diff options
Diffstat (limited to 'arch/arm')
122 files changed, 2619 insertions, 3095 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 641b3c9a7028..486526641acb 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -47,6 +47,7 @@ dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ da850-evm.dtb dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ dove-cubox.dtb \ + dove-d2plug.dtb \ dove-dove-db.dtb dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ @@ -83,6 +84,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-lschlv2.dtb \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ + kirkwood-mv88f6281gtw-ge.dtb \ kirkwood-netgear_readynas_duo_v2.dtb \ kirkwood-ns2.dtb \ kirkwood-ns2lite.dtb \ @@ -183,6 +185,7 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ ccu9540.dtb dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ + emev2-kzm9d-reference.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ r8a7740-armadillo800eva-reference.dtb \ diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 5cae2ab69762..022646ef4b38 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -42,6 +42,8 @@ regulator-always-on; regulator-boot-on; gpio = <&gpio0 1 0>; + pinctrl-0 = <&pmx_gpio_1>; + pinctrl-names = "default"; }; }; @@ -53,10 +55,24 @@ clock-frequency = <25000000>; }; }; + + ir_recv: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 19 1>; + pinctrl-0 = <&pmx_gpio_19>; + pinctrl-names = "default"; + }; }; &uart0 { status = "okay"; }; &sata0 { status = "okay"; }; +&mdio { status = "okay"; }; +ð { status = "okay"; }; + +ðphy { + compatible = "marvell,88e1310"; + reg = <1>; +}; &i2c0 { status = "okay"; @@ -103,6 +119,7 @@ status = "okay"; /* sdio0 card detect is connected to wrong pin on CuBox */ cd-gpios = <&gpio0 12 1>; + pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>; }; &spi0 { @@ -115,23 +132,3 @@ reg = <0>; }; }; - -&pinctrl { - pinctrl-0 = <&pmx_gpio_1 &pmx_gpio_12>; - pinctrl-names = "default"; - - pmx_gpio_1: pmx-gpio-1 { - marvell,pins = "mpp1"; - marvell,function = "gpio"; - }; - - pmx_gpio_12: pmx-gpio-12 { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; - - pmx_gpio_18: pmx-gpio-18 { - marvell,pins = "mpp18"; - marvell,function = "gpio"; - }; -}; diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/dove-d2plug.dts new file mode 100644 index 000000000000..e2222ce94f2f --- /dev/null +++ b/arch/arm/boot/dts/dove-d2plug.dts @@ -0,0 +1,69 @@ +/dts-v1/; + +/include/ "dove.dtsi" + +/ { + model = "Globalscale D2Plug"; + compatible = "globalscale,d2plug", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>; + pinctrl-names = "default"; + + wlan-ap { + label = "wlan-ap"; + gpios = <&gpio0 0 1>; + }; + + wlan-act { + label = "wlan-act"; + gpios = <&gpio0 1 1>; + }; + + bluetooth-act { + label = "bt-act"; + gpios = <&gpio0 2 1>; + }; + }; +}; + +&uart0 { status = "okay"; }; +&sata0 { status = "okay"; }; +&i2c0 { status = "okay"; }; +&mdio { status = "okay"; }; +ð { status = "okay"; }; + +/* Samsung M8G2F eMMC */ +&sdio0 { + status = "okay"; + non-removable; + bus-width = <4>; +}; + +/* Marvell SD8787 WLAN/BT */ +&sdio1 { + status = "okay"; + non-removable; + bus-width = <4>; +}; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash Macronix MX25L3205D */ + spi-flash@0 { + compatible = "st,m25l3205d"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 6cab46849cdb..cc279166646f 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -10,6 +10,23 @@ gpio2 = &gpio2; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "marvell,pj4a", "marvell,sheeva-v7"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <0>; + }; + }; + + l2: l2-cache { + compatible = "marvell,tauros2-cache"; + marvell,tauros2-cache-features = <0>; + }; + soc@f1000000 { compatible = "simple-bus"; #address-cells = <1>; @@ -25,16 +42,28 @@ 0xf2100000 0xf2100000 0x0100000 /* PCIe0 I/O 1M */ 0xf8000000 0xf8000000 0x8000000>; /* BootROM 128M */ - l2: l2-cache { - compatible = "marvell,tauros2-cache"; - marvell,tauros2-cache-features = <0>; + timer: timer@20300 { + compatible = "marvell,orion-timer"; + reg = <0x20300 0x20>; + interrupt-parent = <&bridge_intc>; + interrupts = <1>, <2>; + clocks = <&core_clk 0>; }; - intc: interrupt-controller { + intc: main-interrupt-ctrl@20200 { compatible = "marvell,orion-intc"; interrupt-controller; #interrupt-cells = <1>; - reg = <0x20204 0x04>, <0x20214 0x04>; + reg = <0x20200 0x10>, <0x20210 0x10>; + }; + + bridge_intc: bridge-interrupt-ctrl@20110 { + compatible = "marvell,orion-bridge-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20110 0x8>; + interrupts = <0>; + marvell,#interrupts = <5>; }; core_clk: core-clocks@d0214 { @@ -43,14 +72,14 @@ #clock-cells = <1>; }; - gate_clk: clock-gating-control@d0038 { + gate_clk: clock-gating-ctrl@d0038 { compatible = "marvell,dove-gating-clock"; reg = <0xd0038 0x4>; clocks = <&core_clk 0>; #clock-cells = <1>; }; - thermal: thermal@d001c { + thermal: thermal-diode@d001c { compatible = "marvell,dove-thermal"; reg = <0xd001c 0x0c>, <0xd005c 0x08>; }; @@ -70,6 +99,8 @@ reg-shift = <2>; interrupts = <8>; clocks = <&core_clk 0>; + pinctrl-0 = <&pmx_uart1>; + pinctrl-names = "default"; status = "disabled"; }; @@ -91,7 +122,7 @@ status = "disabled"; }; - gpio0: gpio@d0400 { + gpio0: gpio-ctrl@d0400 { compatible = "marvell,orion-gpio"; #gpio-cells = <2>; gpio-controller; @@ -102,7 +133,7 @@ interrupts = <12>, <13>, <14>, <60>; }; - gpio1: gpio@d0420 { + gpio1: gpio-ctrl@d0420 { compatible = "marvell,orion-gpio"; #gpio-cells = <2>; gpio-controller; @@ -113,7 +144,7 @@ interrupts = <61>; }; - gpio2: gpio@e8400 { + gpio2: gpio-ctrl@e8400 { compatible = "marvell,orion-gpio"; #gpio-cells = <2>; gpio-controller; @@ -121,13 +152,188 @@ ngpios = <8>; }; - pinctrl: pinctrl@d0200 { + pinctrl: pin-ctrl@d0200 { compatible = "marvell,dove-pinctrl"; reg = <0xd0200 0x10>; clocks = <&gate_clk 22>; + + pmx_gpio_0: pmx-gpio-0 { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + + pmx_gpio_1: pmx-gpio-1 { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_gpio_2: pmx-gpio-2 { + marvell,pins = "mpp2"; + marvell,function = "gpio"; + }; + + pmx_gpio_3: pmx-gpio-3 { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_gpio_4: pmx-gpio-4 { + marvell,pins = "mpp4"; + marvell,function = "gpio"; + }; + + pmx_gpio_5: pmx-gpio-5 { + marvell,pins = "mpp5"; + marvell,function = "gpio"; + }; + + pmx_gpio_6: pmx-gpio-6 { + marvell,pins = "mpp6"; + marvell,function = "gpio"; + }; + + pmx_gpio_7: pmx-gpio-7 { + marvell,pins = "mpp7"; + marvell,function = "gpio"; + }; + + pmx_gpio_8: pmx-gpio-8 { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + + pmx_gpio_9: pmx-gpio-9 { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + + pmx_gpio_10: pmx-gpio-10 { + marvell,pins = "mpp10"; + marvell,function = "gpio"; + }; + + pmx_gpio_11: pmx-gpio-11 { + marvell,pins = "mpp11"; + marvell,function = "gpio"; + }; + + pmx_gpio_12: pmx-gpio-12 { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + pmx_gpio_13: pmx-gpio-13 { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + pmx_gpio_14: pmx-gpio-14 { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + pmx_gpio_15: pmx-gpio-15 { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + pmx_gpio_16: pmx-gpio-16 { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_gpio_17: pmx-gpio-17 { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + + pmx_gpio_18: pmx-gpio-18 { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; + + pmx_gpio_19: pmx-gpio-19 { + marvell,pins = "mpp19"; + marvell,function = "gpio"; + }; + + pmx_gpio_20: pmx-gpio-20 { + marvell,pins = "mpp20"; + marvell,function = "gpio"; + }; + + pmx_gpio_21: pmx-gpio-21 { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + + pmx_camera: pmx-camera { + marvell,pins = "mpp_camera"; + marvell,function = "camera"; + }; + + pmx_camera_gpio: pmx-camera-gpio { + marvell,pins = "mpp_camera"; + marvell,function = "gpio"; + }; + + pmx_sdio0: pmx-sdio0 { + marvell,pins = "mpp_sdio0"; + marvell,function = "sdio0"; + }; + + pmx_sdio0_gpio: pmx-sdio0-gpio { + marvell,pins = "mpp_sdio0"; + marvell,function = "gpio"; + }; + + pmx_sdio1: pmx-sdio1 { + marvell,pins = "mpp_sdio1"; + marvell,function = "sdio1"; + }; + + pmx_sdio1_gpio: pmx-sdio1-gpio { + marvell,pins = "mpp_sdio1"; + marvell,function = "gpio"; + }; + + pmx_audio1_gpio: pmx-audio1-gpio { + marvell,pins = "mpp_audio1"; + marvell,function = "gpio"; + }; + + pmx_spi0: pmx-spi0 { + marvell,pins = "mpp_spi0"; + marvell,function = "spi0"; + }; + + pmx_spi0_gpio: pmx-spi0-gpio { + marvell,pins = "mpp_spi0"; + marvell,function = "gpio"; + }; + + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp_uart1"; + marvell,function = "uart1"; + }; + + pmx_uart1_gpio: pmx-uart1-gpio { + marvell,pins = "mpp_uart1"; + marvell,function = "gpio"; + }; + + pmx_nand: pmx-nand { + marvell,pins = "mpp_nand"; + marvell,function = "nand"; + }; + + pmx_nand_gpo: pmx-nand-gpo { + marvell,pins = "mpp_nand"; + marvell,function = "gpo"; + }; }; - spi0: spi@10600 { + spi0: spi-ctrl@10600 { compatible = "marvell,orion-spi"; #address-cells = <1>; #size-cells = <0>; @@ -135,10 +341,12 @@ interrupts = <6>; reg = <0x10600 0x28>; clocks = <&core_clk 0>; + pinctrl-0 = <&pmx_spi0>; + pinctrl-names = "default"; status = "disabled"; }; - spi1: spi@14600 { + spi1: spi-ctrl@14600 { compatible = "marvell,orion-spi"; #address-cells = <1>; #size-cells = <0>; @@ -149,7 +357,7 @@ status = "disabled"; }; - i2c0: i2c@11000 { + i2c0: i2c-ctrl@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; #address-cells = <1>; @@ -177,23 +385,27 @@ status = "okay"; }; - sdio0: sdio@92000 { + sdio0: sdio-host@92000 { compatible = "marvell,dove-sdhci"; reg = <0x92000 0x100>; interrupts = <35>, <37>; clocks = <&gate_clk 8>; + pinctrl-0 = <&pmx_sdio0>; + pinctrl-names = "default"; status = "disabled"; }; - sdio1: sdio@90000 { + sdio1: sdio-host@90000 { compatible = "marvell,dove-sdhci"; reg = <0x90000 0x100>; interrupts = <36>, <38>; clocks = <&gate_clk 9>; + pinctrl-0 = <&pmx_sdio1>; + pinctrl-names = "default"; status = "disabled"; }; - sata0: sata@a0000 { + sata0: sata-host@a0000 { compatible = "marvell,orion-sata"; reg = <0xa0000 0x2400>; interrupts = <62>; @@ -202,12 +414,12 @@ status = "disabled"; }; - rtc@d8500 { + rtc: real-time-clock@d8500 { compatible = "marvell,orion-rtc"; reg = <0xd8500 0x20>; }; - crypto: crypto@30000 { + crypto: crypto-engine@30000 { compatible = "marvell,orion-crypto"; reg = <0x30000 0x10000>, <0xc8000000 0x800>; @@ -258,5 +470,40 @@ dmacap,xor; }; }; + + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <30>; + clocks = <&gate_clk 2>; + status = "disabled"; + + ethphy: ethernet-phy { + device-type = "ethernet-phy"; + /* set phy address in board file */ + }; + }; + + eth: ethernet-controller@72000 { + compatible = "marvell,orion-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72000 0x4000>; + clocks = <&gate_clk 2>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethernet-port@0 { + device_type = "network"; + compatible = "marvell,orion-eth-port"; + reg = <0>; + interrupts = <29>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + phy-handle = <ðphy>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/emev2-kzm9d-reference.dts b/arch/arm/boot/dts/emev2-kzm9d-reference.dts new file mode 100644 index 000000000000..bed676b95c27 --- /dev/null +++ b/arch/arm/boot/dts/emev2-kzm9d-reference.dts @@ -0,0 +1,57 @@ +/* + * Device Tree Source for the KZM9D board + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +/dts-v1/; + +/include/ "emev2.dtsi" + +/ { + model = "EMEV2 KZM9D Board"; + compatible = "renesas,kzm9d-reference", "renesas,emev2"; + + memory { + device_type = "memory"; + reg = <0x40000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"; + }; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + lan9220@20000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x20000000 0x10000>; + phy-mode = "mii"; + interrupt-parent = <&gpio0>; + interrupts = <1 1>; /* active high */ + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vddvario-supply = <®_1p8v>; + vdd33a-supply = <®_3p3v>; + }; +}; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index b9b3241f173b..dda13bc02f9f 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -21,6 +21,6 @@ }; chosen { - bootargs = "console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"; + bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"; }; }; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index c8a8c08b48dd..99ad2b2e8e14 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -14,6 +14,14 @@ compatible = "renesas,emev2"; interrupt-parent = <&gic>; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -67,4 +75,55 @@ reg = <0xe1050000 0x38>; interrupts = <0 11 0>; }; + + gpio0: gpio@e0050000 { + compatible = "renesas,em-gio"; + reg = <0xe0050000 0x2c>, <0xe0050040 0x20>; + interrupts = <0 67 0>, <0 68 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpio1: gpio@e0050080 { + compatible = "renesas,em-gio"; + reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>; + interrupts = <0 69 0>, <0 70 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpio2: gpio@e0050100 { + compatible = "renesas,em-gio"; + reg = <0xe0050100 0x2c>, <0xe0050140 0x20>; + interrupts = <0 71 0>, <0 72 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpio3: gpio@e0050180 { + compatible = "renesas,em-gio"; + reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>; + interrupts = <0 73 0>, <0 74 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpio4: gpio@e0050200 { + compatible = "renesas,em-gio"; + reg = <0xe0050200 0x2c>, <0xe0050240 0x20>; + interrupts = <0 75 0>, <0 76 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <31>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts index 00c48d26de68..85eed62cadd5 100644 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -89,3 +89,19 @@ gpios = <&gpio0 17 0>; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi index c87cfb816120..ca8bf362748a 100644 --- a/arch/arm/boot/dts/kirkwood-db.dtsi +++ b/arch/arm/boot/dts/kirkwood-db.dtsi @@ -87,3 +87,19 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@8 { + device_type = "ethernet-phy"; + reg = <8>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index 0afe1d07c803..f600ed7adc4c 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -219,3 +219,19 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@8 { + device_type = "ethernet-phy"; + reg = <8>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 7714742bb8d8..915aca6cebe7 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -90,3 +90,20 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + compatible = "marvell,88e1116"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 36c7ba38d500..300fbf83e273 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -99,3 +99,31 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <1>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index 31caa6405065..e9ba68e336ad 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -170,3 +170,19 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index 1e642f39b154..e696c31f88a2 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -96,3 +96,33 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + compatible = "marvell,88e1121"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + device_type = "ethernet-phy"; + compatible = "marvell,88e1121"; + reg = <1>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index 20c4b081f420..69019b8d12df 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -122,3 +122,19 @@ }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@8 { + device_type = "ethernet-phy"; + reg = <8>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 441204e8abc6..3d99164c263f 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -176,3 +176,19 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@11 { + device_type = "ethernet-phy"; + reg = <11>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 00a7bfe5e83b..b08c733684a6 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -194,3 +194,27 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy1: ethernet-phy@11 { + device_type = "ethernet-phy"; + reg = <11>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + speed = <1000>; + duplex = <1>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts index c3f036b86cca..ff9be4523a34 100644 --- a/arch/arm/boot/dts/kirkwood-is2.dts +++ b/arch/arm/boot/dts/kirkwood-is2.dts @@ -30,3 +30,5 @@ }; }; }; + +ðphy0 { reg = <8>; }; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 5d9f5ea78700..466280b6ab31 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -50,3 +50,19 @@ i2c-gpio,delay-us = <2>; /* ~100 kHz */ }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 31b17f5b9d28..93397b1e4027 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -207,3 +207,31 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; + + ethphy1: ethernet-phy@8 { + device_type = "ethernet-phy"; + reg = <8>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 6179333fd71f..def825f43489 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -191,3 +191,30 @@ }; }; +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <1>; + }; + + ethphy1: ethernet-phy@2 { + device_type = "ethernet-phy"; + reg = <2>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts new file mode 100644 index 000000000000..6317e1d088b3 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -0,0 +1,125 @@ +/* + * Marvell 88F6281 GTW GE Board + * + * Lennert Buytenhek <buytenh@marvell.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions that are common between the 6281 + * and 6282 variants of the Marvell Kirkwood Development Board. + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + model = "Marvell 88F6281 GTW GE Board"; + compatible = "marvell,mv88f6281gtw-ge", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + pinctrl@10000 { + pmx_usb_led: pmx-usb-led { + marvell,pins = "mpp12"; + marvell,function = "gpo"; + }; + + pmx_leds: pmx-leds { + marvell,pins = "mpp20", "mpp21"; + marvell,function = "gpio"; + }; + + pmx_keys: pmx-keys { + marvell,pins = "mpp46", "mpp47"; + marvell,function = "gpio"; + }; + }; + + spi@10600 { + pinctrl-0 = <&pmx_spi>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l12805d"; + reg = <0>; + spi-max-frequency = <50000000>; + mode = <0>; + }; + }; + + serial@12000 { + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; + clock-frequency = <200000000>; + status = "ok"; + }; + + ehci@50000 { + status = "okay"; + }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_leds &pmx_usb_led>; + pinctrl-names = "default"; + + green-status { + label = "gtw:green:Status"; + gpios = <&gpio0 20 0>; + }; + + red-status { + label = "gtw:red:Status"; + gpios = <&gpio0 21 0>; + }; + + green-usb { + label = "gtw:green:USB"; + gpios = <&gpio0 12 0>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_keys>; + pinctrl-names = "default"; + + button@1 { + label = "SWR Button"; + linux,code = <0x198>; /* KEY_RESTART */ + gpios = <&gpio1 15 1>; + }; + button@2 { + label = "WPS Button"; + linux,code = <0x211>; /* KEY_WPS_BUTTON */ + gpios = <&gpio1 14 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index ad6ade7d9191..716b203622bd 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -184,3 +184,19 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 2afac0405816..e7b80179c6d2 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -84,3 +84,19 @@ }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy { + device_type = "ethernet-phy"; + /* overwrite reg property in board file */ + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts index b50e93d7796c..e93276d918b8 100644 --- a/arch/arm/boot/dts/kirkwood-ns2.dts +++ b/arch/arm/boot/dts/kirkwood-ns2.dts @@ -30,3 +30,5 @@ }; }; }; + +ðphy0 { reg = <8>; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts index af8259fe8955..34f5e69b9f15 100644 --- a/arch/arm/boot/dts/kirkwood-ns2lite.dts +++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts @@ -30,3 +30,5 @@ }; }; }; + +ðphy0 { reg = <0>; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts index 85f24d227e17..f834c558b695 100644 --- a/arch/arm/boot/dts/kirkwood-ns2max.dts +++ b/arch/arm/boot/dts/kirkwood-ns2max.dts @@ -49,3 +49,5 @@ }; }; }; + +ðphy0 { reg = <8>; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts index 329e530bffe7..b6b66ead90c3 100644 --- a/arch/arm/boot/dts/kirkwood-ns2mini.dts +++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts @@ -50,3 +50,5 @@ }; }; }; + +ðphy0 { reg = <0>; }; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index 38dc8517d777..7235f0c4bf8f 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -166,3 +166,19 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi index f7143f128504..f55a145ec52e 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi @@ -91,3 +91,19 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index f2052d7bc10f..184b8c5dd1a8 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -203,3 +203,19 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts index 6dd1038e4de4..222435d0ed2f 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -50,4 +50,6 @@ gpios = <&gpio0 16 1>; }; }; -};
\ No newline at end of file +}; + +ðphy0 { reg = <8>; }; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index 6fdc5ffcaae5..510c5553cfa0 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -58,4 +58,6 @@ gpios = <&gpio1 5 1>; }; }; -};
