diff options
Diffstat (limited to 'arch/arm')
222 files changed, 2039 insertions, 7132 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 72ad724c67ae..0365cbbc9179 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -621,30 +621,9 @@ config ARCH_PXA help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. -config ARCH_SHMOBILE_LEGACY - bool "Renesas ARM SoCs (non-multiplatform)" - select ARCH_SHMOBILE - select ARM_PATCH_PHYS_VIRT if MMU - select CLKDEV_LOOKUP - select CPU_V7 - select GENERIC_CLOCKEVENTS - select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if SMP - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 - select MULTI_IRQ_HANDLER - select NO_IOPORT_MAP - select PINCTRL - select PM_GENERIC_DOMAINS if PM - select SH_CLK_CPG - select SPARSE_IRQ - help - Support for Renesas ARM SoC platforms using a non-multiplatform - kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car - and RZ families. - config ARCH_RPC bool "RiscPC" + depends on MMU select ARCH_ACORN select ARCH_MAY_HAVE_PC_FDC select ARCH_SPARSEMEM_ENABLE @@ -736,7 +715,6 @@ config ARCH_DAVINCI select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select HAVE_IDE - select TI_PRIV_EDMA select USE_OF select ZONE_DMA help @@ -819,6 +797,7 @@ config ARCH_VIRT bool "Dummy Virtual Machine" if ARCH_MULTI_V7 select ARM_AMBA select ARM_GIC + select ARM_GIC_V3 select ARM_PSCI select HAVE_ARM_ARCH_TIMER @@ -1410,7 +1389,6 @@ config HAVE_ARM_ARCH_TIMER config HAVE_ARM_TWD bool - depends on SMP select CLKSRC_OF if OF help This options enables support for the ARM timer and watchdog unit @@ -1470,6 +1448,8 @@ choice config VMSPLIT_3G bool "3G/1G user/kernel split" + config VMSPLIT_3G_OPT + bool "3G/1G user/kernel split (for full 1G low memory)" config VMSPLIT_2G bool "2G/2G user/kernel split" config VMSPLIT_1G @@ -1481,6 +1461,7 @@ config PAGE_OFFSET default PHYS_OFFSET if !MMU default 0x40000000 if VMSPLIT_1G default 0x80000000 if VMSPLIT_2G + default 0xB0000000 if VMSPLIT_3G_OPT default 0xC0000000 config NR_CPUS @@ -1534,7 +1515,6 @@ config HZ_FIXED default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \ ARCH_S5PV210 || ARCH_EXYNOS4 default 128 if SOC_AT91RM9200 - default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY default 0 choice @@ -1695,8 +1675,9 @@ config HIGHMEM If unsure, say n. config HIGHPTE - bool "Allocate 2nd-level pagetables from highmem" + bool "Allocate 2nd-level pagetables from highmem" if EXPERT depends on HIGHMEM + default y help The VM uses one page of physical memory for each page table. For systems with a lot of processes, this can use a lot of @@ -1752,8 +1733,7 @@ config ARM_MODULE_PLTS source "mm/Kconfig" config FORCE_MAX_ZONEORDER - int "Maximum zone order" if ARCH_SHMOBILE_LEGACY - range 11 64 if ARCH_SHMOBILE_LEGACY + int "Maximum zone order" default "12" if SOC_AM33XX default "9" if SA1111 || ARCH_EFM32 default "11" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index abf65b67d5e0..259c0ca9c99a 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1612,8 +1612,7 @@ config DEBUG_UNCOMPRESS config UNCOMPRESS_INCLUDE string default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \ - PLAT_SAMSUNG || ARM_SINGLE_ARMV7M || \ - ARCH_SHMOBILE_LEGACY + PLAT_SAMSUNG || ARM_SINGLE_ARMV7M default "mach/uncompress.h" config EARLY_PRINTK diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 233159d2eaab..19b348ec65e8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -522,9 +522,6 @@ dtb-$(CONFIG_ARCH_S5PV210) += \ s5pv210-smdkc110.dtb \ s5pv210-smdkv210.dtb \ s5pv210-torbreck.dtb -dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \ - r8a7778-bockw.dtb \ - r8a7778-bockw-reference.dtb dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ emev2-kzm9d.dtb \ r7s72100-genmai.dtb \ @@ -578,7 +575,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-hackberry.dtb \ sun4i-a10-hyundai-a7hd.dtb \ sun4i-a10-inet97fv2.dtb \ - sun4i-a10-itead-iteaduino-plus.dts \ + sun4i-a10-itead-iteaduino-plus.dtb \ sun4i-a10-jesurun-q5.dtb \ sun4i-a10-marsboard.dtb \ sun4i-a10-mini-xplus.dtb \ @@ -740,5 +737,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb endif +dtstree := $(srctree)/$(src) +dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) + always := $(dtb-y) clean-files := *.dtb diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 0447c04a40cc..d83ff9c9701e 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -591,6 +591,7 @@ cpts_clock_mult = <0x80000000>; cpts_clock_shift = <29>; ranges; + syscon = <&scm_conf>; davinci_mdio: mdio@4a101000 { compatible = "ti,am4372-mdio","ti,davinci_mdio"; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 7da7c2da4af1..0bb36e9af936 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -502,7 +502,7 @@ reg = <0x38>; interrupt-parent = <&gpio0>; - interrupts = <31 0>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 568adf5efde0..d55e3ea89fda 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -402,11 +402,12 @@ /* SMPS9 unused */ ldo1_reg: ldo1 { - /* VDD_SD */ + /* VDD_SD / VDDSHV8 */ regulator-name = "ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; + regulator-always-on; }; ldo2_reg: ldo2 { diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index 89f5a95954ed..4047621b137e 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -46,7 +46,7 @@ / { model = "Marvell Armada 385 Access Point Development Board"; - compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x"; + compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada380"; chosen { stdout-path = "serial1:115200n8"; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 63a48490e2f9..d4dbd28d348c 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -152,7 +152,7 @@ }; usb_phy2: phy@a2f400 { - compatible = "marvell,berlin2-usb-phy"; + compatible = "marvell,berlin2cd-usb-phy"; reg = <0xa2f400 0x128>; #phy-cells = <0>; resets = <&chip_rst 0x104 14>; @@ -170,7 +170,7 @@ }; usb_phy0: phy@b74000 { - compatible = "marvell,berlin2-usb-phy"; + compatible = "marvell,berlin2cd-usb-phy"; reg = <0xb74000 0x128>; #phy-cells = <0>; resets = <&chip_rst 0x104 12>; @@ -178,7 +178,7 @@ }; usb_phy1: phy@b78000 { - compatible = "marvell,berlin2-usb-phy"; + compatible = "marvell,berlin2cd-usb-phy"; reg = <0xb78000 0x128>; #phy-cells = <0>; resets = <&chip_rst 0x104 13>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index e289c706d27d..8fedddc35999 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1448,6 +1448,7 @@ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; ranges; + syscon = <&scm_conf>; status = "disabled"; davinci_mdio: mdio@48485000 { diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts index b4031fa4a567..504cf45d3cb8 100644 --- a/arch/arm/boot/dts/efm32gg-dk3750.dts +++ b/arch/arm/boot/dts/efm32gg-dk3750.dts @@ -26,7 +26,7 @@ }; i2c@4000a000 { - efm32,location = <3>; + energymicro,location = <3>; status = "ok"; temp@48 { @@ -43,7 +43,7 @@ spi0: spi@4000c000 { /* USART0 */ cs-gpios = <&gpio 68 1>; // E4 - location = <1>; + energymicro,location = <1>; status = "ok"; microsd@0 { @@ -57,7 +57,7 @@ spi1: spi@4000c400 { /* USART1 */ cs-gpios = <&gpio 51 1>; // D3 - location = <1>; + energymicro,location = <1>; status = "ok"; ks8851@0 { @@ -70,7 +70,7 @@ }; uart4: uart@4000e400 { /* UART1 */ - location = <2>; + energymicro,location = <2>; status = "ok"; }; diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi index 106d505c5d3d..c747983771c7 100644 --- a/arch/arm/boot/dts/efm32gg.dtsi +++ b/arch/arm/boot/dts/efm32gg.dtsi @@ -23,7 +23,7 @@ soc { adc: adc@40002000 { - compatible = "efm32,adc"; + compatible = "energymicro,efm32-adc"; reg = <0x40002000 0x400>; interrupts = <7>; clocks = <&cmu clk_HFPERCLKADC0>; @@ -31,7 +31,7 @@ }; gpio: gpio@40006000 { - compatible = "efm32,gpio"; + compatible = "energymicro,efm32-gpio"; reg = <0x40006000 0x1000>; interrupts = <1 11>; gpio-controller; @@ -45,7 +45,7 @@ i2c0: i2c@4000a000 { #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,i2c"; + compatible = "energymicro,efm32-i2c"; reg = <0x4000a000 0x400>; interrupts = <9>; clocks = <&cmu clk_HFPERCLKI2C0>; @@ -56,7 +56,7 @@ i2c1: i2c@4000a400 { #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,i2c"; + compatible = "energymicro,efm32-i2c"; reg = <0x4000a400 0x400>; interrupts = <10>; clocks = <&cmu clk_HFPERCLKI2C1>; @@ -67,7 +67,7 @@ spi0: spi@4000c000 { /* USART0 */ #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,spi"; + compatible = "energymicro,efm32-spi"; reg = <0x4000c000 0x400>; interrupts = <3 4>; clocks = <&cmu clk_HFPERCLKUSART0>; @@ -77,7 +77,7 @@ spi1: spi@4000c400 { /* USART1 */ #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,spi"; + compatible = "energymicro,efm32-spi"; reg = <0x4000c400 0x400>; interrupts = <15 16>; clocks = <&cmu clk_HFPERCLKUSART1>; @@ -87,7 +87,7 @@ spi2: spi@4000c800 { /* USART2 */ #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,spi"; + compatible = "energymicro,efm32-spi"; reg = <0x4000c800 0x400>; interrupts = <18 19>; clocks = <&cmu clk_HFPERCLKUSART2>; @@ -95,7 +95,7 @@ }; uart0: uart@4000c000 { /* USART0 */ - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000c000 0x400>; interrupts = <3 4>; clocks = <&cmu clk_HFPERCLKUSART0>; @@ -103,7 +103,7 @@ }; uart1: uart@4000c400 { /* USART1 */ - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000c400 0x400>; interrupts = <15 16>; clocks = <&cmu clk_HFPERCLKUSART1>; @@ -111,7 +111,7 @@ }; uart2: uart@4000c800 { /* USART2 */ - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000c800 0x400>; interrupts = <18 19>; clocks = <&cmu clk_HFPERCLKUSART2>; @@ -119,7 +119,7 @@ }; uart3: uart@4000e000 { /* UART0 */ - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000e000 0x400>; interrupts = <20 21>; clocks = <&cmu clk_HFPERCLKUART0>; @@ -127,7 +127,7 @@ }; uart4: uart@4000e400 { /* UART1 */ - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000e400 0x400>; interrupts = <22 23>; clocks = <&cmu clk_HFPERCLKUART1>; @@ -135,28 +135,28 @@ }; timer0: timer@40010000 { - compatible = "efm32,timer"; + compatible = "energymicro,efm32-timer"; reg = <0x40010000 0x400>; interrupts = <2>; clocks = <&cmu clk_HFPERCLKTIMER0>; }; timer1: timer@40010400 { - compatible = "efm32,timer"; + compatible = "energymicro,efm32-timer"; reg = <0x40010400 0x400>; interrupts = <12>; clocks = <&cmu clk_HFPERCLKTIMER1>; }; timer2: timer@40010800 { - compatible = "efm32,timer"; + compatible = "energymicro,efm32-timer"; reg = <0x40010800 0x400>; interrupts = <13>; clocks = <&cmu clk_HFPERCLKTIMER2>; }; timer3: timer@40010c00 { - compatible = "efm32,timer"; + compatible = "energymicro,efm32-timer"; reg = <0x40010c00 0x400>; interrupts = <14>; clocks = <&cmu clk_HFPERCLKTIMER3>; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 955c24ee4a8c..8c24975e8f9d 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -35,28 +35,28 @@ button@1 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; label = "DSW2-1"; linux,code = <KEY_1>; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; button@2 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; label = "DSW2-2"; linux,code = <KEY_2>; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; button@3 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; label = "DSW2-3"; linux,code = <KEY_3>; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; }; button@4 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; label = "DSW2-4"; linux,code = <KEY_4>; gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index ca0e3c15977f..294cfe40388d 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -98,6 +98,7 @@ opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1000000>; clock-latency-ns = <200000>; + opp-suspend; }; opp07 { opp-hz = /bits/ 64 <900000000>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 15aea760c1da..c625e71217aa 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -197,6 +197,7 @@ regulator-name = "P1.8V_LDO_OUT10"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; ldo11_reg: LDO11 { diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 8f4d76c5e11c..1b95da79293c 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -915,6 +915,11 @@ }; }; +&pmu_system_controller { + assigned-clocks = <&pmu_system_controller 0>; + assigned-clock-parents = <&clock CLK_FIN_PLL>; +}; + &rtc { status = "okay"; clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index df9aee92ecf4..1b3d6c769a3c 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -1117,7 +1117,7 @@ interrupt-parent = <&combiner>; interrupts = <3 0>; clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>; + clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>; power-domains = <&disp_pd>; #iommu-cells = <0>; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 79ffdfe712aa..3b43e57845ae 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -472,7 +472,6 @@ */ pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; pinctrl-names = "default"; - samsung,pwm-outputs = <0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 7d5b386b5ae6..8f40c7e549bd 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -878,6 +878,11 @@ }; }; +&pmu_system_controller { + assigned-clocks = <&pmu_system_controller 0>; + assigned-clock-parents = <&clock CLK_FIN_PLL>; +}; + &rtc { status = "okay"; clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index a5b27c85a91c..4ea89344a5ff 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -13,6 +13,7 @@ /dts-v1/; #include "imx28.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Ka-Ro electronics TX28 module"; @@ -324,7 +325,7 @@ pinctrl-names = "default"; pinctrl-0 = <&tx28_edt_ft5x06_pins>; interrupt-parent = <&gpio2>; - interrupts = <5 0>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts index 66e47de5e826..96d7eede412e 100644 --- a/arch/arm/boot/dts/imx53-qsrb.dts +++ b/arch/arm/boot/dts/imx53-qsrb.dts @@ -36,7 +36,7 @@ pinctrl-0 = <&pinctrl_pmic>; reg = <0x08>; interrupt-parent = <&gpio5>; - interrupts = <23 0x8>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; regulators { sw1_reg: sw1a { regulator-name = "SW1"; diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts index 3b73e81dc3f0..13e842b0c785 100644 --- a/arch/arm/boot/dts/imx53-tx53-x03x.dts +++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts @@ -12,6 +12,7 @@ /dts-v1/; #include "imx53-tx53.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pwm/pwm.h> / { @@ -216,7 +217,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_edt_ft5x06_1>; interrupt-parent = <&gpio6>; - interrupts = <15 0>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index c3e3ca9362fb..cd170376eaca 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/clock/imx5-clock.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { aliases { diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi index 3373fd958e95..a50356243888 100644 --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi @@ -35,7 +35,6 @@ compatible = "regulator-fixed"; reg = <1>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1>; regulator-name = "usbh1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -47,7 +46,6 @@ compatible = "regulator-fixed"; reg = <2>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index da08de324e9e..13cb7ccfea44 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pwm/pwm.h> / { @@ -272,7 +273,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_edt_ft5x06>; interrupt-parent = <&gpio6>; - interrupts = <15 0>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; linux,wakeup; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index b738ce0f9d9b..6e444bb873f9 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -588,10 +588,10 @@ status = "disabled"; }; - uart2: serial@30870000 { + uart2: serial@30890000 { compatible = "fsl,imx7d-uart", "fsl,imx6q-uart"; - reg = <0x30870000 0x10000>; + reg = <0x30890000 0x10000>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_UART2_ROOT_CLK>, <&clks IMX7D_UART2_ROOT_CLK>; diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts index 36155b749d9f..d2d44df9c8c0 100644 --- a/arch/arm/boot/dts/kirkwood-net5big.dts +++ b/arch/arm/boot/dts/kirkwood-net5big.dts @@ -86,6 +86,66 @@ clock-frequency = <32768>; }; }; + + netxbig-leds { + blue-sata2 { + label = "netxbig:blue:sata2"; + mode-addr = <5>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 7 + NETXBIG_LED_SATA 1 + NETXBIG_LED_TIMER1 3>; + bright-addr = <2>; + max-brightness = <7>; + }; + red-sata2 { + label = "netxbig:red:sata2"; + mode-addr = <5>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <2>; + max-brightness = <7>; + }; + blue-sata3 { + label = "netxbig:blue:sata3"; + mode-addr = <6>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 7 + NETXBIG_LED_SATA 1 + NETXBIG_LED_TIMER1 3>; + bright-addr = <2>; + max-brightness = <7>; + }; + red-sata3 { + label = "netxbig:red:sata3"; + mode-addr = <6>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <2>; + max-brightness = <7>; + }; + blue-sata4 { + label = "netxbig:blue:sata4"; + mode-addr = <7>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 7 + NETXBIG_LED_SATA 1 + NETXBIG_LED_TIMER1 3>; + bright-addr = <2>; + max-brightness = <7>; + }; + red-sata4 { + label = "netxbig:red:sata4"; + mode-addr = <7>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <2>; + max-brightness = <7>; + }; + }; }; &mdio { diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi index 1508b12147df..62515a8b99b9 100644 --- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi +++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi @@ -13,6 +13,7 @@ * warranty of any kind, whether express or implied. */ +#include <dt-bindings/leds/leds-netxbig.h> #include "kirkwood.dtsi" #include "kirkwood-6281.dtsi" @@ -105,6 +106,85 @@ gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>; }; }; + + netxbig_gpio_ext: netxbig-gpio-ext { + compatible = "lacie,netxbig-gpio-ext"; + + addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH + &gpio1 16 GPIO_ACTIVE_HIGH + &gpio1 17 GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH + &gpio1 13 GPIO_ACTIVE_HIGH + &gpio1 14 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + + netxbig-leds { + compatible = "lacie,netxbig-leds"; + + gpio-ext = <&netxbig_gpio_ext>; + + timers = <NETXBIG_LED_TIMER1 500 500 + NETXBIG_LED_TIMER2 500 1000>; + + blue-power { + label = "netxbig:blue:power"; + mode-addr = <0>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 1 + NETXBIG_LED_TIMER1 3 + NETXBIG_LED_TIMER2 7>; + bright-addr = <1>; + max-brightness = <7>; + }; + red-power { + label = "netxbig:red:power"; + mode-addr = <0>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <1>; + max-brightness = <7>; + }; + blue-sata0 { + label = "netxbig:blue:sata0"; + mode-addr = <3>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 7 + NETXBIG_LED_SATA 1 + NETXBIG_LED_TIMER1 3>; + bright-addr = <2>; + max-brightness = <7>; + }; + red-sata0 { + label = "netxbig:red:sata0"; + mode-addr = <3>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <2>; + max-brightness = <7>; + }; + blue-sata1 { + label = "netxbig:blue:sata1"; + mode-addr = <4>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 7 + NETXBIG_LED_SATA 1 + NETXBIG_LED_TIMER1 3>; + bright-addr = <2>; + max-brightness = <7>; + }; + red-sata1 { + label = "netxbig:red:sata1"; + mode-addr = <4>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <2>; + max-brightness = <7>; + }; + }; }; &mdio { diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index 91146c318798..5b0430041ec6 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -12,7 +12,7 @@ / { model = "LogicPD Zoom DM3730 Torpedo Development Kit"; - compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap36xx"; + compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3"; gpio_keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 548441384d2a..8c77c87660cd 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -67,7 +67,7 @@ timer@c1109940 { compatible = "amlogic,meson6-timer"; - reg = <0xc1109940 0x14>; + reg = <0xc1109940 0x18>; interrupts = <0 10 1>; }; @@ -80,36 +80,37 @@ wdt: watchdog@c1109900 { compatible = "amlogic,meson6-wdt"; reg = <0xc1109900 0x8>; + interrupts = <0 0 1>; }; uart_AO: serial@c81004c0 { compatible = "amlogic,meson-uart"; - reg = <0xc81004c0 0x14>; + reg = <0xc81004c0 0x18>; interrupts = <0 90 1>; clocks = <&clk81>; status = "disabled"; }; - uart_A: serial@c81084c0 { + uart_A: serial@c11084c0 { compatible = "amlogic,meson-uart"; - reg = <0xc81084c0 0x14>; - interrupts = <0 90 1>; + reg = <0xc11084c0 0x18>; + interrupts = <0 26 1>; clocks = <&clk81>; status = "disabled"; }; - uart_B: serial@c81084dc { + uart_B: serial@c11084dc { compatible = "amlogic,meson-uart"; - reg = <0xc81084dc 0x14>; - interrupts = <0 90 1>; + reg = <0xc11084dc 0x18>; + interrupts = <0 75 1>; clocks = <&clk81>; status = "disabled"; }; - uart_C: serial@c8108700 { + uart_C: serial@c1108700 { compatible = "amlogic,meson-uart"; - reg = <0xc8108700 0x14>; - interrupts = <0 90 1>; + reg = <0xc1108700 0x18>; + interrupts = <0 93 1>; clocks = <&clk81>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index 16e8ce350dda..bb339d1648e0 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -13,7 +13,7 @@ / { model = "TI OMAP37XX EVM (TMDSEVM3730)"; - compatible = "ti,omap3-evm-37xx", "ti,omap36xx"; + compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts deleted file mode 100644 index dffa6ff30360..000000000000 --- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Reference Device Tree Source for the Bock-W board - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * based on r8a7779 - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Simon Horman - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "r8a7778.dtsi" -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "bockw"; - compatible = "renesas,bockw-reference", "renesas,r8a7778"; - - aliases { - serial0 = &scif0; - }; - - chosen { - bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw"; - stdout-path = &scif0; - }; - - memory { - device_type = "memory"; - reg = <0x60000000 0x10000000>; - }; - - fixedregulator3v3: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - ethernet@18300000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x18300000 0x1000>; - - phy-mode = "mii"; - interrupt-parent = <&irqpin>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; - reg-io-width = <4>; - vddvario-supply = <&fixedregulator3v3>; - vdd33a-supply = <&fixedregulator3v3>; - }; - -}; - -&mmcif { - pinctrl-0 = <&mmc_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&fixedregulator3v3>; - bus-width = <8>; - broken-cd; - status = "okay"; -}; - -&irqpin { - status = "okay"; -}; - -&tmu0 { - status = "okay"; -}; - -&pfc { - scif0_pins: serial0 { - renesas,groups = "scif0_data_a", "scif0_ctrl"; - renesas,function = "scif0"; - }; - - mmc_pins: mmc { - renesas,groups = "mmc_data8", "mmc_ctrl"; - renesas,function = "mmc"; - }; - - sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", - "sdhi0_cd"; - renesas,function = "sdhi0"; - }; - - hspi0_pins: hspi0 { - renesas,groups = "hspi0_a"; - renesas,function = "hspi0"; - }; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&fixedregulator3v3>; - bus-width = <4>; - status = "okay"; - wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; -}; - -&hspi0 { - pinctrl-0 = <&hspi0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spansion,s25fl008k", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <104000000>; - m25p,fast-read; - - partition@0 { - label = "data(spi)"; - reg = <0x00000000 0x00100000>; - }; - }; -}; - -&scif0 { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index a0b2a79cbfbd..4624d0f2a754 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1627,6 +1627,7 @@ "mix.0", "mix.1", "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&cpg_clocks>; status = "disabled"; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 831525dd39a6..1666c8a6b143 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1677,6 +1677,7 @@ "mix.0", "mix.1", "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&cpg_clocks>; status = "disabled"; diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi index b5334ecff13c..fec076eb7aef 100644 --- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi @@ -90,7 +90,7 @@ regulators { vccio_sd: LDO_REG4 { regulator-name = "vccio_sd"; - regulator-min-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-off-in-suspend; @@ -116,7 +116,12 @@ cap-sd-highspeed; card-detect-delay = <200>; cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; + rockchip,default-sample-phase = <90>; num-slots = <1>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; vmmc-supply = <&vcc33_sd>; vqmmc-supply = <&vccio_sd>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 275c78ccc0f3..860cea0a7613 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -149,7 +149,9 @@ broken-cd; bus-width = <8>; cap-mmc-highspeed; + rockchip,default-sample-phase = <158>; disable-wp; + mmc-hs200-1_8v; mmc-pwrseq = <&emmc_pwrseq>; non-removable; num-slots = <1>; @@ -355,6 +357,10 @@ num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; vmmc-supply = <&vcc33_sys>; vqmmc-supply = <&vcc18_wl>; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 906e938fb6bf..4e7c6b7392af 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -222,8 +222,9 @@ sdmmc: dwmmc@ff0c0000 { compatible = "rockchip,rk3288-dw-mshc"; clock-freq-min-max = <400000 150000000>; - clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; - clock-names = "biu", "ciu"; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; reg = <0xff0c0000 0x4000>; @@ -233,8 +234,9 @@ sdio0: dwmmc@ff0d0000 { compatible = "rockchip,rk3288-dw-mshc"; clock-freq-min-max = <400000 150000000>; - clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>; - clock-names = "biu", "ciu"; + clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>, + <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; reg = <0xff0d0000 0x4000>; @@ -244,8 +246,9 @@ sdio1: dwmmc@ff0e0000 { compatible = "rockchip,rk3288-dw-mshc"; clock-freq-min-max = <400000 150000000>; - clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>; - clock-names = "biu", "ciu"; + clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>, + <&cru SCLK_SDIO1_DRV>, <&cru SCLK_SDIO1_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; reg = <0xff0e0000 0x4000>; @@ -255,8 +258,9 @@ emmc: dwmmc@ff0f0000 { compatible = "rockchip,rk3288-dw-mshc"; clock-freq-min-max = <400000 150000000>; - clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; - clock-names = "biu", "ciu"; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; reg = <0xff0f0000 0x4000>; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 034cd48ae28b..cc05cde0f9a4 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -921,6 +921,20 @@ clocks = <&twi1_clk>; status = "disabled"; }; + + pioA: pinctrl@fc038000 { + compatible = "atmel,sama5d2-pinctrl"; + reg = <0xfc038000 0x600>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 7>, + <68 IRQ_TYPE_LEVEL_HIGH 7>, + <69 IRQ_TYPE_LEVEL_HIGH 7>, + <70 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&pioA_clk>; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index 810cda743b6d..9c2387b34d0c 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -56,7 +56,7 @@ /* VMMCI level-shifter enable */ default_hrefv60_cfg2 { pins = "GPIO169_D22"; - ste,config = <&gpio_out_lo>; + ste,config = <&gpio_out_hi>; }; /* VMMCI level-shifter voltage select */ default_hrefv60_cfg3 { diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 32a5ccb14e7e..e80e42163883 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -47,35 +47,35 @@ button@1 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <2>; label = "userpb"; gpios = <&gpio1 0 0x4>; }; button@2 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <3>; label = "extkb1"; gpios = <&gpio4 23 0x4>; }; button@3 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <4>; label = "extkb2"; gpios = <&gpio4 24 0x4>; }; button@4 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <5>; label = "extkb3"; gpios = <&gpio5 1 0x4>; }; button@5 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <6>; label = "extkb4"; gpios = <&gpio5 2 0x4>; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index ae0527754000..0c24fcb03577 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -610,5 +610,19 @@ clocks = <&clk_sysin>; st,pwm-num-chan = <4>; }; + + rng10: rng@08a89000 { + compatible = "st,rng"; + reg = <0x08a89000 0x1000>; + clocks = <&clk_sysin>; + status = "okay"; + }; + + rng11: rng@08a8a000 { + compatible = "st,rng"; + reg = <0x08a8a000 0x1000>; + clocks = <&clk_sysin>; + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index d78a4815da8f..5e1e234e8c0a 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -174,6 +174,13 @@ reg = <0x40023800 0x400>; clocks = <&clk_hse>; }; + + rng: rng@50060800 { + compatible = "st,stm32-rng"; + reg = <0x50060800 0x400>; + interrupts = <80>; + clocks = <&rcc 0 38>; + }; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 2bebaa286f9a..391230c3dc93 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -107,7 +107,7 @@ 720000 1200000 528000 1100000 312000 1000000 - 144000 900000 + 144000 1000000 >; #cooling-cells = <2>; cooling-min-level = <0>; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 9d4f86e9c50a..d845bd1448b5 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -234,7 +234,9 @@ gpio-controller; #interrupt-cells = <2>; interrupt-controller; + /* gpio-ranges = <&pinmux 0 0 246>; + */ }; apbmisc@70000800 { diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 1e204a6de12c..819e2ae2cabe 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -258,7 +258,9 @@ gpio-controller; #interrupt-cells = <2>; interrupt-controller; + /* gpio-ranges = <&pinmux 0 0 251>; + */ }; apbdma: dma@0,60020000 { diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index e058709e6d98..969b828505ae 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -244,7 +244,9 @@ gpio-controller; #interrupt-cells = <2>; interrupt-controller; + /* gpio-ranges = <&pinmux 0 0 224>; + */ }; apbmisc@70000800 { diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index fe04fb5e155f..c6938ad1b543 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -349,7 +349,9 @@ gpio-controller; #interrupt-cells = <2>; interrupt-controller; + /* gpio-ranges = <&pinmux 0 0 248>; + */ }; apbmisc@70000800 { diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts index 33963acd7e8f..f80f772d99fb 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts @@ -85,7 +85,7 @@ }; ðsc { - interrupts = <0 50 4>; + interrupts = <0 52 4>; }; &serial0 { diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index dc0457e40775..1a5220e05109 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -294,6 +294,11 @@ devcfg: devcfg@f8007000 { compatible = "xlnx,zynq-devcfg-1.0"; reg = <0xf8007000 0x100>; + interrupt-parent = <&intc>; + interrupts = <0 8 4>; + clocks = <&clkc 12>; + clock-names = "ref_clk"; + syscon = <&slcr>; }; global_timer: timer@f8f00200 { diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index c3a4e9ceba34..9353184d730d 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -17,6 +17,3 @@ config SHARP_PARAM config SHARP_SCOOP bool - -config TI_PRIV_EDMA - bool diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 6ee5959a813b..27f23b15b1ea 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -15,6 +15,5 @@ obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o CFLAGS_REMOVE_mcpm_entry.o = -pg AFLAGS_mcpm_head.o := -march=armv7-a AFLAGS_vlock.o := -march=armv7-a -obj-$(CONFIG_TI_PRIV_EDMA) += edma.o obj-$(CONFIG_BL_SWITCHER) += bL_switcher.o obj-$(CONFIG_BL_SWITCHER_DUMMY_IF) += bL_switcher_dummy_if.o diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c deleted file mode 100644 index 873dbfcc7dc9..000000000000 --- a/arch/arm/common/edma.c +++ /dev/null @@ -1,1876 +0,0 @@ -/* - * EDMA3 support for DaVinci - * - * Copyright (C) 2006-2009 Texas Instruments. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/err.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/edma.h> -#include <linux/dma-mapping.h> -#include <linux/of_address.h> -#include <linux/of_device.h> -#include <linux/of_dma.h> -#include <linux/of_irq.h> -#include <linux/pm_runtime.h> - -#include <linux/platform_data/edma.h> - -/* Offsets matching "struct edmacc_param" */ -#define PARM_OPT 0x00 -#define PARM_SRC 0x04 -#define PARM_A_B_CNT 0x08 -#define PARM_DST 0x0c -#define PARM_SRC_DST_BIDX 0x10 -#define PARM_LINK_BCNTRLD 0x14 -#define PARM_SRC_DST_CIDX 0x18 -#define PARM_CCNT 0x1c - -#define PARM_SIZE 0x20 - -/* Offsets for EDMA CC global channel registers and their shadows */ -#define SH_ER 0x00 /* 64 bits */ -#define SH_ECR 0x08 /* 64 bits */ -#define SH_ESR 0x10 /* 64 bits */ -#define SH_CER 0x18 /* 64 bits */ -#define SH_EER 0x20 /* 64 bits */ -#define SH_EECR 0x28 /* 64 bits */ -#define SH_EESR 0x30 /* 64 bits */ -#define SH_SER 0x38 /* 64 bits */ -#define SH_SECR 0x40 /* 64 bits */ -#define SH_IER 0x50 /* 64 bits */ -#define SH_IECR 0x58 /* 64 bits */ -#define SH_IESR 0x60 /* 64 bits */ -#define SH_IPR 0x68 /* 64 bits */ -#define SH_ICR 0x70 /* 64 bits */ -#define SH_IEVAL 0x78 -#define SH_QER 0x80 -#define SH_QEER 0x84 -#define SH_QEECR 0x88 -#define SH_QEESR 0x8c -#define SH_QSER 0x90 -#define SH_QSECR 0x94 -#define SH_SIZE 0x200 - -/* Offsets for EDMA CC global registers */ -#define EDMA_REV 0x0000 -#define EDMA_CCCFG 0x0004 -#define EDMA_QCHMAP 0x0200 /* 8 registers */ -#define EDMA_DMAQNUM 0x0240 /* 8 registers (4 on OMAP-L1xx) */ -#define EDMA_QDMAQNUM 0x0260 -#define EDMA_QUETCMAP 0x0280 -#define EDMA_QUEPRI 0x0284 -#define EDMA_EMR 0x0300 /* 64 bits */ -#define EDMA_EMCR 0x0308 /* 64 bits */ -#define EDMA_QEMR 0x0310 -#define EDMA_QEMCR 0x0314 -#define EDMA_CCERR 0x0318 -#define EDMA_CCERRCLR 0x031c -#define EDMA_EEVAL 0x0320 -#define EDMA_DRAE 0x0340 /* 4 x 64 bits*/ -#define EDMA_QRAE 0x0380 /* 4 registers */ -#define EDMA_QUEEVTENTRY 0x0400 /* 2 x 16 registers */ -#define EDMA_QSTAT 0x0600 /* 2 registers */ -#define EDMA_QWMTHRA 0x0620 -#define EDMA_QWMTHRB 0x0624 -#define EDMA_CCSTAT 0x0640 - -#define EDMA_M 0x1000 /* global channel registers */ -#define EDMA_ECR 0x1008 -#define EDMA_ECRH 0x100C -#define EDMA_SHADOW0 0x2000 /* 4 regions shadowing global channels */ -#define EDMA_PARM 0x4000 /* 128 param entries */ - -#define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5)) - -#define EDMA_DCHMAP 0x0100 /* 64 registers */ - -/* CCCFG register */ -#define GET_NUM_DMACH(x) (x & 0x7) /* bits 0-2 */ -#define GET_NUM_PAENTRY(x) ((x & 0x7000) >> 12) /* bits 12-14 */ -#define GET_NUM_EVQUE(x) ((x & 0x70000) >> 16) /* bits 16-18 */ -#define GET_NUM_REGN(x) ((x & 0x300000) >> 20) /* bits 20-21 */ -#define CHMAP_EXIST BIT(24) - -#define EDMA_MAX_DMACH 64 -#define EDMA_MAX_PARAMENTRY 512 - -/*****************************************************************************/ - -static void __iomem *edmacc_regs_base[EDMA_MAX_CC]; - -static inline unsigned int edma_read(unsigned ctlr, int offset) -{ - return (unsigned int)__raw_readl(edmacc_regs_base[ctlr] + offset); -} - -static inline void edma_write(unsigned ctlr, int offset, int val) -{ - __raw_writel(val, edmacc_regs_base[ctlr] + offset); -} -static inline void edma_modify(unsigned ctlr, int offset, unsigned and, - unsigned or) -{ - unsigned val = edma_read(ctlr, offset); - val &= and; - val |= or; - edma_write(ctlr, offset, val); -} -static inline void edma_and(unsigned ctlr, int offset, unsigned and) -{ - unsigned val = edma_read(ctlr, offset); - val &= and; - edma_write(ctlr, offset, val); -} -static inline void edma_or(unsigned ctlr, int offset, unsigned or) -{ - unsigned val = edma_read(ctlr, offset); - val |= or; - edma_write(ctlr, offset, val); -} -static inline unsigned int edma_read_array(unsigned ctlr, int offset, int i) -{ - return edma_read(ctlr, offset + (i << 2)); -} -static inline void edma_write_array(unsigned ctlr, int offset, int i, - unsigned val) -{ - edma_write(ctlr, offset + (i << 2), val); -} -static inline void edma_modify_array(unsigned ctlr, int offset, int i, - unsigned and, unsigned or) -{ - edma_modify(ctlr, offset + (i << 2), and, or); -} -static inline void edma_or_array(unsigned ctlr, int offset, int i, unsigned or) -{ - edma_or(ctlr, offset + (i << 2), or); -} -static inline void edma_or_array2(unsigned ctlr, int offset, int i, int j, - unsigned or) -{ - edma_or(ctlr, offset + ((i*2 + j) << 2), or); -} -static inline void edma_write_array2(unsigned ctlr, int offset, int i, int j, - unsigned val) -{ - edma_write(ctlr, offset + ((i*2 + j) << 2), val); -} -static inline unsigned int edma_shadow0_read(unsigned ctlr, int offset) -{ - return edma_read(ctlr, EDMA_SHADOW0 + offset); -} -static inline unsigned int edma_shadow0_read_array(unsigned ctlr, int offset, - int i) -{ - return edma_read(ctlr, EDMA_SHADOW0 + offset + (i << 2)); -} -static inline void edma_shadow0_write(unsigned ctlr, int offset, unsigned val) -{ - edma_write(ctlr, EDMA_SHADOW0 + offset, val); -} -static inline void edma_shadow0_write_array(unsigned ctlr, int offset, int i, - unsigned val) -{ - edma_write(ctlr, EDMA_SHADOW0 + offset + (i << 2), val); -} -static inline unsigned int edma_parm_read(unsigned ctlr, int offset, - int param_no) -{ - return edma_read(ctlr, EDMA_PARM + offset + (param_no << 5)); -} -static inline void edma_parm_write(unsigned ctlr, int offset, int param_no, - unsigned val) -{ - edma_write(ctlr, EDMA_PARM + offset + (param_no << 5), val); -} -static inline void edma_parm_modify(unsigned ctlr, int offset, int param_no, - unsigned and, unsigned or) -{ - edma_modify(ctlr, EDMA_PARM + offset + (param_no << 5), and, or); -} -static inline void edma_parm_and(unsigned ctlr, int offset, int param_no, - unsigned and) -{ - edma_and(ctlr, EDMA_PARM + offset + (param_no << 5), and); -} -static inline void edma_parm_or(unsigned ctlr, int offset, int param_no, - unsigned or) -{ - edma_or(ctlr, EDMA_PARM + offset + (param_no << 5), or); -} - -static inline void set_bits(int offset, int len, unsigned long *p) -{ - for (; len > 0; len--) - set_bit(offset + (len - 1), p); -} - -static inline void clear_bits(int offset, int len, unsigned long *p) -{ - for (; len > 0; len--) - clear_bit(offset + (len - 1), p); -} - -/*****************************************************************************/ - -/* actual number of DMA channels and slots on this silicon */ -struct edma { - /* how many dma resources of each type */ - unsigned num_channels; - unsigned num_region; - unsigned num_slots; - unsigned num_tc; - enum dma_event_q default_queue; - - /* list of channels with no even trigger; terminated by "-1" */ - const s8 *noevent; - - struct edma_soc_info *info; - - /* The edma_inuse bit for each PaRAM slot is clear unless the - * channel is in use ... by ARM or DSP, for QDMA, or whatever. - */ - DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY); - - /* The edma_unused bit for each channel is clear unless - * it is not being used on this platform. It uses a bit - * of SOC-specific initialization code. - */ - DECLARE_BITMAP(edma_unused, EDMA_MAX_DMACH); - - unsigned irq_res_start; - unsigned irq_res_end; - - struct dma_interrupt_data { - void (*callback)(unsigned channel, unsigned short ch_status, - void *data); - void *data; - } intr_data[EDMA_MAX_DMACH]; -}; - -static struct edma *edma_cc[EDMA_MAX_CC]; -static int arch_num_cc; - -/* dummy param set used to (re)initialize parameter RAM slots */ -static const struct edmacc_param dummy_paramset = { - .link_bcntrld = 0xffff, - .ccnt = 1, -}; - -static const struct of_device_id edma_of_ids[] = { - { .compatible = "ti,edma3", }, - {} -}; - -/*****************************************************************************/ - -static void map_dmach_queue(unsigned ctlr, unsigned ch_no, - enum dma_event_q queue_no) -{ - int bit = (ch_no & 0x7) * 4; - - /* default to low priority queue */ - if (queue_no == EVENTQ_DEFAULT) - queue_no = edma_cc[ctlr]->default_queue; - - queue_no &= 7; - edma_modify_array(ctlr, EDMA_DMAQNUM, (ch_no >> 3), - ~(0x7 << bit), queue_no << bit); -} - -static void assign_priority_to_queue(unsigned ctlr, int queue_no, - int priority) -{ - int bit = queue_no * 4; - edma_modify(ctlr, EDMA_QUEPRI, ~(0x7 << bit), - ((priority & 0x7) << bit)); -} - -/** - * map_dmach_param - Maps channel number to param entry number - * - * This maps the dma channel number to param entry numberter. In - * other words using the DMA channel mapping registers a param entry - * can be mapped to any channel - * - * Callers are responsible for ensuring the channel mapping logic is - * included in that particular EDMA variant (Eg : dm646x) - * - */ -static void map_dmach_param(unsigned ctlr) -{ - int i; - for (i = 0; i < EDMA_MAX_DMACH; i++) - edma_write_array(ctlr, EDMA_DCHMAP , i , (i << 5)); -} - -static inline void -setup_dma_interrupt(unsigned lch, - void (*callback)(unsigned channel, u16 ch_status, void *data), - void *data) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(lch); - lch = EDMA_CHAN_SLOT(lch); - - if (!callback) - edma_shadow0_write_array(ctlr, SH_IECR, lch >> 5, - BIT(lch & 0x1f)); - - edma_cc[ctlr]->intr_data[lch].callback = callback; - edma_cc[ctlr]->intr_data[lch].data = data; - - if (callback) { - edma_shadow0_write_array(ctlr, SH_ICR, lch >> 5, - BIT(lch & 0x1f)); - edma_shadow0_write_array(ctlr, SH_IESR, lch >> 5, - BIT(lch & 0x1f)); - } -} - -static int irq2ctlr(int irq) -{ - if (irq >= edma_cc[0]->irq_res_start && irq <= edma_cc[0]->irq_res_end) - return 0; - else if (irq >= edma_cc[1]->irq_res_start && - irq <= edma_cc[1]->irq_res_end) - return 1; - - return -1; -} - -/****************************************************************************** - * - * DMA interrupt handler - * - *****************************************************************************/ -static irqreturn_t dma_irq_handler(int irq, void *data) -{ - int ctlr; - u32 sh_ier; - u32 sh_ipr; - u32 bank; - - ctlr = irq2ctlr(irq); - if (ctlr < 0) - return IRQ_NONE; - - dev_dbg(data, "dma_irq_handler\n"); - - sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 0); - if (!sh_ipr) { - sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 1); - if (!sh_ipr) - return IRQ_NONE; - sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 1); - bank = 1; - } else { - sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 0); - bank = 0; - } - - do { - u32 slot; - u32 channel; - - dev_dbg(data, "IPR%d %08x\n", bank, sh_ipr); - - slot = __ffs(sh_ipr); - sh_ipr &= ~(BIT(slot)); - - if (sh_ier & BIT(slot)) { - channel = (bank << 5) | slot; - /* Clear the corresponding IPR bits */ - edma_shadow0_write_array(ctlr, SH_ICR, bank, - BIT(slot)); - if (edma_cc[ctlr]->intr_data[channel].callback) - edma_cc[ctlr]->intr_data[channel].callback( - channel, EDMA_DMA_COMPLETE, - edma_cc[ctlr]->intr_data[channel].data); - } - } while (sh_ipr); - - edma_shadow0_write(ctlr, SH_IEVAL, 1); - return IRQ_HANDLED; -} - -/****************************************************************************** - * - * DMA error interrupt handler - * - *****************************************************************************/ -static irqreturn_t dma_ccerr_handler(int irq, void *data) -{ - int i; - int ctlr; - unsigned int cnt = 0; - - ctlr = irq2ctlr(irq); - if (ctlr < 0) - return IRQ_NONE; - - dev_dbg(data, "dma_ccerr_handler\n"); - - if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) && - (edma_read_array(ctlr, EDMA_EMR, 1) == 0) && - (edma_read(ctlr, EDMA_QEMR) == 0) && - (edma_read(ctlr, EDMA_CCERR) == 0)) - return IRQ_NONE; - - while (1) { - int j = -1; - if (edma_read_array(ctlr, EDMA_EMR, 0)) - j = 0; - else if (edma_read_array(ctlr, EDMA_EMR, 1)) - j = 1; - if (j >= 0) { - dev_dbg(data, "EMR%d %08x\n", j, - edma_read_array(ctlr, EDMA_EMR, j)); - for (i = 0; i < 32; i++) { - int k = (j << 5) + i; - if (edma_read_array(ctlr, EDMA_EMR, j) & - BIT(i)) { - /* Clear the corresponding EMR bits */ - edma_write_array(ctlr, EDMA_EMCR, j, - BIT(i)); - /* Clear any SER */ - edma_shadow0_write_array(ctlr, SH_SECR, - j, BIT(i)); - if (edma_cc[ctlr]->intr_data[k]. - callback) { - edma_cc[ctlr]->intr_data[k]. - callback(k, - EDMA_DMA_CC_ERROR, - edma_cc[ctlr]->intr_data - [k].data); - } - } - } - } else if (edma_read(ctlr, EDMA_QEMR)) { - dev_dbg(data, "QEMR %02x\n", - edma_read(ctlr, EDMA_QEMR)); - for (i = 0; i < 8; i++) { - if (edma_read(ctlr, EDMA_QEMR) & BIT(i)) { - /* Clear the corresponding IPR bits */ - edma_write(ctlr, EDMA_QEMCR, BIT(i)); - edma_shadow0_write(ctlr, SH_QSECR, - BIT(i)); - - /* NOTE: not reported!! */ - } - } - } else if (edma_read(ctlr, EDMA_CCERR)) { - dev_dbg(data, "CCERR %08x\n", - edma_read(ctlr, EDMA_CCERR)); - /* FIXME: CCERR.BIT(16) ignored! much better - * to just write CCERRCLR with CCERR value... - */ - for (i = 0; i < 8; i++) { - if (edma_read(ctlr, EDMA_CCERR) & BIT(i)) { - /* Clear the corresponding IPR bits */ - edma_write(ctlr, EDMA_CCERRCLR, BIT(i)); - - /* NOTE: not reported!! */ - } - } - } - if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) && - (edma_read_array(ctlr, EDMA_EMR, 1) == 0) && - (edma_read(ctlr, EDMA_QEMR) == 0) && - (edma_read(ctlr, EDMA_CCERR) == 0)) - break; - cnt++; - if (cnt > 10) - break; - } - edma_write(ctlr, EDMA_EEVAL, 1); - return IRQ_HANDLED; -} - -static int reserve_contiguous_slots(int ctlr, unsigned int id, - unsigned int num_slots, - unsigned int start_slot) -{ - int i, j; - unsigned int count = num_slots; - int stop_slot = start_slot; - DECLARE_BITMAP(tmp_inuse, EDMA_MAX_PARAMENTRY); - - for (i = start_slot; i < edma_cc[ctlr]->num_slots; ++i) { - j = EDMA_CHAN_SLOT(i); - if (!test_and_set_bit(j, edma_cc[ctlr]->edma_inuse)) { - /* Record our current beginning slot */ - if (count == num_slots) - stop_slot = i; - - count--; - set_bit(j, tmp_inuse); - - if (count == 0) - break; - } else { - clear_bit(j, tmp_inuse); - - if (id == EDMA_CONT_PARAMS_FIXED_EXACT) { - stop_slot = i; - break; - } else { - count = num_slots; - } - } - } - - /* - * We have to clear any bits that we set - * if we run out parameter RAM slots, i.e we do find a set - * of contiguous parameter RAM slots but do not find the exact number - * requested as we may reach the total number of parameter RAM slots - */ - if (i == edma_cc[ctlr]->num_slots) - stop_slot = i; - - j = start_slot; - for_each_set_bit_from(j, tmp_inuse, stop_slot) - clear_bit(j, edma_cc[ctlr]->edma_inuse); - - if (count) - return -EBUSY; - - for (j = i - num_slots + 1; j <= i; ++j) - memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j), - &dummy_paramset, PARM_SIZE); - - return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1); -} - -static int prepare_unused_channel_list(struct device *dev, void *data) -{ - struct platform_device *pdev = to_platform_device(dev); - int i, count, ctlr; - struct of_phandle_args dma_spec; - - if (dev->of_node) { - count = of_property_count_strings(dev->of_node, "dma-names"); - if (count < 0) - return 0; - for (i = 0; i < count; i++) { - if (of_parse_phandle_with_args(dev->of_node, "dmas", - "#dma-cells", i, - &dma_spec)) - continue; - - if (!of_match_node(edma_of_ids, dma_spec.np)) { - of_node_put(dma_spec.np); - continue; - } - - clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]), - edma_cc[0]->edma_unused); - of_node_put(dma_spec.np); - } - return 0; - } - - /* For non-OF case */ - for (i = 0; i < pdev->num_resources; i++) { - if ((pdev->resource[i].flags & IORESOURCE_DMA) && - (int)pdev->resource[i].start >= 0) { - ctlr = EDMA_CTLR(pdev->resource[i].start); - clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start), - edma_cc[ctlr]->edma_unused); - } - } - - return 0; -} - -/*-----------------------------------------------------------------------*/ - -static bool unused_chan_list_done; - -/* Resource alloc/free: dma channels, parameter RAM slots */ - -/** - * edma_alloc_channel - allocate DMA channel and paired parameter RAM - * @channel: specific channel to allocate; negative for "any unmapped channel" - * @callback: optional; to be issued on DMA completion or errors - * @data: passed to callback - * @eventq_no: an EVENTQ_* constant, used to choose which Transfer - * Controller (TC) executes requests using this channel. Use - * EVENTQ_DEFAULT unless you really need a high priority queue. - * - * This allocates a DMA channel and its associated parameter RAM slot. - * The parameter RAM is initialized to hold a dummy transfer. - * - * Normal use is to pass a specific channel number as @channel, to make - * use of hardware events mapped to that channel. When the channel will - * be used only for software triggering or event chaining, channels not - * mapped to hardware events (or mapped to unused events) are preferable. - * - * DMA transfers start from a channel using edma_start(), or by - * chaining. When the transfer described in that channel's parameter RAM - * slot completes, that slot's data may be reloaded through a link. - * - * DMA errors are only reported to the @callback associated with the - * channel driving that transfer, but transfer completion callbacks can - * be sent to another channel under control of the TCC field in - * the option word of the transfer's parameter RAM set. Drivers must not - * use DMA transfer completion callbacks for channels they did not allocate. - * (The same applies to TCC codes used in transfer chaining.) - * - * Returns the number of the channel, else negative errno. - */ -int edma_alloc_channel(int channel, - void (*callback)(unsigned channel, u16 ch_status, void *data), - void *data, - enum dma_event_q eventq_no) -{ - unsigned i, done = 0, ctlr = 0; - int ret = 0; - - if (!unused_chan_list_done) { - /* - * Scan all the platform devices to find out the EDMA channels - * used and clear them in the unused list, making the rest - * available for ARM usage. - */ - ret = bus_for_each_dev(&platform_bus_type, NULL, NULL, - prepare_unused_channel_list); - if (ret < 0) - return ret; - - unused_chan_list_done = true; - } - - if (channel >= 0) { - ctlr = EDMA_CTLR(channel); - channel = EDMA_CHAN_SLOT(channel); - } - - if (channel < 0) { - for (i = 0; i < arch_num_cc; i++) { - channel = 0; - for (;;) { - channel = find_next_bit(edma_cc[i]->edma_unused, - edma_cc[i]->num_channels, - channel); - if (channel == edma_cc[i]->num_channels) - break; - if (!test_and_set_bit(channel, - edma_cc[i]->edma_inuse)) { - done = 1; - ctlr = i; - break; - } - channel++; - } - if (done) - break; - } - if (!done) - return -ENOMEM; - } else if (channel >= edma_cc[ctlr]->num_channels) { - return -EINVAL; - } else if (test_and_set_bit(channel, edma_cc[ctlr]->edma_inuse)) { - return -EBUSY; - } - - /* ensure access through shadow region 0 */ - edma_or_array2(ctlr, EDMA_DRAE, 0, channel >> 5, BIT(channel & 0x1f)); - - /* ensure no events are pending */ - edma_stop(EDMA_CTLR_CHAN(ctlr, channel)); - memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel), - &dummy_paramset, PARM_SIZE); - - if (callback) - setup_dma_interrupt(EDMA_CTLR_CHAN(ctlr, channel), - callback, data); - - map_dmach_queue(ctlr, channel, eventq_no); - - return EDMA_CTLR_CHAN(ctlr, channel); -} -EXPORT_SYMBOL(edma_alloc_channel); - - -/** - * edma_free_channel - deallocate DMA channel - * @channel: dma channel returned from edma_alloc_channel() - * - * This deallocates the DMA channel and associated parameter RAM slot - * allocated by edma_alloc_channel(). - * - * Callers are responsible for ensuring the channel is inactive, and - * will not be reactivated by linking, chaining, or software calls to - * edma_start(). - */ -void edma_free_channel(unsigned channel) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(channel); - channel = EDMA_CHAN_SLOT(channel); - - if (channel >= edma_cc[ctlr]->num_channels) - return; - - setup_dma_interrupt(channel, NULL, NULL); - /* REVISIT should probably take out of shadow region 0 */ - - memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel), - &dummy_paramset, PARM_SIZE); - clear_bit(channel, edma_cc[ctlr]->edma_inuse); -} -EXPORT_SYMBOL(edma_free_channel); - -/** - * edma_alloc_slot - allocate DMA parameter RAM - * @slot: specific slot to allocate; negative for "any unused slot" - * - * This allocates a parameter RAM slot, initializing it to hold a - * dummy transfer. Slots allocated using this routine have not been - * mapped to a hardware DMA channel, and will normally be used by - * linking to them from a slot associated with a DMA channel. - * - * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific - * slots may be allocated on behalf of DSP firmware. - * - * Returns the number of the slot, else negative errno. - */ -int edma_alloc_slot(unsigned ctlr, int slot) -{ - if (!edma_cc[ctlr]) - return -EINVAL; - - if (slot >= 0) - slot = EDMA_CHAN_SLOT(slot); - - if (slot < 0) { - slot = edma_cc[ctlr]->num_channels; - for (;;) { - slot = find_next_zero_bit(edma_cc[ctlr]->edma_inuse, - edma_cc[ctlr]->num_slots, slot); - if (slot == edma_cc[ctlr]->num_slots) - return -ENOMEM; - if (!test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse)) - break; - } - } else if (slot < edma_cc[ctlr]->num_channels || - slot >= edma_cc[ctlr]->num_slots) { - return -EINVAL; - } else if (test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse)) { - return -EBUSY; - } - - memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), - &dummy_paramset, PARM_SIZE); - - return EDMA_CTLR_CHAN(ctlr, slot); -} -EXPORT_SYMBOL(edma_alloc_slot); - -/** - * edma_free_slot - deallocate DMA parameter RAM - * @slot: parameter RAM slot returned from edma_alloc_slot() - * - * This deallocates the parameter RAM slot allocated by edma_alloc_slot(). - * Callers are responsible for ensuring the slot is inactive, and will - * not be activated. - */ -void edma_free_slot(unsigned slot) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(slot); - slot = EDMA_CHAN_SLOT(slot); - - if (slot < edma_cc[ctlr]->num_channels || - slot >= edma_cc[ctlr]->num_slots) - return; - - memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), - &dummy_paramset, PARM_SIZE); - clear_bit(slot, edma_cc[ctlr]->edma_inuse); -} -EXPORT_SYMBOL(edma_free_slot); - - -/** - * edma_alloc_cont_slots- alloc contiguous parameter RAM slots - * The API will return the starting point of a set of - * contiguous parameter RAM slots that have been requested - * - * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT - * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT - * @count: number of contiguous Paramter RAM slots - * @slot - the start value of Parameter RAM slot that should be passed if id - * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT - * - * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of - * contiguous Parameter RAM slots from parameter RAM 64 in the case of - * DaVinci SOCs and 32 in the case of DA8xx SOCs. - * - * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a - * set of contiguous parameter RAM slots from the "slot" that is passed as an - * argument to the API. - * - * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries - * starts looking for a set of contiguous parameter RAMs from the "slot" - * that is passed as an argument to the API. On failure the API will try to - * find a set of contiguous Parameter RAM slots from the remaining Parameter - * RAM slots - */ -int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count) -{ - /* - * The start slot requested should be greater than - * the number of channels and lesser than the total number - * of slots - */ - if ((id != EDMA_CONT_PARAMS_ANY) && - (slot < edma_cc[ctlr]->num_channels || - slot >= edma_cc[ctlr]->num_slots)) - return -EINVAL; - - /* - * The number of parameter RAM slots requested cannot be less than 1 - * and cannot be more than the number of slots minus the number of - * channels - */ - if (count < 1 || count > - (edma_cc[ctlr]->num_slots - edma_cc[ctlr]->num_channels)) - return -EINVAL; - - switch (id) { - case EDMA_CONT_PARAMS_ANY: - return reserve_contiguous_slots(ctlr, id, count, - edma_cc[ctlr]->num_channels); - case EDMA_CONT_PARAMS_FIXED_EXACT: - case EDMA_CONT_PARAMS_FIXED_NOT_EXACT: - return reserve_contiguous_slots(ctlr, id, count, slot); - default: - return -EINVAL; - } - -} -EXPORT_SYMBOL(edma_alloc_cont_slots); - -/** - * edma_free_cont_slots - deallocate DMA parameter RAM slots - * @slot: first parameter RAM of a set of parameter RAM slots to be freed - * @count: the number of contiguous parameter RAM slots to be freed - * - * This deallocates the parameter RAM slots allocated by - * edma_alloc_cont_slots. - * Callers/applications need to keep track of sets of contiguous - * parameter RAM slots that have been allocated using the edma_alloc_cont_slots - * API. - * Callers are responsible for ensuring the slots are inactive, and will - * not be activated. - */ -int edma_free_cont_slots(unsigned slot, int count) -{ - unsigned ctlr, slot_to_free; - int i; - - ctlr = EDMA_CTLR(slot); - slot = EDMA_CHAN_SLOT(slot); - - if (slot < edma_cc[ctlr]->num_channels || - slot >= edma_cc[ctlr]->num_slots || - count < 1) - return -EINVAL; - - for (i = slot; i < slot + count; ++i) { - ctlr = EDMA_CTLR(i); - slot_to_free = EDMA_CHAN_SLOT(i); - - memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot_to_free), - &dummy_paramset, PARM_SIZE); - clear_bit(slot_to_free, edma_cc[ctlr]->edma_inuse); - } - - return 0; -} -EXPORT_SYMBOL(edma_free_cont_slots); - -/*-----------------------------------------------------------------------*/ - -/* Parameter RAM operations (i) -- read/write partial slots */ - -/** - * edma_set_src - set initial DMA source address in parameter RAM slot - * @slot: parameter RAM slot being configured - * @src_port: physical address of source (memory, controller FIFO, etc) - * @addressMode: INCR, except in very rare cases - * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the - * width to use when addressing the fifo (e.g. W8BIT, W32BIT) - * - * Note that the source address is modified during the DMA transfer - * according to edma_set_src_index(). - */ -void edma_set_src(unsigned slot, dma_addr_t src_port, - enum address_mode mode, enum fifo_width width) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(slot); - slot = EDMA_CHAN_SLOT(slot); - - if (slot < edma_cc[ctlr]->num_slots) { - unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot); - - if (mode) { - /* set SAM and program FWID */ - i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8)); - } else { - /* clear SAM */ - i &= ~SAM; - } - edma_parm_write(ctlr, PARM_OPT, slot, i); - - /* set the source port address - in source register of param structure */ - edma_parm_write(ctlr, PARM_SRC, slot, src_port); - } -} -EXPORT_SYMBOL(edma_set_src); - -/** - * edma_set_dest - set initial DMA destination address in parameter RAM slot - * @slot: parameter RAM slot being configured - * @dest_port: physical address of destination (memory, controller FIFO, etc) - * @addressMode: INCR, except in very rare cases - * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the - * width to use when addressing the fifo (e.g. W8BIT, W32BIT) - * - * Note that the destination address is modified during the DMA transfer - * according to edma_set_dest_index(). - */ -void edma_set_dest(unsigned slot, dma_addr_t dest_port, - enum address_mode mode, enum fifo_width width) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(slot); - slot = EDMA_CHAN_SLOT(slot); - - if (slot < edma_cc[ctlr]->num_slots) { - unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot); - - if (mode) { - /* set DAM and program FWID */ - i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8)); - } else { - /* clear DAM */ - i &= ~DAM; - } - edma_parm_write(ctlr, PARM_OPT, slot, i); - /* set the destination port address - in dest register of param structure */ - edma_parm_write(ctlr, PARM_DST, slot, dest_port); - } -} -EXPORT_SYMBOL(edma_set_dest); - -/** - * edma_get_position - returns the current transfer point - * @slot: parameter RAM slot being examined - * @dst: true selects the dest position, false the source - * - * Returns the position of the current active slot - */ -dma_addr_t edma_get_position(unsigned slot, bool dst) -{ - u32 offs, ctlr = EDMA_CTLR(slot); - - slot = EDMA_CHAN_SLOT(slot); - - offs = PARM_OFFSET(slot); - offs += dst ? PARM_DST : PARM_SRC; - - return edma_read(ctlr, offs); -} - -/** - * edma_set_src_index - configure DMA source address indexing - * @slot: parameter RAM slot being configured - * @src_bidx: byte offset between source arrays in a frame - * @src_cidx: byte offset between source frames in a block - * - * Offsets are specified to support either contiguous or discontiguous - * memory transfers, or repeated access to a hardware register, as needed. - * When accessing hardware registers, both offsets are normally zero. - */ -void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(slot); - slot = EDMA_CHAN_SLOT(slot); - - if (slot < edma_cc[ctlr]->num_slots) { - edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot, - 0xffff0000, src_bidx); - edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot, - 0xffff0000, src_cidx); - } -} -EXPORT_SYMBOL(edma_set_src_index); - -/** - * edma_set_dest_index - configure DMA destination address indexing - * @slot: parameter RAM slot being configured - * @dest_bidx: byte offset between destination arrays in a frame - * @dest_cidx: byte offset between destination frames in a block - * - * Offsets are specified to support either contiguous or discontiguous - * memory transfers, or repeated access to a hardware register, as needed. - * When accessing hardware registers, both offsets are normally zero. - */ -void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(slot); - slot = EDMA_CHAN_SLOT(slot); - - if (slot < edma_cc[ctlr]->num_slots) { - edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot, - 0x0000ffff, dest_bidx << 16); - edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot, - 0x0000ffff, dest_cidx << 16); - } -} -EXPORT_SYMBOL(edma_set_dest_index); - -/** - * edma_set_transfer_params - configure DMA transfer parameters - * @slot: parameter RAM slot being configured - * @acnt: how many bytes per array (at least one) - * @bcnt: how many arrays per frame (at least one) - * @ccnt: how many frames per block (at least one) - * @bcnt_rld: used only for A-Synchronized transfers; this specifies - * the value to reload into bcnt when it decrements to zero - * @sync_mode: ASYNC or ABSYNC - * - * See the EDMA3 documentation to understand how to configure and link - * transfers using the fields in PaRAM slots. If you are not doing it - * all at once with edma_write_slot(), you will use this routine - * plus two calls each for source and destination, setting the initial - * address and saying how to index that address. - * - * An example of an A-Synchronized transfer is a serial link using a - * single word shift register. In that case, @acnt would be equal to - * that word size; the serial controller issues a DMA synchronization - * event to transfer each word, and memory access by the DMA transfer - * controller will be word-at-a-time. - * - * An example of an AB-Synchronized transfer is a device using a FIFO. - * In that case, @acnt equals the FIFO width and @bcnt equals its depth. - * The controller with the FIFO issues DMA synchronization events when - * the FIFO threshold is reached, and the DMA transfer controller will - * transfer one frame to (or from) the FIFO. It will probably use - * efficient burst modes to access memory. - */ -void edma_set_transfer_params(unsigned slot, - u16 acnt, u16 bcnt, u16 ccnt, - u16 bcnt_rld, enum sync_dimension sync_mode) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(slot); - slot = EDMA_CHAN_SLOT(slot); - - if (slot < edma_cc[ctlr]->num_slots) { - edma_parm_modify(ctlr, PARM_LINK_BCNTRLD, slot, - 0x0000ffff, bcnt_rld << 16); - if (sync_mode == ASYNC) - edma_parm_and(ctlr, PARM_OPT, slot, ~SYNCDIM); - else - edma_parm_or(ctlr, PARM_OPT, slot, SYNCDIM); - /* Set the acount, bcount, ccount registers */ - edma_parm_write(ctlr, PARM_A_B_CNT, slot, (bcnt << 16) | acnt); - edma_parm_write(ctlr, PARM_CCNT, slot, ccnt); - } -} -EXPORT_SYMBOL(edma_set_transfer_params); - -/** - * edma_link - link one parameter RAM slot to another - * @from: parameter RAM slot originating the link - * @to: parameter RAM slot which is the link target - * - * The originating slot should not be part of any active DMA transfer. - */ -void edma_link(unsigned from, unsigned to) -{ - unsigned ctlr_from, ctlr_to; - - ctlr_from = EDMA_CTLR(from); - from = EDMA_CHAN_SLOT(from); - ctlr_to = EDMA_CTLR(to); - to = EDMA_CHAN_SLOT(to); - - if (from >= edma_cc[ctlr_from]->num_slots) - return; - if (to >= edma_cc[ctlr_to]->num_slots) - return; - edma_parm_modify(ctlr_from, PARM_LINK_BCNTRLD, from, 0xffff0000, - PARM_OFFSET(to)); -} -EXPORT_SYMBOL(edma_link); - -/** - * edma_unlink - cut link from one parameter RAM slot - * @from: parameter RAM slot originating the link - * - * The originating slot should not be part of any active DMA transfer. - * Its link is set to 0xffff. - */ -void edma_unlink(unsigned from) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(from); - from = EDMA_CHAN_SLOT(from); - - if (from >= edma_cc[ctlr]->num_slots) - return; - edma_parm_or(ctlr, PARM_LINK_BCNTRLD, from, 0xffff); -} -EXPORT_SYMBOL(edma_unlink); - -/*-----------------------------------------------------------------------*/ - -/* Parameter RAM operations (ii) -- read/write whole parameter sets */ - -/** - * edma_write_slot - write parameter RAM data for slot - * @slot: number of parameter RAM slot being modified - * @param: data to be written into parameter RAM slot - * - * Use this to assign all parameters of a transfer at once. This - * allows more efficient setup of transfers than issuing multiple - * calls to set up those parameters in small pieces, and provides - * complete control over all transfer options. - */ -void edma_write_slot(unsigned slot, const struct edmacc_param *param) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(slot); - slot = EDMA_CHAN_SLOT(slot); - - if (slot >= edma_cc[ctlr]->num_slots) - return; - memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), param, - PARM_SIZE); -} -EXPORT_SYMBOL(edma_write_slot); - -/** - * edma_read_slot - read parameter RAM data from slot - * @slot: number of parameter RAM slot being copied - * @param: where to store copy of parameter RAM data - * - * Use this to read data from a parameter RAM slot, perhaps to - * save them as a template for later reuse. - */ -void edma_read_slot(unsigned slot, struct edmacc_param *param) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(slot); - slot = EDMA_CHAN_SLOT(slot); - - if (slot >= edma_cc[ctlr]->num_slots) - return; - memcpy_fromio(param, edmacc_regs_base[ctlr] + PARM_OFFSET(slot), - PARM_SIZE); -} -EXPORT_SYMBOL(edma_read_slot); - -/*-----------------------------------------------------------------------*/ - -/* Various EDMA channel control operations */ - -/** - * edma_pause - pause dma on a channel - * @channel: on which edma_start() has been called - * - * This temporarily disables EDMA hardware events on the specified channel, - * preventing them from triggering new transfers on its behalf - */ -void edma_pause(unsigned channel) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(channel); - channel = EDMA_CHAN_SLOT(channel); - - if (channel < edma_cc[ctlr]->num_channels) { - unsigned int mask = BIT(channel & 0x1f); - - edma_shadow0_write_array(ctlr, SH_EECR, channel >> 5, mask); - } -} -EXPORT_SYMBOL(edma_pause); - -/** - * edma_resume - resumes dma on a paused channel - * @channel: on which edma_pause() has been called - * - * This re-enables EDMA hardware events on the specified channel. - */ -void edma_resume(unsigned channel) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(channel); - channel = EDMA_CHAN_SLOT(channel); - - if (channel < edma_cc[ctlr]->num_channels) { - unsigned int mask = BIT(channel & 0x1f); - - edma_shadow0_write_array(ctlr, SH_EESR, channel >> 5, mask); - } -} -EXPORT_SYMBOL(edma_resume); - -int edma_trigger_channel(unsigned channel) -{ - unsigned ctlr; - unsigned int mask; - - ctlr = EDMA_CTLR(channel); - channel = EDMA_CHAN_SLOT(channel); - mask = BIT(channel & 0x1f); - - edma_shadow0_write_array(ctlr, SH_ESR, (channel >> 5), mask); - - pr_debug("EDMA: ESR%d %08x\n", (channel >> 5), - edma_shadow0_read_array(ctlr, SH_ESR, (channel >> 5))); - return 0; -} -EXPORT_SYMBOL(edma_trigger_channel); - -/** - * edma_start - start dma on a channel - * @channel: channel being activated - * - * Channels with event associations will be triggered by their hardware - * events, and channels without such associations will be triggered by - * software. (At this writing there is no interface for using software - * triggers except with channels that don't support hardware triggers.) - * - * Returns zero on success, else negative errno. - */ -int edma_start(unsigned channel) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(channel); - channel = EDMA_CHAN_SLOT(channel); - - if (channel < edma_cc[ctlr]->num_channels) { - int j = channel >> 5; - unsigned int mask = BIT(channel & 0x1f); - - /* EDMA channels without event association */ - if (test_bit(channel, edma_cc[ctlr]->edma_unused)) { - pr_debug("EDMA: ESR%d %08x\n", j, - edma_shadow0_read_array(ctlr, SH_ESR, j)); - edma_shadow0_write_array(ctlr, SH_ESR, j, mask); - return 0; - } - - /* EDMA channel with event association */ - pr_debug("EDMA: ER%d %08x\n", j, - edma_shadow0_read_array(ctlr, SH_ER, j)); - /* Clear any pending event or error */ - edma_write_array(ctlr, EDMA_ECR, j, mask); - edma_write_array(ctlr, EDMA_EMCR, j, mask); - /* Clear any SER */ - edma_shadow0_write_array(ctlr, SH_SECR, j, mask); - edma_shadow0_write_array(ctlr, SH_EESR, j, mask); - pr_debug("EDMA: EER%d %08x\n", j, - edma_shadow0_read_array(ctlr, SH_EER, j)); - return 0; - } - - return -EINVAL; -} -EXPORT_SYMBOL(edma_start); - -/** - * edma_stop - stops dma on the channel passed - * @channel: channel being deactivated - * - * When @lch is a channel, any active transfer is paused and - * all pending hardware events are cleared. The current transfer - * may not be resumed, and the channel's Parameter RAM should be - * reinitialized before being reused. - */ -void edma_stop(unsigned channel) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(channel); - channel = EDMA_CHAN_SLOT(channel); - - if (channel < edma_cc[ctlr]->num_channels) { - int j = channel >> 5; - unsigned int mask = BIT(channel & 0x1f); - - edma_shadow0_write_array(ctlr, SH_EECR, j, mask); - edma_shadow0_write_array(ctlr, SH_ECR, j, mask); - edma_shadow0_write_array(ctlr, SH_SECR, j, mask); - edma_write_array(ctlr, EDMA_EMCR, j, mask); - - /* clear possibly pending completion interrupt */ - edma_shadow0_write_array(ctlr, SH_ICR, j, mask); - - pr_debug("EDMA: EER%d %08x\n", j, - edma_shadow0_read_array(ctlr, SH_EER, j)); - - /* REVISIT: consider guarding against inappropriate event - * chaining by overwriting with dummy_paramset. - */ - } -} -EXPORT_SYMBOL(edma_stop); - -/****************************************************************************** - * - * It cleans ParamEntry qand bring back EDMA to initial state if media has - * been removed before EDMA has finished.It is usedful for removable media. - * Arguments: - * ch_no - channel no - * - * Return: zero on success, or corresponding error no on failure - * - * FIXME this should not be needed ... edma_stop() should suffice. - * - *****************************************************************************/ - -void edma_clean_channel(unsigned channel) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(channel); - channel = EDMA_CHAN_SLOT(channel); - - if (channel < edma_cc[ctlr]->num_channels) { - int j = (channel >> 5); - unsigned int mask = BIT(channel & 0x1f); - - pr_debug("EDMA: EMR%d %08x\n", j, - edma_read_array(ctlr, EDMA_EMR, j)); - edma_shadow0_write_array(ctlr, SH_ECR, j, mask); - /* Clear the corresponding EMR bits */ - edma_write_array(ctlr, EDMA_EMCR, j, mask); - /* Clear any SER */ - edma_shadow0_write_array(ctlr, SH_SECR, j, mask); - edma_write(ctlr, EDMA_CCERRCLR, BIT(16) | BIT(1) | BIT(0)); - } -} -EXPORT_SYMBOL(edma_clean_channel); - -/* - * edma_clear_event - clear an outstanding event on the DMA channel - * Arguments: - * channel - channel number - */ -void edma_clear_event(unsigned channel) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(channel); - channel = EDMA_CHAN_SLOT(channel); - - if (channel >= edma_cc[ctlr]->num_channels) - return; - if (channel < 32) - edma_write(ctlr, EDMA_ECR, BIT(channel)); - else - edma_write(ctlr, EDMA_ECRH, BIT(channel - 32)); -} -EXPORT_SYMBOL(edma_clear_event); - -/* - * edma_assign_channel_eventq - move given channel to desired eventq - * Arguments: - * channel - channel number - * eventq_no - queue to move the channel - * - * Can be used to move a channel to a selected event queue. - */ -void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(channel); - channel = EDMA_CHAN_SLOT(channel); - - if (channel >= edma_cc[ctlr]->num_channels) - return; - - /* default to low priority queue */ - if (eventq_no == EVENTQ_DEFAULT) - eventq_no = edma_cc[ctlr]->default_queue; - if (eventq_no >= edma_cc[ctlr]->num_tc) - return; - - map_dmach_queue(ctlr, channel, eventq_no); -} -EXPORT_SYMBOL(edma_assign_channel_eventq); - -static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata, - struct edma *edma_cc, int cc_id) -{ - int i; - u32 value, cccfg; - s8 (*queue_priority_map)[2]; - - /* Decode the eDMA3 configuration from CCCFG register */ - cccfg = edma_read(cc_id, EDMA_CCCFG); - - value = GET_NUM_REGN(cccfg); - edma_cc->num_region = BIT(value); - - value = GET_NUM_DMACH(cccfg); - edma_cc->num_channels = BIT(value + 1); - - value = GET_NUM_PAENTRY(cccfg); - edma_cc->num_slots = BIT(value + 4); - - value = GET_NUM_EVQUE(cccfg); - edma_cc->num_tc = value + 1; - - dev_dbg(dev, "eDMA3 CC%d HW configuration (cccfg: 0x%08x):\n", cc_id, - cccfg); - dev_dbg(dev, "num_region: %u\n", edma_cc->num_region); - dev_dbg(dev, "num_channel: %u\n", edma_cc->num_channels); - dev_dbg(dev, "num_slot: %u\n", edma_cc->num_slots); - dev_dbg(dev, "num_tc: %u\n", edma_cc->num_tc); - - /* Nothing need to be done if queue priority is provided */ - if (pdata->queue_priority_mapping) - return 0; - - /* - * Configure TC/queue priority as follows: - * Q0 - priority 0 - * Q1 - priority 1 - * Q2 - priority 2 - * ... - * The meaning of priority numbers: 0 highest priority, 7 lowest - * priority. So Q0 is the highest priority queue and the last queue has - * the lowest priority. - */ - queue_priority_map = devm_kzalloc(dev, - (edma_cc->num_tc + 1) * sizeof(s8), - GFP_KERNEL); - if (!queue_priority_map) - return -ENOMEM; - - for (i = 0; i < edma_cc->num_tc; i++) { - queue_priority_map[i][0] = i; - queue_priority_map[i][1] = i; - } - queue_priority_map[i][0] = -1; - queue_priority_map[i][1] = -1; - - pdata->queue_priority_mapping = queue_priority_map; - /* Default queue has the lowest priority */ - pdata->default_queue = i - 1; - - return 0; -} - -#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES) - -static int edma_xbar_event_map(struct device *dev, struct device_node *node, - struct edma_soc_info *pdata, size_t sz) -{ - const char pname[] = "ti,edma-xbar-event-map"; - struct resource res; - void __iomem *xbar; - s16 (*xbar_chans)[2]; - size_t nelm = sz / sizeof(s16); - u32 shift, offset, mux; - int ret, i; - - xbar_chans = devm_kzalloc(dev, (nelm + 2) * sizeof(s16), GFP_KERNEL); - if (!xbar_chans) - return -ENOMEM; - - ret = of_address_to_resource(node, 1, &res); - if (ret) - return -ENOMEM; - - xbar = devm_ioremap(dev, res.start, resource_size(&res)); - if (!xbar) - return -ENOMEM; - - ret = of_property_read_u16_array(node, pname, (u16 *)xbar_chans, nelm); - if (ret) - return -EIO; - - /* Invalidate last entry for the other user of this mess */ - nelm >>= 1; - xbar_chans[nelm][0] = xbar_chans[nelm][1] = -1; - - for (i = 0; i < nelm; i++) { - shift = (xbar_chans[i][1] & 0x03) << 3; - offset = xbar_chans[i][1] & 0xfffffffc; - mux = readl(xbar + offset); - mux &= ~(0xff << shift); - mux |= xbar_chans[i][0] << shift; - writel(mux, (xbar + offset)); - } - - pdata->xbar_chans = (const s16 (*)[2]) xbar_chans; - return 0; -} - -static int edma_of_parse_dt(struct device *dev, - struct device_node *node, - struct edma_soc_info *pdata) -{ - int ret = 0; - struct property *prop; - size_t sz; - struct edma_rsv_info *rsv_info; - - rsv_info = devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL); - if (!rsv_info) - return -ENOMEM; - pdata->rsv = rsv_info; - - prop = of_find_property(node, "ti,edma-xbar-event-map", &sz); - if (prop) - ret = edma_xbar_event_map(dev, node, pdata, sz); - - return ret; -} - -static struct of_dma_filter_info edma_filter_info = { - .filter_fn = edma_filter_fn, -}; - -static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev, - struct device_node *node) -{ - struct edma_soc_info *info; - int ret; - - info = devm_kzalloc(dev, sizeof(struct edma_soc_info), GFP_KERNEL); - if (!info) - return ERR_PTR(-ENOMEM); - - ret = edma_of_parse_dt(dev, node, info); - if (ret) - return ERR_PTR(ret); - - dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap); - dma_cap_set(DMA_CYCLIC, edma_filter_info.dma_cap); - of_dma_controller_register(dev->of_node, of_dma_simple_xlate, - &edma_filter_info); - - return info; -} -#else -static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev, - struct device_node *node) -{ - return ERR_PTR(-ENOSYS); -} -#endif - -static int edma_probe(struct platform_device *pdev) -{ - struct edma_soc_info **info = pdev->dev.platform_data; - struct edma_soc_info *ninfo[EDMA_MAX_CC] = {NULL}; - s8 (*queue_priority_mapping)[2]; - int i, j, off, ln, found = 0; - int status = -1; - const s16 (*rsv_chans)[2]; - const s16 (*rsv_slots)[2]; - const s16 (*xbar_chans)[2]; - int irq[EDMA_MAX_CC] = {0, 0}; - int err_irq[EDMA_MAX_CC] = {0, 0}; - struct resource *r[EDMA_MAX_CC] = {NULL}; - struct resource res[EDMA_MAX_CC]; - char res_name[10]; - struct device_node *node = pdev->dev.of_node; - struct device *dev = &pdev->dev; - int ret; - struct platform_device_info edma_dev_info = { - .name = "edma-dma-engine", - .dma_mask = DMA_BIT_MASK(32), - .parent = &pdev->dev, - }; - - if (node) { - /* Check if this is a second instance registered */ - if (arch_num_cc) { - dev_err(dev, "only one EDMA instance is supported via DT\n"); - return -ENODEV; - } - - ninfo[0] = edma_setup_info_from_dt(dev, node); - if (IS_ERR(ninfo[0])) { - dev_err(dev, "failed to get DT data\n"); - return PTR_ERR(ninfo[0]); - } - - info = ninfo; - } - - if (!info) - return -ENODEV; - - pm_runtime_enable(dev); - ret = pm_runtime_get_sync(dev); - if (ret < 0) { - dev_err(dev, "pm_runtime_get_sync() failed\n"); - return ret; - } - - for (j = 0; j < EDMA_MAX_CC; j++) { - if (!info[j]) { - if (!found) - return -ENODEV; - break; - } - if (node) { - ret = of_address_to_resource(node, j, &res[j]); - if (!ret) - r[j] = &res[j]; - } else { - sprintf(res_name, "edma_cc%d", j); - r[j] = platform_get_resource_byname(pdev, - IORESOURCE_MEM, - res_name); - } - if (!r[j]) { - if (found) - break; - else - return -ENODEV; - } else { - found = 1; - } - - edmacc_regs_base[j] = devm_ioremap_resource(&pdev->dev, r[j]); - if (IS_ERR(edmacc_regs_base[j])) - return PTR_ERR(edmacc_regs_base[j]); - - edma_cc[j] = devm_kzalloc(&pdev->dev, sizeof(struct edma), - GFP_KERNEL); - if (!edma_cc[j]) - return -ENOMEM; - - /* Get eDMA3 configuration from IP */ - ret = edma_setup_from_hw(dev, info[j], edma_cc[j], j); - if (ret) - return ret; - - edma_cc[j]->default_queue = info[j]->default_queue; - - dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", - edmacc_regs_base[j]); - - for (i = 0; i < edma_cc[j]->num_slots; i++) - memcpy_toio(edmacc_regs_base[j] + PARM_OFFSET(i), - &dummy_paramset, PARM_SIZE); - - /* Mark all channels as unused */ - memset(edma_cc[j]->edma_unused, 0xff, - sizeof(edma_cc[j]->edma_unused)); - - if (info[j]->rsv) { - - /* Clear the reserved channels in unused list */ - rsv_chans = info[j]->rsv->rsv_chans; - if (rsv_chans) { - for (i = 0; rsv_chans[i][0] != -1; i++) { - off = rsv_chans[i][0]; - ln = rsv_chans[i][1]; - clear_bits(off, ln, - edma_cc[j]->edma_unused); - } - } - - /* Set the reserved slots in inuse list */ - rsv_slots = info[j]->rsv->rsv_slots; - if (rsv_slots) { - for (i = 0; rsv_slots[i][0] != -1; i++) { - off = rsv_slots[i][0]; - ln = rsv_slots[i][1]; - set_bits(off, ln, - edma_cc[j]->edma_inuse); - } - } - } - - /* Clear the xbar mapped channels in unused list */ - xbar_chans = info[j]->xbar_chans; - if (xbar_chans) { - for (i = 0; xbar_chans[i][1] != -1; i++) { - off = xbar_chans[i][1]; - clear_bits(off, 1, - edma_cc[j]->edma_unused); - } - } - - if (node) { - irq[j] = irq_of_parse_and_map(node, 0); - err_irq[j] = irq_of_parse_and_map(node, 2); - } else { - char irq_name[10]; - - sprintf(irq_name, "edma%d", j); - irq[j] = platform_get_irq_byname(pdev, irq_name); - - sprintf(irq_name, "edma%d_err", j); - err_irq[j] = platform_get_irq_byname(pdev, irq_name); - } - edma_cc[j]->irq_res_start = irq[j]; - edma_cc[j]->irq_res_end = err_irq[j]; - - status = devm_request_irq(dev, irq[j], dma_irq_handler, 0, - "edma", dev); - if (status < 0) { - dev_dbg(&pdev->dev, - "devm_request_irq %d failed --> %d\n", - irq[j], status); - return status; - } - - status = devm_request_irq(dev, err_irq[j], dma_ccerr_handler, 0, - "edma_error", dev); - if (status < 0) { - dev_dbg(&pdev->dev, - "devm_request_irq %d failed --> %d\n", - err_irq[j], status); - return status; - } - - for (i = 0; i < edma_cc[j]->num_channels; i++) - map_dmach_queue(j, i, info[j]->default_queue); - - queue_priority_mapping = info[j]->queue_priority_mapping; - - /* Event queue priority mapping */ - for (i = 0; queue_priority_mapping[i][0] != -1; i++) - assign_priority_to_queue(j, - queue_priority_mapping[i][0], - queue_priority_mapping[i][1]); - - /* Map the channel to param entry if channel mapping logic - * exist - */ - if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST) - map_dmach_param(j); - - for (i = 0; i < edma_cc[j]->num_region; i++) { - edma_write_array2(j, EDMA_DRAE, i, 0, 0x0); - edma_write_array2(j, EDMA_DRAE, i, 1, 0x0); - edma_write_array(j, EDMA_QRAE, i, 0x0); - } - edma_cc[j]->info = info[j]; - arch_num_cc++; - - edma_dev_info.id = j; - platform_device_register_full(&edma_dev_info); - } - - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int edma_pm_resume(struct device *dev) -{ - int i, j; - - for (j = 0; j < arch_num_cc; j++) { - struct edma *cc = edma_cc[j]; - - s8 (*queue_priority_mapping)[2]; - - queue_priority_mapping = cc->info->queue_priority_mapping; - - /* Event queue priority mapping */ - for (i = 0; queue_priority_mapping[i][0] != -1; i++) - assign_priority_to_queue(j, - queue_priority_mapping[i][0], - queue_priority_mapping[i][1]); - - /* - * Map the channel to param entry if channel mapping logic - * exist - */ - if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST) - map_dmach_param(j); - - for (i = 0; i < cc->num_channels; i++) { - if (test_bit(i, cc->edma_inuse)) { - /* ensure access through shadow region 0 */ - edma_or_array2(j, EDMA_DRAE, 0, i >> 5, - BIT(i & 0x1f)); - - setup_dma_interrupt(i, - cc->intr_data[i].callback, - cc->intr_data[i].data); - } - } - } - - return 0; -} -#endif - -static const struct dev_pm_ops edma_pm_ops = { - SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, edma_pm_resume) -}; - -static struct platform_driver edma_driver = { - .driver = { - .name = "edma", - .pm = &edma_pm_ops, - .of_match_table = edma_of_ids, - }, - .probe = edma_probe, -}; - -static int __init edma_init(void) -{ - return platform_driver_probe(&edma_driver, edma_probe); -} -arch_initcall(edma_init); - diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig deleted file mode 100644 index 3125e00f05ab..000000000000 --- a/arch/arm/configs/bockw_defconfig +++ /dev/null @@ -1,133 +0,0 @@ -# CONFIG_ARM_PATCH_PHYS_VIRT is not set -CONFIG_KERNEL_LZMA=y -CONFIG_NO_HZ=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_SYSCTL_SYSCALL=y -CONFIG_EMBEDDED=y -CONFIG_SLAB=y -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE_LEGACY=y -CONFIG_ARCH_R8A7778=y -CONFIG_MACH_BOCKW=y -CONFIG_MEMORY_START=0x60000000 -CONFIG_MEMORY_SIZE=0x10000000 -CONFIG_SHMOBILE_TIMER_HZ=1024 -# CONFIG_SH_TIMER_CMT is not set -# CONFIG_EM_TIMER_STI is not set -CONFIG_ARM_ERRATA_430973=y -CONFIG_ARM_ERRATA_458693=y -CONFIG_ARM_ERRATA_460075=y -CONFIG_ARM_ERRATA_743622=y -CONFIG_ARM_ERRATA_754322=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_HIGHMEM=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_VFP=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_SPI_NOR=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -# CONFIG_NET_CADENCE is not set -# CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CIRRUS is not set -# CONFIG_NET_VENDOR_FARADAY is not set -# CONFIG_NET_VENDOR_INTEL is not set -# CONFIG_NET_VENDOR_MARVELL is not set -# CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_NATSEMI is not set -# CONFIG_NET_VENDOR_SEEQ is not set -CONFIG_SMSC911X=y -# CONFIG_NET_VENDOR_STMICRO is not set -# CONFIG_NET_VENDOR_WIZNET is not set -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=6 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -CONFIG_I2C=y -CONFIG_I2C_RCAR=y -CONFIG_GPIO_RCAR=y -CONFIG_REGULATOR=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_SOC_CAMERA=y -CONFIG_VIDEO_RCAR_VIN=y -# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set -CONFIG_VIDEO_ML86V7667=y -CONFIG_SPI=y -CONFIG_SPI_SH_HSPI=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_SOC=y -CONFIG_SND_SOC_RCAR=y -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PLATFORM=y -CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_STORAGE=y -CONFIG_USB_RCAR_PHY=y -CONFIG_MMC=y -CONFIG_MMC_SDHI=y -CONFIG_MMC_SH_MMCIF=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_RX8581=y -CONFIG_DMADEVICES=y -CONFIG_RCAR_HPB_DMAE=y -CONFIG_UIO=y -CONFIG_UIO_PDRV_GENIRQ=y -# CONFIG_IOMMU_SUPPORT is not set -# CONFIG_DNOTIFY is not set -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFS_SWAP=y -CONFIG_NFS_V4_1=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_FTRACE is not set -# CONFIG_ARM_UNWIND is not set -CONFIG_AVERAGE=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 1ff2bfa2e183..0ff608fd7f0f 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -132,6 +132,7 @@ CONFIG_DRM_PARADE_PS8622=y CONFIG_DRM_EXYNOS=y CONFIG_DRM_EXYNOS_FIMD=y CONFIG_DRM_EXYNOS_DSI=y +CONFIG_DRM_EXYNOS_MIXER=y CONFIG_DRM_EXYNOS_HDMI=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y @@ -166,7 +167,6 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_S3C=y CONFIG_MMC_SDHCI_S3C_DMA=y CONFIG_MMC_DW=y -CONFIG_MMC_DW_IDMAC=y CONFIG_MMC_DW_EXYNOS=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MAX77686=y diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig index 5997dbc69822..b2e340b272ee 100644 --- a/arch/arm/configs/hisi_defconfig +++ b/arch/arm/configs/hisi_defconfig @@ -69,7 +69,6 @@ CONFIG_NOP_USB_XCEIV=y CONFIG_MMC=y CONFIG_RTC_CLASS=y CONFIG_MMC_DW=y -CONFIG_MMC_DW_IDMAC=y CONFIG_MMC_DW_PLTFM=y CONFIG_RTC_DRV_PL031=y CONFIG_DMADEVICES=y diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig index 1c47f86c3970..b7e8cdab51f9 100644 --- a/arch/arm/configs/lpc18xx_defconfig +++ b/arch/arm/configs/lpc18xx_defconfig @@ -119,7 +119,6 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_MMC=y CONFIG_MMC_DW=y -CONFIG_MMC_DW_IDMAC=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_PCA9532=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 3f15a5cae167..c5e1943e5427 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -246,7 +246,7 @@ CONFIG_GPIO_TWL4030=y CONFIG_GPIO_PALMAS=y CONFIG_W1=m CONFIG_HDQ_MASTER_OMAP=m -CONFIG_BATTERY_BQ27x00=m +CONFIG_BATTERY_BQ27XXX=m CONFIG_CHARGER_ISP1704=m CONFIG_CHARGER_TWL4030=m CONFIG_CHARGER_BQ2415X=m diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index be648eb47cd9..bd425302c97a 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -14,6 +14,7 @@ generic-y += local.h generic-y += local64.h generic-y += mm-arch-hooks.h generic-y += msgbuf.h +generic-y += msi.h generic-y += param.h generic-y += parport.h generic-y += poll.h diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h new file mode 100644 index 000000000000..6607d976e07d --- /dev/null +++ b/arch/arm/include/asm/arch_gicv3.h @@ -0,0 +1,188 @@ +/* + * arch/arm/include/asm/arch_gicv3.h + * + * Copyright (C) 2015 ARM Ltd. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef __ASM_ARCH_GICV3_H +#define __ASM_ARCH_GICV3_H + +#ifndef __ASSEMBLY__ + +#include <linux/io.h> + +#define __ACCESS_CP15(CRn, Op1, CRm, Op2) p15, Op1, %0, CRn, CRm, Op2 +#define __ACCESS_CP15_64(Op1, CRm) p15, Op1, %Q0, %R0, CRm + +#define ICC_EOIR1 __ACCESS_CP15(c12, 0, c12, 1) +#define ICC_DIR __ACCESS_CP15(c12, 0, c11, 1) +#define ICC_IAR1 __ACCESS_CP15(c12, 0, c12, 0) +#define ICC_SGI1R __ACCESS_CP15_64(0, c12) +#define ICC_PMR __ACCESS_CP15(c4, 0, c6, 0) +#define ICC_CTLR __ACCESS_CP15(c12, 0, c12, 4) +#define ICC_SRE __ACCESS_CP15(c12, 0, c12, 5) +#define ICC_IGRPEN1 __ACCESS_CP15(c12, 0, c12, 7) + +#define ICC_HSRE __ACCESS_CP15(c12, 4, c9, 5) + +#define ICH_VSEIR __ACCESS_CP15(c12, 4, c9, 4) +#define ICH_HCR __ACCESS_CP15(c12, 4, c11, 0) +#define ICH_VTR __ACCESS_CP15(c12, 4, c11, 1) +#define ICH_MISR __ACCESS_CP15(c12, 4, c11, 2) +#define ICH_EISR __ACCESS_CP15(c12, 4, c11, 3) +#define ICH_ELSR __ACCESS_CP15(c12, 4, c11, 5) +#define ICH_VMCR __ACCESS_CP15(c12, 4, c11, 7) + +#define __LR0(x) __ACCESS_CP15(c12, 4, c12, x) +#define __LR8(x) __ACCESS_CP15(c12, 4, c13, x) + +#define ICH_LR0 __LR0(0) +#define ICH_LR1 __LR0(1) +#define ICH_LR2 __LR0(2) +#define ICH_LR3 __LR0(3) +#define ICH_LR4 __LR0(4) +#define ICH_LR5 __LR0(5) +#define ICH_LR6 __LR0(6) +#define ICH_LR7 __LR0(7) +#define ICH_LR8 __LR8(0) +#define ICH_LR9 __LR8(1) +#define ICH_LR10 __LR8(2) +#define ICH_LR11 __LR8(3) +#define ICH_LR12 __LR8(4) +#define ICH_LR13 __LR8(5) +#define ICH_LR14 __LR8(6) +#define ICH_LR15 __LR8(7) + +/* LR top half */ +#define __LRC0(x) __ACCESS_CP15(c12, 4, c14, x) +#define __LRC8(x) __ACCESS_CP15(c12, 4, c15, x) + +#define ICH_LRC0 __LRC0(0) +#define ICH_LRC1 __LRC0(1) +#define ICH_LRC2 __LRC0(2) +#define ICH_LRC3 __LRC0(3) +#define ICH_LRC4 __LRC0(4) +#define ICH_LRC5 __LRC0(5) +#define ICH_LRC6 __LRC0(6) +#define ICH_LRC7 __LRC0(7) +#define ICH_LRC8 __LRC8(0) +#define ICH_LRC9 __LRC8(1) +#define ICH_LRC10 __LRC8(2) +#define ICH_LRC11 __LRC8(3) +#define ICH_LRC12 __LRC8(4) +#define ICH_LRC13 __LRC8(5) +#define ICH_LRC14 __LRC8(6) +#define ICH_LRC15 __LRC8(7) + +#define __AP0Rx(x) __ACCESS_CP15(c12, 4, c8, x) +#define ICH_AP0R0 __AP0Rx(0) +#define ICH_AP0R1 __AP0Rx(1) +#define ICH_AP0R2 __AP0Rx(2) +#define ICH_AP0R3 __AP0Rx(3) + +#define __AP1Rx(x) __ACCESS_CP15(c12, 4, c9, x) +#define ICH_AP1R0 __AP1Rx(0) +#define ICH_AP1R1 __AP1Rx(1) +#define ICH_AP1R2 __AP1Rx(2) +#define ICH_AP1R3 __AP1Rx(3) + +/* Low-level accessors */ + +static inline void gic_write_eoir(u32 irq) +{ + asm volatile("mcr " __stringify(ICC_EOIR1) : : "r" (irq)); + isb(); +} + +static inline void gic_write_dir(u32 val) +{ + asm volatile("mcr " __stringify(ICC_DIR) : : "r" (val)); + isb(); +} + +static inline u32 gic_read_iar(void) +{ + u32 irqstat; + + asm volatile("mrc " __stringify(ICC_IAR1) : "=r" (irqstat)); + return irqstat; +} + +static inline void gic_write_pmr(u32 val) +{ + asm volatile("mcr " __stringify(ICC_PMR) : : "r" (val)); +} + +static inline void gic_write_ctlr(u32 val) +{ + asm volatile("mcr " __stringify(ICC_CTLR) : : "r" (val)); + isb(); +} + +static inline void gic_write_grpen1(u32 val) +{ + asm volatile("mcr " __stringify(ICC_IGRPEN1) : : "r" (val)); + isb(); +} + +static inline void gic_write_sgi1r(u64 val) +{ + asm volatile("mcrr " __stringify(ICC_SGI1R) : : "r" (val)); +} + +static inline u32 gic_read_sre(void) +{ + u32 val; + + asm volatile("mrc " __stringify(ICC_SRE) : "=r" (val)); + return val; +} + +static inline void gic_write_sre(u32 val) +{ + asm volatile("mcr " __stringify(ICC_SRE) : : "r" (val)); + isb(); +} + +/* + * Even in 32bit systems that use LPAE, there is no guarantee that the I/O + * interface provides true 64bit atomic accesses, so using strd/ldrd doesn't + * make much sense. + * Moreover, 64bit I/O emulation is extremely difficult to implement on + * AArch32, since the syndrome register doesn't provide any information for + * them. + * Consequently, the following IO helpers use 32bit accesses. + * + * There are only two registers that need 64bit accesses in this driver: + * - GICD_IROUTERn, contain the affinity values associated to each interrupt. + * The upper-word (aff3) will always be 0, so there is no need for a lock. + * - GICR_TYPER is an ID register and doesn't need atomicity. + */ +static inline void gic_write_irouter(u64 val, volatile void __iomem *addr) +{ + writel_relaxed((u32)val, addr); + writel_relaxed((u32)(val >> 32), addr + 4); +} + +static inline u64 gic_read_typer(const volatile void __iomem *addr) +{ + u64 val; + + val = readl_relaxed(addr); + val |= (u64)readl_relaxed(addr + 4) << 32; + return val; +} + +#endif /* !__ASSEMBLY__ */ +#endif /* !