul", + "fsl,imx6ull", NULL, }; diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c index db9621c718ec..ba96bf979625 100644 --- a/arch/arm/mach-imx/mmdc.c +++ b/arch/arm/mach-imx/mmdc.c @@ -1,5 +1,5 @@ /* - * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011,2016 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * * The code contained herein is licensed under the GNU General Public @@ -10,12 +10,16 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <linux/hrtimer.h> #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/io.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_device.h> +#include <linux/perf_event.h> +#include <linux/slab.h> #include "common.h" @@ -27,8 +31,489 @@ #define BM_MMDC_MDMISC_DDR_TYPE 0x18 #define BP_MMDC_MDMISC_DDR_TYPE 0x3 +#define TOTAL_CYCLES 0x0 +#define BUSY_CYCLES 0x1 +#define READ_ACCESSES 0x2 +#define WRITE_ACCESSES 0x3 +#define READ_BYTES 0x4 +#define WRITE_BYTES 0x5 + +/* Enables, resets, freezes, overflow profiling*/ +#define DBG_DIS 0x0 +#define DBG_EN 0x1 +#define DBG_RST 0x2 +#define PRF_FRZ 0x4 +#define CYC_OVF 0x8 +#define PROFILE_SEL 0x10 + +#define MMDC_MADPCR0 0x410 +#define MMDC_MADPSR0 0x418 +#define MMDC_MADPSR1 0x41C +#define MMDC_MADPSR2 0x420 +#define MMDC_MADPSR3 0x424 +#define MMDC_MADPSR4 0x428 +#define MMDC_MADPSR5 0x42C + +#define MMDC_NUM_COUNTERS 6 + +#define MMDC_FLAG_PROFILE_SEL 0x1 + +#define to_mmdc_pmu(p) container_of(p, struct mmdc_pmu, pmu) + static int ddr_type; +struct fsl_mmdc_devtype_data { + unsigned int flags; +}; + +static const struct fsl_mmdc_devtype_data imx6q_data = { +}; + +static const struct fsl_mmdc_devtype_data imx6qp_data = { + .flags = MMDC_FLAG_PROFILE_SEL, +}; + +static const struct of_device_id imx_mmdc_dt_ids[] = { + { .compatible = "fsl,imx6q-mmdc", .data = (void *)&imx6q_data}, + { .compatible = "fsl,imx6qp-mmdc", .data = (void *)&imx6qp_data}, + { /* sentinel */ } +}; + +#ifdef CONFIG_PERF_EVENTS + +static DEFINE_IDA(mmdc_ida); + +PMU_EVENT_ATTR_STRING(total-cycles, mmdc_pmu_total_cycles, "event=0x00") +PMU_EVENT_ATTR_STRING(busy-cycles, mmdc_pmu_busy_cycles, "event=0x01") +PMU_EVENT_ATTR_STRING(read-accesses, mmdc_pmu_read_accesses, "event=0x02") +PMU_EVENT_ATTR_STRING(write-accesses, mmdc_pmu_write_accesses, "config=0x03") +PMU_EVENT_ATTR_STRING(read-bytes, mmdc_pmu_read_bytes, "event=0x04") +PMU_EVENT_ATTR_STRING(read-bytes.unit, mmdc_pmu_read_bytes_unit, "MB"); +PMU_EVENT_ATTR_STRING(read-bytes.scale, mmdc_pmu_read_bytes_scale, "0.000001"); +PMU_EVENT_ATTR_STRING(write-bytes, mmdc_pmu_write_bytes, "event=0x05") +PMU_EVENT_ATTR_STRING(write-bytes.unit, mmdc_pmu_write_bytes_unit, "MB"); +PMU_EVENT_ATTR_STRING(write-bytes.scale, mmdc_pmu_write_bytes_scale, "0.000001"); + +struct mmdc_pmu { + struct pmu pmu; + void __iomem *mmdc_base; + cpumask_t cpu; + struct hrtimer hrtimer; + unsigned int active_events; + struct device *dev; + struct perf_event *mmdc_events[MMDC_NUM_COUNTERS]; + struct hlist_node node; + struct fsl_mmdc_devtype_data *devtype_data; +}; + +/* + * Polling period is set to one second, overflow of total-cycles (the fastest + * increasing counter) takes ten seconds so one second is safe + */ +static unsigned int mmdc_pmu_poll_period_us = 1000000; + +module_param_named(pmu_pmu_poll_period_us, mmdc_pmu_poll_period_us, uint, + S_IRUGO | S_IWUSR); + +static ktime_t mmdc_pmu_timer_period(void) +{ + return ns_to_ktime((u64)mmdc_pmu_poll_period_us * 1000); +} + +static ssize_t mmdc_pmu_cpumask_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct mmdc_pmu *pmu_mmdc = dev_get_drvdata(dev); + + return cpumap_print_to_pagebuf(true, buf, &pmu_mmdc->cpu); +} + +static struct device_attribute mmdc_pmu_cpumask_attr = + __ATTR(cpumask, S_IRUGO, mmdc_pmu_cpumask_show, NULL); + +static struct attribute *mmdc_pmu_cpumask_attrs[] = { + &mmdc_pmu_cpumask_attr.attr, + NULL, +}; + +static struct attribute_group mmdc_pmu_cpumask_attr_group = { + .attrs = mmdc_pmu_cpumask_attrs, +}; + +static struct attribute *mmdc_pmu_events_attrs[] = { + &mmdc_pmu_total_cycles.attr.attr, + &mmdc_pmu_busy_cycles.attr.attr, + &mmdc_pmu_read_accesses.attr.attr, + &mmdc_pmu_write_accesses.attr.attr, + &mmdc_pmu_read_bytes.attr.attr, + &mmdc_pmu_read_bytes_unit.attr.attr, + &mmdc_pmu_read_bytes_scale.attr.attr, + &mmdc_pmu_write_bytes.attr.attr, + &mmdc_pmu_write_bytes_unit.attr.attr, + &mmdc_pmu_write_bytes_scale.attr.attr, + NULL, +}; + +static struct attribute_group mmdc_pmu_events_attr_group = { + .name = "events", + .attrs = mmdc_pmu_events_attrs, +}; + +PMU_FORMAT_ATTR(event, "config:0-63"); +static struct attribute *mmdc_pmu_format_attrs[] = { + &format_attr_event.attr, + NULL, +}; + +static struct attribute_group mmdc_pmu_format_attr_group = { + .name = "format", + .attrs = mmdc_pmu_format_attrs, +}; + +static const struct attribute_group *attr_groups[] = { + &mmdc_pmu_events_attr_group, + &mmdc_pmu_format_attr_group, + &mmdc_pmu_cpumask_attr_group, + NULL, +}; + +static u32 mmdc_pmu_read_counter(struct mmdc_pmu *pmu_mmdc, int cfg) +{ + void __iomem *mmdc_base, *reg; + + mmdc_base = pmu_mmdc->mmdc_base; + + switch (cfg) { + case TOTAL_CYCLES: + reg = mmdc_base + MMDC_MADPSR0; + break; + case BUSY_CYCLES: + reg = mmdc_base + MMDC_MADPSR1; + break; + case READ_ACCESSES: + reg = mmdc_base + MMDC_MADPSR2; + break; + case WRITE_ACCESSES: + reg = mmdc_base + MMDC_MADPSR3; + break; + case READ_BYTES: + reg = mmdc_base + MMDC_MADPSR4; + break; + case WRITE_BYTES: + reg = mmdc_base + MMDC_MADPSR5; + break; + default: + return WARN_ONCE(1, + "invalid configuration %d for mmdc counter", cfg); + } + return readl(reg); +} + +static int mmdc_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node) +{ + struct mmdc_pmu *pmu_mmdc = hlist_entry_safe(node, struct mmdc_pmu, node); + int target; + + if (!cpumask_test_and_clear_cpu(cpu, &pmu_mmdc->cpu)) + return 0; + + target = cpumask_any_but(cpu_online_mask, cpu); + if (target >= nr_cpu_ids) + return 0; + + perf_pmu_migrate_context(&pmu_mmdc->pmu, cpu, target); + cpumask_set_cpu(target, &pmu_mmdc->cpu); + + return 0; +} + +static bool mmdc_pmu_group_event_is_valid(struct perf_event *event, + struct pmu *pmu, + unsigned long *used_counters) +{ + int cfg = event->attr.config; + + if (is_software_event(event)) + return true; + + if (event->pmu != pmu) + return false; + + return !test_and_set_bit(cfg, used_counters); +} + +/* + * Each event has a single fixed-purpose counter, so we can only have a + * single active event for each at any point in time. Here we just check + * for duplicates, and rely on mmdc_pmu_event_init to verify that the HW + * event numbers are valid. + */ +static bool mmdc_pmu_group_is_valid(struct perf_event *event) +{ + struct pmu *pmu = event->pmu; + struct perf_event *leader = event->group_leader; + struct perf_event *sibling; + unsigned long counter_mask = 0; + + set_bit(leader->attr.config, &counter_mask); + + if (event != leader) { + if (!mmdc_pmu_group_event_is_valid(event, pmu, &counter_mask)) + return false; + } + + list_for_each_entry(sibling, &leader->sibling_list, group_entry) { + if (!mmdc_pmu_group_event_is_valid(sibling, pmu, &counter_mask)) + return false; + } + + return true; +} + +static int mmdc_pmu_event_init(struct perf_event *event) +{ + struct mmdc_pmu *pmu_mmdc = to_mmdc_pmu(event->pmu); + int cfg = event->attr.config; + + if (event->attr.type != event->pmu->type) + return -ENOENT; + + if (is_sampling_event(event) || event->attach_state & PERF_ATTACH_TASK) + return -EOPNOTSUPP; + + if (event->cpu < 0) { + dev_warn(pmu_mmdc->dev, "Can't provide per-task data!\n"); + return -EOPNOTSUPP; + } + + if (event->attr.exclude_user || + event->attr.exclude_kernel || + event->attr.exclude_hv || + event->attr.exclude_idle || + event->attr.exclude_host || + event->attr.exclude_guest || + event->attr.sample_period) + return -EINVAL; + + if (cfg < 0 || cfg >= MMDC_NUM_COUNTERS) + return -EINVAL; + + if (!mmdc_pmu_group_is_valid(event)) + return -EINVAL; + + event->cpu = cpumask_first(&pmu_mmdc->cpu); + return 0; +} + +static void mmdc_pmu_event_update(struct perf_event *event) +{ + struct mmdc_pmu *pmu_mmdc = to_mmdc_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; + u64 delta, prev_raw_count, new_raw_count; + + do { + prev_raw_count = local64_read(&hwc->prev_count); + new_raw_count = mmdc_pmu_read_counter(pmu_mmdc, + event->attr.config); + } while (local64_cmpxchg(&hwc->prev_count, prev_raw_count, + new_raw_count) != prev_raw_count); + + delta = (new_raw_count - prev_raw_count) & 0xFFFFFFFF; + + local64_add(delta, &event->count); +} + +static void mmdc_pmu_event_start(struct perf_event *event, int flags) +{ + struct mmdc_pmu *pmu_mmdc = to_mmdc_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; + void __iomem *mmdc_base, *reg; + u32 val; + + mmdc_base = pmu_mmdc->mmdc_base; + reg = mmdc_base + MMDC_MADPCR0; + + /* + * hrtimer is required because mmdc does not provide an interrupt so + * polling is necessary + */ + hrtimer_start(&pmu_mmdc->hrtimer, mmdc_pmu_timer_period(), + HRTIMER_MODE_REL_PINNED); + + local64_set(&hwc->prev_count, 0); + + writel(DBG_RST, reg); + + val = DBG_EN; + if (pmu_mmdc->devtype_data->flags & MMDC_FLAG_PROFILE_SEL) + val |= PROFILE_SEL; + + writel(val, reg); +} + +static int mmdc_pmu_event_add(struct perf_event *event, int flags) +{ + struct mmdc_pmu *pmu_mmdc = to_mmdc_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; + + int cfg = event->attr.config; + + if (flags & PERF_EF_START) + mmdc_pmu_event_start(event, flags); + + if (pmu_mmdc->mmdc_events[cfg] != NULL) + return -EAGAIN; + + pmu_mmdc->mmdc_events[cfg] = event; + pmu_mmdc->active_events++; + + local64_set(&hwc->prev_count, mmdc_pmu_read_counter(pmu_mmdc, cfg)); + + return 0; +} + +static void mmdc_pmu_event_stop(struct perf_event *event, int flags) +{ + struct mmdc_pmu *pmu_mmdc = to_mmdc_pmu(event->pmu); + void __iomem *mmdc_base, *reg; + + mmdc_base = pmu_mmdc->mmdc_base; + reg = mmdc_base + MMDC_MADPCR0; + + writel(PRF_FRZ, reg); + mmdc_pmu_event_update(event); +} + +static void mmdc_pmu_event_del(struct perf_event *event, int flags) +{ + struct mmdc_pmu *pmu_mmdc = to_mmdc_pmu(event->pmu); + int cfg = event->attr.config; + + pmu_mmdc->mmdc_events[cfg] = NULL; + pmu_mmdc->active_events--; + + if (pmu_mmdc->active_events == 0) + hrtimer_cancel(&pmu_mmdc->hrtimer); + + mmdc_pmu_event_stop(event, PERF_EF_UPDATE); +} + +static void mmdc_pmu_overflow_handler(struct mmdc_pmu *pmu_mmdc) +{ + int i; + + for (i = 0; i < MMDC_NUM_COUNTERS; i++) { + struct perf_event *event = pmu_mmdc->mmdc_events[i]; + + if (event) + mmdc_pmu_event_update(event); + } +} + +static enum hrtimer_restart mmdc_pmu_timer_handler(struct hrtimer *hrtimer) +{ + struct mmdc_pmu *pmu_mmdc = container_of(hrtimer, struct mmdc_pmu, + hrtimer); + + mmdc_pmu_overflow_handler(pmu_mmdc); + hrtimer_forward_now(hrtimer, mmdc_pmu_timer_period()); + + return HRTIMER_RESTART; +} + +static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc, + void __iomem *mmdc_base, struct device *dev) +{ + int mmdc_num; + + *pmu_mmdc = (struct mmdc_pmu) { + .pmu = (struct pmu) { + .task_ctx_nr = perf_invalid_context, + .attr_groups = attr_groups, + .event_init = mmdc_pmu_event_init, + .add = mmdc_pmu_event_add, + .del = mmdc_pmu_event_del, + .start = mmdc_pmu_event_start, + .stop = mmdc_pmu_event_stop, + .read = mmdc_pmu_event_update, + }, + .mmdc_base = mmdc_base, + .dev = dev, + .active_events = 0, + }; + + mmdc_num = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL); + + return mmdc_num; +} + +static int imx_mmdc_remove(struct platform_device *pdev) +{ + struct mmdc_pmu *pmu_mmdc = platform_get_drvdata(pdev); + + perf_pmu_unregister(&pmu_mmdc->pmu); + cpuhp_remove_state_nocalls(CPUHP_ONLINE); + kfree(pmu_mmdc); + return 0; +} + +static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_base) +{ + struct mmdc_pmu *pmu_mmdc; + char *name; + int mmdc_num; + int ret; + const struct of_device_id *of_id = + of_match_device(imx_mmdc_dt_ids, &pdev->dev); + + pmu_mmdc = kzalloc(sizeof(*pmu_mmdc), GFP_KERNEL); + if (!pmu_mmdc) { + pr_err("failed to allocate PMU device!\n"); + return -ENOMEM; + } + + mmdc_num = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev); + if (mmdc_num == 0) + name = "mmdc"; + else + name = devm_kasprintf(&pdev->dev, + GFP_KERNEL, "mmdc%d", mmdc_num); + + pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data; + + hrtimer_init(&pmu_mmdc->hrtimer, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); + pmu_mmdc->hrtimer.function = mmdc_pmu_timer_handler; + + cpuhp_state_add_instance_nocalls(CPUHP_ONLINE, + &pmu_mmdc->node); + cpumask_set_cpu(smp_processor_id(), &pmu_mmdc->cpu); + ret = cpuhp_setup_state_multi(CPUHP_AP_NOTIFY_ONLINE, + "MMDC_ONLINE", NULL, + mmdc_pmu_offline_cpu); + if (ret) { + pr_err("cpuhp_setup_state_multi failure\n"); + goto pmu_register_err; + } + + ret = perf_pmu_register(&(pmu_mmdc->pmu), name, -1); + platform_set_drvdata(pdev, pmu_mmdc); + if (ret) + goto pmu_register_err; + return 0; + +pmu_register_err: + pr_warn("MMDC Perf PMU failed (%d), disabled\n", ret); + hrtimer_cancel(&pmu_mmdc->hrtimer); + kfree(pmu_mmdc); + return ret; +} + +#else +#define imx_mmdc_remove NULL +#define imx_mmdc_perf_init(pdev, mmdc_base) 0 +#endif + static int imx_mmdc_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; @@ -62,7 +547,7 @@ static int imx_mmdc_probe(struct platform_device *pdev) return -EBUSY; } - return 0; + return imx_mmdc_perf_init(pdev, mmdc_base); } int imx_mmdc_get_ddr_type(void) @@ -70,17 +555,13 @@ int imx_mmdc_get_ddr_type(void) return ddr_type; } -static const struct of_device_id imx_mmdc_dt_ids[] = { - { .compatible = "fsl,imx6q-mmdc", }, - { /* sentinel */ } -}; - static struct platform_driver imx_mmdc_driver = { .driver = { .name = "imx-mmdc", .of_match_table = imx_mmdc_dt_ids, }, .probe = imx_mmdc_probe, + .remove = imx_mmdc_remove, }; static int __init imx_mmdc_init(void) diff --git a/arch/arm/mach-imx/ssi-fiq-ksym.c b/arch/arm/mach-imx/ssi-fiq-ksym.c new file mode 100644 index 000000000000..792090f9a032 --- /dev/null +++ b/arch/arm/mach-imx/ssi-fiq-ksym.c @@ -0,0 +1,20 @@ +/* + * Exported ksyms for the SSI FIQ handler + * + * Copyright (C) 2009, Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> + +#include <linux/platform_data/asoc-imx-ssi.h> + +EXPORT_SYMBOL(imx_ssi_fiq_tx_buffer); +EXPORT_SYMBOL(imx_ssi_fiq_rx_buffer); +EXPORT_SYMBOL(imx_ssi_fiq_start); +EXPORT_SYMBOL(imx_ssi_fiq_end); +EXPORT_SYMBOL(imx_ssi_fiq_base); + diff --git a/arch/arm/mach-imx/ssi-fiq.S b/arch/arm/mach-imx/ssi-fiq.S index fd7917f1c204..a8b93c5f29b5 100644 --- a/arch/arm/mach-imx/ssi-fiq.S +++ b/arch/arm/mach-imx/ssi-fiq.S @@ -8,7 +8,6 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/export.h> /* * r8 = bit 0-15: tx offset, bit 16-31: tx buffer size @@ -145,8 +144,4 @@ imx_ssi_fiq_tx_buffer: .word 0x0 .L_imx_ssi_fiq_end: imx_ssi_fiq_end: -EXPORT_SYMBOL(imx_ssi_fiq_tx_buffer) -EXPORT_SYMBOL(imx_ssi_fiq_rx_buffer) -EXPORT_SYMBOL(imx_ssi_fiq_start) -EXPORT_SYMBOL(imx_ssi_fiq_end) -EXPORT_SYMBOL(imx_ssi_fiq_base) + diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index ed9a01484030..a109f6482413 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -21,7 +21,6 @@ #include <linux/amba/bus.h> #include <linux/amba/clcd.h> #include <linux/amba/mmci.h> -#include <linux/amba/pl061.h> #include <linux/io.h> #include <linux/platform_data/clk-integrator.h> #include <linux/slab.h> diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 23b98fd414bf..a1af634f8709 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -27,6 +27,8 @@ #include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/termios.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -37,11 +39,8 @@ #include "pci_v3.h" #include "lm.h" -/* Base address to the AP system controller */ -void __iomem *ap_syscon_base; -/* Base address to the external bus interface */ -static void __iomem *ebi_base; - +/* Regmap to the AP system controller */ +static struct regmap *ap_syscon_map; /* * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx @@ -125,6 +124,7 @@ static void integrator_uart_set_mctrl(struct amba_device *dev, { unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask; u32 phybase = dev->res.start; + int ret; if (phybase == INTEGRATOR_UART0_BASE) { /* UART0 */ @@ -146,8 +146,17 @@ static void integrator_uart_set_mctrl(struct amba_device *dev, else ctrls |= dtr_mask; - __raw_writel(ctrls, ap_syscon_base + INTEGRATOR_SC_CTRLS_OFFSET); - __raw_writel(ctrlc, ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); + ret = regmap_write(ap_syscon_map, + INTEGRATOR_SC_CTRLS_OFFSET, + ctrls); + if (ret) + pr_err("MODEM: unable to write PL010 UART CTRLS\n"); + + ret = regmap_write(ap_syscon_map, + INTEGRATOR_SC_CTRLC_OFFSET, + ctrlc); + if (ret) + pr_err("MODEM: unable to write PL010 UART CRTLC\n"); } struct amba_pl010_data ap_uart_data = { @@ -178,35 +187,32 @@ static const struct of_device_id ap_syscon_match[] = { { }, }; -static const struct of_device_id ebi_match[] = { - { .compatible = "arm,external-bus-interface"}, - { }, -}; - static void __init ap_init_of(void) { - unsigned long sc_dec; + u32 sc_dec; struct device_node *syscon; - struct device_node *ebi; + int ret; int i; + of_platform_default_populate(NULL, ap_auxdata_lookup, NULL); + syscon = of_find_matching_node(NULL, ap_syscon_match); if (!syscon) return; - ebi = of_find_matching_node(NULL, ebi_match); - if (!ebi) + ap_syscon_map = syscon_node_to_regmap(syscon); + if (IS_ERR(ap_syscon_map)) { + pr_crit("could not find Integrator/AP system controller\n"); return; + } - ap_syscon_base = of_iomap(syscon, 0); - if (!ap_syscon_base) - return; - ebi_base = of_iomap(ebi, 0); - if (!ebi_base) + ret = regmap_read(ap_syscon_map, + INTEGRATOR_SC_DEC_OFFSET, + &sc_dec); + if (ret) { + pr_crit("could not read from Integrator/AP syscon\n"); return; + } - of_platform_default_populate(NULL, ap_auxdata_lookup, NULL); - - sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET); for (i = 0; i < 4; i++) { struct lm_device *lmdev; diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 43ee06d3abe5..b3bd0e137f6d 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -26,7 +26,6 @@ #include <linux/reboot.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> -#include <linux/gpio.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-lpc32xx/clock.h b/arch/arm/mach-lpc32xx/clock.h deleted file mode 100644 index c0a8434307f7..000000000000 --- a/arch/arm/mach-lpc32xx/clock.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/clock.h - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __LPC32XX_CLOCK_H -#define __LPC32XX_CLOCK_H - -struct clk { - struct list_head node; - struct clk *parent; - u32 rate; - u32 usecount; - - int (*set_rate) (struct clk *, unsigned long); - unsigned long (*round_rate) (struct clk *, unsigned long); - unsigned long (*get_rate) (struct clk *clk); - int (*enable) (struct clk *, int); - - /* Register address and bit mask for simple clocks */ - void __iomem *enable_reg; - u32 enable_mask; -}; - -#endif diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h index 30c9e64fc65b..02575c2444e4 100644 --- a/arch/arm/mach-lpc32xx/common.h +++ b/arch/arm/mach-lpc32xx/common.h @@ -24,7 +24,6 @@ /* * Other arch specific structures and functions */ -extern void __init lpc32xx_init_irq(void); extern void __init lpc32xx_map_io(void); extern void __init lpc32xx_serial_init(void); diff --git a/arch/arm/mach-lpc32xx/include/mach/irqs.h b/arch/arm/mach-lpc32xx/include/mach/irqs.h deleted file mode 100644 index 00190535df90..000000000000 --- a/arch/arm/mach-lpc32xx/include/mach/irqs.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/include/mach/irqs.h - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARM_ARCH_IRQS_H -#define __ASM_ARM_ARCH_IRQS_H - -#define LPC32XX_SIC1_IRQ(n) (32 + (n)) -#define LPC32XX_SIC2_IRQ(n) (64 + (n)) - -/* - * MIC interrupts - */ -#define IRQ_LPC32XX_SUB1IRQ 0 -#define IRQ_LPC32XX_SUB2IRQ 1 -#define IRQ_LPC32XX_PWM3 3 -#define IRQ_LPC32XX_PWM4 4 -#define IRQ_LPC32XX_HSTIMER 5 -#define IRQ_LPC32XX_WATCH 6 -#define IRQ_LPC32XX_UART_IIR3 7 -#define IRQ_LPC32XX_UART_IIR4 8 -#define IRQ_LPC32XX_UART_IIR5 9 -#define IRQ_LPC32XX_UART_IIR6 10 -#define IRQ_LPC32XX_FLASH 11 -#define IRQ_LPC32XX_SD1 13 -#define IRQ_LPC32XX_LCD 14 -#define IRQ_LPC32XX_SD0 15 -#define IRQ_LPC32XX_TIMER0 16 -#define IRQ_LPC32XX_TIMER1 17 -#define IRQ_LPC32XX_TIMER2 18 -#define IRQ_LPC32XX_TIMER3 19 -#define IRQ_LPC32XX_SSP0 20 -#define IRQ_LPC32XX_SSP1 21 -#define IRQ_LPC32XX_I2S0 22 -#define IRQ_LPC32XX_I2S1 23 -#define IRQ_LPC32XX_UART_IIR7 24 -#define IRQ_LPC32XX_UART_IIR2 25 -#define IRQ_LPC32XX_UART_IIR1 26 -#define IRQ_LPC32XX_MSTIMER 27 -#define IRQ_LPC32XX_DMA 28 -#define IRQ_LPC32XX_ETHERNET 29 -#define IRQ_LPC32XX_SUB1FIQ 30 -#define IRQ_LPC32XX_SUB2FIQ 31 - -/* - * SIC1 interrupts start at offset 32 - */ -#define IRQ_LPC32XX_JTAG_COMM_TX LPC32XX_SIC1_IRQ(1) -#define IRQ_LPC32XX_JTAG_COMM_RX LPC32XX_SIC1_IRQ(2) -#define IRQ_LPC32XX_GPI_28 LPC32XX_SIC1_IRQ(4) -#define IRQ_LPC32XX_TS_P LPC32XX_SIC1_IRQ(6) -#define IRQ_LPC32XX_TS_IRQ LPC32XX_SIC1_IRQ(7) -#define IRQ_LPC32XX_TS_AUX LPC32XX_SIC1_IRQ(8) -#define IRQ_LPC32XX_SPI2 LPC32XX_SIC1_IRQ(12) -#define IRQ_LPC32XX_PLLUSB LPC32XX_SIC1_IRQ(13) -#define IRQ_LPC32XX_PLLHCLK LPC32XX_SIC1_IRQ(14) -#define IRQ_LPC32XX_PLL397 LPC32XX_SIC1_IRQ(17) -#define IRQ_LPC32XX_I2C_2 LPC32XX_SIC1_IRQ(18) -#define IRQ_LPC32XX_I2C_1 LPC32XX_SIC1_IRQ(19) -#define IRQ_LPC32XX_RTC LPC32XX_SIC1_IRQ(20) -#define IRQ_LPC32XX_KEY LPC32XX_SIC1_IRQ(22) -#define IRQ_LPC32XX_SPI1 LPC32XX_SIC1_IRQ(23) -#define IRQ_LPC32XX_SW LPC32XX_SIC1_IRQ(24) -#define IRQ_LPC32XX_USB_OTG_TIMER LPC32XX_SIC1_IRQ(25) -#define IRQ_LPC32XX_USB_OTG_ATX LPC32XX_SIC1_IRQ(26) -#define IRQ_LPC32XX_USB_HOST LPC32XX_SIC1_IRQ(27) -#define IRQ_LPC32XX_USB_DEV_DMA LPC32XX_SIC1_IRQ(28) -#define IRQ_LPC32XX_USB_DEV_LP LPC32XX_SIC1_IRQ(29) -#define IRQ_LPC32XX_USB_DEV_HP LPC32XX_SIC1_IRQ(30) -#define IRQ_LPC32XX_USB_I2C LPC32XX_SIC1_IRQ(31) - -/* - * SIC2 interrupts start at offset 64 - */ -#define IRQ_LPC32XX_GPIO_00 LPC32XX_SIC2_IRQ(0) -#define IRQ_LPC32XX_GPIO_01 LPC32XX_SIC2_IRQ(1) -#define IRQ_LPC32XX_GPIO_02 LPC32XX_SIC2_IRQ(2) -#define IRQ_LPC32XX_GPIO_03 LPC32XX_SIC2_IRQ(3) -#define IRQ_LPC32XX_GPIO_04 LPC32XX_SIC2_IRQ(4) -#define IRQ_LPC32XX_GPIO_05 LPC32XX_SIC2_IRQ(5) -#define IRQ_LPC32XX_SPI2_DATAIN LPC32XX_SIC2_IRQ(6) -#define IRQ_LPC32XX_U2_HCTS LPC32XX_SIC2_IRQ(7) -#define IRQ_LPC32XX_P0_P1_IRQ LPC32XX_SIC2_IRQ(8) -#define IRQ_LPC32XX_GPI_08 LPC32XX_SIC2_IRQ(9) -#define IRQ_LPC32XX_GPI_09 LPC32XX_SIC2_IRQ(10) -#define IRQ_LPC32XX_GPI_19 LPC32XX_SIC2_IRQ(11) -#define IRQ_LPC32XX_U7_HCTS LPC32XX_SIC2_IRQ(12) -#define IRQ_LPC32XX_GPI_07 LPC32XX_SIC2_IRQ(15) -#define IRQ_LPC32XX_SDIO LPC32XX_SIC2_IRQ(18) -#define IRQ_LPC32XX_U5_RX LPC32XX_SIC2_IRQ(19) -#define IRQ_LPC32XX_SPI1_DATAIN LPC32XX_SIC2_IRQ(20) -#define IRQ_LPC32XX_GPI_00 LPC32XX_SIC2_IRQ(22) -#define IRQ_LPC32XX_GPI_01 LPC32XX_SIC2_IRQ(23) -#define IRQ_LPC32XX_GPI_02 LPC32XX_SIC2_IRQ(24) -#define IRQ_LPC32XX_GPI_03 LPC32XX_SIC2_IRQ(25) -#define IRQ_LPC32XX_GPI_04 LPC32XX_SIC2_IRQ(26) -#define IRQ_LPC32XX_GPI_05 LPC32XX_SIC2_IRQ(27) -#define IRQ_LPC32XX_GPI_06 LPC32XX_SIC2_IRQ(28) -#define IRQ_LPC32XX_SYSCLK LPC32XX_SIC2_IRQ(31) - -#define LPC32XX_NR_IRQS 96 - -#endif diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index 0e4cbbe980eb..6c52bd32610e 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -23,7 +23,6 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/dma-mapping.h> -#include <linux/device.h> #include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/clcd.h> diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c index 207e81275ff0..62471570d586 100644 --- a/arch/arm/mach-lpc32xx/pm.c +++ b/arch/arm/mach-lpc32xx/pm.c @@ -73,7 +73,6 @@ #include <mach/hardware.h> #include <mach/platform.h> #include "common.h" -#include "clock.h" #define TEMP_IRAM_AREA IO_ADDRESS(LPC32XX_IRAM_BASE) diff --git a/arch/arm/mach-mediatek/Makefile b/arch/arm/mach-mediatek/Makefile index 21164605b83f..dadae67d79b7 100644 --- a/arch/arm/mach-mediatek/Makefile +++ b/arch/arm/mach-mediatek/Makefile @@ -1,4 +1,2 @@ -ifeq ($(CONFIG_SMP),y) -obj-$(CONFIG_ARCH_MEDIATEK) += platsmp.o -endif -obj-$(CONFIG_ARCH_MEDIATEK) += mediatek.o +obj-$(CONFIG_SMP) += platsmp.o +obj-y += mediatek.o diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index f9b6bd306cfe..541647f57192 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -23,6 +23,7 @@ config MACH_MVEBU_V7 select CACHE_L2X0 select ARM_CPU_SUSPEND select MACH_MVEBU_ANY + select MVEBU_CLK_COREDIV config MACH_ARMADA_370 bool "Marvell Armada 370 boards" @@ -32,7 +33,6 @@ config MACH_ARMADA_370 select CPU_PJ4B select MACH_MVEBU_V7 select PINCTRL_ARMADA_370 - select MVEBU_CLK_COREDIV help Say 'Y' here if you want your kernel to support boards based on the Marvell Armada 370 SoC with device tree. @@ -50,7 +50,6 @@ config MACH_ARMADA_375 select HAVE_SMP select MACH_MVEBU_V7 select PINCTRL_ARMADA_375 - select MVEBU_CLK_COREDIV help Say 'Y' here if you want your kernel to support boards based on the Marvell Armada 375 SoC with device tree. @@ -68,7 +67,6 @@ config MACH_ARMADA_38X select HAVE_SMP select MACH_MVEBU_V7 select PINCTRL_ARMADA_38X - select MVEBU_CLK_COREDIV help Say 'Y' here if you want your kernel to support boards based on the Marvell Armada 380/385 SoC with device tree. diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index afb809509140..45c6b733c881 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -31,6 +31,32 @@ config ARCH_OMAP16XX select ARCH_OMAP_OTG select CPU_ARM926T +config OMAP_MUX + bool "OMAP multiplexing support" + depends on ARCH_OMAP + default y + help + Pin multiplexing support for OMAP boards. If your bootloader + sets the multiplexing correctly, say N. Otherwise, or if unsure, + say Y. + +config OMAP_MUX_DEBUG + bool "Multiplexing debug output" + depends on OMAP_MUX + help + Makes the multiplexing functions print out a lot of debug info. + This is useful if you want to find out the correct values of the + multiplexing registers. + +config OMAP_MUX_WARNINGS + bool "Warn about pins the bootloader didn't set up" + depends on OMAP_MUX + default y + help + Choose Y here to warn whenever driver initialization logic needs + to change the pin multiplexing setup. When there are no warnings + printed, it's safe to deselect OMAP_MUX for your product. + comment "OMAP Board Type" depends on ARCH_OMAP1 diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c index 82887d645a6a..32f6c53367bf 100644 --- a/arch/arm/mach-omap1/i2c.c +++ b/arch/arm/mach-omap1/i2c.c @@ -19,6 +19,7 @@ * */ +#include <linux/i2c.h> #include <linux/i2c-omap.h> #include <mach/mux.h> #include "soc.h" @@ -91,6 +92,88 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata, return platform_device_register(pdev); } +#define OMAP_I2C_MAX_CONTROLLERS 4 +static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS]; + +#define OMAP_I2C_CMDLINE_SETUP (BIT(31)) + +/** + * omap_i2c_bus_setup - Process command line options for the I2C bus speed + * @str: String of options + * + * This function allow to override the default I2C bus speed for given I2C + * bus with a command line option. + * + * Format: i2c_bus=bus_id,clkrate (in kHz) + * + * Returns 1 on success, 0 otherwise. + */ +static int __init omap_i2c_bus_setup(char *str) +{ + int ints[3]; + + get_options(str, 3, ints); + if (ints[0] < 2 || ints[1] < 1 || + ints[1] > OMAP_I2C_MAX_CONTROLLERS) + return 0; + i2c_pdata[ints[1] - 1].clkrate = ints[2]; + i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP; + + return 1; +} +__setup("i2c_bus=", omap_i2c_bus_setup); + +/* + * Register busses defined in command line but that are not registered with + * omap_register_i2c_bus from board initialization code. + */ +int __init omap_register_i2c_bus_cmdline(void) +{ + int i, err = 0; + + for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++) + if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) { + i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP; + err = omap_i2c_add_bus(&i2c_pdata[i], i + 1); + if (err) + goto out; + } + +out: + return err; +} + +/** + * omap_register_i2c_bus - register I2C bus with device descriptors + * @bus_id: bus id counting from number 1 + * @clkrate: clock rate of the bus in kHz + * @info: pointer into I2C device descriptor table or NULL + * @len: number of descriptors in the table + * + * Returns 0 on success or an error code. + */ +int __init omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + int err; + + BUG_ON(bus_id < 1 || bus_id > OMAP_I2C_MAX_CONTROLLERS); + + if (info) { + err = i2c_register_board_info(bus_id, info, len); + if (err) + return err; + } + + if (!i2c_pdata[bus_id - 1].clkrate) + i2c_pdata[bus_id - 1].clkrate = clkrate; + + i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP; + + return omap_i2c_add_bus(&i2c_pdata[bus_id - 1], bus_id); +} + static int __init omap_i2c_cmdline(void) { return omap_register_i2c_bus_cmdline(); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index a9afeebd59f2..0465338183c7 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -71,6 +71,7 @@ config SOC_AM43XX select HAVE_ARM_TWD select ARM_ERRATA_754322 select ARM_ERRATA_775420 + select OMAP_INTERCONNECT config SOC_DRA7XX bool "TI DRA7XX" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 5b37ec29996e..469894082fea 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -6,7 +6,7 @@ ccflags-y := -I$(srctree)/$(src)/include \ -I$(srctree)/arch/arm/plat-omap/include # Common support -obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \ +obj-y := id.o io.o control.o devices.o fb.o timer.o pm.o \ common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ omap_device.o omap-headsmp.o sram.o drm.o @@ -63,9 +63,6 @@ obj-$(CONFIG_ARCH_OMAP4) += omap4-restart.o obj-$(CONFIG_SOC_OMAP5) += omap4-restart.o obj-$(CONFIG_SOC_DRA7XX) += omap4-restart.o -# Pin multiplexing -obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o - # SMS/SDRC obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o # obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o @@ -80,7 +77,7 @@ endif # Power Management omap-4-5-pm-common = omap-mpuss-lowpower.o obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-pm-common) -obj-$(CONFIG_ARCH_OMAP5) += $(omap-4-5-pm-common) +obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-pm-common) obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o ifeq ($(CONFIG_PM),y) @@ -235,26 +232,15 @@ obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o # Platform specific device init code -omap-flash-$(CONFIG_MTD_NAND_OMAP2) := board-flash.o -omap-flash-$(CONFIG_MTD_ONENAND_OMAP2) := board-flash.o -obj-y += $(omap-flash-y) $(omap-flash-m) - omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y) -obj-y += usb-musb.o obj-y += omap_phy_internal.o obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o -obj-y += usb-host.o onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o obj-y += $(onenand-m) $(onenand-y) nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o obj-y += $(nand-m) $(nand-y) - -smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o -obj-y += $(smsc911x-m) $(smsc911x-y) - -obj-y += common-board-devices.o twl-common.o dss-common.o diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c deleted file mode 100644 index 2188dc30e232..000000000000 --- a/arch/arm/mach-omap2/board-flash.c +++ /dev/null @@ -1,242 +0,0 @@ -/* - * board-flash.c - * Modified from mach-omap2/board-3430sdp-flash.c - * - * Copyright (C) 2009 Nokia Corporation - * Copyright (C) 2009 Texas Instruments - * - * Vimal Singh <vimalsingh@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/omap-gpmc.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/io.h> - -#include <linux/platform_data/mtd-nand-omap2.h> -#include <linux/platform_data/mtd-onenand-omap2.h> - -#include "soc.h" -#include "common.h" -#include "board-flash.h" - -#define REG_FPGA_REV 0x10 -#define REG_FPGA_DIP_SWITCH_INPUT2 0x60 -#define MAX_SUPPORTED_GPMC_CONFIG 3 - -#define DEBUG_BASE 0x08000000 /* debug board */ - -/* various memory sizes */ -#define FLASH_SIZE_SDPV1 SZ_64M /* NOR flash (64 Meg aligned) */ -#define FLASH_SIZE_SDPV2 SZ_128M /* NOR flash (256 Meg aligned) */ - -static struct physmap_flash_data board_nor_data = { - .width = 2, -}; - -static struct resource board_nor_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device board_nor_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &board_nor_data, - }, - .num_resources = 1, - .resource = &board_nor_resource, -}; - -static void -__init board_nor_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs) -{ - int err; - - board_nor_data.parts = nor_parts; - board_nor_data.nr_parts = nr_parts; - - /* Configure start address and size of NOR device */ - if (omap_rev() >= OMAP3430_REV_ES1_0) { - err = gpmc_cs_request(cs, FLASH_SIZE_SDPV2 - 1, - (unsigned long *)&board_nor_resource.start); - board_nor_resource.end = board_nor_resource.start - + FLASH_SIZE_SDPV2 - 1; - } else { - err = gpmc_cs_request(cs, FLASH_SIZE_SDPV1 - 1, - (unsigned long *)&board_nor_resource.start); - board_nor_resource.end = board_nor_resource.start - + FLASH_SIZE_SDPV1 - 1; - } - if (err < 0) { - pr_err("NOR: Can't request GPMC CS\n"); - return; - } - if (platform_device_register(&board_nor_device) < 0) - pr_err("Unable to register NOR device\n"); -} - -#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) -static struct omap_onenand_platform_data board_onenand_data = { - .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ -}; - -void -__init board_onenand_init(struct mtd_partition *onenand_parts, - u8 nr_parts, u8 cs) -{ - board_onenand_data.cs = cs; - board_onenand_data.parts = onenand_parts; - board_onenand_data.nr_parts = nr_parts; - - gpmc_onenand_init(&board_onenand_data); -} -#endif /* IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) */ - -#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2) - -/* Note that all values in this struct are in nanoseconds */ -struct gpmc_timings nand_default_timings[1] = { - { - .sync_clk = 0, - - .cs_on = 0, - .cs_rd_off = 36, - .cs_wr_off = 36, - - .we_on = 6, - .oe_on = 6, - - .adv_on = 6, - .adv_rd_off = 24, - .adv_wr_off = 36, - - .we_off = 30, - .oe_off = 48, - - .access = 54, - .rd_cycle = 72, - .wr_cycle = 72, - - .wr_access = 30, - .wr_data_mux_bus = 0, - }, -}; - -static struct omap_nand_platform_data board_nand_data; - -void -__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, - int nand_type, struct gpmc_timings *gpmc_t) -{ - board_nand_data.cs = cs; - board_nand_data.parts = nand_parts; - board_nand_data.nr_parts = nr_parts; - board_nand_data.devsize = nand_type; - - board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_SW; - gpmc_nand_init(&board_nand_data, gpmc_t); -} -#endif /* IS_ENABLED(CONFIG_MTD_NAND_OMAP2) */ - -/** - * get_gpmc0_type - Reads the FPGA DIP_SWITCH_INPUT_REGISTER2 to get - * the various cs values. - */ -static u8 get_gpmc0_type(void) -{ - u8 cs = 0; - void __iomem *fpga_map_addr; - - fpga_map_addr = ioremap(DEBUG_BASE, 4096); - if (!fpga_map_addr) - return -ENOMEM; - - if (!(readw_relaxed(fpga_map_addr + REG_FPGA_REV))) - /* we dont have an DEBUG FPGA??? */ - /* Depend on #defines!! default to strata boot return param */ - goto unmap; - - /* S8-DIP-OFF = 1, S8-DIP-ON = 0 */ - cs = readw_relaxed(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf; - - /* ES2.0 SDP's onwards 4 dip switches are provided for CS */ - if (omap_rev() >= OMAP3430_REV_ES1_0) - /* change (S8-1:4=DS-2:0) to (S8-4:1=DS-2:0) */ - cs = ((cs & 8) >> 3) | ((cs & 4) >> 1) | - ((cs & 2) << 1) | ((cs & 1) << 3); - else - /* change (S8-1:3=DS-2:0) to (S8-3:1=DS-2:0) */ - cs = ((cs & 4) >> 2) | (cs & 2) | ((cs & 1) << 2); -unmap: - iounmap(fpga_map_addr); - return cs; -} - -/** - * board_flash_init - Identify devices connected to GPMC and register. - * - * @return - void. - */ -void __init board_flash_init(struct flash_partitions partition_info[], - char chip_sel_board[][GPMC_CS_NUM], int nand_type) -{ - u8 cs = 0; - u8 norcs = GPMC_CS_NUM + 1; - u8 nandcs = GPMC_CS_NUM + 1; - u8 onenandcs = GPMC_CS_NUM + 1; - u8 idx; - unsigned char *config_sel = NULL; - - /* REVISIT: Is this return correct idx for 2430 SDP? - * for which cs configuration matches for 2430 SDP? - */ - idx = get_gpmc0_type(); - if (idx >= MAX_SUPPORTED_GPMC_CONFIG) { - pr_err("%s: Invalid chip select: %d\n", __func__, cs); - return; - } - config_sel = (unsigned char *)(chip_sel_board[idx]); - - while (cs < GPMC_CS_NUM) { - switch (config_sel[cs]) { - case PDC_NOR: - if (norcs > GPMC_CS_NUM) - norcs = cs; - break; - case PDC_NAND: - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - break; - case PDC_ONENAND: - if (onenandcs > GPMC_CS_NUM) - onenandcs = cs; - break; - } - cs++; - } - - if (norcs > GPMC_CS_NUM) - pr_err("NOR: Unable to find configuration in GPMC\n"); - else - board_nor_init(partition_info[0].parts, - partition_info[0].nr_parts, norcs); - - if (onenandcs > GPMC_CS_NUM) - pr_err("OneNAND: Unable to find configuration in GPMC\n"); - else - board_onenand_init(partition_info[1].parts, - partition_info[1].nr_parts, onenandcs); - - if (nandcs > GPMC_CS_NUM) - pr_err("NAND: Unable to find configuration in GPMC\n"); - else - board_nand_init(partition_info[2].parts, - partition_info[2].nr_parts, nandcs, - nand_type, nand_default_timings); -} diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h deleted file mode 100644 index 8b39eec07318..000000000000 --- a/arch/arm/mach-omap2/board-flash.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * board-sdp.h - * - * Information structures for SDP-specific board config data - * - * Copyright (C) 2009 Nokia Corporation - * Copyright (C) 2009 Texas Instruments - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#define PDC_NOR 1 -#define PDC_NAND 2 -#define PDC_ONENAND 3 -#define DBG_MPDB 4 - -struct flash_partitions { - struct mtd_partition *parts; - int nr_parts; -}; - -#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2) || IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) -extern void board_flash_init(struct flash_partitions [], - char chip_sel[][GPMC_CS_NUM], int nand_type); -#else -static inline void board_flash_init(struct flash_partitions part[], - char chip_sel[][GPMC_CS_NUM], int nand_type) -{ -} -#endif - -#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2) -extern void board_nand_init(struct mtd_partition *nand_parts, - u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t); -extern struct gpmc_timings nand_default_timings[]; -#else -static inline void board_nand_init(struct mtd_partition *nand_parts, - u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t) -{ -} -#define nand_default_timings NULL -#endif - -#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) -extern void board_onenand_init(struct mtd_partition *nand_parts, - u8 nr_parts, u8 cs); -#else -static inline void board_onenand_init(struct mtd_partition *nand_parts, - u8 nr_parts, u8 cs) -{ -} -#endif diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index bab814d2f37d..36d9943205ca 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -30,8 +30,6 @@ static const struct of_device_id omap_dt_match_table[] __initconst = { static void __init omap_generic_init(void) { - omapdss_early_init_of(); - pdata_quirks_init(omap_dt_match_table); omapdss_init_of(); @@ -341,6 +339,7 @@ static const char *const dra72x_boards_compat[] __initconst = { "ti,am5718", "ti,am5716", "ti,dra722", + "ti,dra718", NULL, }; diff --git a/arch/arm/mach-omap2/clockdomains7xx_data.c b/arch/arm/mach-omap2/clockdomains7xx_data.c index ef9ed36e8a61..6c679659cda5 100644 --- a/arch/arm/mach-omap2/clockdomains7xx_data.c +++ b/arch/arm/mach-omap2/clockdomains7xx_data.c @@ -409,7 +409,7 @@ static struct clockdomain l4sec_7xx_clkdm = { .dep_bit = DRA7XX_L4SEC_STATDEP_SHIFT, .wkdep_srcs = l4sec_wkup_sleep_deps, .sleepdep_srcs = l4sec_wkup_sleep_deps, - .flags = CLKDM_CAN_HWSUP_SWSUP, + .flags = CLKDM_CAN_SWSUP, }; static struct clockdomain l3main1_7xx_clkdm = { diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c deleted file mode 100644 index 5388fcd3de72..000000000000 --- a/arch/arm/mach-omap2/common-board-devices.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * common-board-devices.c - * - * Copyright (C) 2011 CompuLab, Ltd. - * Author: Mike Rapoport <mike@compulab.co.il> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/gpio.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> - -#include <linux/platform_data/spi-omap2-mcspi.h> - -#include "common.h" -#include "common-board-devices.h" - -#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846) -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, -}; - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .gpio_pendown = -EINVAL, - .keep_vref_on = 1, -}; - -static struct spi_board_info ads7846_spi_board_info __initdata = { - .modalias = "ads7846", - .bus_num = -EINVAL, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = -EINVAL, - .platform_data = &ads7846_config, -}; - -void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, - struct ads7846_platform_data *board_pdata) -{ - struct spi_board_info *spi_bi = &ads7846_spi_board_info; - int err; - - /* - * If a board defines get_pendown_state() function, request the pendown - * GPIO and set the GPIO debounce time. - * If a board does not define the get_pendown_state() function, then - * the ads7846 driver will setup the pendown GPIO itself. - */ - if (board_pdata && board_pdata->get_pendown_state) { - err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); - if (err) { - pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); - return; - } - - if (gpio_debounce) - gpio_set_debounce(gpio_pendown, gpio_debounce); - - gpio_export(gpio_pendown, 0); - } - - spi_bi->bus_num = bus_num; - spi_bi->irq = gpio_to_irq(gpio_pendown); - - ads7846_config.gpio_pendown = gpio_pendown; - - if (board_pdata) { - board_pdata->gpio_pendown = gpio_pendown; - board_pdata->gpio_pendown_debounce = gpio_debounce; - spi_bi->platform_data = board_pdata; - } - - spi_register_board_info(&ads7846_spi_board_info, 1); -} -#else -void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, - struct ads7846_platform_data *board_pdata) -{ -} -#endif diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index 07c88ae083fb..335c7822fea1 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -3,15 +3,7 @@ #include <sound/tlv320aic3x.h> #include <linux/mfd/menelaus.h> -#include "twl-common.h" -#define NAND_BLOCK_SIZE SZ_128K - -struct mtd_partition; -struct ads7846_platform_data; - -void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, - struct ads7846_platform_data *board_pdata); void *n8x0_legacy_init(void); extern struct menelaus_platform_data n8x0_menelaus_platform_data; diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index deed42e1dd9c..c4f2ace91ea2 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -77,15 +77,6 @@ static inline int omap4_pm_init_early(void) } #endif -#ifdef CONFIG_OMAP_MUX -int omap_mux_late_init(void); -#else -static inline int omap_mux_late_init(void) -{ - return 0; -} -#endif - extern void omap2_init_common_infrastructure(void); extern void omap_init_time(void); @@ -262,8 +253,6 @@ extern void __iomem *omap4_get_sar_ram_base(void); extern void omap4_mpuss_early_init(void); extern void omap_do_wfi(void); -extern void omap4_secondary_startup(void); -extern void omap4460_secondary_startup(void); #ifdef CONFIG_SMP /* Needed for secondary core boot */ @@ -275,16 +264,11 @@ extern void omap4_cpu_die(unsigned int cpu); extern int omap4_cpu_kill(unsigned int cpu); extern const struct smp_operations omap4_smp_ops; - -extern void omap5_secondary_startup(void); -extern void omap5_secondary_hyp_startup(void); #endif #if defined(CONFIG_SMP) && defined(CONFIG_PM) extern int omap4_mpuss_init(void); extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state); -extern int omap4_finish_suspend(unsigned long cpu_state); -extern void omap4_cpu_resume(void); extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state); #else static inline int omap4_enter_lowpower(unsigned int cpu, @@ -305,14 +289,41 @@ static inline int omap4_mpuss_init(void) return 0; } +#endif + +#ifdef CONFIG_ARCH_OMAP4 +void omap4_secondary_startup(void); +void omap4460_secondary_startup(void); +int omap4_finish_suspend(unsigned long cpu_state); +void omap4_cpu_resume(void); +#else +static inline void omap4_secondary_startup(void) +{ +} + +static inline void omap4460_secondary_startup(void) +{ +} static inline int omap4_finish_suspend(unsigned long cpu_state) { return 0; } - static inline void omap4_cpu_resume(void) -{} +{ +} +#endif +#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) +void omap5_secondary_startup(void); +void omap5_secondary_hyp_startup(void); +#else +static inline void omap5_secondary_startup(void) +{ +} + +static inline void omap5_secondary_hyp_startup(void) +{ +} #endif void pdata_quirks_init(const struct of_device_id *); @@ -332,7 +343,6 @@ extern int omap_dss_reset(struct omap_hwmod *); int omap_clk_init(void); int __init omapdss_init_of(void); -void __init omapdss_early_init_of(void); #endif /* __ASSEMBLER__ */ #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index fa138d4032b6..a8b291f00109 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -21,6 +21,7 @@ #include "common.h" #include "pm.h" #include "prm.h" +#include "soc.h" #include "clockdomain.h" #define MAX_CPUS 2 @@ -30,6 +31,7 @@ struct idle_statedata { u32 cpu_state; u32 mpu_logic_state; u32 mpu_state; + u32 mpu_state_vote; }; static struct idle_statedata omap4_idle_data[] = { @@ -50,12 +52,26 @@ static struct idle_statedata omap4_idle_data[] = { }, }; +static struct idle_statedata omap5_idle_data[] = { + { + .cpu_state = PWRDM_POWER_ON, + .mpu_state = PWRDM_POWER_ON, + .mpu_logic_state = PWRDM_POWER_ON, + }, + { + .cpu_state = PWRDM_POWER_RET, + .mpu_state = PWRDM_POWER_RET, + .mpu_logic_state = PWRDM_POWER_RET, + }, +}; + static struct powerdomain *mpu_pd, *cpu_pd[MAX_CPUS]; static struct clockdomain *cpu_clkdm[MAX_CPUS]; static atomic_t abort_barrier; static bool cpu_done[MAX_CPUS]; static struct idle_statedata *state_ptr = &omap4_idle_data[0]; +static DEFINE_RAW_SPINLOCK(mpu_lock); /* Private functions */ @@ -77,6 +93,32 @@ static int omap_enter_idle_simple(struct cpuidle_device *dev, return index; } +static int omap_enter_idle_smp(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + struct idle_statedata *cx = state_ptr + index; + unsigned long flag; + + raw_spin_lock_irqsave(&mpu_lock, flag); + cx->mpu_state_vote++; + if (cx->mpu_state_vote == num_online_cpus()) { + pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state); + omap_set_pwrdm_state(mpu_pd, cx->mpu_state); + } + raw_spin_unlock_irqrestore(&mpu_lock, flag); + + omap4_enter_lowpower(dev->cpu, cx->cpu_state); + + raw_spin_lock_irqsave(&mpu_lock, flag); + if (cx->mpu_state_vote == num_online_cpus()) + omap_set_pwrdm_state(mpu_pd, PWRDM_POWER_ON); + cx->mpu_state_vote--; + raw_spin_unlock_irqrestore(&mpu_lock, flag); + + return index; +} + static int omap_enter_idle_coupled(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) @@ -220,6 +262,32 @@ static struct cpuidle_driver omap4_idle_driver = { .safe_state_index = 0, }; +static struct cpuidle_driver omap5_idle_driver = { + .name = "omap5_idle", + .owner = THIS_MODULE, + .states = { + { + /* C1 - CPU0 ON + CPU1 ON + MPU ON */ + .exit_latency = 2 + 2, + .target_residency = 5, + .enter = omap_enter_idle_simple, + .name = "C1", + .desc = "CPUx WFI, MPUSS ON" + }, + { + /* C2 - CPU0 RET + CPU1 RET + MPU CSWR */ + .exit_latency = 48 + 60, + .target_residency = 100, + .flags = CPUIDLE_FLAG_TIMER_STOP, + .enter = omap_enter_idle_smp, + .name = "C2", + .desc = "CPUx CSWR, MPUSS CSWR", + }, + }, + .state_count = ARRAY_SIZE(omap5_idle_data), + .safe_state_index = 0, +}; + /* Public functions */ /** @@ -230,6 +298,16 @@ static struct cpuidle_driver omap4_idle_driver = { */ int __init omap4_idle_init(void) { + struct cpuidle_driver *idle_driver; + + if (soc_is_omap54xx()) { + state_ptr = &omap5_idle_data[0]; + idle_driver = &omap5_idle_driver; + } else { + state_ptr = &omap4_idle_data[0]; + idle_driver = &omap4_idle_driver; + } + mpu_pd = pwrdm_lookup("mpu_pwrdm"); cpu_pd[0] = pwrdm_lookup("cpu0_pwrdm"); cpu_pd[1] = pwrdm_lookup("cpu1_pwrdm"); @@ -244,5 +322,5 @@ int __init omap4_idle_init(void) /* Configure the broadcast timer on each cpu */ on_each_cpu(omap_setup_broadcast_timer, NULL, 1); - return cpuidle_register(&omap4_idle_driver, cpu_online_mask); + return cpuidle_register(idle_driver, cpu_online_mask); } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 60a20f3b44de..3fdb94599184 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -30,7 +30,6 @@ #include "soc.h" #include "common.h" -#include "mux.h" #include "control.h" #include "display.h" diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 70b3eaf085e4..e71cca0950e9 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -565,11 +565,6 @@ int omap_dss_reset(struct omap_hwmod *oh) return r; } -void __init omapdss_early_init_of(void) -{ - -} - static const char * const omapdss_compat_names[] __initconst = { "ti,omap2-dss", "ti,omap3-dss", diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c deleted file mode 100644 index 1d583bc0b1a9..000000000000 --- a/arch/arm/mach-omap2/dss-common.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2012 Texas Instruments, Inc.. - * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -/* - * NOTE: this is a transitional file to help with DT adaptation. - * This file will be removed when DSS supports DT. - */ - -#include <linux/kernel.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <linux/platform_data/omapdss.h> -#include <video/omap-panel-data.h> - -#include "soc.h" -#include "dss-common.h" -#include "mux.h" -#include "display.h" - diff --git a/arch/arm/mach-omap2/dss-common.h b/arch/arm/mach-omap2/dss-common.h deleted file mode 100644 index a9becf0d5be8..000000000000 --- a/arch/arm/mach-omap2/dss-common.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __OMAP_DSS_COMMON__ -#define __OMAP_DSS_COMMON__ - -/* - * NOTE: this is a transitional file to help with DT adaptation. - * This file will be removed when DSS supports DT. - */ - -void __init omap4_panda_display_init_of(void); -void __init omap_4430sdp_display_init_of(void); -void __init omap3_igep2_display_init_of(void); - -#endif diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c deleted file mode 100644 index 2757504a13c4..000000000000 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/gpmc-smsc911x.c - * - * Copyright (C) 2009 Li-Pro.Net - * Stephan Linz <linz@li-pro.net> - * - * Modified from linux/arch/arm/mach-omap2/gpmc-smc91x.