diff options
Diffstat (limited to 'arch/arm')
52 files changed, 302 insertions, 227 deletions
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts index 72d26d130efa..85f54fa595aa 100644 --- a/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts +++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts @@ -77,7 +77,7 @@ }; &hdmi { - hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; + hpd-gpios = <&expgpio 0 GPIO_ACTIVE_LOW>; power-domains = <&power RPI_POWER_DOMAIN_HDMI>; status = "okay"; }; diff --git a/arch/arm/boot/dts/renesas/emev2-kzm9d.dts b/arch/arm/boot/dts/renesas/emev2-kzm9d.dts index 89495dd37358..9b64f98310f3 100644 --- a/arch/arm/boot/dts/renesas/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/renesas/emev2-kzm9d.dts @@ -31,28 +31,28 @@ gpio_keys { compatible = "gpio-keys"; - one { + key-1 { debounce-interval = <50>; wakeup-source; label = "DSW2-1"; linux,code = <KEY_1>; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; - two { + key-2 { debounce-interval = <50>; wakeup-source; label = "DSW2-2"; linux,code = <KEY_2>; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; - three { + key-3 { debounce-interval = <50>; wakeup-source; label = "DSW2-3"; linux,code = <KEY_3>; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; }; - four { + key-4 { debounce-interval = <50>; wakeup-source; label = "DSW2-4"; @@ -83,8 +83,7 @@ compatible = "smsc,lan9221", "smsc,lan9115"; reg = <0x20000000 0x10000>; phy-mode = "mii"; - interrupt-parent = <&gpio0>; - interrupts = <1 IRQ_TYPE_EDGE_RISING>; + interrupts-extended = <&gpio0 1 IRQ_TYPE_EDGE_RISING>; reg-io-width = <4>; smsc,irq-active-high; smsc,irq-push-pull; diff --git a/arch/arm/boot/dts/renesas/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/renesas/iwg20d-q7-common.dtsi index 4351c5a02fa5..2cc2908b48ca 100644 --- a/arch/arm/boot/dts/renesas/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/renesas/iwg20d-q7-common.dtsi @@ -219,8 +219,7 @@ touch: touchpanel@38 { compatible = "edt,edt-ft5406"; reg = <0x38>; - interrupt-parent = <&gpio2>; - interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio2 12 IRQ_TYPE_EDGE_FALLING>; vcc-supply = <&vcc_3v3_tft1>; }; }; diff --git a/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi index de52218ceaa4..ca58ea93f58f 100644 --- a/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi +++ b/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi @@ -73,8 +73,7 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&gpio0>; - interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio0 13 IRQ_TYPE_LEVEL_LOW>; clocks = <&cec_clock>; clock-names = "cec"; diff --git a/arch/arm/boot/dts/renesas/r7s72100-genmai.dts b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts index 29ba098f5dd5..c81840dfb7da 100644 --- a/arch/arm/boot/dts/renesas/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "r7s72100.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/r7s72100-pinctrl.h> / { @@ -24,11 +25,6 @@ stdout-path = "serial0:115200n8"; }; - memory@8000000 { - device_type = "memory"; - reg = <0x08000000 0x08000000>; - }; - flash@18000000 { compatible = "mtd-rom"; reg = <0x18000000 0x08000000>; @@ -53,13 +49,29 @@ partition@4000000 { label = "user1"; - reg = <0x04000000 0x40000000>; + reg = <0x04000000 0x04000000>; }; }; }; + keyboard { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&keyboard_pins>; + + key-1 { + /* JP3 must be set to 1-2 (default) */ + interrupts-extended = <&irqc 6 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_1>; + label = "SW6,SW7"; + wakeup-source; + }; + }; + leds { - status = "okay"; + /* Needs SDHI0 to be disabled */ + status = "disabled"; compatible = "gpio-leds"; led1 { @@ -70,47 +82,22 @@ gpios = <&port4 11 GPIO_ACTIVE_LOW>; }; }; -}; - -&pinctrl { - - scif2_pins: serial2 { - /* P3_0 as TxD2; P3_2 as RxD2 */ - pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>; - }; - i2c2_pins: i2c2 { - /* RIIC2: P1_4 as SCL, P1_5 as SDA */ - pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>; + memory@8000000 { + device_type = "memory"; + reg = <0x08000000 0x08000000>; }; - ether_pins: ether { - /* Ethernet on Ports 1,2,3,5 */ - pinmux = <RZA1_PINMUX(1, 14, 4)>,/* P1_14 = ET_COL */ - <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC */ - <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */ - <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */ - <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER */ - <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV */ - <RZA1_PINMUX(2, 0, 2)>, /* P2_0 = ET_TXCLK */ - <RZA1_PINMUX(2, 1, 2)>, /* P2_1 = ET_TXER */ - <RZA1_PINMUX(2, 2, 2)>, /* P2_2 = ET_TXEN */ - <RZA1_PINMUX(2, 3, 2)>, /* P2_3 = ET_CRS */ - <RZA1_PINMUX(2, 4, 2)>, /* P2_4 = ET_TXD0 */ - <RZA1_PINMUX(2, 5, 2)>, /* P2_5 = ET_TXD1 */ - <RZA1_PINMUX(2, 6, 2)>, /* P2_6 = ET_TXD2 */ - <RZA1_PINMUX(2, 7, 2)>, /* P2_7 = ET_TXD3 */ - <RZA1_PINMUX(2, 8, 2)>, /* P2_8 = ET_RXD0 */ - <RZA1_PINMUX(2, 9, 2)>, /* P2_9 = ET_RXD1 */ - <RZA1_PINMUX(2, 10, 2)>,/* P2_10 = ET_RXD2 */ - <RZA1_PINMUX(2, 11, 2)>;/* P2_11 = ET_RXD3 */ + cvcc2: regulator-mmc { + compatible = "regulator-fixed"; + regulator-name = "Cvcc2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; }; }; -&extal_clk { - clock-frequency = <13330000>; -}; - &bsc { flash@0 { compatible = "cfi-flash"; @@ -167,18 +154,6 @@ }; }; -&usb_x1_clk { - clock-frequency = <48000000>; -}; - -&rtc_x1_clk { - clock-frequency = <32768>; -}; - -&mtu2 { - status = "okay"; -}; - ðer { pinctrl-names = "default"; pinctrl-0 = <ðer_pins>; @@ -194,6 +169,10 @@ }; }; +&extal_clk { + clock-frequency = <13330000>; +}; + &i2c2 { status = "okay"; clock-frequency = <400000>; @@ -208,6 +187,98 @@ }; }; +&mmcif { + pinctrl-0 = <&mmcif_pins>; + pinctrl-names = "default"; + cd-gpios = <&port3 8 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&cvcc2>; + vqmmc-supply = <&cvcc2>; + bus-width = <8>; + status = "okay"; +}; + +&mtu2 { + status = "okay"; +}; + +&ostm0 { + status = "okay"; +}; + +&ostm1 { + status = "okay"; +}; + +&pinctrl { + ether_pins: ether { + /* Ethernet on Ports 1,2,3,5 */ + pinmux = <RZA1_PINMUX(1, 14, 4)>,/* P1_14 = ET_COL */ + <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC */ + <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */ + <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */ + <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER */ + <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV */ + <RZA1_PINMUX(2, 0, 2)>, /* P2_0 = ET_TXCLK */ + <RZA1_PINMUX(2, 1, 2)>, /* P2_1 = ET_TXER */ + <RZA1_PINMUX(2, 2, 2)>, /* P2_2 = ET_TXEN */ + <RZA1_PINMUX(2, 3, 2)>, /* P2_3 = ET_CRS */ + <RZA1_PINMUX(2, 4, 2)>, /* P2_4 = ET_TXD0 */ + <RZA1_PINMUX(2, 5, 2)>, /* P2_5 = ET_TXD1 */ + <RZA1_PINMUX(2, 6, 2)>, /* P2_6 = ET_TXD2 */ + <RZA1_PINMUX(2, 7, 2)>, /* P2_7 = ET_TXD3 */ + <RZA1_PINMUX(2, 8, 2)>, /* P2_8 = ET_RXD0 */ + <RZA1_PINMUX(2, 9, 2)>, /* P2_9 = ET_RXD1 */ + <RZA1_PINMUX(2, 10, 2)>,/* P2_10 = ET_RXD2 */ + <RZA1_PINMUX(2, 11, 2)>;/* P2_11 = ET_RXD3 */ + }; + + i2c2_pins: i2c2 { + /* RIIC2: P1_4 as SCL, P1_5 as SDA */ + pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>; + }; + + keyboard_pins: keyboard { + /* P3_1 as IRQ6 */ + pinmux = <RZA1_PINMUX(3, 1, 3)>; + }; + + mmcif_pins: mmcif { + /* MMCIF: P3_8 is CD_GPIO, P3_10 up to P3_15, P4_0 up to P4_3 */ + pinmux = <RZA1_PINMUX(3, 10, 8)>, /* MMC_D1 */ + <RZA1_PINMUX(3, 11, 8)>, /* MMC_D0 */ + <RZA1_PINMUX(3, 12, 8)>, /* MMC_CLK */ + <RZA1_PINMUX(3, 13, 8)>, /* MMC_CMD */ + <RZA1_PINMUX(3, 14, 8)>, /* MMC_D3 */ + <RZA1_PINMUX(3, 15, 8)>, /* MMC_D2 */ + <RZA1_PINMUX(4, 0, 8)>, /* MMC_D4 */ + <RZA1_PINMUX(4, 1, 8)>, /* MMC_D5 */ + <RZA1_PINMUX(4, 2, 8)>, /* MMC_D6 */ + <RZA1_PINMUX(4, 3, 8)>; /* MMC_D7 */ + }; + + scif2_pins: serial2 { + /* P3_0 as TxD2; P3_2 as RxD2 */ + pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>; + }; + + sdhi0_pins: sdhi0 { + /* SDHI0: P4_8 up to P4_15 */ + pinmux = <RZA1_PINMUX(4, 8, 3)>, /* SD_CD_0 */ + <RZA1_PINMUX(4, 9, 3)>, /* SD_WP_0 */ + <RZA1_PINMUX(4, 10, 3)>, /* SD_D1_0 */ + <RZA1_PINMUX(4, 11, 3)>, /* SD_D0_0 */ + <RZA1_PINMUX(4, 12, 3)>, /* SD_CLK_0 */ + <RZA1_PINMUX(4, 13, 3)>, /* SD_CMD_0 */ + <RZA1_PINMUX(4, 14, 3)>, /* SD_D3_0 */ + <RZA1_PINMUX(4, 15, 3)>; /* SD_D2_0 */ + }; +}; + +&rtc_x1_clk { + clock-frequency = <32768>; +}; + &rtc { status = "okay"; }; @@ -219,12 +290,30 @@ status = "okay"; }; +&sdhi0 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhi0_pins>; + + bus-width = <4>; + status = "okay"; +}; + &spi4 { status = "okay"; codec: codec@0 { compatible = "wlf,wm8978"; reg = <0>; - spi-max-frequency = <5000000>; + spi-max-frequency = <500000>; + #sound-dai-cells = <0>; }; }; + +&usb_x1_clk { + clock-frequency = <48000000>; +}; + +&wdt { + timeout-sec = <60>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts b/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts index b547216d4801..25c6d0c78828 100644 --- a/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts +++ b/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts @@ -78,24 +78,21 @@ pinctrl-0 = <&keyboard_pins>; key-1 { - interrupt-parent = <&irqc>; - interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&irqc 3 IRQ_TYPE_EDGE_BOTH>; linux,code = <KEY_1>; label = "SW1"; wakeup-source; }; key-2 { - interrupt-parent = <&irqc>; - interrupts = <2 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&irqc 2 IRQ_TYPE_EDGE_BOTH>; linux,code = <KEY_2>; label = "SW2"; wakeup-source; }; key-3 { - interrupt-parent = <&irqc>; - interrupts = <5 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&irqc 5 