__ASM_ARCH_GICV3_H */ diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index fe3ef397f5a4..9e10c4567eb4 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -27,8 +27,8 @@ * strex/ldrex monitor on some implementations. The reason we can use it for * atomic_set() is the clrex or dummy strex done on every exception return. */ -#define atomic_read(v) ACCESS_ONCE((v)->counter) -#define atomic_set(v,i) (((v)->counter) = (i)) +#define atomic_read(v) READ_ONCE((v)->counter) +#define atomic_set(v,i) WRITE_ONCE(((v)->counter), (i)) #if __LINUX_ARM_ARCH__ >= 6 @@ -210,8 +210,8 @@ ATOMIC_OP(xor, ^=, eor) #define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0) #define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0) -#define atomic_inc_return(v) (atomic_add_return(1, v)) -#define atomic_dec_return(v) (atomic_sub_return(1, v)) +#define atomic_inc_return_relaxed(v) (atomic_add_return_relaxed(1, v)) +#define atomic_dec_return_relaxed(v) (atomic_sub_return_relaxed(1, v)) #define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0) #define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0) @@ -442,11 +442,11 @@ static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u) #define atomic64_add_negative(a, v) (atomic64_add_return((a), (v)) < 0) #define atomic64_inc(v) atomic64_add(1LL, (v)) -#define atomic64_inc_return(v) atomic64_add_return(1LL, (v)) +#define atomic64_inc_return_relaxed(v) atomic64_add_return_relaxed(1LL, (v)) #define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0) #define atomic64_sub_and_test(a, v) (atomic64_sub_return((a), (v)) == 0) #define atomic64_dec(v) atomic64_sub(1LL, (v)) -#define atomic64_dec_return(v) atomic64_sub_return(1LL, (v)) +#define atomic64_dec_return_relaxed(v) atomic64_sub_return_relaxed(1LL, (v)) #define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0) #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1LL, 0LL) diff --git a/arch/arm/include/asm/cmpxchg.h b/arch/arm/include/asm/cmpxchg.h index 916a2744d5c6..97882f9bad12 100644 --- a/arch/arm/include/asm/cmpxchg.h +++ b/arch/arm/include/asm/cmpxchg.h @@ -39,6 +39,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size switch (size) { #if __LINUX_ARM_ARCH__ >= 6 +#ifndef CONFIG_CPU_V6 /* MIN ARCH >= V6K */ case 1: asm volatile("@ __xchg1\n" "1: ldrexb %0, [%3]\n" @@ -49,6 +50,17 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size : "r" (x), "r" (ptr) : "memory", "cc"); break; + case 2: + asm volatile("@ __xchg2\n" + "1: ldrexh %0, [%3]\n" + " strexh %1, %2, [%3]\n" + " teq %1, #0\n" + " bne 1b" + : "=&r" (ret), "=&r" (tmp) + : "r" (x), "r" (ptr) + : "memory", "cc"); + break; +#endif case 4: asm volatile("@ __xchg4\n" "1: ldrex %0, [%3]\n" diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h index 535579511ed0..0a0e2d1784c0 100644 --- a/arch/arm/include/asm/highmem.h +++ b/arch/arm/include/asm/highmem.h @@ -68,7 +68,6 @@ extern void kunmap(struct page *page); extern void *kmap_atomic(struct page *page); extern void __kunmap_atomic(void *kvaddr); extern void *kmap_atomic_pfn(unsigned long pfn); -extern struct page *kmap_atomic_to_page(const void *ptr); #endif #endif diff --git a/arch/arm/include/asm/irqflags.h b/arch/arm/include/asm/irqflags.h index 43908146a5cf..e6b70d9d084e 100644 --- a/arch/arm/include/asm/irqflags.h +++ b/arch/arm/include/asm/irqflags.h @@ -54,6 +54,14 @@ static inline void arch_local_irq_disable(void) #define local_fiq_enable() __asm__("cpsie f @ __stf" : : : "memory", "cc") #define local_fiq_disable() __asm__("cpsid f @ __clf" : : : "memory", "cc") + +#ifndef CONFIG_CPU_V7M +#define local_abt_enable() __asm__("cpsie a @ __sta" : : : "memory", "cc") +#define local_abt_disable() __asm__("cpsid a @ __cla" : : : "memory", "cc") +#else +#define local_abt_enable() do { } while (0) +#define local_abt_disable() do { } while (0) +#endif #else /* @@ -136,6 +144,8 @@ static inline void arch_local_irq_disable(void) : "memory", "cc"); \ }) +#define local_abt_enable() do { } while (0) +#define local_abt_disable() do { } while (0) #endif /* diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h index d995821f1698..dc641ddf0784 100644 --- a/arch/arm/include/asm/kvm_arm.h +++ b/arch/arm/include/asm/kvm_arm.h @@ -218,4 +218,24 @@ #define HSR_DABT_CM (1U << 8) #define HSR_DABT_EA (1U << 9) +#define kvm_arm_exception_type \ + {0, "RESET" }, \ + {1, "UNDEFINED" }, \ + {2, "SOFTWARE" }, \ + {3, "PREF_ABORT" }, \ + {4, "DATA_ABORT" }, \ + {5, "IRQ" }, \ + {6, "FIQ" }, \ + {7, "HVC" } + +#define HSRECN(x) { HSR_EC_##x, #x } + +#define kvm_arm_exception_class \ + HSRECN(UNKNOWN), HSRECN(WFI), HSRECN(CP15_32), HSRECN(CP15_64), \ + HSRECN(CP14_MR), HSRECN(CP14_LS), HSRECN(CP_0_13), HSRECN(CP10_ID), \ + HSRECN(JAZELLE), HSRECN(BXJ), HSRECN(CP14_64), HSRECN(SVC_HYP), \ + HSRECN(HVC), HSRECN(SMC), HSRECN(IABT), HSRECN(IABT_HYP), \ + HSRECN(DABT), HSRECN(DABT_HYP) + + #endif /* __ARM_KVM_ARM_H__ */ diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index c4072d9f32c7..6692982c9b57 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -126,7 +126,10 @@ struct kvm_vcpu_arch { * here. */ - /* Don't run the guest on this vcpu */ + /* vcpu power-off state */ + bool power_off; + + /* Don't run the guest (internal implementation need) */ bool pause; /* IO related fields */ diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index cb3a40717edd..5c1ad11aa392 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -47,7 +47,7 @@ struct machine_desc { unsigned l2c_aux_val; /* L2 cache aux value */ unsigned l2c_aux_mask; /* L2 cache aux mask */ void (*l2c_write_sec)(unsigned long, unsigned); - struct smp_operations *smp; /* SMP operations */ + const struct smp_operations *smp; /* SMP operations */ bool (*smp_init)(void); void (*fixup)(struct tag *, char **); void (*dt_fixup)(void); diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index 8857d2869a5f..0070e8520cd4 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -52,12 +52,6 @@ struct pci_sys_data { u8 (*swizzle)(struct pci_dev *, u8 *); /* IRQ mapping */ int (*map_irq)(const struct pci_dev *, u8, u8); - /* Resource alignement requirements */ - resource_size_t (*align_resource)(struct pci_dev *dev, - const struct resource *res, - resource_size_t start, - resource_size_t size, - resource_size_t align); void *private_data; /* platform controller private data */ }; diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 98d58bb04ac5..c79b57bf71c4 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -76,10 +76,12 @@ */ #define XIP_VIRT_ADDR(physaddr) (MODULES_VADDR + ((physaddr) & 0x000fffff)) +#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE) /* * Allow 16MB-aligned ioremap pages */ #define IOREMAP_MAX_ORDER 24 +#endif #else /* CONFIG_MMU */ diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index f40354198bad..348caabb7625 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -43,7 +43,7 @@ */ #define VMALLOC_OFFSET (8*1024*1024) #define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) -#define VMALLOC_END 0xff000000UL +#define VMALLOC_END 0xff800000UL #define LIBRARY_TEXT_START 0x0c000000 diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index ef356659b4f4..3d6dc8b460e4 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -112,7 +112,7 @@ struct smp_operations { struct of_cpu_method { const char *method; - struct smp_operations *ops; + const struct smp_operations *ops; }; #define CPU_METHOD_OF_DECLARE(name, _method, _ops) \ @@ -122,6 +122,6 @@ struct of_cpu_method { /* * set platform specific SMP operations */ -extern void smp_set_ops(struct smp_operations *); +extern void smp_set_ops(const struct smp_operations *); #endif /* ifndef __ASM_ARM_SMP_H */ diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 7cba573c2cc9..7b84657fba35 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -21,13 +21,6 @@ */ #define __NR_syscalls (392) -/* - * *NOTE*: This is a ghost syscall private to the kernel. Only the - * __kuser_cmpxchg code in entry-armv.S should be aware of its - * existence. Don't ever use this from user code. - */ -#define __ARM_NR_cmpxchg (__ARM_NR_BASE+0x00fff0) - #define __ARCH_WANT_STAT64 #define __ARCH_WANT_SYS_GETHOSTNAME #define __ARCH_WANT_SYS_PAUSE diff --git a/arch/arm/include/asm/xen/hypervisor.h b/arch/arm/include/asm/xen/hypervisor.h index 04ff8e7b37df..95251512e2c4 100644 --- a/arch/arm/include/asm/xen/hypervisor.h +++ b/arch/arm/include/asm/xen/hypervisor.h @@ -26,4 +26,14 @@ void __init xen_early_init(void); static inline void xen_early_init(void) { return; } #endif +#ifdef CONFIG_HOTPLUG_CPU +static inline void xen_arch_register_cpu(int num) +{ +} + +static inline void xen_arch_unregister_cpu(int num) +{ +} +#endif + #endif /* _ASM_ARM_XEN_HYPERVISOR_H */ diff --git a/arch/arm/include/asm/xen/page-coherent.h b/arch/arm/include/asm/xen/page-coherent.h index efd562412850..0375c8caa061 100644 --- a/arch/arm/include/asm/xen/page-coherent.h +++ b/arch/arm/include/asm/xen/page-coherent.h @@ -35,11 +35,15 @@ static inline void xen_dma_map_page(struct device *hwdev, struct page *page, dma_addr_t dev_addr, unsigned long offset, size_t size, enum dma_data_direction dir, struct dma_attrs *attrs) { - bool local = PFN_DOWN(dev_addr) == page_to_pfn(page); - /* Dom0 is mapped 1:1, so if pfn == mfn the page is local otherwise - * is a foreign page grant-mapped in dom0. If the page is local we - * can safely call the native dma_ops function, otherwise we call - * the xen specific function. */ + bool local = XEN_PFN_DOWN(dev_addr) == page_to_xen_pfn(page); + /* + * Dom0 is mapped 1:1, while the Linux page can be spanned accross + * multiple Xen page, it's not possible to have a mix of local and + * foreign Xen page. So if the first xen_pfn == mfn the page is local + * otherwise it's a foreign page grant-mapped in dom0. If the page is + * local we can safely call the native dma_ops function, otherwise we + * call the xen specific function. + */ if (local) __generic_dma_ops(hwdev)->map_page(hwdev, page, offset, size, dir, attrs); else @@ -51,10 +55,14 @@ static inline void xen_dma_unmap_page(struct device *hwdev, dma_addr_t handle, struct dma_attrs *attrs) { unsigned long pfn = PFN_DOWN(handle); - /* Dom0 is mapped 1:1, so calling pfn_valid on a foreign mfn will - * always return false. If the page is local we can safely call the - * native dma_ops function, otherwise we call the xen specific - * function. */ + /* + * Dom0 is mapped 1:1, while the Linux page can be spanned accross + * multiple Xen page, it's not possible to have a mix of local and + * foreign Xen page. Dom0 is mapped 1:1, so calling pfn_valid on a + * foreign mfn will always return false. If the page is local we can + * safely call the native dma_ops function, otherwise we call the xen + * specific function. + */ if (pfn_valid(pfn)) { if (__generic_dma_ops(hwdev)->unmap_page) __generic_dma_ops(hwdev)->unmap_page(hwdev, handle, size, dir, attrs); diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h index 127956353b00..415dbc6e43fd 100644 --- a/arch/arm/include/asm/xen/page.h +++ b/arch/arm/include/asm/xen/page.h @@ -13,9 +13,6 @@ #define phys_to_machine_mapping_valid(pfn) (1) -#define pte_mfn pte_pfn -#define mfn_pte pfn_pte - /* Xen machine address */ typedef struct xmaddr { phys_addr_t maddr; @@ -31,6 +28,17 @@ typedef struct xpaddr { #define INVALID_P2M_ENTRY (~0UL) +/* + * The pseudo-physical frame (pfn) used in all the helpers is always based + * on Xen page granularity (i.e 4KB). + * + * A Linux page may be split across multiple non-contiguous Xen page so we + * have to keep track with frame based on 4KB page granularity. + * + * PV drivers should never make a direct usage of those helpers (particularly + * pfn_to_gfn and gfn_to_pfn). + */ + unsigned long __pfn_to_mfn(unsigned long pfn); extern struct rb_root phys_to_mach; @@ -67,8 +75,8 @@ static inline unsigned long bfn_to_pfn(unsigned long bfn) #define bfn_to_local_pfn(bfn) bfn_to_pfn(bfn) /* VIRT <-> GUEST conversion */ -#define virt_to_gfn(v) (pfn_to_gfn(virt_to_pfn(v))) -#define gfn_to_virt(m) (__va(gfn_to_pfn(m) << PAGE_SHIFT)) +#define virt_to_gfn(v) (pfn_to_gfn(virt_to_phys(v) >> XEN_PAGE_SHIFT)) +#define gfn_to_virt(m) (__va(gfn_to_pfn(m) << XEN_PAGE_SHIFT)) /* Only used in PV code. But ARM guests are always HVM. */ static inline xmaddr_t arbitrary_virt_to_machine(void *vaddr) @@ -107,8 +115,8 @@ static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn) #define xen_unmap(cookie) iounmap((cookie)) bool xen_arch_need_swiotlb(struct device *dev, - unsigned long pfn, - unsigned long bfn); + phys_addr_t phys, + dma_addr_t dev_addr); unsigned long xen_get_swiotlb_free_pages(unsigned int order); #endif /* _ASM_ARM_XEN_PAGE_H */ diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 874e1823f803..6551d28c27e6 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -17,6 +17,11 @@ #include <asm/mach/pci.h> static int debug_pci; +static resource_size_t (*align_resource)(struct pci_dev *dev, + const struct resource *res, + resource_size_t start, + resource_size_t size, + resource_size_t align) = NULL; /* * We can't use pci_get_device() here since we are @@ -456,7 +461,7 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw, sys->busnr = busnr; sys->swizzle = hw->swizzle; sys->map_irq = hw->map_irq; - sys->align_resource = hw->align_resource; + align_resource = hw->align_resource; INIT_LIST_HEAD(&sys->resources); if (hw->private_data) @@ -572,7 +577,6 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; - struct pci_sys_data *sys = dev->sysdata; resource_size_t start = res->start; if (res->flags & IORESOURCE_IO && start & 0x300) @@ -580,8 +584,8 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, start = (start + align - 1) & ~(align - 1); - if (sys->align_resource) - return sys->align_resource(dev, res, start, size, align); + if (align_resource) + return align_resource(dev, res, start, size, align); return start; } diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 11c54de9f8cf..65addcbf5b30 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -101,6 +101,7 @@ void __init arm_dt_init_cpu_maps(void) if (of_property_read_u32(cpu, "reg", &hwid)) { pr_debug(" * %s missing reg property\n", cpu->full_name); + of_node_put(cpu); return; } @@ -108,8 +109,10 @@ void __init arm_dt_init_cpu_maps(void) * 8 MSBs must be set to 0 in the DT since the reg property * defines the MPIDR[23:0]. */ - if (hwid & ~MPIDR_HWID_BITMASK) + if (hwid & ~MPIDR_HWID_BITMASK) { + of_node_put(cpu); return; + } /* * Duplicate MPIDRs are a recipe for disaster. @@ -119,9 +122,11 @@ void __init arm_dt_init_cpu_maps(void) * to avoid matching valid MPIDR[23:0] values. */ for (j = 0; j < cpuidx; j++) - if (WARN(tmp_map[j] == hwid, "Duplicate /cpu reg " - "properties in the DT\n")) + if (WARN(tmp_map[j] == hwid, + "Duplicate /cpu reg properties in the DT\n")) { + of_node_put(cpu); return; + } /* * Build a stashed array of MPIDR values. Numbering scheme @@ -143,6 +148,7 @@ void __init arm_dt_init_cpu_maps(void) "max cores %u, capping them\n", cpuidx, nr_cpu_ids)) { cpuidx = nr_cpu_ids; + of_node_put(cpu); break; } diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 3e1c26eb32b4..3ce377f7251f 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -427,8 +427,7 @@ ENDPROC(__fiq_abt) .endm .macro kuser_cmpxchg_check -#if !defined(CONFIG_CPU_32v6K) && defined(CONFIG_KUSER_HELPERS) && \ - !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) +#if !defined(CONFIG_CPU_32v6K) && defined(CONFIG_KUSER_HELPERS) #ifndef CONFIG_MMU #warning "NPTL on non MMU needs fixing" #else @@ -859,20 +858,7 @@ __kuser_helper_start: __kuser_cmpxchg64: @ 0xffff0f60 -#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) - - /* - * Poor you. No fast solution possible... - * The kernel itself must perform the operation. - * A special ghost syscall is used for that (see traps.c). - */ - stmfd sp!, {r7, lr} - ldr r7, 1f @ it's 20 bits - swi __ARM_NR_cmpxchg64 - ldmfd sp!, {r7, pc} -1: .word __ARM_NR_cmpxchg64 - -#elif defined(CONFIG_CPU_32v6K) +#if defined(CONFIG_CPU_32v6K) stmfd sp!, {r4, r5, r6, r7} ldrd r4, r5, [r0] @ load old val @@ -948,20 +934,7 @@ __kuser_memory_barrier: @ 0xffff0fa0 __kuser_cmpxchg: @ 0xffff0fc0 -#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) - - /* - * Poor you. No fast solution possible... - * The kernel itself must perform the operation. - * A special ghost syscall is used for that (see traps.c). - */ - stmfd sp!, {r7, lr} - ldr r7, 1f @ it's 20 bits - swi __ARM_NR_cmpxchg - ldmfd sp!, {r7, pc} -1: .word __ARM_NR_cmpxchg - -#elif __LINUX_ARM_ARCH__ < 6 +#if __LINUX_ARM_ARCH__ < 6 #ifdef CONFIG_MMU diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index dc7d0a95bd36..6284779d64ee 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -35,7 +35,6 @@ #include <asm/cputype.h> #include <asm/current.h> #include <asm/hw_breakpoint.h> -#include <asm/kdebug.h> #include <asm/traps.h> /* Breakpoint currently in use for each BRP. */ diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c index fd9eefce0a7b..9232caee7060 100644 --- a/arch/arm/kernel/kgdb.c +++ b/arch/arm/kernel/kgdb.c @@ -74,7 +74,7 @@ int dbg_set_reg(int regno, void *mem, struct pt_regs *regs) void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task) { - struct pt_regs *thread_regs; + struct thread_info *ti; int regno; /* Just making sure... */ @@ -86,24 +86,17 @@ sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task) gdb_regs[regno] = 0; /* Otherwise, we have only some registers from switch_to() */ - thread_regs = task_pt_regs(task); - gdb_regs[_R0] = thread_regs->ARM_r0; - gdb_regs[_R1] = thread_regs->ARM_r1; - gdb_regs[_R2] = thread_regs->ARM_r2; - gdb_regs[_R3] = thread_regs->ARM_r3; - gdb_regs[_R4] = thread_regs->ARM_r4; - gdb_regs[_R5] = thread_regs->ARM_r5; - gdb_regs[_R6] = thread_regs->ARM_r6; - gdb_regs[_R7] = thread_regs->ARM_r7; - gdb_regs[_R8] = thread_regs->ARM_r8; - gdb_regs[_R9] = thread_regs->ARM_r9; - gdb_regs[_R10] = thread_regs->ARM_r10; - gdb_regs[_FP] = thread_regs->ARM_fp; - gdb_regs[_IP] = thread_regs->ARM_ip; - gdb_regs[_SPT] = thread_regs->ARM_sp; - gdb_regs[_LR] = thread_regs->ARM_lr; - gdb_regs[_PC] = thread_regs->ARM_pc; - gdb_regs[_CPSR] = thread_regs->ARM_cpsr; + ti = task_thread_info(task); + gdb_regs[_R4] = ti->cpu_context.r4; + gdb_regs[_R5] = ti->cpu_context.r5; + gdb_regs[_R6] = ti->cpu_context.r6; + gdb_regs[_R7] = ti->cpu_context.r7; + gdb_regs[_R8] = ti->cpu_context.r8; + gdb_regs[_R9] = ti->cpu_context.r9; + gdb_regs[_R10] = ti->cpu_context.sl; + gdb_regs[_FP] = ti->cpu_context.fp; + gdb_regs[_SPT] = ti->cpu_context.sp; + gdb_regs[_PC] = ti->cpu_context.pc; } void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc) diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c index 61c04b02faeb..9d479b2ea40d 100644 --- a/arch/arm/kernel/psci_smp.c +++ b/arch/arm/kernel/psci_smp.c @@ -71,7 +71,7 @@ int psci_cpu_disable(unsigned int cpu) return 0; } -void __ref psci_cpu_die(unsigned int cpu) +void psci_cpu_die(unsigned int cpu) { u32 state = PSCI_POWER_STATE_TYPE_POWER_DOWN << PSCI_0_2_POWER_STATE_TYPE_SHIFT; @@ -83,7 +83,7 @@ void __ref psci_cpu_die(unsigned int cpu) panic("psci: cpu %d failed to shutdown\n", cpu); } -int __ref psci_cpu_kill(unsigned int cpu) +int psci_cpu_kill(unsigned int cpu) { int err, i; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 48185a773852..b26361355dae 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -80,7 +80,7 @@ static DECLARE_COMPLETION(cpu_running); static struct smp_operations smp_ops; -void __init smp_set_ops(struct smp_operations *ops) +void __init smp_set_ops(const struct smp_operations *ops) { if (ops) smp_ops = *ops; @@ -400,6 +400,7 @@ asmlinkage void secondary_start_kernel(void) local_irq_enable(); local_fiq_enable(); + local_abt_enable(); /* * OK, it's off to the idle thread for us @@ -748,6 +749,15 @@ core_initcall(register_cpufreq_notifier); static void raise_nmi(cpumask_t *mask) { + /* + * Generate the backtrace directly if we are running in a calling + * context that is not preemptible by the backtrace IPI. Note + * that nmi_cpu_backtrace() automatically removes the current cpu + * from mask. + */ + if (cpumask_test_cpu(smp_processor_id(), mask) && irqs_disabled()) + nmi_cpu_backtrace(NULL); + smp_cross_call(mask, IPI_CPU_BACKTRACE); } diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index e9035cda1485..1bfa7a7f5533 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -23,7 +23,6 @@ #include <linux/of_irq.h> #include <linux/of_address.h> -#include <asm/smp_plat.h> #include <asm/smp_twd.h> /* set up by the platform code */ @@ -34,6 +33,8 @@ static unsigned long twd_timer_rate; static DEFINE_PER_CPU(bool, percpu_setup_called); static struct clock_event_device __percpu *twd_evt; +static unsigned int twd_features = + CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; static int twd_ppi; static int twd_shutdown(struct clock_event_device *clk) @@ -294,8 +295,7 @@ static void twd_timer_setup(void) writel_relaxed(0, twd_base + TWD_TIMER_CONTROL); clk->name = "local_timer"; - clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT | - CLOCK_EVT_FEAT_C3STOP; + clk->features = twd_features; clk->rating = 350; clk->set_state_shutdown = twd_shutdown; clk->set_state_periodic = twd_set_periodic; @@ -350,6 +350,8 @@ static int __init twd_local_timer_common_register(struct device_node *np) goto out_irq; twd_get_clock(np); + if (!of_property_read_bool(np, "always-on")) + twd_features |= CLOCK_EVT_FEAT_C3STOP; /* * Immediately configure the timer on the boot CPU, unless we need @@ -392,9 +394,6 @@ static void __init twd_local_timer_of_register(struct device_node *np) { int err; - if (!is_smp() || !setup_max_cpus) - return; - twd_ppi = irq_of_parse_and_map(np, 0); if (!twd_ppi) { err = -EINVAL; diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index a66e37e211a9..97b22fa7cb3a 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -120,6 +120,6 @@ void __init time_init(void) #ifdef CONFIG_COMMON_CLK of_clk_init(NULL); #endif - clocksource_of_init(); + clocksource_probe(); } } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 969f9d9e665f..bc698383e822 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -625,58 +625,6 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) set_tls(regs->ARM_r0); return 0; -#ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG - /* - * Atomically store r1 in *r2 if *r2 is equal to r0 for user space. - * Return zero in r0 if *MEM was changed or non-zero if no exchange - * happened. Also set the user C flag accordingly. - * If access permissions have to be fixed up then non-zero is - * returned and the operation has to be re-attempted. - * - * *NOTE*: This is a ghost syscall private to the kernel. Only the - * __kuser_cmpxchg code in entry-armv.S should be aware of its - * existence. Don't ever use this from user code. - */ - case NR(cmpxchg): - for (;;) { - extern void do_DataAbort(unsigned long addr, unsigned int fsr, - struct pt_regs *regs); - unsigned long val; - unsigned long addr = regs->ARM_r2; - struct mm_struct *mm = current->mm; - pgd_t *pgd; pmd_t *pmd; pte_t *pte; - spinlock_t *ptl; - - regs->ARM_cpsr &= ~PSR_C_BIT; - down_read(&mm->mmap_sem); - pgd = pgd_offset(mm, addr); - if (!pgd_present(*pgd)) - goto bad_access; - pmd = pmd_offset(pgd, addr); - if (!pmd_present(*pmd)) - goto bad_access; - pte = pte_offset_map_lock(mm, pmd, addr, &ptl); - if (!pte_present(*pte) || !pte_write(*pte) || !pte_dirty(*pte)) { - pte_unmap_unlock(pte, ptl); - goto bad_access; - } - val = *(unsigned long *)addr; - val -= regs->ARM_r0; - if (val == 0) { - *(unsigned long *)addr = regs->ARM_r1; - regs->ARM_cpsr |= PSR_C_BIT; - } - pte_unmap_unlock(pte, ptl); - up_read(&mm->mmap_sem); - return val; - - bad_access: - up_read(&mm->mmap_sem); - /* simulate a write access fault */ - do_DataAbort(addr, 15 + (1 << 11), regs); - } -#endif - default: /* Calls 9f00xx..9f07ff are defined to return -ENOSYS if not implemented, rather than raising SIGILL. This diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig index 210eccadb69a..95a000515e43 100644 --- a/arch/arm/kvm/Kconfig +++ b/arch/arm/kvm/Kconfig @@ -21,6 +21,7 @@ config KVM depends on MMU && OF select PREEMPT_NOTIFIERS select ANON_INODES + select ARM_GIC select HAVE_KVM_CPU_RELAX_INTERCEPT select HAVE_KVM_ARCH_TLB_FLUSH_ALL select KVM_MMIO @@ -45,4 +46,6 @@ config KVM_ARM_HOST ---help--- Provides host support for ARM processors. +source drivers/vhost/Kconfig + endif # VIRTUALIZATION diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index dc017adfddc8..eab83b2435b8 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -271,6 +271,16 @@ int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu) return kvm_timer_should_fire(vcpu); } +void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu) +{ + kvm_timer_schedule(vcpu); +} + +void kvm_arch_vcpu_unblocking(struct kvm_vcpu *vcpu) +{ + kvm_timer_unschedule(vcpu); +} + int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) { /* Force users to call KVM_ARM_VCPU_INIT */ @@ -308,7 +318,7 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu, struct kvm_mp_state *mp_state) { - if (vcpu->arch.pause) + if (vcpu->arch.power_off) mp_state->mp_state = KVM_MP_STATE_STOPPED; else mp_state->mp_state = KVM_MP_STATE_RUNNABLE; @@ -321,10 +331,10 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, { switch (mp_state->mp_state) { case KVM_MP_STATE_RUNNABLE: - vcpu->arch.pause = false; + vcpu->arch.power_off = false; break; case KVM_MP_STATE_STOPPED: - vcpu->arch.pause = true; + vcpu->arch.power_off = true; break; default: return -EINVAL; @@ -342,7 +352,8 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, */ int kvm_arch_vcpu_runnable(struct kvm_vcpu *v) { - return !!v->arch.irq_lines || kvm_vgic_vcpu_pending_irq(v); + return ((!!v->arch.irq_lines || kvm_vgic_vcpu_pending_irq(v)) + && !v->arch.power_off && !v->arch.pause); } /* Just ensure a guest exit from a particular CPU */ @@ -468,11 +479,38 @@ bool kvm_arch_intc_initialized(struct kvm *kvm) return vgic_initialized(kvm); } -static void vcpu_pause(struct kvm_vcpu *vcpu) +static void kvm_arm_halt_guest(struct kvm *kvm) __maybe_unused; +static void kvm_arm_resume_guest(struct kvm *kvm) __maybe_unused; + +static void kvm_arm_halt_guest(struct kvm *kvm) +{ + int i; + struct kvm_vcpu *vcpu; + + kvm_for_each_vcpu(i, vcpu, kvm) + vcpu->arch.pause = true; + force_vm_exit(cpu_all_mask); +} + +static void kvm_arm_resume_guest(struct kvm *kvm) +{ + int i; + struct kvm_vcpu *vcpu; + + kvm_for_each_vcpu(i, vcpu, kvm) { + wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); + + vcpu->arch.pause = false; + wake_up_interruptible(wq); + } +} + +static void vcpu_sleep(struct kvm_vcpu *vcpu) { wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); - wait_event_interruptible(*wq, !vcpu->arch.pause); + wait_event_interruptible(*wq, ((!vcpu->arch.power_off) && + (!vcpu->arch.pause))); } static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu) @@ -522,8 +560,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) update_vttbr(vcpu->kvm); - if (vcpu->arch.pause) - vcpu_pause(vcpu); + if (vcpu->arch.power_off || vcpu->arch.pause) + vcpu_sleep(vcpu); /* * Disarming the background timer must be done in a @@ -549,11 +587,12 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) run->exit_reason = KVM_EXIT_INTR; } - if (ret <= 0 || need_new_vmid_gen(vcpu->kvm)) { + if (ret <= 0 || need_new_vmid_gen(vcpu->kvm) || + vcpu->arch.power_off || vcpu->arch.pause) { local_irq_enable(); + kvm_timer_sync_hwstate(vcpu); kvm_vgic_sync_hwstate(vcpu); preempt_enable(); - kvm_timer_sync_hwstate(vcpu); continue; } @@ -596,14 +635,19 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) * guest time. */ kvm_guest_exit(); - trace_kvm_exit(kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu)); + trace_kvm_exit(ret, kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu)); + + /* + * We must sync the timer state before the vgic state so that + * the vgic can properly sample the updated state of the + * interrupt line. + */ + kvm_timer_sync_hwstate(vcpu); kvm_vgic_sync_hwstate(vcpu); preempt_enable(); - kvm_timer_sync_hwstate(vcpu); - ret = handle_exit(vcpu, run, ret); } @@ -765,12 +809,12 @@ static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu, vcpu_reset_hcr(vcpu); /* - * Handle the "start in power-off" case by marking the VCPU as paused. + * Handle the "start in power-off" case. */ if (test_bit(KVM_ARM_VCPU_POWER_OFF, vcpu->arch.features)) - vcpu->arch.pause = true; + vcpu->arch.power_off = true; else - vcpu->arch.pause = false; + vcpu->arch.power_off = false; return 0; } @@ -1080,7 +1124,7 @@ static int init_hyp_mode(void) */ err = kvm_timer_hyp_init(); if (err) - goto out_free_mappings; + goto out_free_context; #ifndef CONFIG_HOTPLUG_CPU free_boot_hyp_pgd(); diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c index ad6f6424f1d1..0b556968a6da 100644 --- a/arch/arm/kvm/psci.c +++ b/arch/arm/kvm/psci.c @@ -63,7 +63,7 @@ static unsigned long kvm_psci_vcpu_suspend(struct kvm_vcpu *vcpu) static void kvm_psci_vcpu_off(struct kvm_vcpu *vcpu) { - vcpu->arch.pause = true; + vcpu->arch.power_off = true; } static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) @@ -87,7 +87,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) */ if (!vcpu) return PSCI_RET_INVALID_PARAMS; - if (!vcpu->arch.pause) { + if (!vcpu->arch.power_off) { if (kvm_psci_version(source_vcpu) != KVM_ARM_PSCI_0_1) return PSCI_RET_ALREADY_ON; else @@ -115,7 +115,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) * the general puspose registers are undefined upon CPU_ON. */ *vcpu_reg(vcpu, 0) = context_id; - vcpu->arch.pause = false; + vcpu->arch.power_off = false; smp_mb(); /* Make sure the above is visible */ wq = kvm_arch_vcpu_wq(vcpu); @@ -153,7 +153,7 @@ static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu) mpidr = kvm_vcpu_get_mpidr_aff(tmp); if ((mpidr & target_affinity_mask) == target_affinity) { matching_cpus++; - if (!tmp->arch.pause) + if (!tmp->arch.power_off) return PSCI_0_2_AFFINITY_LEVEL_ON; } } @@ -179,7 +179,7 @@ static void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type) * re-initialized. */ kvm_for_each_vcpu(i, tmp, vcpu->kvm) { - tmp->arch.pause = true; + tmp->arch.power_off = true; kvm_vcpu_kick(tmp); } diff --git a/arch/arm/kvm/trace.h b/arch/arm/kvm/trace.h index 0ec35392d208..c25a88598eb0 100644 --- a/arch/arm/kvm/trace.h +++ b/arch/arm/kvm/trace.h @@ -25,21 +25,25 @@ TRACE_EVENT(kvm_entry, ); TRACE_EVENT(kvm_exit, - TP_PROTO(unsigned int exit_reason, unsigned long vcpu_pc), - TP_ARGS(exit_reason, vcpu_pc), + TP_PROTO(int idx, unsigned int exit_reason, unsigned long vcpu_pc), + TP_ARGS(idx, exit_reason, vcpu_pc), TP_STRUCT__entry( + __field( int, idx ) __field( unsigned int, exit_reason ) __field( unsigned long, vcpu_pc ) ), TP_fast_assign( + __entry->idx = idx; __entry->exit_reason = exit_reason; __entry->vcpu_pc = vcpu_pc; ), - TP_printk("HSR_EC: 0x%04x, PC: 0x%08lx", + TP_printk("%s: HSR_EC: 0x%04x (%s), PC: 0x%08lx", + __print_symbolic(__entry->idx, kvm_arm_exception_type), __entry->exit_reason, + __print_symbolic(__entry->exit_reason, kvm_arm_exception_class), __entry->vcpu_pc) ); diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S index 970d6c043774..e936352ccb00 100644 --- a/arch/arm/lib/clear_user.S +++ b/arch/arm/lib/clear_user.S @@ -9,6 +9,7 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/unwind.h> .text @@ -20,6 +21,8 @@ */ ENTRY(__clear_user_std) WEAK(arm_clear_user) +UNWIND(.fnstart) +UNWIND(.save {r1, lr}) stmfd sp!, {r1, lr} mov r2, #0 cmp r1, #4 @@ -44,6 +47,7 @@ WEAK(arm_clear_user) USER( strnebt r2, [r0]) mov r0, #0 ldmfd sp!, {r1, pc} +UNWIND(.fnend) ENDPROC(arm_clear_user) ENDPROC(__clear_user_std) diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 89a755b90db2..92673006e55c 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -102,6 +102,9 @@ config HAVE_AT91_SMD config HAVE_AT91_H32MX bool +config HAVE_AT91_GENERATED_CLK + bool + config SOC_SAM_V4_V5 bool diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 0be09af9dec7..8c53c55be1fe 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -14,7 +14,7 @@ config ARCH_BCM_IPROC select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select ARM_GLOBAL_TIMER - + select COMMON_CLK_IPROC select CLKSRC_MMIO select ARCH_REQUIRE_GPIOLIB select ARM_AMBA diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index c622c306c390..47905a50e075 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -65,8 +65,9 @@ static void __iomem *cns3xxx_pci_map_bus(struct pci_bus *bus, /* * The CNS PCI bridge doesn't fit into the PCI hierarchy, though - * we still want to access it. For this to work, we must place - * the first device on the same bus as the CNS PCI bridge. + * we still want to access it. + * We place the host bridge on bus 0, and the directly connected + * device on bus 1, slot 0. */ if (busno == 0) { /* internal PCIe bus, host bridge device */ if (devfn == 0) /* device# and function# are ignored by hw */ @@ -211,58 +212,46 @@ static void __init cns3xxx_pcie_check_link(struct cns3xxx_pcie *cnspci) } } +static void cns3xxx_write_config(struct cns3xxx_pcie *cnspci, + int where, int size, u32 val) +{ + void __iomem *base = cnspci->host_regs + (where & 0xffc); + u32 v; + u32 mask = (0x1ull << (size * 8)) - 1; + int shift = (where % 4) * 8; + + v = readl_relaxed(base + (where & 0xffc)); + + v &= ~(mask << shift); + v |= (val & mask) << shift; + + writel_relaxed(v, base + (where & 0xffc)); + readl_relaxed(base + (where & 0xffc)); +} + static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci) { - int port = cnspci->port; - struct pci_sys_data sd = { - .private_data = cnspci, - }; - struct pci_bus bus = { - .number = 0, - .ops = &cns3xxx_pcie_ops, - .sysdata = &sd, - }; u16 mem_base = cnspci->res_mem.start >> 16; u16 mem_limit = cnspci->res_mem.end >> 16; u16 io_base = cnspci->res_io.start >> 16; u16 io_limit = cnspci->res_io.end >> 16; - u32 devfn = 0; - u8 tmp8; - u16 pos; - u16 dc; - - pci_bus_write_config_byte(&bus, devfn, PCI_PRIMARY_BUS, 0); - pci_bus_write_config_byte(&bus, devfn, PCI_SECONDARY_BUS, 1); - pci_bus_write_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, 1); - pci_bus_read_config_byte(&bus, devfn, PCI_PRIMARY_BUS, &tmp8); - pci_bus_read_config_byte(&bus, devfn, PCI_SECONDARY_BUS, &tmp8); - pci_bus_read_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, &tmp8); - - pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_BASE, mem_base); - pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, mem_limit); - pci_bus_write_config_word(&bus, devfn, PCI_IO_BASE_UPPER16, io_base); - pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, io_limit); + cns3xxx_write_config(cnspci, PCI_PRIMARY_BUS, 1, 0); + cns3xxx_write_config(cnspci, PCI_SECONDARY_BUS, 1, 1); + cns3xxx_write_config(cnspci, PCI_SUBORDINATE_BUS, 1, 1); + cns3xxx_write_config(cnspci, PCI_MEMORY_BASE, 2, mem_base); + cns3xxx_write_config(cnspci, PCI_MEMORY_LIMIT, 2, mem_limit); + cns3xxx_write_config(cnspci, PCI_IO_BASE_UPPER16, 2, io_base); + cns3xxx_write_config(cnspci, PCI_IO_LIMIT_UPPER16, 2, io_limit); if (!cnspci->linked) return; /* Set Device Max_Read_Request_Size to 128 byte */ - bus.number = 1; /* directly connected PCIe device */ - devfn = PCI_DEVFN(0, 0); - pos = pci_bus_find_capability(&bus, devfn, PCI_CAP_ID_EXP); - pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc); - if (dc & PCI_EXP_DEVCTL_READRQ) { - dc &= ~PCI_EXP_DEVCTL_READRQ; - pci_bus_write_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, dc); - pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc); - if (dc & PCI_EXP_DEVCTL_READRQ) - pr_warn("PCIe: Unable to set device Max_Read_Request_Size\n"); - else - pr_info("PCIe: Max_Read_Request_Size set to 128 bytes\n"); - } + pcie_bus_config = PCIE_BUS_PEER2PEER; + /* Disable PCIe0 Interrupt Mask INTA to INTD */ - __raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(port)); + __raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(cnspci->port)); } static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr, diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 1a0898c1c17e..bbdd2d614b49 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -546,9 +546,7 @@ static int dm6444evm_msp430_get_pins(void) if (status < 0) return status; - dev_dbg(&dm6446evm_msp->dev, - "PINS: %02x %02x %02x %02x\n", - buf[0], buf[1], buf[2], buf[3]); + dev_dbg(&dm6446evm_msp->dev, "PINS: %4ph\n", buf); return (buf[3] << 8) | buf[2]; } diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index c70bb0a4dfb4..3caff9637a82 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -97,7 +97,9 @@ int clk_enable(struct clk *clk) { unsigned long flags; - if (clk == NULL || IS_ERR(clk)) + if (!clk) + return 0; + else if (IS_ERR(clk)) return -EINVAL; spin_lock_irqsave(&clockfw_lock, flags); @@ -124,7 +126,7 @@ EXPORT_SYMBOL(clk_disable); unsigned long clk_get_rate(struct clk *clk) { if (clk == NULL || IS_ERR(clk)) - return -EINVAL; + return 0; return clk->rate; } @@ -159,8 +161,10 @@ int clk_set_rate(struct clk *clk, unsigned long rate) unsigned long flags; int ret = -EINVAL; - if (clk == NULL || IS_ERR(clk)) - return ret; + if (!clk) + return 0; + else if (IS_ERR(clk)) + return -EINVAL; if (clk->set_rate) ret = clk->set_rate(clk, rate); @@ -181,7 +185,9 @@ int clk_set_parent(struct clk *clk, struct clk *parent) { unsigned long flags; - if (clk == NULL || IS_ERR(clk)) + if (!clk) + return 0; + else if (IS_ERR(clk)) return -EINVAL; /* Cannot change parent on enabled clock */ diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 29e08aac8294..28c90bc372bd 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -147,150 +147,118 @@ static s8 da850_queue_priority_mapping[][2] = { {-1, -1} }; -static struct edma_soc_info da830_edma_cc0_info = { +static struct edma_soc_info da8xx_edma0_pdata = { .queue_priority_mapping = da8xx_queue_priority_mapping, .default_queue = EVENTQ_1, }; -static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = { - &da830_edma_cc0_info, +static struct edma_soc_info da850_edma1_pdata = { + .queue_priority_mapping = da850_queue_priority_mapping, + .default_queue = EVENTQ_0, }; -static struct edma_soc_info da850_edma_cc_info[] = { +static struct resource da8xx_edma0_resources[] = { { - .queue_priority_mapping = da8xx_queue_priority_mapping, - .default_queue = EVENTQ_1, - }, - { - .queue_priority_mapping = da850_queue_priority_mapping, - .default_queue = EVENTQ_0, - }, -}; - -static struct edma_soc_info *da850_edma_info[EDMA_MAX_CC] = { - &da850_edma_cc_info[0], - &da850_edma_cc_info[1], -}; - -static struct resource da830_edma_resources[] = { - { - .name = "edma_cc0", + .name = "edma3_cc", .start = DA8XX_TPCC_BASE, .end = DA8XX_TPCC_BASE + SZ_32K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc0", + .name = "edma3_tc0", .start = DA8XX_TPTC0_BASE, .end = DA8XX_TPTC0_BASE + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc1", + .name = "edma3_tc1", .start = DA8XX_TPTC1_BASE, .end = DA8XX_TPTC1_BASE + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma0", + .name = "edma3_ccint", .start = IRQ_DA8XX_CCINT0, .flags = IORESOURCE_IRQ, }, { - .name = "edma0_err", + .name = "edma3_ccerrint", .start = IRQ_DA8XX_CCERRINT, .flags = IORESOURCE_IRQ, }, }; -static struct resource da850_edma_resources[] = { - { - .name = "edma_cc0", - .start = DA8XX_TPCC_BASE, - .end = DA8XX_TPCC_BASE + SZ_32K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma_tc0", - .start = DA8XX_TPTC0_BASE, - .end = DA8XX_TPTC0_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma_tc1", - .start = DA8XX_TPTC1_BASE, - .end = DA8XX_TPTC1_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, +static struct resource da850_edma1_resources[] = { { - .name = "edma_cc1", + .name = "edma3_cc", .start = DA850_TPCC1_BASE, .end = DA850_TPCC1_BASE + SZ_32K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc2", + .name = "edma3_tc0", .start = DA850_TPTC2_BASE, .end = DA850_TPTC2_BASE + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma0", - .start = IRQ_DA8XX_CCINT0, - .flags = IORESOURCE_IRQ, - }, - { - .name = "edma0_err", - .start = IRQ_DA8XX_CCERRINT, - .flags = IORESOURCE_IRQ, - }, - { - .name = "edma1", + .name = "edma3_ccint", .start = IRQ_DA850_CCINT1, .flags = IORESOURCE_IRQ, }, { - .name = "edma1_err", + .name = "edma3_ccerrint", .start = IRQ_DA850_CCERRINT1, .flags = IORESOURCE_IRQ, }, }; -static struct platform_device da830_edma_device = { +static const struct platform_device_info da8xx_edma0_device __initconst = { .name = "edma", - .id = -1, - .dev = { - .platform_data = da830_edma_info, - }, - .num_resources = ARRAY_SIZE(da830_edma_resources), - .resource = da830_edma_resources, + .id = 0, + .dma_mask = DMA_BIT_MASK(32), + .res = da8xx_edma0_resources, + .num_res = ARRAY_SIZE(da8xx_edma0_resources), + .data = &da8xx_edma0_pdata, + .size_data = sizeof(da8xx_edma0_pdata), }; -static struct platform_device da850_edma_device = { +static const struct platform_device_info da850_edma1_device __initconst = { .name = "edma", - .id = -1, - .dev = { - .platform_data = da850_edma_info, - }, - .num_resources = ARRAY_SIZE(da850_edma_resources), - .resource = da850_edma_resources, + .id = 1, + .dma_mask = DMA_BIT_MASK(32), + .res = da850_edma1_resources, + .num_res = ARRAY_SIZE(da850_edma1_resources), + .data = &da850_edma1_pdata, + .size_data = sizeof(da850_edma1_pdata), }; int __init da830_register_edma(struct edma_rsv_info *rsv) { - da830_edma_cc0_info.rsv = rsv; + struct platform_device *edma_pdev; + + da8xx_edma0_pdata.rsv = rsv; - return platform_device_register(&da830_edma_device); + edma_pdev = platform_device_register_full(&da8xx_edma0_device); + return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0; } int __init da850_register_edma(struct edma_rsv_info *rsv[2]) { + struct platform_device *edma_pdev; + if (rsv) { - da850_edma_cc_info[0].rsv = rsv[0]; - da850_edma_cc_info[1].rsv = rsv[1]; + da8xx_edma0_pdata.rsv = rsv[0]; + da850_edma1_pdata.rsv = rsv[1]; } - return platform_device_register(&da850_edma_device); + edma_pdev = platform_device_register_full(&da8xx_edma0_device); + if (IS_ERR(edma_pdev)) { + pr_warn("%s: Failed to register eDMA0\n", __func__); + return PTR_ERR(edma_pdev); + } + edma_pdev = platform_device_register_full(&da850_edma1_device); + return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0; } static struct resource da8xx_i2c_resources0[] = { diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 567dc56fe8cd..609950b8c191 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -569,61 +569,58 @@ static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ -static s8 -queue_priority_mapping[][2] = { +static s8 queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, {1, 7}, {-1, -1}, }; -static struct edma_soc_info edma_cc0_info = { +static struct edma_soc_info dm355_edma_pdata = { .queue_priority_mapping = queue_priority_mapping, .default_queue = EVENTQ_1, }; -static struct edma_soc_info *dm355_edma_info[EDMA_MAX_CC] = { - &edma_cc0_info, -}; - static struct resource edma_resources[] = { { - .name = "edma_cc0", + .name = "edma3_cc", .start = 0x01c00000, .end = 0x01c00000 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc0", + .name = "edma3_tc0", .start = 0x01c10000, .end = 0x01c10000 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc1", + .name = "edma3_tc1", .start = 0x01c10400, .end = 0x01c10400 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma0", + .name = "edma3_ccint", .start = IRQ_CCINT0, .flags = IORESOURCE_IRQ, }, { - .name = "edma0_err", + .name = "edma3_ccerrint", .start = IRQ_CCERRINT, .flags = IORESOURCE_IRQ, }, /* not using (or muxing) TC*_ERR */ }; -static struct platform_device dm355_edma_device = { - .name = "edma", - .id = 0, - .dev.platform_data = dm355_edma_info, - .num_resources = ARRAY_SIZE(edma_resources), - .resource = edma_resources, +static const struct platform_device_info dm355_edma_device __initconst = { + .name = "edma", + .id = 0, + .dma_mask = DMA_BIT_MASK(32), + .res = edma_resources, + .num_res = ARRAY_SIZE(edma_resources), + .data = &dm355_edma_pdata, + .size_data = sizeof(dm355_edma_pdata), }; static struct resource dm355_asp1_resources[] = { @@ -1062,13 +1059,18 @@ int __init dm355_init_video(struct vpfe_config *vpfe_cfg, static int __init dm355_init_devices(void) { + struct platform_device *edma_pdev; int ret = 0; if (!cpu_is_davinci_dm355()) return 0; davinci_cfg_reg(DM355_INT_EDMA_CC); - platform_device_register(&dm355_edma_device); + edma_pdev = platform_device_register_full(&dm355_edma_device); + if (IS_ERR(edma_pdev)) { + pr_warn("%s: Failed to register eDMA\n", __func__); + return PTR_ERR(edma_pdev); + } ret = davinci_init_wdt(); if (ret) diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 6a890a8486d0..2068cbeaeb03 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -853,8 +853,7 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { }; /* Four Transfer Controllers on DM365 */ -static s8 -dm365_queue_priority_mapping[][2] = { +static s8 dm365_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 7}, {1, 7}, @@ -863,53 +862,49 @@ dm365_queue_priority_mapping[][2] = { {-1, -1}, }; -static struct edma_soc_info edma_cc0_info = { +static struct edma_soc_info dm365_edma_pdata = { .queue_priority_mapping = dm365_queue_priority_mapping, .default_queue = EVENTQ_3, }; -static struct edma_soc_info *dm365_edma_info[EDMA_MAX_CC] = { - &edma_cc0_info, -}; - static struct resource edma_resources[] = { { - .name = "edma_cc0", + .name = "edma3_cc", .start = 0x01c00000, .end = 0x01c00000 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc0", + .name = "edma3_tc0", .start = 0x01c10000, .end = 0x01c10000 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc1", + .name = "edma3_tc1", .start = 0x01c10400, .end = 0x01c10400 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc2", + .name = "edma3_tc2", .start = 0x01c10800, .end = 0x01c10800 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc3", + .name = "edma3_tc3", .start = 0x01c10c00, .end = 0x01c10c00 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma0", + .name = "edma3_ccint", .start = IRQ_CCINT0, .flags = IORESOURCE_IRQ, }, { - .name = "edma0_err", + .name = "edma3_ccerrint", .start = IRQ_CCERRINT, .flags = IORESOURCE_IRQ, }, @@ -919,7 +914,7 @@ static struct resource edma_resources[] = { static struct platform_device dm365_edma_device = { .name = "edma", .id = 0, - .dev.platform_data = dm365_edma_info, + .dev.platform_data = &dm365_edma_pdata, .num_resources = ARRAY_SIZE(edma_resources), .resource = edma_resources, }; diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index dc52657909c4..d38f5049d56e 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -498,61 +498,58 @@ static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ -static s8 -queue_priority_mapping[][2] = { +static s8 queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, {1, 7}, {-1, -1}, }; -static struct edma_soc_info edma_cc0_info = { +static struct edma_soc_info dm644x_edma_pdata = { .queue_priority_mapping = queue_priority_mapping, .default_queue = EVENTQ_1, }; -static struct edma_soc_info *dm644x_edma_info[EDMA_MAX_CC] = { - &edma_cc0_info, -}; - static struct resource edma_resources[] = { { - .name = "edma_cc0", + .name = "edma3_cc", .start = 0x01c00000, .end = 0x01c00000 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc0", + .name = "edma3_tc0", .start = 0x01c10000, .end = 0x01c10000 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc1", + .name = "edma3_tc1", .start = 0x01c10400, .end = 0x01c10400 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma0", + .name = "edma3_ccint", .start = IRQ_CCINT0, .flags = IORESOURCE_IRQ, }, { - .name = "edma0_err", + .name = "edma3_ccerrint", .start = IRQ_CCERRINT, .flags = IORESOURCE_IRQ, }, /* not using TC*_ERR */ }; -static struct platform_device dm644x_edma_device = { - .name = "edma", - .id = 0, - .dev.platform_data = dm644x_edma_info, - .num_resources = ARRAY_SIZE(edma_resources), - .resource = edma_resources, +static const struct platform_device_info dm644x_edma_device __initconst = { + .name = "edma", + .id = 0, + .dma_mask = DMA_BIT_MASK(32), + .res = edma_resources, + .num_res = ARRAY_SIZE(edma_resources), + .data = &dm644x_edma_pdata, + .size_data = sizeof(dm644x_edma_pdata), }; /* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */ @@ -950,12 +947,17 @@ int __init dm644x_init_video(struct vpfe_config *vpfe_cfg, static int __init dm644x_init_devices(void) { + struct platform_device *edma_pdev; int ret = 0; if (!cpu_is_davinci_dm644x()) return 0; - platform_device_register(&dm644x_edma_device); + edma_pdev = platform_device_register_full(&dm644x_edma_device); + if (IS_ERR(edma_pdev)) { + pr_warn("%s: Failed to register eDMA\n", __func__); + return PTR_ERR(edma_pdev); + } platform_device_register(&dm644x_mdio_device); platform_device_register(&dm644x_emac_device); diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 3f842bb266d6..70eb42725eec 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -531,8 +531,7 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ /* Four Transfer Controllers on DM646x */ -static s8 -dm646x_queue_priority_mapping[][2] = { +static s8 dm646x_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 4}, {1, 0}, @@ -541,65 +540,63 @@ dm646x_queue_priority_mapping[][2] = { {-1, -1}, }; -static struct edma_soc_info edma_cc0_info = { +static struct edma_soc_info dm646x_edma_pdata = { .queue_priority_mapping = dm646x_queue_priority_mapping, .default_queue = EVENTQ_1, }; -static struct edma_soc_info *dm646x_edma_info[EDMA_MAX_CC] = { - &edma_cc0_info, -}; - static struct resource edma_resources[] = { { - .name = "edma_cc0", + .name = "edma3_cc", .start = 0x01c00000, .end = 0x01c00000 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc0", + .name = "edma3_tc0", .start = 0x01c10000, .end = 0x01c10000 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc1", + .name = "edma3_tc1", .start = 0x01c10400, .end = 0x01c10400 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc2", + .name = "edma3_tc2", .start = 0x01c10800, .end = 0x01c10800 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc3", + .name = "edma3_tc3", .start = 0x01c10c00, .end = 0x01c10c00 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma0", + .name = "edma3_ccint", .start = IRQ_CCINT0, .flags = IORESOURCE_IRQ, }, { - .name = "edma0_err", + .name = "edma3_ccerrint", .start = IRQ_CCERRINT, .flags = IORESOURCE_IRQ, }, /* not using TC*_ERR */ }; -static struct platform_device dm646x_edma_device = { - .name = "edma", - .id = 0, - .dev.platform_data = dm646x_edma_info, - .num_resources = ARRAY_SIZE(edma_resources), - .resource = edma_resources, +static const struct platform_device_info dm646x_edma_device __initconst = { + .name = "edma", + .id = 0, + .dma_mask = DMA_BIT_MASK(32), + .res = edma_resources, + .num_res = ARRAY_SIZE(edma_resources), + .data = &dm646x_edma_pdata, + .size_data = sizeof(dm646x_edma_pdata), }; static struct resource dm646x_mcasp0_resources[] = { @@ -936,9 +933,12 @@ void dm646x_setup_vpif(struct vpif_display_config *display_config, int __init dm646x_init_edma(struct edma_rsv_info *rsv) { - edma_cc0_info.rsv = rsv; + struct platform_device *edma_pdev; + + dm646x_edma_pdata.rsv = rsv; - return platform_device_register(&dm646x_edma_device); + edma_pdev = platform_device_register_full(&dm646x_edma_device); + return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0; } void __init dm646x_init(void) diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c index 9bdf54795f05..56978199c479 100644 --- a/arch/arm/mach-exynos/mcpm-exynos.c +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -20,6 +20,7 @@ #include <asm/cputype.h> #include <asm/cp15.h> #include <asm/mcpm.h> +#include <asm/smp_plat.h> #include "regs-pmu.h" #include "common.h" @@ -70,7 +71,31 @@ static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster) cluster >= EXYNOS5420_NR_CLUSTERS) return -EINVAL; - exynos_cpu_power_up(cpunr); + if (!exynos_cpu_power_state(cpunr)) { + exynos_cpu_power_up(cpunr); + + /* + * This assumes the cluster number of the big cores(Cortex A15) + * is 0 and the Little cores(Cortex A7) is 1. + * When the system was booted from the Little core, + * they should be reset during power up cpu. + */ + if (cluster && + cluster == MPIDR_AFFINITY_LEVEL(cpu_logical_map(0), 1)) { + /* + * Before we reset the Little cores, we should wait + * the SPARE2 register is set to 1 because the init + * codes of the iROM will set the register after + * initialization. + */ + while (!pmu_raw_readl(S5P_PMU_SPARE2)) + udelay(10); + + pmu_raw_writel(EXYNOS5420_KFC_CORE_RESET(cpu), + EXYNOS_SWRESET); + } + } + return 0; } diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 4a87e86dec45..7c21760f590f 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -200,15 +200,15 @@ no_clk: args.args_count = 0; child_domain = of_genpd_get_from_provider(&args); if (IS_ERR(child_domain)) - goto next_pd; + continue; if (of_parse_phandle_with_args(np, "power-domains", "#power-domain-cells", 0, &args) != 0) - goto next_pd; + continue; parent_domain = of_genpd_get_from_provider(&args); if (IS_ERR(parent_domain)) - goto next_pd; + continue; if (pm_genpd_add_subdomain(parent_domain, child_domain)) pr_warn("%s failed to add subdomain: %s\n", @@ -216,8 +216,6 @@ no_clk: else pr_info("%s has as child subdomain: %s.