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#define pr_fmt(fmt) "%s: " fmt, __func__ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/smsc911x.h> - -#include "gpmc.h" -#include "gpmc-smsc911x.h" - -static struct resource gpmc_smsc911x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config gpmc_smsc911x_config = { - .phy_interface = PHY_INTERFACE_MODE_MII, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, -}; - -/* - * Initialize smsc911x device connected to the GPMC. Note that we - * assume that pin multiplexing is done in the board-*.c file, - * or in the bootloader. - */ -void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *gpmc_cfg) -{ - struct platform_device *pdev; - unsigned long cs_mem_base; - int ret; - - if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { - pr_err("Failed to request GPMC mem region\n"); - return; - } - - gpmc_smsc911x_resources[0].start = cs_mem_base + 0x0; - gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff; - - if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "smsc911x irq")) { - pr_err("Failed to request IRQ GPIO%d\n", gpmc_cfg->gpio_irq); - goto free1; - } - - gpmc_smsc911x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); - - if (gpio_is_valid(gpmc_cfg->gpio_reset)) { - ret = gpio_request_one(gpmc_cfg->gpio_reset, - GPIOF_OUT_INIT_HIGH, "smsc911x reset"); - if (ret) { - pr_err("Failed to request reset GPIO%d\n", - gpmc_cfg->gpio_reset); - goto free2; - } - - gpio_set_value(gpmc_cfg->gpio_reset, 0); - msleep(100); - gpio_set_value(gpmc_cfg->gpio_reset, 1); - } - - gpmc_smsc911x_config.flags = gpmc_cfg->flags ? : SMSC911X_USE_16BIT; - - pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id, - gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources), - &gpmc_smsc911x_config, sizeof(gpmc_smsc911x_config)); - if (IS_ERR(pdev)) { - pr_err("Unable to register platform device\n"); - gpio_free(gpmc_cfg->gpio_reset); - goto free2; - } - - return; - -free2: - gpio_free(gpmc_cfg->gpio_irq); -free1: - gpmc_cs_free(gpmc_cfg->cs); - - pr_err("Could not initialize smsc911x device\n"); -} diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.h b/arch/arm/mach-omap2/gpmc-smsc911x.h deleted file mode 100644 index 99a05b8412fa..000000000000 --- a/arch/arm/mach-omap2/gpmc-smsc911x.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/plat-omap/include/plat/gpmc-smsc911x.h - * - * Copyright (C) 2009 Li-Pro.Net - * Stephan Linz <linz@li-pro.net> - * - * Modified from arch/arm/plat-omap/include/plat/gpmc-smc91x.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__ - -struct omap_smsc911x_platform_data { - int id; - int cs; - int gpio_irq; - int gpio_reset; - u32 flags; -}; - -#if IS_ENABLED(CONFIG_SMSC911X) - -extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d); - -#else - -static inline void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d) -{ -} - -#endif -#endif diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 478097741bce..cb754c46747e 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -22,7 +22,6 @@ #include "omap_device.h" #include "omap-pm.h" -#include "mux.h" #include "hsmmc.h" #include "control.h" @@ -147,91 +146,6 @@ static int nop_mmc_set_power(struct device *dev, int power_on, int vdd) return 0; } -static inline void omap_hsmmc_mux(struct omap_hsmmc_platform_data - *mmc_controller, int controller_nr) -{ - if (gpio_is_valid(mmc_controller->gpio_cd) && - (mmc_controller->gpio_cd < OMAP_MAX_GPIO_LINES)) - omap_mux_init_gpio(mmc_controller->gpio_cd, - OMAP_PIN_INPUT_PULLUP); - if (gpio_is_valid(mmc_controller->gpio_cod) && - (mmc_controller->gpio_cod < OMAP_MAX_GPIO_LINES)) - omap_mux_init_gpio(mmc_controller->gpio_cod, - OMAP_PIN_INPUT_PULLUP); - if (gpio_is_valid(mmc_controller->gpio_wp) && - (mmc_controller->gpio_wp < OMAP_MAX_GPIO_LINES)) - omap_mux_init_gpio(mmc_controller->gpio_wp, - OMAP_PIN_INPUT_PULLUP); - if (cpu_is_omap34xx()) { - if (controller_nr == 0) { - omap_mux_init_signal("sdmmc1_clk", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_cmd", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_dat0", - OMAP_PIN_INPUT_PULLUP); - if (mmc_controller->caps & - (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { - omap_mux_init_signal("sdmmc1_dat1", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_dat2", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_dat3", - OMAP_PIN_INPUT_PULLUP); - } - if (mmc_controller->caps & - MMC_CAP_8_BIT_DATA) { - omap_mux_init_signal("sdmmc1_dat4", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_dat5", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_dat6", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_dat7", - OMAP_PIN_INPUT_PULLUP); - } - } - if (controller_nr == 1) { - /* MMC2 */ - omap_mux_init_signal("sdmmc2_clk", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_cmd", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_dat0", - OMAP_PIN_INPUT_PULLUP); - - /* - * For 8 wire configurations, Lines DAT4, 5, 6 and 7 - * need to be muxed in the board-*.c files - */ - if (mmc_controller->caps & - (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { - omap_mux_init_signal("sdmmc2_dat1", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_dat2", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_dat3", - OMAP_PIN_INPUT_PULLUP); - } - if (mmc_controller->caps & - MMC_CAP_8_BIT_DATA) { - omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7", - OMAP_PIN_INPUT_PULLUP); - } - } - - /* - * For MMC3 the pins need to be muxed in the board-*.c files - */ - } -} - static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, struct omap_hsmmc_platform_data *mmc) { @@ -410,8 +324,6 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, if (res < 0) goto free_mmc; - omap_hsmmc_mux(mmc_data, (ctrl_nr - 1)); - name = "omap_hsmmc"; res = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN, "mmc%d", ctrl_nr); diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index b9d8e47ffe8e..91a21c3923b2 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -26,7 +26,6 @@ #include "prm.h" #include "common.h" -#include "mux.h" #include "i2c.h" /* In register I2C_CON, Bit 15 is the I2C enable bit */ @@ -36,20 +35,6 @@ #define MAX_OMAP_I2C_HWMOD_NAME_LEN 16 -static void __init omap2_i2c_mux_pins(int bus_id) -{ - char mux_name[sizeof("i2c2_scl.i2c2_scl")]; - - /* First I2C bus is not muxable */ - if (bus_id == 1) - return; - - sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id); - omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); - sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id); - omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); -} - /** * omap_i2c_reset - reset the omap i2c module. * @oh: struct omap_hwmod * @@ -107,85 +92,3 @@ int omap_i2c_reset(struct omap_hwmod *oh) return 0; } - -static int __init omap_i2c_nr_ports(void) -{ - int ports = 0; - - if (cpu_is_omap24xx()) - ports = 2; - else if (cpu_is_omap34xx()) - ports = 3; - else if (cpu_is_omap44xx()) - ports = 4; - return ports; -} - -/* - * XXX This function is a temporary compatibility wrapper - only - * needed until the I2C driver can be converted to call - * omap_pm_set_max_dev_wakeup_lat() and handle a return code. - */ -static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t) -{ - omap_pm_set_max_mpu_wakeup_lat(dev, t); -} - -static const char name[] = "omap_i2c"; - -int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, - int bus_id) -{ - int l; - struct omap_hwmod *oh; - struct platform_device *pdev; - char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN]; - struct omap_i2c_bus_platform_data *pdata; - struct omap_i2c_dev_attr *dev_attr; - - if (bus_id > omap_i2c_nr_ports()) - return -EINVAL; - - omap2_i2c_mux_pins(bus_id); - - l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id); - WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN, - "String buffer overflow in I2C%d device setup\n", bus_id); - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up %s\n", oh_name); - return -EEXIST; - } - - pdata = i2c_pdata; - /* - * pass the hwmod class's CPU-specific knowledge of I2C IP revision in - * use, and functionality implementation flags, up to the OMAP I2C - * driver via platform data - */ - pdata->rev = oh->class->rev; - - dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; - pdata->flags = dev_attr->flags; - - /* - * When waiting for completion of a i2c transfer, we need to - * set a wake up latency constraint for the MPU. This is to - * ensure quick enough wakeup from idle, when transfer - * completes. - * Only omap3 has support for constraints - */ - if (cpu_is_omap34xx()) - pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat; - pdev = omap_device_build(name, bus_id, oh, pdata, - sizeof(struct omap_i2c_bus_platform_data)); - WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name); - - return PTR_ERR_OR_ZERO(pdev); -} - -static int __init omap_i2c_cmdline(void) -{ - return omap_register_i2c_bus_cmdline(); -} -omap_subsys_initcall(omap_i2c_cmdline); diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 2abd53ae3e7a..cc6d9fa60924 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -205,11 +205,15 @@ void __init omap2xxx_check_revision(void) #define OMAP3_SHOW_FEATURE(feat) \ if (omap3_has_ ##feat()) \ - printk(#feat" "); + n += scnprintf(buf + n, sizeof(buf) - n, #feat " "); static void __init omap3_cpuinfo(void) { const char *cpu_name; + char buf[64]; + int n = 0; + + memset(buf, 0, sizeof(buf)); /* * OMAP3430 and OMAP3530 are assumed to be same. @@ -241,10 +245,10 @@ static void __init omap3_cpuinfo(void) cpu_name = "OMAP3503"; } - sprintf(soc_name, "%s", cpu_name); + scnprintf(soc_name, sizeof(soc_name), "%s", cpu_name); /* Print verbose information */ - pr_info("%s %s (", soc_name, soc_rev); + n += scnprintf(buf, sizeof(buf) - n, "%s %s (", soc_name, soc_rev); OMAP3_SHOW_FEATURE(l2cache); OMAP3_SHOW_FEATURE(iva); @@ -252,8 +256,10 @@ static void __init omap3_cpuinfo(void) OMAP3_SHOW_FEATURE(neon); OMAP3_SHOW_FEATURE(isp); OMAP3_SHOW_FEATURE(192mhz_clk); - - printk(")\n"); + if (*(buf + n - 1) == ' ') + n--; + n += scnprintf(buf + n, sizeof(buf) - n, ")\n"); + pr_info("%s", buf); } #define OMAP3_CHECK_FEATURE(status,feat) \ diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 0e9acdd95d70..5aafb8449c40 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -427,7 +427,6 @@ static void __init omap_hwmod_init_postsetup(void) static void __init __maybe_unused omap_common_late_init(void) { - omap_mux_late_init(); omap2_common_pm_late_init(); omap_soc_device_init(); } @@ -717,10 +716,11 @@ void __init omap5_init_early(void) OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE)); omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE)); omap2_control_base_init(); - omap4_pm_init_early(); omap2_prcm_base_init(); omap5xxx_check_revision(); omap4_sar_ram_init(); + omap4_mpuss_early_init(); + omap4_pm_init_early(); omap54xx_voltagedomains_init(); omap54xx_powerdomains_init(); omap54xx_clockdomains_init(); diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c index 8bdf182422bd..5a3bc3de58d0 100644 --- a/arch/arm/mach-omap2/msdi.c +++ b/arch/arm/mach-omap2/msdi.c @@ -30,7 +30,6 @@ #include "control.h" #include "omap_hwmod.h" #include "omap_device.h" -#include "mux.h" #include "mmc.h" /* diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c deleted file mode 100644 index 176eef6ef338..000000000000 --- a/arch/arm/mach-omap2/mux.c +++ /dev/null @@ -1,1153 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/mux.c - * - * OMAP2, OMAP3 and OMAP4 pin multiplexing configurations - * - * Copyright (C) 2004 - 2010 Texas Instruments Inc. - * Copyright (C) 2003 - 2008 Nokia Corporation - * - * Written by Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/list.h> -#include <linux/slab.h> -#include <linux/ctype.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <linux/uaccess.h> -#include <linux/irq.h> -#include <linux/interrupt.h> - - -#include "omap_hwmod.h" - -#include "soc.h" -#include "control.h" -#include "mux.h" -#include "prm.h" -#include "common.h" - -#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */ -#define OMAP_MUX_BASE_SZ 0x5ca - -struct omap_mux_entry { - struct omap_mux mux; - struct list_head node; -}; - -static LIST_HEAD(mux_partitions); -static DEFINE_MUTEX(muxmode_mutex); - -struct omap_mux_partition *omap_mux_get(const char *name) -{ - struct omap_mux_partition *partition; - - list_for_each_entry(partition, &mux_partitions, node) { - if (!strcmp(name, partition->name)) - return partition; - } - - return NULL; -} - -u16 omap_mux_read(struct omap_mux_partition *partition, u16 reg) -{ - if (partition->flags & OMAP_MUX_REG_8BIT) - return readb_relaxed(partition->base + reg); - else - return readw_relaxed(partition->base + reg); -} - -void omap_mux_write(struct omap_mux_partition *partition, u16 val, - u16 reg) -{ - if (partition->flags & OMAP_MUX_REG_8BIT) - writeb_relaxed(val, partition->base + reg); - else - writew_relaxed(val, partition->base + reg); -} - -void omap_mux_write_array(struct omap_mux_partition *partition, - struct omap_board_mux *board_mux) -{ - if (!board_mux) - return; - - while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) { - omap_mux_write(partition, board_mux->value, - board_mux->reg_offset); - board_mux++; - } -} - -#ifdef CONFIG_OMAP_MUX - -static char *omap_mux_options; - -static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition, - int gpio, int val) -{ - struct omap_mux_entry *e; - struct omap_mux *gpio_mux = NULL; - u16 old_mode; - u16 mux_mode; - int found = 0; - struct list_head *muxmodes = &partition->muxmodes; - - if (!gpio) - return -EINVAL; - - list_for_each_entry(e, muxmodes, node) { - struct omap_mux *m = &e->mux; - if (gpio == m->gpio) { - gpio_mux = m; - found++; - } - } - - if (found == 0) { - pr_err("%s: Could not set gpio%i\n", __func__, gpio); - return -ENODEV; - } - - if (found > 1) { - pr_info("%s: Multiple gpio paths (%d) for gpio%i\n", __func__, - found, gpio); - return -EINVAL; - } - - old_mode = omap_mux_read(partition, gpio_mux->reg_offset); - mux_mode = val & ~(OMAP_MUX_NR_MODES - 1); - mux_mode |= partition->gpio; - pr_debug("%s: Setting signal %s.gpio%i 0x%04x -> 0x%04x\n", __func__, - gpio_mux->muxnames[0], gpio, old_mode, mux_mode); - omap_mux_write(partition, mux_mode, gpio_mux->reg_offset); - - return 0; -} - -int __init omap_mux_init_gpio(int gpio, int val) -{ - struct omap_mux_partition *partition; - int ret; - - list_for_each_entry(partition, &mux_partitions, node) { - ret = _omap_mux_init_gpio(partition, gpio, val); - if (!ret) - return ret; - } - - return -ENODEV; -} - -static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, - const char *muxname, - struct omap_mux **found_mux) -{ - struct omap_mux *mux = NULL; - struct omap_mux_entry *e; - const char *mode_name; - int found = 0, found_mode = 0, mode0_len = 0; - struct list_head *muxmodes = &partition->muxmodes; - - mode_name = strchr(muxname, '.'); - if (mode_name) { - mode0_len = strlen(muxname) - strlen(mode_name); - mode_name++; - } else { - mode_name = muxname; - } - - list_for_each_entry(e, muxmodes, node) { - char *m0_entry; - int i; - - mux = &e->mux; - m0_entry = mux->muxnames[0]; - - /* First check for full name in mode0.muxmode format */ - if (mode0_len) - if (strncmp(muxname, m0_entry, mode0_len) || - (strlen(m0_entry) != mode0_len)) - continue; - - /* Then check for muxmode only */ - for (i = 0; i < OMAP_MUX_NR_MODES; i++) { - char *mode_cur = mux->muxnames[i]; - - if (!mode_cur) - continue; - - if (!strcmp(mode_name, mode_cur)) { - *found_mux = mux; - found++; - found_mode = i; - } - } - } - - if (found == 1) { - return found_mode; - } - - if (found > 1) { - pr_err("%s: Multiple signal paths (%i) for %s\n", __func__, - found, muxname); - return -EINVAL; - } - - return -ENODEV; -} - -int __init omap_mux_get_by_name(const char *muxname, - struct omap_mux_partition **found_partition, - struct omap_mux **found_mux) -{ - struct omap_mux_partition *partition; - - list_for_each_entry(partition, &mux_partitions, node) { - struct omap_mux *mux = NULL; - int mux_mode = _omap_mux_get_by_name(partition, muxname, &mux); - if (mux_mode < 0) - continue; - - *found_partition = partition; - *found_mux = mux; - - return mux_mode; - } - - pr_err("%s: Could not find signal %s\n", __func__, muxname); - - return -ENODEV; -} - -int __init omap_mux_init_signal(const char *muxname, int val) -{ - struct omap_mux_partition *partition = NULL; - struct omap_mux *mux = NULL; - u16 old_mode; - int mux_mode; - - mux_mode = omap_mux_get_by_name(muxname, &partition, &mux); - if (mux_mode < 0 || !mux) - return mux_mode; - - old_mode = omap_mux_read(partition, mux->reg_offset); - mux_mode |= val; - pr_debug("%s: Setting signal %s 0x%04x -> 0x%04x\n", - __func__, muxname, old_mode, mux_mode); - omap_mux_write(partition, mux_mode, mux->reg_offset); - - return 0; -} - -struct omap_hwmod_mux_info * __init -omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads) -{ - struct omap_hwmod_mux_info *hmux; - int i, nr_pads_dynamic = 0; - - if (!bpads || nr_pads < 1) - return NULL; - - hmux = kzalloc(sizeof(struct omap_hwmod_mux_info), GFP_KERNEL); - if (!hmux) - goto err1; - - hmux->nr_pads = nr_pads; - - hmux->pads = kzalloc(sizeof(struct omap_device_pad) * - nr_pads, GFP_KERNEL); - if (!hmux->pads) - goto err2; - - for (i = 0; i < hmux->nr_pads; i++) { - struct omap_mux_partition *partition; - struct omap_device_pad *bpad = &bpads[i], *pad = &hmux->pads[i]; - struct omap_mux *mux; - int mux_mode; - - mux_mode = omap_mux_get_by_name(bpad->name, &partition, &mux); - if (mux_mode < 0) - goto err3; - if (!pad->partition) - pad->partition = partition; - if (!pad->mux) - pad->mux = mux; - - pad->name = kzalloc(strlen(bpad->name) + 1, GFP_KERNEL); - if (!pad->name) { - int j; - - for (j = i - 1; j >= 0; j--) - kfree(hmux->pads[j].name); - goto err3; - } - strcpy(pad->name, bpad->name); - - pad->flags = bpad->flags; - pad->enable = bpad->enable; - pad->idle = bpad->idle; - pad->off = bpad->off; - - if (pad->flags & - (OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP)) - nr_pads_dynamic++; - - pr_debug("%s: Initialized %s\n", __func__, pad->name); - } - - if (!nr_pads_dynamic) - return hmux; - - /* - * Add pads that need dynamic muxing into a separate list - */ - - hmux->nr_pads_dynamic = nr_pads_dynamic; - hmux->pads_dynamic = kzalloc(sizeof(struct omap_device_pad *) * - nr_pads_dynamic, GFP_KERNEL); - if (!hmux->pads_dynamic) { - pr_err("%s: Could not allocate dynamic pads\n", __func__); - return hmux; - } - - nr_pads_dynamic = 0; - for (i = 0; i < hmux->nr_pads; i++) { - struct omap_device_pad *pad = &hmux->pads[i]; - - if (pad->flags & - (OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP)) { - pr_debug("%s: pad %s tagged dynamic\n", - __func__, pad->name); - hmux->pads_dynamic[nr_pads_dynamic] = pad; - nr_pads_dynamic++; - } - } - - return hmux; - -err3: - kfree(hmux->pads); -err2: - kfree(hmux); -err1: - pr_err("%s: Could not allocate device mux entry\n", __func__); - - return NULL; -} - -/** - * omap_hwmod_mux_scan_wakeups - omap hwmod scan wakeup pads - * @hmux: Pads for a hwmod - * @mpu_irqs: MPU irq array for a hwmod - * - * Scans the wakeup status of pads for a single hwmod. If an irq - * array is defined for this mux, the parser will call the registered - * ISRs for corresponding pads, otherwise the parser will stop at the - * first wakeup active pad and return. Returns true if there is a - * pending and non-served wakeup event for the mux, otherwise false. - */ -static bool omap_hwmod_mux_scan_wakeups(struct omap_hwmod_mux_info *hmux, - struct omap_hwmod_irq_info *mpu_irqs) -{ - int i, irq; - unsigned int val; - u32 handled_irqs = 0; - - for (i = 0; i < hmux->nr_pads_dynamic; i++) { - struct omap_device_pad *pad = hmux->pads_dynamic[i]; - - if (!(pad->flags & OMAP_DEVICE_PAD_WAKEUP) || - !(pad->idle & OMAP_WAKEUP_EN)) - continue; - - val = omap_mux_read(pad->partition, pad->mux->reg_offset); - if (!(val & OMAP_WAKEUP_EVENT)) - continue; - - if (!hmux->irqs) - return true; - - irq = hmux->irqs[i]; - /* make sure we only handle each irq once */ - if (handled_irqs & 1 << irq) - continue; - - handled_irqs |= 1 << irq; - - generic_handle_irq(mpu_irqs[irq].irq); - } - - return false; -} - -/** - * _omap_hwmod_mux_handle_irq - Process wakeup events for a single hwmod - * - * Checks a single hwmod for every wakeup capable pad to see if there is an - * active wakeup event. If this is the case, call the corresponding ISR. - */ -static int _omap_hwmod_mux_handle_irq(struct omap_hwmod *oh, void *data) -{ - if (!oh->mux || !oh->mux->enabled) - return 0; - if (omap_hwmod_mux_scan_wakeups(oh->mux, oh->mpu_irqs)) - generic_handle_irq(oh->mpu_irqs[0].irq); - return 0; -} - -/** - * omap_hwmod_mux_handle_irq - Process pad wakeup irqs. - * - * Calls a function for each registered omap_hwmod to check - * pad wakeup statuses. - */ -static irqreturn_t omap_hwmod_mux_handle_irq(int irq, void *unused) -{ - omap_hwmod_for_each(_omap_hwmod_mux_handle_irq, NULL); - return IRQ_HANDLED; -} - -/* Assumes the calling function takes care of locking */ -void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state) -{ - int i; - - /* Runtime idling of dynamic pads */ - if (state == _HWMOD_STATE_IDLE && hmux->enabled) { - for (i = 0; i < hmux->nr_pads_dynamic; i++) { - struct omap_device_pad *pad = hmux->pads_dynamic[i]; - int val = -EINVAL; - - val = pad->idle; - omap_mux_write(pad->partition, val, - pad->mux->reg_offset); - } - - return; - } - - /* Runtime enabling of dynamic pads */ - if ((state == _HWMOD_STATE_ENABLED) && hmux->pads_dynamic - && hmux->enabled) { - for (i = 0; i < hmux->nr_pads_dynamic; i++) { - struct omap_device_pad *pad = hmux->pads_dynamic[i]; - int val = -EINVAL; - - val = pad->enable; - omap_mux_write(pad->partition, val, - pad->mux->reg_offset); - } - - return; - } - - /* Enabling or disabling of all pads */ - for (i = 0; i < hmux->nr_pads; i++) { - struct omap_device_pad *pad = &hmux->pads[i]; - int flags, val = -EINVAL; - - flags = pad->flags; - - switch (state) { - case _HWMOD_STATE_ENABLED: - val = pad->enable; - pr_debug("%s: Enabling %s %x\n", __func__, - pad->name, val); - break; - case _HWMOD_STATE_DISABLED: - /* Use safe mode unless OMAP_DEVICE_PAD_REMUX */ - if (flags & OMAP_DEVICE_PAD_REMUX) - val = pad->off; - else - val = OMAP_MUX_MODE7; - pr_debug("%s: Disabling %s %x\n", __func__, - pad->name, val); - break; - default: - /* Nothing to be done */ - break; - } - - if (val >= 0) { - omap_mux_write(pad->partition, val, - pad->mux->reg_offset); - pad->flags = flags; - } - } - - if (state == _HWMOD_STATE_ENABLED) - hmux->enabled = true; - else - hmux->enabled = false; -} - -#ifdef CONFIG_DEBUG_FS - -#define OMAP_MUX_MAX_NR_FLAGS 10 -#define OMAP_MUX_TEST_FLAG(val, mask) \ - if (((val) & (mask)) == (mask)) { \ - i++; \ - flags[i] = #mask; \ - } - -/* REVISIT: Add checking for non-optimal mux settings */ -static inline void omap_mux_decode(struct seq_file *s, u16 val) -{ - char *flags[OMAP_MUX_MAX_NR_FLAGS]; - char mode[sizeof("OMAP_MUX_MODE") + 1]; - int i = -1; - - sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7); - i++; - flags[i] = mode; - - OMAP_MUX_TEST_FLAG(val, OMAP_PIN_OFF_WAKEUPENABLE); - if (val & OMAP_OFF_EN) { - if (!(val & OMAP_OFFOUT_EN)) { - if (!(val & OMAP_OFF_PULL_UP)) { - OMAP_MUX_TEST_FLAG(val, - OMAP_PIN_OFF_INPUT_PULLDOWN); - } else { - OMAP_MUX_TEST_FLAG(val, - OMAP_PIN_OFF_INPUT_PULLUP); - } - } else { - if (!(val & OMAP_OFFOUT_VAL)) { - OMAP_MUX_TEST_FLAG(val, - OMAP_PIN_OFF_OUTPUT_LOW); - } else { - OMAP_MUX_TEST_FLAG(val, - OMAP_PIN_OFF_OUTPUT_HIGH); - } - } - } - - if (val & OMAP_INPUT_EN) { - if (val & OMAP_PULL_ENA) { - if (!(val & OMAP_PULL_UP)) { - OMAP_MUX_TEST_FLAG(val, - OMAP_PIN_INPUT_PULLDOWN); - } else { - OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT_PULLUP); - } - } else { - OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT); - } - } else { - i++; - flags[i] = "OMAP_PIN_OUTPUT"; - } - - do { - seq_printf(s, "%s", flags[i]); - if (i > 0) - seq_printf(s, " | "); - } while (i-- > 0); -} - -#define OMAP_MUX_DEFNAME_LEN 32 - -static int omap_mux_dbg_board_show(struct seq_file *s, void *unused) -{ - struct omap_mux_partition *partition = s->private; - struct omap_mux_entry *e; - u8 omap_gen = omap_rev() >> 28; - - list_for_each_entry(e, &partition->muxmodes, node) { - struct omap_mux *m = &e->mux; - char m0_def[OMAP_MUX_DEFNAME_LEN]; - char *m0_name = m->muxnames[0]; - u16 val; - int i, mode; - - if (!m0_name) - continue; - - /* REVISIT: Needs to be updated if mode0 names get longer */ - for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) { - if (m0_name[i] == '\0') { - m0_def[i] = m0_name[i]; - break; - } - m0_def[i] = toupper(m0_name[i]); - } - val = omap_mux_read(partition, m->reg_offset); - mode = val & OMAP_MUX_MODE7; - if (mode != 0) - seq_printf(s, "/* %s */\n", m->muxnames[mode]); - - /* - * XXX: Might be revisited to support differences across - * same OMAP generation. - */ - seq_printf(s, "OMAP%d_MUX(%s, ", omap_gen, m0_def); - omap_mux_decode(s, val); - seq_printf(s, "),\n"); - } - - return 0; -} - -static int omap_mux_dbg_board_open(struct inode *inode, struct file *file) -{ - return single_open(file, omap_mux_dbg_board_show, inode->i_private); -} - -static const struct file_operations omap_mux_dbg_board_fops = { - .open = omap_mux_dbg_board_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static struct omap_mux_partition *omap_mux_get_partition(struct omap_mux *mux) -{ - struct omap_mux_partition *partition; - - list_for_each_entry(partition, &mux_partitions, node) { - struct list_head *muxmodes = &partition->muxmodes; - struct omap_mux_entry *e; - - list_for_each_entry(e, muxmodes, node) { - struct omap_mux *m = &e->mux; - - if (m == mux) - return partition; - } - } - - return NULL; -} - -static int omap_mux_dbg_signal_show(struct seq_file *s, void *unused) -{ - struct omap_mux *m = s->private; - struct omap_mux_partition *partition; - const char *none = "NA"; - u16 val; - int mode; - - partition = omap_mux_get_partition(m); - if (!partition) - return 0; - - val = omap_mux_read(partition, m->reg_offset); - mode = val & OMAP_MUX_MODE7; - - seq_printf(s, "name: %s.%s (0x%08x/0x%03x = 0x%04x), b %s, t %s\n", - m->muxnames[0], m->muxnames[mode], - partition->phys + m->reg_offset, m->reg_offset, val, - m->balls[0] ? m->balls[0] : none, - m->balls[1] ? m->balls[1] : none); - seq_printf(s, "mode: "); - omap_mux_decode(s, val); - seq_printf(s, "\n"); - seq_printf(s, "signals: %s | %s | %s | %s | %s | %s | %s | %s\n", - m->muxnames[0] ? m->muxnames[0] : none, - m->muxnames[1] ? m->muxnames[1] : none, - m->muxnames[2] ? m->muxnames[2] : none, - m->muxnames[3] ? m->muxnames[3] : none, - m->muxnames[4] ? m->muxnames[4] : none, - m->muxnames[5] ? m->muxnames[5] : none, - m->muxnames[6] ? m->muxnames[6] : none, - m->muxnames[7] ? m->muxnames[7] : none); - - return 0; -} - -#define OMAP_MUX_MAX_ARG_CHAR 7 - -static ssize_t omap_mux_dbg_signal_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct seq_file *seqf; - struct omap_mux *m; - u16 val; - int ret; - struct omap_mux_partition *partition; - - if (count > OMAP_MUX_MAX_ARG_CHAR) - return -EINVAL; - - ret = kstrtou16_from_user(user_buf, count, 0x10, &val); - if (ret < 0) - return ret; - - seqf = file->private_data; - m = seqf->private; - - partition = omap_mux_get_partition(m); - if (!partition) - return -ENODEV; - - omap_mux_write(partition, val, m->reg_offset); - *ppos += count; - - return count; -} - -static int omap_mux_dbg_signal_open(struct inode *inode, struct file *file) -{ - return single_open(file, omap_mux_dbg_signal_show, inode->i_private); -} - -static const struct file_operations omap_mux_dbg_signal_fops = { - .open = omap_mux_dbg_signal_open, - .read = seq_read, - .write = omap_mux_dbg_signal_write, - .llseek = seq_lseek, - .release = single_release, -}; - -static struct dentry *mux_dbg_dir; - -static void __init omap_mux_dbg_create_entry( - struct omap_mux_partition *partition, - struct dentry *mux_dbg_dir) -{ - struct omap_mux_entry *e; - - list_for_each_entry(e, &partition->muxmodes, node) { - struct omap_mux *m = &e->mux; - - (void)debugfs_create_file(m->muxnames[0], S_IWUSR | S_IRUGO, - mux_dbg_dir, m, - &omap_mux_dbg_signal_fops); - } -} - -static void __init omap_mux_dbg_init(void) -{ - struct omap_mux_partition *partition; - static struct dentry *mux_dbg_board_dir; - - mux_dbg_dir = debugfs_create_dir("omap_mux", NULL); - if (!mux_dbg_dir) - return; - - mux_dbg_board_dir = debugfs_create_dir("board", mux_dbg_dir); - if (!mux_dbg_board_dir) - return; - - list_for_each_entry(partition, &mux_partitions, node) { - omap_mux_dbg_create_entry(partition, mux_dbg_dir); - (void)debugfs_create_file(partition->name, S_IRUGO, - mux_dbg_board_dir, partition, - &omap_mux_dbg_board_fops); - } -} - -#else -static inline void omap_mux_dbg_init(void) -{ -} -#endif /* CONFIG_DEBUG_FS */ - -static void __init omap_mux_free_names(struct omap_mux *m) -{ - int i; - - for (i = 0; i < OMAP_MUX_NR_MODES; i++) - kfree(m->muxnames[i]); - -#ifdef CONFIG_DEBUG_FS - for (i = 0; i < OMAP_MUX_NR_SIDES; i++) - kfree(m->balls[i]); -#endif - -} - -/* Free all data except for GPIO pins unless CONFIG_DEBUG_FS is set */ -int __init omap_mux_late_init(void) -{ - struct omap_mux_partition *partition; - int ret; - - list_for_each_entry(partition, &mux_partitions, node) { - struct omap_mux_entry *e, *tmp; - list_for_each_entry_safe(e, tmp, &partition->muxmodes, node) { - struct omap_mux *m = &e->mux; - u16 mode = omap_mux_read(partition, m->reg_offset); - - if (OMAP_MODE_GPIO(partition, mode)) - continue; - -#ifndef CONFIG_DEBUG_FS - mutex_lock(&muxmode_mutex); - list_del(&e->node); - mutex_unlock(&muxmode_mutex); - omap_mux_free_names(m); - kfree(m); -#endif - } - } - - omap_mux_dbg_init(); - - /* see pinctrl-single-omap for the wake-up interrupt handling */ - if (of_have_populated_dt()) - return 0; - - ret = request_irq(omap_prcm_event_to_irq("io"), - omap_hwmod_mux_handle_irq, IRQF_SHARED | IRQF_NO_SUSPEND, - "hwmod_io", omap_mux_late_init); - - if (ret) - pr_warn("mux: Failed to setup hwmod io irq %d\n", ret); - - return 0; -} - -static void __init omap_mux_package_fixup(struct omap_mux *p, - struct omap_mux *superset) -{ - while (p->reg_offset != OMAP_MUX_TERMINATOR) { - struct omap_mux *s = superset; - int found = 0; - - while (s->reg_offset != OMAP_MUX_TERMINATOR) { - if (s->reg_offset == p->reg_offset) { - *s = *p; - found++; - break; - } - s++; - } - if (!found) - pr_err("%s: Unknown entry offset 0x%x\n", __func__, - p->reg_offset); - p++; - } -} - -#ifdef CONFIG_DEBUG_FS - -static void __init omap_mux_package_init_balls(struct omap_ball *b, - struct omap_mux *superset) -{ - while (b->reg_offset != OMAP_MUX_TERMINATOR) { - struct omap_mux *s = superset; - int found = 0; - - while (s->reg_offset != OMAP_MUX_TERMINATOR) { - if (s->reg_offset == b->reg_offset) { - s->balls[0] = b->balls[0]; - s->balls[1] = b->balls[1]; - found++; - break; - } - s++; - } - if (!found) - pr_err("%s: Unknown ball offset 0x%x\n", __func__, - b->reg_offset); - b++; - } -} - -#else /* CONFIG_DEBUG_FS */ - -static inline void omap_mux_package_init_balls(struct omap_ball *b, - struct omap_mux *superset) -{ -} - -#endif /* CONFIG_DEBUG_FS */ - -static int __init omap_mux_setup(char *options) -{ - if (!options) - return 0; - - omap_mux_options = options; - - return 1; -} -__setup("omap_mux=", omap_mux_setup); - -/* - * Note that the omap_mux=some.signal1=0x1234,some.signal2=0x1234 - * cmdline options only override the bootloader values. - * During development, please enable CONFIG_DEBUG_FS, and use the - * signal specific entries under debugfs. - */ -static void __init omap_mux_set_cmdline_signals(void) -{ - char *options, *next_opt, *token; - - if (!omap_mux_options) - return; - - options = kstrdup(omap_mux_options, GFP_KERNEL); - if (!options) - return; - - next_opt = options; - - while ((token = strsep(&next_opt, ",")) != NULL) { - char *keyval, *name; - u16 val; - - keyval = token; - name = strsep(&keyval, "="); - if (name) { - int res; - - res = kstrtou16(keyval, 0x10, &val); - if (res < 0) - continue; - - omap_mux_init_signal(name, (u16)val); - } - } - - kfree(options); -} - -static int __init omap_mux_copy_names(struct omap_mux *src, - struct omap_mux *dst) -{ - int i; - - for (i = 0; i < OMAP_MUX_NR_MODES; i++) { - if (src->muxnames[i]) { - dst->muxnames[i] = kstrdup(src->muxnames[i], - GFP_KERNEL); - if (!dst->muxnames[i]) - goto free; - } - } - -#ifdef CONFIG_DEBUG_FS - for (i = 0; i < OMAP_MUX_NR_SIDES; i++) { - if (src->balls[i]) { - dst->balls[i] = kstrdup(src->balls[i], GFP_KERNEL); - if (!dst->balls[i]) - goto free; - } - } -#endif - - return 0; - -free: - omap_mux_free_names(dst); - return -ENOMEM; - -} - -#endif /* CONFIG_OMAP_MUX */ - -static struct omap_mux *omap_mux_get_by_gpio( - struct omap_mux_partition *partition, - int gpio) -{ - struct omap_mux_entry *e; - struct omap_mux *ret = NULL; - - list_for_each_entry(e, &partition->muxmodes, node) { - struct omap_mux *m = &e->mux; - if (m->gpio == gpio) { - ret = m; - break; - } - } - - return ret; -} - -/* Needed for dynamic muxing of GPIO pins for off-idle */ -u16 omap_mux_get_gpio(int gpio) -{ - struct omap_mux_partition *partition; - struct omap_mux *m = NULL; - - list_for_each_entry(partition, &mux_partitions, node) { - m = omap_mux_get_by_gpio(partition, gpio); - if (m) - return omap_mux_read(partition, m->reg_offset); - } - - if (!m || m->reg_offset == OMAP_MUX_TERMINATOR) - pr_err("%s: Could not get gpio%i\n", __func__, gpio); - - return OMAP_MUX_TERMINATOR; -} - -/* Needed for dynamic muxing of GPIO pins for off-idle */ -void omap_mux_set_gpio(u16 val, int gpio) -{ - struct omap_mux_partition *partition; - struct omap_mux *m = NULL; - - list_for_each_entry(partition, &mux_partitions, node) { - m = omap_mux_get_by_gpio(partition, gpio); - if (m) { - omap_mux_write(partition, val, m->reg_offset); - return; - } - } - - if (!m || m->reg_offset == OMAP_MUX_TERMINATOR) - pr_err("%s: Could not set gpio%i\n", __func__, gpio); -} - -static struct omap_mux * __init omap_mux_list_add( - struct omap_mux_partition *partition, - struct omap_mux *src) -{ - struct omap_mux_entry *entry; - struct omap_mux *m; - - entry = kzalloc(sizeof(struct omap_mux_entry), GFP_KERNEL); - if (!entry) - return NULL; - - m = &entry->mux; - entry->mux = *src; - -#ifdef CONFIG_OMAP_MUX - if (omap_mux_copy_names(src, m)) { - kfree(entry); - return NULL; - } -#endif - - mutex_lock(&muxmode_mutex); - list_add_tail(&entry->node, &partition->muxmodes); - mutex_unlock(&muxmode_mutex); - - return m; -} - -/* - * Note if CONFIG_OMAP_MUX is not selected, we will only initialize - * the GPIO to mux offset mapping that is needed for dynamic muxing - * of GPIO pins for off-idle. - */ -static void __init omap_mux_init_list(struct omap_mux_partition *partition, - struct omap_mux *superset) -{ - while (superset->reg_offset != OMAP_MUX_TERMINATOR) { - struct omap_mux *entry; - -#ifdef CONFIG_OMAP_MUX - if (!superset->muxnames[0]) { - superset++; - continue; - } -#else - /* Skip pins that are not muxed as GPIO by bootloader */ - if (!OMAP_MODE_GPIO(partition, omap_mux_read(partition, - superset->reg_offset))) { - superset++; - continue; - } -#endif - - entry = omap_mux_list_add(partition, superset); - if (!entry) { - pr_err("%s: Could not add entry\n", __func__); - return; - } - superset++; - } -} - -#ifdef CONFIG_OMAP_MUX - -static void omap_mux_init_package(struct omap_mux *superset, - struct omap_mux *package_subset, - struct omap_ball *package_balls) -{ - if (package_subset) - omap_mux_package_fixup(package_subset, superset); - if (package_balls) - omap_mux_package_init_balls(package_balls, superset); -} - -static void __init omap_mux_init_signals(struct omap_mux_partition *partition, - struct omap_board_mux *board_mux) -{ - omap_mux_set_cmdline_signals(); - omap_mux_write_array(partition, board_mux); -} - -#else - -static void omap_mux_init_package(struct omap_mux *superset, - struct omap_mux *package_subset, - struct omap_ball *package_balls) -{ -} - -static void __init omap_mux_init_signals(struct omap_mux_partition *partition, - struct omap_board_mux *board_mux) -{ -} - -#endif - -static u32 mux_partitions_cnt; - -int __init omap_mux_init(const char *name, u32 flags, - u32 mux_pbase, u32 mux_size, - struct omap_mux *superset, - struct omap_mux *package_subset, - struct omap_board_mux *board_mux, - struct omap_ball *package_balls) -{ - struct omap_mux_partition *partition; - - partition = kzalloc(sizeof(struct omap_mux_partition), GFP_KERNEL); - if (!partition) - return -ENOMEM; - - partition->name = name; - partition->flags = flags; - partition->gpio = flags & OMAP_MUX_MODE7; - partition->size = mux_size; - partition->phys = mux_pbase; - partition->base = ioremap(mux_pbase, mux_size); - if (!partition->base) { - pr_err("%s: Could not ioremap mux partition at 0x%08x\n", - __func__, partition->phys); - kfree(partition); - return -ENODEV; - } - - INIT_LIST_HEAD(&partition->muxmodes); - - list_add_tail(&partition->node, &mux_partitions); - mux_partitions_cnt++; - pr_info("%s: Add partition: #%d: %s, flags: %x\n", __func__, - mux_partitions_cnt, partition->name, partition->flags); - - omap_mux_init_package(superset, package_subset, package_balls); - omap_mux_init_list(partition, superset); - omap_mux_init_signals(partition, board_mux); - - return 0; -} - diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h deleted file mode 100644 index d121fb6df4e6..000000000000 --- a/arch/arm/mach-omap2/mux.h +++ /dev/null @@ -1,352 +0,0 @@ -/* - * Copyright (C) 2009 Nokia - * Copyright (C) 2009-2010 Texas Instruments - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include "mux34xx.h" - -#define OMAP_MUX_TERMINATOR 0xffff - -/* 34xx mux mode options for each pin. See TRM for options */ -#define OMAP_MUX_MODE0 0 -#define OMAP_MUX_MODE1 1 -#define OMAP_MUX_MODE2 2 -#define OMAP_MUX_MODE3 3 -#define OMAP_MUX_MODE4 4 -#define OMAP_MUX_MODE5 5 -#define OMAP_MUX_MODE6 6 -#define OMAP_MUX_MODE7 7 - -/* 24xx/34xx mux bit defines */ -#define OMAP_PULL_ENA (1 << 3) -#define OMAP_PULL_UP (1 << 4) -#define OMAP_ALTELECTRICALSEL (1 << 5) - -/* omap3/4/5 specific mux bit defines */ -#define OMAP_INPUT_EN (1 << 8) -#define OMAP_OFF_EN (1 << 9) -#define OMAP_OFFOUT_EN (1 << 10) -#define OMAP_OFFOUT_VAL (1 << 11) -#define OMAP_OFF_PULL_EN (1 << 12) -#define OMAP_OFF_PULL_UP (1 << 13) -#define OMAP_WAKEUP_EN (1 << 14) -#define OMAP_WAKEUP_EVENT (1 << 15) - -/* Active pin states */ -#define OMAP_PIN_OUTPUT 0 -#define OMAP_PIN_INPUT OMAP_INPUT_EN -#define OMAP_PIN_INPUT_PULLUP (OMAP_PULL_ENA | OMAP_INPUT_EN \ - | OMAP_PULL_UP) -#define OMAP_PIN_INPUT_PULLDOWN (OMAP_PULL_ENA | OMAP_INPUT_EN) - -/* Off mode states */ -#define OMAP_PIN_OFF_NONE 0 -#define OMAP_PIN_OFF_OUTPUT_HIGH (OMAP_OFF_EN | OMAP_OFFOUT_EN \ - | OMAP_OFFOUT_VAL) -#define OMAP_PIN_OFF_OUTPUT_LOW (OMAP_OFF_EN | OMAP_OFFOUT_EN) -#define OMAP_PIN_OFF_INPUT_PULLUP (OMAP_OFF_EN | OMAP_OFF_PULL_EN \ - | OMAP_OFF_PULL_UP) -#define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN) -#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN - -#define OMAP_MODE_GPIO(partition, x) (((x) & OMAP_MUX_MODE7) == \ - partition->gpio) -#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0) - -/* Flags for omapX_mux_init */ -#define OMAP_PACKAGE_MASK 0xffff -#define OMAP_PACKAGE_CBP 6 /* 515-pin 0.40 0.50 */ -#define OMAP_PACKAGE_CUS 5 /* 423-pin 0.65 */ -#define OMAP_PACKAGE_CBB 4 /* 515-pin 0.40 0.50 */ -#define OMAP_PACKAGE_CBC 3 /* 515-pin 0.50 0.65 */ - -#define OMAP_MUX_NR_MODES 8 /* Available modes */ -#define OMAP_MUX_NR_SIDES 2 /* Bottom & top */ - -/* - * omap_mux_init flags definition: - * - * OMAP_GPIO_MUX_MODE, bits 0-2: gpio muxing mode, same like pad control - * register which includes values from 0-7. - * OMAP_MUX_REG_8BIT: Ensure that access to padconf is done in 8 bits. - * The default value is 16 bits. - */ -#define OMAP_MUX_GPIO_IN_MODE0 OMAP_MUX_MODE0 -#define OMAP_MUX_GPIO_IN_MODE1 OMAP_MUX_MODE1 -#define OMAP_MUX_GPIO_IN_MODE2 OMAP_MUX_MODE2 -#define OMAP_MUX_GPIO_IN_MODE3 OMAP_MUX_MODE3 -#define OMAP_MUX_GPIO_IN_MODE4 OMAP_MUX_MODE4 -#define OMAP_MUX_GPIO_IN_MODE5 OMAP_MUX_MODE5 -#define OMAP_MUX_GPIO_IN_MODE6 OMAP_MUX_MODE6 -#define OMAP_MUX_GPIO_IN_MODE7 OMAP_MUX_MODE7 -#define OMAP_MUX_REG_8BIT (1 << 3) - -/** - * struct omap_board_data - board specific device data - * @id: instance id - * @flags: additional flags for platform init code - * @pads: array of device specific pads - * @pads_cnt: ARRAY_SIZE() of pads - */ -struct omap_board_data { - int id; - u32 flags; - struct omap_device_pad *pads; - int pads_cnt; -}; - -/** - * struct mux_partition - contain partition related information - * @name: name of the current partition - * @flags: flags specific to this partition - * @gpio: gpio mux mode - * @phys: physical address - * @size: partition size - * @base: virtual address after ioremap - * @muxmodes: list of nodes that belong to a partition - * @node: list node for the partitions linked list - */ -struct omap_mux_partition { - const char *name; - u32 flags; - u32 gpio; - u32 phys; - u32 size; - void __iomem *base; - struct list_head muxmodes; - struct list_head node; -}; - -/** - * struct omap_mux - data for omap mux register offset and it's value - * @reg_offset: mux register offset from the mux base - * @gpio: GPIO number - * @muxnames: available signal modes for a ball - * @balls: available balls on the package - */ -struct omap_mux { - u16 reg_offset; - u16 gpio; -#ifdef CONFIG_OMAP_MUX - char *muxnames[OMAP_MUX_NR_MODES]; -#ifdef CONFIG_DEBUG_FS - char *balls[OMAP_MUX_NR_SIDES]; -#endif -#endif -}; - -/** - * struct omap_ball - data for balls on omap package - * @reg_offset: mux register offset from the mux base - * @balls: available balls on the package - */ -struct omap_ball { - u16 reg_offset; - char *balls[OMAP_MUX_NR_SIDES]; -}; - -/** - * struct omap_board_mux - data for initializing mux registers - * @reg_offset: mux register offset from the mux base - * @mux_value: desired mux value to set - */ -struct omap_board_mux { - u16 reg_offset; - u16 value; -}; - -#define OMAP_DEVICE_PAD_REMUX BIT(1) /* Dynamically remux a pad, - needs enable, idle and off - values */ -#define OMAP_DEVICE_PAD_WAKEUP BIT(0) /* Pad is wake-up capable */ - -/** - * struct omap_device_pad - device specific pad configuration - * @name: signal name - * @flags: pad specific runtime flags - * @enable: runtime value for a pad - * @idle: idle value for a pad - * @off: off value for a pad, defaults to safe mode - * @partition: mux partition - * @mux: mux register - */ -struct omap_device_pad { - char *name; - u8 flags; - u16 enable; - u16 idle; - u16 off; - struct omap_mux_partition *partition; - struct omap_mux *mux; -}; - -struct omap_hwmod_mux_info; - -#define OMAP_MUX_STATIC(signal, mode) \ -{ \ - .name = (signal), \ - .enable = (mode), \ -} - -#if defined(CONFIG_OMAP_MUX) - -/** - * omap_mux_init_gpio - initialize a signal based on the GPIO number - * @gpio: GPIO number - * @val: Options for the mux register value - */ -int omap_mux_init_gpio(int gpio, int val); - -/** - * omap_mux_init_signal - initialize a signal based on the signal name - * @muxname: Mux name in mode0_name.signal_name format - * @val: Options for the mux register value - */ -int omap_mux_init_signal(const char *muxname, int val); - -/** - * omap_hwmod_mux_init - initialize hwmod specific mux data - * @bpads: Board specific device signal names - * @nr_pads: Number of signal names for the device - */ -extern struct omap_hwmod_mux_info * -omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads); - -/** - * omap_hwmod_mux - omap hwmod specific pin muxing - * @hmux: Pads for a hwmod - * @state: Desired _HWMOD_STATE - * - * Called only from omap_hwmod.c, do not use. - */ -void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state); - -int omap_mux_get_by_name(const char *muxname, - struct omap_mux_partition **found_partition, - struct omap_mux **found_mux); -#else - -static inline int omap_mux_get_by_name(const char *muxname, - struct omap_mux_partition **found_partition, - struct omap_mux **found_mux) -{ - return 0; -} - -static inline int omap_mux_init_gpio(int gpio, int val) -{ - return 0; -} -static inline int omap_mux_init_signal(char *muxname, int val) -{ - return 0; -} - -static inline struct omap_hwmod_mux_info * -omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads) -{ - return NULL; -} - -static inline void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state) -{ -} - -static struct omap_board_mux *board_mux __maybe_unused; - -#endif - -/** - * omap_mux_get_gpio() - get mux register value based on GPIO number - * @gpio: GPIO number - * - */ -u16 omap_mux_get_gpio(int gpio); - -/** - * omap_mux_set_gpio() - set mux register value based on GPIO number - * @val: New mux register value - * @gpio: GPIO number - * - */ -void omap_mux_set_gpio(u16 val, int gpio); - -/** - * omap_mux_get() - get a mux partition by name - * @name: Name of the mux partition - * - */ -struct omap_mux_partition *omap_mux_get(const char *name); - -/** - * omap_mux_read() - read mux register - * @partition: Mux partition - * @mux_offset: Offset of the mux register - * - */ -u16 omap_mux_read(struct omap_mux_partition *p, u16 mux_offset); - -/** - * omap_mux_write() - write mux register - * @partition: Mux partition - * @val: New mux register value - * @mux_offset: Offset of the mux register - * - * This should be only needed for dynamic remuxing of non-gpio signals. - */ -void omap_mux_write(struct omap_mux_partition *p, u16 val, u16 mux_offset); - -/** - * omap_mux_write_array() - write an array of mux registers - * @partition: Mux partition - * @board_mux: Array of mux registers terminated by MAP_MUX_TERMINATOR - * - * This should be only needed for dynamic remuxing of non-gpio signals. - */ -void omap_mux_write_array(struct omap_mux_partition *p, - struct omap_board_mux *board_mux); - -/** - * omap2420_mux_init() - initialize mux system with board specific set - * @board_mux: Board specific mux table - * @flags: OMAP package type used for the board - */ -int omap2420_mux_init(struct omap_board_mux *board_mux, int flags); - -/** - * omap2430_mux_init() - initialize mux system with board specific set - * @board_mux: Board specific mux table - * @flags: OMAP package type used for the board - */ -int omap2430_mux_init(struct omap_board_mux *board_mux, int flags); - -/** - * omap3_mux_init() - initialize mux system with board specific set - * @board_mux: Board specific mux table - * @flags: OMAP package type used for the board - */ -int omap3_mux_init(struct omap_board_mux *board_mux, int flags); - -/** - * omap4_mux_init() - initialize mux system with board specific set - * @board_subset: Board specific mux table - * @board_wkup_subset: Board specific mux table for wakeup instance - * @flags: OMAP package type used for the board - */ -int omap4_mux_init(struct omap_board_mux *board_subset, - struct omap_board_mux *board_wkup_subset, int flags); - -/** - * omap_mux_init - private mux init function, do not call - */ -int omap_mux_init(const char *name, u32 flags, - u32 mux_pbase, u32 mux_size, - struct omap_mux *superset, - struct omap_mux *package_subset, - struct omap_board_mux *board_mux, - struct omap_ball *package_balls); - diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c deleted file mode 100644 index 393e687f99e2..000000000000 --- a/arch/arm/mach-omap2/mux34xx.c +++ /dev/null @@ -1,2061 +0,0 @@ -/* - * Copyright (C) 2009 Nokia - * Copyright (C) 2009 Texas Instruments - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/init.h> - -#include "mux.h" - -#ifdef CONFIG_OMAP_MUX - -#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \ -{ \ - .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \ - .gpio = (g), \ - .muxnames = { m0, m1, m2, m3, m4, m5, m6, m7 }, \ -} - -#else - -#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \ -{ \ - .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \ - .gpio = (g), \ -} - -#endif - -#define _OMAP3_BALLENTRY(M0, bb, bt) \ -{ \ - .