\ No newline at end of file +}; + +ðphy0 { reg = <0>; }; diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index 0c9a94cd666c..102eaeb426aa 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -96,3 +96,19 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy { + device_type = "ethernet-phy"; + /* overwrite reg property in board file */ + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 9809fc1f105c..1d6921d2d170 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -20,13 +20,6 @@ gpio0 = &gpio0; gpio1 = &gpio1; }; - intc: interrupt-controller { - compatible = "marvell,orion-intc", "marvell,intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xf1020204 0x04>, - <0xf1020214 0x04>; - }; ocp@f1000000 { compatible = "simple-bus"; @@ -37,6 +30,30 @@ #address-cells = <1>; #size-cells = <1>; + timer: timer@20300 { + compatible = "marvell,orion-timer"; + reg = <0x20300 0x20>; + interrupt-parent = <&bridge_intc>; + interrupts = <1>, <2>; + clocks = <&core_clk 0>; + }; + + intc: main-interrupt-ctrl@20200 { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20200 0x10>, <0x20210 0x10>; + }; + + bridge_intc: bridge-interrupt-ctrl@20110 { + compatible = "marvell,orion-bridge-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20110 0x8>; + interrupts = <1>; + marvell,#interrupts = <6>; + }; + core_clk: core-clocks@10030 { compatible = "marvell,kirkwood-core-clock"; reg = <0x10030 0x4>; @@ -103,9 +120,11 @@ #clock-cells = <1>; }; - wdt@20300 { + wdt: watchdog-timer@20300 { compatible = "marvell,orion-wdt"; reg = <0x20300 0x28>; + interrupt-parent = <&bridge_intc>; + interrupts = <3>; clocks = <&gate_clk 7>; status = "okay"; }; @@ -192,5 +211,57 @@ clocks = <&gate_clk 17>; status = "okay"; }; + + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <46>; + clocks = <&gate_clk 0>; + status = "disabled"; + + /* add phy nodes in board file */ + }; + + eth0: ethernet-controller@72000 { + compatible = "marvell,kirkwood-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72000 0x4000>; + clocks = <&gate_clk 0>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethernet0-port@0 { + device_type = "network"; + compatible = "marvell,kirkwood-eth-port"; + reg = <0>; + interrupts = <11>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + /* set phy-handle property in board file */ + }; + }; + + eth1: ethernet-controller@76000 { + compatible = "marvell,kirkwood-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76000 0x4000>; + clocks = <&gate_clk 19>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethernet1-port@0 { + device_type = "network"; + compatible = "marvell,kirkwood-eth-port"; + reg = <0>; + interrupts = <15>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + /* set phy-handle property in board file */ + }; + }; }; }; diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts index 0077fc8510b7..aed83deaa991 100644 --- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -53,3 +53,20 @@ }; }; }; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + device-type = "ethernet-phy"; + reg = <8>; + }; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index 892c64e3f1e1..e06c37e91ac6 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -16,11 +16,12 @@ aliases { gpio0 = &gpio0; }; + intc: interrupt-controller { - compatible = "marvell,orion-intc", "marvell,intc"; + compatible = "marvell,orion-intc"; interrupt-controller; #interrupt-cells = <1>; - reg = <0xf1020204 0x04>; + reg = <0xf1020200 0x08>; }; ocp@f1000000 { @@ -132,5 +133,34 @@ interrupts = <28>; status = "okay"; }; + + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <22>; + status = "disabled"; + + /* add phy nodes in board file */ + }; + + eth: ethernet-controller@72000 { + compatible = "marvell,orion-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72000 0x4000>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethernet-port@0 { + device_type = "network"; + compatible = "marvell,orion-eth-port"; + reg = <0>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + /* set phy-handle property in board file */ + }; + }; }; }; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index f603c6946c29..e657a9db1666 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -50,3 +50,25 @@ }; }; }; + +&i2c5 { + vdd_dvfs: max8973@1b { + compatible = "maxim,max8973"; + reg = <0x1b>; + + regulator-min-microvolt = <935000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_dvfs>; + operating-points = < + /* kHz uV */ + 1950000 1115000 + 1462500 995000 + >; + voltage-tolerance = <1>; /* 1% */ +}; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 4ff2019c0e30..6ce699be6095 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -85,4 +85,130 @@ interrupt-parent = <&gic>; interrupts = <0 69 4>; }; + + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 174 0x4>; + }; + + i2c1: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 175 0x4>; + }; + + i2c2: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6520000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 176 0x4>; + }; + + i2c3: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6530000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 177 0x4>; + }; + + i2c4: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6540000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 178 0x4>; + }; + + i2c5: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 179 0x4>; + }; + + i2c6: i2c@e6550000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6550000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 184 0x4>; + }; + + i2c7: i2c@e6560000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6560000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 185 0x4>; + }; + + i2c8: i2c@e6570000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6570000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 173 0x4>; + }; + + mmcif0: mmcif@ee200000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupt-parent = <&gic>; + interrupts = <0 169 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + mmcif1: mmcif@ee220000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee220000 0 0x80>; + interrupt-parent = <&gic>; + interrupts = <0 170 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + sdhi0: sdhi@ee100000 { + compatible = "renesas,r8a73a4-sdhi"; + reg = <0 0xee100000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 165 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi1: sdhi@ee120000 { + compatible = "renesas,r8a73a4-sdhi"; + reg = <0 0xee120000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 166 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi2: sdhi@ee140000 { + compatible = "renesas,r8a73a4-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 167 4>; + cap-sd-highspeed; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 339d9b11721c..9cd882028095 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -54,4 +54,58 @@ interrupt-parent = <&gic>; interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>; }; + + mmcif0: mmcif@ee200000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupt-parent = <&gic>; + interrupts = <0 169 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + mmcif1: mmcif@ee220000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee220000 0 0x80>; + interrupt-parent = <&gic>; + interrupts = <0 170 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + sdhi0: sdhi@ee100000 { + compatible = "renesas,r8a7790-sdhi"; + reg = <0 0xee100000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 165 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi1: sdhi@ee120000 { + compatible = "renesas,r8a7790-sdhi"; + reg = <0 0xee120000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 166 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi2: sdhi@ee140000 { + compatible = "renesas,r8a7790-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 167 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi3: sdhi@ee160000 { + compatible = "renesas,r8a7790-sdhi"; + reg = <0 0xee160000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 168 4>; + cap-sd-highspeed; + status = "disabled"; + }; }; diff --git a/arch/arm/configs/ape6evm_defconfig b/arch/arm/configs/ape6evm_defconfig index dab5a7dfadc6..1ce39940795d 100644 --- a/arch/arm/configs/ape6evm_defconfig +++ b/arch/arm/configs/ape6evm_defconfig @@ -54,7 +54,8 @@ CONFIG_NETDEVICES=y CONFIG_SMC91X=y CONFIG_SMSC911X=y # CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set CONFIG_SERIAL_NONSTANDARD=y @@ -71,6 +72,9 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y # CONFIG_HID is not set # CONFIG_USB_SUPPORT is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y # CONFIG_IOMMU_SUPPORT is not set # CONFIG_DNOTIFY is not set CONFIG_TMPFS=y diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig index 65edf6d47215..6e4931097dd4 100644 --- a/arch/arm/configs/bcm_defconfig +++ b/arch/arm/configs/bcm_defconfig @@ -42,6 +42,18 @@ CONFIG_VFP=y CONFIG_NEON=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_PM_RUNTIME=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=y +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_PROC_DEVICETREE=y @@ -112,7 +124,6 @@ CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=110 CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y CONFIG_DEBUG_INFO=y # CONFIG_FTRACE is not set -CONFIG_DEBUG_LL=y CONFIG_CRC_CCITT=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index 4364eff5b01e..110105476848 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -13,6 +13,9 @@ CONFIG_ARCH_DOVE=y CONFIG_MACH_DOVE_DB=y CONFIG_MACH_CM_A510=y CONFIG_MACH_DOVE_DT=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_MVEBU=y CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -78,6 +81,7 @@ CONFIG_SPI_ORION=y CONFIG_THERMAL=y CONFIG_DOVE_THERMAL=y CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 0f2aa61911a3..0ae0eaebf6b2 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -10,49 +10,18 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_KIRKWOOD=y CONFIG_MACH_D2NET_V2=y -CONFIG_MACH_DB88F6281_BP=y -CONFIG_MACH_DOCKSTAR=y -CONFIG_MACH_ESATA_SHEEVAPLUG=y -CONFIG_MACH_GURUPLUG=y -CONFIG_MACH_INETSPACE_V2=y -CONFIG_MACH_MV88F6281GTW_GE=y CONFIG_MACH_NET2BIG_V2=y CONFIG_MACH_NET5BIG_V2=y -CONFIG_MACH_NETSPACE_MAX_V2=y -CONFIG_MACH_NETSPACE_V2=y CONFIG_MACH_OPENRD_BASE=y CONFIG_MACH_OPENRD_CLIENT=y CONFIG_MACH_OPENRD_ULTIMATE=y CONFIG_MACH_RD88F6192_NAS=y CONFIG_MACH_RD88F6281=y -CONFIG_MACH_SHEEVAPLUG=y CONFIG_MACH_T5325=y CONFIG_MACH_TS219=y CONFIG_MACH_TS41X=y -CONFIG_MACH_CLOUDBOX_DT=y -CONFIG_MACH_DB88F628X_BP_DT=y -CONFIG_MACH_DLINK_KIRKWOOD_DT=y -CONFIG_MACH_DOCKSTAR_DT=y -CONFIG_MACH_DREAMPLUG_DT=y -CONFIG_MACH_GOFLEXNET_DT=y -CONFIG_MACH_GURUPLUG_DT=y -CONFIG_MACH_IB62X0_DT=y -CONFIG_MACH_ICONNECT_DT=y -CONFIG_MACH_INETSPACE_V2_DT=y -CONFIG_MACH_IOMEGA_IX2_200_DT=y -CONFIG_MACH_KM_KIRKWOOD_DT=y -CONFIG_MACH_LSXL_DT=y -CONFIG_MACH_MPLCEC4_DT=y -CONFIG_MACH_NETSPACE_LITE_V2_DT=y -CONFIG_MACH_NETSPACE_MAX_V2_DT=y -CONFIG_MACH_NETSPACE_MINI_V2_DT=y -CONFIG_MACH_NETSPACE_V2_DT=y -CONFIG_MACH_NSA310_DT=y -CONFIG_MACH_OPENBLOCKS_A6_DT=y -CONFIG_MACH_READYNAS_DT=y -CONFIG_MACH_SHEEVAPLUG_DT=y -CONFIG_MACH_TOPKICK_DT=y -CONFIG_MACH_TS219_DT=y +CONFIG_ARCH_KIRKWOOD_DT=y +CONFIG_MACH_MV88F6281GTW_GE_DT=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_PCI_MVEBU=y CONFIG_PREEMPT=y @@ -92,6 +61,7 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ORION=y CONFIG_BLK_DEV_LOOP=y +CONFIG_EEPROM_AT24=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=m @@ -100,9 +70,9 @@ CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y -CONFIG_MII=y CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_MV643XX_ETH=y +CONFIG_R8169=y CONFIG_MARVELL_PHY=y CONFIG_LIBERTAS=y CONFIG_LIBERTAS_SDIO=y @@ -123,9 +93,11 @@ CONFIG_I2C_MV64XXX=y CONFIG_SPI=y CONFIG_SPI_ORION=y CONFIG_GPIO_SYSFS=y -# CONFIG_HWMON is not set +CONFIG_SENSORS_ADT7475=y +CONFIG_SENSORS_LM63=y +CONFIG_SENSORS_LM75=y +CONFIG_SENSORS_LM85=y CONFIG_THERMAL=y -CONFIG_KIRKWOOD_THERMAL=y CONFIG_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_HID_DRAGONRISE=y @@ -164,6 +136,8 @@ CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_RS5C372=y +CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_S35390A=y CONFIG_RTC_DRV_MV=y CONFIG_DMADEVICES=y @@ -171,6 +145,7 @@ CONFIG_MV_XOR=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_UDF_FS=m @@ -186,12 +161,12 @@ CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_NLS_UTF8=y -CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set -CONFIG_DEBUG_INFO=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/lager_defconfig b/arch/arm/configs/lager_defconfig new file mode 100644 index 000000000000..e777ef22b801 --- /dev/null +++ b/arch/arm/configs/lager_defconfig @@ -0,0 +1,120 @@ +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y +CONFIG_SLAB=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_R8A7790=y +CONFIG_MACH_LAGER=y +# CONFIG_SH_TIMER_TMU is not set +# CONFIG_EM_TIMER_STI is not set +CONFIG_ARM_ERRATA_430973=y +CONFIG_ARM_ERRATA_458693=y +CONFIG_ARM_ERRATA_460075=y +CONFIG_ARM_ERRATA_743622=y +CONFIG_ARM_ERRATA_754322=y +CONFIG_HAVE_ARM_ARCH_TIMER=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_KEXEC=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_PM_RUNTIME=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_NETDEVICES=y +# CONFIG_NET_CORE is not set +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +CONFIG_SH_ETH=y +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=10 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_GPIO=y +CONFIG_I2C_SH_MOBILE=y +CONFIG_GPIO_SH_PFC=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_RCAR=y +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_RCAR_THERMAL=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +CONFIG_MMC_SDHI=y +CONFIG_MMC_SH_MMCIF=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_RTC_CLASS=y +CONFIG_DMADEVICES=y +CONFIG_SH_DMAE=y +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_DNOTIFY is not set +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_CONFIGFS_FS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_V4_1=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_ARM_UNWIND is not set +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 494e70aeb9e1..82e4040b4c17 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -29,6 +29,7 @@ CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on" CONFIG_CMDLINE_FORCE=y CONFIG_KEXEC=y diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index 731814e2c189..594d706b641f 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -39,6 +39,8 @@ CONFIG_MVNETA=y CONFIG_MARVELL_PHY=y CONFIG_MWIFIEX=y CONFIG_MWIFIEX_SDIO=y +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_I2C=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 1effb43dab80..8c284fff0281 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -1,3 +1,4 @@ +CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y @@ -26,8 +27,11 @@ CONFIG_ARCH_TEGRA=y CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y CONFIG_ARCH_TEGRA_114_SOC=y -CONFIG_TEGRA_PCI=y CONFIG_TEGRA_EMC_SCALING_ENABLE=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_TEGRA=y +CONFIG_PCIEPORTBUS=y CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_AEABI=y @@ -91,6 +95,7 @@ CONFIG_ISL29003=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y +CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y @@ -105,6 +110,7 @@ CONFIG_RT2800USB=m CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_TEGRA=y +CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y # CONFIG_LEGACY_PTYS is not set @@ -177,6 +183,7 @@ CONFIG_SND_SOC_TEGRA_WM8903=y CONFIG_SND_SOC_TEGRA_TRIMSLICE=y CONFIG_SND_SOC_TEGRA_ALC5632=y CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_ACM=y diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index f11289519c39..69d67f714a2f 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -12,6 +12,7 @@ config ARCH_BCM select GPIO_BCM select SPARSE_IRQ select TICK_ONESHOT + select CACHE_L2X0 help This enables support for system based on Broadcom SoCs. It currently supports the 'BCM281XX' family, which includes diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 6adb6aecf48f..e3d03033a7e2 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -1,5 +1,5 @@ # -# Copyright (C) 2012 Broadcom Corporation +# Copyright (C) 2012-2013 Broadcom Corporation # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as @@ -10,6 +10,6 @@ # of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. -obj-$(CONFIG_ARCH_BCM) := board_bcm.o bcm_kona_smc.o bcm_kona_smc_asm.o +obj-$(CONFIG_ARCH_BCM) := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec) diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c index 56d9d19b2470..5e31e918f325 100644 --- a/arch/arm/mach-bcm/bcm_kona_smc.c +++ b/arch/arm/mach-bcm/bcm_kona_smc.c @@ -36,18 +36,20 @@ struct bcm_kona_smc_data { }; static const struct of_device_id bcm_kona_smc_ids[] __initconst = { - {.compatible = "bcm,kona-smc"}, + {.compatible = "brcm,kona-smc"}, + {.compatible = "bcm,kona-smc"}, /* deprecated name */ {}, }; /* Map in the bounce area */ -void __init bcm_kona_smc_init(void) +int __init bcm_kona_smc_init(void) { struct device_node *node; /* Read buffer addr and size from the device tree node */ node = of_find_matching_node(NULL, bcm_kona_smc_ids); - BUG_ON(!node); + if (!node) + return -ENODEV; /* Don't care about size or flags of the DT node */ bridge_data.buffer_addr = @@ -59,7 +61,9 @@ void __init bcm_kona_smc_init(void) bridge_data.initialized = 1; - pr_info("Secure API initialized!\n"); + pr_info("Kona Secure API initialized\n"); + + return 0; } /* __bcm_kona_smc() should only run on CPU 0, with pre-emption disabled */ diff --git a/arch/arm/mach-bcm/bcm_kona_smc.h b/arch/arm/mach-bcm/bcm_kona_smc.h index 3bedbed1c21b..d098a7e76744 100644 --- a/arch/arm/mach-bcm/bcm_kona_smc.h +++ b/arch/arm/mach-bcm/bcm_kona_smc.h @@ -64,7 +64,7 @@ #define SSAPI_BRCM_START_VC_CORE 0x0E000008 #ifndef __ASSEMBLY__ -extern void bcm_kona_smc_init(void); +extern int __init bcm_kona_smc_init(void); extern unsigned bcm_kona_smc(unsigned service_id, unsigned arg0, diff --git a/arch/arm/mach-bcm/board_bcm.c b/arch/arm/mach-bcm/board_bcm281xx.c index 28599326d4ad..8d9f931164bb 100644 --- a/arch/arm/mach-bcm/board_bcm.c +++ b/arch/arm/mach-bcm/board_bcm281xx.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2012 Broadcom Corporation + * Copyright (C) 2012-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -21,23 +21,39 @@ #include <asm/mach/time.h> #include <asm/hardware/cache-l2x0.h> - #include "bcm_kona_smc.h" +#include "kona.h" static int __init kona_l2_cache_init(void) { if (!IS_ENABLED(CONFIG_CACHE_L2X0)) return 0; + if (bcm_kona_smc_init() < 0) { + pr_info("Kona secure API not available. Skipping L2 init\n"); + return 0; + } + bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0); /* * The aux_val and aux_mask have no effect since L2 cache is already * enabled. Pass 0s for aux_val and 1s for aux_mask for default value. */ - l2x0_of_init(0, ~0); + return l2x0_of_init(0, ~0); +} - return 0; +static void bcm_board_setup_restart(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "brcm,bcm11351"); + if (np) { + if (of_device_is_available(np)) + bcm_kona_setup_restart(); + of_node_put(np); + } + /* Restart setup for other boards goes here */ } static void __init board_init(void) @@ -45,15 +61,15 @@ static void __init board_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, &platform_bus); - bcm_kona_smc_init(); - + bcm_board_setup_restart(); kona_l2_cache_init(); } -static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, }; +static const char * const bcm11351_dt_compat[] = { "brcm,bcm11351", NULL, }; DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor") .init_time = clocksource_of_init, .init_machine = board_init, + .restart = bcm_kona_restart, .dt_compat = bcm11351_dt_compat, MACHINE_END diff --git a/arch/arm/mach-bcm/kona.c b/arch/arm/mach-bcm/kona.c new file mode 100644 index 000000000000..6939d9017f63 --- /dev/null +++ b/arch/arm/mach-bcm/kona.c @@ -0,0 +1,65 @@ +/* + * Copyright (C) 2013 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/of_address.h> +#include <asm/io.h> + +#include "kona.h" + +static void __iomem *watchdog_base; + +void bcm_kona_setup_restart(void) +{ + struct device_node *np_wdog; + + /* + * The assumption is that whoever calls bcm_kona_setup_restart() + * also needs a Kona Watchdog Timer entry in Device Tree, i.e. we + * report an error if the DT entry is missing. + */ + np_wdog = of_find_compatible_node(NULL, NULL, "brcm,kona-wdt"); + if (!np_wdog) { + pr_err("brcm,kona-wdt not found in DT, reboot disabled\n"); + return; + } + watchdog_base = of_iomap(np_wdog, 0); + WARN(!watchdog_base, "failed to map watchdog base"); + of_node_put(np_wdog); +} + +#define SECWDOG_OFFSET 0x00000000 +#define SECWDOG_RESERVED_MASK 0xE2000000 +#define SECWDOG_WD_LOAD_FLAG_MASK 0x10000000 +#define SECWDOG_EN_MASK 0x08000000 +#define SECWDOG_SRSTEN_MASK 0x04000000 +#define SECWDOG_CLKS_SHIFT 20 +#define SECWDOG_LOCK_SHIFT 0 + +void bcm_kona_restart(enum reboot_mode mode, const char *cmd) +{ + uint32_t val; + + if (!watchdog_base) + panic("Watchdog not mapped. Reboot failed.\n"); + + /* Enable watchdog2 with very short timeout. */ + val = readl(watchdog_base + SECWDOG_OFFSET); + val &= SECWDOG_RESERVED_MASK | SECWDOG_WD_LOAD_FLAG_MASK; + val |= SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK | + (0x8 << SECWDOG_CLKS_SHIFT) | + (0x8 << SECWDOG_LOCK_SHIFT); + writel(val, watchdog_base + SECWDOG_OFFSET); + + while (1) + ; +} diff --git a/arch/arm/mach-bcm/kona.h b/arch/arm/mach-bcm/kona.h new file mode 100644 index 000000000000..291eca3e06ff --- /dev/null +++ b/arch/arm/mach-bcm/kona.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2013 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/reboot.h> + +void bcm_kona_setup_restart(void); +void bcm_kona_restart(enum reboot_mode mode, const char *cmd); diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig index dff7b2fd4e20..0bc7cdf8cf46 100644 --- a/arch/arm/mach-dove/Kconfig +++ b/arch/arm/mach-dove/Kconfig @@ -23,6 +23,8 @@ config MACH_CM_A510 config MACH_DOVE_DT bool "Marvell Dove Flattened Device Tree" select DOVE_CLK + select ORION_IRQCHIP + select ORION_TIMER select REGULATOR select REGULATOR_FIXED_VOLTAGE select USE_OF diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile index 4d9d2ffc4535..cbc5c0618788 100644 --- a/arch/arm/mach-dove/Makefile +++ b/arch/arm/mach-dove/Makefile @@ -1,5 +1,5 @@ -obj-y += common.o irq.o -obj-$(CONFIG_DOVE_LEGACY) += mpp.o +obj-y += common.o +obj-$(CONFIG_DOVE_LEGACY) += irq.o mpp.o obj-$(CONFIG_PCI) += pcie.o obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o obj-$(CONFIG_MACH_DOVE_DT) += board-dt.o diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c index f3755ac81148..49f72a848423 100644 --- a/arch/arm/mach-dove/board-dt.c +++ b/arch/arm/mach-dove/board-dt.c @@ -10,11 +10,14 @@ #include <linux/init.h> #include <linux/clk-provider.h> +#include <linux/clocksource.h> +#include <linux/irqchip.h> #include <linux/of.h> #include <linux/of_platform.h> #include <linux/platform_data/usb-ehci-orion.h> #include <asm/hardware/cache-tauros2.h> #include <asm/mach/arch.h> +#include <mach/dove.h> #include <mach/pm.h> #include <plat/common.h> #include <plat/irq.h> @@ -33,10 +36,6 @@ static void __init dove_legacy_clk_init(void) clkspec.np = np; clkspec.args_count = 1; - clkspec.args[0] = CLOCK_GATING_BIT_GBE; - orion_clkdev_add(NULL, "mv643xx_eth_port.0", - of_clk_get_from_provider(&clkspec)); - clkspec.args[0] = CLOCK_GATING_BIT_PCIE0; orion_clkdev_add("0", "pcie", of_clk_get_from_provider(&clkspec)); @@ -46,15 +45,18 @@ static void __init dove_legacy_clk_init(void) of_clk_get_from_provider(&clkspec)); } -static void __init dove_of_clk_init(void) +static void __init dove_dt_time_init(void) { of_clk_init(NULL); - dove_legacy_clk_init(); + clocksource_of_init(); } -static struct mv643xx_eth_platform_data dove_dt_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT, -}; +static void __init dove_dt_init_early(void) +{ + mvebu_mbus_init("marvell,dove-mbus", + BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, + DOVE_MC_WINS_BASE, DOVE_MC_WINS_SZ); +} static void __init dove_dt_init(void) { @@ -65,11 +67,10 @@ static void __init dove_dt_init(void) #endif dove_setup_cpu_wins(); - /* Setup root of clk tree */ - dove_of_clk_init(); + /* Setup clocks for legacy devices */ + dove_legacy_clk_init(); /* Internal devices not ported to DT yet */ - dove_ge00_init(&dove_dt_ge00_data); dove_pcie_init(1, 1); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); @@ -82,9 +83,8 @@ static const char * const dove_dt_board_compat[] = { DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)") .map_io = dove_map_io, - .init_early = dove_init_early, - .init_irq = orion_dt_init_irq, - .init_time = dove_timer_init, + .init_early = dove_dt_init_early, + .init_time = dove_dt_time_init, .init_machine = dove_dt_init, .restart = dove_restart, .dt_compat = dove_dt_board_compat, diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index b634f9650a7b..fe8319ad3158 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -2,67 +2,32 @@ if ARCH_KIRKWOOD menu "Marvell Kirkwood Implementations" +config