\n", parent_domain->name, child_domain->name); -next_pd: - of_node_put(np); } return 0; diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h index b7614333d296..fba9068ed260 100644 --- a/arch/arm/mach-exynos/regs-pmu.h +++ b/arch/arm/mach-exynos/regs-pmu.h @@ -513,6 +513,12 @@ static inline unsigned int exynos_pmu_cpunr(unsigned int mpidr) #define SPREAD_ENABLE 0xF #define SPREAD_USE_STANDWFI 0xF +#define EXYNOS5420_KFC_CORE_RESET0 BIT(8) +#define EXYNOS5420_KFC_ETM_RESET0 BIT(20) + +#define EXYNOS5420_KFC_CORE_RESET(_nr) \ + ((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr)) + #define EXYNOS5420_BB_CON1 0x0784 #define EXYNOS5420_BB_SEL_EN BIT(31) #define EXYNOS5420_BB_PMOS_EN BIT(7) diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index e00eb39453a4..c169cc3049aa 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -19,6 +19,7 @@ #include <linux/cpu_pm.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/irqdomain.h> #include <linux/of_address.h> #include <linux/err.h> @@ -177,54 +178,57 @@ static struct irq_chip exynos_pmu_chip = { #endif }; -static int exynos_pmu_domain_xlate(struct irq_domain *domain, - struct device_node *controller, - const u32 *intspec, - unsigned int intsize, - unsigned long *out_hwirq, - unsigned int *out_type) +static int exynos_pmu_domain_translate(struct irq_domain *d, + struct irq_fwspec *fwspec, + unsigned long *hwirq, + unsigned int *type) { - if (domain->of_node != controller) - return -EINVAL; /* Shouldn't happen, really... */ - if (intsize != 3) - return -EINVAL; /* Not GIC compliant */ - if (intspec[0] != 0) - return -EINVAL; /* No PPI should point to this domain */ + if (is_of_node(fwspec->fwnode)) { + if (fwspec->param_count != 3) + return -EINVAL; - *out_hwirq = intspec[1]; - *out_type = intspec[2]; - return 0; + /* No PPI should point to this domain */ + if (fwspec->param[0] != 0) + return -EINVAL; + + *hwirq = fwspec->param[1]; + *type = fwspec->param[2]; + return 0; + } + + return -EINVAL; } static int exynos_pmu_domain_alloc(struct irq_domain *domain, unsigned int virq, unsigned int nr_irqs, void *data) { - struct of_phandle_args *args = data; - struct of_phandle_args parent_args; + struct irq_fwspec *fwspec = data; + struct irq_fwspec parent_fwspec; irq_hw_number_t hwirq; int i; - if (args->args_count != 3) + if (fwspec->param_count != 3) return -EINVAL; /* Not GIC compliant */ - if (args->args[0] != 0) + if (fwspec->param[0] != 0) return -EINVAL; /* No PPI should point to this domain */ - hwirq = args->args[1]; + hwirq = fwspec->param[1]; for (i = 0; i < nr_irqs; i++) irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i, &exynos_pmu_chip, NULL); - parent_args = *args; - parent_args.np = domain->parent->of_node; - return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &parent_args); + parent_fwspec = *fwspec; + parent_fwspec.fwnode = domain->parent->fwnode; + return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, + &parent_fwspec); } static const struct irq_domain_ops exynos_pmu_domain_ops = { - .xlate = exynos_pmu_domain_xlate, - .alloc = exynos_pmu_domain_alloc, - .free = irq_domain_free_irqs_common, + .translate = exynos_pmu_domain_translate, + .alloc = exynos_pmu_domain_alloc, + .free = irq_domain_free_irqs_common, }; static int __init exynos_pmu_irq_init(struct device_node *node, @@ -262,7 +266,7 @@ static int __init exynos_pmu_irq_init(struct device_node *node, return 0; } -#define EXYNOS_PMU_IRQ(symbol, name) OF_DECLARE_2(irqchip, symbol, name, exynos_pmu_irq_init) +#define EXYNOS_PMU_IRQ(symbol, name) IRQCHIP_DECLARE(symbol, name, exynos_pmu_irq_init) EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu"); EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu"); diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c index ca8a25bb3521..18b12796acf9 100644 --- a/arch/arm/mach-gemini/board-nas4220b.c +++ b/arch/arm/mach-gemini/board-nas4220b.c @@ -18,7 +18,6 @@ #include <linux/leds.h> #include <linux/input.h> #include <linux/gpio_keys.h> -#include <linux/mdio-gpio.h> #include <linux/io.h> #include <asm/setup.h> diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c index 418188cd1712..14c56f3f0ec2 100644 --- a/arch/arm/mach-gemini/board-wbd111.c +++ b/arch/arm/mach-gemini/board-wbd111.c @@ -15,7 +15,6 @@ #include <linux/input.h> #include <linux/skbuff.h> #include <linux/gpio_keys.h> -#include <linux/mdio-gpio.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c index 266b265090cd..6070282ce243 100644 --- a/arch/arm/mach-gemini/board-wbd222.c +++ b/arch/arm/mach-gemini/board-wbd222.c @@ -15,7 +15,6 @@ #include <linux/input.h> #include <linux/skbuff.h> #include <linux/gpio_keys.h> -#include <linux/mdio-gpio.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 8c4467fad837..8e7976a4c3e7 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -14,6 +14,7 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> @@ -181,40 +182,42 @@ static struct irq_chip imx_gpc_chip = { #endif }; -static int imx_gpc_domain_xlate(struct irq_domain *domain, - struct device_node *controller, - const u32 *intspec, - unsigned int intsize, - unsigned long *out_hwirq, - unsigned int *out_type) +static int imx_gpc_domain_translate(struct irq_domain *d, + struct irq_fwspec *fwspec, + unsigned long *hwirq, + unsigned int *type) { - if (domain->of_node != controller) - return -EINVAL; /* Shouldn't happen, really... */ - if (intsize != 3) - return -EINVAL; /* Not GIC compliant */ - if (intspec[0] != 0) - return -EINVAL; /* No PPI should point to this domain */ + if (is_of_node(fwspec->fwnode)) { + if (fwspec->param_count != 3) + return -EINVAL; - *out_hwirq = intspec[1]; - *out_type = intspec[2]; - return 0; + /* No PPI should point to this domain */ + if (fwspec->param[0] != 0) + return -EINVAL; + + *hwirq = fwspec->param[1]; + *type = fwspec->param[2]; + return 0; + } + + return -EINVAL; } static int imx_gpc_domain_alloc(struct irq_domain *domain, unsigned int irq, unsigned int nr_irqs, void *data) { - struct of_phandle_args *args = data; - struct of_phandle_args parent_args; + struct irq_fwspec *fwspec = data; + struct irq_fwspec parent_fwspec; irq_hw_number_t hwirq; int i; - if (args->args_count != 3) + if (fwspec->param_count != 3) return -EINVAL; /* Not GIC compliant */ - if (args->args[0] != 0) + if (fwspec->param[0] != 0) return -EINVAL; /* No PPI should point to this domain */ - hwirq = args->args[1]; + hwirq = fwspec->param[1]; if (hwirq >= GPC_MAX_IRQS) return -EINVAL; /* Can't deal with this */ @@ -222,15 +225,16 @@ static int imx_gpc_domain_alloc(struct irq_domain *domain, irq_domain_set_hwirq_and_chip(domain, irq + i, hwirq + i, &imx_gpc_chip, NULL); - parent_args = *args; - parent_args.np = domain->parent->of_node; - return irq_domain_alloc_irqs_parent(domain, irq, nr_irqs, &parent_args); + parent_fwspec = *fwspec; + parent_fwspec.fwnode = domain->parent->fwnode; + return irq_domain_alloc_irqs_parent(domain, irq, nr_irqs, + &parent_fwspec); } static const struct irq_domain_ops imx_gpc_domain_ops = { - .xlate = imx_gpc_domain_xlate, - .alloc = imx_gpc_domain_alloc, - .free = irq_domain_free_irqs_common, + .translate = imx_gpc_domain_translate, + .alloc = imx_gpc_domain_alloc, + .free = irq_domain_free_irqs_common, }; static int __init imx_gpc_init(struct device_node *node, @@ -268,12 +272,7 @@ static int __init imx_gpc_init(struct device_node *node, return 0; } - -/* - * We cannot use the IRQCHIP_DECLARE macro that lives in - * drivers/irqchip, so we're forced to roll our own. Not very nice. - */ -OF_DECLARE_2(irqchip, imx_gpc, "fsl,imx6q-gpc", imx_gpc_init); +IRQCHIP_DECLARE(imx_gpc, "fsl,imx6q-gpc", imx_gpc_init); void __init imx_gpc_check_dt(void) { diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 9602cc12d2f1..3878494bd118 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -350,7 +350,7 @@ static void __init imx6q_opp_init(void) return; } - if (of_init_opp_table(cpu_dev)) { + if (dev_pm_opp_of_add_table(cpu_dev)) { pr_warn("failed to init OPP table\n"); goto put_node; } diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c index 19dc738c1abc..d019a080a559 100644 --- a/arch/arm/mach-mediatek/mediatek.c +++ b/arch/arm/mach-mediatek/mediatek.c @@ -40,7 +40,7 @@ static void __init mediatek_timer_init(void) } of_clk_init(NULL); - clocksource_of_init(); + clocksource_probe(); }; static const char * const mediatek_board_dt_compat[] = { diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index c86a5a0aefac..e20fc4178b15 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -117,11 +117,4 @@ config MACH_KIRKWOOD Say 'Y' here if you want your kernel to support boards based on the Marvell Kirkwood device tree. -config MACH_NETXBIG - bool "LaCie 2Big and 5Big Network v2" - depends on MACH_KIRKWOOD - help - Say 'Y' here if you want your kernel to support the - LaCie 2Big and 5Big Network v2 - endif diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index b4f01497ce0b..ecf9e0c3b107 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -13,4 +13,3 @@ endif obj-$(CONFIG_MACH_DOVE) += dove.o obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o -obj-$(CONFIG_MACH_NETXBIG) += netxbig.o diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 9f739f3cad4c..1648edd515a2 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -22,7 +22,6 @@ #include <linux/dma-mapping.h> #include <linux/memblock.h> #include <linux/mbus.h> -#include <linux/signal.h> #include <linux/slab.h> #include <linux/irqchip.h> #include <asm/hardware/cache-l2x0.h> @@ -105,27 +104,6 @@ static void __init mvebu_memblock_reserve(void) static void __init mvebu_memblock_reserve(void) {} #endif -/* - * Early versions of Armada 375 SoC have a bug where the BootROM - * leaves an external data abort pending. The kernel is hit by this - * data abort as soon as it enters userspace, because it unmasks the - * data aborts at this moment. We register a custom abort handler - * below to ignore the first data abort to work around this - * problem. - */ -static int armada_375_external_abort_wa(unsigned long addr, unsigned int fsr, - struct pt_regs *regs) -{ - static int ignore_first; - - if (!ignore_first && fsr == 0x1406) { - ignore_first = 1; - return 0; - } - - return 1; -} - static void __init mvebu_init_irq(void) { irqchip_init(); @@ -134,17 +112,6 @@ static void __init mvebu_init_irq(void) BUG_ON(mvebu_mbus_dt_init(coherency_available())); } -static void __init external_abort_quirk(void) -{ - u32 dev, rev; - - if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV) - return; - - hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0, - "imprecise external abort"); -} - static void __init i2c_quirk(void) { struct device_node *np; @@ -177,8 +144,6 @@ static void __init mvebu_dt_init(void) { if (of_machine_is_compatible("marvell,armadaxp")) i2c_quirk(); - if (of_machine_is_compatible("marvell,a375-db")) - external_abort_quirk(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h deleted file mode 100644 index 98e32cc2ef3d..000000000000 --- a/arch/arm/mach-mvebu/board.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Board functions for Marvell System On Chip - * - * Copyright (C) 2014 - * - * Andrew Lunn <andrew@lunn.ch> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ARCH_MVEBU_BOARD_H -#define __ARCH_MVEBU_BOARD_H - -#ifdef CONFIG_MACH_NETXBIG -void netxbig_init(void); -#else -static inline void netxbig_init(void) {}; -#endif -#endif diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c index 925f75f54268..f9d8e1ea7183 100644 --- a/arch/arm/mach-mvebu/kirkwood.c +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -25,7 +25,6 @@ #include "kirkwood.h" #include "kirkwood-pm.h" #include "common.h" -#include "board.h" static struct resource kirkwood_cpufreq_resources[] = { [0] = { @@ -180,9 +179,6 @@ static void __init kirkwood_dt_init(void) kirkwood_pm_init(); kirkwood_dt_eth_fixup(); - if (of_machine_is_compatible("lacie,netxbig")) - netxbig_init(); - of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL); } diff --git a/arch/arm/mach-mvebu/netxbig.c b/arch/arm/mach-mvebu/netxbig.c deleted file mode 100644 index 94b11b6585a4..000000000000 --- a/arch/arm/mach-mvebu/netxbig.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * arch/arm/mach-mvbu/board-netxbig.c - * - * LaCie 2Big and 5Big Network v2 board setup - * - * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/of.h> -#include <linux/platform_device.h> -#include <linux/platform_data/leds-kirkwood-netxbig.h> -#include "common.h" - -/***************************************************************************** - * GPIO extension LEDs - ****************************************************************************/ - -/* - * The LEDs are controlled by a CPLD and can be configured through a GPIO - * extension bus: - * - * - address register : bit [0-2] -> GPIO [47-49] - * - data register : bit [0-2] -> GPIO [44-46] - * - enable register : GPIO 29 - */ - -static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 }; -static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 }; - -static struct netxbig_gpio_ext netxbig_v2_gpio_ext = { - .addr = netxbig_v2_gpio_ext_addr, - .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr), - .data = netxbig_v2_gpio_ext_data, - .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data), - .enable = 29, -}; - -/* - * Address register selection: - * - * addr | register - * ---------------------------- - * 0 | front LED - * 1 | front LED brightness - * 2 | SATA LED brightness - * 3 | SATA0 LED - * 4 | SATA1 LED - * 5 | SATA2 LED - * 6 | SATA3 LED - * 7 | SATA4 LED - * - * Data register configuration: - * - * data | LED brightness - * ------------------------------------------------- - * 0 | min (off) - * - | - - * 7 | max - * - * data | front LED mode - * ------------------------------------------------- - * 0 | fix off - * 1 | fix blue on - * 2 | fix red on - * 3 | blink blue on=1 sec and blue off=1 sec - * 4 | blink red on=1 sec and red off=1 sec - * 5 | blink blue on=2.5 sec and red on=0.5 sec - * 6 | blink blue on=1 sec and red on=1 sec - * 7 | blink blue on=0.5 sec and blue off=2.5 sec - * - * data | SATA LED mode - * ------------------------------------------------- - * 0 | fix off - * 1 | SATA activity blink - * 2 | fix red on - * 3 | blink blue on=1 sec and blue off=1 sec - * 4 | blink red on=1 sec and red off=1 sec - * 5 | blink blue on=2.5 sec and red on=0.5 sec - * 6 | blink blue on=1 sec and red on=1 sec - * 7 | fix blue on - */ - -static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = { - [NETXBIG_LED_OFF] = 0, - [NETXBIG_LED_ON] = 2, - [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE, - [NETXBIG_LED_TIMER1] = 4, - [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE, -}; - -static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = { - [NETXBIG_LED_OFF] = 0, - [NETXBIG_LED_ON] = 1, - [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE, - [NETXBIG_LED_TIMER1] = 3, - [NETXBIG_LED_TIMER2] = 7, -}; - -static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = { - [NETXBIG_LED_OFF] = 0, - [NETXBIG_LED_ON] = 7, - [NETXBIG_LED_SATA] = 1, - [NETXBIG_LED_TIMER1] = 3, - [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE, -}; - -static struct netxbig_led_timer netxbig_v2_led_timer[] = { - [0] = { - .delay_on = 500, - .delay_off = 500, - .mode = NETXBIG_LED_TIMER1, - }, - [1] = { - .delay_on = 500, - .delay_off = 1000, - .mode = NETXBIG_LED_TIMER2, - }, -}; - -#define NETXBIG_LED(_name, maddr, mval, baddr) \ - { .name = _name, \ - .mode_addr = maddr, \ - .mode_val = mval, \ - .bright_addr = baddr } - -static struct netxbig_led net2big_v2_leds_ctrl[] = { - NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1), - NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1), - NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2), - NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2), -}; - -static struct netxbig_led_platform_data net2big_v2_leds_data = { - .gpio_ext = &netxbig_v2_gpio_ext, - .timer = netxbig_v2_led_timer, - .num_timer = ARRAY_SIZE(netxbig_v2_led_timer), - .leds = net2big_v2_leds_ctrl, - .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl), -}; - -static struct netxbig_led net5big_v2_leds_ctrl[] = { - NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1), - NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1), - NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2), - NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2), - NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2), - NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2), - NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata4", 7, netxbig_v2_red_mled, 2), -}; - -static struct netxbig_led_platform_data net5big_v2_leds_data = { - .gpio_ext = &netxbig_v2_gpio_ext, - .timer = netxbig_v2_led_timer, - .num_timer = ARRAY_SIZE(netxbig_v2_led_timer), - .leds = net5big_v2_leds_ctrl, - .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl), -}; - -static struct platform_device netxbig_v2_leds = { - .name = "leds-netxbig", - .id = -1, - .dev = { - .platform_data = &net2big_v2_leds_data, - }, -}; - -void __init netxbig_init(void) -{ - - if (of_machine_is_compatible("lacie,net5big_v2")) - netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data; - platform_device_register(&netxbig_v2_leds); -} diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index 867ec3385eb5..ed8fda4cd055 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -296,11 +296,11 @@ int armada_370_xp_pmsu_idle_enter(unsigned long deepidle) /* Test the CR_C bit and set it if it was cleared */ asm volatile( "mrc p15, 0, r0, c1, c0, 0 \n\t" - "tst r0, #(1 << 2) \n\t" + "tst r0, %0 \n\t" "orreq r0, r0, #(1 << 2) \n\t" "mcreq p15, 0, r0, c1, c0, 0 \n\t" "isb " - : : : "r0"); + : : "Ir" (CR_C) : "r0"); pr_debug("Failed to suspend the system\n"); diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index cdd05f2e67ee..afb809509140 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -90,13 +90,6 @@ config MACH_OMAP_FSAMPLE Support for TI OMAP 850 F-Sample board. Say Y here if you have such a board. -config MACH_VOICEBLUE - bool "Voiceblue" - depends on ARCH_OMAP1 && ARCH_OMAP15XX - help - Support for Voiceblue GSM/VoIP gateway. Say Y here if you have - such a board. - config MACH_OMAP_PALMTE bool "Palm Tungsten E" depends on ARCH_OMAP1 && ARCH_OMAP15XX diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 3889b6cd211e..0e8ea95ea822 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -37,7 +37,6 @@ obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o board-nand.o obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o \ board-nand.o -obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c deleted file mode 100644 index e960687d0cb1..000000000000 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * linux/arch/arm/mach-omap1/board-voiceblue.c - * - * Modified from board-generic.c - * - * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz> - * - * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/mtd/physmap.h> -#include <linux/notifier.h> -#include <linux/reboot.h> -#include <linux/serial_8250.h> -#include <linux/serial_reg.h> -#include <linux/smc91x.h> -#include <linux/export.h> -#include <linux/reboot.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/board-voiceblue.h> -#include <mach/flash.h> -#include <mach/mux.h> -#include <mach/tc.h> - -#include <mach/hardware.h> -#include <mach/usb.h> - -#include "common.h" - -static struct plat_serial8250_port voiceblue_ports[] = { - { - .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000), - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 1, - .uartclk = 3686400, - }, - { - .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000), - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 1, - .uartclk = 3686400, - }, - { - .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000), - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 1, - .uartclk = 3686400, - }, - { - .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000), - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 1, - .uartclk = 3686400, - }, - { }, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM1, -}; - -static int __init ext_uart_init(void) -{ - if (!machine_is_voiceblue()) - return -ENODEV; - - voiceblue_ports[0].irq = gpio_to_irq(12); - voiceblue_ports[1].irq = gpio_to_irq(13); - voiceblue_ports[2].irq = gpio_to_irq(14); - voiceblue_ports[3].irq = gpio_to_irq(15); - serial_device.dev.platform_data = voiceblue_ports; - return platform_device_register(&serial_device); -} -arch_initcall(ext_uart_init); - -static struct physmap_flash_data voiceblue_flash_data = { - .width = 2, - .set_vpp = omap1_set_vpp, -}; - -static struct resource voiceblue_flash_resource = { - .start = OMAP_CS0_PHYS, - .end = OMAP_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device voiceblue_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &voiceblue_flash_data, - }, - .num_resources = 1, - .resource = &voiceblue_flash_resource, -}; - -static struct smc91x_platdata voiceblue_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource voiceblue_smc91x_resources[] = { - [0] = { - .start = OMAP_CS2_PHYS + 0x300, - .end = OMAP_CS2_PHYS + 0x300 + 16, - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct platform_device voiceblue_smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &voiceblue_smc91x_info, - }, - .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources), - .resource = voiceblue_smc91x_resources, -}; - -static struct platform_device *voiceblue_devices[] __initdata = { - &voiceblue_flash_device, - &voiceblue_smc91x_device, -}; - -static struct omap_usb_config voiceblue_usb_config __initdata = { - .hmc_mode = 3, - .register_host = 1, - .register_dev = 1, - .pins[0] = 2, - .pins[1] = 6, - .pins[2] = 6, -}; - -#define MACHINE_PANICED 1 -#define MACHINE_REBOOTING 2 -#define MACHINE_REBOOT 4 -static unsigned long machine_state; - -static int panic_event(struct notifier_block *this, unsigned long event, - void *ptr) -{ - if (test_and_set_bit(MACHINE_PANICED, &machine_state)) - return NOTIFY_DONE; - - /* Flash power LED */ - omap_writeb(0x78, OMAP_LPG1_LCR); - omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */ - - return NOTIFY_DONE; -} - -static struct notifier_block panic_block = { - .notifier_call = panic_event, -}; - -static int __init voiceblue_setup(void) -{ - if (!machine_is_voiceblue()) - return -ENODEV; - - /* Setup panic notifier */ - atomic_notifier_chain_register(&panic_notifier_list, &panic_block); - - return 0; -} -postcore_initcall(voiceblue_setup); - -static int wdt_gpio_state; - -void voiceblue_wdt_enable(void) -{ - gpio_direction_output(0, 0); - gpio_set_value(0, 1); - gpio_set_value(0, 0); - wdt_gpio_state = 0; -} - -void voiceblue_wdt_disable(void) -{ - gpio_set_value(0, 0); - gpio_set_value(0, 1); - gpio_set_value(0, 0); - gpio_direction_input(0); -} - -void voiceblue_wdt_ping(void) -{ - if (test_bit(MACHINE_REBOOT, &machine_state)) - return; - - wdt_gpio_state = !wdt_gpio_state; - gpio_set_value(0, wdt_gpio_state); -} - -static void voiceblue_restart(enum reboot_mode mode, const char *cmd) -{ - /* - * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 - * "Global Software Reset Affects Traffic Controller Frequency". - */ - if (cpu_is_omap5912()) { - omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL); - omap_writew(0x8, ARM_RSTCT1); - } - - set_bit(MACHINE_REBOOT, &machine_state); - voiceblue_wdt_enable(); - while (1) ; -} - -EXPORT_SYMBOL(voiceblue_wdt_enable); -EXPORT_SYMBOL(voiceblue_wdt_disable); -EXPORT_SYMBOL(voiceblue_wdt_ping); - -static void __init voiceblue_init(void) -{ - /* mux pins for uarts */ - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - - /* Watchdog */ - gpio_request(0, "Watchdog"); - /* smc91x reset */ - gpio_request(7, "SMC91x reset"); - gpio_direction_output(7, 1); - udelay(2); /* wait at least 100ns */ - gpio_set_value(7, 0); - mdelay(50); /* 50ms until PHY ready */ - /* smc91x interrupt pin */ - gpio_request(8, "SMC91x irq"); - /* 16C554 reset*/ - gpio_request(6, "16C554 reset"); - gpio_direction_output(6, 0); - /* 16C554 interrupt pins */ - gpio_request(12, "16C554 irq"); - gpio_request(13, "16C554 irq"); - gpio_request(14, "16C554 irq"); - gpio_request(15, "16C554 irq"); - irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING); - irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); - irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING); - irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING); - - voiceblue_smc91x_resources[1].start = gpio_to_irq(8); - voiceblue_smc91x_resources[1].end = gpio_to_irq(8); - platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); - omap_serial_init(); - omap1_usb_init(&voiceblue_usb_config); - omap_register_i2c_bus(1, 100, NULL, 0); - - /* There is a good chance board is going up, so enable power LED - * (it is connected through invertor) */ - omap_writeb(0x00, OMAP_LPG1_LCR); - omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ -} - -MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") - /* Maintainer: Ladislav Michl <michl@2n.cz> */ - .atag_offset = 0x100, - .map_io = omap15xx_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = voiceblue_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = voiceblue_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/include/mach/board-voiceblue.h b/arch/arm/mach-omap1/include/mach/board-voiceblue.h deleted file mode 100644 index 27916b210f57..000000000000 --- a/arch/arm/mach-omap1/include/mach/board-voiceblue.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz> - * - * Hardware definitions for OMAP5910 based VoiceBlue board. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_VOICEBLUE_H -#define __ASM_ARCH_VOICEBLUE_H - -extern void voiceblue_wdt_enable(void); -extern void voiceblue_wdt_disable(void); -extern void voiceblue_wdt_ping(void); - -#endif /* __ASM_ARCH_VOICEBLUE_H */ - diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b3a0dff67e3f..5076d3f334d2 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -49,6 +49,7 @@ config SOC_OMAP5 select OMAP_INTERCONNECT select OMAP_INTERCONNECT_BARRIER select PM_OPP if PM + select ZONE_DMA if ARM_LPAE config SOC_AM33XX bool "TI AM33XX" @@ -78,6 +79,7 @@ config SOC_DRA7XX select OMAP_INTERCONNECT select OMAP_INTERCONNECT_BARRIER select PM_OPP if PM + select ZONE_DMA if ARM_LPAE config ARCH_OMAP2PLUS bool @@ -94,8 +96,8 @@ config ARCH_OMAP2PLUS select OMAP_GPMC select PINCTRL select SOC_BUS - select TI_PRIV_EDMA select OMAP_IRQCHIP + select CLKSRC_TI_32K help Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 935869698cbc..ceefcee6bb85 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -48,11 +48,9 @@ AFLAGS_sleep44xx.o :=-Wa,-march=armv7-a$(plus_sec) # Functions loaded to SRAM obj-$(CONFIG_SOC_OMAP2420) += sram242x.o obj-$(CONFIG_SOC_OMAP2430) += sram243x.o -obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o AFLAGS_sram242x.o :=-Wa,-march=armv6 AFLAGS_sram243x.o :=-Wa,-march=armv6 -AFLAGS_sram34xx.o :=-Wa,-march=armv7-a # Restart code (OMAP4/5 currently in omap4-common.c) obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o @@ -186,7 +184,6 @@ obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) -obj-$(CONFIG_ARCH_OMAP3) += clkt34xx_dpll3m2.o obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) obj-$(CONFIG_SOC_AM33XX) += $(clock-common) obj-$(CONFIG_SOC_OMAP5) += $(clock-common) diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 6133eaac685d..04a56cc04dfa 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -46,7 +46,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_machine = omap_generic_init, - .init_time = omap2_sync32k_timer_init, + .init_time = omap_init_time, .dt_compat = omap242x_boards_compat, .restart = omap2xxx_restart, MACHINE_END @@ -63,7 +63,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)") .map_io = omap243x_map_io, .init_early = omap2430_init_early, .init_machine = omap_generic_init, - .init_time = omap2_sync32k_timer_init, + .init_time = omap_init_time, .dt_compat = omap243x_boards_compat, .restart = omap2xxx_restart, MACHINE_END @@ -82,7 +82,7 @@ DT_MACHINE_START(OMAP3_N900_DT, "Nokia RX-51 board") .init_early = omap3430_init_early, .init_machine = omap_generic_init, .init_late = omap3_init_late, - .init_time = omap3_sync32k_timer_init, + .init_time = omap_init_time, .dt_compat = n900_boards_compat, .restart = omap3xxx_restart, MACHINE_END @@ -100,12 +100,13 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .init_early = omap3430_init_early, .init_machine = omap_generic_init, .init_late = omap3_init_late, - .init_time = omap3_sync32k_timer_init, + .init_time = omap_init_time, .dt_compat = omap3_boards_compat, .restart = omap3xxx_restart, MACHINE_END static const char *const omap36xx_boards_compat[] __initconst = { + "ti,omap3630", "ti,omap36xx", NULL, }; @@ -116,7 +117,7 @@ DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)") .init_early = omap3630_init_early, .init_machine = omap_generic_init, .init_late = omap3_init_late, - .init_time = omap3_sync32k_timer_init, + .init_time = omap_init_time, .dt_compat = omap36xx_boards_compat, .restart = omap3xxx_restart, MACHINE_END @@ -243,6 +244,9 @@ static const char *const omap5_boards_compat[] __initconst = { }; DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)") +#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE) + .dma_zone_size = SZ_2G, +#endif .reserve = omap_reserve, .smp = smp_ops(omap4_smp_ops), .map_io = omap5_map_io, @@ -272,7 +276,7 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)") .init_late = am43xx_init_late, .init_irq = omap_gic_of_init, .init_machine = omap_generic_init, - .init_time = omap3_gptimer_timer_init, + .init_time = omap4_local_timer_init, .dt_compat = am43_boards_compat, .restart = omap44xx_restart, MACHINE_END @@ -288,6 +292,9 @@ static const char *const dra74x_boards_compat[] __initconst = { }; DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)") +#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE) + .dma_zone_size = SZ_2G, +#endif .reserve = omap_reserve, .smp = smp_ops(omap4_smp_ops), .map_io = dra7xx_map_io, @@ -308,6 +315,9 @@ static const char *const dra72x_boards_compat[] __initconst = { }; DT_MACHINE_START(DRA72X_DT, "Generic DRA72X (Flattened Device Tree)") +#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE) + .dma_zone_size = SZ_2G, +#endif .reserve = omap_reserve, .map_io = dra7xx_map_io, .init_early = dra7xx_init_early, diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index c2975af4cd5d..d9c3ffc39329 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -424,6 +424,6 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board") .init_irq = omap3_init_irq, .init_machine = omap_ldp_init, .init_late = omap3430_init_late, - .init_time = omap3_sync32k_timer_init, + .init_time = omap_init_time, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 2d1e5a6beb85..41161ca97d74 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -136,6 +136,6 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") .init_irq = omap3_init_irq, .init_machine = rx51_init, .init_late = omap3430_init_late, - .init_time = omap3_sync32k_timer_init, + .init_time = omap_init_time, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c deleted file mode 100644 index 3f6521313c93..000000000000 --- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * OMAP34xx M2 divider clock code - * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2010 Nokia Corporation - * - * Paul Walmsley - * Jouni Högander - * - * Parts of this code are based on code written by - * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include "clock.h" -#include "clock3xxx.h" -#include "sdrc.h" -#include "sram.h" - -#define CYCLES_PER_MHZ 1000000 - -struct clk *sdrc_ick_p, *arm_fck_p; - -/* - * CORE DPLL (DPLL3) M2 divider rate programming functions - * - * These call into SRAM code to do the actual CM writes, since the SDRAM - * is clocked from DPLL3. - */ - -/** - * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider - * @clk: struct clk * of DPLL to set - * @rate: rounded target rate - * - * Program the DPLL M2 divider with the rounded target rate. Returns - * -EINVAL upon error, or 0 upon success. - */ -int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - u32 new_div = 0; - u32 unlock_dll = 0; - u32 c; - unsigned long validrate, sdrcrate, _mpurate; - struct omap_sdrc_params *sdrc_cs0; - struct omap_sdrc_params *sdrc_cs1; - int ret; - unsigned long clkrate; - - if (!clk || !rate) - return -EINVAL; - - new_div = DIV_ROUND_UP(parent_rate, rate); - validrate = parent_rate / new_div; - - if (validrate != rate) - return -EINVAL; - - sdrcrate = clk_get_rate(sdrc_ick_p); - clkrate = clk_hw_get_rate(hw); - if (rate > clkrate) - sdrcrate <<= ((rate / clkrate) >> 1); - else - sdrcrate >>= ((clkrate / rate) >> 1); - - ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1); - if (ret) - return -EINVAL; - - if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) { - pr_debug("clock: will unlock SDRC DLL\n"); - unlock_dll = 1; - } - - /* - * XXX This only needs to be done when the CPU frequency changes - */ - _mpurate = clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ; - c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT; - c += 1; /* for safety */ - c *= SDRC_MPURATE_LOOPS; - c >>= SDRC_MPURATE_SCALE; - if (c == 0) - c = 1; - - pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", - clkrate, validrate); - pr_debug("clock: SDRC CS0 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", - sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, - sdrc_cs0->actim_ctrlb, sdrc_cs0->mr); - if (sdrc_cs1) - pr_debug("clock: SDRC CS1 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", - sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, - sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); - - if (sdrc_cs1) - omap3_configure_core_dpll( - new_div, unlock_dll, c, rate > clkrate, - sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, - sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, - sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, - sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); - else - omap3_configure_core_dpll( - new_div, unlock_dll, c, rate > clkrate, - sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, - sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, - 0, 0, 0, 0); - return 0; -} - diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 92e92cfc2775..0cba9575d2ca 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -88,8 +88,7 @@ static inline int omap_mux_late_init(void) extern void omap2_init_common_infrastructure(void); -extern void omap2_sync32k_timer_init(void); -extern void omap3_sync32k_timer_init(void); +extern void omap_init_time(void); extern void omap3_secure_sync32k_timer_init(void); extern void omap3_gptimer_timer_init(void); extern void omap4_local_timer_init(void); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index a69bd67e9028..9374da313e8e 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -33,7 +33,6 @@ #include "common.h" #include "mux.h" #include "control.h" -#include "devices.h" #include "display.h" #define L3_MODULES_MAX_LEN 12 @@ -67,58 +66,6 @@ static int __init omap3_l3_init(void) } omap_postcore_initcall(omap3_l3_init); -#if defined(CONFIG_IOMMU_API) - -#include <linux/platform_data/iommu-omap.h> - -static struct resource omap3isp_resources[] = { - { - .start = OMAP3430_ISP_BASE, - .end = OMAP3430_ISP_BASE + 0x12fc, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP3430_ISP_BASE2, - .end = OMAP3430_ISP_BASE2 + 0x0600, - .flags = IORESOURCE_MEM, - }, - { - .start = 24 + OMAP_INTC_START, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device omap3isp_device = { - .name = "omap3isp", - .id = -1, - .num_resources = ARRAY_SIZE(omap3isp_resources), - .resource = omap3isp_resources, -}; - -static struct omap_iommu_arch_data omap3_isp_iommu = { - .name = "mmu_isp", -}; - -int omap3_init_camera(struct isp_platform_data *pdata) -{ - if (of_have_populated_dt()) - omap3_isp_iommu.name = "480bd400.mmu"; - - omap3isp_device.dev.platform_data = pdata; - omap3isp_device.dev.archdata.iommu = &omap3_isp_iommu; - - return platform_device_register(&omap3isp_device); -} - -#else /* !CONFIG_IOMMU_API */ - -int omap3_init_camera(struct isp_platform_data *pdata) -{ - return 0; -} - -#endif - #if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE) static inline void __init omap_init_mbox(void) { diff --git a/arch/arm/mach-omap2/devices.h b/arch/arm/mach-omap2/devices.h deleted file mode 100644 index f61eb6e5d136..000000000000 --- a/arch/arm/mach-omap2/devices.