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \ - .balls = { bb, bt }, \ -} - -/* - * Superset of all mux modes for omap3 - */ -static struct omap_mux __initdata omap3_muxmodes[] = { - _OMAP3_MUXENTRY(CAM_D0, 99, - "cam_d0", NULL, NULL, NULL, - "gpio_99", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D1, 100, - "cam_d1", NULL, NULL, NULL, - "gpio_100", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D10, 109, - "cam_d10", NULL, NULL, NULL, - "gpio_109", "hw_dbg8", NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D11, 110, - "cam_d11", NULL, NULL, NULL, - "gpio_110", "hw_dbg9", NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D2, 101, - "cam_d2", NULL, NULL, NULL, - "gpio_101", "hw_dbg4", NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D3, 102, - "cam_d3", NULL, NULL, NULL, - "gpio_102", "hw_dbg5", NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D4, 103, - "cam_d4", NULL, NULL, NULL, - "gpio_103", "hw_dbg6", NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D5, 104, - "cam_d5", NULL, NULL, NULL, - "gpio_104", "hw_dbg7", NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D6, 105, - "cam_d6", NULL, NULL, NULL, - "gpio_105", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D7, 106, - "cam_d7", NULL, NULL, NULL, - "gpio_106", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D8, 107, - "cam_d8", NULL, NULL, NULL, - "gpio_107", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D9, 108, - "cam_d9", NULL, NULL, NULL, - "gpio_108", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_FLD, 98, - "cam_fld", NULL, "cam_global_reset", NULL, - "gpio_98", "hw_dbg3", NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_HS, 94, - "cam_hs", NULL, NULL, NULL, - "gpio_94", "hw_dbg0", NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_PCLK, 97, - "cam_pclk", NULL, NULL, NULL, - "gpio_97", "hw_dbg2", NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_STROBE, 126, - "cam_strobe", NULL, NULL, NULL, - "gpio_126", "hw_dbg11", NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_VS, 95, - "cam_vs", NULL, NULL, NULL, - "gpio_95", "hw_dbg1", NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_WEN, 167, - "cam_wen", NULL, "cam_shutter", NULL, - "gpio_167", "hw_dbg10", NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_XCLKA, 96, - "cam_xclka", NULL, NULL, NULL, - "gpio_96", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_XCLKB, 111, - "cam_xclkb", NULL, NULL, NULL, - "gpio_111", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CSI2_DX0, 112, - "csi2_dx0", NULL, NULL, NULL, - "gpio_112", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CSI2_DX1, 114, - "csi2_dx1", NULL, NULL, NULL, - "gpio_114", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CSI2_DY0, 113, - "csi2_dy0", NULL, NULL, NULL, - "gpio_113", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CSI2_DY1, 115, - "csi2_dy1", NULL, NULL, NULL, - "gpio_115", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_ACBIAS, 69, - "dss_acbias", NULL, NULL, NULL, - "gpio_69", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA0, 70, - "dss_data0", NULL, "uart1_cts", NULL, - "gpio_70", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA1, 71, - "dss_data1", NULL, "uart1_rts", NULL, - "gpio_71", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA10, 80, - "dss_data10", NULL, NULL, NULL, - "gpio_80", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA11, 81, - "dss_data11", NULL, NULL, NULL, - "gpio_81", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA12, 82, - "dss_data12", NULL, NULL, NULL, - "gpio_82", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA13, 83, - "dss_data13", NULL, NULL, NULL, - "gpio_83", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA14, 84, - "dss_data14", NULL, NULL, NULL, - "gpio_84", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA15, 85, - "dss_data15", NULL, NULL, NULL, - "gpio_85", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA16, 86, - "dss_data16", NULL, NULL, NULL, - "gpio_86", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA17, 87, - "dss_data17", NULL, NULL, NULL, - "gpio_87", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA18, 88, - "dss_data18", NULL, "mcspi3_clk", "dss_data0", - "gpio_88", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA19, 89, - "dss_data19", NULL, "mcspi3_simo", "dss_data1", - "gpio_89", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA20, 90, - "dss_data20", NULL, "mcspi3_somi", "dss_data2", - "gpio_90", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA21, 91, - "dss_data21", NULL, "mcspi3_cs0", "dss_data3", - "gpio_91", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA22, 92, - "dss_data22", NULL, "mcspi3_cs1", "dss_data4", - "gpio_92", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA23, 93, - "dss_data23", NULL, NULL, "dss_data5", - "gpio_93", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA2, 72, - "dss_data2", NULL, NULL, NULL, - "gpio_72", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA3, 73, - "dss_data3", NULL, NULL, NULL, - "gpio_73", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA4, 74, - "dss_data4", NULL, "uart3_rx_irrx", NULL, - "gpio_74", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA5, 75, - "dss_data5", NULL, "uart3_tx_irtx", NULL, - "gpio_75", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA6, 76, - "dss_data6", NULL, "uart1_tx", NULL, - "gpio_76", "hw_dbg14", NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA7, 77, - "dss_data7", NULL, "uart1_rx", NULL, - "gpio_77", "hw_dbg15", NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA8, 78, - "dss_data8", NULL, NULL, NULL, - "gpio_78", "hw_dbg16", NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA9, 79, - "dss_data9", NULL, NULL, NULL, - "gpio_79", "hw_dbg17", NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_HSYNC, 67, - "dss_hsync", NULL, NULL, NULL, - "gpio_67", "hw_dbg13", NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_PCLK, 66, - "dss_pclk", NULL, NULL, NULL, - "gpio_66", "hw_dbg12", NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_VSYNC, 68, - "dss_vsync", NULL, NULL, NULL, - "gpio_68", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(ETK_CLK, 12, - "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp", - "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", "hw_dbg0"), - _OMAP3_MUXENTRY(ETK_CTL, 13, - "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk", - "gpio_13", NULL, "hsusb1_tll_clk", "hw_dbg1"), - _OMAP3_MUXENTRY(ETK_D0, 14, - "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0", - "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", "hw_dbg2"), - _OMAP3_MUXENTRY(ETK_D1, 15, - "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1", - "gpio_15", "mm1_txse0", "hsusb1_tll_data1", "hw_dbg3"), - _OMAP3_MUXENTRY(ETK_D10, 24, - "etk_d10", NULL, "uart1_rx", "hsusb2_clk", - "gpio_24", NULL, "hsusb2_tll_clk", "hw_dbg12"), - _OMAP3_MUXENTRY(ETK_D11, 25, - "etk_d11", NULL, NULL, "hsusb2_stp", - "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", "hw_dbg13"), - _OMAP3_MUXENTRY(ETK_D12, 26, - "etk_d12", NULL, NULL, "hsusb2_dir", - "gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"), - _OMAP3_MUXENTRY(ETK_D13, 27, - "etk_d13", NULL, NULL, "hsusb2_nxt", - "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", "hw_dbg15"), - _OMAP3_MUXENTRY(ETK_D14, 28, - "etk_d14", NULL, NULL, "hsusb2_data0", - "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", "hw_dbg16"), - _OMAP3_MUXENTRY(ETK_D15, 29, - "etk_d15", NULL, NULL, "hsusb2_data1", - "gpio_29", "mm2_txse0", "hsusb2_tll_data1", "hw_dbg17"), - _OMAP3_MUXENTRY(ETK_D2, 16, - "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2", - "gpio_16", "mm1_txdat", "hsusb1_tll_data2", "hw_dbg4"), - _OMAP3_MUXENTRY(ETK_D3, 17, - "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7", - "gpio_17", NULL, "hsusb1_tll_data7", "hw_dbg5"), - _OMAP3_MUXENTRY(ETK_D4, 18, - "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4", - "gpio_18", NULL, "hsusb1_tll_data4", "hw_dbg6"), - _OMAP3_MUXENTRY(ETK_D5, 19, - "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5", - "gpio_19", NULL, "hsusb1_tll_data5", "hw_dbg7"), - _OMAP3_MUXENTRY(ETK_D6, 20, - "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6", - "gpio_20", NULL, "hsusb1_tll_data6", "hw_dbg8"), - _OMAP3_MUXENTRY(ETK_D7, 21, - "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3", - "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", "hw_dbg9"), - _OMAP3_MUXENTRY(ETK_D8, 22, - "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir", - "gpio_22", NULL, "hsusb1_tll_dir", "hw_dbg10"), - _OMAP3_MUXENTRY(ETK_D9, 23, - "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt", - "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", "hw_dbg11"), - _OMAP3_MUXENTRY(GPMC_A1, 34, - "gpmc_a1", NULL, NULL, NULL, - "gpio_34", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_A10, 43, - "gpmc_a10", "sys_ndmareq3", NULL, NULL, - "gpio_43", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_A2, 35, - "gpmc_a2", NULL, NULL, NULL, - "gpio_35", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_A3, 36, - "gpmc_a3", NULL, NULL, NULL, - "gpio_36", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_A4, 37, - "gpmc_a4", NULL, NULL, NULL, - "gpio_37", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_A5, 38, - "gpmc_a5", NULL, NULL, NULL, - "gpio_38", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_A6, 39, - "gpmc_a6", NULL, NULL, NULL, - "gpio_39", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_A7, 40, - "gpmc_a7", NULL, NULL, NULL, - "gpio_40", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_A8, 41, - "gpmc_a8", NULL, NULL, NULL, - "gpio_41", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_A9, 42, - "gpmc_a9", "sys_ndmareq2", NULL, NULL, - "gpio_42", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_CLK, 59, - "gpmc_clk", NULL, NULL, NULL, - "gpio_59", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_D10, 46, - "gpmc_d10", NULL, NULL, NULL, - "gpio_46", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_D11, 47, - "gpmc_d11", NULL, NULL, NULL, - "gpio_47", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_D12, 48, - "gpmc_d12", NULL, NULL, NULL, - "gpio_48", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_D13, 49, - "gpmc_d13", NULL, NULL, NULL, - "gpio_49", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_D14, 50, - "gpmc_d14", NULL, NULL, NULL, - "gpio_50", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_D15, 51, - "gpmc_d15", NULL, NULL, NULL, - "gpio_51", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_D8, 44, - "gpmc_d8", NULL, NULL, NULL, - "gpio_44", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_D9, 45, - "gpmc_d9", NULL, NULL, NULL, - "gpio_45", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_NBE0_CLE, 60, - "gpmc_nbe0_cle", NULL, NULL, NULL, - "gpio_60", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_NBE1, 61, - "gpmc_nbe1", NULL, NULL, NULL, - "gpio_61", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_NCS1, 52, - "gpmc_ncs1", NULL, NULL, NULL, - "gpio_52", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_NCS2, 53, - "gpmc_ncs2", NULL, NULL, NULL, - "gpio_53", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_NCS3, 54, - "gpmc_ncs3", "sys_ndmareq0", NULL, NULL, - "gpio_54", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_NCS4, 55, - "gpmc_ncs4", "sys_ndmareq1", "mcbsp4_clkx", "gpt9_pwm_evt", - "gpio_55", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_NCS5, 56, - "gpmc_ncs5", "sys_ndmareq2", "mcbsp4_dr", "gpt10_pwm_evt", - "gpio_56", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_NCS6, 57, - "gpmc_ncs6", "sys_ndmareq3", "mcbsp4_dx", "gpt11_pwm_evt", - "gpio_57", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_NCS7, 58, - "gpmc_ncs7", "gpmc_io_dir", "mcbsp4_fsx", "gpt8_pwm_evt", - "gpio_58", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_NWP, 62, - "gpmc_nwp", NULL, NULL, NULL, - "gpio_62", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_WAIT1, 63, - "gpmc_wait1", NULL, NULL, NULL, - "gpio_63", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_WAIT2, 64, - "gpmc_wait2", NULL, NULL, NULL, - "gpio_64", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_WAIT3, 65, - "gpmc_wait3", "sys_ndmareq1", NULL, NULL, - "gpio_65", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(HDQ_SIO, 170, - "hdq_sio", "sys_altclk", "i2c2_sccbe", "i2c3_sccbe", - "gpio_170", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(HSUSB0_CLK, 120, - "hsusb0_clk", NULL, NULL, NULL, - "gpio_120", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(HSUSB0_DATA0, 125, - "hsusb0_data0", NULL, "uart3_tx_irtx", NULL, - "gpio_125", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(HSUSB0_DATA1, 130, - "hsusb0_data1", NULL, "uart3_rx_irrx", NULL, - "gpio_130", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(HSUSB0_DATA2, 131, - "hsusb0_data2", NULL, "uart3_rts_sd", NULL, - "gpio_131", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(HSUSB0_DATA3, 169, - "hsusb0_data3", NULL, "uart3_cts_rctx", NULL, - "gpio_169", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(HSUSB0_DATA4, 188, - "hsusb0_data4", NULL, NULL, NULL, - "gpio_188", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(HSUSB0_DATA5, 189, - "hsusb0_data5", NULL, NULL, NULL, - "gpio_189", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(HSUSB0_DATA6, 190, - "hsusb0_data6", NULL, NULL, NULL, - "gpio_190", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(HSUSB0_DATA7, 191, - "hsusb0_data7", NULL, NULL, NULL, - "gpio_191", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(HSUSB0_DIR, 122, - "hsusb0_dir", NULL, NULL, NULL, - "gpio_122", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(HSUSB0_NXT, 124, - "hsusb0_nxt", NULL, NULL, NULL, - "gpio_124", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(HSUSB0_STP, 121, - "hsusb0_stp", NULL, NULL, NULL, - "gpio_121", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(I2C2_SCL, 168, - "i2c2_scl", NULL, NULL, NULL, - "gpio_168", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(I2C2_SDA, 183, - "i2c2_sda", NULL, NULL, NULL, - "gpio_183", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(I2C3_SCL, 184, - "i2c3_scl", NULL, NULL, NULL, - "gpio_184", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(I2C3_SDA, 185, - "i2c3_sda", NULL, NULL, NULL, - "gpio_185", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(I2C4_SCL, 0, - "i2c4_scl", "sys_nvmode1", NULL, NULL, - NULL, NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(I2C4_SDA, 0, - "i2c4_sda", "sys_nvmode2", NULL, NULL, - NULL, NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(JTAG_EMU0, 11, - "jtag_emu0", NULL, NULL, NULL, - "gpio_11", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(JTAG_EMU1, 31, - "jtag_emu1", NULL, NULL, NULL, - "gpio_31", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP1_CLKR, 156, - "mcbsp1_clkr", "mcspi4_clk", NULL, NULL, - "gpio_156", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP1_CLKX, 162, - "mcbsp1_clkx", NULL, "mcbsp3_clkx", NULL, - "gpio_162", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP1_DR, 159, - "mcbsp1_dr", "mcspi4_somi", "mcbsp3_dr", NULL, - "gpio_159", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP1_DX, 158, - "mcbsp1_dx", "mcspi4_simo", "mcbsp3_dx", NULL, - "gpio_158", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP1_FSR, 157, - "mcbsp1_fsr", NULL, "cam_global_reset", NULL, - "gpio_157", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP1_FSX, 161, - "mcbsp1_fsx", "mcspi4_cs0", "mcbsp3_fsx", NULL, - "gpio_161", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP2_CLKX, 117, - "mcbsp2_clkx", NULL, NULL, NULL, - "gpio_117", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP2_DR, 118, - "mcbsp2_dr", NULL, NULL, NULL, - "gpio_118", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP2_DX, 119, - "mcbsp2_dx", NULL, NULL, NULL, - "gpio_119", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP2_FSX, 116, - "mcbsp2_fsx", NULL, NULL, NULL, - "gpio_116", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP3_CLKX, 142, - "mcbsp3_clkx", "uart2_tx", NULL, NULL, - "gpio_142", "hsusb3_tll_data6", NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP3_DR, 141, - "mcbsp3_dr", "uart2_rts", NULL, NULL, - "gpio_141", "hsusb3_tll_data5", NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP3_DX, 140, - "mcbsp3_dx", "uart2_cts", NULL, NULL, - "gpio_140", "hsusb3_tll_data4", NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP3_FSX, 143, - "mcbsp3_fsx", "uart2_rx", NULL, NULL, - "gpio_143", "hsusb3_tll_data7", NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP4_CLKX, 152, - "mcbsp4_clkx", NULL, NULL, NULL, - "gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"), - _OMAP3_MUXENTRY(MCBSP4_DR, 153, - "mcbsp4_dr", NULL, NULL, NULL, - "gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"), - _OMAP3_MUXENTRY(MCBSP4_DX, 154, - "mcbsp4_dx", NULL, NULL, NULL, - "gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"), - _OMAP3_MUXENTRY(MCBSP4_FSX, 155, - "mcbsp4_fsx", NULL, NULL, NULL, - "gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"), - _OMAP3_MUXENTRY(MCBSP_CLKS, 160, - "mcbsp_clks", NULL, "cam_shutter", NULL, - "gpio_160", "uart1_cts", NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCSPI1_CLK, 171, - "mcspi1_clk", "sdmmc2_dat4", NULL, NULL, - "gpio_171", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCSPI1_CS0, 174, - "mcspi1_cs0", "sdmmc2_dat7", NULL, NULL, - "gpio_174", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCSPI1_CS1, 175, - "mcspi1_cs1", NULL, NULL, "sdmmc3_cmd", - "gpio_175", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCSPI1_CS2, 176, - "mcspi1_cs2", NULL, NULL, "sdmmc3_clk", - "gpio_176", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCSPI1_CS3, 177, - "mcspi1_cs3", NULL, "hsusb2_tll_data2", "hsusb2_data2", - "gpio_177", "mm2_txdat", NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCSPI1_SIMO, 172, - "mcspi1_simo", "sdmmc2_dat5", NULL, NULL, - "gpio_172", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCSPI1_SOMI, 173, - "mcspi1_somi", "sdmmc2_dat6", NULL, NULL, - "gpio_173", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCSPI2_CLK, 178, - "mcspi2_clk", NULL, "hsusb2_tll_data7", "hsusb2_data7", - "gpio_178", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCSPI2_CS0, 181, - "mcspi2_cs0", "gpt11_pwm_evt", - "hsusb2_tll_data6", "hsusb2_data6", - "gpio_181", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCSPI2_CS1, 182, - "mcspi2_cs1", "gpt8_pwm_evt", - "hsusb2_tll_data3", "hsusb2_data3", - "gpio_182", "mm2_txen_n", NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCSPI2_SIMO, 179, - "mcspi2_simo", "gpt9_pwm_evt", - "hsusb2_tll_data4", "hsusb2_data4", - "gpio_179", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCSPI2_SOMI, 180, - "mcspi2_somi", "gpt10_pwm_evt", - "hsusb2_tll_data5", "hsusb2_data5", - "gpio_180", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC1_CLK, 120, - "sdmmc1_clk", NULL, NULL, NULL, - "gpio_120", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC1_CMD, 121, - "sdmmc1_cmd", NULL, NULL, NULL, - "gpio_121", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC1_DAT0, 122, - "sdmmc1_dat0", NULL, NULL, NULL, - "gpio_122", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC1_DAT1, 123, - "sdmmc1_dat1", NULL, NULL, NULL, - "gpio_123", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC1_DAT2, 124, - "sdmmc1_dat2", NULL, NULL, NULL, - "gpio_124", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC1_DAT3, 125, - "sdmmc1_dat3", NULL, NULL, NULL, - "gpio_125", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC1_DAT4, 126, - "sdmmc1_dat4", NULL, "sim_io", NULL, - "gpio_126", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC1_DAT5, 127, - "sdmmc1_dat5", NULL, "sim_clk", NULL, - "gpio_127", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC1_DAT6, 128, - "sdmmc1_dat6", NULL, "sim_pwrctrl", NULL, - "gpio_128", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC1_DAT7, 129, - "sdmmc1_dat7", NULL, "sim_rst", NULL, - "gpio_129", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC2_CLK, 130, - "sdmmc2_clk", "mcspi3_clk", NULL, NULL, - "gpio_130", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC2_CMD, 131, - "sdmmc2_cmd", "mcspi3_simo", NULL, NULL, - "gpio_131", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC2_DAT0, 132, - "sdmmc2_dat0", "mcspi3_somi", NULL, NULL, - "gpio_132", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC2_DAT1, 133, - "sdmmc2_dat1", NULL, NULL, NULL, - "gpio_133", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC2_DAT2, 134, - "sdmmc2_dat2", "mcspi3_cs1", NULL, NULL, - "gpio_134", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC2_DAT3, 135, - "sdmmc2_dat3", "mcspi3_cs0", NULL, NULL, - "gpio_135", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC2_DAT4, 136, - "sdmmc2_dat4", "sdmmc2_dir_dat0", NULL, "sdmmc3_dat0", - "gpio_136", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC2_DAT5, 137, - "sdmmc2_dat5", "sdmmc2_dir_dat1", - "cam_global_reset", "sdmmc3_dat1", - "gpio_137", "hsusb3_tll_stp", "mm3_rxdp", "safe_mode"), - _OMAP3_MUXENTRY(SDMMC2_DAT6, 138, - "sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2", - "gpio_138", "hsusb3_tll_dir", NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC2_DAT7, 139, - "sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3", - "gpio_139", "hsusb3_tll_nxt", "mm3_rxdm", "safe_mode"), - _OMAP3_MUXENTRY(SDRC_CKE0, 0, - "sdrc_cke0", NULL, NULL, NULL, - NULL, NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDRC_CKE1, 0, - "sdrc_cke1", NULL, NULL, NULL, - NULL, NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SYS_BOOT0, 2, - "sys_boot0", NULL, NULL, NULL, - "gpio_2", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SYS_BOOT1, 3, - "sys_boot1", NULL, NULL, NULL, - "gpio_3", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SYS_BOOT2, 4, - "sys_boot2", NULL, NULL, NULL, - "gpio_4", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SYS_BOOT3, 5, - "sys_boot3", NULL, NULL, NULL, - "gpio_5", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SYS_BOOT4, 6, - "sys_boot4", "sdmmc2_dir_dat2", NULL, NULL, - "gpio_6", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SYS_BOOT5, 7, - "sys_boot5", "sdmmc2_dir_dat3", NULL, NULL, - "gpio_7", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SYS_BOOT6, 8, - "sys_boot6", NULL, NULL, NULL, - "gpio_8", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SYS_CLKOUT1, 10, - "sys_clkout1", NULL, NULL, NULL, - "gpio_10", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SYS_CLKOUT2, 186, - "sys_clkout2", NULL, NULL, NULL, - "gpio_186", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SYS_CLKREQ, 1, - "sys_clkreq", NULL, NULL, NULL, - "gpio_1", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SYS_NIRQ, 0, - "sys_nirq", NULL, NULL, NULL, - "gpio_0", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SYS_NRESWARM, 30, - "sys_nreswarm", NULL, NULL, NULL, - "gpio_30", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SYS_OFF_MODE, 9, - "sys_off_mode", NULL, NULL, NULL, - "gpio_9", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(UART1_CTS, 150, - "uart1_cts", "ssi1_rdy_tx", NULL, NULL, - "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"), - _OMAP3_MUXENTRY(UART1_RTS, 149, - "uart1_rts", "ssi1_flag_tx", NULL, NULL, - "gpio_149", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(UART1_RX, 151, - "uart1_rx", "ssi1_wake_tx", "mcbsp1_clkr", "mcspi4_clk", - "gpio_151", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(UART1_TX, 148, - "uart1_tx", "ssi1_dat_tx", NULL, NULL, - "gpio_148", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(UART2_CTS, 144, - "uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL, - "gpio_144", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(UART2_RTS, 145, - "uart2_rts", "mcbsp3_dr", "gpt10_pwm_evt", NULL, - "gpio_145", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(UART2_RX, 147, - "uart2_rx", "mcbsp3_fsx", "gpt8_pwm_evt", NULL, - "gpio_147", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(UART2_TX, 146, - "uart2_tx", "mcbsp3_clkx", "gpt11_pwm_evt", NULL, - "gpio_146", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(UART3_CTS_RCTX, 163, - "uart3_cts_rctx", NULL, NULL, NULL, - "gpio_163", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(UART3_RTS_SD, 164, - "uart3_rts_sd", NULL, NULL, NULL, - "gpio_164", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(UART3_RX_IRRX, 165, - "uart3_rx_irrx", NULL, NULL, NULL, - "gpio_165", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(UART3_TX_IRTX, 166, - "uart3_tx_irtx", NULL, NULL, NULL, - "gpio_166", NULL, NULL, "safe_mode"), - - /* Only on 3630, see omap36xx_cbp_subset for the signals */ - _OMAP3_MUXENTRY(GPMC_A11, 0, - NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0, - NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_MREAD, 0, - NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_MWRITE, 0, - NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0, - NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_SREAD, 0, - NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_SWRITE, 0, - NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(GPMC_A11, 0, - NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_MCAD28, 0, - NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_MCAD29, 0, - NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_MCAD32, 0, - NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_MCAD33, 0, - NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_MCAD34, 0, - NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_MCAD35, 0, - NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_MCAD36, 0, - NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; - -/* - * Signals different on CBC package compared to the superset - */ -#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBC) -static struct omap_mux __initdata omap3_cbc_subset[] = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#else -#define omap3_cbc_subset NULL -#endif - -/* - * Balls for CBC package - * 515-pin s-PBGA Package, 0.65mm Ball Pitch (Top), 0.50mm Ball Pitch (Bottom) - * - * FIXME: What's up with the outdated TI documentation? See: - * - * http://wiki.davincidsp.com/index.php/Datasheet_Errata_for_OMAP35x_CBC_Package - * http://community.ti.com/forums/t/10982.aspx - */ -#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ - && defined(CONFIG_OMAP_PACKAGE_CBC) -static struct omap_ball __initdata omap3_cbc_ball[] = { - _OMAP3_BALLENTRY(CAM_D0, "ae16", NULL), - _OMAP3_BALLENTRY(CAM_D1, "ae15", NULL), - _OMAP3_BALLENTRY(CAM_D10, "d25", NULL), - _OMAP3_BALLENTRY(CAM_D11, "e26", NULL), - _OMAP3_BALLENTRY(CAM_D2, "a24", NULL), - _OMAP3_BALLENTRY(CAM_D3, "b24", NULL), - _OMAP3_BALLENTRY(CAM_D4, "d24", NULL), - _OMAP3_BALLENTRY(CAM_D5, "c24", NULL), - _OMAP3_BALLENTRY(CAM_D6, "p25", NULL), - _OMAP3_BALLENTRY(CAM_D7, "p26", NULL), - _OMAP3_BALLENTRY(CAM_D8, "n25", NULL), - _OMAP3_BALLENTRY(CAM_D9, "n26", NULL), - _OMAP3_BALLENTRY(CAM_FLD, "b23", NULL), - _OMAP3_BALLENTRY(CAM_HS, "c23", NULL), - _OMAP3_BALLENTRY(CAM_PCLK, "c26", NULL), - _OMAP3_BALLENTRY(CAM_STROBE, "d26", NULL), - _OMAP3_BALLENTRY(CAM_VS, "d23", NULL), - _OMAP3_BALLENTRY(CAM_WEN, "a23", NULL), - _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL), - _OMAP3_BALLENTRY(CAM_XCLKB, "e25", NULL), - _OMAP3_BALLENTRY(CSI2_DX0, "ad17", NULL), - _OMAP3_BALLENTRY(CSI2_DX1, "ae18", NULL), - _OMAP3_BALLENTRY(CSI2_DY0, "ad16", NULL), - _OMAP3_BALLENTRY(CSI2_DY1, "ae17", NULL), - _OMAP3_BALLENTRY(DSS_ACBIAS, "f26", NULL), - _OMAP3_BALLENTRY(DSS_DATA0, "ae21", NULL), - _OMAP3_BALLENTRY(DSS_DATA1, "ae22", NULL), - _OMAP3_BALLENTRY(DSS_DATA10, "ac26", NULL), - _OMAP3_BALLENTRY(DSS_DATA11, "ad26", NULL), - _OMAP3_BALLENTRY(DSS_DATA12, "aa25", NULL), - _OMAP3_BALLENTRY(DSS_DATA13, "y25", NULL), - _OMAP3_BALLENTRY(DSS_DATA14, "aa26", NULL), - _OMAP3_BALLENTRY(DSS_DATA15, "ab26", NULL), - _OMAP3_BALLENTRY(DSS_DATA16, "l25", NULL), - _OMAP3_BALLENTRY(DSS_DATA17, "l26", NULL), - _OMAP3_BALLENTRY(DSS_DATA18, "m24", NULL), - _OMAP3_BALLENTRY(DSS_DATA19, "m26", NULL), - _OMAP3_BALLENTRY(DSS_DATA2, "ae23", NULL), - _OMAP3_BALLENTRY(DSS_DATA20, "f25", NULL), - _OMAP3_BALLENTRY(DSS_DATA21, "n24", NULL), - _OMAP3_BALLENTRY(DSS_DATA22, "ac25", NULL), - _OMAP3_BALLENTRY(DSS_DATA23, "ab25", NULL), - _OMAP3_BALLENTRY(DSS_DATA3, "ae24", NULL), - _OMAP3_BALLENTRY(DSS_DATA4, "ad23", NULL), - _OMAP3_BALLENTRY(DSS_DATA5, "ad24", NULL), - _OMAP3_BALLENTRY(DSS_DATA6, "g26", NULL), - _OMAP3_BALLENTRY(DSS_DATA7, "h25", NULL), - _OMAP3_BALLENTRY(DSS_DATA8, "h26", NULL), - _OMAP3_BALLENTRY(DSS_DATA9, "j26", NULL), - _OMAP3_BALLENTRY(DSS_HSYNC, "k24", NULL), - _OMAP3_BALLENTRY(DSS_PCLK, "g25", NULL), - _OMAP3_BALLENTRY(DSS_VSYNC, "m25", NULL), - _OMAP3_BALLENTRY(ETK_CLK, "ab2", NULL), - _OMAP3_BALLENTRY(ETK_CTL, "ab3", NULL), - _OMAP3_BALLENTRY(ETK_D0, "ac3", NULL), - _OMAP3_BALLENTRY(ETK_D1, "ad4", NULL), - _OMAP3_BALLENTRY(ETK_D10, "ae4", NULL), - _OMAP3_BALLENTRY(ETK_D11, "af6", NULL), - _OMAP3_BALLENTRY(ETK_D12, "ae6", NULL), - _OMAP3_BALLENTRY(ETK_D13, "af7", NULL), - _OMAP3_BALLENTRY(ETK_D14, "af9", NULL), - _OMAP3_BALLENTRY(ETK_D15, "ae9", NULL), - _OMAP3_BALLENTRY(ETK_D2, "ad3", NULL), - _OMAP3_BALLENTRY(ETK_D3, "aa3", NULL), - _OMAP3_BALLENTRY(ETK_D4, "y3", NULL), - _OMAP3_BALLENTRY(ETK_D5, "ab1", NULL), - _OMAP3_BALLENTRY(ETK_D6, "ae3", NULL), - _OMAP3_BALLENTRY(ETK_D7, "ad2", NULL), - _OMAP3_BALLENTRY(ETK_D8, "aa4", NULL), - _OMAP3_BALLENTRY(ETK_D9, "v2", NULL), - _OMAP3_BALLENTRY(GPMC_A1, "j2", NULL), - _OMAP3_BALLENTRY(GPMC_A10, "d2", NULL), - _OMAP3_BALLENTRY(GPMC_A2, "h1", NULL), - _OMAP3_BALLENTRY(GPMC_A3, "h2", NULL), - _OMAP3_BALLENTRY(GPMC_A4, "g2", NULL), - _OMAP3_BALLENTRY(GPMC_A5, "f1", NULL), - _OMAP3_BALLENTRY(GPMC_A6, "f2", NULL), - _OMAP3_BALLENTRY(GPMC_A7, "e1", NULL), - _OMAP3_BALLENTRY(GPMC_A8, "e2", NULL), - _OMAP3_BALLENTRY(GPMC_A9, "d1", NULL), - _OMAP3_BALLENTRY(GPMC_CLK, "n1", "l1"), - _OMAP3_BALLENTRY(GPMC_D10, "t1", "n1"), - _OMAP3_BALLENTRY(GPMC_D11, "u2", "p2"), - _OMAP3_BALLENTRY(GPMC_D12, "u1", "p1"), - _OMAP3_BALLENTRY(GPMC_D13, "p1", "m1"), - _OMAP3_BALLENTRY(GPMC_D14, "l2", "j2"), - _OMAP3_BALLENTRY(GPMC_D15, "m2", "k2"), - _OMAP3_BALLENTRY(GPMC_D8, "v1", "r1"), - _OMAP3_BALLENTRY(GPMC_D9, "y1", "t1"), - _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k2", NULL), - _OMAP3_BALLENTRY(GPMC_NBE1, "j1", NULL), - _OMAP3_BALLENTRY(GPMC_NCS1, "ad1", "w1"), - _OMAP3_BALLENTRY(GPMC_NCS2, "a3", NULL), - _OMAP3_BALLENTRY(GPMC_NCS3, "b6", NULL), - _OMAP3_BALLENTRY(GPMC_NCS4, "b4", NULL), - _OMAP3_BALLENTRY(GPMC_NCS5, "c4", NULL), - _OMAP3_BALLENTRY(GPMC_NCS6, "b5", NULL), - _OMAP3_BALLENTRY(GPMC_NCS7, "c5", NULL), - _OMAP3_BALLENTRY(GPMC_NWP, "ac6", "y5"), - _OMAP3_BALLENTRY(GPMC_WAIT1, "ac8", "y8"), - _OMAP3_BALLENTRY(GPMC_WAIT2, "b3", NULL), - _OMAP3_BALLENTRY(GPMC_WAIT3, "c6", NULL), - _OMAP3_BALLENTRY(HDQ_SIO, "j23", NULL), - _OMAP3_BALLENTRY(HSUSB0_CLK, "w19", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA0, "v20", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA1, "y20", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA2, "v18", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA3, "w20", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA4, "w17", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA5, "y18", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA6, "y19", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA7, "y17", NULL), - _OMAP3_BALLENTRY(HSUSB0_DIR, "v19", NULL), - _OMAP3_BALLENTRY(HSUSB0_NXT, "w18", NULL), - _OMAP3_BALLENTRY(HSUSB0_STP, "u20", NULL), - _OMAP3_BALLENTRY(I2C2_SCL, "c2", NULL), - _OMAP3_BALLENTRY(I2C2_SDA, "c1", NULL), - _OMAP3_BALLENTRY(I2C3_SCL, "ab4", NULL), - _OMAP3_BALLENTRY(I2C3_SDA, "ac4", NULL), - _OMAP3_BALLENTRY(I2C4_SCL, "ad15", NULL), - _OMAP3_BALLENTRY(I2C4_SDA, "w16", NULL), - _OMAP3_BALLENTRY(JTAG_EMU0, "y15", NULL), - _OMAP3_BALLENTRY(JTAG_EMU1, "y14", NULL), - _OMAP3_BALLENTRY(MCBSP1_CLKR, "u19", NULL), - _OMAP3_BALLENTRY(MCBSP1_CLKX, "t17", NULL), - _OMAP3_BALLENTRY(MCBSP1_DR, "t20", NULL), - _OMAP3_BALLENTRY(MCBSP1_DX, "u17", NULL), - _OMAP3_BALLENTRY(MCBSP1_FSR, "v17", NULL), - _OMAP3_BALLENTRY(MCBSP1_FSX, "p20", NULL), - _OMAP3_BALLENTRY(MCBSP2_CLKX, "r18", NULL), - _OMAP3_BALLENTRY(MCBSP2_DR, "t18", NULL), - _OMAP3_BALLENTRY(MCBSP2_DX, "r19", NULL), - _OMAP3_BALLENTRY(MCBSP2_FSX, "u18", NULL), - _OMAP3_BALLENTRY(MCBSP3_CLKX, "u3", NULL), - _OMAP3_BALLENTRY(MCBSP3_DR, "n3", NULL), - _OMAP3_BALLENTRY(MCBSP3_DX, "p3", NULL), - _OMAP3_BALLENTRY(MCBSP3_FSX, "w3", NULL), - _OMAP3_BALLENTRY(MCBSP4_CLKX, "v3", NULL), - _OMAP3_BALLENTRY(MCBSP4_DR, "u4", NULL), - _OMAP3_BALLENTRY(MCBSP4_DX, "r3", NULL), - _OMAP3_BALLENTRY(MCBSP4_FSX, "t3", NULL), - _OMAP3_BALLENTRY(MCBSP_CLKS, "t19", NULL), - _OMAP3_BALLENTRY(MCSPI1_CLK, "p9", NULL), - _OMAP3_BALLENTRY(MCSPI1_CS0, "r7", NULL), - _OMAP3_BALLENTRY(MCSPI1_CS1, "r8", NULL), - _OMAP3_BALLENTRY(MCSPI1_CS2, "r9", NULL), - _OMAP3_BALLENTRY(MCSPI1_CS3, "t8", NULL), - _OMAP3_BALLENTRY(MCSPI1_SIMO, "p8", NULL), - _OMAP3_BALLENTRY(MCSPI1_SOMI, "p7", NULL), - _OMAP3_BALLENTRY(MCSPI2_CLK, "w7", NULL), - _OMAP3_BALLENTRY(MCSPI2_CS0, "v8", NULL), - _OMAP3_BALLENTRY(MCSPI2_CS1, "v9", NULL), - _OMAP3_BALLENTRY(MCSPI2_SIMO, "w8", NULL), - _OMAP3_BALLENTRY(MCSPI2_SOMI, "u8", NULL), - _OMAP3_BALLENTRY(SDMMC1_CLK, "n19", NULL), - _OMAP3_BALLENTRY(SDMMC1_CMD, "l18", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT0, "m19", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT1, "m18", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT2, "k18", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT3, "n20", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT4, "m20", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT5, "p17", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT6, "p18", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT7, "p19", NULL), - _OMAP3_BALLENTRY(SDMMC2_CLK, "w10", NULL), - _OMAP3_BALLENTRY(SDMMC2_CMD, "r10", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT0, "t10", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT1, "t9", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT2, "u10", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT3, "u9", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT4, "v10", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT5, "m3", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT6, "l3", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT7, "k3", NULL), - _OMAP3_BALLENTRY(SYS_BOOT0, "f3", NULL), - _OMAP3_BALLENTRY(SYS_BOOT1, "d3", NULL), - _OMAP3_BALLENTRY(SYS_BOOT2, "c3", NULL), - _OMAP3_BALLENTRY(SYS_BOOT3, "e3", NULL), - _OMAP3_BALLENTRY(SYS_BOOT4, "e4", NULL), - _OMAP3_BALLENTRY(SYS_BOOT5, "g3", NULL), - _OMAP3_BALLENTRY(SYS_BOOT6, "d4", NULL), - _OMAP3_BALLENTRY(SYS_CLKOUT1, "ae14", NULL), - _OMAP3_BALLENTRY(SYS_CLKOUT2, "w11", NULL), - _OMAP3_BALLENTRY(SYS_CLKREQ, "w15", NULL), - _OMAP3_BALLENTRY(SYS_NIRQ, "v16", NULL), - _OMAP3_BALLENTRY(SYS_NRESWARM, "ad7", "aa5"), - _OMAP3_BALLENTRY(SYS_OFF_MODE, "v12", NULL), - _OMAP3_BALLENTRY(UART1_CTS, "w2", NULL), - _OMAP3_BALLENTRY(UART1_RTS, "r2", NULL), - _OMAP3_BALLENTRY(UART1_RX, "h3", NULL), - _OMAP3_BALLENTRY(UART1_TX, "l4", NULL), - _OMAP3_BALLENTRY(UART2_CTS, "y24", NULL), - _OMAP3_BALLENTRY(UART2_RTS, "aa24", NULL), - _OMAP3_BALLENTRY(UART2_RX, "ad21", NULL), - _OMAP3_BALLENTRY(UART2_TX, "ad22", NULL), - _OMAP3_BALLENTRY(UART3_CTS_RCTX, "f23", NULL), - _OMAP3_BALLENTRY(UART3_RTS_SD, "f24", NULL), - _OMAP3_BALLENTRY(UART3_RX_IRRX, "h24", NULL), - _OMAP3_BALLENTRY(UART3_TX_IRTX, "g24", NULL), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#else -#define omap3_cbc_ball NULL -#endif - -/* - * Signals different on CUS package compared to superset - */ -#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CUS) -static struct omap_mux __initdata omap3_cus_subset[] = { - _OMAP3_MUXENTRY(CAM_D10, 109, - "cam_d10", NULL, NULL, NULL, - "gpio_109", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D11, 110, - "cam_d11", NULL, NULL, NULL, - "gpio_110", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D2, 101, - "cam_d2", NULL, NULL, NULL, - "gpio_101", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D3, 102, - "cam_d3", NULL, NULL, NULL, - "gpio_102", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D4, 103, - "cam_d4", NULL, NULL, NULL, - "gpio_103", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D5, 104, - "cam_d5", NULL, NULL, NULL, - "gpio_104", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_FLD, 98, - "cam_fld", NULL, "cam_global_reset", NULL, - "gpio_98", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_HS, 94, - "cam_hs", NULL, NULL, NULL, - "gpio_94", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_PCLK, 97, - "cam_pclk", NULL, NULL, NULL, - "gpio_97", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_STROBE, 126, - "cam_strobe", NULL, NULL, NULL, - "gpio_126", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_VS, 95, - "cam_vs", NULL, NULL, NULL, - "gpio_95", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_WEN, 167, - "cam_wen", NULL, "cam_shutter", NULL, - "gpio_167", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA6, 76, - "dss_data6", NULL, "uart1_tx", NULL, - "gpio_76", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA7, 77, - "dss_data7", NULL, "uart1_rx", NULL, - "gpio_77", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA8, 78, - "dss_data8", NULL, NULL, NULL, - "gpio_78", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA9, 79, - "dss_data9", NULL, NULL, NULL, - "gpio_79", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_HSYNC, 67, - "dss_hsync", NULL, NULL, NULL, - "gpio_67", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_PCLK, 66, - "dss_pclk", NULL, NULL, NULL, - "gpio_66", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(ETK_CLK, 12, - "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp", - "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL), - _OMAP3_MUXENTRY(ETK_CTL, 13, - "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk", - "gpio_13", NULL, "hsusb1_tll_clk", NULL), - _OMAP3_MUXENTRY(ETK_D0, 14, - "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0", - "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL), - _OMAP3_MUXENTRY(ETK_D1, 15, - "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1", - "gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL), - _OMAP3_MUXENTRY(ETK_D10, 24, - "etk_d10", NULL, "uart1_rx", "hsusb2_clk", - "gpio_24", NULL, "hsusb2_tll_clk", NULL), - _OMAP3_MUXENTRY(ETK_D11, 25, - "etk_d11", NULL, NULL, "hsusb2_stp", - "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL), - _OMAP3_MUXENTRY(ETK_D12, 26, - "etk_d12", NULL, NULL, "hsusb2_dir", - "gpio_26", NULL, "hsusb2_tll_dir", NULL), - _OMAP3_MUXENTRY(ETK_D13, 27, - "etk_d13", NULL, NULL, "hsusb2_nxt", - "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL), - _OMAP3_MUXENTRY(ETK_D14, 28, - "etk_d14", NULL, NULL, "hsusb2_data0", - "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL), - _OMAP3_MUXENTRY(ETK_D15, 29, - "etk_d15", NULL, NULL, "hsusb2_data1", - "gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL), - _OMAP3_MUXENTRY(ETK_D2, 16, - "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2", - "gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL), - _OMAP3_MUXENTRY(ETK_D3, 17, - "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7", - "gpio_17", NULL, "hsusb1_tll_data7", NULL), - _OMAP3_MUXENTRY(ETK_D4, 18, - "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4", - "gpio_18", NULL, "hsusb1_tll_data4", NULL), - _OMAP3_MUXENTRY(ETK_D5, 19, - "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5", - "gpio_19", NULL, "hsusb1_tll_data5", NULL), - _OMAP3_MUXENTRY(ETK_D6, 20, - "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6", - "gpio_20", NULL, "hsusb1_tll_data6", NULL), - _OMAP3_MUXENTRY(ETK_D7, 21, - "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3", - "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL), - _OMAP3_MUXENTRY(ETK_D8, 22, - "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir", - "gpio_22", NULL, "hsusb1_tll_dir", NULL), - _OMAP3_MUXENTRY(ETK_D9, 23, - "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt", - "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL), - _OMAP3_MUXENTRY(MCBSP3_CLKX, 142, - "mcbsp3_clkx", "uart2_tx", NULL, NULL, - "gpio_142", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP3_DR, 141, - "mcbsp3_dr", "uart2_rts", NULL, NULL, - "gpio_141", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP3_DX, 140, - "mcbsp3_dx", "uart2_cts", NULL, NULL, - "gpio_140", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP3_FSX, 143, - "mcbsp3_fsx", "uart2_rx", NULL, NULL, - "gpio_143", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC2_DAT5, 137, - "sdmmc2_dat5", "sdmmc2_dir_dat1", - "cam_global_reset", "sdmmc3_dat1", - "gpio_137", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC2_DAT6, 138, - "sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2", - "gpio_138", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC2_DAT7, 139, - "sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3", - "gpio_139", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(UART1_CTS, 150, - "uart1_cts", NULL, NULL, NULL, - "gpio_150", NULL, NULL, "safe_mode"), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#else -#define omap3_cus_subset NULL -#endif - -/* - * Balls for CUS package - * 423-pin s-PBGA Package, 0.65mm Ball Pitch (Bottom) - */ -#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ - && defined(CONFIG_OMAP_PACKAGE_CUS) -static struct omap_ball __initdata omap3_cus_ball[] = { - _OMAP3_BALLENTRY(CAM_D0, "ab18", NULL), - _OMAP3_BALLENTRY(CAM_D1, "ac18", NULL), - _OMAP3_BALLENTRY(CAM_D10, "f21", NULL), - _OMAP3_BALLENTRY(CAM_D11, "g21", NULL), - _OMAP3_BALLENTRY(CAM_D2, "g19", NULL), - _OMAP3_BALLENTRY(CAM_D3, "f19", NULL), - _OMAP3_BALLENTRY(CAM_D4, "g20", NULL), - _OMAP3_BALLENTRY(CAM_D5, "b21", NULL), - _OMAP3_BALLENTRY(CAM_D6, "l24", NULL), - _OMAP3_BALLENTRY(CAM_D7, "k24", NULL), - _OMAP3_BALLENTRY(CAM_D8, "j23", NULL), - _OMAP3_BALLENTRY(CAM_D9, "k23", NULL), - _OMAP3_BALLENTRY(CAM_FLD, "h24", NULL), - _OMAP3_BALLENTRY(CAM_HS, "a22", NULL), - _OMAP3_BALLENTRY(CAM_PCLK, "j19", NULL), - _OMAP3_BALLENTRY(CAM_STROBE, "j20", NULL), - _OMAP3_BALLENTRY(CAM_VS, "e18", NULL), - _OMAP3_BALLENTRY(CAM_WEN, "f18", NULL), - _OMAP3_BALLENTRY(CAM_XCLKA, "b22", NULL), - _OMAP3_BALLENTRY(CAM_XCLKB, "c22", NULL), - _OMAP3_BALLENTRY(DSS_ACBIAS, "j21", NULL), - _OMAP3_BALLENTRY(DSS_DATA0, "ac19", NULL), - _OMAP3_BALLENTRY(DSS_DATA1, "ab19", NULL), - _OMAP3_BALLENTRY(DSS_DATA10, "ac22", NULL), - _OMAP3_BALLENTRY(DSS_DATA11, "ac23", NULL), - _OMAP3_BALLENTRY(DSS_DATA12, "ab22", NULL), - _OMAP3_BALLENTRY(DSS_DATA13, "y22", NULL), - _OMAP3_BALLENTRY(DSS_DATA14, "w22", NULL), - _OMAP3_BALLENTRY(DSS_DATA15, "v22", NULL), - _OMAP3_BALLENTRY(DSS_DATA16, "j22", NULL), - _OMAP3_BALLENTRY(DSS_DATA17, "g23", NULL), - _OMAP3_BALLENTRY(DSS_DATA18, "g24", NULL), - _OMAP3_BALLENTRY(DSS_DATA19, "h23", NULL), - _OMAP3_BALLENTRY(DSS_DATA2, "ad20", NULL), - _OMAP3_BALLENTRY(DSS_DATA20, "d23", NULL), - _OMAP3_BALLENTRY(DSS_DATA21, "k22", NULL), - _OMAP3_BALLENTRY(DSS_DATA22, "v21", NULL), - _OMAP3_BALLENTRY(DSS_DATA23, "w21", NULL), - _OMAP3_BALLENTRY(DSS_DATA3, "ac20", NULL), - _OMAP3_BALLENTRY(DSS_DATA4, "ad21", NULL), - _OMAP3_BALLENTRY(DSS_DATA5, "ac21", NULL), - _OMAP3_BALLENTRY(DSS_DATA6, "d24", NULL), - _OMAP3_BALLENTRY(DSS_DATA7, "e23", NULL), - _OMAP3_BALLENTRY(DSS_DATA8, "e24", NULL), - _OMAP3_BALLENTRY(DSS_DATA9, "f23", NULL), - _OMAP3_BALLENTRY(DSS_HSYNC, "e22", NULL), - _OMAP3_BALLENTRY(DSS_PCLK, "g22", NULL), - _OMAP3_BALLENTRY(DSS_VSYNC, "f22", NULL), - _OMAP3_BALLENTRY(ETK_CLK, "ac1", NULL), - _OMAP3_BALLENTRY(ETK_CTL, "ad3", NULL), - _OMAP3_BALLENTRY(ETK_D0, "ad6", NULL), - _OMAP3_BALLENTRY(ETK_D1, "ac6", NULL), - _OMAP3_BALLENTRY(ETK_D10, "ac3", NULL), - _OMAP3_BALLENTRY(ETK_D11, "ac9", NULL), - _OMAP3_BALLENTRY(ETK_D12, "ac10", NULL), - _OMAP3_BALLENTRY(ETK_D13, "ad11", NULL), - _OMAP3_BALLENTRY(ETK_D14, "ac11", NULL), - _OMAP3_BALLENTRY(ETK_D15, "ad12", NULL), - _OMAP3_BALLENTRY(ETK_D2, "ac7", NULL), - _OMAP3_BALLENTRY(ETK_D3, "ad8", NULL), - _OMAP3_BALLENTRY(ETK_D4, "ac5", NULL), - _OMAP3_BALLENTRY(ETK_D5, "ad2", NULL), - _OMAP3_BALLENTRY(ETK_D6, "ac8", NULL), - _OMAP3_BALLENTRY(ETK_D7, "ad9", NULL), - _OMAP3_BALLENTRY(ETK_D8, "ac4", NULL), - _OMAP3_BALLENTRY(ETK_D9, "ad5", NULL), - _OMAP3_BALLENTRY(GPMC_A1, "k4", NULL), - _OMAP3_BALLENTRY(GPMC_A10, "g2", NULL), - _OMAP3_BALLENTRY(GPMC_A2, "k3", NULL), - _OMAP3_BALLENTRY(GPMC_A3, "k2", NULL), - _OMAP3_BALLENTRY(GPMC_A4, "j4", NULL), - _OMAP3_BALLENTRY(GPMC_A5, "j3", NULL), - _OMAP3_BALLENTRY(GPMC_A6, "j2", NULL), - _OMAP3_BALLENTRY(GPMC_A7, "j1", NULL), - _OMAP3_BALLENTRY(GPMC_A8, "h1", NULL), - _OMAP3_BALLENTRY(GPMC_A9, "h2", NULL), - _OMAP3_BALLENTRY(GPMC_CLK, "w2", NULL), - _OMAP3_BALLENTRY(GPMC_D10, "u1", NULL), - _OMAP3_BALLENTRY(GPMC_D11, "r3", NULL), - _OMAP3_BALLENTRY(GPMC_D12, "t3", NULL), - _OMAP3_BALLENTRY(GPMC_D13, "u2", NULL), - _OMAP3_BALLENTRY(GPMC_D14, "v1", NULL), - _OMAP3_BALLENTRY(GPMC_D15, "v2", NULL), - _OMAP3_BALLENTRY(GPMC_D8, "r2", NULL), - _OMAP3_BALLENTRY(GPMC_D9, "t2", NULL), - _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k5", NULL), - _OMAP3_BALLENTRY(GPMC_NBE1, "l1", NULL), - _OMAP3_BALLENTRY(GPMC_NCS3, "d2", NULL), - _OMAP3_BALLENTRY(GPMC_NCS4, "f4", NULL), - _OMAP3_BALLENTRY(GPMC_NCS5, "g5", NULL), - _OMAP3_BALLENTRY(GPMC_NCS6, "f3", NULL), - _OMAP3_BALLENTRY(GPMC_NCS7, "g4", NULL), - _OMAP3_BALLENTRY(GPMC_NWP, "e1", NULL), - _OMAP3_BALLENTRY(GPMC_WAIT3, "c2", NULL), - _OMAP3_BALLENTRY(HDQ_SIO, "a24", NULL), - _OMAP3_BALLENTRY(HSUSB0_CLK, "r21", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA0, "t24", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA1, "t23", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA2, "u24", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA3, "u23", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA4, "w24", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA5, "v23", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA6, "w23", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA7, "t22", NULL), - _OMAP3_BALLENTRY(HSUSB0_DIR, "p23", NULL), - _OMAP3_BALLENTRY(HSUSB0_NXT, "r22", NULL), - _OMAP3_BALLENTRY(HSUSB0_STP, "r23", NULL), - _OMAP3_BALLENTRY(I2C2_SCL, "ac15", NULL), - _OMAP3_BALLENTRY(I2C2_SDA, "ac14", NULL), - _OMAP3_BALLENTRY(I2C3_SCL, "ac13", NULL), - _OMAP3_BALLENTRY(I2C3_SDA, "ac12", NULL), - _OMAP3_BALLENTRY(I2C4_SCL, "y16", NULL), - _OMAP3_BALLENTRY(I2C4_SDA, "y15", NULL), - _OMAP3_BALLENTRY(JTAG_EMU0, "ac24", NULL), - _OMAP3_BALLENTRY(JTAG_EMU1, "ad24", NULL), - _OMAP3_BALLENTRY(MCBSP1_CLKR, "w19", NULL), - _OMAP3_BALLENTRY(MCBSP1_CLKX, "v18", NULL), - _OMAP3_BALLENTRY(MCBSP1_DR, "y18", NULL), - _OMAP3_BALLENTRY(MCBSP1_DX, "w18", NULL), - _OMAP3_BALLENTRY(MCBSP1_FSR, "ab20", NULL), - _OMAP3_BALLENTRY(MCBSP1_FSX, "aa19", NULL), - _OMAP3_BALLENTRY(MCBSP2_CLKX, "t21", NULL), - _OMAP3_BALLENTRY(MCBSP2_DR, "v19", NULL), - _OMAP3_BALLENTRY(MCBSP2_DX, "r20", NULL), - _OMAP3_BALLENTRY(MCBSP2_FSX, "v20", NULL), - _OMAP3_BALLENTRY(MCBSP3_CLKX, "w4", NULL), - _OMAP3_BALLENTRY(MCBSP3_DR, "v5", NULL), - _OMAP3_BALLENTRY(MCBSP3_DX, "v6", NULL), - _OMAP3_BALLENTRY(MCBSP3_FSX, "v4", NULL), - _OMAP3_BALLENTRY(MCBSP_CLKS, "aa18", NULL), - _OMAP3_BALLENTRY(MCSPI1_CLK, "t5", NULL), - _OMAP3_BALLENTRY(MCSPI1_CS0, "t6", NULL), - _OMAP3_BALLENTRY(MCSPI1_CS3, "r5", NULL), - _OMAP3_BALLENTRY(MCSPI1_SIMO, "r4", NULL), - _OMAP3_BALLENTRY(MCSPI1_SOMI, "t4", NULL), - _OMAP3_BALLENTRY(MCSPI2_CLK, "n5", NULL), - _OMAP3_BALLENTRY(MCSPI2_CS0, "m5", NULL), - _OMAP3_BALLENTRY(MCSPI2_CS1, "m4", NULL), - _OMAP3_BALLENTRY(MCSPI2_SIMO, "n4", NULL), - _OMAP3_BALLENTRY(MCSPI2_SOMI, "n3", NULL), - _OMAP3_BALLENTRY(SDMMC1_CLK, "m23", NULL), - _OMAP3_BALLENTRY(SDMMC1_CMD, "l23", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT0, "m22", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT1, "m21", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT2, "m20", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT3, "n23", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT4, "n22", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT5, "n21", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT6, "n20", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT7, "p24", NULL), - _OMAP3_BALLENTRY(SDMMC2_CLK, "y1", NULL), - _OMAP3_BALLENTRY(SDMMC2_CMD, "ab5", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT0, "ab3", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT1, "y3", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT2, "w3", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT3, "v3", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT4, "ab2", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT5, "aa2", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT6, "y2", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT7, "aa1", NULL), - _OMAP3_BALLENTRY(SYS_BOOT0, "ab12", NULL), - _OMAP3_BALLENTRY(SYS_BOOT1, "ac16", NULL), - _OMAP3_BALLENTRY(SYS_BOOT2, "ad17", NULL), - _OMAP3_BALLENTRY(SYS_BOOT3, "ad18", NULL), - _OMAP3_BALLENTRY(SYS_BOOT4, "ac17", NULL), - _OMAP3_BALLENTRY(SYS_BOOT5, "ab16", NULL), - _OMAP3_BALLENTRY(SYS_BOOT6, "aa15", NULL), - _OMAP3_BALLENTRY(SYS_CLKOUT1, "y7", NULL), - _OMAP3_BALLENTRY(SYS_CLKOUT2, "aa6", NULL), - _OMAP3_BALLENTRY(SYS_CLKREQ, "y13", NULL), - _OMAP3_BALLENTRY(SYS_NIRQ, "w16", NULL), - _OMAP3_BALLENTRY(SYS_NRESWARM, "y10", NULL), - _OMAP3_BALLENTRY(SYS_OFF_MODE, "ad23", NULL), - _OMAP3_BALLENTRY(UART1_CTS, "ac2", NULL), - _OMAP3_BALLENTRY(UART1_RTS, "w6", NULL), - _OMAP3_BALLENTRY(UART1_RX, "v7", NULL), - _OMAP3_BALLENTRY(UART1_TX, "w7", NULL), - _OMAP3_BALLENTRY(UART3_CTS_RCTX, "a23", NULL), - _OMAP3_BALLENTRY(UART3_RTS_SD, "b23", NULL), - _OMAP3_BALLENTRY(UART3_RX_IRRX, "b24", NULL), - _OMAP3_BALLENTRY(UART3_TX_IRTX, "c23", NULL), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#else -#define omap3_cus_ball NULL -#endif - -/* - * Signals different on CBB package compared to superset - */ -#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBB) -static struct omap_mux __initdata omap3_cbb_subset[] = { - _OMAP3_MUXENTRY(CAM_D10, 109, - "cam_d10", NULL, NULL, NULL, - "gpio_109", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D11, 110, - "cam_d11", NULL, NULL, NULL, - "gpio_110", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D2, 101, - "cam_d2", NULL, NULL, NULL, - "gpio_101", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D3, 102, - "cam_d3", NULL, NULL, NULL, - "gpio_102", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D4, 103, - "cam_d4", NULL, NULL, NULL, - "gpio_103", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D5, 104, - "cam_d5", NULL, NULL, NULL, - "gpio_104", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_FLD, 98, - "cam_fld", NULL, "cam_global_reset", NULL, - "gpio_98", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_HS, 94, - "cam_hs", NULL, NULL, NULL, - "gpio_94", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_PCLK, 97, - "cam_pclk", NULL, NULL, NULL, - "gpio_97", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_STROBE, 126, - "cam_strobe", NULL, NULL, NULL, - "gpio_126", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_VS, 95, - "cam_vs", NULL, NULL, NULL, - "gpio_95", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_WEN, 167, - "cam_wen", NULL, "cam_shutter", NULL, - "gpio_167", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA6, 76, - "dss_data6", NULL, "uart1_tx", NULL, - "gpio_76", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA7, 77, - "dss_data7", NULL, "uart1_rx", NULL, - "gpio_77", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA8, 78, - "dss_data8", NULL, NULL, NULL, - "gpio_78", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA9, 79, - "dss_data9", NULL, NULL, NULL, - "gpio_79", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_HSYNC, 67, - "dss_hsync", NULL, NULL, NULL, - "gpio_67", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_PCLK, 66, - "dss_pclk", NULL, NULL, NULL, - "gpio_66", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(ETK_CLK, 12, - "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp", - "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL), - _OMAP3_MUXENTRY(ETK_CTL, 13, - "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk", - "gpio_13", NULL, "hsusb1_tll_clk", NULL), - _OMAP3_MUXENTRY(ETK_D0, 14, - "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0", - "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL), - _OMAP3_MUXENTRY(ETK_D1, 15, - "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1", - "gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL), - _OMAP3_MUXENTRY(ETK_D10, 24, - "etk_d10", NULL, "uart1_rx", "hsusb2_clk", - "gpio_24", NULL, "hsusb2_tll_clk", NULL), - _OMAP3_MUXENTRY(ETK_D11, 25, - "etk_d11", NULL, NULL, "hsusb2_stp", - "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL), - _OMAP3_MUXENTRY(ETK_D12, 26, - "etk_d12", NULL, NULL, "hsusb2_dir", - "gpio_26", NULL, "hsusb2_tll_dir", NULL), - _OMAP3_MUXENTRY(ETK_D13, 27, - "etk_d13", NULL, NULL, "hsusb2_nxt", - "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL), - _OMAP3_MUXENTRY(ETK_D14, 28, - "etk_d14", NULL, NULL, "hsusb2_data0", - "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL), - _OMAP3_MUXENTRY(ETK_D15, 29, - "etk_d15", NULL, NULL, "hsusb2_data1", - "gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL), - _OMAP3_MUXENTRY(ETK_D2, 16, - "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2", - "gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL), - _OMAP3_MUXENTRY(ETK_D3, 17, - "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7", - "gpio_17", NULL, "hsusb1_tll_data7", NULL), - _OMAP3_MUXENTRY(ETK_D4, 18, - "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4", - "gpio_18", NULL, "hsusb1_tll_data4", NULL), - _OMAP3_MUXENTRY(ETK_D5, 19, - "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5", - "gpio_19", NULL, "hsusb1_tll_data5", NULL), - _OMAP3_MUXENTRY(ETK_D6, 20, - "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6", - "gpio_20", NULL, "hsusb1_tll_data6", NULL), - _OMAP3_MUXENTRY(ETK_D7, 21, - "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3", - "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL), - _OMAP3_MUXENTRY(ETK_D8, 22, - "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir", - "gpio_22", NULL, "hsusb1_tll_dir", NULL), - _OMAP3_MUXENTRY(ETK_D9, 