KIRKWOOD_LEGACY + bool + config MACH_D2NET_V2 bool "LaCie d2 Network v2 NAS Board" + select KIRKWOOD_LEGACY help Say 'Y' here if you want your kernel to support the LaCie d2 Network v2 NAS. -config MACH_DOCKSTAR - bool "Seagate FreeAgent DockStar" - help - Say 'Y' here if you want your kernel to support the - Seagate FreeAgent DockStar. - -config MACH_ESATA_SHEEVAPLUG - bool "Marvell eSATA SheevaPlug Reference Board" - help - Say 'Y' here if you want your kernel to support the - Marvell eSATA SheevaPlug Reference Board. - -config MACH_GURUPLUG - bool "Marvell GuruPlug Reference Board" - help - Say 'Y' here if you want your kernel to support the - Marvell GuruPlug Reference Board. - -config MACH_INETSPACE_V2 - bool "LaCie Internet Space v2 NAS Board" - help - Say 'Y' here if you want your kernel to support the - LaCie Internet Space v2 NAS. - -config MACH_MV88F6281GTW_GE - bool "Marvell 88F6281 GTW GE Board" - help - Say 'Y' here if you want your kernel to support the - Marvell 88F6281 GTW GE Board. - config MACH_NET2BIG_V2 bool "LaCie 2Big Network v2 NAS Board" + select KIRKWOOD_LEGACY help Say 'Y' here if you want your kernel to support the LaCie 2Big Network v2 NAS. config MACH_NET5BIG_V2 bool "LaCie 5Big Network v2 NAS Board" + select KIRKWOOD_LEGACY help Say 'Y' here if you want your kernel to support the LaCie 5Big Network v2 NAS. -config MACH_NETSPACE_MAX_V2 - bool "LaCie Network Space Max v2 NAS Board" - help - Say 'Y' here if you want your kernel to support the - LaCie Network Space Max v2 NAS. - -config MACH_NETSPACE_V2 - bool "LaCie Network Space v2 NAS Board" - help - Say 'Y' here if you want your kernel to support the - LaCie Network Space v2 NAS. - config MACH_OPENRD + select KIRKWOOD_LEGACY bool config MACH_OPENRD_BASE @@ -88,30 +53,28 @@ config MACH_OPENRD_ULTIMATE config MACH_RD88F6192_NAS bool "Marvell RD-88F6192-NAS Reference Board" + select KIRKWOOD_LEGACY help Say 'Y' here if you want your kernel to support the Marvell RD-88F6192-NAS Reference Board. config MACH_RD88F6281 bool "Marvell RD-88F6281 Reference Board" + select KIRKWOOD_LEGACY help Say 'Y' here if you want your kernel to support the Marvell RD-88F6281 Reference Board. -config MACH_SHEEVAPLUG - bool "Marvell SheevaPlug Reference Board" - help - Say 'Y' here if you want your kernel to support the - Marvell SheevaPlug Reference Board. - config MACH_T5325 bool "HP t5325 Thin Client" + select KIRKWOOD_LEGACY help Say 'Y' here if you want your kernel to support the HP t5325 Thin Client. config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" + select KIRKWOOD_LEGACY help Say 'Y' here if you want your kernel to support the QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and @@ -119,6 +82,7 @@ config MACH_TS219 config MACH_TS41X bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS" + select KIRKWOOD_LEGACY help Say 'Y' here if you want your kernel to support the QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo @@ -129,6 +93,9 @@ comment "Device tree entries" config ARCH_KIRKWOOD_DT bool "Marvell Kirkwood Flattened Device Tree" select KIRKWOOD_CLK + select OF_IRQ + select ORION_IRQCHIP + select ORION_TIMER select POWER_SUPPLY select POWER_RESET select POWER_RESET_GPIO @@ -139,184 +106,12 @@ config ARCH_KIRKWOOD_DT Say 'Y' here if you want your kernel to support the Marvell Kirkwood using flattened device tree. -config MACH_CLOUDBOX_DT - bool "LaCie CloudBox NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - CloudBox NAS, using Flattened Device Tree. - -config MACH_DB88F628X_BP_DT - bool "Marvell DB-88F628x-BP Development Board (Flattened Device Tree)" - help - Say 'Y' here if you want your kernel to support the Marvell - DB-88F6281-BP and DB-88F6282-BP Development Board (Flattened - Device Tree). - -config MACH_DLINK_KIRKWOOD_DT - bool "D-Link Kirkwood-based NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Kirkwood-based D-Link NASes such as DNS-320 & DNS-325, - using Flattened Device Tree. - -config MACH_DOCKSTAR_DT - bool "Seagate FreeAgent Dockstar (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT +config MACH_MV88F6281GTW_GE_DT + bool "Marvell 88F6281 GTW GE Board (Flattened Device Tree)" + depends on ARCH_KIRKWOOD_DT help Say 'Y' here if you want your kernel to support the - Seagate FreeAgent Dockstar (Flattened Device Tree). - -config MACH_DREAMPLUG_DT - bool "Marvell DreamPlug (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Marvell DreamPlug (Flattened Device Tree). - -config MACH_GOFLEXNET_DT - bool "Seagate GoFlex Net (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Seagate GoFlex Net (Flattened Device Tree). - -config MACH_GURUPLUG_DT - bool "Marvell GuruPlug Reference Board (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Marvell GuruPlug Reference Board (Flattened Device Tree). - -config MACH_IB62X0_DT - bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - RaidSonic IB-NAS6210 & IB-NAS6220 devices, using - Flattened Device Tree. - -config MACH_ICONNECT_DT - bool "Iomega Iconnect (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here to enable Iomega Iconnect support. - -config MACH_INETSPACE_V2_DT - bool "LaCie Internet Space v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Internet Space v2 NAS, using Flattened Device Tree. - -config MACH_IOMEGA_IX2_200_DT - bool "Iomega StorCenter ix2-200 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Iomega StorCenter ix2-200 (Flattened Device Tree). - -config MACH_KM_KIRKWOOD_DT - bool "Keymile Kirkwood Reference Design (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Keymile Kirkwood Reference Desgin, using Flattened Device Tree. - -config MACH_LSXL_DT - bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - select POWER_RESET_RESTART - help - Say 'Y' here if you want your kernel to support the - Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using - Flattened Device Tree. - -config MACH_MPLCEC4_DT - bool "MPL CEC4 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - MPL CEC4 (Flattened Device Tree). - -config MACH_NETSPACE_LITE_V2_DT - bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Network Space Lite v2 NAS, using Flattened Device Tree. - -config MACH_NETSPACE_MAX_V2_DT - bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Network Space Max v2 NAS, using Flattened Device Tree. - -config MACH_NETSPACE_MINI_V2_DT - bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Network Space Mini v2 NAS using Flattened Device Tree. - - This board is embedded in a product named CloudBox, which - provides automatic backup on a 100GB cloud storage. This - should not confused with a more recent LaCie NAS also named - CloudBox. For this last, the disk capacity is 1TB or above. - -config MACH_NETSPACE_V2_DT - bool "LaCie Network Space v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Network Space v2 NAS, using Flattened Device Tree. - -config MACH_OPENBLOCKS_A6_DT - bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Plat'Home OpenBlocks A6 (Flattened Device Tree). - -config MACH_READYNAS_DT - bool "NETGEAR ReadyNAS Duo v2 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - select ARM_APPENDED_DTB - select ARM_ATAG_DTB_COMPAT - help - Say 'Y' here if you want your kernel to support the - NETGEAR ReadyNAS Duo v2 using Fattened Device Tree. - -config MACH_SHEEVAPLUG_DT - bool "Marvell (eSATA) SheevaPlug (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Marvell (eSATA) SheevaPlug (Flattened Device Tree). - -config MACH_TOPKICK_DT - bool "USI Topkick (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - USI Topkick, using Flattened Device Tree - -config MACH_TS219_DT - bool "Device Tree for QNAP TS-11X, TS-21X NAS" - select ARCH_KIRKWOOD_DT - select ARM_APPENDED_DTB - select ARM_ATAG_DTB_COMPAT - select POWER_RESET_QNAP - help - Say 'Y' here if you want your kernel to support the QNAP - TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and - TS-219P+ Turbo NAS devices using Fattened Device Tree. - There are two different Device Tree descriptions, depending - on if the device is based on an if the board uses the MV6281 - or MV6282. If you have the wrong one, the buttons will not - work. + Marvell 88F6281 GTW GE Board (Flattened Device Tree). endmenu diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index ac4cd75dd499..d1f8e3d0793b 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -1,44 +1,14 @@ -obj-y += common.o irq.o pcie.o mpp.o - +obj-y += common.o pcie.o +obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o -obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o -obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o -obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o -obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_T5325) += t5325-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o -obj-$(CONFIG_MACH_CLOUDBOX_DT) += board-ns2.o -obj-$(CONFIG_MACH_DB88F628X_BP_DT) += board-db88f628x-bp.o -obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o -obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o -obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o -obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o -obj-$(CONFIG_MACH_GURUPLUG_DT) += board-guruplug.o -obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o -obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o -obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o -obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o -obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o -obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o -obj-$(CONFIG_MACH_MPLCEC4_DT) += board-mplcec4.o -obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o -obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o -obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o -obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o -obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o -obj-$(CONFIG_MACH_READYNAS_DT) += board-readynas.o -obj-$(CONFIG_MACH_SHEEVAPLUG_DT) += board-sheevaplug.o -obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o -obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o +obj-$(CONFIG_MACH_MV88F6281GTW_GE_DT) += board-mv88f6281gtw_ge.o diff --git a/arch/arm/mach-kirkwood/board-db88f628x-bp.c b/arch/arm/mach-kirkwood/board-db88f628x-bp.c deleted file mode 100644 index 2f574bc8ed40..000000000000 --- a/arch/arm/mach-kirkwood/board-db88f628x-bp.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Saeed Bishara <saeed@marvell.com> - * - * Marvell DB-88F628{1,2}-BP Development Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/of.h> -#include <linux/mv643xx_eth.h> -#include "common.h" - -static struct mv643xx_eth_platform_data db88f628x_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -void __init db88f628x_init(void) -{ - kirkwood_ge00_init(&db88f628x_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c deleted file mode 100644 index a1aa87f09180..000000000000 --- a/arch/arm/mach-kirkwood/board-dnskw.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright 2012 (C), Jamie Lentin <jm@lentin.co.uk> - * - * arch/arm/mach-kirkwood/board-dnskw.c - * - * D-link DNS-320 & DNS-325 NAS Init for drivers not converted to - * flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mv643xx_eth.h> -#include <linux/gpio.h> -#include "common.h" - -static struct mv643xx_eth_platform_data dnskw_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/* Register any GPIO for output and set the value */ -static void __init dnskw_gpio_register(unsigned gpio, char *name, int def) -{ - if (gpio_request(gpio, name) == 0 && - gpio_direction_output(gpio, 0) == 0) { - gpio_set_value(gpio, def); - if (gpio_export(gpio, 0) != 0) - pr_err("dnskw: Failed to export GPIO %s\n", name); - } else - pr_err("dnskw: Failed to register %s\n", name); -} - -void __init dnskw_init(void) -{ - kirkwood_ge00_init(&dnskw_ge00_data); - - /* Set NAS to turn back on after a power failure */ - dnskw_gpio_register(37, "dnskw:power:recover", 1); -} diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c deleted file mode 100644 index d7196db33984..000000000000 --- a/arch/arm/mach-kirkwood/board-dockstar.c +++ /dev/null @@ -1,32 +0,0 @@ -/* - * arch/arm/mach-kirkwood/board-dockstar.c - * - * Seagate FreeAgent Dockstar Board Init for drivers not converted to - * flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * Copied and modified for Seagate GoFlex Net support by - * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's - * GoFlex kernel patches. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mv643xx_eth.h> -#include "common.h" - -static struct mv643xx_eth_platform_data dockstar_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -void __init dockstar_dt_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&dockstar_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c deleted file mode 100644 index 0903242c00dc..000000000000 --- a/arch/arm/mach-kirkwood/board-dreamplug.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> - * - * arch/arm/mach-kirkwood/board-dreamplug.c - * - * Marvell DreamPlug Reference Board Init for drivers not converted to - * flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mv643xx_eth.h> -#include <linux/gpio.h> -#include "common.h" - -static struct mv643xx_eth_platform_data dreamplug_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct mv643xx_eth_platform_data dreamplug_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(1), -}; - -void __init dreamplug_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&dreamplug_ge00_data); - kirkwood_ge01_init(&dreamplug_ge01_data); -} diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 6e122ed3282f..b1872e93a78d 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -15,6 +15,9 @@ #include <linux/of.h> #include <linux/of_platform.h> #include <linux/clk-provider.h> +#include <linux/clocksource.h> +#include <linux/dma-mapping.h> +#include <linux/irqchip.h> #include <linux/kexec.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -49,10 +52,6 @@ static void __init kirkwood_legacy_clk_init(void) orion_clkdev_add("1", "pcie", of_clk_get_from_provider(&clkspec)); - clkspec.args[0] = CGC_BIT_SDIO; - orion_clkdev_add(NULL, "mvsdio", - of_clk_get_from_provider(&clkspec)); - /* * The ethernet interfaces forget the MAC address assigned by * u-boot if the clocks are turned off. Until proper DT support @@ -60,19 +59,24 @@ static void __init kirkwood_legacy_clk_init(void) */ clkspec.args[0] = CGC_BIT_GE0; clk = of_clk_get_from_provider(&clkspec); - orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk); clk_prepare_enable(clk); clkspec.args[0] = CGC_BIT_GE1; clk = of_clk_get_from_provider(&clkspec); - orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk); clk_prepare_enable(clk); } -static void __init kirkwood_of_clk_init(void) +static void __init kirkwood_dt_time_init(void) { of_clk_init(NULL); - kirkwood_legacy_clk_init(); + clocksource_of_init(); +} + +static void __init kirkwood_dt_init_early(void) +{ + mvebu_mbus_init("marvell,kirkwood-mbus", + BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, + DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ); } static void __init kirkwood_dt_init(void) @@ -93,8 +97,8 @@ static void __init kirkwood_dt_init(void) kirkwood_cpufreq_init(); - /* Setup root of clk tree */ - kirkwood_of_clk_init(); + /* Setup clocks for legacy devices */ + kirkwood_legacy_clk_init(); kirkwood_cpuidle_init(); @@ -102,105 +106,22 @@ static void __init kirkwood_dt_init(void) kexec_reinit = kirkwood_enable_pcie; #endif - if (of_machine_is_compatible("globalscale,dreamplug")) - dreamplug_init(); - - if (of_machine_is_compatible("globalscale,guruplug")) - guruplug_dt_init(); - - if (of_machine_is_compatible("globalscale,sheevaplug")) - sheevaplug_dt_init(); - - if (of_machine_is_compatible("dlink,dns-kirkwood")) - dnskw_init(); - - if (of_machine_is_compatible("iom,iconnect")) - iconnect_init(); - - if (of_machine_is_compatible("raidsonic,ib-nas62x0")) - ib62x0_init(); - - if (of_machine_is_compatible("qnap,ts219")) - qnap_dt_ts219_init(); - - if (of_machine_is_compatible("seagate,dockstar")) - dockstar_dt_init(); - - if (of_machine_is_compatible("seagate,goflexnet")) - goflexnet_init(); - - if (of_machine_is_compatible("buffalo,lsxl")) - lsxl_init(); - - if (of_machine_is_compatible("iom,ix2-200")) - iomega_ix2_200_init(); - - if (of_machine_is_compatible("keymile,km_kirkwood")) - km_kirkwood_init(); - - if (of_machine_is_compatible("lacie,cloudbox") || - of_machine_is_compatible("lacie,inetspace_v2") || - of_machine_is_compatible("lacie,netspace_lite_v2") || - of_machine_is_compatible("lacie,netspace_max_v2") || - of_machine_is_compatible("lacie,netspace_mini_v2") || - of_machine_is_compatible("lacie,netspace_v2")) - ns2_init(); - - if (of_machine_is_compatible("marvell,db-88f6281-bp") || - of_machine_is_compatible("marvell,db-88f6282-bp")) - db88f628x_init(); - - if (of_machine_is_compatible("mpl,cec4")) - mplcec4_init(); - - if (of_machine_is_compatible("netgear,readynas-duo-v2")) - netgear_readynas_init(); - - if (of_machine_is_compatible("plathome,openblocks-a6")) - openblocks_a6_init(); - - if (of_machine_is_compatible("usi,topkick")) - usi_topkick_init(); + if (of_machine_is_compatible("marvell,mv88f6281gtw-ge")) + mv88f6281gtw_ge_init(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char * const kirkwood_dt_board_compat[] = { - "globalscale,dreamplug", - "globalscale,guruplug", - "globalscale,sheevaplug", - "dlink,dns-320", - "dlink,dns-325", - "iom,iconnect", - "raidsonic,ib-nas62x0", - "qnap,ts219", - "seagate,dockstar", - "seagate,goflexnet", - "buffalo,lsxl", - "iom,ix2-200", - "keymile,km_kirkwood", - "lacie,cloudbox", - "lacie,inetspace_v2", - "lacie,netspace_lite_v2", - "lacie,netspace_max_v2", - "lacie,netspace_mini_v2", - "lacie,netspace_v2", - "marvell,db-88f6281-bp", - "marvell,db-88f6282-bp", - "mpl,cec4", - "netgear,readynas-duo-v2", - "plathome,openblocks-a6", - "usi,topkick", - "zyxel,nsa310", + "marvell,kirkwood", NULL }; DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") /* Maintainer: Jason Cooper <jason@lakedaemon.net> */ .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = orion_dt_init_irq, - .init_time = kirkwood_timer_init, + .init_early = kirkwood_dt_init_early, + .init_time = kirkwood_dt_time_init, .init_machine = kirkwood_dt_init, .restart = kirkwood_restart, .dt_compat = kirkwood_dt_board_compat, diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c deleted file mode 100644 index 9db979aec82e..000000000000 --- a/arch/arm/mach-kirkwood/board-goflexnet.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> - * - * arch/arm/mach-kirkwood/board-goflexnet.c - * - * Seagate GoFlext Net Board Init for drivers not converted to - * flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * Copied and modified for Seagate GoFlex Net support by - * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's - * GoFlex kernel patches. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mv643xx_eth.h> -#include "common.h" - -static struct mv643xx_eth_platform_data goflexnet_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -void __init goflexnet_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&goflexnet_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-guruplug.c b/arch/arm/mach-kirkwood/board-guruplug.c deleted file mode 100644 index a857163954a5..000000000000 --- a/arch/arm/mach-kirkwood/board-guruplug.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-kirkwood/board-guruplug.c - * - * Marvell Guruplug Reference Board Init for drivers not converted to - * flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mv643xx_eth.h> -#include <linux/gpio.h> -#include "common.h" - -static struct mv643xx_eth_platform_data guruplug_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct mv643xx_eth_platform_data guruplug_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(1), -}; - -void __init guruplug_dt_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&guruplug_ge00_data); - kirkwood_ge01_init(&guruplug_ge01_data); -} diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c deleted file mode 100644 index 9a857ae83984..000000000000 --- a/arch/arm/mach-kirkwood/board-ib62x0.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2012 (C), Simon Baatz <gmbnomis@gmail.com> - * - * arch/arm/mach-kirkwood/board-ib62x0.c - * - * RaidSonic ICY BOX IB-NAS6210 & IB-NAS6220 init for drivers not - * converted to flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mv643xx_eth.h> -#include "common.h" - -static struct mv643xx_eth_platform_data ib62x0_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -void __init ib62x0_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&ib62x0_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c deleted file mode 100644 index 98b5ad1bba90..000000000000 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/mach-kirkwood/board-iconnect.c - * - * Iomega i-connect Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/of.h> -#include <linux/mv643xx_eth.h> -#include "common.h" - -static struct mv643xx_eth_platform_data iconnect_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(11), -}; - -void __init iconnect_init(void) -{ - kirkwood_ge00_init(&iconnect_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c deleted file mode 100644 index e5f70415905a..000000000000 --- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * arch/arm/mach-kirkwood/board-iomega_ix2_200.c - * - * Iomega StorCenter ix2-200 - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mv643xx_eth.h> -#include <linux/ethtool.h> -#include "common.h" - -static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_NONE, - .speed = SPEED_1000, - .duplex = DUPLEX_FULL, -}; - -static struct mv643xx_eth_platform_data iomega_ix2_200_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(11), -}; - -void __init iomega_ix2_200_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&iomega_ix2_200_ge00_data); - kirkwood_ge01_init(&iomega_ix2_200_ge01_data); -} diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c deleted file mode 100644 index 44e4605ba0bf..000000000000 --- a/arch/arm/mach-kirkwood/board-km_kirkwood.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright 2012 2012 KEYMILE AG, CH-3097 Bern - * Valentin Longchamp <valentin.longchamp@keymile.com> - * - * arch/arm/mach-kirkwood/board-km_kirkwood.c - * - * Keymile km_kirkwood Reference Desing Init for drivers not converted to - * flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mv643xx_eth.h> -#include <linux/clk.h> -#include <linux/clk-private.h> -#include "common.h" - -static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -void __init km_kirkwood_init(void) -{ - struct clk *sata_clk; - /* - * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing - * SATA bits (14-15) of the Clock Gating Control Register. Since these - * devices are also not present in this variant, their clocks get - * disabled because unused when clk_disable_unused() gets called. - * That's why we change the flags to these clocks to CLK_IGNORE_UNUSED - */ - sata_clk = clk_get_sys("sata_mv.0", "0"); - if (!IS_ERR(sata_clk)) - sata_clk->flags |= CLK_IGNORE_UNUSED; - sata_clk = clk_get_sys("sata_mv.0", "1"); - if (!IS_ERR(sata_clk)) - sata_clk->flags |= CLK_IGNORE_UNUSED; - - kirkwood_ge00_init(&km_kirkwood_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c deleted file mode 100644 index 348395238df6..000000000000 --- a/arch/arm/mach-kirkwood/board-lsxl.