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-omap2/devices.h - * - * OMAP2 platform device setup/initialization - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __ARCH_ARM_MACH_OMAP_DEVICES_H -#define __ARCH_ARM_MACH_OMAP_DEVICES_H - -struct isp_platform_data; - -int omap3_init_camera(struct isp_platform_data *pdata); - -#endif diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 54a5ba54d2ff..8a2ae82cb227 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -57,15 +57,15 @@ int omap_type(void) if (val < OMAP2_DEVICETYPE_MASK) return val; - if (cpu_is_omap24xx()) { + if (soc_is_omap24xx()) { val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS); - } else if (cpu_is_ti81xx()) { + } else if (soc_is_ti81xx()) { val = omap_ctrl_readl(TI81XX_CONTROL_STATUS); } else if (soc_is_am33xx() || soc_is_am43xx()) { val = omap_ctrl_readl(AM33XX_CONTROL_STATUS); - } else if (cpu_is_omap34xx()) { + } else if (soc_is_omap34xx()) { val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS); - } else if (cpu_is_omap44xx()) { + } else if (soc_is_omap44xx()) { val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS); } else if (soc_is_omap54xx() || soc_is_dra7xx()) { val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS); @@ -122,7 +122,7 @@ static u16 tap_prod_id; void omap_get_die_id(struct omap_die_id *odi) { - if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) { + if (soc_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) { odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0); odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1); odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2); @@ -218,17 +218,17 @@ static void __init omap3_cpuinfo(void) * on available features. Upon detection, update the CPU id * and CPU class bits. */ - if (cpu_is_omap3630()) { + if (soc_is_omap3630()) { cpu_name = "OMAP3630"; } else if (soc_is_am35xx()) { cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505"; - } else if (cpu_is_ti816x()) { + } else if (soc_is_ti816x()) { cpu_name = "TI816X"; } else if (soc_is_am335x()) { cpu_name = "AM335X"; } else if (soc_is_am437x()) { cpu_name = "AM437x"; - } else if (cpu_is_ti814x()) { + } else if (soc_is_ti814x()) { cpu_name = "TI814X"; } else if (omap3_has_iva() && omap3_has_sgx()) { /* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */ @@ -275,11 +275,11 @@ void __init omap3xxx_check_features(void) OMAP3_CHECK_FEATURE(status, SGX); OMAP3_CHECK_FEATURE(status, NEON); OMAP3_CHECK_FEATURE(status, ISP); - if (cpu_is_omap3630()) + if (soc_is_omap3630()) omap_features |= OMAP3_HAS_192MHZ_CLK; - if (cpu_is_omap3430() || cpu_is_omap3630()) + if (soc_is_omap3430() || soc_is_omap3630()) omap_features |= OMAP3_HAS_IO_WAKEUP; - if (cpu_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 || + if (soc_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 || omap_rev() == OMAP3430_REV_ES3_1_2) omap_features |= OMAP3_HAS_IO_CHAIN_CTRL; @@ -701,7 +701,7 @@ void __init omap2_set_globals_tap(u32 class, void __iomem *tap) tap_base = tap; /* XXX What is this intended to do? */ - if (cpu_is_omap34xx()) + if (soc_is_omap34xx()) tap_prod_id = 0x0210; else tap_prod_id = 0x0208; @@ -719,11 +719,11 @@ static const char * const omap_types[] = { static const char * __init omap_get_family(void) { - if (cpu_is_omap24xx()) + if (soc_is_omap24xx()) return kasprintf(GFP_KERNEL, "OMAP2"); - else if (cpu_is_omap34xx()) + else if (soc_is_omap34xx()) return kasprintf(GFP_KERNEL, "OMAP3"); - else if (cpu_is_omap44xx()) + else if (soc_is_omap44xx()) return kasprintf(GFP_KERNEL, "OMAP4"); else if (soc_is_omap54xx()) return kasprintf(GFP_KERNEL, "OMAP5"); diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c index 971791fe9a3f..593fec753b28 100644 --- a/arch/arm/mach-omap2/omap-hotplug.c +++ b/arch/arm/mach-omap2/omap-hotplug.c @@ -27,7 +27,7 @@ * platform-specific code to shutdown a CPU * Called with IRQs disabled */ -void __ref omap4_cpu_die(unsigned int cpu) +void omap4_cpu_die(unsigned int cpu) { unsigned int boot_cpu = 0; void __iomem *base = omap_get_wakeupgen_base(); diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index e1d2e991d17a..f397bd6bd6e3 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -20,6 +20,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/irqdomain.h> #include <linux/of_address.h> #include <linux/platform_device.h> @@ -330,7 +331,7 @@ static int irq_cpu_hotplug_notify(struct notifier_block *self, return NOTIFY_OK; } -static struct notifier_block __refdata irq_hotplug_notifier = { +static struct notifier_block irq_hotplug_notifier = { .notifier_call = irq_cpu_hotplug_notify, }; @@ -399,40 +400,42 @@ static struct irq_chip wakeupgen_chip = { #endif }; -static int wakeupgen_domain_xlate(struct irq_domain *domain, - struct device_node *controller, - const u32 *intspec, - unsigned int intsize, - unsigned long *out_hwirq, - unsigned int *out_type) +static int wakeupgen_domain_translate(struct irq_domain *d, + struct irq_fwspec *fwspec, + unsigned long *hwirq, + unsigned int *type) { - if (domain->of_node != controller) - return -EINVAL; /* Shouldn't happen, really... */ - if (intsize != 3) - return -EINVAL; /* Not GIC compliant */ - if (intspec[0] != 0) - return -EINVAL; /* No PPI should point to this domain */ + if (is_of_node(fwspec->fwnode)) { + if (fwspec->param_count != 3) + return -EINVAL; - *out_hwirq = intspec[1]; - *out_type = intspec[2]; - return 0; + /* No PPI should point to this domain */ + if (fwspec->param[0] != 0) + return -EINVAL; + + *hwirq = fwspec->param[1]; + *type = fwspec->param[2]; + return 0; + } + + return -EINVAL; } static int wakeupgen_domain_alloc(struct irq_domain *domain, unsigned int virq, unsigned int nr_irqs, void *data) { - struct of_phandle_args *args = data; - struct of_phandle_args parent_args; + struct irq_fwspec *fwspec = data; + struct irq_fwspec parent_fwspec; irq_hw_number_t hwirq; int i; - if (args->args_count != 3) + if (fwspec->param_count != 3) return -EINVAL; /* Not GIC compliant */ - if (args->args[0] != 0) + if (fwspec->param[0] != 0) return -EINVAL; /* No PPI should point to this domain */ - hwirq = args->args[1]; + hwirq = fwspec->param[1]; if (hwirq >= MAX_IRQS) return -EINVAL; /* Can't deal with this */ @@ -440,15 +443,16 @@ static int wakeupgen_domain_alloc(struct irq_domain *domain, irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i, &wakeupgen_chip, NULL); - parent_args = *args; - parent_args.np = domain->parent->of_node; - return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &parent_args); + parent_fwspec = *fwspec; + parent_fwspec.fwnode = domain->parent->fwnode; + return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, + &parent_fwspec); } static const struct irq_domain_ops wakeupgen_domain_ops = { - .xlate = wakeupgen_domain_xlate, - .alloc = wakeupgen_domain_alloc, - .free = irq_domain_free_irqs_common, + .translate = wakeupgen_domain_translate, + .alloc = wakeupgen_domain_alloc, + .free = irq_domain_free_irqs_common, }; /* @@ -537,9 +541,4 @@ static int __init wakeupgen_init(struct device_node *node, return 0; } - -/* - * We cannot use the IRQCHIP_DECLARE macro that lives in - * drivers/irqchip, so we're forced to roll our own. Not very nice. - */ -OF_DECLARE_2(irqchip, ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init); +IRQCHIP_DECLARE(ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init); diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c index 8f5989d48a80..1c210cb2b8c1 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c @@ -152,20 +152,10 @@ struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space am33xx_elm_addr_space[] = { - { - .pa_start = 0x48080000, - .pa_end = 0x48080000 + SZ_8K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - struct omap_hwmod_ocp_if am33xx_l4_ls__elm = { .master = &am33xx_l4_ls_hwmod, .slave = &am33xx_elm_hwmod, .clk = "l4ls_gclk", - .addr = am33xx_elm_addr_space, .user = OCP_USER_MPU, }; @@ -285,20 +275,10 @@ struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2 = { }; /* l3s cfg -> gpmc */ -static struct omap_hwmod_addr_space am33xx_gpmc_addr_space[] = { - { - .pa_start = 0x50000000, - .pa_end = 0x50000000 + SZ_8K - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = { .master = &am33xx_l3_s_hwmod, .slave = &am33xx_gpmc_hwmod, .clk = "l3s_gclk", - .addr = am33xx_gpmc_addr_space, .user = OCP_USER_MPU, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index dc55f8dedf2c..aff78d5198d2 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -26,7 +26,6 @@ #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/iommu-omap.h> -#include <linux/platform_data/mailbox-omap.h> #include <plat/dmtimer.h> #include "soc.h" @@ -1506,26 +1505,9 @@ static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = { .sysc = &omap3xxx_mailbox_sysc, }; -static struct omap_mbox_dev_info omap3xxx_mailbox_info[] = { - { .name = "dsp", .tx_id = 0, .rx_id = 1 }, -}; - -static struct omap_mbox_pdata omap3xxx_mailbox_attrs = { - .num_users = 2, - .num_fifos = 2, - .info_cnt = ARRAY_SIZE(omap3xxx_mailbox_info), - .info = omap3xxx_mailbox_info, -}; - -static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = { - { .irq = 26 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - static struct omap_hwmod omap3xxx_mailbox_hwmod = { .name = "mailbox", .class = &omap3xxx_mailbox_hwmod_class, - .mpu_irqs = omap3xxx_mailbox_irqs, .main_clk = "mailboxes_ick", .prcm = { .omap2 = { @@ -1536,7 +1518,6 @@ static struct omap_hwmod omap3xxx_mailbox_hwmod = { .idlest_idle_bit = OMAP3430_ST_MAILBOXES_SHIFT, }, }, - .dev_attr = &omap3xxx_mailbox_attrs, }; /* @@ -3276,20 +3257,10 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3_sidetone = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space omap3xxx_mailbox_addrs[] = { - { - .pa_start = 0x48094000, - .pa_end = 0x480941ff, - .flags = ADDR_TYPE_RT, - }, - { } -}; - /* l4_core -> mailbox */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__mailbox = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_mailbox_hwmod, - .addr = omap3xxx_mailbox_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 43eebf2c59e2..a5e444b1e57a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -4471,21 +4471,11 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_mpu = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap44xx_spinlock_addrs[] = { - { - .pa_start = 0x4a0f6000, - .pa_end = 0x4a0f6fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_cfg -> spinlock */ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__spinlock = { .master = &omap44xx_l4_cfg_hwmod, .slave = &omap44xx_spinlock_hwmod, .clk = "l4_div_ck", - .addr = omap44xx_spinlock_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 7c3fac035e93..8cdfd9b7ab4f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -1844,8 +1844,7 @@ static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSC_HAS_RESET_STATUS), + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART | MSTANDBY_SMART_WKUP), diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 562247bced49..51d1ecb384bd 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -2566,21 +2566,11 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space dra7xx_elm_addrs[] = { - { - .pa_start = 0x48078000, - .pa_end = 0x48078fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_per1 -> elm */ static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = { .master = &dra7xx_l4_per1_hwmod, .slave = &dra7xx_elm_hwmod, .clk = "l3_iclk_div", - .addr = dra7xx_elm_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2648,21 +2638,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio8 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space dra7xx_gpmc_addrs[] = { - { - .pa_start = 0x50000000, - .pa_end = 0x500003ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l3_main_1 -> gpmc */ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = { .master = &dra7xx_l3_main_1_hwmod, .slave = &dra7xx_gpmc_hwmod, .clk = "l3_iclk_div", - .addr = dra7xx_gpmc_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3029,21 +3009,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__smartreflex_mpu = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space dra7xx_spinlock_addrs[] = { - { - .pa_start = 0x4a0f6000, - .pa_end = 0x4a0f6fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_cfg -> spinlock */ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__spinlock = { .master = &dra7xx_l4_cfg_hwmod, .slave = &dra7xx_spinlock_hwmod, .clk = "l3_iclk_div", - .addr = dra7xx_spinlock_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index ea56397599c2..1dfe34654c43 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -559,7 +559,14 @@ static void pdata_quirks_check(struct pdata_init *quirks) void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table) { - omap_sdrc_init(NULL, NULL); + /* + * We still need this for omap2420 and omap3 PM to work, others are + * using drivers/misc/sram.c already. + */ + if (of_machine_is_compatible("ti,omap2420") || + of_machine_is_compatible("ti,omap3")) + omap_sdrc_init(NULL, NULL); + pdata_quirks_check(auxdata_quirks); of_platform_populate(NULL, omap_dt_match_table, omap_auxdata_lookup, NULL); diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index d697cecf762b..178e22c146b7 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -210,7 +210,7 @@ static inline int omap4plus_init_static_deps(const struct static_dep_map *map) } map++; - }; + } return 0; } diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index d31c495175c1..2e00c7f1f471 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -582,7 +582,7 @@ void __init omap3xxx_powerdomains_init(void) /* Only 81xx needs custom pwrdm_operations */ if (!cpu_is_ti81xx()) - pwrdm_register_platform_funcs(&omap3_pwrdm_operations);; + pwrdm_register_platform_funcs(&omap3_pwrdm_operations); rev = omap_rev(); diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 2d1d3845253c..79ca3c3eb2af 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -129,9 +129,9 @@ int omap_type(void); /* * omap_rev bits: - * CPU id bits (0730, 1510, 1710, 2422...) [31:16] - * CPU revision (See _REV_ defined in cpu.h) [15:08] - * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] + * SoC id bits (0730, 1510, 1710, 2422...) [31:16] + * SoC revision (See _REV_ defined in cpu.h) [15:08] + * SoC class bits (15xx, 16xx, 24xx, 34xx...) [07:00] */ unsigned int omap_rev(void); @@ -141,20 +141,20 @@ static inline int soc_is_omap(void) } /* - * Get the CPU revision for OMAP devices + * Get the SoC revision for OMAP devices */ #define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) /* * Macros to group OMAP into cpu classes. * These can be used in most places. - * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 - * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 - * cpu_is_omap243x(): True for OMAP2430 - * cpu_is_omap343x(): True for OMAP3430 - * cpu_is_omap443x(): True for OMAP4430 - * cpu_is_omap446x(): True for OMAP4460 - * cpu_is_omap447x(): True for OMAP4470 + * soc_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 + * soc_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 + * soc_is_omap243x(): True for OMAP2430 + * soc_is_omap343x(): True for OMAP3430 + * soc_is_omap443x(): True for OMAP4430 + * soc_is_omap446x(): True for OMAP4460 + * soc_is_omap447x(): True for OMAP4470 * soc_is_omap543x(): True for OMAP5430, OMAP5432 */ #define GET_OMAP_CLASS (omap_rev() & 0xff) @@ -225,23 +225,23 @@ IS_TI_SUBCLASS(814x, 0x814) IS_AM_SUBCLASS(335x, 0x335) IS_AM_SUBCLASS(437x, 0x437) -#define cpu_is_omap24xx() 0 -#define cpu_is_omap242x() 0 -#define cpu_is_omap243x() 0 -#define cpu_is_omap34xx() 0 -#define cpu_is_omap343x() 0 -#define cpu_is_ti81xx() 0 -#define cpu_is_ti816x() 0 -#define cpu_is_ti814x() 0 +#define soc_is_omap24xx() 0 +#define soc_is_omap242x() 0 +#define soc_is_omap243x() 0 +#define soc_is_omap34xx() 0 +#define soc_is_omap343x() 0 +#define soc_is_ti81xx() 0 +#define soc_is_ti816x() 0 +#define soc_is_ti814x() 0 #define soc_is_am35xx() 0 #define soc_is_am33xx() 0 #define soc_is_am335x() 0 #define soc_is_am43xx() 0 #define soc_is_am437x() 0 -#define cpu_is_omap44xx() 0 -#define cpu_is_omap443x() 0 -#define cpu_is_omap446x() 0 -#define cpu_is_omap447x() 0 +#define soc_is_omap44xx() 0 +#define soc_is_omap443x() 0 +#define soc_is_omap446x() 0 +#define soc_is_omap447x() 0 #define soc_is_omap54xx() 0 #define soc_is_omap543x() 0 #define soc_is_dra7xx() 0 @@ -250,54 +250,54 @@ IS_AM_SUBCLASS(437x, 0x437) #if defined(MULTI_OMAP2) # if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap24xx -# define cpu_is_omap24xx() is_omap24xx() +# undef soc_is_omap24xx +# define soc_is_omap24xx() is_omap24xx() # endif # if defined (CONFIG_SOC_OMAP2420) -# undef cpu_is_omap242x -# define cpu_is_omap242x() is_omap242x() +# undef soc_is_omap242x +# define soc_is_omap242x() is_omap242x() # endif # if defined (CONFIG_SOC_OMAP2430) -# undef cpu_is_omap243x -# define cpu_is_omap243x() is_omap243x() +# undef soc_is_omap243x +# define soc_is_omap243x() is_omap243x() # endif # if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap34xx -# undef cpu_is_omap343x -# define cpu_is_omap34xx() is_omap34xx() -# define cpu_is_omap343x() is_omap343x() +# undef soc_is_omap34xx +# undef soc_is_omap343x +# define soc_is_omap34xx() is_omap34xx() +# define soc_is_omap343x() is_omap343x() # endif #else # if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap24xx -# define cpu_is_omap24xx() 1 +# undef soc_is_omap24xx +# define soc_is_omap24xx() 1 # endif # if defined(CONFIG_SOC_OMAP2420) -# undef cpu_is_omap242x -# define cpu_is_omap242x() 1 +# undef soc_is_omap242x +# define soc_is_omap242x() 1 # endif # if defined(CONFIG_SOC_OMAP2430) -# undef cpu_is_omap243x -# define cpu_is_omap243x() 1 +# undef soc_is_omap243x +# define soc_is_omap243x() 1 # endif # if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap34xx -# define cpu_is_omap34xx() 1 +# undef soc_is_omap34xx +# define soc_is_omap34xx() 1 # endif # if defined(CONFIG_SOC_OMAP3430) -# undef cpu_is_omap343x -# define cpu_is_omap343x() 1 +# undef soc_is_omap343x +# define soc_is_omap343x() 1 # endif #endif /* * Macros to detect individual cpu types. * These are only rarely needed. - * cpu_is_omap2420(): True for OMAP2420 - * cpu_is_omap2422(): True for OMAP2422 - * cpu_is_omap2423(): True for OMAP2423 - * cpu_is_omap2430(): True for OMAP2430 - * cpu_is_omap3430(): True for OMAP3430 + * soc_is_omap2420(): True for OMAP2420 + * soc_is_omap2422(): True for OMAP2422 + * soc_is_omap2423(): True for OMAP2423 + * soc_is_omap2430(): True for OMAP2430 + * soc_is_omap3430(): True for OMAP3430 */ #define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) @@ -313,51 +313,51 @@ IS_OMAP_TYPE(2423, 0x2423) IS_OMAP_TYPE(2430, 0x2430) IS_OMAP_TYPE(3430, 0x3430) -#define cpu_is_omap2420() 0 -#define cpu_is_omap2422() 0 -#define cpu_is_omap2423() 0 -#define cpu_is_omap2430() 0 -#define cpu_is_omap3430() 0 -#define cpu_is_omap3630() 0 +#define soc_is_omap2420() 0 +#define soc_is_omap2422() 0 +#define soc_is_omap2423() 0 +#define soc_is_omap2430() 0 +#define soc_is_omap3430() 0 +#define soc_is_omap3630() 0 #define soc_is_omap5430() 0 /* These are needed for the common code */ #ifdef CONFIG_ARCH_OMAP2PLUS -#define cpu_is_omap7xx() 0 -#define cpu_is_omap15xx() 0 -#define cpu_is_omap16xx() 0 -#define cpu_is_omap1510() 0 -#define cpu_is_omap1610() 0 -#define cpu_is_omap1611() 0 -#define cpu_is_omap1621() 0 -#define cpu_is_omap1710() 0 +#define soc_is_omap7xx() 0 +#define soc_is_omap15xx() 0 +#define soc_is_omap16xx() 0 +#define soc_is_omap1510() 0 +#define soc_is_omap1610() 0 +#define soc_is_omap1611() 0 +#define soc_is_omap1621() 0 +#define soc_is_omap1710() 0 #define cpu_class_is_omap1() 0 #define cpu_class_is_omap2() 1 #endif #if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap2420 -# undef cpu_is_omap2422 -# undef cpu_is_omap2423 -# undef cpu_is_omap2430 -# define cpu_is_omap2420() is_omap2420() -# define cpu_is_omap2422() is_omap2422() -# define cpu_is_omap2423() is_omap2423() -# define cpu_is_omap2430() is_omap2430() +# undef soc_is_omap2420 +# undef soc_is_omap2422 +# undef soc_is_omap2423 +# undef soc_is_omap2430 +# define soc_is_omap2420() is_omap2420() +# define soc_is_omap2422() is_omap2422() +# define soc_is_omap2423() is_omap2423() +# define soc_is_omap2430() is_omap2430() #endif #if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap3430 -# undef cpu_is_ti81xx -# undef cpu_is_ti816x -# undef cpu_is_ti814x +# undef soc_is_omap3430 +# undef soc_is_ti81xx +# undef soc_is_ti816x +# undef soc_is_ti814x # undef soc_is_am35xx -# define cpu_is_omap3430() is_omap3430() -# undef cpu_is_omap3630 -# define cpu_is_omap3630() is_omap363x() -# define cpu_is_ti81xx() is_ti81xx() -# define cpu_is_ti816x() is_ti816x() -# define cpu_is_ti814x() is_ti814x() +# define soc_is_omap3430() is_omap3430() +# undef soc_is_omap3630 +# define soc_is_omap3630() is_omap363x() +# define soc_is_ti81xx() is_ti81xx() +# define soc_is_ti816x() is_ti816x() +# define soc_is_ti814x() is_ti814x() # define soc_is_am35xx() is_am35xx() #endif @@ -376,14 +376,14 @@ IS_OMAP_TYPE(3430, 0x3430) #endif # if defined(CONFIG_ARCH_OMAP4) -# undef cpu_is_omap44xx -# undef cpu_is_omap443x -# undef cpu_is_omap446x -# undef cpu_is_omap447x -# define cpu_is_omap44xx() is_omap44xx() -# define cpu_is_omap443x() is_omap443x() -# define cpu_is_omap446x() is_omap446x() -# define cpu_is_omap447x() is_omap447x() +# undef soc_is_omap44xx +# undef soc_is_omap443x +# undef soc_is_omap446x +# undef soc_is_omap447x +# define soc_is_omap44xx() is_omap44xx() +# define soc_is_omap443x() is_omap443x() +# define soc_is_omap446x() is_omap446x() +# define soc_is_omap447x() is_omap447x() # endif # if defined(CONFIG_SOC_OMAP5) @@ -556,5 +556,22 @@ level(__##fn); #define omap_late_initcall(fn) omap_initcall(late_initcall, fn) #define omap_late_initcall_sync(fn) omap_initcall(late_initcall_sync, fn) -#endif /* __ASSEMBLY__ */ +/* Legacy defines, these can be removed when users are removed */ +#define cpu_is_omap2420() soc_is_omap2420() +#define cpu_is_omap2422() soc_is_omap2422() +#define cpu_is_omap242x() soc_is_omap242x() +#define cpu_is_omap2430() soc_is_omap2430() +#define cpu_is_omap243x() soc_is_omap243x() +#define cpu_is_omap24xx() soc_is_omap24xx() +#define cpu_is_omap3430() soc_is_omap3430() +#define cpu_is_omap343x() soc_is_omap343x() +#define cpu_is_omap34xx() soc_is_omap34xx() +#define cpu_is_omap3630() soc_is_omap3630() +#define cpu_is_omap443x() soc_is_omap443x() +#define cpu_is_omap446x() soc_is_omap446x() +#define cpu_is_omap44xx() soc_is_omap44xx() +#define cpu_is_ti814x() soc_is_ti814x() +#define cpu_is_ti816x() soc_is_ti816x() +#define cpu_is_ti81xx() soc_is_ti81xx() +#endif /* __ASSEMBLY__ */ diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c index cd488b80ba36..83d0e61f49e6 100644 --- a/arch/arm/mach-omap2/sram.c +++ b/arch/arm/mach-omap2/sram.c @@ -211,35 +211,10 @@ static inline int omap243x_sram_init(void) #ifdef CONFIG_ARCH_OMAP3 -static u32 (*_omap3_sram_configure_core_dpll)( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); - -u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) -{ - BUG_ON(!_omap3_sram_configure_core_dpll); - return _omap3_sram_configure_core_dpll( - m2, unlock_dll, f, inc, - sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, - sdrc_actim_ctrl_b_0, sdrc_mr_0, - sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, - sdrc_actim_ctrl_b_1, sdrc_mr_1); -} - void omap3_sram_restore_context(void) { omap_sram_reset(); - _omap3_sram_configure_core_dpll = - omap_sram_push(omap3_sram_configure_core_dpll, - omap3_sram_configure_core_dpll_sz); omap_push_sram_idle(); } diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h index 948d3edefc38..18dc884267fa 100644 --- a/arch/arm/mach-omap2/sram.h +++ b/arch/arm/mach-omap2/sram.h @@ -15,12 +15,6 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); -extern u32 omap3_configure_core_dpll( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); extern void omap3_sram_restore_context(void); /* Do not use these */ @@ -52,14 +46,6 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern unsigned long omap243x_sram_reprogram_sdrc_sz; -extern u32 omap3_sram_configure_core_dpll( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); -extern unsigned long omap3_sram_configure_core_dpll_sz; - #ifdef CONFIG_PM extern void omap_push_sram_idle(void); #else diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S deleted file mode 100644 index 1446331b576a..000000000000 --- a/arch/arm/mach-omap2/sram34xx.S +++ /dev/null @@ -1,346 +0,0 @@ -/* - * linux/arch/arm/mach-omap3/sram.S - * - * Omap3 specific functions that need to be run in internal SRAM - * - * Copyright (C) 2004, 2007, 2008 Texas Instruments, Inc. - * Copyright (C) 2008 Nokia Corporation - * - * Rajendra Nayak <rnayak@ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * Paul Walmsley - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <linux/linkage.h> - -#include <asm/assembler.h> - -#include "soc.h" -#include "iomap.h" -#include "sdrc.h" -#include "cm3xxx.h" - -/* - * This file needs be built unconditionally as ARM to interoperate correctly - * with non-Thumb-2-capable firmware. - */ - .arm - - .text - -/* r1 parameters */ -#define SDRC_NO_UNLOCK_DLL 0x0 -#define SDRC_UNLOCK_DLL 0x1 - -/* SDRC_DLLA_CTRL bit settings */ -#define FIXEDDELAY_SHIFT 24 -#define FIXEDDELAY_MASK (0xff << FIXEDDELAY_SHIFT) -#define DLLIDLE_MASK 0x4 - -/* - * SDRC_DLLA_CTRL default values: TI hardware team indicates that - * FIXEDDELAY should be initialized to 0xf. This apparently was - * empirically determined during process testing, so no derivation - * was provided. - */ -#define FIXEDDELAY_DEFAULT (0x0f << FIXEDDELAY_SHIFT) - -/* SDRC_DLLA_STATUS bit settings */ -#define LOCKSTATUS_MASK 0x4 - -/* SDRC_POWER bit settings */ -#define SRFRONIDLEREQ_MASK 0x40 - -/* CM_IDLEST1_CORE bit settings */ -#define ST_SDRC_MASK 0x2 - -/* CM_ICLKEN1_CORE bit settings */ -#define EN_SDRC_MASK 0x2 - -/* CM_CLKSEL1_PLL bit settings */ -#define CORE_DPLL_CLKOUT_DIV_SHIFT 0x1b - -/* - * omap3_sram_configure_core_dpll - change DPLL3 M2 divider - * - * Params passed in registers: - * r0 = new M2 divider setting (only 1 and 2 supported right now) - * r1 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for - * SDRC rates < 83MHz - * r2 = number of MPU cycles to wait for SDRC to stabilize after - * reprogramming the SDRC when switching to a slower MPU speed - * r3 = increasing SDRC rate? (1 = yes, 0 = no) - * - * Params passed via the stack. The needed params will be copied in SRAM - * before use by the code in SRAM (SDRAM is not accessible during SDRC - * reconfiguration): - * new SDRC_RFR_CTRL_0 register contents - * new SDRC_ACTIM_CTRL_A_0 register contents - * new SDRC_ACTIM_CTRL_B_0 register contents - * new SDRC_MR_0 register value - * new SDRC_RFR_CTRL_1 register contents - * new SDRC_ACTIM_CTRL_A_1 register contents - * new SDRC_ACTIM_CTRL_B_1 register contents - * new SDRC_MR_1 register value - * - * If the param SDRC_RFR_CTRL_1 is 0, the parameters are not programmed into - * the SDRC CS1 registers - * - * NOTE: This code no longer attempts to program the SDRC AC timing and MR - * registers. This is because the code currently cannot ensure that all - * L3 initiators (e.g., sDMA, IVA, DSS DISPC, etc.) are not accessing the - * SDRAM when the registers are written. If the registers are changed while - * an initiator is accessing SDRAM, memory can be corrupted and/or the SDRC - * may enter an unpredictable state. In the future, the intent is to - * re-enable this code in cases where we can ensure that no initiators are - * touching the SDRAM. Until that time, users who know that their use case - * can satisfy the above requirement can enable the CONFIG_OMAP3_SDRC_AC_TIMING - * option. - * - * Richard Woodruff notes that any changes to this code must be carefully - * audited and tested to ensure that they don't cause a TLB miss while - * the SDRAM is inaccessible. Such a situation will crash the system - * since it will cause the ARM MMU to attempt to walk the page tables. - * These crashes may be intermittent. - */ - .align 3 -ENTRY(omap3_sram_configure_core_dpll) - stmfd sp!, {r1-r12, lr} @ store regs to stack - - @ pull the extra args off the stack - @ and store them in SRAM - -/* - * PC-relative stores are deprecated in ARMv7 and lead to undefined behaviour - * in Thumb-2: use a r7 as a base instead. - * Be careful not to clobber r7 when maintaing this file. - */ - THUMB( adr r7, omap3_sram_configure_core_dpll ) - .macro strtext Rt:req, label:req - ARM( str \Rt, \label ) - THUMB( str \Rt, [r7, \label - omap3_sram_configure_core_dpll] ) - .endm - - ldr r4, [sp, #52] - strtext r4, omap_sdrc_rfr_ctrl_0_val - ldr r4, [sp, #56] - strtext r4, omap_sdrc_actim_ctrl_a_0_val - ldr r4, [sp, #60] - strtext r4, omap_sdrc_actim_ctrl_b_0_val - ldr r4, [sp, #64] - strtext r4, omap_sdrc_mr_0_val - ldr r4, [sp, #68] - strtext r4, omap_sdrc_rfr_ctrl_1_val - cmp r4, #0 @ if SDRC_RFR_CTRL_1 is 0, - beq skip_cs1_params @ do not use cs1 params - ldr r4, [sp, #72] - strtext r4, omap_sdrc_actim_ctrl_a_1_val - ldr r4, [sp, #76] - strtext r4, omap_sdrc_actim_ctrl_b_1_val - ldr r4, [sp, #80] - strtext r4, omap_sdrc_mr_1_val -skip_cs1_params: - mrc p15, 0, r8, c1, c0, 0 @ read ctrl register - bic r10, r8, #0x800 @ clear Z-bit, disable branch prediction - mcr p15, 0, r10, c1, c0, 0 @ write ctrl register - dsb @ flush buffered writes to interconnect - isb @ prevent speculative exec past here - cmp r3, #1 @ if increasing SDRC clk rate, - bleq configure_sdrc @ program the SDRC regs early (for RFR) - cmp r1, #SDRC_UNLOCK_DLL @ set the intended DLL state - bleq unlock_dll - blne lock_dll - bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC - bl configure_core_dpll @ change the DPLL3 M2 divider - mov r12, r2 - bl wait_clk_stable @ wait for SDRC to stabilize - bl enable_sdrc @ take SDRC out of idle - cmp r1, #SDRC_UNLOCK_DLL @ wait for DLL status to change - bleq wait_dll_unlock - blne wait_dll_lock - cmp r3, #1 @ if increasing SDRC clk rate, - beq return_to_sdram @ return to SDRAM code, otherwise, - bl configure_sdrc @ reprogram SDRC regs now -return_to_sdram: - mcr p15, 0, r8, c1, c0, 0 @ restore ctrl register - isb @ prevent speculative exec past here - mov r0, #0 @ return value - ldmfd sp!, {r1-r12, pc} @ restore regs and return -unlock_dll: - ldr r11, omap3_sdrc_dlla_ctrl - ldr r12, [r11] - bic r12, r12, #FIXEDDELAY_MASK - orr r12, r12, #FIXEDDELAY_DEFAULT - orr r12, r12, #DLLIDLE_MASK - str r12, [r11] @ (no OCP barrier needed) - bx lr -lock_dll: - ldr r11, omap3_sdrc_dlla_ctrl - ldr r12, [r11] - bic r12, r12, #DLLIDLE_MASK - str r12, [r11] @ (no OCP barrier needed) - bx lr -sdram_in_selfrefresh: - ldr r11, omap3_sdrc_power @ read the SDRC_POWER register - ldr r12, [r11] @ read the contents of SDRC_POWER - mov r9, r12 @ keep a copy of SDRC_POWER bits - orr r12, r12, #SRFRONIDLEREQ_MASK @ enable self refresh on idle - str r12, [r11] @ write back to SDRC_POWER register - ldr r12, [r11] @ posted-write barrier for SDRC -idle_sdrc: - ldr r11, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg - ldr r12, [r11] - bic r12, r12, #EN_SDRC_MASK @ disable iclk bit for SDRC - str r12, [r11] -wait_sdrc_idle: - ldr r11, omap3_cm_idlest1_core - ldr r12, [r11] - and r12, r12, #ST_SDRC_MASK @ check for SDRC idle - cmp r12, #ST_SDRC_MASK - bne wait_sdrc_idle - bx lr -configure_core_dpll: - ldr r11, omap3_cm_clksel1_pll - ldr r12, [r11] - ldr r10, core_m2_mask_val @ modify m2 for core dpll - and r12, r12, r10 - orr r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT - str r12, [r11] - ldr r12, [r11] @ posted-write barrier for CM - bx lr -wait_clk_stable: - subs r12, r12, #1 - bne wait_clk_stable - bx lr -enable_sdrc: - ldr r11, omap3_cm_iclken1_core - ldr r12, [r11] - orr r12, r12, #EN_SDRC_MASK @ enable iclk bit for SDRC - str r12, [r11] -wait_sdrc_idle1: - ldr r11, omap3_cm_idlest1_core - ldr r12, [r11] - and r12, r12, #ST_SDRC_MASK - cmp r12, #0 - bne wait_sdrc_idle1 -restore_sdrc_power_val: - ldr r11, omap3_sdrc_power - str r9, [r11] @ restore SDRC_POWER, no barrier needed - bx lr -wait_dll_lock: - ldr r11, omap3_sdrc_dlla_status - ldr r12, [r11] - and r12, r12, #LOCKSTATUS_MASK - cmp r12, #LOCKSTATUS_MASK - bne wait_dll_lock - bx lr -wait_dll_unlock: - ldr r11, omap3_sdrc_dlla_status - ldr r12, [r11] - and r12, r12, #LOCKSTATUS_MASK - cmp r12, #0x0 - bne wait_dll_unlock - bx lr -configure_sdrc: - ldr r12, omap_sdrc_rfr_ctrl_0_val @ fetch value from SRAM - ldr r11, omap3_sdrc_rfr_ctrl_0 @ fetch addr from SRAM - str r12, [r11] @ store -#ifdef CONFIG_OMAP3_SDRC_AC_TIMING - ldr r12, omap_sdrc_actim_ctrl_a_0_val - ldr r11, omap3_sdrc_actim_ctrl_a_0 - str r12, [r11] - ldr r12, omap_sdrc_actim_ctrl_b_0_val - ldr r11, omap3_sdrc_actim_ctrl_b_0 - str r12, [r11] - ldr r12, omap_sdrc_mr_0_val - ldr r11, omap3_sdrc_mr_0 - str r12, [r11] -#endif - ldr r12, omap_sdrc_rfr_ctrl_1_val - cmp r12, #0 @ if SDRC_RFR_CTRL_1 is 0, - beq skip_cs1_prog @ do not program cs1 params - ldr r11, omap3_sdrc_rfr_ctrl_1 - str r12, [r11] -#ifdef CONFIG_OMAP3_SDRC_AC_TIMING - ldr r12, omap_sdrc_actim_ctrl_a_1_val - ldr r11, omap3_sdrc_actim_ctrl_a_1 - str r12, [r11] - ldr r12, omap_sdrc_actim_ctrl_b_1_val - ldr r11, omap3_sdrc_actim_ctrl_b_1 - str r12, [r11] - ldr r12, omap_sdrc_mr_1_val - ldr r11, omap3_sdrc_mr_1 - str r12, [r11] -#endif -skip_cs1_prog: - ldr r12, [r11] @ posted-write barrier for SDRC - bx lr - - .align -omap3_sdrc_power: - .word OMAP34XX_SDRC_REGADDR(SDRC_POWER) -omap3_cm_clksel1_pll: - .word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1) -omap3_cm_idlest1_core: - .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST) -omap3_cm_iclken1_core: - .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1) - -omap3_sdrc_rfr_ctrl_0: - .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0) -omap3_sdrc_rfr_ctrl_1: - .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1) -omap3_sdrc_actim_ctrl_a_0: - .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0) -omap3_sdrc_actim_ctrl_a_1: - .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1) -omap3_sdrc_actim_ctrl_b_0: - .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0) -omap3_sdrc_actim_ctrl_b_1: - .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1) -omap3_sdrc_mr_0: - .word OMAP34XX_SDRC_REGADDR(SDRC_MR_0) -omap3_sdrc_mr_1: - .word OMAP34XX_SDRC_REGADDR(SDRC_MR_1) -omap_sdrc_rfr_ctrl_0_val: - .word 0xDEADBEEF -omap_sdrc_rfr_ctrl_1_val: - .word 0xDEADBEEF -omap_sdrc_actim_ctrl_a_0_val: - .word 0xDEADBEEF -omap_sdrc_actim_ctrl_a_1_val: - .word 0xDEADBEEF -omap_sdrc_actim_ctrl_b_0_val: - .word 0xDEADBEEF -omap_sdrc_actim_ctrl_b_1_val: - .word 0xDEADBEEF -omap_sdrc_mr_0_val: - .word 0xDEADBEEF -omap_sdrc_mr_1_val: - .word 0xDEADBEEF - -omap3_sdrc_dlla_status: - .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) -omap3_sdrc_dlla_ctrl: - .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL) -core_m2_mask_val: - .word 0x07FFFFFF -ENDPROC(omap3_sram_configure_core_dpll) - -ENTRY(omap3_sram_configure_core_dpll_sz) - .word . - omap3_sram_configure_core_dpll - diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index a55655127ef2..b18ebbefae09 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -183,7 +183,8 @@ static struct device_node * __init omap_get_timer_dt(const struct of_device_id * of_get_property(np, "ti,timer-secure", NULL))) continue; - of_add_property(np, &device_disabled); + if (!of_device_is_compatible(np, "ti,omap-counter32k")) + of_add_property(np, &device_disabled); return np; } @@ -394,7 +395,6 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void) int ret; struct device_node *np = NULL; struct omap_hwmod *oh; - void __iomem *vbase; const char *oh_name = "counter_32k"; /* @@ -420,18 +420,6 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void) omap_hwmod_setup_one(oh_name); - if (np) { - vbase = of_iomap(np, 0); - of_node_put(np); - } else { - vbase = omap_hwmod_get_mpu_rt_va(oh); - } - - if (!vbase) { - pr_warn("%s: failed to get counter_32k resource\n", __func__); - return -ENXIO; - } - ret = omap_hwmod_enable(oh); if (ret) { pr_warn("%s: failed to enable counter_32k module (%d)\n", @@ -439,13 +427,18 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void) return ret; } - ret = omap_init_clocksource_32k(vbase); - if (ret) { - pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n", - __func__, ret); - omap_hwmod_idle(oh); - } + if (!of_have_populated_dt()) { + void __iomem *vbase; + + vbase = omap_hwmod_get_mpu_rt_va(oh); + ret = omap_init_clocksource_32k(vbase); + if (ret) { + pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n", + __func__, ret); + omap_hwmod_idle(oh); + } + } return ret; } @@ -476,7 +469,64 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, clocksource_gpt.name, clksrc.rate); } -#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER +static void __init __omap_sync32k_timer_init(int clkev_nr, const char *clkev_src, + const char *clkev_prop, int clksrc_nr, const char *clksrc_src, + const char *clksrc_prop, bool gptimer) +{ + omap_clk_init(); + omap_dmtimer_init(); + omap2_gp_clockevent_init(clkev_nr, clkev_src, clkev_prop); + + /* Enable the use of clocksource="gp_timer" kernel parameter */ + if (use_gptimer_clksrc || gptimer) + omap2_gptimer_clocksource_init(clksrc_nr, clksrc_src, + clksrc_prop); + else + omap2_sync32k_clocksource_init(); +} + +void __init omap_init_time(void) +{ + __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon", + 2, "timer_sys_ck", NULL, false); + + if (of_have_populated_dt()) + clocksource_probe(); +} + +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX) +void __init omap3_secure_sync32k_timer_init(void) +{ + __omap_sync32k_timer_init(12, "secure_32k_fck", "ti,timer-secure", + 2, "timer_sys_ck", NULL, false); +} +#endif /* CONFIG_ARCH_OMAP3 */ + +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) +void __init omap3_gptimer_timer_init(void) +{ + __omap_sync32k_timer_init(2, "timer_sys_ck", NULL, + 1, "timer_sys_ck", "ti,timer-alwon", true); +} +#endif + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX) +static void __init omap4_sync32k_timer_init(void) +{ + __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon", + 2, "sys_clkin_ck", NULL, false); +} + +void __init omap4_local_timer_init(void) +{ + omap4_sync32k_timer_init(); + clocksource_probe(); +} +#endif + +#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) + /* * The realtime counter also called master counter, is a free-running * counter, which is related to real time. It produces the count used @@ -488,6 +538,7 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, */ static void __init realtime_counter_init(void) { +#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER void __iomem *base; static struct clk *sys_clk; unsigned long rate; @@ -586,84 +637,15 @@ sysclk1_based: set_cntfreq(); iounmap(base); -} -#else -static inline void __init realtime_counter_init(void) -{} -#endif - -#define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ - clksrc_nr, clksrc_src, clksrc_prop) \ -void __init omap##name##_gptimer_timer_init(void) \ -{ \ - omap_clk_init(); \ - omap_dmtimer_init(); \ - omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ - omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \ - clksrc_prop); \ -} - -#define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ - clksrc_nr, clksrc_src, clksrc_prop) \ -void __init omap##name##_sync32k_timer_init(void) \ -{ \ - omap_clk_init(); \ - omap_dmtimer_init(); \ - omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ - /* Enable the use of clocksource="gp_timer" kernel parameter */ \ - if (use_gptimer_clksrc) \ - omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \ - clksrc_prop); \ - else \ - omap2_sync32k_clocksource_init(); \ -} - -#ifdef CONFIG_ARCH_OMAP2 -OMAP_SYS_32K_TIMER_INIT(2, 1, "timer_32k_ck", "ti,timer-alwon", - 2, "timer_sys_ck", NULL); -#endif /* CONFIG_ARCH_OMAP2 */ - -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX) -OMAP_SYS_32K_TIMER_INIT(3, 1, "timer_32k_ck", "ti,timer-alwon", - 2, "timer_sys_ck", NULL); -OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure", - 2, "timer_sys_ck", NULL); -#endif /* CONFIG_ARCH_OMAP3 */ - -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \ - defined(CONFIG_SOC_AM43XX) -OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL, - 1, "timer_sys_ck", "ti,timer-alwon"); -#endif - -#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ - defined(CONFIG_SOC_DRA7XX) -static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon", - 2, "sys_clkin_ck", NULL); #endif - -#ifdef CONFIG_ARCH_OMAP4 -#ifdef CONFIG_HAVE_ARM_TWD -void __init omap4_local_timer_init(void) -{ - omap4_sync32k_timer_init(); - clocksource_of_init(); -} -#else -void __init omap4_local_timer_init(void) -{ - omap4_sync32k_timer_init(); } -#endif /* CONFIG_HAVE_ARM_TWD */ -#endif /* CONFIG_ARCH_OMAP4 */ -#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) void __init omap5_realtime_timer_init(void) { omap4_sync32k_timer_init(); realtime_counter_init(); - clocksource_of_init(); + clocksource_probe(); } #endif /* CONFIG_SOC_OMAP5 || CONFIG_SOC_DRA7XX */ diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index d44d311704ba..2028167fff31 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -280,10 +280,6 @@ void omap3_vc_set_pmic_signaling(int core_next_state) } } -#define PRM_POLCTRL_TWL_MASK (OMAP3430_PRM_POLCTRL_CLKREQ_POL | \ - OMAP3430_PRM_POLCTRL_CLKREQ_POL) -#define PRM_POLCTRL_TWL_VAL OMAP3430_PRM_POLCTRL_CLKREQ_POL - /* * Configure signal polarity for sys_clkreq and sys_off_mode pins * as the default values are wrong and can cause the system to hang diff --git a/arch/arm/mach-prima2/hotplug.c b/arch/arm/mach-prima2/hotplug.c index 0ab2f8bae28e..a728c78b996f 100644 --- a/arch/arm/mach-prima2/hotplug.c +++ b/arch/arm/mach-prima2/hotplug.c @@ -32,7 +32,7 @@ static inline void platform_do_lowpower(unsigned int cpu) * * Called with IRQs disabled */ -void __ref sirfsoc_cpu_die(unsigned int cpu) +void sirfsoc_cpu_die(unsigned int cpu) { platform_do_lowpower(cpu); } diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 5851f4c254c1..a7dae60810e8 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -26,6 +26,7 @@ #include <linux/dm9000.h> #include <linux/leds.h> #include <linux/rtc-v3020.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/i2c.h> @@ -305,11 +306,14 @@ static inline void cm_x300_init_lcd(void) {} #endif #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static struct pwm_lookup cm_x300_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 10000, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data cm_x300_backlight_data = { - .pwm_id = 2, .max_brightness = 100, .dft_brightness = 100, - .pwm_period_ns = 10000, .enable_gpio = -1, }; @@ -323,6 +327,7 @@ static struct platform_device cm_x300_backlight_device = { static void cm_x300_init_bl(void) { + pwm_add_table(cm_x300_pwm_lookup, ARRAY_SIZE(cm_x300_pwm_lookup)); platform_device_register(&cm_x300_backlight_device); } #else diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c index 3aa264640c9d..db20d25daaab 100644 --- a/arch/arm/mach-pxa/colibri-pxa270-income.c +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -20,6 +20,7 @@ #include <linux/ioport.h> #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/i2c/pxa-i2c.h> @@ -184,11 +185,14 @@ static inline void income_lcd_init(void) {} * Backlight ******************************************************************************/ #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static struct pwm_lookup income_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data income_backlight_data = { - .pwm_id = 0, .max_brightness = 0x3ff, .dft_brightness = 0x1ff, - .pwm_period_ns = 1000000, .enable_gpio = -1, }; @@ -202,6 +206,7 @@ static struct platform_device income_backlight = { static void __init income_pwm_init(void) { + pwm_add_table(income_pwm_lookup, ARRAY_SIZE(income_pwm_lookup)); platform_device_register(&income_backlight); } #else diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index c62473235a13..2a6e0ae2b920 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -395,6 +395,26 @@ static struct resource pxa_ir_resources[] = { .end = IRQ_ICP, .flags = IORESOURCE_IRQ, }, + [3] = { + .start = 0x40800000, + .end = 0x4080001b, + .flags = IORESOURCE_MEM, + }, + [4] = { + .start = 0x40700000, + .end = 0x40700023, + .flags = IORESOURCE_MEM, + }, + [5] = { + .start = 17, + .end = 17, + .flags = IORESOURCE_DMA, + }, + [6] = { + .start = 18, + .end = 18, + .flags = IORESOURCE_DMA, + }, }; struct platform_device pxa_device_ficp = { diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index ab93441e596e..9a9c15bfcd34 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/delay.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/input.h> #include <linux/gpio.h> @@ -49,11 +50,14 @@ #define GPIO19_GEN1_CAM_RST 19 #define GPIO28_GEN2_CAM_RST 28 +static struct pwm_lookup ezx_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78700, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data ezx_backlight_data = { - .pwm_id = 0, .max_brightness = 1023, .dft_brightness = 1023, - .pwm_period_ns = 78770, .enable_gpio = -1, }; @@ -817,6 +821,7 @@ static void __init a780_init(void) platform_device_register(&a780_camera); } + pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup)); platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); platform_add_devices(ARRAY_AND_SIZE(a780_devices)); } diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 5fb41ad6e3bc..b076a835eb21 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -557,10 +557,8 @@ static struct platform_device hx4700_lcd = { */ static struct platform_pwm_backlight_data backlight_data = { - .pwm_id = -1, /* Superseded by pwm_lookup */ .max_brightness = 200, .dft_brightness = 100, - .pwm_period_ns = 30923, .enable_gpio = -1, }; @@ -630,7 +628,6 @@ static struct spi_board_info tsc2046_board_info[] __initdata = { static struct pxa2xx_spi_master pxa_ssp2_master_info = { .num_chipselect = 1, - .clock_enable = CKEN_SSP2, .enable_dma = 1, }; diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index 9b0eb0252af6..a1869f9b6219 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -116,13 +116,11 @@ static struct spi_board_info mcp251x_board_info[] = { }; static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = { - .clock_enable = CKEN_SSP3, .num_chipselect = 2, .enable_dma = 1 }; static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = { - .clock_enable = CKEN_SSP4, .num_chipselect = 2, .enable_dma = 1 }; diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index ba6a6e1d29e9..5f6b850ebe33 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -52,9 +52,9 @@ #define GPIO101_MAGICIAN_KEY_VOL_DOWN 101 #define GPIO102_MAGICIAN_KEY_PHONE 102 #define GPIO103_MAGICIAN_LED_KP 103 -#define GPIO104_MAGICIAN_LCD_POWER_1 104 -#define GPIO105_MAGICIAN_LCD_POWER_2 105 -#define GPIO106_MAGICIAN_LCD_POWER_3 106 +#define GPIO104_MAGICIAN_LCD_VOFF_EN 104 +#define GPIO105_MAGICIAN_LCD_VON_EN 105 +#define GPIO106_MAGICIAN_LCD_DCDC_NRESET 106 #define GPIO107_MAGICIAN_DS1WM_IRQ 107 #define GPIO108_MAGICIAN_GSM_READY 108 #define GPIO114_MAGICIAN_UNKNOWN 114 @@ -78,43 +78,51 @@ * CPLD EGPIOs */ -#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO +#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO #define MAGICIAN_EGPIO(reg,bit) \ (MAGICIAN_EGPIO_BASE + 8*reg + bit) /* output */ -#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2) -#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5) -#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6) -#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7) -#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0) -#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1) -#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2) -#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3) -#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4) -#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5) -#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6) -#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7) -#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0) -#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1) -#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2) -#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3) -#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4) -#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5) -#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7) +#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2) +#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5) +#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6) +#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7) +#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0) +#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1) +#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2) +#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3) +#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4) +#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5) +#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6) +#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7) +#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0) +#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1) +#define EGPIO_MAGICIAN_IR_RX_SHUTDOWN MAGICIAN_EGPIO(2, 2) +#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3) +#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4) +#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5) +#define EGPIO_MAGICIAN_NICD_CHARGE MAGICIAN_EGPIO(2, 6) +#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7) /* input */ -#define EGPIO_MAGICIAN_CABLE_STATE_AC MAGICIAN_EGPIO(4, 0) -#define EGPIO_MAGICIAN_CABLE_STATE_USB MAGICIAN_EGPIO(4, 1) +/* USB or AC charger type */ +#define EGPIO_MAGICIAN_CABLE_TYPE MAGICIAN_EGPIO(4, 0) +/* + * Vbus is detected + * FIXME behaves like (6,3), may differ for host/device + */ +#define EGPIO_MAGICIAN_CABLE_VBUS MAGICIAN_EGPIO(4, 1) -#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0) -#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1) -#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2) -#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3) -#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4) +#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0) +#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1) +#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2) +#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3) +#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4) -#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1) +#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1) +/* FIXME behaves like (4,1), may differ for host/device */ +#define EGPIO_MAGICIAN_CABLE_INSERTED MAGICIAN_EGPIO(6, 3) #endif /* _MAGICIAN_H_ */ diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h index 599b925a657c..1a4291936c58 100644 --- a/arch/arm/mach-pxa/include/mach/pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/pxa27x.h @@ -19,7 +19,7 @@ #define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ #define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ -extern int __init pxa27x_set_pwrmode(unsigned int mode); +extern int pxa27x_set_pwrmode(unsigned int mode); extern void pxa27x_cpu_pm_enter(suspend_state_t state); #endif /* __MACH_PXA27x_H */ diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 4823d972e647..5fcd4f094900 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -23,6 +23,7 @@ #include <linux/ioport.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/smc91x.h> @@ -271,11 +272,14 @@ static struct platform_device lpd270_flash_device[2] = { }, }; +static struct pwm_lookup lpd270_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data lpd270_backlight_data = { - .pwm_id = 0, .max_brightness = 1, .dft_brightness = 1, - .pwm_period_ns = 78770, .enable_gpio = -1, }; @@ -474,6 +478,7 @@ static void __init lpd270_init(void) */ ARB_CNTRL = ARB_CORE_PARK | 0x234; + pwm_add_table(lpd270_pwm_lookup, ARRAY_SIZE(lpd270_pwm_lookup)); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); pxa_set_ac97_info(NULL); diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index a9761c293028..896b268c3ab7 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -24,8 +24,10 @@ #include <linux/mfd/htc-pasic3.h> #include <linux/mtd/physmap.h> #include <linux/pda_power.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/regulator/driver.