23, - "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt", - "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#else -#define omap3_cbb_subset NULL -#endif - -/* - * Balls for CBB package - * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom) - */ -#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ - && defined(CONFIG_OMAP_PACKAGE_CBB) -static struct omap_ball __initdata omap3_cbb_ball[] = { - _OMAP3_BALLENTRY(CAM_D0, "ag17", NULL), - _OMAP3_BALLENTRY(CAM_D1, "ah17", NULL), - _OMAP3_BALLENTRY(CAM_D10, "b25", NULL), - _OMAP3_BALLENTRY(CAM_D11, "c26", NULL), - _OMAP3_BALLENTRY(CAM_D2, "b24", NULL), - _OMAP3_BALLENTRY(CAM_D3, "c24", NULL), - _OMAP3_BALLENTRY(CAM_D4, "d24", NULL), - _OMAP3_BALLENTRY(CAM_D5, "a25", NULL), - _OMAP3_BALLENTRY(CAM_D6, "k28", NULL), - _OMAP3_BALLENTRY(CAM_D7, "l28", NULL), - _OMAP3_BALLENTRY(CAM_D8, "k27", NULL), - _OMAP3_BALLENTRY(CAM_D9, "l27", NULL), - _OMAP3_BALLENTRY(CAM_FLD, "c23", NULL), - _OMAP3_BALLENTRY(CAM_HS, "a24", NULL), - _OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL), - _OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL), - _OMAP3_BALLENTRY(CAM_VS, "a23", NULL), - _OMAP3_BALLENTRY(CAM_WEN, "b23", NULL), - _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL), - _OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL), - _OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL), - _OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL), - _OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL), - _OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL), - _OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL), - _OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL), - _OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL), - _OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL), - _OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL), - _OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL), - _OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL), - _OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL), - _OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL), - _OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL), - _OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL), - _OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL), - _OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL), - _OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL), - _OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL), - _OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL), - _OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL), - _OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL), - _OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL), - _OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL), - _OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL), - _OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL), - _OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL), - _OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL), - _OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL), - _OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL), - _OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL), - _OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL), - _OMAP3_BALLENTRY(ETK_CLK, "af10", NULL), - _OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL), - _OMAP3_BALLENTRY(ETK_D0, "af11", NULL), - _OMAP3_BALLENTRY(ETK_D1, "ag12", NULL), - _OMAP3_BALLENTRY(ETK_D10, "ae7", NULL), - _OMAP3_BALLENTRY(ETK_D11, "af7", NULL), - _OMAP3_BALLENTRY(ETK_D12, "ag7", NULL), - _OMAP3_BALLENTRY(ETK_D13, "ah7", NULL), - _OMAP3_BALLENTRY(ETK_D14, "ag8", NULL), - _OMAP3_BALLENTRY(ETK_D15, "ah8", NULL), - _OMAP3_BALLENTRY(ETK_D2, "ah12", NULL), - _OMAP3_BALLENTRY(ETK_D3, "ae13", NULL), - _OMAP3_BALLENTRY(ETK_D4, "ae11", NULL), - _OMAP3_BALLENTRY(ETK_D5, "ah9", NULL), - _OMAP3_BALLENTRY(ETK_D6, "af13", NULL), - _OMAP3_BALLENTRY(ETK_D7, "ah14", NULL), - _OMAP3_BALLENTRY(ETK_D8, "af9", NULL), - _OMAP3_BALLENTRY(ETK_D9, "ag9", NULL), - _OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"), - _OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"), - _OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"), - _OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"), - _OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"), - _OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"), - _OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"), - _OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"), - _OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"), - _OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"), - _OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"), - _OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"), - _OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"), - _OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"), - _OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"), - _OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"), - _OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"), - _OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"), - _OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"), - _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"), - _OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL), - _OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"), - _OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL), - _OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL), - _OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL), - _OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL), - _OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL), - _OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL), - _OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"), - _OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"), - _OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL), - _OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL), - _OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL), - _OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL), - _OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL), - _OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL), - _OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL), - _OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL), - _OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL), - _OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL), - _OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL), - _OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL), - _OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL), - _OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL), - _OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL), - _OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL), - _OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL), - _OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL), - _OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL), - _OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL), - _OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL), - _OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL), - _OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL), - _OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL), - _OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL), - _OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL), - _OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL), - _OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL), - _OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL), - _OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL), - _OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL), - _OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL), - _OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL), - _OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL), - _OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL), - _OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL), - _OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL), - _OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL), - _OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL), - _OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL), - _OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL), - _OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL), - _OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL), - _OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL), - _OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL), - _OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL), - _OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL), - _OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT4, "p27", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT5, "p26", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT6, "r27", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT7, "r25", NULL), - _OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL), - _OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL), - _OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL), - _OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL), - _OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL), - _OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL), - _OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL), - _OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL), - _OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL), - _OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL), - _OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL), - _OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL), - _OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL), - _OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL), - _OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL), - _OMAP3_BALLENTRY(UART1_CTS, "w8", NULL), - _OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL), - _OMAP3_BALLENTRY(UART1_RX, "y8", NULL), - _OMAP3_BALLENTRY(UART1_TX, "aa8", NULL), - _OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL), - _OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL), - _OMAP3_BALLENTRY(UART2_RX, "ad25", NULL), - _OMAP3_BALLENTRY(UART2_TX, "aa25", NULL), - _OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL), - _OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL), - _OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL), - _OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#else -#define omap3_cbb_ball NULL -#endif - -/* - * Signals different on 36XX CBP package compared to 34XX CBC package - */ -#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBP) -static struct omap_mux __initdata omap36xx_cbp_subset[] = { - _OMAP3_MUXENTRY(CAM_D0, 99, - "cam_d0", NULL, "csi2_dx2", NULL, - "gpio_99", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D1, 100, - "cam_d1", NULL, "csi2_dy2", NULL, - "gpio_100", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D10, 109, - "cam_d10", "ssi2_wake", NULL, NULL, - "gpio_109", "hw_dbg8", NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D2, 101, - "cam_d2", "ssi2_rdy_tx", NULL, NULL, - "gpio_101", "hw_dbg4", NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D3, 102, - "cam_d3", "ssi2_dat_rx", NULL, NULL, - "gpio_102", "hw_dbg5", NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D4, 103, - "cam_d4", "ssi2_flag_rx", NULL, NULL, - "gpio_103", "hw_dbg6", NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_D5, 104, - "cam_d5", "ssi2_rdy_rx", NULL, NULL, - "gpio_104", "hw_dbg7", NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_HS, 94, - "cam_hs", "ssi2_dat_tx", NULL, NULL, - "gpio_94", "hw_dbg0", NULL, "safe_mode"), - _OMAP3_MUXENTRY(CAM_VS, 95, - "cam_vs", "ssi2_flag_tx", NULL, NULL, - "gpio_95", "hw_dbg1", NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA0, 70, - "dss_data0", "dsi_dx0", "uart1_cts", NULL, - "gpio_70", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA1, 71, - "dss_data1", "dsi_dy0", "uart1_rts", NULL, - "gpio_71", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA2, 72, - "dss_data2", "dsi_dx1", NULL, NULL, - "gpio_72", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA3, 73, - "dss_data3", "dsi_dy1", NULL, NULL, - "gpio_73", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA4, 74, - "dss_data4", "dsi_dx2", "uart3_rx_irrx", NULL, - "gpio_74", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA5, 75, - "dss_data5", "dsi_dy2", "uart3_tx_irtx", NULL, - "gpio_75", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA6, 76, - "dss_data6", NULL, "uart1_tx", "dssvenc656_data6", - "gpio_76", "hw_dbg14", NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA7, 77, - "dss_data7", NULL, "uart1_rx", "dssvenc656_data7", - "gpio_77", "hw_dbg15", NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA8, 78, - "dss_data8", NULL, "uart3_rx_irrx", NULL, - "gpio_78", "hw_dbg16", NULL, "safe_mode"), - _OMAP3_MUXENTRY(DSS_DATA9, 79, - "dss_data9", NULL, "uart3_tx_irtx", NULL, - "gpio_79", "hw_dbg17", NULL, "safe_mode"), - _OMAP3_MUXENTRY(ETK_D12, 26, - "etk_d12", "sys_drm_msecure", NULL, "hsusb2_dir", - "gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"), - _OMAP3_MUXENTRY(GPMC_A11, 0, - "gpmc_a11", NULL, NULL, NULL, - NULL, NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_WAIT2, 64, - "gpmc_wait2", NULL, "uart4_tx", NULL, - "gpio_64", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(GPMC_WAIT3, 65, - "gpmc_wait3", "sys_ndmareq1", "uart4_rx", NULL, - "gpio_65", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(HSUSB0_DATA0, 125, - "hsusb0_data0", NULL, "uart3_tx_irtx", NULL, - "gpio_125", "uart2_tx", NULL, "safe_mode"), - _OMAP3_MUXENTRY(HSUSB0_DATA1, 130, - "hsusb0_data1", NULL, "uart3_rx_irrx", NULL, - "gpio_130", "uart2_rx", NULL, "safe_mode"), - _OMAP3_MUXENTRY(HSUSB0_DATA2, 131, - "hsusb0_data2", NULL, "uart3_rts_sd", NULL, - "gpio_131", "uart2_rts", NULL, "safe_mode"), - _OMAP3_MUXENTRY(HSUSB0_DATA3, 169, - "hsusb0_data3", NULL, "uart3_cts_rctx", NULL, - "gpio_169", "uart2_cts", NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP1_CLKR, 156, - "mcbsp1_clkr", "mcspi4_clk", "sim_cd", NULL, - "gpio_156", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP1_FSR, 157, - "mcbsp1_fsr", "adpllv2d_dithering_en1", - "cam_global_reset", NULL, - "gpio_157", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(MCBSP4_CLKX, 152, - "mcbsp4_clkx", "ssi1_dat_rx", NULL, NULL, - "gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"), - _OMAP3_MUXENTRY(MCBSP4_DR, 153, - "mcbsp4_dr", "ssi1_flag_rx", NULL, NULL, - "gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"), - _OMAP3_MUXENTRY(MCBSP4_DX, 154, - "mcbsp4_dx", "ssi1_rdy_rx", NULL, NULL, - "gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"), - _OMAP3_MUXENTRY(MCBSP4_FSX, 155, - "mcbsp4_fsx", "ssi1_wake", NULL, NULL, - "gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"), - _OMAP3_MUXENTRY(MCSPI1_CS1, 175, - "mcspi1_cs1", "adpllv2d_dithering_en2", NULL, "sdmmc3_cmd", - "gpio_175", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0, - "sad2d_mbusflag", "mad2d_sbusflag", NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_MCAD28, 0, - "sad2d_mcad28", "mad2d_mcad28", NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_MCAD29, 0, - "sad2d_mcad29", "mad2d_mcad29", NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_MCAD32, 0, - "sad2d_mcad32", "mad2d_mcad32", NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_MCAD33, 0, - "sad2d_mcad33", "mad2d_mcad33", NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_MCAD34, 0, - "sad2d_mcad34", "mad2d_mcad34", NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_MCAD35, 0, - "sad2d_mcad35", "mad2d_mcad35", NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_MCAD36, 0, - "sad2d_mcad36", "mad2d_mcad36", NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_MREAD, 0, - "sad2d_mread", "mad2d_sread", NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_MWRITE, 0, - "sad2d_mwrite", "mad2d_swrite", NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0, - "sad2d_sbusflag", "mad2d_mbusflag", NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_SREAD, 0, - "sad2d_sread", "mad2d_mread", NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SAD2D_SWRITE, 0, - "sad2d_swrite", "mad2d_mwrite", NULL, NULL, - NULL, NULL, NULL, NULL), - _OMAP3_MUXENTRY(SDMMC1_CLK, 120, - "sdmmc1_clk", "ms_clk", NULL, NULL, - "gpio_120", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC1_CMD, 121, - "sdmmc1_cmd", "ms_bs", NULL, NULL, - "gpio_121", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC1_DAT0, 122, - "sdmmc1_dat0", "ms_dat0", NULL, NULL, - "gpio_122", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC1_DAT1, 123, - "sdmmc1_dat1", "ms_dat1", NULL, NULL, - "gpio_123", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC1_DAT2, 124, - "sdmmc1_dat2", "ms_dat2", NULL, NULL, - "gpio_124", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDMMC1_DAT3, 125, - "sdmmc1_dat3", "ms_dat3", NULL, NULL, - "gpio_125", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SDRC_CKE0, 0, - "sdrc_cke0", NULL, NULL, NULL, - NULL, NULL, NULL, "safe_mode_out1"), - _OMAP3_MUXENTRY(SDRC_CKE1, 0, - "sdrc_cke1", NULL, NULL, NULL, - NULL, NULL, NULL, "safe_mode_out1"), - _OMAP3_MUXENTRY(SIM_IO, 126, - "sim_io", "sim_io_low_impedance", NULL, NULL, - "gpio_126", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SIM_CLK, 127, - "sim_clk", NULL, NULL, NULL, - "gpio_127", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SIM_PWRCTRL, 128, - "sim_pwrctrl", NULL, NULL, NULL, - "gpio_128", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SIM_RST, 129, - "sim_rst", NULL, NULL, NULL, - "gpio_129", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SYS_BOOT0, 2, - "sys_boot0", NULL, NULL, "dss_data18", - "gpio_2", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SYS_BOOT1, 3, - "sys_boot1", NULL, NULL, "dss_data19", - "gpio_3", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SYS_BOOT3, 5, - "sys_boot3", NULL, NULL, "dss_data20", - "gpio_5", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SYS_BOOT4, 6, - "sys_boot4", "sdmmc2_dir_dat2", NULL, "dss_data21", - "gpio_6", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SYS_BOOT5, 7, - "sys_boot5", "sdmmc2_dir_dat3", NULL, "dss_data22", - "gpio_7", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(SYS_BOOT6, 8, - "sys_boot6", NULL, NULL, "dss_data23", - "gpio_8", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(UART1_CTS, 150, - "uart1_cts", "ssi1_rdy_tx", NULL, NULL, - "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"), - _OMAP3_MUXENTRY(UART1_RTS, 149, - "uart1_rts", "ssi1_flag_tx", NULL, NULL, - "gpio_149", NULL, NULL, "safe_mode"), - _OMAP3_MUXENTRY(UART1_TX, 148, - "uart1_tx", "ssi1_dat_tx", NULL, NULL, - "gpio_148", NULL, NULL, "safe_mode"), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#else -#define omap36xx_cbp_subset NULL -#endif - -/* - * Balls for 36XX CBP package - * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom) - */ -#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ - && defined (CONFIG_OMAP_PACKAGE_CBP) -static struct omap_ball __initdata omap36xx_cbp_ball[] = { - _OMAP3_BALLENTRY(CAM_D0, "ag17", NULL), - _OMAP3_BALLENTRY(CAM_D1, "ah17", NULL), - _OMAP3_BALLENTRY(CAM_D10, "b25", NULL), - _OMAP3_BALLENTRY(CAM_D11, "c26", NULL), - _OMAP3_BALLENTRY(CAM_D2, "b24", NULL), - _OMAP3_BALLENTRY(CAM_D3, "c24", NULL), - _OMAP3_BALLENTRY(CAM_D4, "d24", NULL), - _OMAP3_BALLENTRY(CAM_D5, "a25", NULL), - _OMAP3_BALLENTRY(CAM_D6, "k28", NULL), - _OMAP3_BALLENTRY(CAM_D7, "l28", NULL), - _OMAP3_BALLENTRY(CAM_D8, "k27", NULL), - _OMAP3_BALLENTRY(CAM_D9, "l27", NULL), - _OMAP3_BALLENTRY(CAM_FLD, "c23", NULL), - _OMAP3_BALLENTRY(CAM_HS, "a24", NULL), - _OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL), - _OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL), - _OMAP3_BALLENTRY(CAM_VS, "a23", NULL), - _OMAP3_BALLENTRY(CAM_WEN, "b23", NULL), - _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL), - _OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL), - _OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL), - _OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL), - _OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL), - _OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL), - _OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL), - _OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL), - _OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL), - _OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL), - _OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL), - _OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL), - _OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL), - _OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL), - _OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL), - _OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL), - _OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL), - _OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL), - _OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL), - _OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL), - _OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL), - _OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL), - _OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL), - _OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL), - _OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL), - _OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL), - _OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL), - _OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL), - _OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL), - _OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL), - _OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL), - _OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL), - _OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL), - _OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL), - _OMAP3_BALLENTRY(ETK_CLK, "af10", NULL), - _OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL), - _OMAP3_BALLENTRY(ETK_D0, "af11", NULL), - _OMAP3_BALLENTRY(ETK_D1, "ag12", NULL), - _OMAP3_BALLENTRY(ETK_D10, "ae7", NULL), - _OMAP3_BALLENTRY(ETK_D11, "af7", NULL), - _OMAP3_BALLENTRY(ETK_D12, "ag7", NULL), - _OMAP3_BALLENTRY(ETK_D13, "ah7", NULL), - _OMAP3_BALLENTRY(ETK_D14, "ag8", NULL), - _OMAP3_BALLENTRY(ETK_D15, "ah8", NULL), - _OMAP3_BALLENTRY(ETK_D2, "ah12", NULL), - _OMAP3_BALLENTRY(ETK_D3, "ae13", NULL), - _OMAP3_BALLENTRY(ETK_D4, "ae11", NULL), - _OMAP3_BALLENTRY(ETK_D5, "ah9", NULL), - _OMAP3_BALLENTRY(ETK_D6, "af13", NULL), - _OMAP3_BALLENTRY(ETK_D7, "ah14", NULL), - _OMAP3_BALLENTRY(ETK_D8, "af9", NULL), - _OMAP3_BALLENTRY(ETK_D9, "ag9", NULL), - _OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"), - _OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"), - _OMAP3_BALLENTRY(GPMC_A11, NULL, "ac20"), - _OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"), - _OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"), - _OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"), - _OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"), - _OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"), - _OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"), - _OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"), - _OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"), - _OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"), - _OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"), - _OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"), - _OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"), - _OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"), - _OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"), - _OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"), - _OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"), - _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"), - _OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL), - _OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"), - _OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL), - _OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL), - _OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL), - _OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL), - _OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL), - _OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL), - _OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"), - _OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"), - _OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL), - _OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL), - _OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL), - _OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL), - _OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL), - _OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL), - _OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL), - _OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL), - _OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL), - _OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL), - _OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL), - _OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL), - _OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL), - _OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL), - _OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL), - _OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL), - _OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL), - _OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL), - _OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL), - _OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL), - _OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL), - _OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL), - _OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL), - _OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL), - _OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL), - _OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL), - _OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL), - _OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL), - _OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL), - _OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL), - _OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL), - _OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL), - _OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL), - _OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL), - _OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL), - _OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL), - _OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL), - _OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL), - _OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL), - _OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL), - _OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL), - _OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL), - _OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL), - _OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL), - _OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL), - _OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL), - _OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL), - _OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL), - _OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL), - _OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL), - _OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL), - _OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL), - _OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL), - _OMAP3_BALLENTRY(SDRC_CKE0, "h16", "j22"), - _OMAP3_BALLENTRY(SDRC_CKE1, "h17", "j23"), - _OMAP3_BALLENTRY(SIM_CLK, "p26", NULL), - _OMAP3_BALLENTRY(SIM_IO, "p27", NULL), - _OMAP3_BALLENTRY(SIM_PWRCTRL, "r27", NULL), - _OMAP3_BALLENTRY(SIM_RST, "r25", NULL), - _OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL), - _OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL), - _OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL), - _OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL), - _OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL), - _OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL), - _OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL), - _OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL), - _OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL), - _OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL), - _OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL), - _OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL), - _OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL), - _OMAP3_BALLENTRY(UART1_CTS, "w8", NULL), - _OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL), - _OMAP3_BALLENTRY(UART1_RX, "y8", NULL), - _OMAP3_BALLENTRY(UART1_TX, "aa8", NULL), - _OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL), - _OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL), - _OMAP3_BALLENTRY(UART2_RX, "ad25", NULL), - _OMAP3_BALLENTRY(UART2_TX, "aa25", NULL), - _OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL), - _OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL), - _OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL), - _OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#else -#define omap36xx_cbp_ball NULL -#endif - -int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags) -{ - struct omap_mux *package_subset; - struct omap_ball *package_balls; - - switch (flags & OMAP_PACKAGE_MASK) { - case OMAP_PACKAGE_CBC: - package_subset = omap3_cbc_subset; - package_balls = omap3_cbc_ball; - break; - case OMAP_PACKAGE_CBB: - package_subset = omap3_cbb_subset; - package_balls = omap3_cbb_ball; - break; - case OMAP_PACKAGE_CUS: - package_subset = omap3_cus_subset; - package_balls = omap3_cus_ball; - break; - case OMAP_PACKAGE_CBP: - package_subset = omap36xx_cbp_subset; - package_balls = omap36xx_cbp_ball; - break; - default: - pr_err("%s Unknown omap package, mux disabled\n", __func__); - return -EINVAL; - } - - return omap_mux_init("core", OMAP_MUX_GPIO_IN_MODE4, - OMAP3_CONTROL_PADCONF_MUX_PBASE, - OMAP3_CONTROL_PADCONF_MUX_SIZE, - omap3_muxmodes, package_subset, board_subset, - package_balls); -} diff --git a/arch/arm/mach-omap2/mux34xx.h b/arch/arm/mach-omap2/mux34xx.h deleted file mode 100644 index 3f26d297c082..000000000000 --- a/arch/arm/mach-omap2/mux34xx.h +++ /dev/null @@ -1,402 +0,0 @@ -/* - * Copyright (C) 2009 Nokia - * Copyright (C) 2009 Texas Instruments - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define OMAP3_CONTROL_PADCONF_MUX_PBASE 0x48002030LU - -#define OMAP3_MUX(mode0, mux_value) \ -{ \ - .reg_offset = (OMAP3_CONTROL_PADCONF_##mode0##_OFFSET), \ - .value = (mux_value), \ -} - -/* - * OMAP3 CONTROL_PADCONF* register offsets for pin-muxing - * - * Extracted from the TRM. Add 0x48002030 to these values to get the - * absolute addresses. The name in the macro is the mode-0 name of - * the pin. NOTE: These registers are 16-bits wide. - * - * Note that 34XX TRM uses MMC instead of SDMMC and SAD2D instead - * of CHASSIS for some registers. For the defines, we follow the - * 36XX naming, and use SDMMC and CHASSIS. - */ -#define OMAP3_CONTROL_PADCONF_SDRC_D0_OFFSET 0x000 -#define OMAP3_CONTROL_PADCONF_SDRC_D1_OFFSET 0x002 -#define OMAP3_CONTROL_PADCONF_SDRC_D2_OFFSET 0x004 -#define OMAP3_CONTROL_PADCONF_SDRC_D3_OFFSET 0x006 -#define OMAP3_CONTROL_PADCONF_SDRC_D4_OFFSET 0x008 -#define OMAP3_CONTROL_PADCONF_SDRC_D5_OFFSET 0x00a -#define OMAP3_CONTROL_PADCONF_SDRC_D6_OFFSET 0x00c -#define OMAP3_CONTROL_PADCONF_SDRC_D7_OFFSET 0x00e -#define OMAP3_CONTROL_PADCONF_SDRC_D8_OFFSET 0x010 -#define OMAP3_CONTROL_PADCONF_SDRC_D9_OFFSET 0x012 -#define OMAP3_CONTROL_PADCONF_SDRC_D10_OFFSET 0x014 -#define OMAP3_CONTROL_PADCONF_SDRC_D11_OFFSET 0x016 -#define OMAP3_CONTROL_PADCONF_SDRC_D12_OFFSET 0x018 -#define OMAP3_CONTROL_PADCONF_SDRC_D13_OFFSET 0x01a -#define OMAP3_CONTROL_PADCONF_SDRC_D14_OFFSET 0x01c -#define OMAP3_CONTROL_PADCONF_SDRC_D15_OFFSET 0x01e -#define OMAP3_CONTROL_PADCONF_SDRC_D16_OFFSET 0x020 -#define OMAP3_CONTROL_PADCONF_SDRC_D17_OFFSET 0x022 -#define OMAP3_CONTROL_PADCONF_SDRC_D18_OFFSET 0x024 -#define OMAP3_CONTROL_PADCONF_SDRC_D19_OFFSET 0x026 -#define OMAP3_CONTROL_PADCONF_SDRC_D20_OFFSET 0x028 -#define OMAP3_CONTROL_PADCONF_SDRC_D21_OFFSET 0x02a -#define OMAP3_CONTROL_PADCONF_SDRC_D22_OFFSET 0x02c -#define OMAP3_CONTROL_PADCONF_SDRC_D23_OFFSET 0x02e -#define OMAP3_CONTROL_PADCONF_SDRC_D24_OFFSET 0x030 -#define OMAP3_CONTROL_PADCONF_SDRC_D25_OFFSET 0x032 -#define OMAP3_CONTROL_PADCONF_SDRC_D26_OFFSET 0x034 -#define OMAP3_CONTROL_PADCONF_SDRC_D27_OFFSET 0x036 -#define OMAP3_CONTROL_PADCONF_SDRC_D28_OFFSET 0x038 -#define OMAP3_CONTROL_PADCONF_SDRC_D29_OFFSET 0x03a -#define OMAP3_CONTROL_PADCONF_SDRC_D30_OFFSET 0x03c -#define OMAP3_CONTROL_PADCONF_SDRC_D31_OFFSET 0x03e -#define OMAP3_CONTROL_PADCONF_SDRC_CLK_OFFSET 0x040 -#define OMAP3_CONTROL_PADCONF_SDRC_DQS0_OFFSET 0x042 -#define OMAP3_CONTROL_PADCONF_SDRC_DQS1_OFFSET 0x044 -#define OMAP3_CONTROL_PADCONF_SDRC_DQS2_OFFSET 0x046 -#define OMAP3_CONTROL_PADCONF_SDRC_DQS3_OFFSET 0x048 -#define OMAP3_CONTROL_PADCONF_GPMC_A1_OFFSET 0x04a -#define OMAP3_CONTROL_PADCONF_GPMC_A2_OFFSET 0x04c -#define OMAP3_CONTROL_PADCONF_GPMC_A3_OFFSET 0x04e -#define OMAP3_CONTROL_PADCONF_GPMC_A4_OFFSET 0x050 -#define OMAP3_CONTROL_PADCONF_GPMC_A5_OFFSET 0x052 -#define OMAP3_CONTROL_PADCONF_GPMC_A6_OFFSET 0x054 -#define OMAP3_CONTROL_PADCONF_GPMC_A7_OFFSET 0x056 -#define OMAP3_CONTROL_PADCONF_GPMC_A8_OFFSET 0x058 -#define OMAP3_CONTROL_PADCONF_GPMC_A9_OFFSET 0x05a -#define OMAP3_CONTROL_PADCONF_GPMC_A10_OFFSET 0x05c -#define OMAP3_CONTROL_PADCONF_GPMC_D0_OFFSET 0x05e -#define OMAP3_CONTROL_PADCONF_GPMC_D1_OFFSET 0x060 -#define OMAP3_CONTROL_PADCONF_GPMC_D2_OFFSET 0x062 -#define OMAP3_CONTROL_PADCONF_GPMC_D3_OFFSET 0x064 -#define OMAP3_CONTROL_PADCONF_GPMC_D4_OFFSET 0x066 -#define OMAP3_CONTROL_PADCONF_GPMC_D5_OFFSET 0x068 -#define OMAP3_CONTROL_PADCONF_GPMC_D6_OFFSET 0x06a -#define OMAP3_CONTROL_PADCONF_GPMC_D7_OFFSET 0x06c -#define OMAP3_CONTROL_PADCONF_GPMC_D8_OFFSET 0x06e -#define OMAP3_CONTROL_PADCONF_GPMC_D9_OFFSET 0x070 -#define OMAP3_CONTROL_PADCONF_GPMC_D10_OFFSET 0x072 -#define OMAP3_CONTROL_PADCONF_GPMC_D11_OFFSET 0x074 -#define OMAP3_CONTROL_PADCONF_GPMC_D12_OFFSET 0x076 -#define OMAP3_CONTROL_PADCONF_GPMC_D13_OFFSET 0x078 -#define OMAP3_CONTROL_PADCONF_GPMC_D14_OFFSET 0x07a -#define OMAP3_CONTROL_PADCONF_GPMC_D15_OFFSET 0x07c -#define OMAP3_CONTROL_PADCONF_GPMC_NCS0_OFFSET 0x07e -#define OMAP3_CONTROL_PADCONF_GPMC_NCS1_OFFSET 0x080 -#define OMAP3_CONTROL_PADCONF_GPMC_NCS2_OFFSET 0x082 -#define OMAP3_CONTROL_PADCONF_GPMC_NCS3_OFFSET 0x084 -#define OMAP3_CONTROL_PADCONF_GPMC_NCS4_OFFSET 0x086 -#define OMAP3_CONTROL_PADCONF_GPMC_NCS5_OFFSET 0x088 -#define OMAP3_CONTROL_PADCONF_GPMC_NCS6_OFFSET 0x08a -#define OMAP3_CONTROL_PADCONF_GPMC_NCS7_OFFSET 0x08c -#define OMAP3_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x08e -#define OMAP3_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET 0x090 -#define OMAP3_CONTROL_PADCONF_GPMC_NOE_OFFSET 0x092 -#define OMAP3_CONTROL_PADCONF_GPMC_NWE_OFFSET 0x094 -#define OMAP3_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET 0x096 -#define OMAP3_CONTROL_PADCONF_GPMC_NBE1_OFFSET 0x098 -#define OMAP3_CONTROL_PADCONF_GPMC_NWP_OFFSET 0x09a -#define OMAP3_CONTROL_PADCONF_GPMC_WAIT0_OFFSET 0x09c -#define OMAP3_CONTROL_PADCONF_GPMC_WAIT1_OFFSET 0x09e -#define OMAP3_CONTROL_PADCONF_GPMC_WAIT2_OFFSET 0x0a0 -#define OMAP3_CONTROL_PADCONF_GPMC_WAIT3_OFFSET 0x0a2 -#define OMAP3_CONTROL_PADCONF_DSS_PCLK_OFFSET 0x0a4 -#define OMAP3_CONTROL_PADCONF_DSS_HSYNC_OFFSET 0x0a6 -#define OMAP3_CONTROL_PADCONF_DSS_VSYNC_OFFSET 0x0a8 -#define OMAP3_CONTROL_PADCONF_DSS_ACBIAS_OFFSET 0x0aa -#define OMAP3_CONTROL_PADCONF_DSS_DATA0_OFFSET 0x0ac -#define OMAP3_CONTROL_PADCONF_DSS_DATA1_OFFSET 0x0ae -#define OMAP3_CONTROL_PADCONF_DSS_DATA2_OFFSET 0x0b0 -#define OMAP3_CONTROL_PADCONF_DSS_DATA3_OFFSET 0x0b2 -#define OMAP3_CONTROL_PADCONF_DSS_DATA4_OFFSET 0x0b4 -#define OMAP3_CONTROL_PADCONF_DSS_DATA5_OFFSET 0x0b6 -#define OMAP3_CONTROL_PADCONF_DSS_DATA6_OFFSET 0x0b8 -#define OMAP3_CONTROL_PADCONF_DSS_DATA7_OFFSET 0x0ba -#define OMAP3_CONTROL_PADCONF_DSS_DATA8_OFFSET 0x0bc -#define OMAP3_CONTROL_PADCONF_DSS_DATA9_OFFSET 0x0be -#define OMAP3_CONTROL_PADCONF_DSS_DATA10_OFFSET 0x0c0 -#define OMAP3_CONTROL_PADCONF_DSS_DATA11_OFFSET 0x0c2 -#define OMAP3_CONTROL_PADCONF_DSS_DATA12_OFFSET 0x0c4 -#define OMAP3_CONTROL_PADCONF_DSS_DATA13_OFFSET 0x0c6 -#define OMAP3_CONTROL_PADCONF_DSS_DATA14_OFFSET 0x0c8 -#define OMAP3_CONTROL_PADCONF_DSS_DATA15_OFFSET 0x0ca -#define OMAP3_CONTROL_PADCONF_DSS_DATA16_OFFSET 0x0cc -#define OMAP3_CONTROL_PADCONF_DSS_DATA17_OFFSET 0x0ce -#define OMAP3_CONTROL_PADCONF_DSS_DATA18_OFFSET 0x0d0 -#define OMAP3_CONTROL_PADCONF_DSS_DATA19_OFFSET 0x0d2 -#define OMAP3_CONTROL_PADCONF_DSS_DATA20_OFFSET 0x0d4 -#define OMAP3_CONTROL_PADCONF_DSS_DATA21_OFFSET 0x0d6 -#define OMAP3_CONTROL_PADCONF_DSS_DATA22_OFFSET 0x0d8 -#define OMAP3_CONTROL_PADCONF_DSS_DATA23_OFFSET 0x0da -#define OMAP3_CONTROL_PADCONF_CAM_HS_OFFSET 0x0dc -#define OMAP3_CONTROL_PADCONF_CAM_VS_OFFSET 0x0de -#define OMAP3_CONTROL_PADCONF_CAM_XCLKA_OFFSET 0x0e0 -#define OMAP3_CONTROL_PADCONF_CAM_PCLK_OFFSET 0x0e2 -#define OMAP3_CONTROL_PADCONF_CAM_FLD_OFFSET 0x0e4 -#define OMAP3_CONTROL_PADCONF_CAM_D0_OFFSET 0x0e6 -#define OMAP3_CONTROL_PADCONF_CAM_D1_OFFSET 0x0e8 -#define OMAP3_CONTROL_PADCONF_CAM_D2_OFFSET 0x0ea -#define OMAP3_CONTROL_PADCONF_CAM_D3_OFFSET 0x0ec -#define OMAP3_CONTROL_PADCONF_CAM_D4_OFFSET 0x0ee -#define OMAP3_CONTROL_PADCONF_CAM_D5_OFFSET 0x0f0 -#define OMAP3_CONTROL_PADCONF_CAM_D6_OFFSET 0x0f2 -#define OMAP3_CONTROL_PADCONF_CAM_D7_OFFSET 0x0f4 -#define OMAP3_CONTROL_PADCONF_CAM_D8_OFFSET 0x0f6 -#define OMAP3_CONTROL_PADCONF_CAM_D9_OFFSET 0x0f8 -#define OMAP3_CONTROL_PADCONF_CAM_D10_OFFSET 0x0fa -#define OMAP3_CONTROL_PADCONF_CAM_D11_OFFSET 0x0fc -#define OMAP3_CONTROL_PADCONF_CAM_XCLKB_OFFSET 0x0fe -#define OMAP3_CONTROL_PADCONF_CAM_WEN_OFFSET 0x100 -#define OMAP3_CONTROL_PADCONF_CAM_STROBE_OFFSET 0x102 -#define OMAP3_CONTROL_PADCONF_CSI2_DX0_OFFSET 0x104 -#define OMAP3_CONTROL_PADCONF_CSI2_DY0_OFFSET 0x106 -#define OMAP3_CONTROL_PADCONF_CSI2_DX1_OFFSET 0x108 -#define OMAP3_CONTROL_PADCONF_CSI2_DY1_OFFSET 0x10a -#define OMAP3_CONTROL_PADCONF_MCBSP2_FSX_OFFSET 0x10c -#define OMAP3_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET 0x10e -#define OMAP3_CONTROL_PADCONF_MCBSP2_DR_OFFSET 0x110 -#define OMAP3_CONTROL_PADCONF_MCBSP2_DX_OFFSET 0x112 -#define OMAP3_CONTROL_PADCONF_SDMMC1_CLK_OFFSET 0x114 -#define OMAP3_CONTROL_PADCONF_SDMMC1_CMD_OFFSET 0x116 -#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET 0x118 -#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET 0x11a -#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET 0x11c -#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET 0x11e - -/* SDMMC1_DAT4 - DAT7 are SIM_IO SIM_CLK SIM_PWRCTRL and SIM_RST on 36xx */ -#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT4_OFFSET 0x120 -#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT5_OFFSET 0x122 -#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT6_OFFSET 0x124 -#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT7_OFFSET 0x126 - -#define OMAP3_CONTROL_PADCONF_SDMMC2_CLK_OFFSET 0x128 -#define OMAP3_CONTROL_PADCONF_SDMMC2_CMD_OFFSET 0x12a -#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET 0x12c -#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET 0x12e -#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET 0x130 -#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET 0x132 -#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT4_OFFSET 0x134 -#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT5_OFFSET 0x136 -#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT6_OFFSET 0x138 -#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT7_OFFSET 0x13a -#define OMAP3_CONTROL_PADCONF_MCBSP3_DX_OFFSET 0x13c -#define OMAP3_CONTROL_PADCONF_MCBSP3_DR_OFFSET 0x13e -#define OMAP3_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET 0x140 -#define OMAP3_CONTROL_PADCONF_MCBSP3_FSX_OFFSET 0x142 -#define OMAP3_CONTROL_PADCONF_UART2_CTS_OFFSET 0x144 -#define OMAP3_CONTROL_PADCONF_UART2_RTS_OFFSET 0x146 -#define OMAP3_CONTROL_PADCONF_UART2_TX_OFFSET 0x148 -#define OMAP3_CONTROL_PADCONF_UART2_RX_OFFSET 0x14a -#define OMAP3_CONTROL_PADCONF_UART1_TX_OFFSET 0x14c -#define OMAP3_CONTROL_PADCONF_UART1_RTS_OFFSET 0x14e -#define OMAP3_CONTROL_PADCONF_UART1_CTS_OFFSET 0x150 -#define OMAP3_CONTROL_PADCONF_UART1_RX_OFFSET 0x152 -#define OMAP3_CONTROL_PADCONF_MCBSP4_CLKX_OFFSET 0x154 -#define OMAP3_CONTROL_PADCONF_MCBSP4_DR_OFFSET 0x156 -#define OMAP3_CONTROL_PADCONF_MCBSP4_DX_OFFSET 0x158 -#define OMAP3_CONTROL_PADCONF_MCBSP4_FSX_OFFSET 0x15a -#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET 0x15c -#define OMAP3_CONTROL_PADCONF_MCBSP1_FSR_OFFSET 0x15e -#define OMAP3_CONTROL_PADCONF_MCBSP1_DX_OFFSET 0x160 -#define OMAP3_CONTROL_PADCONF_MCBSP1_DR_OFFSET 0x162 -#define OMAP3_CONTROL_PADCONF_MCBSP_CLKS_OFFSET 0x164 -#define OMAP3_CONTROL_PADCONF_MCBSP1_FSX_OFFSET 0x166 -#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET 0x168 -#define OMAP3_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET 0x16a -#define OMAP3_CONTROL_PADCONF_UART3_RTS_SD_OFFSET 0x16c -#define OMAP3_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET 0x16e -#define OMAP3_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET 0x170 -#define OMAP3_CONTROL_PADCONF_HSUSB0_CLK_OFFSET 0x172 -#define OMAP3_CONTROL_PADCONF_HSUSB0_STP_OFFSET 0x174 -#define OMAP3_CONTROL_PADCONF_HSUSB0_DIR_OFFSET 0x176 -#define OMAP3_CONTROL_PADCONF_HSUSB0_NXT_OFFSET 0x178 -#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA0_OFFSET 0x17a -#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA1_OFFSET 0x17c -#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA2_OFFSET 0x17e -#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA3_OFFSET 0x180 -#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA4_OFFSET 0x182 -#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA5_OFFSET 0x184 -#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA6_OFFSET 0x186 -#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA7_OFFSET 0x188 -#define OMAP3_CONTROL_PADCONF_I2C1_SCL_OFFSET 0x18a -#define OMAP3_CONTROL_PADCONF_I2C1_SDA_OFFSET 0x18c -#define OMAP3_CONTROL_PADCONF_I2C2_SCL_OFFSET 0x18e -#define OMAP3_CONTROL_PADCONF_I2C2_SDA_OFFSET 0x190 -#define OMAP3_CONTROL_PADCONF_I2C3_SCL_OFFSET 0x192 -#define OMAP3_CONTROL_PADCONF_I2C3_SDA_OFFSET 0x194 -#define OMAP3_CONTROL_PADCONF_HDQ_SIO_OFFSET 0x196 -#define OMAP3_CONTROL_PADCONF_MCSPI1_CLK_OFFSET 0x198 -#define OMAP3_CONTROL_PADCONF_MCSPI1_SIMO_OFFSET 0x19a -#define OMAP3_CONTROL_PADCONF_MCSPI1_SOMI_OFFSET 0x19c -#define OMAP3_CONTROL_PADCONF_MCSPI1_CS0_OFFSET 0x19e -#define OMAP3_CONTROL_PADCONF_MCSPI1_CS1_OFFSET 0x1a0 -#define OMAP3_CONTROL_PADCONF_MCSPI1_CS2_OFFSET 0x1a2 -#define OMAP3_CONTROL_PADCONF_MCSPI1_CS3_OFFSET 0x1a4 -#define OMAP3_CONTROL_PADCONF_MCSPI2_CLK_OFFSET 0x1a6 -#define OMAP3_CONTROL_PADCONF_MCSPI2_SIMO_OFFSET 0x1a8 -#define OMAP3_CONTROL_PADCONF_MCSPI2_SOMI_OFFSET 0x1aa -#define OMAP3_CONTROL_PADCONF_MCSPI2_CS0_OFFSET 0x1ac -#define OMAP3_CONTROL_PADCONF_MCSPI2_CS1_OFFSET 0x1ae -#define OMAP3_CONTROL_PADCONF_SYS_NIRQ_OFFSET 0x1b0 -#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT2_OFFSET 0x1b2 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD0_OFFSET 0x1b4 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD1_OFFSET 0x1b6 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD2_OFFSET 0x1b8 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD3_OFFSET 0x1ba -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD4_OFFSET 0x1bc -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD5_OFFSET 0x1be -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD6_OFFSET 0x1c0 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD7_OFFSET 0x1c2 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD8_OFFSET 0x1c4 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD9_OFFSET 0x1c6 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD10_OFFSET 0x1c8 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD11_OFFSET 0x1ca -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD12_OFFSET 0x1cc -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD13_OFFSET 0x1ce -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD14_OFFSET 0x1d0 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD15_OFFSET 0x1d2 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD16_OFFSET 0x1d4 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD17_OFFSET 0x1d6 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD18_OFFSET 0x1d8 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD19_OFFSET 0x1da -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD20_OFFSET 0x1dc -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD21_OFFSET 0x1de -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD22_OFFSET 0x1e0 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD23_OFFSET 0x1e2 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD24_OFFSET 0x1e4 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD25_OFFSET 0x1e6 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD26_OFFSET 0x1e8 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD27_OFFSET 0x1ea -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD28_OFFSET 0x1ec -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD29_OFFSET 0x1ee -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD30_OFFSET 0x1f0 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD31_OFFSET 0x1f2 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD32_OFFSET 0x1f4 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD33_OFFSET 0x1f6 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD34_OFFSET 0x1f8 -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD35_OFFSET 0x1fa -#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD36_OFFSET 0x1fc - -/* Note that 34xx TRM has SAD2D instead of CHASSIS for these */ -#define OMAP3_CONTROL_PADCONF_CHASSIS_CLK26MI_OFFSET 0x1fe -#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESPWRON_OFFSET 0x200 -#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESWARW_OFFSET 0x202 -#define OMAP3_CONTROL_PADCONF_CHASSIS_NIRQ_OFFSET 0x204 -#define OMAP3_CONTROL_PADCONF_CHASSIS_FIQ_OFFSET 0x206 -#define OMAP3_CONTROL_PADCONF_CHASSIS_ARMIRQ_OFFSET 0x208 -#define OMAP3_CONTROL_PADCONF_CHASSIS_IVAIRQ_OFFSET 0x20a -#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ0_OFFSET 0x20c -#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ1_OFFSET 0x20e -#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ2_OFFSET 0x210 -#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ3_OFFSET 0x212 -#define OMAP3_CONTROL_PADCONF_CHASSIS_NTRST_OFFSET 0x214 -#define OMAP3_CONTROL_PADCONF_CHASSIS_TDI_OFFSET 0x216 -#define OMAP3_CONTROL_PADCONF_CHASSIS_TDO_OFFSET 0x218 -#define OMAP3_CONTROL_PADCONF_CHASSIS_TMS_OFFSET 0x21a -#define OMAP3_CONTROL_PADCONF_CHASSIS_TCK_OFFSET 0x21c -#define OMAP3_CONTROL_PADCONF_CHASSIS_RTCK_OFFSET 0x21e -#define OMAP3_CONTROL_PADCONF_CHASSIS_MSTDBY_OFFSET 0x220 -#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEREQ_OFFSET 0x222 -#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEACK_OFFSET 0x224 - -#define OMAP3_CONTROL_PADCONF_SAD2D_MWRITE_OFFSET 0x226 -#define OMAP3_CONTROL_PADCONF_SAD2D_SWRITE_OFFSET 0x228 -#define OMAP3_CONTROL_PADCONF_SAD2D_MREAD_OFFSET 0x22a -#define OMAP3_CONTROL_PADCONF_SAD2D_SREAD_OFFSET 0x22c -#define OMAP3_CONTROL_PADCONF_SAD2D_MBUSFLAG_OFFSET 0x22e -#define OMAP3_CONTROL_PADCONF_SAD2D_SBUSFLAG_OFFSET 0x230 -#define OMAP3_CONTROL_PADCONF_SDRC_CKE0_OFFSET 0x232 -#define OMAP3_CONTROL_PADCONF_SDRC_CKE1_OFFSET 0x234 - -/* 36xx only */ -#define OMAP3_CONTROL_PADCONF_GPMC_A11_OFFSET 0x236 -#define OMAP3_CONTROL_PADCONF_SDRC_BA0_OFFSET 0x570 -#define OMAP3_CONTROL_PADCONF_SDRC_BA1_OFFSET 0x572 -#define OMAP3_CONTROL_PADCONF_SDRC_A0_OFFSET 0x574 -#define OMAP3_CONTROL_PADCONF_SDRC_A1_OFFSET 0x576 -#define OMAP3_CONTROL_PADCONF_SDRC_A2_OFFSET 0x578 -#define OMAP3_CONTROL_PADCONF_SDRC_A3_OFFSET 0x57a -#define OMAP3_CONTROL_PADCONF_SDRC_A4_OFFSET 0x57c -#define OMAP3_CONTROL_PADCONF_SDRC_A5_OFFSET 0x57e -#define OMAP3_CONTROL_PADCONF_SDRC_A6_OFFSET 0x580 -#define OMAP3_CONTROL_PADCONF_SDRC_A7_OFFSET 0x582 -#define OMAP3_CONTROL_PADCONF_SDRC_A8_OFFSET 0x584 -#define OMAP3_CONTROL_PADCONF_SDRC_A9_OFFSET 0x586 -#define OMAP3_CONTROL_PADCONF_SDRC_A10_OFFSET 0x588 -#define OMAP3_CONTROL_PADCONF_SDRC_A11_OFFSET 0x58a -#define OMAP3_CONTROL_PADCONF_SDRC_A12_OFFSET 0x58c -#define OMAP3_CONTROL_PADCONF_SDRC_A13_OFFSET 0x58e -#define OMAP3_CONTROL_PADCONF_SDRC_A14_OFFSET 0x590 -#define OMAP3_CONTROL_PADCONF_SDRC_NCS0_OFFSET 0x592 -#define OMAP3_CONTROL_PADCONF_SDRC_NCS1_OFFSET 0x594 -#define OMAP3_CONTROL_PADCONF_SDRC_NCLK_OFFSET 0x596 -#define OMAP3_CONTROL_PADCONF_SDRC_NRAS_OFFSET 0x598 -#define OMAP3_CONTROL_PADCONF_SDRC_NCAS_OFFSET 0x59a -#define OMAP3_CONTROL_PADCONF_SDRC_NWE_OFFSET 0x59c -#define OMAP3_CONTROL_PADCONF_SDRC_DM0_OFFSET 0x59e -#define OMAP3_CONTROL_PADCONF_SDRC_DM1_OFFSET 0x5a0 -#define OMAP3_CONTROL_PADCONF_SDRC_DM2_OFFSET 0x5a2 -#define OMAP3_CONTROL_PADCONF_SDRC_DM3_OFFSET 0x5a4 - -/* 36xx only, these are SDMMC1_DAT4 - DAT7 on 34xx */ -#define OMAP3_CONTROL_PADCONF_SIM_IO_OFFSET 0x120 -#define OMAP3_CONTROL_PADCONF_SIM_CLK_OFFSET 0x122 -#define OMAP3_CONTROL_PADCONF_SIM_PWRCTRL_OFFSET 0x124 -#define OMAP3_CONTROL_PADCONF_SIM_RST_OFFSET 0x126 - -#define OMAP3_CONTROL_PADCONF_ETK_CLK_OFFSET 0x5a8 -#define OMAP3_CONTROL_PADCONF_ETK_CTL_OFFSET 0x5aa -#define OMAP3_CONTROL_PADCONF_ETK_D0_OFFSET 0x5ac -#define OMAP3_CONTROL_PADCONF_ETK_D1_OFFSET 0x5ae -#define OMAP3_CONTROL_PADCONF_ETK_D2_OFFSET 0x5b0 -#define OMAP3_CONTROL_PADCONF_ETK_D3_OFFSET 0x5b2 -#define OMAP3_CONTROL_PADCONF_ETK_D4_OFFSET 0x5b4 -#define OMAP3_CONTROL_PADCONF_ETK_D5_OFFSET 0x5b6 -#define OMAP3_CONTROL_PADCONF_ETK_D6_OFFSET 0x5b8 -#define OMAP3_CONTROL_PADCONF_ETK_D7_OFFSET 0x5ba -#define OMAP3_CONTROL_PADCONF_ETK_D8_OFFSET 0x5bc -#define OMAP3_CONTROL_PADCONF_ETK_D9_OFFSET 0x5be -#define OMAP3_CONTROL_PADCONF_ETK_D10_OFFSET 0x5c0 -#define OMAP3_CONTROL_PADCONF_ETK_D11_OFFSET 0x5c2 -#define OMAP3_CONTROL_PADCONF_ETK_D12_OFFSET 0x5c4 -#define OMAP3_CONTROL_PADCONF_ETK_D13_OFFSET 0x5c6 -#define OMAP3_CONTROL_PADCONF_ETK_D14_OFFSET 0x5c8 -#define OMAP3_CONTROL_PADCONF_ETK_D15_OFFSET 0x5ca -#define OMAP3_CONTROL_PADCONF_I2C4_SCL_OFFSET 0x9d0 -#define OMAP3_CONTROL_PADCONF_I2C4_SDA_OFFSET 0x9d2 -#define OMAP3_CONTROL_PADCONF_SYS_32K_OFFSET 0x9d4 -#define OMAP3_CONTROL_PADCONF_SYS_CLKREQ_OFFSET 0x9d6 -#define OMAP3_CONTROL_PADCONF_SYS_NRESWARM_OFFSET 0x9d8 -#define OMAP3_CONTROL_PADCONF_SYS_BOOT0_OFFSET 0x9da -#define OMAP3_CONTROL_PADCONF_SYS_BOOT1_OFFSET 0x9dc -#define OMAP3_CONTROL_PADCONF_SYS_BOOT2_OFFSET 0x9de -#define OMAP3_CONTROL_PADCONF_SYS_BOOT3_OFFSET 0x9e0 -#define OMAP3_CONTROL_PADCONF_SYS_BOOT4_OFFSET 0x9e2 -#define OMAP3_CONTROL_PADCONF_SYS_BOOT5_OFFSET 0x9e4 -#define OMAP3_CONTROL_PADCONF_SYS_BOOT6_OFFSET 0x9e6 -#define OMAP3_CONTROL_PADCONF_SYS_OFF_MODE_OFFSET 0x9e8 -#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT1_OFFSET 0x9ea -#define OMAP3_CONTROL_PADCONF_JTAG_NTRST_OFFSET 0x9ec -#define OMAP3_CONTROL_PADCONF_JTAG_TCK_OFFSET 0x9ee -#define OMAP3_CONTROL_PADCONF_JTAG_TMS_TMSC_OFFSET 0x9f0 -#define OMAP3_CONTROL_PADCONF_JTAG_TDI_OFFSET 0x9f2 -#define OMAP3_CONTROL_PADCONF_JTAG_EMU0_OFFSET 0x9f4 -#define OMAP3_CONTROL_PADCONF_JTAG_EMU1_OFFSET 0x9f6 -#define OMAP3_CONTROL_PADCONF_SAD2D_SWAKEUP_OFFSET 0xa1c -#define OMAP3_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0xa1e -#define OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET 0xa20 -#define OMAP3_CONTROL_PADCONF_GPIO_127 0xa24 -#define OMAP3_CONTROL_PADCONF_GPIO_126 0xa26 -#define OMAP3_CONTROL_PADCONF_GPIO_128 0xa28 -#define OMAP3_CONTROL_PADCONF_GPIO_129 0xa2a - -#define OMAP3_CONTROL_PADCONF_MUX_SIZE \ - (OMAP3_CONTROL_PADCONF_GPIO_129 + 0x2) diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index ad982465efd0..7d62ad48c7c9 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -48,6 +48,7 @@ #include <asm/smp_scu.h> #include <asm/pgalloc.h> #include <asm/suspend.h> +#include <asm/virt.h> #include <asm/hardware/cache-l2x0.h> #include "soc.h" @@ -244,10 +245,9 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) save_state = 1; break; case PWRDM_POWER_RET: - if (IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE)) { + if (IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE)) save_state = 0; - break; - } + break; default: /* * CPUx CSWR is invalid hardware state. Also CPUx OSWR @@ -371,8 +371,12 @@ int __init omap4_mpuss_init(void) pm_info = &per_cpu(omap4_pm_info, 0x0); if (sar_base) { pm_info->scu_sar_addr = sar_base + SCU_OFFSET0; - pm_info->wkup_sar_addr = sar_base + - CPU0_WAKEUP_NS_PA_ADDR_OFFSET; + if (cpu_is_omap44xx()) + pm_info->wkup_sar_addr = sar_base + + CPU0_WAKEUP_NS_PA_ADDR_OFFSET; + else + pm_info->wkup_sar_addr = sar_base + + OMAP5_CPU0_WAKEUP_NS_PA_ADDR_OFFSET; pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0; } pm_info->pwrdm = pwrdm_lookup("cpu0_pwrdm"); @@ -391,8 +395,12 @@ int __init omap4_mpuss_init(void) pm_info = &per_cpu(omap4_pm_info, 0x1); if (sar_base) { pm_info->scu_sar_addr = sar_base + SCU_OFFSET1; - pm_info->wkup_sar_addr = sar_base + - CPU1_WAKEUP_NS_PA_ADDR_OFFSET; + if (cpu_is_omap44xx()) + pm_info->wkup_sar_addr = sar_base + + CPU1_WAKEUP_NS_PA_ADDR_OFFSET; + else + pm_info->wkup_sar_addr = sar_base + + OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET; pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1; } @@ -453,15 +461,24 @@ void __init omap4_mpuss_early_init(void) { unsigned long startup_pa; - if (!cpu_is_omap44xx()) + if (!