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright 2012 (C), Michael Walle <michael@walle.cc> - * - * arch/arm/mach-kirkwood/board-lsxl.c - * - * Buffalo Linkstation LS-XHL and LS-CHLv2 init for drivers not - * converted to flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mv643xx_eth.h> -#include "common.h" - -static struct mv643xx_eth_platform_data lsxl_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct mv643xx_eth_platform_data lsxl_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -void __init lsxl_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - - kirkwood_ge00_init(&lsxl_ge00_data); - kirkwood_ge01_init(&lsxl_ge01_data); -} diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c deleted file mode 100644 index 938712e248f1..000000000000 --- a/arch/arm/mach-kirkwood/board-mplcec4.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) 2012 MPL AG, Switzerland - * Stefan Peter <s.peter@mpl.ch> - * - * arch/arm/mach-kirkwood/board-mplcec4.c - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mv643xx_eth.h> -#include "common.h" - -static struct mv643xx_eth_platform_data mplcec4_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(1), -}; - -static struct mv643xx_eth_platform_data mplcec4_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(2), -}; - -void __init mplcec4_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&mplcec4_ge00_data); - kirkwood_ge01_init(&mplcec4_ge01_data); -} - - - diff --git a/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c b/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c new file mode 100644 index 000000000000..ee5eea678c11 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c @@ -0,0 +1,50 @@ +/* + * arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c + * + * Marvell 88F6281 GTW GE Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/timer.h> +#include <linux/mv643xx_eth.h> +#include <linux/ethtool.h> +#include <linux/gpio.h> +#include <net/dsa.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <mach/kirkwood.h> +#include "common.h" + +static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_NONE, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, +}; + +static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = { + .port_names[0] = "lan1", + .port_names[1] = "lan2", + .port_names[2] = "lan3", + .port_names[3] = "lan4", + .port_names[4] = "wan", + .port_names[5] = "cpu", +}; + +static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = { + .nr_chips = 1, + .chip = &mv88f6281gtw_ge_switch_chip_data, +}; + +void __init mv88f6281gtw_ge_init(void) +{ + kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data); + kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ); +} diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c deleted file mode 100644 index f8f660525ace..000000000000 --- a/arch/arm/mach-kirkwood/board-ns2.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright 2012 (C), Simon Guinot <simon.guinot@sequanux.org> - * - * arch/arm/mach-kirkwood/board-ns2.c - * - * LaCie Network Space v2 board (and parents) initialization for drivers - * not converted to flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mv643xx_eth.h> -#include <linux/of.h> -#include "common.h" - -static struct mv643xx_eth_platform_data ns2_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -void __init ns2_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - if (of_machine_is_compatible("lacie,cloudbox") || - of_machine_is_compatible("lacie,netspace_lite_v2") || - of_machine_is_compatible("lacie,netspace_mini_v2")) - ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); - kirkwood_ge00_init(&ns2_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c deleted file mode 100644 index b11d8fdeca93..000000000000 --- a/arch/arm/mach-kirkwood/board-openblocks_a6.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - * - * arch/arm/mach-kirkwood/board-openblocks_a6.c - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mv643xx_eth.h> -#include "common.h" - -static struct mv643xx_eth_platform_data openblocks_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -void __init openblocks_a6_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&openblocks_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-readynas.c b/arch/arm/mach-kirkwood/board-readynas.c deleted file mode 100644 index 341b82d9cadb..000000000000 --- a/arch/arm/mach-kirkwood/board-readynas.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * NETGEAR ReadyNAS Duo v2 Board setup for drivers not already - * converted to DT. - * - * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mv643xx_eth.h> -#include <mach/kirkwood.h> -#include "common.h" - -static struct mv643xx_eth_platform_data netgear_readynas_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -void __init netgear_readynas_init(void) -{ - kirkwood_ge00_init(&netgear_readynas_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-sheevaplug.c b/arch/arm/mach-kirkwood/board-sheevaplug.c deleted file mode 100644 index fa389373ca74..000000000000 --- a/arch/arm/mach-kirkwood/board-sheevaplug.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-kirkwood/board-sheevaplug.c - * - * Marvell Sheevaplug Reference Board Init for drivers not converted to - * flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mv643xx_eth.h> -#include "common.h" - -static struct mv643xx_eth_platform_data sheevaplug_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -void __init sheevaplug_dt_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&sheevaplug_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c deleted file mode 100644 index 860f44ab457d..000000000000 --- a/arch/arm/mach-kirkwood/board-ts219.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * - * QNAP TS-11x/TS-21x Turbo NAS Board Setup via DT - * - * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch> - * - * Based on the board file ts219-setup.c: - * - * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com> - * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mv643xx_eth.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include "common.h" - -static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -void __init qnap_dt_ts219_init(void) -{ - u32 dev, rev; - - kirkwood_pcie_id(&dev, &rev); - if (dev == MV88F6282_DEV_ID) - qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); - - kirkwood_ge00_init(&qnap_ts219_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c deleted file mode 100644 index 1cc04ec33f0b..000000000000 --- a/arch/arm/mach-kirkwood/board-usi_topkick.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> - * - * arch/arm/mach-kirkwood/board-usi_topkick.c - * - * USI Topkick Init for drivers not converted to flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mv643xx_eth.h> -#include <linux/gpio.h> -#include "common.h" - -static struct mv643xx_eth_platform_data topkick_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -void __init usi_topkick_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&topkick_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index fcf3ba682e24..1296de94febf 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -59,119 +59,10 @@ void kirkwood_restart(enum reboot_mode, const char *); void kirkwood_clk_init(void); /* board init functions for boards not fully converted to fdt */ -#ifdef CONFIG_MACH_DREAMPLUG_DT -void dreamplug_init(void); +#ifdef CONFIG_MACH_MV88F6281GTW_GE_DT +void mv88f6281gtw_ge_init(void); #else -static inline void dreamplug_init(void) {}; -#endif -#ifdef CONFIG_MACH_GURUPLUG_DT -void guruplug_dt_init(void); -#else -static inline void guruplug_dt_init(void) {}; -#endif -#ifdef CONFIG_MACH_SHEEVAPLUG_DT -void sheevaplug_dt_init(void); -#else -static inline void sheevaplug_dt_init(void) {}; -#endif -#ifdef CONFIG_MACH_TS219_DT -void qnap_dt_ts219_init(void); -#else -static inline void qnap_dt_ts219_init(void) {}; -#endif - -#ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT -void dnskw_init(void); -#else -static inline void dnskw_init(void) {}; -#endif - -#ifdef CONFIG_MACH_ICONNECT_DT -void iconnect_init(void); -#else -static inline void iconnect_init(void) {}; -#endif - -#ifdef CONFIG_MACH_IB62X0_DT -void ib62x0_init(void); -#else -static inline void ib62x0_init(void) {}; -#endif - -#ifdef CONFIG_MACH_DOCKSTAR_DT -void dockstar_dt_init(void); -#else -static inline void dockstar_dt_init(void) {}; -#endif - -#ifdef CONFIG_MACH_GOFLEXNET_DT -void goflexnet_init(void); -#else -static inline void goflexnet_init(void) {}; -#endif - -#ifdef CONFIG_MACH_LSXL_DT -void lsxl_init(void); -#else -static inline void lsxl_init(void) {}; -#endif - -#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT -void iomega_ix2_200_init(void); -#else -static inline void iomega_ix2_200_init(void) {}; -#endif - -#ifdef CONFIG_MACH_KM_KIRKWOOD_DT -void km_kirkwood_init(void); -#else -static inline void km_kirkwood_init(void) {}; -#endif - -#ifdef CONFIG_MACH_DB88F628X_BP_DT -void db88f628x_init(void); -#else -static inline void db88f628x_init(void) {}; -#endif - -#ifdef CONFIG_MACH_MPLCEC4_DT -void mplcec4_init(void); -#else -static inline void mplcec4_init(void) {}; -#endif - -#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \ - defined(CONFIG_MACH_NETSPACE_V2_DT) || \ - defined(CONFIG_MACH_NETSPACE_MAX_V2_DT) || \ - defined(CONFIG_MACH_NETSPACE_LITE_V2_DT) || \ - defined(CONFIG_MACH_NETSPACE_MINI_V2_DT) -void ns2_init(void); -#else -static inline void ns2_init(void) {}; -#endif - -#ifdef CONFIG_MACH_OPENBLOCKS_A6_DT -void openblocks_a6_init(void); -#else -static inline void openblocks_a6_init(void) {}; -#endif - -#ifdef CONFIG_MACH_READYNAS_DT -void netgear_readynas_init(void); -#else -static inline void netgear_readynas_init(void) {}; -#endif - -#ifdef CONFIG_MACH_TOPKICK_DT -void usi_topkick_init(void); -#else -static inline void usi_topkick_init(void) {}; -#endif - -#ifdef CONFIG_MACH_CLOUDBOX_DT -void cloudbox_init(void); -#else -static inline void cloudbox_init(void) {}; +static inline void mv88f6281gtw_ge_init(void) {}; #endif /* early init functions not converted to fdt yet */ diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c deleted file mode 100644 index 060ccf9cb63f..000000000000 --- a/arch/arm/mach-kirkwood/dockstar-setup.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * arch/arm/mach-kirkwood/dockstar-setup.c - * - * Seagate FreeAgent DockStar Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> -#include <linux/mtd/partitions.h> -#include <linux/mv643xx_eth.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include "common.h" -#include "mpp.h" - -static struct mtd_partition dockstar_nand_parts[] = { - { - .name = "u-boot", - .offset = 0, - .size = SZ_1M - }, { - .name = "uImage", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_4M - }, { - .name = "root", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL - }, -}; - -static struct mv643xx_eth_platform_data dockstar_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct gpio_led dockstar_led_pins[] = { - { - .name = "dockstar:green:health", - .default_trigger = "default-on", - .gpio = 46, - .active_low = 1, - }, - { - .name = "dockstar:orange:misc", - .default_trigger = "none", - .gpio = 47, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dockstar_led_data = { - .leds = dockstar_led_pins, - .num_leds = ARRAY_SIZE(dockstar_led_pins), -}; - -static struct platform_device dockstar_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dockstar_led_data, - } -}; - -static unsigned int dockstar_mpp_config[] __initdata = { - MPP29_GPIO, /* USB Power Enable */ - MPP46_GPIO, /* LED green */ - MPP47_GPIO, /* LED orange */ - 0 -}; - -static void __init dockstar_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - - /* setup gpio pin select */ - kirkwood_mpp_conf(dockstar_mpp_config); - - kirkwood_uart0_init(); - kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25); - - if (gpio_request(29, "USB Power Enable") != 0 || - gpio_direction_output(29, 1) != 0) - pr_err("can't set up GPIO 29 (USB Power Enable)\n"); - kirkwood_ehci_init(); - - kirkwood_ge00_init(&dockstar_ge00_data); - - platform_device_register(&dockstar_leds); -} - -MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar") - .atag_offset = 0x100, - .init_machine = dockstar_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c deleted file mode 100644 index 08dd739aa709..000000000000 --- a/arch/arm/mach-kirkwood/guruplug-setup.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * arch/arm/mach-kirkwood/guruplug-setup.c - * - * Marvell GuruPlug Reference Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/partitions.h> -#include <linux/ata_platform.h> -#include <linux/mv643xx_eth.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include <linux/platform_data/mmc-mvsdio.h> -#include "common.h" -#include "mpp.h" - -static struct mtd_partition guruplug_nand_parts[] = { - { - .name = "u-boot", - .offset = 0, - .size = SZ_1M - }, { - .name = "uImage", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_4M - }, { - .name = "root", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL - }, -}; - -static struct mv643xx_eth_platform_data guruplug_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct mv643xx_eth_platform_data guruplug_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(1), -}; - -static struct mv_sata_platform_data guruplug_sata_data = { - .n_ports = 1, -}; - -static struct mvsdio_platform_data guruplug_mvsdio_data = { - /* unfortunately the CD signal has not been connected */ - .gpio_card_detect = -1, - .gpio_write_protect = -1, -}; - -static struct gpio_led guruplug_led_pins[] = { - { - .name = "guruplug:red:health", - .gpio = 46, - .active_low = 1, - }, - { - .name = "guruplug:green:health", - .gpio = 47, - .active_low = 1, - }, - { - .name = "guruplug:red:wmode", - .gpio = 48, - .active_low = 1, - }, - { - .name = "guruplug:green:wmode", - .gpio = 49, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data guruplug_led_data = { - .leds = guruplug_led_pins, - .num_leds = ARRAY_SIZE(guruplug_led_pins), -}; - -static struct platform_device guruplug_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &guruplug_led_data, - } -}; - -static unsigned int guruplug_mpp_config[] __initdata = { - MPP46_GPIO, /* M_RLED */ - MPP47_GPIO, /* M_GLED */ - MPP48_GPIO, /* B_RLED */ - MPP49_GPIO, /* B_GLED */ - 0 -}; - -static void __init guruplug_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - kirkwood_mpp_conf(guruplug_mpp_config); - - kirkwood_uart0_init(); - kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25); - - kirkwood_ehci_init(); - kirkwood_ge00_init(&guruplug_ge00_data); - kirkwood_ge01_init(&guruplug_ge01_data); - kirkwood_sata_init(&guruplug_sata_data); - kirkwood_sdio_init(&guruplug_mvsdio_data); - - platform_device_register(&guruplug_leds); -} - -MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board") - /* Maintainer: Siddarth Gore <gores@marvell.com> */ - .atag_offset = 0x100, - .init_machine = guruplug_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c deleted file mode 100644 index ba384b992bef..000000000000 --- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c - * - * Marvell 88F6281 GTW GE Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/timer.h> -#include <linux/mv643xx_eth.h> -#include <linux/ethtool.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <net/dsa.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <mach/kirkwood.h> -#include "common.h" -#include "mpp.h" - -static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_NONE, - .speed = SPEED_1000, - .duplex = DUPLEX_FULL, -}; - -static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = { - .port_names[0] = "lan1", - .port_names[1] = "lan2", - .port_names[2] = "lan3", - .port_names[3] = "lan4", - .port_names[4] = "wan", - .port_names[5] = "cpu", -}; - -static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = { - .nr_chips = 1, - .chip = &mv88f6281gtw_ge_switch_chip_data, -}; - -static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = { - .type = "mx25l12805d", -}; - -static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &mv88f6281gtw_ge_spi_slave_data, - .irq = -1, - .max_speed_hz = 50000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = { - { - .code = KEY_RESTART, - .gpio = 47, - .desc = "SWR Button", - .active_low = 1, - }, { - .code = KEY_WPS_BUTTON, - .gpio = 46, - .desc = "WPS Button", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = { - .buttons = mv88f6281gtw_ge_button_pins, - .nbuttons = ARRAY_SIZE(mv88f6281gtw_ge_button_pins), -}; - -static struct platform_device mv88f6281gtw_ge_buttons = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &mv88f6281gtw_ge_button_data, - }, -}; - -static struct gpio_led mv88f6281gtw_ge_led_pins[] = { - { - .name = "gtw:green:Status", - .gpio = 20, - .active_low = 0, - }, { - .name = "gtw:red:Status", - .gpio = 21, - .active_low = 0, - }, { - .name = "gtw:green:USB", - .gpio = 12, - .active_low = 0, - }, -}; - -static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = { - .leds = mv88f6281gtw_ge_led_pins, - .num_leds = ARRAY_SIZE(mv88f6281gtw_ge_led_pins), -}; - -static struct platform_device mv88f6281gtw_ge_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &mv88f6281gtw_ge_led_data, - }, -}; - -static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = { - MPP12_GPO, /* Status#_USB pin */ - MPP20_GPIO, /* Status#_GLED pin */ - MPP21_GPIO, /* Status#_RLED pin */ - MPP46_GPIO, /* WPS_Switch pin */ - MPP47_GPIO, /* SW_Init pin */ - 0 -}; - -static void __init mv88f6281gtw_ge_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config); - - kirkwood_ehci_init(); - kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data); - kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ); - spi_register_board_info(mv88f6281gtw_ge_spi_slave_info, - ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info)); - kirkwood_spi_init(); - kirkwood_uart0_init(); - platform_device_register(&mv88f6281gtw_ge_leds); - platform_device_register(&mv88f6281gtw_ge_buttons); -} - -static int __init mv88f6281gtw_ge_pci_init(void) -{ - if (machine_is_mv88f6281gtw_ge()) - kirkwood_pcie_init(KW_PCIE0); - - return 0; -} -subsys_initcall(mv88f6281gtw_ge_pci_init); - -MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board") - /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .atag_offset = 0x100, - .init_machine = mv88f6281gtw_ge_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c deleted file mode 100644 index 3b706611da8e..000000000000 --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c +++ /dev/null @@ -1,293 +0,0 @@ -/* - * arch/arm/mach-kirkwood/netspace_v2-setup.c - * - * LaCie Network Space v2 board setup - * - * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> - * Copyright (C) 2009 Benoît Canet <benoit.canet@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> -#include <linux/mv643xx_eth.h> -#include <linux/input.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/leds.h> -#include <linux/gpio-fan.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include <linux/platform_data/leds-kirkwood-ns2.h> -#include "common.h" -#include "mpp.h" -#include "lacie_v2-common.h" - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data netspace_v2_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ - -static struct mv_sata_platform_data netspace_v2_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * GPIO keys - ****************************************************************************/ - -#define NETSPACE_V2_PUSH_BUTTON 32 - -static struct gpio_keys_button netspace_v2_buttons[] = { - [0] = { - .code = KEY_POWER, - .gpio = NETSPACE_V2_PUSH_BUTTON, - .desc = "Power push button", - .active_low = 0, - }, -}; - -static struct gpio_keys_platform_data netspace_v2_button_data = { - .buttons = netspace_v2_buttons, - .nbuttons = ARRAY_SIZE(netspace_v2_buttons), -}; - -static struct platform_device netspace_v2_gpio_buttons = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &netspace_v2_button_data, - }, -}; - -/***************************************************************************** - * GPIO LEDs - ****************************************************************************/ - -#define NETSPACE_V2_GPIO_RED_LED 12 - -static struct gpio_led netspace_v2_gpio_led_pins[] = { - { - .name = "ns_v2:red:fail", - .gpio = NETSPACE_V2_GPIO_RED_LED, - }, -}; - -static struct gpio_led_platform_data netspace_v2_gpio_leds_data = { - .num_leds = ARRAY_SIZE(netspace_v2_gpio_led_pins), - .leds = netspace_v2_gpio_led_pins, -}; - -static struct platform_device netspace_v2_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &netspace_v2_gpio_leds_data, - }, -}; - -/***************************************************************************** - * Dual-GPIO CPLD LEDs - ****************************************************************************/ - -#define NETSPACE_V2_GPIO_BLUE_LED_SLOW 29 -#define NETSPACE_V2_GPIO_BLUE_LED_CMD 30 - -static struct ns2_led netspace_v2_led_pins[] = { - { - .name = "ns_v2:blue:sata", - .cmd = NETSPACE_V2_GPIO_BLUE_LED_CMD, - .slow = NETSPACE_V2_GPIO_BLUE_LED_SLOW, - }, -}; - -static struct ns2_led_platform_data netspace_v2_leds_data = { - .num_leds = ARRAY_SIZE(netspace_v2_led_pins), - .leds = netspace_v2_led_pins, -}; - -static struct platform_device netspace_v2_leds = { - .name = "leds-ns2", - .id = -1, - .dev = { - .platform_data = &netspace_v2_leds_data, - }, -}; - -/***************************************************************************** - * GPIO fan - ****************************************************************************/ - -/* Designed for fan 40x40x16: ADDA AD0412LB-D50 6000rpm@12v */ -static struct gpio_fan_speed netspace_max_v2_fan_speed[] = { - { 0, 0 }, - { 1500, 15 }, - { 1700, 14 }, - { 1800, 13 }, - { 2100, 12 }, - { 3100, 11 }, - { 3300, 10 }, - { 4300, 9 }, - { 5500, 8 }, -}; - -static unsigned netspace_max_v2_fan_ctrl[] = { 22, 7, 33, 23 }; - -static struct gpio_fan_alarm netspace_max_v2_fan_alarm = { - .gpio = 25, - .active_low = 1, -}; - -static struct gpio_fan_platform_data netspace_max_v2_fan_data = { - .num_ctrl = ARRAY_SIZE(netspace_max_v2_fan_ctrl), - .ctrl = netspace_max_v2_fan_ctrl, - .alarm = &netspace_max_v2_fan_alarm, - .num_speed = ARRAY_SIZE(netspace_max_v2_fan_speed), - .speed = netspace_max_v2_fan_speed, -}; - -static struct platform_device netspace_max_v2_gpio_fan = { - .name = "gpio-fan", - .id = -1, - .dev = { - .platform_data = &netspace_max_v2_fan_data, - }, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -static unsigned int netspace_v2_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, /* Fan speed (bit 1) */ - MPP8_TW0_SDA, - MPP9_TW0_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_GPO, /* Red led */ - MPP14_GPIO, /* USB fuse */ - MPP16_GPIO, /* SATA 0 power */ - MPP17_GPIO, /* SATA 1 power */ - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, - MPP22_GPIO, /* Fan speed (bit 0) */ - MPP23_GPIO, /* Fan power */ - MPP24_GPIO, /* USB mode select */ - MPP25_GPIO, /* Fan rotation fail */ - MPP26_GPIO, /* USB device vbus */ - MPP28_GPIO, /* USB enable host vbus */ - MPP29_GPIO, /* Blue led (slow register) */ - MPP30_GPIO, /* Blue led (command register) */ - MPP31_GPIO, /* Board power off */ - MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ - MPP33_GPO, /* Fan speed (bit 2) */ - 0 -}; - -#define NETSPACE_V2_GPIO_POWER_OFF 31 - -static void netspace_v2_power_off(void) -{ - gpio_set_value(NETSPACE_V2_GPIO_POWER_OFF, 1); -} - -static void __init netspace_v2_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - kirkwood_mpp_conf(netspace_v2_mpp_config); - - if (machine_is_netspace_max_v2()) - lacie_v2_hdd_power_init(2); - else - lacie_v2_hdd_power_init(1); - - kirkwood_ehci_init(); - kirkwood_ge00_init(&netspace_v2_ge00_data); - kirkwood_sata_init(&netspace_v2_sata_data); - kirkwood_uart0_init(); - lacie_v2_register_flash(); - lacie_v2_register_i2c_devices(); - - platform_device_register(&netspace_v2_leds); - platform_device_register(&netspace_v2_gpio_leds); - platform_device_register(&netspace_v2_gpio_buttons); - if (machine_is_netspace_max_v2()) - platform_device_register(&netspace_max_v2_gpio_fan); - - if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 && - gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0) - pm_power_off = netspace_v2_power_off; - else - pr_err("netspace_v2: failed to configure power-off GPIO\n"); -} - -#ifdef CONFIG_MACH_NETSPACE_V2 -MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") - .atag_offset = 0x100, - .init_machine = netspace_v2_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_INETSPACE_V2 -MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2") - .atag_offset = 0x100, - .init_machine = netspace_v2_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_NETSPACE_MAX_V2 -MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2") - .atag_offset = 0x100, - .init_machine = netspace_v2_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index 6a6eb548307d..e5cf84103583 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -158,7 +158,8 @@ static void __init openrd_init(void) kirkwood_mpp_conf(openrd_mpp_config); kirkwood_uart0_init(); - kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25); + kirkwood_nand_init(openrd_nand_parts, ARRAY_SIZE(openrd_nand_parts), + 25); kirkwood_ehci_init(); diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index d24223166e06..5154bd2a3ad3 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -87,7 +87,9 @@ static void __init rd88f6281_init(void) kirkwood_init(); kirkwood_mpp_conf(rd88f6281_mpp_config); - kirkwood_nand_init(ARRAY_AND_SIZE(rd88f6281_nand_parts), 25); + kirkwood_nand_init(rd88f6281_nand_parts, + ARRAY_SIZE(rd88f6281_nand_parts), + 25); kirkwood_ehci_init(); kirkwood_ge00_init(&rd88f6281_ge00_data); diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c deleted file mode 100644 index 55b68fa39f45..000000000000 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * arch/arm/mach-kirkwood/sheevaplug-setup.c - * - * Marvell SheevaPlug Reference Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> -#include <linux/mtd/partitions.h> -#include <linux/mv643xx_eth.