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/gpio-regulator.h> #include <linux/regulator/machine.h> #include <linux/usb/gpio_vbus.h> @@ -43,6 +45,12 @@ #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/usb-ohci-pxa27x.h> +#include <linux/regulator/max1586.h> + +#include <linux/platform_data/pxa2xx_udc.h> +#include <mach/udc.h> +#include <mach/pxa27x-udc.h> + #include "devices.h" #include "generic.h" @@ -52,36 +60,36 @@ static unsigned long magician_pin_config[] __initdata = { GPIO20_nSDCS_2, GPIO21_nSDCS_3, GPIO15_nCS_1, - GPIO78_nCS_2, /* PASIC3 */ - GPIO79_nCS_3, /* EGPIO CPLD */ + GPIO78_nCS_2, /* PASIC3 */ + GPIO79_nCS_3, /* EGPIO CPLD */ GPIO80_nCS_4, GPIO33_nCS_5, - /* I2C */ + /* I2C UDA1380 + OV9640 */ GPIO117_I2C_SCL, GPIO118_I2C_SDA, - /* PWM 0 */ + /* PWM 0 - LCD backlight */ GPIO16_PWM0_OUT, - /* I2S */ + /* I2S UDA1380 capture */ GPIO28_I2S_BITCLK_OUT, GPIO29_I2S_SDATA_IN, GPIO31_I2S_SYNC, GPIO113_I2S_SYSCLK, - /* SSP 1 */ + /* SSP 1 UDA1380 playback */ GPIO23_SSP1_SCLK, GPIO24_SSP1_SFRM, GPIO25_SSP1_TXD, - /* SSP 2 */ + /* SSP 2 TSC2046 touchscreen */ GPIO19_SSP2_SCLK, GPIO14_SSP2_SFRM, GPIO89_SSP2_TXD, GPIO88_SSP2_RXD, - /* MMC */ + /* MMC/SD/SDHC slot */ GPIO32_MMC_CLK, GPIO92_MMC_DAT_0, GPIO109_MMC_DAT_1, @@ -92,7 +100,7 @@ static unsigned long magician_pin_config[] __initdata = { /* LCD */ GPIOxx_LCD_TFT_16BPP, - /* QCI */ + /* QCI camera interface */ GPIO12_CIF_DD_7, GPIO17_CIF_DD_6, GPIO50_CIF_DD_3, @@ -120,12 +128,13 @@ static unsigned long magician_pin_config[] __initdata = { }; /* - * IRDA + * IrDA */ static struct pxaficp_platform_data magician_ficp_info = { .gpio_pwdown = GPIO83_MAGICIAN_nIR_EN, .transceiver_cap = IR_SIRMODE | IR_OFF, + .gpio_pwdown_inverted = 0, }; /* @@ -134,11 +143,11 @@ static struct pxaficp_platform_data magician_ficp_info = { #define INIT_KEY(_code, _gpio, _desc) \ { \ - .code = KEY_##_code, \ - .gpio = _gpio, \ - .desc = _desc, \ - .type = EV_KEY, \ - .wakeup = 1, \ + .code = KEY_##_code, \ + .gpio = _gpio, \ + .desc = _desc, \ + .type = EV_KEY, \ + .wakeup = 1, \ } static struct gpio_keys_button magician_button_table[] = { @@ -160,164 +169,162 @@ static struct gpio_keys_button magician_button_table[] = { }; static struct gpio_keys_platform_data gpio_keys_data = { - .buttons = magician_button_table, - .nbuttons = ARRAY_SIZE(magician_button_table), + .buttons = magician_button_table, + .nbuttons = ARRAY_SIZE(magician_button_table), }; static struct platform_device gpio_keys = { - .name = "gpio-keys", - .dev = { + .name = "gpio-keys", + .dev = { .platform_data = &gpio_keys_data, }, - .id = -1, + .id = -1, }; - /* * EGPIO (Xilinx CPLD) * - * 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input + * 32-bit aligned 8-bit registers + * 16 possible registers (reg windows size), only 7 used: + * 3x output, 1x irq, 3x input */ static struct resource egpio_resources[] = { [0] = { - .start = PXA_CS3_PHYS, - .end = PXA_CS3_PHYS + 0x20 - 1, - .flags = IORESOURCE_MEM, + .start = PXA_CS3_PHYS, + .end = PXA_CS3_PHYS + 0x20 - 1, + .flags = IORESOURCE_MEM, }, [1] = { - .start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), - .end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), - .flags = IORESOURCE_IRQ, + .start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), + .flags = IORESOURCE_IRQ, }, }; static struct htc_egpio_chip egpio_chips[] = { [0] = { - .reg_start = 0, - .gpio_base = MAGICIAN_EGPIO(0, 0), - .num_gpios = 24, - .direction = HTC_EGPIO_OUTPUT, - .initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */ + .reg_start = 0, + .gpio_base = MAGICIAN_EGPIO(0, 0), + .num_gpios = 24, + .direction = HTC_EGPIO_OUTPUT, + /* + * Depends on modules configuration + */ + .initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */ }, [1] = { - .reg_start = 4, - .gpio_base = MAGICIAN_EGPIO(4, 0), - .num_gpios = 24, - .direction = HTC_EGPIO_INPUT, + .reg_start = 4, + .gpio_base = MAGICIAN_EGPIO(4, 0), + .num_gpios = 24, + .direction = HTC_EGPIO_INPUT, }, }; static struct htc_egpio_platform_data egpio_info = { - .reg_width = 8, - .bus_width = 32, - .irq_base = IRQ_BOARD_START, - .num_irqs = 4, - .ack_register = 3, - .chip = egpio_chips, - .num_chips = ARRAY_SIZE(egpio_chips), + .reg_width = 8, + .bus_width = 32, + .irq_base = IRQ_BOARD_START, + .num_irqs = 4, + .ack_register = 3, + .chip = egpio_chips, + .num_chips = ARRAY_SIZE(egpio_chips), }; static struct platform_device egpio = { - .name = "htc-egpio", - .id = -1, - .resource = egpio_resources, - .num_resources = ARRAY_SIZE(egpio_resources), + .name = "htc-egpio", + .id = -1, + .resource = egpio_resources, + .num_resources = ARRAY_SIZE(egpio_resources), .dev = { .platform_data = &egpio_info, }, }; /* - * LCD - Toppoly TD028STEB1 or Samsung LTP280QV + * PXAFB LCD - Toppoly TD028STEB1 or Samsung LTP280QV */ static struct pxafb_mode_info toppoly_modes[] = { { - .pixclock = 96153, - .bpp = 16, - .xres = 240, - .yres = 320, - .hsync_len = 11, - .vsync_len = 3, - .left_margin = 19, - .upper_margin = 2, - .right_margin = 10, - .lower_margin = 2, - .sync = 0, + .pixclock = 96153, + .bpp = 16, + .xres = 240, + .yres = 320, + .hsync_len = 11, + .vsync_len = 3, + .left_margin = 19, + .upper_margin = 2, + .right_margin = 10, + .lower_margin = 2, + .sync = 0, }, }; static struct pxafb_mode_info samsung_modes[] = { { - .pixclock = 96153, - .bpp = 16, - .xres = 240, - .yres = 320, - .hsync_len = 8, - .vsync_len = 4, - .left_margin = 9, - .upper_margin = 4, - .right_margin = 9, - .lower_margin = 4, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .pixclock = 226469, + .bpp = 16, + .xres = 240, + .yres = 320, + .hsync_len = 8, + .vsync_len = 4, + .left_margin = 9, + .upper_margin = 4, + .right_margin = 9, + .lower_margin = 4, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, }, }; static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si) { - pr_debug("Toppoly LCD power\n"); + pr_debug("Toppoly LCD power: %s\n", on ? "on" : "off"); if (on) { - pr_debug("on\n"); gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1); - gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1); + gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1); udelay(2000); gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1); udelay(2000); /* FIXME: enable LCDC here */ udelay(2000); - gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1); + gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1); udelay(2000); - gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1); + gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1); } else { - pr_debug("off\n"); msleep(15); - gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0); + gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0); udelay(500); - gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0); + gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0); udelay(1000); - gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0); + gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0); gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0); } } static void samsung_lcd_power(int on, struct fb_var_screeninfo *si) { - pr_debug("Samsung LCD power\n"); + pr_debug("Samsung LCD power: %s\n", on ? "on" : "off"); if (on) { - pr_debug("on\n"); if (system_rev < 3) gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1); else gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1); - mdelay(10); - gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1); - mdelay(10); - gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1); - mdelay(30); - gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1); - mdelay(10); + mdelay(6); + gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1); + mdelay(6); /* Avdd -> Voff >5ms */ + gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1); + mdelay(16); /* Voff -> Von >(5+10)ms */ + gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1); } else { - pr_debug("off\n"); - mdelay(10); - gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0); - mdelay(30); - gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0); - mdelay(10); - gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0); - mdelay(10); + gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0); + mdelay(16); + gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0); + mdelay(6); + gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0); + mdelay(6); if (system_rev < 3) gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0); else @@ -326,29 +333,43 @@ static void samsung_lcd_power(int on, struct fb_var_screeninfo *si) } static struct pxafb_mach_info toppoly_info = { - .modes = toppoly_modes, - .num_modes = 1, - .fixed_modes = 1, - .lcd_conn = LCD_COLOR_TFT_16BPP, - .pxafb_lcd_power = toppoly_lcd_power, + .modes = toppoly_modes, + .num_modes = 1, + .fixed_modes = 1, + .lcd_conn = LCD_COLOR_TFT_16BPP, + .pxafb_lcd_power = toppoly_lcd_power, }; static struct pxafb_mach_info samsung_info = { - .modes = samsung_modes, - .num_modes = 1, - .fixed_modes = 1, - .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |\ - LCD_ALTERNATE_MAPPING, - .pxafb_lcd_power = samsung_lcd_power, + .modes = samsung_modes, + .num_modes = 1, + .fixed_modes = 1, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL | + LCD_ALTERNATE_MAPPING, + .pxafb_lcd_power = samsung_lcd_power, }; /* * Backlight */ +static struct pwm_lookup magician_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 30923, + PWM_POLARITY_NORMAL), +}; + + /* + * fixed regulator for pwm_backlight + */ + +static struct regulator_consumer_supply pwm_backlight_supply[] = { + REGULATOR_SUPPLY("power", "pwm_backlight"), +}; + + static struct gpio magician_bl_gpios[] = { - { EGPIO_MAGICIAN_BL_POWER, GPIOF_DIR_OUT, "Backlight power" }, - { EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" }, + { EGPIO_MAGICIAN_BL_POWER, GPIOF_DIR_OUT, "Backlight power" }, + { EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" }, }; static int magician_backlight_init(struct device *dev) @@ -358,6 +379,7 @@ static int magician_backlight_init(struct device *dev) static int magician_backlight_notify(struct device *dev, int brightness) { + pr_debug("Brightness = %i\n", brightness); gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness); if (brightness >= 200) { gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1); @@ -373,28 +395,33 @@ static void magician_backlight_exit(struct device *dev) gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios)); } +/* + * LCD PWM backlight (main) + * + * MP1521 frequency should be: + * 100-400 Hz = 2 .5*10^6 - 10 *10^6 ns + */ + static struct platform_pwm_backlight_data backlight_data = { - .pwm_id = 0, - .max_brightness = 272, - .dft_brightness = 100, - .pwm_period_ns = 30923, - .enable_gpio = -1, - .init = magician_backlight_init, - .notify = magician_backlight_notify, - .exit = magician_backlight_exit, + .max_brightness = 272, + .dft_brightness = 100, + .enable_gpio = -1, + .init = magician_backlight_init, + .notify = magician_backlight_notify, + .exit = magician_backlight_exit, }; static struct platform_device backlight = { - .name = "pwm-backlight", - .id = -1, - .dev = { - .parent = &pxa27x_device_pwm0.dev, - .platform_data = &backlight_data, + .name = "pwm-backlight", + .id = -1, + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &backlight_data, }, }; /* - * LEDs + * GPIO LEDs, Phone keys backlight, vibra */ static struct gpio_led gpio_leds[] = { @@ -416,69 +443,32 @@ static struct gpio_led_platform_data gpio_led_info = { }; static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { + .name = "leds-gpio", + .id = -1, + .dev = { .platform_data = &gpio_led_info, }, }; -static struct pasic3_led pasic3_leds[] = { - { - .led = { - .name = "magician:red", - .default_trigger = "ds2760-battery.0-charging", - }, - .hw_num = 0, - .bit2 = PASIC3_BIT2_LED0, - .mask = PASIC3_MASK_LED0, - }, - { - .led = { - .name = "magician:green", - .default_trigger = "ds2760-battery.0-charging-or-full", - }, - .hw_num = 1, - .bit2 = PASIC3_BIT2_LED1, - .mask = PASIC3_MASK_LED1, - }, - { - .led = { - .name = "magician:blue", - .default_trigger = "bluetooth", - }, - .hw_num = 2, - .bit2 = PASIC3_BIT2_LED2, - .mask = PASIC3_MASK_LED2, - }, -}; - -static struct pasic3_leds_machinfo pasic3_leds_info = { - .num_leds = ARRAY_SIZE(pasic3_leds), - .power_gpio = EGPIO_MAGICIAN_LED_POWER, - .leds = pasic3_leds, -}; - /* * PASIC3 with DS1WM */ static struct resource pasic3_resources[] = { [0] = { - .start = PXA_CS2_PHYS, + .start = PXA_CS2_PHYS, .end = PXA_CS2_PHYS + 0x1b, - .flags = IORESOURCE_MEM, + .flags = IORESOURCE_MEM, }, /* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */ [1] = { - .start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), - .end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + .start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; static struct pasic3_platform_data pasic3_platform_data = { - .led_pdata = &pasic3_leds_info, .clock_rate = 4000000, }; @@ -493,25 +483,42 @@ static struct platform_device pasic3 = { }; /* - * USB "Transceiver" + * PXA UDC + */ + +static void magician_udc_command(int cmd) +{ + if (cmd == PXA2XX_UDC_CMD_CONNECT) + UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE; + else if (cmd == PXA2XX_UDC_CMD_DISCONNECT) + UP2OCR &= ~(UP2OCR_DPPUE | UP2OCR_DPPUBE); +} + +static struct pxa2xx_udc_mach_info magician_udc_info __initdata = { + .udc_command = magician_udc_command, + .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN, +}; + +/* + * USB device VBus detection */ static struct resource gpio_vbus_resource = { - .flags = IORESOURCE_IRQ, - .start = IRQ_MAGICIAN_VBUS, - .end = IRQ_MAGICIAN_VBUS, + .flags = IORESOURCE_IRQ, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, }; static struct gpio_vbus_mach_info gpio_vbus_info = { - .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN, - .gpio_vbus = EGPIO_MAGICIAN_CABLE_STATE_USB, + .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN, + .gpio_vbus = EGPIO_MAGICIAN_CABLE_VBUS, }; static struct platform_device gpio_vbus = { - .name = "gpio-vbus", - .id = -1, - .num_resources = 1, - .resource = &gpio_vbus_resource, + .name = "gpio-vbus", + .id = -1, + .num_resources = 1, + .resource = &gpio_vbus_resource, .dev = { .platform_data = &gpio_vbus_info, }, @@ -521,19 +528,60 @@ static struct platform_device gpio_vbus = { * External power */ -static int power_supply_init(struct device *dev) +static int magician_supply_init(struct device *dev) +{ + int ret = -1; + + ret = gpio_request(EGPIO_MAGICIAN_CABLE_TYPE, "Cable is AC charger"); + if (ret) { + pr_err("Cannot request AC/USB charger GPIO (%i)\n", ret); + goto err_ac; + } + + ret = gpio_request(EGPIO_MAGICIAN_CABLE_INSERTED, "Cable inserted"); + if (ret) { + pr_err("Cannot request cable detection GPIO (%i)\n", ret); + goto err_usb; + } + + return 0; + +err_usb: + gpio_free(EGPIO_MAGICIAN_CABLE_TYPE); +err_ac: + return ret; +} + +static void magician_set_charge(int flags) { - return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC"); + if (flags & PDA_POWER_CHARGE_AC) { + pr_debug("Charging from AC\n"); + gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1); + } else if (flags & PDA_POWER_CHARGE_USB) { + pr_debug("Charging from USB\n"); + gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1); + } else { + pr_debug("Charging disabled\n"); + gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 0); + } } static int magician_is_ac_online(void) { - return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC); + return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) && + gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE); /* AC=1 */ } -static void power_supply_exit(struct device *dev) +static int magician_is_usb_online(void) { - gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC); + return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) && + (!gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE)); /* USB=0 */ +} + +static void magician_supply_exit(struct device *dev) +{ + gpio_free(EGPIO_MAGICIAN_CABLE_INSERTED); + gpio_free(EGPIO_MAGICIAN_CABLE_TYPE); } static char *magician_supplicants[] = { @@ -541,38 +589,40 @@ static char *magician_supplicants[] = { }; static struct pda_power_pdata power_supply_info = { - .init = power_supply_init, - .is_ac_online = magician_is_ac_online, - .exit = power_supply_exit, - .supplied_to = magician_supplicants, - .num_supplicants = ARRAY_SIZE(magician_supplicants), + .init = magician_supply_init, + .exit = magician_supply_exit, + .is_ac_online = magician_is_ac_online, + .is_usb_online = magician_is_usb_online, + .set_charge = magician_set_charge, + .supplied_to = magician_supplicants, + .num_supplicants = ARRAY_SIZE(magician_supplicants), }; static struct resource power_supply_resources[] = { [0] = { - .name = "ac", - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | - IORESOURCE_IRQ_LOWEDGE, - .start = IRQ_MAGICIAN_VBUS, - .end = IRQ_MAGICIAN_VBUS, + .name = "ac", + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | + IORESOURCE_IRQ_LOWEDGE, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, }, [1] = { - .name = "usb", - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | - IORESOURCE_IRQ_LOWEDGE, - .start = IRQ_MAGICIAN_VBUS, - .end = IRQ_MAGICIAN_VBUS, + .name = "usb", + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | + IORESOURCE_IRQ_LOWEDGE, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, }, }; static struct platform_device power_supply = { - .name = "pda-power", - .id = -1, - .dev = { + .name = "pda-power", + .id = -1, + .dev = { .platform_data = &power_supply_info, }, - .resource = power_supply_resources, - .num_resources = ARRAY_SIZE(power_supply_resources), + .resource = power_supply_resources, + .num_resources = ARRAY_SIZE(power_supply_resources), }; /* @@ -586,11 +636,12 @@ static struct regulator_consumer_supply bq24022_consumers[] = { static struct regulator_init_data bq24022_init_data = { .constraints = { - .max_uA = 500000, - .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS, + .max_uA = 500000, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT | + REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), - .consumer_supplies = bq24022_consumers, + .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), + .consumer_supplies = bq24022_consumers, }; static struct gpio bq24022_gpios[] = { @@ -603,39 +654,85 @@ static struct gpio_regulator_state bq24022_states[] = { }; static struct gpio_regulator_config bq24022_info = { - .supply_name = "bq24022", + .supply_name = "bq24022", - .enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, - .enable_high = 0, - .enabled_at_boot = 0, + .enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, + .enable_high = 0, + .enabled_at_boot = 1, - .gpios = bq24022_gpios, - .nr_gpios = ARRAY_SIZE(bq24022_gpios), + .gpios = bq24022_gpios, + .nr_gpios = ARRAY_SIZE(bq24022_gpios), - .states = bq24022_states, - .nr_states = ARRAY_SIZE(bq24022_states), + .states = bq24022_states, + .nr_states = ARRAY_SIZE(bq24022_states), - .type = REGULATOR_CURRENT, - .init_data = &bq24022_init_data, + .type = REGULATOR_CURRENT, + .init_data = &bq24022_init_data, }; static struct platform_device bq24022 = { - .name = "gpio-regulator", - .id = -1, - .dev = { + .name = "gpio-regulator", + .id = -1, + .dev = { .platform_data = &bq24022_info, }, }; /* + * Vcore regulator MAX1587A + */ + +static struct regulator_consumer_supply magician_max1587a_consumers[] = { + REGULATOR_SUPPLY("vcc_core", NULL), +}; + +static struct regulator_init_data magician_max1587a_v3_info = { + .constraints = { + .name = "vcc_core range", + .min_uV = 700000, + .max_uV = 1475000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .consumer_supplies = magician_max1587a_consumers, + .num_consumer_supplies = ARRAY_SIZE(magician_max1587a_consumers), +}; + +static struct max1586_subdev_data magician_max1587a_subdevs[] = { + { + .name = "vcc_core", + .id = MAX1586_V3, + .platform_data = &magician_max1587a_v3_info, + } +}; + +static struct max1586_platform_data magician_max1587a_info = { + .subdevs = magician_max1587a_subdevs, + .num_subdevs = ARRAY_SIZE(magician_max1587a_subdevs), + /* + * NOTICE measured directly on the PCB (board_id == 0x3a), but + * if R24 is present, it will boost the voltage + * (write 1.475V, get 1.645V and smoke) + */ + .v3_gain = MAX1586_GAIN_NO_R24, +}; + +static struct i2c_board_info magician_pwr_i2c_board_info[] __initdata = { + { + I2C_BOARD_INFO("max1586", 0x14), + .platform_data = &magician_max1587a_info, + }, +}; + +/* * MMC/SD */ static int magician_mci_init(struct device *dev, - irq_handler_t detect_irq, void *data) + irq_handler_t detect_irq, void *data) { return request_irq(IRQ_MAGICIAN_SD, detect_irq, 0, - "mmc card detect", data); + "mmc card detect", data); } static void magician_mci_exit(struct device *dev, void *data) @@ -644,9 +741,9 @@ static void magician_mci_exit(struct device *dev, void *data) } static struct pxamci_platform_data magician_mci_info = { - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .init = magician_mci_init, - .exit = magician_mci_exit, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = magician_mci_init, + .exit = magician_mci_exit, .gpio_card_detect = -1, .gpio_card_ro = EGPIO_MAGICIAN_nSD_READONLY, .gpio_card_ro_invert = 1, @@ -660,47 +757,102 @@ static struct pxamci_platform_data magician_mci_info = { static struct pxaohci_platform_data magician_ohci_info = { .port_mode = PMM_PERPORT_MODE, - .flags = ENABLE_PORT1 | ENABLE_PORT3 | POWER_CONTROL_LOW, + /* port1: CSR Bluetooth, port2: OTG with UDC */ + .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW, .power_budget = 0, + .power_on_delay = 100, }; - /* * StrataFlash */ +static int magician_flash_init(struct platform_device *pdev) +{ + int ret = gpio_request(EGPIO_MAGICIAN_FLASH_VPP, "flash Vpp enable"); + + if (ret) { + pr_err("Cannot request flash enable GPIO (%i)\n", ret); + return ret; + } + + ret = gpio_direction_output(EGPIO_MAGICIAN_FLASH_VPP, 1); + if (ret) { + pr_err("Cannot set direction for flash enable (%i)\n", ret); + gpio_free(EGPIO_MAGICIAN_FLASH_VPP); + } + + return ret; +} + static void magician_set_vpp(struct platform_device *pdev, int vpp) { gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp); } +static void magician_flash_exit(struct platform_device *pdev) +{ + gpio_free(EGPIO_MAGICIAN_FLASH_VPP); +} + static struct resource strataflash_resource = { - .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + SZ_64M - 1, - .flags = IORESOURCE_MEM, + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, }; +static struct mtd_partition magician_flash_parts[] = { + { + .name = "Bootloader", + .offset = 0x0, + .size = 0x40000, + .mask_flags = MTD_WRITEABLE, /* EXPERIMENTAL */ + }, + { + .name = "Linux Kernel", + .offset = 0x40000, + .size = MTDPART_SIZ_FULL, + }, +}; + +/* + * physmap-flash driver + */ + static struct physmap_flash_data strataflash_data = { - .width = 4, - .set_vpp = magician_set_vpp, + .width = 4, + .init = magician_flash_init, + .set_vpp = magician_set_vpp, + .exit = magician_flash_exit, + .parts = magician_flash_parts, + .nr_parts = ARRAY_SIZE(magician_flash_parts), }; static struct platform_device strataflash = { - .name = "physmap-flash", - .id = -1, - .resource = &strataflash_resource, - .num_resources = 1, + .name = "physmap-flash", + .id = -1, + .resource = &strataflash_resource, + .num_resources = 1, .dev = { .platform_data = &strataflash_data, }, }; /* - * I2C + * PXA I2C main controller */ static struct i2c_pxa_platform_data i2c_info = { - .fast_mode = 1, + /* OV9640 I2C device doesn't support fast mode */ + .fast_mode = 0, +}; + +/* + * PXA I2C power controller + */ + +static struct i2c_pxa_platform_data magician_i2c_power_info = { + .fast_mode = 1, }; /* @@ -720,12 +872,13 @@ static struct platform_device *devices[] __initdata = { }; static struct gpio magician_global_gpios[] = { - { GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" }, + { GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" }, { GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" }, - { GPIO104_MAGICIAN_LCD_POWER_1, GPIOF_OUT_INIT_LOW, "LCD power 1" }, - { GPIO105_MAGICIAN_LCD_POWER_2, GPIOF_OUT_INIT_LOW, "LCD power 2" }, - { GPIO106_MAGICIAN_LCD_POWER_3, GPIOF_OUT_INIT_LOW, "LCD power 3" }, - { GPIO83_MAGICIAN_nIR_EN, GPIOF_OUT_INIT_HIGH, "nIR_EN" }, + + /* NOTICE valid LCD init sequence */ + { GPIO106_MAGICIAN_LCD_DCDC_NRESET, GPIOF_OUT_INIT_LOW, "LCD DCDC nreset" }, + { GPIO104_MAGICIAN_LCD_VOFF_EN, GPIOF_OUT_INIT_LOW, "LCD VOFF enable" }, + { GPIO105_MAGICIAN_LCD_VON_EN, GPIOF_OUT_INIT_LOW, "LCD VON enable" }, }; static void __init magician_init(void) @@ -737,44 +890,55 @@ static void __init magician_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config)); err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios)); if (err) - pr_err("magician: Failed to request GPIOs: %d\n", err); + pr_err("magician: Failed to request global GPIOs: %d\n", err); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - platform_add_devices(ARRAY_AND_SIZE(devices)); + pwm_add_table(magician_pwm_lookup, ARRAY_SIZE(magician_pwm_lookup)); pxa_set_ficp_info(&magician_ficp_info); - pxa27x_set_i2c_power_info(NULL); + pxa27x_set_i2c_power_info(&magician_i2c_power_info); pxa_set_i2c_info(&i2c_info); + + i2c_register_board_info(1, + ARRAY_AND_SIZE(magician_pwr_i2c_board_info)); + pxa_set_mci_info(&magician_mci_info); pxa_set_ohci_info(&magician_ohci_info); + pxa_set_udc_info(&magician_udc_info); /* Check LCD type we have */ cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000); if (cpld) { - u8 board_id = __raw_readb(cpld+0x14); + u8 board_id = __raw_readb(cpld + 0x14); + iounmap(cpld); system_rev = board_id & 0x7; lcd_select = board_id & 0x8; pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly"); if (lcd_select && (system_rev < 3)) + /* NOTICE valid LCD init sequence */ gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER, - GPIOF_OUT_INIT_LOW, "SAMSUNG_POWER"); - pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info); + GPIOF_OUT_INIT_LOW, "Samsung LCD Power"); + pxa_set_fb_info(NULL, + lcd_select ? &samsung_info : &toppoly_info); } else pr_err("LCD detection: CPLD mapping failed\n"); -} + regulator_register_always_on(0, "power", pwm_backlight_supply, + ARRAY_SIZE(pwm_backlight_supply), 5000000); + + platform_add_devices(ARRAY_AND_SIZE(devices)); +} MACHINE_START(MAGICIAN, "HTC Magician") - .atag_offset = 0x100, - .map_io = pxa27x_map_io, - .nr_irqs = MAGICIAN_NR_IRQS, - .init_irq = pxa27x_init_irq, - .handle_irq = pxa27x_handle_irq, - .init_machine = magician_init, + .atag_offset = 0x100, + .map_io = pxa27x_map_io, + .nr_irqs = MAGICIAN_NR_IRQS, + .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, + .init_machine = magician_init, .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 2c0658cf6be2..c3a87c176d72 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -26,6 +26,7 @@ #include <linux/mtd/partitions.h> #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/smc91x.h> #include <linux/i2c/pxa-i2c.h> @@ -248,11 +249,14 @@ static struct platform_device mst_flash_device[2] = { }; #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pwm_lookup mainstone_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data mainstone_backlight_data = { - .pwm_id = 0, .max_brightness = 1023, .dft_brightness = 1023, - .pwm_period_ns = 78770, .enable_gpio = -1, }; @@ -266,9 +270,16 @@ static struct platform_device mainstone_backlight_device = { static void __init mainstone_backlight_register(void) { - int ret = platform_device_register(&mainstone_backlight_device); - if (ret) + int ret; + + pwm_add_table(mainstone_pwm_lookup, ARRAY_SIZE(mainstone_pwm_lookup)); + + ret = platform_device_register(&mainstone_backlight_device); + if (ret) { printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret); + pwm_remove_table(mainstone_pwm_lookup, + ARRAY_SIZE(mainstone_pwm_lookup)); + } } #else #define mainstone_backlight_register() do { } while (0) diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 29997bde277d..3b52b1aa0659 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -26,6 +26,7 @@ #include <linux/input.h> #include <linux/delay.h> #include <linux/gpio_keys.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/rtc.h> #include <linux/leds.h> @@ -181,12 +182,15 @@ static unsigned long mioa701_pin_config[] = { MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH), }; +static struct pwm_lookup mioa701_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 4000 * 1024, + PWM_POLARITY_NORMAL), +}; + /* LCD Screen and Backlight */ static struct platform_pwm_backlight_data mioa701_backlight_data = { - .pwm_id = 0, .max_brightness = 100, .dft_brightness = 50, - .pwm_period_ns = 4000 * 1024, /* Fl = 250kHz */ .enable_gpio = -1, }; @@ -678,6 +682,7 @@ MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info) MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL) MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL) MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL) +MIO_SIMPLE_DEV(wm9713_acodec, "wm9713-codec", NULL); MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data); MIO_SIMPLE_DEV(mioa701_camera, "soc-camera-pdrv",&iclink); @@ -685,6 +690,7 @@ static struct platform_device *devices[] __initdata = { &mioa701_gpio_keys, &mioa701_backlight, &mioa701_led, + &wm9713_acodec, &pxa2xx_pcm, &mioa701_sound, &power_dev, @@ -751,6 +757,7 @@ static void __init mioa701_machine_init(void) pxa_set_udc_info(&mioa701_udc_info); pxa_set_ac97_info(&mioa701_ac97_info); pm_power_off = mioa701_poweroff; + pwm_add_table(mioa701_pwm_lookup, ARRAY_SIZE(mioa701_pwm_lookup)); platform_add_devices(devices, ARRAY_SIZE(devices)); gsm_init(); diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index e54a296fb81f..13eba2b26e0a 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -15,6 +15,7 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/pda_power.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> #include <linux/wm97xx.h> @@ -270,6 +271,11 @@ void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset) * Backlight ******************************************************************************/ #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static struct pwm_lookup palm27x_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 3500 * 1024, + PWM_POLARITY_NORMAL), +}; + static int palm_bl_power; static int palm_lcd_power; @@ -318,10 +324,8 @@ static void palm27x_backlight_exit(struct device *dev) } static struct platform_pwm_backlight_data palm27x_backlight_data = { - .pwm_id = 0, .max_brightness = 0xfe, .dft_brightness = 0x7e, - .pwm_period_ns = 3500 * 1024, .enable_gpio = -1, .init = palm27x_backlight_init, .notify = palm27x_backlight_notify, @@ -340,6 +344,7 @@ void __init palm27x_pwm_init(int bl, int lcd) { palm_bl_power = bl; palm_lcd_power = lcd; + pwm_add_lookup(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup)); platform_device_register(&palm27x_backlight); } #endif diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 7691c974ca4b..aebf6de62468 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -18,6 +18,7 @@ #include <linux/delay.h> #include <linux/irq.h> #include <linux/input.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> #include <linux/input/matrix_keypad.h> @@ -166,11 +167,14 @@ static inline void palmtc_keys_init(void) {} * Backlight ******************************************************************************/ #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static struct pwm_lookup palmtc_pwm_lookup[] = { + PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS, + PWM_PERIOD_NORMAL), +}; + static struct platform_pwm_backlight_data palmtc_backlight_data = { - .pwm_id = 1, .max_brightness = PALMTC_MAX_INTENSITY, .dft_brightness = PALMTC_MAX_INTENSITY, - .pwm_period_ns = PALMTC_PERIOD_NS, .enable_gpio = GPIO_NR_PALMTC_BL_POWER, }; @@ -184,6 +188,7 @@ static struct platform_device palmtc_backlight = { static void __init palmtc_pwm_init(void) { + pwm_add_table(palmtc_pwm_lookup, ARRAY_SIZE(palmtc_pwm_lookup)); platform_device_register(&palmtc_backlight); } #else diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 956fd24ee6fd..e64bb4326e69 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -21,6 +21,7 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/pda_power.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> #include <linux/wm97xx.h> @@ -138,6 +139,11 @@ static struct platform_device palmte2_pxa_keys = { /****************************************************************************** * Backlight ******************************************************************************/ +static struct pwm_lookup palmte2_pwm_lookup[] = { + PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL, + PALMTE2_PERIOD_NS, PWM_POLARITY_NORMAL), +}; + static struct gpio palmte_bl_gpios[] = { { GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" }, { GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" }, @@ -161,10 +167,8 @@ static void palmte2_backlight_exit(struct device *dev) } static struct platform_pwm_backlight_data palmte2_backlight_data = { - .pwm_id = 0, .max_brightness = PALMTE2_MAX_INTENSITY, .dft_brightness = PALMTE2_MAX_INTENSITY, - .pwm_period_ns = PALMTE2_PERIOD_NS, .enable_gpio = -1, .init = palmte2_backlight_init, .notify = palmte2_backlight_notify, @@ -355,6 +359,7 @@ static void __init palmte2_init(void) pxa_set_ac97_info(&palmte2_ac97_pdata); pxa_set_ficp_info(&palmte2_ficp_platform_data); + pwm_add_table(palmte2_pwm_lookup, ARRAY_SIZE(palmte2_pwm_lookup)); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index d8319b54299a..b71c96f614f9 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -24,6 +24,7 @@ #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <media/mt9v022.h> @@ -148,11 +149,14 @@ static struct pxafb_mach_info pcm990_fbinfo __initdata = { }; #endif +static struct pwm_lookup pcm990_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data pcm990_backlight_data = { - .pwm_id = 0, .max_brightness = 1023, .dft_brightness = 1023, - .pwm_period_ns = 78770, .enable_gpio = -1, }; @@ -542,6 +546,7 @@ void __init pcm990_baseboard_init(void) #ifndef CONFIG_PCM990_DISPLAY_NONE pxa_set_fb_info(NULL, &pcm990_fbinfo); #endif + pwm_add_table(pcm990_pwm_lookup, ARRAY_SIZE(pcm990_pwm_lookup)); platform_device_register(&pcm990_backlight_device); /* MMC */ diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 221260d5d109..ffc424028557 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -84,7 +84,7 @@ EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset); */ static unsigned int pwrmode = PWRMODE_SLEEP; -int __init pxa27x_set_pwrmode(unsigned int mode) +int pxa27x_set_pwrmode(unsigned int mode) { switch (mode) { case PWRMODE_SLEEP: diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 06005d3f2ba3..20ce2d386f17 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -42,10 +42,6 @@ #define PECR_IS(n) ((1 << ((n) * 2)) << 29) extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int)); -#ifdef CONFIG_PM - -#define ISRAM_START 0x5c000000 -#define ISRAM_SIZE SZ_256K /* * NAND NFC: DFI bus arbitration subset @@ -54,6 +50,11 @@ extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int)); #define NDCR_ND_ARB_EN (1 << 12) #define NDCR_ND_ARB_CNTL (1 << 19) +#ifdef CONFIG_PM + +#define ISRAM_START 0x5c000000 +#define ISRAM_SIZE SZ_256K + static void __iomem *sram; static unsigned long wakeup_src; diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 88f70c37ad0d..36571a9a44fe 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -29,6 +29,7 @@ #include <linux/leds.h> #include <linux/w1-gpio.h> #include <linux/sched.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> @@ -507,7 +508,7 @@ static struct w1_gpio_platform_data w1_gpio_platform_data = { .ext_pullup_enable_pin = -EINVAL, }; -struct platform_device raumfeld_w1_gpio_device = { +static struct platform_device raumfeld_w1_gpio_device = { .name = "w1-gpio", .dev = { .platform_data = &w1_gpio_platform_data @@ -531,13 +532,15 @@ static void __init raumfeld_w1_init(void) * Framebuffer device */ +static struct pwm_lookup raumfeld_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 10000, + PWM_POLARITY_NORMAL), +}; + /* PWM controlled backlight */ static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = { - .pwm_id = 0, .max_brightness = 100, .dft_brightness = 100, - /* 10000 ns = 10 ms ^= 100 kHz */ - .pwm_period_ns = 10000, .enable_gpio = -1, }; @@ -618,6 +621,8 @@ static void __init raumfeld_lcd_init(void) } else { mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT; pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1); + pwm_add_table(raumfeld_pwm_lookup, + ARRAY_SIZE(raumfeld_pwm_lookup)); platform_device_register(&raumfeld_pwm_backlight_device); } @@ -629,7 +634,7 @@ static void __init raumfeld_lcd_init(void) * SPI devices */ -struct spi_gpio_platform_data raumfeld_spi_platform_data = { +static struct spi_gpio_platform_data raumfeld_spi_platform_data = { .sck = GPIO_SPI_CLK, .mosi = GPIO_SPI_MOSI, .miso = GPIO_SPI_MISO, @@ -848,7 +853,7 @@ static void __init raumfeld_power_init(void) static struct regulator_consumer_supply audio_va_consumer_supply = REGULATOR_SUPPLY("va", "0-0048"); -struct regulator_init_data audio_va_initdata = { +static struct regulator_init_data audio_va_initdata = { .consumer_supplies = &audio_va_consumer_supply, .num_consumer_supplies = 1, .constraints = { @@ -880,7 +885,7 @@ static struct regulator_consumer_supply audio_dummy_supplies[] = { REGULATOR_SUPPLY("vlc", "0-0048"), }; -struct regulator_init_data audio_dummy_initdata = { +static struct regulator_init_data audio_dummy_initdata = { .consumer_supplies = audio_dummy_supplies, .num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies), .constraints = { @@ -928,7 +933,7 @@ static struct regulator_init_data vcc_mmc_init_data = { .num_consumer_supplies = 1, }; -struct max8660_subdev_data max8660_v6_subdev_data = { +static struct max8660_subdev_data max8660_v6_subdev_data = { .id = MAX8660_V6, .name = "vmmc", .platform_data = &vcc_mmc_init_data, diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index a71da84e784b..349a13a76215 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -18,6 +18,7 @@ #include <linux/clk.h> #include <linux/gpio.h> #include <linux/smc91x.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <asm/mach-types.h> @@ -168,21 +169,24 @@ static inline void tavorevb_init_keypad(void) {} #endif /* CONFIG_KEYBOARD_PXA27x || CONFIG_KEYBOARD_PXA27x_MODULE */ #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pwm_lookup tavorevb_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 100000, + PWM_POLARITY_NORMAL), + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.1", NULL, 100000, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data tavorevb_backlight_data[] = { [0] = { /* primary backlight */ - .pwm_id = 2, .max_brightness = 100, .dft_brightness = 100, - .pwm_period_ns = 100000, .enable_gpio = -1, }, [1] = { /* secondary backlight */ - .pwm_id = 0, .max_brightness = 100, .dft_brightness = 100, - .pwm_period_ns = 100000, .enable_gpio = -1, }, }; @@ -470,6 +474,7 @@ static struct pxafb_mach_info tavorevb_lcd_info = { static void __init tavorevb_init_lcd(void) { + pwm_add_table(tavorevb_pwm_lookup, ARRAY_SIZE(tavorevb_pwm_lookup)); platform_device_register(&tavorevb_backlight_devices[0]); platform_device_register(&tavorevb_backlight_devices[1]); pxa_set_fb_info(NULL, &tavorevb_lcd_info); diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 8ab26370107e..7ecc61ad2bed 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -39,6 +39,7 @@ #include <linux/i2c/pxa-i2c.h> #include <linux/serial_8250.h> #include <linux/smc91x.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/usb/isp116x.h> #include <linux/mtd/mtd.h> @@ -350,6 +351,11 @@ static struct pxafb_mach_info fb_info = { .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, }; +static struct pwm_lookup viper_pwm_lookup[] = { + PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000, + PWM_POLARITY_NORMAL), +}; + static int viper_backlight_init(struct device *dev) { int ret; @@ -398,10 +404,8 @@ static void viper_backlight_exit(struct device *dev) } static struct platform_pwm_backlight_data viper_backlight_data = { - .pwm_id = 0, .max_brightness = 100, .dft_brightness = 100, - .pwm_period_ns = 1000000, .enable_gpio = -1, .init = viper_backlight_init, .notify = viper_backlight_notify, @@ -939,6 +943,7 @@ static void __init viper_init(void) smc91x_device.num_resources--; pxa_set_i2c_info(NULL); + pwm_add_table(viper_pwm_lookup, ARRAY_SIZE(viper_pwm_lookup)); platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs)); viper_init_vcore_gpios(); diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index e1a121b36cfa..d9899d73e46b 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/z2_battery.h> #include <linux/dma-mapping.h> @@ -199,21 +200,24 @@ static inline void z2_nor_init(void) {} * Backlight ******************************************************************************/ #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static struct pwm_lookup z2_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight.0", NULL, 1260320, + PWM_POLARITY_NORMAL), + PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.1", NULL, 1260320, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data z2_backlight_data[] = { [0] = { /* Keypad Backlight */ - .pwm_id = 1, .max_brightness = 1023, .dft_brightness = 0, - .pwm_period_ns = 1260320, .enable_gpio = -1, }, [1] = { /* LCD Backlight */ - .pwm_id = 2, .max_brightness = 1023, .dft_brightness = 512, - .pwm_period_ns = 1260320, .enable_gpio = -1, }, }; @@ -236,6 +240,7 @@ static struct platform_device z2_backlight_devices[2] = { }; static void __init z2_pwm_init(void) { + pwm_add_table(z2_pwm_lookup, ARRAY_SIZE(z2_pwm_lookup)); platform_device_register(&z2_backlight_devices[0]); platform_device_register(&z2_backlight_devices[1]); } @@ -595,13 +600,11 @@ static struct spi_board_info spi_board_info[] __initdata = { }; static struct pxa2xx_spi_master pxa_ssp1_master_info = { - .clock_enable = CKEN_SSP, .num_chipselect = 1, .enable_dma = 1, }; static struct pxa2xx_spi_master pxa_ssp2_master_info = { - .clock_enable = CKEN_SSP2, .num_chipselect = 1, }; diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 77daea478e88..e20359a7433c 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/smc91x.h> @@ -120,11 +121,14 @@ static inline void zylonite_init_leds(void) {} #endif #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pwm_lookup zylonite_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.1", 1, "pwm-backlight.0", NULL, 10000, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data zylonite_backlight_data = { - .pwm_id = 3, .max_brightness = 100, .dft_brightness = 100, - .pwm_period_ns = 10000, .enable_gpio = -1, }; @@ -206,6 +210,7 @@ static struct pxafb_mach_info zylonite_sharp_lcd_info = { static void __init zylonite_init_lcd(void) { + pwm_add_table(zylonite_pwm_lookup, ARRAY_SIZE(zylonite_pwm_lookup)); platform_device_register(&zylonite_backlight_device); if (lcd_id & 0x20) { diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c index 5cde63a64b34..9b00123a315d 100644 --- a/arch/arm/mach-qcom/platsmp.c +++ b/arch/arm/mach-qcom/platsmp.c @@ -49,7 +49,7 @@ extern void secondary_startup_arm(void); static DEFINE_SPINLOCK(boot_lock); #ifdef CONFIG_HOTPLUG_CPU -static void __ref qcom_cpu_die(unsigned int cpu) +static void qcom_cpu_die(unsigned int cpu) { wfi(); } diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c index ac22dd41b135..968e2d1964f6 100644 --- a/arch/arm/mach-realview/hotplug.c +++ b/arch/arm/mach-realview/hotplug.c @@ -90,7 +90,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) * * Called with IRQs disabled */ -void __ref realview_cpu_die(unsigned int cpu) +void realview_cpu_die(unsigned int cpu) { int spurious = 0; diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index b6cf3b449428..251c7b9c5f9b 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -67,7 +67,7 @@ static void __init rockchip_timer_init(void) } of_clk_init(NULL); - clocksource_of_init(); + clocksource_probe(); } static void __init rockchip_dt_init(void) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index d13aa3f9bac4..f776adcdaee8 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -813,7 +813,7 @@ static const struct gpio_led_platform_data gpio_leds_pdata = { .num_leds = ARRAY_SIZE(gpio_leds), }; -static struct s3c_hsotg_plat crag6410_hsotg_pdata; +static struct dwc2_hsotg_plat crag6410_hsotg_pdata; static void __init crag6410_machine_init(void) { @@ -839,7 +839,7 @@ static void __init crag6410_machine_init(void) s3c_i2c0_set_platdata(&i2c0_pdata); s3c_i2c1_set_platdata(&i2c1_pdata); s3c_fb_set_platdata(&crag6410_lcd_pdata); - s3c_hsotg_set_platdata(&crag6410_hsotg_pdata); + dwc2_hsotg_set_platdata(&crag6410_hsotg_pdata); i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index 7b8a3699795c..acdfb5fac40f 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -193,7 +193,7 @@ static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = { }, }; -static struct s3c_hsotg_plat smartq_hsotg_pdata; +static struct dwc2_hsotg_plat smartq_hsotg_pdata; static int __init smartq_lcd_setup_gpio(void) { @@ -386,7 +386,7 @@ void __init smartq_map_io(void) void __init smartq_machine_init(void) { s3c_i2c0_set_platdata(NULL); - s3c_hsotg_set_platdata(&smartq_hsotg_pdata); + dwc2_hsotg_set_platdata(&smartq_hsotg_pdata); s3c_hwmon_set_platdata(&smartq_hwmon_pdata); s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata); s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata); diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 2722800d5c11..30fd27853072 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -633,7 +633,7 @@ static struct platform_pwm_backlight_data smdk6410_bl_data = { .enable_gpio = -1, }; -static struct s3c_hsotg_plat smdk6410_hsotg_pdata; +static struct dwc2_hsotg_plat smdk6410_hsotg_pdata; static void __init smdk6410_map_io(void) { @@ -664,7 +664,7 @@ static void __init smdk6410_machine_init(void) s3c_i2c0_set_platdata(NULL); s3c_i2c1_set_platdata(NULL); s3c_fb_set_platdata(&smdk6410_lcd_pdata); - s3c_hsotg_set_platdata(&smdk6410_hsotg_pdata); + dwc2_hsotg_set_platdata(&smdk6410_hsotg_pdata); samsung_keypad_set_platdata(&smdk6410_keypad_data); diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 926e336d6aeb..88734a5e10ca 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -98,76 +98,3 @@ config ARCH_SH73A0 comment "Renesas ARM SoCs System Configuration" endif - -if ARCH_SHMOBILE_LEGACY - -comment "Renesas ARM SoCs System Type" - -config ARCH_R8A7778 - bool "R-Car M1A (R8A77781)" - select ARCH_RCAR_GEN1 - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_GIC - -config ARCH_R8A7779 - bool "R-Car H1 (R8A77790)" - select ARCH_RCAR_GEN1 - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_GIC - -comment "Renesas ARM SoCs Board Type" - -config MACH_BOCKW - bool "BOCK-W platform" - depends on ARCH_R8A7778 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - select SND_SOC_AK4554 if SND_SIMPLE_CARD - select SND_SOC_AK4642 if SND_SIMPLE_CARD && I2C - select USE_OF - -config MACH_BOCKW_REFERENCE - bool "BOCK-W - Reference Device Tree Implementation" - depends on ARCH_R8A7778 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - select USE_OF - ---help--- - Use reference implementation of BockW board support - which makes use of device tree at the expense - of not supporting a number of devices. - - This is intended to aid developers - -comment "Renesas ARM SoCs System Configuration" - -config CPU_HAS_INTEVT - bool - default y - -config SH_CLK_CPG - bool - -source "drivers/sh/Kconfig" - -endif - -if ARCH_SHMOBILE - -menu "Timer and clock configuration" - -config SHMOBILE_TIMER_HZ - int "Kernel HZ (jiffies per second)" - range 32 1024 - default "128" - help - Allows the configuration of the timer frequency. It is customary - to have the timer interrupt run at 1000 Hz or 100 Hz, but in the - case of low timer frequencies other values may be more suitable. - Renesas ARM SoC systems using a 32768 Hz RCLK for clock events may - want to select a HZ value such as 128 that can evenly divide RCLK. - A HZ value that does not divide evenly may cause timer drift. - -endmenu - -endif diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 476de30798d7..a65c80ac9009 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -3,7 +3,7 @@ # # Common objects -obj-y := timer.o console.o +obj-y := timer.o # CPU objects obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o @@ -18,12 +18,6 @@ obj-$(CONFIG_ARCH_R8A7794) += setup-r8a7794.