(cpu_is_omap44xx() || soc_is_omap54xx())) return; sar_base = omap4_get_sar_ram_base(); if (cpu_is_omap443x()) startup_pa = virt_to_phys(omap4_secondary_startup); - else + else if (cpu_is_omap446x()) startup_pa = virt_to_phys(omap4460_secondary_startup); + else if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE) + startup_pa = virt_to_phys(omap5_secondary_hyp_startup); + else + startup_pa = virt_to_phys(omap5_secondary_startup); - writel_relaxed(startup_pa, sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET); + if (cpu_is_omap44xx()) + writel_relaxed(startup_pa, sar_base + + CPU1_WAKEUP_NS_PA_ADDR_OFFSET); + else + writel_relaxed(startup_pa, sar_base + + OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET); } diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h index 792b1069f724..5b2966a0f733 100644 --- a/arch/arm/mach-omap2/omap4-sar-layout.h +++ b/arch/arm/mach-omap2/omap4-sar-layout.h @@ -31,6 +31,8 @@ /* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */ #define CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xa04 #define CPU1_WAKEUP_NS_PA_ADDR_OFFSET 0xa08 +#define OMAP5_CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xe00 +#define OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET 0xe04 #define SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x500) #define SAR_SECURE_RAM_SIZE_OFFSET (SAR_BANK3_OFFSET + 0x504) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 1052b29697b8..759e1d45ba25 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -160,7 +160,6 @@ #include "prm44xx.h" #include "prm33xx.h" #include "prminst44xx.h" -#include "mux.h" #include "pm.h" /* Name of the OMAP hwmod for the MPU */ @@ -217,9 +216,6 @@ static LIST_HEAD(omap_hwmod_list); /* mpu_oh: used to add/remove MPU initiator from sleepdep list */ static struct omap_hwmod *mpu_oh; -/* io_chain_lock: used to serialize reconfigurations of the I/O chain */ -static DEFINE_SPINLOCK(io_chain_lock); - /* * linkspace: ptr to a buffer that struct omap_hwmod_link records are * allocated from - used to reduce the number of small memory @@ -594,51 +590,6 @@ static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle, } /** - * _set_idle_ioring_wakeup - enable/disable IO pad wakeup on hwmod idle for mux - * @oh: struct omap_hwmod * - * @set_wake: bool value indicating to set (true) or clear (false) wakeup enable - * - * Set or clear the I/O pad wakeup flag in the mux entries for the - * hwmod @oh. This function changes the @oh->mux->pads_dynamic array - * in memory. If the hwmod is currently idled, and the new idle - * values don't match the previous ones, this function will also - * update the SCM PADCTRL registers. Otherwise, if the hwmod is not - * currently idled, this function won't touch the hardware: the new - * mux settings are written to the SCM PADCTRL registers when the - * hwmod is idled. No return value. - */ -static void _set_idle_ioring_wakeup(struct omap_hwmod *oh, bool set_wake) -{ - struct omap_device_pad *pad; - bool change = false; - u16 prev_idle; - int j; - - if (!oh->mux || !oh->mux->enabled) - return; - - for (j = 0; j < oh->mux->nr_pads_dynamic; j++) { - pad = oh->mux->pads_dynamic[j]; - - if (!(pad->flags & OMAP_DEVICE_PAD_WAKEUP)) - continue; - - prev_idle = pad->idle; - - if (set_wake) - pad->idle |= OMAP_WAKEUP_EN; - else - pad->idle &= ~OMAP_WAKEUP_EN; - - if (prev_idle != pad->idle) - change = true; - } - - if (change && oh->_state == _HWMOD_STATE_IDLE) - omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE); -} - -/** * _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware * @oh: struct omap_hwmod * * @@ -2018,29 +1969,6 @@ static int _reset(struct omap_hwmod *oh) } /** - * _reconfigure_io_chain - clear any I/O chain wakeups and reconfigure chain - * - * Call the appropriate PRM function to clear any logged I/O chain - * wakeups and to reconfigure the chain. This apparently needs to be - * done upon every mux change. Since hwmods can be concurrently - * enabled and idled, hold a spinlock around the I/O chain - * reconfiguration sequence. No return value. - * - * XXX When the PRM code is moved to drivers, this function can be removed, - * as the PRM infrastructure should abstract this. - */ -static void _reconfigure_io_chain(void) -{ - unsigned long flags; - - spin_lock_irqsave(&io_chain_lock, flags); - - omap_prm_reconfigure_io_chain(); - - spin_unlock_irqrestore(&io_chain_lock, flags); -} - -/** * _omap4_update_context_lost - increment hwmod context loss counter if * hwmod context was lost, and clear hardware context loss reg * @oh: hwmod to check for context loss @@ -2109,18 +2037,9 @@ static int _enable(struct omap_hwmod *oh) /* * hwmods with HWMOD_INIT_NO_IDLE flag set are left in enabled - * state at init. Now that someone is really trying to enable - * them, just ensure that the hwmod mux is set. + * state at init. */ if (oh->_int_flags & _HWMOD_SKIP_ENABLE) { - /* - * If the caller has mux data populated, do the mux'ing - * which wouldn't have been done as part of the _enable() - * done during setup. - */ - if (oh->mux) - omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED); - oh->_int_flags &= ~_HWMOD_SKIP_ENABLE; return 0; } @@ -2145,16 +2064,6 @@ static int _enable(struct omap_hwmod *oh) if (_are_all_hardreset_lines_asserted(oh)) return 0; - /* Mux pins for device runtime if populated */ - if (oh->mux && (!oh->mux->enabled || - ((oh->_state == _HWMOD_STATE_IDLE) && - oh->mux->pads_dynamic))) { - omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED); - _reconfigure_io_chain(); - } else if (oh->flags & HWMOD_RECONFIG_IO_CHAIN) { - _reconfigure_io_chain(); - } - _add_initiator_dep(oh, mpu_oh); if (oh->clkdm) { @@ -2260,14 +2169,6 @@ static int _idle(struct omap_hwmod *oh) clkdm_hwmod_disable(oh->clkdm, oh); } - /* Mux pins for device idle if populated */ - if (oh->mux && oh->mux->pads_dynamic) { - omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE); - _reconfigure_io_chain(); - } else if (oh->flags & HWMOD_RECONFIG_IO_CHAIN) { - _reconfigure_io_chain(); - } - oh->_state = _HWMOD_STATE_IDLE; return 0; @@ -2334,10 +2235,6 @@ static int _shutdown(struct omap_hwmod *oh) for (i = 0; i < oh->rst_lines_cnt; i++) _assert_hardreset(oh, oh->rst_lines[i].name); - /* Mux pins to safe mode or use populated off mode values */ - if (oh->mux) - omap_hwmod_mux(oh->mux, _HWMOD_STATE_DISABLED); - oh->_state = _HWMOD_STATE_DISABLED; return 0; @@ -3729,7 +3626,6 @@ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh) _write_sysconfig(v, oh); } - _set_idle_ioring_wakeup(oh, true); spin_unlock_irqrestore(&oh->_lock, flags); return 0; @@ -3762,7 +3658,6 @@ int omap_hwmod_disable_wakeup(struct omap_hwmod *oh) _write_sysconfig(v, oh); } - _set_idle_ioring_wakeup(oh, false); spin_unlock_irqrestore(&oh->_lock, flags); return 0; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c index c1e98d589100..6d2e32462df9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c @@ -17,156 +17,11 @@ #include "omap_hwmod_common_data.h" -struct omap_hwmod_addr_space omap2430_mmc1_addr_space[] = { - { - .pa_start = 0x4809c000, - .pa_end = 0x4809c1ff, - .flags = ADDR_TYPE_RT, - }, - { } -}; - -struct omap_hwmod_addr_space omap2430_mmc2_addr_space[] = { - { - .pa_start = 0x480b4000, - .pa_end = 0x480b41ff, - .flags = ADDR_TYPE_RT, - }, - { } -}; - -struct omap_hwmod_addr_space omap2_i2c1_addr_space[] = { - { - .pa_start = 0x48070000, - .pa_end = 0x48070000 + SZ_128 - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - -struct omap_hwmod_addr_space omap2_i2c2_addr_space[] = { - { - .pa_start = 0x48072000, - .pa_end = 0x48072000 + SZ_128 - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - -struct omap_hwmod_addr_space omap2_dss_addrs[] = { - { - .pa_start = 0x48050000, - .pa_end = 0x48050000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -struct omap_hwmod_addr_space omap2_dss_dispc_addrs[] = { - { - .pa_start = 0x48050400, - .pa_end = 0x48050400 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -struct omap_hwmod_addr_space omap2_dss_rfbi_addrs[] = { - { - .pa_start = 0x48050800, - .pa_end = 0x48050800 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -struct omap_hwmod_addr_space omap2_dss_venc_addrs[] = { - { - .pa_start = 0x48050C00, - .pa_end = 0x48050C00 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -struct omap_hwmod_addr_space omap2_timer10_addrs[] = { - { - .pa_start = 0x48086000, - .pa_end = 0x48086000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -struct omap_hwmod_addr_space omap2_timer11_addrs[] = { - { - .pa_start = 0x48088000, - .pa_end = 0x48088000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -struct omap_hwmod_addr_space omap2xxx_timer12_addrs[] = { - { - .pa_start = 0x4808a000, - .pa_end = 0x4808a000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -struct omap_hwmod_addr_space omap2_mcspi1_addr_space[] = { - { - .pa_start = 0x48098000, - .pa_end = 0x48098000 + SZ_256 - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - -struct omap_hwmod_addr_space omap2_mcspi2_addr_space[] = { - { - .pa_start = 0x4809a000, - .pa_end = 0x4809a000 + SZ_256 - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - -struct omap_hwmod_addr_space omap2430_mcspi3_addr_space[] = { - { - .pa_start = 0x480b8000, - .pa_end = 0x480b8000 + SZ_256 - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - struct omap_hwmod_addr_space omap2_dma_system_addrs[] = { { .pa_start = 0x48056000, .pa_end = 0x48056000 + SZ_4K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -struct omap_hwmod_addr_space omap2_mcbsp1_addrs[] = { - { - .name = "mpu", - .pa_start = 0x48074000, - .pa_end = 0x480740ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -struct omap_hwmod_addr_space omap2_hdq1w_addr_space[] = { - { - .pa_start = 0x480b2000, - .pa_end = 0x480b2fff, - .flags = ADDR_TYPE_RT, + .flags = ADDR_TYPE_RT, }, - { } + { }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index c6c6384de867..cfaeb0f78cc8 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -45,204 +45,31 @@ struct omap_hwmod_class omap2_venc_hwmod_class = { .name = "venc", }; - -/* Common DMA request line data */ -struct omap_hwmod_dma_info omap2_uart1_sdma_reqs[] = { - { .name = "rx", .dma_req = 50, }, - { .name = "tx", .dma_req = 49, }, - { .dma_req = -1 } -}; - -struct omap_hwmod_dma_info omap2_uart2_sdma_reqs[] = { - { .name = "rx", .dma_req = 52, }, - { .name = "tx", .dma_req = 51, }, - { .dma_req = -1 } -}; - -struct omap_hwmod_dma_info omap2_uart3_sdma_reqs[] = { - { .name = "rx", .dma_req = 54, }, - { .name = "tx", .dma_req = 53, }, - { .dma_req = -1 } -}; - -struct omap_hwmod_dma_info omap2_i2c1_sdma_reqs[] = { - { .name = "tx", .dma_req = 27 }, - { .name = "rx", .dma_req = 28 }, - { .dma_req = -1 } -}; - -struct omap_hwmod_dma_info omap2_i2c2_sdma_reqs[] = { - { .name = "tx", .dma_req = 29 }, - { .name = "rx", .dma_req = 30 }, - { .dma_req = -1 } -}; - -struct omap_hwmod_dma_info omap2_mcspi1_sdma_reqs[] = { - { .name = "tx0", .dma_req = 35 }, /* DMA_SPI1_TX0 */ - { .name = "rx0", .dma_req = 36 }, /* DMA_SPI1_RX0 */ - { .name = "tx1", .dma_req = 37 }, /* DMA_SPI1_TX1 */ - { .name = "rx1", .dma_req = 38 }, /* DMA_SPI1_RX1 */ - { .name = "tx2", .dma_req = 39 }, /* DMA_SPI1_TX2 */ - { .name = "rx2", .dma_req = 40 }, /* DMA_SPI1_RX2 */ - { .name = "tx3", .dma_req = 41 }, /* DMA_SPI1_TX3 */ - { .name = "rx3", .dma_req = 42 }, /* DMA_SPI1_RX3 */ - { .dma_req = -1 } -}; - -struct omap_hwmod_dma_info omap2_mcspi2_sdma_reqs[] = { - { .name = "tx0", .dma_req = 43 }, /* DMA_SPI2_TX0 */ - { .name = "rx0", .dma_req = 44 }, /* DMA_SPI2_RX0 */ - { .name = "tx1", .dma_req = 45 }, /* DMA_SPI2_TX1 */ - { .name = "rx1", .dma_req = 46 }, /* DMA_SPI2_RX1 */ - { .dma_req = -1 } -}; - -struct omap_hwmod_dma_info omap2_mcbsp1_sdma_reqs[] = { - { .name = "rx", .dma_req = 32 }, - { .name = "tx", .dma_req = 31 }, - { .dma_req = -1 } -}; - -struct omap_hwmod_dma_info omap2_mcbsp2_sdma_reqs[] = { - { .name = "rx", .dma_req = 34 }, - { .name = "tx", .dma_req = 33 }, - { .dma_req = -1 } -}; - -struct omap_hwmod_dma_info omap2_mcbsp3_sdma_reqs[] = { - { .name = "rx", .dma_req = 18 }, - { .name = "tx", .dma_req = 17 }, - { .dma_req = -1 } -}; - -/* Other IP block data */ - - /* * omap_hwmod class data */ struct omap_hwmod_class l3_hwmod_class = { - .name = "l3" + .name = "l3", }; struct omap_hwmod_class l4_hwmod_class = { - .name = "l4" + .name = "l4", }; struct omap_hwmod_class mpu_hwmod_class = { - .name = "mpu" + .name = "mpu", }; struct omap_hwmod_class iva_hwmod_class = { - .name = "iva" + .name = "iva", }; /* Common MPU IRQ line data */ -struct omap_hwmod_irq_info omap2_timer1_mpu_irqs[] = { - { .irq = 37 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_timer2_mpu_irqs[] = { - { .irq = 38 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_timer3_mpu_irqs[] = { - { .irq = 39 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_timer4_mpu_irqs[] = { - { .irq = 40 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_timer5_mpu_irqs[] = { - { .irq = 41 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_timer6_mpu_irqs[] = { - { .irq = 42 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_timer7_mpu_irqs[] = { - { .irq = 43 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_timer8_mpu_irqs[] = { - { .irq = 44 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_timer9_mpu_irqs[] = { - { .irq = 45 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_timer10_mpu_irqs[] = { - { .irq = 46 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_timer11_mpu_irqs[] = { - { .irq = 47 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_uart1_mpu_irqs[] = { - { .irq = 72 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_uart2_mpu_irqs[] = { - { .irq = 73 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[] = { - { .irq = 74 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - struct omap_hwmod_irq_info omap2_dispc_irqs[] = { { .irq = 25 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[] = { - { .irq = 56 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[] = { - { .irq = 57 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_gpio1_irqs[] = { - { .irq = 29 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK1 */ - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_gpio2_irqs[] = { - { .irq = 30 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK2 */ - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_gpio3_irqs[] = { - { .irq = 31 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK3 */ - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_gpio4_irqs[] = { - { .irq = 32 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK4 */ - { .irq = -1 }, + { .irq = -1, }, }; struct omap_hwmod_irq_info omap2_dma_system_irqs[] = { @@ -250,17 +77,7 @@ struct omap_hwmod_irq_info omap2_dma_system_irqs[] = { { .name = "1", .irq = 13 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ1 */ { .name = "2", .irq = 14 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ2 */ { .name = "3", .irq = 15 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ3 */ - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[] = { - { .irq = 65 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - -struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[] = { - { .irq = 66 + OMAP_INTC_START, }, - { .irq = -1 }, + { .irq = -1, }, }; struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc = { @@ -277,9 +94,3 @@ struct omap_hwmod_class omap2_hdq1w_class = { .sysc = &omap2_hdq1w_sysc, .reset = &omap_hdq1w_reset, }; - -struct omap_hwmod_irq_info omap2_hdq1w_mpu_irqs[] = { - { .irq = 58 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c index 656861c29d5c..9b30b6b471ae 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c @@ -191,7 +191,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_dss_core_hwmod, .clk = "dss_ick", - .addr = omap2_dss_addrs, .fw = { .omap2 = { .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION, @@ -206,7 +205,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_dss_dispc_hwmod, .clk = "dss_ick", - .addr = omap2_dss_dispc_addrs, .fw = { .omap2 = { .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_DISPC_REGION, @@ -221,7 +219,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_dss_rfbi_hwmod, .clk = "dss_ick", - .addr = omap2_dss_rfbi_addrs, .fw = { .omap2 = { .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION, @@ -236,7 +233,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc = { .master = &omap2xxx_l4_core_hwmod, .slave = &omap2xxx_dss_venc_hwmod, .clk = "dss_ick", - .addr = omap2_dss_venc_addrs, .fw = { .omap2 = { .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_VENC_REGION, diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 36bcd2e75422..e047033caa3e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -569,7 +569,6 @@ struct omap_hwmod omap2xxx_dss_core_hwmod = { struct omap_hwmod omap2xxx_dss_dispc_hwmod = { .name = "dss_dispc", .class = &omap2_dispc_hwmod_class, - .mpu_irqs = omap2_dispc_irqs, .main_clk = "dss1_fck", .prcm = { .omap2 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h index d3e61d1a02d7..434bd1a77229 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h @@ -68,6 +68,7 @@ extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart6; extern struct omap_hwmod_ocp_if am33xx_l3_main__ocmc; extern struct omap_hwmod_ocp_if am33xx_l3_main__sha0; extern struct omap_hwmod_ocp_if am33xx_l3_main__aes0; +extern struct omap_hwmod_ocp_if am33xx_l4_per__rng; extern struct omap_hwmod am33xx_l3_main_hwmod; extern struct omap_hwmod am33xx_l3_s_hwmod; @@ -80,6 +81,7 @@ extern struct omap_hwmod am33xx_gfx_hwmod; extern struct omap_hwmod am33xx_prcm_hwmod; extern struct omap_hwmod am33xx_aes0_hwmod; extern struct omap_hwmod am33xx_sha0_hwmod; +extern struct omap_hwmod am33xx_rng_hwmod; extern struct omap_hwmod am33xx_ocmcram_hwmod; extern struct omap_hwmod am33xx_smartreflex0_hwmod; extern struct omap_hwmod am33xx_smartreflex1_hwmod; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c index 10dff2f0086a..8236e5c49ec3 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c @@ -547,3 +547,11 @@ struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = { .addr = am33xx_aes0_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; + +/* l4 per -> rng */ +struct omap_hwmod_ocp_if am33xx_l4_per__rng = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_rng_hwmod, + .clk = "rng_fck", + .user = OCP_USER_MPU, +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index e2d84aa7f595..de06a1d5ffab 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -268,6 +268,33 @@ struct omap_hwmod am33xx_sha0_hwmod = { }, }; +/* rng */ +static struct omap_hwmod_class_sysconfig am33xx_rng_sysc = { + .rev_offs = 0x1fe0, + .sysc_offs = 0x1fe4, + .sysc_flags = SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE, + .idlemodes = SIDLE_FORCE | SIDLE_NO, + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class am33xx_rng_hwmod_class = { + .name = "rng", + .sysc = &am33xx_rng_sysc, +}; + +struct omap_hwmod am33xx_rng_hwmod = { + .name = "rng", + .class = &am33xx_rng_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE, + .main_clk = "rng_fck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + /* ocmcram */ static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = { .name = "ocmcram", @@ -1315,6 +1342,7 @@ static void omap_hwmod_am33xx_clkctrl(void) CLKCTRL(am33xx_ocmcram_hwmod , AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET); CLKCTRL(am33xx_sha0_hwmod , AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET); CLKCTRL(am33xx_aes0_hwmod , AM33XX_CM_PER_AES0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_rng_hwmod, AM33XX_CM_PER_RNG_CLKCTRL_OFFSET); } static void omap_hwmod_am33xx_rst(void) @@ -1388,6 +1416,7 @@ static void omap_hwmod_am43xx_clkctrl(void) CLKCTRL(am33xx_ocmcram_hwmod , AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET); CLKCTRL(am33xx_sha0_hwmod , AM43XX_CM_PER_SHA0_CLKCTRL_OFFSET); CLKCTRL(am33xx_aes0_hwmod , AM43XX_CM_PER_AES0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_rng_hwmod, AM43XX_CM_PER_RNG_CLKCTRL_OFFSET); } static void omap_hwmod_am43xx_rst(void) diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index e1c2025d6d3e..6dc51a774a26 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -503,41 +503,6 @@ static struct omap_hwmod_ocp_if am33xx_l3_s__usbss = { .flags = OCPIF_SWSUP_IDLE, }; -/* rng */ -static struct omap_hwmod_class_sysconfig am33xx_rng_sysc = { - .rev_offs = 0x1fe0, - .sysc_offs = 0x1fe4, - .sysc_flags = SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE, - .idlemodes = SIDLE_FORCE | SIDLE_NO, - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am33xx_rng_hwmod_class = { - .name = "rng", - .sysc = &am33xx_rng_sysc, -}; - -static struct omap_hwmod am33xx_rng_hwmod = { - .name = "rng", - .class = &am33xx_rng_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_SWSUP_SIDLE, - .main_clk = "rng_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_RNG_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod_ocp_if am33xx_l4_per__rng = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_rng_hwmod, - .clk = "rng_fck", - .user = OCP_USER_MPU, -}; - static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l3_main__emif, &am33xx_mpu__l3_main, diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 1cc4a6f3954e..56f917ec8621 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -53,16 +53,10 @@ */ /* L3 */ -static struct omap_hwmod_irq_info omap3xxx_l3_main_irqs[] = { - { .irq = 9 + OMAP_INTC_START, }, - { .irq = 10 + OMAP_INTC_START, }, - { .irq = -1 }, -}; static struct omap_hwmod omap3xxx_l3_main_hwmod = { .name = "l3_main", .class = &l3_hwmod_class, - .mpu_irqs = omap3xxx_l3_main_irqs, .flags = HWMOD_NO_IDLEST, }; @@ -95,14 +89,9 @@ static struct omap_hwmod omap3xxx_l4_sec_hwmod = { }; /* MPU */ -static struct omap_hwmod_irq_info omap3xxx_mpu_irqs[] = { - { .name = "pmu", .irq = 3 + OMAP_INTC_START }, - { .irq = -1 } -}; static struct omap_hwmod omap3xxx_mpu_hwmod = { .name = "mpu", - .mpu_irqs = omap3xxx_mpu_irqs, .class = &mpu_hwmod_class, .main_clk = "arm_fck", }; @@ -128,7 +117,7 @@ static struct omap_hwmod omap3xxx_iva_hwmod = { .module_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT, - } + }, }, }; @@ -197,7 +186,6 @@ static struct omap_timer_capability_dev_attr capability_dsp_pwm_dev_attr = { /* timer1 */ static struct omap_hwmod omap3xxx_timer1_hwmod = { .name = "timer1", - .mpu_irqs = omap2_timer1_mpu_irqs, .main_clk = "gpt1_fck", .prcm = { .omap2 = { @@ -216,7 +204,6 @@ static struct omap_hwmod omap3xxx_timer1_hwmod = { /* timer2 */ static struct omap_hwmod omap3xxx_timer2_hwmod = { .name = "timer2", - .mpu_irqs = omap2_timer2_mpu_irqs, .main_clk = "gpt2_fck", .prcm = { .omap2 = { @@ -234,7 +221,6 @@ static struct omap_hwmod omap3xxx_timer2_hwmod = { /* timer3 */ static struct omap_hwmod omap3xxx_timer3_hwmod = { .name = "timer3", - .mpu_irqs = omap2_timer3_mpu_irqs, .main_clk = "gpt3_fck", .prcm = { .omap2 = { @@ -252,7 +238,6 @@ static struct omap_hwmod omap3xxx_timer3_hwmod = { /* timer4 */ static struct omap_hwmod omap3xxx_timer4_hwmod = { .name = "timer4", - .mpu_irqs = omap2_timer4_mpu_irqs, .main_clk = "gpt4_fck", .prcm = { .omap2 = { @@ -270,7 +255,6 @@ static struct omap_hwmod omap3xxx_timer4_hwmod = { /* timer5 */ static struct omap_hwmod omap3xxx_timer5_hwmod = { .name = "timer5", - .mpu_irqs = omap2_timer5_mpu_irqs, .main_clk = "gpt5_fck", .prcm = { .omap2 = { @@ -289,7 +273,6 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = { /* timer6 */ static struct omap_hwmod omap3xxx_timer6_hwmod = { .name = "timer6", - .mpu_irqs = omap2_timer6_mpu_irqs, .main_clk = "gpt6_fck", .prcm = { .omap2 = { @@ -308,7 +291,6 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = { /* timer7 */ static struct omap_hwmod omap3xxx_timer7_hwmod = { .name = "timer7", - .mpu_irqs = omap2_timer7_mpu_irqs, .main_clk = "gpt7_fck", .prcm = { .omap2 = { @@ -327,7 +309,6 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = { /* timer8 */ static struct omap_hwmod omap3xxx_timer8_hwmod = { .name = "timer8", - .mpu_irqs = omap2_timer8_mpu_irqs, .main_clk = "gpt8_fck", .prcm = { .omap2 = { @@ -346,7 +327,6 @@ static struct omap_hwmod omap3xxx_timer8_hwmod = { /* timer9 */ static struct omap_hwmod omap3xxx_timer9_hwmod = { .name = "timer9", - .mpu_irqs = omap2_timer9_mpu_irqs, .main_clk = "gpt9_fck", .prcm = { .omap2 = { @@ -365,7 +345,6 @@ static struct omap_hwmod omap3xxx_timer9_hwmod = { /* timer10 */ static struct omap_hwmod omap3xxx_timer10_hwmod = { .name = "timer10", - .mpu_irqs = omap2_timer10_mpu_irqs, .main_clk = "gpt10_fck", .prcm = { .omap2 = { @@ -384,7 +363,6 @@ static struct omap_hwmod omap3xxx_timer10_hwmod = { /* timer11 */ static struct omap_hwmod omap3xxx_timer11_hwmod = { .name = "timer11", - .mpu_irqs = omap2_timer11_mpu_irqs, .main_clk = "gpt11_fck", .prcm = { .omap2 = { @@ -401,14 +379,9 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = { }; /* timer12 */ -static struct omap_hwmod_irq_info omap3xxx_timer12_mpu_irqs[] = { - { .irq = 95 + OMAP_INTC_START, }, - { .irq = -1 }, -}; static struct omap_hwmod omap3xxx_timer12_hwmod = { .name = "timer12", - .mpu_irqs = omap3xxx_timer12_mpu_irqs, .main_clk = "gpt12_fck", .prcm = { .omap2 = { @@ -485,8 +458,6 @@ static struct omap_hwmod omap3xxx_wd_timer2_hwmod = { /* UART1 */ static struct omap_hwmod omap3xxx_uart1_hwmod = { .name = "uart1", - .mpu_irqs = omap2_uart1_mpu_irqs, - .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", .flags = DEBUG_TI81XXUART1_FLAGS | HWMOD_SWSUP_SIDLE, .prcm = { @@ -504,8 +475,6 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { /* UART2 */ static struct omap_hwmod omap3xxx_uart2_hwmod = { .name = "uart2", - .mpu_irqs = omap2_uart2_mpu_irqs, - .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", .flags = DEBUG_TI81XXUART2_FLAGS | HWMOD_SWSUP_SIDLE, .prcm = { @@ -523,8 +492,6 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { /* UART3 */ static struct omap_hwmod omap3xxx_uart3_hwmod = { .name = "uart3", - .mpu_irqs = omap2_uart3_mpu_irqs, - .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", .flags = DEBUG_OMAP3UART3_FLAGS | DEBUG_TI81XXUART3_FLAGS | HWMOD_SWSUP_SIDLE, @@ -541,21 +508,10 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { }; /* UART4 */ -static struct omap_hwmod_irq_info uart4_mpu_irqs[] = { - { .irq = 80 + OMAP_INTC_START, }, - { .irq = -1 }, -}; -static struct omap_hwmod_dma_info uart4_sdma_reqs[] = { - { .name = "rx", .dma_req = 82, }, - { .name = "tx", .dma_req = 81, }, - { .dma_req = -1 } -}; static struct omap_hwmod omap36xx_uart4_hwmod = { .name = "uart4", - .mpu_irqs = uart4_mpu_irqs, - .sdma_reqs = uart4_sdma_reqs, .main_clk = "uart4_fck", .flags = DEBUG_OMAP3UART4_FLAGS | HWMOD_SWSUP_SIDLE, .prcm = { @@ -570,16 +526,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { .class = &omap2_uart_class, }; -static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = { - { .irq = 84 + OMAP_INTC_START, }, - { .irq = -1 }, -}; -static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = { - { .name = "rx", .dma_req = 55, }, - { .name = "tx", .dma_req = 54, }, - { .dma_req = -1 } -}; /* * XXX AM35xx UART4 cannot complete its softreset without uart1_fck or @@ -597,8 +544,6 @@ static struct omap_hwmod_opt_clk am35xx_uart4_opt_clks[] = { static struct omap_hwmod am35xx_uart4_hwmod = { .name = "uart4", - .mpu_irqs = am35xx_uart4_mpu_irqs, - .sdma_reqs = am35xx_uart4_sdma_reqs, .main_clk = "uart4_fck", .prcm = { .omap2 = { @@ -625,7 +570,7 @@ static struct omap_hwmod_class i2c_class = { static struct omap_hwmod_dma_info omap3xxx_dss_sdma_chs[] = { { .name = "dispc", .dma_req = 5 }, { .name = "dsi1", .dma_req = 74 }, - { .dma_req = -1 } + { .dma_req = -1, }, }; /* dss */ @@ -714,7 +659,7 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { }, }, .flags = HWMOD_NO_IDLEST, - .dev_attr = &omap2_3_dss_dispc_dev_attr + .dev_attr = &omap2_3_dss_dispc_dev_attr, }; /* @@ -738,11 +683,6 @@ static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = { .sysc = &omap3xxx_dsi_sysc, }; -static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = { - { .irq = 25 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - /* dss_dsi1 */ static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = { { .role = "sys_clk", .clk = "dss2_alwon_fck" }, @@ -751,7 +691,6 @@ static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = { static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = { .name = "dss_dsi1", .class = &omap3xxx_dsi_hwmod_class, - .mpu_irqs = omap3xxx_dsi1_irqs, .main_clk = "dss1_alwon_fck", .prcm = { .omap2 = { @@ -815,8 +754,6 @@ static struct omap_i2c_dev_attr i2c1_dev_attr = { static struct omap_hwmod omap3xxx_i2c1_hwmod = { .name = "i2c1", .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .mpu_irqs = omap2_i2c1_mpu_irqs, - .sdma_reqs = omap2_i2c1_sdma_reqs, .main_clk = "i2c1_fck", .prcm = { .omap2 = { @@ -840,8 +777,6 @@ static struct omap_i2c_dev_attr i2c2_dev_attr = { static struct omap_hwmod omap3xxx_i2c2_hwmod = { .name = "i2c2", .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .mpu_irqs = omap2_i2c2_mpu_irqs, - .sdma_reqs = omap2_i2c2_sdma_reqs, .main_clk = "i2c2_fck", .prcm = { .omap2 = { @@ -862,22 +797,11 @@ static struct omap_i2c_dev_attr i2c3_dev_attr = { .flags = OMAP_I2C_FLAG_BUS_SHIFT_2, }; -static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = { - { .irq = 61 + OMAP_INTC_START, }, - { .irq = -1 }, -}; -static struct omap_hwmod_dma_info i2c3_sdma_reqs[] = { - { .name = "tx", .dma_req = 25 }, - { .name = "rx", .dma_req = 26 }, - { .dma_req = -1 } -}; static struct omap_hwmod omap3xxx_i2c3_hwmod = { .name = "i2c3", .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .mpu_irqs = i2c3_mpu_irqs, - .sdma_reqs = i2c3_sdma_reqs, .main_clk = "i2c3_fck", .prcm = { .omap2 = { @@ -928,7 +852,6 @@ static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { static struct omap_hwmod omap3xxx_gpio1_hwmod = { .name = "gpio1", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap2_gpio1_irqs, .main_clk = "gpio1_ick", .opt_clks = gpio1_opt_clks, .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks), @@ -953,7 +876,6 @@ static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { static struct omap_hwmod omap3xxx_gpio2_hwmod = { .name = "gpio2", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap2_gpio2_irqs, .main_clk = "gpio2_ick", .opt_clks = gpio2_opt_clks, .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks), @@ -978,7 +900,6 @@ static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { static struct omap_hwmod omap3xxx_gpio3_hwmod = { .name = "gpio3", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap2_gpio3_irqs, .main_clk = "gpio3_ick", .opt_clks = gpio3_opt_clks, .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks), @@ -1003,7 +924,6 @@ static struct omap_hwmod_opt_clk gpio4_opt_clks[] = { static struct omap_hwmod omap3xxx_gpio4_hwmod = { .name = "gpio4", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap2_gpio4_irqs, .main_clk = "gpio4_ick", .opt_clks = gpio4_opt_clks, .opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks), @@ -1021,10 +941,6 @@ static struct omap_hwmod omap3xxx_gpio4_hwmod = { }; /* gpio5 */ -static struct omap_hwmod_irq_info omap3xxx_gpio5_irqs[] = { - { .irq = 33 + OMAP_INTC_START, }, /* INT_34XX_GPIO_BANK5 */ - { .irq = -1 }, -}; static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { { .role = "dbclk", .clk = "gpio5_dbck", }, @@ -1033,7 +949,6 @@ static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { static struct omap_hwmod omap3xxx_gpio5_hwmod = { .name = "gpio5", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap3xxx_gpio5_irqs, .main_clk = "gpio5_ick", .opt_clks = gpio5_opt_clks, .opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks), @@ -1051,10 +966,6 @@ static struct omap_hwmod omap3xxx_gpio5_hwmod = { }; /* gpio6 */ -static struct omap_hwmod_irq_info omap3xxx_gpio6_irqs[] = { - { .irq = 34 + OMAP_INTC_START, }, /* INT_34XX_GPIO_BANK6 */ - { .irq = -1 }, -}; static struct omap_hwmod_opt_clk gpio6_opt_clks[] = { { .role = "dbclk", .clk = "gpio6_dbck", }, @@ -1063,7 +974,6 @@ static struct omap_hwmod_opt_clk gpio6_opt_clks[] = { static struct omap_hwmod omap3xxx_gpio6_hwmod = { .name = "gpio6", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap3xxx_gpio6_irqs, .main_clk = "gpio6_ick", .opt_clks = gpio6_opt_clks, .opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks), @@ -1156,18 +1066,10 @@ static struct omap_hwmod_opt_clk mcbsp234_opt_clks[] = { }; /* mcbsp1 */ -static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = { - { .name = "common", .irq = 16 + OMAP_INTC_START, }, - { .name = "tx", .irq = 59 + OMAP_INTC_START, }, - { .name = "rx", .irq = 60 + OMAP_INTC_START, }, - { .irq = -1 }, -}; static struct omap_hwmod omap3xxx_mcbsp1_hwmod = { .name = "mcbsp1", .class = &omap3xxx_mcbsp_hwmod_class, - .mpu_irqs = omap3xxx_mcbsp1_irqs, - .sdma_reqs = omap2_mcbsp1_sdma_reqs, .main_clk = "mcbsp1_fck", .prcm = { .omap2 = { @@ -1183,12 +1085,6 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = { }; /* mcbsp2 */ -static struct omap_hwmod_irq_info omap3xxx_mcbsp2_irqs[] = { - { .name = "common", .irq = 17 + OMAP_INTC_START, }, - { .name = "tx", .irq = 62 + OMAP_INTC_START, }, - { .name = "rx", .irq = 63 + OMAP_INTC_START, }, - { .irq = -1 }, -}; static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = { .sidetone = "mcbsp2_sidetone", @@ -1197,8 +1093,6 @@ static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = { static struct omap_hwmod omap3xxx_mcbsp2_hwmod = { .name = "mcbsp2", .class = &omap3xxx_mcbsp_hwmod_class, - .mpu_irqs = omap3xxx_mcbsp2_irqs, - .sdma_reqs = omap2_mcbsp2_sdma_reqs, .main_clk = "mcbsp2_fck", .prcm = { .omap2 = { @@ -1215,12 +1109,6 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = { }; /* mcbsp3 */ -static struct omap_hwmod_irq_info omap3xxx_mcbsp3_irqs[] = { - { .name = "common", .irq = 22 + OMAP_INTC_START, }, - { .name = "tx", .irq = 89 + OMAP_INTC_START, }, - { .name = "rx", .irq = 90 + OMAP_INTC_START, }, - { .irq = -1 }, -}; static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = { .sidetone = "mcbsp3_sidetone", @@ -1229,8 +1117,6 @@ static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = { static struct omap_hwmod omap3xxx_mcbsp3_hwmod = { .name = "mcbsp3", .class = &omap3xxx_mcbsp_hwmod_class, - .mpu_irqs = omap3xxx_mcbsp3_irqs, - .sdma_reqs = omap2_mcbsp3_sdma_reqs, .main_clk = "mcbsp3_fck", .prcm = { .omap2 = { @@ -1247,24 +1133,11 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = { }; /* mcbsp4 */ -static struct omap_hwmod_irq_info omap3xxx_mcbsp4_irqs[] = { - { .name = "common", .irq = 23 + OMAP_INTC_START, }, - { .name = "tx", .irq = 54 + OMAP_INTC_START, }, - { .name = "rx", .irq = 55 + OMAP_INTC_START, }, - { .irq = -1 }, -}; -static struct omap_hwmod_dma_info omap3xxx_mcbsp4_sdma_chs[] = { - { .name = "rx", .dma_req = 20 }, - { .name = "tx", .dma_req = 19 }, - { .dma_req = -1 } -}; static struct omap_hwmod omap3xxx_mcbsp4_hwmod = { .name = "mcbsp4", .class = &omap3xxx_mcbsp_hwmod_class, - .mpu_irqs = omap3xxx_mcbsp4_irqs, - .sdma_reqs = omap3xxx_mcbsp4_sdma_chs, .main_clk = "mcbsp4_fck", .prcm = { .omap2 = { @@ -1280,24 +1153,11 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = { }; /* mcbsp5 */ -static struct omap_hwmod_irq_info omap3xxx_mcbsp5_irqs[] = { - { .name = "common", .irq = 27 + OMAP_INTC_START, }, - { .name = "tx", .irq = 81 + OMAP_INTC_START, }, - { .name = "rx", .irq = 82 + OMAP_INTC_START, }, - { .irq = -1 }, -}; -static struct omap_hwmod_dma_info omap3xxx_mcbsp5_sdma_chs[] = { - { .name = "rx", .dma_req = 22 }, - { .name = "tx", .dma_req = 21 }, - { .dma_req = -1 } -}; static struct omap_hwmod omap3xxx_mcbsp5_hwmod = { .name = "mcbsp5", .class = &omap3xxx_mcbsp_hwmod_class, - .mpu_irqs = omap3xxx_mcbsp5_irqs, - .sdma_reqs = omap3xxx_mcbsp5_sdma_chs, .main_clk = "mcbsp5_fck", .prcm = { .omap2 = { @@ -1325,29 +1185,19 @@ static struct omap_hwmod_class omap3xxx_mcbsp_sidetone_hwmod_class = { }; /* mcbsp2_sidetone */ -static struct omap_hwmod_irq_info omap3xxx_mcbsp2_sidetone_irqs[] = { - { .name = "irq", .irq = 4 + OMAP_INTC_START, }, - { .irq = -1 }, -}; static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = { .name = "mcbsp2_sidetone", .class = &omap3xxx_mcbsp_sidetone_hwmod_class, - .mpu_irqs = omap3xxx_mcbsp2_sidetone_irqs, .main_clk = "mcbsp2_ick", .flags = HWMOD_NO_IDLEST, }; /* mcbsp3_sidetone */ -static struct omap_hwmod_irq_info omap3xxx_mcbsp3_sidetone_irqs[] = { - { .name = "irq", .irq = 5 + OMAP_INTC_START, }, - { .irq = -1 }, -}; static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = { .name = "mcbsp3_sidetone", .class = &omap3xxx_mcbsp_sidetone_hwmod_class, - .mpu_irqs = omap3xxx_mcbsp3_sidetone_irqs, .main_clk = "mcbsp3_ick", .flags = HWMOD_NO_IDLEST, }; @@ -1394,10 +1244,6 @@ static struct omap_smartreflex_dev_attr sr1_dev_attr = { .sensor_voltdm_name = "mpu_iva", }; -static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = { - { .irq = 18 + OMAP_INTC_START, }, - { .irq = -1 }, -}; static struct omap_hwmod omap34xx_sr1_hwmod = { .name = "smartreflex_mpu_iva", @@ -1413,7 +1259,6 @@ static struct omap_hwmod omap34xx_sr1_hwmod = { }, }, .dev_attr = &sr1_dev_attr, - .mpu_irqs = omap3_smartreflex_mpu_irqs, .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; @@ -1431,7 +1276,6 @@ static struct omap_hwmod omap36xx_sr1_hwmod = { }, }, .dev_attr = &sr1_dev_attr, - .mpu_irqs = omap3_smartreflex_mpu_irqs, }; /* SR2 */ @@ -1439,10 +1283,6 @@ static struct omap_smartreflex_dev_attr sr2_dev_attr = { .sensor_voltdm_name = "core", }; -static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = { - { .irq = 19 + OMAP_INTC_START, }, - { .irq = -1 }, -}; static struct omap_hwmod omap34xx_sr2_hwmod = { .name = "smartreflex_core", @@ -1458,7 +1298,6 @@ static struct omap_hwmod omap34xx_sr2_hwmod = { }, }, .dev_attr = &sr2_dev_attr, - .mpu_irqs = omap3_smartreflex_core_irqs, .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; @@ -1476,7 +1315,6 @@ static struct omap_hwmod omap36xx_sr2_hwmod = { }, }, .dev_attr = &sr2_dev_attr, - .mpu_irqs = omap3_smartreflex_core_irqs, }; /* @@ -1545,8 +1383,6 @@ static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = { static struct omap_hwmod omap34xx_mcspi1 = { .name = "mcspi1", - .mpu_irqs = omap2_mcspi1_mpu_irqs, - .sdma_reqs = omap2_mcspi1_sdma_reqs, .main_clk = "mcspi1_fck", .prcm = { .omap2 = { @@ -1568,8 +1404,6 @@ static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = { static struct omap_hwmod omap34xx_mcspi2 = { .name = "mcspi2", - .mpu_irqs = omap2_mcspi2_mpu_irqs, - .sdma_reqs = omap2_mcspi2_sdma_reqs, .main_clk = "mcspi2_fck", .prcm = { .omap2 = { @@ -1585,18 +1419,7 @@ static struct omap_hwmod omap34xx_mcspi2 = { }; /* mcspi3 */ -static struct omap_hwmod_irq_info omap34xx_mcspi3_mpu_irqs[] = { - { .name = "irq", .irq = 91 + OMAP_INTC_START, }, /* 91 */ - { .irq = -1 }, -}; -static struct omap_hwmod_dma_info omap34xx_mcspi3_sdma_reqs[] = { - { .name = "tx0", .dma_req = 15 }, - { .name = "rx0", .dma_req = 16 }, - { .name = "tx1", .dma_req = 23 }, - { .name = "rx1", .dma_req = 24 }, - { .dma_req = -1 } -}; static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = { .num_chipselect = 2, @@ -1604,8 +1427,6 @@ static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = { static struct omap_hwmod omap34xx_mcspi3 = { .name = "mcspi3", - .mpu_irqs = omap34xx_mcspi3_mpu_irqs, - .sdma_reqs = omap34xx_mcspi3_sdma_reqs, .main_clk = "mcspi3_fck", .prcm = { .omap2 = { @@ -1621,16 +1442,7 @@ static struct omap_hwmod omap34xx_mcspi3 = { }; /* mcspi4 */ -static struct omap_hwmod_irq_info omap34xx_mcspi4_mpu_irqs[] = { - { .name = "irq", .irq = 48 + OMAP_INTC_START, }, - { .irq = -1 }, -}; -static struct omap_hwmod_dma_info omap34xx_mcspi4_sdma_reqs[] = { - { .name = "tx0", .dma_req = 70 }, /* DMA_SPI4_TX0 */ - { .name = "rx0", .dma_req = 71 }, /* DMA_SPI4_RX0 */ - { .dma_req = -1 } -}; static struct omap2_mcspi_dev_attr omap_mcspi4_dev_attr = { .num_chipselect = 1, @@ -1638,8 +1450,6 @@ static struct omap2_mcspi_dev_attr omap_mcspi4_dev_attr = { static struct omap_hwmod omap34xx_mcspi4 = { .name = "mcspi4", - .mpu_irqs = omap34xx_mcspi4_mpu_irqs, - .sdma_reqs = omap34xx_mcspi4_sdma_reqs, .main_clk = "mcspi4_fck", .prcm = { .omap2 = { @@ -1673,16 +1483,9 @@ static struct omap_hwmod_class usbotg_class = { }; /* usb_otg_hs */ -static struct omap_hwmod_irq_info omap3xxx_usbhsotg_mpu_irqs[] = { - - { .name = "mc", .irq = 92 + OMAP_INTC_START, }, - { .name = "dma", .irq = 93 + OMAP_INTC_START, }, - { .irq = -1 }, -}; static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { .name = "usb_otg_hs", - .mpu_irqs = omap3xxx_usbhsotg_mpu_irqs, .main_clk = "hsotgusb_ick", .prcm = { .omap2 = { @@ -1691,7 +1494,7 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { .module_offs = CORE_MOD, .idlest_reg_id = 1, .idlest_idle_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT, - .idlest_stdby_bit = OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT + .idlest_stdby_bit = OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT, }, }, .class = &usbotg_class, @@ -1711,10 +1514,6 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { }; /* usb_otg_hs */ -static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = { - { .name = "mc", .irq = 71 + OMAP_INTC_START, }, - { .irq = -1 }, -}; static struct omap_hwmod_class am35xx_usbotg_class = { .name = "am35xx_usbotg", @@ -1722,7 +1521,6 @@ static struct omap_hwmod_class am35xx_usbotg_class = { static struct omap_hwmod am35xx_usbhsotg_hwmod = { .name = "am35x_otg_hs", - .mpu_irqs = am35xx_usbhsotg_mpu_irqs, .main_clk = "hsotgusb_fck", .class = &am35xx_usbotg_class, .flags = HWMOD_NO_IDLEST, @@ -1747,16 +1545,7 @@ static struct omap_hwmod_class omap34xx_mmc_class = { /* MMC/SD/SDIO1 */ -static struct omap_hwmod_irq_info omap34xx_mmc1_mpu_irqs[] = { - { .irq = 83 + OMAP_INTC_START, }, - { .irq = -1 }, -}; -static struct omap_hwmod_dma_info omap34xx_mmc1_sdma_reqs[] = { - { .name = "tx", .dma_req = 61, }, - { .name = "rx", .dma_req = 62, }, - { .dma_req = -1 } -}; static struct omap_hwmod_opt_clk omap34xx_mmc1_opt_clks[] = { { .role = "dbck", .clk = "omap_32k_fck", }, @@ -1774,8 +1563,6 @@ static struct omap_hsmmc_dev_attr mmc1_pre_es3_dev_attr = { static struct omap_hwmod omap3xxx_pre_es3_mmc1_hwmod = { .name = "mmc1", - .mpu_irqs = omap34xx_mmc1_mpu_irqs, - .sdma_reqs = omap34xx_mmc1_sdma_reqs, .opt_clks = omap34xx_mmc1_opt_clks, .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc1_opt_clks), .main_clk = "mmchs1_fck", @@ -1794,8 +1581,6 @@ static struct omap_hwmod omap3xxx_pre_es3_mmc1_hwmod = { static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = { .name = "mmc1", - .mpu_irqs = omap34xx_mmc1_mpu_irqs, - .sdma_reqs = omap34xx_mmc1_sdma_reqs, .opt_clks = omap34xx_mmc1_opt_clks, .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc1_opt_clks), .main_clk = "mmchs1_fck", @@ -1814,16 +1599,7 @@ static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = { /* MMC/SD/SDIO2 */ -static struct omap_hwmod_irq_info omap34xx_mmc2_mpu_irqs[] = { - { .irq = 86 + OMAP_INTC_START, }, - { .irq = -1 }, -}; -static struct omap_hwmod_dma_info omap34xx_mmc2_sdma_reqs[] = { - { .name = "tx", .dma_req = 47, }, - { .name = "rx", .dma_req = 48, }, - { .dma_req = -1 } -}; static struct omap_hwmod_opt_clk omap34xx_mmc2_opt_clks[] = { { .role = "dbck", .clk = "omap_32k_fck", }, @@ -1836,8 +1612,6 @@ static struct omap_hsmmc_dev_attr mmc2_pre_es3_dev_attr = { static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = { .name = "mmc2", - .mpu_irqs = omap34xx_mmc2_mpu_irqs, - .sdma_reqs = omap34xx_mmc2_sdma_reqs, .opt_clks = omap34xx_mmc2_opt_clks, .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc2_opt_clks), .main_clk = "mmchs2_fck", @@ -1856,8 +1630,6 @@ static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = { static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = { .name = "mmc2", - .mpu_irqs = omap34xx_mmc2_mpu_irqs, - .sdma_reqs = omap34xx_mmc2_sdma_reqs, .opt_clks = omap34xx_mmc2_opt_clks, .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc2_opt_clks), .main_clk = "mmchs2_fck", @@ -1875,16 +1647,7 @@ static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = { /* MMC/SD/SDIO3 */ -static struct omap_hwmod_irq_info omap34xx_mmc3_mpu_irqs[] = { - { .irq = 94 + OMAP_INTC_START, }, - { .irq = -1 }, -}; -static struct omap_hwmod_dma_info omap34xx_mmc3_sdma_reqs[] = { - { .name = "tx", .dma_req = 77, }, - { .name = "rx", .dma_req = 78, }, - { .dma_req = -1 } -}; static struct omap_hwmod_opt_clk omap34xx_mmc3_opt_clks[] = { { .role = "dbck", .clk = "omap_32k_fck", }, @@ -1892,8 +1655,6 @@ static struct omap_hwmod_opt_clk omap34xx_mmc3_opt_clks[] = { static struct omap_hwmod omap3xxx_mmc3_hwmod = { .name = "mmc3", - .mpu_irqs = omap34xx_mmc3_mpu_irqs, - .sdma_reqs = omap34xx_mmc3_sdma_reqs, .opt_clks = omap34xx_mmc3_opt_clks, .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc3_opt_clks), .main_clk = "mmchs3_fck", @@ -1931,17 +1692,11 @@ static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = { .sysc = &omap3xxx_usb_host_hs_sysc, }; -static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = { - { .name = "ohci-irq", .irq = 76 + OMAP_INTC_START, }, - { .name = "ehci-irq", .irq = 77 + OMAP_INTC_START, }, - { .irq = -1 }, -}; static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = { .name = "usb_host_hs", .class = &omap3xxx_usb_host_hs_hwmod_class, .clkdm_name = "usbhost_clkdm", - .mpu_irqs = omap3xxx_usb_host_hs_irqs, .main_clk = "usbhost_48m_fck", .prcm = { .omap2 = { @@ -2015,16 +1770,11 @@ static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = { .sysc = &omap3xxx_usb_tll_hs_sysc, }; -static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = { - { .name = "tll-irq", .irq = 78 + OMAP_INTC_START, }, - { .irq = -1 }, -}; static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = { .name = "usb_tll_hs", .class = &omap3xxx_usb_tll_hs_hwmod_class, .clkdm_name = "core_l4_clkdm", - .mpu_irqs = omap3xxx_usb_tll_hs_irqs, .main_clk = "usbtll_fck", .prcm = { .omap2 = { @@ -2039,7 +1789,6 @@ static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = { static struct omap_hwmod omap3xxx_hdq1w_hwmod = { .name = "hdq1w", - .mpu_irqs = omap2_hdq1w_mpu_irqs, .main_clk = "hdq_fck", .prcm = { .omap2 = { @@ -2134,16 +1883,10 @@ static struct omap_hwmod_class omap3xxx_gpmc_hwmod_class = { .sysc = &omap3xxx_gpmc_sysc, }; -static struct omap_hwmod_irq_info omap3xxx_gpmc_irqs[] = { - { .irq = 20 + OMAP_INTC_START, }, - { .irq = -1 } -}; - static struct omap_hwmod omap3xxx_gpmc_hwmod = { .name = "gpmc", .class = &omap3xxx_gpmc_hwmod_class, .clkdm_name = "core_l3_clkdm", - .mpu_irqs = omap3xxx_gpmc_irqs, .main_clk = "gpmc_fck", /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */ .flags = HWMOD_NO_IDLEST | DEBUG_OMAP_GPMC_HWMOD_FLAGS, @@ -2167,37 +1910,19 @@ static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_per = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap3xxx_l3_main_addrs[] = { - { - .pa_start = 0x68000000, - .pa_end = 0x6800ffff, - .flags = ADDR_TYPE_RT, - }, - { } -}; /* MPU -> L3 interface */ static struct omap_hwmod_ocp_if omap3xxx_mpu__l3_main = { .master = &omap3xxx_mpu_hwmod, .slave = &omap3xxx_l3_main_hwmod, - .addr = omap3xxx_l3_main_addrs, .