IRQ_TYPE_EDGE_BOTH>; linux,code = <KEY_3>; label = "SW3"; wakeup-source; @@ -283,3 +280,8 @@ pinctrl-0 = <&scif2_pins>; status = "okay"; }; + +&wdt { + timeout-sec = <60>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/renesas/r7s72100.dtsi b/arch/arm/boot/dts/renesas/r7s72100.dtsi index 08ea4c551ed0..39999468c28b 100644 --- a/arch/arm/boot/dts/renesas/r7s72100.dtsi +++ b/arch/arm/boot/dts/renesas/r7s72100.dtsi @@ -36,7 +36,7 @@ clock-div = <3>; }; - bsc: bsc { + bsc: bus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -333,8 +333,6 @@ <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R7S72100_CLK_MMCIF>; power-domains = <&cpg_clocks>; - reg-io-width = <4>; - bus-width = <8>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/renesas/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/renesas/r7s9210-rza2mevb.dts index cd2324b8e8ff..f69a7fe56b6e 100644 --- a/arch/arm/boot/dts/renesas/r7s9210-rza2mevb.dts +++ b/arch/arm/boot/dts/renesas/r7s9210-rza2mevb.dts @@ -55,8 +55,7 @@ pinctrl-0 = <&keyboard_pins>; key-3 { - interrupt-parent = <&irqc>; - interrupts = <0 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&irqc 0 IRQ_TYPE_EDGE_BOTH>; linux,code = <KEY_3>; label = "SW3"; wakeup-source; diff --git a/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts index 3d02f065f71c..58becc9fbffd 100644 --- a/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts @@ -193,8 +193,7 @@ ethernet@8000000 { compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0x08000000 0x1000>; - interrupt-parent = <&irqc1>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&irqc1 8 IRQ_TYPE_LEVEL_HIGH>; phy-mode = "mii"; reg-io-width = <4>; smsc,irq-active-high; diff --git a/arch/arm/boot/dts/renesas/r8a73a4.dtsi b/arch/arm/boot/dts/renesas/r8a73a4.dtsi index 85261684b5d5..2e19ebf9e2ba 100644 --- a/arch/arm/boot/dts/renesas/r8a73a4.dtsi +++ b/arch/arm/boot/dts/renesas/r8a73a4.dtsi @@ -428,7 +428,6 @@ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_MMCIF0>; power-domains = <&pd_a3sp>; - reg-io-width = <4>; status = "disabled"; }; @@ -438,7 +437,6 @@ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_MMCIF1>; power-domains = <&pd_a3sp>; - reg-io-width = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts index e1ac2c161e73..04d24b6d8056 100644 --- a/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts @@ -224,8 +224,7 @@ touchscreen@55 { compatible = "sitronix,st1232"; reg = <0x55>; - interrupt-parent = <&irqpin1>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqpin1 2 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&st1232_pins>; pinctrl-names = "default"; gpios = <&pfc 166 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7.dts index 64102b664055..6a8a0d2113b0 100644 --- a/arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7.dts +++ b/arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7.dts @@ -202,8 +202,7 @@ touch: touchpanel@38 { compatible = "edt,edt-ft5406"; reg = <0x38>; - interrupt-parent = <&gpio0>; - interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio0 24 IRQ_TYPE_EDGE_FALLING>; /* GP1_29 is also shared with audio codec reset pin */ reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; vcc-supply = <&vcc_3v3_tft1>; diff --git a/arch/arm/boot/dts/renesas/r8a7742-iwg21m.dtsi b/arch/arm/boot/dts/renesas/r8a7742-iwg21m.dtsi index b281a4d164b0..661cc5357b57 100644 --- a/arch/arm/boot/dts/renesas/r8a7742-iwg21m.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7742-iwg21m.dtsi @@ -55,8 +55,7 @@ rtc@68 { compatible = "ti,bq32000"; reg = <0x68>; - interrupt-parent = <&gpio1>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio1 1 IRQ_TYPE_EDGE_FALLING>; }; }; diff --git a/arch/arm/boot/dts/renesas/r8a7742.dtsi b/arch/arm/boot/dts/renesas/r8a7742.dtsi index 3a5d6b434d09..9083d288cc33 100644 --- a/arch/arm/boot/dts/renesas/r8a7742.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7742.dtsi @@ -1651,7 +1651,6 @@ dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; resets = <&cpg 315>; - reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; }; @@ -1667,7 +1666,6 @@ dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; resets = <&cpg 305>; - reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; }; diff --git a/arch/arm/boot/dts/renesas/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/renesas/r8a7743-sk-rzg1m.dts index ff274bfcb664..9b16fe7ce713 100644 --- a/arch/arm/boot/dts/renesas/r8a7743-sk-rzg1m.dts +++ b/arch/arm/boot/dts/renesas/r8a7743-sk-rzg1m.dts @@ -73,8 +73,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc 0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/renesas/r8a7743.dtsi b/arch/arm/boot/dts/renesas/r8a7743.dtsi index 8833898d5557..58a06cf37784 100644 --- a/arch/arm/boot/dts/renesas/r8a7743.