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o -# Clock objects -ifndef CONFIG_COMMON_CLK -obj-y += clock.o -obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o -endif - # CPU reset vector handling objects cpu-y := platsmp.o headsmp.o @@ -49,11 +43,5 @@ obj-$(CONFIG_PM_RCAR) += pm-rcar.o obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o obj-$(CONFIG_ARCH_RCAR_GEN2) += pm-rcar-gen2.o -# Board objects -ifndef CONFIG_ARCH_SHMOBILE_MULTI -obj-$(CONFIG_MACH_BOCKW) += board-bockw.o -obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o -endif - # Framework support obj-$(CONFIG_SMP) += $(smp-y) diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot deleted file mode 100644 index a489fe9a76cd..000000000000 --- a/arch/arm/mach-shmobile/Makefile.boot +++ /dev/null @@ -1,12 +0,0 @@ -# per-board load address for uImage -loadaddr-y := -loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000 -loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000 - -__ZRELADDR := $(sort $(loadaddr-y)) - zreladdr-y += $(__ZRELADDR) - -# Unsupported legacy stuff -# -#params_phys-y (Instead: Pass atags pointer in r2) -#initrd_phys-y (Instead: Use compiled-in initramfs) diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c deleted file mode 100644 index 4f78296f7d04..000000000000 --- a/arch/arm/mach-shmobile/board-bockw-reference.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Bock-W board support - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/of_platform.h> - -#include <asm/mach/arch.h> - -#include "common.h" -#include "r8a7778.h" - -/* - * see board-bock.c for checking detail of dip-switch - */ - -#define FPGA 0x18200000 -#define IRQ0MR 0x30 -#define COMCTLR 0x101c - -#define PFC 0xfffc0000 -#define PUPR4 0x110 -static void __init bockw_init(void) -{ - void __iomem *fpga; - void __iomem *pfc; - -#ifndef CONFIG_COMMON_CLK - r8a7778_clock_init(); -#endif - r8a7778_init_irq_extpin_dt(1); - r8a7778_add_dt_devices(); - - fpga = ioremap_nocache(FPGA, SZ_1M); - if (fpga) { - /* - * CAUTION - * - * IRQ0/1 is cascaded interrupt from FPGA. - * it should be cared in the future - * Now, it is assuming IRQ0 was used only from SMSC. - */ - u16 val = ioread16(fpga + IRQ0MR); - val &= ~(1 << 4); /* enable SMSC911x */ - iowrite16(val, fpga + IRQ0MR); - - iounmap(fpga); - } - - pfc = ioremap_nocache(PFC, 0x200); - if (pfc) { - /* - * FIXME - * - * SDHI CD/WP pin needs pull-up - */ - iowrite32(ioread32(pfc + PUPR4) | (3 << 26), pfc + PUPR4); - iounmap(pfc); - } - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char *const bockw_boards_compat_dt[] __initconst = { - "renesas,bockw-reference", - NULL, -}; - -DT_MACHINE_START(BOCKW_DT, "bockw") - .init_early = shmobile_init_delay, - .init_irq = r8a7778_init_irq_dt, - .init_machine = bockw_init, - .init_late = shmobile_init_late, - .dt_compat = bockw_boards_compat_dt, -MACHINE_END diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c deleted file mode 100644 index 25a0e7233fe4..000000000000 --- a/arch/arm/mach-shmobile/board-bockw.c +++ /dev/null @@ -1,737 +0,0 @@ -/* - * Bock-W board support - * - * Copyright (C) 2013-2014 Renesas Solutions Corp. - * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * Copyright (C) 2013-2014 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/mfd/tmio.h> -#include <linux/mmc/host.h> -#include <linux/mmc/sh_mobile_sdhi.h> -#include <linux/mmc/sh_mmcif.h> -#include <linux/mtd/partitions.h> -#include <linux/pinctrl/machine.h> -#include <linux/platform_data/camera-rcar.h> -#include <linux/platform_data/usb-rcar-phy.h> -#include <linux/platform_device.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/smsc911x.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#include <linux/usb/renesas_usbhs.h> - -#include <media/soc_camera.h> -#include <asm/mach/arch.h> -#include <sound/rcar_snd.h> -#include <sound/simple_card.h> - -#include "common.h" -#include "irqs.h" -#include "r8a7778.h" - -#define FPGA 0x18200000 -#define IRQ0MR 0x30 -#define COMCTLR 0x101c -static void __iomem *fpga; - -/* - * CN9(Upper side) SCIF/RCAN selection - * - * 1,4 3,6 - * SW40 SCIF RCAN - * SW41 SCIF RCAN - */ - -/* - * MMC (CN26) pin - * - * SW6 (D2) 3 pin - * SW7 (D5) ON - * SW8 (D3) 3 pin - * SW10 (D4) 1 pin - * SW12 (CLK) 1 pin - * SW13 (D6) 3 pin - * SW14 (CMD) ON - * SW15 (D6) 1 pin - * SW16 (D0) ON - * SW17 (D1) ON - * SW18 (D7) 3 pin - * SW19 (MMC) 1 pin - */ - -/* - * SSI settings - * - * SW45: 1-4 side (SSI5 out, ROUT/LOUT CN19 Mid) - * SW46: 1101 (SSI6 Recorde) - * SW47: 1110 (SSI5 Playback) - * SW48: 11 (Recorde power) - * SW49: 1 (SSI slave mode) - * SW50: 1111 (SSI7, SSI8) - * SW51: 1111 (SSI3, SSI4) - * SW54: 1pin (ak4554 FPGA control) - * SW55: 1 (CLKB is 24.5760MHz) - * SW60: 1pin (ak4554 FPGA control) - * SW61: 3pin (use X11 clock) - * SW78: 3-6 (ak4642 connects I2C0) - * - * You can use sound as - * - * hw0: CN19: SSI56-AK4643 - * hw1: CN21: SSI3-AK4554(playback) - * hw2: CN21: SSI4-AK4554(capture) - * hw3: CN20: SSI7-AK4554(playback) - * hw4: CN20: SSI8-AK4554(capture) - * - * this command is required when playback on hw0. - * - * # amixer set "LINEOUT Mixer DACL" on - */ - -/* - * USB - * - * USB1 (CN29) can be Host/Function - * - * Host Func - * SW98 1 2 - * SW99 1 3 - */ - -/* Dummy supplies, where voltage doesn't matter */ -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x"), - REGULATOR_SUPPLY("vdd33a", "smsc911x"), -}; - -static struct regulator_consumer_supply fixed3v3_power_consumers[] = { - REGULATOR_SUPPLY("vmmc", "sh_mmcif"), - REGULATOR_SUPPLY("vqmmc", "sh_mmcif"), -}; - -static struct smsc911x_platform_config smsc911x_data __initdata = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_32BIT, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct resource smsc911x_resources[] __initdata = { - DEFINE_RES_MEM(0x18300000, 0x1000), - DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */ -}; - -#if IS_ENABLED(CONFIG_USB_RENESAS_USBHS_UDC) -/* - * When USB1 is Func - */ -static int usbhsf_get_id(struct platform_device *pdev) -{ - return USBHS_GADGET; -} - -#define SUSPMODE 0x102 -static int usbhsf_power_ctrl(struct platform_device *pdev, - void __iomem *base, int enable) -{ - enable = !!enable; - - r8a7778_usb_phy_power(enable); - - iowrite16(enable << 14, base + SUSPMODE); - - return 0; -} - -static struct resource usbhsf_resources[] __initdata = { - DEFINE_RES_MEM(0xffe60000, 0x110), - DEFINE_RES_IRQ(gic_iid(0x4f)), -}; - -static struct renesas_usbhs_platform_info usbhs_info __initdata = { - .platform_callback = { - .get_id = usbhsf_get_id, - .power_ctrl = usbhsf_power_ctrl, - }, - .driver_param = { - .buswait_bwait = 4, - .d0_tx_id = HPBDMA_SLAVE_USBFUNC_TX, - .d1_rx_id = HPBDMA_SLAVE_USBFUNC_RX, - }, -}; - -#define USB_PHY_SETTING {.port1_func = 1, .ovc_pin[1].active_high = 1,} -#define USB1_DEVICE "renesas_usbhs" -#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE() \ - platform_device_register_resndata( \ - NULL, "renesas_usbhs", -1, \ - usbhsf_resources, \ - ARRAY_SIZE(usbhsf_resources), \ - &usbhs_info, sizeof(struct renesas_usbhs_platform_info)) - -#else -/* - * When USB1 is Host - */ -#define USB_PHY_SETTING { } -#define USB1_DEVICE "ehci-platform" -#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE() - -#endif - -/* USB */ -static struct resource usb_phy_resources[] __initdata = { - DEFINE_RES_MEM(0xffe70800, 0x100), - DEFINE_RES_MEM(0xffe76000, 0x100), -}; - -static struct rcar_phy_platform_data usb_phy_platform_data __initdata = - USB_PHY_SETTING; - - -/* SDHI */ -static struct tmio_mmc_data sdhi0_info __initdata = { - .chan_priv_tx = (void *)HPBDMA_SLAVE_SDHI0_TX, - .chan_priv_rx = (void *)HPBDMA_SLAVE_SDHI0_RX, - .capabilities = MMC_CAP_SD_HIGHSPEED, - .ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, - .flags = TMIO_MMC_HAS_IDLE_WAIT, -}; - -static struct resource sdhi0_resources[] __initdata = { - DEFINE_RES_MEM(0xFFE4C000, 0x100), - DEFINE_RES_IRQ(gic_iid(0x77)), -}; - -/* Ether */ -static struct resource ether_resources[] __initdata = { - DEFINE_RES_MEM(0xfde00000, 0x400), - DEFINE_RES_IRQ(gic_iid(0x89)), -}; - -static struct sh_eth_plat_data ether_platform_data __initdata = { - .phy = 0x01, - .edmac_endian = EDMAC_LITTLE_ENDIAN, - .phy_interface = PHY_INTERFACE_MODE_RMII, - /* - * Although the LINK signal is available on the board, it's connected to - * the link/activity LED output of the PHY, thus the link disappears and - * reappears after each packet. We'd be better off ignoring such signal - * and getting the link state from the PHY indirectly. - */ - .no_ether_link = 1, -}; - -static struct platform_device_info ether_info __initdata = { - .name = "r8a777x-ether", - .id = -1, - .res = ether_resources, - .num_res = ARRAY_SIZE(ether_resources), - .data = ðer_platform_data, - .size_data = sizeof(ether_platform_data), - .dma_mask = DMA_BIT_MASK(32), -}; - -/* I2C */ -static struct i2c_board_info i2c0_devices[] = { - { - I2C_BOARD_INFO("rx8581", 0x51), - }, { - I2C_BOARD_INFO("ak4643", 0x12), - } -}; - -/* HSPI*/ -static struct mtd_partition m25p80_spi_flash_partitions[] = { - { - .name = "data(spi)", - .size = 0x0100000, - .offset = 0, - }, -}; - -static struct flash_platform_data spi_flash_data = { - .name = "m25p80", - .type = "s25fl008k", - .parts = m25p80_spi_flash_partitions, - .nr_parts = ARRAY_SIZE(m25p80_spi_flash_partitions), -}; - -static struct spi_board_info spi_board_info[] __initdata = { - { - .modalias = "m25p80", - .max_speed_hz = 104000000, - .chip_select = 0, - .bus_num = 0, - .mode = SPI_MODE_0, - .platform_data = &spi_flash_data, - }, -}; - -/* MMC */ -static struct resource mmc_resources[] __initdata = { - DEFINE_RES_MEM(0xffe4e000, 0x100), - DEFINE_RES_IRQ(gic_iid(0x5d)), -}; - -static struct sh_mmcif_plat_data sh_mmcif_plat __initdata = { - .sup_pclk = 0, - .caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_8_BIT_DATA | - MMC_CAP_NEEDS_POLL, -}; - -/* In the default configuration both decoders reside on I2C bus 0 */ -#define BOCKW_CAMERA(idx) \ -static struct i2c_board_info camera##idx##_info = { \ - I2C_BOARD_INFO("ml86v7667", 0x41 + 2 * (idx)), \ -}; \ - \ -static struct soc_camera_link iclink##idx##_ml86v7667 __initdata = { \ - .bus_id = idx, \ - .i2c_adapter_id = 0, \ - .board_info = &camera##idx##_info, \ -} - -BOCKW_CAMERA(0); -BOCKW_CAMERA(1); - -/* VIN */ -static struct rcar_vin_platform_data vin_platform_data __initdata = { - .flags = RCAR_VIN_BT656, -}; - -#define R8A7778_VIN(idx) \ -static struct resource vin##idx##_resources[] __initdata = { \ - DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000), \ - DEFINE_RES_IRQ(gic_iid(0x5a)), \ -}; \ - \ -static struct platform_device_info vin##idx##_info __initdata = { \ - .name = "r8a7778-vin", \ - .id = idx, \ - .res = vin##idx##_resources, \ - .num_res = ARRAY_SIZE(vin##idx##_resources), \ - .dma_mask = DMA_BIT_MASK(32), \ - .data = &vin_platform_data, \ - .size_data = sizeof(vin_platform_data), \ -} -R8A7778_VIN(0); -R8A7778_VIN(1); - -/* Sound */ -static struct resource rsnd_resources[] __initdata = { - [RSND_GEN1_SRU] = DEFINE_RES_MEM(0xffd90000, 0x1000), - [RSND_GEN1_SSI] = DEFINE_RES_MEM(0xffd91000, 0x1240), - [RSND_GEN1_ADG] = DEFINE_RES_MEM(0xfffe0000, 0x24), -}; - -static struct rsnd_ssi_platform_info rsnd_ssi[] = { - RSND_SSI_UNUSED, /* SSI 0 */ - RSND_SSI_UNUSED, /* SSI 1 */ - RSND_SSI_UNUSED, /* SSI 2 */ - RSND_SSI(HPBDMA_SLAVE_HPBIF3_TX, gic_iid(0x85), 0), - RSND_SSI(HPBDMA_SLAVE_HPBIF4_RX, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE), - RSND_SSI(HPBDMA_SLAVE_HPBIF5_TX, gic_iid(0x86), 0), - RSND_SSI(HPBDMA_SLAVE_HPBIF6_RX, gic_iid(0x86), 0), - RSND_SSI(HPBDMA_SLAVE_HPBIF7_TX, gic_iid(0x86), 0), - RSND_SSI(HPBDMA_SLAVE_HPBIF8_RX, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE), -}; - -static struct rsnd_src_platform_info rsnd_src[9] = { - RSND_SRC_UNUSED, /* SRU 0 */ - RSND_SRC_UNUSED, /* SRU 1 */ - RSND_SRC_UNUSED, /* SRU 2 */ - RSND_SRC(0, 0), - RSND_SRC(0, 0), - RSND_SRC(0, 0), - RSND_SRC(0, 0), - RSND_SRC(0, 0), - RSND_SRC(0, 0), -}; - -static struct rsnd_dai_platform_info rsnd_dai[] = { - { - .playback = { .ssi = &rsnd_ssi[5], .src = &rsnd_src[5] }, - .capture = { .ssi = &rsnd_ssi[6], .src = &rsnd_src[6] }, - }, { - .playback = { .ssi = &rsnd_ssi[3], .src = &rsnd_src[3] }, - }, { - .capture = { .ssi = &rsnd_ssi[4], .src = &rsnd_src[4] }, - }, { - .playback = { .ssi = &rsnd_ssi[7], .src = &rsnd_src[7] }, - }, { - .capture = { .ssi = &rsnd_ssi[8], .src = &rsnd_src[8] }, - }, -}; - -enum { - AK4554_34 = 0, - AK4643_56, - AK4554_78, - SOUND_MAX, -}; - -static int rsnd_codec_power(int id, int enable) -{ - static int sound_user[SOUND_MAX] = {0, 0, 0}; - int *usr = NULL; - u32 bit; - - switch (id) { - case 3: - case 4: - usr = sound_user + AK4554_34; - bit = (1 << 10); - break; - case 5: - case 6: - usr = sound_user + AK4643_56; - bit = (1 << 6); - break; - case 7: - case 8: - usr = sound_user + AK4554_78; - bit = (1 << 7); - break; - } - - if (!usr) - return -EIO; - - if (enable) { - if (*usr == 0) { - u32 val = ioread16(fpga + COMCTLR); - val &= ~bit; - iowrite16(val, fpga + COMCTLR); - } - - (*usr)++; - } else { - if (*usr == 0) - return 0; - - (*usr)--; - - if (*usr == 0) { - u32 val = ioread16(fpga + COMCTLR); - val |= bit; - iowrite16(val, fpga + COMCTLR); - } - } - - return 0; -} - -static int rsnd_start(int id) -{ - return rsnd_codec_power(id, 1); -} - -static int rsnd_stop(int id) -{ - return rsnd_codec_power(id, 0); -} - -static struct rcar_snd_info rsnd_info = { - .flags = RSND_GEN1, - .ssi_info = rsnd_ssi, - .ssi_info_nr = ARRAY_SIZE(rsnd_ssi), - .src_info = rsnd_src, - .src_info_nr = ARRAY_SIZE(rsnd_src), - .dai_info = rsnd_dai, - .dai_info_nr = ARRAY_SIZE(rsnd_dai), - .start = rsnd_start, - .stop = rsnd_stop, -}; - -static struct asoc_simple_card_info rsnd_card_info[] = { - /* SSI5, SSI6 */ - { - .name = "AK4643", - .card = "SSI56-AK4643", - .codec = "ak4642-codec.0-0012", - .platform = "rcar_sound", - .daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM, - .cpu_dai = { - .name = "rsnd-dai.0", - }, - .codec_dai = { - .name = "ak4642-hifi", - .sysclk = 11289600, - }, - }, - /* SSI3 */ - { - .name = "AK4554", - .card = "SSI3-AK4554(playback)", - .codec = "ak4554-adc-dac.0", - .platform = "rcar_sound", - .daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J, - .cpu_dai = { - .name = "rsnd-dai.1", - }, - .codec_dai = { - .name = "ak4554-hifi", - }, - }, - /* SSI4 */ - { - .name = "AK4554", - .card = "SSI4-AK4554(capture)", - .codec = "ak4554-adc-dac.0", - .platform = "rcar_sound", - .daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J, - .cpu_dai = { - .name = "rsnd-dai.2", - }, - .codec_dai = { - .name = "ak4554-hifi", - }, - }, - /* SSI7 */ - { - .name = "AK4554", - .card = "SSI7-AK4554(playback)", - .codec = "ak4554-adc-dac.1", - .platform = "rcar_sound", - .daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J, - .cpu_dai = { - .name = "rsnd-dai.3", - }, - .codec_dai = { - .name = "ak4554-hifi", - }, - }, - /* SSI8 */ - { - .name = "AK4554", - .card = "SSI8-AK4554(capture)", - .codec = "ak4554-adc-dac.1", - .platform = "rcar_sound", - .daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J, - .cpu_dai = { - .name = "rsnd-dai.4", - }, - .codec_dai = { - .name = "ak4554-hifi", - }, - } -}; - -static const struct pinctrl_map bockw_pinctrl_map[] = { - /* AUDIO */ - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "audio_clk_a", "audio_clk"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "audio_clk_b", "audio_clk"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi34_ctrl", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi3_data", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi4_data", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi5_ctrl", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi5_data", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi6_ctrl", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi6_data", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi78_ctrl", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi7_data", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi8_data", "ssi"), - /* Ether */ - PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778", - "ether_rmii", "ether"), - /* HSPI0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7778", - "hspi0_a", "hspi0"), - /* MMC */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778", - "mmc_data8", "mmc"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778", - "mmc_ctrl", "mmc"), - /* SCIF0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", - "scif0_data_a", "scif0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", - "scif0_ctrl", "scif0"), - /* USB */ - PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778", - "usb0", "usb0"), - PIN_MAP_MUX_GROUP_DEFAULT(USB1_DEVICE, "pfc-r8a7778", - "usb1", "usb1"), - /* SDHI0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", - "sdhi0_data4", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", - "sdhi0_ctrl", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", - "sdhi0_cd", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", - "sdhi0_wp", "sdhi0"), - /* VIN0 */ - PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778", - "vin0_clk", "vin0"), - PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778", - "vin0_data8", "vin0"), - /* VIN1 */ - PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778", - "vin1_clk", "vin1"), - PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778", - "vin1_data8", "vin1"), -}; - -#define PFC 0xfffc0000 -#define PUPR4 0x110 -static void __init bockw_init(void) -{ - void __iomem *base; - struct clk *clk; - struct platform_device *pdev; - int i; - - r8a7778_clock_init(); - r8a7778_init_irq_extpin(1); - r8a7778_add_standard_devices(); - - platform_device_register_full(ðer_info); - - platform_device_register_full(&vin0_info); - /* VIN1 has a pin conflict with Ether */ - if (!IS_ENABLED(CONFIG_SH_ETH)) - platform_device_register_full(&vin1_info); - platform_device_register_data(NULL, "soc-camera-pdrv", 0, - &iclink0_ml86v7667, - sizeof(iclink0_ml86v7667)); - platform_device_register_data(NULL, "soc-camera-pdrv", 1, - &iclink1_ml86v7667, - sizeof(iclink1_ml86v7667)); - - i2c_register_board_info(0, i2c0_devices, - ARRAY_SIZE(i2c0_devices)); - spi_register_board_info(spi_board_info, - ARRAY_SIZE(spi_board_info)); - pinctrl_register_mappings(bockw_pinctrl_map, - ARRAY_SIZE(bockw_pinctrl_map)); - r8a7778_pinmux_init(); - - platform_device_register_resndata( - NULL, "sh_mmcif", -1, - mmc_resources, ARRAY_SIZE(mmc_resources), - &sh_mmcif_plat, sizeof(struct sh_mmcif_plat_data)); - - platform_device_register_resndata( - NULL, "rcar_usb_phy", -1, - usb_phy_resources, - ARRAY_SIZE(usb_phy_resources), - &usb_phy_platform_data, - sizeof(struct rcar_phy_platform_data)); - - regulator_register_fixed(0, dummy_supplies, - ARRAY_SIZE(dummy_supplies)); - regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers, - ARRAY_SIZE(fixed3v3_power_consumers), 3300000); - - /* for SMSC */ - fpga = ioremap_nocache(FPGA, SZ_1M); - if (fpga) { - /* - * CAUTION - * - * IRQ0/1 is cascaded interrupt from FPGA. - * it should be cared in the future - * Now, it is assuming IRQ0 was used only from SMSC. - */ - u16 val = ioread16(fpga + IRQ0MR); - val &= ~(1 << 4); /* enable SMSC911x */ - iowrite16(val, fpga + IRQ0MR); - - platform_device_register_resndata( - NULL, "smsc911x", -1, - smsc911x_resources, ARRAY_SIZE(smsc911x_resources), - &smsc911x_data, sizeof(smsc911x_data)); - } - - /* for SDHI */ - base = ioremap_nocache(PFC, 0x200); - if (base) { - /* - * FIXME - * - * SDHI CD/WP pin needs pull-up - */ - iowrite32(ioread32(base + PUPR4) | (3 << 26), base + PUPR4); - iounmap(base); - - platform_device_register_resndata( - NULL, "sh_mobile_sdhi", 0, - sdhi0_resources, ARRAY_SIZE(sdhi0_resources), - &sdhi0_info, sizeof(struct tmio_mmc_data)); - } - - /* for Audio */ - rsnd_codec_power(5, 1); /* enable ak4642 */ - - platform_device_register_simple( - "ak4554-adc-dac", 0, NULL, 0); - - platform_device_register_simple( - "ak4554-adc-dac", 1, NULL, 0); - - pdev = platform_device_register_resndata( - NULL, "rcar_sound", -1, - rsnd_resources, ARRAY_SIZE(rsnd_resources), - &rsnd_info, sizeof(rsnd_info)); - - clk = clk_get(&pdev->dev, "clk_b"); - clk_set_rate(clk, 24576000); - clk_put(clk); - - for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) { - struct platform_device_info cardinfo = { - .name = "asoc-simple-card", - .id = i, - .data = &rsnd_card_info[i], - .size_data = sizeof(struct asoc_simple_card_info), - .dma_mask = DMA_BIT_MASK(32), - }; - - platform_device_register_full(&cardinfo); - } -} - -static void __init bockw_init_late(void) -{ - r8a7778_init_late(); - ADD_USB_FUNC_DEVICE_IF_POSSIBLE(); -} - -static const char *const bockw_boards_compat_dt[] __initconst = { - "renesas,bockw", - NULL, -}; - -DT_MACHINE_START(BOCKW_DT, "bockw") - .init_early = shmobile_init_delay, - .init_irq = r8a7778_init_irq_dt, - .init_machine = bockw_init, - .dt_compat = bockw_boards_compat_dt, - .init_late = bockw_init_late, -MACHINE_END diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c deleted file mode 100644 index e8510c35558c..000000000000 --- a/arch/arm/mach-shmobile/clock-r8a7778.c +++ /dev/null @@ -1,342 +0,0 @@ -/* - * r8a7778 clock framework support - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * based on r8a7779 - * - * Copyright (C) 2011 Renesas Solutions Corp. - * Copyright (C) 2011 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * MD MD MD MD PLLA PLLB EXTAL clki clkz - * 19 18 12 11 (HMz) (MHz) (MHz) - *---------------------------------------------------------------------------- - * 1 0 0 0 x21 x21 38.00 800 800 - * 1 0 0 1 x24 x24 33.33 800 800 - * 1 0 1 0 x28 x28 28.50 800 800 - * 1 0 1 1 x32 x32 25.00 800 800 - * 1 1 0 1 x24 x21 33.33 800 700 - * 1 1 1 0 x28 x21 28.50 800 600 - * 1 1 1 1 x32 x24 25.00 800 600 - */ - -#include <linux/io.h> -#include <linux/sh_clk.h> -#include <linux/clkdev.h> -#include "clock.h" -#include "common.h" - -#define MSTPCR0 IOMEM(0xffc80030) -#define MSTPCR1 IOMEM(0xffc80034) -#define MSTPCR3 IOMEM(0xffc8003c) -#define MSTPSR1 IOMEM(0xffc80044) -#define MSTPSR4 IOMEM(0xffc80048) -#define MSTPSR6 IOMEM(0xffc8004c) -#define MSTPCR4 IOMEM(0xffc80050) -#define MSTPCR5 IOMEM(0xffc80054) -#define MSTPCR6 IOMEM(0xffc80058) -#define MODEMR 0xFFCC0020 - -#define MD(nr) BIT(nr) - -/* ioremap() through clock mapping mandatory to avoid - * collision with ARM coherent DMA virtual memory range. - */ - -static struct clk_mapping cpg_mapping = { - .phys = 0xffc80000, - .len = 0x80, -}; - -static struct clk extal_clk = { - /* .rate will be updated on r8a7778_clock_init() */ - .mapping = &cpg_mapping, -}; - -static struct clk audio_clk_a = { -}; - -static struct clk audio_clk_b = { -}; - -static struct clk audio_clk_c = { -}; - -/* - * clock ratio of these clock will be updated - * on r8a7778_clock_init() - */ -SH_FIXED_RATIO_CLK_SET(plla_clk, extal_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(pllb_clk, extal_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(i_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(s_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(s1_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(s3_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(s4_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(b_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(out_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(p_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(g_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(z_clk, pllb_clk, 1, 1); - -static struct clk *main_clks[] = { - &extal_clk, - &plla_clk, - &pllb_clk, - &i_clk, - &s_clk, - &s1_clk, - &s3_clk, - &s4_clk, - &b_clk, - &out_clk, - &p_clk, - &g_clk, - &z_clk, - &audio_clk_a, - &audio_clk_b, - &audio_clk_c, -}; - -enum { - MSTP531, MSTP530, - MSTP529, MSTP528, MSTP527, MSTP526, MSTP525, MSTP524, MSTP523, - MSTP331, - MSTP323, MSTP322, MSTP321, - MSTP311, MSTP310, - MSTP309, MSTP308, MSTP307, - MSTP114, - MSTP110, MSTP109, - MSTP100, - MSTP030, - MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, - MSTP016, MSTP015, MSTP012, MSTP011, MSTP010, - MSTP009, MSTP008, MSTP007, - MSTP_NR }; - -static struct clk mstp_clks[MSTP_NR] = { - [MSTP531] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 31, 0), /* SCU0 */ - [MSTP530] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 30, 0), /* SCU1 */ - [MSTP529] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 29, 0), /* SCU2 */ - [MSTP528] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 28, 0), /* SCU3 */ - [MSTP527] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 27, 0), /* SCU4 */ - [MSTP526] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 26, 0), /* SCU5 */ - [MSTP525] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 25, 0), /* SCU6 */ - [MSTP524] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 24, 0), /* SCU7 */ - [MSTP523] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 23, 0), /* SCU8 */ - [MSTP331] = SH_CLK_MSTP32(&s4_clk, MSTPCR3, 31, 0), /* MMC */ - [MSTP323] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 23, 0), /* SDHI0 */ - [MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */ - [MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */ - [MSTP311] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 11, 0), /* SSI4 */ - [MSTP310] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 10, 0), /* SSI5 */ - [MSTP309] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 9, 0), /* SSI6 */ - [MSTP308] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 8, 0), /* SSI7 */ - [MSTP307] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 7, 0), /* SSI8 */ - [MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */ - [MSTP110] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 10, 0), /* VIN0 */ - [MSTP109] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 9, 0), /* VIN1 */ - [MSTP100] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 0, 0), /* USB0/1 */ - [MSTP030] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 30, 0), /* I2C0 */ - [MSTP029] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 29, 0), /* I2C1 */ - [MSTP028] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 28, 0), /* I2C2 */ - [MSTP027] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 27, 0), /* I2C3 */ - [MSTP026] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 26, 0), /* SCIF0 */ - [MSTP025] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 25, 0), /* SCIF1 */ - [MSTP024] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 24, 0), /* SCIF2 */ - [MSTP023] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 23, 0), /* SCIF3 */ - [MSTP022] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 22, 0), /* SCIF4 */ - [MSTP021] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 21, 0), /* SCIF5 */ - [MSTP016] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 16, 0), /* TMU0 */ - [MSTP015] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 15, 0), /* TMU1 */ - [MSTP012] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 12, 0), /* SSI0 */ - [MSTP011] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 11, 0), /* SSI1 */ - [MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */ - [MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 9, 0), /* SSI3 */ - [MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 8, 0), /* SRU */ - [MSTP007] = SH_CLK_MSTP32(&s_clk, MSTPCR0, 7, 0), /* HSPI */ -}; - -static struct clk_lookup lookups[] = { - /* main */ - CLKDEV_CON_ID("shyway_clk", &s_clk), - CLKDEV_CON_ID("peripheral_clk", &p_clk), - - /* MSTP32 clocks */ - CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP331]), /* MMC */ - CLKDEV_DEV_ID("ffe4e000.mmc", &mstp_clks[MSTP331]), /* MMC */ - CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */ - CLKDEV_DEV_ID("ffe4c000.sd", &mstp_clks[MSTP323]), /* SDHI0 */ - CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */ - CLKDEV_DEV_ID("ffe4d000.sd", &mstp_clks[MSTP322]), /* SDHI1 */ - CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */ - CLKDEV_DEV_ID("ffe4f000.sd", &mstp_clks[MSTP321]), /* SDHI2 */ - CLKDEV_DEV_ID("r8a777x-ether", &mstp_clks[MSTP114]), /* Ether */ - CLKDEV_DEV_ID("r8a7778-vin.0", &mstp_clks[MSTP110]), /* VIN0 */ - CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */ - CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */ - CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */ - CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP100]), /* USB FUNC */ - CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */ - CLKDEV_DEV_ID("ffc70000.i2c", &mstp_clks[MSTP030]), /* I2C0 */ - CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */ - CLKDEV_DEV_ID("ffc71000.i2c", &mstp_clks[MSTP029]), /* I2C1 */ - CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */ - CLKDEV_DEV_ID("ffc72000.i2c", &mstp_clks[MSTP028]), /* I2C2 */ - CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */ - CLKDEV_DEV_ID("ffc73000.i2c", &mstp_clks[MSTP027]), /* I2C3 */ - CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */ - CLKDEV_DEV_ID("ffe40000.serial", &mstp_clks[MSTP026]), /* SCIF0 */ - CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */ - CLKDEV_DEV_ID("ffe41000.serial", &mstp_clks[MSTP025]), /* SCIF1 */ - CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */ - CLKDEV_DEV_ID("ffe42000.serial", &mstp_clks[MSTP024]), /* SCIF2 */ - CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */ - CLKDEV_DEV_ID("ffe43000.serial", &mstp_clks[MSTP023]), /* SCIF3 */ - CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */ - CLKDEV_DEV_ID("ffe44000.serial", &mstp_clks[MSTP022]), /* SCIF4 */ - CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */ - CLKDEV_DEV_ID("ffe45000.serial", &mstp_clks[MSTP021]), /* SCIF5 */ - CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */ - CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */ - CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */ - CLKDEV_DEV_ID("fffc8000.spi", &mstp_clks[MSTP007]), /* HSPI1 */ - CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */ - CLKDEV_DEV_ID("fffc6000.spi", &mstp_clks[MSTP007]), /* HSPI2 */ - CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */ - - CLKDEV_ICK_ID("clk_a", "rcar_sound", &audio_clk_a), - CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b), - CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c), - CLKDEV_ICK_ID("clk_i", "rcar_sound", &s1_clk), - CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]), - CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP011]), - CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP010]), - CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP009]), - CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP311]), - CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP310]), - CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]), - CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]), - CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]), - CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP531]), - CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP530]), - CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP529]), - CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP528]), - CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP527]), - CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP526]), - CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP525]), - CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP524]), - CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP523]), - CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]), - CLKDEV_ICK_ID("fck", "ffd80000.timer", &mstp_clks[MSTP016]), - CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP015]), - CLKDEV_ICK_ID("fck", "ffd81000.timer", &mstp_clks[MSTP015]), -}; - -void __init r8a7778_clock_init(void) -{ - void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE); - u32 mode; - int k, ret = 0; - - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); - - switch (mode & (MD(19) | MD(18) | MD(12) | MD(11))) { - case MD(19): - extal_clk.rate = 38000000; - SH_CLK_SET_RATIO(&plla_clk_ratio, 21, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1); - break; - case MD(19) | MD(11): - extal_clk.rate = 33333333; - SH_CLK_SET_RATIO(&plla_clk_ratio, 24, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 24, 1); - break; - case MD(19) | MD(12): - extal_clk.rate = 28500000; - SH_CLK_SET_RATIO(&plla_clk_ratio, 28, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 28, 1); - break; - case MD(19) | MD(12) | MD(11): - extal_clk.rate = 25000000; - SH_CLK_SET_RATIO(&plla_clk_ratio, 32, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 32, 1); - break; - case MD(19) | MD(18) | MD(11): - extal_clk.rate = 33333333; - SH_CLK_SET_RATIO(&plla_clk_ratio, 24, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1); - break; - case MD(19) | MD(18) | MD(12): - extal_clk.rate = 28500000; - SH_CLK_SET_RATIO(&plla_clk_ratio, 28, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1); - break; - case MD(19) | MD(18) | MD(12) | MD(11): - extal_clk.rate = 25000000; - SH_CLK_SET_RATIO(&plla_clk_ratio, 32, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 24, 1); - break; - default: - BUG(); - } - - if (mode & MD(1)) { - SH_CLK_SET_RATIO(&i_clk_ratio, 1, 1); - SH_CLK_SET_RATIO(&s_clk_ratio, 1, 3); - SH_CLK_SET_RATIO(&s1_clk_ratio, 1, 6); - SH_CLK_SET_RATIO(&s3_clk_ratio, 1, 4); - SH_CLK_SET_RATIO(&s4_clk_ratio, 1, 8); - SH_CLK_SET_RATIO(&p_clk_ratio, 1, 12); - SH_CLK_SET_RATIO(&g_clk_ratio, 1, 12); - if (mode & MD(2)) { - SH_CLK_SET_RATIO(&b_clk_ratio, 1, 18); - SH_CLK_SET_RATIO(&out_clk_ratio, 1, 18); - } else { - SH_CLK_SET_RATIO(&b_clk_ratio, 1, 12); - SH_CLK_SET_RATIO(&out_clk_ratio, 1, 12); - } - } else { - SH_CLK_SET_RATIO(&i_clk_ratio, 1, 1); - SH_CLK_SET_RATIO(&s_clk_ratio, 1, 4); - SH_CLK_SET_RATIO(&s1_clk_ratio, 1, 8); - SH_CLK_SET_RATIO(&s3_clk_ratio, 1, 4); - SH_CLK_SET_RATIO(&s4_clk_ratio, 1, 8); - SH_CLK_SET_RATIO(&p_clk_ratio, 1, 16); - SH_CLK_SET_RATIO(&g_clk_ratio, 1, 12); - if (mode & MD(2)) { - SH_CLK_SET_RATIO(&b_clk_ratio, 1, 16); - SH_CLK_SET_RATIO(&out_clk_ratio, 1, 16); - } else { - SH_CLK_SET_RATIO(&b_clk_ratio, 1, 12); - SH_CLK_SET_RATIO(&out_clk_ratio, 1, 12); - } - } - - for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) - ret = clk_register(main_clks[k]); - - if (!ret) - ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - if (!ret) - shmobile_clk_init(); - else - panic("failed to setup r8a7778 clocks\n"); -} diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c deleted file mode 100644 index 68c2d06d0eaa..000000000000 --- a/arch/arm/mach-shmobile/clock.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * SH-Mobile Clock Framework - * - * Copyright (C) 2010 Magnus Damm - * - * Used together with arch/arm/common/clkdev.c and drivers/sh/clk.c. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/export.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/sh_clk.h> - -#include "clock.h" -#include "common.h" - -unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk) -{ - struct clk_ratio *p = clk->priv; - - return clk->parent->rate / p->div * p->mul; -}; - -struct sh_clk_ops shmobile_fixed_ratio_clk_ops = { - .recalc = shmobile_fixed_ratio_clk_recalc, -}; - -int __init shmobile_clk_init(void) -{ - /* Kick the child clocks.. */ - recalculate_root_clocks(); - - /* Enable the necessary init clocks */ - clk_enable_init_clocks(); - - return 0; -} diff --git a/arch/arm/mach-shmobile/clock.h b/arch/arm/mach-shmobile/clock.h deleted file mode 100644 index cf3552ea1019..000000000000 --- a/arch/arm/mach-shmobile/clock.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef CLOCK_H -#define CLOCK_H - -/* legacy clock implementation */ - -struct clk; -unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk); -extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops; - -/* clock ratio */ -struct clk_ratio { - int mul; - int div; -}; - -#define SH_CLK_RATIO(name, m, d) \ -static struct clk_ratio name ##_ratio = { \ - .mul = m, \ - .div = d, \ -} - -#define SH_FIXED_RATIO_CLKg(name, p, r) \ -struct clk name = { \ - .parent = &p, \ - .ops = &shmobile_fixed_ratio_clk_ops,\ - .priv = &r ## _ratio, \ -} - -#define SH_FIXED_RATIO_CLK(name, p, r) \ -static SH_FIXED_RATIO_CLKg(name, p, r) - -#define SH_FIXED_RATIO_CLK_SET(name, p, m, d) \ - SH_CLK_RATIO(name, m, d); \ - SH_FIXED_RATIO_CLK(name, p, name) - -#define SH_CLK_SET_RATIO(p, m, d) \ -do { \ - (p)->mul = m; \ - (p)->div = d; \ -} while (0) - -#endif diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h index 8d27ec546a35..9cb11215ceba 100644 --- a/arch/arm/mach-shmobile/common.h +++ b/arch/arm/mach-shmobile/common.h @@ -1,10 +1,7 @@ #ifndef __ARCH_MACH_COMMON_H #define __ARCH_MACH_COMMON_H -extern void shmobile_earlytimer_init(void); extern void shmobile_init_delay(void); -struct twd_local_timer; -extern void shmobile_setup_console(void); extern void shmobile_boot_vector(void); extern unsigned long shmobile_boot_fn; extern unsigned long shmobile_boot_arg; @@ -18,8 +15,6 @@ extern void shmobile_boot_scu(void); extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus); extern void shmobile_smp_scu_cpu_die(unsigned int cpu); extern int shmobile_smp_scu_cpu_kill(unsigned int cpu); -struct clk; -extern int shmobile_clk_init(void); extern struct platform_suspend_ops shmobile_suspend_ops; #ifdef CONFIG_SUSPEND diff --git a/arch/arm/mach-shmobile/console.c b/arch/arm/mach-shmobile/console.c deleted file mode 100644 index e329ccbd0a67..000000000000 --- a/arch/arm/mach-shmobile/console.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * SH-Mobile Console - * - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <asm/mach/map.h> -#include "common.h" - -void __init shmobile_setup_console(void) -{ - parse_early_param(); - - /* Let earlyprintk output early console messages */ - early_platform_driver_probe("earlyprintk", 1, 1); -} diff --git a/arch/arm/mach-shmobile/intc.h b/arch/arm/mach-shmobile/intc.h deleted file mode 100644 index 40b2ad4ca5b4..000000000000 --- a/arch/arm/mach-shmobile/intc.h +++ /dev/null @@ -1,295 +0,0 @@ -#ifndef __ASM_MACH_INTC_H -#define __ASM_MACH_INTC_H -#include <linux/sh_intc.h> - -#define INTC_IRQ_PINS_ENUM_16L(p) \ - p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \ - p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7, \ - p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \ - p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 - -#define INTC_IRQ_PINS_ENUM_16H(p) \ - p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \ - p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23, \ - p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \ - p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 - -#define INTC_IRQ_PINS_VECT_16L(p, vect) \ - vect(p ## _IRQ0, 0x0200), vect(p ## _IRQ1, 0x0220), \ - vect(p ## _IRQ2, 0x0240), vect(p ## _IRQ3, 0x0260), \ - vect(p ## _IRQ4, 0x0280), vect(p ## _IRQ5, 0x02a0), \ - vect(p ## _IRQ6, 0x02c0), vect(p ## _IRQ7, 0x02e0), \ - vect(p ## _IRQ8, 0x0300), vect(p ## _IRQ9, 0x0320), \ - vect(p ## _IRQ10, 0x0340), vect(p ## _IRQ11, 0x0360), \ - vect(p ## _IRQ12, 0x0380), vect(p ## _IRQ13, 0x03a0), \ - vect(p ## _IRQ14, 0x03c0), vect(p ## _IRQ15, 0x03e0) - -#define INTC_IRQ_PINS_VECT_16H(p, vect) \ - vect(p ## _IRQ16, 0x3200), vect(p ## _IRQ17, 0x3220), \ - vect(p ## _IRQ18, 0x3240), vect(p ## _IRQ19, 0x3260), \ - vect(p ## _IRQ20, 0x3280), vect(p ## _IRQ21, 0x32a0), \ - vect(p ## _IRQ22, 0x32c0), vect(p ## _IRQ23, 0x32e0), \ - vect(p ## _IRQ24, 0x3300), vect(p ## _IRQ25, 0x3320), \ - vect(p ## _IRQ26, 0x3340), vect(p ## _IRQ27, 0x3360), \ - vect(p ## _IRQ28, 0x3380), vect(p ## _IRQ29, 0x33a0), \ - vect(p ## _IRQ30, 0x33c0), vect(p ## _IRQ31, 0x33e0) - -#define INTC_IRQ_PINS_MASK_16L(p, base) \ - { base + 0x40, base + 0x60, 8, /* INTMSK00A / INTMSKCLR00A */ \ - { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \ - p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \ - { base + 0x44, base + 0x64, 8, /* INTMSK10A / INTMSKCLR10A */ \ - { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \ - p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } } - -#define INTC_IRQ_PINS_MASK_16H(p, base) \ - { base + 0x48, base + 0x68, 8, /* INTMSK20A / INTMSKCLR20A */ \ - { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \ - p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \ - { base + 0x4c, base + 0x6c, 8, /* INTMSK30A / INTMSKCLR30A */ \ - { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \ - p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } } - -#define INTC_IRQ_PINS_PRIO_16L(p, base) \ - { base + 0x10, 0, 32, 4, /* INTPRI00A */ \ - { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \ - p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \ - { base + 0x14, 0, 32, 4, /* INTPRI10A */ \ - { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \ - p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } } - -#define INTC_IRQ_PINS_PRIO_16H(p, base) \ - { base + 0x18, 0, 32, 4, /* INTPRI20A */ \ - { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \ - p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \ - { base + 0x1c, 0, 32, 4, /* INTPRI30A */ \ - { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \ - p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } } - -#define INTC_IRQ_PINS_SENSE_16L(p, base) \ - { base + 0x00, 32, 4, /* ICR1A */ \ - { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \ - p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \ - { base + 0x04, 32, 4, /* ICR2A */ \ - { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \ - p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } } - -#define INTC_IRQ_PINS_SENSE_16H(p, base) \ - { base + 0x08, 32, 4, /* ICR3A */ \ - { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \ - p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \ - { base + 0x0c, 32, 4, /* ICR4A */ \ - { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \ - p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } } - -#define INTC_IRQ_PINS_ACK_16L(p, base) \ - { base + 0x20, 0, 8, /* INTREQ00A */ \ - { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \ - p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \ - { base + 0x24, 0, 8, /* INTREQ10A */ \ - { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \ - p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } } - -#define INTC_IRQ_PINS_ACK_16H(p, base) \ - { base + 0x28, 0, 8, /* INTREQ20A */ \ - { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \ - p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \ - { base + 0x2c, 0, 8, /* INTREQ30A */ \ - { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \ - p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } } - -#define INTC_IRQ_PINS_16(p, base, vect, str) \ - \ -static struct resource p ## _resources[] __initdata = { \ - [0] = { \ - .start = base, \ - .end = base + 0x64, \ - .flags = IORESOURCE_MEM, \ - }, \ -}; \ - \ -enum { \ - p ## _UNUSED = 0, \ - INTC_IRQ_PINS_ENUM_16L(p), \ -}; \ - \ -static struct intc_vect p ## _vectors[] __initdata = { \ - INTC_IRQ_PINS_VECT_16L(p, vect), \ -}; \ - \ -static struct intc_mask_reg p ## _mask_registers[] __initdata = { \ - INTC_IRQ_PINS_MASK_16L(p, base), \ -}; \ - \ -static struct intc_prio_reg p ## _prio_registers[] __initdata = { \ - INTC_IRQ_PINS_PRIO_16L(p, base), \ -}; \ - \ -static struct intc_sense_reg p ## _sense_registers[] __initdata = { \ - INTC_IRQ_PINS_SENSE_16L(p, base), \ -}; \ - \ -static struct intc_mask_reg p ## _ack_registers[] __initdata = { \ - INTC_IRQ_PINS_ACK_16L(p, base), \ -}; \ - \ -static struct intc_desc p ## _desc __initdata = { \ - .name = str, \ - .resource = p ## _resources, \ - .num_resources = ARRAY_SIZE(p ## _resources), \ - .hw = INTC_HW_DESC(p ## _vectors, NULL, \ - p ## _mask_registers, p ## _prio_registers, \ - p ## _sense_registers, p ## _ack_registers) \ -} - -#define INTC_IRQ_PINS_16H(p, base, vect, str) \ - \ -static struct resource p ## _resources[] __initdata = { \ - [0] = { \ - .start = base, \ - .end = base + 0x64, \ - .flags = IORESOURCE_MEM, \ - }, \ -}; \ - \ -enum { \ - p ## _UNUSED = 0, \ - INTC_IRQ_PINS_ENUM_16H(p), \ -}; \ - \ -static struct intc_vect p ## _vectors[] __initdata = { \ - INTC_IRQ_PINS_VECT_16H(p, vect), \ -}; \ - \ -static struct intc_mask_reg p ## _mask_registers[] __initdata = { \ - INTC_IRQ_PINS_MASK_16H(p, base), \ -}; \ - \ -static struct intc_prio_reg p ## _prio_registers[] __initdata = { \ - INTC_IRQ_PINS_PRIO_16H(p, base), \ -}; \ - \ -static struct intc_sense_reg p ## _sense_registers[] __initdata = { \ - INTC_IRQ_PINS_SENSE_16H(p, base), \ -}; \ - \ -static struct intc_mask_reg p ## _ack_registers[] __initdata = { \ - INTC_IRQ_PINS_ACK_16H(p, base), \ -}; \ - \ -static struct intc_desc p ## _desc __initdata = { \ - .name = str, \ - .resource = p ## _resources, \ - .num_resources = ARRAY_SIZE(p ## _resources), \ - .hw = INTC_HW_DESC(p ## _vectors, NULL, \ - p ## _mask_registers, p ## _prio_registers, \ - p ## _sense_registers, p ## _ack_registers) \ -} - -#define INTC_IRQ_PINS_32(p, base, vect, str) \ - \ -static struct resource p ## _resources[] __initdata = { \ - [0] = { \ - .start = base, \ - .end = base + 0x6c, \ - .flags = IORESOURCE_MEM, \ - }, \ -}; \ - \ -enum { \ - p ## _UNUSED = 0, \ - INTC_IRQ_PINS_ENUM_16L(p), \ - INTC_IRQ_PINS_ENUM_16H(p), \ -}; \ - \ -static struct intc_vect p ## _vectors[] __initdata = { \ - INTC_IRQ_PINS_VECT_16L(p, vect), \ - INTC_IRQ_PINS_VECT_16H(p, vect), \ -}; \ - \ -static struct intc_mask_reg p ## _mask_registers[] __initdata = { \ - INTC_IRQ_PINS_MASK_16L(p, base), \ - INTC_IRQ_PINS_MASK_16H(p, base), \ -}; \ - \ -static struct intc_prio_reg p ## _prio_registers[] __initdata = { \ - INTC_IRQ_PINS_PRIO_16L(p, base), \ - INTC_IRQ_PINS_PRIO_16H(p, base), \ -}; \ - \ -static struct intc_sense_reg p ## _sense_registers[] __initdata = { \ - INTC_IRQ_PINS_SENSE_16L(p, base), \ - INTC_IRQ_PINS_SENSE_16H(p, base), \ -}; \ - \ -static struct intc_mask_reg p ## _ack_registers[] __initdata = { \ - INTC_IRQ_PINS_ACK_16L(p, base), \ - INTC_IRQ_PINS_ACK_16H(p, base), \ -}; \ - \ -static struct intc_desc p ## _desc __initdata = { \ - .name = str, \ - .resource = p ## _resources, \ - .num_resources = ARRAY_SIZE(p ## _resources), \ - .hw = INTC_HW_DESC(p ## _vectors, NULL, \ - p ## _mask_registers, p ## _prio_registers, \ - p ## _sense_registers, p ## _ack_registers) \ -} - -#define INTC_PINT_E_EMPTY -#define INTC_PINT_E_NONE 0, 0, 0, 0, 0, 0, 0, 0, -#define INTC_PINT_E(p) \ - PINT ## p ## 0, PINT ## p ## 1, PINT ## p ## 2, PINT ## p ## 3, \ - PINT ## p ## 4, PINT ## p ## 5, PINT ## p ## 6, PINT ## p ## 7, - -#define INTC_PINT_V_NONE -#define INTC_PINT_V(p, vect) \ - vect(PINT ## p ## 0, 0), vect(PINT ## p ## 1, 1), \ - vect(PINT ## p ## 2, 2), vect(PINT ## p ## 3, 3), \ - vect(PINT ## p ## 4, 4), vect(PINT ## p ## 5, 5), \ - vect(PINT ## p ## 6, 6), vect(PINT ## p ## 7, 7), - -#define INTC_PINT(p, mask_reg, sense_base, str, \ - enums_1, enums_2, enums_3, enums_4, \ - vect_1, vect_2, vect_3, vect_4, \ - mask_a, mask_b, mask_c, mask_d, \ - sense_a, sense_b, sense_c, sense_d) \ - \ -enum { \ - PINT ## p ## _UNUSED = 0, \ - enums_1 enums_2 enums_3 enums_4 \ -}; \ - \ -static struct intc_vect p ## _vectors[] __initdata = { \ - vect_1 vect_2 vect_3 vect_4 \ -}; \ - \ -static struct intc_mask_reg p ## _mask_registers[] __initdata = { \ - { mask_reg, 0, 32, /* PINTER */ \ - { mask_a mask_b mask_c mask_d } } \ -}; \ - \ -static struct intc_sense_reg p ## _sense_registers[] __initdata = { \ - { sense_base + 0x00, 16, 2, /* PINTCR */ \ - { sense_a } }, \ - { sense_base + 0x04, 16, 2, /* PINTCR */ \ - { sense_b } }, \ - { sense_base + 0x08, 16, 2, /* PINTCR */ \ - { sense_c } }, \ - { sense_base + 0x0c, 16, 2, /* PINTCR */ \ - { sense_d } }, \ -}; \ - \ -static struct intc_desc p ## _desc __initdata = { \ - .name = str, \ - .hw = INTC_HW_DESC(p ## _vectors, NULL, \ - p ## _mask_registers, NULL, \ - p ## _sense_registers, NULL), \ -} - -/* INTCS */ -#define INTCS_VECT_BASE 0x3400 -#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect)) -#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt)) - -#endif /* __ASM_MACH_INTC_H */ diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c index 4e54512bee30..911884f7e28b 100644 --- a/arch/arm/mach-shmobile/platsmp-apmu.c +++ b/arch/arm/mach-shmobile/platsmp-apmu.c @@ -88,7 +88,7 @@ static void apmu_init_cpu(struct resource *res, int cpu, int bit) static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit), struct rcar_apmu_config *apmu_config, int num) { - u32 id; + int id; int k; int bit, index; bool is_allowed; @@ -170,7 +170,7 @@ static inline void cpu_enter_lowpower_a15(void) dsb(); } -void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu) +static void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu) { /* Select next sleep mode using the APMU */ diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c index 47a862e7f8ba..14c42a1bdf1e 100644 --- a/arch/arm/mach-shmobile/pm-r8a7779.c +++ b/arch/arm/mach-shmobile/pm-r8a7779.c @@ -9,20 +9,8 @@ * for more details. */ -#include <linux/pm.h> -#include <linux/suspend.h> -#include <linux/err.h> -#include <linux/pm_clock.h> -#include <linux/pm_domain.