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space omap3xxx_l4_emu_addrs[] = { - { - .pa_start = 0x54000000, - .pa_end = 0x547fffff, - .flags = ADDR_TYPE_RT, - }, - { } -}; /* l3 -> debugss */ static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_debugss = { .master = &omap3xxx_l3_main_hwmod, .slave = &omap3xxx_debugss_hwmod, - .addr = omap3xxx_l4_emu_addrs, .user = OCP_USER_MPU, }; @@ -2215,7 +1940,7 @@ static struct omap_hwmod_ocp_if omap3xxx_dss__l3 = { .omap2 = { .l3_perm_bit = OMAP3_L3_CORE_FW_INIT_ID_DSS, .flags = OMAP_FIREWALL_L3, - } + }, }, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2256,18 +1981,16 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__pre_es3_mmc1 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_pre_es3_mmc1_hwmod, .clk = "mmchs1_ick", - .addr = omap2430_mmc1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, - .flags = OMAP_FIREWALL_L4 + .flags = OMAP_FIREWALL_L4, }; static struct omap_hwmod_ocp_if omap3xxx_l4_core__es3plus_mmc1 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_es3plus_mmc1_hwmod, .clk = "mmchs1_ick", - .addr = omap2430_mmc1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, - .flags = OMAP_FIREWALL_L4 + .flags = OMAP_FIREWALL_L4, }; /* L4 CORE -> MMC2 interface */ @@ -2275,126 +1998,70 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__pre_es3_mmc2 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_pre_es3_mmc2_hwmod, .clk = "mmchs2_ick", - .addr = omap2430_mmc2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, - .flags = OMAP_FIREWALL_L4 + .flags = OMAP_FIREWALL_L4, }; static struct omap_hwmod_ocp_if omap3xxx_l4_core__es3plus_mmc2 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_es3plus_mmc2_hwmod, .clk = "mmchs2_ick", - .addr = omap2430_mmc2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, - .flags = OMAP_FIREWALL_L4 + .flags = OMAP_FIREWALL_L4, }; /* L4 CORE -> MMC3 interface */ -static struct omap_hwmod_addr_space omap3xxx_mmc3_addr_space[] = { - { - .pa_start = 0x480ad000, - .pa_end = 0x480ad1ff, - .flags = ADDR_TYPE_RT, - }, - { } -}; static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc3 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_mmc3_hwmod, .clk = "mmchs3_ick", - .addr = omap3xxx_mmc3_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, - .flags = OMAP_FIREWALL_L4 + .flags = OMAP_FIREWALL_L4, }; /* L4 CORE -> UART1 interface */ -static struct omap_hwmod_addr_space omap3xxx_uart1_addr_space[] = { - { - .pa_start = OMAP3_UART1_BASE, - .pa_end = OMAP3_UART1_BASE + SZ_8K - 1, - .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, - }, - { } -}; static struct omap_hwmod_ocp_if omap3_l4_core__uart1 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_uart1_hwmod, .clk = "uart1_ick", - .addr = omap3xxx_uart1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* L4 CORE -> UART2 interface */ -static struct omap_hwmod_addr_space omap3xxx_uart2_addr_space[] = { - { - .pa_start = OMAP3_UART2_BASE, - .pa_end = OMAP3_UART2_BASE + SZ_1K - 1, - .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, - }, - { } -}; static struct omap_hwmod_ocp_if omap3_l4_core__uart2 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_uart2_hwmod, .clk = "uart2_ick", - .addr = omap3xxx_uart2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* L4 PER -> UART3 interface */ -static struct omap_hwmod_addr_space omap3xxx_uart3_addr_space[] = { - { - .pa_start = OMAP3_UART3_BASE, - .pa_end = OMAP3_UART3_BASE + SZ_1K - 1, - .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, - }, - { } -}; static struct omap_hwmod_ocp_if omap3_l4_per__uart3 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_uart3_hwmod, .clk = "uart3_ick", - .addr = omap3xxx_uart3_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* L4 PER -> UART4 interface */ -static struct omap_hwmod_addr_space omap36xx_uart4_addr_space[] = { - { - .pa_start = OMAP3_UART4_BASE, - .pa_end = OMAP3_UART4_BASE + SZ_1K - 1, - .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, - }, - { } -}; static struct omap_hwmod_ocp_if omap36xx_l4_per__uart4 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap36xx_uart4_hwmod, .clk = "uart4_ick", - .addr = omap36xx_uart4_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* AM35xx: L4 CORE -> UART4 interface */ -static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = { - { - .pa_start = OMAP3_UART4_AM35XX_BASE, - .pa_end = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1, - .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, - }, - { } -}; static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = { .master = &omap3xxx_l4_core_hwmod, .slave = &am35xx_uart4_hwmod, .clk = "uart4_ick", - .addr = am35xx_uart4_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2403,13 +2070,12 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_i2c1_hwmod, .clk = "i2c1_ick", - .addr = omap2_i2c1_addr_space, .fw = { .omap2 = { .l4_fw_region = OMAP3_L4_CORE_FW_I2C1_REGION, .l4_prot_group = 7, .flags = OMAP_FIREWALL_L4, - } + }, }, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2419,57 +2085,38 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c2 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_i2c2_hwmod, .clk = "i2c2_ick", - .addr = omap2_i2c2_addr_space, .fw = { .omap2 = { .l4_fw_region = OMAP3_L4_CORE_FW_I2C2_REGION, .l4_prot_group = 7, .flags = OMAP_FIREWALL_L4, - } + }, }, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* L4 CORE -> I2C3 interface */ -static struct omap_hwmod_addr_space omap3xxx_i2c3_addr_space[] = { - { - .pa_start = 0x48060000, - .pa_end = 0x48060000 + SZ_128 - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_i2c3_hwmod, .clk = "i2c3_ick", - .addr = omap3xxx_i2c3_addr_space, .fw = { .omap2 = { .l4_fw_region = OMAP3_L4_CORE_FW_I2C3_REGION, .l4_prot_group = 7, .flags = OMAP_FIREWALL_L4, - } + }, }, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* L4 CORE -> SR1 interface */ -static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = { - { - .pa_start = OMAP34XX_SR1_BASE, - .pa_end = OMAP34XX_SR1_BASE + SZ_1K - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; static struct omap_hwmod_ocp_if omap34xx_l4_core__sr1 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap34xx_sr1_hwmod, .clk = "sr_l4_ick", - .addr = omap3_sr1_addr_space, .user = OCP_USER_MPU, }; @@ -2477,25 +2124,15 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr1 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap36xx_sr1_hwmod, .clk = "sr_l4_ick", - .addr = omap3_sr1_addr_space, .user = OCP_USER_MPU, }; /* L4 CORE -> SR1 interface */ -static struct omap_hwmod_addr_space omap3_sr2_addr_space[] = { - { - .pa_start = OMAP34XX_SR2_BASE, - .pa_end = OMAP34XX_SR2_BASE + SZ_1K - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; static struct omap_hwmod_ocp_if omap34xx_l4_core__sr2 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap34xx_sr2_hwmod, .clk = "sr_l4_ick", - .addr = omap3_sr2_addr_space, .user = OCP_USER_MPU, }; @@ -2503,43 +2140,24 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr2 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap36xx_sr2_hwmod, .clk = "sr_l4_ick", - .addr = omap3_sr2_addr_space, .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space omap3xxx_usbhsotg_addrs[] = { - { - .pa_start = OMAP34XX_HSUSB_OTG_BASE, - .pa_end = OMAP34XX_HSUSB_OTG_BASE + SZ_4K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; /* l4_core -> usbhsotg */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__usbhsotg = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_usbhsotg_hwmod, .clk = "l4_ick", - .addr = omap3xxx_usbhsotg_addrs, .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space am35xx_usbhsotg_addrs[] = { - { - .pa_start = AM35XX_IPSS_USBOTGSS_BASE, - .pa_end = AM35XX_IPSS_USBOTGSS_BASE + SZ_4K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; /* l4_core -> usbhsotg */ static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = { .master = &omap3xxx_l4_core_hwmod, .slave = &am35xx_usbhsotg_hwmod, .clk = "hsotgusb_ick", - .addr = am35xx_usbhsotg_addrs, .user = OCP_USER_MPU, }; @@ -2558,165 +2176,84 @@ static struct omap_hwmod_ocp_if omap3xxx_l3__iva = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap3xxx_timer1_addrs[] = { - { - .pa_start = 0x48318000, - .pa_end = 0x48318000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; /* l4_wkup -> timer1 */ static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__timer1 = { .master = &omap3xxx_l4_wkup_hwmod, .slave = &omap3xxx_timer1_hwmod, .clk = "gpt1_ick", - .addr = omap3xxx_timer1_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap3xxx_timer2_addrs[] = { - { - .pa_start = 0x49032000, - .pa_end = 0x49032000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; /* l4_per -> timer2 */ static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer2 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_timer2_hwmod, .clk = "gpt2_ick", - .addr = omap3xxx_timer2_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap3xxx_timer3_addrs[] = { - { - .pa_start = 0x49034000, - .pa_end = 0x49034000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; /* l4_per -> timer3 */ static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer3 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_timer3_hwmod, .clk = "gpt3_ick", - .addr = omap3xxx_timer3_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap3xxx_timer4_addrs[] = { - { - .pa_start = 0x49036000, - .pa_end = 0x49036000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; /* l4_per -> timer4 */ static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer4 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_timer4_hwmod, .clk = "gpt4_ick", - .addr = omap3xxx_timer4_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap3xxx_timer5_addrs[] = { - { - .pa_start = 0x49038000, - .pa_end = 0x49038000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; /* l4_per -> timer5 */ static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer5 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_timer5_hwmod, .clk = "gpt5_ick", - .addr = omap3xxx_timer5_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap3xxx_timer6_addrs[] = { - { - .pa_start = 0x4903A000, - .pa_end = 0x4903A000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; /* l4_per -> timer6 */ static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer6 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_timer6_hwmod, .clk = "gpt6_ick", - .addr = omap3xxx_timer6_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap3xxx_timer7_addrs[] = { - { - .pa_start = 0x4903C000, - .pa_end = 0x4903C000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; /* l4_per -> timer7 */ static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer7 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_timer7_hwmod, .clk = "gpt7_ick", - .addr = omap3xxx_timer7_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap3xxx_timer8_addrs[] = { - { - .pa_start = 0x4903E000, - .pa_end = 0x4903E000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; /* l4_per -> timer8 */ static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer8 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_timer8_hwmod, .clk = "gpt8_ick", - .addr = omap3xxx_timer8_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap3xxx_timer9_addrs[] = { - { - .pa_start = 0x49040000, - .pa_end = 0x49040000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; /* l4_per -> timer9 */ static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer9 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_timer9_hwmod, .clk = "gpt9_ick", - .addr = omap3xxx_timer9_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2725,7 +2262,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer10 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_timer10_hwmod, .clk = "gpt10_ick", - .addr = omap2_timer10_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2734,43 +2270,24 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer11 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_timer11_hwmod, .clk = "gpt11_ick", - .addr = omap2_timer11_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap3xxx_timer12_addrs[] = { - { - .pa_start = 0x48304000, - .pa_end = 0x48304000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; /* l4_core -> timer12 */ static struct omap_hwmod_ocp_if omap3xxx_l4_sec__timer12 = { .master = &omap3xxx_l4_sec_hwmod, .slave = &omap3xxx_timer12_hwmod, .clk = "gpt12_ick", - .addr = omap3xxx_timer12_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_wkup -> wd_timer2 */ -static struct omap_hwmod_addr_space omap3xxx_wd_timer2_addrs[] = { - { - .pa_start = 0x48314000, - .pa_end = 0x4831407f, - .flags = ADDR_TYPE_RT - }, - { } -}; static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__wd_timer2 = { .master = &omap3xxx_l4_wkup_hwmod, .slave = &omap3xxx_wd_timer2_hwmod, .clk = "wdt2_ick", - .addr = omap3xxx_wd_timer2_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2779,13 +2296,12 @@ static struct omap_hwmod_ocp_if omap3430es1_l4_core__dss = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3430es1_dss_core_hwmod, .clk = "dss_ick", - .addr = omap2_dss_addrs, .fw = { .omap2 = { .l4_fw_region = OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION, .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, .flags = OMAP_FIREWALL_L4, - } + }, }, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2794,13 +2310,12 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_dss_core_hwmod, .clk = "dss_ick", - .addr = omap2_dss_addrs, .fw = { .omap2 = { .l4_fw_region = OMAP3_L4_CORE_FW_DSS_CORE_REGION, .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, .flags = OMAP_FIREWALL_L4, - } + }, }, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2810,38 +2325,27 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_dss_dispc_hwmod, .clk = "dss_ick", - .addr = omap2_dss_dispc_addrs, .fw = { .omap2 = { .l4_fw_region = OMAP3_L4_CORE_FW_DSS_DISPC_REGION, .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, .flags = OMAP_FIREWALL_L4, - } + }, }, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = { - { - .pa_start = 0x4804FC00, - .pa_end = 0x4804FFFF, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_core -> dss_dsi1 */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_dss_dsi1_hwmod, .clk = "dss_ick", - .addr = omap3xxx_dss_dsi1_addrs, .fw = { .omap2 = { .l4_fw_region = OMAP3_L4_CORE_FW_DSS_DSI_REGION, .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, .flags = OMAP_FIREWALL_L4, - } + }, }, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2851,13 +2355,12 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_rfbi = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_dss_rfbi_hwmod, .clk = "dss_ick", - .addr = omap2_dss_rfbi_addrs, .fw = { .omap2 = { .l4_fw_region = OMAP3_L4_CORE_FW_DSS_RFBI_REGION, .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP , .flags = OMAP_FIREWALL_L4, - } + }, }, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2867,66 +2370,38 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_dss_venc_hwmod, .clk = "dss_ick", - .addr = omap2_dss_venc_addrs, .fw = { .omap2 = { .l4_fw_region = OMAP3_L4_CORE_FW_DSS_VENC_REGION, .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, .flags = OMAP_FIREWALL_L4, - } + }, }, .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_wkup -> gpio1 */ -static struct omap_hwmod_addr_space omap3xxx_gpio1_addrs[] = { - { - .pa_start = 0x48310000, - .pa_end = 0x483101ff, - .flags = ADDR_TYPE_RT - }, - { } -}; static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__gpio1 = { .master = &omap3xxx_l4_wkup_hwmod, .slave = &omap3xxx_gpio1_hwmod, - .addr = omap3xxx_gpio1_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_per -> gpio2 */ -static struct omap_hwmod_addr_space omap3xxx_gpio2_addrs[] = { - { - .pa_start = 0x49050000, - .pa_end = 0x490501ff, - .flags = ADDR_TYPE_RT - }, - { } -}; static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio2 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_gpio2_hwmod, - .addr = omap3xxx_gpio2_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_per -> gpio3 */ -static struct omap_hwmod_addr_space omap3xxx_gpio3_addrs[] = { - { - .pa_start = 0x49052000, - .pa_end = 0x490521ff, - .flags = ADDR_TYPE_RT - }, - { } -}; static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio3 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_gpio3_hwmod, - .addr = omap3xxx_gpio3_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3002,53 +2477,26 @@ static struct omap_hwmod omap3xxx_mmu_iva_hwmod = { }; /* l4_per -> gpio4 */ -static struct omap_hwmod_addr_space omap3xxx_gpio4_addrs[] = { - { - .pa_start = 0x49054000, - .pa_end = 0x490541ff, - .flags = ADDR_TYPE_RT - }, - { } -}; static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio4 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_gpio4_hwmod, - .addr = omap3xxx_gpio4_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_per -> gpio5 */ -static struct omap_hwmod_addr_space omap3xxx_gpio5_addrs[] = { - { - .pa_start = 0x49056000, - .pa_end = 0x490561ff, - .flags = ADDR_TYPE_RT - }, - { } -}; static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio5 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_gpio5_hwmod, - .addr = omap3xxx_gpio5_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_per -> gpio6 */ -static struct omap_hwmod_addr_space omap3xxx_gpio6_addrs[] = { - { - .pa_start = 0x49058000, - .pa_end = 0x490581ff, - .flags = ADDR_TYPE_RT - }, - { } -}; static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio6 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_gpio6_hwmod, - .addr = omap3xxx_gpio6_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3064,9 +2512,9 @@ static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = { { .pa_start = 0x48056000, .pa_end = 0x48056fff, - .flags = ADDR_TYPE_RT + .flags = ADDR_TYPE_RT, }, - { } + { }, }; /* l4_cfg -> dma_system */ @@ -3078,136 +2526,66 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dma_system = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap3xxx_mcbsp1_addrs[] = { - { - .name = "mpu", - .pa_start = 0x48074000, - .pa_end = 0x480740ff, - .flags = ADDR_TYPE_RT - }, - { } -}; /* l4_core -> mcbsp1 */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp1 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_mcbsp1_hwmod, .clk = "mcbsp1_ick", - .addr = omap3xxx_mcbsp1_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap3xxx_mcbsp2_addrs[] = { - { - .name = "mpu", - .pa_start = 0x49022000, - .pa_end = 0x490220ff, - .flags = ADDR_TYPE_RT - }, - { } -}; /* l4_per -> mcbsp2 */ static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_mcbsp2_hwmod, .clk = "mcbsp2_ick", - .addr = omap3xxx_mcbsp2_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap3xxx_mcbsp3_addrs[] = { - { - .name = "mpu", - .pa_start = 0x49024000, - .pa_end = 0x490240ff, - .flags = ADDR_TYPE_RT - }, - { } -}; /* l4_per -> mcbsp3 */ static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_mcbsp3_hwmod, .clk = "mcbsp3_ick", - .addr = omap3xxx_mcbsp3_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap3xxx_mcbsp4_addrs[] = { - { - .name = "mpu", - .pa_start = 0x49026000, - .pa_end = 0x490260ff, - .flags = ADDR_TYPE_RT - }, - { } -}; /* l4_per -> mcbsp4 */ static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp4 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_mcbsp4_hwmod, .clk = "mcbsp4_ick", - .addr = omap3xxx_mcbsp4_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap3xxx_mcbsp5_addrs[] = { - { - .name = "mpu", - .pa_start = 0x48096000, - .pa_end = 0x480960ff, - .flags = ADDR_TYPE_RT - }, - { } -}; /* l4_core -> mcbsp5 */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp5 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_mcbsp5_hwmod, .clk = "mcbsp5_ick", - .addr = omap3xxx_mcbsp5_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap3xxx_mcbsp2_sidetone_addrs[] = { - { - .name = "sidetone", - .pa_start = 0x49028000, - .pa_end = 0x490280ff, - .flags = ADDR_TYPE_RT - }, - { } -}; /* l4_per -> mcbsp2_sidetone */ static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2_sidetone = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_mcbsp2_sidetone_hwmod, .clk = "mcbsp2_ick", - .addr = omap3xxx_mcbsp2_sidetone_addrs, .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space omap3xxx_mcbsp3_sidetone_addrs[] = { - { - .name = "sidetone", - .pa_start = 0x4902A000, - .pa_end = 0x4902A0ff, - .flags = ADDR_TYPE_RT - }, - { } -}; /* l4_per -> mcbsp3_sidetone */ static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3_sidetone = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_mcbsp3_sidetone_hwmod, .clk = "mcbsp3_ick", - .addr = omap3xxx_mcbsp3_sidetone_addrs, .user = OCP_USER_MPU, }; @@ -3223,7 +2601,6 @@ static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi1 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap34xx_mcspi1, .clk = "mcspi1_ick", - .addr = omap2_mcspi1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3232,7 +2609,6 @@ static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi2 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap34xx_mcspi2, .clk = "mcspi2_ick", - .addr = omap2_mcspi2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3241,25 +2617,15 @@ static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi3 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap34xx_mcspi3, .clk = "mcspi3_ick", - .addr = omap2430_mcspi3_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4 core -> mcspi4 interface */ -static struct omap_hwmod_addr_space omap34xx_mcspi4_addr_space[] = { - { - .pa_start = 0x480ba000, - .pa_end = 0x480ba0ff, - .flags = ADDR_TYPE_RT, - }, - { } -}; static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi4 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap34xx_mcspi4, .clk = "mcspi4_ick", - .addr = omap34xx_mcspi4_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3270,49 +2636,19 @@ static struct omap_hwmod_ocp_if omap3xxx_usb_host_hs__l3_main_2 = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space omap3xxx_usb_host_hs_addrs[] = { - { - .name = "uhh", - .pa_start = 0x48064000, - .pa_end = 0x480643ff, - .flags = ADDR_TYPE_RT - }, - { - .name = "ohci", - .pa_start = 0x48064400, - .pa_end = 0x480647ff, - }, - { - .name = "ehci", - .pa_start = 0x48064800, - .pa_end = 0x48064cff, - }, - {} -}; static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_host_hs = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_usb_host_hs_hwmod, .clk = "usbhost_ick", - .addr = omap3xxx_usb_host_hs_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap3xxx_usb_tll_hs_addrs[] = { - { - .name = "tll", - .pa_start = 0x48062000, - .pa_end = 0x48062fff, - .flags = ADDR_TYPE_RT - }, - {} -}; static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_tll_hs = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_usb_tll_hs_hwmod, .clk = "usbtll_ick", - .addr = omap3xxx_usb_tll_hs_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3321,35 +2657,17 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__hdq1w = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_hdq1w_hwmod, .clk = "hdq_ick", - .addr = omap2_hdq1w_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, .flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE, }; /* l4_wkup -> 32ksync_counter */ -static struct omap_hwmod_addr_space omap3xxx_counter_32k_addrs[] = { - { - .pa_start = 0x48320000, - .pa_end = 0x4832001f, - .flags = ADDR_TYPE_RT - }, - { } -}; -static struct omap_hwmod_addr_space omap3xxx_gpmc_addrs[] = { - { - .pa_start = 0x6e000000, - .pa_end = 0x6e000fff, - .flags = ADDR_TYPE_RT - }, - { } -}; static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__counter_32k = { .master = &omap3xxx_l4_wkup_hwmod, .slave = &omap3xxx_counter_32k_hwmod, .clk = "omap_32ksync_ick", - .addr = omap3xxx_counter_32k_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3434,7 +2752,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l3_main__gpmc = { .master = &omap3xxx_l3_main_hwmod, .slave = &omap3xxx_gpmc_hwmod, .clk = "core_l3_ick", - .addr = omap3xxx_gpmc_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3459,20 +2776,10 @@ static struct omap_hwmod_class omap3xxx_sham_class = { .sysc = &omap3_sham_sysc, }; -static struct omap_hwmod_irq_info omap3_sham_mpu_irqs[] = { - { .irq = 49 + OMAP_INTC_START, }, - { .irq = -1 } -}; -static struct omap_hwmod_dma_info omap3_sham_sdma_reqs[] = { - { .name = "rx", .dma_req = 69, }, - { .dma_req = -1 } -}; static struct omap_hwmod omap3xxx_sham_hwmod = { .name = "sham", - .mpu_irqs = omap3_sham_mpu_irqs, - .sdma_reqs = omap3_sham_sdma_reqs, .main_clk = "sha12_ick", .prcm = { .omap2 = { @@ -3486,20 +2793,11 @@ static struct omap_hwmod omap3xxx_sham_hwmod = { .class = &omap3xxx_sham_class, }; -static struct omap_hwmod_addr_space omap3xxx_sham_addrs[] = { - { - .pa_start = 0x480c3000, - .pa_end = 0x480c3000 + 0x64 - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; static struct omap_hwmod_ocp_if omap3xxx_l4_core__sham = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_sham_hwmod, .clk = "sha12_ick", - .addr = omap3xxx_sham_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3525,15 +2823,9 @@ static struct omap_hwmod_class omap3xxx_aes_class = { .sysc = &omap3_aes_sysc, }; -static struct omap_hwmod_dma_info omap3_aes_sdma_reqs[] = { - { .name = "tx", .dma_req = 65, }, - { .name = "rx", .dma_req = 66, }, - { .dma_req = -1 } -}; static struct omap_hwmod omap3xxx_aes_hwmod = { .name = "aes", - .sdma_reqs = omap3_aes_sdma_reqs, .main_clk = "aes2_ick", .prcm = { .omap2 = { @@ -3547,20 +2839,11 @@ static struct omap_hwmod omap3xxx_aes_hwmod = { .class = &omap3xxx_aes_class, }; -static struct omap_hwmod_addr_space omap3xxx_aes_addrs[] = { - { - .pa_start = 0x480c5000, - .pa_end = 0x480c5000 + 0x50 - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; static struct omap_hwmod_ocp_if omap3xxx_l4_core__aes = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_aes_hwmod, .clk = "aes2_ick", - .addr = omap3xxx_aes_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3661,28 +2944,28 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { /* GP-only hwmod links */ static struct omap_hwmod_ocp_if *omap34xx_gp_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_sec__timer12, - NULL + NULL, }; static struct omap_hwmod_ocp_if *omap36xx_gp_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_sec__timer12, - NULL + NULL, }; static struct omap_hwmod_ocp_if *am35xx_gp_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_sec__timer12, - NULL + NULL, }; /* crypto hwmod links */ static struct omap_hwmod_ocp_if *omap34xx_sham_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__sham, - NULL + NULL, }; static struct omap_hwmod_ocp_if *omap34xx_aes_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__aes, - NULL + NULL, }; static struct omap_hwmod_ocp_if *omap36xx_sham_hwmod_ocp_ifs[] __initdata = { @@ -3710,14 +2993,14 @@ static struct omap_hwmod_ocp_if *am35xx_sham_hwmod_ocp_ifs[] __initdata = { static struct omap_hwmod_ocp_if *am35xx_aes_hwmod_ocp_ifs[] __initdata = { /* &omap3xxx_l4_core__aes, */ - NULL + NULL, }; /* 3430ES1-only hwmod links */ static struct omap_hwmod_ocp_if *omap3430es1_hwmod_ocp_ifs[] __initdata = { &omap3430es1_dss__l3, &omap3430es1_l4_core__dss, - NULL + NULL, }; /* 3430ES2+-only hwmod links */ @@ -3729,21 +3012,21 @@ static struct omap_hwmod_ocp_if *omap3430es2plus_hwmod_ocp_ifs[] __initdata = { &omap3xxx_usb_host_hs__l3_main_2, &omap3xxx_l4_core__usb_host_hs, &omap3xxx_l4_core__usb_tll_hs, - NULL + NULL, }; /* <= 3430ES3-only hwmod links */ static struct omap_hwmod_ocp_if *omap3430_pre_es3_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__pre_es3_mmc1, &omap3xxx_l4_core__pre_es3_mmc2, - NULL + NULL, }; /* 3430ES3+-only hwmod links */ static struct omap_hwmod_ocp_if *omap3430_es3plus_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__es3plus_mmc1, &omap3xxx_l4_core__es3plus_mmc2, - NULL + NULL, }; /* 34xx-only hwmod links (all ES revisions) */ @@ -3757,7 +3040,7 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__mmu_isp, &omap3xxx_l3_main__mmu_iva, &omap3xxx_l4_core__ssi, - NULL + NULL, }; /* 36xx-only hwmod links (all ES revisions) */ @@ -3781,7 +3064,7 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__mmu_isp, &omap3xxx_l3_main__mmu_iva, &omap3xxx_l4_core__ssi, - NULL + NULL, }; static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = { @@ -3800,7 +3083,7 @@ static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = { &am35xx_l4_core__mdio, &am35xx_emac__l3, &am35xx_l4_core__emac, - NULL + NULL, }; static struct omap_hwmod_ocp_if *omap3xxx_dss_hwmod_ocp_ifs[] __initdata = { @@ -3808,7 +3091,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__dss_dsi1, &omap3xxx_l4_core__dss_rfbi, &omap3xxx_l4_core__dss_venc, - NULL + NULL, }; /** diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index 61f2f301d739..afbce1f6f641 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -442,6 +442,31 @@ static struct omap_hwmod am43xx_adc_tsc_hwmod = { }, }; +static struct omap_hwmod_class_sysconfig am43xx_des_sysc = { + .rev_offs = 0x30, + .sysc_offs = 0x34, + .syss_offs = 0x38, + .sysc_flags = SYSS_HAS_RESET_STATUS, +}; + +static struct omap_hwmod_class am43xx_des_hwmod_class = { + .name = "des", + .sysc = &am43xx_des_sysc, +}; + +static struct omap_hwmod am43xx_des_hwmod = { + .name = "des", + .class = &am43xx_des_hwmod_class, + .clkdm_name = "l3_clkdm", + .main_clk = "l3_gclk", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_DES_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + /* dss */ static struct omap_hwmod am43xx_dss_core_hwmod = { @@ -870,6 +895,13 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__vpfe1 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +static struct omap_hwmod_ocp_if am43xx_l3_main__des = { + .master = &am33xx_l3_main_hwmod, + .slave = &am43xx_des_hwmod, + .clk = "l3_gclk", + .user = OCP_USER_MPU, +}; + static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_wkup__synctimer, &am43xx_l4_ls__timer8, @@ -917,6 +949,7 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_per__i2c2, &am33xx_l4_per__i2c3, &am33xx_l4_per__mailbox, + &am33xx_l4_per__rng, &am33xx_l4_ls__mcasp0, &am33xx_l4_ls__mcasp1, &am33xx_l4_ls__mmc0, @@ -950,6 +983,7 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am33xx_cpgmac0__mdio, &am33xx_l3_main__sha0, &am33xx_l3_main__aes0, + &am43xx_l3_main__des, &am43xx_l4_ls__ocp2scp0, &am43xx_l4_ls__ocp2scp1, &am43xx_l3_s__usbotgss0, diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 1ab7096af8e2..d0585293a381 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -690,6 +690,78 @@ static struct omap_hwmod dra7xx_dss_hdmi_hwmod = { .parent_hwmod = &dra7xx_dss_hwmod, }; +/* AES (the 'P' (public) device) */ +static struct omap_hwmod_class_sysconfig dra7xx_aes_sysc = { + .rev_offs = 0x0080, + .sysc_offs = 0x0084, + .syss_offs = 0x0088, + .sysc_flags = SYSS_HAS_RESET_STATUS, +}; + +static struct omap_hwmod_class dra7xx_aes_hwmod_class = { + .name = "aes", + .sysc = &dra7xx_aes_sysc, + .rev = 2, +}; + +/* AES1 */ +static struct omap_hwmod dra7xx_aes1_hwmod = { + .name = "aes1", + .class = &dra7xx_aes_hwmod_class, + .clkdm_name = "l4sec_clkdm", + .main_clk = "l3_iclk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4SEC_AES1_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4SEC_AES1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* AES2 */ +static struct omap_hwmod dra7xx_aes2_hwmod = { + .name = "aes2", + .class = &dra7xx_aes_hwmod_class, + .clkdm_name = "l4sec_clkdm", + .main_clk = "l3_iclk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4SEC_AES2_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4SEC_AES2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* sha0 HIB2 (the 'P' (public) device) */ +static struct omap_hwmod_class_sysconfig dra7xx_sha0_sysc = { + .rev_offs = 0x100, + .sysc_offs = 0x110, + .syss_offs = 0x114, + .sysc_flags = SYSS_HAS_RESET_STATUS, +}; + +static struct omap_hwmod_class dra7xx_sha0_hwmod_class = { + .name = "sham", + .sysc = &dra7xx_sha0_sysc, + .rev = 2, +}; + +struct omap_hwmod dra7xx_sha0_hwmod = { + .name = "sham", + .class = &dra7xx_sha0_hwmod_class, + .clkdm_name = "l4sec_clkdm", + .main_clk = "l3_iclk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4SEC_SHA2MD51_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4SEC_SHA2MD51_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + /* * 'elm' class * @@ -2541,6 +2613,62 @@ static struct omap_hwmod dra7xx_uart10_hwmod = { }, }; +/* DES (the 'P' (public) device) */ +static struct omap_hwmod_class_sysconfig dra7xx_des_sysc = { + .rev_offs = 0x0030, + .sysc_offs = 0x0034, + .syss_offs = 0x0038, + .sysc_flags = SYSS_HAS_RESET_STATUS, +}; + +static struct omap_hwmod_class dra7xx_des_hwmod_class = { + .name = "des", + .sysc = &dra7xx_des_sysc, +}; + +/* DES */ +static struct omap_hwmod dra7xx_des_hwmod = { + .name = "des", + .class = &dra7xx_des_hwmod_class, + .clkdm_name = "l4sec_clkdm", + .main_clk = "l3_iclk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4SEC_DES3DES_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4SEC_DES3DES_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* rng */ +static struct omap_hwmod_class_sysconfig dra7xx_rng_sysc = { + .rev_offs = 0x1fe0, + .sysc_offs = 0x1fe4, + .sysc_flags = SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE, + .idlemodes = SIDLE_FORCE | SIDLE_NO, + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class dra7xx_rng_hwmod_class = { + .name = "rng", + .sysc = &dra7xx_rng_sysc, +}; + +static struct omap_hwmod dra7xx_rng_hwmod = { + .name = "rng", + .class = &dra7xx_rng_hwmod_class, + .flags = HWMOD_SWSUP_SIDLE, + .clkdm_name = "l4sec_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4SEC_RNG_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4SEC_RNG_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + /* * 'usb_otg_ss' class * @@ -2929,6 +3057,30 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l3_main_1 -> aes1 */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__aes1 = { + .master = &dra7xx_l3_main_1_hwmod, + .slave = &dra7xx_aes1_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_1 -> aes2 */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__aes2 = { + .master = &dra7xx_l3_main_1_hwmod, + .slave = &dra7xx_aes2_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_1 -> sha0 */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__sha0 = { + .master = &dra7xx_l3_main_1_hwmod, + .slave = &dra7xx_sha0_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* l4_per2 -> mcasp1 */ static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp1 = { .master = &dra7xx_l4_per2_hwmod, @@ -3642,6 +3794,14 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart7 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_per1 -> des */ +static struct omap_hwmod_ocp_if dra7xx_l4_per1__des = { + .master = &dra7xx_l4_per1_hwmod, + .slave = &dra7xx_des_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* l4_per2 -> uart8 */ static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart8 = { .master = &dra7xx_l4_per2_hwmod, @@ -3666,6 +3826,13 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__uart10 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_per1 -> rng */ +static struct omap_hwmod_ocp_if dra7xx_l4_per1__rng = { + .master = &dra7xx_l4_per1_hwmod, + .slave = &dra7xx_rng_hwmod, + .user = OCP_USER_MPU, +}; + /* l4_per3 -> usb_otg_ss1 */ static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss1 = { .master = &dra7xx_l4_per3_hwmod, @@ -3800,6 +3967,9 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l3_main_1__dss, &dra7xx_l3_main_1__dispc, &dra7xx_l3_main_1__hdmi, + &dra7xx_l3_main_1__aes1, + &dra7xx_l3_main_1__aes2, + &dra7xx_l3_main_1__sha0, &dra7xx_l4_per1__elm, &dra7xx_l4_wkup__gpio1, &dra7xx_l4_per1__gpio2, @@ -3845,7 +4015,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l3_main_1__pciess2, &dra7xx_l4_cfg__pciess2, &dra7xx_l3_main_1__qspi, - &dra7xx_l4_per3__rtcss, &dra7xx_l4_cfg__sata, &dra7xx_l4_cfg__smartreflex_core, &dra7xx_l4_cfg__smartreflex_mpu, @@ -3875,6 +4044,7 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_per2__uart8, &dra7xx_l4_per2__uart9, &dra7xx_l4_wkup__uart10, + &dra7xx_l4_per1__des, &dra7xx_l4_per3__usb_otg_ss1, &dra7xx_l4_per3__usb_otg_ss2, &dra7xx_l4_per3__usb_otg_ss3, @@ -3892,6 +4062,7 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { /* GP-only hwmod links */ static struct omap_hwmod_ocp_if *dra7xx_gp_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_wkup__timer12, + &dra7xx_l4_per1__rng, NULL, }; @@ -3905,6 +4076,11 @@ static struct omap_hwmod_ocp_if *dra72x_hwmod_ocp_ifs[] __initdata = { NULL, }; +static struct omap_hwmod_ocp_if *dra74x_dra72x_hwmod_ocp_ifs[] __initdata = { + &dra7xx_l4_per3__rtcss, + NULL, +}; + int __init dra7xx_hwmod_init(void) { int ret; @@ -3920,5 +4096,9 @@ int __init dra7xx_hwmod_init(void) if (!ret && omap_type() == OMAP2_DEVICE_TYPE_GP) ret = omap_hwmod_register_links(dra7xx_gp_hwmod_ocp_ifs); + /* now for the IPs *NOT* in dra71 */ + if (!ret && !of_machine_is_compatible("ti,dra718")) + ret = omap_hwmod_register_links(dra74x_dra72x_hwmod_ocp_ifs); + return ret; } diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index 11ed5a17dd77..cdfbb44ceb0c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -19,22 +19,7 @@ #include "display.h" /* Common address space across OMAP2xxx/3xxx */ -extern struct omap_hwmod_addr_space omap2_i2c1_addr_space[]; -extern struct omap_hwmod_addr_space omap2_i2c2_addr_space[]; -extern struct omap_hwmod_addr_space omap2_dss_addrs[]; -extern struct omap_hwmod_addr_space omap2_dss_dispc_addrs[]; -extern struct omap_hwmod_addr_space omap2_dss_rfbi_addrs[]; -extern struct omap_hwmod_addr_space omap2_dss_venc_addrs[]; -extern struct omap_hwmod_addr_space omap2_timer10_addrs[]; -extern struct omap_hwmod_addr_space omap2_timer11_addrs[]; -extern struct omap_hwmod_addr_space omap2430_mmc1_addr_space[]; -extern struct omap_hwmod_addr_space omap2430_mmc2_addr_space[]; -extern struct omap_hwmod_addr_space omap2_mcspi1_addr_space[]; -extern struct omap_hwmod_addr_space omap2_mcspi2_addr_space[]; -extern struct omap_hwmod_addr_space omap2430_mcspi3_addr_space[]; extern struct omap_hwmod_addr_space omap2_dma_system_addrs[]; -extern struct omap_hwmod_addr_space omap2_mcbsp1_addrs[]; -extern struct omap_hwmod_addr_space omap2_hdq1w_addr_space[]; /* Common IP block data across OMAP2xxx */ extern struct omap_gpio_dev_attr omap2xxx_gpio_dev_attr; diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 05e20aaf68dd..477910a48448 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -31,7 +31,6 @@ #include "common.h" #include "common-board-devices.h" -#include "dss-common.h" #include "control.h" #include "omap_device.h" #include "omap-pm.h" diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 0b339861d751..003a6cb248be 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -114,8 +114,7 @@ static int pwrdm_dbg_show_counter(struct powerdomain *pwrdm, void *user) seq_printf(s, ",RET-MEMBANK%d-OFF:%d", i + 1, pwrdm->ret_mem_off_counter[i]); - seq_printf(s, "\n"); - + seq_putc(s, '\n'); return 0; } @@ -138,7 +137,7 @@ static int pwrdm_dbg_show_timer(struct powerdomain *pwrdm, void *user) seq_printf(s, ",%s:%lld", pwrdm_state_names[i], pwrdm->state_timer[i]); - seq_printf(s, "\n"); + seq_putc(s, '\n'); return 0; } diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 678d2a31dcb8..76b0454ddc49 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -30,7 +30,6 @@ #include "powerdomain.h" #include "clockdomain.h" #include "pm.h" -#include "twl-common.h" #ifdef CONFIG_SUSPEND /* @@ -72,42 +71,6 @@ void omap_pm_get_oscillator(u32 *tstart, u32 *tshut) } #endif -static int __init _init_omap_device(char *name) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - - oh = omap_hwmod_lookup(name); - if (WARN(!oh, "%s: could not find omap_hwmod for %s\n", - __func__, name)) - return -ENODEV; - - pdev = omap_device_build(oh->name, 0, oh, NULL, 0); - if (WARN(IS_ERR(pdev), "%s: could not build omap_device for %s\n", - __func__, name)) - return -ENODEV; - - return 0; -} - -/* - * Build omap_devices for processors and bus. - */ -static void __init omap2_init_processor_devices(void) -{ - _init_omap_device("mpu"); - if (omap3_has_iva()) - _init_omap_device("iva"); - - if (cpu_is_omap44xx()) { - _init_omap_device("l3_main_1"); - _init_omap_device("dsp"); - _init_omap_device("iva"); - } else { - _init_omap_device("l3_main"); - } -} - int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) { clkdm_allow_idle(clkdm); @@ -215,7 +178,7 @@ static int omap_pm_enter(suspend_state_t suspend_state) static int omap_pm_begin(suspend_state_t state) { cpu_idle_poll_ctrl(true); - if (cpu_is_omap34xx()) + if (soc_is_omap34xx()) omap_prcm_irq_prepare(); return 0; } @@ -227,7 +190,7 @@ static void omap_pm_end(void) static void omap_pm_finish(void) { - if (cpu_is_omap34xx()) + if (soc_is_omap34xx()) omap_prcm_irq_complete(); } @@ -252,7 +215,7 @@ void omap_common_suspend_init(void *pm_suspend) static void __init omap3_init_voltages(void) { - if (!cpu_is_omap34xx()) + if (!soc_is_omap34xx()) return; omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu"); @@ -261,7 +224,7 @@ static void __init omap3_init_voltages(void) static void __init omap4_init_voltages(void) { - if (!cpu_is_omap44xx()) + if (!soc_is_omap44xx()) return; omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu"); @@ -269,18 +232,8 @@ static void __init omap4_init_voltages(void) omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva"); } -static inline void omap_init_cpufreq(void) -{ - struct platform_device_info devinfo = { .name = "omap-cpufreq" }; - - if (!of_have_populated_dt()) - platform_device_register_full(&devinfo); -} - static int __init omap2_common_pm_init(void) { - if (!of_have_populated_dt()) - omap2_init_processor_devices(); omap_pm_if_init(); return 0; @@ -289,13 +242,9 @@ omap_postcore_initcall(omap2_common_pm_init); int __init omap2_common_pm_late_init(void) { - if (of_have_populated_dt()) { - omap3_twl_init(); - omap4_twl_init(); - } - /* Init the voltage layer */ - omap_pmic_late_init(); + omap3_twl_init(); + omap4_twl_init(); omap_voltage_late_init(); /* Initialize the voltages */ @@ -305,8 +254,5 @@ int __init omap2_common_pm_late_init(void) /* Smartreflex device init */ omap_devinit_smartreflex(); - /* cpufreq dummy device instantiation */ - omap_init_cpufreq(); - return 0; } diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index 178e22c146b7..b3870220612e 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -287,7 +287,7 @@ int __init omap4_pm_init(void) /* Overwrite the default cpu_do_idle() */ arm_pm_idle = omap_default_idle; - if (cpu_is_omap44xx()) + if (cpu_is_omap44xx() || soc_is_omap54xx()) omap4_idle_init(); err2: diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h index babb5db5a3a4..e2ad14e77064 100644 --- a/arch/arm/mach-omap2/prcm43xx.h +++ b/arch/arm/mach-omap2/prcm43xx.h @@ -92,6 +92,7 @@ #define AM43XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET 0x04b8 #define AM43XX_CM_PER_MMC0_CLKCTRL_OFFSET 0x04c0 #define AM43XX_CM_PER_MMC1_CLKCTRL_OFFSET 0x04c8 +#define AM43XX_CM_PER_RNG_CLKCTRL_OFFSET 0x04e0 #define AM43XX_CM_PER_SPI0_CLKCTRL_OFFSET 0x0500 #define AM43XX_CM_PER_SPI1_CLKCTRL_OFFSET 0x0508 #define AM43XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET 0x0528 @@ -133,6 +134,7 @@ #define AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET 0x0050 #define AM43XX_CM_PER_SHA0_CLKCTRL_OFFSET 0x0058 #define AM43XX_CM_PER_AES0_CLKCTRL_OFFSET 0x0028 +#define AM43XX_CM_PER_DES_CLKCTRL_OFFSET 0x0030 #define AM43XX_CM_PER_TIMER8_CLKCTRL_OFFSET 0x0560 #define AM43XX_CM_PER_TIMER9_CLKCTRL_OFFSET 0x0568 #define AM43XX_CM_PER_TIMER10_CLKCTRL_OFFSET 0x0570 diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index 62680aad2126..718981bb80cd 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -319,6 +319,9 @@ void __init omap3_prm_init_pm(bool has_uart4, bool has_iva) if (has_uart4) { en_uart4_mask = OMAP3630_EN_UART4_MASK; grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK; + } else { + en_uart4_mask = 0; + grpsel_uart4_mask = 0; } /* Enable wakeups in PER */ diff --git a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h deleted file mode 100644 index 1ee58c281a31..000000000000 --- a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * SDRC register values for the Hynix H8MBX00U0MER-0EM - * - * Copyright (C) 2009 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM -#define __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM - -#include "sdrc.h" - -/* Hynix H8MBX00U0MER-0EM */ -static struct omap_sdrc_params h8mbx00u0mer0em_sdrc_params[] = { - [0] = { - .rate = 200000000, - .actim_ctrla = 0xa2e1b4c6, - .actim_ctrlb = 0x0002131c, - .rfr_ctrl = 0x0005e601, - .mr = 0x00000032, - }, - [1] = { - .rate = 166000000, - .actim_ctrla = 0x629db4c6, - .actim_ctrlb = 0x00012214, - .rfr_ctrl = 0x0004dc01, - .mr = 0x00000032, - }, - [2] = { - .rate = 100000000, - .actim_ctrla = 0x51912284, - .actim_ctrlb = 0x0002120e, - .rfr_ctrl = 0x0002d101, - .mr = 0x00000022, - }, - [3] = { - .rate = 83000000, - .actim_ctrla = 0x31512283, - .actim_ctrlb = 0x0001220a, - .rfr_ctrl = 0x00025501, - .mr = 0x00000022, - }, - [4] = { - .rate = 0 - }, -}; - -#endif diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h deleted file mode 100644 index 85cccc004c06..000000000000 --- a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * SDRC register values for the Micron MT46H32M32LF-6 - * - * Copyright (C) 2008 Texas Instruments, Inc. - * Copyright (C) 2008-2009 Nokia Corporation - * - * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF -#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF - -#include "sdrc.h" - -/* Micron MT46H32M32LF-6 */ -/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */ -static struct omap_sdrc_params mt46h32m32lf6_sdrc_params[] = { - [0] = { - .rate = 166000000, - .actim_ctrla = 0x9a9db4c6, - .actim_ctrlb = 0x00011217, - .rfr_ctrl = 0x0004dc01, - .mr = 0x00000032, - }, - [1] = { - .rate = 165941176, - .actim_ctrla = 0x9a9db4c6, - .actim_ctrlb = 0x00011217, - .rfr_ctrl = 0x0004dc01, - .mr = 0x00000032, - }, - [2] = { - .rate = 83000000, - .actim_ctrla = 0x51512283, - .actim_ctrlb = 0x0001120c, - .rfr_ctrl = 0x00025501, - .mr = 0x00000032, - }, - [3] = { - .rate = 82970588, - .actim_ctrla = 0x51512283, - .actim_ctrlb = 0x0001120c, - .rfr_ctrl = 0x00025501, - .mr = 0x00000032, - }, - [4] = { - .rate = 0 - }, -}; - -#endif diff --git a/arch/arm/mach-omap2/sdram-nokia.c b/arch/arm/mach-omap2/sdram-nokia.c deleted file mode 100644 index 0fa7ffa9b5ed..000000000000 --- a/arch/arm/mach-omap2/sdram-nokia.c +++ /dev/null @@ -1,299 +0,0 @@ -/* - * SDRC register values for Nokia boards - * - * Copyright (C) 2008, 2010-2011 Nokia Corporation - * - * Lauri Leukkunen <lauri.leukkunen@nokia.com> - * - * Original code by Juha Yrjola <juha.yrjola@solidboot.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> - -#include "common.h" -#include "sdram-nokia.h" -#include "sdrc.h" - -/* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */ -struct sdram_timings { - u32 casl; - u32 tDAL; - u32 tDPL; - u32 tRRD; - u32 tRCD; - u32 tRP; - u32 tRAS; - u32 tRC; - u32 tRFC; - u32 tXSR; - - u32 tREF; /* in ns */ - - u32 tXP; - u32 tCKE; - u32 tWTR; -}; - -static const struct sdram_timings nokia_97dot6mhz_timings[] = { - { - .casl = 3, - .tDAL = 30725, - .tDPL = 15362, - .tRRD = 10241, - .tRCD = 20483, - .tRP = 15362, - .tRAS = 40967, - .tRC = 56330, - .tRFC = 138266, - .tXSR = 204839, - - .tREF = 7798, - - .tXP = 2, - .tCKE = 4, - .tWTR = 2, - }, -}; - -static const struct sdram_timings nokia_166mhz_timings[] = { - { - .casl = 3, - .tDAL = 33000, - .tDPL = 15000, - .tRRD = 12000, - .tRCD = 22500, - .tRP = 18000, - .tRAS = 42000, - .tRC = 66000, - .tRFC = 138000, - .tXSR = 200000, - - .tREF = 7800, - - .tXP = 2, - .tCKE = 2, - .tWTR = 2 - }, -}; - -static const struct sdram_timings nokia_195dot2mhz_timings[] = { - { - .casl = 3, - .tDAL = 30725, - .tDPL = 15362, - .tRRD = 10241, - .tRCD = 20483, - .tRP = 15362, - .tRAS = 40967, - .tRC = 56330, - .tRFC = 138266, - .tXSR = 204839, - - .tREF = 7752, - - .tXP = 2, - .tCKE = 4, - .tWTR = 2, - }, -}; - -static const struct sdram_timings nokia_200mhz_timings[] = { - { - .casl = 3, - .tDAL = 30000, - .tDPL = 15000, - .tRRD = 10000, - .tRCD = 20000, - .tRP = 15000, - .tRAS = 40000, - .tRC = 55000, - .tRFC = 140000, - .tXSR = 200000, - - .tREF = 7800, - - .tXP = 2, - .tCKE = 4, - .tWTR = 2 - }, -}; - -static const struct { - long rate; - struct sdram_timings const *data; -} nokia_timings[] = { - { 83000000, nokia_166mhz_timings }, - { 97600000, nokia_97dot6mhz_timings }, - { 100000000, nokia_200mhz_timings }, - { 166000000, nokia_166mhz_timings }, - { 195200000, nokia_195dot2mhz_timings }, - { 200000000, nokia_200mhz_timings }, -}; -static struct omap_sdrc_params nokia_sdrc_params[ARRAY_SIZE(nokia_timings) + 1]; - -static unsigned long sdrc_get_fclk_period(long rate) -{ - /* In picoseconds */ - return 1000000000 / rate; -} - -static unsigned int sdrc_ps_to_ticks(unsigned int time_ps, long rate) -{ - unsigned long tick_ps; - - /* Calculate in picosecs to yield more exact results */ - tick_ps = sdrc_get_fclk_period(rate); - - return (time_ps + tick_ps - 1) / tick_ps; -} -#undef DEBUG -#ifdef DEBUG -static int set_sdrc_timing_regval(u32 *regval, int st_bit, int end_bit, - int ticks, long rate, const char *name) -#else -static int set_sdrc_timing_regval(u32 *regval, int st_bit, int end_bit, - int ticks) -#endif -{ - int mask, nr_bits; - - nr_bits = end_bit - st_bit + 1; - if (ticks >= 1 << nr_bits) - return -1; - mask = (1 << nr_bits) - 1; - *regval &= ~(mask << st_bit); - *regval |= ticks << st_bit; -#ifdef DEBUG - printk(KERN_INFO "SDRC %s: %i ticks %i ns\n", name, ticks, - (unsigned int)sdrc_get_fclk_period(rate) * ticks / - 1000); -#endif - - return 0; -} - -#ifdef DEBUG -#define SDRC_SET_ONE(reg, st, end, field, rate) \ - if (set_sdrc_timing_regval((reg), (st), (end), \ - memory_timings->field, (rate), #field) < 0) \ - err = -1; -#else -#define SDRC_SET_ONE(reg, st, end, field, rate) \ - if (set_sdrc_timing_regval((reg), (st), (end), \ - memory_timings->field) < 0) \ - err = -1; -#endif - -#ifdef DEBUG -static int set_sdrc_timing_regval_ps(u32 *regval, int st_bit, int end_bit, - int time, long rate, const char *name) -#else -static int set_sdrc_timing_regval_ps(u32 *regval, int st_bit, int end_bit, - int time, long rate) -#endif -{ - int ticks, ret; - ret = 0; - - if (time == 0) - ticks = 0; - else - ticks = sdrc_ps_to_ticks(time, rate); - -#ifdef DEBUG - ret = set_sdrc_timing_regval(regval, st_bit, end_bit, ticks, - rate, name); -#else - ret = set_sdrc_timing_regval(regval, st_bit, end_bit, ticks); -#endif - - return ret; -} - -#ifdef DEBUG -#define SDRC_SET_ONE_PS(reg, st, end, field, rate) \ - if (set_sdrc_timing_regval_ps((reg), (st), (end), \ - memory_timings->field, \ - (rate), #field) < 0) \ - err = -1; - -#else -#define SDRC_SET_ONE_PS(reg, st, end, field, rate) \ - if (set_sdrc_timing_regval_ps((reg), (st), (end), \ - memory_timings->field, (rate)) < 0) \ - err = -1; -#endif - -static int sdrc_timings(int id, long rate, - const struct sdram_timings *memory_timings) -{ - u32 ticks_per_ms; - u32 rfr, l; - u32 actim_ctrla = 0, actim_ctrlb = 0; - u32 rfr_ctrl; - int err = 0; - long l3_rate = rate / 1000; - - SDRC_SET_ONE_PS(&actim_ctrla, 0, 4, tDAL, l3_rate); - SDRC_SET_ONE_PS(&actim_ctrla, 6, 8, tDPL, l3_rate); - SDRC_SET_ONE_PS(&actim_ctrla, 9, 11, tRRD, l3_rate); - SDRC_SET_ONE_PS(&actim_ctrla, 12, 14, tRCD, l3_rate); - SDRC_SET_ONE_PS(&actim_ctrla, 15, 17, tRP, l3_rate); - SDRC_SET_ONE_PS(&actim_ctrla, 18, 21, tRAS, l3_rate); - SDRC_SET_ONE_PS(&actim_ctrla, 22, 26, tRC, l3_rate); - SDRC_SET_ONE_PS(&actim_ctrla, 27, 31, tRFC, l3_rate); - - SDRC_SET_ONE_PS(&actim_ctrlb, 0, 7, tXSR, l3_rate); - - SDRC_SET_ONE(&actim_ctrlb, 8, 10, tXP, l3_rate); - SDRC_SET_ONE(&actim_ctrlb, 12, 14, tCKE, l3_rate); - SDRC_SET_ONE(&actim_ctrlb, 16, 17, tWTR, l3_rate); - - ticks_per_ms = l3_rate; - rfr = memory_timings[0].tREF * ticks_per_ms / 1000000; - if (rfr > 65535 + 50) - rfr = 65535; - else - rfr -= 50; - -#ifdef DEBUG - printk(KERN_INFO "SDRC tREF: %i ticks\n", rfr); -#endif - - l = rfr << 8; - rfr_ctrl = l | 0x1; /* autorefresh, reload counter with 1xARCV */ - - nokia_sdrc_params[id].rate = rate; - nokia_sdrc_params[id].actim_ctrla = actim_ctrla; - nokia_sdrc_params[id].actim_ctrlb = actim_ctrlb; - nokia_sdrc_params[id].rfr_ctrl = rfr_ctrl; - nokia_sdrc_params[id].mr = 0x32; - - nokia_sdrc_params[id + 1].rate = 0; - - return err; -} - -struct omap_sdrc_params *nokia_get_sdram_timings(void) -{ - int err = 0; - int i; - - for (i = 0; i < ARRAY_SIZE(nokia_timings); i++) { - err |= sdrc_timings(i, nokia_timings[i].rate, - nokia_timings[i].data); - if (err) - pr_err("%s: error with rate %ld: %d\n", __func__, - nokia_timings[i].rate, err); - } - - return err ? NULL : nokia_sdrc_params; -} - diff --git a/arch/arm/mach-omap2/sdram-nokia.h b/arch/arm/mach-omap2/sdram-nokia.h deleted file mode 100644 index ee63da5f8df0..000000000000 --- a/arch/arm/mach-omap2/sdram-nokia.