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7743.dtsi @@ -1639,7 +1639,6 @@ dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; resets = <&cpg 315>; - reg-io-width = <4>; max-frequency = <97500000>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/renesas/r8a7744.dtsi b/arch/arm/boot/dts/renesas/r8a7744.dtsi index c66c1102fb72..034244648d18 100644 --- a/arch/arm/boot/dts/renesas/r8a7744.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7744.dtsi @@ -1639,7 +1639,6 @@ dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; resets = <&cpg 315>; - reg-io-width = <4>; max-frequency = <97500000>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts index a0b574398055..5903c1f1356f 100644 --- a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts +++ b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts @@ -84,8 +84,7 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio1 0 IRQ_TYPE_LEVEL_LOW>; clocks = <&cec_clock>; clock-names = "cec"; pd-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts index 24411044ef6c..3ac2526a24a1 100644 --- a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts @@ -185,8 +185,7 @@ port-expander@44 { compatible = "st,stmpe811"; reg = <0x44>; - interrupt-parent = <&gpio4>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_LOW>; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; diff --git a/arch/arm/boot/dts/renesas/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/renesas/r8a7745-sk-rzg1e.dts index 0a75e8c79acc..571615a50620 100644 --- a/arch/arm/boot/dts/renesas/r8a7745-sk-rzg1e.dts +++ b/arch/arm/boot/dts/renesas/r8a7745-sk-rzg1e.dts @@ -68,8 +68,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc>; - interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc 8 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/renesas/r8a7745.dtsi b/arch/arm/boot/dts/renesas/r8a7745.dtsi index 6ddde364782b..704fa6f3cbd0 100644 --- a/arch/arm/boot/dts/renesas/r8a7745.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7745.dtsi @@ -1513,7 +1513,6 @@ dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; resets = <&cpg 315>; - reg-io-width = <4>; max-frequency = <97500000>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/renesas/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/renesas/r8a77470-iwg23s-sbc.dts index 644802285249..e511eb425bc5 100644 --- a/arch/arm/boot/dts/renesas/r8a77470-iwg23s-sbc.dts +++ b/arch/arm/boot/dts/renesas/r8a77470-iwg23s-sbc.dts @@ -82,8 +82,7 @@ compatible = "ethernet-phy-id0022.1622", "ethernet-phy-ieee802.3-c22"; reg = <3>; - interrupt-parent = <&gpio5>; - interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio5 16 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; }; }; @@ -151,8 +150,7 @@ hdmi@39 { compatible = "sil,sii9022"; reg = <0x39>; - interrupt-parent = <&gpio2>; - interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio2 29 IRQ_TYPE_LEVEL_LOW>; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/renesas/r8a7778-bockw.dts b/arch/arm/boot/dts/renesas/r8a7778-bockw.dts index a3f9d74e8877..a99d226f41a6 100644 --- a/arch/arm/boot/dts/renesas/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/renesas/r8a7778-bockw.dts @@ -61,7 +61,7 @@ }; }; -&bsc { +&lbsc { flash@0 { compatible = "cfi-flash"; reg = <0x0 0x04000000>; @@ -96,8 +96,7 @@ reg = <0x18300000 0x1000>; phy-mode = "mii"; - interrupt-parent = <&irqpin>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&irqpin 0 IRQ_TYPE_EDGE_FALLING>; reg-io-width = <4>; vddvario-supply = <&fixedregulator3v3>; vdd33a-supply = <&fixedregulator3v3>; diff --git a/arch/arm/boot/dts/renesas/r8a7778.dtsi b/arch/arm/boot/dts/renesas/r8a7778.dtsi index b80e832c9277..859dd29dfce3 100644 --- a/arch/arm/boot/dts/renesas/r8a7778.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7778.dtsi @@ -40,7 +40,7 @@ spi2 = &hspi2; }; - bsc: bus@1c000000 { + lbsc: bus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/renesas/r8a7779-marzen.dts b/arch/arm/boot/dts/renesas/r8a7779-marzen.dts index 9b13e8d1538b..2920d87ea6ff 100644 --- a/arch/arm/boot/dts/renesas/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/renesas/r8a7779-marzen.dts @@ -58,17 +58,15 @@ pinctrl-0 = <&keypad0_pins>; pinctrl-names = "default"; - interrupt-parent = <&gpio0>; - key-1 { - interrupts = <17 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio0 17 IRQ_TYPE_EDGE_FALLING>; linux,code = <KEY_1>; label = "SW1-1"; wakeup-source; debounce-interval = <20>; }; key-2 { - interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio0 18 IRQ_TYPE_EDGE_FALLING>; linux,code = <KEY_2>; label = "SW1-2"; wakeup-source; @@ -251,8 +249,7 @@ pinctrl-names = "default"; phy-mode = "mii"; - interrupt-parent = <&irqpin0>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&irqpin0 1 IRQ_TYPE_EDGE_FALLING>; smsc,irq-push-pull; reg-io-width = <4>; vddvario-supply = <&fixedregulator3v3>; diff --git a/arch/arm/boot/dts/renesas/r8a7779.dtsi b/arch/arm/boot/dts/renesas/r8a7779.dtsi index 1944703cba4f..e437c22f452d 100644 --- a/arch/arm/boot/dts/renesas/r8a7779.