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/console.h> - #include <asm/io.h> -#include "common.h" #include "pm-rcar.h" #include "r8a7779.h" @@ -30,17 +18,6 @@ #define SYSCIER 0x0c #define SYSCIMR 0x10 -struct r8a7779_pm_domain { - struct generic_pm_domain genpd; - struct rcar_sysc_ch ch; -}; - -static inline -const struct rcar_sysc_ch *to_r8a7779_ch(struct generic_pm_domain *d) -{ - return &container_of(d, struct r8a7779_pm_domain, genpd)->ch; -} - #if defined(CONFIG_PM) || defined(CONFIG_SMP) static void __init r8a7779_sysc_init(void) @@ -58,82 +35,6 @@ static inline void r8a7779_sysc_init(void) {} #endif /* CONFIG_PM || CONFIG_SMP */ -#ifdef CONFIG_PM - -static int pd_power_down(struct generic_pm_domain *genpd) -{ - return rcar_sysc_power_down(to_r8a7779_ch(genpd)); -} - -static int pd_power_up(struct generic_pm_domain *genpd) -{ - return rcar_sysc_power_up(to_r8a7779_ch(genpd)); -} - -static bool pd_is_off(struct generic_pm_domain *genpd) -{ - return rcar_sysc_power_is_off(to_r8a7779_ch(genpd)); -} - -static bool pd_active_wakeup(struct device *dev) -{ - return true; -} - -static void r8a7779_init_pm_domain(struct r8a7779_pm_domain *r8a7779_pd) -{ - struct generic_pm_domain *genpd = &r8a7779_pd->genpd; - - pm_genpd_init(genpd, NULL, false); - genpd->dev_ops.active_wakeup = pd_active_wakeup; - genpd->power_off = pd_power_down; - genpd->power_on = pd_power_up; - - if (pd_is_off(&r8a7779_pd->genpd)) - pd_power_up(&r8a7779_pd->genpd); -} - -static struct r8a7779_pm_domain r8a7779_pm_domains[] = { - { - .genpd.name = "SH4A", - .ch = { - .chan_offs = 0x80, /* PWRSR1 .. PWRER1 */ - .isr_bit = 16, /* SH4A */ - }, - }, - { - .genpd.name = "SGX", - .ch = { - .chan_offs = 0xc0, /* PWRSR2 .. PWRER2 */ - .isr_bit = 20, /* SGX */ - }, - }, - { - .genpd.name = "VDP1", - .ch = { - .chan_offs = 0x100, /* PWRSR3 .. PWRER3 */ - .isr_bit = 21, /* VDP */ - }, - }, - { - .genpd.name = "IMPX3", - .ch = { - .chan_offs = 0x140, /* PWRSR4 .. PWRER4 */ - .isr_bit = 24, /* IMP */ - }, - }, -}; - -void __init r8a7779_init_pm_domains(void) -{ - int j; - - for (j = 0; j < ARRAY_SIZE(r8a7779_pm_domains); j++) - r8a7779_init_pm_domain(&r8a7779_pm_domains[j]); -} - -#endif /* CONFIG_PM */ - void __init r8a7779_pm_init(void) { static int once; diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c index 89068c8ec50f..46d0a1ddce75 100644 --- a/arch/arm/mach-shmobile/pm-rmobile.c +++ b/arch/arm/mach-shmobile/pm-rmobile.c @@ -313,8 +313,10 @@ static int __init rmobile_add_pm_domains(void __iomem *base, } pd = kzalloc(sizeof(*pd), GFP_KERNEL); - if (!pd) + if (!pd) { + of_node_put(np); return -ENOMEM; + } pd->genpd.name = np->name; pd->base = base; diff --git a/arch/arm/mach-shmobile/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h index 30a4a421ee31..8146bb6d7237 100644 --- a/arch/arm/mach-shmobile/pm-rmobile.h +++ b/arch/arm/mach-shmobile/pm-rmobile.h @@ -12,10 +12,6 @@ #include <linux/pm_domain.h> -#define DEFAULT_DEV_LATENCY_NS 250000 - -struct platform_device; - struct rmobile_pm_domain { struct generic_pm_domain genpd; struct dev_power_governor *gov; @@ -26,9 +22,4 @@ struct rmobile_pm_domain { bool no_debug; }; -struct pm_domain_device { - const char *domain_name; - struct platform_device *pdev; -}; - #endif /* PM_RMOBILE_H */ diff --git a/arch/arm/mach-shmobile/r8a7778.h b/arch/arm/mach-shmobile/r8a7778.h deleted file mode 100644 index f64fedb1f2cc..000000000000 --- a/arch/arm/mach-shmobile/r8a7778.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * Copyright (C) 2013 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __ASM_R8A7778_H__ -#define __ASM_R8A7778_H__ - -#include <linux/sh_eth.h> - -/* HPB-DMA slave IDs */ -enum { - HPBDMA_SLAVE_DUMMY, - HPBDMA_SLAVE_SDHI0_TX, - HPBDMA_SLAVE_SDHI0_RX, - HPBDMA_SLAVE_SSI0_TX, - HPBDMA_SLAVE_SSI0_RX, - HPBDMA_SLAVE_SSI1_TX, - HPBDMA_SLAVE_SSI1_RX, - HPBDMA_SLAVE_SSI2_TX, - HPBDMA_SLAVE_SSI2_RX, - HPBDMA_SLAVE_SSI3_TX, - HPBDMA_SLAVE_SSI3_RX, - HPBDMA_SLAVE_SSI4_TX, - HPBDMA_SLAVE_SSI4_RX, - HPBDMA_SLAVE_SSI5_TX, - HPBDMA_SLAVE_SSI5_RX, - HPBDMA_SLAVE_SSI6_TX, - HPBDMA_SLAVE_SSI6_RX, - HPBDMA_SLAVE_SSI7_TX, - HPBDMA_SLAVE_SSI7_RX, - HPBDMA_SLAVE_SSI8_TX, - HPBDMA_SLAVE_SSI8_RX, - HPBDMA_SLAVE_HPBIF0_TX, - HPBDMA_SLAVE_HPBIF0_RX, - HPBDMA_SLAVE_HPBIF1_TX, - HPBDMA_SLAVE_HPBIF1_RX, - HPBDMA_SLAVE_HPBIF2_TX, - HPBDMA_SLAVE_HPBIF2_RX, - HPBDMA_SLAVE_HPBIF3_TX, - HPBDMA_SLAVE_HPBIF3_RX, - HPBDMA_SLAVE_HPBIF4_TX, - HPBDMA_SLAVE_HPBIF4_RX, - HPBDMA_SLAVE_HPBIF5_TX, - HPBDMA_SLAVE_HPBIF5_RX, - HPBDMA_SLAVE_HPBIF6_TX, - HPBDMA_SLAVE_HPBIF6_RX, - HPBDMA_SLAVE_HPBIF7_TX, - HPBDMA_SLAVE_HPBIF7_RX, - HPBDMA_SLAVE_HPBIF8_TX, - HPBDMA_SLAVE_HPBIF8_RX, - HPBDMA_SLAVE_USBFUNC_TX, - HPBDMA_SLAVE_USBFUNC_RX, -}; - -extern void r8a7778_add_standard_devices(void); -extern void r8a7778_add_standard_devices_dt(void); -extern void r8a7778_add_dt_devices(void); - -extern void r8a7778_init_late(void); -extern void r8a7778_init_irq_dt(void); -extern void r8a7778_clock_init(void); -extern void r8a7778_init_irq_extpin(int irlm); -extern void r8a7778_init_irq_extpin_dt(int irlm); -extern void r8a7778_pinmux_init(void); - -extern int r8a7778_usb_phy_power(bool enable); - -#endif /* __ASM_R8A7778_H__ */ diff --git a/arch/arm/mach-shmobile/r8a7779.h b/arch/arm/mach-shmobile/r8a7779.h index db303f76704e..e1aaa2ef9376 100644 --- a/arch/arm/mach-shmobile/r8a7779.h +++ b/arch/arm/mach-shmobile/r8a7779.h @@ -1,16 +1,8 @@ #ifndef __ASM_R8A7779_H__ #define __ASM_R8A7779_H__ -#include <linux/sh_clk.h> - extern void r8a7779_pm_init(void); -#ifdef CONFIG_PM -extern void __init r8a7779_init_pm_domains(void); -#else -static inline void r8a7779_init_pm_domains(void) {} -#endif /* CONFIG_PM */ - extern struct smp_operations r8a7779_smp_ops; #endif /* __ASM_R8A7779_H__ */ diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index b9116c81e54b..0ab9d3272875 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -16,35 +16,16 @@ */ #include <linux/clk/shmobile.h> -#include <linux/kernel.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> -#include <linux/of.h> -#include <linux/of_platform.h> -#include <linux/platform_data/dma-rcar-hpbdma.h> -#include <linux/platform_data/gpio-rcar.h> -#include <linux/platform_data/irq-renesas-intc-irqpin.h> -#include <linux/platform_device.h> #include <linux/irqchip.h> -#include <linux/serial_sci.h> -#include <linux/sh_timer.h> -#include <linux/pm_runtime.h> -#include <linux/usb/phy.h> -#include <linux/usb/hcd.h> -#include <linux/usb/ehci_pdriver.h> -#include <linux/usb/ohci_pdriver.h> -#include <linux/dma-mapping.h> #include <asm/mach/arch.h> -#include <asm/hardware/cache-l2x0.h> #include "common.h" #include "irqs.h" -#include "r8a7778.h" #define MODEMR 0xffcc0020 -#ifdef CONFIG_COMMON_CLK static void __init r8a7778_timer_init(void) { u32 mode; @@ -55,555 +36,21 @@ static void __init r8a7778_timer_init(void) iounmap(modemr); r8a7778_clocks_init(mode); } -#endif -/* SCIF */ -#define R8A7778_SCIF(index, baseaddr, irq) \ -static struct plat_sci_port scif##index##_platform_data = { \ - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \ - .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, \ - .type = PORT_SCIF, \ -}; \ - \ -static struct resource scif##index##_resources[] = { \ - DEFINE_RES_MEM(baseaddr, 0x100), \ - DEFINE_RES_IRQ(irq), \ -} - -R8A7778_SCIF(0, 0xffe40000, gic_iid(0x66)); -R8A7778_SCIF(1, 0xffe41000, gic_iid(0x67)); -R8A7778_SCIF(2, 0xffe42000, gic_iid(0x68)); -R8A7778_SCIF(3, 0xffe43000, gic_iid(0x69)); -R8A7778_SCIF(4, 0xffe44000, gic_iid(0x6a)); -R8A7778_SCIF(5, 0xffe45000, gic_iid(0x6b)); - -#define r8a7778_register_scif(index) \ - platform_device_register_resndata(NULL, "sh-sci", index, \ - scif##index##_resources, \ - ARRAY_SIZE(scif##index##_resources), \ - &scif##index##_platform_data, \ - sizeof(scif##index##_platform_data)) - -/* TMU */ -static struct sh_timer_config sh_tmu0_platform_data = { - .channels_mask = 7, -}; - -static struct resource sh_tmu0_resources[] = { - DEFINE_RES_MEM(0xffd80000, 0x30), - DEFINE_RES_IRQ(gic_iid(0x40)), - DEFINE_RES_IRQ(gic_iid(0x41)), - DEFINE_RES_IRQ(gic_iid(0x42)), -}; - -#define r8a7778_register_tmu(idx) \ - platform_device_register_resndata( \ - NULL, "sh-tmu", idx, \ - sh_tmu##idx##_resources, \ - ARRAY_SIZE(sh_tmu##idx##_resources), \ - &sh_tmu##idx##_platform_data, \ - sizeof(sh_tmu##idx##_platform_data)) - -int r8a7778_usb_phy_power(bool enable) -{ - static struct usb_phy *phy = NULL; - int ret = 0; - - if (!phy) - phy = usb_get_phy(USB_PHY_TYPE_USB2); - - if (IS_ERR(phy)) { - pr_err("kernel doesn't have usb phy driver\n"); - return PTR_ERR(phy); - } - - if (enable) - ret = usb_phy_init(phy); - else - usb_phy_shutdown(phy); - - return ret; -} - -/* USB */ -static int usb_power_on(struct platform_device *pdev) -{ - int ret = r8a7778_usb_phy_power(true); - - if (ret) - return ret; - - pm_runtime_enable(&pdev->dev); - pm_runtime_get_sync(&pdev->dev); - - return 0; -} - -static void usb_power_off(struct platform_device *pdev) -{ - if (r8a7778_usb_phy_power(false)) - return; - - pm_runtime_put_sync(&pdev->dev); - pm_runtime_disable(&pdev->dev); -} - -static int ehci_init_internal_buffer(struct usb_hcd *hcd) -{ - /* - * Below are recommended values from the datasheet; - * see [USB :: Setting of EHCI Internal Buffer]. - */ - /* EHCI IP internal buffer setting */ - iowrite32(0x00ff0040, hcd->regs + 0x0094); - /* EHCI IP internal buffer enable */ - iowrite32(0x00000001, hcd->regs + 0x009C); - - return 0; -} - -static struct usb_ehci_pdata ehci_pdata __initdata = { - .power_on = usb_power_on, - .power_off = usb_power_off, - .power_suspend = usb_power_off, - .pre_setup = ehci_init_internal_buffer, -}; - -static struct resource ehci_resources[] __initdata = { - DEFINE_RES_MEM(0xffe70000, 0x400), - DEFINE_RES_IRQ(gic_iid(0x4c)), -}; - -static struct usb_ohci_pdata ohci_pdata __initdata = { - .power_on = usb_power_on, - .power_off = usb_power_off, - .power_suspend = usb_power_off, -}; - -static struct resource ohci_resources[] __initdata = { - DEFINE_RES_MEM(0xffe70400, 0x400), - DEFINE_RES_IRQ(gic_iid(0x4c)), -}; - -#define USB_PLATFORM_INFO(hci) \ -static struct platform_device_info hci##_info __initdata = { \ - .name = #hci "-platform", \ - .id = -1, \ - .res = hci##_resources, \ - .num_res = ARRAY_SIZE(hci##_resources), \ - .data = &hci##_pdata, \ - .size_data = sizeof(hci##_pdata), \ - .dma_mask = DMA_BIT_MASK(32), \ -} - -USB_PLATFORM_INFO(ehci); -USB_PLATFORM_INFO(ohci); - -/* PFC/GPIO */ -static struct resource pfc_resources[] __initdata = { - DEFINE_RES_MEM(0xfffc0000, 0x118), -}; - -#define R8A7778_GPIO(idx) \ -static struct resource r8a7778_gpio##idx##_resources[] __initdata = { \ - DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30), \ - DEFINE_RES_IRQ(gic_iid(0x87)), \ -}; \ - \ -static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \ - .gpio_base = 32 * (idx), \ - .irq_base = GPIO_IRQ_BASE(idx), \ - .number_of_pins = 32, \ - .pctl_name = "pfc-r8a7778", \ -} - -R8A7778_GPIO(0); -R8A7778_GPIO(1); -R8A7778_GPIO(2); -R8A7778_GPIO(3); -R8A7778_GPIO(4); - -#define r8a7778_register_gpio(idx) \ - platform_device_register_resndata( \ - NULL, "gpio_rcar", idx, \ - r8a7778_gpio##idx##_resources, \ - ARRAY_SIZE(r8a7778_gpio##idx##_resources), \ - &r8a7778_gpio##idx##_platform_data, \ - sizeof(r8a7778_gpio##idx##_platform_data)) - -void __init r8a7778_pinmux_init(void) -{ - platform_device_register_simple( - "pfc-r8a7778", -1, - pfc_resources, - ARRAY_SIZE(pfc_resources)); - - r8a7778_register_gpio(0); - r8a7778_register_gpio(1); - r8a7778_register_gpio(2); - r8a7778_register_gpio(3); - r8a7778_register_gpio(4); -}; - -/* I2C */ -static struct resource i2c_resources[] __initdata = { - /* I2C0 */ - DEFINE_RES_MEM(0xffc70000, 0x1000), - DEFINE_RES_IRQ(gic_iid(0x63)), - /* I2C1 */ - DEFINE_RES_MEM(0xffc71000, 0x1000), - DEFINE_RES_IRQ(gic_iid(0x6e)), - /* I2C2 */ - DEFINE_RES_MEM(0xffc72000, 0x1000), - DEFINE_RES_IRQ(gic_iid(0x6c)), - /* I2C3 */ - DEFINE_RES_MEM(0xffc73000, 0x1000), - DEFINE_RES_IRQ(gic_iid(0x6d)), -}; - -static void __init r8a7778_register_i2c(int id) -{ - BUG_ON(id < 0 || id > 3); - - platform_device_register_simple( - "i2c-rcar", id, - i2c_resources + (2 * id), 2); -} - -/* HSPI */ -static struct resource hspi_resources[] __initdata = { - /* HSPI0 */ - DEFINE_RES_MEM(0xfffc7000, 0x18), - DEFINE_RES_IRQ(gic_iid(0x5f)), - /* HSPI1 */ - DEFINE_RES_MEM(0xfffc8000, 0x18), - DEFINE_RES_IRQ(gic_iid(0x74)), - /* HSPI2 */ - DEFINE_RES_MEM(0xfffc6000, 0x18), - DEFINE_RES_IRQ(gic_iid(0x75)), -}; - -static void __init r8a7778_register_hspi(int id) -{ - BUG_ON(id < 0 || id > 2); - - platform_device_register_simple( - "sh-hspi", id, - hspi_resources + (2 * id), 2); -} - -void __init r8a7778_add_dt_devices(void) -{ -#ifdef CONFIG_CACHE_L2X0 - void __iomem *base = ioremap_nocache(0xf0100000, 0x1000); - if (base) { - /* - * Shared attribute override enable, 64K*16way - * don't call iounmap(base) - */ - l2x0_init(base, 0x00400000, 0xc20f0fff); - } -#endif -} - -/* HPB-DMA */ - -/* Asynchronous mode register (ASYNCMDR) bits */ -#define HPB_DMAE_ASYNCMDR_ASMD22_MASK BIT(2) /* SDHI0 */ -#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE BIT(2) /* SDHI0 */ -#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI 0 /* SDHI0 */ -#define HPB_DMAE_ASYNCMDR_ASMD21_MASK BIT(1) /* SDHI0 */ -#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE BIT(1) /* SDHI0 */ -#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI 0 /* SDHI0 */ - -#define HPBDMA_SSI(_id) \ -{ \ - .id = HPBDMA_SLAVE_SSI## _id ##_TX, \ - .addr = 0xffd91008 + (_id * 0x40), \ - .dcr = HPB_DMAE_DCR_CT | \ - HPB_DMAE_DCR_DIP | \ - HPB_DMAE_DCR_SPDS_32BIT | \ - HPB_DMAE_DCR_DMDL | \ - HPB_DMAE_DCR_DPDS_32BIT, \ - .port = _id + (_id << 8), \ - .dma_ch = (28 + _id), \ -}, { \ - .id = HPBDMA_SLAVE_SSI## _id ##_RX, \ - .addr = 0xffd9100c + (_id * 0x40), \ - .dcr = HPB_DMAE_DCR_CT | \ - HPB_DMAE_DCR_DIP | \ - HPB_DMAE_DCR_SMDL | \ - HPB_DMAE_DCR_SPDS_32BIT | \ - HPB_DMAE_DCR_DPDS_32BIT, \ - .port = _id + (_id << 8), \ - .dma_ch = (28 + _id), \ -} - -#define HPBDMA_HPBIF(_id) \ -{ \ - .id = HPBDMA_SLAVE_HPBIF## _id ##_TX, \ - .addr = 0xffda0000 + (_id * 0x1000), \ - .dcr = HPB_DMAE_DCR_CT | \ - HPB_DMAE_DCR_DIP | \ - HPB_DMAE_DCR_SPDS_32BIT | \ - HPB_DMAE_DCR_DMDL | \ - HPB_DMAE_DCR_DPDS_32BIT, \ - .port = 0x1111, \ - .dma_ch = (28 + _id), \ -}, { \ - .id = HPBDMA_SLAVE_HPBIF## _id ##_RX, \ - .addr = 0xffda0000 + (_id * 0x1000), \ - .dcr = HPB_DMAE_DCR_CT | \ - HPB_DMAE_DCR_DIP | \ - HPB_DMAE_DCR_SMDL | \ - HPB_DMAE_DCR_SPDS_32BIT | \ - HPB_DMAE_DCR_DPDS_32BIT, \ - .port = 0x1111, \ - .dma_ch = (28 + _id), \ -} - -static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = { - { - .id = HPBDMA_SLAVE_SDHI0_TX, - .addr = 0xffe4c000 + 0x30, - .dcr = HPB_DMAE_DCR_SPDS_16BIT | - HPB_DMAE_DCR_DMDL | - HPB_DMAE_DCR_DPDS_16BIT, - .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 | - HPB_DMAE_ASYNCRSTR_ASRST22 | - HPB_DMAE_ASYNCRSTR_ASRST23, - .mdr = HPB_DMAE_ASYNCMDR_ASMD21_MULTI, - .mdm = HPB_DMAE_ASYNCMDR_ASMD21_MASK, - .port = 0x0D0C, - .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE, - .dma_ch = 21, - }, { - .id = HPBDMA_SLAVE_SDHI0_RX, - .addr = 0xffe4c000 + 0x30, - .dcr = HPB_DMAE_DCR_SMDL | - HPB_DMAE_DCR_SPDS_16BIT | - HPB_DMAE_DCR_DPDS_16BIT, - .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 | - HPB_DMAE_ASYNCRSTR_ASRST22 | - HPB_DMAE_ASYNCRSTR_ASRST23, - .mdr = HPB_DMAE_ASYNCMDR_ASMD22_MULTI, - .mdm = HPB_DMAE_ASYNCMDR_ASMD22_MASK, - .port = 0x0D0C, - .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE, - .dma_ch = 22, - }, { - .id = HPBDMA_SLAVE_USBFUNC_TX, /* for D0 */ - .addr = 0xffe60018, - .dcr = HPB_DMAE_DCR_SPDS_32BIT | - HPB_DMAE_DCR_DMDL | - HPB_DMAE_DCR_DPDS_32BIT, - .port = 0x0000, - .dma_ch = 14, - }, { - .id = HPBDMA_SLAVE_USBFUNC_RX, /* for D1 */ - .addr = 0xffe6001c, - .dcr = HPB_DMAE_DCR_SMDL | - HPB_DMAE_DCR_SPDS_32BIT | - HPB_DMAE_DCR_DPDS_32BIT, - .port = 0x0101, - .dma_ch = 15, - }, - - HPBDMA_SSI(0), - HPBDMA_SSI(1), - HPBDMA_SSI(2), - HPBDMA_SSI(3), - HPBDMA_SSI(4), - HPBDMA_SSI(5), - HPBDMA_SSI(6), - HPBDMA_SSI(7), - HPBDMA_SSI(8), - - HPBDMA_HPBIF(0), - HPBDMA_HPBIF(1), - HPBDMA_HPBIF(2), - HPBDMA_HPBIF(3), - HPBDMA_HPBIF(4), - HPBDMA_HPBIF(5), - HPBDMA_HPBIF(6), - HPBDMA_HPBIF(7), - HPBDMA_HPBIF(8), -}; - -static const struct hpb_dmae_channel hpb_dmae_channels[] = { - HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_TX), /* ch. 14 */ - HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_RX), /* ch. 15 */ - HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */ - HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_TX), /* ch. 28 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_RX), /* ch. 28 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_TX), /* ch. 28 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_RX), /* ch. 28 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_TX), /* ch. 29 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_RX), /* ch. 29 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_TX), /* ch. 29 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_RX), /* ch. 29 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_TX), /* ch. 30 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_RX), /* ch. 30 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_TX), /* ch. 30 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_RX), /* ch. 30 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_TX), /* ch. 31 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_RX), /* ch. 31 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_TX), /* ch. 31 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_RX), /* ch. 31 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_TX), /* ch. 32 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_RX), /* ch. 32 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_TX), /* ch. 32 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_RX), /* ch. 32 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_TX), /* ch. 33 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_RX), /* ch. 33 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_TX), /* ch. 33 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_RX), /* ch. 33 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_TX), /* ch. 34 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_RX), /* ch. 34 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_TX), /* ch. 34 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_RX), /* ch. 34 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_TX), /* ch. 35 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_RX), /* ch. 35 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_TX), /* ch. 35 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_RX), /* ch. 35 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_TX), /* ch. 36 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_RX), /* ch. 36 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_TX), /* ch. 36 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_RX), /* ch. 36 */ -}; - -static struct hpb_dmae_pdata dma_platform_data __initdata = { - .slaves = hpb_dmae_slaves, - .num_slaves = ARRAY_SIZE(hpb_dmae_slaves), - .channels = hpb_dmae_channels, - .num_channels = ARRAY_SIZE(hpb_dmae_channels), - .ts_shift = { - [XMIT_SZ_8BIT] = 0, - [XMIT_SZ_16BIT] = 1, - [XMIT_SZ_32BIT] = 2, - }, - .num_hw_channels = 39, -}; - -static struct resource hpb_dmae_resources[] __initdata = { - /* Channel registers */ - DEFINE_RES_MEM(0xffc08000, 0x1000), - /* Common registers */ - DEFINE_RES_MEM(0xffc09000, 0x170), - /* Asynchronous reset registers */ - DEFINE_RES_MEM(0xffc00300, 4), - /* Asynchronous mode registers */ - DEFINE_RES_MEM(0xffc00400, 4), - /* IRQ for DMA channels */ - DEFINE_RES_NAMED(gic_iid(0x7b), 5, NULL, IORESOURCE_IRQ), -}; - -static void __init r8a7778_register_hpb_dmae(void) -{ - platform_device_register_resndata(NULL, "hpb-dma-engine", - -1, hpb_dmae_resources, - ARRAY_SIZE(hpb_dmae_resources), - &dma_platform_data, - sizeof(dma_platform_data)); -} - -void __init r8a7778_add_standard_devices(void) -{ - r8a7778_add_dt_devices(); - r8a7778_register_tmu(0); - r8a7778_register_scif(0); - r8a7778_register_scif(1); - r8a7778_register_scif(2); - r8a7778_register_scif(3); - r8a7778_register_scif(4); - r8a7778_register_scif(5); - r8a7778_register_i2c(0); - r8a7778_register_i2c(1); - r8a7778_register_i2c(2); - r8a7778_register_i2c(3); - r8a7778_register_hspi(0); - r8a7778_register_hspi(1); - r8a7778_register_hspi(2); - - r8a7778_register_hpb_dmae(); -} - -void __init r8a7778_init_late(void) -{ - shmobile_init_late(); - platform_device_register_full(&ehci_info); - platform_device_register_full(&ohci_info); -} - -static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = { - .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */ - .sense_bitfield_width = 2, -}; - -static struct resource irqpin_resources[] __initdata = { - DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */ - DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */ - DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */ - DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */ - DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */ - DEFINE_RES_IRQ(gic_iid(0x3b)), /* IRQ0 */ - DEFINE_RES_IRQ(gic_iid(0x3c)), /* IRQ1 */ - DEFINE_RES_IRQ(gic_iid(0x3d)), /* IRQ2 */ - DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */ -}; - -void __init r8a7778_init_irq_extpin_dt(int irlm) -{ - void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE); - unsigned long tmp; - - if (!icr0) { - pr_warn("r8a7778: unable to setup external irq pin mode\n"); - return; - } - - tmp = ioread32(icr0); - if (irlm) - tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */ - else - tmp &= ~(1 << 23); /* IRL mode - not supported */ - tmp |= (1 << 21); /* LVLMODE = 1 */ - iowrite32(tmp, icr0); - iounmap(icr0); -} - -void __init r8a7778_init_irq_extpin(int irlm) -{ - r8a7778_init_irq_extpin_dt(irlm); - if (irlm) - platform_device_register_resndata( - NULL, "renesas_intc_irqpin", -1, - irqpin_resources, ARRAY_SIZE(irqpin_resources), - &irqpin_platform_data, sizeof(irqpin_platform_data)); -} - -#ifdef CONFIG_USE_OF #define INT2SMSKCR0 0x82288 /* 0xfe782288 */ #define INT2SMSKCR1 0x8228c /* 0xfe78228c */ #define INT2NTSR0 0x00018 /* 0xfe700018 */ #define INT2NTSR1 0x0002c /* 0xfe70002c */ -void __init r8a7778_init_irq_dt(void) + +static void __init r8a7778_init_irq_dt(void) { void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000); -#ifdef CONFIG_ARCH_SHMOBILE_LEGACY - void __iomem *gic_dist_base = ioremap_nocache(0xfe438000, 0x1000); - void __iomem *gic_cpu_base = ioremap_nocache(0xfe430000, 0x1000); -#endif BUG_ON(!base); -#ifdef CONFIG_ARCH_SHMOBILE_LEGACY - gic_init(0, 29, gic_dist_base, gic_cpu_base); -#else irqchip_init(); -#endif + /* route all interrupts to ARM */ __raw_writel(0x73ffffff, base + INT2NTSR0); __raw_writel(0xffffffff, base + INT2NTSR1); @@ -624,10 +71,6 @@ DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)") .init_early = shmobile_init_delay, .init_irq = r8a7778_init_irq_dt, .init_late = shmobile_init_late, -#ifdef CONFIG_COMMON_CLK .init_time = r8a7778_timer_init, -#endif .dt_compat = r8a7778_compat_dt, MACHINE_END - -#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 6bfa6407a27c..1e572a903f8e 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -97,7 +97,7 @@ static u32 __init r8a7779_read_mode_pins(void) static void __init r8a7779_init_time(void) { r8a7779_clocks_init(r8a7779_read_mode_pins()); - clocksource_of_init(); + clocksource_probe(); } static const char *const r8a7779_compat_dt[] __initconst = { diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index aa3339258d9c..9eccde3c7b13 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -128,7 +128,7 @@ void __init rcar_gen2_timer_init(void) #endif /* CONFIG_ARM_ARCH_TIMER */ rcar_gen2_clocks_init(mode); - clocksource_of_init(); + clocksource_probe(); } struct memory_reserve_config { diff --git a/arch/arm/mach-shmobile/sh-gpio.h b/arch/arm/mach-shmobile/sh-gpio.h deleted file mode 100644 index 2c4141413db9..000000000000 --- a/arch/arm/mach-shmobile/sh-gpio.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Generic GPIO API and pinmux table support - * - * Copyright (c) 2008 Magnus Damm - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/io.h> - -/* - * FIXME !! - * - * current gpio frame work doesn't have - * the method to control only pull up/down/free. - * this function should be replaced by correct gpio function - */ -static inline void __init gpio_direction_none(void __iomem * addr) -{ - __raw_writeb(0x00, addr); -} - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index f1d027aa7a81..c17d4d3881ff 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -77,24 +77,3 @@ void __init shmobile_init_delay(void) shmobile_setup_delay_hz(max_freq, 2, 4); } } - -static void __init shmobile_late_time_init(void) -{ - /* - * Make sure all compiled-in early timers register themselves. - * - * Run probe() for two "earlytimer" devices, these will be the - * clockevents and clocksource devices respectively. In the event - * that only a clockevents device is available, we -ENODEV on the - * clocksource and the jiffies clocksource is used transparently - * instead. No error handling is necessary here. - */ - early_platform_driver_register_all("earlytimer"); - early_platform_driver_probe("earlytimer", 2, 0); -} - -void __init shmobile_earlytimer_init(void) -{ - late_time_init = shmobile_late_time_init; -} - diff --git a/arch/arm/mach-spear/hotplug.c b/arch/arm/mach-spear/hotplug.c index d97749c642ce..12edd1cf8a12 100644 --- a/arch/arm/mach-spear/hotplug.c +++ b/arch/arm/mach-spear/hotplug.c @@ -80,7 +80,7 @@ static inline void spear13xx_do_lowpower(unsigned int cpu, int *spurious) * * Called with IRQs disabled */ -void __ref spear13xx_cpu_die(unsigned int cpu) +void spear13xx_cpu_die(unsigned int cpu) { int spurious = 0; diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c index b7afce6795f4..ca2f6a82a414 100644 --- a/arch/arm/mach-spear/spear13xx.c +++ b/arch/arm/mach-spear/spear13xx.c @@ -124,5 +124,5 @@ void __init spear13xx_timer_init(void) clk_put(pclk); spear_setup_of_timer(); - clocksource_of_init(); + clocksource_probe(); } diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 8583a9ca86bd..c2be98f38e73 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -47,7 +47,7 @@ static void __init sun6i_timer_init(void) of_clk_init(NULL); if (IS_ENABLED(CONFIG_RESET_CONTROLLER)) sun6i_reset_init(); - clocksource_of_init(); + clocksource_probe(); } DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family") diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c index 6fc71f1534b0..1b129899a277 100644 --- a/arch/arm/mach-tegra/hotplug.c +++ b/arch/arm/mach-tegra/hotplug.c @@ -37,7 +37,7 @@ int tegra_cpu_kill(unsigned cpu) * * Called with IRQs disabled */ -void __ref tegra_cpu_die(unsigned int cpu) +void tegra_cpu_die(unsigned int cpu) { if (!tegra_hotplug_shutdown) { WARN(1, "hotplug is not yet initialized\n"); diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 35670b15f281..546338bbacf8 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -408,7 +408,7 @@ static const char * u300_board_compat[] = { DT_MACHINE_START(U300_DT, "U300 S335/B335 (Device Tree)") .map_io = u300_map_io, .init_irq = u300_init_irq_dt, - .init_time = clocksource_of_init, + .init_time = clocksource_probe, .init_machine = u300_init_machine_dt, .restart = u300_restart, .dt_compat = u300_board_compat, diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c index 131996805690..68fe986ca42e 100644 --- a/arch/arm/mach-u300/dummyspichip.c +++ b/arch/arm/mach-u300/dummyspichip.c @@ -264,7 +264,6 @@ static const struct of_device_id pl022_dummy_dt_match[] = { static struct spi_driver pl022_dummy_driver = { .driver = { .name = "spi-dummy", - .owner = THIS_MODULE, .of_match_table = pl022_dummy_dt_match, }, .probe = pl022_dummy_probe, diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c index 2bc00b085e38..1cbed0331fd3 100644 --- a/arch/arm/mach-ux500/hotplug.c +++ b/arch/arm/mach-ux500/hotplug.c @@ -21,7 +21,7 @@ * * Called with IRQs disabled */ -void __ref ux500_cpu_die(unsigned int cpu) +void ux500_cpu_die(unsigned int cpu) { /* directly enter low power state, skipping secure registers */ for (;;) { diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index ff28d8ad1ed7..8d2d233f8e6c 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -44,5 +44,5 @@ void __init ux500_timer_init(void) dt_fail: clksrc_dbx500_prcmu_init(prcmu_timer_base); - clocksource_of_init(); + clocksource_probe(); } diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c index f0ce6b8f5e71..f2fafc10a91d 100644 --- a/arch/arm/mach-vexpress/hotplug.c +++ b/arch/arm/mach-vexpress/hotplug.c @@ -85,7 +85,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) * * Called with IRQs disabled */ -void __ref vexpress_cpu_die(unsigned int cpu) +void vexpress_cpu_die(unsigned int cpu) { int spurious = 0; diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 5a6e4e20ca0a..6f39d03cc27e 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -154,7 +154,7 @@ static void __init zynq_timer_init(void) zynq_clock_init(); of_clk_init(NULL); - clocksource_of_init(); + clocksource_probe(); } static struct map_desc zynq_cortex_a9_scu_map __initdata = { diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index a2e74b26d9db..41218867a9a6 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -419,28 +419,24 @@ config CPU_THUMBONLY config CPU_32v3 bool select CPU_USE_DOMAINS if MMU - select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select NEED_KUSER_HELPERS select TLS_REG_EMUL if SMP || !MMU config CPU_32v4 bool select CPU_USE_DOMAINS if MMU - select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select NEED_KUSER_HELPERS select TLS_REG_EMUL if SMP || !MMU config CPU_32v4T bool select CPU_USE_DOMAINS if MMU - select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select NEED_KUSER_HELPERS select TLS_REG_EMUL if SMP || !MMU config CPU_32v5 bool select CPU_USE_DOMAINS if MMU - select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select NEED_KUSER_HELPERS select TLS_REG_EMUL if SMP || !MMU @@ -805,14 +801,6 @@ config TLS_REG_EMUL a few prototypes like that in existence) and therefore access to that required register must be emulated. -config NEEDS_SYSCALL_FOR_CMPXCHG - bool - select NEED_KUSER_HELPERS - help - SMP on a pre-ARMv6 processor? Well OK then. - Forget about fast user space cmpxchg support. - It is just not possible. - config NEED_KUSER_HELPERS bool diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 00b7f7de28a1..7d5f4c736a16 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -803,7 +803,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) } } } else { - fault = probe_kernel_address(instrptr, instr); + fault = probe_kernel_address((void *)instrptr, instr); instr = __mem_to_opcode_arm(instr); } diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 1a7815e5421b..e62400e5fb99 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -651,12 +651,12 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, if (nommu()) addr = __alloc_simple_buffer(dev, size, gfp, &page); - else if (dev_get_cma_area(dev) && (gfp & __GFP_WAIT)) + else if (dev_get_cma_area(dev) && (gfp & __GFP_DIRECT_RECLAIM)) addr = __alloc_from_contiguous(dev, size, prot, &page, caller, want_vaddr); else if (is_coherent) addr = __alloc_simple_buffer(dev, size, gfp, &page); - else if (!(gfp & __GFP_WAIT)) + else if (!gfpflags_allow_blocking(gfp)) addr = __alloc_from_pool(size, &page); else addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, @@ -1363,7 +1363,7 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, *handle = DMA_ERROR_CODE; size = PAGE_ALIGN(size); - if (!(gfp & __GFP_WAIT)) + if (!gfpflags_allow_blocking(gfp)) return __iommu_alloc_atomic(dev, size, handle); /* @@ -1407,12 +1407,19 @@ static int arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma, unsigned long uaddr = vma->vm_start; unsigned long usize = vma->vm_end - vma->vm_start; struct page **pages = __iommu_get_pages(cpu_addr, attrs); + unsigned long nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT; + unsigned long off = vma->vm_pgoff; vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot); if (!pages) return -ENXIO; + if (off >= nr_pages || (usize >> PAGE_SHIFT) > nr_pages - off) + return -ENXIO; + + pages += off; + do { int ret = vm_insert_page(vma, uaddr, *pages++); if (ret) { diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 0d629b8f973f..daafcf121ce0 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -593,6 +593,28 @@ do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs) arm_notify_die("", regs, &info, ifsr, 0); } +/* + * Abort handler to be used only during first unmasking of asynchronous aborts + * on the boot CPU. This makes sure that the machine will not die if the + * firmware/bootloader left an imprecise abort pending for us to trip over. + */ +static int __init early_abort_handler(unsigned long addr, unsigned int fsr, + struct pt_regs *regs) +{ + pr_warn("Hit pending asynchronous external abort (FSR=0x%08x) during " + "first unmask, this is most likely caused by a " + "firmware/bootloader bug.\n", fsr); + + return 0; +} + +void __init early_abt_enable(void) +{ + fsr_info[22].fn = early_abort_handler; + local_abt_enable(); + fsr_info[22].fn = do_bad; +} + #ifndef CONFIG_ARM_LPAE static int __init exceptions_init(void) { diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h index cf08bdfbe0d6..05ec5e0df32d 100644 --- a/arch/arm/mm/fault.h +++ b/arch/arm/mm/fault.h @@ -24,5 +24,6 @@ static inline int fsr_fs(unsigned int fsr) void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs); unsigned long search_exception_table(unsigned long addr); +void early_abt_enable(void); #endif /* __ARCH_ARM_FAULT_H */ diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c index 9df5f09585ca..d02f8187b1cc 100644 --- a/arch/arm/mm/highmem.c +++ b/arch/arm/mm/highmem.c @@ -147,13 +147,3 @@ void *kmap_atomic_pfn(unsigned long pfn) return (void *)vaddr; } - -struct page *kmap_atomic_to_page(const void *ptr) -{ - unsigned long vaddr = (unsigned long)ptr; - - if (vaddr < FIXADDR_START) - return virt_to_page(ptr); - - return pte_page(get_fixmap_pte(vaddr)); -} diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 7cd15143a507..4867f5daf82c 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -38,6 +38,7 @@ #include <asm/mach/pci.h> #include <asm/fixmap.h> +#include "fault.h" #include "mm.h" #include "tcm.h" @@ -1363,6 +1364,9 @@ static void __init devicemaps_init(const struct machine_desc *mdesc) */ local_flush_tlb_all(); flush_cache_all(); + + /* Enable asynchronous aborts */ + early_abt_enable(); } static void __init kmap_init(void) diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 876060bcceeb..2f4b14cfddb4 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -125,7 +125,7 @@ static u64 jit_get_skb_w(struct sk_buff *skb, int offset) } /* - * Wrapper that handles both OABI and EABI and assures Thumb2 interworking + * Wrappers which handle both OABI and EABI and assures Thumb2 interworking * (where the assembly routines like __aeabi_uidiv could cause problems). */ static u32 jit_udiv(u32 dividend, u32 divisor) @@ -133,6 +133,11 @@ static u32 jit_udiv(u32 dividend, u32 divisor) return dividend / divisor; } +static u32 jit_mod(u32 dividend, u32 divisor) +{ + return dividend % divisor; +} + static inline void _emit(int cond, u32 inst, struct jit_ctx *ctx) { inst |= (cond << 28); @@ -471,11 +476,17 @@ static inline void emit_blx_r(u8 tgt_reg, struct jit_ctx *ctx) #endif } -static inline void emit_udiv(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx) +static inline void emit_udivmod(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx, + int bpf_op) { #if __LINUX_ARM_ARCH__ == 7 if (elf_hwcap & HWCAP_IDIVA) { - emit(ARM_UDIV(rd, rm, rn), ctx); + if (bpf_op == BPF_DIV) + emit(ARM_UDIV(rd, rm, rn), ctx); + else { + emit(ARM_UDIV(ARM_R3, rm, rn), ctx); + emit(ARM_MLS(rd, rn, ARM_R3, rm), ctx); + } return; } #endif @@ -496,7 +507,8 @@ static inline void emit_udiv(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx) emit(ARM_MOV_R(ARM_R0, rm), ctx); ctx->seen |= SEEN_CALL; - emit_mov_i(ARM_R3, (u32)jit_udiv, ctx); + emit_mov_i(ARM_R3, bpf_op == BPF_DIV ? (u32)jit_udiv : (u32)jit_mod, + ctx); emit_blx_r(ARM_R3, ctx); if (rd != ARM_R0) @@ -614,6 +626,7 @@ load_common: case BPF_LD | BPF_B | BPF_IND: load_order = 0; load_ind: + update_on_xread(ctx); OP_IMM3(ARM_ADD, r_off, r_X, k, ctx); goto load_common; case BPF_LDX | BPF_IMM: @@ -697,13 +710,27 @@ load_ind: if (k == 1) break; emit_mov_i(r_scratch, k, ctx); - emit_udiv(r_A, r_A, r_scratch, ctx); + emit_udivmod(r_A, r_A, r_scratch, ctx, BPF_DIV); break; case BPF_ALU | BPF_DIV | BPF_X: update_on_xread(ctx); emit(ARM_CMP_I(r_X, 0), ctx); emit_err_ret(ARM_COND_EQ, ctx); - emit_udiv(r_A, r_A, r_X, ctx); + emit_udivmod(r_A, r_A, r_X, ctx, BPF_DIV); + break; + case BPF_ALU | BPF_MOD | BPF_K: + if (k == 1) { + emit_mov_i(r_A, 0, ctx); + break; + } + emit_mov_i(r_scratch, k, ctx); + emit_udivmod(r_A, r_A, r_scratch, ctx, BPF_MOD); + break; + case BPF_ALU | BPF_MOD | BPF_X: + update_on_xread(ctx); + emit(ARM_CMP_I(r_X, 0), ctx); + emit_err_ret(ARM_COND_EQ, ctx); + emit_udivmod(r_A, r_A, r_X, ctx, BPF_MOD); break; case BPF_ALU | BPF_OR | BPF_K: /* A |= K */ @@ -1047,7 +1074,7 @@ void bpf_jit_compile(struct bpf_prog *fp) set_memory_ro((unsigned long)header, header->pages); fp->bpf_func = (void *)ctx.target; - fp->jited = true; + fp->jited = 1; out: kfree(ctx.offsets); return; diff --git a/arch/arm/net/bpf_jit_32.h b/arch/arm/net/bpf_jit_32.h index 4b17d5ab652a..c46fca2972f7 100644 --- a/arch/arm/net/bpf_jit_32.h +++ b/arch/arm/net/bpf_jit_32.h @@ -115,6 +115,8 @@ #define ARM_INST_UMULL 0x00800090 +#define ARM_INST_MLS 0x00600090 + /* * Use a suitable undefined instruction to use for ARM/Thumb2 faulting. * We need to be careful not to conflict with those used by other modules @@ -210,4 +212,7 @@ #define ARM_UMULL(rd_lo, rd_hi, rn, rm) (ARM_INST_UMULL | (rd_hi) << 16 \ | (rd_lo) << 12 | (rm) << 8 | rn) +#define ARM_MLS(rd, rn, rm, ra) (ARM_INST_MLS | (rd) << 16 | (rn) | (rm) << 8 \ + | (ra) << 12) + #endif /* PFILTER_OPCODES_ARM_H */ diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 2235081a04ee..8861c367d061 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -495,7 +495,7 @@ void __init orion_ge00_switch_init(struct dsa_platform_data *d, int irq) d->netdev = &orion_ge00.dev; for (i = 0; i < d->nr_chips; i++) - d->chip[i].host_dev = &orion_ge00_shared.dev; + d->chip[i].host_dev = &orion_ge_mvmdio.dev; orion_switch_device.dev.platform_data = d; platform_device_register(&orion_switch_device); diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 83c7d154bde0..82074625de5c 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -1042,11 +1042,11 @@ struct platform_device s3c_device_usb_hsotg = { }, }; -void __init s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd) +void __init dwc2_hsotg_set_platdata(struct dwc2_hsotg_plat *pd) { - struct s3c_hsotg_plat *npd; + struct dwc2_hsotg_plat *npd; - npd = s3c_set_platdata(pd, sizeof(struct s3c_hsotg_plat), + npd = s3c_set_platdata(pd, sizeof(struct dwc2_hsotg_plat), &s3c_device_usb_hsotg); if (!npd->phy_init) diff --git a/arch/arm/vdso/vdsomunge.c b/arch/arm/vdso/vdsomunge.c index aedec81d1198..f6455273b2f8 100644 --- a/arch/arm/vdso/vdsomunge.c +++ b/arch/arm/vdso/vdsomunge.c @@ -45,7 +45,6 @@ * it does. */ -#include <byteswap.h> #include <elf.h> #include <errno.h> #include <fcntl.h> @@ -59,6 +58,16 @@ #include <sys/types.h> #include <unistd.h> +#define swab16(x) \ + ((((x) & 0x00ff) << 8) | \ + (((x) & 0xff00) >> 8)) + +#define swab32(x) \ + ((((x) & 0x000000ff) << 24) | \ + (((x) & 0x0000ff00) << 8) | \ + (((x) & 0x00ff0000) >> 8) | \ + (((x) & 0xff000000) >> 24)) + #if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ #define HOST_ORDER ELFDATA2LSB #elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__ @@ -104,17 +113,17 @@ static void cleanup(void) static Elf32_Word read_elf_word(Elf32_Word word, bool swap) { - return swap ? bswap_32(word) : word; + return swap ? swab32(word) : word; } static Elf32_Half read_elf_half(Elf32_Half half, bool swap) { - return swap ? bswap_16(half) : half; + return swap ? swab16(half) : half; } static void write_elf_word(Elf32_Word val, Elf32_Word *dst, bool swap) { - *dst = swap ? bswap_32(val) : val; + *dst = swap ? swab32(val) : val; } int main(int argc, char **argv) diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index eeeab074e154..fc7ea529f462 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -86,16 +86,25 @@ static void xen_percpu_init(void) int err; int cpu = get_cpu(); + /* + * VCPUOP_register_vcpu_info cannot be called twice for the same + * vcpu, so if vcpu_info is already registered, just get out. This + * can happen with cpu-hotplug. + */ + if (per_cpu(xen_vcpu, cpu) != NULL) + goto after_register_vcpu_info; + pr_info("Xen: initializing cpu%d\n", cpu); vcpup = per_cpu_ptr(xen_vcpu_info, cpu); - info.mfn = __pa(vcpup) >> PAGE_SHIFT; - info.offset = offset_in_page(vcpup); + info.mfn = virt_to_gfn(vcpup); + info.offset = xen_offset_in_page(vcpup); err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, cpu, &info); BUG_ON(err); per_cpu(xen_vcpu, cpu) = vcpup; +after_register_vcpu_info: enable_percpu_irq(xen_events_irq, 0); put_cpu(); } @@ -124,6 +133,9 @@ static int xen_cpu_notification(struct notifier_block *self, case CPU_STARTING: xen_percpu_init(); break; + case CPU_DYING: + disable_percpu_irq(xen_events_irq); + break; default: break; } @@ -213,7 +225,7 @@ static int __init xen_guest_init(void) xatp.domid = DOMID_SELF; xatp.idx = 0; xatp.space = XENMAPSPACE_shared_info; - xatp.gpfn = __pa(shared_info_page) >> PAGE_SHIFT; + xatp.gpfn = virt_to_gfn(shared_info_page); if (HYPERVISOR_memory_op(XENMEM_add_to_physmap, &xatp)) BUG(); @@ -284,7 +296,7 @@ void xen_arch_resume(void) { } void xen_arch_suspend(void) { } -/* In the hypervisor.S file. */ +/* In the hypercall.S file. */ EXPORT_SYMBOL_GPL(HYPERVISOR_event_channel_op); EXPORT_SYMBOL_GPL(HYPERVISOR_grant_table_op); EXPORT_SYMBOL_GPL(HYPERVISOR_xen_version); diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index 6dd911d1f0ac..c5f9a9e3d1f3 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -25,7 +25,7 @@ unsigned long xen_get_swiotlb_free_pages(unsigned int order) { struct memblock_region *reg; - gfp_t flags = __GFP_NOWARN; + gfp_t flags = __GFP_NOWARN|__GFP_KSWAPD_RECLAIM; for_each_memblock(memory, reg) { if (reg->base < (phys_addr_t)0xffffffff) { @@ -48,22 +48,22 @@ static void dma_cache_maint(dma_addr_t handle, unsigned long offset, size_t size, enum dma_data_direction dir, enum dma_cache_op op) { struct gnttab_cache_flush cflush; - unsigned long pfn; + unsigned long xen_pfn; size_t left = size; - pfn = (handle >> PAGE_SHIFT) + offset / PAGE_SIZE; - offset %= PAGE_SIZE; + xen_pfn = (handle >> XEN_PAGE_SHIFT) + offset / XEN_PAGE_SIZE; + offset %= XEN_PAGE_SIZE; do { size_t len = left; /* buffers in highmem or foreign pages cannot cross page * boundaries */ - if (len + offset > PAGE_SIZE) - len = PAGE_SIZE - offset; + if (len + offset > XEN_PAGE_SIZE) + len = XEN_PAGE_SIZE - offset; cflush.op = 0; - cflush.a.dev_bus_addr = pfn << PAGE_SHIFT; + cflush.a.dev_bus_addr = xen_pfn << XEN_PAGE_SHIFT; cflush.offset = offset; cflush.length = len; @@ -79,7 +79,7 @@ static void dma_cache_maint(dma_addr_t handle, unsigned long offset, HYPERVISOR_grant_table_op(GNTTABOP_cache_flush, &cflush, 1); offset = 0; - pfn++; + xen_pfn++; left -= len; } while (left); } @@ -138,10 +138,29 @@ void __xen_dma_sync_single_for_device(struct device *hwdev, } bool xen_arch_need_swiotlb(struct device *dev, - unsigned long pfn, - unsigned long bfn) + phys_addr_t phys, + dma_addr_t dev_addr) { - return (!hypercall_cflush && (pfn != bfn) && !is_device_dma_coherent(dev)); + unsigned int xen_pfn = XEN_PFN_DOWN(phys); + unsigned int bfn = XEN_PFN_DOWN(dev_addr); + + /* + * The swiotlb buffer should be used if + * - Xen doesn't have the cache flush hypercall + * - The Linux page refers to foreign memory + * - The device doesn't support coherent DMA request + * + * The Linux page may be spanned acrros multiple Xen page, although + * it's not possible to have a mix of local and foreign Xen page. + * Furthermore, range_straddles_page_boundary is already checking + * if buffer is physically contiguous in the host RAM. + * + * Therefore we only need to check the first Xen page to know if we + * require a bounce buffer because the device doesn't support coherent + * memory and we are not able to flush the cache. + */ + return (!hypercall_cflush && (xen_pfn != bfn) && + !is_device_dma_coherent(dev)); } int xen_create_contiguous_region(phys_addr_t pstart, unsigned int order, diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c index 887596c67b12..0ed01f2d5ee4 100644 --- a/arch/arm/xen/p2m.c +++ b/arch/arm/xen/p2m.c @@ -93,8 +93,8 @@ int set_foreign_p2m_mapping(struct gnttab_map_grant_ref *map_ops, for (i = 0; i < count; i++) { if (map_ops[i].status) continue; - set_phys_to_machine(map_ops[i].host_addr >> PAGE_SHIFT, - map_ops[i].dev_bus_addr >> PAGE_SHIFT); + set_phys_to_machine(map_ops[i].host_addr >> XEN_PAGE_SHIFT, + map_ops[i].dev_bus_addr >> XEN_PAGE_SHIFT); } return 0; @@ -108,7 +108,7 @@ int clear_foreign_p2m_mapping(struct gnttab_unmap_grant_ref *unmap_ops, int i; for (i = 0; i < count; i++) { - set_phys_to_machine(unmap_ops[i].host_addr >> PAGE_SHIFT, + set_phys_to_machine(unmap_ops[i].host_addr >> XEN_PAGE_SHIFT, INVALID_P2M_ENTRY); } |