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * SDRC register values for Nokia boards - * - * Copyright (C) 2010 Nokia - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -struct omap_sdrc_params *nokia_get_sdram_timings(void); - diff --git a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h deleted file mode 100644 index 003f7bf4e2e3..000000000000 --- a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * SDRC register values for the Numonyx M65KXXXXAM - * - * Copyright (C) 2009 Integration Software and Electronic Engineering. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM -#define __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM - -#include "sdrc.h" - -/* Numonyx M65KXXXXAM */ -static struct omap_sdrc_params m65kxxxxam_sdrc_params[] = { - [0] = { - .rate = 200000000, - .actim_ctrla = 0xe321d4c6, - .actim_ctrlb = 0x00022328, - .rfr_ctrl = 0x0005e601, - .mr = 0x00000032, - }, - [1] = { - .rate = 166000000, - .actim_ctrla = 0xba9dc485, - .actim_ctrlb = 0x00022321, - .rfr_ctrl = 0x0004dc01, - .mr = 0x00000032, - }, - [2] = { - .rate = 133000000, - .actim_ctrla = 0x9a19b485, - .actim_ctrlb = 0x0002231b, - .rfr_ctrl = 0x0003de01, - .mr = 0x00000032, - }, - [3] = { - .rate = 83000000, - .actim_ctrla = 0x594ca242, - .actim_ctrlb = 0x00022310, - .rfr_ctrl = 0x00025501, - .mr = 0x00000032, - }, - [4] = { - .rate = 0 - }, -}; - -#endif diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h deleted file mode 100644 index 8dc3de5ebb5b..000000000000 --- a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * SDRC register values for the Qimonda HYB18M512160AF-6 - * - * Copyright (C) 2008-2009 Texas Instruments, Inc. - * Copyright (C) 2008-2009 Nokia Corporation - * - * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 -#define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 - -#include "sdrc.h" - -/* Qimonda HYB18M512160AF-6 */ -static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = { - [0] = { - .rate = 166000000, - .actim_ctrla = 0x629db4c6, - .actim_ctrlb = 0x00012214, - .rfr_ctrl = 0x0004dc01, - .mr = 0x00000032, - }, - [1] = { - .rate = 165941176, - .actim_ctrla = 0x629db4c6, - .actim_ctrlb = 0x00012214, - .rfr_ctrl = 0x0004dc01, - .mr = 0x00000032, - }, - [2] = { - .rate = 83000000, - .actim_ctrla = 0x31512283, - .actim_ctrlb = 0x0001220a, - .rfr_ctrl = 0x00025501, - .mr = 0x00000022, - }, - [3] = { - .rate = 82970588, - .actim_ctrla = 0x31512283, - .actim_ctrlb = 0x0001220a, - .rfr_ctrl = 0x00025501, - .mr = 0x00000022, - }, - [4] = { - .rate = 0 - }, -}; - -#endif diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c deleted file mode 100644 index 8e072de89fed..000000000000 --- a/arch/arm/mach-omap2/serial.c +++ /dev/null @@ -1,332 +0,0 @@ -/* - * arch/arm/mach-omap2/serial.c - * - * OMAP2 serial support. - * - * Copyright (C) 2005-2008 Nokia Corporation - * Author: Paul Mundt <paul.mundt@nokia.com> - * - * Major rework for PM support by Kevin Hilman - * - * Based off of arch/arm/mach-omap/omap1/serial.c - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/pm_runtime.h> -#include <linux/console.h> -#include <linux/omap-dma.h> -#include <linux/platform_data/serial-omap.h> - -#include "common.h" -#include "omap_hwmod.h" -#include "omap_device.h" -#include "omap-pm.h" -#include "soc.h" -#include "prm2xxx_3xxx.h" -#include "pm.h" -#include "cm2xxx_3xxx.h" -#include "prm-regbits-34xx.h" -#include "control.h" -#include "mux.h" -#include "serial.h" - -/* - * NOTE: By default the serial auto_suspend timeout is disabled as it causes - * lost characters over the serial ports. This means that the UART clocks will - * stay on until power/autosuspend_delay is set for the uart from sysfs. - * This also causes that any deeper omap sleep states are blocked. - */ -#define DEFAULT_AUTOSUSPEND_DELAY -1 - -#define MAX_UART_HWMOD_NAME_LEN 16 - -struct omap_uart_state { - int num; - - struct list_head node; - struct omap_hwmod *oh; - struct omap_device_pad default_omap_uart_pads[2]; -}; - -static LIST_HEAD(uart_list); -static u8 num_uarts; -static u8 console_uart_id = -1; -static u8 uart_debug; - -#define DEFAULT_RXDMA_POLLRATE 1 /* RX DMA polling rate (us) */ -#define DEFAULT_RXDMA_BUFSIZE 4096 /* RX DMA buffer size */ -#define DEFAULT_RXDMA_TIMEOUT (3 * HZ)/* RX DMA timeout (jiffies) */ - -static struct omap_uart_port_info omap_serial_default_info[] __initdata = { - { - .dma_enabled = false, - .dma_rx_buf_size = DEFAULT_RXDMA_BUFSIZE, - .dma_rx_poll_rate = DEFAULT_RXDMA_POLLRATE, - .dma_rx_timeout = DEFAULT_RXDMA_TIMEOUT, - .autosuspend_timeout = DEFAULT_AUTOSUSPEND_DELAY, - }, -}; - -#ifdef CONFIG_PM -static void omap_uart_enable_wakeup(struct device *dev, bool enable) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - - if (!od) - return; - - if (enable) - omap_hwmod_enable_wakeup(od->hwmods[0]); - else - omap_hwmod_disable_wakeup(od->hwmods[0]); -} - -#else -static void omap_uart_enable_wakeup(struct device *dev, bool enable) -{} -#endif /* CONFIG_PM */ - -#ifdef CONFIG_OMAP_MUX - -#define OMAP_UART_DEFAULT_PAD_NAME_LEN 28 -static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN], - tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata; - -static void __init -omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata, - struct omap_uart_state *uart) -{ - uart->default_omap_uart_pads[0].name = rx_pad_name; - uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX | - OMAP_DEVICE_PAD_WAKEUP; - uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT | - OMAP_MUX_MODE0; - uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0; - uart->default_omap_uart_pads[1].name = tx_pad_name; - uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT | - OMAP_MUX_MODE0; - bdata->pads = uart->default_omap_uart_pads; - bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads); -} - -static void __init omap_serial_check_wakeup(struct omap_board_data *bdata, - struct omap_uart_state *uart) -{ - struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL; - struct omap_mux *rx_mux = NULL, *tx_mux = NULL; - char *rx_fmt, *tx_fmt; - int uart_nr = bdata->id + 1; - - if (bdata->id != 2) { - rx_fmt = "uart%d_rx.uart%d_rx"; - tx_fmt = "uart%d_tx.uart%d_tx"; - } else { - rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx"; - tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx"; - } - - snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt, - uart_nr, uart_nr); - snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt, - uart_nr, uart_nr); - - if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 && - omap_mux_get_by_name - (tx_pad_name, &tx_partition, &tx_mux) >= 0) { - u16 tx_mode, rx_mode; - - tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset); - rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset); - - /* - * Check if uart is used in default tx/rx mode i.e. in mux mode0 - * if yes then configure rx pin for wake up capability - */ - if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode)) - omap_serial_fill_uart_tx_rx_pads(bdata, uart); - } -} -#else -static void __init omap_serial_check_wakeup(struct omap_board_data *bdata, - struct omap_uart_state *uart) -{ -} -#endif - -static char *cmdline_find_option(char *str) -{ - extern char *saved_command_line; - - return strstr(saved_command_line, str); -} - -static int __init omap_serial_early_init(void) -{ - if (of_have_populated_dt()) - return -ENODEV; - - do { - char oh_name[MAX_UART_HWMOD_NAME_LEN]; - struct omap_hwmod *oh; - struct omap_uart_state *uart; - char uart_name[MAX_UART_HWMOD_NAME_LEN]; - - snprintf(oh_name, MAX_UART_HWMOD_NAME_LEN, - "uart%d", num_uarts + 1); - oh = omap_hwmod_lookup(oh_name); - if (!oh) - break; - - uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL); - if (WARN_ON(!uart)) - return -ENODEV; - - uart->oh = oh; - uart->num = num_uarts++; - list_add_tail(&uart->node, &uart_list); - snprintf(uart_name, MAX_UART_HWMOD_NAME_LEN, - "%s%d", OMAP_SERIAL_NAME, uart->num); - - if (cmdline_find_option(uart_name)) { - console_uart_id = uart->num; - - if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG) { - uart_debug = true; - pr_info("%s used as console in debug mode: uart%d clocks will not be gated", - uart_name, uart->num); - } - } - } while (1); - - return 0; -} -omap_postcore_initcall(omap_serial_early_init); - -/** - * omap_serial_init_port() - initialize single serial port - * @bdata: port specific board data pointer - * @info: platform specific data pointer - * - * This function initialies serial driver for given port only. - * Platforms can call this function instead of omap_serial_init() - * if they don't plan to use all available UARTs as serial ports. - * - * Don't mix calls to omap_serial_init_port() and omap_serial_init(), - * use only one of the two. - */ -void __init omap_serial_init_port(struct omap_board_data *bdata, - struct omap_uart_port_info *info) -{ - struct omap_uart_state *uart; - struct omap_hwmod *oh; - struct platform_device *pdev; - void *pdata = NULL; - u32 pdata_size = 0; - char *name; - struct omap_uart_port_info omap_up; - - if (WARN_ON(!bdata)) - return; - if (WARN_ON(bdata->id < 0)) - return; - if (WARN_ON(bdata->id >= num_uarts)) - return; - - list_for_each_entry(uart, &uart_list, node) - if (bdata->id == uart->num) - break; - if (!info) - info = omap_serial_default_info; - - oh = uart->oh; - name = OMAP_SERIAL_DRIVER_NAME; - - omap_up.dma_enabled = info->dma_enabled; - omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; - omap_up.flags = UPF_BOOT_AUTOCONF; - omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; - omap_up.enable_wakeup = omap_uart_enable_wakeup; - omap_up.dma_rx_buf_size = info->dma_rx_buf_size; - omap_up.dma_rx_timeout = info->dma_rx_timeout; - omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate; - omap_up.autosuspend_timeout = info->autosuspend_timeout; - - pdata = &omap_up; - pdata_size = sizeof(struct omap_uart_port_info); - - if (WARN_ON(!oh)) - return; - - pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size); - if (IS_ERR(pdev)) { - WARN(1, "Could not build omap_device for %s: %s.\n", name, - oh->name); - return; - } - - oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt); - - if (console_uart_id == bdata->id) { - omap_device_enable(pdev); - pm_runtime_set_active(&pdev->dev); - } - - oh->dev_attr = uart; - - if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads) - && !uart_debug) - device_init_wakeup(&pdev->dev, true); -} - -/** - * omap_serial_board_init() - initialize all supported serial ports - * @info: platform specific data pointer - * - * Initializes all available UARTs as serial ports. Platforms - * can call this function when they want to have default behaviour - * for serial ports (e.g initialize them all as serial ports). - */ -void __init omap_serial_board_init(struct omap_uart_port_info *info) -{ - struct omap_uart_state *uart; - struct omap_board_data bdata; - - list_for_each_entry(uart, &uart_list, node) { - bdata.id = uart->num; - bdata.flags = 0; - bdata.pads = NULL; - bdata.pads_cnt = 0; - - omap_serial_check_wakeup(&bdata, uart); - - if (!info) - omap_serial_init_port(&bdata, NULL); - else - omap_serial_init_port(&bdata, &info[uart->num]); - } -} - -/** - * omap_serial_init() - initialize all supported serial ports - * - * Initializes all available UARTs. - * Platforms can call this function when they want to have default behaviour - * for serial ports (e.g initialize them all as serial ports). - */ -void __init omap_serial_init(void) -{ - omap_serial_board_init(NULL); -} diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c deleted file mode 100644 index a72738eab009..000000000000 --- a/arch/arm/mach-omap2/twl-common.c +++ /dev/null @@ -1,564 +0,0 @@ -/* - * twl-common.c - * - * Copyright (C) 2011 Texas Instruments, Inc.. - * Author: Peter Ujfalusi <peter.ujfalusi@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/i2c.h> -#include <linux/i2c/twl.h> -#include <linux/gpio.h> -#include <linux/string.h> -#include <linux/phy/phy.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> - -#include "soc.h" -#include "twl-common.h" -#include "pm.h" -#include "voltage.h" -#include "mux.h" - -static struct i2c_board_info __initdata pmic_i2c_board_info = { - .addr = 0x48, - .flags = I2C_CLIENT_WAKE, -}; - -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) -static int twl_set_voltage(void *data, int target_uV) -{ - struct voltagedomain *voltdm = (struct voltagedomain *)data; - return voltdm_scale(voltdm, target_uV); -} - -static int twl_get_voltage(void *data) -{ - struct voltagedomain *voltdm = (struct voltagedomain *)data; - return voltdm_get_voltage(voltdm); -} -#endif - -void __init omap_pmic_init(int bus, u32 clkrate, - const char *pmic_type, int pmic_irq, - struct twl4030_platform_data *pmic_data) -{ - omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); - strlcpy(pmic_i2c_board_info.type, pmic_type, - sizeof(pmic_i2c_board_info.type)); - pmic_i2c_board_info.irq = pmic_irq; - pmic_i2c_board_info.platform_data = pmic_data; - - omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); -} - -#ifdef CONFIG_ARCH_OMAP4 -void __init omap4_pmic_init(const char *pmic_type, - struct twl4030_platform_data *pmic_data, - struct i2c_board_info *devices, int nr_devices) -{ - /* PMIC part*/ - unsigned int irq; - - omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); - omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT); - irq = omap4_xlate_irq(7 + OMAP44XX_IRQ_GIC_START); - omap_pmic_init(1, 400, pmic_type, irq, pmic_data); - - /* Register additional devices on i2c1 bus if needed */ - if (devices) - i2c_register_board_info(1, devices, nr_devices); -} -#endif - -void __init omap_pmic_late_init(void) -{ - /* Init the OMAP TWL parameters (if PMIC has been registerd) */ - if (!pmic_i2c_board_info.irq) - return; - - omap3_twl_init(); - omap4_twl_init(); -} - -#if defined(CONFIG_ARCH_OMAP3) -static struct twl4030_usb_data omap3_usb_pdata = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static int omap3_batt_table[] = { -/* 0 C */ -30800, 29500, 28300, 27100, -26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, -17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100, -11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310, -8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830, -5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170, -4040, 3910, 3790, 3670, 3550 -}; - -static struct twl4030_bci_platform_data omap3_bci_pdata = { - .battery_tmp_tbl = omap3_batt_table, - .tblsize = ARRAY_SIZE(omap3_batt_table), -}; - -static struct twl4030_madc_platform_data omap3_madc_pdata = { - .irq_line = 1, -}; - -static struct twl4030_codec_data omap3_codec; - -static struct twl4030_audio_data omap3_audio_pdata = { - .audio_mclk = 26000000, - .codec = &omap3_codec, -}; - -static struct regulator_consumer_supply omap3_vdda_dac_supplies[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), -}; - -static struct regulator_init_data omap3_vdac_idata = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3_vdda_dac_supplies), - .consumer_supplies = omap3_vdda_dac_supplies, -}; - -static struct regulator_consumer_supply omap3_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), -}; - -static struct regulator_init_data omap3_vpll2_idata = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3_vpll2_supplies), - .consumer_supplies = omap3_vpll2_supplies, -}; - -static struct regulator_consumer_supply omap3_vdd1_supply[] = { - REGULATOR_SUPPLY("vcc", "cpu0"), -}; - -static struct regulator_consumer_supply omap3_vdd2_supply[] = { - REGULATOR_SUPPLY("vcc", "l3_main.0"), -}; - -static struct regulator_init_data omap3_vdd1 = { - .constraints = { - .name = "vdd_mpu_iva", - .min_uV = 600000, - .max_uV = 1450000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3_vdd1_supply), - .consumer_supplies = omap3_vdd1_supply, -}; - -static struct regulator_init_data omap3_vdd2 = { - .constraints = { - .name = "vdd_core", - .min_uV = 600000, - .max_uV = 1450000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3_vdd2_supply), - .consumer_supplies = omap3_vdd2_supply, -}; - -static struct twl_regulator_driver_data omap3_vdd1_drvdata = { - .get_voltage = twl_get_voltage, - .set_voltage = twl_set_voltage, -}; - -static struct twl_regulator_driver_data omap3_vdd2_drvdata = { - .get_voltage = twl_get_voltage, - .set_voltage = twl_set_voltage, -}; - -void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, - u32 pdata_flags, u32 regulators_flags) -{ - if (!pmic_data->vdd1) { - omap3_vdd1.driver_data = &omap3_vdd1_drvdata; - omap3_vdd1_drvdata.data = voltdm_lookup("mpu_iva"); - pmic_data->vdd1 = &omap3_vdd1; - } - if (!pmic_data->vdd2) { - omap3_vdd2.driver_data = &omap3_vdd2_drvdata; - omap3_vdd2_drvdata.data = voltdm_lookup("core"); - pmic_data->vdd2 = &omap3_vdd2; - } - - /* Common platform data configurations */ - if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) - pmic_data->usb = &omap3_usb_pdata; - - if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci) - pmic_data->bci = &omap3_bci_pdata; - - if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc) - pmic_data->madc = &omap3_madc_pdata; - - if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio) - pmic_data->audio = &omap3_audio_pdata; - - /* Common regulator configurations */ - if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) - pmic_data->vdac = &omap3_vdac_idata; - - if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2) - pmic_data->vpll2 = &omap3_vpll2_idata; -} -#endif /* CONFIG_ARCH_OMAP3 */ - -#if defined(CONFIG_ARCH_OMAP4) -static struct twl4030_usb_data omap4_usb_pdata = { -}; - -static struct regulator_consumer_supply omap4_vdda_hdmi_dac_supplies[] = { - REGULATOR_SUPPLY("vdda_hdmi_dac", "omapdss_hdmi"), -}; - -static struct regulator_init_data omap4_vdac_idata = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap4_vdda_hdmi_dac_supplies), - .consumer_supplies = omap4_vdda_hdmi_dac_supplies, - .supply_regulator = "V2V1", -}; - -static struct regulator_init_data omap4_vaux2_idata = { - .constraints = { - .min_uV = 1200000, - .max_uV = 2800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data omap4_vaux3_idata = { - .constraints = { - .min_uV = 1000000, - .max_uV = 3000000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_consumer_supply omap4_vmmc_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -/* VMMC1 for MMC1 card */ -static struct regulator_init_data omap4_vmmc_idata = { - .constraints = { - .min_uV = 1200000, - .max_uV = 3000000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap4_vmmc_supply), - .consumer_supplies = omap4_vmmc_supply, -}; - -static struct regulator_init_data omap4_vpp_idata = { - .constraints = { - .min_uV = 1800000, - .max_uV = 2500000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data omap4_vana_idata = { - .constraints = { - .min_uV = 2100000, - .max_uV = 2100000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_consumer_supply omap4_vcxio_supply[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.1"), -}; - -static struct regulator_init_data omap4_vcxio_idata = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - .always_on = true, - }, - .num_consumer_supplies = ARRAY_SIZE(omap4_vcxio_supply), - .consumer_supplies = omap4_vcxio_supply, - .supply_regulator = "V2V1", -}; - -static struct regulator_init_data omap4_vusb_idata = { - .constraints = { - .min_uV = 3300000, - .max_uV = 3300000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data omap4_clk32kg_idata = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_consumer_supply omap4_vdd1_supply[] = { - REGULATOR_SUPPLY("vcc", "cpu0"), -}; - -static struct regulator_consumer_supply omap4_vdd2_supply[] = { - REGULATOR_SUPPLY("vcc", "iva.0"), -}; - -static struct regulator_consumer_supply omap4_vdd3_supply[] = { - REGULATOR_SUPPLY("vcc", "l3_main.0"), -}; - -static struct regulator_init_data omap4_vdd1 = { - .constraints = { - .name = "vdd_mpu", - .min_uV = 500000, - .max_uV = 1500000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - }, - .num_consumer_supplies = ARRAY_SIZE(omap4_vdd1_supply), - .consumer_supplies = omap4_vdd1_supply, -}; - -static struct regulator_init_data omap4_vdd2 = { - .constraints = { - .name = "vdd_iva", - .min_uV = 500000, - .max_uV = 1500000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - }, - .num_consumer_supplies = ARRAY_SIZE(omap4_vdd2_supply), - .consumer_supplies = omap4_vdd2_supply, -}; - -static struct regulator_init_data omap4_vdd3 = { - .constraints = { - .name = "vdd_core", - .min_uV = 500000, - .max_uV = 1500000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - }, - .num_consumer_supplies = ARRAY_SIZE(omap4_vdd3_supply), - .consumer_supplies = omap4_vdd3_supply, -}; - - -static struct twl_regulator_driver_data omap4_vdd1_drvdata = { - .get_voltage = twl_get_voltage, - .set_voltage = twl_set_voltage, -}; - -static struct twl_regulator_driver_data omap4_vdd2_drvdata = { - .get_voltage = twl_get_voltage, - .set_voltage = twl_set_voltage, -}; - -static struct twl_regulator_driver_data omap4_vdd3_drvdata = { - .get_voltage = twl_get_voltage, - .set_voltage = twl_set_voltage, -}; - -static struct regulator_consumer_supply omap4_v1v8_supply[] = { - REGULATOR_SUPPLY("vio", "1-004b"), -}; - -static struct regulator_init_data omap4_v1v8_idata = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - .always_on = true, - }, - .num_consumer_supplies = ARRAY_SIZE(omap4_v1v8_supply), - .consumer_supplies = omap4_v1v8_supply, -}; - -static struct regulator_consumer_supply omap4_v2v1_supply[] = { - REGULATOR_SUPPLY("v2v1", "1-004b"), -}; - -static struct regulator_init_data omap4_v2v1_idata = { - .constraints = { - .min_uV = 2100000, - .max_uV = 2100000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap4_v2v1_supply), - .consumer_supplies = omap4_v2v1_supply, -}; - -void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, - u32 pdata_flags, u32 regulators_flags) -{ - if (!pmic_data->vdd1) { - omap4_vdd1.driver_data = &omap4_vdd1_drvdata; - omap4_vdd1_drvdata.data = voltdm_lookup("mpu"); - pmic_data->vdd1 = &omap4_vdd1; - } - - if (!pmic_data->vdd2) { - omap4_vdd2.driver_data = &omap4_vdd2_drvdata; - omap4_vdd2_drvdata.data = voltdm_lookup("iva"); - pmic_data->vdd2 = &omap4_vdd2; - } - - if (!pmic_data->vdd3) { - omap4_vdd3.driver_data = &omap4_vdd3_drvdata; - omap4_vdd3_drvdata.data = voltdm_lookup("core"); - pmic_data->vdd3 = &omap4_vdd3; - } - - /* Common platform data configurations */ - if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) - pmic_data->usb = &omap4_usb_pdata; - - /* Common regulator configurations */ - if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) - pmic_data->vdac = &omap4_vdac_idata; - - if (regulators_flags & TWL_COMMON_REGULATOR_VAUX2 && !pmic_data->vaux2) - pmic_data->vaux2 = &omap4_vaux2_idata; - - if (regulators_flags & TWL_COMMON_REGULATOR_VAUX3 && !pmic_data->vaux3) - pmic_data->vaux3 = &omap4_vaux3_idata; - - if (regulators_flags & TWL_COMMON_REGULATOR_VMMC && !pmic_data->vmmc) - pmic_data->vmmc = &omap4_vmmc_idata; - - if (regulators_flags & TWL_COMMON_REGULATOR_VPP && !pmic_data->vpp) - pmic_data->vpp = &omap4_vpp_idata; - - if (regulators_flags & TWL_COMMON_REGULATOR_VANA && !pmic_data->vana) - pmic_data->vana = &omap4_vana_idata; - - if (regulators_flags & TWL_COMMON_REGULATOR_VCXIO && !pmic_data->vcxio) - pmic_data->vcxio = &omap4_vcxio_idata; - - if (regulators_flags & TWL_COMMON_REGULATOR_VUSB && !pmic_data->vusb) - pmic_data->vusb = &omap4_vusb_idata; - - if (regulators_flags & TWL_COMMON_REGULATOR_CLK32KG && - !pmic_data->clk32kg) - pmic_data->clk32kg = &omap4_clk32kg_idata; - - if (regulators_flags & TWL_COMMON_REGULATOR_V1V8 && !pmic_data->v1v8) - pmic_data->v1v8 = &omap4_v1v8_idata; - - if (regulators_flags & TWL_COMMON_REGULATOR_V2V1 && !pmic_data->v2v1) - pmic_data->v2v1 = &omap4_v2v1_idata; -} -#endif /* CONFIG_ARCH_OMAP4 */ - -#if IS_ENABLED(CONFIG_SND_OMAP_SOC_OMAP_TWL4030) -#include <linux/platform_data/omap-twl4030.h> - -/* Commonly used configuration */ -static struct omap_tw4030_pdata omap_twl4030_audio_data; - -static struct platform_device audio_device = { - .name = "omap-twl4030", - .id = -1, -}; - -void omap_twl4030_audio_init(char *card_name, - struct omap_tw4030_pdata *pdata) -{ - if (!pdata) - pdata = &omap_twl4030_audio_data; - - pdata->card_name = card_name; - - audio_device.dev.platform_data = pdata; - platform_device_register(&audio_device); -} - -#else /* SOC_OMAP_TWL4030 */ -void omap_twl4030_audio_init(char *card_name, - struct omap_tw4030_pdata *pdata) -{ - return; -} -#endif /* SOC_OMAP_TWL4030 */ diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h deleted file mode 100644 index 24b65d081b69..000000000000 --- a/arch/arm/mach-omap2/twl-common.h +++ /dev/null @@ -1,66 +0,0 @@ -#ifndef __OMAP_PMIC_COMMON__ -#define __OMAP_PMIC_COMMON__ - -#include "common.h" - -#define TWL_COMMON_PDATA_USB (1 << 0) -#define TWL_COMMON_PDATA_BCI (1 << 1) -#define TWL_COMMON_PDATA_MADC (1 << 2) -#define TWL_COMMON_PDATA_AUDIO (1 << 3) - -/* Common LDO regulators for TWL4030/TWL6030 */ -#define TWL_COMMON_REGULATOR_VDAC (1 << 0) -#define TWL_COMMON_REGULATOR_VAUX1 (1 << 1) -#define TWL_COMMON_REGULATOR_VAUX2 (1 << 2) -#define TWL_COMMON_REGULATOR_VAUX3 (1 << 3) - -/* TWL6030 LDO regulators */ -#define TWL_COMMON_REGULATOR_VMMC (1 << 4) -#define TWL_COMMON_REGULATOR_VPP (1 << 5) -#define TWL_COMMON_REGULATOR_VUSIM (1 << 6) -#define TWL_COMMON_REGULATOR_VANA (1 << 7) -#define TWL_COMMON_REGULATOR_VCXIO (1 << 8) -#define TWL_COMMON_REGULATOR_VUSB (1 << 9) -#define TWL_COMMON_REGULATOR_CLK32KG (1 << 10) -#define TWL_COMMON_REGULATOR_V1V8 (1 << 11) -#define TWL_COMMON_REGULATOR_V2V1 (1 << 12) - -/* TWL4030 LDO regulators */ -#define TWL_COMMON_REGULATOR_VPLL1 (1 << 4) -#define TWL_COMMON_REGULATOR_VPLL2 (1 << 5) - - -struct twl4030_platform_data; -struct twl6040_platform_data; -struct omap_tw4030_pdata; -struct i2c_board_info; - -void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, - struct twl4030_platform_data *pmic_data); -void omap_pmic_late_init(void); - -static inline void omap2_pmic_init(const char *pmic_type, - struct twl4030_platform_data *pmic_data) -{ - omap_pmic_init(2, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data); -} - -static inline void omap3_pmic_init(const char *pmic_type, - struct twl4030_platform_data *pmic_data) -{ - omap_pmic_init(1, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data); -} - -void omap4_pmic_init(const char *pmic_type, - struct twl4030_platform_data *pmic_data, - struct i2c_board_info *devices, int nr_devices); - -void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, - u32 pdata_flags, u32 regulators_flags); - -void omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, - u32 pdata_flags, u32 regulators_flags); - -void omap_twl4030_audio_init(char *card_name, struct omap_tw4030_pdata *pdata); - -#endif /* __OMAP_PMIC_COMMON__ */ diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c deleted file mode 100644 index 745367c0c2bb..000000000000 --- a/arch/arm/mach-omap2/usb-host.c +++ /dev/null @@ -1,496 +0,0 @@ -/* - * usb-host.c - OMAP USB Host - * - * This file will contain the board specific details for the - * Synopsys EHCI/OHCI host controller on OMAP3430 and onwards - * - * Copyright (C) 2007-2011 Texas Instruments - * Author: Vikram Pandita <vikram.pandita@ti.com> - * Author: Keshava Munegowda <keshava_mgowda@ti.com> - * - * Generalization by: - * Felipe Balbi <balbi@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/dma-mapping.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/string.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/usb/phy.h> -#include <linux/usb/usb_phy_generic.h> - -#include "soc.h" -#include "omap_device.h" -#include "mux.h" -#include "usb.h" - -#ifdef CONFIG_MFD_OMAP_USB_HOST - -#define OMAP_USBHS_DEVICE "usbhs_omap" -#define OMAP_USBTLL_DEVICE "usbhs_tll" -#define USBHS_UHH_HWMODNAME "usb_host_hs" -#define USBHS_TLL_HWMODNAME "usb_tll_hs" - -/* MUX settings for EHCI pins */ -/* - * setup_ehci_io_mux - initialize IO pad mux for USBHOST - */ -static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) -{ - switch (port_mode[0]) { - case OMAP_EHCI_PORT_MODE_PHY: - omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT); - omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT); - omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN); - break; - case OMAP_EHCI_PORT_MODE_TLL: - omap_mux_init_signal("hsusb1_tll_stp", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hsusb1_tll_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case OMAP_USBHS_PORT_MODE_UNUSED: - /* FALLTHROUGH */ - default: - break; - } - - switch (port_mode[1]) { - case OMAP_EHCI_PORT_MODE_PHY: - omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT); - omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT); - omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case OMAP_EHCI_PORT_MODE_TLL: - omap_mux_init_signal("hsusb2_tll_stp", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hsusb2_tll_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case OMAP_USBHS_PORT_MODE_UNUSED: - /* FALLTHROUGH */ - default: - break; - } - - switch (port_mode[2]) { - case OMAP_EHCI_PORT_MODE_PHY: - printk(KERN_WARNING "Port3 can't be used in PHY mode\n"); - break; - case OMAP_EHCI_PORT_MODE_TLL: - omap_mux_init_signal("hsusb3_tll_stp", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hsusb3_tll_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case OMAP_USBHS_PORT_MODE_UNUSED: - /* FALLTHROUGH */ - default: - break; - } - - return; -} - -static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) -{ - switch (port_mode[0]) { - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: - omap_mux_init_signal("mm1_rxdp", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("mm1_rxdm", - OMAP_PIN_INPUT_PULLDOWN); - /* FALLTHROUGH */ - case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: - case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: - omap_mux_init_signal("mm1_rxrcv", - OMAP_PIN_INPUT_PULLDOWN); - /* FALLTHROUGH */ - case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: - omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT); - /* FALLTHROUGH */ - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: - omap_mux_init_signal("mm1_txse0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("mm1_txdat", - OMAP_PIN_INPUT_PULLDOWN); - break; - case OMAP_USBHS_PORT_MODE_UNUSED: - /* FALLTHROUGH */ - default: - break; - } - switch (port_mode[1]) { - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: - omap_mux_init_signal("mm2_rxdp", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("mm2_rxdm", - OMAP_PIN_INPUT_PULLDOWN); - /* FALLTHROUGH */ - case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: - case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: - omap_mux_init_signal("mm2_rxrcv", - OMAP_PIN_INPUT_PULLDOWN); - /* FALLTHROUGH */ - case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: - omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT); - /* FALLTHROUGH */ - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: - omap_mux_init_signal("mm2_txse0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("mm2_txdat", - OMAP_PIN_INPUT_PULLDOWN); - break; - case OMAP_USBHS_PORT_MODE_UNUSED: - /* FALLTHROUGH */ - default: - break; - } - switch (port_mode[2]) { - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: - omap_mux_init_signal("mm3_rxdp", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("mm3_rxdm", - OMAP_PIN_INPUT_PULLDOWN); - /* FALLTHROUGH */ - case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: - case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: - omap_mux_init_signal("mm3_rxrcv", - OMAP_PIN_INPUT_PULLDOWN); - /* FALLTHROUGH */ - case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: - omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT); - /* FALLTHROUGH */ - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: - omap_mux_init_signal("mm3_txse0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("mm3_txdat", - OMAP_PIN_INPUT_PULLDOWN); - break; - case OMAP_USBHS_PORT_MODE_UNUSED: - /* FALLTHROUGH */ - default: - break; - } -} - -void __init usbhs_init(struct usbhs_omap_platform_data *pdata) -{ - struct omap_hwmod *uhh_hwm, *tll_hwm; - struct platform_device *pdev; - int bus_id = -1; - - if (cpu_is_omap34xx()) { - setup_ehci_io_mux(pdata->port_mode); - setup_ohci_io_mux(pdata->port_mode); - - if (omap_rev() <= OMAP3430_REV_ES2_1) - pdata->single_ulpi_bypass = true; - - } - - uhh_hwm = omap_hwmod_lookup(USBHS_UHH_HWMODNAME); - if (!uhh_hwm) { - pr_err("Could not look up %s\n", USBHS_UHH_HWMODNAME); - return; - } - - tll_hwm = omap_hwmod_lookup(USBHS_TLL_HWMODNAME); - if (!tll_hwm) { - pr_err("Could not look up %s\n", USBHS_TLL_HWMODNAME); - return; - } - - pdev = omap_device_build(OMAP_USBTLL_DEVICE, bus_id, tll_hwm, - pdata, sizeof(*pdata)); - if (IS_ERR(pdev)) { - pr_err("Could not build hwmod device %s\n", - USBHS_TLL_HWMODNAME); - return; - } - - pdev = omap_device_build(OMAP_USBHS_DEVICE, bus_id, uhh_hwm, - pdata, sizeof(*pdata)); - if (IS_ERR(pdev)) { - pr_err("Could not build hwmod devices %s\n", - USBHS_UHH_HWMODNAME); - return; - } -} - -#else - -void __init usbhs_init(struct usbhs_omap_platform_data *pdata) -{ -} - -#endif - -/* Template for PHY regulators */ -static struct fixed_voltage_config hsusb_reg_config = { - /* .supply_name filled later */ - .microvolts = 3300000, - .gpio = -1, /* updated later */ - .startup_delay = 70000, /* 70msec */ - .enable_high = 1, /* updated later */ - .enabled_at_boot = 0, /* keep in RESET */ - /* .init_data filled later */ -}; - -static const char *nop_name = "usb_phy_generic"; /* NOP PHY driver */ -static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */ - -/** - * usbhs_add_regulator - Add a gpio based fixed voltage regulator device - * @name: name for the regulator - * @dev_id: device id of the device this regulator supplies power to - * @dev_supply: supply name that the device expects - * @gpio: GPIO number - * @polarity: 1 - Active high, 0 - Active low - */ -static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply, - int gpio, int polarity) -{ - struct regulator_consumer_supply *supplies; - struct regulator_init_data *reg_data; - struct fixed_voltage_config *config; - struct platform_device *pdev; - struct platform_device_info pdevinfo; - int ret = -ENOMEM; - - supplies = kzalloc(sizeof(*supplies), GFP_KERNEL); - if (!supplies) - return -ENOMEM; - - supplies->supply = dev_supply; - supplies->dev_name = dev_id; - - reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL); - if (!reg_data) - goto err_data; - - reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS; - reg_data->consumer_supplies = supplies; - reg_data->num_consumer_supplies = 1; - - config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config), - GFP_KERNEL); - if (!config) - goto err_config; - - config->supply_name = kstrdup(name, GFP_KERNEL); - if (!config->supply_name) - goto err_supplyname; - - config->gpio = gpio; - config->enable_high = polarity; - config->init_data = reg_data; - - /* create a regulator device */ - memset(&pdevinfo, 0, sizeof(pdevinfo)); - pdevinfo.name = reg_name; - pdevinfo.id = PLATFORM_DEVID_AUTO; - pdevinfo.data = config; - pdevinfo.size_data = sizeof(*config); - - pdev = platform_device_register_full(&pdevinfo); - if (IS_ERR(pdev)) { - ret = PTR_ERR(pdev); - pr_err("%s: Failed registering regulator %s for %s : %d\n", - __func__, name, dev_id, ret); - goto err_register; - } - - return 0; - -err_register: - kfree(config->supply_name); -err_supplyname: - kfree(config); -err_config: - kfree(reg_data); -err_data: - kfree(supplies); - return ret; -} - -#define MAX_STR 20 - -int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) -{ - char rail_name[MAX_STR]; - int i; - struct platform_device *pdev; - char *phy_id; - struct platform_device_info pdevinfo; - struct usb_phy_generic_platform_data nop_pdata; - - for (i = 0; i < num_phys; i++) { - - if (!phy->port) { - pr_err("%s: Invalid port 0. Must start from 1\n", - __func__); - continue; - } - - /* do we need a NOP PHY device ? */ - if (!gpio_is_valid(phy->reset_gpio) && - !gpio_is_valid(phy->vcc_gpio)) - continue; - - phy_id = kmalloc(MAX_STR, GFP_KERNEL); - if (!phy_id) { - pr_err("%s: kmalloc() failed\n", __func__); - return -ENOMEM; - } - - /* set platform data */ - memset(&nop_pdata, 0, sizeof(nop_pdata)); - if (gpio_is_valid(phy->vcc_gpio)) - nop_pdata.needs_vcc = true; - nop_pdata.gpio_reset = phy->reset_gpio; - nop_pdata.type = USB_PHY_TYPE_USB2; - - /* create a NOP PHY device */ - memset(&pdevinfo, 0, sizeof(pdevinfo)); - pdevinfo.name = nop_name; - pdevinfo.id = phy->port; - pdevinfo.data = &nop_pdata; - pdevinfo.size_data = - sizeof(struct usb_phy_generic_platform_data); - scnprintf(phy_id, MAX_STR, "usb_phy_generic.%d", - phy->port); - pdev = platform_device_register_full(&pdevinfo); - if (IS_ERR(pdev)) { - pr_err("%s: Failed to register device %s : %ld\n", - __func__, phy_id, PTR_ERR(pdev)); - kfree(phy_id); - continue; - } - - usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id); - - /* Do we need VCC regulator ? */ - if (gpio_is_valid(phy->vcc_gpio)) { - scnprintf(rail_name, MAX_STR, "hsusb%d_vcc", phy->port); - usbhs_add_regulator(rail_name, phy_id, "vcc", - phy->vcc_gpio, phy->vcc_polarity); - } - - phy++; - } - - return 0; -} diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c deleted file mode 100644 index e4562b2b973b..000000000000 --- a/arch/arm/mach-omap2/usb-musb.c +++ /dev/null @@ -1,106 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/usb-musb.c - * - * This file will contain the board specific details for the - * MENTOR USB OTG controller on OMAP3430 - * - * Copyright (C) 2007-2008 Texas Instruments - * Copyright (C) 2008 Nokia Corporation - * Author: Vikram Pandita - * - * Generalization by: - * Felipe Balbi <felipe.balbi@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/dma-mapping.h> -#include <linux/io.h> -#include <linux/usb/musb.h> - -#include "omap_device.h" -#include "soc.h" -#include "mux.h" -#include "usb.h" - -static struct musb_hdrc_config musb_config = { - .multipoint = 1, - .dyn_fifo = 1, - .num_eps = 16, - .ram_bits = 12, -}; - -static struct musb_hdrc_platform_data musb_plat = { - .mode = MUSB_OTG, - - /* .clock is set dynamically */ - .config = &musb_config, - - /* REVISIT charge pump on TWL4030 can supply up to - * 100 mA ... but this value is board-specific, like - * "mode", and should be passed to usb_musb_init(). - */ - .power = 50, /* up to 100 mA */ -}; - -static u64 musb_dmamask = DMA_BIT_MASK(32); - -static struct omap_musb_board_data musb_default_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - -void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - struct device *dev; - int bus_id = -1; - const char *oh_name, *name; - struct omap_musb_board_data *board_data; - - if (musb_board_data) - board_data = musb_board_data; - else - board_data = &musb_default_board_data; - - /* - * REVISIT: This line can be removed once all the platforms using - * musb_core.c have been converted to use use clkdev. - */ - musb_plat.clock = "ick"; - musb_plat.board_data = board_data; - musb_plat.power = board_data->power >> 1; - musb_plat.mode = board_data->mode; - musb_plat.extvbus = board_data->extvbus; - - oh_name = "usb_otg_hs"; - name = "musb-omap2430"; - - oh = omap_hwmod_lookup(oh_name); - if (WARN(!oh, "%s: could not find omap_hwmod for %s\n", - __func__, oh_name)) - return; - - pdev = omap_device_build(name, bus_id, oh, &musb_plat, - sizeof(musb_plat)); - if (IS_ERR(pdev)) { - pr_err("Could not build omap_device for %s %s\n", - name, oh_name); - return; - } - - dev = &pdev->dev; - get_device(dev); - dev->dma_mask = &musb_dmamask; - dev->coherent_dma_mask = musb_dmamask; - put_device(dev); -} diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index e554d9e66a1c..c2a6fbd7f8a9 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -22,8 +22,6 @@ #include "gpmc.h" -#include "mux.h" - static u8 async_cs, sync_cs; static unsigned refclk_psec; @@ -226,25 +224,6 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, } tusb_device.dev.platform_data = data; - /* REVISIT let the driver know what DMA channels work */ - if (!dmachan) - tusb_device.dev.dma_mask = NULL; - else { - /* assume OMAP 2420 ES2.0 and later */ - if (dmachan & (1 << 0)) - omap_mux_init_signal("sys_ndmareq0", 0); - if (dmachan & (1 << 1)) - omap_mux_init_signal("sys_ndmareq1", 0); - if (dmachan & (1 << 2)) - omap_mux_init_signal("sys_ndmareq2", 0); - if (dmachan & (1 << 3)) - omap_mux_init_signal("sys_ndmareq3", 0); - if (dmachan & (1 << 4)) - omap_mux_init_signal("sys_ndmareq4", 0); - if (dmachan & (1 << 5)) - omap_mux_init_signal("sys_ndmareq5", 0); - } - /* so far so good ... register the device */ status = platform_device_register(&tusb_device); if (status < 0) { diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index cba8cada8c81..cd15dbd62671 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -87,6 +87,12 @@ int voltdm_scale(struct voltagedomain *voltdm, return -ENODATA; } + if (!voltdm->volt_data) { + pr_err("%s: No voltage data defined for vdd_%s\n", + __func__, voltdm->name); + return -ENODATA; + } + /* Adjust voltage to the exact voltage from the OPP table */ for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) { if (voltdm->volt_data[i].volt_nominal >= target_volt) { diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 89bb0fc796bd..633442ad4e4c 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -84,13 +84,6 @@ config MACH_LINKSTATION_PRO Buffalo Linkstation Pro/Live platform. Both v1 and v2 devices are supported. -config MACH_LINKSTATION_LSCHL - bool "Buffalo Linkstation Live v3 (LS-CHL)" - select I2C_BOARDINFO if I2C - help - Say 'Y' here if you want your kernel to support the - Buffalo Linkstation Live v3 (LS-CHL) platform. - config MACH_LINKSTATION_MINI bool "Buffalo Linkstation Mini (Flattened Device Tree)" select ARCH_ORION5X_DT diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 4b2502b4ca0d..ae91872eeee4 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o -obj-$(CONFIG_MACH_LINKSTATION_LSCHL) += ls-chl-setup.o obj-$(CONFIG_ARCH_ORION5X_DT) += board-dt.o obj-$(CONFIG_MACH_D2NET_DT) += board-d2net.o diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c deleted file mode 100644 index dfdaa8a498a4..000000000000 --- a/arch/arm/mach-orion5x/ls-chl-setup.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - * arch/arm/mach-orion5x/ls-chl-setup.c - * - * Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/gpio-fan.