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7779.dtsi @@ -704,7 +704,7 @@ }; }; - lbsc: lbsc { + lbsc: bus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/renesas/r8a7790-lager.dts b/arch/arm/boot/dts/renesas/r8a7790-lager.dts index 8590981245a6..3bce5876a9d8 100644 --- a/arch/arm/boot/dts/renesas/r8a7790-lager.dts +++ b/arch/arm/boot/dts/renesas/r8a7790-lager.dts @@ -79,28 +79,28 @@ pinctrl-0 = <&keyboard_pins>; pinctrl-names = "default"; - one { + key-1 { linux,code = <KEY_1>; label = "SW2-1"; wakeup-source; debounce-interval = <20>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; - two { + key-2 { linux,code = <KEY_2>; label = "SW2-2"; wakeup-source; debounce-interval = <20>; gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; - three { + key-3 { linux,code = <KEY_3>; label = "SW2-3"; wakeup-source; debounce-interval = <20>; gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; }; - four { + key-4 { linux,code = <KEY_4>; label = "SW2-4"; wakeup-source; @@ -365,8 +365,7 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&gpio1>; - interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>; clocks = <&cec_clock>; clock-names = "cec"; @@ -403,8 +402,7 @@ hdmi-in@4c { compatible = "adi,adv7612"; reg = <0x4c>; - interrupt-parent = <&gpio1>; - interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio1 20 IRQ_TYPE_LEVEL_LOW>; default-input = <0>; ports { @@ -444,8 +442,7 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; @@ -461,8 +458,7 @@ vdd_dvfs: regulator@68 { compatible = "dlg,da9210"; reg = <0x68>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -692,8 +688,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>; }; @@ -890,7 +885,7 @@ status = "okay"; pinctrl-0 = <&hsusb_pins>; pinctrl-names = "default"; - renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>; + renesas,enable-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; }; &usbphy { diff --git a/arch/arm/boot/dts/renesas/r8a7790-stout.dts b/arch/arm/boot/dts/renesas/r8a7790-stout.dts index 683f7395fab0..d7c0a9574ce8 100644 --- a/arch/arm/boot/dts/renesas/r8a7790-stout.dts +++ b/arch/arm/boot/dts/renesas/r8a7790-stout.dts @@ -211,8 +211,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 1 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; }; @@ -300,8 +299,7 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&gpio1>; - interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>; clocks = <&osc4_clk>; clock-names = "cec"; @@ -344,8 +342,7 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; @@ -365,8 +362,7 @@ vdd_dvfs: regulator@68 { compatible = "dlg,da9210"; reg = <0x68>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -377,8 +373,7 @@ vdd: regulator@70 { compatible = "dlg,da9210"; reg = <0x70>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/renesas/r8a7790.dtsi b/arch/arm/boot/dts/renesas/r8a7790.dtsi index 20e4d4c6e748..f746f0b9e686 100644 --- a/arch/arm/boot/dts/renesas/r8a7790.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7790.dtsi @@ -1686,7 +1686,6 @@ dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; resets = <&cpg 315>; - reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; }; @@ -1702,7 +1701,6 @@ dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; resets = <&cpg 305>; - reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; }; diff --git a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts index 0efd9f98c75a..e4e1d9c98c61 100644 --- a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts @@ -397,8 +397,7 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&gpio3>; - interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio3 29 IRQ_TYPE_LEVEL_LOW>; clocks = <&cec_clock>; clock-names = "cec"; @@ -435,8 +434,7 @@ hdmi-in@4c { compatible = "adi,adv7612"; reg = <0x4c>; - interrupt-parent = <&gpio4>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio4 2 IRQ_TYPE_LEVEL_LOW>; default-input = <0>; ports { @@ -659,8 +657,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; @@ -816,8 +813,7 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; @@ -833,8 +829,7 @@ vdd_dvfs: regulator@68 { compatible = "dlg,da9210"; reg = <0x68>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -859,7 +854,7 @@ status = "okay"; pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; - renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>; + renesas,enable-gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; }; &usbphy { diff --git a/arch/arm/boot/dts/renesas/r8a7791-porter.dts b/arch/arm/boot/dts/renesas/r8a7791-porter.dts index 93c86e921645..08381498350a 