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include <linux/platform_data/mmc-mvsdio.h> -#include "common.h" -#include "mpp.h" - -static struct mtd_partition sheevaplug_nand_parts[] = { - { - .name = "u-boot", - .offset = 0, - .size = SZ_1M - }, { - .name = "uImage", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_4M - }, { - .name = "root", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL - }, -}; - -static struct mv643xx_eth_platform_data sheevaplug_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct mv_sata_platform_data sheeva_esata_sata_data = { - .n_ports = 2, -}; - -static struct mvsdio_platform_data sheevaplug_mvsdio_data = { - /* unfortunately the CD signal has not been connected */ -}; - -static struct mvsdio_platform_data sheeva_esata_mvsdio_data = { - .gpio_write_protect = 44, /* MPP44 used as SD write protect */ - .gpio_card_detect = 47, /* MPP47 used as SD card detect */ -}; - -static struct gpio_led sheevaplug_led_pins[] = { - { - .name = "plug:red:misc", - .default_trigger = "none", - .gpio = 46, - .active_low = 1, - }, - { - .name = "plug:green:health", - .default_trigger = "default-on", - .gpio = 49, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data sheevaplug_led_data = { - .leds = sheevaplug_led_pins, - .num_leds = ARRAY_SIZE(sheevaplug_led_pins), -}; - -static struct platform_device sheevaplug_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &sheevaplug_led_data, - } -}; - -static unsigned int sheevaplug_mpp_config[] __initdata = { - MPP29_GPIO, /* USB Power Enable */ - MPP46_GPIO, /* LED Red */ - MPP49_GPIO, /* LED */ - 0 -}; - -static unsigned int sheeva_esata_mpp_config[] __initdata = { - MPP29_GPIO, /* USB Power Enable */ - MPP44_GPIO, /* SD Write Protect */ - MPP47_GPIO, /* SD Card Detect */ - MPP49_GPIO, /* LED Green */ - 0 -}; - -static void __init sheevaplug_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - - /* setup gpio pin select */ - if (machine_is_esata_sheevaplug()) - kirkwood_mpp_conf(sheeva_esata_mpp_config); - else - kirkwood_mpp_conf(sheevaplug_mpp_config); - - kirkwood_uart0_init(); - kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25); - - if (gpio_request(29, "USB Power Enable") != 0 || - gpio_direction_output(29, 1) != 0) - pr_err("can't set up GPIO 29 (USB Power Enable)\n"); - kirkwood_ehci_init(); - - kirkwood_ge00_init(&sheevaplug_ge00_data); - - /* honor lower power consumption for plugs with out eSATA */ - if (machine_is_esata_sheevaplug()) - kirkwood_sata_init(&sheeva_esata_sata_data); - - /* enable sd wp and sd cd on plugs with esata */ - if (machine_is_esata_sheevaplug()) - kirkwood_sdio_init(&sheeva_esata_mvsdio_data); - else - kirkwood_sdio_init(&sheevaplug_mvsdio_data); - - platform_device_register(&sheevaplug_leds); -} - -#ifdef CONFIG_MACH_SHEEVAPLUG -MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board") - /* Maintainer: shadi Ammouri <shadi@marvell.com> */ - .atag_offset = 0x100, - .init_machine = sheevaplug_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG -MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board") - .atag_offset = 0x100, - .init_machine = sheevaplug_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c index 147615510dd0..7d316ede10ae 100644 --- a/arch/arm/mach-orion5x/edmini_v2-setup.c +++ b/arch/arm/mach-orion5x/edmini_v2-setup.c @@ -23,8 +23,8 @@ #include <linux/platform_device.h> #include <linux/pci.h> #include <linux/irq.h> +#include <linux/mbus.h> #include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> #include <linux/leds.h> #include <linux/gpio_keys.h> #include <linux/input.h> @@ -96,14 +96,6 @@ static struct platform_device edmini_v2_nor_flash = { }; /***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data edmini_v2_eth_data = { - .phy_addr = 8, -}; - -/***************************************************************************** * RTC 5C372a on I2C bus ****************************************************************************/ @@ -152,7 +144,6 @@ void __init edmini_v2_init(void) * Configure peripherals. */ orion5x_ehci0_init(); - orion5x_eth_init(&edmini_v2_eth_data); mvebu_mbus_add_window("devbus-boot", EDMINI_V2_NOR_BOOT_BASE, EDMINI_V2_NOR_BOOT_SIZE); diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 3912ce91fee4..f76fca6d9375 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -23,9 +23,10 @@ config ARCH_R8A73A4 select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC select CPU_V7 - select HAVE_ARM_ARCH_TIMER select SH_CLK_CPG select RENESAS_IRQC + select ARCH_HAS_CPUFREQ + select ARCH_HAS_OPP config ARCH_R8A7740 bool "R-Mobile A1 (R8A77400)" @@ -59,7 +60,6 @@ config ARCH_R8A7790 select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC select CPU_V7 - select HAVE_ARM_ARCH_TIMER select SH_CLK_CPG select RENESAS_IRQC @@ -124,6 +124,7 @@ config MACH_BOCKW depends on ARCH_R8A7778 select ARCH_REQUIRE_GPIOLIB select RENESAS_INTC_IRQPIN + select REGULATOR_FIXED_VOLTAGE if REGULATOR select USE_OF config MACH_MARZEN @@ -156,6 +157,18 @@ config MACH_KZM9D select REGULATOR_FIXED_VOLTAGE if REGULATOR select USE_OF +config MACH_KZM9D_REFERENCE + bool "KZM9D board - Reference Device Tree Implementation" + depends on ARCH_EMEV2 + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select USE_OF + ---help--- + Use reference implementation of KZM9D board support + which makes a greater use of device tree at the expense + of not supporting a number of devices. + + This is intended to aid developers + config MACH_KZM9G bool "KZM-A9-GT board" depends on ARCH_SH73A0 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 6165a517f580..e8d0a2c904a0 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_MACH_LAGER) += board-lager.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o +obj-$(CONFIG_MACH_KZM9D_REFERENCE) += board-kzm9d-reference.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index 84c6868580f0..7785c52b5cfd 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -7,6 +7,7 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000 loadaddr-$(CONFIG_MACH_KOTA2) += 0x41008000 loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000 +loadaddr-$(CONFIG_MACH_KZM9D_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000 loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000 diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index c7540710906f..f6d64495c405 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -41,6 +41,7 @@ #include <linux/mmc/sh_mmcif.h> #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> +#include <linux/platform_data/bd6107.h> #include <linux/sh_clk.h> #include <linux/irqchip/arm-gic.h> #include <video/sh_mobile_lcdc.h> @@ -291,47 +292,7 @@ static struct platform_device mipidsi0_device = { }, }; -static unsigned char lcd_backlight_seq[3][2] = { - { 0x04, 0x07 }, - { 0x23, 0x80 }, - { 0x03, 0x01 }, -}; - -static int lcd_backlight_set_brightness(int brightness) -{ - struct i2c_adapter *adap; - struct i2c_msg msg; - unsigned int i; - int ret; - - if (brightness == 0) { - /* Reset the chip */ - gpio_set_value(235, 0); - mdelay(24); - gpio_set_value(235, 1); - return 0; - } - - adap = i2c_get_adapter(1); - if (adap == NULL) - return -ENODEV; - - for (i = 0; i < ARRAY_SIZE(lcd_backlight_seq); i++) { - msg.addr = 0x6d; - msg.buf = &lcd_backlight_seq[i][0]; - msg.len = 2; - msg.flags = 0; - - ret = i2c_transfer(adap, &msg, 1); - if (ret < 0) - break; - } - - i2c_put_adapter(adap); - return ret < 0 ? ret : 0; -} - -/* LCDC0 */ +/* LCDC0 and backlight */ static const struct fb_videomode lcdc0_modes[] = { { .name = "R63302(QHD)", @@ -361,11 +322,6 @@ static struct sh_mobile_lcdc_info lcdc0_info = { .width = 44, .height = 79, }, - .bl_info = { - .name = "sh_mobile_lcdc_bl", - .max_brightness = 1, - .set_brightness = lcd_backlight_set_brightness, - }, .tx_dev = &mipidsi0_device, } }; @@ -394,6 +350,17 @@ static struct platform_device lcdc0_device = { }, }; +static struct bd6107_platform_data backlight_data = { + .fbdev = &lcdc0_device.dev, + .reset = 235, + .def_value = 0, +}; + +static struct i2c_board_info backlight_board_info = { + I2C_BOARD_INFO("bd6107", 0x6d), + .platform_data = &backlight_data, +}; + /* Fixed 2.8V regulators to be used by SDHI0 */ static struct regulator_consumer_supply fixed2v8_power_consumers[] = { @@ -648,15 +615,15 @@ static void __init ag5evm_init(void) gpio_set_value(217, 1); mdelay(100); - /* LCD backlight controller */ - gpio_request_one(235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */ - lcd_backlight_set_brightness(0); #ifdef CONFIG_CACHE_L2X0 /* Shared attribute override enable, 64K*8way */ l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff); #endif sh73a0_add_standard_devices(); + + i2c_register_board_info(1, &backlight_board_info, 1); + platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices)); } diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c index 5eb0caa6a7d0..38c6c733fabf 100644 --- a/arch/arm/mach-shmobile/board-ape6evm.c +++ b/arch/arm/mach-shmobile/board-ape6evm.c @@ -19,9 +19,14 @@ */ #include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> #include <linux/interrupt.h> -#include <linux/irqchip.h> #include <linux/kernel.h> +#include <linux/mfd/tmio.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sh_mmcif.h> +#include <linux/mmc/sh_mobile_sdhi.h> #include <linux/pinctrl/machine.h> #include <linux/platform_device.h> #include <linux/regulator/fixed.h> @@ -34,6 +39,58 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +/* LEDS */ +static struct gpio_led ape6evm_leds[] = { + { + .name = "gnss-en", + .gpio = 28, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, { + .name = "nfc-nrst", + .gpio = 126, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, { + .name = "gnss-nrst", + .gpio = 132, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, { + .name = "bt-wakeup", + .gpio = 232, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, { + .name = "strobe", + .gpio = 250, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, { + .name = "bbresetout", + .gpio = 288, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, +}; + +static __initdata struct gpio_led_platform_data ape6evm_leds_pdata = { + .leds = ape6evm_leds, + .num_leds = ARRAY_SIZE(ape6evm_leds), +}; + +/* GPIO KEY */ +#define GPIO_KEY(c, g, d, ...) \ + { .code = c, .gpio = g, .desc = d, .active_low = 1 } + +static struct gpio_keys_button gpio_buttons[] = { + GPIO_KEY(KEY_0, 324, "S16"), + GPIO_KEY(KEY_MENU, 325, "S17"), + GPIO_KEY(KEY_HOME, 326, "S18"), + GPIO_KEY(KEY_BACK, 327, "S19"), + GPIO_KEY(KEY_VOLUMEUP, 328, "S20"), + GPIO_KEY(KEY_VOLUMEDOWN, 329, "S21"), +}; + +static struct __initdata gpio_keys_platform_data ape6evm_keys_pdata = { + .buttons = gpio_buttons, + .nbuttons = ARRAY_SIZE(gpio_buttons), +}; + /* Dummy supplies, where voltage doesn't matter */ static struct regulator_consumer_supply dummy_supplies[] = { REGULATOR_SUPPLY("vddvario", "smsc911x"), @@ -41,7 +98,7 @@ static struct regulator_consumer_supply dummy_supplies[] = { }; /* SMSC LAN9220 */ -static const struct resource lan9220_res[] = { +static const struct resource lan9220_res[] __initconst = { DEFINE_RES_MEM(0x08000000, 0x1000), { .start = irq_pin(40), /* IRQ40 */ @@ -49,19 +106,83 @@ static const struct resource lan9220_res[] = { }, }; -static const struct smsc911x_platform_config lan9220_data = { +static const struct smsc911x_platform_config lan9220_data __initconst = { .flags = SMSC911X_USE_32BIT, .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, }; -static const struct pinctrl_map ape6evm_pinctrl_map[] = { +/* + * On APE6EVM power is supplied to MMCIF by a tps80032 regulator. For now we + * model a VDD supply to MMCIF, using a fixed 3.3V regulator. Also use the + * static power supply for SDHI0 and SDHI1, whereas SDHI0's VccQ is also + * supplied by the same tps80032 regulator and thus can also be adjusted + * dynamically. + */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), +}; + +/* MMCIF */ +static const struct sh_mmcif_plat_data mmcif0_pdata __initconst = { + .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, +}; + +static const struct resource mmcif0_resources[] __initconst = { + DEFINE_RES_MEM_NAMED(0xee200000, 0x100, "MMCIF0"), + DEFINE_RES_IRQ(gic_spi(169)), +}; + +/* SDHI0 */ +static const struct sh_mobile_sdhi_info sdhi0_pdata __initconst = { + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE, + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, +}; + +static const struct resource sdhi0_resources[] __initconst = { + DEFINE_RES_MEM_NAMED(0xee100000, 0x100, "SDHI0"), + DEFINE_RES_IRQ(gic_spi(165)), +}; + +/* SDHI1 */ +static const struct sh_mobile_sdhi_info sdhi1_pdata __initconst = { + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE, + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | + MMC_CAP_NEEDS_POLL, +}; + +static const struct resource sdhi1_resources[] __initconst = { + DEFINE_RES_MEM_NAMED(0xee120000, 0x100, "SDHI1"), + DEFINE_RES_IRQ(gic_spi(166)), +}; + +static const struct pinctrl_map ape6evm_pinctrl_map[] __initconst = { /* SCIFA0 console */ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a73a4", "scifa0_data", "scifa0"), /* SMSC */ PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a73a4", "irqc_irq40", "irqc"), + /* MMCIF0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a73a4", + "mmc0_data8", "mmc0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a73a4", + "mmc0_ctrl", "mmc0"), + /* SDHI0: uSD: no WP */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4", + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4", + "sdhi0_cd", "sdhi0"), + /* SDHI1 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a73a4", + "sdhi1_data4", "sdhi1"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a73a4", + "sdhi1_ctrl", "sdhi1"), }; static void __init ape6evm_add_standard_devices(void) @@ -94,6 +215,23 @@ static void __init ape6evm_add_standard_devices(void) platform_device_register_resndata(&platform_bus, "smsc911x", -1, lan9220_res, ARRAY_SIZE(lan9220_res), &lan9220_data, sizeof(lan9220_data)); + regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + platform_device_register_resndata(&platform_bus, "sh_mmcif", 0, + mmcif0_resources, ARRAY_SIZE(mmcif0_resources), + &mmcif0_pdata, sizeof(mmcif0_pdata)); + platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0, + sdhi0_resources, ARRAY_SIZE(sdhi0_resources), + &sdhi0_pdata, sizeof(sdhi0_pdata)); + platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 1, + sdhi1_resources, ARRAY_SIZE(sdhi1_resources), + &sdhi1_pdata, sizeof(sdhi1_pdata)); + platform_device_register_data(&platform_bus, "gpio-keys", -1, + &ape6evm_keys_pdata, + sizeof(ape6evm_keys_pdata)); + platform_device_register_data(&platform_bus, "leds-gpio", -1, + &ape6evm_leds_pdata, + sizeof(ape6evm_leds_pdata)); } static const char *ape6evm_boards_compat_dt[] __initdata = { @@ -102,7 +240,7 @@ static const char *ape6evm_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(APE6EVM_DT, "ape6evm") - .init_irq = irqchip_init, + .init_early = r8a73a4_init_delay, .init_time = shmobile_timer_init, .init_machine = ape6evm_add_standard_devices, .dt_compat = ape6evm_boards_compat_dt, diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index e115f6742107..2412fcae2c0d 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -31,6 +31,8 @@ #include <linux/gpio_keys.h> #include <linux/regulator/driver.h> #include <linux/pinctrl/machine.h> +#include <linux/platform_data/pwm-renesas-tpu.h> +#include <linux/pwm_backlight.h> #include <linux/regulator/fixed.h> #include <linux/regulator/gpio-regulator.h> #include <linux/regulator/machine.h> @@ -387,7 +389,50 @@ static struct platform_device sh_eth_device = { .num_resources = ARRAY_SIZE(sh_eth_resources), }; -/* LCDC */ +/* PWM */ +static struct resource pwm_resources[] = { + [0] = { + .start = 0xe6600000, + .end = 0xe66000ff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct tpu_pwm_platform_data pwm_device_data = { + .channels[2] = { + .polarity = PWM_POLARITY_INVERSED, + } +}; + +static struct platform_device pwm_device = { + .name = "renesas-tpu-pwm", + .id = -1, + .dev = { + .platform_data = &pwm_device_data, + }, + .num_resources = ARRAY_SIZE(pwm_resources), + .resource = pwm_resources, +}; + +static struct pwm_lookup pwm_lookup[] = { + PWM_LOOKUP("renesas-tpu-pwm", 2, "pwm-backlight.0", NULL), +}; + +/* LCDC and backlight */ +static struct platform_pwm_backlight_data pwm_backlight_data = { + .lth_brightness = 50, + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 33333, /* 30kHz */ +}; + +static struct platform_device pwm_backlight_device = { + .name = "pwm-backlight", + .dev = { + .platform_data = &pwm_backlight_data, + }, +}; + static struct fb_videomode lcdc0_mode = { .name = "AMPIER/AM-800480", .xres = 800, @@ -679,15 +724,6 @@ static struct platform_device vcc_sdhi1 = { }; /* SDHI0 */ -/* - * FIXME - * - * It use polling mode here, since - * CD (= Card Detect) pin is not connected to SDHI0_CD. - * We can use IRQ31 as card detect irq, - * but it needs chattering removal operation - */ -#define IRQ31 irq_pin(31) static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, @@ -788,6 +824,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct resource sh_mmcif_resources[] = { @@ -1030,6 +1068,8 @@ static struct i2c_board_info i2c2_devices[] = { */ static struct platform_device *eva_devices[] __initdata = { &lcdc0_device, + &pwm_device, + &pwm_backlight_device, &gpio_keys_device, &sh_eth_device, &vcc_sdhi0, @@ -1101,6 +1141,9 @@ static const struct pinctrl_map eva_pinctrl_map[] = { /* ST1232 */ PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-r8a7740", "intc_irq10", "intc"), + /* TPU0 */ + PIN_MAP_MUX_GROUP_DEFAULT("renesas-tpu-pwm", "pfc-r8a7740", + "tpu0_to2_1", "tpu0"), /* USBHS */ PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7740", "intc_irq7_1", "intc"), @@ -1154,13 +1197,13 @@ static void __init eva_init(void) ARRAY_SIZE(fixed3v3_power_consumers), 3300000); pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map)); + pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup)); r8a7740_pinmux_init(); r8a7740_meram_workaround(); /* LCDC0 */ gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ - gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */ /* Touchscreen */ gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index ef5ca0ef0cb5..6af20d909bdb 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -26,6 +26,7 @@ #include <linux/irq.h> #include <linux/pinctrl/machine.h> #include <linux/pinctrl/pinconf-generic.h> +#include <linux/platform_data/pwm-renesas-tpu.h> #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/io.h> @@ -37,8 +38,8 @@ #include <linux/input/sh_keysc.h> #include <linux/gpio_keys.h> #include <linux/leds.h> +#include <linux/leds_pwm.h> #include <linux/irqchip/arm-gic.h> -#include <linux/platform_data/leds-renesas-tpu.h> #include <linux/mmc/host.h> #include <linux/mmc/sh_mmcif.h> #include <linux/mfd/tmio.h> @@ -186,116 +187,100 @@ static struct platform_device gpio_leds_device = { }; /* TPU LED */ -static struct led_renesas_tpu_config led_renesas_tpu12_pdata = { - .name = "V2513", - .pin_gpio_fn = GPIO_FN_TPU1TO2, - .pin_gpio = 153, - .channel_offset = 0x90, - .timer_bit = 2, - .max_brightness = 1000, -}; - -static struct resource tpu12_resources[] = { +static struct resource tpu1_pwm_resources[] = { [0] = { - .name = "TPU12", - .start = 0xe6610090, - .end = 0xe66100b5, + .start = 0xe6610000, + .end = 0xe66100ff, .flags = IORESOURCE_MEM, }, }; -static struct platform_device leds_tpu12_device = { - .name = "leds-renesas-tpu", - .id = 12, - .dev = { - .platform_data = &led_renesas_tpu12_pdata, - }, - .num_resources = ARRAY_SIZE(tpu12_resources), - .resource = tpu12_resources, +static struct platform_device tpu1_pwm_device = { + .name = "renesas-tpu-pwm", + .id = 1, + .num_resources = ARRAY_SIZE(tpu1_pwm_resources), + .resource = tpu1_pwm_resources, }; -static struct led_renesas_tpu_config led_renesas_tpu41_pdata = { - .name = "V2514", - .pin_gpio_fn = GPIO_FN_TPU4TO1, - .pin_gpio = 199, - .channel_offset = 0x50, - .timer_bit = 1, - .max_brightness = 1000, -}; - -static struct resource tpu41_resources[] = { +static struct resource tpu2_pwm_resources[] = { [0] = { - .name = "TPU41", - .start = 0xe6640050, - .end = 0xe6640075, + .start = 0xe6620000, + .end = 0xe66200ff, .flags = IORESOURCE_MEM, }, }; -static struct platform_device leds_tpu41_device = { - .name = "leds-renesas-tpu", - .id = 41, - .dev = { - .platform_data = &led_renesas_tpu41_pdata, +static struct platform_device tpu2_pwm_device = { + .name = "renesas-tpu-pwm", + .id = 2, + .num_resources = ARRAY_SIZE(tpu2_pwm_resources), + .resource = tpu2_pwm_resources, +}; + +static struct resource tpu3_pwm_resources[] = { + [0] = { + .start = 0xe6630000, + .end = 0xe66300ff, + .flags = IORESOURCE_MEM, }, - .num_resources = ARRAY_SIZE(tpu41_resources), - .resource = tpu41_resources, }; -static struct led_renesas_tpu_config led_renesas_tpu21_pdata = { - .name = "V2515", - .pin_gpio_fn = GPIO_FN_TPU2TO1, - .pin_gpio = 197, - .channel_offset = 0x50, - .timer_bit = 1, - .max_brightness = 1000, +static struct platform_device tpu3_pwm_device = { + .name = "renesas-tpu-pwm", + .id = 3, + .num_resources = ARRAY_SIZE(tpu3_pwm_resources), + .resource = tpu3_pwm_resources, }; -static struct resource tpu21_resources[] = { +static struct resource tpu4_pwm_resources[] = { [0] = { - .name = "TPU21", - .start = 0xe6620050, - .end = 0xe6620075, + .start = 0xe6640000, + .end = 0xe66400ff, .flags = IORESOURCE_MEM, }, }; -static struct platform_device leds_tpu21_device = { - .name = "leds-renesas-tpu", - .id = 21, - .dev = { - .platform_data = &led_renesas_tpu21_pdata, +static struct platform_device tpu4_pwm_device = { + .name = "renesas-tpu-pwm", + .id = 4, + .num_resources = ARRAY_SIZE(tpu4_pwm_resources), + .resource = tpu4_pwm_resources, +}; + +static struct pwm_lookup pwm_lookup[] = { + PWM_LOOKUP("renesas-tpu-pwm.1", 2, "leds-pwm.0", "V2513"), + PWM_LOOKUP("renesas-tpu-pwm.2", 1, "leds-pwm.0", "V2515"), + PWM_LOOKUP("renesas-tpu-pwm.3", 0, "leds-pwm.0", "KEYLED"), + PWM_LOOKUP("renesas-tpu-pwm.4", 1, "leds-pwm.0", "V2514"), +}; + +static struct led_pwm tpu_pwm_leds[] = { + { + .name = "V2513", + .max_brightness = 1000, + }, { + .name = "V2515", + .max_brightness = 1000, + }, { + .name = "KEYLED", + .max_brightness = 1000, + }, { + .name = "V2514", + .max_brightness = 1000, }, - .num_resources = ARRAY_SIZE(tpu21_resources), - .resource = tpu21_resources, }; -static struct led_renesas_tpu_config led_renesas_tpu30_pdata = { - .name = "KEYLED", - .pin_gpio_fn = GPIO_FN_TPU3TO0, - .pin_gpio = 163, - .channel_offset = 0x10, - .timer_bit = 0, - .max_brightness = 1000, +static struct led_pwm_platform_data leds_pwm_pdata = { + .num_leds = ARRAY_SIZE(tpu_pwm_leds), + .leds = tpu_pwm_leds, }; -static struct resource tpu30_resources[] = { - [0] = { - .name = "TPU30", - .start = 0xe6630010, - .end = 0xe6630035, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device leds_tpu30_device = { - .name = "leds-renesas-tpu", - .id = 30, +static struct platform_device leds_pwm_device = { + .name = "leds-pwm", + .id = 0, .dev = { - .platform_data = &led_renesas_tpu30_pdata, + .platform_data = &leds_pwm_pdata, }, - .num_resources = ARRAY_SIZE(tpu30_resources), - .resource = tpu30_resources, }; /* Fixed 1.8V regulator to be used by MMCIF */ @@ -426,10 +411,11 @@ static struct platform_device *kota2_devices[] __initdata = { &keysc_device, &gpio_keys_device, &gpio_leds_device, - &leds_tpu12_device, - &leds_tpu41_device, - &leds_tpu21_device, - &leds_tpu30_device, + &tpu1_pwm_device, + &tpu2_pwm_device, + &tpu3_pwm_device, + &tpu4_pwm_device, + &leds_pwm_device, &mmcif_device, &sdhi0_device, &sdhi1_device, @@ -512,6 +498,15 @@ static const struct pinctrl_map kota2_pinctrl_map[] = { "bsc_cs5_a", "bsc"), PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0", "bsc_we0", "bsc"), + /* TPU */ + PIN_MAP_MUX_GROUP_DEFAULT("renesas-tpu-pwm.1", "pfc-sh73a0", + "tpu1_to2", "tpu1"), + PIN_MAP_MUX_GROUP_DEFAULT("renesas-tpu-pwm.2", "pfc-sh73a0", + "tpu2_to1", "tpu2"), + PIN_MAP_MUX_GROUP_DEFAULT("renesas-tpu-pwm.3", "pfc-sh73a0", + "tpu3_to0", "tpu3"), + PIN_MAP_MUX_GROUP_DEFAULT("renesas-tpu-pwm.4", "pfc-sh73a0", + "tpu4_to1", "tpu4"), }; static void __init kota2_init(void) @@ -524,6 +519,8 @@ static void __init kota2_init(void) pinctrl_register_mappings(kota2_pinctrl_map, ARRAY_SIZE(kota2_pinctrl_map)); + pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup)); + sh73a0_pinmux_init(); /* SMSC911X */ diff --git a/arch/arm/mach-shmobile/board-kzm9d-reference.c b/arch/arm/mach-shmobile/board-kzm9d-reference.c new file mode 100644 index 000000000000..a7b28b24ab38 --- /dev/null +++ b/arch/arm/mach-shmobile/board-kzm9d-reference.c @@ -0,0 +1,46 @@ +/* + * kzm9d board support - Reference DT implementation + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/init.h> +#include <linux/of_platform.h> +#include <mach/emev2.h> +#include <mach/common.h> +#include <asm/mach/arch.h> + +static void __init kzm9d_add_standard_devices(void) +{ + emev2_clock_init(); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char *kzm9d_boards_compat_dt[] __initdata = { + "renesas,kzm9d-reference", + NULL, +}; + +DT_MACHINE_START(KZM9D_DT, "kzm9d") + .smp = smp_ops(emev2_smp_ops), + .map_io = emev2_map_io, + .init_early = emev2_init_delay, + .init_machine = kzm9d_add_standard_devices, + .init_late = shmobile_init_late, + .dt_compat = kzm9d_boards_compat_dt, +MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c index 4368000e1127..30c2cc695b12 100644 --- a/arch/arm/mach-shmobile/board-kzm9d.c +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -85,9 +85,7 @@ static const char *kzm9d_boards_compat_dt[] __initdata = { DT_MACHINE_START(KZM9D_DT, "kzm9d") .smp = smp_ops(emev2_smp_ops), .map_io = emev2_map_io, - .init_early = emev2_add_early_devices, - .nr_irqs = NR_IRQS_LEGACY, - .init_irq = emev2_init_irq, + .init_early = emev2_init_delay, .init_machine = kzm9d_add_standard_devices, .init_late = shmobile_init_late, .dt_compat = kzm9d_boards_compat_dt, diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c index 44055fe8a45c..41092bb01ee5 100644 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c @@ -24,7 +24,6 @@ #include <linux/gpio.h> #include <linux/io.h> #include <linux/irq.h> -#include <linux/irqchip.h> #include <linux/input.h> #include <linux/of_platform.h> #include <linux/pinctrl/machine.h> @@ -99,7 +98,6 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g-reference") .map_io = sh73a0_map_io, .init_early = sh73a0_init_delay, .nr_irqs = NR_IRQS_LEGACY, - .init_irq = irqchip_init, .init_machine = kzm_init, .init_time = shmobile_timer_init, .dt_compat = kzm9g_boards_compat_dt, diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index d73e21d3ea8a..b161379a00f5 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -22,13 +22,18 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/interrupt.h> -#include <linux/irqchip.h> #include <linux/kernel.h> #include <linux/leds.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sh_mmcif.h> #include <linux/pinctrl/machine.h> #include <linux/platform_data/gpio-rcar.h> #include <linux/platform_device.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> +#include <linux/sh_eth.h> #include <mach/common.h> +#include <mach/irqs.h> #include <mach/r8a7790.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -71,6 +76,36 @@ static __initdata struct gpio_keys_platform_data lager_keys_pdata = { .nbuttons = ARRAY_SIZE(gpio_buttons), }; +/* Fixed 3.3V regulator to be used by MMCIF */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mmcif.1"), +}; + +/* MMCIF */ +static struct sh_mmcif_plat_data mmcif1_pdata __initdata = { + .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, +}; + +static struct resource mmcif1_resources[] __initdata = { + DEFINE_RES_MEM_NAMED(0xee220000, 0x80, "MMCIF1"), + DEFINE_RES_IRQ(gic_spi(170)), +}; + +/* Ether */ +static struct sh_eth_plat_data ether_pdata __initdata = { + .phy = 0x1, + .edmac_endian = EDMAC_LITTLE_ENDIAN, + .register_type = SH_ETH_REG_FAST_RCAR, + .phy_interface = PHY_INTERFACE_MODE_RMII, + .ether_link_active_low = 1, +}; + +static struct resource ether_resources[] __initdata = { + DEFINE_RES_MEM(0xee700000, 0x400), + DEFINE_RES_IRQ(gic_spi(162)), +}; + static const struct pinctrl_map lager_pinctrl_map[] = { /* SCIF0 (CN19: DEBUG SERIAL0) */ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790", @@ -78,6 +113,20 @@ static const struct pinctrl_map lager_pinctrl_map[] = { /* SCIF1 (CN20: DEBUG SERIAL1) */ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790", "scif1_data", "scif1"), + /* MMCIF1 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790", + "mmc1_data8", "mmc1"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790", + "mmc1_ctrl", "mmc1"), + /* Ether */ + PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790", + "eth_link", "eth"), + PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790", + "eth_mdio", "eth"), + PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790", + "eth_rmii", "eth"), + PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790", + "intc_irq0", "intc"), }; static void __init lager_add_standard_devices(void) @@ -95,6 +144,16 @@ static void __init lager_add_standard_devices(void) platform_device_register_data(&platform_bus, "gpio-keys", -1, &lager_keys_pdata, sizeof(lager_keys_pdata)); + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + platform_device_register_resndata(&platform_bus, "sh_mmcif", 1, + mmcif1_resources, ARRAY_SIZE(mmcif1_resources), + &mmcif1_pdata, sizeof(mmcif1_pdata)); + + platform_device_register_resndata(&platform_bus, "r8a7790-ether", -1, + ether_resources, + ARRAY_SIZE(ether_resources), + ðer_pdata, sizeof(ether_pdata)); } static const char *lager_boards_compat_dt[] __initdata = { @@ -103,7 +162,7 @@ static const char *lager_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(LAGER_DT, "lager") - .init_irq = irqchip_init, + .init_early = r8a7790_init_delay, .init_time = r8a7790_timer_init, .init_machine = lager_add_standard_devices, .dt_compat = lager_boards_compat_dt, diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 85f51a849a50..af06753eb809 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -41,6 +41,7 @@ #include <linux/mtd/physmap.h> #include <linux/mtd/sh_flctl.h> #include <linux/pinctrl/machine.h> +#include <linux/platform_data/gpio_backlight.h> #include <linux/pm_clock.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> @@ -49,7 +50,6 @@ #include <linux/tca6416_keypad.h> #include <linux/usb/renesas_usbhs.h> #include <linux/dma-mapping.h> - #include <video/sh_mobile_hdmi.h> #include <video/sh_mobile_lcdc.h> #include <media/sh_mobile_ceu.h> @@ -346,7 +346,7 @@ static struct platform_device meram_device = { }, }; -/* LCDC */ +/* LCDC and backlight */ static struct fb_videomode mackerel_lcdc_modes[] = { { .name = "WVGA Panel", @@ -362,13 +362,6 @@ static struct fb_videomode mackerel_lcdc_modes[] = { }, }; -static int mackerel_set_brightness(int brightness) -{ - gpio_set_value(31, brightness); - - return 0; -} - static const struct sh_mobile_meram_cfg lcd_meram_cfg = { .icb[0] = { .meram_size = 0x40, @@ -393,11 +386,6 @@ static struct sh_mobile_lcdc_info lcdc_info = { .width = 152, .height = 91, }, - .bl_info = { - .name = "sh_mobile_lcdc_bl", - .max_brightness = 1, - .set_brightness = mackerel_set_brightness, - }, .meram_cfg = &lcd_meram_cfg, } }; @@ -425,6 +413,20 @@ static struct platform_device lcdc_device = { }, }; +static struct gpio_backlight_platform_data gpio_backlight_data = { + .fbdev = &lcdc_device.dev, + .gpio = 31, + .def_value = 1, + .name = "backlight", +}; + +static struct platform_device gpio_backlight_device = { + .name = "gpio-backlight", + .dev = { + .platform_data = &gpio_backlight_data, + }, +}; + /* HDMI */ static struct sh_mobile_hdmi_info hdmi_info = { .flags = HDMI_SND_SRC_SPDIF, @@ -1231,6 +1233,7 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, + &gpio_backlight_device, &usbhs0_device, &usbhs1_device, &leds_device, @@ -1441,9 +1444,6 @@ static void __init mackerel_init(void) ARRAY_SIZE(mackerel_pinctrl_map)); sh7372_pinmux_init(); - /* backlight, off by default */ - gpio_request_one(31, GPIOF_OUT_INIT_LOW, NULL); - gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ /* USBHS0 */ diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c index 4710f1847bb7..5ac13ba71d54 100644 --- a/arch/arm/mach-shmobile/clock-emev2.c +++ b/arch/arm/mach-shmobile/clock-emev2.c @@ -40,7 +40,6 @@ #define USIB2SCLKDIV 0x65c #define USIB3SCLKDIV 0x660 #define STI_CLKSEL 0x688 -#define SMU_GENERAL_REG0 0x7c0 /* not pretty, but hey */ static void __iomem *smu_base; @@ -51,11 +50,6 @@ static void emev2_smu_write(unsigned long value, int offs) iowrite32(value, smu_base + offs); } -void emev2_set_boot_vector(unsigned long value) -{ - emev2_smu_write(value, SMU_GENERAL_REG0); -} - static struct clk_mapping smu_mapping = { .phys = EMEV2_SMU_BASE, .len = PAGE_SIZE, @@ -205,23 +199,11 @@ static struct clk_lookup lookups[] = { void __init emev2_clock_init(void) { int k, ret = 0; - static int is_setup; - - /* yuck, this is ugly as hell, but the non-smp case of clocks - * code is now designed to rely on ioremap() instead of static - * entity maps. in the case of smp we need access to the SMU - * register earlier than ioremap() is actually working without - * any static maps. to enable SMP in ugly but with dynamic - * mappings we have to call emev2_clock_init() from different - * places depending on UP and SMP... - */ - if (is_setup++) - return; smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE); BUG_ON(!smu_base); - /* setup STI timer to run on 37.768 kHz and deassert reset */ + /* setup STI timer to run on 32.768 kHz and deassert reset */ emev2_smu_write(0, STI_CLKSEL); emev2_smu_write(1, STI_RSTCTRL); diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c index 5f7fe628b8a1..8ea5ef6c79cc 100644 --- a/arch/arm/mach-shmobile/clock-r8a73a4.c +++ b/arch/arm/mach-shmobile/clock-r8a73a4.c @@ -30,10 +30,12 @@ #define SMSTPCR2 0xe6150138 #define SMSTPCR3 0xe615013c +#define SMSTPCR4 0xe6150140 #define SMSTPCR5 0xe6150144 #define FRQCRA 0xE6150000 #define FRQCRB 0xE6150004 +#define FRQCRC 0xE61500E0 #define VCLKCR1 0xE6150008 #define VCLKCR2 0xE615000C #define VCLKCR3 0xE615001C @@ -52,6 +54,7 @@ #define HSICKCR 0xE615026C #define M4CKCR 0xE6150098 #define PLLECR 0xE61500D0 +#define PLL0CR 0xE61500D8 #define PLL1CR 0xE6150028 #define PLL2CR 0xE615002C #define PLL2SCR 0xE61501F4 @@ -177,6 +180,7 @@ static struct sh_clk_ops pll_clk_ops = { .mapping = &cpg_mapping, \ } +PLL_CLOCK(pll0_clk, &main_clk, pll_parent_main, 1, 20, PLL0CR, 0); PLL_CLOCK(pll1_clk, &main_clk, pll_parent_main, 1, 7, PLL1CR, 1); PLL_CLOCK(pll2_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2CR, 2); PLL_CLOCK(pll2s_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2SCR, 4); @@ -184,6 +188,157 @@ PLL_CLOCK(pll2h_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2HCR, 5); SH_FIXED_RATIO_CLK(pll1_div2_clk, pll1_clk, div2); +static atomic_t frqcr_lock; + +/* Several clocks need to access FRQCRB, have to lock */ +static bool frqcr_kick_check(struct clk *clk) +{ + return !(ioread32(CPG_MAP(FRQCRB)) & BIT(31)); +} + +static int frqcr_kick_do(struct clk *clk) +{ + int i; + + /* set KICK bit in FRQCRB to update hardware setting, check success */ + iowrite32(ioread32(CPG_MAP(FRQCRB)) | BIT(31), CPG_MAP(FRQCRB)); + for (i = 1000; i; i--) + if (ioread32(CPG_MAP(FRQCRB)) & BIT(31)) + cpu_relax(); + else + return 0; + + return -ETIMEDOUT; +} + +static int zclk_set_rate(struct clk *clk, unsigned long rate) +{ + void __iomem *frqcrc; + int ret; + unsigned long step, p_rate; + u32 val; + + if (!clk->parent || !__clk_get(clk->parent)) + return -ENODEV; + + if (!atomic_inc_and_test(&frqcr_lock) || !frqcr_kick_check(clk)) { + ret = -EBUSY; + goto done; + } + + /* + * Users are supposed to first call clk_set_rate() only with + * clk_round_rate() results. So, we don't fix wrong rates here, but + * guard against them anyway + */ + + p_rate = clk_get_rate(clk->parent); + if (rate == p_rate) { + val = 0; + } else { + step = DIV_ROUND_CLOSEST(p_rate, 32); + + if (rate > p_rate || rate < step) { + ret = -EINVAL; + goto done; + } + + val = 32 - rate / step; + } + + frqcrc = clk->mapped_reg + (FRQCRC - (u32)clk->enable_reg); + + iowrite32((ioread32(frqcrc) & ~(clk->div_mask << clk->enable_bit)) | + (val << clk->enable_bit), frqcrc); + + ret = frqcr_kick_do(clk); + +done: + atomic_dec(&frqcr_lock); + __clk_put(clk->parent); + return ret; +} + +static long zclk_round_rate(struct clk *clk, unsigned long rate) +{ + /* + * theoretical rate = parent rate * multiplier / 32, + * where 1 <= multiplier <= 32. Therefore we should do + * multiplier = rate * 32 / parent rate + * rounded rate = parent rate * multiplier / 32. + * However, multiplication before division won't fit in 32 bits, so + * we sacrifice some precision by first dividing and then multiplying. + * To find the nearest divisor we calculate both and pick up the best + * one. This avoids 64-bit arithmetics. + */ + unsigned long step, mul_min, mul_max, rate_min, rate_max; + + rate_max = clk_get_rate(clk->parent); + + /* output freq <= parent */ + if (rate >= rate_max) + return rate_max; + + step = DIV_ROUND_CLOSEST(rate_max, 32); + /* output freq >= parent / 32 */ + if (step >= rate) + return step; + + mul_min = rate / step; + mul_max = DIV_ROUND_UP(rate, step); + rate_min = step * mul_min; + if (mul_max == mul_min) + return rate_min; + + rate_max = step * mul_max; + + if (rate_max - rate < rate - rate_min) + return rate_max; + + return rate_min; +} + +static unsigned long zclk_recalc(struct clk *clk) +{ + void __iomem *frqcrc = FRQCRC - (u32)clk->enable_reg + clk->mapped_reg; + unsigned int max = clk->div_mask + 1; + unsigned long val = ((ioread32(frqcrc) >> clk->enable_bit) & + clk->div_mask); + + return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent), max) * + (max - val); +} + +static struct sh_clk_ops zclk_ops = { + .recalc = zclk_recalc, + .set_rate = zclk_set_rate, + .round_rate = zclk_round_rate, +}; + +static struct clk z_clk = { + .parent = &pll0_clk, + .div_mask = 0x1f, + .enable_bit = 8, + /* We'll need to access FRQCRB and FRQCRC */ + .enable_reg = (void __iomem *)FRQCRB, + .ops = &zclk_ops, +}; + +/* + * It seems only 1/2 divider is usable in manual mode. 1/2 / 2/3 + * switching is only available in auto-DVFS mode + */ +SH_FIXED_RATIO_CLK(pll0_div2_clk, pll0_clk, div2); + +static struct clk z2_clk = { + .parent = &pll0_div2_clk, + .div_mask = 0x1f, + .enable_bit = 0, + /* We'll need to access FRQCRB and FRQCRC */ + .enable_reg = (void __iomem *)FRQCRB, + .ops = &zclk_ops, +}; + static struct clk *main_clks[] = { &extalr_clk, &extal1_clk, @@ -195,22 +350,23 @@ static struct clk *main_clks[] = { &main_div2_clk, &fsiack_clk, &fsibck_clk, + &pll0_clk, &pll1_clk, &pll1_div2_clk, &pll2_clk, &pll2s_clk, &pll2h_clk, + &z_clk, + &pll0_div2_clk, + &z2_clk, }; /* DIV4 */ static void div4_kick(struct clk *clk) { - unsigned long value; - - /* set KICK bit in FRQCRB to update hardware setting */ - value = ioread32(CPG_MAP(FRQCRB)); - value |= (1 << 31); - iowrite32(value, CPG_MAP(FRQCRB)); + if (!WARN(!atomic_inc_and_test(&frqcr_lock), "FRQCR* lock broken!\n")) + frqcr_kick_do(clk); + atomic_dec(&frqcr_lock); } static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10}; @@ -349,8 +505,10 @@ static struct clk div6_clks[DIV6_NR] = { /* MSTP */ enum { MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, - MSTP315, MSTP314, MSTP313, MSTP312, MSTP305, - MSTP522, + MSTP329, MSTP323, MSTP318, MSTP317, MSTP316, + MSTP315, MSTP314, MSTP313, MSTP312, MSTP305, MSTP300, + MSTP411, MSTP410, MSTP409, + MSTP522, MSTP515, MSTP_NR }; @@ -361,12 +519,22 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 7, 0), /* SCIFB1 */ [MSTP216] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 16, 0), /* SCIFB2 */ [MSTP217] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 17, 0), /* SCIFB3 */ + [MSTP300] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 0, 0), /* IIC2 */ [MSTP305] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC1],SMSTPCR3, 5, 0), /* MMCIF1 */ [MSTP312] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI2],SMSTPCR3, 12, 0), /* SDHI2 */ [MSTP313] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI1],SMSTPCR3, 13, 0), /* SDHI1 */ [MSTP314] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI0],SMSTPCR3, 14, 0), /* SDHI0 */ [MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0],SMSTPCR3, 15, 0), /* MMCIF0 */ + [MSTP316] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 16, 0), /* IIC6 */ + [MSTP317] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 17, 0), /* IIC7 */ + [MSTP318] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* IIC0 */ + [MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */ + [MSTP329] = SH_CLK_MSTP32(&extalr_clk, SMSTPCR3, 29, 0), /* CMT10 */ + [MSTP409] = SH_CLK_MSTP32(&main_div2_clk, SMSTPCR4, 9, 0), /* IIC5 */ + [MSTP410] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */ + [MSTP411] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */ [MSTP522] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR5, 22, 0), /* Thermal */ + [MSTP515] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR5, 15, 0), /* IIC8 */ }; static struct clk_lookup lookups[] = { @@ -386,6 +554,9 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("pll2s", &pll2s_clk), CLKDEV_CON_ID("pll2h", &pll2h_clk), + /* CPU clock */ + CLKDEV_DEV_ID("cpufreq-cpu0", &z_clk), + /* DIV6 */ CLKDEV_CON_ID("zb", &div6_clks[DIV6_ZB]), CLKDEV_CON_ID("vck1", &div6_clks[DIV6_VCK1]), @@ -408,6 +579,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]), CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), + CLKDEV_DEV_ID("e6520000.i2c", &mstp_clks[MSTP300]), CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]), CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]), CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]), @@ -418,6 +590,15 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]), CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]), CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]), + CLKDEV_DEV_ID("e6550000.i2c", &mstp_clks[MSTP316]), + CLKDEV_DEV_ID("e6560000.i2c", &mstp_clks[MSTP317]), + CLKDEV_DEV_ID("e6500000.i2c", &mstp_clks[MSTP318]), + CLKDEV_DEV_ID("e6510000.i2c", &mstp_clks[MSTP323]), + CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), + CLKDEV_DEV_ID("e60b0000.i2c", &mstp_clks[MSTP409]), + CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP410]), + CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP411]), + CLKDEV_DEV_ID("e6570000.i2c", &mstp_clks[MSTP515]), /* for DT */ CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]), @@ -429,6 +610,8 @@ void __init r8a73a4_clock_init(void) int k, ret = 0; u32 ckscr; + atomic_set(&frqcr_lock, -1); + reg = ioremap_nocache(CKSCR, PAGE_SIZE); BUG_ON(!reg); ckscr = ioread32(reg); diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index 5d71313df52d..50d96f9cf981 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -24,6 +24,7 @@ #include <linux/clkdev.h> #include <mach/clock.h> #include <mach/common.h> +#include <mach/r8a7790.h> /* * MD EXTAL PLL0 PLL1 PLL3 @@ -42,16 +43,15 @@ * see "p1 / 2" on R8A7790_CLOCK_ROOT() below */ -#define MD(nr) (1 << nr) - #define CPG_BASE 0xe6150000 #define CPG_LEN 0x1000 +#define SMSTPCR1 0xe6150134 #define SMSTPCR2 0xe6150138 #define SMSTPCR3 0xe615013c +#define SMSTPCR5 0xe6150144 #define SMSTPCR7 0xe615014c -#define MODEMR 0xE6160060 #define SDCKCR 0xE6150074 #define SD2CKCR 0xE6150078 #define SD3CKCR 0xE615007C @@ -182,14 +182,19 @@ static