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include "common.h" -#include "mpp.h" -#include "orion5x.h" - -/***************************************************************************** - * Linkstation LS-CHL Info - ****************************************************************************/ - -/* - * 256K NOR flash Device bus boot chip select - */ - -#define LSCHL_NOR_BOOT_BASE 0xf4000000 -#define LSCHL_NOR_BOOT_SIZE SZ_256K - -/***************************************************************************** - * 256KB NOR Flash on BOOT Device - ****************************************************************************/ - -static struct physmap_flash_data lschl_nor_flash_data = { - .width = 1, -}; - -static struct resource lschl_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = LSCHL_NOR_BOOT_BASE, - .end = LSCHL_NOR_BOOT_BASE + LSCHL_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device lschl_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &lschl_nor_flash_data, - }, - .num_resources = 1, - .resource = &lschl_nor_flash_resource, -}; - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data lschl_eth_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/***************************************************************************** - * RTC 5C372a on I2C bus - ****************************************************************************/ - -static struct i2c_board_info __initdata lschl_i2c_rtc = { - I2C_BOARD_INFO("rs5c372a", 0x32), -}; - -/***************************************************************************** - * LEDs attached to GPIO - ****************************************************************************/ - -#define LSCHL_GPIO_LED_ALARM 2 -#define LSCHL_GPIO_LED_INFO 3 -#define LSCHL_GPIO_LED_FUNC 17 -#define LSCHL_GPIO_LED_PWR 0 - -static struct gpio_led lschl_led_pins[] = { - { - .name = "alarm:red", - .gpio = LSCHL_GPIO_LED_ALARM, - .active_low = 1, - }, { - .name = "info:amber", - .gpio = LSCHL_GPIO_LED_INFO, - .active_low = 1, - }, { - .name = "func:blue:top", - .gpio = LSCHL_GPIO_LED_FUNC, - .active_low = 1, - }, { - .name = "power:blue:bottom", - .gpio = LSCHL_GPIO_LED_PWR, - }, -}; - -static struct gpio_led_platform_data lschl_led_data = { - .leds = lschl_led_pins, - .num_leds = ARRAY_SIZE(lschl_led_pins), -}; - -static struct platform_device lschl_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &lschl_led_data, - }, -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ -static struct mv_sata_platform_data lschl_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * LS-CHL specific power off method: reboot - ****************************************************************************/ -/* - * On the LS-CHL, the shutdown process is following: - * - Userland monitors key events until the power switch goes to off position - * - The board reboots - * - U-boot starts and goes into an idle mode waiting for the user - * to move the switch to ON position - * - */ - -static void lschl_power_off(void) -{ - orion5x_restart(REBOOT_HARD, NULL); -} - -/***************************************************************************** - * General Setup - ****************************************************************************/ -#define LSCHL_GPIO_USB_POWER 9 -#define LSCHL_GPIO_AUTO_POWER 17 -#define LSCHL_GPIO_POWER 18 - -/**************************************************************************** - * GPIO Attached Keys - ****************************************************************************/ -#define LSCHL_GPIO_KEY_FUNC 15 -#define LSCHL_GPIO_KEY_POWER 8 -#define LSCHL_GPIO_KEY_AUTOPOWER 10 -#define LSCHL_SW_POWER 0x00 -#define LSCHL_SW_AUTOPOWER 0x01 -#define LSCHL_SW_FUNC 0x02 - -static struct gpio_keys_button lschl_buttons[] = { - { - .type = EV_SW, - .code = LSCHL_SW_POWER, - .gpio = LSCHL_GPIO_KEY_POWER, - .desc = "Power-on Switch", - .active_low = 1, - }, { - .type = EV_SW, - .code = LSCHL_SW_AUTOPOWER, - .gpio = LSCHL_GPIO_KEY_AUTOPOWER, - .desc = "Power-auto Switch", - .active_low = 1, - }, { - .type = EV_SW, - .code = LSCHL_SW_FUNC, - .gpio = LSCHL_GPIO_KEY_FUNC, - .desc = "Function Switch", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data lschl_button_data = { - .buttons = lschl_buttons, - .nbuttons = ARRAY_SIZE(lschl_buttons), -}; - -static struct platform_device lschl_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &lschl_button_data, - }, -}; - -#define LSCHL_GPIO_HDD_POWER 1 - -/**************************************************************************** - * GPIO Fan - ****************************************************************************/ - -#define LSCHL_GPIO_FAN_LOW 16 -#define LSCHL_GPIO_FAN_HIGH 14 -#define LSCHL_GPIO_FAN_LOCK 6 - -static struct gpio_fan_alarm lschl_alarm = { - .gpio = LSCHL_GPIO_FAN_LOCK, -}; - -static struct gpio_fan_speed lschl_speeds[] = { - { - .rpm = 0, - .ctrl_val = 3, - }, { - .rpm = 1500, - .ctrl_val = 2, - }, { - .rpm = 3250, - .ctrl_val = 1, - }, { - .rpm = 5000, - .ctrl_val = 0, - }, -}; - -static int lschl_gpio_list[] = { - LSCHL_GPIO_FAN_HIGH, LSCHL_GPIO_FAN_LOW, -}; - -static struct gpio_fan_platform_data lschl_fan_data = { - .num_ctrl = ARRAY_SIZE(lschl_gpio_list), - .ctrl = lschl_gpio_list, - .alarm = &lschl_alarm, - .num_speed = ARRAY_SIZE(lschl_speeds), - .speed = lschl_speeds, -}; - -static struct platform_device lschl_fan_device = { - .name = "gpio-fan", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &lschl_fan_data, - }, -}; - -/**************************************************************************** - * GPIO Data - ****************************************************************************/ - -static unsigned int lschl_mpp_modes[] __initdata = { - MPP0_GPIO, /* LED POWER */ - MPP1_GPIO, /* HDD POWER */ - MPP2_GPIO, /* LED ALARM */ - MPP3_GPIO, /* LED INFO */ - MPP4_UNUSED, - MPP5_UNUSED, - MPP6_GPIO, /* FAN LOCK */ - MPP7_GPIO, /* SW INIT */ - MPP8_GPIO, /* SW POWER */ - MPP9_GPIO, /* USB POWER */ - MPP10_GPIO, /* SW AUTO POWER */ - MPP11_UNUSED, - MPP12_UNUSED, - MPP13_UNUSED, - MPP14_GPIO, /* FAN HIGH */ - MPP15_GPIO, /* SW FUNC */ - MPP16_GPIO, /* FAN LOW */ - MPP17_GPIO, /* LED FUNC */ - MPP18_UNUSED, - MPP19_UNUSED, - 0, -}; - -static void __init lschl_init(void) -{ - /* - * Setup basic Orion functions. Needs to be called early. - */ - orion5x_init(); - - orion5x_mpp_conf(lschl_mpp_modes); - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - orion5x_ehci1_init(); - orion5x_eth_init(&lschl_eth_data); - orion5x_i2c_init(); - orion5x_sata_init(&lschl_sata_data); - orion5x_uart0_init(); - orion5x_xor_init(); - - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - LSCHL_NOR_BOOT_BASE, - LSCHL_NOR_BOOT_SIZE); - platform_device_register(&lschl_nor_flash); - - platform_device_register(&lschl_leds); - - platform_device_register(&lschl_button_device); - - platform_device_register(&lschl_fan_device); - - i2c_register_board_info(0, &lschl_i2c_rtc, 1); - - /* usb power on */ - gpio_set_value(LSCHL_GPIO_USB_POWER, 1); - - /* register power-off method */ - pm_power_off = lschl_power_off; - - pr_info("%s: finished\n", __func__); -} - -MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)") - /* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */ - .atag_offset = 0x100, - .nr_irqs = ORION5X_NR_IRQS, - .init_machine = lschl_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END diff --git a/arch/arm/mach-oxnas/Kconfig b/arch/arm/mach-oxnas/Kconfig index 29100beb2e7f..8fa4557e27a9 100644 --- a/arch/arm/mach-oxnas/Kconfig +++ b/arch/arm/mach-oxnas/Kconfig @@ -1,9 +1,16 @@ menuconfig ARCH_OXNAS bool "Oxford Semiconductor OXNAS Family SoCs" select ARCH_HAS_RESET_CONTROLLER + select COMMON_CLK_OXNAS select GPIOLIB + select MFD_SYSCON + select OXNAS_RPS_TIMER + select PINCTRL_OXNAS + select RESET_CONTROLLER + select RESET_OXNAS + select VERSATILE_FPGA_IRQ select PINCTRL - depends on ARCH_MULTI_V5 + depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 help Support for OxNas SoC family developed by Oxford Semiconductor. @@ -11,16 +18,21 @@ if ARCH_OXNAS config MACH_OX810SE bool "Support OX810SE Based Products" - select ARCH_HAS_RESET_CONTROLLER - select COMMON_CLK_OXNAS + depends on ARCH_MULTI_V5 select CPU_ARM926T - select MFD_SYSCON - select OXNAS_RPS_TIMER - select PINCTRL_OXNAS - select RESET_CONTROLLER - select RESET_OXNAS - select VERSATILE_FPGA_IRQ help Include Support for the Oxford Semiconductor OX810SE SoC Based Products. +config MACH_OX820 + bool "Support OX820 Based Products" + depends on ARCH_MULTI_V6 + select ARM_GIC + select DMA_CACHE_RWFO if SMP + select CPU_V6K + select HAVE_SMP + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + help + Include Support for the Oxford Semiconductor OX820 SoC Based Products. + endif diff --git a/arch/arm/mach-oxnas/Makefile b/arch/arm/mach-oxnas/Makefile new file mode 100644 index 000000000000..b625906a9970 --- /dev/null +++ b/arch/arm/mach-oxnas/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-oxnas/headsmp.S b/arch/arm/mach-oxnas/headsmp.S new file mode 100644 index 000000000000..25fd4f82ab3a --- /dev/null +++ b/arch/arm/mach-oxnas/headsmp.S @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com> + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> + + __INIT + +/* + * OX820 specific entry point for secondary CPUs. + */ +ENTRY(ox820_secondary_startup) + mov r4, #0 + /* invalidate both caches and branch target cache */ + mcr p15, 0, r4, c7, c7, 0 + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup diff --git a/arch/arm/mach-oxnas/hotplug.c b/arch/arm/mach-oxnas/hotplug.c new file mode 100644 index 000000000000..854f29b8cba6 --- /dev/null +++ b/arch/arm/mach-oxnas/hotplug.c @@ -0,0 +1,109 @@ +/* + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/smp.h> + +#include <asm/cp15.h> +#include <asm/smp_plat.h> + +static inline void cpu_enter_lowpower(void) +{ + unsigned int v; + + asm volatile( + " mcr p15, 0, %1, c7, c5, 0\n" + " mcr p15, 0, %1, c7, c10, 4\n" + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, #0x20\n" + " mcr p15, 0, %0, c1, c0, 1\n" + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "r" (0), "Ir" (CR_C) + : "cc"); +} + +static inline void cpu_leave_lowpower(void) +{ + unsigned int v; + + asm volatile( "mrc p15, 0, %0, c1, c0, 0\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 0\n" + " mrc p15, 0, %0, c1, c0, 1\n" + " orr %0, %0, #0x20\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : "Ir" (CR_C) + : "cc"); +} + +static inline void platform_do_lowpower(unsigned int cpu, int *spurious) +{ + /* + * there is no power-control hardware on this platform, so all + * we can do is put the core into WFI; this is safe as the calling + * code will have already disabled interrupts + */ + for (;;) { + /* + * here's the WFI + */ + asm(".word 0xe320f003\n" + : + : + : "memory", "cc"); + + if (pen_release == cpu_logical_map(cpu)) { + /* + * OK, proper wakeup, we're done + */ + break; + } + + /* + * Getting here, means that we have come out of WFI without + * having been woken up - this shouldn't happen + * + * Just note it happening - when we're woken, we can report + * its occurrence. + */ + (*spurious)++; + } +} + +/* + * platform-specific code to shutdown a CPU + * + * Called with IRQs disabled + */ +void ox820_cpu_die(unsigned int cpu) +{ + int spurious = 0; + + /* + * we're ready for shutdown now, so do it + */ + cpu_enter_lowpower(); + platform_do_lowpower(cpu, &spurious); + + /* + * bring this CPU back into the world of cache + * coherency, and then restore interrupts + */ + cpu_leave_lowpower(); + + if (spurious) + pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious); +} diff --git a/arch/arm/mach-oxnas/platsmp.c b/arch/arm/mach-oxnas/platsmp.c new file mode 100644 index 000000000000..442cc8a2f7dc --- /dev/null +++ b/arch/arm/mach-oxnas/platsmp.c @@ -0,0 +1,102 @@ +/* + * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> + * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com> + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include <asm/cacheflush.h> +#include <asm/cp15.h> +#include <asm/smp_plat.h> +#include <asm/smp_scu.h> + +extern void ox820_secondary_startup(void); +extern void ox820_cpu_die(unsigned int cpu); + +static void __iomem *cpu_ctrl; +static void __iomem *gic_cpu_ctrl; + +#define HOLDINGPEN_CPU_OFFSET 0xc8 +#define HOLDINGPEN_LOCATION_OFFSET 0xc4 + +#define GIC_NCPU_OFFSET(cpu) (0x100 + (cpu)*0x100) +#define GIC_CPU_CTRL 0x00 +#define GIC_CPU_CTRL_ENABLE 1 + +int __init ox820_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + /* + * Write the address of secondary startup into the + * system-wide flags register. The BootMonitor waits + * until it receives a soft interrupt, and then the + * secondary CPU branches to this address. + */ + writel(virt_to_phys(ox820_secondary_startup), + cpu_ctrl + HOLDINGPEN_LOCATION_OFFSET); + + writel(cpu, cpu_ctrl + HOLDINGPEN_CPU_OFFSET); + + /* + * Enable GIC cpu interface in CPU Interface Control Register + */ + writel(GIC_CPU_CTRL_ENABLE, + gic_cpu_ctrl + GIC_NCPU_OFFSET(cpu) + GIC_CPU_CTRL); + + /* + * Send the secondary CPU a soft interrupt, thereby causing + * the boot monitor to read the system wide flags register, + * and branch to the address found there. + */ + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + + return 0; +} + +static void __init ox820_smp_prepare_cpus(unsigned int max_cpus) +{ + struct device_node *np; + void __iomem *scu_base; + + np = of_find_compatible_node(NULL, NULL, "arm,arm11mp-scu"); + scu_base = of_iomap(np, 0); + of_node_put(np); + if (!scu_base) + return; + + /* Remap CPU Interrupt Interface Registers */ + np = of_find_compatible_node(NULL, NULL, "arm,arm11mp-gic"); + gic_cpu_ctrl = of_iomap(np, 1); + of_node_put(np); + if (!gic_cpu_ctrl) + goto unmap_scu; + + np = of_find_compatible_node(NULL, NULL, "oxsemi,ox820-sys-ctrl"); + cpu_ctrl = of_iomap(np, 0); + of_node_put(np); + if (!cpu_ctrl) + goto unmap_scu; + + scu_enable(scu_base); + flush_cache_all(); + +unmap_scu: + iounmap(scu_base); +} + +static const struct smp_operations ox820_smp_ops __initconst = { + .smp_prepare_cpus = ox820_smp_prepare_cpus, + .smp_boot_secondary = ox820_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = ox820_cpu_die, +#endif +}; + +CPU_METHOD_OF_DECLARE(ox820_smp, "oxsemi,ox820-smp", &ox820_smp_ops); diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 10bfdb169366..183cd3446f25 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -35,7 +35,6 @@ #include <linux/mtd/sharpsl.h> #include <linux/input/matrix_keypad.h> #include <linux/gpio_keys.h> -#include <linux/module.h> #include <linux/memblock.h> #include <video/w100fb.h> diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 03354c21e1f2..811a7317f3ea 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -23,6 +23,7 @@ #include <linux/gpio.h> #include <linux/mfd/da903x.h> #include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <linux/spi/spi.h> #include <linux/spi/tdo24m.h> #include <linux/spi/libertas_spi.h> @@ -34,8 +35,6 @@ #include <linux/i2c/pxa-i2c.h> #include <linux/regulator/userspace-consumer.h> -#include <media/soc_camera.h> - #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -958,8 +957,6 @@ static inline void em_x270_init_gpio_keys(void) {} /* Quick Capture Interface and sensor setup */ #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) -static struct regulator *em_x270_camera_ldo; - static int em_x270_sensor_init(void) { int ret; @@ -969,81 +966,53 @@ static int em_x270_sensor_init(void) return ret; gpio_direction_output(cam_reset, 0); - - em_x270_camera_ldo = regulator_get(NULL, "vcc cam"); - if (em_x270_camera_ldo == NULL) { - gpio_free(cam_reset); - return -ENODEV; - } - - ret = regulator_enable(em_x270_camera_ldo); - if (ret) { - regulator_put(em_x270_camera_ldo); - gpio_free(cam_reset); - return ret; - } - gpio_set_value(cam_reset, 1); return 0; } -struct pxacamera_platform_data em_x270_camera_platform_data = { - .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | - PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, - .mclk_10khz = 2600, +static struct regulator_consumer_supply camera_dummy_supplies[] = { + REGULATOR_SUPPLY("vdd", "0-005d"), }; -static int em_x270_sensor_power(struct device *dev, int on) -{ - int ret; - int is_on = regulator_is_enabled(em_x270_camera_ldo); - - if (on == is_on) - return 0; - - gpio_set_value(cam_reset, !on); - - if (on) - ret = regulator_enable(em_x270_camera_ldo); - else - ret = regulator_disable(em_x270_camera_ldo); - - if (ret) - return ret; - - gpio_set_value(cam_reset, on); - - return 0; -} - -static struct i2c_board_info em_x270_i2c_cam_info[] = { - { - I2C_BOARD_INFO("mt9m111", 0x48), +static struct regulator_init_data camera_dummy_initdata = { + .consumer_supplies = camera_dummy_supplies, + .num_consumer_supplies = ARRAY_SIZE(camera_dummy_supplies), + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, }; -static struct soc_camera_link iclink = { - .bus_id = 0, - .power = em_x270_sensor_power, - .board_info = &em_x270_i2c_cam_info[0], - .i2c_adapter_id = 0, +static struct fixed_voltage_config camera_dummy_config = { + .supply_name = "camera_vdd", + .input_supply = "vcc cam", + .microvolts = 2800000, + .gpio = -1, + .enable_high = 0, + .init_data = &camera_dummy_initdata, }; -static struct platform_device em_x270_camera = { - .name = "soc-camera-pdrv", - .id = -1, +static struct platform_device camera_supply_dummy_device = { + .name = "reg-fixed-voltage", + .id = 1, .dev = { - .platform_data = &iclink, + .platform_data = &camera_dummy_config, }, }; +struct pxacamera_platform_data em_x270_camera_platform_data = { + .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | + PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, + .mclk_10khz = 2600, + .sensor_i2c_adapter_id = 0, + .sensor_i2c_address = 0x5d, +}; + static void __init em_x270_init_camera(void) { - if (em_x270_sensor_init() == 0) { + if (em_x270_sensor_init() == 0) pxa_set_camera_info(&em_x270_camera_platform_data); - platform_device_register(&em_x270_camera); - } + platform_device_register(&camera_supply_dummy_device); } #else static inline void em_x270_init_camera(void) {} diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 34ad0a89d4a9..0b8300e6fca3 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -17,14 +17,14 @@ #include <linux/delay.h> #include <linux/pwm.h> #include <linux/pwm_backlight.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <linux/input.h> #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/leds-lp3944.h> #include <linux/i2c/pxa-i2c.h> -#include <media/soc_camera.h> - #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -723,6 +723,42 @@ static struct platform_device a780_gpio_keys = { }; /* camera */ +static struct regulator_consumer_supply camera_dummy_supplies[] = { + REGULATOR_SUPPLY("vdd", "0-005d"), +}; + +static struct regulator_init_data camera_dummy_initdata = { + .consumer_supplies = camera_dummy_supplies, + .num_consumer_supplies = ARRAY_SIZE(camera_dummy_supplies), + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +static struct fixed_voltage_config camera_dummy_config = { + .supply_name = "camera_vdd", + .microvolts = 2800000, + .gpio = GPIO50_nCAM_EN, + .enable_high = 0, + .init_data = &camera_dummy_initdata, +}; + +static struct platform_device camera_supply_dummy_device = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &camera_dummy_config, + }, +}; +static int a780_camera_reset(struct device *dev) +{ + gpio_set_value(GPIO19_GEN1_CAM_RST, 0); + msleep(10); + gpio_set_value(GPIO19_GEN1_CAM_RST, 1); + + return 0; +} + static int a780_camera_init(void) { int err; @@ -731,73 +767,36 @@ static int a780_camera_init(void) * GPIO50_nCAM_EN is active low * GPIO19_GEN1_CAM_RST is active on rising edge */ - err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN"); - if (err) { - pr_err("%s: Failed to request nCAM_EN\n", __func__); - goto fail; - } - err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST"); if (err) { pr_err("%s: Failed to request CAM_RST\n", __func__); - goto fail_gpio_cam_rst; + return err; } - gpio_direction_output(GPIO50_nCAM_EN, 1); gpio_direction_output(GPIO19_GEN1_CAM_RST, 0); - - return 0; - -fail_gpio_cam_rst: - gpio_free(GPIO50_nCAM_EN); -fail: - return err; -} - -static int a780_camera_power(struct device *dev, int on) -{ - gpio_set_value(GPIO50_nCAM_EN, !on); - return 0; -} - -static int a780_camera_reset(struct device *dev) -{ - gpio_set_value(GPIO19_GEN1_CAM_RST, 0); - msleep(10); - gpio_set_value(GPIO19_GEN1_CAM_RST, 1); + a780_camera_reset(NULL); return 0; } struct pxacamera_platform_data a780_pxacamera_platform_data = { .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | - PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, + PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN | + PXA_CAMERA_PCP, .mclk_10khz = 5000, + .sensor_i2c_adapter_id = 0, + .sensor_i2c_address = 0x5d, }; -static struct i2c_board_info a780_camera_i2c_board_info = { - I2C_BOARD_INFO("mt9m111", 0x5d), -}; - -static struct soc_camera_link a780_iclink = { - .bus_id = 0, - .flags = SOCAM_SENSOR_INVERT_PCLK, - .i2c_adapter_id = 0, - .board_info = &a780_camera_i2c_board_info, - .power = a780_camera_power, - .reset = a780_camera_reset, -}; - -static struct platform_device a780_camera = { - .name = "soc-camera-pdrv", - .id = 0, - .dev = { - .platform_data = &a780_iclink, +static struct i2c_board_info a780_i2c_board_info[] = { + { + I2C_BOARD_INFO("mt9m111", 0x5d), }, }; static struct platform_device *a780_devices[] __initdata = { &a780_gpio_keys, + &camera_supply_dummy_device, }; static void __init a780_init(void) @@ -811,19 +810,19 @@ static void __init a780_init(void) pxa_set_stuart_info(NULL); pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(a780_i2c_board_info)); pxa_set_fb_info(NULL, &ezx_fb_info_1); pxa_set_keypad_info(&a780_keypad_platform_data); - if (a780_camera_init() == 0) { + if (a780_camera_init() == 0) pxa_set_camera_info(&a780_pxacamera_platform_data); - platform_device_register(&a780_camera); - } pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup)); platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); platform_add_devices(ARRAY_AND_SIZE(a780_devices)); + regulator_has_full_constraints(); } MACHINE_START(EZX_A780, "Motorola EZX A780") @@ -1001,6 +1000,15 @@ static struct platform_device a910_gpio_keys = { }; /* camera */ +static int a910_camera_reset(struct device *dev) +{ + gpio_set_value(GPIO28_GEN2_CAM_RST, 0); + msleep(10); + gpio_set_value(GPIO28_GEN2_CAM_RST, 1); + + return 0; +} + static int a910_camera_init(void) { int err; @@ -1009,68 +1017,25 @@ static int a910_camera_init(void) * GPIO50_nCAM_EN is active low * GPIO28_GEN2_CAM_RST is active on rising edge */ - err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN"); - if (err) { - pr_err("%s: Failed to request nCAM_EN\n", __func__); - goto fail; - } - err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST"); if (err) { pr_err("%s: Failed to request CAM_RST\n", __func__); - goto fail_gpio_cam_rst; + return err; } - gpio_direction_output(GPIO50_nCAM_EN, 1); gpio_direction_output(GPIO28_GEN2_CAM_RST, 0); - - return 0; - -fail_gpio_cam_rst: - gpio_free(GPIO50_nCAM_EN); -fail: - return err; -} - -static int a910_camera_power(struct device *dev, int on) -{ - gpio_set_value(GPIO50_nCAM_EN, !on); - return 0; -} - -static int a910_camera_reset(struct device *dev) -{ - gpio_set_value(GPIO28_GEN2_CAM_RST, 0); - msleep(10); - gpio_set_value(GPIO28_GEN2_CAM_RST, 1); + a910_camera_reset(NULL); return 0; } struct pxacamera_platform_data a910_pxacamera_platform_data = { .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | - PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, + PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN | + PXA_CAMERA_PCP, .mclk_10khz = 5000, -}; - -static struct i2c_board_info a910_camera_i2c_board_info = { - I2C_BOARD_INFO("mt9m111", 0x5d), -}; - -static struct soc_camera_link a910_iclink = { - .bus_id = 0, - .i2c_adapter_id = 0, - .board_info = &a910_camera_i2c_board_info, - .power = a910_camera_power, - .reset = a910_camera_reset, -}; - -static struct platform_device a910_camera = { - .name = "soc-camera-pdrv", - .id = 0, - .dev = { - .platform_data = &a910_iclink, - }, + .sensor_i2c_adapter_id = 0, + .sensor_i2c_address = 0x5d, }; /* leds-lp3944 */ @@ -1122,10 +1087,14 @@ static struct i2c_board_info __initdata a910_i2c_board_info[] = { I2C_BOARD_INFO("lp3944", 0x60), .platform_data = &a910_lp3944_leds, }, + { + I2C_BOARD_INFO("mt9m111", 0x5d), + }, }; static struct platform_device *a910_devices[] __initdata = { &a910_gpio_keys, + &camera_supply_dummy_device, }; static void __init a910_init(void) @@ -1145,14 +1114,13 @@ static void __init a910_init(void) pxa_set_keypad_info(&a910_keypad_platform_data); - if (a910_camera_init() == 0) { + if (a910_camera_init() == 0) pxa_set_camera_info(&a910_pxacamera_platform_data); - platform_device_register(&a910_camera); - } pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup)); platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); platform_add_devices(ARRAY_AND_SIZE(a910_devices)); + regulator_has_full_constraints(); } MACHINE_START(EZX_A910, "Motorola EZX A910") diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index ec510ecf8370..cb73a9723d0e 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -43,21 +43,6 @@ void clear_reset_status(unsigned int mask) } } -unsigned long get_clock_tick_rate(void) -{ - unsigned long clock_tick_rate; - - if (cpu_is_pxa25x()) - clock_tick_rate = 3686400; - else if (machine_is_mainstone()) - clock_tick_rate = 3249600; - else - clock_tick_rate = 3250000; - - return clock_tick_rate; -} -EXPORT_SYMBOL(get_clock_tick_rate); - /* * For non device-tree builds, keep legacy timer init */ @@ -69,8 +54,7 @@ void __init pxa_timer_init(void) pxa27x_clocks_init(); if (cpu_is_pxa3xx()) pxa3xx_clocks_init(); - pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000), - get_clock_tick_rate()); + pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000)); } /* diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 66070acaa888..d1db32b1a2c6 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -85,6 +85,7 @@ static struct resource smc91x_resources[] = { static struct smc91x_platdata smc91x_platdata = { .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | SMC91X_USE_DMA | SMC91X_NOWAIT, + .pxa_u16_align4 = true, }; static struct platform_device smc91x_device = { diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index 8d63c211b22f..55064124ca4e 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -303,8 +303,6 @@ */ extern unsigned int get_memclk_frequency_10khz(void); -/* return the clock tick rate of the OS timer */ -extern unsigned long get_clock_tick_rate(void); #endif #endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 40964069a17c..a2d851a3a546 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -140,6 +140,7 @@ static struct resource smc91x_resources[] = { static struct smc91x_platdata mainstone_smc91x_info = { .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA, + .pxa_u16_align4 = true, }; static struct platform_device smc91x_device = { diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 38a96a193dc4..8a5d0491e73c 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -57,7 +57,6 @@ #include <linux/platform_data/media/camera-pxa.h> #include <mach/audio.h> #include <mach/smemc.h> -#include <media/soc_camera.h> #include "mioa701.h" @@ -627,6 +626,8 @@ struct pxacamera_platform_data mioa701_pxacamera_platform_data = { .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, .mclk_10khz = 5000, + .sensor_i2c_adapter_id = 0, + .sensor_i2c_address = 0x5d, }; static struct i2c_board_info __initdata mioa701_pi2c_devices[] = { @@ -643,12 +644,6 @@ static struct i2c_board_info mioa701_i2c_devices[] = { }, }; -static struct soc_camera_link iclink = { - .bus_id = 0, /* Match id in pxa27x_device_camera in device.c */ - .board_info = &mioa701_i2c_devices[0], - .i2c_adapter_id = 0, -}; - struct i2c_pxa_platform_data i2c_pdata = { .fast_mode = 1, }; @@ -684,7 +679,6 @@ MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL) MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL) MIO_SIMPLE_DEV(wm9713_acodec, "wm9713-codec", NULL); MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data); -MIO_SIMPLE_DEV(mioa701_camera, "soc-camera-pdrv",&iclink); static struct platform_device *devices[] __initdata = { &mioa701_gpio_keys, @@ -696,7 +690,6 @@ static struct platform_device *devices[] __initdata = { &power_dev, &docg3, &gpio_vbus, - &mioa701_camera, &mioa701_board, }; @@ -761,6 +754,7 @@ static void __init mioa701_machine_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); gsm_init(); + i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices)); i2c_register_board_info(1, ARRAY_AND_SIZE(mioa701_pi2c_devices)); pxa_set_i2c_info(&i2c_pdata); pxa27x_set_i2c_power_info(NULL); @@ -769,6 +763,7 @@ static void __init mioa701_machine_init(void) regulator_register_always_on(0, "fixed-5.0V", fixed_5v0_consumers, ARRAY_SIZE(fixed_5v0_consumers), 5000000); + regulator_has_full_constraints(); } static void mioa701_machine_exit(void) diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 12b94357fbc1..c725baf119e1 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -156,7 +156,7 @@ static int __init __init pxa25x_dt_init_irq(struct device_node *node, struct device_node *parent) { pxa_dt_irq_init(pxa25x_set_wake); - set_handle_irq(ichp_handle_irq); + set_handle_irq(icip_handle_irq); return 0; } diff --git a/arch/arm/mach-pxa/pxa_cplds_irqs.c b/arch/arm/mach-pxa/pxa_cplds_irqs.c index e362f865fcd2..941508585e34 100644 --- a/arch/arm/mach-pxa/pxa_cplds_irqs.c +++ b/arch/arm/mach-pxa/pxa_cplds_irqs.c @@ -120,13 +120,9 @@ static int cplds_probe(struct platform_device *pdev) if (!fpga) return -ENOMEM; - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (res) { - fpga->irq = (unsigned int)res->start; - irqflags = res->flags; - } - if (!fpga->irq) - return -ENODEV; + fpga->irq = platform_get_irq(pdev, 0); + if (fpga->irq <= 0) + return fpga->irq; base_irq = platform_get_irq(pdev, 1); if (base_irq < 0) @@ -142,6 +138,7 @@ static int cplds_probe(struct platform_device *pdev) writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN); writel(0, fpga->base + FPGA_IRQ_SET_CLR); + irqflags = irq_get_trigger_type(fpga->irq); ret = devm_request_irq(&pdev->dev, fpga->irq, cplds_irq_handler, irqflags, dev_name(&pdev->dev), fpga); if (ret == -ENOSYS) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 2c150bfc0cd5..67d66c702574 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -31,7 +31,6 @@ #include <linux/input/matrix_keypad.h> #include <linux/regulator/machine.h> #include <linux/io.h> -#include <linux/module.h> #include <linux/reboot.h> #include <linux/memblock.h> diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 702f4f14b708..7b6610e9dae4 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -673,6 +673,7 @@ static struct resource smc91x_resources[] = { static struct smc91x_platdata stargate2_smc91x_info = { .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA, + .pxa_u16_align4 = true, }; static struct platform_device smc91x_device = { diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c index 89c5a62830a7..261820a855ec 100644 --- a/arch/arm/mach-s3c64xx/pl080.c +++ b/arch/arm/mach-s3c64xx/pl080.c @@ -117,6 +117,25 @@ static struct pl08x_channel_data s3c64xx_dma0_info[] = { } }; +static const struct dma_slave_map s3c64xx_dma0_slave_map[] = { + { "s3c6400-uart.0", "tx", &s3c64xx_dma0_info[0] }, + { "s3c6400-uart.0", "rx", &s3c64xx_dma0_info[1] }, + { "s3c6400-uart.1", "tx", &s3c64xx_dma0_info[2] }, + { "s3c6400-uart.1", "rx", &s3c64xx_dma0_info[3] }, + { "s3c6400-uart.2", "tx", &s3c64xx_dma0_info[4] }, + { "s3c6400-uart.2", "rx", &s3c64xx_dma0_info[5] }, + { "s3c6400-uart.3", "tx", &s3c64xx_dma0_info[6] }, + { "s3c6400-uart.3", "rx", &s3c64xx_dma0_info[7] }, + { "samsung-pcm.0", "tx", &s3c64xx_dma0_info[8] }, + { "samsung-pcm.0", "rx", &s3c64xx_dma0_info[9] }, + { "samsung-i2s.0", "tx", &s3c64xx_dma0_info[10] }, + { "samsung-i2s.0", "rx", &s3c64xx_dma0_info[11] }, + { "s3c6410-spi.0", "tx", &s3c64xx_dma0_info[12] }, + { "s3c6410-spi.0", "rx", &s3c64xx_dma0_info[13] }, + { "samsung-i2s.2", "tx", &s3c64xx_dma0_info[14] }, + { "samsung-i2s.2", "rx", &s3c64xx_dma0_info[15] }, +}; + struct pl08x_platform_data s3c64xx_dma0_plat_data = { .memcpy_channel = { .bus_id = "memcpy", @@ -134,6 +153,8 @@ struct pl08x_platform_data s3c64xx_dma0_plat_data = { .put_xfer_signal = pl08x_put_xfer_signal, .slave_channels = s3c64xx_dma0_info, .num_slave_channels = ARRAY_SIZE(s3c64xx_dma0_info), + .slave_map = s3c64xx_dma0_slave_map, + .slave_map_len = ARRAY_SIZE(s3c64xx_dma0_slave_map), }; static AMBA_AHB_DEVICE(s3c64xx_dma0, "dma-pl080s.0", 0, @@ -207,6 +228,15 @@ static struct pl08x_channel_data s3c64xx_dma1_info[] = { }, }; +static const struct dma_slave_map s3c64xx_dma1_slave_map[] = { + { "samsung-pcm.1", "tx", &s3c64xx_dma1_info[0] }, + { "samsung-pcm.1", "rx", &s3c64xx_dma1_info[1] }, + { "samsung-i2s.1", "tx", &s3c64xx_dma1_info[2] }, + { "samsung-i2s.1", "rx", &s3c64xx_dma1_info[3] }, + { "s3c6410-spi.1", "tx", &s3c64xx_dma1_info[4] }, + { "s3c6410-spi.1", "rx", &s3c64xx_dma1_info[5] }, +}; + struct pl08x_platform_data s3c64xx_dma1_plat_data = { .memcpy_channel = { .bus_id = "memcpy", @@ -224,6 +254,8 @@ struct pl08x_platform_data s3c64xx_dma1_plat_data = { .put_xfer_signal = pl08x_put_xfer_signal, .slave_channels = s3c64xx_dma1_info, .num_slave_channels = ARRAY_SIZE(s3c64xx_dma1_info), + .slave_map = s3c64xx_dma1_slave_map, + .slave_map_len = ARRAY_SIZE(s3c64xx_dma1_slave_map), }; static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0, diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 3e09beddb6e8..2eb00691b07d 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -378,7 +378,7 @@ void __init sa1100_map_io(void) void __init sa1100_timer_init(void) { - pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x90000000), 3686400); + pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x90000000)); } static struct resource irq_resource = diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h index d944fd7e464f..52b8f6d25bef 100644 --- a/arch/arm/mach-sa1100/include/mach/hardware.h +++ b/arch/arm/mach-sa1100/include/mach/hardware.h @@ -43,10 +43,6 @@ # define __REG(x) (*((volatile unsigned long __iomem *)io_p2v(x))) # define __PREG(x) (io_v2p((unsigned long)&(x))) -static inline unsigned long get_clock_tick_rate(void) -{ - return 3686400; -} #else # define __REG(x) io_p2v(x) diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 09817bae4558..f0b5e7dfa6d0 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -32,15 +32,15 @@ config ARCH_RMOBILE menuconfig ARCH_RENESAS bool "Renesas ARM SoCs" depends on ARCH_MULTI_V7 && MMU + select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select ARCH_SHMOBILE select ARCH_SHMOBILE_MULTI + select ARM_GIC + select GPIOLIB select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select ARM_GIC - select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select NO_IOPORT_MAP select PINCTRL - select GPIOLIB select ZONE_DMA if ARM_LPAE if ARCH_RENESAS @@ -60,6 +60,7 @@ config ARCH_R7S72100 config ARCH_R8A73A4 bool "R-Mobile APE6 (R8A73A40)" select ARCH_RMOBILE + select ARM_ERRATA_798181 if SMP select RENESAS_IRQC config ARCH_R8A7740 @@ -67,6 +68,15 @@ config ARCH_R8A7740 select ARCH_RMOBILE select RENESAS_INTC_IRQPIN +config ARCH_R8A7743 + bool "RZ/G1M (R8A77430)" + select ARCH_RCAR_GEN2 + select ARM_ERRATA_798181 if SMP + +config ARCH_R8A7745 + bool "RZ/G1E (R8A77450)" + select ARCH_RCAR_GEN2 + config ARCH_R8A7778 bool "R-Car M1A (R8A77781)" select ARCH_RCAR_GEN1 @@ -78,20 +88,24 @@ config ARCH_R8A7779 config ARCH_R8A7790 bool "R-Car H2 (R8A77900)" select ARCH_RCAR_GEN2 + select ARM_ERRATA_798181 if SMP select I2C config ARCH_R8A7791 bool "R-Car M2-W (R8A77910)" select ARCH_RCAR_GEN2 + select ARM_ERRATA_798181 if SMP select I2C config ARCH_R8A7792 bool "R-Car V2H (R8A77920)" select ARCH_RCAR_GEN2 + select ARM_ERRATA_798181 if SMP config ARCH_R8A7793 bool "R-Car M2-N (R8A7793)" select ARCH_RCAR_GEN2 + select ARM_ERRATA_798181 if SMP select I2C config ARCH_R8A7794 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 3fc48b02eb4f..64611a1b4276 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -13,9 +13,6 @@ obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o pm-r8a7779.o obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o -obj-$(CONFIG_ARCH_R8A7792) += setup-r8a7792.o -obj-$(CONFIG_ARCH_R8A7793) += setup-r8a7793.o -obj-$(CONFIG_ARCH_R8A7794) += setup-r8a7794.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index cf236db686a9..7fa4a0b5f654 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -15,7 +15,6 @@ * GNU General Public License for more details. */ -#include <linux/clk/renesas.h> #include <linux/io.h> #include <linux/irqchip.h> @@ -23,19 +22,6 @@ #include "common.h" -#define MODEMR 0xffcc0020 - -static void __init r8a7778_timer_init(void) -{ - u32 mode; - void __iomem *modemr = ioremap_nocache(MODEMR, 4); - - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); - r8a7778_clocks_init(mode); -} - #define INT2SMSKCR0 0x82288 /* 0xfe782288 */ #define INT2SMSKCR1 0x8228c /* 0xfe78228c */ @@ -70,6 +56,5 @@ DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)") .init_early = shmobile_init_delay, .init_irq = r8a7778_init_irq_dt, .init_late = shmobile_init_late, - .init_time = r8a7778_timer_init, .dt_compat = r8a7778_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 0007ff51d180..0686112f2435 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -14,8 +14,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ -#include <linux/clk/renesas.h> -#include <linux/clocksource.h> #include <linux/init.h> #include <linux/irq.h> #include <linux/irqchip.h> @@ -76,30 +74,6 @@ static void __init r8a7779_init_irq_dt(void) __raw_writel(0x003fee3f, INT2SMSKCR4); } -#define MODEMR 0xffcc0020 - -static u32 __init r8a7779_read_mode_pins(void) -{ - static u32 mode; - static bool mode_valid; - - if (!mode_valid) { - void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE); - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); - mode_valid = true; - } - - return mode; -} - -static void __init r8a7779_init_time(void) -{ - r8a7779_clocks_init(r8a7779_read_mode_pins()); - clocksource_probe(); -} - static const char *const r8a7779_compat_dt[] __initconst = { "renesas,r8a7779", NULL, @@ -109,7 +83,6 @@ DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)") .smp = smp_ops(r8a7779_smp_ops), .map_io = r8a7779_map_io, .init_early = shmobile_init_delay, - .init_time = r8a7779_init_time, .init_irq = r8a7779_init_irq_dt, .init_late = shmobile_init_late, .dt_compat = r8a7779_compat_dt, diff --git a/arch/arm/mach-shmobile/setup-r8a7792.c b/arch/arm/mach-shmobile/setup-r8a7792.c deleted file mode 100644 index a0910395da09..000000000000 --- a/arch/arm/mach-shmobile/setup-r8a7792.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * r8a7792 processor support - * - * Copyright (C) 2014 Renesas Electronics Corporation - * Copyright (C) 2016 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/of_platform.h> - -#include <asm/mach/arch.h> - -#include "common.h" -#include "rcar-gen2.h" - -static const char * const r8a7792_boards_compat_dt[] __initconst = { - "renesas,r8a7792", - NULL, -}; - -DT_MACHINE_START(R8A7792_DT, "Generic R8A7792 (Flattened Device Tree)") - .init_early = shmobile_init_delay, - .init_late = shmobile_init_late, - .init_time = rcar_gen2_timer_init, - .reserve = rcar_gen2_reserve, - .dt_compat = r8a7792_boards_compat_dt, -MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a7793.c b/arch/arm/mach-shmobile/setup-r8a7793.c deleted file mode 100644 index 5fce87f7f254..000000000000 --- a/arch/arm/mach-shmobile/setup-r8a7793.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * r8a7793 processor support - * - * Copyright (C) 2015 Ulrich Hecht - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/init.h> -#include <asm/mach/arch.h> - -#include "common.h" -#include "rcar-gen2.h" - -static const char * const r8a7793_boards_compat_dt[] __initconst = { - "renesas,r8a7793", - NULL, -}; - -DT_MACHINE_START(R8A7793_DT, "Generic R8A7793 (Flattened Device Tree)") - .init_early = shmobile_init_delay, - .init_time = rcar_gen2_timer_init, - .init_late = shmobile_init_late, - .reserve = rcar_gen2_reserve, - .dt_compat = r8a7793_boards_compat_dt, -MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a7794.c b/arch/arm/mach-shmobile/setup-r8a7794.c deleted file mode 100644 index d2b093033132..000000000000 --- a/arch/arm/mach-shmobile/setup-r8a7794.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * r8a7794 processor support - * - * Copyright (C) 2014 Renesas Electronics Corporation - * Copyright (C) 2014 Ulrich Hecht - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/of_platform.h> -#include "common.h" -#include "rcar-gen2.h" -#include <asm/mach/arch.h> - -static const char * const r8a7794_boards_compat_dt[] __initconst = { - "renesas,r8a7794", - NULL, -}; - -DT_MACHINE_START(R8A7794_DT, "Generic R8A7794 (Flattened Device Tree)") - .init_early = shmobile_init_delay, - .init_late = shmobile_init_late, - .init_time = rcar_gen2_timer_init, - .reserve = rcar_gen2_reserve, - .dt_compat = r8a7794_boards_compat_dt, -MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index afb9fdcd3d90..ac63fa407b64 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -15,7 +15,7 @@ * GNU General Public License for more details. */ -#include <linux/clk/renesas.h> +#include <linux/clk-provider.h> #include <linux/clocksource.h> #include <linux/device.h> #include <linux/dma-contiguous.h> @@ -24,6 +24,7 @@ #include <linux/memblock.h> #include <linux/of.h> #include <linux/of_fdt.h> +#include <linux/of_platform.h> #include <asm/mach/arch.h> #include "common.h" #include "rcar-gen2.h" @@ -71,7 +72,6 @@ static unsigned int __init get_extal_freq(void) void __init rcar_gen2_timer_init(void) { - u32 mode = rcar_gen2_read_mode_pins(); #ifdef CONFIG_ARM_ARCH_TIMER void __iomem *base; u32 freq; @@ -130,7 +130,7 @@ void __init rcar_gen2_timer_init(void) iounmap(base); #endif /* CONFIG_ARM_ARCH_TIMER */ - rcar_gen2_clocks_init(mode); + of_clk_init(NULL); clocksource_probe(); } @@ -203,3 +203,36 @@ void __init rcar_gen2_reserve(void) } #endif } + +static const char * const rcar_gen2_boards_compat_dt[] __initconst = { + /* + * R8A7790 and R8A7791 can't be handled here as long as they need SMP + * initialization fallback. + */ + "renesas,r8a7792", + "renesas,r8a7793", + "renesas,r8a7794", + NULL, +}; + +DT_MACHINE_START(RCAR_GEN2_DT, "Generic R-Car Gen2 (Flattened Device Tree)") + .init_early = shmobile_init_delay, + .init_late = shmobile_init_late, + .init_time = rcar_gen2_timer_init, + .reserve = rcar_gen2_reserve, + .dt_compat = rcar_gen2_boards_compat_dt, +MACHINE_END + +static const char * const rz_g1_boards_compat_dt[] __initconst = { + "renesas,r8a7743", + "renesas,r8a7745", + NULL, +}; + +DT_MACHINE_START(RZ_G1_DT, "Generic RZ/G1 (Flattened Device Tree)") + .init_early = shmobile_init_delay, + .init_late = shmobile_init_late, + .init_time = rcar_gen2_timer_init, + .reserve = rcar_gen2_reserve, + .dt_compat = rz_g1_boards_compat_dt, +MACHINE_END diff --git a/arch/arm/mach-socfpga/l2_cache.c b/arch/arm/mach-socfpga/l2_cache.c index 4267c95f2158..bb359d727b34 100644 --- a/arch/arm/mach-socfpga/l2_cache.c +++ b/arch/arm/mach-socfpga/l2_cache.c @@ -74,7 +74,7 @@ void socfpga_init_arria10_l2_ecc(void) } if (!sys_manager_base_addr) { - pr_err("System Mananger not mapped for L2 ECC\n"); + pr_err("System Manager not mapped for L2 ECC\n"); goto exit; } /* Clear any pending IRQs */ diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c index 9ccffc1d0f28..4878ba90026d 100644 --- a/arch/arm/mach-spear/time.c +++ b/arch/arm/mach-spear/time.c @@ -233,7 +233,7 @@ void __init spear_setup_of_timer(void) } gpt_clk = clk_get_sys("gpt0", NULL); - if (!gpt_clk) { + if (IS_ERR(gpt_clk)) { pr_err("%s:couldn't get clk for gpt\n", __func__); goto err_iomap; } diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c index ceee47735eec..c354222a4158 100644 --- a/arch/arm/mach-stm32/board-dt.c +++ b/arch/arm/mach-stm32/board-dt.c @@ -11,6 +11,7 @@ static const char *const stm32_compat[] __initconst = { "st,stm32f429", "st,stm32f469", + "st,stm32f746", NULL }; diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index 82dddee3a469..3930fbba30b4 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -1,6 +1,7 @@ config ARCH_UNIPHIER bool "Socionext UniPhier SoCs" depends on ARCH_MULTI_V7 + select ARCH_HAS_RESET_CONTROLLER select ARM_AMBA select ARM_GLOBAL_TIMER select ARM_GIC diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index 8b8d0724f6c6..98e29dee91e8 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -26,19 +26,37 @@ bool __init vexpress_smp_init_ops(void) { #ifdef CONFIG_MCPM + int cpu; + struct device_node *cpu_node, *cci_node; + /* - * The best way to detect a multi-cluster configuration at the moment - * is to look for the presence of a CCI in the system. + * The best way to detect a multi-cluster configuration + * is to detect if the kernel can take over CCI ports + * control. Loop over possible CPUs and check if CCI + * port control is available. * Override the default vexpress_smp_ops if so. */ - struct device_node *node; - node = of_find_compatible_node(NULL, NULL, "arm,cci-400"); - if (node && of_device_is_available(node)) { - mcpm_smp_set_ops(); - return true; + for_each_possible_cpu(cpu) { + bool available; + + cpu_node = of_get_cpu_node(cpu, NULL); + if (WARN(!cpu_node, "Missing cpu device node!")) + return false; + + cci_node = of_parse_phandle(cpu_node, "cci-control-port", 0); + available = cci_node && of_device_is_available(cci_node); + of_node_put(cci_node); + of_node_put(cpu_node); + + if (!available) + return false; } -#endif + + mcpm_smp_set_ops(); + return true; +#else return false; +#endif } static const struct of_device_id vexpress_smp_dt_scu_match[] __initconst = { diff --git a/arch/arm/mach-zx/zx296702-pm-domain.c b/arch/arm/mach-zx/zx296702-pm-domain.c index e08574d4e2ca..79dcf2549267 100644 --- a/arch/arm/mach-zx/zx296702-pm-domain.c +++ b/arch/arm/mach-zx/zx296702-pm-domain.c @@ -169,7 +169,7 @@ static int zx296702_pd_probe(struct platform_device *pdev) } pcubase = devm_ioremap_resource(&pdev->dev, res); - if (!pcubase) { + if (IS_ERR(pcubase)) { dev_err(&pdev->dev, "ioremap fail.\n"); return -EIO; } diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index d12002cd63bc..ed118648313f 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -59,7 +59,7 @@ void __iomem *zynq_scu_base; static void __init zynq_memory_init(void) { if (!__pa(PAGE_OFFSET)) - memblock_reserve(__pa(PAGE_OFFSET), __pa(swapper_pg_dir)); + memblock_reserve(__pa(PAGE_OFFSET), 0x80000); } static struct platform_device zynq_cpuidle_device = { diff --git a/arch/arm/mm/abort-lv4t.S b/arch/arm/mm/abort-lv4t.S index 6d8e8e3365d1..4cdfab31a0b6 100644 --- a/arch/arm/mm/abort-lv4t.S +++ b/arch/arm/mm/abort-lv4t.S @@ -7,7 +7,7 @@ * : r4 = aborted context pc * : r5 = aborted context psr * - * Returns : r4-r5, r10-r11, r13 preserved + * Returns : r4-r5, r9-r11, r13 preserved * * Purpose : obtain information about current aborted instruction. * Note: we read user space. This means we might cause a data @@ -48,7 +48,10 @@ ENTRY(v4t_late_abort) /* c */ b do_DataAbort @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m /* d */ b do_DataAbort @ ldc rd, [rn, #m] /* e */ b .data_unknown -/* f */ +/* f */ b .data_unknown + +.data_unknown_r9: + ldr r9, [sp], #4 .data_unknown: @ Part of jumptable mov r0, r4 mov r1, r8 @@ -57,6 +60,7 @@ ENTRY(v4t_late_abort) .data_arm_ldmstm: tst r8, #1 << 21 @ check writeback bit beq do_DataAbort @ no writeback -> no fixup + str r9, [sp, #-4]! mov r7, #0x11 orr r7, r7, #0x1100 and r6, r8, r7 @@ -75,12 +79,14 @@ ENTRY(v4t_late_abort) subne r7, r7, r6, lsl #2 @ Undo increment addeq r7, r7, r6, lsl #2 @ Undo decrement str r7, [r2, r9, lsr #14] @ Put register 'Rn' + ldr r9, [sp], #4 b do_DataAbort .data_arm_lateldrhpre: tst r8, #1 << 21 @ Check writeback bit beq do_DataAbort @ No writeback -> no fixup .data_arm_lateldrhpost: + str r9, [sp, #-4]! and r9, r8, #0x00f @ get Rm / low nibble of immediate value tst r8, #1 << 22 @ if (immediate offset) andne r6, r8, #0xf00 @ { immediate high nibble @@ -93,6 +99,7 @@ ENTRY(v4t_late_abort) subne r7, r7, r6 @ Undo incrmenet addeq r7, r7, r6 @ Undo decrement str r7, [r2, r9, lsr #14] @ Put register 'Rn' + ldr r9, [sp], #4 b do_DataAbort .data_arm_lateldrpreconst: @@ -101,12 +108,14 @@ ENTRY(v4t_late_abort) .data_arm_lateldrpostconst: movs r6, r8, lsl #20 @ Get offset beq do_DataAbort @ zero -> no fixup + str r9, [sp, #-4]! and r9, r8, #15 << 16 @ Extract 'n' from instruction ldr r7, [r2, r9, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r6, lsr #20 @ Undo increment addeq r7, r7, r6, lsr #20 @ Undo decrement str r7, [r2, r9, lsr #14] @ Put register 'Rn' + ldr r9, [sp], #4 b do_DataAbort .data_arm_lateldrprereg: @@ -115,6 +124,7 @@ ENTRY(v4t_late_abort) .data_arm_lateldrpostreg: and r7, r8, #15 @ Extract 'm' from instruction ldr r6, [r2, r7, lsl #2] @ Get register 'Rm' + str r9, [sp, #-4]! mov r9, r8, lsr #7 @ get shift count ands r9, r9, #31 and r7, r8, #0x70 @ get shift type @@ -126,33 +136,33 @@ ENTRY(v4t_late_abort) b .data_arm_apply_r6_and_rn b .data_arm_apply_r6_and_rn @ 1: LSL #0 nop - b .data_unknown @ 2: MUL? + b .data_unknown_r9 @ 2: MUL? nop - b .data_unknown @ 3: MUL? + b .data_unknown_r9 @ 3: MUL? nop mov r6, r6, lsr r9 @ 4: LSR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, lsr #32 @ 5: LSR #32 b .data_arm_apply_r6_and_rn - b .data_unknown @ 6: MUL? + b .data_unknown_r9 @ 6: MUL? nop - b .data_unknown @ 7: MUL? + b .data_unknown_r9 @ 7: MUL? nop mov r6, r6, asr r9 @ 8: ASR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, asr #32 @ 9: ASR #32 b .data_arm_apply_r6_and_rn - b .data_unknown @ A: MUL? + b .data_unknown_r9 @ A: MUL? nop - b .data_unknown @ B: MUL? + b .data_unknown_r9 @ B: MUL? nop mov r6, r6, ror r9 @ C: ROR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, rrx @ D: RRX b .data_arm_apply_r6_and_rn - b .data_unknown @ E: MUL? + b .data_unknown_r9 @ E: MUL? nop - b .data_unknown @ F: MUL? + b .data_unknown_r9 @ F: MUL? .data_thumb_abort: ldrh r8, [r4] @ read instruction @@ -190,6 +200,7 @@ ENTRY(v4t_late_abort) .data_thumb_pushpop: tst r8, #1 << 10 beq .data_unknown + str r9, [sp, #-4]! and r6, r8, #0x55 @ hweight8(r8) + R bit and r9, r8, #0xaa add r6, r6, r9, lsr #1 @@ -204,9 +215,11 @@ ENTRY(v4t_late_abort) addeq r7, r7, r6, lsl #2 @ increment SP if PUSH subne r7, r7, r6, lsl #2 @ decrement SP if POP str r7, [r2, #13 << 2] + ldr r9, [sp], #4 b do_DataAbort .data_thumb_ldmstm: + str r9, [sp, #-4]! and r6, r8, #0x55 @ hweight8(r8) and r9, r8, #0xaa add r6, r6, r9, lsr #1 @@ -219,4 +232,5 @@ ENTRY(v4t_late_abort) and r6, r6, #15 @ number of regs to transfer sub r7, r7, r6, lsl #2 @ always decrement str r7, [r2, r9, lsr #6] + ldr r9, [sp], #4 b do_DataAbort diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index ab4f74536057..ab7710002ba6 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1167,7 +1167,7 @@ static int __init dma_debug_do_init(void) dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); return 0; } -fs_initcall(dma_debug_do_init); +core_initcall(dma_debug_do_init); #ifdef CONFIG_ARM_DMA_USE_IOMMU diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S index f6d333f09bfe..8dea61640cc1 100644 --- a/arch/arm/mm/proc-v7m.S +++ b/arch/arm/mm/proc-v7m.S @@ -96,7 +96,7 @@ ENTRY(cpu_cm7_proc_fin) ret lr ENDPROC(cpu_cm7_proc_fin) - .section ".text.init", #alloc, #execinstr + .section ".init.text", #alloc, #execinstr __v7m_cm7_setup: mov r8, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC| V7M_SCB_CCR_BP) diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index d055db32ffcb..3e27bffb352d 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -63,32 +63,6 @@ config OMAP_RESET_CLOCKS probably do not want this option enabled until your device drivers work properly. -config OMAP_MUX - bool "OMAP multiplexing support" - depends on ARCH_OMAP - default y - help - Pin multiplexing support for OMAP boards. If your bootloader - sets the multiplexing correctly, say N. Otherwise, or if unsure, - say Y. - -config OMAP_MUX_DEBUG - bool "Multiplexing debug output" - depends on OMAP_MUX - help - Makes the multiplexing functions print out a lot of debug info. - This is useful if you want to find out the correct values of the - multiplexing registers. - -config OMAP_MUX_WARNINGS - bool "Warn about pins the bootloader didn't set up" - depends on OMAP_MUX - default y - help - Choose Y here to warn whenever driver initialization logic needs - to change the pin multiplexing setup. When there are no warnings - printed, it's safe to deselect OMAP_MUX for your product. - config OMAP_MPU_TIMER bool "Use mpu timer" depends on ARCH_OMAP1 diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 97a50e8883f9..47e186729d44 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -11,6 +11,3 @@ obj-y := sram.o dma.o counter_32k.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o -i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o -obj-y += $(i2c-omap-m) $(i2c-omap-y) - diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c deleted file mode 100644 index 58213d9714cd..000000000000 --- a/arch/arm/plat-omap/i2c.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * linux/arch/arm/plat-omap/i2c.c - * - * Helper module for board specific I2C bus registration - * - * Copyright (C) 2007 Nokia Corporation. - * - * Contact: Jarkko Nikula <jhnikula@gmail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/i2c-omap.h> -#include <linux/slab.h> -#include <linux/err.h> -#include <linux/clk.h> - -#include <plat/i2c.h> - -#define OMAP_I2C_MAX_CONTROLLERS 4 -static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS]; - -#define OMAP_I2C_CMDLINE_SETUP (BIT(31)) - -/** - * omap_i2c_bus_setup - Process command line options for the I2C bus speed - * @str: String of options - * - * This function allow to override the default I2C bus speed for given I2C - * bus with a command line option. - * - * Format: i2c_bus=bus_id,clkrate (in kHz) - * - * Returns 1 on success, 0 otherwise. - */ -static int __init omap_i2c_bus_setup(char *str) -{ - int ints[3]; - - get_options(str, 3, ints); - if (ints[0] < 2 || ints[1] < 1 || - ints[1] > OMAP_I2C_MAX_CONTROLLERS) - return 0; - i2c_pdata[ints[1] - 1].clkrate = ints[2]; - i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP; - - return 1; -} -__setup("i2c_bus=", omap_i2c_bus_setup); - -/* - * Register busses defined in command line but that are not registered with - * omap_register_i2c_bus from board initialization code. - */ -int __init omap_register_i2c_bus_cmdline(void) -{ - int i, err = 0; - - for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++) - if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) { - i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP; - err = omap_i2c_add_bus(&i2c_pdata[i], i + 1); - if (err) - goto out; - } - -out: - return err; -} - -/** - * omap_register_i2c_bus - register I2C bus with device descriptors - * @bus_id: bus id counting from number 1 - * @clkrate: clock rate of the bus in kHz - * @info: pointer into I2C device descriptor table or NULL - * @len: number of descriptors in the table - * - * Returns 0 on success or an error code. - */ -int __init omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len) -{ - int err; - - BUG_ON(bus_id < 1 || bus_id > OMAP_I2C_MAX_CONTROLLERS); - - if (info) { - err = i2c_register_board_info(bus_id, info, len); - if (err) - return err; - } - - if (!i2c_pdata[bus_id - 1].clkrate) - i2c_pdata[bus_id - 1].clkrate = clkrate; - - i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP; - - return omap_i2c_add_bus(&i2c_pdata[bus_id - 1], bus_id); -} diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index f74069386c13..26a531ebb6e9 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -478,13 +478,13 @@ static void orion_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) (data_in ^ in_pol) & msk ? "hi" : "lo", in_pol & msk ? "lo" : "hi"); if (!((edg_msk | lvl_msk) & msk)) { - seq_printf(s, " disabled\n"); + seq_puts(s, " disabled\n"); continue; } if (edg_msk & msk) - seq_printf(s, " edge "); + seq_puts(s, " edge "); if (lvl_msk & msk) - seq_printf(s, " level"); + seq_puts(s, " level"); seq_printf(s, " (%s)\n", cause & msk ? "pending" : "clear "); } } diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index e93aa6734147..cf7b95fddbb3 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -1124,15 +1124,6 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio; - pd.dma_tx = (void *)DMACH_SPI0_TX; - pd.dma_rx = (void *)DMACH_SPI0_RX; -#if defined(CONFIG_PL330_DMA) - pd.filter = pl330_filter; -#elif defined(CONFIG_S3C64XX_PL080) - pd.filter = pl08x_filter_id; -#elif defined(CONFIG_S3C24XX_DMAC) - pd.filter = s3c24xx_dma_filter; -#endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0); } @@ -1169,14 +1160,6 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio; - pd.dma_tx = (void *)DMACH_SPI1_TX; - pd.dma_rx = (void *)DMACH_SPI1_RX; -#if defined(CONFIG_PL330_DMA) - pd.filter = pl330_filter; -#elif defined(CONFIG_S3C64XX_PL080) - pd.filter = pl08x_filter_id; -#endif - s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1); } @@ -1213,13 +1196,6 @@ void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio; - pd.dma_tx = (void *)DMACH_SPI2_TX; - pd.dma_rx = (void *)DMACH_SPI2_RX; -#if defined(CONFIG_PL330_DMA) - pd.filter = pl330_filter; -#elif defined(CONFIG_S3C64XX_PL080) - pd.filter = pl08x_filter_id; -#endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2); } diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index f193414d0f6f..4986dc0c1dff 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -372,8 +372,7 @@ static int __init xen_guest_init(void) * for secondary CPUs as they are brought up. * For uniformity we use VCPUOP_register_vcpu_info even on cpu0. */ - xen_vcpu_info = __alloc_percpu(sizeof(struct vcpu_info), - sizeof(struct vcpu_info)); + xen_vcpu_info = alloc_percpu(struct vcpu_info); if (xen_vcpu_info == NULL) return -ENOMEM; diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index d062f08f5020..bd62d94f8ac5 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -186,7 +186,6 @@ struct dma_map_ops *xen_dma_ops; EXPORT_SYMBOL(xen_dma_ops); static struct dma_map_ops xen_swiotlb_dma_ops = { - .mapping_error = xen_swiotlb_dma_mapping_error, .alloc = xen_swiotlb_alloc_coherent, .free = xen_swiotlb_free_coherent, .sync_single_for_cpu = xen_swiotlb_sync_single_for_cpu, |