100644 --- a/arch/arm/boot/dts/renesas/r8a7791-porter.dts +++ b/arch/arm/boot/dts/renesas/r8a7791-porter.dts @@ -194,8 +194,7 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&gpio3>; - interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio3 29 IRQ_TYPE_LEVEL_LOW>; avdd-supply = <®_1p8v>; dvdd-supply = <®_1p8v>; @@ -329,8 +328,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; @@ -410,8 +408,7 @@ pmic@5a { compatible = "dlg,da9063l"; reg = <0x5a>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; @@ -423,8 +420,7 @@ vdd_dvfs: regulator@68 { compatible = "dlg,da9210"; reg = <0x68>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/renesas/r8a7791.dtsi b/arch/arm/boot/dts/renesas/r8a7791.dtsi index f9c9e1d8f669..e57567adff55 100644 --- a/arch/arm/boot/dts/renesas/r8a7791.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7791.dtsi @@ -1680,7 +1680,6 @@ dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; resets = <&cpg 315>; - reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; }; diff --git a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts index 540a9ad28f28..a3986076d8e3 100644 --- a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts @@ -224,8 +224,7 @@ compatible = "smsc,lan89218", "smsc,lan9115"; reg = <0x18000000 0x100>; phy-mode = "mii"; - interrupt-parent = <&irqc>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&irqc 0 IRQ_TYPE_EDGE_FALLING>; smsc,irq-push-pull; reg-io-width = <4>; vddvario-supply = <&d3_3v>; @@ -336,8 +335,7 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&irqc>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&irqc 3 IRQ_TYPE_EDGE_FALLING>; avdd-supply = <&d1_8v>; dvdd-supply = <&d1_8v>; @@ -378,8 +376,7 @@ reg = <0x58>; pinctrl-names = "default"; pinctrl-0 = <&pmic_irq_pins>; - interrupt-parent = <&irqc>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc 2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/renesas/r8a7792-wheat.dts b/arch/arm/boot/dts/renesas/r8a7792-wheat.dts index 000f21a2a863..bfc780f7e396 100644 --- a/arch/arm/boot/dts/renesas/r8a7792-wheat.dts +++ b/arch/arm/boot/dts/renesas/r8a7792-wheat.dts @@ -115,8 +115,7 @@ compatible = "smsc,lan89218", "smsc,lan9115"; reg = <0x18000000 0x100>; phy-mode = "mii"; - interrupt-parent = <&irqc>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&irqc 0 IRQ_TYPE_EDGE_FALLING>; smsc,irq-push-pull; smsc,save-mac-address; reg-io-width = <4>; diff --git a/arch/arm/boot/dts/renesas/r8a7792.dtsi b/arch/arm/boot/dts/renesas/r8a7792.dtsi index dd3bc32668b7..08cbe6c13cee 100644 --- a/arch/arm/boot/dts/renesas/r8a7792.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7792.dtsi @@ -84,7 +84,7 @@ clock-frequency = <0>; }; - lbsc: lbsc { + lbsc: bus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/renesas/r8a7793-gose.dts b/arch/arm/boot/dts/renesas/r8a7793-gose.dts index 1ea6c757893b..2c05d7c2b377 100644 --- a/arch/arm/boot/dts/renesas/r8a7793-gose.dts +++ b/arch/arm/boot/dts/renesas/r8a7793-gose.dts @@ -383,8 +383,7 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&gpio3>; - interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio3 29 IRQ_TYPE_LEVEL_LOW>; avdd-supply = <®_1p8v>; dvdd-supply = <®_1p8v>; @@ -419,8 +418,7 @@ hdmi-in@4c { compatible = "adi,adv7612"; reg = <0x4c>; - interrupt-parent = <&gpio4>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio4 2 IRQ_TYPE_LEVEL_LOW>; default-input = <0>; ports { @@ -622,8 +620,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; @@ -756,8 +753,7 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; @@ -773,8 +769,7 @@ vdd_dvfs: regulator@68 { compatible = "dlg,da9210"; reg = <0x68>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/renesas/r8a7793.dtsi b/arch/arm/boot/dts/renesas/r8a7793.dtsi index 24e66ddf37e0..e48e43cc6b03 100644 --- a/arch/arm/boot/dts/renesas/r8a7793.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7793.dtsi @@ -1343,7 +1343,6 @@ dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; resets = <&cpg 315>; - reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; }; diff --git a/arch/arm/boot/dts/renesas/r8a7794-alt.dts b/arch/arm/boot/dts/renesas/r8a7794-alt.dts index b5ecafbb2e4d..f70e26aa83a0 100644 --- a/arch/arm/boot/dts/renesas/r8a7794-alt.dts +++ b/arch/arm/boot/dts/renesas/r8a7794-alt.dts @@ -96,28 +96,28 @@ pinctrl-0 = <&keyboard_pins>; pinctrl-names = "default"; - one { + key-1 { linux,code = <KEY_1>; label = "SW2-1"; wakeup-source; debounce-interval = <20>; gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; }; - two { + key-2 { linux,code = <KEY_2>; label = "SW2-2"; wakeup-source; debounce-interval = <20>; gpios = <&gpio3 10 GPIO_ACTIVE_LOW>; }; - three { + key-3 { linux,code = <KEY_3>; label = "SW2-3"; wakeup-source; debounce-interval = <20>; gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; }; - four { + key-4 { linux,code = <KEY_4>; label = "SW2-4"; wakeup-source; @@ -381,8 +381,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 8 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; @@ -450,8 +449,7 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - interrupt-parent = <&gpio3>; - interrupts = <31 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio3 31 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/renesas/r8a7794-silk.dts b/arch/arm/boot/dts/renesas/r8a7794-silk.dts index 595e074085eb..2a0819311a3c 100644 --- a/arch/arm/boot/dts/renesas/r8a7794-silk.dts +++ b/arch/arm/boot/dts/renesas/r8a7794-silk.dts @@ -262,8 +262,7 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&gpio5>; - interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio5 23 IRQ_TYPE_LEVEL_LOW>; avdd-supply = <&d1_8v>; dvdd-supply = <&d1_8v>; @@ -415,8 +414,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 8 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; @@ -436,8 +434,7 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - interrupt-parent = <&gpio3>; - interrupts = <31 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio3 31 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/renesas/r8a7794.dtsi b/arch/arm/boot/dts/renesas/r8a7794.dtsi index 8e6386a79aea..bc16c896c0f9 100644 --- a/arch/arm/boot/dts/renesas/r8a7794.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7794.dtsi @@ -1349,7 +1349,6 @@ dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; resets = <&cpg 315>; - reg-io-width = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/renesas/sh73a0-kzm9g.dts b/arch/arm/boot/dts/renesas/sh73a0-kzm9g.dts index 98897f710063..1ce07d0878dc 100644 --- a/arch/arm/boot/dts/renesas/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/renesas/sh73a0-kzm9g.dts @@ -172,8 +172,7 @@ compatible = "smsc,lan9221", "smsc,lan9115"; reg = <0x10000000 0x100>; phy-mode = "mii"; - interrupt-parent = <&irqpin0>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&irqpin0 3 IRQ_TYPE_EDGE_FALLING>; reg-io-width = <4>; smsc,irq-push-pull; smsc,save-mac-address; @@ -196,8 +195,7 @@ compass@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; - interrupt-parent = <&irqpin3>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&irqpin3 4 IRQ_TYPE_EDGE_FALLING>; }; ak4648: codec@12 { @@ -209,9 +207,8 @@ accelerometer@1d { compatible = "adi,adxl345"; reg = <0x1d>; - interrupt-parent = <&irqpin3>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, - <3 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&irqpin3 2 IRQ_TYPE_LEVEL_HIGH>, + <&irqpin3 3 IRQ_TYPE_LEVEL_HIGH>; }; rtc@32 { @@ -297,8 +294,7 @@ touchscreen@55 { compatible = "sitronix,st1232"; reg = <0x55>; - interrupt-parent = <&irqpin1>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&irqpin1 0 IRQ_TYPE_EDGE_FALLING>; }; }; @@ -310,8 +306,7 @@ pcf8575: gpio@20 { compatible = "nxp,pcf8575"; reg = <0x20>; - interrupt-parent = <&irqpin2>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&irqpin2 3 IRQ_TYPE_EDGE_FALLING>; gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/arch/arm/boot/dts/renesas/sh73a0.dtsi b/arch/arm/boot/dts/renesas/sh73a0.dtsi index 30c67acc4e35..c7cc17e3c3c5 100644 --- a/arch/arm/boot/dts/renesas/sh73a0.dtsi +++ b/arch/arm/boot/dts/renesas/sh73a0.dtsi @@ -273,7 +273,6 @@ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>; power-domains = <&pd_a3sp>; - reg-io-width = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/st/ste-dbx5x0-pinctrl.dtsi b/arch/arm/boot/dts/st/ste-dbx5x0-pinctrl.dtsi index 31a86606beda..9a6304b7ab25 100644 --- a/arch/arm/boot/dts/st/ste-dbx5x0-pinctrl.dtsi +++ b/arch/arm/boot/dts/st/ste-dbx5x0-pinctrl.dtsi @@ -454,6 +454,31 @@ }; }; + /* MC2 without feedback clock on A8 */ + mc2_a_2_default: mc2_a_2_default { + default_mux { + function = "mc2"; + groups = "mc2_a_2"; + }; + default_cfg1 { + pins = "GPIO128_A5"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + pins = + "GPIO129_B4", /* CMD */ + "GPIO131_A12", /* DAT0 */ + "GPIO132_C10", /* DAT1 */ + "GPIO133_B10", /* DAT2 */ + "GPIO134_B9", /* DAT3 */ + "GPIO135_A9", /* DAT4 */ + "GPIO136_C7", /* DAT5 */ + "GPIO137_A7", /* DAT6 */ + "GPIO138_C5"; /* DAT7 */ + ste,config = <&in_pu>; + }; + }; + mc2_a_1_sleep: mc2_a_1_sleep { sleep_cfg1 { pins = "GPIO128_A5"; /* CLK */ @@ -478,6 +503,30 @@ ste,config = <&in_wkup_pdis>; }; }; + + mc2_a_2_sleep: mc2_a_2_sleep { + sleep_cfg1 { + pins = "GPIO128_A5"; /* CLK */ + ste,config = <&out_lo_wkup_pdis>; + }; + sleep_cfg2 { + pins = + "GPIO129_B4"; /* CMD */ + ste,config = <&in_wkup_pdis_en>; + }; + sleep_cfg3 { + pins = + "GPIO131_A12", /* DAT0 */ + "GPIO132_C10", /* DAT1 */ + "GPIO133_B10", /* DAT2 */ + "GPIO134_B9", /* DAT3 */ + "GPIO135_A9", /* DAT4 */ + "GPIO136_C7", /* DAT5 */ + "GPIO137_A7", /* DAT6 */ + "GPIO138_C5"; /* DAT7 */ + ste,config = <&in_wkup_pdis>; + }; + }; }; sdi4 { diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts index c623cc35c5ea..404d4ea9347b 100644 --- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts +++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts @@ -544,6 +544,7 @@ touchscreen-size-y = <800>; pinctrl-names = "default"; pinctrl-0 = <&tsp_default>; + linux,keycodes = <KEY_MENU>, <KEY_BACK>; }; }; diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts index 2355ca6e9ad6..40b0d92dfb15 100644 --- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts +++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts @@ -451,13 +451,17 @@ no-sdio; no-sd; vmmc-supply = <&ldo_3v3_reg>; + vqmmc-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default", "sleep"; /* - * GPIO130 will be set to input no pull-up resulting in a resistor - * pulling the reset high and taking the memory out of reset. + * This muxing excludes the feedback clock on GPIO130 + * which is instead used for reset of the eMMC. + * GPIO130 will be set to input no pull-up resulting in + * a resistor pulling the reset high and taking the + * memory out of reset. */ - pinctrl-0 = <&mc2_a_1_default>; - pinctrl-1 = <&mc2_a_1_sleep>; + pinctrl-0 = <&mc2_a_2_default>; + pinctrl-1 = <&mc2_a_2_sleep>; status = "okay"; }; @@ -644,6 +648,7 @@ touchscreen-size-y = <800>; pinctrl-names = "default"; pinctrl-0 = <&tsp_default>; + linux,keycodes = <KEY_MENU>, <KEY_BACK>; }; }; @@ -677,14 +682,14 @@ sdi2 { /* * This will make the resistor mounted in R0.0 pull up - * the reset line and take the eMMC out of reset. On - * R0.4 variants, GPIO130 should be set in GPIO mode and - * pulled down. (Not connected.) + * the reset line and take the eMMC out of reset so set to + * GPIO input mode, no pull-up. On R0.4 variants, GPIO130 + * could be set in GPIO mode and pulled down. (Not connected.) */ - mc2_a_1_default { - default_cfg2 { - pins = "GPIO130_C8"; /* FBCLK */ - ste,config = <&in_nopull>; + mc2_a_2_default { + default_cfg3 { + pins = "GPIO130_C8"; /* RST_N */ + ste,config = <&gpio_in_nopull>; }; }; }; diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c index f5b66f4cf45d..21df5e7f51f9 100644 --- a/arch/arm/crypto/aes-ce-glue.c +++ b/arch/arm/crypto/aes-ce-glue.c @@ -8,7 +8,7 @@ #include <asm/hwcap.h> #include <asm/neon.h> #include <asm/simd.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include <crypto/aes.h> #include <crypto/ctr.h> #include <crypto/internal/simd.h> diff --git a/arch/arm/crypto/crc32-ce-glue.c b/arch/arm/crypto/crc32-ce-glue.c index 4ff18044af07..20b4dff13e3a 100644 --- a/arch/arm/crypto/crc32-ce-glue.c +++ b/arch/arm/crypto/crc32-ce-glue.c @@ -18,7 +18,7 @@ #include <asm/hwcap.h> #include <asm/neon.h> #include <asm/simd.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #define PMULL_MIN_LEN 64L /* minimum size of buffer * for crc32_pmull_le_16 */ diff --git a/arch/arm/crypto/ghash-ce-glue.c b/arch/arm/crypto/ghash-ce-glue.c index 3ddf05b4234d..3af997082534 100644 --- a/arch/arm/crypto/ghash-ce-glue.c +++ b/arch/arm/crypto/ghash-ce-glue.c @@ -9,7 +9,7 @@ #include <asm/hwcap.h> #include <asm/neon.h> #include <asm/simd.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include <crypto/aes.h> #include <crypto/gcm.h> #include <crypto/b128ops.h> diff --git a/arch/arm/crypto/poly1305-glue.c b/arch/arm/crypto/poly1305-glue.c index 8482e302c45a..4464ffbf8fd1 100644 --- a/arch/arm/crypto/poly1305-glue.c +++ b/arch/arm/crypto/poly1305-glue.c @@ -8,7 +8,7 @@ #include <asm/hwcap.h> #include <asm/neon.h> #include <asm/simd.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include <crypto/algapi.h> #include <crypto/internal/hash.h> #include <crypto/internal/poly1305.h> diff --git a/arch/arm/crypto/sha2-ce-glue.c b/arch/arm/crypto/sha2-ce-glue.c index c62ce89dd3e0..aeac45bfbf9f 100644 --- a/arch/arm/crypto/sha2-ce-glue.c +++ b/arch/arm/crypto/sha2-ce-glue.c @@ -16,7 +16,7 @@ #include <asm/hwcap.h> #include <asm/simd.h> #include <asm/neon.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include "sha256_glue.h" diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 6c9c16d767cf..f90be312418e 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -12,7 +12,7 @@ #include <linux/string.h> #include <asm/page.h> #include <asm/domain.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include <asm/unified.h> #include <asm/pgtable.h> #include <asm/proc-fns.h> diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index f8dd0b3cc8e0..3c6ddb1afdc4 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -22,7 +22,7 @@ #include <asm/cp15.h> #include <asm/system_info.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include <asm/opcodes.h> #include "fault.h" |