struct clk div6_clks[DIV6_NR] = { enum { MSTP721, MSTP720, MSTP717, MSTP716, + MSTP522, MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, + MSTP124, MSTP_NR }; static struct clk mstp_clks[MSTP_NR] = { [MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */ [MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */ + [MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */ + [MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */ + [MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */ [MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0], SMSTPCR3, 15, 0), /* MMC0 */ [MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_SD0], SMSTPCR3, 14, 0), /* SDHI0 */ [MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_SD1], SMSTPCR3, 13, 0), /* SDHI1 */ @@ -203,8 +208,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */ [MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */ [MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */ - [MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */ - [MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */ + [MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */ }; static struct clk_lookup lookups[] = { @@ -254,6 +258,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]), CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]), CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]), + CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]), CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]), CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]), @@ -266,6 +271,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]), CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]), CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]), + CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]), }; #define R8A7790_CLOCK_ROOT(e, m, p0, p1, p30, p31) \ @@ -280,14 +286,9 @@ static struct clk_lookup lookups[] = { void __init r8a7790_clock_init(void) { - void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE); - u32 mode; + u32 mode = r8a7790_read_mode_pins(); int k, ret = 0; - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); - switch (mode & (MD(14) | MD(13))) { case 0: R8A7790_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88); diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index d9fd0336b910..1942eaef5181 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -555,7 +555,7 @@ enum { MSTP001, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, MSTP331, MSTP329, MSTP328, MSTP325, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312, MSTP311, - MSTP303, MSTP302, MSTP301, MSTP300, + MSTP304, MSTP303, MSTP302, MSTP301, MSTP300, MSTP411, MSTP410, MSTP403, MSTP_NR }; @@ -593,6 +593,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */ [MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */ + [MSTP304] = MSTP(&main_div2_clk, SMSTPCR3, 4, 0), /* TPU0 */ [MSTP303] = MSTP(&main_div2_clk, SMSTPCR3, 3, 0), /* TPU1 */ [MSTP302] = MSTP(&main_div2_clk, SMSTPCR3, 2, 0), /* TPU2 */ [MSTP301] = MSTP(&main_div2_clk, SMSTPCR3, 1, 0), /* TPU3 */ @@ -669,10 +670,11 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMCIF0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */ CLKDEV_DEV_ID("ee140000.sdhi", &mstp_clks[MSTP311]), /* SDHI2 */ - CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */ - CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */ - CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */ - CLKDEV_DEV_ID("leds-renesas-tpu.41", &mstp_clks[MSTP300]), /* TPU4 */ + CLKDEV_DEV_ID("renesas-tpu-pwm.0", &mstp_clks[MSTP304]), /* TPU0 */ + CLKDEV_DEV_ID("renesas-tpu-pwm.1", &mstp_clks[MSTP303]), /* TPU1 */ + CLKDEV_DEV_ID("renesas-tpu-pwm.2", &mstp_clks[MSTP302]), /* TPU2 */ + CLKDEV_DEV_ID("renesas-tpu-pwm.3", &mstp_clks[MSTP301]), /* TPU3 */ + CLKDEV_DEV_ID("renesas-tpu-pwm.4", &mstp_clks[MSTP300]), /* TPU4 */ CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */ CLKDEV_DEV_ID("e6826000.i2c", &mstp_clks[MSTP411]), /* I2C3 */ CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */ diff --git a/arch/arm/mach-shmobile/include/mach/dma.h b/arch/arm/mach-shmobile/include/mach/dma.h deleted file mode 100644 index 40a8c178f10d..000000000000 --- a/arch/arm/mach-shmobile/include/mach/dma.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h index ac3751705cab..c2eb7568d9be 100644 --- a/arch/arm/mach-shmobile/include/mach/emev2.h +++ b/arch/arm/mach-shmobile/include/mach/emev2.h @@ -2,11 +2,9 @@ #define __ASM_EMEV2_H__ extern void emev2_map_io(void); -extern void emev2_init_irq(void); -extern void emev2_add_early_devices(void); +extern void emev2_init_delay(void); extern void emev2_add_standard_devices(void); extern void emev2_clock_init(void); -extern void emev2_set_boot_vector(unsigned long value); #define EMEV2_GPIO_BASE 200 #define EMEV2_GPIO_IRQ(n) (EMEV2_GPIO_BASE + (n)) diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/include/mach/r8a73a4.h index f043103e32c9..144a85e29245 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a73a4.h +++ b/arch/arm/mach-shmobile/include/mach/r8a73a4.h @@ -4,5 +4,6 @@ void r8a73a4_add_standard_devices(void); void r8a73a4_clock_init(void); void r8a73a4_pinmux_init(void); +void r8a73a4_init_delay(void); #endif /* __ASM_R8A73A4_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h index b34d19b5ca5c..56f375005fcd 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7740.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h @@ -42,6 +42,8 @@ enum { SHDMA_SLAVE_FSIB_TX, SHDMA_SLAVE_USBHS_TX, SHDMA_SLAVE_USBHS_RX, + SHDMA_SLAVE_MMCIF_TX, + SHDMA_SLAVE_MMCIF_RX, }; extern void r8a7740_meram_workaround(void); diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h index 851d027a2f06..9b561bf4229f 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7778.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h @@ -33,7 +33,6 @@ extern void r8a7778_add_mmc_device(struct sh_mmcif_plat_data *info); extern void r8a7778_init_late(void); extern void r8a7778_init_delay(void); -extern void r8a7778_init_irq(void); extern void r8a7778_init_irq_dt(void); extern void r8a7778_clock_init(void); extern void r8a7778_init_irq_extpin(int irlm); diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h index 2e919e61fa0d..7aaef409a059 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7790.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h @@ -4,6 +4,10 @@ void r8a7790_add_standard_devices(void); void r8a7790_clock_init(void); void r8a7790_pinmux_init(void); +void r8a7790_init_delay(void); void r8a7790_timer_init(void); +#define MD(nr) BIT(nr) +u32 r8a7790_read_mode_pins(void); + #endif /* __ASM_R8A7790_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h index eb7a4320d487..680dc5f1655a 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h @@ -1,378 +1,7 @@ #ifndef __ASM_SH73A0_H__ #define __ASM_SH73A0_H__ -/* Pin Function Controller: - * GPIO_FN_xx - GPIO used to select pin function and MSEL switch - * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU - */ -enum { - /* Hardware manual Table 25-1 (GPIO) */ - GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4, - GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9, - - GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14, - GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19, - - GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24, - GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29, - - GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34, - GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39, - - GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44, - GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49, - - GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54, - GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59, - - GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64, - GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69, - - GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74, - GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79, - - GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84, - GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89, - - GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94, - GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99, - - GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104, - GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109, - - GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114, - GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, - - GPIO_PORT128, GPIO_PORT129, - - GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134, - GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139, - - GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144, - GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149, - - GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154, - GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159, - - GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164, - - GPIO_PORT192, GPIO_PORT193, GPIO_PORT194, - GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199, - - GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204, - GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209, - - GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214, - GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219, - - GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224, - GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229, - - GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234, - GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239, - - GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244, - GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249, - - GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254, - GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259, - - GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264, - GPIO_PORT265, GPIO_PORT266, GPIO_PORT267, GPIO_PORT268, GPIO_PORT269, - - GPIO_PORT270, GPIO_PORT271, GPIO_PORT272, GPIO_PORT273, GPIO_PORT274, - GPIO_PORT275, GPIO_PORT276, GPIO_PORT277, GPIO_PORT278, GPIO_PORT279, - - GPIO_PORT280, GPIO_PORT281, GPIO_PORT282, - - GPIO_PORT288, GPIO_PORT289, - - GPIO_PORT290, GPIO_PORT291, GPIO_PORT292, GPIO_PORT293, GPIO_PORT294, - GPIO_PORT295, GPIO_PORT296, GPIO_PORT297, GPIO_PORT298, GPIO_PORT299, - - GPIO_PORT300, GPIO_PORT301, GPIO_PORT302, GPIO_PORT303, GPIO_PORT304, - GPIO_PORT305, GPIO_PORT306, GPIO_PORT307, GPIO_PORT308, GPIO_PORT309, - - /* Table 25-1 (Function 0-7) */ - GPIO_FN_GPI0 = 310, - GPIO_FN_GPI1, - GPIO_FN_GPI2, - GPIO_FN_GPI3, - GPIO_FN_GPI4, - GPIO_FN_GPI5, - GPIO_FN_GPI6, - GPIO_FN_GPI7, - GPIO_FN_GPO7, GPIO_FN_MFG0_OUT2, - GPIO_FN_GPO6, GPIO_FN_MFG1_OUT2, - GPIO_FN_GPO5, - GPIO_FN_PORT16_VIO_CKOR, - GPIO_FN_PORT19_VIO_CKO2, - GPIO_FN_GPO0, - GPIO_FN_GPO1, - GPIO_FN_GPO2, GPIO_FN_STATUS0, - GPIO_FN_GPO3, GPIO_FN_STATUS1, - GPIO_FN_GPO4, GPIO_FN_STATUS2, - GPIO_FN_VINT, - GPIO_FN_TCKON, - GPIO_FN_XDVFS1, - GPIO_FN_MFG0_OUT1, GPIO_FN_PORT27_IROUT, - GPIO_FN_XDVFS2, - GPIO_FN_PORT28_TPU1TO1, - GPIO_FN_SIM_RST, GPIO_FN_PORT29_TPU1TO1, - GPIO_FN_SIM_CLK, GPIO_FN_PORT30_VIO_CKOR, - GPIO_FN_SIM_D, GPIO_FN_PORT31_IROUT, - GPIO_FN_XWUP, - GPIO_FN_VACK, - GPIO_FN_XTAL1L, - GPIO_FN_PORT49_IROUT, - GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2, - - GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3, - GPIO_FN_BBIF2_TXD2, - GPIO_FN_TPU3TO3, - GPIO_FN_TPU3TO2, - GPIO_FN_TPU0TO0, - GPIO_FN_A0, GPIO_FN_BS_, - GPIO_FN_A12, GPIO_FN_TPU4TO2, - GPIO_FN_A13, GPIO_FN_TPU0TO1, - GPIO_FN_A14, - GPIO_FN_A15, - GPIO_FN_A16, GPIO_FN_MSIOF0_SS1, - GPIO_FN_A17, GPIO_FN_MSIOF0_TSYNC, - GPIO_FN_A18, GPIO_FN_MSIOF0_TSCK, - GPIO_FN_A19, GPIO_FN_MSIOF0_TXD, - GPIO_FN_A20, GPIO_FN_MSIOF0_RSCK, - GPIO_FN_A21, GPIO_FN_MSIOF0_RSYNC, - GPIO_FN_A22, GPIO_FN_MSIOF0_MCK0, - GPIO_FN_A23, GPIO_FN_MSIOF0_MCK1, - GPIO_FN_A24, GPIO_FN_MSIOF0_RXD, - GPIO_FN_A25, GPIO_FN_MSIOF0_SS2, - GPIO_FN_A26, - GPIO_FN_FCE1_, - GPIO_FN_DACK0, - GPIO_FN_FCE0_, - GPIO_FN_WAIT_, GPIO_FN_DREQ0, - GPIO_FN_FRB, - GPIO_FN_CKO, - GPIO_FN_NBRSTOUT_, - GPIO_FN_NBRST_, - GPIO_FN_BBIF2_TXD, - GPIO_FN_BBIF2_RXD, - GPIO_FN_BBIF2_SYNC, - GPIO_FN_BBIF2_SCK, - GPIO_FN_MFG3_IN2, - GPIO_FN_MFG3_IN1, - GPIO_FN_BBIF1_SS2, GPIO_FN_MFG3_OUT1, - GPIO_FN_HSI_RX_DATA, GPIO_FN_BBIF1_RXD, - GPIO_FN_HSI_TX_WAKE, GPIO_FN_BBIF1_TSCK, - GPIO_FN_HSI_TX_DATA, GPIO_FN_BBIF1_TSYNC, - GPIO_FN_HSI_TX_READY, GPIO_FN_BBIF1_TXD, - GPIO_FN_HSI_RX_READY, GPIO_FN_BBIF1_RSCK, - GPIO_FN_HSI_RX_WAKE, GPIO_FN_BBIF1_RSYNC, - GPIO_FN_HSI_RX_FLAG, GPIO_FN_BBIF1_SS1, GPIO_FN_BBIF1_FLOW, - GPIO_FN_HSI_TX_FLAG, - GPIO_FN_VIO_VD, GPIO_FN_VIO2_VD, - - GPIO_FN_VIO_HD, - GPIO_FN_VIO2_HD, - GPIO_FN_VIO_D0, GPIO_FN_PORT130_MSIOF2_RXD, - GPIO_FN_VIO_D1, GPIO_FN_PORT131_MSIOF2_SS1, - GPIO_FN_VIO_D2, GPIO_FN_PORT132_MSIOF2_SS2, - GPIO_FN_VIO_D3, GPIO_FN_MSIOF2_TSYNC, - GPIO_FN_VIO_D4, GPIO_FN_MSIOF2_TXD, - GPIO_FN_VIO_D5, GPIO_FN_MSIOF2_TSCK, - GPIO_FN_VIO_D6, - GPIO_FN_VIO_D7, - GPIO_FN_VIO_D8, GPIO_FN_VIO2_D0, - GPIO_FN_VIO_D9, GPIO_FN_VIO2_D1, - GPIO_FN_VIO_D10, GPIO_FN_TPU0TO2, GPIO_FN_VIO2_D2, - GPIO_FN_VIO_D11, GPIO_FN_TPU0TO3, GPIO_FN_VIO2_D3, - GPIO_FN_VIO_D12, GPIO_FN_VIO2_D4, - GPIO_FN_VIO_D13, - GPIO_FN_VIO2_D5, - GPIO_FN_VIO_D14, GPIO_FN_VIO2_D6, - GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3, - GPIO_FN_VIO2_D7, - GPIO_FN_VIO_CLK, - GPIO_FN_VIO2_CLK, - GPIO_FN_VIO_FIELD, GPIO_FN_VIO2_FIELD, - GPIO_FN_VIO_CKO, - GPIO_FN_A27, GPIO_FN_MFG0_IN1, - GPIO_FN_MFG0_IN2, - GPIO_FN_TS_SPSYNC3, GPIO_FN_MSIOF2_RSCK, - GPIO_FN_TS_SDAT3, GPIO_FN_MSIOF2_RSYNC, - GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT153_MSIOF2_SS1, - GPIO_FN_MSIOF2_MCK0, - GPIO_FN_MSIOF2_MCK1, - GPIO_FN_PORT156_MSIOF2_SS2, - GPIO_FN_PORT157_MSIOF2_RXD, - GPIO_FN_DINT_, GPIO_FN_TS_SCK3, - GPIO_FN_NMI, - GPIO_FN_TPU3TO0, - GPIO_FN_BBIF2_TSYNC1, - GPIO_FN_BBIF2_TSCK1, - GPIO_FN_BBIF2_TXD1, - GPIO_FN_MFG2_OUT2, - GPIO_FN_TPU2TO1, - GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2, - GPIO_FN_D16, - GPIO_FN_D17, - GPIO_FN_D18, - GPIO_FN_D19, - GPIO_FN_D20, - GPIO_FN_D21, - GPIO_FN_D22, - GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_D23, - GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_D24, - GPIO_FN_D25, - GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26, - GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27, - GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28, - GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29, - GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30, - GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31, - GPIO_FN_DACK2, - GPIO_FN_MSIOF0L_TSYNC, GPIO_FN_VIO2_FIELD3, - GPIO_FN_DACK3, - GPIO_FN_PORT218_VIO_CKOR, - GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_TSCK, GPIO_FN_VIO2_CLK3, \ - GPIO_FN_DREQ1, - GPIO_FN_PWEN, GPIO_FN_MSIOF0L_RXD, GPIO_FN_VIO2_HD3, \ - GPIO_FN_DACK1, GPIO_FN_OVCN, - GPIO_FN_MSIOF0L_TXD, GPIO_FN_VIO2_VD3, - - GPIO_FN_OVCN2, - GPIO_FN_EXTLP, GPIO_FN_PORT226_VIO_CKO2, - GPIO_FN_IDIN, - GPIO_FN_MFG1_IN1, - GPIO_FN_MSIOF1_TXD, - GPIO_FN_MSIOF1_TSYNC, - GPIO_FN_MSIOF1_TSCK, - GPIO_FN_MSIOF1_RXD, - GPIO_FN_MSIOF1_RSCK, GPIO_FN_VIO2_CLK2, - GPIO_FN_MSIOF1_RSYNC, GPIO_FN_MFG1_IN2, GPIO_FN_VIO2_VD2, \ - GPIO_FN_MSIOF1_MCK0, - GPIO_FN_MSIOF1_MCK1, - GPIO_FN_MSIOF1_SS1, GPIO_FN_VIO2_FIELD2, - GPIO_FN_MSIOF1_SS2, GPIO_FN_VIO2_HD2, - GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1, \ - GPIO_FN_TPU4TO0, - GPIO_FN_MFG4_IN2, - GPIO_FN_PORT243_VIO_CKO2, - GPIO_FN_MFG2_IN1, - GPIO_FN_MSIOF2R_RXD, - GPIO_FN_MFG2_IN2, - GPIO_FN_MSIOF2R_TXD, - GPIO_FN_MFG1_OUT1, - GPIO_FN_TPU1TO0, - GPIO_FN_MFG3_OUT2, - GPIO_FN_TPU3TO1, - GPIO_FN_MFG2_OUT1, - GPIO_FN_TPU2TO0, - GPIO_FN_MSIOF2R_TSCK, - GPIO_FN_PORT249_IROUT, GPIO_FN_MFG4_IN1, \ - GPIO_FN_MSIOF2R_TSYNC, - GPIO_FN_SDHICLK0, - GPIO_FN_SDHICD0, - GPIO_FN_SDHID0_0, - GPIO_FN_SDHID0_1, - GPIO_FN_SDHID0_2, - GPIO_FN_SDHID0_3, - GPIO_FN_SDHICMD0, - GPIO_FN_SDHIWP0, - GPIO_FN_SDHICLK1, - GPIO_FN_SDHID1_0, GPIO_FN_TS_SPSYNC2, - GPIO_FN_SDHID1_1, GPIO_FN_TS_SDAT2, - GPIO_FN_SDHID1_2, GPIO_FN_TS_SDEN2, - GPIO_FN_SDHID1_3, GPIO_FN_TS_SCK2, - GPIO_FN_SDHICMD1, - GPIO_FN_SDHICLK2, - GPIO_FN_SDHID2_0, GPIO_FN_TS_SPSYNC4, - GPIO_FN_SDHID2_1, GPIO_FN_TS_SDAT4, - GPIO_FN_SDHID2_2, GPIO_FN_TS_SDEN4, - GPIO_FN_SDHID2_3, GPIO_FN_TS_SCK4, - GPIO_FN_SDHICMD2, - GPIO_FN_MMCCLK0, - GPIO_FN_MMCD0_0, - GPIO_FN_MMCD0_1, - GPIO_FN_MMCD0_2, - GPIO_FN_MMCD0_3, - GPIO_FN_MMCD0_4, GPIO_FN_TS_SPSYNC5, - GPIO_FN_MMCD0_5, GPIO_FN_TS_SDAT5, - GPIO_FN_MMCD0_6, GPIO_FN_TS_SDEN5, - GPIO_FN_MMCD0_7, GPIO_FN_TS_SCK5, - GPIO_FN_MMCCMD0, - GPIO_FN_RESETOUTS_, GPIO_FN_EXTAL2OUT, - GPIO_FN_MCP_WAIT__MCP_FRB, - GPIO_FN_MCP_CKO, GPIO_FN_MMCCLK1, - GPIO_FN_MCP_D15_MCP_NAF15, - GPIO_FN_MCP_D14_MCP_NAF14, - GPIO_FN_MCP_D13_MCP_NAF13, - GPIO_FN_MCP_D12_MCP_NAF12, - GPIO_FN_MCP_D11_MCP_NAF11, - GPIO_FN_MCP_D10_MCP_NAF10, - GPIO_FN_MCP_D9_MCP_NAF9, - GPIO_FN_MCP_D8_MCP_NAF8, GPIO_FN_MMCCMD1, - GPIO_FN_MCP_D7_MCP_NAF7, GPIO_FN_MMCD1_7, - - GPIO_FN_MCP_D6_MCP_NAF6, GPIO_FN_MMCD1_6, - GPIO_FN_MCP_D5_MCP_NAF5, GPIO_FN_MMCD1_5, - GPIO_FN_MCP_D4_MCP_NAF4, GPIO_FN_MMCD1_4, - GPIO_FN_MCP_D3_MCP_NAF3, GPIO_FN_MMCD1_3, - GPIO_FN_MCP_D2_MCP_NAF2, GPIO_FN_MMCD1_2, - GPIO_FN_MCP_D1_MCP_NAF1, GPIO_FN_MMCD1_1, - GPIO_FN_MCP_D0_MCP_NAF0, GPIO_FN_MMCD1_0, - GPIO_FN_MCP_NBRSTOUT_, - GPIO_FN_MCP_WE0__MCP_FWE, GPIO_FN_MCP_RDWR_MCP_FWE, - - /* MSEL2 special case */ - GPIO_FN_TSIF2_TS_XX1, - GPIO_FN_TSIF2_TS_XX2, - GPIO_FN_TSIF2_TS_XX3, - GPIO_FN_TSIF2_TS_XX4, - GPIO_FN_TSIF2_TS_XX5, - GPIO_FN_TSIF1_TS_XX1, - GPIO_FN_TSIF1_TS_XX2, - GPIO_FN_TSIF1_TS_XX3, - GPIO_FN_TSIF1_TS_XX4, - GPIO_FN_TSIF1_TS_XX5, - GPIO_FN_TSIF0_TS_XX1, - GPIO_FN_TSIF0_TS_XX2, - GPIO_FN_TSIF0_TS_XX3, - GPIO_FN_TSIF0_TS_XX4, - GPIO_FN_TSIF0_TS_XX5, - GPIO_FN_MST1_TS_XX1, - GPIO_FN_MST1_TS_XX2, - GPIO_FN_MST1_TS_XX3, - GPIO_FN_MST1_TS_XX4, - GPIO_FN_MST1_TS_XX5, - GPIO_FN_MST0_TS_XX1, - GPIO_FN_MST0_TS_XX2, - GPIO_FN_MST0_TS_XX3, - GPIO_FN_MST0_TS_XX4, - GPIO_FN_MST0_TS_XX5, - - /* MSEL3 special cases */ - GPIO_FN_SDHI0_VCCQ_MC0_ON, - GPIO_FN_SDHI0_VCCQ_MC0_OFF, - GPIO_FN_DEBUG_MON_VIO, - GPIO_FN_DEBUG_MON_LCDD, - GPIO_FN_LCDC_LCDC0, - GPIO_FN_LCDC_LCDC1, - - /* MSEL4 special cases */ - GPIO_FN_IRQ9_MEM_INT, - GPIO_FN_IRQ9_MCP_INT, - GPIO_FN_A11, - GPIO_FN_TPU4TO3, - GPIO_FN_RESETA_N_PU_ON, - GPIO_FN_RESETA_N_PU_OFF, - GPIO_FN_EDBGREQ_PD, - GPIO_FN_EDBGREQ_PU, - - /* end of GPIO */ - GPIO_NR, -}; +#define GPIO_NR 310 /* DMA slave IDs */ enum { diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index 1ccddd228112..19980be7d6a9 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -20,7 +20,6 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/irqchip.h> #include <linux/platform_device.h> #include <linux/platform_data/gpio-em.h> #include <linux/of_platform.h> @@ -39,13 +38,6 @@ static struct map_desc emev2_io_desc[] __initdata = { #ifdef CONFIG_SMP - /* 128K entity map for 0xe0100000 (SMU) */ - { - .virtual = 0xe0100000, - .pfn = __phys_to_pfn(0xe0100000), - .length = SZ_128K, - .type = MT_DEVICE - }, /* 2M mapping for SCU + L2 controller */ { .virtual = 0xf0000000, @@ -63,102 +55,40 @@ void __init emev2_map_io(void) /* UART */ static struct resource uart0_resources[] = { - [0] = { - .start = 0xe1020000, - .end = 0xe1020037, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 40, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device uart0_device = { - .name = "serial8250-em", - .id = 0, - .num_resources = ARRAY_SIZE(uart0_resources), - .resource = uart0_resources, + DEFINE_RES_MEM(0xe1020000, 0x38), + DEFINE_RES_IRQ(40), }; static struct resource uart1_resources[] = { - [0] = { - .start = 0xe1030000, - .end = 0xe1030037, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 41, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device uart1_device = { - .name = "serial8250-em", - .id = 1, - .num_resources = ARRAY_SIZE(uart1_resources), - .resource = uart1_resources, + DEFINE_RES_MEM(0xe1030000, 0x38), + DEFINE_RES_IRQ(41), }; static struct resource uart2_resources[] = { - [0] = { - .start = 0xe1040000, - .end = 0xe1040037, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 42, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device uart2_device = { - .name = "serial8250-em", - .id = 2, - .num_resources = ARRAY_SIZE(uart2_resources), - .resource = uart2_resources, + DEFINE_RES_MEM(0xe1040000, 0x38), + DEFINE_RES_IRQ(42), }; static struct resource uart3_resources[] = { - [0] = { - .start = 0xe1050000, - .end = 0xe1050037, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 43, - .flags = IORESOURCE_IRQ, - } + DEFINE_RES_MEM(0xe1050000, 0x38), + DEFINE_RES_IRQ(43), }; -static struct platform_device uart3_device = { - .name = "serial8250-em", - .id = 3, - .num_resources = ARRAY_SIZE(uart3_resources), - .resource = uart3_resources, -}; +#define emev2_register_uart(idx) \ + platform_device_register_simple("serial8250-em", idx, \ + uart##idx##_resources, \ + ARRAY_SIZE(uart##idx##_resources)) /* STI */ static struct resource sti_resources[] = { - [0] = { - .name = "STI", - .start = 0xe0180000, - .end = 0xe0180053, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 157, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sti_device = { - .name = "em_sti", - .id = 0, - .resource = sti_resources, - .num_resources = ARRAY_SIZE(sti_resources), + DEFINE_RES_MEM(0xe0180000, 0x54), + DEFINE_RES_IRQ(157), }; +#define emev2_register_sti() \ + platform_device_register_simple("em_sti", 0, \ + sti_resources, \ + ARRAY_SIZE(sti_resources)) /* GIO */ static struct gpio_em_config gio0_config = { @@ -168,36 +98,10 @@ static struct gpio_em_config gio0_config = { }; static struct resource gio0_resources[] = { - [0] = { - .name = "GIO_000", - .start = 0xe0050000, - .end = 0xe005002b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "GIO_000", - .start = 0xe0050040, - .end = 0xe005005f, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 99, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 100, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device gio0_device = { - .name = "em_gio", - .id = 0, - .resource = gio0_resources, - .num_resources = ARRAY_SIZE(gio0_resources), - .dev = { - .platform_data = &gio0_config, - }, + DEFINE_RES_MEM(0xe0050000, 0x2c), + DEFINE_RES_MEM(0xe0050040, 0x20), + DEFINE_RES_IRQ(99), + DEFINE_RES_IRQ(100), }; static struct gpio_em_config gio1_config = { @@ -207,36 +111,10 @@ static struct gpio_em_config gio1_config = { }; static struct resource gio1_resources[] = { - [0] = { - .name = "GIO_032", - .start = 0xe0050080, - .end = 0xe00500ab, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "GIO_032", - .start = 0xe00500c0, - .end = 0xe00500df, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 101, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 102, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device gio1_device = { - .name = "em_gio", - .id = 1, - .resource = gio1_resources, - .num_resources = ARRAY_SIZE(gio1_resources), - .dev = { - .platform_data = &gio1_config, - }, + DEFINE_RES_MEM(0xe0050080, 0x2c), + DEFINE_RES_MEM(0xe00500c0, 0x20), + DEFINE_RES_IRQ(101), + DEFINE_RES_IRQ(102), }; static struct gpio_em_config gio2_config = { @@ -246,36 +124,10 @@ static struct gpio_em_config gio2_config = { }; static struct resource gio2_resources[] = { - [0] = { - .name = "GIO_064", - .start = 0xe0050100, - .end = 0xe005012b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "GIO_064", - .start = 0xe0050140, - .end = 0xe005015f, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 103, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 104, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device gio2_device = { - .name = "em_gio", - .id = 2, - .resource = gio2_resources, - .num_resources = ARRAY_SIZE(gio2_resources), - .dev = { - .platform_data = &gio2_config, - }, + DEFINE_RES_MEM(0xe0050100, 0x2c), + DEFINE_RES_MEM(0xe0050140, 0x20), + DEFINE_RES_IRQ(103), + DEFINE_RES_IRQ(104), }; static struct gpio_em_config gio3_config = { @@ -285,36 +137,10 @@ static struct gpio_em_config gio3_config = { }; static struct resource gio3_resources[] = { - [0] = { - .name = "GIO_096", - .start = 0xe0050180, - .end = 0xe00501ab, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "GIO_096", - .start = 0xe00501c0, - .end = 0xe00501df, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 105, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 106, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device gio3_device = { - .name = "em_gio", - .id = 3, - .resource = gio3_resources, - .num_resources = ARRAY_SIZE(gio3_resources), - .dev = { - .platform_data = &gio3_config, - }, + DEFINE_RES_MEM(0xe0050180, 0x2c), + DEFINE_RES_MEM(0xe00501c0, 0x20), + DEFINE_RES_IRQ(105), + DEFINE_RES_IRQ(106), }; static struct gpio_em_config gio4_config = { @@ -324,126 +150,52 @@ static struct gpio_em_config gio4_config = { }; static struct resource gio4_resources[] = { - [0] = { - .name = "GIO_128", - .start = 0xe0050200, - .end = 0xe005022b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "GIO_128", - .start = 0xe0050240, - .end = 0xe005025f, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 107, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 108, - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xe0050200, 0x2c), + DEFINE_RES_MEM(0xe0050240, 0x20), + DEFINE_RES_IRQ(107), + DEFINE_RES_IRQ(108), }; -static struct platform_device gio4_device = { - .name = "em_gio", - .id = 4, - .resource = gio4_resources, - .num_resources = ARRAY_SIZE(gio4_resources), - .dev = { - .platform_data = &gio4_config, - }, -}; +#define emev2_register_gio(idx) \ + platform_device_register_resndata(&platform_bus, "em_gio", \ + idx, gio##idx##_resources, \ + ARRAY_SIZE(gio##idx##_resources), \ + &gio##idx##_config, \ + sizeof(struct gpio_em_config)) static struct resource pmu_resources[] = { - [0] = { - .start = 152, - .end = 152, - .flags = IORESOURCE_IRQ, - }, - [1] = { - .start = 153, - .end = 153, - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_IRQ(152), + DEFINE_RES_IRQ(153), }; -static struct platform_device pmu_device = { - .name = "arm-pmu", - .id = -1, - .num_resources = ARRAY_SIZE(pmu_resources), - .resource = pmu_resources, -}; - -static struct platform_device *emev2_early_devices[] __initdata = { - &uart0_device, - &uart1_device, - &uart2_device, - &uart3_device, -}; - -static struct platform_device *emev2_late_devices[] __initdata = { - &sti_device, - &gio0_device, - &gio1_device, - &gio2_device, - &gio3_device, - &gio4_device, - &pmu_device, -}; +#define emev2_register_pmu() \ + platform_device_register_simple("arm-pmu", -1, \ + pmu_resources, \ + ARRAY_SIZE(pmu_resources)) void __init emev2_add_standard_devices(void) { emev2_clock_init(); - platform_add_devices(emev2_early_devices, - ARRAY_SIZE(emev2_early_devices)); - - platform_add_devices(emev2_late_devices, - ARRAY_SIZE(emev2_late_devices)); + emev2_register_uart(0); + emev2_register_uart(1); + emev2_register_uart(2); + emev2_register_uart(3); + emev2_register_sti(); + emev2_register_gio(0); + emev2_register_gio(1); + emev2_register_gio(2); + emev2_register_gio(3); + emev2_register_gio(4); + emev2_register_pmu(); } -static void __init emev2_init_delay(void) +void __init emev2_init_delay(void) { shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */ } -void __init emev2_add_early_devices(void) -{ - emev2_init_delay(); - - early_platform_add_devices(emev2_early_devices, - ARRAY_SIZE(emev2_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); -} - -void __init emev2_init_irq(void) -{ - void __iomem *gic_dist_base; - void __iomem *gic_cpu_base; - - /* Static mappings, never released */ - gic_dist_base = ioremap(0xe0028000, PAGE_SIZE); - gic_cpu_base = ioremap(0xe0020000, PAGE_SIZE); - BUG_ON(!gic_dist_base || !gic_cpu_base); - - /* Use GIC to handle interrupts */ - gic_init(0, 29, gic_dist_base, gic_cpu_base); -} - #ifdef CONFIG_USE_OF -static const struct of_dev_auxdata emev2_auxdata_lookup[] __initconst = { - { } -}; - -static void __init emev2_add_standard_devices_dt(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, - emev2_auxdata_lookup, NULL); -} static const char *emev2_boards_compat_dt[] __initdata = { "renesas,emev2", @@ -452,10 +204,8 @@ static const char *emev2_boards_compat_dt[] __initdata = { DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .smp = smp_ops(emev2_smp_ops), + .map_io = emev2_map_io, .init_early = emev2_init_delay, - .nr_irqs = NR_IRQS_LEGACY, - .init_irq = irqchip_init, - .init_machine = emev2_add_standard_devices_dt, .dt_compat = emev2_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c index 7f45c2edbca9..d533bd23865c 100644 --- a/arch/arm/mach-shmobile/setup-r8a73a4.c +++ b/arch/arm/mach-shmobile/setup-r8a73a4.c @@ -18,11 +18,11 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include <linux/irq.h> -#include <linux/irqchip.h> #include <linux/kernel.h> #include <linux/of_platform.h> #include <linux/platform_data/irq-renesas-irqc.h> #include <linux/serial_sci.h> +#include <linux/sh_timer.h> #include <mach/common.h> #include <mach/irqs.h> #include <mach/r8a73a4.h> @@ -169,6 +169,25 @@ static const struct resource thermal0_resources[] = { thermal0_resources, \ ARRAY_SIZE(thermal0_resources)) +static struct sh_timer_config cmt10_platform_data = { + .name = "CMT10", + .timer_bit = 0, + .clockevent_rating = 80, +}; + +static struct resource cmt10_resources[] = { + DEFINE_RES_MEM(0xe6130010, 0x0c), + DEFINE_RES_MEM(0xe6130000, 0x04), + DEFINE_RES_IRQ(gic_spi(120)), /* CMT1_0 */ +}; + +#define r8a7790_register_cmt(idx) \ + platform_device_register_resndata(&platform_bus, "sh_cmt", \ + idx, cmt##idx##_resources, \ + ARRAY_SIZE(cmt##idx##_resources), \ + &cmt##idx##_platform_data, \ + sizeof(struct sh_timer_config)) + void __init r8a73a4_add_standard_devices(void) { r8a73a4_register_scif(SCIFA0); @@ -180,11 +199,20 @@ void __init r8a73a4_add_standard_devices(void) r8a73a4_register_irqc(0); r8a73a4_register_irqc(1); r8a73a4_register_thermal(); + r8a7790_register_cmt(10); +} + +void __init r8a73a4_init_delay(void) +{ +#ifndef CONFIG_ARM_ARCH_TIMER + shmobile_setup_delay(1500, 2, 4); /* Cortex-A15 @ 1500MHz */ +#endif } #ifdef CONFIG_USE_OF void __init r8a73a4_add_standard_devices_dt(void) { + platform_device_register_simple("cpufreq-cpu0", -1, NULL, 0); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -194,7 +222,7 @@ static const char *r8a73a4_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)") - .init_irq = irqchip_init, + .init_early = r8a73a4_init_delay, .init_machine = r8a73a4_add_standard_devices_dt, .init_time = shmobile_timer_init, .dt_compat = r8a73a4_boards_compat_dt, diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 00c5a707238b..84c5bb6d9725 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -588,6 +588,16 @@ static const struct sh_dmae_slave_config r8a7740_dmae_slaves[] = { .addr = 0xfe1f0064, .chcr = CHCR_TX(XMIT_SZ_32BIT), .mid_rid = 0xb5, + }, { + .slave_id = SHDMA_SLAVE_MMCIF_TX, + .addr = 0xe6bd0034, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0xd1, + }, { + .slave_id = SHDMA_SLAVE_MMCIF_RX, + .addr = 0xe6bd0034, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0xd2, }, }; @@ -986,16 +996,22 @@ void __init r8a7740_add_early_devices(void) #ifdef CONFIG_USE_OF -static const struct of_dev_auxdata r8a7740_auxdata_lookup[] __initconst = { - { } -}; +void __init r8a7740_add_early_devices_dt(void) +{ + shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ + + early_platform_add_devices(r8a7740_early_devices, + ARRAY_SIZE(r8a7740_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); +} void __init r8a7740_add_standard_devices_dt(void) { platform_add_devices(r8a7740_devices_dt, ARRAY_SIZE(r8a7740_devices_dt)); - of_platform_populate(NULL, of_default_bus_match_table, - r8a7740_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } void __init r8a7740_init_delay(void) diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 80c20392ad7c..a3a2e37b03f3 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -53,7 +53,7 @@ .irqs = SCIx_IRQ_MUXED(irq), \ } -static struct plat_sci_port scif_platform_data[] = { +static struct plat_sci_port scif_platform_data[] __initdata = { SCIF_INFO(0xffe40000, gic_iid(0x66)), SCIF_INFO(0xffe41000, gic_iid(0x67)), SCIF_INFO(0xffe42000, gic_iid(0x68)), @@ -63,24 +63,24 @@ static struct plat_sci_port scif_platform_data[] = { }; /* TMU */ -static struct resource sh_tmu0_resources[] = { +static struct resource sh_tmu0_resources[] __initdata = { DEFINE_RES_MEM(0xffd80008, 12), DEFINE_RES_IRQ(gic_iid(0x40)), }; -static struct sh_timer_config sh_tmu0_platform_data = { +static struct sh_timer_config sh_tmu0_platform_data __initdata = { .name = "TMU00", .channel_offset = 0x4, .timer_bit = 0, .clockevent_rating = 200, }; -static struct resource sh_tmu1_resources[] = { +static struct resource sh_tmu1_resources[] __initdata = { DEFINE_RES_MEM(0xffd80014, 12), DEFINE_RES_IRQ(gic_iid(0x41)), }; -static struct sh_timer_config sh_tmu1_platform_data = { +static struct sh_timer_config sh_tmu1_platform_data __initdata = { .name = "TMU01", .channel_offset = 0x10, .timer_bit = 1, @@ -189,7 +189,7 @@ USB_PLATFORM_INFO(ehci); USB_PLATFORM_INFO(ohci); /* Ether */ -static struct resource ether_resources[] = { +static struct resource ether_resources[] __initdata = { DEFINE_RES_MEM(0xfde00000, 0x400), DEFINE_RES_IRQ(gic_iid(0x89)), }; @@ -203,17 +203,17 @@ void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata) } /* PFC/GPIO */ -static struct resource pfc_resources[] = { +static struct resource pfc_resources[] __initdata = { DEFINE_RES_MEM(0xfffc0000, 0x118), }; #define R8A7778_GPIO(idx) \ -static struct resource r8a7778_gpio##idx##_resources[] = { \ +static struct resource r8a7778_gpio##idx##_resources[] __initdata = { \ DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30), \ DEFINE_RES_IRQ(gic_iid(0x87)), \ }; \ \ -static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data = { \ +static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \ .gpio_base = 32 * (idx), \ .irq_base = GPIO_IRQ_BASE(idx), \ .number_of_pins = 32, \ @@ -249,7 +249,7 @@ void __init r8a7778_pinmux_init(void) }; /* SDHI */ -static struct resource sdhi_resources[] = { +static struct resource sdhi_resources[] __initdata = { /* SDHI0 */ DEFINE_RES_MEM(0xFFE4C000, 0x100), DEFINE_RES_IRQ(gic_iid(0x77)), @@ -365,12 +365,12 @@ void __init r8a7778_init_late(void) platform_device_register_full(&ohci_info); } -static struct renesas_intc_irqpin_config irqpin_platform_data = { +static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = { .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */ .sense_bitfield_width = 2, }; -static struct resource irqpin_resources[] = { +static struct resource irqpin_resources[] __initdata = { DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */ DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */ DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */ @@ -408,17 +408,25 @@ void __init r8a7778_init_irq_extpin(int irlm) &irqpin_platform_data, sizeof(irqpin_platform_data)); } +void __init r8a7778_init_delay(void) +{ + shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ +} + +#ifdef CONFIG_USE_OF #define INT2SMSKCR0 0x82288 /* 0xfe782288 */ #define INT2SMSKCR1 0x8228c /* 0xfe78228c */ #define INT2NTSR0 0x00018 /* 0xfe700018 */ #define INT2NTSR1 0x0002c /* 0xfe70002c */ -static void __init r8a7778_init_irq_common(void) +void __init r8a7778_init_irq_dt(void) { void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000); BUG_ON(!base); + irqchip_init(); + /* route all interrupts to ARM */ __raw_writel(0x73ffffff, base + INT2NTSR0); __raw_writel(0xffffffff, base + INT2NTSR1); @@ -430,43 +438,6 @@ static void __init r8a7778_init_irq_common(void) iounmap(base); } -void __init r8a7778_init_irq(void) -{ - void __iomem *gic_dist_base; - void __iomem *gic_cpu_base; - - gic_dist_base = ioremap_nocache(0xfe438000, PAGE_SIZE); - gic_cpu_base = ioremap_nocache(0xfe430000, PAGE_SIZE); - BUG_ON(!gic_dist_base || !gic_cpu_base); - - /* use GIC to handle interrupts */ - gic_init(0, 29, gic_dist_base, gic_cpu_base); - - r8a7778_init_irq_common(); -} - -void __init r8a7778_init_delay(void) -{ - shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ -} - -#ifdef CONFIG_USE_OF -void __init r8a7778_init_irq_dt(void) -{ - irqchip_init(); - r8a7778_init_irq_common(); -} - -static const struct of_dev_auxdata r8a7778_auxdata_lookup[] __initconst = { - {}, -}; - -void __init r8a7778_add_standard_devices_dt(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, - r8a7778_auxdata_lookup, NULL); -} - static const char *r8a7778_compat_dt[] __initdata = { "renesas,r8a7778", NULL, @@ -475,7 +446,6 @@ static const char *r8a7778_compat_dt[] __initdata = { DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)") .init_early = r8a7778_init_delay, .init_irq = r8a7778_init_irq_dt, - .init_machine = r8a7778_add_standard_devices_dt, .init_time = shmobile_timer_init, .dt_compat = r8a7778_compat_dt, .init_late = r8a7778_init_late, diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 398687761f50..66d38261ecaa 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -665,10 +665,6 @@ void __init r8a7779_init_delay(void) shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */ } -static const struct of_dev_auxdata r8a7779_auxdata_lookup[] __initconst = { - {}, -}; - void __init r8a7779_add_standard_devices_dt(void) { /* clocks are setup late during boot in the case of DT */ @@ -676,8 +672,7 @@ void __init r8a7779_add_standard_devices_dt(void) platform_add_devices(r8a7779_devices_dt, ARRAY_SIZE(r8a7779_devices_dt)); - of_platform_populate(NULL, of_default_bus_match_table, - r8a7779_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char *r8a7779_compat_dt[] __initdata = { diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index 28f94752b8ff..4c96dad21195 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -19,12 +19,12 @@ */ #include <linux/irq.h> -#include <linux/irqchip.h> #include <linux/kernel.h> #include <linux/of_platform.h> -#include <linux/serial_sci.h> #include <linux/platform_data/gpio-rcar.h> #include <linux/platform_data/irq-renesas-irqc.h> +#include <linux/serial_sci.h> +#include <linux/sh_timer.h> #include <mach/common.h> #include <mach/irqs.h> #include <mach/r8a7790.h> @@ -149,6 +149,36 @@ static struct resource irqc0_resources[] __initdata = { &irqc##idx##_data, \ sizeof(struct renesas_irqc_config)) +static struct resource thermal_resources[] __initdata = { + DEFINE_RES_MEM(0xe61f0000, 0x14), + DEFINE_RES_MEM(0xe61f0100, 0x38), + DEFINE_RES_IRQ(gic_spi(69)), +}; + +#define r8a7790_register_thermal() \ + platform_device_register_simple("rcar_thermal", -1, \ + thermal_resources, \ + ARRAY_SIZE(thermal_resources)) + +static struct sh_timer_config cmt00_platform_data = { + .name = "CMT00", + .timer_bit = 0, + .clockevent_rating = 80, +}; + +static struct resource cmt00_resources[] = { + DEFINE_RES_MEM(0xffca0510, 0x0c), + DEFINE_RES_MEM(0xffca0500, 0x04), + DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */ +}; + +#define r8a7790_register_cmt(idx) \ + platform_device_register_resndata(&platform_bus, "sh_cmt", \ + idx, cmt##idx##_resources, \ + ARRAY_SIZE(cmt##idx##_resources), \ + &cmt##idx##_platform_data, \ + sizeof(struct sh_timer_config)) + void __init r8a7790_add_standard_devices(void) { r8a7790_register_scif(SCIFA0); @@ -162,34 +192,91 @@ void __init r8a7790_add_standard_devices(void) r8a7790_register_scif(HSCIF0); r8a7790_register_scif(HSCIF1); r8a7790_register_irqc(0); + r8a7790_register_thermal(); + r8a7790_register_cmt(00); } +#define MODEMR 0xe6160060 + +u32 __init r8a7790_read_mode_pins(void) +{ + void __iomem *modemr = ioremap_nocache(MODEMR, 4); + u32 mode; + + BUG_ON(!modemr); + mode = ioread32(modemr); + iounmap(modemr); + + return mode; +} + +#define CNTCR 0 +#define CNTFID0 0x20 + void __init r8a7790_timer_init(void) { - void __iomem *cntcr; +#ifdef CONFIG_ARM_ARCH_TIMER + u32 mode = r8a7790_read_mode_pins(); + void __iomem *base; + int extal_mhz = 0; + u32 freq; + + /* At Linux boot time the r8a7790 arch timer comes up + * with the counter disabled. Moreover, it may also report + * a potentially incorrect fixed 13 MHz frequency. To be + * correct these registers need to be updated to use the + * frequency EXTAL / 2 which can be determined by the MD pins. + */ + + switch (mode & (MD(14) | MD(13))) { + case 0: + extal_mhz = 15; + break; + case MD(13): + extal_mhz = 20; + break; + case MD(14): + extal_mhz = 26; + break; + case MD(13) | MD(14): + extal_mhz = 30; + break; + } - /* make sure arch timer is started by setting bit 0 of CNTCT */ - cntcr = ioremap(0xe6080000, PAGE_SIZE); - iowrite32(1, cntcr); - iounmap(cntcr); + /* The arch timer frequency equals EXTAL / 2 */ + freq = extal_mhz * (1000000 / 2); + + /* Remap "armgcnt address map" space */ + base = ioremap(0xe6080000, PAGE_SIZE); + + /* Update registers with correct frequency */ + iowrite32(freq, base + CNTFID0); + asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq)); + + /* make sure arch timer is started by setting bit 0 of CNTCR */ + iowrite32(1, base + CNTCR); + iounmap(base); +#endif /* CONFIG_ARM_ARCH_TIMER */ shmobile_timer_init(); } -#ifdef CONFIG_USE_OF -void __init r8a7790_add_standard_devices_dt(void) +void __init r8a7790_init_delay(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +#ifndef CONFIG_ARM_ARCH_TIMER + shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */ +#endif } +#ifdef CONFIG_USE_OF + static const char *r8a7790_boards_compat_dt[] __initdata = { "renesas,r8a7790", NULL, }; DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)") - .init_irq = irqchip_init, - .init_machine = r8a7790_add_standard_devices_dt, + .init_early = r8a7790_init_delay, .init_time = r8a7790_timer_init, .dt_compat = r8a7790_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 5502d624aca6..13e6fdbde0a5 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -1147,10 +1147,6 @@ void __init sh7372_add_early_devices_dt(void) shmobile_setup_console(); } -static const struct of_dev_auxdata sh7372_auxdata_lookup[] __initconst = { - { } -}; - void __init sh7372_add_standard_devices_dt(void) { /* clocks are setup late during boot in the case of DT */ @@ -1159,8 +1155,7 @@ void __init sh7372_add_standard_devices_dt(void) platform_add_devices(sh7372_early_devices, ARRAY_SIZE(sh7372_early_devices)); - of_platform_populate(NULL, of_default_bus_match_table, - sh7372_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char *sh7372_boards_compat_dt[] __initdata = { diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 96e7ca1e4e11..516c2391b47a 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -22,7 +22,6 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/irqchip.h> #include <linux/platform_device.h> #include <linux/of_platform.h> #include <linux/delay.h> @@ -61,29 +60,16 @@ void __init sh73a0_map_io(void) iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc)); } -static struct resource sh73a0_pfc_resources[] = { - [0] = { - .start = 0xe6050000, - .end = 0xe6057fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0xe605801c, - .end = 0xe6058027, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device sh73a0_pfc_device = { - .name = "pfc-sh73a0", - .id = -1, - .resource = sh73a0_pfc_resources, - .num_resources = ARRAY_SIZE(sh73a0_pfc_resources), +/* PFC */ +static struct resource pfc_resources[] __initdata = { + DEFINE_RES_MEM(0xe6050000, 0x8000), + DEFINE_RES_MEM(0xe605801c, 0x000c), }; void __init sh73a0_pinmux_init(void) { - platform_device_register(&sh73a0_pfc_device); + platform_device_register_simple("pfc-sh73a0", -1, pfc_resources, + ARRAY_SIZE(pfc_resources)); } static struct plat_sci_port scif0_platform_data = { @@ -958,10 +944,6 @@ void __init sh73a0_add_early_devices(void) #ifdef CONFIG_USE_OF -static const struct of_dev_auxdata sh73a0_auxdata_lookup[] __initconst = { - {}, -}; - void __init sh73a0_add_standard_devices_dt(void) { struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, }; @@ -971,8 +953,7 @@ void __init sh73a0_add_standard_devices_dt(void) platform_add_devices(sh73a0_devices_dt, ARRAY_SIZE(sh73a0_devices_dt)); - of_platform_populate(NULL, of_default_bus_match_table, - sh73a0_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); /* Instantiate cpufreq-cpu0 */ platform_device_register_full(&devinfo); @@ -988,7 +969,6 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)") .map_io = sh73a0_map_io, .init_early = sh73a0_init_delay, .nr_irqs = NR_IRQS_LEGACY, - .init_irq = irqchip_init, .init_machine = sh73a0_add_standard_devices_dt, .dt_compat = sh73a0_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index 22a05a869d25..78e84c582453 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -29,6 +29,8 @@ #include <asm/smp_scu.h> #define EMEV2_SCU_BASE 0x1e000000 +#define EMEV2_SMU_BASE 0xe0110000 +#define SMU_GENERAL_REG0 0x7c0 static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle) { @@ -38,10 +40,18 @@ static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle) static void __init emev2_smp_prepare_cpus(unsigned int max_cpus) { + void __iomem *smu; + + /* setup EMEV2 specific SCU base, enable */ + shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE); scu_enable(shmobile_scu_base); /* Tell ROM loader about our vector (in headsmp-scu.S, headsmp.S) */ - emev2_set_boot_vector(__pa(shmobile_boot_vector)); + smu = ioremap(EMEV2_SMU_BASE, PAGE_SIZE); + if (smu) { + iowrite32(__pa(shmobile_boot_vector), smu + SMU_GENERAL_REG0); + iounmap(smu); + } shmobile_boot_fn = virt_to_phys(shmobile_boot_scu); shmobile_boot_arg = (unsigned long)shmobile_scu_base; @@ -49,21 +59,7 @@ static void __init emev2_smp_prepare_cpus(unsigned int max_cpus) scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL); } -static void __init emev2_smp_init_cpus(void) -{ - unsigned int ncores; - - /* setup EMEV2 specific SCU base */ - shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE); - emev2_clock_init(); /* need ioremapped SMU */ - - ncores = shmobile_scu_base ? scu_get_core_count(shmobile_scu_base) : 1; - - shmobile_smp_init_cpus(ncores); -} - struct smp_operations emev2_smp_ops __initdata = { - .smp_init_cpus = emev2_smp_init_cpus, .smp_prepare_cpus = emev2_smp_prepare_cpus, .smp_boot_secondary = emev2_boot_secondary, }; diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c index 8db0b981ca64..c492e1b3dfdb 100644 --- a/arch/arm/plat-orion/irq.c +++ b/arch/arm/plat-orion/irq.c @@ -47,7 +47,7 @@ static int __init orion_add_irq_domain(struct device_node *np, do { base = of_iomap(np, i); if (base) { - orion_irq_init(i * 32, base); + orion_irq_init(i * 32, base + 0x04); i++; } } while (base); |